Pull x86/mm changes from Ingo Molnar:
"The biggest change is new TLB partial flushing code for AMD CPUs.
(The v3.6 kernel had the Intel CPU side code, see commits
e0ba94f14f74..effee4b9b3b.)
There's also various other refinements around the TLB flush code"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Distinguish TLB shootdown interrupts from other functions call interrupts
x86/mm: Fix range check in tlbflush debugfs interface
x86, cpu: Preset default tlb_flushall_shift on AMD
x86, cpu: Add AMD TLB size detection
x86, cpu: Push TLB detection CPUID check down
x86, cpu: Fixup tlb_flushall_shift formatting
Pull x86/MCE update from Ingo Molnar:
"Various MCE robustness enhancements.
One of the changes adds CMCI (Corrected Machine Check Interrupt) poll
mode on Intel Nehalem+ CPUs, which mode is automatically entered when
the rate of messages is too high - and exited once the storm is over.
An MCE events storm will roughly look like this:
[ 5342.740616] mce: [Hardware Error]: Machine check events logged
[ 5342.746501] mce: [Hardware Error]: Machine check events logged
[ 5342.757971] CMCI storm detected: switching to poll mode
[ 5372.674957] CMCI storm subsided: switching to interrupt mode
This should make such events more survivable"
* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Provide boot argument to honour bios-set CMCI threshold
x86, MCE: Remove unused defines
x86, mce: Enable MCA support by default
x86/mce: Add CMCI poll mode
x86/mce: Make cmci_discover() quiet
x86: mce: Remove the frozen cases in the hotplug code
x86: mce: Split timer init
x86: mce: Serialize mce injection
x86: mce: Disable preemption when calling raise_local()
Pull x86/fpu update from Ingo Molnar:
"The biggest change is the addition of the non-lazy (eager) FPU saving
support model and enabling it on CPUs with optimized xsaveopt/xrstor
FPU state saving instructions.
There are also various Sparse fixes"
Fix up trivial add-add conflict in arch/x86/kernel/traps.c
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, kvm: fix kvm's usage of kernel_fpu_begin/end()
x86, fpu: remove cpu_has_xmm check in the fx_finit()
x86, fpu: make eagerfpu= boot param tri-state
x86, fpu: enable eagerfpu by default for xsaveopt
x86, fpu: decouple non-lazy/eager fpu restore from xsave
x86, fpu: use non-lazy fpu restore for processors supporting xsave
lguest, x86: handle guest TS bit for lazy/non-lazy fpu host models
x86, fpu: always use kernel_fpu_begin/end() for in-kernel FPU usage
x86, kvm: use kernel_fpu_begin/end() in kvm_load/put_guest_fpu()
x86, fpu: remove unnecessary user_fpu_end() in save_xstate_sig()
x86, fpu: drop_fpu() before restoring new state from sigframe
x86, fpu: Unify signal handling code paths for x86 and x86_64 kernels
x86, fpu: Consolidate inline asm routines for saving/restoring fpu state
x86, signal: Cleanup ifdefs and is_ia32, is_x32
Pull x86 debug update from Ingo Molnar:
"Various small enhancements"
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/debug: Dump family, model, stepping of the boot CPU
x86/iommu: Use NULL instead of plain 0 for __IOMMU_INIT
x86/iommu: Drop duplicate const in __IOMMU_INIT
x86/fpu/xsave: Keep __user annotation in casts
x86/pci/probe_roms: Add missing __iomem annotation to pci_map_biosrom()
x86/signals: ia32_signal.c: add __user casts to fix sparse warnings
x86/vdso: Add __user annotation to VDSO32_SYMBOL
x86: Fix __user annotations in asm/sys_ia32.h
Pull x86/cpu and x86/cpufeature from Ingo Molnar:
"One tiny cleanup, and prepare for SMAP (Supervisor Mode Access
Prevention) support on x86"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Remove the useless branch in c_start()
* 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, cpufeature: Add feature bit for SMAP
Pull x86/asm changes from Ingo Molnar:
"The one change that stands out is the alternatives patching change
that prevents us from ever patching back instructions from SMP to UP:
this simplifies things and speeds up CPU hotplug.
Other than that it's smaller fixes, cleanups and improvements."
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Unspaghettize do_trap()
x86_64: Work around old GAS bug
x86: Use REP BSF unconditionally
x86: Prefer TZCNT over BFS
x86/64: Adjust types of temporaries used by ffs()/fls()/fls64()
x86: Drop unnecessary kernel_eflags variable on 64-bit
x86/smp: Don't ever patch back to UP if we unplug cpus
Pull x86/apic changes from Ingo Molnar:
"Smaller fixes and cleanups"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/api: Rename mp_register_lapic in a comment
x86/irq/i8259: Fix incorrect comment
x86: dt: Use linear irq domain for ioapic(s)
Pull perf fix from Ingo Molnar:
"Leftover perf/urgent fix from the v3.6 cycle"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix typo in uncore_pmu_to_box
Pull perf update from Ingo Molnar:
"Lots of changes in this cycle as well, with hundreds of commits from
over 30 contributors. Most of the activity was on the tooling side.
