This adds test which checks case when data of newly received skbuff is
appended to the last skbuff in the socket's queue. It looks like simple
test with 'send()' and 'recv()', but internally it triggers logic which
appends one received skbuff to another. Test checks that this feature
works correctly.
This test is actual only for virtio transport.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Current release - regressions:
- wifi: mt76: mt7915: add back 160MHz channel width support for MT7915
- libbpf: revert poisoning of strlcpy, it broke uClibc-ng
Current release - new code bugs:
- bpf: improve the coverage of the "allow reads from uninit stack"
feature to fix verification complexity problems
- eth: am65-cpts: reset PPS genf adj settings on enable
Previous releases - regressions:
- wifi: mac80211: serialize ieee80211_handle_wake_tx_queue()
- wifi: mt76: do not run mt76_unregister_device() on unregistered hw,
fix null-deref
- Bluetooth: btqcomsmd: fix command timeout after setting BD address
- eth: igb: revert rtnl_lock() that causes a deadlock
- dsa: mscc: ocelot: fix device specific statistics
Previous releases - always broken:
- xsk: add missing overflow check in xdp_umem_reg()
- wifi: mac80211:
- fix QoS on mesh interfaces
- fix mesh path discovery based on unicast packets
- Bluetooth:
- ISO: fix timestamped HCI ISO data packet parsing
- remove "Power-on" check from Mesh feature
- usbnet: more fixes to drivers trusting packet length
- wifi: iwlwifi: mvm: fix mvmtxq->stopped handling
- Bluetooth: btintel: iterate only bluetooth device ACPI entries
- eth: iavf: fix inverted Rx hash condition leading to disabled hash
- eth: igc: fix the validation logic for taprio's gate list
- dsa: tag_brcm: legacy: fix daisy-chained switches
Misc:
- bpf: adjust insufficient default bpf_jit_limit to account for
growth of BPF use over the last 5 years
- xdp: bpf_xdp_metadata() use EOPNOTSUPP as unique errno indicating
no driver support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmQc4vkACgkQMUZtbf5S
IruG/w//XixBtdFMHE0/fcGv77jTovlJNiDYeaa+KtyjvIseieYwOKW5F31r3xvl
Mf/YhNEjAc++V8Zna/1UM5i/WOj1PJdHgSC+wMUGUXjMF+MfzL57nM83CllOpUB5
Z9YtUqGfolf2Vtx03wnV14qawmVnJWYKHn3AU11cueE5dUu6KNyBTCefQ7uzgcJN
zMtHAxw96MRQIDxSfKvZsePk4FnQ4qoSOLkslji5iikcMnKePaqZaxQla2oTcEIR
zue9V+ILmi62Y8mPcdT4ePpZQsjB39bpemh+9EL6l03/cjsjqmuiCw/d1+6g9kuy
ZD5LgZzUOb6xalhSseiwJL+vj8x2gQhshEfoHQvgp7fzr6agta6sisRX611wtmJl
hv4k2PMRqFrMv2S+8m8XC177bXIaGbiWh4vBFOWjf4u0lG55cGlzclbXWWQ80njy
C5cE4V7qPRk8Cl/+uT10CLNQx6JmaX8kcddtFrYpu0PZHKx1WfUYKIpgkiiMPRKT
njLkDQbFRa8Y3p7UX0wU1TbeuMzzLz+aTBrFEN864IJmbnUnWimeluQzD60WbkSx
6dciqq11LtvYDsR1HZ1pb7IoHYuDsDrO2Rx4zuqsB/SyfrGdRKJoKOnYvsk+AdCL
N/e4wivie8s6b+G3yL6p+IdlpEaVo2ZiLINp7JSW8jhW1hRcZUI=
=XBLi
-----END PGP SIGNATURE-----
Merge tag 'net-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi and bluetooth.
