korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-14 14:34:28 +08:00
Code Issues Packages Projects Releases Wiki Activity
805,267 Commits 113 Branches 5,294 Tags 3.6 GiB
23eddf39b2
Commit Graph

37153 Commits

Author SHA1 Message Date
Minchan Kim
23eddf39b2 zram: add bd_stat statistics 
bd_stat represents things that happened in the backing device.  Currently
it supports bd_counts, bd_reads and bd_writes which are helpful to
understand wearout of flash and memory saving.

[minchan@kernel.org: v4]
  Link: http://lkml.kernel.org/r/20181203024045.153534-7-minchan@kernel.org
Link: http://lkml.kernel.org/r/20181127055429.251614-7-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Joey Pabalinas <joeypabalinas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2018-12-28 12:11:49 -08:00
Minchan Kim
a939888ec3 zram: support idle/huge page writeback 
Add a new feature "zram idle/huge page writeback".  In the zram-swap use
case, zram usually has many idle/huge swap pages.  It's pointless to keep
them in memory (ie, zram).

To solve this problem, this feature introduces idle/huge page writeback to
the backing device so the goal is to save more memory space on embedded
systems.

Normal sequence to use idle/huge page writeback feature is as follows,

while (1) {
        # mark allocated zram slot to idle
        echo all > /sys/block/zram0/idle
        # leave system working for several hours
        # Unless there is no access for some blocks on zram,
	# they are still IDLE marked pages.

        echo "idle" > /sys/block/zram0/writeback
	or/and
	echo "huge" > /sys/block/zram0/writeback
        # write the IDLE or/and huge marked slot into backing device
	# and free the memory.
}

Per the discussion at
https://lore.kernel.org/lkml/20181122065926.GG3441@jagdpanzerIV/T/#u,

This patch removes direct incommpressibe page writeback feature
(d2afd25114f4 ("zram: write incompressible pages to backing device")).

Below concerns from Sergey:
== &< ==

"IDLE writeback" is superior to "incompressible writeback".

"incompressible writeback" is completely unpredictable and uncontrollable;
it depens on data patterns and compression algorithms.  While "IDLE
writeback" is predictable.

I even suspect, that, *ideally*, we can remove "incompressible writeback".
"IDLE pages" is a super set which also includes "incompressible" pages.
So, technically, we still can do "incompressible writeback" from "IDLE
writeback" path; but a much more reasonable one, based on a page idling
period.

I understand that you want to keep "direct incompressible writeback"
around.  ZRAM is especially popular on devices which do suffer from flash
wearout, so I can see "incompressible writeback" path becoming a dead
code, long term.

== &< ==

Below concerns from Minchan:
== &< ==

My concern is if we enable CONFIG_ZRAM_WRITEBACK in this implementation,
both hugepage/idlepage writeck will turn on.  However someuser want to
enable only idlepage writeback so we need to introduce turn on/off knob
for hugepage or new CONFIG_ZRAM_IDLEPAGE_WRITEBACK for those usecase.  I
don't want to make it complicated *if possible*.

Long term, I imagine we need to make VM aware of new swap hierarchy a
little bit different with as-is.  For example, first high priority swap
can return -EIO or -ENOCOMP, swap try to fallback to next lower priority
swap device.  With that, hugepage writeback will work tranparently.

So we could regard it as regression because incompressible pages doesn't
go to backing storage automatically.  Instead, user should do it via "echo
huge" > /sys/block/zram/writeback" manually.

== &< ==

Link: http://lkml.kernel.org/r/20181127055429.251614-6-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2018-12-28 12:11:49 -08:00
Minchan Kim
e82592c4fd zram: introduce ZRAM_IDLE flag 
To support idle page writeback with upcoming patches, this patch
introduces a new ZRAM_IDLE flag.

Userspace can mark zram slots as "idle" via
	"echo all > /sys/block/zramX/idle"
which marks every allocated zram slot as ZRAM_IDLE.
User could see it by /sys/kernel/debug/zram/zram0/block_state.

          300    75.033841 ...i
          301    63.806904 s..i
          302    63.806919 ..hi

Once there is IO for the slot, the mark will be disappeared.

	  300    75.033841 ...
          301    63.806904 s..i
          302    63.806919 ..hi

Therefore, 300th block is idle zpage. With this feature,
user can how many zram has idle pages which are waste of memory.

Link: http://lkml.kernel.org/r/20181127055429.251614-5-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2018-12-28 12:11:49 -08:00
Mel Gorman
1c30844d2d mm: reclaim small amounts of memory when an external fragmentation event occurs 
An external fragmentation event was previously described as

    When the page allocator fragments memory, it records the event using
    the mm_page_alloc_extfrag event. If the fallback_order is smaller
    than a pageblock order (order-9 on 64-bit x86) then it's considered
    an event that will cause external fragmentation issues in the future.

The kernel reduces the probability of such events by increasing the
watermark sizes by calling set_recommended_min_free_kbytes early in the
lifetime of the system.  This works reasonably well in general but if
there are enough sparsely populated pageblocks then the problem can still
occur as enough memory is free overall and kswapd stays asleep.

This patch introduces a watermark_boost_factor sysctl that allows a zone
watermark to be temporarily boosted when an external fragmentation causing
events occurs.  The boosting will stall allocations that would decrease
free memory below the boosted low watermark and kswapd is woken if the
calling context allows to reclaim an amount of memory relative to the size
of the high watermark and the watermark_boost_factor until the boost is
cleared.  When kswapd finishes, it wakes kcompactd at the pageblock order
to clean some of the pageblocks that may have been affected by the
fragmentation event.  kswapd avoids any writeback, slab shrinkage and swap
from reclaim context during this operation to avoid excessive system
disruption in the name of fragmentation avoidance.  Care is taken so that
kswapd will do normal reclaim work if the system is really low on memory.

This was evaluated using the same workloads as "mm, page_alloc: Spread
allocations across zones before introducing fragmentation".

1-socket Skylake machine
config-global-dhp__workload_thpfioscale XFS (no special madvise)
4 fio threads, 1 THP allocating thread
--------------------------------------

4.20-rc3 extfrag events < order 9:   804694
4.20-rc3+patch:                      408912 (49% reduction)
4.20-rc3+patch1-4:                    18421 (98% reduction)

                                   4.20.0-rc3             4.20.0-rc3
                                 lowzone-v5r8             boost-v5r8
Amean     fault-base-1      653.58 (   0.00%)      652.71 (   0.13%)
Amean     fault-huge-1        0.00 (   0.00%)      178.93 * -99.00%*

                              4.20.0-rc3             4.20.0-rc3
                            lowzone-v5r8             boost-v5r8
Percentage huge-1        0.00 (   0.00%)        5.12 ( 100.00%)

Note that external fragmentation causing events are massively reduced by
this path whether in comparison to the previous kernel or the vanilla
kernel.  The fault latency for huge pages appears to be increased but that
is only because THP allocations were successful with the patch applied.

1-socket Skylake machine
global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE)
-----------------------------------------------------------------

4.20-rc3 extfrag events < order 9:  291392
4.20-rc3+patch:                     191187 (34% reduction)
4.20-rc3+patch1-4:                   13464 (95% reduction)

thpfioscale Fault Latencies
                                   4.20.0-rc3             4.20.0-rc3
                                 lowzone-v5r8             boost-v5r8
Min       fault-base-1      912.00 (   0.00%)      905.00 (   0.77%)
Min       fault-huge-1      127.00 (   0.00%)      135.00 (  -6.30%)
Amean     fault-base-1     1467.55 (   0.00%)     1481.67 (  -0.96%)
Amean     fault-huge-1     1127.11 (   0.00%)     1063.88 *   5.61%*

                              4.20.0-rc3             4.20.0-rc3
                            lowzone-v5r8             boost-v5r8
Percentage huge-1       77.64 (   0.00%)       83.46 (   7.49%)

As before, massive reduction in external fragmentation events, some jitter
on latencies and an increase in THP allocation success rates.

2-socket Haswell machine
config-global-dhp__workload_thpfioscale XFS (no special madvise)
4 fio threads, 5 THP allocating threads
----------------------------------------------------------------

4.20-rc3 extfrag events < order 9:  215698
4.20-rc3+patch:                     200210 (7% reduction)
4.20-rc3+patch1-4:                   14263 (93% reduction)

                                   4.20.0-rc3             4.20.0-rc3
                                 lowzone-v5r8             boost-v5r8
Amean     fault-base-5     1346.45 (   0.00%)     1306.87 (   2.94%)
Amean     fault-huge-5     3418.60 (   0.00%)     1348.94 (  60.54%)

                              4.20.0-rc3             4.20.0-rc3
                            lowzone-v5r8             boost-v5r8
Percentage huge-5        0.78 (   0.00%)        7.91 ( 910.64%)

There is a 93% reduction in fragmentation causing events, there is a big
reduction in the huge page fault latency and allocation success rate is
higher.

2-socket Haswell machine
global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE)
-----------------------------------------------------------------

4.20-rc3 extfrag events < order 9: 166352
4.20-rc3+patch:                    147463 (11% reduction)
4.20-rc3+patch1-4:                  11095 (93% reduction)

thpfioscale Fault Latencies
                                   4.20.0-rc3             4.20.0-rc3
                                 lowzone-v5r8             boost-v5r8
Amean     fault-base-5     6217.43 (   0.00%)     7419.67 * -19.34%*
Amean     fault-huge-5     3163.33 (   0.00%)     3263.80 (  -3.18%)

                              4.20.0-rc3             4.20.0-rc3
                            lowzone-v5r8             boost-v5r8
Percentage huge-5       95.14 (   0.00%)       87.98 (  -7.53%)

There is a large reduction in fragmentation events with some jitter around
the latencies and success rates.  As before, the high THP allocation
success rate does mean the system is under a lot of pressure.  However, as
the fragmentation events are reduced, it would be expected that the
long-term allocation success rate would be higher.

Link: http://lkml.kernel.org/r/20181123114528.28802-5-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2018-12-28 12:11:48 -08:00
Andrey Konovalov
b3b0e6accb kasan: update documentation 
This patch updates KASAN documentation to reflect the addition of the new
tag-based mode.

Link: http://lkml.kernel.org/r/aabef9de317c54b8a3919a4946ce534c6576726a.1544099024.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2018-12-28 12:11:44 -08:00
Linus Torvalds
b71acb0e37 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 
Pull crypto updates from Herbert Xu:
 "API:
   - Add 1472-byte test to tcrypt for IPsec
   - Reintroduced crypto stats interface with numerous changes
   - Support incremental algorithm dumps

  Algorithms:
   - Add xchacha12/20
   - Add nhpoly1305
   - Add adiantum
   - Add streebog hash
   - Mark cts(cbc(aes)) as FIPS allowed

  Drivers:
   - Improve performance of arm64/chacha20
   - Improve performance of x86/chacha20
   - Add NEON-accelerated nhpoly1305
   - Add SSE2 accelerated nhpoly1305
   - Add AVX2 accelerated nhpoly1305
   - Add support for 192/256-bit keys in gcmaes AVX
   - Add SG support in gcmaes AVX
   - ESN for inline IPsec tx in chcr
   - Add support for CryptoCell 703 in ccree
   - Add support for CryptoCell 713 in ccree
   - Add SM4 support in ccree
   - Add SM3 support in ccree
   - Add support for chacha20 in caam/qi2
   - Add support for chacha20 + poly1305 in caam/jr
   - Add support for chacha20 + poly1305 in caam/qi2
   - Add AEAD cipher support in cavium/nitrox"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (130 commits)
  crypto: skcipher - remove remnants of internal IV generators
  crypto: cavium/nitrox - Fix build with !CONFIG_DEBUG_FS
  crypto: salsa20-generic - don't unnecessarily use atomic walk
  crypto: skcipher - add might_sleep() to skcipher_walk_virt()
  crypto: x86/chacha - avoid sleeping under kernel_fpu_begin()
  crypto: cavium/nitrox - Added AEAD cipher support
  crypto: mxc-scc - fix build warnings on ARM64
  crypto: api - document missing stats member
  crypto: user - remove unused dump functions
  crypto: chelsio - Fix wrong error counter increments
  crypto: chelsio - Reset counters on cxgb4 Detach
  crypto: chelsio - Handle PCI shutdown event
  crypto: chelsio - cleanup:send addr as value in function argument
  crypto: chelsio - Use same value for both channel in single WR
  crypto: chelsio - Swap location of AAD and IV sent in WR
  crypto: chelsio - remove set but not used variable 'kctx_len'
  crypto: ux500 - Use proper enum in hash_set_dma_transfer
  crypto: ux500 - Use proper enum in cryp_set_dma_transfer
  crypto: aesni - Add scatter/gather avx stubs, and use them in C
  crypto: aesni - Introduce partial block macro
  ..
 2018-12-27 13:53:32 -08:00
Linus Torvalds
e0c38a4d1f Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 
Pull networking updates from David Miller:

 1) New ipset extensions for matching on destination MAC addresses, from
    Stefano Brivio.

 2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to
    nfp driver. From Stefano Brivio.

 3) Implement GRO for plain UDP sockets, from Paolo Abeni.

 4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT
    bit so that we could support the entire vlan_tci value.

 5) Rework the IPSEC policy lookups to better optimize more usecases,
    from Florian Westphal.

 6) Infrastructure changes eliminating direct manipulation of SKB lists
    wherever possible, and to always use the appropriate SKB list
    helpers. This work is still ongoing...

 7) Lots of PHY driver and state machine improvements and
    simplifications, from Heiner Kallweit.

 8) Various TSO deferral refinements, from Eric Dumazet.

 9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov.

10) Batch dropping of XDP packets in tuntap, from Jason Wang.

11) Lots of cleanups and improvements to the r8169 driver from Heiner
    Kallweit, including support for ->xmit_more. This driver has been
    getting some much needed love since he started working on it.

12) Lots of new forwarding selftests from Petr Machata.

13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel.

14) Packed ring support for virtio, from Tiwei Bie.

15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov.

16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu.

17) Implement coalescing on TCP backlog queue, from Eric Dumazet.

18) Implement carrier change in tun driver, from Nicolas Dichtel.

19) Support msg_zerocopy in UDP, from Willem de Bruijn.

20) Significantly improve garbage collection of neighbor objects when
    the table has many PERMANENT entries, from David Ahern.

21) Remove egdev usage from nfp and mlx5, and remove the facility
    completely from the tree as it no longer has any users. From Oz
    Shlomo and others.

22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and
    therefore abort the operation before the commit phase (which is the
    NETDEV_CHANGEADDR event). From Petr Machata.

23) Add indirect call wrappers to avoid retpoline overhead, and use them
    in the GRO code paths. From Paolo Abeni.

24) Add support for netlink FDB get operations, from Roopa Prabhu.

25) Support bloom filter in mlxsw driver, from Nir Dotan.

26) Add SKB extension infrastructure. This consolidates the handling of
    the auxiliary SKB data used by IPSEC and bridge netfilter, and is
    designed to support the needs to MPTCP which could be integrated in
    the future.

27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits)
  net: dccp: fix kernel crash on module load
  drivers/net: appletalk/cops: remove redundant if statement and mask
  bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw
  net/net_namespace: Check the return value of register_pernet_subsys()
  net/netlink_compat: Fix a missing check of nla_parse_nested
  ieee802154: lowpan_header_create check must check daddr
  net/mlx4_core: drop useless LIST_HEAD
  mlxsw: spectrum: drop useless LIST_HEAD
  net/mlx5e: drop useless LIST_HEAD
  iptunnel: Set tun_flags in the iptunnel_metadata_reply from src
  net/mlx5e: fix semicolon.cocci warnings
  staging: octeon: fix build failure with XFRM enabled
  net: Revert recent Spectre-v1 patches.
  can: af_can: Fix Spectre v1 vulnerability
  packet: validate address length if non-zero
  nfc: af_nfc: Fix Spectre v1 vulnerability
  phonet: af_phonet: Fix Spectre v1 vulnerability
  net: core: Fix Spectre v1 vulnerability
  net: minor cleanup in skb_ext_add()
  net: drop the unused helper skb_ext_get()
  ...
 2018-12-27 13:04:52 -08:00
Linus Torvalds
fb2a624d5f selinux/stable-4.21 PR 20181224 
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAlwhAjMUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXPF3RAAkM8wRBk3PoH68kgKsbcsE6MTyoVK
 tneNt/brRSG11sFhRNONE7TqfM+yM68BqsTRDL1Jn36ONnfL9VB49myHyDBR4jqj
 FSvvi58UhixwOQNyi7aQEEGg4ltenlcM3HJLPlmWr/PXDRiklBgfzobkKpKr7QWR
 NdME4/u2OTO+BWbIJZ1+d8kJoSsYPiPIQLRS85kpZ/bgl0Y92QYRJoWUNfmq9/Og
 al91gVCSqAy6LmWLD0ddrc8xH7YDG8T/ngBHNIUb04FPHlxwJgX8BKQA7nABKntL
 e+wy40FpuqAuZBMbOj6/NX5gHF12fMSq1oZx41OEmL0JqqzLDuBNKlN7IWMXgZEJ
 96HcFRzJWydxmf645GnMR3qsHcSvLhNGGCOXiX3NdhEsO3tJ2sJs5Jz/Af7pN9f+
 Jk8ihOqOf9jd6jIW74Iev92RPOnh8aau20tueOaA/sS6t4ByyNRxFodi82x3htNg
 IN0z6DGBIa/aEMjfLRN5Ihj0I7Y184fWW/mGfPTZnnjifjhTWacbHKa3b4BtfsA/
 ZXp/QWBhY3fGNy3+rd3j1u3ZGz/4kfoGZUIlT0LssXpnQzP2H0T74CSbIbQj1Dgf
 rZq34A3wndYI1AZwo/0I/sd0lwW538peQ9zPe88gZhh02IwNEjVRzoA+a1oLVywQ
 3vIyeD++NrB6HGM=
 =uWQk
 -----END PGP SIGNATURE-----

Merge tag 'selinux-pr-20181224' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux

Pull selinux patches from Paul Moore:
 "I already used my best holiday pull request lines in the audit pull
  request, so this one is going to be a bit more boring, sorry about
  that. To make up for this, we do have a birthday of sorts to
  celebrate: SELinux turns 18 years old this December. Perhaps not the
  most exciting thing in the world for most people, but I think it's
  safe to say that anyone reading this email doesn't exactly fall into
  the "most people" category.

