Just use xa_for_each to iterate over the partitions as there is no need
to grab a reference to each partition.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406062303.811835-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Always look up the first available entry instead of the complicated
stateful traversal.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406062303.811835-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is nothing preventing an ioctl from trying do delete partition
concurrenly with del_gendisk, so take open_mutex to serialize against
that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406062303.811835-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the busy check and disk-wide sync into the only caller, so that
the remainder can be shared with del_gendisk. Also pass the gendisk
instead of the bdev as that is all that is needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406062303.811835-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the calls to fsync_bdev and __invalidate_device from del_gendisk to
delete_partition. For the other two callers that check that there are
no openers for the delete partitions(s) the callouts are a no-op as no
file system can be mounted, but this keeps all the cleanup in one
place.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210406062303.811835-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the more general interface - the behavior is the same except
that now a change uevent is sent, which is the right thing to do
when the device becomes unusable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20210406062303.811835-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit a33df75c63 ("block: use an xarray for disk->part_tbl") drops the
check on max supported number of partitionsr, and allows partition with
bigger partition numbers to be added. However, ->bd_partno is defined as
u8, so partition index of xarray table may not match with ->bd_partno.
Then delete_partition() may delete one unmatched partition, and caused
use-after-free.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: syzbot+8fede7e30c7cee0de139@syzkaller.appspotmail.com
Fixes: a33df75c63 ("block: use an xarray for disk->part_tbl")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the removal of the skd driver, using IRQ safe locking of a bdev
bd_size_lock spinlock to protect the bdev inode size is not necessary
anymore as there is no other known driver using this lock under an IRQ
disabled context (e.g. calling set_capacity() with IRQ disabled).
Revert commit 0fe37724f8 ("block: fix bd_size_lock use") which
introduced the IRQ safe change.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=os1E
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"Another nice round of removing more code than what is added, mostly
due to Christoph's relentless pursuit of tech debt removal/cleanups.
This pull request contains:
- Two series of BFQ improvements (Paolo, Jan, Jia)
- Block iov_iter improvements (Pavel)
- bsg error path fix (Pan)
- blk-mq scheduler improvements (Jan)
- -EBUSY discard fix (Jan)
- bvec allocation improvements (Ming, Christoph)
- bio allocation and init improvements (Christoph)
- Store bdev pointer in bio instead of gendisk + partno (Christoph)
- Block trace point cleanups (Christoph)
- hard read-only vs read-only split (Christoph)
- Block based swap cleanups (Christoph)
- Zoned write granularity support (Damien)
- Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)"
* tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits)
mm: simplify swapdev_block
sd_zbc: clear zone resources for non-zoned case
block: introduce blk_queue_clear_zone_settings()
zonefs: use zone write granularity as block size
block: introduce zone_write_granularity limit
block: use blk_queue_set_zoned in add_partition()
nullb: use blk_queue_set_zoned() to setup zoned devices
nvme: cleanup zone information initialization
block: document zone_append_max_bytes attribute
block: use bi_max_vecs to find the bvec pool
md/raid10: remove dead code in reshape_request
block: mark the bio as cloned in bio_iov_bvec_set
block: set BIO_NO_PAGE_REF in bio_iov_bvec_set
block: remove a layer of indentation in bio_iov_iter_get_pages
block: turn the nr_iovecs argument to bio_alloc* into an unsigned short
block: remove the 1 and 4 vec bvec_slabs entries
block: streamline bvec_alloc
block: factor out a bvec_alloc_gfp helper
block: move struct biovec_slab to bio.c
block: reuse BIO_INLINE_VECS for integrity bvecs
...
When changing the zoned model of host-aware zoned block devices, use
blk_queue_set_zoned() instead of directly assigning the gendisk queue
zoned limit.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@edc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some block device drivers, e.g. the skd driver, call set_capacity() with
IRQ disabled. This results in lockdep ito complain about inconsistent
lock states ("inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage")
because set_capacity takes a block device bd_size_lock using the
functions spin_lock() and spin_unlock(). Ensure a consistent locking
state by replacing these calls with spin_lock_irqsave() and
spin_lock_irqrestore(). The same applies to bdev_set_nr_sectors().
With this fix, all lockdep complaints are resolved.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Once we have called device_initialize(), we should use put_device() to
give up the reference on error, just like what we have done on failure
of device_add().
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that no fast path lookups in the partition table are left, there is
no point in micro-optimizing the data structure for it. Just use a bog
standard xarray.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 20bd1d026a ("scsi: sd: Keep disk read-only when re-reading
partition") addressed a long-standing problem with user read-only
policy being overridden as a result of a device-initiated revalidate.
