Add stub implementations of non-protected nVHE stack unwinder, for
building. These are implemented later in this series.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-9-kaleshsingh@google.com
On hyp stack overflow switch to 16-byte aligned secondary stack.
This provides us stack space to better handle overflows; and is
used in a subsequent patch to dump the hypervisor stacktrace.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-8-kaleshsingh@google.com
Add brief description on how to use stacktrace/common.h to implement
a stack unwinder.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-7-kaleshsingh@google.com
Move unwind() to stacktrace/common.h, and as a result
the kernel unwind_next() to asm/stacktrace.h. This allow
reusing unwind() in the implementation of the nVHE HYP
stack unwinder, later in the series.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-6-kaleshsingh@google.com
The unwinder code is made reusable so that it can be used to
unwind various types of stacks. One usecase is unwinding the
nVHE hyp stack from the host (EL1) in non-protected mode. This
means that the unwinder must be able to translate HYP stack
addresses to kernel addresses.
Add a callback (stack_trace_translate_fp_fn) to allow specifying
the translation function.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-5-kaleshsingh@google.com
Move common unwind_next logic to stacktrace/common.h. This allows
reusing the code in the implementation the nVHE hypervisor stack
unwinder, later in this series.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-4-kaleshsingh@google.com
Move common on_accessible_stack checks to stacktrace/common.h. This is
used in the implementation of the nVHE hypervisor unwinder later in
this series.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-3-kaleshsingh@google.com
In order to reuse the arm64 stack unwinding logic for the nVHE
hypervisor stack, move the common code to a shared header
(arch/arm64/include/asm/stacktrace/common.h).
The nVHE hypervisor cannot safely link against kernel code, so we
make use of the shared header to avoid duplicated logic later in
this series.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-2-kaleshsingh@google.com
The archrandom interface was originally designed for x86, which supplies
RDRAND/RDSEED for receiving random words into registers, resulting in
one function to generate an int and another to generate a long. However,
other architectures don't follow this.
On arm64, the SMCCC TRNG interface can return between one and three
longs. On s390, the CPACF TRNG interface can return arbitrary amounts,
with four longs having the same cost as one. On UML, the os_getrandom()
interface can return arbitrary amounts.
So change the api signature to take a "max_longs" parameter designating
the maximum number of longs requested, and then return the number of
longs generated.
Since callers need to check this return value and loop anyway, each arch
implementation does not bother implementing its own loop to try again to
fill the maximum number of longs. Additionally, all existing callers
pass in a constant max_longs parameter. Taken together, these two things
mean that the codegen doesn't really change much for one-word-at-a-time
platforms, while performance is greatly improved on platforms such as
s390.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Even if we are now able to tell the kernel to avoid exposing SVE/SME
from the command line, we still have a couple of places where we
unconditionally access the ZCR_EL1 (resp. SMCR_EL1) registers.
On systems with broken firmwares, this results in a crash even if
arm64.nosve (resp. arm64.nosme) was passed on the command-line.
To avoid this, only update cpuinfo_arm64::reg_{zcr,smcr} once
we have computed the sanitised version for the corresponding
feature registers (ID_AA64PFR0 for SVE, and ID_AA64PFR1 for
SME). This results in some minor refactoring.
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Peter Collingbourne <pcc@google.com>
Tested-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220720105219.1755096-1-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
* for-next/boot: (34 commits)
arm64: fix KASAN_INLINE
arm64: Add an override for ID_AA64SMFR0_EL1.FA64
arm64: Add the arm64.nosve command line option
arm64: Add the arm64.nosme command line option
arm64: Expose a __check_override primitive for oddball features
arm64: Allow the idreg override to deal with variable field width
arm64: Factor out checking of a feature against the override into a macro
arm64: Allow sticky E2H when entering EL1
arm64: Save state of HCR_EL2.E2H before switch to EL1
arm64: Rename the VHE switch to "finalise_el2"
arm64: mm: fix booting with 52-bit address space
arm64: head: remove __PHYS_OFFSET
arm64: lds: use PROVIDE instead of conditional definitions
arm64: setup: drop early FDT pointer helpers
arm64: head: avoid relocating the kernel twice for KASLR
arm64: kaslr: defer initialization to initcall where permitted
arm64: head: record CPU boot mode after enabling the MMU
arm64: head: populate kernel page tables with MMU and caches on
arm64: head: factor out TTBR1 assignment into a macro
arm64: idreg-override: use early FDT mapping in ID map
...