  Back to business and the pull request itself:

  Ondrej has five patches in this pull request and I lump them into
  three categories: one patch to always allow submounts (using similar
  logic to elsewhere in the kernel), one to fix some issues with the
  SELinux policydb, and the others to cleanup and improve the SELinux
  sidtab.

  The other patches from Alexey and Petr and trivial fixes that are
  adequately described in their respective subject lines.

  With this last pull request of the year, I want to thank everyone who
  has contributed patches, testing, and reviews to the SELinux project
  this year, and the past 18 years. Like any good open source effort,
  SELinux is only as good as the community which supports it, and I'm
  very happy that we have the community we do - thank you all!"

* tag 'selinux-pr-20181224' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: overhaul sidtab to fix bug and improve performance
  selinux: use separate table for initial SID lookup
  selinux: make "selinux_policycap_names[]" const char *
  selinux: always allow mounting submounts
  selinux: refactor sidtab conversion
  Documentation: Update SELinux reference policy URL
  selinux: policydb - fix byte order and alignment issues
 2018-12-27 12:01:58 -08:00
Linus Torvalds
8d6973327e powerpc updates for 4.21 
Notable changes:
 
  - Mitigations for Spectre v2 on some Freescale (NXP) CPUs.
 
  - A large series adding support for pass-through of Nvidia V100 GPUs to guests
    on Power9.
 
  - Another large series to enable hardware assistance for TLB table walk on
    MPC8xx CPUs.
 
  - Some preparatory changes to our DMA code, to make way for further cleanups
    from Christoph.
 
  - Several fixes for our Transactional Memory handling discovered by fuzzing the
    signal return path.
 
  - Support for generating our system call table(s) from a text file like other
    architectures.
 
  - A fix to our page fault handler so that instead of generating a WARN_ON_ONCE,
    user accesses of kernel addresses instead print a ratelimited and
    appropriately scary warning.
 
  - A cosmetic change to make our unhandled page fault messages more similar to
    other arches and also more compact and informative.
 
  - Freescale updates from Scott:
    "Highlights include elimination of legacy clock bindings use from dts
     files, an 83xx watchdog handler, fixes to old dts interrupt errors, and
     some minor cleanup."
 
 And many clean-ups, reworks and minor fixes etc.
 
 Thanks to:
  Alexandre Belloni, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
  Arnd Bergmann, Benjamin Herrenschmidt, Breno Leitao, Christian Lamparter,
  Christophe Leroy, Christoph Hellwig, Daniel Axtens, Darren Stevens, David
  Gibson, Diana Craciun, Dmitry V. Levin, Firoz Khan, Geert Uytterhoeven, Greg
  Kurz, Gustavo Romero, Hari Bathini, Joel Stanley, Kees Cook, Madhavan
  Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Michal
  Suchánek, Naveen N. Rao, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras,
  Ram Pai, Ravi Bangoria, Rob Herring, Russell Currey, Sabyasachi Gupta, Sam
  Bobroff, Satheesh Rajendran, Scott Wood, Segher Boessenkool, Stephen Rothwell,
  Tang Yuantian, Thiago Jung Bauermann, Yangtao Li, Yuantian Tang, Yue Haibing.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcJLwZAAoJEFHr6jzI4aWAAv4P/jMvP52lA90i2E8G72LOVSF1
 33DbE/Okib3VfmmMcXZpgpEfwIcEmJcIj86WWcLWzBfXLunehkgwh+AOfBLwqWch
 D08+RR9EZb7ppvGe91hvSgn4/28CWVKAxuDviSuoE1OK8lOTncu889r2+AxVFZiY
 f6Al9UPlB3FTJonNx8iO4r/GwrPigukjbzp1vkmJJg59LvNUrMQ1Fgf9D3cdlslH
 z4Ff9zS26RJy7cwZYQZI4sZXJZmeQ1DxOZ+6z6FL/nZp/O4WLgpw6C6o1+vxo1kE
 9ZnO/3+zIRhoWiXd6OcOQXBv3NNCjJZlXh9HHAiL8m5ZqbmxrStQWGyKW/jjEZuK
 wVHxfUT19x9Qy1p+BH3XcUNMlxchYgcCbEi5yPX2p9ZDXD6ogNG7sT1+NO+FBTww
 ueCT5PCCB/xWOccQlBErFTMkFXFLtyPDNFK7BkV7uxbH0PQ+9guCvjWfBZti6wjD
 /6NK4mk7FpmCiK13Y1xjwC5OqabxLUYwtVuHYOMr5TOPh8URUPS4+0pIOdoYDM6z
 Ensrq1CC843h59MWADgFHSlZ78FRtZlG37JAXunjLbqGupLOvL7phC9lnwkylHga
 2hWUWFeOV8HFQBP4gidZkLk64pkT9LzqHgdgIB4wUwrhc8r2mMZGdQTq5H7kOn3Q
 n9I48PWANvEC0PBCJ/KL
 =cr6s
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - Mitigations for Spectre v2 on some Freescale (NXP) CPUs.

   - A large series adding support for pass-through of Nvidia V100 GPUs
     to guests on Power9.

   - Another large series to enable hardware assistance for TLB table
     walk on MPC8xx CPUs.

   - Some preparatory changes to our DMA code, to make way for further
     cleanups from Christoph.

   - Several fixes for our Transactional Memory handling discovered by
     fuzzing the signal return path.

   - Support for generating our system call table(s) from a text file
     like other architectures.

   - A fix to our page fault handler so that instead of generating a
     WARN_ON_ONCE, user accesses of kernel addresses instead print a
     ratelimited and appropriately scary warning.

   - A cosmetic change to make our unhandled page fault messages more
     similar to other arches and also more compact and informative.

   - Freescale updates from Scott:
       "Highlights include elimination of legacy clock bindings use from
        dts files, an 83xx watchdog handler, fixes to old dts interrupt
        errors, and some minor cleanup."

  And many clean-ups, reworks and minor fixes etc.

  Thanks to: Alexandre Belloni, Alexey Kardashevskiy, Andrew Donnellan,
  Aneesh Kumar K.V, Arnd Bergmann, Benjamin Herrenschmidt, Breno Leitao,
  Christian Lamparter, Christophe Leroy, Christoph Hellwig, Daniel
  Axtens, Darren Stevens, David Gibson, Diana Craciun, Dmitry V. Levin,
  Firoz Khan, Geert Uytterhoeven, Greg Kurz, Gustavo Romero, Hari
  Bathini, Joel Stanley, Kees Cook, Madhavan Srinivasan, Mahesh
  Salgaonkar, Markus Elfring, Mathieu Malaterre, Michal Suchánek, Naveen
  N. Rao, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras, Ram Pai,
  Ravi Bangoria, Rob Herring, Russell Currey, Sabyasachi Gupta, Sam
  Bobroff, Satheesh Rajendran, Scott Wood, Segher Boessenkool, Stephen
  Rothwell, Tang Yuantian, Thiago Jung Bauermann, Yangtao Li, Yuantian
  Tang, Yue Haibing"

* tag 'powerpc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (201 commits)
  Revert "powerpc/fsl_pci: simplify fsl_pci_dma_set_mask"
  powerpc/zImage: Also check for stdout-path
  powerpc: Fix HMIs on big-endian with CONFIG_RELOCATABLE=y
  macintosh: Use of_node_name_{eq, prefix} for node name comparisons
  ide: Use of_node_name_eq for node name comparisons
  powerpc: Use of_node_name_eq for node name comparisons
  powerpc/pseries/pmem: Convert to %pOFn instead of device_node.name
  powerpc/mm: Remove very old comment in hash-4k.h
  powerpc/pseries: Fix node leak in update_lmb_associativity_index()
  powerpc/configs/85xx: Enable CONFIG_DEBUG_KERNEL
  powerpc/dts/fsl: Fix dtc-flagged interrupt errors
  clk: qoriq: add more compatibles strings
  powerpc/fsl: Use new clockgen binding
  powerpc/83xx: handle machine check caused by watchdog timer
  powerpc/fsl-rio: fix spelling mistake "reserverd" -> "reserved"
  powerpc/fsl_pci: simplify fsl_pci_dma_set_mask
  arch/powerpc/fsl_rmu: Use dma_zalloc_coherent
  vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver
  vfio_pci: Allow regions to add own capabilities
  vfio_pci: Allow mapping extra regions
  ...
 2018-12-27 10:43:24 -08:00
Linus Torvalds
792bf4d871 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull RCU updates from Ingo Molnar:
 "The biggest RCU changes in this cycle were:

   - Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar.

   - Replace calls of RCU-bh and RCU-sched update-side functions to
     their vanilla RCU counterparts. This series is a step towards
     complete removal of the RCU-bh and RCU-sched update-side functions.

     ( Note that some of these conversions are going upstream via their
       respective maintainers. )

   - Documentation updates, including a number of flavor-consolidation
     updates from Joel Fernandes.

   - Miscellaneous fixes.

   - Automate generation of the initrd filesystem used for rcutorture
     testing.

   - Convert spin_is_locked() assertions to instead use lockdep.

     ( Note that some of these conversions are going upstream via their
       respective maintainers. )

   - SRCU updates, especially including a fix from Dennis Krein for a
     bag-on-head-class bug.

   - RCU torture-test updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits)
  rcutorture: Don't do busted forward-progress testing
  rcutorture: Use 100ms buckets for forward-progress callback histograms
  rcutorture: Recover from OOM during forward-progress tests
  rcutorture: Print forward-progress test age upon failure
  rcutorture: Print time since GP end upon forward-progress failure
  rcutorture: Print histogram of CB invocation at OOM time
  rcutorture: Print GP age upon forward-progress failure
  rcu: Print per-CPU callback counts for forward-progress failures
  rcu: Account for nocb-CPU callback counts in RCU CPU stall warnings
  rcutorture: Dump grace-period diagnostics upon forward-progress OOM
  rcutorture: Prepare for asynchronous access to rcu_fwd_startat
  torture: Remove unnecessary "ret" variables
  rcutorture: Affinity forward-progress test to avoid housekeeping CPUs
  rcutorture: Break up too-long rcu_torture_fwd_prog() function
  rcutorture: Remove cbflood facility
  torture: Bring any extra CPUs online during kernel startup
  rcutorture: Add call_rcu() flooding forward-progress tests
  rcutorture/formal: Replace synchronize_sched() with synchronize_rcu()
  tools/kernel.h: Replace synchronize_sched() with synchronize_rcu()
  net/decnet: Replace rcu_barrier_bh() with rcu_barrier()
  ...
 2018-12-26 13:07:19 -08:00
Linus Torvalds
a52fb43a5f Merge branch 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull x86 cache control updates from Borislav Petkov:

 - The generalization of the RDT code to accommodate the addition of
   AMD's very similar implementation of the cache monitoring feature.

   This entails a subsystem move into a separate and generic
   arch/x86/kernel/cpu/resctrl/ directory along with adding
   vendor-specific initialization and feature detection helpers.

   Ontop of that is the unification of user-visible strings, both in the
   resctrl filesystem error handling and Kconfig.

   Provided by Babu Moger and Sherry Hurwitz.

 - Code simplifications and error handling improvements by Reinette
   Chatre.

* 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Fix rdt_find_domain() return value and checks
  x86/resctrl: Remove unnecessary check for cbm_validate()
  x86/resctrl: Use rdt_last_cmd_puts() where possible
  MAINTAINERS: Update resctrl filename patterns
  Documentation: Rename and update intel_rdt_ui.txt to resctrl_ui.txt
  x86/resctrl: Introduce AMD QOS feature
  x86/resctrl: Fixup the user-visible strings
  x86/resctrl: Add AMD's X86_FEATURE_MBA to the scattered CPUID features
  x86/resctrl: Rename the config option INTEL_RDT to RESCTRL
  x86/resctrl: Add vendor check for the MBA software controller
  x86/resctrl: Bring cbm_validate() into the resource structure
  x86/resctrl: Initialize the vendor-specific resource functions
  x86/resctrl: Move all the macros to resctrl/internal.h
  x86/resctrl: Re-arrange the RDT init code
  x86/resctrl: Rename the RDT functions and definitions
  x86/resctrl: Rename and move rdt files to a separate directory
 2018-12-26 12:17:43 -08:00
Linus Torvalds
42b00f122c * ARM: selftests improvements, large PUD support for HugeTLB, 
single-stepping fixes, improved tracing, various timer and vGIC
 fixes
 
 * x86: Processor Tracing virtualization, STIBP support, some correctness fixes,
 refactorings and splitting of vmx.c, use the Hyper-V range TLB flush hypercall,
 reduce order of vcpu struct, WBNOINVD support, do not use -ftrace for __noclone
 functions, nested guest support for PAUSE filtering on AMD, more Hyper-V
 enlightenments (direct mode for synthetic timers)
 
 * PPC: nested VFIO
 
 * s390: bugfixes only this time
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJcH0vFAAoJEL/70l94x66Dw/wH/2FZp1YOM5OgiJzgqnXyDbyf
 dNEfWo472MtNiLsuf+ZAfJojVIu9cv7wtBfXNzW+75XZDfh/J88geHWNSiZDm3Fe
 aM4MOnGG0yF3hQrRQyEHe4IFhGFNERax8Ccv+OL44md9CjYrIrsGkRD08qwb+gNh
 P8T/3wJEKwUcVHA/1VHEIM8MlirxNENc78p6JKd/C7zb0emjGavdIpWFUMr3SNfs
 CemabhJUuwOYtwjRInyx1y34FzYwW3Ejuc9a9UoZ+COahUfkuxHE8u+EQS7vLVF6
 2VGVu5SA0PqgmLlGhHthxLqVgQYo+dB22cRnsLtXlUChtVAq8q9uu5sKzvqEzuE=
 =b4Jx
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "ARM:
   - selftests improvements
   - large PUD support for HugeTLB
   - single-stepping fixes
   - improved tracing
   - various timer and vGIC fixes

  x86:
   - Processor Tracing virtualization
   - STIBP support
   - some correctness fixes
   - refactorings and splitting of vmx.c
   - use the Hyper-V range TLB flush hypercall
   - reduce order of vcpu struct
   - WBNOINVD support
   - do not use -ftrace for __noclone functions
   - nested guest support for PAUSE filtering on AMD
   - more Hyper-V enlightenments (direct mode for synthetic timers)

  PPC:
   -  nested VFIO

  s390:
   - bugfixes only this time"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits)
  KVM: x86: Add CPUID support for new instruction WBNOINVD
  kvm: selftests: ucall: fix exit mmio address guessing
  Revert "compiler-gcc: disable -ftracer for __noclone functions"
  KVM: VMX: Move VM-Enter + VM-Exit handling to non-inline sub-routines
  KVM: VMX: Explicitly reference RCX as the vmx_vcpu pointer in asm blobs
  KVM: x86: Use jmp to invoke kvm_spurious_fault() from .fixup
  MAINTAINERS: Add arch/x86/kvm sub-directories to existing KVM/x86 entry
  KVM/x86: Use SVM assembly instruction mnemonics instead of .byte streams
  KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()
  KVM/MMU: Flush tlb directly in kvm_set_pte_rmapp()
  KVM/MMU: Move tlb flush in kvm_set_pte_rmapp() to kvm_mmu_notifier_change_pte()
  KVM: Make kvm_set_spte_hva() return int
  KVM: Replace old tlb flush function with new one to flush a specified range.
  KVM/MMU: Add tlb flush with range helper function
  KVM/VMX: Add hv tlb range flush support
  x86/hyper-v: Add HvFlushGuestAddressList hypercall support
  KVM: Add tlb_remote_flush_with_range callback in kvm_x86_ops
  KVM: x86: Disable Intel PT when VMXON in L1 guest
  KVM: x86: Set intercept for Intel PT MSRs read/write
  KVM: x86: Implement Intel PT MSRs read/write emulation
  ...
 2018-12-26 11:46:28 -08:00
Linus Torvalds
89261c5702 Here's the main MIPS pull for Linux 4.21. Core architecture changes 
include:
 
  - Syscall tables & definitions for unistd.h are now generated by
    scripts, providing greater consistency with other architectures &
    making it easier to add new syscalls.
 
  - Support for building kernels with no floating point support, upon
    which any userland attempting to use floating point instructions will
    receive a SIGILL. Mostly useful to shrink the kernel & as preparation
    for nanoMIPS support which does not yet include FP.
 
  - MIPS SIMD Architecture (MSA) vector register context is now exposed
    by ptrace via a new NT_MIPS_MSA regset.
 
  - ASIDs are now stored as 64b values even for MIPS32 kernels, expanding
    the ASID version field sufficiently that we don't need to worry about
    overflow & avoiding rare issues with reused ASIDs that have been
    observed in the wild.
 
  - The branch delay slot "emulation" page is now mapped without write
    permission for the user, preventing its use as a nice location for
    attacks to execute malicious code from.
 
  - Support for ioremap_prot(), primarily to allow gdb or other
    ptrace users the ability to view their tracee's memory using the same
    cache coherency attribute.
 