The commit has since been reverted due to a regression that left some
USB devices read-only indefinitely.
To fix the underlying problems with revalidate we need to keep track
of hardware state and user policy separately.
The gendisk has been updated to reflect the current hardware state set
by the device driver. This is done to allow returning the device to
the hardware state once the user clears the BLKROSET flag.
The resulting semantics are as follows:
- If BLKROSET sets a given partition read-only, that partition will
remain read-only even if the underlying storage stack initiates a
revalidate. However, the BLKRRPART ioctl will cause the partition
table to be dropped and any user policy on partitions will be lost.
- If BLKROSET has not been set, both the whole disk device and any
partitions will reflect the current write-protect state of the
underlying device.
Based on a patch from Martin K. Petersen <martin.petersen@oracle.com>.
Reported-by: Oleksii Kurochko <olkuroch@cisco.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201221
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Update copyrights for files that have gotten some major rewrites lately.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of having two structures that represent each block device with
different life time rules, merge them into a single one. This also
greatly simplifies the reference counting rules, as we can use the inode
reference count as the main reference count for the new struct
block_device, with the device model reference front ending it for device
model interaction.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch the partition iter infrastructure to iterate over block_device
references instead of hd_struct ones mostly used to get at the
block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the block_device actually needed instead of the hd_struct.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use the bd_partno field in struct block_device everywhere.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use struct block_device to lookup partitions on a disk. This removes
all usage of struct hd_struct from the I/O path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allocate hd_struct together with struct block_device to pre-load
the lifetime rule changes in preparation of merging the two structures.
Note that part0 was previously embedded into struct gendisk, but is
a separate allocation now, and already points to the block_device instead
of the hd_struct. The lifetime of struct gendisk is still controlled by
the struct device embedded in the part0 hd_struct.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the policy field to struct block_device and rename it to the
more descriptive bd_read_only. Also turn the field into a bool as it
is used as such.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the holder_dir field to struct block_device in preparation for
kill struct hd_struct.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the partition_meta_info to struct block_device in preparation for
killing struct hd_struct.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the start_sect field to struct block_device in preparation
of killing struct hd_struct.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the dkstats and stamp field to struct block_device in preparation
of killing struct hd_struct.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that the hd_struct always has a block device attached to it, there is
no need for having two size field that just get out of sync.
Additionally the field in hd_struct did not use proper serialization,
possibly allowing for torn writes. By only using the block_device field
this problem also gets fixed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To simplify block device lookup and a few other upcoming areas, make sure
that we always have a struct block_device available for each disk and
each partition, and only find existing block devices in bdget. The only
downside of this is that each device and partition uses a little more
memory. The upside will be that a lot of code can be simplified.
With that all we need to look up the block device is to lookup the inode
and do a few sanity checks on the gendisk, instead of the separate lookup
for the gendisk. For blk-cgroup which wants to access a gendisk without
opening it, a new blkdev_{get,put}_no_open low-level interface is added
to replace the previous get_gendisk use.
Note that the change to look up block device directly instead of the two
step lookup using struct gendisk causes a subtile change in behavior:
accessing a non-existing partition on an existing block device can now
cause a call to request_module. That call is harmless, and in practice
no recent system will access these nodes as they aren't created by udev
and static /dev/ setups are unusual.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=LzyE
-----END PGP SIGNATURE-----
Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Series of merge handling cleanups (Baolin, Christoph)
- Series of blk-throttle fixes and cleanups (Baolin)
- Series cleaning up BDI, seperating the block device from the
backing_dev_info (Christoph)
- Removal of bdget() as a generic API (Christoph)
- Removal of blkdev_get() as a generic API (Christoph)
- Cleanup of is-partition checks (Christoph)
- Series reworking disk revalidation (Christoph)
- Series cleaning up bio flags (Christoph)
- bio crypt fixes (Eric)
- IO stats inflight tweak (Gabriel)
- blk-mq tags fixes (Hannes)
- Buffer invalidation fixes (Jan)
- Allow soft limits for zone append (Johannes)
- Shared tag set improvements (John, Kashyap)
- Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel)
- DM no-wait support (Mike, Konstantin)
- Request allocation improvements (Ming)
- Allow md/dm/bcache to use IO stat helpers (Song)
- Series improving blk-iocost (Tejun)
- Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang,
Xianting, Yang, Yufen, yangerkun)
* tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits)
block: fix uapi blkzoned.h comments
blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue
blk-mq: get rid of the dead flush handle code path
block: get rid of unnecessary local variable
block: fix comment and add lockdep assert
blk-mq: use helper function to test hw stopped
block: use helper function to test queue register
block: remove redundant mq check
block: invoke blk_mq_exit_sched no matter whether have .exit_sched
percpu_ref: don't refer to ref->data if it isn't allocated
block: ratelimit handle_bad_sector() message
blk-throttle: Re-use the throtl_set_slice_end()
blk-throttle: Open code __throtl_de/enqueue_tg()
blk-throttle: Move service tree validation out of the throtl_rb_first()
blk-throttle: Move the list operation after list validation
blk-throttle: Fix IO hang for a corner case
blk-throttle: Avoid tracking latency if low limit is invalid
blk-throttle: Avoid getting the current time if tg->last_finish_time is 0
blk-throttle: Remove a meaningless parameter for throtl_downgrade_state()
block: Remove redundant 'return' statement
...
