The Chuwi Hi8 tablet is using an analog mic on IN1 and has its
jack-detect connected to JD2_IN4N, instead of using the default
IN3 for its internal mic and JD1_IN4P for jack-detect.
It also only has 1 speaker.
Add a quirk applying the correct settings for this configuration.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210325221054.22714-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add jack detect support by creating a jack and calling
snd_soc_component_set_jack to register the created jack
with the codec.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-14-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should use the topology configured mclk if it existed, which can make
sure we are aligned with the FW side about the mclk usage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210319124950.3853994-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds jsl_rt5682_rt1015p which supports the RT5682 headset
codec and ALC1015Q-VB speaker amplifier combination on JasperLake
platform.
This driver also supports ALC1015Q-CG if running in auto-mode.
Following table shows the audio interface support of the two
amplifiers.
| ALC1015Q-CG | ALC1015Q-VB
=====================================
I2C | Yes | No
Auto-mode | 48K, 64fs | 16k, 32fs
| 48k, 32fs
| 48k, 64fs
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210317110824.20814-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/intel/skylake/skl-topology.c:3613:13: warning: stack frame
size of 1304 bytes in function 'skl_tplg_complete'
[-Wframe-larger-than=]
struct snd_ctl_elem_value is 1224 bytes in my configuration.
Heap allocate it, then free it within the current frame.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Link: https://lore.kernel.org/r/20210315013908.217219-1-nick.desaulniers@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Depending on which AIF is used the UCM profile needs to setup
a different path through the rt5640's "Digital Mixer Path" graph.
ATM the UCM profiles solve this by just enabling paths to the outputs /
from the input from both AIF1 and AIF2 and then relying on the DAPM
framework to power-down the parts of the graph connected to the
unused AIF.
But in order to be able to use hardware-volumecontrol and to use
the hardware mute controls, which are necessary for mute LED control,
the UCM profiles need to know which AIF is actually being used.
Add a new "aif:1" or "aif:2" part to the component string to provide
info about the used AIF to userspace / to the UCM profiles.
Note the size of byt_rt5640_components is not increased because the
size of 32 chars already is big enough.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307150503.34906-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Asus T100TAF uses the same jack-detect settings as the T100TA,
this has been confirmed on actual hardware.
Add these settings to the T100TAF quirks to enable jack-detect support
on the T100TAF.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312114850.13832-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make W=1 warning:
sound/soc/intel/boards/bytcr_wm5102.c:216:40: error:
‘byt_wm5102_dai_params’ defined but not used
[-Werror=unused-const-variable=]
216 | static const struct snd_soc_pcm_stream byt_wm5102_dai_params = {
| ^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302205926.49063-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove two machine descriptors which were added for development on
Intel RVPs but are no longer used or productized. This will not have
any impact on end-users. The corresponding cleanup was applied in the
SOF topologies.
Pierre-Louis Bossart (2):
ASoC: Intel: soc-acpi: remove unused TGL table with rt5682 only
ASoC: Intel: soc-acpi: remove TGL RVP mixed SoundWire/TDM config
.../intel/common/soc-acpi-intel-tgl-match.c | 23 -------------------
1 file changed, 23 deletions(-)
--
2.25.1
v5.12-rc1 flags new warnings with make W=1, fix missing or broken
function descriptors.
sound/soc/intel/atom/sst/sst_loader.c:85: warning: expecting prototype
for sst_start_merrifield(). Prototype was for sst_start_mrfld()
instead
sound/soc/intel/atom/sst/sst_acpi.c:339: warning: expecting prototype
for intel_sst_remove(). Prototype was for sst_acpi_remove() instead
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210301165349.114952-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TGL RVP can be configured in many ways. We initially supported a
mixed configuration with RT711 in SoundWire mode and RT1308 in
TDM mode.
However Intel teams no longer have any hardware with this
configuration and there are no commercially-available devices using it
either, so let's remove this entry. The corresponding topology will
also be removed from the SOF tree.
