Current simple-card / audio-graph are assuming fixed
single-CPU/Codec/Platform.
This patch prepares multi-CPU/Codec/Platform support.
Note is that it is not yet full-multi-support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v996od2c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA control interface allows users to add arbitrary control elements
(called "user controls" or "user elements"), and its resource usage is
limited just by the max number of control sets (currently 32). This
limit, however, is quite loose: each allocation of control set may
have 1028 elements, and each element may have up to 512 bytes (ILP32) or
1024 bytes (LP64) of value data. Moreover, each control set may contain
the enum strings and TLV data, which can be up to 64kB and 128kB,
respectively. Totally, the whole memory consumption may go over 38MB --
it's quite large, and we'd rather like to reduce the size.
OTOH, there have been other requests even to increase the max number
of user elements; e.g. ALSA firewire stack require the more user
controls, hence we want to raise the bar, too.
For satisfying both requirements, this patch changes the management of
user controls: instead of setting the upper limit of the number of
user controls, we check the actual memory allocation size and set the
upper limit of the total allocation in bytes. As long as the memory
consumption stays below the limit, more user controls are allowed than
the current limit 32. At the same time, we set the lower limit (8MB)
as default than the current theoretical limit, in order to lower the
risk of DoS.
As a compromise for lowering the default limit, now the actual memory
limit is defined as a module option, 'max_user_ctl_alloc_size', so that
user can increase/decrease the limit if really needed, too.
Link: https://lore.kernel.org/r/s5htur3zl5e.wl-tiwai@suse.de
Co-developed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210408103149.40357-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=1uM7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmBkoFEACgkQJNaLcl1U
h9BqTgf5AUfR5NbQgJIUMtdMsuz+bthKGuPnpYhYzNUH0io9i3Sjpt0Mbw21dLp2
nXW+70BH0tJZBGR4DNGpmcpBLH5WPdOR9WIv4vCYy9Pr0uCGGKF/JkGeZAg7/llF
C3+yDfTnF0AvR+74xbf/LTjBPGja/08PED1ZC00NAkLhE3C0Pa/VQ0NaEtPUULWE
ZOWboF7hfQUeGzGPTqNp4Cy0/Pzokk6Fvl4kgfrxjNWO7ojIv9mCAvmYbusLW7NU
3Ph5VGsIuyMeorEoAVOFaBY2nrYG/mFZyzTNWJMgvF1MdeigMPNfbbffrUK0sn6k
e81zgWbwxboEujQ91/EZU7glIqtb6A==
=rr4V
-----END PGP SIGNATURE-----
Merge tag 'mute-led-rework' of https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-5.13
ALSA: control - add generic LED API
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
simple-card / audio-graph are assuming single CPU/Codec/Platform on
dai_link. Because of it, it is difficult to support Multi-CPU/Codec.
This patch allocs CPU/Codec/Platform dai_link imformation
instead of using existing props information. It can update to
multi-CPU/Codec, but is still assuming single-CPU/Codec for now.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blb61tpv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmBjRuQOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE9ZQw/6Ao2X1io4TVnyO/gO8HtwmnZ6TWcrLUlySaep
H6Suf0RHsOQO9VOaMcUarA3Wnz1vZ44qJ/fkdLTslnIPGSRJDUx15bbb+n2N6pQJ
gS7Umxy6n73rQyEoDjd3ZorvDGjFSVFpjM+RYjk/Ohq+yziz7nQ/SZuHPPeqm1GU
C5d9SxyXGdqlJJ6yFCHzbtjSmIey+l1TZ+j3rSSww/CzDKxB2l5J6JZAMUjVdL9b
J80Mcw0XLdG9iTtEnkUt3TwvLMcMl95UPeQHIkVQlwsRRb3BtHNIwJLPQ/n+Cou7
Hre3y2miUYHrNICEzMdMlpDzQBqu5wvpXgbgIV0CwAwCXPZBVWE1hVJ9gG0l+r1G
fy1a75OmEin4V9g8w+wNTWDEgjwAOkWhA67WVjpbvHtd6kEbISzt4JHFksG1rjU2
vXOIj2VBmQN6zHtxfcZqY8Ge4A7XGo7tAM/3NsUxin+2y7ZXI6sDvv+0esYmqrYr
9as/tD84L5LTrbUYewaUgEdauQXluQI1egRi7pSeg7hZyLeYYkmszk54Ra3zdlmM
m7Hr6u+Y/G7yeFdn/WdeG3VzdmxhC2ZFfk3gq0vneBS3WrATbf6nAORp2bwzGSz4
pUsVLSv+vhpZdSF+IxpUuMnsLkkbUCvFivXLjQ6irSWvp7uts1HWdRowdg7Pe2lC
FVbFRuA=
=1uM7
-----END PGP SIGNATURE-----
Merge tag 'tags/mute-led-rework' into for-next
ALSA: control - add generic LED API
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent laptops have usually two LEDs assigned to reflect
the speaker and microphone mute state. This implementation
adds a tiny layer on top of the control API which calculates
the state for those LEDs using the driver callbacks.
Two new access flags are introduced to describe the controls
which affects the audio path settings (an easy code change
for drivers).
The LED resource can be shared with multiple sound cards with
this code. The user space controls may be added to the state
chain on demand, too.
This code should replace the LED code in the HDA driver and
add a possibility to easy extend the other drivers (ASoC
codecs etc.).
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-4-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The layer registration allows to handle an extra functionality
on top of the control API. It can be used for the audio
LED control for example.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-3-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This helper is required for the following generic LED mute
patch. The helper also simplifies some other functions.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-2-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On Asymmetric multiprocessor, there is Cortex-A core and Cortex-M core,
Linux is running on A core, RTOS is running on M core.
The audio hardware device can be controlled by Cortex-M device,
So audio playback/capture can be handled by M core.
Rpmsg is the interface for sending and receiving msg to and from M
core, that we can create a virtual sound on Cortex-A core side.
A core will tell the Cortex-M core sound format/rate/channel,
where is the data buffer, what is the period size, when to start,
when to stop and when suspend or resume happen, each of this behavior
there is defined rpmsg command.
Especially we designed the low power audio case, that is to
allocate a large buffer and fill the data, then Cortex-A core can go
to sleep mode, Cortex-M core continue to play the sound, when the
buffer is consumed, Cortex-M core will trigger the Cortex-A core to
wakeup to fill data.
changes in v5:
- remove unneeded property in binding doc and driver
- update binding doc according to Rob's comments.
- Fix link issue reported by kernel test robot
changes in v4:
- remove the sound card node, merge the property to cpu dai node
according to Rob's comments.
- sound card device will be registered by cpu dai driver.
- Fix do_div issue reported by kernel test robot
changes in v3:
- add local refcount for clk enablement in hw_params()
- update the document according Rob's comments
changes in v2:
- update codes and comments according to Mark's comments
Shengjiu Wang (6):
ASoC: soc-component: Add snd_soc_pcm_component_ack
ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg
ASoC: dt-bindings: fsl_rpmsg: Add binding doc for rpmsg audio device
ASoC: imx-audio-rpmsg: Add rpmsg_driver for audio channel
ASoC: imx-pcm-rpmsg: Add platform driver for audio base on rpmsg
ASoC: imx-rpmsg: Add machine driver for audio base on rpmsg
.../devicetree/bindings/sound/fsl,rpmsg.yaml | 108 +++
include/sound/soc-component.h | 3 +
sound/soc/fsl/Kconfig | 30 +
sound/soc/fsl/Makefile | 6 +
sound/soc/fsl/fsl_rpmsg.c | 279 ++++++
sound/soc/fsl/fsl_rpmsg.h | 35 +
sound/soc/fsl/imx-audio-rpmsg.c | 140 +++
sound/soc/fsl/imx-pcm-rpmsg.c | 918 ++++++++++++++++++
sound/soc/fsl/imx-pcm-rpmsg.h | 512 ++++++++++
sound/soc/fsl/imx-rpmsg.c | 150 +++
sound/soc/soc-component.c | 14 +
sound/soc/soc-pcm.c | 2 +
12 files changed, 2197 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
create mode 100644 sound/soc/fsl/fsl_rpmsg.c
create mode 100644 sound/soc/fsl/fsl_rpmsg.h
create mode 100644 sound/soc/fsl/imx-audio-rpmsg.c
create mode 100644 sound/soc/fsl/imx-pcm-rpmsg.c
create mode 100644 sound/soc/fsl/imx-pcm-rpmsg.h
create mode 100644 sound/soc/fsl/imx-rpmsg.c
--
2.27.0
snd_soc_fixup_dai_links_platform_name() is assuming it is single platform.
return error if multi platforms.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871rc7aoo9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_fixup_dai_links_platform_name() creates name first (A),
and checks setup target pointer (B), and set it (C).
We should check target pointer first IMO.
This patch exchange the order to (B) -> (A) -> (C).
int snd_soc_fixup_dai_links_platform_name(...)
{
...
/* set platform name for each dailink */
for_each_card_prelinks(card, i, dai_link) {
(A) name = devm_kstrdup(...);
if (!name)
return -ENOMEM;
(B) if (!dai_link->platforms)
return -EINVAL;
/* only single platform is supported for now */
(C) dai_link->platforms->name = name;
}
return 0;
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8735wnaoon.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We shouldn't use dai_link->cpus/codecs/platforms directly,
because these are array now to supporting multi CPU/Codec/Platform.
This patch adds asoc_link_to_xxx() macro for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874kh3aopc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add snd_soc_pcm_component_ack back, which can be used to get an
updated buffer pointer in the platform driver.
On Asymmetric multiprocessor, this pointer can be sent to Cortex-M
core for audio processing.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1615516725-4975-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helper sof_dai_ssp_mclk to get the topology configured MCLK from a
pcm_runtime, return 0 if it is not available, and error if the dai type
is not SSP at the moment.
Export the helper for external use, e.g. from machine drivers.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210319124950.3853994-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When SND_HDA_PREALLOC_SIZE is set to 0, applications can request as much
memory as there is allowed. With value of AZX_MAX_BUF_SIZE it is 1GB per
stream, which is not realistic use case. Change it 4MB.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=201251#c322
Suggested-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20210318160618.2504068-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
soc-pcm has very similar but different DPCM BE DAI stop operation at
1) dpcm_be_dai_startup() error case rollback
2) dpcm_be_dai_startup_unwind()
3) dpcm_be_dai_shutdown()
The differences are
1) for rollback
2) Doesn't check by snd_soc_dpcm_be_can_update() (Is this bug ?)
3) Do soc_pcm_hw_free() if it was not !OPENed and !HW_FREEed,
and call soc_pcm_close().
We can share same code by
1) hw_free is not needed. Needs last dpcm as rollback.
2) hw_free is not needed.
3) hw_free is needed.
This patch adds new dpcm_be_dai_stop() and share these 3.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6rduoam.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/rt5645.c is the only user of the rt5645_platform_data,
move its definition to sound/soc/codecs/rt5645.c and remove the now
empty include/sound/rt5645.h file.
Note since the DMI quirk mechanism uses pointers to the
rt5645_platform_data struct we can NOT simply add its members to
the rt5645_priv struct and completely remove the struct.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210306230223.516566-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pointer to of_phandle_args passed to snd_soc_get_dai_name() and
of_xlate_dai_name() implementations is not modified. Since it is being
used only to translate passed OF node to a DAI name, it should not be
modified, so mark it as const for correctness and safer code.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210221153024.453583-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In January, Intel kbuild bot and Arnd Bergmann reported multiple
issues with randconfig. This patchset builds on Arnd's suggestions to
a) expose ACPI and PCI devices in separate modules, while sof-acpi-dev
and sof-pci-dev become helpers. This will result in minor changes
required for developers/testers, i.e. modprobe snd-sof-pci will no
longer result in a probe. The SOF CI was already updated to deal with
this module dependency change and introduction of new modules.
b) Fix SOF/SoundWire/DSP_config dependencies by moving the code
required to detect SoundWire presence in ACPI tables to sound/hda.