* for-next/cpufeature:
arm64/hwcap: Support FEAT_EBF16
arm64/cpufeature: Store elf_hwcaps as a bitmap rather than unsigned long
arm64/hwcap: Document allocation of upper bits of AT_HWCAP
arm64: trap implementation defined functionality in userspace
* for-next/stacktrace:
arm64: Copy the task argument to unwind_state
arm64: Split unwind_init()
arm64: stacktrace: use non-atomic __set_bit
arm64: kasan: do not instrument stacktrace.c
* for-next/perf:
drivers/perf: arm_spe: Fix consistency of SYS_PMSCR_EL1.CX
perf: RISC-V: Add of_node_put() when breaking out of for_each_of_cpu_node()
docs: perf: Include hns3-pmu.rst in toctree to fix 'htmldocs' WARNING
drivers/perf: hisi: add driver for HNS3 PMU
drivers/perf: hisi: Add description for HNS3 PMU driver
drivers/perf: riscv_pmu_sbi: perf format
perf/arm-cci: Use the bitmap API to allocate bitmaps
drivers/perf: riscv_pmu: Add riscv pmu pm notifier
perf: hisi: Extract hisi_pmu_init
perf/marvell_cn10k: Fix TAD PMU register offset
perf/marvell_cn10k: Remove useless license text when SPDX-License-Identifier is already used
arm64: cpufeature: Allow different PMU versions in ID_DFR0_EL1
perf/arm-cci: fix typo in comment
drivers/perf:Directly use ida_alloc()/free()
drivers/perf: Directly use ida_alloc()/free()
* for-next/mte:
arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags"
mm: kasan: Skip page unpoisoning only if __GFP_SKIP_KASAN_UNPOISON
mm: kasan: Skip unpoisoning of user pages
mm: kasan: Ensure the tags are visible before the tag in page->flags
* for-next/misc:
arm64/mm: use GENMASK_ULL for TTBR_BADDR_MASK_52
arm64: numa: Don't check node against MAX_NUMNODES
arm64: mm: Remove assembly DMA cache maintenance wrappers
arm64/mm: Define defer_reserve_crashkernel()
arm64: fix oops in concurrently setting insn_emulation sysctls
arm64: Do not forget syscall when starting a new thread.
arm64: boot: add zstd support
* for-next/kpti:
arm64: correct the effect of mitigations off on kpti
arm64: entry: simplify trampoline data page
arm64: mm: install KPTI nG mappings with MMU enabled
arm64: kpti-ng: simplify page table traversal logic
* for-next/extable:
arm64: extable: cleanup redundant extable type EX_TYPE_FIXUP
arm64: extable: move _cond_extable to _cond_uaccess_extable
arm64: extable: make uaaccess helper use extable type EX_TYPE_UACCESS_ERR_ZERO
arm64: asm-extable: add asm uacess helpers
arm64: asm-extable: move data fields
arm64: extable: add new extable type EX_TYPE_KACCESS_ERR_ZERO support
A number of Kconfig options have moved around in the defconfig
file over time. Move them to the place that they 'savedefconfig'
puts them at now, to better see which options are now gone
for some reason.
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Daniel Borkmann says:
====================
bpf-next 2022-07-22
We've added 73 non-merge commits during the last 12 day(s) which contain
a total of 88 files changed, 3458 insertions(+), 860 deletions(-).
The main changes are:
1) Implement BPF trampoline for arm64 JIT, from Xu Kuohai.
2) Add ksyscall/kretsyscall section support to libbpf to simplify tracing kernel
syscalls through kprobe mechanism, from Andrii Nakryiko.
3) Allow for livepatch (KLP) and BPF trampolines to attach to the same kernel
function, from Song Liu & Jiri Olsa.
4) Add new kfunc infrastructure for netfilter's CT e.g. to insert and change
entries, from Kumar Kartikeya Dwivedi & Lorenzo Bianconi.
5) Add a ksym BPF iterator to allow for more flexible and efficient interactions
with kernel symbols, from Alan Maguire.
6) Bug fixes in libbpf e.g. for uprobe binary path resolution, from Dan Carpenter.
7) Fix BPF subprog function names in stack traces, from Alexei Starovoitov.
8) libbpf support for writing custom perf event readers, from Jon Doron.
9) Switch to use SPDX tag for BPF helper man page, from Alejandro Colomar.
10) Fix xsk send-only sockets when in busy poll mode, from Maciej Fijalkowski.
11) Reparent BPF maps and their charging on memcg offlining, from Roman Gushchin.
12) Multiple follow-up fixes around BPF lsm cgroup infra, from Stanislav Fomichev.
13) Use bootstrap version of bpftool where possible to speed up builds, from Pu Lehui.
14) Cleanup BPF verifier's check_func_arg() handling, from Joanne Koong.
15) Make non-prealloced BPF map allocations low priority to play better with
memcg limits, from Yafang Shao.