This patch partially reverts Commit d985d208bf ("ASoC: Intel: common: add match tables for TGL w/ SoundWire")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210301235637.1177525-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch partially reverts Commit 095ee71907 ("ASoC: Intel: common: add match table for TGL RT5682 SoundWire driver").
This commit was added as an enabling patch before the Maxim98373 codec
driver was available. This codec is now fully functional and the
topology with only RT5682 no longer maintained or used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210301235637.1177525-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Skylake is dependent on SND_SOC_INTEL_SKYLAKE (aka "all SST platforms")
whereas selecting specific configuration such as KBL-only will not
cause driver code to compile. Switch to SND_SOC_INTEL_SKYLAKE_COMMON
dependency so selecting any configuration causes the driver to be built.
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Suggested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Fixes: 35bc99aaa1 ("ASoC: Intel: Skylake: Add more platform granularity")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20210125115441.10383-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the return from snd_soc_dai_set_pll is not checking for
failure, this is the only driver in the kernel that ignores this,
so it probably should be added for sake of completeness. Fix this
by adding an error return check.
Addresses-Coverity: ("Unchecked return value")
Fixes: f139546fb7 ("ASoC: Intel: boards: sof-wm8804: support for Hifiberry Digiplus boards")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210226185653.1071321-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When I added the quirk for the "HP Pavilion x2 10-p0XX" I copied the
byt_rt5640_quirk_table[] entry for the HP Pavilion x2 10-k0XX / 10-n0XX
models since these use almost the same settings.
While doing this I accidentally also copied and kept the non-standard
OVCD_TH_1500UA setting used on those models. This too low threshold is
causing headsets to often be seen as headphones (without a headset-mic)
and when correctly identified it is causing ghost play/pause
button-presses to get detected.
Correct the HP Pavilion x2 10-p0XX quirk to use the default OVCD_TH_2000UA
setting, fixing these problems.
Fixes: fbdae7d6d0 ("ASoC: Intel: bytcr_rt5640: Fix HP Pavilion x2 Detachable quirks")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210224105052.42116-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Acer One S1002 tablet is using an analog mic on IN1 and has
its jack-detect connected to JD2_IN4N, instead of using the default
IN3 for its internal mic and JD1_IN4P for jack-detect.
Note it is also using AIF2 instead of AIF1 which is somewhat unusual,
this is correctly advertised in the ACPI CHAN package, so the speakers
do work without the quirk.
Add a quirk for the mic and jack-detect settings.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a DMI quirk for the Jumper EZpad 7 tablet, this tablet has
a jack-detect switch which reads 1/high when a jack is inserted,
rather then using the standard active-low setup which most
jack-detect switches use. All other settings are using the defaults.
Add a DMI-quirk setting the defaults + the BYT_RT5651_JD_NOT_INV
flags for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Voyo Winpad A15 tablet uses a Bay Trail (non CR) SoC, so it is using
SSP2 (AIF1) and it mostly works with the defaults. But instead of using
DMIC1 it is using an analog mic on IN1, add a quirk for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Estar Beauty HD MID 7316R tablet almost fully works with out default
settings. The only problem is that it has only 1 speaker so any sounds
only playing on the right channel get lost.
Add a quirk for this model using the default settings + MONO_SPEAKER.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SoundWire machine drivers make a heavy use of component prefixes to
uniquify control names. This however results in errors when looking
for widgets or pins. This patchset suggests two solutions but feedback
or suggestions on how to take the prefix into account would be
welcome.
Bard Liao (1):
ASoC: Intel: boards: max98373: get dapm from cpu_dai
Shuming Fan (1):
ASoC: dapm: use component prefix when checking widget names
sound/soc/intel/boards/sof_maxim_common.c | 5 +++--
sound/soc/soc-dapm.c | 13 ++++++++++++-
2 files changed, 15 insertions(+), 3 deletions(-)
--
2.25.1
This device only has a single amplifier on link1, so we need a
dedicated entry to find a match.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We create dai links dynamically, so it is not easy to know what dai
links are created. So adding trace for dai link name and id.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current driver create DMIC dai based on quirk for each platforms,
so we need to add quirk for new platforms. Now driver reports DMIC
number to machine driver and machine driver can create DMIC dai based
on this information. The old check is reserved for some platforms
may be failed to set the DMIC number in BIOS.