Link: https://lore.kernel.org/r/20210302003125.1178419-1-pierre-louis.bossart@linux.intel.com
-----BEGIN PGP SIGNATURE-----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=ttBB
-----END PGP SIGNATURE-----
Merge tag 'tags/sound-sdw-kconfig-fixes' into for-linus
ALSA/ASoC/SOF/SoundWire: fix Kconfig issues
In January, Intel kbuild bot and Arnd Bergmann reported multiple
issues with randconfig. This patchset builds on Arnd's suggestions to
a) expose ACPI and PCI devices in separate modules, while sof-acpi-dev
and sof-pci-dev become helpers. This will result in minor changes
required for developers/testers, i.e. modprobe snd-sof-pci will no
longer result in a probe. The SOF CI was already updated to deal with
this module dependency change and introduction of new modules.
b) Fix SOF/SoundWire/DSP_config dependencies by moving the code
required to detect SoundWire presence in ACPI tables to sound/hda.
Link: https://lore.kernel.org/r/20210302003125.1178419-1-pierre-louis.bossart@linux.intel.com
To change the module dependencies and simplify Kconfigs, we need to
introduce new driver names (sof-audio-acpi-intel-byt and
sof-audio-acpi-intel-bdw), and move from an exact string match to a
partial one.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210302003125.1178419-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Multiple bug reports report issues with the SOF and SST drivers when
dealing with single microphone cases.
We currently read the DMIC array information unconditionally but we
don't check that the configuration type is actually a mic array.
When the DMIC link does not rely on a mic array configuration, the
recommendation is to check the format information to infer the maximum
number of channels, and map this to the number of microphones.
This leaves a potential for a mismatch between actual microphones
available in hardware and what the ACPI table contains, but we have no
other source of information.
Note that single microphone configurations can alternatively be
handled with a 'mic array' configuration along with a 'vendor-defined'
geometry.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201251
BugLink: https://github.com/thesofproject/linux/issues/2725
Fixes: 7a33ea70e1 ('ALSA: hda: intel-nhlt: handle NHLT VENDOR_DEFINED DMIC geometry')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210302000146.1177770-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Another quiet release in terms of features, though several of the
drivers got quite a bit of work and there were a lot of general changes
resulting from Morimoto-san's ongoing cleanup work.
- As ever, lots of hard work by Morimoto-san cleaning up the code and
making it more consistent.
- Many improvements in the Intel drivers including a wide range of
quirks and bug fixes.
- A KUnit testsuite for the topology code.
- Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
- Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmAtZ7cACgkQJNaLcl1U
h9DD5Af/eeERQ2uVOqtw0If+XL1xRYe6RewgDoNcO/l/5WxBLrBH6NbEf0OwNJeg
vzZAkUBtxmx6XiW2M/h+4ucW1OPcg5IzxIWTHfGDMlKIxzb0jgWugRnJ7sdTnOs3
c+QHnvuOT7QzZBviAIkc5uZ5thAImYF8zDyKoGF5llztmnBYymtgpnvnRNZGM0ou
76oUzSvkCFI2b0Yf6bpGok2nBVlOu82HSHOUKjXVWk+LAeiivlYGOEZpdIKEe3S8
u6atQJ29XRr52Yuc2z4xnFQTW1cIDlwj2Fk5x/z8hX+5nRhNSGuIv1l5m7TfBj3e
mCO9cltKZxly0NXysgekn95JHwwwkA==
=MJSb
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.12' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.12
Another quiet release in terms of features, though several of the
drivers got quite a bit of work and there were a lot of general changes
resulting from Morimoto-san's ongoing cleanup work.
- As ever, lots of hard work by Morimoto-san cleaning up the code and
making it more consistent.
- Many improvements in the Intel drivers including a wide range of
quirks and bug fixes.
- A KUnit testsuite for the topology code.
- Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
- Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers.
Use explicit number to define elem_type enum instead of using
SOF_IPC_EXT_*.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Karol Trzciński <karolx.trzcinski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208232149.58899-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The below patch series are to support Audio over HDMI.
The modification in this patch series shall allow I2S driver
to playback standard PCM format and IEC958 encoded format to
the ADV7511 HDMI chip.
ALSA IEC958 plugin will be used to compose the IEC958 format.
Existing hdmi-codec driver only support standard pcm format.
Support of IEC958 encoded format passdown from ALSA IEC958 plugin
is needed so that the IEC958 encoded data can be streamed to the
HDMI chip.
Sia Jee Heng (4):
ASoC: codec: hdmi-codec: Support IEC958 encoded PCM format
drm: bridge: adv7511: Support I2S IEC958 encoded PCM format
dt-bindings: sound: Intel, Keembay-i2s: Add hdmi-i2s compatible string
ASoC: Intel: KMB: Support IEC958 encoded PCM format
.../bindings/sound/intel,keembay-i2s.yaml | 1 +
drivers/gpu/drm/bridge/adv7511/adv7511.h | 1 +
.../gpu/drm/bridge/adv7511/adv7511_audio.c | 6 ++
include/sound/hdmi-codec.h | 5 ++
sound/soc/codecs/hdmi-codec.c | 4 +-
sound/soc/intel/keembay/kmb_platform.c | 73 ++++++++++++++++++-
sound/soc/intel/keembay/kmb_platform.h | 1 +
7 files changed, 89 insertions(+), 2 deletions(-)
base-commit: 2557c711b87cd42bb22be9ca6ff3fce038624f30
--
2.18.0
The extended HDA bus (hdac_ext) provides interfaces for more
fine-grained control of individual links than what plain HDA
provides for. Links can be powered off when they are not used and if
all links are released, controller can shut down the command DMA.
These interfaces are currently not used by common HDA codec drivers.
When a HDA codec is runtime suspended, it calls snd_hdac_codec_link_down(),
but there is no link to the HDA extended bus, and on controller side
the links are shut down only when all codecs are suspended.
This patch adds link_power() to hdac_bus ops. Controllers using the HDA
extended core, can use this to plug in snd_hdac_ext_bus_link_power() to
implement more fine-grained control of link power.
No change is needed for plain HDA controllers nor to existing HDA
codec drivers.
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210205184630.1938761-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Existing hdmi-codec driver only support standard pcm format.
Support of IEC958 encoded format pass from ALSA IEC958 plugin is needed
so that the IEC958 encoded data can be streamed to the HDMI chip.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Link: https://lore.kernel.org/r/20210204014258.10197-2-jee.heng.sia@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following functions are renamed for a better global visibility.
graph_card_probe() --> audio_graph_card_probe()
graph_parse_of() --> audio_graph_parse_of()
graph_remove() --> audio_graph_remove() [exported as well]
The references of these are updated in audio graph and Tegra audio
graph card drivers.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1612719418-5858-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit e7bbb7acab ("dmaengine: add peripheral configuration")
adds peripheral configuration for dma_slave_config.
This configuration is useful for some audio peripherals, for
example, the peripheral supports multi fifos, we can
let the DMA know which fifos are selected. So also add
this configuration for snd_dmaengine_dai_dma_data.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1612509985-11063-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This change adds audio jack injection feature through debugfs, with
this feature, we could validate alsa userspace changes by injecting
plugin or plugout events to the non-phantom audio jacks.
With this change, the sound core will build the folders
$debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled.
And if users also enable the SND_JACK_INJECTION_DEBUG, the jack
injection nodes will be built in the folder cardN like below:
$tree $debugfs_mount_dir/sound
$debugfs_mount_dir/sound
├── card0
│ ├── HDMI_DP_pcm_10_Jack
│ │ ├── jackin_inject
│ │ ├── kctl_id
│ │ ├── mask_bits
│ │ ├── status
│ │ ├── sw_inject_enable
│ │ └── type
...
│ └── HDMI_DP_pcm_9_Jack
│ ├── jackin_inject
│ ├── kctl_id
│ ├── mask_bits
│ ├── status
│ ├── sw_inject_enable
│ └── type
└── card1
├── HDMI_DP_pcm_5_Jack
│ ├── jackin_inject
│ ├── kctl_id
│ ├── mask_bits
│ ├── status
│ ├── sw_inject_enable
│ └── type
...
├── Headphone_Jack
│ ├── jackin_inject
│ ├── kctl_id
│ ├── mask_bits
│ ├── status
│ ├── sw_inject_enable
│ └── type
└── Headset_Mic_Jack
├── jackin_inject
├── kctl_id
├── mask_bits
├── status
├── sw_inject_enable
└── type
The nodes kctl_id, mask_bits, status and type are read-only, users
could check jack or jack_kctl's information through them.
The nodes sw_inject_enable and jackin_inject are directly used for
injection. The sw_inject_enable is read-write, users could check if
software injection is enabled or not on this jack, and users could
echo 1 or 0 to enable or disable software injection on this jack. Once
the injection is enabled, the jack will not change by hardware events
anymore, once the injection is disabled, the jack will restore the
last reported hardware events to the jack. The jackin_inject is
write-only, if the injection is enabled, users could echo 1 or 0 to
this node to inject plugin or plugout events to this jack.
For the detailed usage information on these nodes, please refer to
Documentation/sound/designs/jack-injection.rst.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It's often the case that we would write or read a particular field
in register. With the current soc_component apis, reading a particular
field in register would involve first read the register and then
perform shift operations.
Ex:
to read from a field mask of 0xf0
val = snd_soc_component_read(component, reg);
field = ((val & 0xf0) >> 0x4);
This is sometimes prone to errors and code become less readable!
With this new api we could just do
field = snd_soc_component_read_field(component, reg, 0xf0);
this makes it bit simple, easy to write and less error prone!
This also applies to writing!
There are various places in kernel which provides such field interfaces
however soc_component seems to be missing this.
This patch is inspired by FIELD_GET/FIELD_PREP macros in include/linux/bitfield.h
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210126171749.1863-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The fix for a long-standing USB-audio bug required one more dependency
variable to be added to the hw constraints. Unfortunately I didn't
realize at debugging that the new addition may result in the overflow
of the dependency array of each snd_pcm_hw_rule (up to three plus a
sentinel), because USB-audio driver adds one more dependency only for
a certain device and bus, hence it works as is for many devices. But
in a bad case, a simple open always results in -EINVAL (with kernel
WARNING if CONFIG_SND_DEBUG is set) no matter what is passed.
Since the dependencies are real and unavoidable (USB-audio restricts
the hw_params per looping over the format/rate/channels combos), the
only good solution seems to raise the bar for one more dependency for
snd_pcm_hw_rule -- so does this patch: now the hw constraint
dependencies can be up to four.
Fixes: 506c203cc3 ("ALSA: usb-audio: Fix hw constraints dependencies")
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Link: https://lore.kernel.org/r/20210123155730.22576-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_runtime / snd_soc_dai / snd_soc_dai_driver / snd_soc_dai_link
have related parameter which is similar but not same naming.
struct snd_pcm_runtime {
...
(A) unsigned int rate;
...
(B) unsigned int sample_bits;
...
};
struct snd_soc_dai {
...
(A) unsigned int rate;
(B) unsigned int sample_bits;
...
};
struct snd_soc_dai_driver {
...
(A) unsigned int symmetric_rates:1;
(B) unsigned int symmetric_samplebits:1;
...
};
struct snd_soc_dai_link {
...
(A) unsigned int symmetric_rates:1;
(B) unsigned int symmetric_samplebits:1;
...
};
Because it is similar but not same naming rule,
code can be verbose / can't share macro.
This patch sync naming rule for framework.
