When CAN_FLEXCAN=y and M5441x is not set/enabled, there are build
errors in coldfire/device.c:
../arch/m68k/coldfire/device.c:595:26: error: 'MCFFLEXCAN_BASE0' undeclared here (not in a function); did you mean 'MCFDMA_BASE0'?
595 | .start = MCFFLEXCAN_BASE0,
../arch/m68k/coldfire/device.c:596:43: error: 'MCFFLEXCAN_SIZE' undeclared here (not in a function)
596 | .end = MCFFLEXCAN_BASE0 + MCFFLEXCAN_SIZE,
../arch/m68k/coldfire/device.c:600:26: error: 'MCF_IRQ_IFL0' undeclared here (not in a function); did you mean 'MCF_IRQ_I2C0'?
600 | .start = MCF_IRQ_IFL0,
../arch/m68k/coldfire/device.c:605:26: error: 'MCF_IRQ_BOFF0' undeclared here (not in a function); did you mean 'MCF_IRQ_I2C0'?
605 | .start = MCF_IRQ_BOFF0,
../arch/m68k/coldfire/device.c:610:26: error: 'MCF_IRQ_ERR0' undeclared here (not in a function); did you mean 'MCF_IRQ_I2C0'?
610 | .start = MCF_IRQ_ERR0,
Protect the FLEXCAN code blocks by checking if MCFFLEXCAN_SIZE
is defined.
Fixes: 35a9f9363a ("m68k: m5441x: add flexcan support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: uclinux-dev@uclinux.org
Cc: Angelo Dureghello <angelo@kernel-space.org>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
When CONFIG_MCF_EDMA is set (due to COMPILE_TEST, not due to
CONFIG_M5441x), coldfire/device.c has compile errors due to
missing MCFEDMA_* symbols. In the .config file that was provided,
CONFIG_M5206=y, not CONFIG_M5441x, so <asm/m5441xsim.h> is not
included in coldfire/device.c.
Only build the MCF_EDMA code in coldfire/device.c if the MCFEDMA_*
hardware macros are defined.
Fixes these build errors:
../arch/m68k/coldfire/device.c:512:35: error: 'MCFEDMA_BASE' undeclared here (not in a function); did you mean 'MCFDMA_BASE1'?
512 | .start = MCFEDMA_BASE,
../arch/m68k/coldfire/device.c:513:50: error: 'MCFEDMA_SIZE' undeclared here (not in a function)
513 | .end = MCFEDMA_BASE + MCFEDMA_SIZE - 1,
../arch/m68k/coldfire/device.c:517:35: error: 'MCFEDMA_IRQ_INTR0' undeclared here (not in a function)
517 | .start = MCFEDMA_IRQ_INTR0,
../arch/m68k/coldfire/device.c:523:35: error: 'MCFEDMA_IRQ_INTR16' undeclared here (not in a function)
523 | .start = MCFEDMA_IRQ_INTR16,
../arch/m68k/coldfire/device.c:529:35: error: 'MCFEDMA_IRQ_INTR56' undeclared here (not in a function)
529 | .start = MCFEDMA_IRQ_INTR56,
../arch/m68k/coldfire/device.c:535:35: error: 'MCFEDMA_IRQ_ERR' undeclared here (not in a function)
535 | .start = MCFEDMA_IRQ_ERR,
Fixes: d7e9d01ac2 ("m68k: add ColdFire mcf5441x eDMA platform support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: lore.kernel.org/r/202203030252.P752DK46-lkp@intel.com
Cc: Angelo Dureghello <angelo@sysam.it>
Cc: Greg Ungerer <gerg@kernel.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: uclinux-dev@uclinux.org
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Add flexcan support.
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
Made the flexcan resource inclusion conditional based on the enablement
of the flexcan driver. This commit is no longer dependant on the
presence of the updated driver in mainline.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
The mere fact that the kernel has the MMC subsystem enabled (CONFIG_MMC
enabled) does not mean that the underlying hardware platform has the
SDHC hardware present. Within the ColdFire hardware defines that is
signified by MCFSDHC_BASE being defined with an address.
