Ensure the device has been setup correctly before registering the v4l2
async device, thus allowing userspace to access.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Fixes: 4c5211a100 ("[media] tc358743: register v4l2 asynchronous subdevice")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add support for STM32MP25 VENC video hardware encoder.
Support of JPEG encoding.
VENC has its own reset/clock/irq.
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add support for STM32MP25 VDEC video hardware decoder.
Support of H264/VP8 decoding.
No post-processor support.
VDEC has its own reset/clock/irq.
Successfully tested up to full HD.
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In some chips, MDP3 has the ability to utilize two pipelines to
parallelly process a single frame.
To enable this feature, multiple CMDQ clients and packets need to
be configured at the same time.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Extend the component settings used in MT8195 MDP3.
Additionally, it is crucial to read all component settings in
a specific manner to ensure that shared memory data structure lengths
are aligned across different platforms.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The configuration of the MT8195 components in the shared memory
is defined in the header file "mdp_sm_mt8195.h".
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add MT8195 MDP3 basic configuration in file "mdp_cfg_data.c"
and corresponding driver data.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Certain chips can combine several components to form complex virtual
units with advanced functions.
These components require simultaneous configuration of their MODs and
clocks.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Support for multiple RDMA/WROT waits for GCE events.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The amount of MDP3 driver probes is determined by the registered
clocks of MMSYS.
Since MT8195 MDP3 utilizes VPPSYS0 and VPPSYS1, it's necessary to
prevent multiple driver registrations.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Some components act as bridges only and do not require full configuration.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add configuration of more components in MT8195 MDP3.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Increasing the number of sets built by MMSYS and MUTEX in MT8195
will enable the creation of more pipelines in MDP3.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
After setting up the second set of MMSYS (VPPSYS1), it is necessary
to have a corresponding second set of MUTEX (MUTEX2) to assist in
handling SOF/EOF.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The MT8195 chipset features two MMSYS subsets: VPPSYS0 and VPPSYS1.
These subsets coordinate and control the clock, power, and
register settings required for the components of MDP3.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmW2+NgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGNMoH/RbwRC7SpkT55lsD
lIpaUrIYLuXkPKJa/3eD75cOtOv4Yi+aHGXfdTbo+JwWBKg4zY8X2pr7IZrvfpp5
TZD+PADQtFAReWlQtVsaNM7om8k+2ltm+nkso1G+FpHljqqHgl3gc95UrVlmM70r
iEScR0KbHkJ2Yv5H8C6ardcA87JYMaex6USK9GWSoylBN3R+Z49YEC9q07IQatAA
Do8i6jDtw3O9OF2PpnhIPXxQZkwsn15pY1HwZxUEDMPXteMZa6NogvFsj6kSIudo
YTF3FK+oX5CXNATL49OY4ibJ701mPCKqsuY3z6SuoYtvhI6wR96sIGFjEWV9tHvU
VhPBvCI=
=BKso
-----END PGP SIGNATURE-----
Merge tag 'v6.8-rc2'
Linux 6.8-rc2
The vb2 fixes from v6.8-rc2 are needed for the work on the new
vb2 delete buffers feature.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Several functions implementing VIDIOC_REQBUFS and _CREATE_BUFS all use
almost the same code to fill in the flags and capability fields. Refactor
this into a new vb2_set_flags_and_caps() function that replaces the old
fill_buf_caps() and validate_memory_flags() functions.
This also fixes a bug where vb2_ioctl_create_bufs() would not set the
V4L2_BUF_CAP_SUPPORTS_MAX_NUM_BUFFERS cap and also not fill in the
max_num_buffers field.
Fixes: d055a76c00 ("media: core: Report the maximum possible number of buffers for the queue")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Fixes: d055a76c00 ("media: core: Report the maximum possible number of buffers for the queue")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Change compatible string to match dt bindings for TI devices. K3 family
prefix should not be included as it deviates from naming convention.
Fixes: 9707a6254a ("media: chips-media: wave5: Add the v4l2 layer")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdUYOq=q1j=d+Eac28hthOUAaNUkuvxmRu-mUN1pLKq69g@mail.gmail.com/
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Drop obsolete @wait_key_frame and @mv_joint struct member descriptions.