  - Optimizations to more cpu_has_* macros, allowing more to be
    compile-time constant where possible.
 
  - Enable building the whole kernel with UBSAN instrumentation.
 
  - Enable building the kernel with link-time dead code & data
    elimination.
 
 Platform specific changes include:
 
  - The Boston board gains a workaround for DMA prefetching issues with
    the EG20T Platform Controller Hub that it uses.
 
  - Cleanups to Cavium Octeon code removing about 20k lines of redundant
    code, mostly unused or duplicate register definitions in headers.
 
  - defconfig updates for the DECstation machines, including new
    defconfigs for r4k & 64b machines.
 
  - Further work on Loongson 3 support.
 
  - DMA fixes for SiByte machines.
 -----BEGIN PGP SIGNATURE-----
 
 iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXB+vwBUccGF1bC5idXJ0
 b25AbWlwcy5jb20ACgkQPqefrLV1AN3/EgD9Givei//X2oTd4w8HSe/uPeVkMnbA
 93WMi1cS0EogAaUA/R7poLSnAE74mt+DT4PrGdQezUbXts9vUF/7VX0MvFIF
 =hmtJ
 -----END PGP SIGNATURE-----

Merge tag 'mips_4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Paul Burton:
 "Here's the main MIPS pull for Linux 4.21. Core architecture changes
  include:

   - Syscall tables & definitions for unistd.h are now generated by
     scripts, providing greater consistency with other architectures &
     making it easier to add new syscalls.

   - Support for building kernels with no floating point support, upon
     which any userland attempting to use floating point instructions
     will receive a SIGILL. Mostly useful to shrink the kernel & as
     preparation for nanoMIPS support which does not yet include FP.

   - MIPS SIMD Architecture (MSA) vector register context is now exposed
     by ptrace via a new NT_MIPS_MSA regset.

   - ASIDs are now stored as 64b values even for MIPS32 kernels,
     expanding the ASID version field sufficiently that we don't need to
     worry about overflow & avoiding rare issues with reused ASIDs that
     have been observed in the wild.

   - The branch delay slot "emulation" page is now mapped without write
     permission for the user, preventing its use as a nice location for
     attacks to execute malicious code from.

   - Support for ioremap_prot(), primarily to allow gdb or other ptrace
     users the ability to view their tracee's memory using the same
     cache coherency attribute.

   - Optimizations to more cpu_has_* macros, allowing more to be
     compile-time constant where possible.

   - Enable building the whole kernel with UBSAN instrumentation.

   - Enable building the kernel with link-time dead code & data
     elimination.

  Platform specific changes include:

   - The Boston board gains a workaround for DMA prefetching issues with
     the EG20T Platform Controller Hub that it uses.

   - Cleanups to Cavium Octeon code removing about 20k lines of
     redundant code, mostly unused or duplicate register definitions in
     headers.

   - defconfig updates for the DECstation machines, including new
     defconfigs for r4k & 64b machines.

   - Further work on Loongson 3 support.

   - DMA fixes for SiByte machines"

* tag 'mips_4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (95 commits)
  MIPS: math-emu: Write-protect delay slot emulation pages
  MIPS: Remove struct mm_context_t fp_mode_switching field
  mips: generate uapi header and system call table files
  mips: add system call table generation support
  mips: remove syscall table entries
  mips: add +1 to __NR_syscalls in uapi header
  mips: rename scall64-64.S to scall64-n64.S
  mips: remove unused macros
  mips: add __NR_syscalls along with __NR_Linux_syscalls
  MIPS: Expand MIPS32 ASIDs to 64 bits
  MIPS: OCTEON: delete redundant register definitions
  MIPS: OCTEON: cvmx_gmxx_inf_mode: use oldest forward compatible definition
  MIPS: OCTEON: cvmx_mio_fus_dat3: use oldest forward compatible definition
  MIPS: OCTEON: cvmx_pko_mem_debug8: use oldest forward compatible definition
  MIPS: OCTEON: octeon-usb: use common gpio_bit definition
  MIPS: OCTEON: enable all OCTEON drivers in defconfig
  mips: annotate implicit fall throughs
  MIPS: Hardcode cpu_has_mips* where target ISA allows
  MIPS: MT: Remove norps command line parameter
  MIPS: Only include mmzone.h when CONFIG_NEED_MULTIPLE_NODES=y
  ...
 2018-12-26 10:45:33 -08:00
Linus Torvalds
5694cecdb0 arm64 festive updates for 4.21 
In the end, we ended up with quite a lot more than I expected:
 
 - Support for ARMv8.3 Pointer Authentication in userspace (CRIU and
   kernel-side support to come later)
 
 - Support for per-thread stack canaries, pending an update to GCC that
   is currently undergoing review
 
 - Support for kexec_file_load(), which permits secure boot of a kexec
   payload but also happens to improve the performance of kexec
   dramatically because we can avoid the sucky purgatory code from
   userspace. Kdump will come later (requires updates to libfdt).
 
 - Optimisation of our dynamic CPU feature framework, so that all
   detected features are enabled via a single stop_machine() invocation
 
 - KPTI whitelisting of Cortex-A CPUs unaffected by Meltdown, so that
   they can benefit from global TLB entries when KASLR is not in use
 
 - 52-bit virtual addressing for userspace (kernel remains 48-bit)
 
 - Patch in LSE atomics for per-cpu atomic operations
 
 - Custom preempt.h implementation to avoid unconditional calls to
   preempt_schedule() from preempt_enable()
 
 - Support for the new 'SB' Speculation Barrier instruction
 
 - Vectorised implementation of XOR checksumming and CRC32 optimisations
 
 - Workaround for Cortex-A76 erratum #1165522
 
 - Improved compatibility with Clang/LLD
 
 - Support for TX2 system PMUS for profiling the L3 cache and DMC
 
 - Reflect read-only permissions in the linear map by default
 
 - Ensure MMIO reads are ordered with subsequent calls to Xdelay()
 
 - Initial support for memory hotplug
 
 - Tweak the threshold when we invalidate the TLB by-ASID, so that
   mremap() performance is improved for ranges spanning multiple PMDs.
 
 - Minor refactoring and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJcE4TmAAoJELescNyEwWM0Nr0H/iaU7/wQSzHyNXtZoImyKTul
 Blu2ga4/EqUrTU7AVVfmkl/3NBILWlgQVpY6tH6EfXQuvnxqD7CizbHyLdyO+z0S
 B5PsFUH2GLMNAi48AUNqGqkgb2knFbg+T+9IimijDBkKg1G/KhQnRg6bXX32mLJv
 Une8oshUPBVJMsHN1AcQknzKariuoE3u0SgJ+eOZ9yA2ZwKxP4yy1SkDt3xQrtI0
 lojeRjxcyjTP1oGRNZC+BWUtGOT35p7y6cGTnBd/4TlqBGz5wVAJUcdoxnZ6JYVR
 O8+ob9zU+4I0+SKt80s7pTLqQiL9rxkKZ5joWK1pr1g9e0s5N5yoETXKFHgJYP8=
 =sYdt
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 festive updates from Will Deacon:
 "In the end, we ended up with quite a lot more than I expected:

   - Support for ARMv8.3 Pointer Authentication in userspace (CRIU and
     kernel-side support to come later)

   - Support for per-thread stack canaries, pending an update to GCC
     that is currently undergoing review

   - Support for kexec_file_load(), which permits secure boot of a kexec
     payload but also happens to improve the performance of kexec
     dramatically because we can avoid the sucky purgatory code from
     userspace. Kdump will come later (requires updates to libfdt).

   - Optimisation of our dynamic CPU feature framework, so that all
     detected features are enabled via a single stop_machine()
     invocation

   - KPTI whitelisting of Cortex-A CPUs unaffected by Meltdown, so that
     they can benefit from global TLB entries when KASLR is not in use

   - 52-bit virtual addressing for userspace (kernel remains 48-bit)

   - Patch in LSE atomics for per-cpu atomic operations

   - Custom preempt.h implementation to avoid unconditional calls to
     preempt_schedule() from preempt_enable()

   - Support for the new 'SB' Speculation Barrier instruction

   - Vectorised implementation of XOR checksumming and CRC32
     optimisations

   - Workaround for Cortex-A76 erratum #1165522

   - Improved compatibility with Clang/LLD

   - Support for TX2 system PMUS for profiling the L3 cache and DMC

   - Reflect read-only permissions in the linear map by default

   - Ensure MMIO reads are ordered with subsequent calls to Xdelay()

   - Initial support for memory hotplug

   - Tweak the threshold when we invalidate the TLB by-ASID, so that
     mremap() performance is improved for ranges spanning multiple PMDs.

   - Minor refactoring and cleanups"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (125 commits)
  arm64: kaslr: print PHYS_OFFSET in dump_kernel_offset()
  arm64: sysreg: Use _BITUL() when defining register bits
  arm64: cpufeature: Rework ptr auth hwcaps using multi_entry_cap_matches
  arm64: cpufeature: Reduce number of pointer auth CPU caps from 6 to 4
  arm64: docs: document pointer authentication
  arm64: ptr auth: Move per-thread keys from thread_info to thread_struct
  arm64: enable pointer authentication
  arm64: add prctl control for resetting ptrauth keys
  arm64: perf: strip PAC when unwinding userspace
  arm64: expose user PAC bit positions via ptrace
  arm64: add basic pointer authentication support
  arm64/cpufeature: detect pointer authentication
  arm64: Don't trap host pointer auth use to EL2
  arm64/kvm: hide ptrauth from guests
  arm64/kvm: consistently handle host HCR_EL2 flags
  arm64: add pointer authentication register bits
  arm64: add comments about EC exception levels
  arm64: perf: Treat EXCLUDE_EL* bit definitions as unsigned
  arm64: kpti: Whitelist Cortex-A CPUs that don't implement the CSV3 field
  arm64: enable per-task stack canaries
  ...
 2018-12-25 17:41:56 -08:00
Linus Torvalds
13e1ad2be3 Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull x86 pti updates from Thomas Gleixner:
 "No point in speculating what's in this parcel:

   - Drop the swap storage limit when L1TF is disabled so the full space
     is available

   - Add support for the new AMD STIBP always on mitigation mode

   - Fix a bunch of STIPB typos"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation: Add support for STIBP always-on preferred mode
  x86/speculation/l1tf: Drop the swap storage limit restriction when l1tf=off
  x86/speculation: Change misspelled STIPB to STIBP
 2018-12-25 16:26:42 -08:00
Linus Torvalds
9f687dddc4 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull timer updates from Thomas Gleixner:
 "The timer department delivers the following christmas presents:

  Core code:

   - Use proper seqcount initializer to make lockdep happy

   - SPDX annotations and cleanup of license boilerplates

   - Use DEFINE_SHOW_ATTRIBUTE() instead of open coding it

   - Minor cleanups

  Driver code:

   - Add the sched_clock for the arc timer (Alexey Brodkin)

   - Change the file timer names for riscv, rockchip, tegra20, sun4i and
     meson6 (Daniel Lezcano)

   - Add the DT bindings for r8a7796, r8a77470 and r8a774a1 (Biju Das)

   - Remove the early platform driver registration for timer-ti-dm
     (Bartosz Golaszewski)

   - Provide the sched_clock for the riscv timer (Anup Patel)

   - Add support for ARM64 for the imx-gpt and convert the imx-tpm to
     the timer-of API (Anson Huang)

   - Remove useless irq protection for the imx-gpt (Clément Péron)

   - Remove a duplicate function name for the vt8500 (Dan Carpenter)

   - Remove obsolete inclusion of <asm/smp_twd.h> for the tegra20 (Geert
     Uytterhoeven)

   - Demote the prcmu and the custom sched_clock for the dbx500 and the
     ux500 (Linus Walleij)

   - Add a new timer clock for the RDA8810PL (Manivannan Sadhasivam)

   - Rename the macro to stick to the register name and add the delay
     timer (Martin Blumenstingl)

   - Switch the bcm2835 to the SPDX identifier (Stefan Wahren)

   - Fix the interrupt register access on the fttmr010 (Tao Ren)

   - Add missing of_node_put in the initialization path on the
     integrator-ap (Yangtao Li)"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  dt-bindings: timer: Document RDA8810PL SoC timer
  clocksource/drivers/rda: Add clock driver for RDA8810PL SoC
  clocksource/drivers/meson6: Change name meson6_timer timer-meson6
  clocksource/drivers/sun4i: Change name sun4i_timer to timer-sun4i
  clocksource/drivers/tegra20: Change name tegra20_timer to timer-tegra20
  clocksource/drivers/rockchip: Change name rockchip_timer to timer-rockchip
  clocksource/drivers/riscv: Change name riscv_timer to timer-riscv
  clocksource/drivers/riscv_timer: Provide the sched_clock
  clocksource/drivers/timer-imx-tpm: Specify clock name for timer-of
  clocksource/drivers/fttmr010: Fix invalid interrupt register access
  clocksource/drivers/integrator-ap: Add missing of_node_put()
  clocksource/drivers/bcm2835: Switch to SPDX identifier
  dt-bindings: timer: renesas, cmt: Document r8a774a1 CMT support
  clocksource/drivers/timer-imx-tpm: Convert the driver to timer-of
  clocksource/drivers/arc_timer: Utilize generic sched_clock
  dt-bindings: timer: renesas, cmt: Document r8a77470 CMT support
  dt-bindings: timer: renesas, cmt: Document r8a7796 CMT support
  clocksource/drivers/imx-gpt: Remove unnecessary irq protection
  clocksource/drivers/imx-gpt: Add support for ARM64
  clocksource/drivers/meson6_timer: Implement the ARM delay timer
  ...
 2018-12-25 15:44:08 -08:00
Linus Torvalds
e4b99d415c Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull irq updates from Thomas Gleixner:
 "The interrupt department provides:

  Core updates:

   - Better spreading to NUMA nodes in the affinity management

   - Support for more than one set of interrupts to spread out to allow
     separate queues for separate functionality of a single device.

   - Decouple the non queue interrupts from being managed. Those are
     usually general interrupts for error handling etc. and those should
     never be shut down. This also a preparation to utilize the
     spreading mechanism for initial spreading of non-managed interrupts
     later.

   - Make the single CPU target selection in the matrix allocator more
     balanced so interrupts won't accumulate on single CPUs in certain
     situations.

   - A large spell checking patch so we don't end up fixing single typos
     over and over.

  Driver updates:

   - A bunch of new irqchip drivers (RDA8810PL, Madera, imx-irqsteer)

   - Updates for the 8MQ, F1C100s platform drivers

   - A number of SPDX cleanups

   - A workaround for a very broken GICv3 implementation on msm8996
     which sports a botched register set.

   - A platform-msi fix to prevent memory leakage

   - Various cleanups"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  genirq/affinity: Add is_managed to struct irq_affinity_desc
  genirq/core: Introduce struct irq_affinity_desc
  genirq/affinity: Remove excess indentation
  irqchip/stm32: protect configuration registers with hwspinlock
  dt-bindings: interrupt-controller: stm32: Document hwlock properties
  irqchip: Add driver for imx-irqsteer controller
  dt-bindings/irq: Add binding for Freescale IRQSTEER multiplexer
  irqchip: Add driver for Cirrus Logic Madera codecs
  genirq: Fix various typos in comments
  irqchip/irq-imx-gpcv2: Add IRQCHIP_DECLARE for i.MX8MQ compatible
  irqchip/irq-rda-intc: Fix return value check in rda8810_intc_init()
  irqchip/irq-imx-gpcv2: Silence "fall through" warning
  irqchip/gic-v3: Add quirk for msm8996 broken registers
  irqchip/gic: Add support to device tree based quirks
  dt-bindings/gic-v3: Add msm8996 compatible string
  irqchip/sun4i: Add support for Allwinner ARMv5 F1C100s
  irqchip/sun4i: Move IC specific register offsets to struct
  irqchip/sun4i: Add a struct to hold global variables
  dt-bindings: interrupt-controller: Add suniv interrupt-controller
  irqchip: Add RDA8810PL interrupt driver
  ...
 2018-12-25 15:17:51 -08:00
Linus Torvalds
d8924c0d76 Device properties framework updates for 4.21-rc1 
- Introduce "software nodes", analogous to the DT and ACPI firmware
    nodes except that they can be created by kernel code, in order to
    complement fwnodes representing real firmware nodes when they are
    incomplete (for example missing device properties) and to supply
    the primary fwnode when the firmware lacks hardware description
    for a device completely, and replace the "property_set" struct
    fwnode_handle type with software nodes (Heikki Krogerus).
 
  - Clean up the just introduced software nodes support and fix a commet
    in the graph-handling code (Colin Ian King, Marco Felsch).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcHMUXAAoJEILEb/54YlRxqJIP/2bDrVQphjXoZWC0/BAOjAMO
 1WIaS+LI1VpvnnSxVQllfGHSI4voKiF1fcnKMui/VjCaH/BYhh98RJtCoZ72fHHt
 WlKlMhNm2nQ5XibZP1Ge9u2NDkfebgOLTHkAam/7dMwxKBzxbK1ytcuggMnL2HRY
 9wv6N/y1iLmfFABE0WEV/a3715i5MmBxC5ApIBvjK4tRv+KpYaJ7i03+4qGxpnHY
 hGvQE0b49hJkBGwVeoEPz/3HpsJ1WYBj4Oi7UyVa8A/GyWaRdwLtUVmidBua4Dah
 1eVjpjj6vreuHRwpQbMPkMecSsdon7EzsoyWklAGKPXuA5GKmvoDoLu66DORH93O
 a3h60vq5SqsVhqJhzJpN7SZLAeGdQymSW0aABpKotKIrNVZMkWTIyxvPSw3PKnF0
 3dhgv1QUktKteuCLFfuLqp+vHbPEauOul4iPwElpno6LJ1xzVaf/sNXoHPJwBOs9
 LYHUsB8G9L3Y7qvDn4RpR3zYChFE6/J53U8B4P0g+lqV1nxz28ov00VwZJihdpcz
 wzj+lF53Tzf4gMiaIdjSsrWMtx7lNcAowYsbdb8nyng555HMaW/ROzw1gv/GB5hp
 2Iaru6+J4QGbwAaLlOVeGY0TenCJUuF+tF+ufVHujceehjAisDzF+zev0VivRv26
 UwRSmhd/g1tPsoeJVhQN
 =Z3Zj
 -----END PGP SIGNATURE-----

Merge tag 'devprop-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull device properties framework updates from Rafael Wysocki:
 "This introduces 'software nodes' that are analogous to the DT and ACPI
  firmware nodes except that they can be created by drivers themselves
  and do a couple of assorted cleanups.