16) Fix BPF test runner to reject zero-length data for skbs, from Zhengchao Shao.
17) Various smaller cleanups and improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (73 commits)
bpf: Simplify bpf_prog_pack_[size|mask]
bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)
bpf, x64: Allow to use caller address from stack
ftrace: Allow IPMODIFY and DIRECT ops on the same function
ftrace: Add modify_ftrace_direct_multi_nolock
bpf/selftests: Fix couldn't retrieve pinned program in xdp veth test
bpf: Fix build error in case of !CONFIG_DEBUG_INFO_BTF
selftests/bpf: Fix test_verifier failed test in unprivileged mode
selftests/bpf: Add negative tests for new nf_conntrack kfuncs
selftests/bpf: Add tests for new nf_conntrack kfuncs
selftests/bpf: Add verifier tests for trusted kfunc args
net: netfilter: Add kfuncs to set and change CT status
net: netfilter: Add kfuncs to set and change CT timeout
net: netfilter: Add kfuncs to allocate and insert CT
net: netfilter: Deduplicate code in bpf_{xdp,skb}_ct_lookup
bpf: Add documentation for kfuncs
bpf: Add support for forcing kfunc args to be trusted
bpf: Switch to new kfunc flags infrastructure
tools/resolve_btfids: Add support for 8-byte BTF sets
bpf: Introduce 8-byte BTF set
...
====================
Link: https://lore.kernel.org/r/20220722221218.29943-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The isa_dma_bridge_buggy symbol is only used for x86_32, and only x86_32
platforms or quirks ever set it.
Add a new linux/isa-dma.h header that #defines isa_dma_bridge_buggy to 0
except on x86_32, where we keep it as a variable, and remove all the arch-
specific definitions.
[bhelgaas: commit log]
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/r/20220722214944.831438-3-shorne@gmail.com
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
pci_get_legacy_ide_irq() is only used on platforms that support PNP, so
many architectures define it but never use it. Replace uses of it with
ATA_PRIMARY_IRQ() and ATA_SECONDARY_IRQ(), which provide the same
functionality.
Since pci_get_legacy_ide_irq() is no longer used, remove all the
architecture-specific definitions of it as well as asm-generic/pci.h, which
only provides pci_get_legacy_ide_irq()
[bhelgaas: commit log]
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220722214944.831438-2-shorne@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CONFIG_DEBUG_INFO is now implicitly selected if one picks one of the
explicit options that could be DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT,
DEBUG_INFO_DWARF4, DEBUG_INFO_DWARF5.
This was actually not what I had in mind when I suggested making
it a 'choice' statement, but it's too late to change again now,
and the Kconfig logic is more sensible in the new form.
Change any defconfig file that had CONFIG_DEBUG_INFO enabled
but did not pick DWARF4 or DWARF5 explicitly to now pick the toolchain
default.
Fixes: f9b3cd2457 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dummy_tramp() uses "lr" to refer to the x30 register, but some assembler
does not recognize "lr" and reports a build failure:
/tmp/cc52xO0c.s: Assembler messages:
/tmp/cc52xO0c.s:8: Error: operand 1 should be an integer register -- `mov lr,x9'
/tmp/cc52xO0c.s:7: Error: undefined symbol lr used as an immediate value
make[2]: *** [scripts/Makefile.build:250: arch/arm64/net/bpf_jit_comp.o] Error 1
make[1]: *** [scripts/Makefile.build:525: arch/arm64/net] Error 2
So replace "lr" with "x30" to fix it.
Fixes: b2ad54e153 ("bpf, arm64: Implement bpf_arch_text_poke() for arm64")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/bpf/20220721121319.2999259-1-xukuohai@huaweicloud.com
This enables a few of the core drivers needed to boot the 8cx Gen 3
platform and demotes the Qualcomm USB PHY drivers to modules, as they
don't need to be builtin.
-----BEGIN PGP SIGNATURE-----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=KJ5v
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=CCqT
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig more updates for v5.20
This enables a few of the core drivers needed to boot the 8cx Gen 3
platform and demotes the Qualcomm USB PHY drivers to modules, as they
don't need to be builtin.
* tag 'qcom-arm64-defconfig-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Demote Qualcomm USB PHYs to modules
arm64: defconfig: Enable Qualcomm SC8280XP providers
Link: https://lore.kernel.org/r/20220720230140.2113129-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for Xiaomi Mi Mix2s (polaris) handsets.
