Commit Graph

1014588 Commits

Author SHA1 Message Date
David Matlack
a10453c038 KVM: selftests: Fix hang in hardware_disable_test
If /dev/kvm is not available then hardware_disable_test will hang
indefinitely because the child process exits before posting to the
semaphore for which the parent is waiting.

Fix this by making the parent periodically check if the child has
exited. We have to be careful to forward the child's exit status to
preserve a KSFT_SKIP status.

I considered just checking for /dev/kvm before creating the child
process, but there are so many other reasons why the child could exit
early that it seemed better to handle that as general case.

Tested:

$ ./hardware_disable_test
/dev/kvm not available, skipping test
$ echo $?
4
$ modprobe kvm_intel
$ ./hardware_disable_test
$ echo $?
0

Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210514230521.2608768-1-dmatlack@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-27 07:45:55 -04:00
David Matlack
50bc913d52 KVM: selftests: Ignore CPUID.0DH.1H in get_cpuid_test
Similar to CPUID.0DH.0H this entry depends on the vCPU's XCR0 register
and IA32_XSS MSR. Since this test does not control for either before
assigning the vCPU's CPUID, these entries will not necessarily match
the supported CPUID exposed by KVM.

This fixes get_cpuid_test on Cascade Lake CPUs.

Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210519211345.3944063-1-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-27 07:45:54 -04:00
David Matlack
ef4c9f4f65 KVM: selftests: Fix 32-bit truncation of vm_get_max_gfn()
vm_get_max_gfn() casts vm->max_gfn from a uint64_t to an unsigned int,
which causes the upper 32-bits of the max_gfn to get truncated.

Nobody noticed until now likely because vm_get_max_gfn() is only used
as a mechanism to create a memslot in an unused region of the guest
physical address space (the top), and the top of the 32-bit physical
address space was always good enough.

This fix reveals a bug in memslot_modification_stress_test which was
trying to create a dummy memslot past the end of guest physical memory.
Fix that by moving the dummy memslot lower.

Fixes: 52200d0d94 ("KVM: selftests: Remove duplicate guest mode handling")
Reviewed-by: Venkatesh Srinivas <venkateshs@chromium.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210521173828.1180619-1-dmatlack@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-27 07:45:54 -04:00
Maciej S. Szmigiero
cad347fab1 KVM: selftests: add a memslot-related performance benchmark
This benchmark contains the following tests:
* Map test, where the host unmaps guest memory while the guest writes to
it (maps it).

The test is designed in a way to make the unmap operation on the host
take a negligible amount of time in comparison with the mapping
operation in the guest.

The test area is actually split in two: the first half is being mapped
by the guest while the second half in being unmapped by the host.
Then a guest <-> host sync happens and the areas are reversed.

* Unmap test which is broadly similar to the above map test, but it is
designed in an opposite way: to make the mapping operation in the guest
take a negligible amount of time in comparison with the unmap operation
on the host.
This test is available in two variants: with per-page unmap operation
or a chunked one (using 2 MiB chunk size).

* Move active area test which involves moving the last (highest gfn)
memslot a bit back and forth on the host while the guest is
concurrently writing around the area being moved (including over the
moved memslot).

* Move inactive area test which is similar to the previous move active
area test, but now guest writes all happen outside of the area being
moved.

* Read / write test in which the guest writes to the beginning of each
page of the test area while the host writes to the middle of each such
page.
Then each side checks the values the other side has written.
This particular test is not expected to give different results depending
on particular memslots implementation, it is meant as a rough sanity
check and to provide insight on the spread of test results expected.

Each test performs its operation in a loop until a test period ends
(this is 5 seconds by default, but it is configurable).
Then the total count of loops done is divided by the actual elapsed
time to give the test result.

The tests have a configurable memslot cap with the "-s" test option, by
default the system maximum is used.
Each test is repeated a particular number of times (by default 20
times), the best result achieved is printed.

The test memory area is divided equally between memslots, the reminder
is added to the last memslot.
The test area size does not depend on the number of memslots in use.

The tests also measure the time that it took to add all these memslots.
The best result from the tests that use the whole test area is printed
after all the requested tests are done.

In general, these tests are designed to use as much memory as possible
(within reason) while still doing 100+ loops even on high memslot counts
with the default test length.
Increasing the test runtime makes it increasingly more likely that some
event will happen on the system during the test run, which might lower
the test result.

Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <8d31bb3d92bc8fa33a9756fa802ee14266ab994e.1618253574.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-27 07:45:54 -04:00
Maciej S. Szmigiero
22721a5610 KVM: selftests: Keep track of memslots more efficiently
The KVM selftest framework was using a simple list for keeping track of
the memslots currently in use.
This resulted in lookups and adding a single memslot being O(n), the
later due to linear scanning of the existing memslot set to check for
the presence of any conflicting entries.

Before this change, benchmarking high count of memslots was more or less
impossible as pretty much all the benchmark time was spent in the
selftest framework code.

We can simply use a rbtree for keeping track of both of gfn and hva.
We don't need an interval tree for hva here as we can't have overlapping
memslots because we allocate a completely new memory chunk for each new
memslot.

Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <b12749d47ee860468240cf027412c91b76dbe3db.1618253574.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-27 07:45:54 -04:00
Paolo Bonzini
a13534d667 selftests: kvm: fix potential issue with ELF loading
vm_vaddr_alloc() sets up GVA to GPA mapping page by page; therefore, GPAs
may not be continuous if same memslot is used for data and page table allocation.

kvm_vm_elf_load() however expects a continuous range of HVAs (and thus GPAs)
because it does not try to read file data page by page.  Fix this mismatch
by allocating memory in one step.

Reported-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-27 07:45:53 -04:00
Zhenzhong Duan
39fe2fc966 selftests: kvm: make allocation of extra memory take effect
The extra memory pages is missed to be allocated during VM creating.
perf_test_util and kvm_page_table_test use it to alloc extra memory
currently.