  Specifics:

   - Introduce "software nodes", analogous to the DT and ACPI firmware
     nodes except that they can be created by kernel code, in order to
     complement fwnodes representing real firmware nodes when they are
     incomplete (for example missing device properties) and to supply
     the primary fwnode when the firmware lacks hardware description for
     a device completely, and replace the "property_set" struct
     fwnode_handle type with software nodes (Heikki Krogerus).

   - Clean up the just introduced software nodes support and fix a
     commet in the graph-handling code (Colin Ian King, Marco Felsch)"

* tag 'devprop-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  device property: fix fwnode_graph_get_next_endpoint() documentation
  drivers: base: swnode: remove need for a temporary string for the node name
  device property: Remove struct property_set
  device property: Move device_add_properties() to swnode.c
  drivers: base: Introducing software nodes to the firmware node framework
  ACPI / glue: Add acpi_platform_notify() function
  drivers core: Prepare support for multiple platform notifications
  driver core: platform: Remove duplicated device_remove_properties() call
 2018-12-25 15:01:46 -08:00
Linus Torvalds
1fbb2dc6f0 This round is dominated by NXP's i.MX clk drivers. We gained support for two or 
three i.MX SoCs in here and that mostly means a lot of driver code and data.
 Beyond that platform, there are some new Mediatek, Amlogic, and Qualcomm clk
 drivers added in here, and then we get to the long tail of driver updates and
 non-critical fixes all around, including code for vendors such as Renesas,
 Rockchip, Nvidia, and Allwinner. Overall, the driver updates look normal.
 
 Beyond the usual driver updates we have an update to make registering OF based
 clk providers a little simpler when they're devices created as a child of a
 device backed by a node in DT. Drivers don't have to jump through hoops to
 unregister the provider upon driver removal anymore because the API does the
 right thing and uses the parent device DT node.
 
 Core:
  - Make devm_of_clk_add_hw_provider() use parent dt node if necessary
  - Various SPDX taggings
  - Mark clk_ops const when possible
 
 New Drivers:
  - NXP i.MX7ULP SoC clock support
  - NXP i.MX8QXP SoC clock support
  - NXP i.MX8MQ SoC clock support
  - NXP QorIQ T1023 SoC support
  - Qualcomm SDM845 audio subsystem clks
  - Qualcomm SDM845 GPU clck controllers
  - Qualcomm QCS404 RPM clk support
  - Mediatek MT7629 SoC clk controllers
  - Allwinner F1c100s SoC clocks
  - Allwinner H6 display engine clocks
  - Amlogic GX video clocks
  - Support for Amlogic meson8b CPU frequency scaling
  - Amlogic Meson8b CPU post-divider clocks
 
 Updates:
  - Proper suspend/resume on VersaClock5
  - Shrink code some with DEFINE_SHOW_ATTRIBUTE()
  - Register fixes for Rockchip rk3188 and rk3328
  - One new critical clock for Rockchip rk3188 and a fixed clock id (double used number)
  - New clock id for Rockchip rk3328
  - Amlogic Meson8/Meson8b video clock support
  - Amlogic got a clk-input helper and used it for the axg-audio clock driver
  - Sigma Delta modulation for the Allwinner A33 audio clocks
  - Support for CPEX (timer) clocks on various Renesas R-Car Gen3 and RZ/G2 SoCs
  - Support for SDHI HS400 clocks on early revisions of Renesas R-Car H3 and M3-W
  - Support for SDHI and USB clocks on Renesas RZ/A2
  - Support for RPC (SPI Multi I/O Bus Controller) clocks on Renesas R-Car V3M
  - Qualcomm MSM8998 GCC driver improvements (resets, drop unused clks, etc.)
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlwZeqgRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSU7qA/8C7p4EL36zkFFHhF6wh9+CiLIcTt1OKEu
 ePgTo0UP9Q94BzHy0SOZhwV6w6yqeOfTXCAYZWdV2UcNKyPDPlIMZPkxrNbH5twq
 kptjuBS1FqnnMgfusUP88bUrhQ5hUGEaKaC4iCDK7s0YI4nBfVB28G5ZMbFTSE5L
 hrIufRfZ0aQWQw6y8aGI4qDtUeg09s6cEwFw8cA+vArAJ+2hwv0zjFGMxQskNJ6N
 JubPopVCWuP+jsqMrGP48Rg4BphSQ97h4B65Uj0BNPQ4HTIMLVvXX6Pr8sRGvKiO
 IMsNQq+fS+ECmdcV7IUzSv14cX2mLCb9XWgfCnWEK67/Ny3deaurtzF0qloWnrtv
 kFSDE4df5cJkMkK2HZF8/e0/qn0FbGP6/wDSwfdhuVuJPmfdF5m552TtQuehNHey
 YNy/pIY4sCh0zCkeU212TFKvAaRLd8qVqh2nikn3Cs7ik0G5Bhv2GAqQmIGJEh6g
 f3n/WLTzVUqFksPC5KRZHu/1UIe4sz8i14AZXmxvCyH8buLSznhoniB0wwRrQdLL
 VcJ2ia4b4e4JBJg1A5b9IqfEliJBNUV0UZTakduXBnThBpXQeH0t6YesXNaPqKaM
 qJKvaQbNk0FNFsIO4GHxwrmujrf8SrHdhWuf/rh5O6mfOiXnNTzFcLZ59+nx86Bh
 3sUFruRiDx8=
 =iNvu
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This round is dominated by NXP's i.MX clk drivers. We gained support
  for two or three i.MX SoCs in here and that mostly means a lot of
  driver code and data.

  Beyond that platform, there are some new Mediatek, Amlogic, and
  Qualcomm clk drivers added in here, and then we get to the long tail
  of driver updates and non-critical fixes all around, including code
  for vendors such as Renesas, Rockchip, Nvidia, and Allwinner. Overall,
  the driver updates look normal.

  Apart from the usual driver updates we have an update to make
  registering OF based clk providers a little simpler when they're
  devices created as a child of a device backed by a node in DT. Drivers
  don't have to jump through hoops to unregister the provider upon
  driver removal anymore because the API does the right thing and uses
  the parent device DT node.

  Summary:

  Core:
   - Make devm_of_clk_add_hw_provider() use parent dt node if necessary
   - Various SPDX taggings
   - Mark clk_ops const when possible

  New Drivers:
   - NXP i.MX7ULP SoC clock support
   - NXP i.MX8QXP SoC clock support
   - NXP i.MX8MQ SoC clock support
   - NXP QorIQ T1023 SoC support
   - Qualcomm SDM845 audio subsystem clks
   - Qualcomm SDM845 GPU clck controllers
   - Qualcomm QCS404 RPM clk support
   - Mediatek MT7629 SoC clk controllers
   - Allwinner F1c100s SoC clocks
   - Allwinner H6 display engine clocks
   - Amlogic GX video clocks
   - Support for Amlogic meson8b CPU frequency scaling
   - Amlogic Meson8b CPU post-divider clocks

  Updates:
   - Proper suspend/resume on VersaClock5
   - Shrink code some with DEFINE_SHOW_ATTRIBUTE()
   - Register fixes for Rockchip rk3188 and rk3328
   - One new critical clock for Rockchip rk3188 and a fixed clock id
     (double used number)
   - New clock id for Rockchip rk3328
   - Amlogic Meson8/Meson8b video clock support
   - Amlogic got a clk-input helper and used it for the axg-audio clock
     driver
   - Sigma Delta modulation for the Allwinner A33 audio clocks
   - Support for CPEX (timer) clocks on various Renesas R-Car Gen3 and
     RZ/G2 SoCs
   - Support for SDHI HS400 clocks on early revisions of Renesas R-Car
     H3 and M3-W
   - Support for SDHI and USB clocks on Renesas RZ/A2
   - Support for RPC (SPI Multi I/O Bus Controller) clocks on Renesas
     R-Car V3M
   - Qualcomm MSM8998 GCC driver improvements (resets, drop unused clks,
     etc)"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (172 commits)
  clk: imx: imx7ulp: add arm hsrun mode clocks support
  dt-bindings: clock: imx7ulp: add HSRUN mode related clocks
  clk: Use of_node_name_eq for node name comparisons
  clk: vc5: Add suspend/resume support
  clk: qcom: Drop unused 8998 clock
  clk: qcom: Leave mmss noc on for 8998
  clk: tegra: Return the exact clock rate from clk_round_rate
  clk: tegra30: Use Tegra CPU powergate helper function
  soc/tegra: pmc: Drop SMP dependency from CPU APIs
  clk: tegra: Fix maximum audio sync clock for Tegra124/210
  clk: tegra: get rid of duplicate defines
  clk: imx: add imx8qxp lpcg driver
  clk: imx: add lpcg clock support
  clk: imx: add imx8qxp clk driver
  clk: imx: Make the i.MX8MQ CCM clock driver CLK_IMX8MQ dependant
  clk: imx: add scu clock common part
  clk: imx: add configuration option for mmio clks
  dt-bindings: clock: add imx8qxp lpcg clock binding
  dt-bindings: clock: imx8qxp: add SCU clock IDs
  clk: qcom: Add missing msm8998 resets
  ...
 2018-12-25 14:57:37 -08:00
Linus Torvalds
0051db8218 spi: Updates for v4.21 
The main thing this release has been a lot of work on the integration
 with SPI NOR flashes, there's been some specific support for a while for
 controller features designed to make them perform better but it's not
 worked out as well as hoped so the interface has been redesigned in a
 way that will hopefully do better - it's already been adopted by a
 number of additional controllers so things are looking good.  Otherwise
 most of the work has been driver specific:
 
  - Support for better integration with NOR flashes from Boris Brezillon
    and Yogesh Narayan Gaur plus usage of it in several drivers.
  - A big cleanup of the Rockchip driver from Emil Renner Berthing.
  - Lots of performance improvements for bcm2835 from Lukas Wunner.
  - Slave mode support for pxa2xx from Lubomir Rintel.
  - Support for Macronix MXIC, Mediatek MT7629 and MT8183, NPCM PSPI,
    and Renesas r8a77470.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlwhLBsTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0AGvB/9odNqLjVJiG6v0EIKqLyYXMzCYgmrZ
 RyBZoqTKoNmXxv0b/Fdsi8VaiJ8x2WIcqLzhpQlg3twOCvXQbgoA+JzQNyHZlZ1u
 8cxfFGebVS6r0k14bkmAVR8LSvGlReOZQLC2MvccVc/UAwN0/p5ncN0xUADHvIOW
 /Pmx0/e2uCMx1+OMAudlUXQ5IIbnb5/OjvDfR/7tlVo5YKSgkHBJeunOYSaPSNuO
 QNf9+kZxvQ8djYbpYqqHWovPF7JSlQAj0WkMJPB/g3R09E/vatSBlCMnETBJWn/L
 wogHquLK/vwRaS+MqTSrGsi0ylpqgxmZrbGKcXKF51fim0EvBg7cMqe6
 =ZnI3
 -----END PGP SIGNATURE-----

Merge tag 'spi-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "The main thing this release has been a lot of work on the integration
  with SPI NOR flashes, there's been some specific support for a while
  for controller features designed to make them perform better but it's
  not worked out as well as hoped so the interface has been redesigned
  in a way that will hopefully do better - it's already been adopted by
  a number of additional controllers so things are looking good.

  Otherwise most of the work has been driver specific:

   - Support for better integration with NOR flashes from Boris
     Brezillon and Yogesh Narayan Gaur plus usage of it in several
     drivers.

   - A big cleanup of the Rockchip driver from Emil Renner Berthing.

   - Lots of performance improvements for bcm2835 from Lukas Wunner.

   - Slave mode support for pxa2xx from Lubomir Rintel.

   - Support for Macronix MXIC, Mediatek MT7629 and MT8183, NPCM PSPI,
     and Renesas r8a77470"

* tag 'spi-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (90 commits)
  spi: sh-msiof: Reduce the number of times write to and perform the transmission from FIFO
  spi: sh-msiof: Add r8a774c0 support
  doc: lpspi: Document DT bindings for LPSPI slave mode
  spi: lpspi: Let watermark change with send data length
  spi: lpspi: Add slave mode support
  spi: lpspi: Replace all "master" with "controller"
  spi: imx: drop useless member speed_hz from driver data struct
  spi: imx: rename config callback and add useful parameters
  spi: imx: style fixes
  spi: imx: mx51-ecspi: Move some initialisation to prepare_message hook.
  spi: imx: add a device specific prepare_message callback
  mtd: atmel-quadspi: disallow building on ebsa110
  spi: Update NPCM PSPI controller documentation
  spi: npcm: Modify pspi send function
  spi: Use of_node_name_eq for node name comparisons
  spi: dw-mmio: add ACPI support
  spi: bcm2835: Synchronize with callback on DMA termination
  spi: bcm2835: Speed up FIFO access if fill level is known
  spi: bcm2835: Polish transfer of DMA prologue
  spi: spi-mem: add support for octal mode I/O data transfer
  ...
 2018-12-25 14:43:54 -08:00
Linus Torvalds
79f20778fb regulator: Updates for v4.20 
This has been a very busy release for the core, some fixes, one large new
 feature and a big bit of refactoring to update the GPIO API:
 
  - Support for coupled regulators from Dmitry Osipenko based on a prior
    attempt by Maciej Purski, allowing us to handle situations where the
    voltages on two regulators can't be too far apart from each other.
  - Conversion of the GPIO support in both drivers and the core to use
    GPIO descriptors rather than numbers, part of the overall project to
    remove GPIO numbers.
  - Support for standby mode suspend states from Andrei Stefanescu.
  - New drivers for Allwinner AXP209, Cirrus Logic Lochnagar and
    Microchip MPC16502.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlwhKkcTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0DFfB/91/ECmybKTP+RvwUTZ0rrqFFs2C9Vl
 76vH242exyJuzv44inWi9gOcXFDn7c9hf7Vl4Jd5UVP53Nzm5I8ZwExQsxax9BsN
 hltlX01UpRAmHNkMNrnJH6YAntD3EicYGSUDjohkWItIDqpMAjhWpx/yGXTEjBir
 gvkV51bF3qAYQe0g6MmK3KeVw96QPNjUhoPbsqbpaXaF6fmyOVzMiFrffJGmUAyM
 J5qRv3OhsZiZy2/zxNLkUI6y4XKDEaFJ3RhSKoUwItGyKQt2saXMoJGyEEWm2b6X
 coTm0ZQk+EU+b659lDHErTM4YUx7p7tQt3VM09NoMD8B261TdZ0y99Oh
 =8Rxt
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "This has been a very busy release for the core, some fixes, one large
  new feature and a big bit of refactoring to update the GPIO API:

   - Support for coupled regulators from Dmitry Osipenko based on a
     prior attempt by Maciej Purski, allowing us to handle situations
     where the voltages on two regulators can't be too far apart from
     each other.

   - Conversion of the GPIO support in both drivers and the core to use
     GPIO descriptors rather than numbers, part of the overall project
     to remove GPIO numbers.

   - Support for standby mode suspend states from Andrei Stefanescu.