- xxx_rates;
+ xxx_rate;
- xxx_samplebits;
+ xxx_sample_bits;
old name will be removed if all drivers were switched
to new naming rule.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wnweolj6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ECS EF20EA laptop use gpio for jack detection instead of rt5645
rt5645 JD. However, the GPIO polarity is inverse for hp-detect based
on the _DSD property of the RTK2 device.
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {"hp-detect-gpio", Package() {^RTK2, 0, 0, 1 }},
}
})
This flag will invert the hp-detect gpio polarity.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Link: https://lore.kernel.org/r/20210111054141.4668-4-chiu@endlessos.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There's a lot of changes here but mostly cleanups and driver specific
things, the most user visible change is the support for boot time
selection of Intel DSP firmware which will make it easier for people to
move over to the preferred modern implementations in distros and other
large scale deployments.
This also includes a merge of the new auxillary bus which was done in
anticipation of use by the Intel DSP drivers which didn't quite make it.
- Lots more cleanups and simplifications from Morimoto-san.
- Support for some basic DPCM systems in the audio graph card from
Sameer Pujar.
- Remove some old pre-DT Freescale drivers for platforms that are now
DT only.
- Move selection of which Intel DSP implementation to use to boot time
rather than requiring it to be selected at build time.
- Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715,
Qualcomm SM8250 and simple GPIO based muxes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/XcxYACgkQJNaLcl1U
h9ApEgf/ZkKxj1Nq6RCfUqhyGK2u1ktzCpnugvjHebutXV1LD0y+y0/CnjdN5Vou
8r+BsX6izfEx6JuZyu1ryQcz+Rsp6VH6uK9e/vRPExIkkAw+JQzEGVzQRyrnREoA
eV8BO92YKrRtJM1HoIBnQOhoWMc/4Kqi7hklaiXDhHRDGpLcbTyeVK8ROarORLcy
aupt7WinLvbhP++xjs9YR/RffjpwxyxOkmkIaM9TpkKqADays+sBDCZXSVgFjQik
1rFLQ8jYAb/EOPNdCXrMEILrSaNMCz719vh2gZkm1yYQ3Tp5dH9WGqLROq9Oy/D4
FaCGJoxX0HUe7MWbJeI97PFZB8i2gQ==
=iCuN
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.11' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.11
There's a lot of changes here but mostly cleanups and driver specific
things, the most user visible change is the support for boot time
selection of Intel DSP firmware which will make it easier for people to
move over to the preferred modern implementations in distros and other
large scale deployments.
This also includes a merge of the new auxillary bus which was done in
anticipation of use by the Intel DSP drivers which didn't quite make it.
- Lots more cleanups and simplifications from Morimoto-san.
- Support for some basic DPCM systems in the audio graph card from
Sameer Pujar.
- Remove some old pre-DT Freescale drivers for platforms that are now
DT only.
- Move selection of which Intel DSP implementation to use to boot time
rather than requiring it to be selected at build time.
- Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715,
Qualcomm SM8250 and simple GPIO based muxes.
Initial support for ADL w/ RT711
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201209153102.3028310-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_trigger() calls DAI/Component/Link trigger,
but some of them might be failed.
static int soc_pcm_trigger(...)
{
...
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
ret = snd_soc_link_trigger(substream, cmd);
if (ret < 0)
break;
(*) ret = snd_soc_pcm_component_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_pcm_dai_trigger(substream, cmd);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
ret = snd_soc_pcm_dai_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_pcm_component_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_link_trigger(substream, cmd);
break;
}
...
}
For example, if soc_pcm_trigger() failed at (*) point,
we need to rollback previous succeeded trigger.
This patch adds trigger mark for DAI/Component/Link,
and do STOP if START/RESUME/PAUSE_RELEASE were failed.
Because it need to use new rollback parameter,
we need to modify DAI/Component/Link trigger functions in the same time.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6uycssd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "filter" debugfs file defines the log levels used by
the firmware and reported by sof-logger.
The file contains the formatted entry list, where each entry
follows the following syntax in plain text:
log_level uuid_id pipe_id comp_id;
This file may be updated by userspace applications such sof-logger,
or directly by the user during debugging process.
An unused (wildcard) pipe_id or comp_id value should be set to -1,
uuid_id is hexadecimal value, so when unused then should be set to 0.
When the file is modified, an IPC command is sent to FW with new
trace levels for selected components in filter elements list.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201204165014.2697903-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX8oseA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylqGQCdF2TND5jjcETWHIrunPAX6iEDLecAnjyIMc4q
cIr5piwCq+m6/S2gSCpA
=t7EL
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/KnpUACgkQJNaLcl1U
h9CWvQf9EdHZFlsDiP8PbbSLtMzpkqaJOlmg3A1Rn6XOYjztDEDQQp12vYC9jOmJ
PkBz8kh+0dohTt6TIx5IEt+r1pbYWAzFOkX7v3QzYp8+nrmd1bT/RDRglOrmydLH
ntd9XNE1BA8k9n4YQQBWrspDEnwnpCygSw4lP/QXz7OyyhnZ7fYGOG3hPXKw+Sdj
gQugmSAnUYaVti4d7K6Cuhj08HT13FvGFqrkLYljTmsnnVw0T4kXNFtiODMe1QMq
YYeKiHCFI8ysk2hK0sYdmwr5rz5eWT5mGnSXPGsD3o876NF1uw+Q5iTX57uydDrp
GijjnCOGz+yZ7dfBi2MAflP5Xsw4ew==
=SVwj
-----END PGP SIGNATURE-----
Merge tag 'auxbus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into asoc-5.11
Auxiliary Bus support tag for 5.11-rc1
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Series introducing a modified boot sequence for the Intel Ice Lake
platform. While no bugs are currently open for this, the current
DSP boot implementation does not follow the full programming sequence.
This patchset is the first instance where SOF driver uses data in
the extended manifest (part of the firmware binary), to influence
the boot process. IPC cannot be used to get this information, as it
is already needed for early boot.
This change is backwards compatible with old firmware versions,
where extended manifest is not available.
Fred Oh (5):
ASoC: SOF: ops: add parse_platform_ext_manifest() op
ASoC: SOF: Intel: hda: define parse_platform_ext_manifest op
ASoC: SOF: ext_manifest: parse cavs extra config data elem
ASoC: SOF: ops: modify the signature of stall op
ASoC: SOF: Intel: hda: add sof_icl_ops for ICL platforms
include/sound/sof/ext_manifest.h | 1 +
sound/soc/sof/intel/Makefile | 2 +-
sound/soc/sof/intel/apl.c | 3 +
sound/soc/sof/intel/cnl.c | 19 +---
sound/soc/sof/intel/ext_manifest.h | 35 +++++++
sound/soc/sof/intel/hda-loader.c | 100 ++++++++++++++++++++
sound/soc/sof/intel/hda.h | 11 +++
sound/soc/sof/intel/icl.c | 145 +++++++++++++++++++++++++++++
sound/soc/sof/intel/tgl.c | 3 +
sound/soc/sof/loader.c | 3 +
sound/soc/sof/ops.h | 14 ++-
sound/soc/sof/sof-pci-dev.c | 2 +-
sound/soc/sof/sof-priv.h | 7 +-
13 files changed, 324 insertions(+), 21 deletions(-)
create mode 100644 sound/soc/sof/intel/ext_manifest.h
create mode 100644 sound/soc/sof/intel/icl.c
--
2.28.0
ALSA SoC has soc-jack.c, but doesn't have soc-jack.h.
This patch creates new soc-jack.h and moves snd_soc_jack_xxx()
from soc.h.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wny3u3zg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With a stream with low bitrate, user can't pause or resume the stream
near the end of the stream because current ALSA doesn't allow it.
If the stream has very low bitrate enough to store whole stream into
the buffer, user can't do anything except stop the stream and then
restart it from the first because most of applications call draining
after sending last frame to the kernel.
If pause, resume are allowed during draining, user experience can be
enhanced.
To prevent malfunction in HW drivers which don't support pause
during draining, pause during draining will only work if HW driver
enable this feature explicitly by calling
snd_compr_use_pause_in_draining().
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/000101d6c3f0$89b312b0$9d193810$@samsung.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add parse_platform_ext_manifest() op to parse platform-specific config
data in the extended manifest.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201127164022.2498406-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().
static int soc_compr_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ machine_err:
| ...
| out:
(A) ...
| pm_err:
| ...
v return ret;
}
The difference is
soc_compr_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
1) snd_soc_dai_compr_startup/shutdown()
2) snd_soc_component_compr_open/free()
=> 3) snd_soc_link_compr_startup/shutdown()
This patch is for 3) snd_soc_link_compr_startup/shutdown()
and adds new cstream mark.
It will mark cstream when startup() was suceeded.
If rollback happen *after* that, it will check rollback flag
and marked cstream.
It cares *previous* startup() only now,
but we might want to check *whole* marked cstream in the future.
This patch is using macro so that it can be easily adjust to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0ui5iwf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().
static int soc_compr_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ machine_err:
| ...
| out:
(A) ...
| pm_err:
| ...
v return ret;
}
The difference is
soc_compr_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
1) snd_soc_dai_compr_startup/shutdown()
=> 2) snd_soc_component_compr_open/free()
3) snd_soc_link_compr_startup/shutdown()
This patch is for 2) snd_soc_component_compr_open/free(),
and adds new cstream mark.
It will mark cstream when startup() was suceeded.
If rollback happen *after* that, it will check rollback flag
and marked cstream.
It cares *previous* startup() only now,
but we might want to check *whole* marked cstream in the future.
This patch is using macro so that it can be easily adjust to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfey5iwk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().
static int soc_compr_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ machine_err:
| ...
| out:
(A) ...
| pm_err:
| ...
v return ret;
}
The difference is
soc_compr_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
=> 1) snd_soc_dai_compr_startup/shutdown()
2) snd_soc_component_compr_open/free()
3) snd_soc_link_compr_startup/shutdown()
This patch is for 1) snd_soc_dai_compr_startup/shutdown(),
and adds new cstream mark.
It will mark cstream when startup() was suceeded.
If rollback happen *after* that, it will check rollback flag
and marked cstream.
It cares *previous* startup() only now,
but we might want to check *whole* marked cstream in the future.
This patch is using macro so that it can be easily adjust to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mtze5iwp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This file content describes memory allocation status
at run-time, typically to detect memory leaks.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201124180017.2232128-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Section comment should be coherent with IPC prefix from define
names.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201124180017.2232128-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each define value in series should be aligned and tabs should
be used instead of spaces to follow code-style.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201124180017.2232128-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Values given in this dictionary describes used firmware configuration,
like feature availability, buffer size limits and similar properties.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201124180017.2232128-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ignore_machine field in the component driver is used to
ignore the FE DAI links defined in the machine driver,
override BE fixups and set the stream names for the
DAI links defined in the machine driver. This is required
to make SOF compatible with the legacy machine drivers.
In the case of the nocodec machine driver in SOF, there is
no need to rely upon this ignore_machine logic in the core.
Modify the machine driver to set DAI link stream names and the
BE hw_params_fixup callback appropriately.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201120141653.2160134-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implicit values may have a length of 15bits (s16) so we need to declare
the proper size so we don't get undefined behaviour. This appears to be
arch and compiler dependent. This commit is to keep the headers aligned
between the firmware and kernel. UBSan discovered this bug in the
firmware.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201120144025.2166023-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of driver specific fixes, mostly for x86 systems (or CODECs
used mostly on x86) and all for relatively minor issues, the biggest one
being fixing S24_LE format on Keem Bay systems.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl+2peUACgkQJNaLcl1U
h9COxAf/aq+7DrGjU1umHPD/zfS3ppjmN1hNCHBxqiCm1U9SBbBLGlnDMMcPqFQR
wS8SKdDfhKONA7q7fhGDvvFZd07r9HzIFra+9HVjuc5ouKlPkoETF8uDfXqAdOkM
sXkffe45Wh9DqWIPZOng8ZpKVGW6v3oUCAMrlx53t9LUT9Sd8oQrhsx3nwgr/CUb
SmZiBFF5kWpK8CgG82PuDlCHEnsI4SEatYqHtEMYRBfE0K8fzROye7e7WCKBsb/8
QaDf1RrQ599GXLMVJzbFsXpybBwaaP7LWkKCDHfQbAeKZ6EAWH0agbvUq2X1H2nm
/a3Th5SgL6Vm6KXYvIFGHyTq8rbPLg==
=OkNz
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.10-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.11
A collection of driver specific fixes, mostly for x86 systems (or CODECs
used mostly on x86) and all for relatively minor issues, the biggest one
being fixing S24_LE format on Keem Bay systems.