Current release - regressions:
- wifi: mt76: mt7915: add back 160MHz channel width support for
MT7915
- libbpf: revert poisoning of strlcpy, it broke uClibc-ng
Current release - new code bugs:
- bpf: improve the coverage of the "allow reads from uninit stack"
feature to fix verification complexity problems
- eth: am65-cpts: reset PPS genf adj settings on enable
Previous releases - regressions:
- wifi: mac80211: serialize ieee80211_handle_wake_tx_queue()
- wifi: mt76: do not run mt76_unregister_device() on unregistered hw,
fix null-deref
- Bluetooth: btqcomsmd: fix command timeout after setting BD address
- eth: igb: revert rtnl_lock() that causes a deadlock
- dsa: mscc: ocelot: fix device specific statistics
Previous releases - always broken:
- xsk: add missing overflow check in xdp_umem_reg()
- wifi: mac80211:
- fix QoS on mesh interfaces
- fix mesh path discovery based on unicast packets
- Bluetooth:
- ISO: fix timestamped HCI ISO data packet parsing
- remove "Power-on" check from Mesh feature
- usbnet: more fixes to drivers trusting packet length
- wifi: iwlwifi: mvm: fix mvmtxq->stopped handling
- Bluetooth: btintel: iterate only bluetooth device ACPI entries
- eth: iavf: fix inverted Rx hash condition leading to disabled hash
- eth: igc: fix the validation logic for taprio's gate list
- dsa: tag_brcm: legacy: fix daisy-chained switches
Misc:
- bpf: adjust insufficient default bpf_jit_limit to account for
growth of BPF use over the last 5 years
- xdp: bpf_xdp_metadata() use EOPNOTSUPP as unique errno indicating
no driver support"
* tag 'net-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
Bluetooth: HCI: Fix global-out-of-bounds
Bluetooth: mgmt: Fix MGMT add advmon with RSSI command
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work
Bluetooth: L2CAP: Fix responding with wrong PDU type
Bluetooth: btqcomsmd: Fix command timeout after setting BD address
Bluetooth: btinel: Check ACPI handle for NULL before accessing
net: mdio: thunder: Add missing fwnode_handle_put()
net: dsa: mt7530: move setting ssc_delta to PHY_INTERFACE_MODE_TRGMII case
net: dsa: mt7530: move lowering TRGMII driving to mt7530_setup()
net: dsa: mt7530: move enabling disabling core clock to mt7530_pll_setup()
net: asix: fix modprobe "sysfs: cannot create duplicate filename"
gve: Cache link_speed value from device
tools: ynl: Fix genlmsg header encoding formats
net: enetc: fix aggregate RMON counters not showing the ranges
Bluetooth: Remove "Power-on" check from Mesh feature
Bluetooth: Fix race condition in hci_cmd_sync_clear
Bluetooth: btintel: Iterate only bluetooth device ACPI entries
Bluetooth: ISO: fix timestamped HCI ISO data packet parsing
Bluetooth: btusb: Remove detection of ISO packets over bulk
Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZBzSGQAKCRDbK58LschI
g+dhAP95enbrlwaQ+9aoqrU+GqCq+uo4SkaqnUtq6GSvRNiVBQD8C6iZxrAjyXnm
1wRr3JN/HszPBzgjl3HvDc9y69I/PAI=
=8JwR
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-03-23
We've added 8 non-merge commits during the last 13 day(s) which contain
a total of 21 files changed, 238 insertions(+), 161 deletions(-).
The main changes are:
1) Fix verification issues in some BPF programs due to their stack usage
patterns, from Eduard Zingerman.
2) Fix to add missing overflow checks in xdp_umem_reg and return an error
in such case, from Kal Conley.
3) Fix and undo poisoning of strlcpy in libbpf given it broke builds for
libcs which provided the former like uClibc-ng, from Jesus Sanchez-Palencia.
4) Fix insufficient bpf_jit_limit default to avoid users running into hard
to debug seccomp BPF errors, from Daniel Borkmann.
5) Fix driver return code when they don't support a bpf_xdp_metadata kfunc
to make it unambiguous from other errors, from Jesper Dangaard Brouer.
6) Two BPF selftest fixes to address compilation errors from recent changes
in kernel structures, from Alexei Starovoitov.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xdp: bpf_xdp_metadata use EOPNOTSUPP for no driver support
bpf: Adjust insufficient default bpf_jit_limit
xsk: Add missing overflow check in xdp_umem_reg
selftests/bpf: Fix progs/test_deny_namespace.c issues.
selftests/bpf: Fix progs/find_vma_fail1.c build error.
libbpf: Revert poisoning of strlcpy
selftests/bpf: Tests for uninitialized stack reads
bpf: Allow reads from uninit stack
====================
Link: https://lore.kernel.org/r/20230323225221.6082-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pack strings use 'b' signed char for cmd and version but struct
genlmsghdr defines them as unsigned char. Use 'B' instead.
Fixes: 4e4480e89c ("tools: ynl: move the cli and netlink code around")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20230319193803.97453-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 6c40624930 ("bootconfig: Increase max nodes of bootconfig
from 1024 to 8192 for DCC support") increased the max number of bootconfig
node to 8192, the bootconfig testcase of the max number of nodes fails.
To fix this issue, we can not simply increase the number in the test script
because the test bootconfig file becomes too big (>32KB). To fix that, we
can use a combination of three alphabets (26^3 = 17576). But with that,
we can not express the 8193 (just one exceed from the limitation) because
it also exceeds the max size of bootconfig. So, the first 26 nodes will just
use one alphabet.
With this fix, test-bootconfig.sh passes all tests.