   - New drivers for Allwinner AXP209, Cirrus Logic Lochnagar and
     Microchip MPC16502"

* tag 'regulator-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (90 commits)
  regulator: tps65910: fix a missing check of return value
  regulator: mcp16502: Select REGMAP_I2C to fix build error
  regulator: convert to DEFINE_SHOW_ATTRIBUTE
  regulator: mcp16502: Fix missing n_voltages setting
  regulator: mcp16502: Use #ifdef CONFIG_PM_SLEEP around mcp16502_suspend/resume_noirq
  regulator: mcp16502: code cleanup
  regulator: act8945a-regulator: make symbol act8945a_pm static
  drivers/regulator: fix a missing check of return value
  regulator: act8945a-regulator: fix 'defined but not used' compiler warning
  regulator: axp20x: fix set_ramp_delay for AXP209/dcdc2
  regulator: mcp16502: add support for suspend
  mfd: axp20x: use explicit bit defines
  mfd: axp20x: Clean up included headers
  regulator: dts: enable soft-start and ramp delay for the OLinuXino Lime2
  dt-bindings: mfd: axp20x: Add software based soft_start for AXP209 LDO3
  regulator: axp20x: add software based soft_start for AXP209 LDO3
  dt-bindings: mfd: axp20x: add support for regulator-ramp-delay for AXP209
  regulator: axp20x: add support for set_ramp_delay for AXP209
  mfd: axp20x: name voltage ramping define properly
  regulator: mcp16502: add regulator driver for MCP16502
  ...
 2018-12-25 14:38:31 -08:00
Linus Torvalds
d923fd6dc1 pwm: Changes for v4.21-rc1 
Not a lot going on this cycle. There's some more cleanup going on and
 new driver support that was not quite ready in time for v4.21-rc1, but
 here are a few fixes and improvements that are good to go. The Kona PWM
 driver can now be built on the Cygnus architecture and the i.MX driver
 gained support for hardware readback. Some small fixes are provided for
 the clks711x and lpc18xx-sct drivers. Finally, to round things off some
 drivers are switched to SPDX license identifiers.
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlwgvusZHHRoaWVycnku
 cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zobXWEACgOF26QUs/Vt6n7r7XRXeL
 rHZwhJ44+0/wHm6MNJcj8jy7Ct0iJVBhxyK4680A0n2u1T6SxA0YZu2yVC46iNFc
 52bipsZ3U8uuKHBvWhGxmYXknj1nJqKPg2yAxyJ4dD6LlJaGYJKaxZe4BH/gZ4qI
 WaYH88rcopfcVcrzl57IPoibiEwfN1V2WAvGkKihj1y1KN65mbUHgRFAqAA2s0u/
 qdpGpqIrBEHeOZSoKuNDEADkO5xiHpO+uEcxY2xeWg0onP/X+tVHerkG28+ruwP/
 PWXI3uEe9SAeEzf3YKNqCNWLLRVQ/+JU6oS6qwMjhgV5w+HppIMIUJUo1hddofL0
 RvTZ3IhTpGXGCYpp1OuF51ZWZpTb56VZ4roHt20bjaYLqA6SEu0AszxELVvOYO+B
 kBVMwohtNYeZpuM2eGOdvZAMG55cicRa55MZzpCDMNfJZSr0CrVwnX6o5MKTuozA
 B21wxm9PPR/miPBmGnFegXmuqB+Uf/uWqXeGfWwwdlfS4dchOb8pBxDoO5P53Dx6
 xOnfWQu0Ol1sUVLXg9l0rEJAHx1F3SncrE4WWnV+pK1NkMoz9+Ry5aVqIBOFI+Qw
 ImEssuM52sv93S9HXuNq6DOUwoOSwkE4HSjPneKmAA1XMQ846YB/zj2R0Ki+dZAK
 Zlk9HVwIOKpP0gG0tcPBOA==
 =ni7n
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "Not a lot going on this cycle.

  There's some more cleanup going on and new driver support that was not
  quite ready in time for v4.21-rc1, but here are a few fixes and
  improvements that are good to go.

  The Kona PWM driver can now be built on the Cygnus architecture and
  the i.MX driver gained support for hardware readback. Some small fixes
  are provided for the clks711x and lpc18xx-sct drivers.

  Finally, to round things off some drivers are switched to SPDX license
  identifiers"

* tag 'pwm/for-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  dt-bindings: pwm: rcar: Add r8a774c0 support
  pwm: imx: Add ipg clock operation
  pwm: clps711x: Switch to SPDX identifier
  pwm: clps711x: Fix period calculation
  pwm: bcm2835: Switch to SPDX identifier
  pwm: Enable Kona PWM to be built for the Cygnus architecture
  pwm: Drop legacy wrapper for changing polarity
  pwm: imx: Implement get_state() function for hardware readout
  pwm: imx: Use bitops and bitfield macros to define register values
  pwm: imx: Sort include files
  pwm: lpc18xx-sct: Don't reconfigure PWM in .request and .free
 2018-12-25 14:34:48 -08:00
Linus Torvalds
1e2af254ef Power management updates for 4.21-rc1 
- Add sysadmin documentation for cpuidle (Rafael Wysocki).
 
  - Make it possible to specify a cpuidle governor from kernel
    command line, add new cpuidle state sysfs attributes for
    governor evaluation, and improve the "polling" idle state
    handling (Rafael Wysocki).
 
  - Fix the handling of the "required-opps" DT property in the
    operating performance points (OPP) framework, improve the
    integration of it with the generic power domains (genpd)
    framework, improve the handling of performance states in
    them and clean up the idle states vs performance states
    separation in genpd (Viresh Kumar, Ulf Hansson).
 
  - Add a cpufreq driver called "qcom-hw" for Qualcomm SoCs using
    a hardware engine to control CPU frequency transitions along
    with DT bindings for it (Taniya Das).
 
  - Fix an intel_pstate driver issue related to CPU offline and
    update the documentation of it (Srinivas Pandruvada).
 
  - Clean up the imx6q cpufreq driver (Anson Huang).
 
  - Add SPDX license IDs to cpufreq schedutil governor files (Daniel
    Lezcano).
 
  - Switch over the runtime PM framework to using high-res timers
    for device autosuspend to allow the control of it to be more
    precise (Vincent Guittot).
 
  - Disable non-wakeup ACPI GPEs during suspend-to-idle so that they
    don't prevent the system from reaching the target low-power state
    and simplify the suspend-to-idle handling on ACPI platforms
    without full Low-Power S0 Idle (LPS0) support (Rafael Wysocki).
 
  - Add system-wide suspend and resume support to the devfreq
    framework (Lukasz Luba).
 
  - Clean up the SmartReflex adaptive voltage scaling (AVS) driver and
    add an SPDX license ID to it (Nishanth Menon, Uwe Kleine-König,
    Thomas Meyer).
 
  - Get rid of code duplication by using the DEFINE_SHOW_ATTRIBUTE
    macro in some places, fix some DT node refcount leaks, and do
    some other janitorial cleanups (Yangtao Li).
 
  - Update the cpupower, intel_pstate_tracer and turbosat utilities
    (Abhishek Goel, Doug Smythies, Len Brown).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcHMOKAAoJEILEb/54YlRxtHUP/i4MePJYYIab3dW2WMtFC9wP
 K3Z/qva5uiEampEZbjlATlqUrd0XxMU2YfkJ9N08rJ33bKnBi8wNp0BPiwZjYs77
 lwjuEQ0Depz85LJ7W+dOjjxucdYv/H/ZXVK7VF2sfAfbpEbD7+RNTTa1+zdoh3Yq
 AiCKH/fU+Yc+wOMcXxj8vWe8EecsuYfZUC/p/yJDv1uMaUyHTgiCAyE/S2JzvZcQ
 mGFmly8b1hSkvCPOsipq/O8HUDtve8sOyZvFO5Up5BiNbDyhEHS4tDiKipbKgc/J
 ljzP3pVATlnEZLFxyqg32PhuhwYB0MtN3+BZGTjLelqTmElTx9A2JvWBVk4jgaC9
 ps97nUz1HO2dr1ERDyMnDtZFHFp24LVQcIB2RKfj/lqSq94IWQphmNZVF219jdyd
 68wR2/fnkzTeDhJ1JvcJb5XKrrd/wq3IKfCJAd9AXVxy27BrCB0ryTsQFvXJ+AzV
 n603yf3Sb7QaIC7Mofhj2WT3N/BQnzMzZhBJRA3EeX/Gd7TkLtQuvvHZQzcGbgOY
 GGm6WKGWgEUp3YIJIz5ihUuy9SUETCvR2PqGZfo+Wmc7F77j/5FY5ejRt3llkeFn
 8KaVQH9YIRjffBr1nclXMHKaRtf/JVB9SgVmDvA6Sh3Ac5/KBy3+IgwiJ2z5dunr
 tYV/QJ22r15xEBITTSJ7
 =WhM8
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add sysadmin documentation for cpuidle, extend the cpuidle
  subsystem somewhat, improve the handling of performance states in the
  generic power domains (genpd) and operating performance points (OPP)
  frameworks, add a new cpufreq driver for Qualcomm SoCs, update some
  other cpufreq drivers, switch over the runtime PM framework to using
  high-res timers for device autosuspend, fix a problem with
  suspend-to-idle on ACPI-based platforms, add system-wide suspend and
  resume handling to the devfreq framework, do some janitorial cleanups
  all over and update some utilities.

  Specifics:

   - Add sysadmin documentation for cpuidle (Rafael Wysocki).

   - Make it possible to specify a cpuidle governor from kernel command
     line, add new cpuidle state sysfs attributes for governor
     evaluation, and improve the "polling" idle state handling (Rafael
     Wysocki).

   - Fix the handling of the "required-opps" DT property in the
     operating performance points (OPP) framework, improve the
     integration of it with the generic power domains (genpd) framework,
     improve the handling of performance states in them and clean up the
     idle states vs performance states separation in genpd (Viresh
     Kumar, Ulf Hansson).

   - Add a cpufreq driver called "qcom-hw" for Qualcomm SoCs using a
     hardware engine to control CPU frequency transitions along with DT
     bindings for it (Taniya Das).

   - Fix an intel_pstate driver issue related to CPU offline and update
     the documentation of it (Srinivas Pandruvada).

   - Clean up the imx6q cpufreq driver (Anson Huang).

   - Add SPDX license IDs to cpufreq schedutil governor files (Daniel
     Lezcano).

   - Switch over the runtime PM framework to using high-res timers for
     device autosuspend to allow the control of it to be more precise
     (Vincent Guittot).

   - Disable non-wakeup ACPI GPEs during suspend-to-idle so that they
     don't prevent the system from reaching the target low-power state
     and simplify the suspend-to-idle handling on ACPI platforms without
     full Low-Power S0 Idle (LPS0) support (Rafael Wysocki).

   - Add system-wide suspend and resume support to the devfreq framework
     (Lukasz Luba).

   - Clean up the SmartReflex adaptive voltage scaling (AVS) driver and
     add an SPDX license ID to it (Nishanth Menon, Uwe Kleine-König,
     Thomas Meyer).

   - Get rid of code duplication by using the DEFINE_SHOW_ATTRIBUTE
     macro in some places, fix some DT node refcount leaks, and do some
     other janitorial cleanups (Yangtao Li).

   - Update the cpupower, intel_pstate_tracer and turbosat utilities
     (Abhishek Goel, Doug Smythies, Len Brown)"

* tag 'pm-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
  PM / Domains: remove define_genpd_open_function() and define_genpd_debugfs_fops()
  PM-runtime: Switch autosuspend over to using hrtimers
  cpufreq: qcom-hw: Add support for QCOM cpufreq HW driver
  dt-bindings: cpufreq: Introduce QCOM cpufreq firmware bindings
  ACPI: PM: Loop in full LPS0 mode only
  ACPI: EC / PM: Disable non-wakeup GPEs for suspend-to-idle
  tools/power/x86/intel_pstate_tracer: Fix non root execution for post processing a trace file
  tools/power turbostat: consolidate duplicate model numbers
  tools/power turbostat: fix goldmont C-state limit decoding
  PM / Domains: Propagate performance state updates
  PM / Domains: Factorize dev_pm_genpd_set_performance_state()
  PM / Domains: Save OPP table pointer in genpd
  OPP: Don't return 0 on error from of_get_required_opp_performance_state()
  OPP: Add dev_pm_opp_xlate_performance_state() helper
  OPP: Improve _find_table_of_opp_np()
  PM / Domains: Make genpd performance states orthogonal to the idlestates
  PM / sleep: convert to DEFINE_SHOW_ATTRIBUTE
  cpuidle: Add 'above' and 'below' idle state metrics
  PM / AVS: SmartReflex: Switch to SPDX Licence ID
  PM / AVS: SmartReflex: NULL check before some freeing functions is not needed
  ...
 2018-12-25 13:47:41 -08:00
Linus Torvalds
b271b2127e - Support for ZynqMP DDR controller support to synopsys_edac along 
with a driver cleanup and generalization for the addition of support for
 the new IP. (Manish Narani)
 
 - Removal of the /sys/bus/edac devices hierarchy. This enabled us to get
 rid of the silly memory controllers maximum number notion. (Tony Luck
 and Borislav Petkov)
 
 - skx_edac improvements and fixes. (Qiuxu Zhuo and Tony Luck)
 
 - The usual garden variety of small cleanups and fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAlwb8+AACgkQEsHwGGHe
 VUrG5A//a/x5hWrRROEyO9rPlsBgGWfC+B4AhzPv4aq6CrOHLmiAJ5wQbRqsU1qE
 lrlxI+SAxSJXLba2AMTSGdOBdmscL10rs97iqdVzpZ2bFjAVzxOZ0wJNlrPZqvRP
 /MMJbOxaHSOfS20VZCADT2ebk64gmPWroLCR3pj4ZPMCVWVinN23McgIN2EB901z
 HA3yi41cNHbV12/qrbauMRVTfc59oymPe1fhgeygaeHutTKbckSy/vUmxkX5fsO/
 9mTeB//kbqOrOO6TEGb1wwPC3kd0mJPiC2FGWO9Ty2w5EiDFuX1uZeJJf9dDayc4
 C/fu/YG/wy+x9OzbJD/LLFitrnaW04OUUx2551dJY2EMJ6+Tj7krcKIJyXei4PP4
 j/8jX99z0EiitbkwG1yh0QuZi7wh4FD3yl7h2BFDmwCuq+x5MczmXEkWJb4jrfB6
 G2xS20VmklQQb8QxA5gjl2toj0nb2ulfCHgQcUK5fgHS1dwS5W/gAUNiKeQmngny
 lAcWh3dJJLEmH+N/edp0eC+aLBgKB2juA43bwOw9isL1wbV3RtSF+EZRgm/IjHVA
 rBnDoIMAi/YCFXgYqhmH2M+gEh8RIKQatpZEc0RaW8EpPNCVRFvZECUFy3bkpXbj
 58Nzo+JQvXJVFOWhGW5337DJ+FEi6FWefmYMYNaA4zvUZbigiWk=
 =AyeO
 -----END PGP SIGNATURE-----

Merge tag 'edac_for_4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:

 - Support for ZynqMP DDR controller support to synopsys_edac along with
   a driver cleanup and generalization for the addition of support for
   the new IP. (Manish Narani)

 - Removal of the /sys/bus/edac devices hierarchy. This enabled us to
   get rid of the silly memory controllers maximum number notion. (Tony
   Luck and Borislav Petkov)

 - skx_edac improvements and fixes. (Qiuxu Zhuo and Tony Luck)

 - The usual garden variety of small cleanups and fixes.

* tag 'edac_for_4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (25 commits)
  EDAC, fsl_ddr: Add LS1021A to the list of supported hardware
  EDAC, i5000: Remove set but not used local variables
  MAINTAINERS, EDAC: Drop bouncing email
  EDAC, i82975x: Fix spelling mistake "reserverd" -> "reserved"
  EDAC, fsl: Move error injection under CONFIG_EDAC_DEBUG
  EDAC, skx: Let EDAC core show the decoded result for debugfs
  EDAC, skx: Move debugfs node under EDAC's hierarchy
  EDAC, skx: Prepend hex formatting with '0x'
  EDAC, skx: Fix function calling order in skx_exit()
  EDAC: Drop per-memory controller buses
  EDAC: Don't add devices under /sys/bus/edac
  EDAC: Fix indentation issues in several EDAC drivers
  EDAC, skx: Fix randconfig builds in a better way
  EDAC, i82975x: Remove set but not used variable dtype
  EDAC, qcom_edac: Remove irq_handled local variable
  EDAC, synopsys: Add Error Injection support for ZynqMP DDR controller
  EDAC, synopsys: Add ECC support for ZynqMP DDR controller
  EDAC, synopsys: Add macro defines for ZynqMP DDRC
  dt: bindings: Document ZynqMP DDRC in Synopsys documentation
  EDAC, synopsys: Add error handling for the of_device_get_match_data() result
  ...
 2018-12-25 13:28:00 -08:00
Linus Torvalds
8e61e7b5c4 sound updates for 4.21 
There are no intensive changes in both ALSA and ASoC core parts while
 rather most of changes are a bunch of driver fixes and updates.
 A large diff pattern appears in ASoC TI part which now merges both
 OMAP and DaVinci stuff, but the rest spreads allover the places.
 
 Note that this pull request includes also some updates for LED trigger
 and platform drivers for mute LEDs, appearing in the diffstat as well.
 
 Some highlights:
 
 ASoC:
 - Preparatory work for merging the audio-graph and audio-graph-scu
   cards
 - A merge of TI OMAP and DaVinci directories, as both product lines
   get merged together.  Also including a few architecture changes as
   well.
 - Major cleanups of the Maxim MAX9867 driver
 - Small fixes for tablets & co with Intel BYT/CHT chips
 - Lots of rsnd updates as usual
 - Support for Asahi Kaesi AKM4118, AMD ACP3x, Intel platforms with
   RT5660, Meson AXG S/PDIF inputs, several Qualcomm IPs and Xilinx I2S
   controllers
 
 HD-audio:
 - Introduce audio-mute LED trigger for replacing the former hackish
   dynamic binding
 - Huawei WMI hotkey and mute LED support
 - Refactoring of PM code and display power controls
 - Headset button support in the generic jack code
 - A few updates for Tegra
 - Fixups for HP EliteBook and ASUS UX391UA
 - Lots of updates for Intel ASoC HD-audio, including the improved DSP
   detection and the fallback binding from ASoC SST to legacy HD-audio
   controller drivers
 
 Others:
 - Updates for FireWire TASCAM and Fireface devices, some other fixes
 - A few potential Spectre v1 fixes that are all trivial
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAlwbbCIOHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE+RoQ//TNKliUP3bOv4BdnSmUHcCSAP3st96Ror5lC+
 RZ103UyjlCsfa7hSPfH7/4WHAjk7wXYdazjA3m2swsxsbcjPMW4uBIBJlegQNM/9
 PmNt4y60UgdgMCT/uu10BlEO8GsqBkRpxFYHtUJ3Lq6h9ECa+VDLazNjK9jABItK
 BVG668/LZp0le94cnJsLICmZ7fwKpAvi58hOsgOJLrPP4gzSGTj1gJXw/yyZ99QC
 MPLVj1PruXq1l8zfxM+MUuOa7hayafx64bCbftlITPonWfEr7OvBCQ7Vf9HqzJIJ
 OzEXAclVSc89R7RQT2omPiRKC7AyL85M9PCkpTtXh2D7DGXw9CFj5IDL6eIC4Ip4
 sycArLOo6LA8ZYu45zCiY3rfh9Hx0Zn2qHz3qJeQtBrv5XYULuf6ZNwq6xJDEUz/
 jxS558wSGHYWAyjv/IaPha1+JD6Us7zkSQgum+/qqnYYnYlDyxXnBatj4HzWZP/M
 Khuhj+k+Y8UXK1MbRiekVCGIwCHGf3cUv4H7tq+qpEzvJZwTFnOBh7/twVL8gN96
 x4ozZogaiaenZwlEZlkzowAMBBYMYb537Y+Y5suxzWGz3HN/Z8raaL8GTkIIB/BO
 bNprJtPR8GJLfdu8NE++dUR2VuHfMnWat+frXk0eAsWutoviRyB4JLCRppfpgrA/
 vDhIreU=
 =SG61
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "There are no intensive changes in both ALSA and ASoC core parts while
  rather most of changes are a bunch of driver fixes and updates. A
  large diff pattern appears in ASoC TI part which now merges both OMAP
  and DaVinci stuff, but the rest spreads allover the places.