Fix it by adding extra_mem_pages to the total memory calculation before
allocate.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20210512043107.30076-1-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-27 07:45:53 -04:00
Wanpeng Li
da6d63a006 KVM: X86: hyper-v: Task srcu lock when accessing kvm_memslots()
WARNING: suspicious RCU usage
   5.13.0-rc1 #4 Not tainted
   -----------------------------
   ./include/linux/kvm_host.h:710 suspicious rcu_dereference_check() usage!

  other info that might help us debug this:

  rcu_scheduler_active = 2, debug_locks = 1
   1 lock held by hyperv_clock/8318:
    #0: ffffb6b8cb05a7d8 (&hv->hv_lock){+.+.}-{3:3}, at: kvm_hv_invalidate_tsc_page+0x3e/0xa0 [kvm]

  stack backtrace:
  CPU: 3 PID: 8318 Comm: hyperv_clock Not tainted 5.13.0-rc1 #4
  Call Trace:
   dump_stack+0x87/0xb7
   lockdep_rcu_suspicious+0xce/0xf0
   kvm_write_guest_page+0x1c1/0x1d0 [kvm]
   kvm_write_guest+0x50/0x90 [kvm]
   kvm_hv_invalidate_tsc_page+0x79/0xa0 [kvm]
   kvm_gen_update_masterclock+0x1d/0x110 [kvm]
   kvm_arch_vm_ioctl+0x2a7/0xc50 [kvm]
   kvm_vm_ioctl+0x123/0x11d0 [kvm]
   __x64_sys_ioctl+0x3ed/0x9d0
   do_syscall_64+0x3d/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xae

kvm_memslots() will be called by kvm_write_guest(), so we should take the srcu lock.

Fixes: e880c6ea5 (KVM: x86: hyper-v: Prevent using not-yet-updated TSC page by secondary CPUs)
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1621339235-11131-4-git-send-email-wanpengli@tencent.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-27 07:45:53 -04:00
Wanpeng Li
1eff0ada88 KVM: X86: Fix vCPU preempted state from guest's point of view
Commit 66570e966d (kvm: x86: only provide PV features if enabled in guest's
CPUID) avoids to access pv tlb shootdown host side logic when this pv feature
is not exposed to guest, however, kvm_steal_time.preempted not only leveraged
by pv tlb shootdown logic but also mitigate the lock holder preemption issue.
From guest's point of view, vCPU is always preempted since we lose the reset
of kvm_steal_time.preempted before vmentry if pv tlb shootdown feature is not
exposed. This patch fixes it by clearing kvm_steal_time.preempted before
vmentry.

Fixes: 66570e966d (kvm: x86: only provide PV features if enabled in guest's CPUID)
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1621339235-11131-3-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-27 07:45:53 -04:00
Wanpeng Li
72b268a8e9 KVM: X86: Bail out of direct yield in case of under-committed scenarios
In case of under-committed scenarios, vCPUs can be scheduled easily;
kvm_vcpu_yield_to adds extra overhead, and it is also common to see
when vcpu->ready is true but yield later failing due to p->state is
TASK_RUNNING.

Let's bail out in such scenarios by checking the length of current cpu
runqueue, which can be treated as a hint of under-committed instead of
guarantee of accuracy. 30%+ of directed-yield attempts can now avoid
the expensive lookups in kvm_sched_yield() in an under-committed scenario.

Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1621339235-11131-2-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-27 07:45:52 -04:00
Wanpeng Li
6bd5b74368 KVM: PPC: exit halt polling on need_resched()
This is inspired by commit 262de4102c (kvm: exit halt polling on
need_resched() as well). Due to PPC implements an arch specific halt
polling logic, we have to the need_resched() check there as well. This
patch adds a helper function that can be shared between book3s and generic
halt-polling loops.

Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Venkatesh Srinivas <venkateshs@chromium.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Venkatesh Srinivas <venkateshs@chromium.org>
Cc: Jim Mattson <jmattson@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1621339235-11131-1-git-send-email-wanpengli@tencent.com>
[Make the function inline. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-27 07:45:50 -04:00
Yang Yingliang
5d8db38ad7 thermal/drivers/qcom: Fix error code in adc_tm5_get_dt_channel_data()
Return -EINVAL when args is invalid instead of 'ret' which is set to
zero by a previous successful call to a function.

Fixes: ca66dca5ed ("thermal: qcom: add support for adc-tm5 PMIC thermal monitor")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210527092640.2070555-1-yangyingliang@huawei.com
2021-05-27 11:38:34 +02:00
Marc Zyngier
66e94d5caf KVM: arm64: Prevent mixed-width VM creation
It looks like we have tolerated creating mixed-width VMs since...
forever. However, that was never the intention, and we'd rather
not have to support that pointless complexity.

Forbid such a setup by making sure all the vcpus have the same
register width.

Reported-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210524170752.1549797-1-maz@kernel.org
2021-05-27 10:34:33 +01:00
Zenghui Yu
e3e880bb15 KVM: arm64: Resolve all pending PC updates before immediate exit
Commit 26778aaa13 ("KVM: arm64: Commit pending PC adjustemnts before
returning to userspace") fixed the PC updating issue by forcing an explicit
synchronisation of the exception state on vcpu exit to userspace.

However, we forgot to take into account the case where immediate_exit is
set by userspace and KVM_RUN will exit immediately. Fix it by resolving all
pending PC updates before returning to userspace.

Since __kvm_adjust_pc() relies on a loaded vcpu context, I moved the
immediate_exit checking right after vcpu_load(). We will get some overhead
if immediate_exit is true (which should hopefully be rare).