Currently working features:
- UFS
- Touchscreen
- USB 2
- Bluetooth
- Wi-Fi
- GPU
- Venus
- Display (need jdi-fhd-nt35596s panel driver, which I have sent a
patch but it haven't been into upstream yet)
Signed-off-by: Molly Sophia <mollysophia379@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220712145139.9473-2-mollysophia379@gmail.com
Since commit:
a004393f45 ("arm64: idreg-override: use early FDT mapping in ID map")
Kernels built with KASAN_INLINE=y die early in boot before producing any
console output. This is because the accesses made to the FDT (e.g. in
generic string processing functions) are instrumented with KASAN, and
with KASAN_INLINE=y any access to an address in TTBR0 results in a bogus
shadow VA, resulting in a data abort.
This patch fixes this by reverting commits:
7559d9f975 ("arm64: setup: drop early FDT pointer helpers")
bd0c3fa21878b6d0 ("arm64: idreg-override: use early FDT mapping in ID map")
... and using the TTBR1 fixmap mapping of the FDT.
Note that due to a later commit:
b65e411d6c ("arm64: Save state of HCR_EL2.E2H before switch to EL1")
... which altered the prototype of init_feature_override() (and
invocation from head.S), commit bd0c3fa21878b6d0 does not revert
cleanly, and I've fixed that up manually.
Fixes: a004393f45 ("arm64: idreg-override: use early FDT mapping in ID map")
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220713140949.45440-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The v9.2 feature FEAT_EBF16 provides support for an extended BFloat16 mode.
Allow userspace to discover system support for this feature by adding a
hwcap for it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220707103632.12745-4-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
When we added support for AT_HWCAP2 we took advantage of the fact that we
have limited hwcaps to the low 32 bits and stored it along with AT_HWCAP
in a single unsigned integer. Thanks to the ever expanding capabilities of
the architecture we have now allocated all 64 of the bits in an unsigned
long so in preparation for adding more hwcaps convert elf_hwcap to be a
bitmap instead, with 64 bits allocated to each AT_HWCAP.
There should be no functional change from this patch.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220707103632.12745-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The top two bits of AT_HWCAP are reserved for use by glibc and the rest of
the top 32 bits are being kept unallocated for potential use by glibc.
Document this in the header.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Link: https://lore.kernel.org/r/20220707103632.12745-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
THP_SWAP has been proven to improve the swap throughput significantly
on x86_64 according to commit bd4c82c22c ("mm, THP, swap: delay
splitting THP after swapped out").
As long as arm64 uses 4K page size, it is quite similar with x86_64
by having 2MB PMD THP. THP_SWAP is architecture-independent, thus,
enabling it on arm64 will benefit arm64 as well.
A corner case is that MTE has an assumption that only base pages
can be swapped. We won't enable THP_SWAP for ARM64 hardware with
MTE support until MTE is reworked to coexist with THP_SWAP.
A micro-benchmark is written to measure thp swapout throughput as
below,
unsigned long long tv_to_ms(struct timeval tv)
{
return tv.tv_sec * 1000 + tv.tv_usec / 1000;
}
main()
{
struct timeval tv_b, tv_e;;
#define SIZE 400*1024*1024
volatile void *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
if (!p) {
perror("fail to get memory");
exit(-1);
}
madvise(p, SIZE, MADV_HUGEPAGE);
memset(p, 0x11, SIZE); /* write to get mem */
gettimeofday(&tv_b, NULL);
madvise(p, SIZE, MADV_PAGEOUT);
gettimeofday(&tv_e, NULL);
printf("swp out bandwidth: %ld bytes/ms\n",
SIZE/(tv_to_ms(tv_e) - tv_to_ms(tv_b)));
}
Testing is done on rk3568 64bit Quad Core Cortex-A55 platform -
ROCK 3A.
thp swp throughput w/o patch: 2734bytes/ms (mean of 10 tests)
thp swp throughput w/ patch: 3331bytes/ms (mean of 10 tests)
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Link: https://lore.kernel.org/r/20220720093737.133375-1-21cnbao@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
make dtbs_check currently reports the following errors
with qrb5165-rb5 led nodes:
arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb:
leds: 'bt', 'user4', 'wlan' do not match any of the regexes:
'(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Fix the same.
Also while at it, fix a blank line issue in the led
node.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220719205058.1004942-3-bhupesh.sharma@linaro.org
The comment says this should be GENMASK_ULL(47, 12), so do that!
GENMASK_ULL() is available in assembly since:
95b980d62d ("linux/bits.h: make BIT(), GENMASK(), and friends available in assembly")
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/all/20171221164851.edxq536yobjuagwe@armageddon.cambridge.arm.com/
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Kristina Martsenko <kristina.martsenko@arm.com>
Reviewed-by: Kristina Martsenko <kristina.martsenko@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220708140056.10123-1-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Cortex-A57 and Cortex-A72 have an erratum where an interrupt that
occurs between a pair of AES instructions in aarch32 mode may corrupt
the ELR. The task will subsequently produce the wrong AES result.