  Note that this pull request includes also some updates for LED trigger
  and platform drivers for mute LEDs, appearing in the diffstat as well.

  Some highlights:

  ASoC:
   - Preparatory work for merging the audio-graph and audio-graph-scu
     cards
   - A merge of TI OMAP and DaVinci directories, as both product lines
     get merged together. Also including a few architecture changes as
     well.
   - Major cleanups of the Maxim MAX9867 driver
   - Small fixes for tablets & co with Intel BYT/CHT chips
   - Lots of rsnd updates as usual
   - Support for Asahi Kaesi AKM4118, AMD ACP3x, Intel platforms with
     RT5660, Meson AXG S/PDIF inputs, several Qualcomm IPs and Xilinx
     I2S controllers

  HD-audio:
   - Introduce audio-mute LED trigger for replacing the former hackish
     dynamic binding
   - Huawei WMI hotkey and mute LED support
   - Refactoring of PM code and display power controls
   - Headset button support in the generic jack code
   - A few updates for Tegra
   - Fixups for HP EliteBook and ASUS UX391UA
   - Lots of updates for Intel ASoC HD-audio, including the improved DSP
     detection and the fallback binding from ASoC SST to legacy HD-audio
     controller drivers

  Others:
   - Updates for FireWire TASCAM and Fireface devices, some other fixes
   - A few potential Spectre v1 fixes that are all trivial"

* tag 'sound-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits)
  ALSA: HD-Audio: SKL+: force HDaudio legacy or SKL+ driver selection
  ALSA: HD-Audio: SKL+: abort probe if DSP is present and Skylake driver selected
  ALSA: HDA: export process_unsol_events()
  ALSA: hda/realtek: Enable audio jacks of ASUS UX391UA with ALC294
  ALSA: bebob: fix model-id of unit for Apogee Ensemble
  ALSA: emu10k1: Fix potential Spectre v1 vulnerabilities
  ALSA: rme9652: Fix potential Spectre v1 vulnerability
  ASoC: ti: Kconfig: Remove the deprecated options
  ARM: davinci_all_defconfig: Update the audio options
  ARM: omap1_defconfig: Do not select ASoC by default
  ARM: omap2plus_defconfig: Update the audio options
  ARM: davinci: dm365-evm: Update for the new ASoC Kcofnig options
  ARM: OMAP2: Update for new MCBSP Kconfig option
  ARM: OMAP1: Makefile: Update for new MCBSP Kconfig option
  MAINTAINERS: Add entry for sound/soc/ti and update the OMAP audio support
  ASoC: ti: Merge davinci and omap directories
  ALSA: hda: add mute LED support for HP EliteBook 840 G4
  ALSA: fireface: code refactoring to handle model-specific registers
  ALSA: fireface: add support for packet streaming on Fireface 800
  ALSA: fireface: allocate isochronous resources in mode-specific implementation
  ...
 2018-12-25 13:19:10 -08:00
Linus Torvalds
996680d461 media fixes for v4.20-rc8 
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcG4weAAoJEAhfPr2O5OEVMu8P/j5a3+qringy/94NgmpHBQop
 aOACNWTRE746CG8T0yKgHV13iiLTHhlVxrRfhADKomWFit0DOiE2G1QXDsw6jptl
 gfMKMz3tE7MNOt0E+1tFzkezduJ7TIvFw9rorJ9MuACr9RGc+jMc+8muu1Uhu+fS
 JArKYrn1xlBEP9k2pcgbxFIjzdRr1jEJ9MCdyxybaU4QWyH4rUq0u+i6RJ2JlLcV
 urXGeDaNwgq7uTcOdUIwcbB0lKCi3hhkuPyl850IaQHWkR1cIzRoMWk5ilW9YYR3
 8zDix9hORmPAdRIwhj0kJElTLZlTzF/u4+1fARmwKJlOYnAfRzSyFhC5P4huvmeA
 6KXP1jg3OcyU5mB/Ys0YpZDhUtlhpRmMCMKtZW0x4BPpYTfRkAz6almUM6kIyaKp
 Dv1cp4UJ8SGpqVxEFBSr6qPsoO0by8jdkgRsupaCn6tAtkG7VXDGR8yhzZB8Leai
 pdCXP/7Z5t3kWI0XceVlpgOjkC7qLbEQKLDk0dqg0XqFLEuXm7sifLGamGhqubVy
 BmRPzH9oVISutmM/8DL8MHBkAv5IESF1lwhOzM75LTtA7aDaBuHS6zRhh45VtdJx
 r8/+R9KEvKdWTFgnRpvaERJk64I0hU44gmPLOtt/kkCfaTOonbhIsZ55uZxKjkqg
 rHPVHJORalrJGy9Hnhpl
 =uZDa
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.20-7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull more media updates from Mauro Carvalho Chehab:
 "The Intel IPU3 camera driver"

* tag 'media/v4.20-7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (23 commits)
  media: staging/ipu3-imgu: Add MAINTAINERS entry
  media: staging/ipu3-imgu: Address documentation comments
  media: v4l: Add Intel IPU3 meta buffer formats
  media: doc-rst: Add Intel IPU3 documentation
  media: ipu3-imgu: Fix firmware binary location
  media: ipu3-imgu: Fix compiler warnings
  media: staging/intel-ipu3: Add dual pipe support
  media: staging/intel-ipu3: Add Intel IPU3 meta data uAPI
  media: staging/intel-ipu3: Add imgu top level pci device driver
  media: staging/intel-ipu3: Add v4l2 driver based on media framework
  media: staging/intel-ipu3: Add css pipeline programming
  media: staging/intel-ipu3: css: Initialize css hardware
  media: staging/intel-ipu3: css: Compute and program ccs
  media: staging/intel-ipu3: css: Add static settings for image pipeline
  media: staging/intel-ipu3: css: Add support for firmware management
  media: staging/intel-ipu3: css: Add dma buff pool utility functions
  media: staging/intel-ipu3: Implement DMA mapping functions
  media: staging/intel-ipu3: mmu: Implement driver
  media: staging/intel-ipu3: abi: Add structs
  media: staging/intel-ipu3: abi: Add register definitions and enum
  ...
 2018-12-25 13:11:30 -08:00
Linus Torvalds
5813540b58 media fixes for v4.20-rc8 
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcG4K3AAoJEAhfPr2O5OEV7r4P/iRRCZ1aBbImMW+mPD5fhmhj
 FmQod3njuaVQzjBizPexEvmQ6Qz4vSr1JnpiKTPaYOlooOtT4TNAw7Hx/6SdCLkl
 a1+T0ads5FGQGMKQ/xQ+/dnp8UDdhllKYR+aVilfHpnZcltLtydtnhqYDZi98PRQ
 2XYPCX5wRIDoJ5HKb1KygpGt4wxU1Re08X0ZDokPzN5DCQ3HGzs/SPOA8WPIo4kc
 rxT3QivhsfSVPX+Bu7UrurskvZ4cOvii1sXtxMWvsanDoDfY+XUPvSBL9syU6hzF
 KFdbIJNDQDy5m87crrZmOwHygj2nzJubpbdE3m5ulDRUvc1f4FYDeqdn5GJZ8fzQ
 32+NFCboupZaJdfKWl1DtM8E6vlqiEa5/Xnkw5CEQ0mt6VmVob+YlmH8iLyxDZ7L
 c49r/k4UqbrsP/sgwi7mAbwFrNmve5ZPVBJKgcu+W1x3U8j+r3MBb2G+rFT0Mimx
 Z6IKS0KuOXIoOS71ADL+6Z6KmczvZGgMVpSaSl1IAZw/xAY8JCYqcyPCvtBYM3N6
 6iRC4uET9KxbIdyPz0cbyLvdhdTTiBMQFEHzYBH0AwFJhWYFqilmetNu5MjLo6hb
 0BHM5FOhpyxDmL1bKNvFNb8T8SbpDraWvbTso2XFhAl1kTWpA7yRZlSqcFBU7M22
 wgc/mwBUJoGzZBHizyp6
 =G3om
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.20-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 "First set of media patches contains:

   - Three new platform drivers: aspeed-video seco-sed and sun5i-csi;

   - One new sensor driver: imx214;

   - Support for Xbox DVD Movie Playback kit remote controller;

   - Removal of the legacy friio driver. The functionalities were ported
     to another driver, already merged;

   - New staging driver: Rockchip VPU;

   - Added license text or SPDX tags to all media documentation files;

   - Usual set of cleanup, fixes and enhancements"

* tag 'media/v4.20-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (263 commits)
  media: cx23885: only reset DMA on problematic CPUs
  media: ddbridge: Move asm includes after linux ones
  media: drxk_hard: check if parameter is not NULL
  media: docs: fix some GPL licensing ambiguity at the text
  media: platform: Add Aspeed Video Engine driver
  media: dt-bindings: media: Add Aspeed Video Engine binding documentation
  media: vimc: fix start stream when link is disabled
  media: v4l2-device: Link subdevices to their parent devices if available
  media: siano: Use kmemdup instead of duplicating its function
  media: rockchip vpu: remove some unused vars
  media: cedrus: don't initialize pointers with zero
  media: cetrus: return an error if alloc fails
  media: cedrus: Add device-tree compatible and variant for A64 support
  media: cedrus: Add device-tree compatible and variant for H5 support
  media: dt-bindings: media: cedrus: Add compatibles for the A64 and H5
  media: video-i2c: check if chip struct has set_power function
  media: video-i2c: support runtime PM
  media: staging: media: imx: Use of_node_name_eq for node name comparisons
  media: v4l2-subdev: document controls need _FL_HAS_DEVNODE
  media: vivid: Improve timestamping
  ...
 2018-12-25 13:00:14 -08:00
Linus Torvalds
eaa7649971 SPI NOR Changes 
Core changes:
   - Parse the 4BAIT SFDP section
   - Add a bunch of SPI NOR entries to the flash_info table
   - Add the concept of SFDP fixups and use it to fix a bug on MX25L25635F
   - A bunch of minor cleanups/comestic changes
 
 NAND changes:
   NAND core changes:
   - kernel-doc miscellaneous fixes.
   - Third batch of fixes/cleanup to the raw NAND core impacting various
     controller drivers (ams-delta, marvell, fsmc, denali, tegra, vf610):
     * Stopping to pass mtd_info objects to internal functions
     * Reorganizing code to avoid forward declarations
     * Dropping useless test in nand_legacy_set_defaults()
     * Moving nand_exec_op() to internal.h
     * Adding nand_[de]select_target() helpers
     * Passing the CS line to be selected in struct nand_operation
     * Making ->select_chip() optional when ->exec_op() is implemented
     * Deprecating the ->select_chip() hook
     * Moving the ->exec_op() method to nand_controller_ops
     * Moving ->setup_data_interface() to nand_controller_ops
     * Deprecating the dummy_controller field
     * Fixing JEDEC detection
     * Providing a helper for polling GPIO R/B pin
 
   Raw NAND chip drivers changes:
   - Macronix:
     * Flagging 1.8V AC chips with a broken GET_FEATURES(TIMINGS)
 
   Raw NAND controllers drivers changes:
   - Ams-delta:
     * Fixing the error path
     * SPDX tag added
     * May be compiled with COMPILE_TEST=y
     * Conversion to ->exec_op() interface
     * Dropping .IOADDR_R/W use
     * Use GPIO API for data I/O
   - Denali:
     * Removing denali_reset_banks()
     * Removing ->dev_ready() hook
     * Including <linux/bits.h> instead of <linux/bitops.h>
     * Changes to comply with the above fixes/cleanup done in the core.
   - FSMC:
     * Adding an SPDX tag to replace the license text
     * Making conversion from chip to fsmc consistent
     * Fixing unchecked return value in fsmc_read_page_hwecc
     * Changes to comply with the above fixes/cleanup done in the core.
   - Marvell:
     * Preventing timeouts on a loaded machine (fix)
     * Changes to comply with the above fixes/cleanup done in the core.
   - OMAP2:
     * Pass the parent of pdev to dma_request_chan() (fix)
   - R852:
     * Use generic DMA API
   - sh_flctl:
     * Converting to SPDX identifiers
   - Sunxi:
     * Write pageprog related opcodes to the right register: WCMD_SET (fix)
   - Tegra:
     * Stop implementing ->select_chip()
   - VF610:
     * Adding an SPDX tag to replace the license text
     * Changes to comply with the above fixes/cleanup done in the core.
   - Various trivial/spelling/coding style fixes.
 
   SPI-NAND drivers changes:
   - Removing the depreacated mt29f_spinand driver from staging.
   - Adding support for:
     * Toshiba TC58CVG2S0H
     * GigaDevice GD5FxGQ4xA
     * Winbond W25N01GV
 
 JFFS2 changes:
 - Fix a lockdep issue
 
 MTD changes:
 - Rework the physmap driver to merge gpio-addr-flash and physmap_of
   in it
 - Add a new compatible for RedBoot partitions
 - Make sub-partitions RW if the parent partition was RO because of a
   mis-alignment
 - Add pinctrl support to the
 - Addition of /* fall-through */ comments where appropriate
 - Various minor fixes and cleanups
 
 Other changes:
 - Update my email address
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEKmCqpbOU668PNA69Ze02AX4ItwAFAlwZRoocHGJvcmlzLmJy
 ZXppbGxvbkBib290bGluLmNvbQAKCRBl7TYBfgi3ALhmEACGoyJLVxRsE0yXOex7
 JdPhZxnOkwnzaxQPQBQ7pFrWvRinV1Th8JenCCLiyM6DBcIDRo/87etC6cnjfnH/
 eJ8e7xPLiESCsAB8xixP1YvLaZQzjBKOH/+qNR6anp505ZNKhgsuUDATLSFfaEvz
 bZv3f1V70dPXdEK/3QXDZakqVtfvVBMSdyJMWdKSdVn70yA72wCPP4igcGdfYfoZ
 KKaanhS1EdxA++WFrRqocQay9rtjnFGONHLfrefop9YKSevLp1UDZSAYSk4CHcEf
 yaMFD+qlxc0wHlOk4XyDY3vREcdO50r2vXfN/Hxf0D6JeC/6RT0Hrm0YyY8X/u7l
 xLhSv+DKGyft3SnQ4MDdwg57bvDSOkPryI3cxBul3S6I00pCdo8l5zQskezDbk0E
 CkUuB+f7Wn3lmV7W8ZNbYHx0ljVJEXMxEQ6m/6ZLizIr/aC7m5ncgv8a3mL7QQQA
 KXuLamw9pPlf/tAOQxB1PTiE1n8ECYqcInJXzoxaRzUdn8TlIYjxUb7GIDoOFpzm
 6a3oCx6tUZq4j/GAoyYgo12NhH0aYW3X/V8N7SfPjmIofvFiUL1y1VQ2ghNDLCqH
 2cz6WsFGoA0oSVnxl/TSSM6/ZXbvnLgM4zq6+wZITyCFNwyC956MddZrjL6lVkMT
 s6kvh/h3wBWN+GxwlDeY+KZMlQ==
 =myqK
 -----END PGP SIGNATURE-----

Merge tag 'mtd/for-4.21' of git://git.infradead.org/linux-mtd

Pull mtd updates from Boris Brezillon:
 "SPI NOR Core changes:
   - Parse the 4BAIT SFDP section
   - Add a bunch of SPI NOR entries to the flash_info table
   - Add the concept of SFDP fixups and use it to fix a bug on MX25L25635F
   - A bunch of minor cleanups/comestic changes

  NAND core changes:
   - kernel-doc miscellaneous fixes.
   - Third batch of fixes/cleanup to the raw NAND core impacting various
     controller drivers (ams-delta, marvell, fsmc, denali, tegra,
     vf610):
      * Stop to pass mtd_info objects to internal functions
      * Reorganize code to avoid forward declarations
      * Drop useless test in nand_legacy_set_defaults()
      * Move nand_exec_op() to internal.h
      * Add nand_[de]select_target() helpers
      * Pass the CS line to be selected in struct nand_operation
      * Make ->select_chip() optional when ->exec_op() is implemented
      * Deprecate the ->select_chip() hook
      * Move the ->exec_op() method to nand_controller_ops
      * Move ->setup_data_interface() to nand_controller_ops
      * Deprecate the dummy_controller field
      * Fix JEDEC detection
      * Provide a helper for polling GPIO R/B pin

  Raw NAND chip drivers changes:
   - Macronix:
      * Flag 1.8V AC chips with a broken GET_FEATURES(TIMINGS)

  Raw NAND controllers drivers changes:
   - Ams-delta:
      * Fix the error path
      * SPDX tag added
      * May be compiled with COMPILE_TEST=y
      * Conversion to ->exec_op() interface
      * Drop .IOADDR_R/W use
      * Use GPIO API for data I/O
   - Denali:
      * Remove denali_reset_banks()
      * Remove ->dev_ready() hook
      * Include <linux/bits.h> instead of <linux/bitops.h>
      * Changes to comply with the above fixes/cleanup done in the core.
   - FSMC:
      * Add an SPDX tag to replace the license text
      * Make conversion from chip to fsmc consistent
      * Fix unchecked return value in fsmc_read_page_hwecc
      * Changes to comply with the above fixes/cleanup done in the core.
   - Marvell:
      * Prevent timeouts on a loaded machine (fix)
      * Changes to comply with the above fixes/cleanup done in the core.
   - OMAP2:
      * Pass the parent of pdev to dma_request_chan() (fix)
   - R852:
      * Use generic DMA API
   - sh_flctl:
      * Convert to SPDX identifiers
   - Sunxi:
      * Write pageprog related opcodes to the right register: WCMD_SET (fix)
   - Tegra:
      * Stop implementing ->select_chip()
   - VF610:
      * Add an SPDX tag to replace the license text
      * Changes to comply with the above fixes/cleanup done in the core.
   - Various trivial/spelling/coding style fixes.