Link: https://lore.kernel.org/all/167888844790.791176.670805252426835131.stgit@devnote2/
Reported-by: Heinz Wiesinger <pprkut@slackware.com>
Link: https://lore.kernel.org/all/2463802.XAFRqVoOGU@amaterasu.liwjatan.org
Fixes: 6c40624930 ("bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC support")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Current release - regressions:
- phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol()
- virtio: vsock: don't use skbuff state to account credit
- virtio: vsock: don't drop skbuff on copy failure
- virtio_net: fix page_to_skb() miscalculating the memory size
Current release - new code bugs:
- eth: correct xdp_features after device reconfig
- wifi: nl80211: fix the puncturing bitmap policy
- net/mlx5e: flower:
- fix raw counter initialization
- fix missing error code
- fix cloned flow attribute
- ipa:
- fix some register validity checks
- fix a surprising number of bad offsets
- kill FILT_ROUT_CACHE_CFG IPA register
Previous releases - regressions:
- tcp: fix bind() conflict check for dual-stack wildcard address
- veth: fix use after free in XDP_REDIRECT when skb headroom is small
- ipv4: fix incorrect table ID in IOCTL path
- ipvlan: make skb->skb_iif track skb->dev for l3s mode
- mptcp:
- fix possible deadlock in subflow_error_report
- fix UaFs when destroying unaccepted and listening sockets
- dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290
Previous releases - always broken:
- tcp: tcp_make_synack() can be called from process context,
don't assume preemption is disabled when updating stats
- netfilter: correct length for loading protocol registers
- virtio_net: add checking sq is full inside xdp xmit
- bonding: restore IFF_MASTER/SLAVE flags on bond enslave
Ethertype change
- phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number
- eth: i40e: fix crash during reboot when adapter is in recovery mode
- eth: ice: avoid deadlock on rtnl lock when auxiliary device
plug/unplug meets bonding
- dsa: mt7530:
- remove now incorrect comment regarding port 5
- set PLL frequency and trgmii only when trgmii is used
- eth: mtk_eth_soc: reset PCS state when changing interface types
Misc:
- ynl: another license adjustment
- move the TCA_EXT_WARN_MSG attribute for tc action
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5/YI
-----END PGP SIGNATURE-----
Merge tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wifi and ipsec.
A little more changes than usual, but it's pretty normal for us that
the rc3/rc4 PRs are oversized as people start testing in earnest.
Possibly an extra boost from people deploying the 6.1 LTS but that's
more of an unscientific hunch.
Current release - regressions:
- phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol()
- virtio: vsock: don't use skbuff state to account credit
- virtio: vsock: don't drop skbuff on copy failure
- virtio_net: fix page_to_skb() miscalculating the memory size
Current release - new code bugs:
- eth: correct xdp_features after device reconfig
- wifi: nl80211: fix the puncturing bitmap policy
- net/mlx5e: flower:
- fix raw counter initialization
- fix missing error code
- fix cloned flow attribute
- ipa:
- fix some register validity checks
- fix a surprising number of bad offsets
- kill FILT_ROUT_CACHE_CFG IPA register
Previous releases - regressions:
- tcp: fix bind() conflict check for dual-stack wildcard address
- veth: fix use after free in XDP_REDIRECT when skb headroom is small
- ipv4: fix incorrect table ID in IOCTL path
- ipvlan: make skb->skb_iif track skb->dev for l3s mode
- mptcp:
- fix possible deadlock in subflow_error_report
- fix UaFs when destroying unaccepted and listening sockets
- dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290
Previous releases - always broken:
- tcp: tcp_make_synack() can be called from process context, don't
assume preemption is disabled when updating stats
- netfilter: correct length for loading protocol registers
- virtio_net: add checking sq is full inside xdp xmit
- bonding: restore IFF_MASTER/SLAVE flags on bond enslave Ethertype
change
- phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number
- eth: i40e: fix crash during reboot when adapter is in recovery mode
- eth: ice: avoid deadlock on rtnl lock when auxiliary device
plug/unplug meets bonding
- dsa: mt7530:
- remove now incorrect comment regarding port 5
- set PLL frequency and trgmii only when trgmii is used
- eth: mtk_eth_soc: reset PCS state when changing interface types
Misc:
- ynl: another license adjustment
- move the TCA_EXT_WARN_MSG attribute for tc action"
* tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
selftests: bonding: add tests for ether type changes
bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails
bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change
net: renesas: rswitch: Fix GWTSDIE register handling
net: renesas: rswitch: Fix the output value of quote from rswitch_rx()
ethernet: sun: add check for the mdesc_grab()
net: ipa: fix some register validity checks
net: ipa: kill FILT_ROUT_CACHE_CFG IPA register
net: ipa: add two missing declarations
net: ipa: reg: include <linux/bug.h>
net: xdp: don't call notifiers during driver init
net/sched: act_api: add specific EXT_WARN_MSG for tc action
Revert "net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
net: dsa: microchip: fix RGMII delay configuration on KSZ8765/KSZ8794/KSZ8795
ynl: make the tooling check the license
ynl: broaden the license even more
tools: ynl: make definitions optional again
hsr: ratelimit only when errors are printed
qed/qed_mng_tlv: correctly zero out ->min instead of ->hour
selftests: net: devlink_port_split.py: skip test if no suitable device available
...