The AES instructions are part of the cryptographic extensions, which are
optional. User-space software will detect the support for these
instructions from the hwcaps. If the platform doesn't support these
instructions a software implementation should be used.
Remove the hwcap bits on affected parts to indicate user-space should
not use the AES instructions.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220714161523.279570-3-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
When the NUMA nodes are sorted by checking ACPI SRAT (GICC AFFINITY)
sub-table, it's impossible for acpi_map_pxm_to_node() to return
any value, which is greater than or equal to MAX_NUMNODES. Lets drop
the unnecessary check in acpi_numa_gicc_affinity_init().
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20220718064232.3464373-1-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
This adds initial device tree support for the Nuvoton NPCM845 Board
Management controller (BMC) SoC family.
The NPCM845 based quad-core Cortex-A35 ARMv8 architecture and have
various peripheral IPs.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds support for the Nuvoton NPCM8XX Board Management
controller (BMC) SoC family.
The NPCM8XX based quad-core Cortex-A35 ARMv8 architecture.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit makes sure the drivers for the 98DX2530 pin controller is
enabled.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The 98DX2530 SoC is the Control and Management CPU integrated into
the Marvell 98DX25xx and 98DX35xx series of switch chip (internally
referred to as AlleyCat5 and AlleyCat5X).
These files have been taken from the Marvell SDK and lightly cleaned
up with the License and copyright retained.
gregory.clement: use specific cpu type: cortex-a55 instead of armv8 in
cpu nodes, armv8 being reserved for the arm virtual models that are
not meant to implement a particular CPU type.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The kernel log contains complaints about i2c11 and i2c14 lacking
clock-frequency, specify a reasonable value to suppress this warning.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220717034403.2135027-4-bjorn.andersson@linaro.org
Both vdda-1p2-supply and vdda-0p9-supply regulators are controlled
by dp combo phy. Therefore remove them from dp controller.
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657556603-15024-1-git-send-email-quic_khsieh@quicinc.com
The Qualcomm USB PHYs are not critical for reaching the ramdisk to load
modules, so they can be demoted to be built as such instead of builtin.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220712031821.4134712-1-bjorn.andersson@linaro.org
qcom-cpufreq-hw finds turbo-mode in the LUT hardware tables
and slaps the flag on the last element, so there's no reason
to add it in the dts, so remove it.
Signed-off-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220718230109.8193-1-steev@kali.org
When booting a Thinkpad x13s, we see the message
[ 0.997647] cpu cpu0: failed to update OPP for freq=300000
So, lets add in 300MHz to make it happy
Signed-off-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220718225714.8074-1-steev@kali.org
When RDRAND was introduced, there was much discussion on whether it
should be trusted and how the kernel should handle that. Initially, two
mechanisms cropped up, CONFIG_ARCH_RANDOM, a compile time switch, and
"nordrand", a boot-time switch.
Later the thinking evolved. With a properly designed RNG, using RDRAND
values alone won't harm anything, even if the outputs are malicious.
Rather, the issue is whether those values are being *trusted* to be good
or not. And so a new set of options were introduced as the real
ones that people use -- CONFIG_RANDOM_TRUST_CPU and "random.trust_cpu".
With these options, RDRAND is used, but it's not always credited. So in
the worst case, it does nothing, and in the best case, maybe it helps.
Along the way, CONFIG_ARCH_RANDOM's meaning got sort of pulled into the
center and became something certain platforms force-select.
The old options don't really help with much, and it's a bit odd to have
special handling for these instructions when the kernel can deal fine
with the existence or untrusted existence or broken existence or
non-existence of that CPU capability.
Simplify the situation by removing CONFIG_ARCH_RANDOM and using the
ordinary asm-generic fallback pattern instead, keeping the two options
that are actually used. For now it leaves "nordrand" for now, as the
removal of that will take a different route.
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Now all the platforms enable ARCH_HAS_GET_PAGE_PROT. They define and
export own vm_get_page_prot() whether custom or standard
DECLARE_VM_GET_PAGE_PROT. Hence there is no need for default generic
fallback for vm_get_page_prot(). Just drop this fallback and also
ARCH_HAS_GET_PAGE_PROT mechanism.
Link: https://lkml.kernel.org/r/20220711070600.2378316-27-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The HugeTLB address ranges are linearly scanned during fork, unmap and
remap operations, and the linear scan can skip to the end of range mapped
by the page table page if hitting a non-present entry, which can help to
speed linear scanning of the HugeTLB address ranges.
So hugetlb_mask_last_page() is introduced to help to update the address in
the loop of HugeTLB linear scanning with getting the last huge page mapped
by the associated page table page[1], when a non-present entry is
encountered.