This fixes two warnings:
drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp8_req_if.c:57: warning: Excess struct member 'wait_key_frame' description in 'vdec_vp8_slice_info'
drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c:166: warning: Excess struct member 'mv_joint' description in 'vdec_vp9_slice_counts_map'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Drop a debug print in media_release(), which is a release callback for a
file handle. Printing a debug message here is simply not necessary.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add relevant debug prints for v4l2_fwnode_create_links_for_pad(). This
should help debugging when things go wrong.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use v4l2_create_fwnode_links_to_pad() to create links from async
sub-devices to the CSI-2 receiver subdevs.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add enum_mbus_code ioctl so that user space can know what
formats are supported to csi2rx.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Tested-by: Jai Luthra <j-luthra@ti.com> # [Test on sk-am62a]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use proper indentation for Kconfig fragments - help part.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There is a spelling mistake in a dev_err error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add support for RGB565, RGB888 and BGR888 media bus formats.
The pixel formats for these have a different byte-order than the MIPI
bus formats, given the SHIM IP [1] unpacks them into memory as follows:
MIPI RGB888 unpacks to:
BYTE3 BYTE2 BYTE1 BYTE0
00000000 RRRRRRRR GGGGGGGG BBBBBBBB
MIPI RGB565 unpacks to:
BIT 15-11 BIT 10-5 BIT 4-0
RRRRR GGGGGG BBBBB
[1]: AM62x TRM: 12.6.1.4.5 "CSI_RX_IF Data Memory Organization Details"
Link: https://www.ti.com/lit/pdf/spruiv7
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add support for RGB565, RGB888 and BGR888 media bus formats.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add Grey format to properly select RAW8 data type.
Tested with a ST VG5661 sensor.
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Acked-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add support for MEDIA_BUS_FMT_Y8_1X8 format.
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Acked-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Since commit 1029939b37 ("media: v4l: async: Simplify async sub-device fwnode matching"),
async connections are matched using the async sub-device fwnode, not that
of the endpoint. Fix this by using the fwnode of the connection match to
find the pad.
Fixes: 1029939b37 ("media: v4l: async: Simplify async sub-device fwnode matching")
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Change the interface of power management functions in s5p_mfc_pm.c to
accept the pointer to S5P MFC device structure. instead of relying on
file-scope static variable. This makes code easier to read and modify
in case more devices are added.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Pointer "struct s5p_mfc_dev" is stored in s5p_mfc_pm.c once and never
used again.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Drop useless debugging of clock enabl/disable counts, because core
handles this much better.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Constify the local variables pointing to "struct s5p_mfc_enc_params" and
other encoding params to annotate the function is not modifying pointed
data.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In few places functions do not modify pointed "struct
s5p_mfc_cmd_args", thus the pointer can point to const data for
additional safety and self-documenting intention of the function.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Static "struct" structures are not modified by the driver, so
they can be made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Static "s5p_mfc_fmt" structures are not modified by the driver, so
they can be made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Static "s5p_mfc_hw_ops" structures are not modified by the driver, so
they can be made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Static "s5p_mfc_hw_cmds" structures are not modified by the driver, so
they can be made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Static "s5p_mfc_variant" structures are not modified by the driver, so
they can be made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Static "s5p_mfc_buf_size*" structures are not modified by the driver, so
they can be made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Constify stored pointers to firmware names for code safety. These are
not modified by the driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
get_dec_def_fmt() and get_enc_def_fmt() do not have definitions, so
their declarations are pointless.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
File-scope static variable "s5p_mfc_ops" is not read after assignment,
thus it can be dropped entirely.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
File-scope static variable "s5p_mfc_cmds" is not read after assignment,
thus it can be dropped entirely.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Constify the local variables pointing to "struct fimc_frame" to annotate
the function is not modifying pointed data.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Constify the local variables pointing to "struct fimc_vid_cap" to
annotate the function is not modifying pointed data.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Constify the local variables pointing to "struct fimc_dma_offset" to
annotate the function is not modifying pointed data.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