- Fix the psci_pd_init_topology() failure path in the PSCI cpuidle
driver (Shawn Guo).
- Modify the sleepgraph utility so it does not crash on binary data
in device names (Todd Brandt).
-----BEGIN PGP SIGNATURE-----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=nILD
-----END PGP SIGNATURE-----
Merge tag 'pm-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an error code path issue in a cpuidle driver and make the
sleepgraph utility more robust against unexpected input.
Specifics:
- Fix the psci_pd_init_topology() failure path in the PSCI cpuidle
driver (Shawn Guo)
- Modify the sleepgraph utility so it does not crash on binary data
in device names (Todd Brandt)"
* tag 'pm-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
pm-graph: sleepgraph: Avoid crashing on binary data in device names
cpuidle: psci: Iterate backwards over list in psci_pd_remove()
- Fix ACPI PPTT handling to avoid sleep in the atomic context when it
is not present (Sudeep Holla).
- Add backlight=native DMI quirk for Dell Vostro 15 3535 to the ACPI
video driver (Chia-Lin Kao).
- Add ACPI quirks for I2C device enumeration on Lenovo Yoga Book X90
and Acer Iconia One 7 B1-750 (Hans de Goede).
- Fix handling of invalid command line option values in the ACPI pfrut
utility (Chen Yu).
- Fix references to I2C device data type in the ACPI documentation for
device enumeration (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----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=biWv
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These add some new quirks, fix PPTT handling, fix an ACPI utility and
correct a mistake in the ACPI documentation.
Specifics:
- Fix ACPI PPTT handling to avoid sleep in the atomic context when it
is not present (Sudeep Holla)
- Add 'backlight=native' DMI quirk for Dell Vostro 15 3535 to the
ACPI video driver (Chia-Lin Kao)
- Add ACPI quirks for I2C device enumeration on Lenovo Yoga Book X90
and Acer Iconia One 7 B1-750 (Hans de Goede)
- Fix handling of invalid command line option values in the ACPI
pfrut utility (Chen Yu)
- Fix references to I2C device data type in the ACPI documentation
for device enumeration (Andy Shevchenko)"
* tag 'acpi-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: tools: pfrut: Check if the input of level and type is in the right numeric range
ACPI: PPTT: Fix to avoid sleep in the atomic context when PPTT is absent
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Book X90
ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 7 B1-750
ACPI: x86: Introduce an acpi_quirk_skip_gpio_event_handlers() helper
ACPI: video: Add backlight=native DMI quirk for Dell Vostro 15 3535
ACPI: docs: enumeration: Correct reference to the I²C device data type
Pull turbostat fweaks and fixes from Len Brown:
"Leprechaun sized fixes and tweaks touching only turbostat.
'Keeping happy users happy since 2010'"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2023.03.17
tools/power turbostat: fix decoding of HWP_STATUS
tools/power turbostat: Introduce support for EMR
tools/power turbostat: remove stray newlines from warn/warnx strings
tools/power turbostat: Fix /dev/cpu_dma_latency warnings
tools/power turbostat: Provide better debug messages for failed capabilities accesses
tools/power turbostat: update dump of SECONDARY_TURBO_RATIO_LIMIT
The "excursion to minimum" information is in bit2
in HWP_STATUS MSR. Fix the bitmask used for
decoding the register.
Signed-off-by: Antti Laakso <antti.laakso@intel.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Introduce support for EMR.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
When running as non-root the following error is seen in turbostat:
turbostat: fopen /dev/cpu_dma_latency
: Permission denied
turbostat and the man page have information on how to avoid other
permission errors, so these can be fixed the same way.
Provide better /dev/cpu_dma_latency warnings that provide instructions on
how to avoid the error, and update the man page.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
turbostat reports some capabilities access errors and not others. Provide
the same debug message for all errors.
[lenb: remove extra quotes]
Cc: David Arcari <darcari@redhat.com>
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add new network selftests for the bonding device which exercise the ether
type changing call paths. They also test for the recent syzbot bug[1] which
causes a warning and results in wrong device flags (IFF_SLAVE missing).