Intel machine drivers are used by parent platform drivers based on
closed-source firmware (Atom/SST and catpt) and SOF-based ones.
In some cases for ACPI-based platforms, the behavior of machine
drivers needs to be modified depending on the parent type, typically
for card names and power management.
An initial solution based on passing a boolean flag as a platform
device parameter was tested earlier. Since it looked overkill, this
patch suggests instead a simple string comparison to identify an SOF
parent device/driver.
Suggested-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201112223825.39765-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mirror capabilities provided for PCI devices, so that distributions
can select which ACPI driver is loaded at run-time with kernel
parameters and DMI tables instead of forcing a build-time selection.
The "legacy" option supported for HDaudio has no meaning here and will
be ignored.
The 'SST' driver based on closed-source firmware has the priority to
avoid any impact on users, and the choice to use SOF is strictly
opt-in. This may change at some point when the 'SST' driver is
deprecated on Baytrail/Cherrytrail.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201112223825.39765-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
component related function should be implemented at
soc-component.c.
This patch adds snd_soc_component_compr_get_metadata().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87zh3l6gl8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
component related function should be implemented at
soc-component.c.
This patch adds snd_soc_component_compr_set_metadata().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/871rgx7v5t.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
component related function should be implemented at
soc-component.c.
This patch adds snd_soc_component_compr_copy().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87361d7v5z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
component related function should be implemented at
soc-component.c.
This patch adds snd_soc_component_compr_pointer().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/874klt7v65.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
component related function should be implemented at
soc-component.c.
This patch adds snd_soc_component_compr_ack().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/875z697v6c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
component related function should be implemented at
soc-component.c.
This patch adds snd_soc_component_compr_get_codec_caps().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/877dqp7v6i.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
component related function should be implemented at
soc-component.c.
This patch adds snd_soc_component_compr_get_caps().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/878sb57v6q.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
component related function should be implemented at
soc-component.c.
This patch adds snd_soc_component_compr_get_params().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87a6vl7v6x.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
component related function should be implemented at
soc-component.c.
This patch moves soc-compress soc_compr_components_set_params()
to soc-component as snd_soc_component_compr_set_params().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87blg17v74.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
component related function should be implemented at
soc-component.c.
This patch moves soc-compress soc_compr_components_trigger()
to soc-component as snd_soc_component_compr_trigger().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87d00h7v7k.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
component related function should be implemented at
soc-component.c.
This patch moves soc-compress soc_compr_components_free()
to soc-component as snd_soc_component_compr_free().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87eekx7v7r.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
component related function should be implemented at
soc-component.c.
This patch moves soc-compress soc_compr_components_open()
to soc-component as snd_soc_component_compr_open().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87ft5d7v7x.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF (Sound Open Firmware) tree contains a lot of references in
topology files to 'codec_slave'/'codec_master' terms, which in turn
come from alsa-lib and ALSA/ASoC topology support at the kernel
level. These terms are no longer compatible with the guidelines
adopted by the kernel community [1], standard organizations, and need
to change in backwards-compatible ways.
The main/secondary terms typically suggested in guidelines don't mean
anything for clocks, this patchset suggests instead the use of
'provider' and 'consumer' terms, with the 'codec' prefix kept to make
it clear that the codec is the reference. The CM/CS suffixes are also
replaced by CP/CC.
It can be argued that the change of suffix is invasive, but finding a
replacement that keeps the M and S shortcuts has proven difficult in
quite a few contexts.
The previous definitions are kept for backwards-compatibility so this
change should not have any functional impact. It is suggested that new
contributions only use the new terms but there is no requirement to
transition immediately to the new definitions for existing code. Intel
will however update all its past contributions related to bit
clock/frame sync configurations immediately.
This patchset contains the kernel changes only, the alsa-lib changes
were shared separately.
Feedback welcome
~Pierre
[1] https://lkml.org/lkml/2020/7/4/229
Pierre-Louis Bossart (4):
ASoC: topology: use inclusive language for bclk and fsync
ASoC: SOF: use inclusive language for bclk and fsync
ASoC: Intel: atom: use inclusive language for SSP bclk/fsync
ASoC: Intel: keembay: use inclusive language for bclk and fsync
include/sound/soc-dai.h | 32 +++++++++++++++---------
include/sound/sof/dai.h | 16 ++++++++----
include/uapi/sound/asoc.h | 22 ++++++++++------
sound/soc/intel/atom/sst-atom-controls.c | 12 ++++-----
sound/soc/intel/atom/sst-atom-controls.h | 4 +--
sound/soc/intel/keembay/kmb_platform.c | 22 ++++++++--------
sound/soc/intel/keembay/kmb_platform.h | 8 +++---
sound/soc/soc-topology.c | 24 +++++++++---------
sound/soc/sof/topology.c | 18 ++++++-------
9 files changed, 89 insertions(+), 69 deletions(-)
--
2.25.1
This commit exposes following functions which can be used by a sound
card driver based on generic audio graph driver. Idea is vendors can
have a thin driver and re-use common stuff from audio graph driver.
- graph_card_probe()
- graph_parse_of()
In doing so a new header file is added for above. The graph_probe()
function is simplified by moving more common stuff to graph_parse_of().
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1604329814-24779-8-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new members in struct 'asoc_simple_priv'. Idea is to leverage
simple or graph card driver as much as possible and vendor can
maintain a thin driver to control the behavior by populating these
newly exposed members.
Following are the members added in 'asoc_simple_priv':
- 'ops' struct: In some cases SoC vendor drivers may want to
implement 'snd_soc_ops' callbacks differently. In such cases
custom callbacks would be used.
- 'force_dpcm' flag: Right now simple or graph card drivers
detect DAI links as DPCM links if:
* The dpcm_selectable is set AND
* Codec is connected to multiple CPU endpoints or aconvert
property is used for rate/channels.
So there is no way to directly specify usage of DPCM alone. So a
flag is exposed to mark all links as DPCM. Vendor driver can
set this if required.
- 'dpcm_selectable': Currently simple or audio graph drivers
provide a way to enable this for specific compatibles. However
vendor driver may want to define some additional info. Thus
expose this variable where vendor drivers can set this if
required.
Audio graph driver is updated to consider above flags or callbacks.
Subsequent patches in the series illustrate usage for above.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1604329814-24779-7-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_end_walk_at_be() stops the graph walk when first BE is found for
the given FE component. In a component model we may want to connect
multiple DAIs from different components. A new flag is introduced in
'snd_soc_card', which when set allows DAI/component chaining. Later
PCM operations can be called for all these listed components for a
valid DAPM path.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1604329814-24779-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add delay to fix pop noise from speaker.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201105030804.31115-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In theory topology can be loaded in multiple steps by providing index to
snd_soc_tplg_component_load, however, from usability point of view it
doesn't make sense, as can be seen from all current users loading
topology in one go. Remove the unnecessary parameter.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Topology API exposes snd_soc_tplg_widget_remove and
snd_soc_tplg_widget_remove_all, but both are nowhere used. All current
users load and unload topology as a whole. As following commits
introduce resource managed memory, remove them to simplify code and
reduce maintenance burden.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201030145427.3497990-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When building with W=2, there are lots of warnings about the
snd_kcontrol_new name field being an array of 'unsigned char'
but initialized to a string:
include/sound/soc.h:93:48: warning: pointer targets in initialization of 'const unsigned char *' from 'char *' differ in signedness [-Wpointer-sign]
Make it a regular 'char *' to avoid flooding the build log with this.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201026165715.3723704-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
soc_pcm_hw_params() does rollback when failed (A),
but, it is almost same as soc_pcm_hw_free().
static int soc_pcm_hw_params(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return ret;
^ component_err:
| ...
| interface_err:
(A) ...
| codec_err:
| ...
v return ret;
}
The difference is
soc_pcm_hw_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_pcm_hw_free() and rollback.
Now, soc_pcm_hw_params/free() are handling
1) snd_soc_link_hw_params/free()
2) snd_soc_pcm_component_hw_params/free()
3) snd_soc_dai_hw_params/free()
Now, 1) to 3) are handled.
This patch adds new soc_pcm_hw_clean() and call it from
soc_pcm_hw_params() as rollback, and from soc_pcm_hw_free() as
normal close handler.
Other difference is that soc_pcm_hw_free() handles digital mute
if it was last user. Rollback also handles it by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h7rhgqab.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_hw_params() does rollback when failed (A),
but, it is almost same as soc_pcm_hw_free().
static int soc_pcm_hw_params(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return ret;
^ component_err:
| ...
| interface_err:
(A) ...
| codec_err:
| ...
v return ret;
}
The difference is
soc_pcm_hw_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_pcm_hw_free() and rollback.
Now, soc_pcm_hw_params/free() are handling
1) snd_soc_link_hw_params/free()
2) snd_soc_pcm_component_hw_params/free()
=> 3) snd_soc_dai_hw_params/free()
This patch is for 3) snd_soc_dai_hw_params/free().
The idea of having bit-flag or counter is not enough for this purpose.
For example if one DAI is used for 2xPlaybacks for some reasons,
and if 1st Playback was succeeded but 2nd Playback was failed,
2nd Playback rollback doesn't need to call shutdown.
But it has succeeded bit-flag or counter via 1st Playback,
thus, 2nd Playback rollback will call unneeded shutdown.
And 1st Playback's necessary shutdown will not be called,
because bit-flag or counter was cleared by wrong 2nd Playback rollback.
To avoid such case, this patch marks substream pointer when hw_params() was
succeeded. If rollback needed, it will check rollback flag and marked
substream pointer.
One note here is that it cares *previous* hw_params() only now,
but we might want to check *whole* marked substream in the future.
This patch is using macro named "push/pop", so that it can be easily
update.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87imbxgqai.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_hw_params() does rollback when failed (A),
but, it is almost same as soc_pcm_hw_free().
static int soc_pcm_hw_params(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return ret;
^ component_err:
| ...
| interface_err:
(A) ...
| codec_err:
| ...
v return ret;
}
The difference is
soc_pcm_hw_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_pcm_hw_free() and rollback.
Now, soc_pcm_hw_params/free() are handling
1) snd_soc_link_hw_params/free()
=> 2) snd_soc_pcm_component_hw_params/free()
3) snd_soc_dai_hw_params/free()
This patch is for 2) snd_soc_pcm_component_hw_params/free().
The idea of having bit-flag or counter is not enough for this purpose.
For example if one DAI is used for 2xPlaybacks for some reasons,
and if 1st Playback was succeeded but 2nd Playback was failed,
2nd Playback rollback doesn't need to call shutdown.
But it has succeeded bit-flag or counter via 1st Playback,
thus, 2nd Playback rollback will call unneeded shutdown.
And 1st Playback's necessary shutdown will not be called,
because bit-flag or counter was cleared by wrong 2nd Playback rollback.
To avoid such case, this patch marks substream pointer when hw_params() was
succeeded. If rollback needed, it will check rollback flag and marked
substream pointer.
One note here is that it cares *previous* hw_params() only now,
but we might want to check *whole* marked substream in the future.