Considering ARM64 specific cont-pte/pmd size HugeTLB, this patch
implemented an ARM64 specific hugetlb_mask_last_page() to help this case.
[1] https://lore.kernel.org/linux-mm/20220527225849.284839-1-mike.kravetz@oracle.com/
[baolin.wang@linux.alibaba.com: fix build]
Link: https://lkml.kernel.org/r/a14e7b39-6a8a-4609-b4a1-84ac574f5c96@linux.alibaba.com
Link: https://lkml.kernel.org/r/20220621235620.291305-3-mike.kravetz@oracle.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* kvm-arm64/sysreg-cleanup-5.20:
: .
: Long overdue cleanup of the sysreg userspace access,
: with extra scrubbing on the vgic side of things.
: From the cover letter:
:
: "Schspa Shi recently reported[1] that some of the vgic code interacting
: with userspace was reading uninitialised stack memory, and although
: that read wasn't used any further, it prompted me to revisit this part
: of the code.
:
: Needless to say, this area of the kernel is pretty crufty, and shows a
: bunch of issues in other parts of the KVM/arm64 infrastructure. This
: series tries to remedy a bunch of them:
:
: - Sanitise the way we deal with sysregs from userspace: at the moment,
: each and every .set_user/.get_user callback has to implement its own
: userspace accesses (directly or indirectly). It'd be much better if
: that was centralised so that we can reason about it.
:
: - Enforce that all AArch64 sysregs are 64bit. Always. This was sort of
: implied by the code, but it took some effort to convince myself that
: this was actually the case.
:
: - Move the vgic-v3 sysreg userspace accessors to the userspace
: callbacks instead of hijacking the vcpu trap callback. This allows
: us to reuse the sysreg infrastructure.
:
: - Consolidate userspace accesses for both GICv2, GICv3 and common code
: as much as possible.
:
: - Cleanup a bunch of not-very-useful helpers, tidy up some of the code
: as we touch it.
:
: [1] https://lore.kernel.org/r/m2h740zz1i.fsf@gmail.com"
: .
KVM: arm64: Get rid or outdated comments
KVM: arm64: Descope kvm_arm_sys_reg_{get,set}_reg()
KVM: arm64: Get rid of find_reg_by_id()
KVM: arm64: vgic: Tidy-up calls to vgic_{get,set}_common_attr()
KVM: arm64: vgic: Consolidate userspace access for base address setting
KVM: arm64: vgic-v2: Add helper for legacy dist/cpuif base address setting
KVM: arm64: vgic: Use {get,put}_user() instead of copy_{from.to}_user
KVM: arm64: vgic-v2: Consolidate userspace access for MMIO registers
KVM: arm64: vgic-v3: Consolidate userspace access for MMIO registers
KVM: arm64: vgic-v3: Use u32 to manage the line level from userspace
KVM: arm64: vgic-v3: Convert userspace accessors over to FIELD_GET/FIELD_PREP
KVM: arm64: vgic-v3: Make the userspace accessors use sysreg API
KVM: arm64: vgic-v3: Push user access into vgic_v3_cpu_sysregs_uaccess()
KVM: arm64: vgic-v3: Simplify vgic_v3_has_cpu_sysregs_attr()
KVM: arm64: Get rid of reg_from/to_user()
KVM: arm64: Consolidate sysreg userspace accesses
KVM: arm64: Rely on index_to_param() for size checks on userspace access
KVM: arm64: Introduce generic get_user/set_user helpers for system registers
KVM: arm64: Reorder handling of invariant sysregs from userspace
KVM: arm64: Add get_reg_by_id() as a sys_reg_desc retrieving helper
Signed-off-by: Marc Zyngier <maz@kernel.org>
Once apon a time, the 32bit KVM/arm port was the reference, while
the arm64 version was the new kid on the block, without a clear
future... This was a long time ago.
"The times, they are a-changing."
Signed-off-by: Marc Zyngier <maz@kernel.org>
Having kvm_arm_sys_reg_get_reg and co in kvm_host.h gives the
impression that these functions are free to be called from
anywhere.
Not quite. They really are tied to out internal sysreg handling,
and they would be better off in the sys_regs.h header, which is
private. kvm_host.h could also get a bit of a diet, so let's
just do that.
Signed-off-by: Marc Zyngier <maz@kernel.org>
The userspace accessors have an early call to vgic_{get,set}_common_attr()
that makes the code hard to follow. Move it to the default: clause of
the decoding switch statement, which results in a nice cleanup.
This requires us to move the handling of the pending table into the
common handling, even if it is strictly a GICv3 feature (it has the
benefit of keeping the whole control group handling in the same
function).