  SPI-NAND drivers changes:
   - Remove the depreacated mt29f_spinand driver from staging.
   - Add support for:
      * Toshiba TC58CVG2S0H
      * GigaDevice GD5FxGQ4xA
      * Winbond W25N01GV

  JFFS2 changes:
   - Fix a lockdep issue

  MTD changes:
   - Rework the physmap driver to merge gpio-addr-flash and physmap_of
     in it
   - Add a new compatible for RedBoot partitions
   - Make sub-partitions RW if the parent partition was RO because of a
     mis-alignment
   - Add pinctrl support to the
   - Addition of /* fall-through */ comments where appropriate
   - Various minor fixes and cleanups

  Other changes:
   - Update my email address"

* tag 'mtd/for-4.21' of git://git.infradead.org/linux-mtd: (108 commits)
  mtd: rawnand: sunxi: Write pageprog related opcodes to WCMD_SET
  MAINTAINERS: Update my email address
  mtd: rawnand: marvell: prevent timeouts on a loaded machine
  mtd: rawnand: omap2: Pass the parent of pdev to dma_request_chan()
  mtd: rawnand: Fix JEDEC detection
  mtd: spi-nor: Add support for is25lp016d
  mtd: spi-nor: parse SFDP 4-byte Address Instruction Table
  mtd: spi-nor: Add 4B_OPCODES flag to is25lp256
  mtd: spi-nor: Add an SPDX tag to spi-nor.{c,h}
  mtd: spi-nor: Make the enable argument passed to set_byte() a bool
  mtd: spi-nor: Stop passing flash_info around
  mtd: spi-nor: Avoid forward declaration of internal functions
  mtd: spi-nor: Drop inline on all internal helpers
  mtd: spi-nor: Add a post BFPT fixup for MX25L25635E
  mtd: spi-nor: Add a post BFPT parsing fixup hook
  mtd: spi-nor: Add the SNOR_F_4B_OPCODES flag
  mtd: spi-nor: cast to u64 to avoid uint overflows
  mtd: spi-nor: Add support for IS25LP032/064
  mtd: spi-nor: add entry for mt35xu512aba flash
  mtd: spi-nor: add macros related to MICRON flash
  ...
 2018-12-25 12:49:46 -08:00
Linus Torvalds
b3cc2bfe72 Add initial support for I3C along with 2 I3C master controller drivers. 
-----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEKmCqpbOU668PNA69Ze02AX4ItwAFAlwaZvIcHGJvcmlzLmJy
 ZXppbGxvbkBib290bGluLmNvbQAKCRBl7TYBfgi3APnqD/9gM5jqbApG264chvyh
 5snevHVwSeXFng1DhulfEB4g+48fNx3vu2dC9cgXLuFpTeCTcW3JktsQBJHEGix7
 Az+NrQW5ddTOQ1iHX+ojSTkzFs6lUX/rnEZ8avDTcvaMMk+R30OLPYq4SJKhGejq
 eyfCq2i8DqXp6Jy00RpE3XvsRa4Yg20FCg6ulCMv/iYH5xlkTGCz7TmxBN6hqSZQ
 +/C78yvS8dljY9JzLNW/h8C+VXB5ZLscxhHRjjawAHGx+QkSFieFpr/7bYt3hJkP
 lN1iBEm2pFmRSsP0aHrfrl3VIXx8g3WHF7fdu2nFnA4aGlyTsmWaCD7lly/uVSkm
 pynTsuq4rFSrkQerteYRFwqw3RaS5vrIkJYP2vTCoM5Lguav0yb284FjKBIf/I1q
 I7vF7cRr6AeQW/1wbXDbAsgPJutxQkvVMgKWao+sUw8llc37N50e3WONfNxRujrN
 2P2sOtDjEQnh6PKAeskexDhDVJe4k2Oo7oKFj0sFxJ+4GYQgFAtzXB0d6OhtOakh
 UzhESyTWkL4dv7fMBdC8lsWXI04BWGtpf2jfq+Nko9qQr91ds1Sh3FNwEuMuaQx0
 UxKO6G3Mx0kPUbLSG0yLwpvJtqFN/02H8HZndKeDhYSktPqKRhVmLcxjFf419OYV
 fiAUqG54hbkPQbswgXFupsw7wg==
 =lXwz
 -----END PGP SIGNATURE-----

Merge tag 'i3c/for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux

Pull initial i3c support from Boris Brezillon:
 "Add initial support for I3C along with two I3C master controller
  drivers"

* tag 'i3c/for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: cdns: fix I2C transfers in Cadence I3C master driver
  ic3: off by one in mode_show()
  i3c: fix an error code in i3c_master_add_i3c_dev_locked()
  i3c: master: dw: fix mask operation by using the correct operator
  MAINTAINERS: Add myself as the dw-i3c-master module maintainer
  dt-binding: i3c: Document Synopsys DesignWare I3C
  i3c: master: Add driver for Synopsys DesignWare IP
  i3c: master: Remove set but not used variable 'old_i3c_scl_lim'
  dt-bindings: i3c: Document Cadence I3C master bindings
  i3c: master: Add driver for Cadence IP
  MAINTAINERS: Add myself as the I3C subsystem maintainer
  dt-bindings: i3c: Document core bindings
  i3c: Add sysfs ABI spec
  docs: driver-api: Add I3C documentation
  i3c: Add core I3C infrastructure
 2018-12-25 12:26:34 -08:00
Linus Torvalds
4971f090aa drm pull request for 4.21-rc1 
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcExwOAAoJEAx081l5xIa+euIP/1NZZvSB+bsCtOwDG8I6uWsS
 OU5JUZ8q2dqyyFagRxzlkeSt3uWJqKp5NyNwuc9z/5u6AGF+3/97D0J1lG6Os/st
 4abF6NadivYJ4cXhJ1ddIHOFMVDcAsyMWNDb93NwPwncCsQ0jt5FFOsrCyj6BGY+
 ihHFlHrIyDrbBGDHz+u1E/EO5WkNnaLDoC+/k2fTRWCNI3bQL3O+orsYTI6S2uvU
 lQJnRfYAllgLD2p1k/rrBHcHXBv50roR0e8uhGmbdhGdp5bEW30UGBLHXxQjjSVy
 fQCwFwTO8X6zoxU53Zbbk+MVrp+jkTHcGKViHRuLkaHzE5mX26UXDwlXdN32ZUbK
 yHOJp+uDaWXX7MIz0LsB9Iqj2+eIUoFaIJMoZTMGVTNvqnTxKnoHnjAtbTH2u258
 teFgmy4BIgPgo2kwEnBEZjCapou0Eivyut2wq8bTAB2Fe8LwURJpr3cioTtMLlUO
 L5/PoD27eFvBCAeFrQIwF3b2XiQEnBpXocmilEwP1xDMPgoyeePAfIF2iEpDvi0U
 jce3rLd2yVvo92xYUgoHkVTD8si/pKKnZ1D0U3+RI6pxK6s0HJEHjcNEMdvdm+2S
 4qgvBQV3wlWFkXEK8PR5BHPoLntg18tKon/BTLBjgGkN9E1o9fWs1/s6KQGY4xdo
 l3Vvfx2LTdkgEoBssSwB
 =wh4W
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "Core:
   - shared fencing staging removal
   - drop transactional atomic helpers and move helpers to new location
   - DP/MST atomic cleanup
   - Leasing cleanups and drop EXPORT_SYMBOL
   - Convert drivers to atomic helpers and generic fbdev.
   - removed deprecated obj_ref/unref in favour of get/put
   - Improve dumb callback documentation
   - MODESET_LOCK_BEGIN/END helpers

  panels:
   - CDTech panels, Banana Pi Panel, DLC1010GIG,
   - Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA,
   - Himax HX8357D, simulated RTSM AEMv8.
   - GPD Win2 panel
   - AUO G101EVN010

  vgem:
   - render node support

  ttm:
   - move global init out of drivers
   - fix LRU handling for ghost objects
   - Support for simultaneous submissions to multiple engines

  scheduler:
   - timeout/fault handling changes to help GPU recovery
   - helpers for hw with preemption support

  i915:
   - Scaler/Watermark fixes
   - DP MST + powerwell fixes
   - PSR fixes
   - Break long get/put shmemfs pages
   - Icelake fixes
   - Icelake DSI video mode enablement
   - Engine workaround improvements

  amdgpu:
   - freesync support
   - GPU reset enabled on CI, VI, SOC15 dGPUs
   - ABM support in DC
   - KFD support for vega12/polaris12
   - SDMA paging queue on vega
   - More amdkfd code sharing
   - DCC scanout on GFX9
   - DC kerneldoc
   - Updated SMU firmware for GFX8 chips
   - XGMI PSP + hive reset support
   - GPU reset
   - DC trace support
   - Powerplay updates for newer Polaris
   - Cursor plane update fast path
   - kfd dma-buf support

  virtio-gpu:
   - add EDID support

  vmwgfx:
   - pageflip with damage support

  nouveau:
   - Initial Turing TU104/TU106 modesetting support

  msm:
   - a2xx gpu support for apq8060 and imx5
   - a2xx gpummu support
   - mdp4 display support for apq8060
   - DPU fixes and cleanups
   - enhanced profiling support
   - debug object naming interface
   - get_iova/page pinning decoupling

  tegra:
   - Tegra194 host1x, VIC and display support enabled
   - Audio over HDMI for Tegra186 and Tegra194

  exynos:
   - DMA/IOMMU refactoring
   - plane alpha + blend mode support
   - Color format fixes for mixer driver

  rcar-du:
   - R8A7744 and R8A77470 support
   - R8A77965 LVDS support

  imx:
   - fbdev emulation fix
   - multi-tiled scalling fixes
   - SPDX identifiers

  rockchip
   - dw_hdmi support
   - dw-mipi-dsi + dual dsi support
   - mailbox read size fix

  qxl:
   - fix cursor pinning

  vc4:
   - YUV support (scaling + cursor)

  v3d:
   - enable TFU (Texture Formatting Unit)

  mali-dp:
   - add support for linear tiled formats

  sun4i:
   - Display Engine 3 support
   - H6 DE3 mixer 0 support
   - H6 display engine support
   - dw-hdmi support
   - H6 HDMI phy support
   - implicit fence waiting
   - BGRX8888 support

  meson:
   - Overlay plane support
   - implicit fence waiting
   - HDMI 1.4 4k modes

  bridge:
   - i2c fixes for sii902x"

* tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (1403 commits)
  drm/amd/display: Add fast path for cursor plane updates
  drm/amdgpu: Enable GPU recovery by default for CI
  drm/amd/display: Fix duplicating scaling/underscan connector state
  drm/amd/display: Fix unintialized max_bpc state values
  Revert "drm/amd/display: Set RMX_ASPECT as default"
  drm/amdgpu: Fix stub function name
  drm/msm/dpu: Fix clock issue after bind failure
  drm/msm/dpu: Clean up dpu_media_info.h static inline functions
  drm/msm/dpu: Further cleanups for static inline functions
  drm/msm/dpu: Cleanup the debugfs functions
  drm/msm/dpu: Remove dpu_irq and unused functions
  drm/msm: Make irq_postinstall optional
  drm/msm/dpu: Cleanup callers of dpu_hw_blk_init
  drm/msm/dpu: Remove unused functions
  drm/msm/dpu: Remove dpu_crtc_is_enabled()
  drm/msm/dpu: Remove dpu_crtc_get_mixer_height
  drm/msm/dpu: Remove dpu_dbg
  drm/msm: dpu: Remove crtc_lock
  drm/msm: dpu: Remove vblank_requested flag from dpu_crtc
  drm/msm: dpu: Separate crtc assignment from vblank enable
  ...
 2018-12-25 11:48:26 -08:00
Linus Torvalds
c76cd634eb platform-drivers-x86 for v4.21-1 
The USB Power Delivery discrete components now can be enumerated by
 i2c-multi-instantiate driver via several resources under single ACPI
 device node (ACPI ID is INT3515).
 
 Touchscreen support is added for the Mediacom Flexbook Edge 11.
 
 Mellanox driver got fixed due to updates in their firmware.
 
 The power management stub driver for AtomISP v2 is fixed in order to support
 Intel Baytrail SoCs where same quirk is needed for S0ix to work.
 
 Special key handling has been fixed for Favorites hotkey on Thinkpad, and
 Screen LOCK on ASUS.
 
 Ideapad Yoga 2 13 has no HW rfkill switch, thus, driver has been updated
 to support this.
 
 Few cleanups related to debugfs have been made in Intel IPS and
 Intel PMC drivers. Besides that Intel PMC has been extended
 to show more detailed information about Latency Tolerance.
 
 The following is an automated git shortlog grouped by driver:
 
 ACPI / scan:
  -  Create platform device for INT3515 ACPI nodes
 
 Add the VLV ISP PCI ID to atomisp2_pm:
  - Add the VLV ISP PCI ID to atomisp2_pm
 
 asus-nb-wmi:
  -  Drop mapping of 0x33 and 0x34 scan codes
  -  Map 0x35 to KEY_SCREENLOCK
 
 asus-wmi:
  -  Tell the EC the OS will handle the display off hotkey
 
 dell-laptop:
  -  Mark expected switch fall-throughs
 
 Documentation/ABI:
  -  Add new attribute for mlxreg-io sysfs interfaces
 
 Fix config space access for intel_atomisp2_pm:
  - Fix config space access for intel_atomisp2_pm
 
 i2c:
  -  acpi: Introduce i2c_acpi_get_i2c_resource() helper
  -  acpi: Use ACPI_FAILURE instead of !ACPI_SUCCESS
  -  acpi: Return error pointers from i2c_acpi_new_device()
 
 i2c-multi-instantiate:
  -  Allow to have same slaves
  -  Introduce IOAPIC IRQ support
  -  Distinguish IRQ resource type
  -  Count I2cSerialBus() resources
  -  Get rid of obsolete conditional
  -  Defer probe when no adapter found
  -  Accept errors of i2c_acpi_new_device()
 
 ideapad-laptop:
  -  Add Yoga 2 13 to no_hw_rfkill list
 
 iio:
  -  inv_mpu6050: Use i2c_acpi_get_i2c_resource() helper
 
 intel_cht_int33fe:
  -  Get rid of obsolete conditional
  -  Accept errors of i2c_acpi_new_device()
  -  Remove duplicate NULL check
 
 intel_ips:
  -  Convert to use DEFINE_SHOW_ATTRIBUTE macro
  -  Remove never happen condition
  -  NULL check before some freeing functions is not needed
  -  remove unnecessary checks in ips_debugfs_init
 
 intel_pmc_core:
  -  convert to DEFINE_SHOW_ATTRIBUTE
  -  Decode Snoop / Non Snoop LTR
  -  Fix LTR IGNORE Max offset
  -  Show Latency Tolerance info
 
 intel_telemetry:
  -  convert to DEFINE_SHOW_ATTRIBUTE
 
 mlx-platform:
  -  Convert to use SPDX identifier
  -  Allow mlxreg-io driver activation for new systems
  -  Fix LED configuration
  -  Fix tachometer registers
  -  Rename new systems product names
  -  Add definitions for new registers
 
 thinkpad_acpi:
  -  Cleanup quirks macros
  -  Change the keymap for Favorites hotkey
 
 touchscreen_dmi:
  -  Add info for the Mediacom Flexbook Edge 11
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAlwRE+sACgkQb7wzTHR8
 rCi7URAAgpfdsHUkj3PdFmp5o3LHCD0m5Z9A6yAJrXyhCDRRkAMaGYyRe4vg3qE1
 GBA6MbMyOrtW/LqvaQAajeMmDINl1Mz/5OIVCIwJUPnKk8K7Yy93pH5vKecUPX8q
 ihItKmJIPdaqxH2LXrx6sh3Ob3QrVrcpfpW6109WM8auYB+BiNOhxejBZ4jvMiRd
 9dG657gx64Y6Ot5kjGKpdblFrA930sA5kAiMFiCcjNP9S7xLhgfyZiPMSP48gUWb
 OiqoJMsomamF8qxZsZzfRblZpOlFahuW51D2vZgHb7N6fA0qW1c3twdSoivQfTHa
 KA+OuMgJ52vI8JDgUKj55LB88Pn5iFtmDsNodgQ25cBLgBkzKJQU9MfoK8QafvlV
 OTjmGL+ENK4VufDwMEgOMlXdihVewOrQ3kzOm7JQgIlOSWE7l9BSa2CK0vSM9Jha
 nfjjc5LowJaWA+QUrmx29VrRGmSYfrGhquGV/3U+TPafc5blpiqWTGxIkhaNFhKx
 0yk/vzggGsIlvnYU2+zaJW8LAhLcb4R6ATEZMurZQdZlQefs+5oAEPSvOZ5gYdLX
 PWj3swTMkIp7FKjGm7532T83v5lJyO9cxSV/3aIqzkdWNqMoYDDuNU8wCzTTBv5m
 EoKQO+H2WCnlm5bgWQ82gjVDKmS63eDlT4WgYxm60OZ1ONuAwIo=
 =kYH6
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.21-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Andy Shevchenko:

 - The USB Power Delivery discrete components now can be enumerated by
   i2c-multi-instantiate driver via several resources under single ACPI
   device node (ACPI ID is INT3515).