This patch is using macro named "push/pop", so that it can be easily
update.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0wdgqav.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_hw_params() does rollback when failed (A),
but, it is almost same as soc_pcm_hw_free().
static int soc_pcm_hw_params(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return ret;
^ component_err:
| ...
| interface_err:
(A) ...
| codec_err:
| ...
v return ret;
}
The difference is
soc_pcm_hw_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_pcm_hw_free() and rollback.
Now, soc_pcm_hw_params/free() are handling
=> 1) snd_soc_link_hw_params/free()
2) snd_soc_pcm_component_hw_params/free()
3) snd_soc_dai_hw_params/free()
This patch is for 1) snd_soc_link_hw_params/free().
The idea of having bit-flag or counter is not enough for this purpose.
For example if one DAI is used for 2xPlaybacks for some reasons,
and if 1st Playback was succeeded but 2nd Playback was failed,
2nd Playback rollback doesn't need to call shutdown.
But it has succeeded bit-flag or counter via 1st Playback,
thus, 2nd Playback rollback will call unneeded shutdown.
And 1st Playback's necessary shutdown will not be called,
because bit-flag or counter was cleared by wrong 2nd Playback rollback.
To avoid such case, this patch marks substream pointer when hw_params() was
succeeded. If rollback needed, it will check rollback flag and marked
substream pointer.
One note here ist that it cares *previous* hw_params() only now,
but we might want to check *whole* marked substream in the future.
This patch is using macro named "push/pop", so that it can be easily
update.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfgtgqba.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 140a4532cd ("ASoC: soc-pcm: add soc_pcm_clean() and call it
from soc_pcm_open/close()") uses soc_pcm_clean() and then
for_each_rtd_dais_rollback() is no longer used.
This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o8lpgqbp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kernel-doc markups should use this format:
identifier - description
There is a common comment marked, instead, with kernel-doc
notation.
Some identifiers have different names between their prototypes
and the kernel-doc markup.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/535182d6f55d7a7de293dda9676df68f5f60afc6.1603469755.git.mchehab+huawei@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Not a huge amount going on in the core for ASoC this time but quite a
lot of driver activity, especially for the Intel platforms:
- Replacement of the DSP driver for some older x86 systems with a new
one which was written with closer reference to the DSP firmware so
should hopefully be more robust and maintainable.
- A big batch of static checker and other fixes for the rest of the x86
DSP drivers.
- Cleanup of the error unwinding code from Morimoto-san, hopefully
making it more robust.
- Helpers for parsing auxiluary devices from the device tree from
Stephan Gerhold.
- New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359
Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas
Instruments J721E, TAS2110, TAS2564 and TAS2764
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl+EToAACgkQJNaLcl1U
h9AVGwgAghl0dybTqjd1G0i0qOK5AXAdgZaDSstOI++xAd50i0LHlkEMN8/XTcMB
vks1Nt3NIF7E0DAECZ93ZMA3tSJItIuq4RPjFLBbQz7550xIA9G/h1ff9+piltmi
8M2HREH1J2z8HflSW5ZPy9sN0Vk71utni984WO/OI6tvWt2CxTTkOM6nt6p4TsKp
EIHU2rrxeZ+fh+qJrf3WXCsI3CCFAFtADYQO8LCNrZDkmosqRLDNQY/88C1Gy/Zo
d8SM2wrjc+BHDdxA3xSQxZmOq7XCe/7+fTluDYpoci9MvtL6QdlgfH2kqAwtqxRB
BG58pVJDGrW/68rRHUNl5ti4JL9F0g==
=4ONt
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.10
Not a huge amount going on in the core for ASoC this time but quite a
lot of driver activity, especially for the Intel platforms:
- Replacement of the DSP driver for some older x86 systems with a new
one which was written with closer reference to the DSP firmware so
should hopefully be more robust and maintainable.
- A big batch of static checker and other fixes for the rest of the x86
DSP drivers.
- Cleanup of the error unwinding code from Morimoto-san, hopefully
making it more robust.
- Helpers for parsing auxiluary devices from the device tree from
Stephan Gerhold.
- New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359
Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas
Instruments J721E, TAS2110, TAS2564 and TAS2764
In case HDA controller becomes active, but codec is runtime suspended,
jack detection is not successful and no interrupt is raised. This has
been observed with multiple Realtek codecs and HDA controllers from
different vendors. Bug does not occur if both codec and controller are
active, or both are in suspend. Bug can be easily hit on desktop systems
with no built-in speaker.
The problem can be fixed by powering up the codec once after every
controller runtime resume. Even if codec goes back to suspend later, the
jack detection will continue to work. Add a flag to 'hda_codec' to
describe codecs that require this flow from the controller driver.
Modify __azx_runtime_resume() to use pm_request_resume() to make the
intent clearer.
Mark all Realtek codecs with the new forced_resume flag.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209379
Cc: Kailang Yang <kailang@realtek.com>
Co-developed-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201012102704.794423-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
byt-rt5640 is deprecated in favor of bytcr_rt5640 used by
sound/soc/intel/atom and SOF solutions both. Remove redundant machine
board and all related code.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_open() does rollback when failed (A),
but, it is almost same as soc_pcm_close().
static int soc_pcm_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ config_err:
| ...
| rtd_startup_err:
(A) ...
| component_err:
| ...
v return ret;
}
The difference is
soc_pcm_close() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_pcm_close() and rollback.
Now, soc_pcm_open/close() are handling
1) snd_soc_dai_startup/shutdown()
2) snd_soc_link_startup/shutdown()
3) snd_soc_component_module_get/put()
4) snd_soc_component_open/close()
=> 5) pm_runtime_put/get()
This patch is for 5) pm_runtime_put/get().
The idea of having bit-flag or counter is not enough for this purpose.
For example if one DAI is used for 2xPlaybacks for some reasons,
and if 1st Playback was succeeded but 2nd Playback was failed,
2nd Playback rollback doesn't need to call shutdown.
But it has succeeded bit-flag or counter via 1st Playback,
thus, 2nd Playback rollback will call unneeded shutdown.
And 1st Playback's necessary shutdown will not be called,
because bit-flag or counter was cleared by wrong 2nd Playback rollback.
To avoid such case, this patch marks substream pointer when get() was
succeeded. If rollback needed, it will check rollback flag and marked
substream pointer.
One note here is that it cares *current* get() only now.
but we might want to check *whole* marked substream in the future.
This patch is using macro named "push/pop", so that it can be easily
update.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h7ribwnb.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_open() does rollback when failed (A),
but, it is almost same as soc_pcm_close().
static int soc_pcm_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ config_err:
| ...
| rtd_startup_err:
(A) ...
| component_err:
| ...
v return ret;
}
The difference is
soc_pcm_close() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_pcm_close() and rollback.
Now, soc_pcm_open/close() are handling
1) snd_soc_dai_startup/shutdown()
2) snd_soc_link_startup/shutdown()
=> 3) snd_soc_component_module_get/put()
=> 4) snd_soc_component_open/close()
5) pm_runtime_put/get()
This patch is for 3) snd_soc_component_module_get/put()
4) snd_soc_component_open/close().
The idea of having bit-flag or counter is not enough for this purpose.
For example if one DAI is used for 2xPlaybacks for some reasons,
and if 1st Playback was succeeded but 2nd Playback was failed,
2nd Playback rollback doesn't need to call shutdown.
But it has succeeded bit-flag or counter via 1st Playback,
thus, 2nd Playback rollback will call unneeded shutdown.
And 1st Playback's necessary shutdown will not be called,
because bit-flag or counter was cleared by wrong 2nd Playback rollback.
To avoid such case, this patch marks substream pointer when open() was
succeeded. If rollback needed, it will check rollback flag and marked
substream pointer.
One note here is that it cares *current* open() only now.
but we might want to check *whole* marked substream in the future.
This patch is using macro named "push/pop", so that it can be easily
update.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87imbybwno.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_open() does rollback when failed (A),
but, it is almost same as soc_pcm_close().
static int soc_pcm_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ config_err:
| ...
| rtd_startup_err:
(A) ...
| component_err:
| ...
v return ret;
}
The difference is
soc_pcm_close() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_pcm_close() and rollback.
Now, soc_pcm_open/close() are handling
1) snd_soc_dai_startup/shutdown()
=> 2) snd_soc_link_startup/shutdown()
3) snd_soc_component_module_get/put()
4) snd_soc_component_open/close()
5) pm_runtime_put/get()
This patch is for 2) snd_soc_link_startup/shutdown().
The idea of having bit-flag or counter is not enough for this purpose.
For example if one DAI is used for 2xPlaybacks for some reasons,
and if 1st Playback was succeeded but 2nd Playback was failed,
2nd Playback rollback doesn't need to call shutdown.
But it has succeeded bit-flag or counter via 1st Playback,
thus, 2nd Playback rollback will call unneeded shutdown.
And 1st Playback's necessary shutdown will not be called,
because bit-flag or counter was cleared by wrong 2nd Playback rollback.
To avoid such case, this patch marks substream pointer when startup() was
succeeded. If rollback needed, it will check rollback flag and marked
substream pointer.
One note here is that it cares *current* startup() only now.
but we might want to check *whole* marked substream in the future.
This patch is using macro named "push/pop", so that it can be easily
update.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0webwnv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_open() does rollback when failed (A),
but, it is almost same as soc_pcm_close().
static int soc_pcm_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ config_err:
| ...
| rtd_startup_err:
(A) ...
| component_err:
| ...
v return ret;
}
The difference is
soc_pcm_close() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_pcm_close() and rollback.
Now, soc_pcm_open/close() are handling
=> 1) snd_soc_dai_startup/shutdown()
2) snd_soc_link_startup/shutdown()
3) snd_soc_component_module_get/put()
4) snd_soc_component_open/close()
5) pm_runtime_put/get()
This patch is for 1) snd_soc_dai_startup/shutdown().
The idea of having bit-flag or counter is not enough for this purpose.
For example if one DAI is used for 2xPlaybacks for some reasons,
and if 1st Playback was succeeded but 2nd Playback was failed,
2nd Playback rollback doesn't need to call shutdown.
But it has succeeded bit-flag or counter via 1st Playback,
thus, 2nd Playback rollback will call unneeded shutdown.
And 1st Playback's necessary shutdown will not be called,
because bit-flag or counter was cleared by wrong 2nd Playback rollback.
To avoid such case, this patch marks substream pointer when startup() was
succeeded. If rollback needed, it will check rollback flag and marked
substream pointer.
One note here is that it cares *current* startup() only now.
but we might want to check *whole* marked substream in the future.
This patch is using macro named "push/pop", so that it can be easily
update.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfgubwoc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current SOF machine driver adds a name prefix for each codec,
mainly to differentiate ALSA controls for left and right amplifiers.
This is a good idea, but the machine driver duplicates some of the
information that already exists in ACPI descriptors, so add those
prefixes there. Follow-up patches will make use of the information
encoded in these tables and remove duplication.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200923080514.3242858-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use set_jack ops to set jack so machine drivers do not need to include
hdmi-codec.h explicitly.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200922062316.1172935-1-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
To provide backward compatibility to older systems, the SOF HDA driver
allows user to specify which HDMI codec driver to use at runtime via
kernel parameter. This mechanism has a subtle flaw in that it assumes
the codec drivers not to be loaded when the SOF PCI driver is loaded.
The problem is rooted in use of the hdev->type field.
snd_hdac_ext_bus_device_init() initializes this field to HDA_DEV_ASOC.
This signals the HDA core that ASoC drivers should be considered in
driver matching (hda_bus_match()). The SOF and SST drivers continue by
overriding this field to HDA_DEV_LEGACY and proceeding to load driver
modules with request_module(). Correct drivers will get loaded and
attached.