Also cleanup vgic_v3_{get,set}_attr() while we're at it, deduplicating
the calls to vgic_v3_attr_regs_access().
Suggested-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Align kvm_vgic_addr() with the rest of the code by moving the
userspace accesses into it. kvm_vgic_addr() is also made static.
Signed-off-by: Marc Zyngier <maz@kernel.org>
We carry a legacy interface to set the base addresses for GICv2.
As this is currently plumbed into the same handling code as
the modern interface, it limits the evolution we can make there.
Add a helper dedicated to this handling, with a view of maybe
removing this in the future.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tidy-up vgic_get_common_attr() and vgic_set_common_attr() to use
{get,put}_user() instead of the more complex (and less type-safe)
copy_{from,to}_user().
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Align the GICv2 MMIO accesses from userspace with the way the GICv3
code is now structured.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
For userspace accesses to GICv3 MMIO registers (and related data),
vgic_v3_{get,set}_attr are littered with {get,put}_user() calls,
making it hard to audit and reason about.
Consolidate all userspace accesses in vgic_v3_attr_regs_access(),
making the code far simpler to audit.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Despite the userspace ABI clearly defining the bits dealt with by
KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO as a __u32, the kernel uses a u64.
Use a u32 to match the userspace ABI, which will subsequently lead
to some simplifications.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The GICv3 userspace accessors are all about dealing with conversion
between fields from architectural registers and internal representations.
However, and owing to the age of this code, the accessors use
a combination of shift/mask that is hard to read. It is nonetheless
easy to make it better by using the FIELD_{GET,PREP} macros that solely
rely on a mask.
This results in somewhat nicer looking code, and is probably easier
to maintain.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The vgic-v3 sysreg accessors have been ignored as the rest of the
sysreg internal API was evolving, and are stuck with the .access
method (which is normally reserved to the guest's own access)
for the userspace accesses (which should use the .set/.get_user()
methods).
Catch up with the program and repaint all the accessors so that
they fit into the normal userspace model, and plug the result into
the helpers that have been introduced earlier.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
In order to start making the vgic sysreg access from userspace
similar to all the other sysregs, push the userspace memory
access one level down into vgic_v3_cpu_sysregs_uaccess().
The next step will be to rely on the sysreg infrastructure
to perform this task.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Finding out whether a sysreg exists has little to do with that
register being accessed, so drop the is_write parameter.
Also, the reg pointer is completely unused, and we're better off
just passing the attr pointer to the function.
This result in a small cleanup of the calling site, with a new
helper converting the vGIC view of a sysreg into the canonical
one (this is purely cosmetic, as the encoding is the same).
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
These helpers are only used by the invariant stuff now, and while
they pretend to support non-64bit registers, this only serves as
a way to scare the casual reviewer...
Replace these helpers with our good friends get/put_user(), and
don't look back.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Until now, the .set_user and .get_user callbacks have to implement
(directly or not) the userspace memory accesses. Although this gives
us maximem flexibility, this is also a maintenance burden, making it
hard to audit, and I'd feel much better if it was all located in
a single place.
So let's do just that, simplifying most of the function signatures
in the process (the callbacks are now only concerned with the
data itself, and not with userspace).
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
index_to_param() already checks that we use 64bit accesses for all
registers accessed from userspace.
However, we have extra checks in other places (such as index_to_params),
which is pretty confusing. Get rid off these redundant checks.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The userspace access to the system registers is done using helpers
that hardcode the table that is looked up. extract some generic
helpers from this, moving the handling of hidden sysregs into
the core code.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
In order to allow some further refactor of the sysreg helpers,
move the handling of invariant sysreg to occur before we handle
all the other ones.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
find_reg_by_id() requires a sys_reg_param as input, which most
users provide as a on-stack variable, but don't make any use of
the result.
Provide a helper that doesn't have this requirement and simplify
the callers (all but one).
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
With CONFIG_RANDOMIZE_BASE=y vmlinux addresses will resolve incorrectly
from kallsyms. Fix this by adding the KASLR offset before printing the
symbols.
Fixes: 6ccf9cb557 ("KVM: arm64: Symbolize the nVHE HYP addresses")
Reported-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220715235824.2549012-1-kaleshsingh@google.com
Three SoCs did not follow the interrupt order specified by the USB
controller binding.
While keeping the non-SuperSpeed interrupts together seems natural,
reorder the interrupts to match the binding.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bjorn: Omitted sdx65 part from this patch]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220715070248.19078-5-johan+linaro@kernel.org
Only one of the USB controllers supports SuperSpeed and have an SS PHY
wakeup interrupt.