The test adds three bond devices and a nlmon device, enslaves one of the
bond devices to the other and then uses the nlmon device for successful
and unsuccesful enslaves both of which change the bond ether type. Thus
we can test for both MASTER and SLAVE flags at the same time.
If the flags are properly restored we get:
TEST: Change ether type of an enslaved bond device with unsuccessful enslave [ OK ]
TEST: Change ether type of an enslaved bond device with successful enslave [ OK ]
[1] https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The (only recently documented) expectation is that all specs
are under a certain license, but we don't actually enforce it.
What's worse we then go ahead and assume the license was right,
outputting the expected license into generated files.
Fixes: 37d9df224d ("ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I relicensed Netlink spec code to GPL-2.0 OR BSD-3-Clause but
we still put a slightly different license on the uAPI header
than the rest of the code. Use the Linux-syscall-note on all
the specs and all generated code. It's moot for kernel code,
but should not hurt. This way the licenses match everywhere.
Cc: Chuck Lever <chuck.lever@oracle.com>
Fixes: 37d9df224d ("ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
definitions are optional, commit in question breaks cli for ethtool.
Fixes: 6517a60b03 ("tools: ynl: move the enum classes to shared code")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The `devlink -j port show` command output may not contain the "flavour"
key, an example from Ubuntu 22.10 s390x LPAR(5.19.0-37-generic), with
mlx4 driver and iproute2-5.15.0:
{"port":{"pci/0001:00:00.0/1":{"type":"eth","netdev":"ens301"},
"pci/0001:00:00.0/2":{"type":"eth","netdev":"ens301d1"},
"pci/0002:00:00.0/1":{"type":"eth","netdev":"ens317"},
"pci/0002:00:00.0/2":{"type":"eth","netdev":"ens317d1"}}}
This will cause a KeyError exception.
Create a validate_devlink_output() to check for this "flavour" from
devlink command output to avoid this KeyError exception. Also let
it handle the check for `devlink -j dev show` output in main().
Apart from this, if the test was not started because the max lanes of
the designated device is 0. The script will still return 0 and thus
causing a false-negative test result.
Use a found_max_lanes flag to determine if these tests were skipped
due to this reason and return KSFT_SKIP to make it more clear.
Link: https://bugs.launchpad.net/bugs/1937133
Fixes: f3348a82e7 ("selftests: net: Add port split test")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Link: https://lore.kernel.org/r/20230315165353.229590-1-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Address a rather annoying bug w.r.t. guest timer offsetting. The
synchronization of timer offsets between vCPUs was broken, leading to
inconsistent timer reads within the VM.
x86:
* New tests for the slow path of the EVTCHNOP_send Xen hypercall
* Add missing nVMX consistency checks for CR0 and CR4
* Fix bug that broke AMD GATag on 512 vCPU machines
Selftests:
* Skip hugetlb tests if huge pages are not available
* Sync KVM exit reasons
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmQQhBMUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPJsAf/aqKQtRJH2YDHuS/OvlH546lgrPTY
zc2S187N4OofqKvm8HWAJOPravGI4Lkc3Jvlq2jPnlwl66musfako5YGXyyJesIP
9pc32jxwbhpHyp39tSTxlNbjE68E4Tau2iFa5n6fq/2BOEkZNGRhTDWPfbJV4yZO
JpkaguNm1nuZfKnRNxaaYhJwbqPIBc8l+Y3Q3nw6QLZHaNoupsd2pY3c4SuTYFcW
UxUaFtNkpXQxbwve0MWFLh/JztOzFhQcdMi3OSTBYZz32T0vncjXFDuARfKLNKyw
FgwkHgs2/d35AgE0JEwz1u6+/RMHvUheG08zkp8//lINfNgF/Cka7Dz2uA==
=B1LI
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Address a rather annoying bug w.r.t. guest timer offsetting. The
synchronization of timer offsets between vCPUs was broken, leading
to inconsistent timer reads within the VM.
x86:
- New tests for the slow path of the EVTCHNOP_send Xen hypercall
- Add missing nVMX consistency checks for CR0 and CR4
- Fix bug that broke AMD GATag on 512 vCPU machines
Selftests:
- Skip hugetlb tests if huge pages are not available
- Sync KVM exit reasons"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Sync KVM exit reasons in selftests
KVM: selftests: Add macro to generate KVM exit reason strings
KVM: selftests: Print expected and actual exit reason in KVM exit reason assert
KVM: selftests: Make vCPU exit reason test assertion common
KVM: selftests: Add EVTCHNOP_send slow path test to xen_shinfo_test
KVM: selftests: Use enum for test numbers in xen_shinfo_test
KVM: selftests: Add helpers to make Xen-style VMCALL/VMMCALL hypercalls
KVM: selftests: Move the guts of kvm_hypercall() to a separate macro
KVM: SVM: WARN if GATag generation drops VM or vCPU ID information
KVM: SVM: Modify AVIC GATag to support max number of 512 vCPUs
KVM: SVM: Fix a benign off-by-one bug in AVIC physical table mask
selftests: KVM: skip hugetlb tests if huge pages are not available
KVM: VMX: Use tabs instead of spaces for indentation
KVM: VMX: Fix indentation coding style issue
KVM: nVMX: remove unnecessary #ifdef
KVM: nVMX: add missing consistency checks for CR0 and CR4
KVM: arm64: timers: Convert per-vcpu virtual offset to a global value
This adds SOCK_STREAM and SOCK_SEQPACKET tests for invalid buffer case.