If however the codec drivers are already loaded when
snd_hdac_ext_bus_device_init() is called, the matching will not work as
expected as device type is still set to HDA_DEV_ASOC. Specifically if
hdac-hdmi is attached when machine driver is configured to use hdac-hda,
this leads to out-of-bounds memory access in
hda_dsp_hdmi_build_controls().
Fix the issue by adding codec type as a parameter to
snd_hdac_ext_bus_device_init() and ensuring type is set correctly from
the start.
Fixes: 139c7febad ("ASoC: SOF: Intel: add support for snd-hda-codec-hdmi")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200921100841.2882662-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On i.MX platforms PM is not managed via ACPI although CONFIG_ACPI
can be set. So, in order to correctly set the system target state
we introduce a flag for platforms that require to use acpi target
states.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200921105038.2909899-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This field will be used to compare ldc file with loaded fw version,
to assert validity of trace logs. Value used in sof-logger.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200917105633.2579047-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The tasklet is an old API that should be deprecated, usually can be
converted to another decent API. In ALSA core timer API, the
callbacks can be offlined to a tasklet when a flag is set in the timer
backend. It can be achieved gracefully with a work queued in the
high-prio system workqueue.
This patch replaces the usage of tasklet in ALSA timer API with a
simple work. Currently the tasklet feature is used only in the system
timer and hrtimer backends, so both are patched to use the new flag
name SNDRV_TIMER_HW_WORK, too.
Link: https://lore.kernel.org/r/20200903104131.21097-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This series adds support for UUID based component identification
in SOF. UUIDs provide a more scalable alternative to the old
component type based approach to identify which DSP components
should be loaded.
More detailed description of UUID usage in SOF is available in:
https://thesofproject.github.io/latest/developer_guides/uuid/
UUID support is an incremental update to the SOF IPC interface. Driver
remains compatible with pre-UUID (ABI <3.17) firmware versions.
Keyon Jie (16):
ASoC: SOF: tokens: add token for component UUID
ASoC: SOF: add comp_ext to struct snd_sof_widget
ASoC: SOF: topology: create component extended tokens
ASoC: SOF: topology: parse comp_ext_tokens for all widgets
ASoC: SOF: use the sof_ipc_comp reserved bytes for extended data
ASoC: SOF: topology: add helper for setting up IPC component
ASoC: SOF: append extended data to sof_ipc_comp_dai
ASoC: SOF: append extended data to sof_ipc_comp_mixer
ASoC: SOF: append extended data to sof_ipc_comp_volume
ASoC: SOF: append extended data to sof_ipc_comp_host
ASoC: SOF: append extended data to sof_ipc_comp_src
ASoC: SOF: append extended data to sof_ipc_comp_asrc
ASoC: SOF: append extended data to sof_ipc_comp_tone
ASoC: SOF: append extended data to sof_ipc_comp_process
ASoC: SOF: append extended data to sof_ipc_comp_mux
ASoC: SOF: topology: make process type optional
include/sound/sof/topology.h | 12 +-
include/uapi/sound/sof/tokens.h | 1 +
sound/soc/sof/sof-audio.c | 23 +++-
sound/soc/sof/sof-audio.h | 3 +
sound/soc/sof/topology.c | 208 ++++++++++++++++++++------------
5 files changed, 161 insertions(+), 86 deletions(-)
--
2.27.0
Use the 32bit reserved member of the struct sof_ipc_comp as the extended
data length, this will help to minimize the ABI change for adding new
extended data to the struct sof_ipc_comp, usually only minor ABI version
bump needed for every update with this new solution.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-6-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add member comp_ext to struct snd_sof_widget, which will be used for
topology extended tokens parsing.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previous changes move to use ERR_PTR(-ENOTSUPP), but it's not clear
what implementations can return in case of errors. Explicitly document
that NULL is not a possible return value, only ERR_PTR with a negative
error code is valid.
Fixes: 308811a327 ('ASoC: soc-dai: return proper error for get_sdw_stream()')
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200904182854.3944-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce for_each_rtd_dais_rollback macro which behaves exactly like
for_each_codec_dais_rollback and its cpu_dais equivalent but for all
dais instead.
Use newly added macro to fix soc_pcm_open error path and prevent
uninitialized dais from being cleaned-up.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Fixes: 5d9fa03e6c ("ASoC: soc-pcm: tidyup soc_pcm_open() order")
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200907111939.16169-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 25612477d2 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper")
added snd_soc_dai_link_set_capabilities().
But it is using snd_soc_find_dai() (A) which is required client_mutex (B).
And client_mutex is soc-core.c local.
struct snd_soc_dai *snd_soc_find_dai(xxx)
{
...
(B) lockdep_assert_held(&client_mutex);
...
}
void snd_soc_dai_link_set_capabilities(xxx)
{
...
for_each_pcm_streams(direction) {
...
for_each_link_cpus(dai_link, i, cpu) {
(A) dai = snd_soc_find_dai(cpu);
...
}
...
for_each_link_codecs(dai_link, i, codec) {
(A) dai = snd_soc_find_dai(codec);
...
}
}
...
}
Because of these background, we will get WARNING if .config has CONFIG_LOCKDEP.
WARNING: CPU: 2 PID: 53 at sound/soc/soc-core.c:814 snd_soc_find_dai+0xf8/0x100
CPU: 2 PID: 53 Comm: kworker/2:1 Not tainted 5.7.0-rc1+ #328
Hardware name: Renesas H3ULCB Kingfisher board based on r8a77951 (DT)
Workqueue: events deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : snd_soc_find_dai+0xf8/0x100
lr : snd_soc_find_dai+0xf4/0x100
...
Call trace:
snd_soc_find_dai+0xf8/0x100
snd_soc_dai_link_set_capabilities+0xa0/0x16c
graph_dai_link_of_dpcm+0x390/0x3c0
graph_for_each_link+0x134/0x200
graph_probe+0x144/0x230
platform_drv_probe+0x5c/0xb0
really_probe+0xe4/0x430
driver_probe_device+0x60/0xf4
snd_soc_find_dai() will be used from (X) CPU/Codec/Platform driver with
mutex lock, and (Y) Card driver without mutex lock.
This snd_soc_dai_link_set_capabilities() is for Card driver,
this means called without mutex.
This patch adds snd_soc_find_dai_with_mutex() to solve it.
Fixes: 25612477d2 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blixvuab.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 25612477d2 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper")
added snd_soc_dai_link_set_capabilities().
But it is using snd_soc_find_dai() (A) which is required client_mutex (B).
And client_mutex is soc-core.c local.
struct snd_soc_dai *snd_soc_find_dai(xxx)
{
...
(B) lockdep_assert_held(&client_mutex);
...
}
void snd_soc_dai_link_set_capabilities(xxx)
{
...
for_each_pcm_streams(direction) {
...
for_each_link_cpus(dai_link, i, cpu) {
(A) dai = snd_soc_find_dai(cpu);
...
}
...
for_each_link_codecs(dai_link, i, codec) {
(A) dai = snd_soc_find_dai(codec);
...
}
}
...
}
Because of these background, we will get WARNING if .config has CONFIG_LOCKDEP.
WARNING: CPU: 2 PID: 53 at sound/soc/soc-core.c:814 snd_soc_find_dai+0xf8/0x100
CPU: 2 PID: 53 Comm: kworker/2:1 Not tainted 5.7.0-rc1+ #328
Hardware name: Renesas H3ULCB Kingfisher board based on r8a77951 (DT)
Workqueue: events deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : snd_soc_find_dai+0xf8/0x100
lr : snd_soc_find_dai+0xf4/0x100
...
Call trace:
snd_soc_find_dai+0xf8/0x100
snd_soc_dai_link_set_capabilities+0xa0/0x16c
graph_dai_link_of_dpcm+0x390/0x3c0
graph_for_each_link+0x134/0x200
graph_probe+0x144/0x230
platform_drv_probe+0x5c/0xb0
really_probe+0xe4/0x430
driver_probe_device+0x60/0xf4
snd_soc_find_dai() will be used from (X) CPU/Codec/Platform driver with
mutex lock, and (Y) Card driver without mutex lock.
This snd_soc_dai_link_set_capabilities() is for Card driver,
this means called without mutex.
This patch adds snd_soc_find_dai_with_mutex() to solve it.
Fixes: 25612477d2 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blixvuab.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It should be called VS_LTRP instead.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200826184532.1612070-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The debug ABI can be extracted from the extended manifest content.
This information known at build time does not need to be provided
in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200825235854.1588034-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This step is needed to add possibility to pack sof_ipc_window inside
another one in used FW build tools - for example in extended manifest.
Structure reusability leads to easy parsing function reuse, so source
code is shorter and easier to maintain.
Using structures with constant size is less tricky and properly
supported by each toolchain by contrast to variable size elements.
This is minor ABI change - backward compatibility is kept.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200825235854.1588034-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We use HDaudio and HDAudio, pick one to make searches easier.
No functionality change
Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200824200912.46852-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
simple-card.c and meson-card-utils.c use pretty much the same
helper function to parse auxiliary devices from the device tree.
Make it easier for other drivers to parse these from the device tree
as well by adding a shared helper function to soc-core.c.
snd_soc_of_parse_aux_devs() is pretty much a copy of
meson_card_add_aux_devices() from meson-card-utils.c
with two minor changes:
- Make property name configurable as parameter
- Change dev_err() message slightly for consistency with other
error messages in soc-core.c
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200801100257.22658-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
A variable dma_stop_delay is added as a new member in hdac_bus
structure to avoid memory decode error incase DMA RUN bit is not
disabled in the given timeout from snd_hdac_stream_sync function and
followed by stream reset which results in memory decode error between
reset set and clear operation.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20200805095221.5476-3-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The biggest changes here one again come from Mormioto-san who has
continued his dilligent work cleaning up long standing issues in the
APIs, it's particularly nice to see the transition from digital_mute()
to mute_stream() finally completed. There's also been a lot of work on
the x86 code again, this time a big focus has been on cleaning up some
issues identified by various static tests, and on the Freescale systems.
Otherwise the biggest thing has been a lot of driver additions:
- Convert users of digital_mute() to mute_stream().
- Simplify I/O helper functions.
- Add a helper for getting the RTD from a substream.
- Many, many fixes and cleanups to the x86 code.
- New drivers for Freescale MQS and i.MX6sx, Intel KeemBay I2S, Maxim
MAX98360A and MAX98373 Soundwire, several Mediatek boards, nVidia
Tegra 186 and 210, RealTek RL6231, Samsung Midas and Aries boards (some
of the first phones I worked on!) and TI J721e EVM.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl8n96MTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0FApB/sFAbX/RWXiH5fBRQnGsfvLznORx9pA
90xR+BgpybawRgTk4Bi87sY5lBI44S4OwUqqI58D+/GD7uchgY2Z2m+4flF9GbDU
VTOvChqL0ZpDh2Crr2+BkSlVjZsA3h0e86W/0qoq3/q4dgb7ZfcLJ2w7A+UDq+kP
tKKqi3mTxXuM78N3Vp8/IobIRpo/fi3Oy2aB+WOiAUD6rV88yzx+QgNkvzwvTcpm
y8ejr2zYPYLHLshUh2S7HJaGyX7NjggGVaUolJtfGT+ArAP6j3JIxikC3Mr9TImd
qaX2BsHNE1XARK8KQXA5qTP7++RlewSSxblpoVRFZwV70On9/L5W4GPp
=OO0s
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.9' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.9
The biggest changes here one again come from Mormioto-san who has
continued his dilligent work cleaning up long standing issues in the
APIs, it's particularly nice to see the transition from digital_mute()
to mute_stream() finally completed. There's also been a lot of work on
the x86 code again, this time a big focus has been on cleaning up some
issues identified by various static tests, and on the Freescale systems.