Reorder the interrupts so that they match the updated binding which
specifically has the optional interrupt last.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220715070248.19078-4-johan+linaro@kernel.org
The two single-port SC8280XP USB controllers do not have an hs_phy_irq
interrupt. Instead they have a pwr_event interrupt which is distinct
from the former and not yet supported by the driver.
Fix the USB node interrupt names so that they match the devicetree
binding.
Also fix the pwr_event interrupt of the second controller which should
be 811 as noticed by Andrew Halaney.
Fixes: 152d1faf1e ("arm64: dts: qcom: add SC8280XP platform")
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220715070248.19078-3-johan+linaro@kernel.org
Fix the USB controller clock order and naming so that they match the
devicetree binding.
Note that the driver currently simply enables all clocks in the order
that they are specified in the devicetree. Reordering the clocks as per
the binding means that the only explicit ordering constraint found in
the vendor driver, that cfg_noc should be enabled before the core_clk,
is now honoured.
Fixes: 152d1faf1e ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220715070248.19078-2-johan+linaro@kernel.org
for 5.20, second part, please pull the following:
- Rafal adds basic support for the BCM4912-based router Asus GT-AX6000,
he also has ARCH_BCM4908 select ARCH_BCMBCA such that in the next cycle
we can remove ARCH_BCM4908 and continue to have make oldconfig work.
Finally he spells out what BCA means to make it clearer
-----BEGIN PGP SIGNATURE-----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=fDSG
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7JrY
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.20/devicetree-arm64-part2' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.20, second part, please pull the following:
- Rafal adds basic support for the BCM4912-based router Asus GT-AX6000,
he also has ARCH_BCM4908 select ARCH_BCMBCA such that in the next cycle
we can remove ARCH_BCM4908 and continue to have make oldconfig work.
Finally he spells out what BCA means to make it clearer
* tag 'arm-soc/for-5.20/devicetree-arm64-part2' of https://github.com/Broadcom/stblinux:
arm64: bcmbca: Include full family name in Kconfig
arm64: make ARCH_BCM4908 select ARCH_BCMBCA
arm64: dts: Add base DTS file for bcmbca device Asus GT-AX6000
Link: https://lore.kernel.org/r/20220715221642.297536-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fix the usb_1 SS PHY interrupt, which was mistakingly replaced with one
of the usb_2 PHY interrupts.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220715165344.28822-1-johan+linaro@kernel.org
PPI interrupt should be 7 for the PMU.
Cc: Johan Hovold <johan+linaro@kernel.org>
Fixes: 152d1faf1e ("arm64: dts: qcom: add SC8280XP platform")
Reported-by: Steve Capper <Steve.Capper@arm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220713143429.22624-1-manivannan.sadhasivam@linaro.org
There has been wrong values introduced for context interrupt for
smu node apps_smmu. Fix those ones with due correction.
Fixes: 152d1faf1e ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220711174133.28882-1-quic_ppareek@quicinc.com
Currently the DT for QCS404 SoC has setup for 2 USB2 PHYs with one each
assigned to USB3 controller and USB2 controller. This assignment is
incorrect which only works by luck: as when each USB HCI comes up it
configures the *other* controllers PHY which is enough to make them
happy. If, for any reason, we were to disable one of the controllers then
both would stop working.
This was a difficult inconsistency to be caught which was found while
trying to enable USB support in u-boot. So with all the required drivers
ported to u-boot, I couldn't get the same USB storage device enumerated
in u-boot which was being enumerated fine by the kernel.
The root cause of the problem came out to be that I wasn't enabling USB2
PHY: "usb2_phy_prim" in u-boot. Then I realised that via simply disabling
the same USB2 PHY currently assigned to USB2 host controller in the
kernel disabled enumeration for USB3 host controller as well.
So fix this inconsistency by correctly assigning USB2 PHYs.
Fixes: 9375e7d719 ("arm64: dts: qcom: qcs404: Add USB devices and PHYs")
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220711083038.1518529-1-sumit.garg@linaro.org
The eDP node includes two clocks which are used by the eDP PHY rather
than eDP controller itself. Drop these clocks to remove extra difference
between eDP and DP controllers.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220710084133.30976-7-dmitry.baryshkov@linaro.org
Drop #address/#size-cells from eDP device node. For eDP the panels are
not described directly under the controller node. They are either
present under aux-bus child node, or they are declared separately (e.g.
in a /soc node).
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220710084133.30976-6-dmitry.baryshkov@linaro.org
Drop #clock-cells from DP device node. It is a leftover from the times
before splitting the deviice into controller and PHY devices. Now the
clocks are provided by the PHY, while the controller doesn't provide any
clocks.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220710084133.30976-5-dmitry.baryshkov@linaro.org