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
UCM needs to know which microphone is used (dmic or RT715-based),
let's add the information in the component string.
Note the slight change from HDAudio platforms where 'cfg-dmics' was
used. 'cfg-mics' is used here with the intent that this component
string describes either the number of PCH-attached microphones or the
number of RT715-attached ones (the assumption is that the two
configurations are mutually exclusive).
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the same style for all quirks to avoid misses and errors
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The quirk table is a mess, let's reorganize it by generation before
making sure that the quirks are consistent for each generation.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210208233336.59449-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a prefix on max98373 codec, and the prefix will be added to
the pin name However, there is no prefix on the "Right Spk" and "Left
Spk" widgets.
To avoid getting a redundant prefix, we should get dapm from cpu_dai
component.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208234043.59750-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new ASoc Machine driver for Intel Baytrail platforms with a
Wolfson Microelectronics WM5102 codec.
This is based on a past contributions [1] from Paulo Sergio Travaglia
<pstglia@gmail.com> based on the Levono kernel [2] combined with
insights in things like the speaker GPIO from the android-x86 android
port for the Lenovo Yoga Tablet 2 1051F/L [3].
[1] https://patchwork.kernel.org/project/alsa-devel/patch/593313f5.3636c80a.50e05.47e9@mx.google.com/
[2] https://github.com/lenovo-yt2-dev/android_kernel_lenovo_baytrail/blob/cm-12.1/sound/soc/intel/board/byt_bl_wm5102.c
[3] https://github.com/Kitsune2222/Android_Yoga_Tablet_2-1051F_Kernel
The original machine driver from the Android ports was a crude modified
copy of bytcr_rt5640.c adjusted to work with the WM5102 codec.
This version has been extensively reworked to:
1. Remove all rt5640 related quirk handling. to the best of my knowledge
this setup is only used on the Lenovo Yoga Tablet 2 series (8, 10 and 13
inch models) which all use the same setup. So there is no need to deal
with all the variations with which we need to deal on rt5640 boards.
2. Rework clock handling, properly turn off the FLL and the platform-clock
when they are no longer necessary and don't reconfigure the FLL
unnecessarily when it is already running. This fixes a number of:
"Timed out waiting for lock" warnings being logged.
3. Add the GPIO controlled Speaker-VDD regulator as a DAPM_SUPPLY
This only adds the machine driver and ACPI hooks, the BYT-CR detection
quirk which these devices need will be added in a separate patch.
BugLink: https://github.com/thesofproject/linux/issues/2485
Co-authored-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210120214957.140232-6-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Bay Trail systems:
1. Use a non CR version of the Bay Trail SoC
2. Contain at least 6 interrupt resources so that the
platform_get_resource(pdev, IORESOURCE_IRQ, 5) check to workaround
non CR systems which list their IPC IRQ at index 0 despite being
non CR does not work
3. Despite 1. and 2. still have their IPC IRQ at index 0 rather then 5
Add a DMI quirk table to check for the few known models with this issue,
so that the right IPC IRQ index is used on these systems.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210120214957.140232-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support ALSA IEC958 plugin for KeemBay I2S driver.
Bit manipulation needed as IEC958 format supported by ADV7511 HDMI chip
is not compatible with the ALSA IEC958 plugin format.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Link: https://lore.kernel.org/r/20210204014258.10197-5-jee.heng.sia@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We missed adding the TGL_HDMI quirk which is very much needed to
expose the 4 display pipelines and will be required on TGL topologies.
Fixes: e787f5b5b1 ('ASoC: Intel: add support for new SoundWire hardware layout on TGL')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210204203312.27112-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We missed adding the TGL_HDMI quirk which is very much needed to
expose the 4 display pipelines and will be required on TGL topologies.
Fixes: 488cdbd893 ('ASoC: Intel: sof_sdw: add quirk for new TigerLake-SDCA device')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210204203312.27112-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We missed adding the TGL_HDMI quirk which is very much needed to
expose the 4 display pipelines and will be required on TGL topologies.