Otherwise the biggest thing has been a lot of driver additions:
- Convert users of digital_mute() to mute_stream().
- Simplify I/O helper functions.
- Add a helper for getting the RTD from a substream.
- Many, many fixes and cleanups to the x86 code.
- New drivers for Freescale MQS and i.MX6sx, Intel KeemBay I2S, Maxim
MAX98360A and MAX98373 Soundwire, several Mediatek boards, nVidia
Tegra 186 and 210, RealTek RL6231, Samsung Midas and Aries boards (some
of the first phones I worked on!) and TI J721e EVM.
Modify snd_soc_add_component so it calls snd_soc_component_initialize
no longer and thus providing true two-step registration. Drivers may
choose to change component's fields before actually adding it to ASoC
subsystem.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200731144146.6678-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move 'name' field initialization responsibility back to
snd_soc_component_initialize to prepare snd_soc_add_component function
for being called separatelly as a second registration step.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200731144146.6678-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To allow for two-step component registration, expose
snd_soc_component_initialize function and move it back to soc-core.c.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200731144146.6678-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc-xxx are getting rtd from substream by
rtd = substream->private_data;
But, getting data from "private_data" is very unclear.
This patch adds asoc_substream_to_rtd() macro which is
easy to understand that rtd from substream.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wo2z0yve.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All drivers are now using .mute_stream.
Let's remove .digital_mute.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87h7u72dqz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow the recent inclusive terminology guidelines and replace the
word "slave" in vmaster API. I chose the word "follower" at this time
since it seems fitting for the purpose.
Note that the word "master" is kept in API, since it refers rather to
audio master volume control.
Also, while we're at it, a typo in comments is corrected, too.
Link: https://lore.kernel.org/r/20200717154517.27599-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719151705.59624-1-grandmaster@al2klimov.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
An awful lot of mostly small fixes here, mainly for x86 based platforms
and the CODEC drivers mainly used on them. For the most part this is
either minor device specific stuff which seems to come from detailed
testing or robustness against errors which comes from people having done
some fuzzing runs aginst the topology code.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl8Rzk0THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0GWlB/9Y6g9MQ4Ih4Evsv4q/ZeJRnTGaKZMT
7XjZRB64tTrFWbt38iGpRcjQLy5I5tVuGbdd7mPVKgZgSVxvoj4HQ4vf23rkNxon
RuQIbFtI2rwvdWKDo9a0RkF+IwuWhmrupfN8DMZoJIyRyh99tDrLwGjmiUUXsVV2
NyfcGerQjbngraK+2lQtnzbfX9d2qGiZVKEdczQVjJcgyNAYI2N22+3O1hFHmo80
6f5BbRpaVPXpQmRBmFthTdgthrr6uZPDXDoEYw77V9okvCwthrjBIGDow4EkVTZk
xRPKo7g2EFuLd18ro/J8nAJ1KDideKB4I5cFcz9QViVZbVftk2CrFrvg
=V/55
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.8-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.8
An awful lot of mostly small fixes here, mainly for x86 based platforms
and the CODEC drivers mainly used on them. For the most part this is
either minor device specific stuff which seems to come from detailed
testing or robustness against errors which comes from people having done
some fuzzing runs aginst the topology code.
soc-dai is using discriminatory terms for comment.
This patch renames "slave" to "secondary", thus
we can keep M/S initials.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875zam3bmk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi,
this small series is preparation for a set of bugfix ASoC patches
addressing a memleak at module unload for the HDA codec wrapper.
Instead of duplicating HDA code in ASoC tree, I chose to export
more functionality from hda_codec.c so it can be (re)used in ASoC's
hdac_hda.c.
Full series:
https://github.com/thesofproject/linux/pull/2252
Takashi and Mark, feedback is welcome on how to best handle this
kind of series where I have dependent patches both in sound/pci/hda
and in ASoC. For this series, I'm sending the patches separately
and when/if first set is merged by Takashi, I'll route the ASoC
patches via our usually SOF set to Mark.
Kai Vehmanen (2):
ALSA: hda: export snd_hda_codec_cleanup_for_unbind()
ALSA: hda: fix snd_hda_codec_cleanup() documentation
include/sound/hda_codec.h | 2 ++
sound/pci/hda/hda_codec.c | 3 ++-
2 files changed, 4 insertions(+), 1 deletion(-)
--
2.27.0
Support hp and mic detection.
Add a parameter for asoc_simple_init_jack.
Shengjiu Wang (3):
ASoC: simple-card-utils: Support configure pin_name for
asoc_simple_init_jack
ASoC: bindings: fsl-asoc-card: Support hp-det-gpio and mic-det-gpio
ASoC: fsl-asoc-card: Support Headphone and Microphone Jack detection
changes in v2:
- Add more comments in third commit
- Add Acked-by Nicolin.
.../bindings/sound/fsl-asoc-card.txt | 3 +
include/sound/simple_card_utils.h | 6 +-
sound/soc/fsl/Kconfig | 1 +
sound/soc/fsl/fsl-asoc-card.c | 77 ++++++++++++++++++-
sound/soc/generic/simple-card-utils.c | 7 +-
5 files changed, 86 insertions(+), 8 deletions(-)
--
2.27.0
Currently the pin_name is fixed in asoc_simple_init_jack, but some driver
may use a different pin_name. So add a new parameter in
asoc_simple_init_jack for configuring pin_name.
If this parameter is NULL, then the default pin_name is used.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1594822179-1849-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
For hdmi-codec, we need to update struct hdmi_codec_ops,
and all its users in the same time.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87d055xxj2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling "direction".
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
To prepare merging mute_stream()/digital_mute(),
this patch adds .no_capture_mute support to emulate .digital_mute().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87eeplxxj7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To avoid duplicated code for cleanup, and match the already exported
snd_hda_codec_pcm_new(), also export snd_hda_codec_cleanup_for_unbind().
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200715174551.3730165-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While experimenting and introducing errors in Baytrail topology files
until I got them right, I encountered multiple kernel oopses and
memory leaks. This is a first batch to harden the code, but we should
probably think of a tool to fuzz the topology...
Pierre-Louis Bossart (5):
ASoC: topology: fix kernel oops on route addition error
ASoC: topology: fix tlvs in error handling for widget_dmixer
ASoC: topology: use break on errors, not continue
ASoC: topology: factor kfree(se) in error handling
ASoC: topology: add more logs when topology load fails.
sound/soc/soc-topology.c | 97 ++++++++++++++++++++++++----------------
1 file changed, 58 insertions(+), 39 deletions(-)
base-commit: a5911ac579
--
2.25.1
Add a helper to walk through all the DAIs and set dpcm_playback and
dpcm_capture flags based on the DAIs capabilities, and use this helper
to avoid setting these flags arbitrarily in generic cards.
The commit referenced in the Fixes tag did not introduce the
configuration issue but will prevent the card from probing when
detecting invalid configurations.
Fixes: b73287f0b0 ('ASoC: soc-pcm: dpcm: fix playback/capture checks')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200707210439.115300-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC devm_ functions that register a component
(devm_snd_soc_register_component and devm_snd_dmaengine_pcm_register) will
clean their component by running snd_soc_unregister_component.
snd_soc_unregister_component will then remove all the components for the
device that was used to register the component in the first place.
However, some drivers register several components (such as a DAI and a
dmaengine PCM) on the same device, and if the dmaengine PCM is registered
first, then the DAI will be cleaned up first and
snd_dmaengine_pcm_unregister will be called next.
snd_dmaengine_pcm_unregister will then lookup the dmaengine PCM component
on the device, and if there's one unregister that component and release its
dmaengine channels. That doesn't happen in practice though since the first
call to snd_soc_unregister_component removed all the components, so we
never get the chance to release the dmaengine channels.
In order to fix this, instead of removing all the components for a given
device, we can simply remove the component that was registered in the first
place. We should have the same number of component registration than we
have components, so it should work just fine.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200707074237.287171-1-maxime@cerno.tech
Signed-off-by: Mark Brown <broonie@kernel.org>
On partial_drain completion we should be in SNDRV_PCM_STATE_RUNNING
state, so set that for partially draining streams in
snd_compr_drain_notify() and use a flag for partially draining streams
While at it, add locks for stream state change in
snd_compr_drain_notify() as well.
Fixes: f44f2a5417 ("ALSA: compress: fix drain calls blocking other compress functions (v6)")
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200629134737.105993-4-vkoul@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
platform_data is an obsolete concept, instead device_properties,
set through e.g. device-tree, should be used.
struct rt5670_platform_data is only used internally by the rt5670 codec
driver, so lets remove it before someone starts relying on it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200703100823.258033-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Lenovo Miix 2 10 has a keyboard dock with extra speakers in the dock.
Rather then the ACL5672's GPIO1 pin being used as IRQ to the CPU, it is
actually used to enable the amplifier for these speakers
(the IRQ to the CPU comes directly from the jack-detect switch).
Add a quirk for having an ext speaker-amplifier enable pin on GPIO1
and replace the Lenovo Miix 2 10's dmi_system_id table entry's wrong
GPIO_DEV quirk (which needs to be renamed to GPIO1_IS_IRQ) with the
new RT5670_GPIO1_IS_EXT_SPK_EN quirk, so that we enable the external
speaker-amplifier as necessary.
Also update the ident field for the dmi_system_id table entry, the
Miix models are not Thinkpads.
Fixes: 67e03ff3f3 ("ASoC: codecs: rt5670: add Thinkpad Tablet 10 quirk")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786723
Link: https://lore.kernel.org/r/20200628155231.71089-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To fix compilation warnings:
- struct 'snd_soc_pcm_runtime' declared inside parameter list will not
be visible outside of this definition or declaration
- struct 'soc_enum' declared inside parameter list will not be visible
outside of this definition or declaration
Declares the missing structure prototypes.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200625153543.85039-3-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To fix compilation error:
- error: field 'XXX' has incomplete type
Moves definition of enum snd_soc_bias_level from soc.h to soc-dapm.h.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200625153543.85039-2-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some machine drivers allocate or request resources with
snd_soc_link_init() phase of the card probe. These resources need to
be properly released when removing a card, and this patch suggests a
dual exit() callback.
The exit() is invoked in soc_remove_pcm_runtime(), which is not
completely symmetric with the init() invoked in soc_init_pcm_runtime().
Alternate solutions were considered, e.g. adding a .remove() callback
for the platform driver, but that's not symmetrical at all and would
be difficult to handle if there are more than one dailink implementing
an .init(). We looked also into using .remove_dai_link() callback, but
that would also be imbalanced.
Note that because of the error handling in snd_soc_bind_card(), which
jumps to probe_end, there is no way to guarantee the exit() is invoked
with resources allocated in the init(). Prior to releasing those
resources, implementations of the exit() callback shall check the
resources are valid.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Link: https://lore.kernel.org/r/20200622154241.29053-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We had read/write function for Codec, Platform, etc,
but these has been merged into snd_soc_component_read/write().
Internally, it is using regmap or driver function.
In read case, each styles are like below
regmap
ret = regmap_read(..., reg, &val);
driver function
val = xxx->read(..., reg);
Because of this kind of different style, to keep same read style,
when we merged each read function into snd_soc_component_read(),
we created snd_soc_component_read32(), like below.
commit 738b49efe6 ("ASoC: add snd_soc_component_read32")
(1) val = snd_soc_component_read32(component, reg);
(2) ret = snd_soc_component_read(component, reg, &val);
Many drivers are using snd_soc_component_read32(), and
some drivers are using snd_soc_component_read() today.
In generally, we don't check read function successes,
because, we will have many other issues at initial timing
if read function didn't work.
Now we can use soc_component_err() when error case.
This means, it is easy to notice if error occurred.
This patch aggressively merge snd_soc_component_read() and _read32(),
and makes snd_soc_component_read/write() as generally style.