Fixes: 26778aaa13 ("KVM: arm64: Commit pending PC adjustemnts before returning to userspace")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210526141831.1662-1-yuzenghui@huawei.com
Cc: stable@vger.kernel.org # 5.11
2021-05-27 10:33:06 +01:00
Jeremy Szu
50dbfae972 ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 17 G8
The HP ZBook Studio 17.3 Inch G8 is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
In the other hand, there is no output from right channel of speaker.
Therefore, add a quirk to make it works.

Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210519170357.58410-4-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-27 08:13:31 +02:00
Jeremy Szu
e650c1a959 ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 15 G8
The HP ZBook Fury 15.6 Inch G8 is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
In the other hand, there is no output from right channel of speaker.
Therefore, add a quirk to make it works.

Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210519170357.58410-3-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-27 08:13:08 +02:00
Jeremy Szu
bbe183e078 ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook G8
The HP ZBook Studio 15.6 Inch G8 is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
In the other hand, there is no output from right channel of speaker.
Therefore, add a quirk to make it works.

Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210519170357.58410-2-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-27 08:12:49 +02:00
Jeremy Szu
0e68c4b11f ALSA: hda/realtek: fix mute/micmute LEDs for HP 855 G8
The HP EliteBook 855 G8 Notebook PC is using ALC285 codec which needs
ALC285_FIXUP_HP_MUTE_LED fixup to make it works. After applying the
fixup, the mute/micmute LEDs work good.

Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210519170357.58410-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-27 08:12:25 +02:00
Linus Torvalds
d7c5303fbc Networking fixes for 5.13-rc4, including fixes from bpf, netfilter,
can and wireless trees. Notably including fixes for the recently
 announced "FragAttacks" WiFi vulnerabilities. Rather large batch,
 touching some core parts of the stack, too, but nothing hair-raising.
 
 Current release - regressions:
 
  - tipc: make node link identity publish thread safe
 
  - dsa: felix: re-enable TAS guard band mode
 
  - stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()
 
  - stmmac: fix system hang if change mac address after interface ifdown
 
 Current release - new code bugs:
 
  - mptcp: avoid OOB access in setsockopt()
 
  - bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers
 
  - ethtool: stats: fix a copy-paste error - init correct array size
 
 Previous releases - regressions:
 
  - sched: fix packet stuck problem for lockless qdisc
 
  - net: really orphan skbs tied to closing sk
 
  - mlx4: fix EEPROM dump support
 
  - bpf: fix alu32 const subreg bound tracking on bitwise operations
 
  - bpf: fix mask direction swap upon off reg sign change
 
  - bpf, offload: reorder offload callback 'prepare' in verifier
 
  - stmmac: Fix MAC WoL not working if PHY does not support WoL
 
  - packetmmap: fix only tx timestamp on request
 
  - tipc: skb_linearize the head skb when reassembling msgs
 
 Previous releases - always broken:
 
  - mac80211: address recent "FragAttacks" vulnerabilities
 
  - mac80211: do not accept/forward invalid EAPOL frames
 
  - mptcp: avoid potential error message floods
 
  - bpf, ringbuf: deny reserve of buffers larger than ringbuf to prevent
                  out of buffer writes
 
  - bpf: forbid trampoline attach for functions with variable arguments
 
  - bpf: add deny list of functions to prevent inf recursion of tracing
         programs
 
  - tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT
 
  - can: isotp: prevent race between isotp_bind() and isotp_setsockopt()
 
  - netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check,
               fallback to non-AVX2 version
 
 Misc:
 
  - bpf: add kconfig knob for disabling unpriv bpf by default
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmCuy2gACgkQMUZtbf5S
 IruE5BAAhihia5EaiV71Bz/Cqr/d+osv5u283riKT8kBft0bWFVFFnT3iweWyR0/
 5X+bB6zmr80Cuqh45ZeYyq+zJtiAAlsbD5hqBIGdMriSWLxciNKjVJRzuEjuqnek
 USMW/LqGyf4NhmLogmQKpx8XcKSG7VYuK7vPrsH8us1dL5vIssceIXn8R9Dzj9NN
 P77K5Z+Oka8XQJgetNLxR3tDAM/92RwIshotkhJbRwgiUvzb+wbnrnSOAZCIPgku
 ydJyOxOklln1Sx07SejgzEl33ri0CkioDPThBWpOn7Mu0JrYKukXPKludoZcRYuJ
 2jNLYfbH0ZS5EkOfk89h7j7MDoAJMUK72M+S1w5DEYz6eH2EjhAq9noZ6E1iQH+U
 9vfoIvQjPh6Zhyk5QeM4dpt0cvR7rSElXkLVxo/x0dSBAi2rIng1bKeCUtv2J689
 CsoD0oghtEzvUTYVxY6iNr15OFGl6KsZv4tVQ709gGA36sDlK8ozGbJH5WReobBl
 f8H2WJlj2tVW5V75yUoio8TumDw34yk/5xlJFzm9GOwkqBrUcqOraHtHdUIsa4qr
 KbELQQ9QVt4zYdLAiWy5BL/QLycp0ibmA1IB8W1bxEVSK1JXzREHzPxv85KOfZkn
 8+vzNHmk2PEZYYsExiEykc5jXKOCPs8L0rJ6p4OverlbpDZcwIg=
 =peMK
 -----END PGP SIGNATURE-----

Merge tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.13-rc4, including fixes from bpf, netfilter,
  can and wireless trees. Notably including fixes for the recently
  announced "FragAttacks" WiFi vulnerabilities. Rather large batch,
  touching some core parts of the stack, too, but nothing hair-raising.