 - Touchscreen support is added for the Mediacom Flexbook Edge 11.

 - Mellanox driver got fixed due to updates in their firmware.

 - The power management stub driver for AtomISP v2 is fixed in order to
   support Intel Baytrail SoCs where same quirk is needed for S0ix to
   work.

 - Special key handling has been fixed for Favorites hotkey on Thinkpad,
   and Screen LOCK on ASUS.

 - Ideapad Yoga 2 13 has no HW rfkill switch, thus, driver has been
   updated to support this.

 - Few cleanups related to debugfs have been made in Intel IPS and Intel
   PMC drivers. Besides that Intel PMC has been extended to show more
   detailed information about Latency Tolerance

* tag 'platform-drivers-x86-v4.21-1' of git://git.infradead.org/linux-platform-drivers-x86: (41 commits)
  platform/x86: mlx-platform: Convert to use SPDX identifier
  Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
  platform/x86: mlx-platform: Allow mlxreg-io driver activation for new systems
  platform/x86: mlx-platform: Fix LED configuration
  platform/x86: mlx-platform: Fix tachometer registers
  platform/x86: mlx-platform: Rename new systems product names
  platform/x86: mlx-platform: Add definitions for new registers
  platform/x86: intel_telemetry: convert to DEFINE_SHOW_ATTRIBUTE
  platform/x86: intel_pmc_core: convert to DEFINE_SHOW_ATTRIBUTE
  platform/x86: thinkpad_acpi: Cleanup quirks macros
  platform/x86: touchscreen_dmi: Add info for the Mediacom Flexbook Edge 11
  platform/x86: Fix config space access for intel_atomisp2_pm
  platform/x86: Add the VLV ISP PCI ID to atomisp2_pm
  platform/x86: intel_ips: Convert to use DEFINE_SHOW_ATTRIBUTE macro
  platform/x86: intel_ips: Remove never happen condition
  platform/x86: intel_ips: NULL check before some freeing functions is not needed
  platform/x86: intel_ips: remove unnecessary checks in ips_debugfs_init
  iio: inv_mpu6050: Use i2c_acpi_get_i2c_resource() helper
  ACPI / scan: Create platform device for INT3515 ACPI nodes
  platform/x86: i2c-multi-instantiate: Allow to have same slaves
  ...
 2018-12-25 11:04:17 -08:00
Fabrizio Castro
e94b815524 dt-bindings: pwm: rcar: Add r8a774c0 support 
Document RZ/G2E (R8A774C0) SoC bindings.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
 2018-12-24 12:06:56 +01:00
Michael Ellerman
12526b0d6c Merge branch 'next' of https://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux into next 
Freescale updates from Scott:

"Highlights include elimination of legacy clock bindings use from dts
 files, an 83xx watchdog handler, fixes to old dts interrupt errors, and
 some minor cleanup."
 2018-12-24 14:14:45 +11:00
Eric Biggers
c79b411eaa crypto: skcipher - remove remnants of internal IV generators 
Remove dead code related to internal IV generators, which are no longer
used since they've been replaced with the "seqiv" and "echainiv"
templates.  The removed code includes:

- The "givcipher" (GIVCIPHER) algorithm type.  No algorithms are
  registered with this type anymore, so it's unneeded.

- The "const char *geniv" member of aead_alg, ablkcipher_alg, and
  blkcipher_alg.  A few algorithms still set this, but it isn't used
  anymore except to show via /proc/crypto and CRYPTO_MSG_GETALG.
  Just hardcode "<default>" or "<none>" in those cases.

- The 'skcipher_givcrypt_request' structure, which is never used.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 2018-12-23 11:52:45 +08:00
Yuantian Tang
a6ee0c00a7 clk: qoriq: add more compatibles strings 
Add more SoC compatible strings to support more chips.

Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Scott Wood <oss@buserror.net>
 2018-12-21 21:00:07 -06:00
Mark Brown
b27d9668be
Merge branch 'regulator-4.21' into regulator-next 2018-12-21 13:43:32 +00:00
Rafael J. Wysocki
3a56fe685d Merge branches 'pm-cpuidle', 'pm-cpufreq' and 'pm-cpufreq-sched' 
* pm-cpuidle:
  cpuidle: Add 'above' and 'below' idle state metrics
  cpuidle: big.LITTLE: fix refcount leak
  cpuidle: Add cpuidle.governor= command line parameter
  cpuidle: poll_state: Disregard disable idle states
  Documentation: admin-guide: PM: Add cpuidle document

* pm-cpufreq:
  cpufreq: qcom-hw: Add support for QCOM cpufreq HW driver
  dt-bindings: cpufreq: Introduce QCOM cpufreq firmware bindings
  cpufreq: nforce2: Remove meaningless return
  cpufreq: ia64: Remove unused header files
  cpufreq: imx6q: save one condition block for normal case of nvmem read
  cpufreq: imx6q: remove unused code
  cpufreq: pmac64: add of_node_put()
  cpufreq: powernv: add of_node_put()
  Documentation: intel_pstate: Clarify coordination of P-State limits
  cpufreq: intel_pstate: Force HWP min perf before offline
  cpufreq: s3c24xx: Change to use DEFINE_SHOW_ATTRIBUTE macro

* pm-cpufreq-sched:
  sched/cpufreq: Add the SPDX tags
 2018-12-21 10:06:06 +01:00
David S. Miller
c3e5336925 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next 
Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next:

1) Support for destination MAC in ipset, from Stefano Brivio.

2) Disallow all-zeroes MAC address in ipset, also from Stefano.

3) Add IPSET_CMD_GET_BYNAME and IPSET_CMD_GET_BYINDEX commands,
   introduce protocol version number 7, from Jozsef Kadlecsik.
   A follow up patch to fix ip_set_byindex() is also included
   in this batch.

4) Honor CTA_MARK_MASK from ctnetlink, from Andreas Jaggi.

5) Statify nf_flow_table_iterate(), from Taehee Yoo.

6) Use nf_flow_table_iterate() to simplify garbage collection in
   nf_flow_table logic, also from Taehee Yoo.

7) Don't use _bh variants of call_rcu(), rcu_barrier() and
   synchronize_rcu_bh() in Netfilter, from Paul E. McKenney.

8) Remove NFC_* cache definition from the old caching
   infrastructure.

9) Remove layer 4 port rover in NAT helpers, use random port
   instead, from Florian Westphal.

10) Use strscpy() in ipset, from Qian Cai.

11) Remove NF_NAT_RANGE_PROTO_RANDOM_FULLY branch now that
    random port is allocated by default, from Xiaozhou Liu.

12) Ignore NF_NAT_RANGE_PROTO_RANDOM too, from Florian Westphal.

13) Limit port allocation selection routine in NAT to avoid
    softlockup splats when most ports are in use, from Florian.

14) Remove unused parameters in nf_ct_l4proto_unregister_sysctl()
    from Yafang Shao.

15) Direct call to nf_nat_l4proto_unique_tuple() instead of
    indirection, from Florian Westphal.

16) Several patches to remove all layer 4 NAT indirections,
    remove nf_nat_l4proto struct, from Florian Westphal.

17) Fix RTP/RTCP source port translation when SNAT is in place,
    from Alin Nastac.

18) Selective rule dump per chain, from Phil Sutter.

19) Revisit CLUSTERIP target, this includes a deadlock fix from
    netns path, sleep in atomic, remove bogus WARN_ON_ONCE()
    and disallow mismatching IP address and MAC address.
    Patchset from Taehee Yoo.

20) Update UDP timeout to stream after 2 seconds, from Florian.

21) Shrink UDP established timeout to 120 seconds like TCP timewait.

22) Sysctl knobs to set GRE timeouts, from Yafang Shao.

23) Move seq_print_acct() to conntrack core file, from Florian.

24) Add enum for conntrack sysctl knobs, also from Florian.

25) Place nf_conntrack_acct, nf_conntrack_helper, nf_conntrack_events
    and nf_conntrack_timestamp knobs in the core, from Florian Westphal.
    As a side effect, shrink netns_ct structure by removing obsolete
    sysctl anchors, also from Florian.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-12-20 18:20:26 -08:00
David S. Miller
e69fbf31ca wireless-drivers-next patches for 4.21 
Last set of patches for 4.21. mt76 is still in very active development
 and having some refactoring as well as new features. But also other
 drivers got few new features and fixes.
 
 Major changes:
 
 ath10k
 
 * add amsdu support for QCA6174 monitor mode
 
 * report tx rate using the new ieee80211_tx_rate_update() API
 
 * wcn3990 support is not experimental anymore
 
 iwlwifi
 
 * support for FW version 43 for 9000 and 22000 series
 
 brcmfmac
 
 * add support for CYW43012 SDIO chipset
 
 * add the raw 4354 PCIe device ID for unprogrammed Cypress boards
 
 mwifiex
 
 * add NL80211_STA_INFO_RX_BITRATE support
 
 mt76
 
 * use the same firmware for mt76x2e and mt76x2u
 
 * mt76x0e survey support
 
 * more unification between mt76x2 and mt76x0
 
 * mt76x0e AP mode support
 
 * mt76x0e DFS support
 
 * rework and fix tx status handling for mt76x0 and mt76x2
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcG9TEAAoJEG4XJFUm622byW8H/1vMVJhXwgIZbHeoUKNa47Yp
 Z7Jv5vW8IGXu+lp7DyoedDCbq4+lskNSlDV1DmysNChLgDnApU/3oCd/jH8EiGPV
 JAFUHb85HuVLTTpPpNHtnYz3IzL7r098TNVxOU0VD+xILM0Mf0aCeXztgmFWpGaY
 /rfHkId8oKUezIjdu6Dc96mqITrT6WRNtnOMfjr6dZPjClRTS44Hyz3Ga3rXABBL
 /n8BCkl0GpKGrL3mBy2CCR5mVY8zfxMB4Aj2zx7bccZ8i2i2QjrGlXCHyB6ImNrR
 lv4L1fUVXZWVdeOe8EbpftY7zEsPrX+XNm6h1kckdB7UyuBROpQLsVb+yxlLh9g=
 =mhAw
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-for-davem-2018-12-20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.21

Last set of patches for 4.21. mt76 is still in very active development
and having some refactoring as well as new features. But also other
drivers got few new features and fixes.

Major changes:

ath10k

* add amsdu support for QCA6174 monitor mode

* report tx rate using the new ieee80211_tx_rate_update() API

* wcn3990 support is not experimental anymore

iwlwifi

* support for FW version 43 for 9000 and 22000 series

brcmfmac

* add support for CYW43012 SDIO chipset

* add the raw 4354 PCIe device ID for unprogrammed Cypress boards

mwifiex

* add NL80211_STA_INFO_RX_BITRATE support

mt76

* use the same firmware for mt76x2e and mt76x2u

* mt76x0e survey support

* more unification between mt76x2 and mt76x0

* mt76x0e AP mode support

* mt76x0e DFS support

* rework and fix tx status handling for mt76x0 and mt76x2
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-12-20 16:47:10 -08:00
Mahesh Salgaonkar
a4e92ce8e4 powerpc/fadump: Reservationless firmware assisted dump 
One of the primary issues with Firmware Assisted Dump (fadump) on Power
is that it needs a large amount of memory to be reserved. On large
systems with TeraBytes of memory, this reservation can be quite
significant.

In some cases, fadump fails if the memory reserved is insufficient, or
if the reserved memory was DLPAR hot-removed.

In the normal case, post reboot, the preserved memory is filtered to
extract only relevant areas of interest using the makedumpfile tool.
While the tool provides flexibility to determine what needs to be part
of the dump and what memory to filter out, all supported distributions
default this to "Capture only kernel data and nothing else".

We take advantage of this default and the Linux kernel's Contiguous
Memory Allocator (CMA) to fundamentally change the memory reservation
model for fadump.

Instead of setting aside a significant chunk of memory nobody can use,
this patch uses CMA instead, to reserve a significant chunk of memory
that the kernel is prevented from using (due to MIGRATE_CMA), but
applications are free to use it. With this fadump will still be able
to capture all of the kernel memory and most of the user space memory
except the user pages that were present in CMA region.

Essentially, on a P9 LPAR with 2 cores, 8GB RAM and current upstream:
[root@zzxx-yy10 ~]# free -m
              total        used        free      shared  buff/cache   available
Mem:           7557         193        6822          12         541        6725
Swap:          4095           0        4095

With this patch:
[root@zzxx-yy10 ~]# free -m
              total        used        free      shared  buff/cache   available
Mem:           8133         194        7464          12         475        7338
Swap:          4095           0        4095

Changes made here are completely transparent to how fadump has
traditionally worked.

Thanks to Aneesh Kumar and Anshuman Khandual for helping us understand
CMA and its usage.

TODO:
- Handle case where CMA reservation spans nodes.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
 2018-12-21 11:32:49 +11:00
Yafang Shao
a0badcc665 netfilter: conntrack: register sysctl table for gre 
This patch adds two sysctl knobs for GRE:

	net.netfilter.nf_conntrack_gre_timeout = 30
	net.netfilter.nf_conntrack_gre_timeout_stream = 180

Update the Documentation as well.

Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
 2018-12-21 00:51:25 +01:00
Florian Westphal
294304e4c5 netfilter: conntrack: udp: set stream timeout to 2 minutes 
We have no explicit signal when a UDP stream has terminated, peers just
stop sending.

For suspected stream connections a timeout of two minutes is sane to keep
NAT mapping alive a while longer.

It matches tcp conntracks 'timewait' default timeout value.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
 2018-12-21 00:48:46 +01:00
David S. Miller
6eea2db210 Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue 
Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2018-12-20

This series contains updates to e100, igb, ixgbe, i40e and ice drivers.

I replaced spinlocks for mutex locks to reduce the latency on CPU0 for
igb when updating the statistics.  This work was based off a patch
provided by Jan Jablonsky, which was against an older version of the igb
driver.

Jesus adjusts the receive packet buffer size from 32K to 30K when
running in QAV mode, to stay within 60K for total packet buffer size for
igb.

Vinicius adds igb kernel documentation regarding the CBS algorithm and
its implementation in the i210 family of NICs.

YueHaibing from Huawei fixed the e100 driver that was potentially
passing a NULL pointer, so use the kernel macro IS_ERR_OR_NULL()
instead.

Konstantin Khorenko fixes i40e where we were not setting up the
neigh_priv_len in our net_device, which caused the driver to read beyond
the neighbor entry allocated memory.

Miroslav Lichvar extends the PTP gettime() to read the system clock by
adding support for PTP_SYS_OFFSET_EXTENDED ioctl in i40e.

Young Xiao fixed the ice driver to only enable NAPI on q_vectors that
actually have transmit and receive rings.

Kai-Heng Feng fixes an igb issue that when placed in suspend mode, the
NIC does not wake up when a cable is plugged in.  This was due to the
driver not setting PME during runtime suspend.

Stephen Douthit enables the ixgbe driver allow DSA devices to use the
MII interface to talk to switches.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-12-20 15:34:30 -08:00
David S. Miller
2be09de7d6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 
Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.

Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.

Signed-off-by: David S. Miller <davem@davemloft.net>
 2018-12-20 11:53:36 -08:00
Vinicius Costa Gomes
bad87ee82f Documentation: igb: Add a section about CBS 
Add some pointers to the definition of the CBS algorithm, and some
notes about the limits of its implementation in the i210 family of
controllers.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
 2018-12-20 11:50:54 -08:00
Bhagavathi Perumal S
f3f587995c dt-bindings: net: ath10k: add new dt entry to identify external FEM 
This adds new dt entry ext-fem-name, it is used by ath10k driver
to select correct timing parameters and configure it in target wifi hardware.
The Front End Module(FEM) normally includes tx power amplifier(PA) and
rx low noise amplifier(LNA). The default timing parameters like tx end to
PA off timing values were fine tuned for internal FEM used in reference
design. And these timing values can not be same if ODM modifies hardware
design with different external FEM. This DT entry helps to choose correct
timing values in driver if different external FEM hardware used.

Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
 2018-12-20 19:09:51 +02:00
Bhagavathi Perumal S
e5404969a3 dt-bindings: net: ath10k: fix node name and device type in qcom ath10k example 
In qcom,ath10k documentation, ath10k is used as node name in the example of
pci based device. Normally, node name should be class of device and not the
model name, so fix it to node name "wifi". And remove the property device_type
pci since only pci bridges should have this property.

Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
 2018-12-20 19:09:41 +02:00
Govind Singh
a3542d0c73 dt: bindings: ath10k: add bindings for wifi iommu node 
WCN3990 wifi module can optionally make use of the IOMMU.
Add binding documentation for phandle to the IOMMU and
the stream id of wifi iommu block.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
 2018-12-20 19:07:39 +02:00
Govind Singh
5fac78aac9 dt: bindings: ath10k: add missing dt properties for WCN3990 wifi node 
Add missing optional properties in WCN3990 wifi node.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
 2018-12-20 19:07:29 +02:00
Mark Brown
74ff666bd7
Merge remote-tracking branches 'spi/topic/mem' and 'spi/topic/mtd' into spi-next 2018-12-20 16:01:30 +00:00