Don't error out if the dasd_biodasdinfo symbol is not available.
Cc: stable@vger.kernel.org
Fixes: 26d7e28e38 ("s390/dasd: remove ioctl_by_bdev calls")
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All remaining callers of bdget() outside of fs/block_dev.c want to get a
reference to the struct block_device for a given struct hd_struct. Add
a helper just for that and then mark bdget static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
mdadm relies on the fact that deleting an invalid partition returns
-ENXIO or -ENOTTY to detect if a block device is a partition or a
whole device.
Fixes: 08fc1ab6d7 ("block: fix locking in bdev_del_partition")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The alignment offset is only used in slow path callers, so just calculate
it on the fly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The alignment offset is only used in slow path callers, so just calculate
it on the fly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Two different callers use two different mutexes for updating the
block device size, which obviously doesn't help to actually protect
against concurrent updates from the different callers. In addition
one of the locks, bd_mutex is rather prone to deadlocks with other
parts of the block stack that use it for high level synchronization.
Switch to using a new spinlock protecting just the size updates, as
that is all we need, and make sure everyone does the update through
the proper helper.
This fixes a bug reported with the nvme revalidating disks during a
hot removal operation, which can currently deadlock on bd_mutex.
Reported-by: Xianting Tian <xianting_tian@126.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need to hold the whole device bd_mutex to protect against
other thread concurrently deleting out partition before we get
to it, and thus causing a use after free.
Fixes: cddae808ae ("block: pass a hd_struct to delete_partition")
Reported-by: syzbot+6448f3c229bc52b82f69@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit e8c7d14ac6 ("block: revert back to synchronous request_queue removal")
stops to release request queue from wq context because that commit
supposed all blk_put_queue() is called in context which is allowed
to sleep. However, this assumption isn't true because we release disk's
reference in partition's percpu_ref's ->release() which doesn't allow
to sleep, because the ->release() is run via call_rcu().
Fixes this issue by moving put disk reference into hd_struct_free_work()
Fixes: e8c7d14ac6 ("block: revert back to synchronous request_queue removal")
Reported-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In theory, when GENHD_FL_NO_PART_SCAN is set, no partitions can be created
on one disk. However, ioctl(BLKPG, BLKPG_ADD_PARTITION) doesn't check
GENHD_FL_NO_PART_SCAN, so partitions still can be added even though
GENHD_FL_NO_PART_SCAN is set.
So far blk_drop_partitions() only removes partitions when disk_part_scan_enabled()
return true. This way can make ghost partition on loop device after changing/clearing
FD in case that PARTSCAN is disabled, such as partitions can be added
via 'parted' on loop disk even though GENHD_FL_NO_PART_SCAN is set.
Fix this issue by always removing partitions in blk_drop_partitions(), and
this way is correct because the current code supposes that no partitions
can be added in case of GENHD_FL_NO_PART_SCAN.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=LeLd
-----END PGP SIGNATURE-----
Merge tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Use import_uuid() where appropriate (Andy)
- bcache fixes (Coly, Mauricio, Zhiqiang)
- blktrace sparse warnings fix (Jan)
- blktrace concurrent setup fix (Luis)
- blkdev_get use-after-free fix (Jason)
- Ensure all blk-mq maps are updated (Weiping)
- Loop invalidate bdev fix (Zheng)
* tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-block:
block: make function 'kill_bdev' static
loop: replace kill_bdev with invalidate_bdev
partitions/ldm: Replace uuid_copy() with import_uuid() where it makes sense
block: update hctx map when use multiple maps
blktrace: Avoid sparse warnings when assigning q->blk_trace
blktrace: break out of blktrace setup on concurrent calls
block: Fix use-after-free in blkdev_get()
trace/events/block.h: drop kernel-doc for dropped function parameter
blk-mq: Remove redundant 'return' statement
bcache: pr_info() format clean up in bcache_device_init()
bcache: use delayed kworker fo asynchronous devices registration
bcache: check and adjust logical block size for backing devices
bcache: fix potential deadlock problem in btree_gc_coalesce
There is a specific API to treat raw data as UUID, i.e. import_uuid().