  Current release - regressions:

   - tipc: make node link identity publish thread safe

   - dsa: felix: re-enable TAS guard band mode

   - stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()

   - stmmac: fix system hang if change mac address after interface
     ifdown

  Current release - new code bugs:

   - mptcp: avoid OOB access in setsockopt()

   - bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers

   - ethtool: stats: fix a copy-paste error - init correct array size

  Previous releases - regressions:

   - sched: fix packet stuck problem for lockless qdisc

   - net: really orphan skbs tied to closing sk

   - mlx4: fix EEPROM dump support

   - bpf: fix alu32 const subreg bound tracking on bitwise operations

   - bpf: fix mask direction swap upon off reg sign change

   - bpf, offload: reorder offload callback 'prepare' in verifier

   - stmmac: Fix MAC WoL not working if PHY does not support WoL

   - packetmmap: fix only tx timestamp on request

   - tipc: skb_linearize the head skb when reassembling msgs

  Previous releases - always broken:

   - mac80211: address recent "FragAttacks" vulnerabilities

   - mac80211: do not accept/forward invalid EAPOL frames

   - mptcp: avoid potential error message floods

   - bpf, ringbuf: deny reserve of buffers larger than ringbuf to
     prevent out of buffer writes

   - bpf: forbid trampoline attach for functions with variable arguments

   - bpf: add deny list of functions to prevent inf recursion of tracing
     programs

   - tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT

   - can: isotp: prevent race between isotp_bind() and
     isotp_setsockopt()

   - netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check,
     fallback to non-AVX2 version

  Misc:

   - bpf: add kconfig knob for disabling unpriv bpf by default"

* tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits)
  net: phy: Document phydev::dev_flags bits allocation
  mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer
  mptcp: avoid error message on infinite mapping
  mptcp: drop unconditional pr_warn on bad opt
  mptcp: avoid OOB access in setsockopt()
  nfp: update maintainer and mailing list addresses
  net: mvpp2: add buffer header handling in RX
  bnx2x: Fix missing error code in bnx2x_iov_init_one()
  net: zero-initialize tc skb extension on allocation
  net: hns: Fix kernel-doc
  sctp: fix the proc_handler for sysctl encap_port
  sctp: add the missing setting for asoc encap_port
  bpf, selftests: Adjust few selftest result_unpriv outcomes
  bpf: No need to simulate speculative domain for immediates
  bpf: Fix mask direction swap upon off reg sign change
  bpf: Wrap aux data inside bpf_sanitize_info container
  bpf: Fix BPF_LSM kconfig symbol dependency
  selftests/bpf: Add test for l3 use of bpf_redirect_peer
  bpftool: Add sock_release help info for cgroup attach/prog load command
  net: dsa: microchip: enable phy errata workaround on 9567
  ...
2021-05-26 17:44:49 -10:00
Vasily Gorbik
ffa99c436a Avoid some races in vfio-ccw request handling.
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEw9DWbcNiT/aowBjO3s9rk8bwL68FAmCmRbUSHGNvaHVja0By
 ZWRoYXQuY29tAAoJEN7Pa5PG8C+vfskP/2dRytW+PLjA4DSv0rQLa6Q/Z/HPZqI7
 Ef9r2/GPUeYwmCkZ5l7lOn6NQrB0qgb0eo1vkO2qvIbtCEUvYk4x6t6IJNn30bkE
 V/DjdCDrR7yrzkHASXBwpJ0wV2NkT55bWndtYI85aN7T/5JKRtUoT8MSaWFZG2Eq
 dTsZVUMO1ZskXWklWKbXf1C/MgTnOnLVnwpzQocR2Pgx+kUFZK3qClzMhVLKlL+R
 joyfLQoMImoPre7/x+PpweWujpXYgnMt+bNYAON6FoWQGq3vMuWJ7WEc+MI7chVd
 sULsV3d6m/D8vjY9P4+Z6K55zTq4gGyGb/DsOhHd39LqfiV6LxUNQt5WNHVRKlA3
 2MmtEbQU01ewCmfJbhi+pOfyEkWf1rk5fOG1xPiqeUi3dOEbL0tSBq5EztbPPPIi
 DG7uR+h/w+QJ3wD3c+xiO1AEYyFcWwXtK6FKhncRv4n3XOMXMhjt7ry27Xx8tywp
 Z2vYdHcCR3b+dU8uCXlIySqkAUvKrNLK4f6ZPGytwcrGTl8EmGLVjqV16K270+NR
 gKJRbOSd88wpKjHbgSVix9QihTK7RSohboL50QlZ3koBe7Q99U3NIXiFrhwoATS6
 GibdGIY4Mcca2MeiQd1lDPYOnZ9/+174z/49tenfWDcx09kywAteGb8ByAtEil+O
 Hv3DNUI5ZSRt
 =KSlG
 -----END PGP SIGNATURE-----

Merge tag 'vfio-ccw-20210520' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into fixes

Avoid some races in vfio-ccw request handling.

* tag 'vfio-ccw-20210520' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw:
  vfio-ccw: Serialize FSM IDLE state with I/O completion
  vfio-ccw: Reset FSM state to IDLE inside FSM
  vfio-ccw: Check initialized flag in cp_init()

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-05-26 23:46:34 +02:00
Florian Fainelli
62f3415db2 net: phy: Document phydev::dev_flags bits allocation
Document the phydev::dev_flags bit allocation to allow bits 15:0 to
define PHY driver specific behavior, bits 23:16 to be reserved for now,
and bits 31:24 to hold generic PHY driver flags.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20210526184617.3105012-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-26 13:15:55 -07:00
Linus Torvalds
7ac3a1c1ae MTD parsers:
* ofpart:
   - Fix subpartitions parsing
 