The platform data for the ColdFire parts is including the SDHC hardware
if CONFIG_MMC is enabled, instead of MCFSDHC_BASE. This means that if
you are compiling for a ColdFire target that does not support SDHC but
enable CONFIG_MMC you will fail to compile with errors like this:
arch/m68k/coldfire/device.c:565:12: error: ‘MCFSDHC_BASE’ undeclared here (not in a function)
.start = MCFSDHC_BASE,
^
arch/m68k/coldfire/device.c:566:25: error: ‘MCFSDHC_SIZE’ undeclared here (not in a function)
.end = MCFSDHC_BASE + MCFSDHC_SIZE - 1,
^
arch/m68k/coldfire/device.c:569:12: error: ‘MCF_IRQ_SDHC’ undeclared here (not in a function)
.start = MCF_IRQ_SDHC,
^
Make the SDHC platform support depend on MCFSDHC_BASE, that is only
include it if the specific ColdFire SoC has that hardware module.
Fixes: 991f5c4dd2 ("m68k: mcf5441x: add support for esdhc mmc controller")
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Tested-by: Angelo Dureghello <angelo.dureghello@timesys.com>
As of commit 205e1b7f51 ("dma-mapping: warn when there is no
coherent_dma_mask") the Freescale FEC driver is issuing the following
warning on driver initialization on ColdFire systems:
WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 0x40159e20
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc7-dirty #4
Stack from 41833dd8:
41833dd8 40259c53 40025534 40279e26 00000003 00000000 4004e514 41827000
400255de 40244e42 00000204 40159e20 00000009 00000000 00000000 4024531d
40159e20 40244e42 00000204 00000000 00000000 00000000 00000007 00000000
00000000 40279e26 4028d040 40226576 4003ae88 40279e26 418273f6 41833ef8
7fffffff 418273f2 41867028 4003c9a2 4180ac6c 00000004 41833f8c 4013e71c
40279e1c 40279e26 40226c16 4013ced2 40279e26 40279e58 4028d040 00000000
Call Trace:
[<40025534>] 0x40025534
[<4004e514>] 0x4004e514
[<400255de>] 0x400255de
[<40159e20>] 0x40159e20
[<40159e20>] 0x40159e20
It is not fatal, the driver and the system continue to function normally.
As per the warning the coherent_dma_mask is not set on this device.
There is nothing special about the DMA memory coherency on this hardware
so we can just set the mask to 32bits in the platform data for the FEC
ethernet devices.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
These changes based on work by Steven King <sfking@fdwdc.com> to support
the i2c hardware modules on ColdFire SoC family devices.
This is the per SoC hardware support. Contains a common platform device
setup. Each of the SoC family members tends to have some minor local
setup required to initialize the module. But all ColdFire family members
use the same i2c hardware module.
This i2c hardware module is the same as used in the Freescale iMX ARM
based family of SoC devices. Steven's original patches were based on using
a new and different i2c-coldfire.c driver. But this is not neccessary as
we can use the existing Linux i2c-imx.c driver with no change required to
it. And this patch is now based on using the existing i2c-imx driver.
This patch only contains the ColdFire platform changes.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Tested-by: Angelo Dureghello <angelo@sysam.it>
The FEC (Fast Ethernet Crontroller) module on many ColdFire parts can
be compiled into the kernel, or as a module. Therefore the platform device
support for it is required whenever the driver is enabled - not just when
built into the kernel. Use IS_ENABLED(CONFIG_FEC) instead of a conditional
check on only the driver being built into the kernel.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Move the m68k ColdFire platform support code directory to be with the
existing m68k platforms. Although the ColdFire is not a platform as such,
we have always kept all its support together. No reason to change that
as this time.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