Use it instead of uuid_copy() with explicit casting.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-----BEGIN PGP SIGNATURE-----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=H+/Z
-----END PGP SIGNATURE-----
Merge tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"On top of the core changes, here are the block driver changes for this
merge window:
- NVMe changes:
- NVMe over Fibre Channel protocol updates, which also reach
over to drivers/scsi/lpfc (James Smart)
- namespace revalidation support on the target (Anthony
Iliopoulos)
- gcc zero length array fix (Arnd Bergmann)
- nvmet cleanups (Chaitanya Kulkarni)
- misc cleanups and fixes (me, Keith Busch, Sagi Grimberg)
- use a SRQ per completion vector (Max Gurtovoy)
- fix handling of runtime changes to the queue count (Weiping
Zhang)
- t10 protection information support for nvme-rdma and
nvmet-rdma (Israel Rukshin and Max Gurtovoy)
- target side AEN improvements (Chaitanya Kulkarni)
- various fixes and minor improvements all over, icluding the
nvme part of the lpfc driver"
- Floppy code cleanup series (Willy, Denis)
- Floppy contention fix (Jiri)
- Loop CONFIGURE support (Martijn)
- bcache fixes/improvements (Coly, Joe, Colin)
- q->queuedata cleanups (Christoph)
- Get rid of ioctl_by_bdev (Christoph, Stefan)
- md/raid5 allocation fixes (Coly)
- zero length array fixes (Gustavo)
- swim3 task state fix (Xu)"
* tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block: (166 commits)
bcache: configure the asynchronous registertion to be experimental
bcache: asynchronous devices registration
bcache: fix refcount underflow in bcache_device_free()
bcache: Convert pr_<level> uses to a more typical style
bcache: remove redundant variables i and n
lpfc: Fix return value in __lpfc_nvme_ls_abort
lpfc: fix axchg pointer reference after free and double frees
lpfc: Fix pointer checks and comments in LS receive refactoring
nvme: set dma alignment to qword
nvmet: cleanups the loop in nvmet_async_events_process
nvmet: fix memory leak when removing namespaces and controllers concurrently
nvmet-rdma: add metadata/T10-PI support
nvmet: add metadata support for block devices
nvmet: add metadata/T10-PI support
nvme: add Metadata Capabilities enumerations
nvmet: rename nvmet_check_data_len to nvmet_check_transfer_len
nvmet: rename nvmet_rw_len to nvmet_rw_data_len
nvmet: add metadata characteristics for a namespace
nvme-rdma: add metadata/T10-PI support
nvme-rdma: introduce nvme_rdma_sgl structure
...
percpu variables have a perfectly fine working stub implementation
for UP kernels, so use that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The IBM partition parser requires device type specific information only
available to the DASD driver to correctly register partitions. The
current approach of using ioctl_by_bdev with a fake user space pointer
is discouraged.
Fix this by replacing IOCTL calls with direct in-kernel function calls.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The seqcount of 'nr_sects_seq' is only needed in case of 32bit SMP,
so define it just for 32bit SMP.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Cc: Yufen Yu <yuyufen@huawei.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
delete_partition() clears the cached last_lookup partition. However the
.last_lookup cache may be overwritten by one IO path after it is cleared
from delete_partition(). Then another IO path may use the cached deleting
partition after hd_struct_free() is called, then use-after-free is triggered
on the cached partition.
Fixes the issue by the following approach:
1) always get the partition's refcount via hd_struct_try_get() before
setting .last_lookup
2) move clearing .last_lookup from delete_partition() to hd_struct_free()
which is the release handle of the partition's percpu-refcount, so that no
IO path can cache deleteing partition via .last_lookup.
It is one candidate approach of Yufen's patch[1] which adds overhead
in fast path by indirect lookup which may introduce one extra cacheline
in IO path. Also this patch relies on percpu-refcount's protection, and
it is easier to understand and verify.
[1] https://lore.kernel.org/linux-block/20200109013551.GB9655@ming.t460p/T/#t
Reported-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