 Raw NAND:
 * txx9ndfmc, tmio, sharpsl, ndfc, lpc32xx_slc, fsmc, cs553x:
   - Fix external use of SW Hamming ECC helper
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmCub1YACgkQJWrqGEe9
 VoRNjggAwS+JnOrC/cJjmytLG16wZweSvGSxwNM37E3wT6IpdHgyiehJ4hKlyKwF
 SG1r+E1h8+nY75znwJXJuP0Soj1PZIf0YG44fL5FnVh9zL19MCjb6oaF0ZqoyIqh
 8QAqBH7PBdLGHs5WpSWvzYpPjxk8qjNpVcYsi/KtF7VNys0iTW3zBSf0S62KEkyE
 WPLcT+1gpdyDSWwx+SyTxq4NKpC0gVFV9VtwUR5d6a9Y4ZwNRPhN4Od1etgrurUN
 pJ2Mw2eSBvnPSntaR0oPFUNFwliazgAKK/Jkm7hygv8MNH5nFqwVKkVuTUeKmdIl
 tHpBYP0X01bRf/MqsS51CyIKEc1fzw==
 =2HR/
 -----END PGP SIGNATURE-----

Merge tag 'mtd/fixes-for-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD fixes from Miquel Raynal:
 "MTD parsers:
   - Fix ofpart subpartitions parsing

  Raw NAND:
   - Fix external use of SW Hamming ECC helper (txx9ndfmc, tmio,
     sharpsl, ndfc, lpc32xx_slc, fsmc, cs553x)"

* tag 'mtd/fixes-for-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: parsers: ofpart: fix parsing subpartitions
  mtd: rawnand: txx9ndfmc: Fix external use of SW Hamming ECC helper
  mtd: rawnand: tmio: Fix external use of SW Hamming ECC helper
  mtd: rawnand: sharpsl: Fix external use of SW Hamming ECC helper
  mtd: rawnand: ndfc: Fix external use of SW Hamming ECC helper
  mtd: rawnand: lpc32xx_slc: Fix external use of SW Hamming ECC helper
  mtd: rawnand: fsmc: Fix external use of SW Hamming ECC helper
  mtd: rawnand: cs553x: Fix external use of SW Hamming ECC helper
2021-05-26 06:09:23 -10:00
Darrick J. Wong
9f5815315e xfs: add new IRC channel to MAINTAINERS
Add our new OFTC channel to the MAINTAINERS list so everyone will know
where to go.  Ignore the XFS wikis, we have no access to them.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
2021-05-26 08:35:38 -07:00
Zqiang
3743c1723b io-wq: Fix UAF when wakeup wqe in hash waitqueue
BUG: KASAN: use-after-free in __wake_up_common+0x637/0x650
Read of size 8 at addr ffff8880304250d8 by task iou-wrk-28796/28802

Call Trace:
 __dump_stack [inline]
 dump_stack+0x141/0x1d7
 print_address_description.constprop.0.cold+0x5b/0x2c6
 __kasan_report [inline]
 kasan_report.cold+0x7c/0xd8
 __wake_up_common+0x637/0x650
 __wake_up_common_lock+0xd0/0x130
 io_worker_handle_work+0x9dd/0x1790
 io_wqe_worker+0xb2a/0xd40
 ret_from_fork+0x1f/0x30

Allocated by task 28798:
 kzalloc_node [inline]
 io_wq_create+0x3c4/0xdd0
 io_init_wq_offload [inline]
 io_uring_alloc_task_context+0x1bf/0x6b0
 __io_uring_add_task_file+0x29a/0x3c0
 io_uring_add_task_file [inline]
 io_uring_install_fd [inline]
 io_uring_create [inline]
 io_uring_setup+0x209a/0x2bd0
 do_syscall_64+0x3a/0xb0
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Freed by task 28798:
 kfree+0x106/0x2c0
 io_wq_destroy+0x182/0x380
 io_wq_put [inline]
 io_wq_put_and_exit+0x7a/0xa0
 io_uring_clean_tctx [inline]
 __io_uring_cancel+0x428/0x530
 io_uring_files_cancel
 do_exit+0x299/0x2a60
 do_group_exit+0x125/0x310
 get_signal+0x47f/0x2150
 arch_do_signal_or_restart+0x2a8/0x1eb0
 handle_signal_work[inline]
 exit_to_user_mode_loop [inline]
 exit_to_user_mode_prepare+0x171/0x280
 __syscall_exit_to_user_mode_work [inline]
 syscall_exit_to_user_mode+0x19/0x60
 do_syscall_64+0x47/0xb0
 entry_SYSCALL_64_after_hwframe

There are the following scenarios, hash waitqueue is shared by
io-wq1 and io-wq2. (note: wqe is worker)

io-wq1:worker2     | locks bit1
io-wq2:worker1     | waits bit1
io-wq1:worker3     | waits bit1

io-wq1:worker2     | completes all wqe bit1 work items
io-wq1:worker2     | drop bit1, exit

io-wq2:worker1     | locks bit1
io-wq1:worker3     | can not locks bit1, waits bit1 and exit
io-wq1             | exit and free io-wq1
io-wq2:worker1     | drops bit1
io-wq1:worker3     | be waked up, even though wqe is freed

After all iou-wrk belonging to io-wq1 have exited, remove wqe
form hash waitqueue, it is guaranteed that there will be no more
wqe belonging to io-wq1 in the hash waitqueue.

Reported-by: syzbot+6cb11ade52aa17095297@syzkaller.appspotmail.com
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Link: https://lore.kernel.org/r/20210526050826.30500-1-qiang.zhang@windriver.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-26 09:03:56 -06:00
Jens Axboe
094c271add Merge branch 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-5.13
Pull MD fix from Song.

* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md/raid5: remove an incorrect assert in in_chunk_boundary
2021-05-26 08:47:51 -06:00
Sagi Grimberg
aaeadd7075 nvmet: fix false keep-alive timeout when a controller is torn down
Controller teardown flow may take some time in case it has many I/O
queues, and the host may not send us keep-alive during this period.
Hence reset the traffic based keep-alive timer so we don't trigger
a controller teardown as a result of a keep-alive expiration.

Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-05-26 16:18:22 +02:00
Hou Pu
25df1acd2d nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response
Using "<=" instead "<" to compare inline data size.