It tries to read data to NULL buffer (data already presents in socket's
queue), then uses valid buffer. For SOCK_STREAM second read must return
data, because skbuff is not dropped, but for SOCK_SEQPACKET skbuff will
be dropped by kernel, and 'recv()' will return EAGAIN.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This kselftest fixes update for Linux 6.3-rc3 consists of a fix to
amd-pstate test Makefile and a fix to LLVM build for i386 and x86_64
in kselftest common lib.mk.
-----BEGIN PGP SIGNATURE-----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=ITKW
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"A fix to amd-pstate test Makefile and a fix to LLVM build for x86 in
kselftest common lib.mk"
* tag 'linux-kselftest-fixes-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: fix LLVM build for i386 and x86_64
selftests: amd-pstate: fix TEST_FILES
The test checks if (IPv4, IPv6) address pair properly conflict or not.
* IPv4
* 0.0.0.0
* 127.0.0.1
* IPv6
* ::
* ::1
If the IPv6 address is [::], the second bind() always fails.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The user provides arbitrary non-numeic value to level and type,
which could bring unexpected behavior. In this case the expected
behavior would be to throw an error.
pfrut -h
usage: pfrut [OPTIONS]
code injection:
-l, --load
-s, --stage
-a, --activate
-u, --update [stage and activate]
-q, --query
-d, --revid
update telemetry:
-G, --getloginfo
-T, --type(0:execution, 1:history)
-L, --level(0, 1, 2, 4)
-R, --read
-D, --revid log
pfrut -T A
pfrut -G
log_level:0
log_type:0
log_revid:2
max_data_size:65536
chunk1_size:0
chunk2_size:1530
rollover_cnt:0
reset_cnt:17
Fix this by restricting the input to be in the expected range.
Reported-by: Hariganesh Govindarajulu <hariganesh.govindarajulu@intel.com>
Suggested-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A regression has occurred in the hid-sensor code where a device
name string has not been initialized to 0, and ends up without
a NULL char and is printed with %s. This includes random binary
data in the device name, which makes its way into the ftrace output
and ends up crashing sleepgraph because it expects the ftrace output
to be ASCII only.
For example: "HID-SENSOR-INT-020b?.39.auto" ends up in ftrace instead
of "HID-SENSOR-INT-020b.39.auto". It causes this crash in sleepgraph:
File "/usr/bin/sleepgraph", line 5579, in executeSuspend
for line in fp:
File "/usr/lib/python3.10/codecs.py", line 322, in decode
(result, consumed) = self._buffer_decode(data, self.errors, final)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xff in position
1568: invalid start byte
The issue is present in 6.3-rc1 and is described in full here:
https://bugzilla.kernel.org/show_bug.cgi?id=217169
A separate fix has been submitted to have this issue repaired, but
it has also exposed a larger bug in sleepgraph, since nothing should
make sleepgraph crash. Sleepgraph needs to be able to handle binary
data showing up in ftrace gracefully.
Modify the ftrace processing code to treat it as potentially binary
and to filter out binary data and leave just the ASCII.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217169
Fixes: 98c062e824 ("HID: hid-sensor-custom: Allow more custom iio sensors")
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add and use a macro to generate the KVM exit reason strings array
instead of relying on developers to correctly copy+paste+edit each
string.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204014547.583711-4-vipinsh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Print what KVM exit reason a test was expecting and what it actually
got int TEST_ASSERT_KVM_EXIT_REASON().
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Message-Id: <20230204014547.583711-3-vipinsh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make TEST_ASSERT_KVM_EXIT_REASON() macro and replace all exit reason
test assert statements with it.
No functional changes intended.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Message-Id: <20230204014547.583711-2-vipinsh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When kvm_xen_evtchn_send() takes the slow path because the shinfo GPC
needs to be revalidated, it used to violate the SRCU vs. kvm->lock
locking rules and potentially cause a deadlock.
Now that lockdep is learning to catch such things, make sure that code
path is exercised by the selftest.