This patch do
1) merge snd_soc_component_read() and snd_soc_component_read32()
2) it uses soc_component_err() when error case (easy to notice)
3) keeps read32 for now by #define
4) update snd_soc_component_read() for all drivers
Because _read() user drivers are not too many, this patch changes
all user drivers.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/87sgev4mfl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a collection of mostly small fixes, mostly fixing fallout from
some of the DPCM changes that went in last time around which shook out
some issues on i.MX and Qualcomm platforms. The addition of a managed
version of snd_soc_register_dai() is to fix resource leaks.
There's also a few new device IDs for x86 systems.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl7wlcQTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0K9NB/0e4qOoGEyxmf6rbAnT1zvBu0vQu2qR
ABkcCztt/tS/QJ1BSDHX/hALj9jr6RuAtn1pL4ynVGxJ86TByrrwLX1WhtKTk+DW
TEgiPrFAKLlCwLVxgFdF0LORicv5zZEehi9+zP1HKt31Zsv2KNvTtwaF1WymIEd5
LYVvYhtAKMmpjPN2WjlDSuita+fc/e5dm26n8hi3DJKIBVsLBbSxd1s1kwlqqnPh
KbJjVrp5sWNhCyKu2hW8Sv1ovh40WbZ1TnzlDTiLinz0TCyqUyqEatuJ4RgRLmsW
G3IAvm0rNjqyIF8TbQvYvvMZ0BZe/2SHdNXBtOXjXUYxhmnLvfAXocTf
=FNgB
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.8-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.8
This is a collection of mostly small fixes, mostly fixing fallout from
some of the DPCM changes that went in last time around which shook out
some issues on i.MX and Qualcomm platforms. The addition of a managed
version of snd_soc_register_dai() is to fix resource leaks.
There's also a few new device IDs for x86 systems.
Add two platform variables for headphone jack detection.
"hp_cfg" is for configuration of heaphone jack detection.
"gpio_cfg" is for configuration of gpio, the gpio is used
for plug & unplug interrupt on SoC.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1591180013-12416-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch add missing company copyright
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87eeqvw8w8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
we wantn't to directly access to component related parameter
as much as possible to keep encapsulation.
This patch adds snd_soc_component_init() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87img7w8x2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_component_xxx() is focusing to component itself,
snd_soc_pcm_component_xxx() is focusing to rtd related component.
Now we can update snd_soc_component_trigger() to
snd_soc_pcm_component_trigger(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87k10nw8xf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_component_xxx() is focusing to component itself,
snd_soc_pcm_component_xxx() is focusing to rtd related component.
Now we can update snd_soc_component_hw_free() to
snd_soc_pcm_component_hw_free(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87lfl3w8xv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_component_xxx() is focusing to component itself,
snd_soc_pcm_component_xxx() is focusing to rtd related component.
Now we can update snd_soc_component_hw_params() to
snd_soc_pcm_component_hw_params(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87mu5jw8y8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_component_xxx() is focusing to component itself,
snd_soc_pcm_component_xxx() is focusing to rtd related component.
Now we can update snd_soc_component_prepare() to
snd_soc_pcm_component_prepare(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87o8pzw8yl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_component_xxx() should be implemented at soc-component.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87r1uvw8zb.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-component is handling snd_soc_component_xxx().
Move snd_soc_component_xxx_regmap() to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87sgfbw8zl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have a few helper functions for making the access to the buffer
address easier on SG-buffer. Those are specific to the buffer that is
allocated with SG-buffer type, and it makes hard to use both SG and
non-SG buffers in the same code.
This patch adds a few simple checks and lets the helpers to deal with
both SG- and continuous buffers gracefully. It's a preliminary step
for the upcoming patch that mimics the buffer type on the fly.
Link: https://lore.kernel.org/r/20200615160045.2703-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The registration of DAIs may be done at two distinct times, once
during a component registration and later when loading a
topology. Since devm_ managed resources are freed in the reverse order
they were allocated, when a component starts unregistering DAIs by
walking through the DAI list, the memory allocated for the
topology-registered DAIs was freed already, which leads to 100%
reproducible KASAN use-after-free reports.
This patch suggests a new devm_ function to force the DAI list to be
updated prior to freeing the memory chunks referenced by the list
pointers.
Suggested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
BugLink: https://github.com/thesofproject/linux/issues/2186
Link: https://lore.kernel.org/r/20200612205938.26415-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_lookup_component_nolocked can be used for the DPCM case
that Front-End needs to get the unused platform component but
added by Back-End cpu dai driver.
If the component is gotten, then we can get the dma chan created
by Back-End component and reused it in Front-End.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/55f6e0d76f67a517b9a44136d790ff2a06b5caa8.1591947428.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This has been another very active release with a bunch of new drivers,
lots of fixes everywhere and continued core improvements from
Morimoto-san:
- Lots of core cleanups and refactorings from Morimoto-san, factoring
out common operations and making the card abstraction more solid.
- Continued work on cleaning up and improving the Intel drivers, along
with some new platform support for them.
- Fixes to make the Marvell SSPA driver work upstream.
- Support for AMD Renoir ACP, Dialog DA7212, Freescale EASRC and
i.MX8M, Intel Elkhard Lake, Maxim MAX98390, Nuvoton NAU8812 and
NAU8814 and Realtek RT1016.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl7U8IoTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0PkwB/0UF8YoNrLFb9wqo62sUAPYp2d9t6AW
qDmRdNoULlT+diyr3ufQOaW7yMgVfSN1ek2btl/IDhuy96lIVb1tVPs7mJvxDOqk
P/a5jxl0mWn0bmuMaajShtPc/IL2GAnYoLGIWZS+2U5CCQonKUL95DdlMcWn44lt
lMa6jK9KfCMMbaocic24XmZDYfyxhRBpKWQC7Mq/i6pw3yZgOTSUCkS42Koy6NXs
aDMHgCZKutigzEEZEDWDJ9LWqplALAQAiEUoKDWXBDBQ94nWbKkwjig4WDtC8Wao
sgCubdWM4fvLf102PcAkn0xYDC68zNSS3NuZTp7k5gyXzkepoyCfKviX
=8UOT
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.8' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.8
This has been another very active release with a bunch of new drivers,
lots of fixes everywhere and continued core improvements from
Morimoto-san:
- Lots of core cleanups and refactorings from Morimoto-san, factoring
out common operations and making the card abstraction more solid.
- Continued work on cleaning up and improving the Intel drivers, along
with some new platform support for them.
- Fixes to make the Marvell SSPA driver work upstream.
- Support for AMD Renoir ACP, Dialog DA7212, Freescale EASRC and
i.MX8M, Intel Elkhard Lake, Maxim MAX98390, Nuvoton NAU8812 and
NAU8814 and Realtek RT1016.
Card related function should be implemented at soc-card now.
This patch adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87mu5szv2h.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch adds it.
This patch adds missing return when error case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87o8q8zv2m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87pnaozv2s.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87sgfkzv4g.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87tv00zv4p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch adds it.
card has "card->probe" and "card->late_probe" callbacks,
and "late_probe" callback is called after "probe".
This means, we can set "card->probed" flag afer "late_probe"
for all cases.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87v9kgzv4w.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch adds it.
One note here is that card has "card->probe" and "card->late_probe"
callbacks.
Because it needs to care "late_probe", "card->probed" flag is set
under if (card->probe) at snd_soc_card_probe().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87wo4wzv54.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We already have bit field to control snd_soc_card.
Let's add "probed" field on it instead of local variable.
One note here is that soc_cleanup_card_resources()
will be called as (A) formal cleanup or as (B) error handling,
thus, it needs to distinguish these.
In (A) case, card will have "instantiated" flag if all probe
callback functions were called without error.
Thus, snd_soc_unbind_card() is using it to judging card was probed.
But this this patch removes it, because it is no longer needed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87r1v4zv36.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87y2pczv5d.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87zh9szv5k.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/871rn425j3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87367k25jc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch moves it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/874ks025jn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch moves it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/875zcg25jv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch moves it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/877dww25k4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch moves it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/878shc25kc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch moves it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87a71s25kj.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ALSA SoC has some snd_soc_card_xxx() functions,
and card->xxx() callbacks.
But, it is implemented randomly at random place.
To collect all card related functions into one place,
this patch creats new soc-card.c.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87blm825kt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_card has many bool, but it can be bit field.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87d06o25l2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The newly added CODEC to CODEC DAI link widget pointers in
snd_soc_dai_link are better placed in snd_soc_pcm_runtime.
snd_soc_dai_link is really intended for static configuration of
the DAI, and the runtime for dynamic data. The snd_soc_dai_link
structures are not destroyed if the card is unbound. The widgets
are cleared up on unbind, however if the card is rebound as the
snd_soc_dai_link structures are reused these pointers will be left at
their old values, causing access to freed memory.
Fixes: 595571cca4 ("ASoC: dapm: Fix regression introducing multiple copies of DAI widgets")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200526161930.30759-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi Mark
Current ALSA SoC is handling dai_link related operation,
but it is implmemented directly without using function/macro,
and at random place.
This v4 patch-set creates new snd_soc_link_xxx() functions
which handles dai_link related operation,
and implmement these at new soc-link.c.
v3 -> v4
- add Reviewed-by from Ranjani and Pierre-Louis
- fix bisection error at [2/7]
v2 -> v3
- add missing #include <sound/soc-link.h> in soc-link.c
v1 -> v2
- #include <sound/soc-link.h> is added on each c source file
instead of soc.h
- not have extra error message after snd_soc_link_xxx(),
because it already indicate it via snc_link_ret()
- snd_soc_link_compr_xxx() doesn't have rtd parameter,
because it can be created from cstream
Link: https://lore.kernel.org/r/87lflk4yk3.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/874ksa59wc.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/877dx868op.wl-kuninori.morimoto.gx@renesas.com
Kuninori Morimoto (7):
ASoC: add soc-link.c
ASoC: soc-link: move soc_rtd_xxx()
ASoC: soc-link: remove unneeded parameter from snd_soc_link_xxx()
ASoC: soc-link: add snd_soc_link_be_hw_params_fixup()
ASoC: soc-link: add snd_soc_link_compr_startup()
ASoC: soc-link: add snd_soc_link_compr_shutdown()
ASoC: soc-link: add snd_soc_link_compr_set_params()
include/sound/soc-link.h | 27 +++++++
sound/soc/Makefile | 2 +-
sound/soc/soc-compress.c | 46 ++++--------
sound/soc/soc-core.c | 18 ++---
sound/soc/soc-dai.c | 9 ++-
sound/soc/soc-link.c | 150 +++++++++++++++++++++++++++++++++++++++
sound/soc/soc-pcm.c | 86 ++++------------------
7 files changed, 219 insertions(+), 119 deletions(-)
create mode 100644 include/sound/soc-link.h
create mode 100644 sound/soc/soc-link.c
--
2.17.1
Thank you for your help !!
Best regards
---
Kuninori Morimoto
The compiler version and description can be extracted from the
extended manifest content. This information known at build time
does not need to be provided in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200520165911.21696-6-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The window description can be extracted from the extended manifest
content. This information known at build time does not need to be
provided in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200520165911.21696-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware version can be extracted from the extended
manifest content. This information known at build time
does not need to be provided in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200520165911.21696-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extended manifest is a place to store build time known firmware
metadata, for example firmware version or used compiler description.
Given information is read on host side before firmware startup.
This part of output binary is located as a first structure in binary
file.
Extended manifest should be skipped in firmware loading routine.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200520165911.21696-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai_link related function should be implemented at soc-link.c.
This patch adds snd_soc_link_compr_set_params().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87sgfo3k6q.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai_link related function should be implemented at soc-link.c.
This patch adds snd_soc_link_compr_shutdown().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87tv043k6u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>