Fixes: bdaf132791 ("nvmet-tcp: fix a segmentation fault during io parsing error")
Signed-off-by: Hou Pu <houpu.main@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-05-26 16:18:22 +02:00
Sagi Grimberg
042a3eaad6 nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME
We need to select NVME_CORE.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-05-26 16:18:22 +02:00
Felix Fietkau
75ea44e356 perf jevents: Fix getting maximum number of fds
On some hosts, rlim.rlim_max can be returned as RLIM_INFINITY.
By casting it to int, it is interpreted as -1, which will cause get_maxfds
to return 0, causing "Invalid argument" errors in nftw() calls.
Fix this by casting the second argument of min() to rlim_t instead.

Fixes: 80eeb67fe5 ("perf jevents: Program to convert JSON file")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lore.kernel.org/lkml/20210525160758.97829-1-nbd@nbd.name
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-26 10:49:28 -03:00
xinhui pan
35f819d218 drm/ttm: Skip swapout if ttm object is not populated
Swapping a ttm object which has no backend pages makes no sense.

Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210521083112.33176-1-xinhui.pan@amd.com
CC: stable@kernel.org
Signed-off-by: Christian König <christian.koenig@amd.com>
2021-05-26 15:02:47 +02:00
Trond Myklebust
70536bf4eb NFS: Clean up reset of the mirror accounting variables
Now that nfs_pageio_do_add_request() resets the pg_count, we don't need
these other inlined resets.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-05-26 06:36:13 -04:00
Trond Myklebust
0d0ea30935 NFS: Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
The value of mirror->pg_bytes_written should only be updated after a
successful attempt to flush out the requests on the list.

Fixes: a7d42ddb30 ("nfs: add mirroring support to pgio layer")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-05-26 06:36:13 -04:00
Trond Myklebust
56517ab958 NFS: Fix an Oopsable condition in __nfs_pageio_add_request()
Ensure that nfs_pageio_error_cleanup() resets the mirror array contents,
so that the structure reflects the fact that it is now empty.
Also change the test in nfs_pageio_do_add_request() to be more robust by
checking whether or not the list is empty rather than relying on the
value of pg_count.

Fixes: a7d42ddb30 ("nfs: add mirroring support to pgio layer")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-05-26 06:36:13 -04:00
Trond Myklebust
e86be3a04b SUNRPC: More fixes for backlog congestion
Ensure that we fix the XPRT_CONGESTED starvation issue for RDMA as well
as socket based transports.
Ensure we always initialise the request after waking up from the backlog
list.

Fixes: e877a88d1f ("SUNRPC in case of backlog, hand free slots directly to waiting task")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-05-26 06:36:13 -04:00
Pavel Begunkov
17a91051fe io_uring/io-wq: close io-wq full-stop gap
There is an old problem with io-wq cancellation where requests should be
killed and are in io-wq but are not discoverable, e.g. in @next_hashed
or @linked vars of io_worker_handle_work(). It adds some unreliability
to individual request canellation, but also may potentially get
__io_uring_cancel() stuck. For instance:

1) An __io_uring_cancel()'s cancellation round have not found any
   request but there are some as desribed.
2) __io_uring_cancel() goes to sleep
3) Then workers wake up and try to execute those hidden requests
   that happen to be unbound.

As we already cancel all requests of io-wq there, set IO_WQ_BIT_EXIT
in advance, so preventing 3) from executing unbound requests. The
workers will initially break looping because of getting a signal as they
are threads of the dying/exec()'ing user task.

Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/abfcf8c54cb9e8f7bfbad7e9a0cc5433cc70bdc2.1621781238.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-25 19:39:58 -06:00
Christoph Hellwig
cc14626791 md/raid5: remove an incorrect assert in in_chunk_boundary
Now that the original bdev is stored in the bio this assert is incorrect
and will trigger for any partitioned raid5 device.

Reported-by: Florian Dazinger <spam02@dazinger.net>
Tested-by: Florian Dazinger <spam02@dazinger.net>
Cc: stable@vger.kernel.org # 5.12
Fixes: 309dca309f ("block: store a block_device pointer in struct bio"),
Reviewed-by:  Guoqing Jiang <jiangguoqing@kylinos.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
2021-05-25 18:03:15 -07:00
David S. Miller
f5d287126f Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2021-05-26

The following pull-request contains BPF updates for your *net* tree.

We've added 14 non-merge commits during the last 14 day(s) which contain
a total of 17 files changed, 513 insertions(+), 231 deletions(-).

The main changes are:

1) Fix bpf_skb_change_head() helper to reset mac_len, from Jussi Maki.

2) Fix masking direction swap upon off-reg sign change, from Daniel Borkmann.

3) Fix BPF offloads in verifier by reordering driver callback, from Yinjun Zhang.

4) BPF selftest for ringbuf mmap ro/rw restrictions, from Andrii Nakryiko.

5) Follow-up fixes to nested bprintf per-cpu buffers, from Florent Revest.

6) Fix bpftool sock_release attach point help info, from Liu Jian.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25 15:59:24 -07:00
David S. Miller
6dfa87b492 Merge branch 'mptcp-fixes'
Mat Martineau says:

====================
MPTCP fixes

Here are a few fixes for the -net tree.

Patch 1 fixes an attempt to access a tcp-specific field that does not
exist in mptcp sockets.

Patches 2 and 3 remove warning/error log output that could be flooded.

Patch 4 performs more validation on address advertisement echo packets
to improve RFC 8684 compliance.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25 15:56:20 -07:00
Davide Caratti
d58300c318 mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer
when Linux receives an echo-ed ADD_ADDR, it checks the IP address against
the list of "announced" addresses. In case of a positive match, the timer
that handles retransmissions is stopped regardless of the 'Address Id' in
the received packet: this behaviour does not comply with RFC8684 3.4.1.