Fixes: 9ad9bc59dd ('ASoC: Intel: sof_sdw: set proper flags for Dell TGL-H SKU 0A5E')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210204203312.27112-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Eliminate the following coccicheck warning:
./sound/soc/intel/catpt/pcm.c:355:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/1612166481-121376-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd-soc-acpi-intel-match has duplicate module tags for all
platforms separately. Remove all but one and save some storage
space and cleanup modinfo output.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210128105751.1049837-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ADL will use sof-adl-s.ri if it is ADL-S platform. So let's use
the default_fw_filename in pdata->desc for the ADL FW filename.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210125070500.807474-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
tgl_3_in_1_default link topology may be used by both TGL-LP and TGL-H.
Let's remove the sof_fw_filename setting in struct snd_soc_acpi_mach
and use the default_fw_filename setting in struct sof_dev_desc.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Tested-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210125070500.807474-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add flag "SOF_RT711_JD_SRC_JD2", flag "SOF_RT715_DAI_ID_FIX"
and "SOF_SDW_FOUR_SPK" to the Dell TGL-H based SKU "0A5E".
Signed-off-by: Libin Yang <libin.yang@intel.com>
Co-developed-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210125081117.814488-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clear struct snd_ctl_elem_value before calling ->put() to avoid any data
leak.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210121171644.131059-2-ribalda@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC Intel Skylake driver still has explicit calls of dma_set_mask()
and dma_set_coherent_mask().
Let's simplify with dma_set_mask_and_coherent().
Cc: Cezary Rojewski <cezary.rojewski@intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20210114133337.1039-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi All,
This series adds support for devices with only a headphone jack
(no speakers/internal mic). Specifically this adds support for the
Mele PCG03 Mini PC. But the new no-speakers and no-internal-mic quirks
will likely be useful on other devices too.
Regards,
Hans
Move the snd_soc_dai_set_tdm_slot() call from cht_codec_init() to
cht_codec_fixup(). There are 2 reasons for doing this:
1. This aligns the cht_bsw_nau8824 with all the other BYT/CHT machine
drivers which also do this from their codec_fixup function.
2. When using the SOF driver, things like the TDM info is set from the
topology file. Moving the call to the codec_fixup function, which gets
skipped when using the SOF driver avoids the call interfering with the
settings when using the SOF driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210107115324.11602-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a quirk for the Mele PCG03 Mini PC, being a Mini PC this device
has no speakers and no internal microphone.
To make matters worse the speaker output pins are shorted (to gnd or
to each other?) and SPKVDD is provided. So trying to output sound on the
speakers leads to shorting SPKVDD, this leads to a power dip after
which the codec is an unknown state. Sometimes it drops of the i2c
bus, sometimes it does still respond to i2c transfers, but is otherwise
not functional. TL;DR: trying to use the speaker outputs on this model
is BAD.
Besides not having speakers / an internal mic, this is a Bay Trail CR
device without a CHAN package in ACPI, so we default to SSP0-AIF2 as
codec connection. But the device is actually using SSP0-AIF1, so we
need to quirk that too.
Cc: Rasmus Porsager <rasmus@beat.dk>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210109210119.159032-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some devices, like mini PCs/media/top-set boxes do not have an internal
microphone at all, an example of the is the Mele PCG03 Mini PC.
Add a new BYT_RT5640_NO_INTERNAL_MIC_MAP input-mapping for this,
which does not add any internal-mic routes and modifies the components
and the (optional) long_name strings to reflect this.
Cc: Rasmus Porsager <rasmus@beat.dk>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210109210119.159032-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some devices, like mini PCs/media/top-set boxes do not have any speakers
at all, an example of the is the Mele PCG03 Mini PC.
Add a new BYT_RT5640_NO_SPEAKERS quirk-flag which when sets does not add
speaker routes and modifies the components and the (optional) long_name
strings to reflect that there are no speakers.
Cc: Rasmus Porsager <rasmus@beat.dk>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210109210119.159032-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