Link: https://lore.kernel.org/all/20230113124606.10221-2-dwmw2@infradead.org
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The xen_shinfo_test started off with very few iterations, and the numbers
we used in GUEST_SYNC() were precisely mapped to the RUNSTATE_xxx values
anyway to start with.
It has since grown quite a few more tests, and it's kind of awful to be
handling them all as bare numbers. Especially when I want to add a new
test in the middle. Define an enum for the test stages, and use it both
in the guest code and the host switch statement.
No functional change, if I can count to 24.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add wrappers to do hypercalls using VMCALL/VMMCALL and Xen's register ABI
(as opposed to full Xen-style hypercalls through a hypervisor provided
page). Using the common helpers dedups a pile of code, and uses the
native hypercall instruction when running on AMD.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the guts of kvm_hypercall() to a macro so that Xen hypercalls,
which have a different register ABI, can reuse the VMCALL vs. VMMCALL
logic.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now, if KVM memory stress tests are run with hugetlb sources but hugetlb is
not available (either in the kernel or because /proc/sys/vm/nr_hugepages is 0)
the test will fail with a memory allocation error.
This makes it impossible to add tests that default to hugetlb-backed memory,
because on a machine with a default configuration they will fail. Therefore,
check HugePages_Total as well and, if zero, direct the user to enable hugepages
in procfs. Furthermore, return KSFT_SKIP whenever hugetlb is not available.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge commit bf9bec4cb3 ("Merge branch 'bpf: Allow reads from uninit stack'")
from bpf-next to bpf tree to address verification issues in some programs
due to stack usage.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some fixes accumulated so far.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQOwvcPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp2msH/0EwXAZCieuUnRU2c3wGEYnP+wnQbIBH3aUJ
mpC3vFR9Bdo2bhxYcRjSJ+tUqWmUPn+0XZ8dYR9zu4lDli69cbWflij0+AJ/iGEe
Rm6vhzq9KB4CKRulaW7gEdY+nXaIdoCAhdiI8Ka5QHd17wtnQ7X8g7HJRk+6m8hy
tMfm8osrDXcHSGClipHKkw63n2vflAwA0cLfQjZYec4gwIMqOIDrztvvPJorxTLo
NNHUF1wzyYCiVoWotDjfNcEiYULbSSE3Gau8KDyF6Y1VrkfyakXDAiH77GlttPuv
j7DGIuWUGn84/z51C2HY164ux/bfWwKUHntGk6NvliZDWqeo718=
=6O4V
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Some virtio / vhost / vdpa fixes accumulated so far"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
tools/virtio: Ignore virtio-trace/trace-agent
vdpa_sim: set last_used_idx as last_avail_idx in vdpasim_queue_ready
vhost-vdpa: free iommu domain after last use during cleanup
vdpa/mlx5: should not activate virtq object when suspended
vp_vdpa: fix the crash in hot unplug with vp_vdpa
since commit 108fc82596e3("tools: Add guest trace agent as a user tool")
introduce virtio-trace/trace-agent, it should be ignored in the git tree.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_52B2BC2F47540A5FEB46E710BD0C8485B409@qq.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZA2l2QAKCRCRxhvAZXjc
okR1AP9UjPVvVTU3DRp7Giqyv1rdv/iaCVRtEDQmhzDflksioQEAyJXTt+3YOTNl
sSocNYBhVBsijelICeq7hZrmVP9CrgM=
=C0cC
-----END PGP SIGNATURE-----
Merge tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux
Pull clone3 fix from Christian Brauner:
"A simple fix for the clone3() system call.
The CLONE_NEWTIME allows the creation of time namespaces. The flag
reuses a bit from the CSIGNAL bits that are used in the legacy clone()
system call to set the signal that gets sent to the parent after the
child exits.
The clone3() system call doesn't rely on CSIGNAL anymore as it uses a
dedicated .exit_signal field in struct clone_args. So we blocked all
CSIGNAL bits in clone3_args_valid(). When CLONE_NEWTIME was introduced
and reused a CSIGNAL bit we forgot to adapt clone3_args_valid()
causing CLONE_NEWTIME with clone3() to be rejected. Fix this"
* tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
selftests/clone3: test clone3 with CLONE_NEWTIME
fork: allow CLONE_NEWTIME in clone3 flags
In case of errors, the printed message had the expected and the seen
value inverted.
This patch simply correct the order: first the expected value, then the
one that has been seen.
Fixes: 10d4273411 ("selftests: mptcp: userspace: print error details if any")
Cc: stable@vger.kernel.org
Acked-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce xdp_set_features_flag utility routine in order to update
dynamically xdp_features according to the dynamic hw configuration via
ethtool (e.g. changing number of hw rx/tx queues).
Add xdp_clear_features_flag() in order to clear all xdp_feature flag.