Fix it by validating the 'Address Id' in received echo-ed ADD_ADDRs.
Tested using packetdrill, with the following captured output:

 unpatched kernel:

 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0
 In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 3013740213], length 0
 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0
 In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 3013740213], length 0
        ^^^ retransmission is stopped here, but 'Address Id' is 90

 patched kernel:

 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
 In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 1672384568], length 0
 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
 In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 1672384568], length 0
 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
 In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 198.51.100.2,mptcp dss ack 1672384568], length 0
        ^^^ retransmission is stopped here, only when both 'Address Id' and 'IP Address' match

Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25 15:56:20 -07:00
Paolo Abeni
3ed0a585bf mptcp: avoid error message on infinite mapping
Another left-over. Avoid flooding dmesg with useless text,
we already have a MIB for that event.

Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25 15:56:20 -07:00
Paolo Abeni
3812ce8950 mptcp: drop unconditional pr_warn on bad opt
This is a left-over of early day. A malicious peer can flood
the kernel logs with useless messages, just drop it.

Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25 15:56:20 -07:00
Paolo Abeni
20b5759f21 mptcp: avoid OOB access in setsockopt()
We can't use tcp_set_congestion_control() on an mptcp socket, as
such function can end-up accessing a tcp-specific field -
prior_ssthresh - causing an OOB access.

To allow propagating the correct ca algo on subflow, cache the ca
name at initialization time.

Additionally avoid overriding the user-selected CA (if any) at
clone time.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/182
Fixes: aa1fbd94e5 ("mptcp: sockopt: add TCP_CONGESTION and TCP_INFO")
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25 15:56:20 -07:00
Simon Horman
bab09fe2f6 nfp: update maintainer and mailing list addresses
Some of Netronome's activities and people have moved over to Corigine,
including NFP driver maintenance and myself.

Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25 15:50:11 -07:00
Stefan Chulski
17f9c1b63c net: mvpp2: add buffer header handling in RX
If Link Partner sends frames larger than RX buffer size, MAC mark it
as oversize but still would pass it to the Packet Processor.
In this scenario, Packet Processor scatter frame between multiple buffers,
but only a single buffer would be returned to the Buffer Manager pool and
it would not refill the poll.

Patch add handling of oversize error with buffer header handling, so all
buffers would be returned to the Buffer Manager pool.

Fixes: 3f518509de ("ethernet: Add new driver for Marvell Armada 375 network unit")
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25 15:49:04 -07:00
Jiapeng Chong
65161c3555 bnx2x: Fix missing error code in bnx2x_iov_init_one()
Eliminate the follow smatch warning:

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1227
bnx2x_iov_init_one() warn: missing error code 'err'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25 15:46:53 -07:00
Vlad Buslov
9453d45ecb net: zero-initialize tc skb extension on allocation
Function skb_ext_add() doesn't initialize created skb extension with any
value and leaves it up to the user. However, since extension of type
TC_SKB_EXT originally contained only single value tc_skb_ext->chain its
users used to just assign the chain value without setting whole extension
memory to zero first. This assumption changed when TC_SKB_EXT extension was
extended with additional fields but not all users were updated to
initialize the new fields which leads to use of uninitialized memory
afterwards. UBSAN log:

[  778.299821] UBSAN: invalid-load in net/openvswitch/flow.c:899:28
[  778.301495] load of value 107 is not a valid value for type '_Bool'
[  778.303215] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7+ #2
[  778.304933] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[  778.307901] Call Trace:
[  778.308680]  <IRQ>
[  778.309358]  dump_stack+0xbb/0x107
[  778.310307]  ubsan_epilogue+0x5/0x40
[  778.311167]  __ubsan_handle_load_invalid_value.cold+0x43/0x48
[  778.312454]  ? memset+0x20/0x40
[  778.313230]  ovs_flow_key_extract.cold+0xf/0x14 [openvswitch]
[  778.314532]  ovs_vport_receive+0x19e/0x2e0 [openvswitch]
[  778.315749]  ? ovs_vport_find_upcall_portid+0x330/0x330 [openvswitch]
[  778.317188]  ? create_prof_cpu_mask+0x20/0x20
[  778.318220]  ? arch_stack_walk+0x82/0xf0
[  778.319153]  ? secondary_startup_64_no_verify+0xb0/0xbb
[  778.320399]  ? stack_trace_save+0x91/0xc0
[  778.321362]  ? stack_trace_consume_entry+0x160/0x160
[  778.322517]  ? lock_release+0x52e/0x760
[  778.323444]  netdev_frame_hook+0x323/0x610 [openvswitch]
[  778.324668]  ? ovs_netdev_get_vport+0xe0/0xe0 [openvswitch]
[  778.325950]  __netif_receive_skb_core+0x771/0x2db0
[  778.327067]  ? lock_downgrade+0x6e0/0x6f0
[  778.328021]  ? lock_acquire+0x565/0x720
[  778.328940]  ? generic_xdp_tx+0x4f0/0x4f0
[  778.329902]  ? inet_gro_receive+0x2a7/0x10a0
[  778.330914]  ? lock_downgrade+0x6f0/0x6f0
[  778.331867]  ? udp4_gro_receive+0x4c4/0x13e0
[  778.332876]  ? lock_release+0x52e/0x760
[  778.333808]  ? dev_gro_receive+0xcc8/0x2380
[  778.334810]  ? lock_downgrade+0x6f0/0x6f0
[  778.335769]  __netif_receive_skb_list_core+0x295/0x820
[  778.336955]  ? process_backlog+0x780/0x780
[  778.337941]  ? mlx5e_rep_tc_netdevice_event_unregister+0x20/0x20 [mlx5_core]
[  778.339613]  ? seqcount_lockdep_reader_access.constprop.0+0xa7/0xc0
[  778.341033]  ? kvm_clock_get_cycles+0x14/0x20
[  778.342072]  netif_receive_skb_list_internal+0x5f5/0xcb0
[  778.343288]  ? __kasan_kmalloc+0x7a/0x90
[  778.344234]  ? mlx5e_handle_rx_cqe_mpwrq+0x9e0/0x9e0 [mlx5_core]
[  778.345676]  ? mlx5e_xmit_xdp_frame_mpwqe+0x14d0/0x14d0 [mlx5_core]
[  778.347140]  ? __netif_receive_skb_list_core+0x820/0x820
[  778.348351]  ? mlx5e_post_rx_mpwqes+0xa6/0x25d0 [mlx5_core]
[  778.349688]  ? napi_gro_flush+0x26c/0x3c0
[  778.350641]  napi_complete_done+0x188/0x6b0
[  778.351627]  mlx5e_napi_poll+0x373/0x1b80 [mlx5_core]
[  778.352853]  __napi_poll+0x9f/0x510
[  778.353704]  ? mlx5_flow_namespace_set_mode+0x260/0x260 [mlx5_core]
[  778.355158]  net_rx_action+0x34c/0xa40
[  778.356060]  ? napi_threaded_poll+0x3d0/0x3d0
[  778.357083]  ? sched_clock_cpu+0x18/0x190
[  778.358041]  ? __common_interrupt+0x8e/0x1a0
[  778.359045]  __do_softirq+0x1ce/0x984
[  778.359938]  __irq_exit_rcu+0x137/0x1d0
[  778.360865]  irq_exit_rcu+0xa/0x20
[  778.361708]  common_interrupt+0x80/0xa0
[  778.362640]  </IRQ>
[  778.363212]  asm_common_interrupt+0x1e/0x40
[  778.364204] RIP: 0010:native_safe_halt+0xe/0x10
[  778.365273] Code: 4f ff ff ff 4c 89 e7 e8 50 3f 40 fe e9 dc fe ff ff 48 89 df e8 43 3f 40 fe eb 90 cc e9 07 00 00 00 0f 00 2d 74 05 62 00 fb f4 <c3> 90 e9 07 00 00 00 0f 00 2d 64 05 62 00 f4 c3 cc cc 0f 1f 44 00
[  778.369355] RSP: 0018:ffffffff84407e48 EFLAGS: 00000246
[  778.370570] RAX: ffff88842de46a80 RBX: ffffffff84425840 RCX: ffffffff83418468
[  778.372143] RDX: 000000000026f1da RSI: 0000000000000004 RDI: ffffffff8343af5e
[  778.373722] RBP: fffffbfff0884b08 R08: 0000000000000000 R09: ffff88842de46bcb
[  778.375292] R10: ffffed1085bc8d79 R11: 0000000000000001 R12: 0000000000000000
[  778.376860] R13: ffffffff851124a0 R14: 0000000000000000 R15: dffffc0000000000
[  778.378491]  ? rcu_eqs_enter.constprop.0+0xb8/0xe0
[  778.379606]  ? default_idle_call+0x5e/0xe0
[  778.380578]  default_idle+0xa/0x10
[  778.381406]  default_idle_call+0x96/0xe0
[  778.382350]  do_idle+0x3d4/0x550
[  778.383153]  ? arch_cpu_idle_exit+0x40/0x40
[  778.384143]  cpu_startup_entry+0x19/0x20
[  778.385078]  start_kernel+0x3c7/0x3e5
[  778.385978]  secondary_startup_64_no_verify+0xb0/0xbb

Fix the issue by providing new function tc_skb_ext_alloc() that allocates
tc skb extension and initializes its memory to 0 before returning it to the
caller. Change all existing users to use new API instead of calling
skb_ext_add() directly.

Fixes: 038ebb1a71 ("net/sched: act_ct: fix miss set mru for ovs after defrag in act_ct")
Fixes: d29334c15d ("net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ct")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25 15:36:42 -07:00
Yang Li
c1cf1afd8b net: hns: Fix kernel-doc
Fix function name in hns_ethtool.c kernel-doc comment
to remove these warnings found by clang_w1.

drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:202: warning: expecting
prototype for hns_nic_set_link_settings(). Prototype was for
hns_nic_set_link_ksettings() instead.
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:837: warning: expecting
prototype for get_ethtool_stats(). Prototype was for
hns_get_ethtool_stats() instead.
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:894: warning:
expecting prototype for get_strings(). Prototype was for
hns_get_strings() instead.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 'commit 262b38cdb3 ("net: ethernet: hisilicon: hns: use phydev
from struct net_device")'
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25 15:26:47 -07:00
Xin Long
b2540cdce6 sctp: fix the proc_handler for sysctl encap_port
proc_dointvec() cannot do min and max check for setting a value
when extra1/extra2 is set, so change it to proc_dointvec_minmax()
for sysctl encap_port.

Fixes: e8a3001c21 ("sctp: add encap_port for netns sock asoc and transport")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25 15:18:29 -07:00
Xin Long
297739bd73 sctp: add the missing setting for asoc encap_port
This patch is to add the missing setting back for asoc encap_port.

Fixes: 8dba29603b ("sctp: add SCTP_REMOTE_UDP_ENCAPS_PORT sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25 15:17:26 -07:00
Kees Cook
bfb819ea20 proc: Check /proc/$pid/attr/ writes against file opener
Fix another "confused deputy" weakness[1]. Writes to /proc/$pid/attr/
files need to check the opener credentials, since these fds do not
transition state across execve(). Without this, it is possible to
trick another process (which may have different credentials) to write
to its own /proc/$pid/attr/ files, leading to unexpected and possibly
exploitable behaviors.

[1] https://www.kernel.org/doc/html/latest/security/credentials.html?highlight=confused#open-file-credentials

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-25 10:24:41 -10:00