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix get_mask utility routine in order to take into account possible gaps
in the elements list.
Fixes: be5bea1cc0 ("net: add basic C code generators for Netlink")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Properly manage render-max property for flags definition type
introducing mask value and setting it to (last_element << 1) - 1
instead of adding max value set to last_element + 1
Fixes: be5bea1cc0 ("net: add basic C code generators for Netlink")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following build error can be seen:
progs/test_deny_namespace.c:22:19: error: call to undeclared function 'BIT_LL'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
__u64 cap_mask = BIT_LL(CAP_SYS_ADMIN);
The struct kernel_cap_struct no longer exists in the kernel as well.
Adjust bpf prog to fix both issues.
Fixes: f122a08b19 ("capability: just use a 'u64' instead of a 'u32[2]' array")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The commit 11e456cae9 ("selftests/bpf: Fix compilation errors: Assign a value to a constant")
fixed the issue cleanly in bpf-next.
This is an alternative fix in bpf tree to avoid merge conflict between bpf and bpf-next.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This reverts commit 6d0c4b11e743("libbpf: Poison strlcpy()").
It added the pragma poison directive to libbpf_internal.h to protect
against accidental usage of strlcpy but ended up breaking the build for
toolchains based on libcs which provide the strlcpy() declaration from
string.h (e.g. uClibc-ng). The include order which causes the issue is:
string.h,
from Iibbpf_common.h:12,
from libbpf.h:20,
from libbpf_internal.h:26,
from strset.c:9:
Fixes: 6d0c4b11e7 ("libbpf: Poison strlcpy()")
Signed-off-by: Jesus Sanchez-Palencia <jesussanp@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230309004836.2808610-1-jesussanp@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Add Adrian Hunter to MAINTAINERS as a perf tools reviewer.
- Sync various tools/ copies of kernel headers with the kernel sources, this
time trying to avoid first merging with upstream to then update but instead
copy from upstream so that a merge is avoided and the end result after merging
this pull request is the one expected, tools/perf/check-headers.sh (mostly)
happy, less warnings while building tools/perf/.
- Fix counting when initial delay configured by setting
perf_attr.enable_on_exec when starting workloads from the perf command line.
- Don't avoid emitting a PERF_RECORD_MMAP2 in 'perf inject --buildid-all' when
that record comes with a build-id, otherwise we end up not being able to
resolve symbols.
- Don't use comma as the CSV output separator the "stat+csv_output" test, as
comma can appear on some tests as a modifier for an event, use @ instead,
ditto for the JSON linter test.
- The offcpu test was looking for some bits being set on
task_struct->prev_state without masking other bits not important for this
specific 'perf test', fix it.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZApKjQAKCRCyPKLppCJ+
JzdfAQDRnwDCxhb4cvx7lVR32L1XMIFW6qLWRBJWoxC2SJi6lgD/SoQgKswkxrJv
XnBP7jEaIsh3M3ak82MxLKbjSAEvnwk=
=jup7
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.3-1-2023-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Add Adrian Hunter to MAINTAINERS as a perf tools reviewer
- Sync various tools/ copies of kernel headers with the kernel sources,
this time trying to avoid first merging with upstream to then update
but instead copy from upstream so that a merge is avoided and the end
result after merging this pull request is the one expected,
tools/perf/check-headers.sh (mostly) happy, less warnings while
building tools/perf/
- Fix counting when initial delay configured by setting
perf_attr.enable_on_exec when starting workloads from the perf
command line
- Don't avoid emitting a PERF_RECORD_MMAP2 in 'perf inject
--buildid-all' when that record comes with a build-id, otherwise we
end up not being able to resolve symbols
- Don't use comma as the CSV output separator the "stat+csv_output"
test, as comma can appear on some tests as a modifier for an event,
use @ instead, ditto for the JSON linter test
- The offcpu test was looking for some bits being set on
task_struct->prev_state without masking other bits not important for
this specific 'perf test', fix it
* tag 'perf-tools-fixes-for-v6.3-1-2023-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Add Adrian Hunter to MAINTAINERS as a reviewer
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools headers x86 cpufeatures: Sync with the kernel sources
tools include UAPI: Sync linux/vhost.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers kvm: Sync uapi/{asm/linux} kvm.h headers with the kernel sources
tools include UAPI: Synchronize linux/fcntl.h with the kernel sources
tools headers: Synchronize {linux,vdso}/bits.h with the kernel sources
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
perf stat: Fix counting when initial delay configured
tools headers svm: Sync svm headers with the kernel sources
perf test: Avoid counting commas in json linter
perf tests stat+csv_output: Switch CSV separator to @
perf inject: Fix --buildid-all not to eat up MMAP2
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf test: Fix offcpu test prev_state check