Higher level changes:
- New 'perf kvm' analysis tool, from Xiao Guangrong.
- New 'perf trace' system-wide tracing tool
- uprobes fixes + cleanups from Oleg Nesterov.
- Lots of patches to make perf build on Android out of box, from
Irina Tirdea
- Extend ftrace function tracing utility to be more dynamic for its
users. It allows for data passing to the callback functions, as
well as reading regs as if a breakpoint were to trigger at function
entry.
The main goal of this patch series was to allow kprobes to use
ftrace as an optimized probe point when a probe is placed on an
ftrace nop. With lots of help from Masami Hiramatsu, and going
through lots of iterations, we finally came up with a good
solution.
- Add cpumask for uncore pmu, use it in 'stat', from Yan, Zheng.
- Various tracing updates from Steve Rostedt
- Clean up and improve 'perf sched' performance by elliminating lots
of needless calls to libtraceevent.
- Event group parsing support, from Jiri Olsa
- UI/gtk refactorings and improvements from Namhyung Kim
- Add support for non-tracepoint events in perf script python, from
Feng Tang
- Add --symbols to 'script', similar to the one in 'report', from
Feng Tang.
Infrastructure enhancements and fixes:
- Convert the trace builtins to use the growing evsel/evlist
tracepoint infrastructure, removing several open coded constructs
like switch like series of strcmp to dispatch events, etc.
Basically what had already been showcased in 'perf sched'.
- Add evsel constructor for tracepoints, that uses libtraceevent just
to parse the /format events file, use it in a new 'perf test' to
make sure the libtraceevent format parsing regressions can be more
readily caught.
- Some strange errors were happening in some builds, but not on the
next, reported by several people, problem was some parser related
files, generated during the build, didn't had proper make deps, fix
from Eric Sandeen.
- Introduce struct and cache information about the environment where
a perf.data file was captured, from Namhyung Kim.
- Fix handling of unresolved samples when --symbols is used in
'report', from Feng Tang.
- Add union member access support to 'probe', from Hyeoncheol Lee.
- Fixups to die() removal, from Namhyung Kim.
- Render fixes for the TUI, from Namhyung Kim.
- Don't enable annotation in non symbolic view, from Namhyung Kim.
- Fix pipe mode in 'report', from Namhyung Kim.
- Move related stats code from stat to util/, will be used by the
'stat' kvm tool, from Xiao Guangrong.
- Remove die()/exit() calls from several tools.
- Resolve vdso callchains, from Jiri Olsa
- Don't pass const char pointers to basename, so that we can
unconditionally use libgen.h and thus avoid ifdef BIONIC lines,
from David Ahern
- Refactor hist formatting so that it can be reused with the GTK
browser, From Namhyung Kim
- Fix build for another rbtree.c change, from Adrian Hunter.
- Make 'perf diff' command work with evsel hists, from Jiri Olsa.
- Use the only field_sep var that is set up: symbol_conf.field_sep,
fix from Jiri Olsa.
- .gitignore compiled python binaries, from Namhyung Kim.
- Get rid of die() in more libtraceevent places, from Namhyung Kim.
- Rename libtraceevent 'private' struct member to 'priv' so that it
works in C++, from Steven Rostedt
- Remove lots of exit()/die() calls from tools so that the main perf
exit routine can take place, from David Ahern
- Fix x86 build on x86-64, from David Ahern.
- {int,str,rb}list fixes from Suzuki K Poulose
- perf.data header fixes from Namhyung Kim
- Allow user to indicate objdump path, needed in cross environments,
from Maciek Borzecki
- Fix hardware cache event name generation, fix from Jiri Olsa
- Add round trip test for sw, hw and cache event names, catching the
problem Jiri fixed, after Jiri's patch, the test passes
successfully.
- Clean target should do clean for lib/traceevent too, fix from David
Ahern
- Check the right variable for allocation failure, fix from Namhyung
Kim
- Set up evsel->tp_format regardless of evsel->name being set
already, fix from Namhyung Kim
- Oprofile fixes from Robert Richter.
- Remove perf_event_attr needless version inflation, from Jiri Olsa
- Introduce libtraceevent strerror like error reporting facility,
from Namhyung Kim
- Add pmu mappings to perf.data header and use event names from cmd
line, from Robert Richter
- Fix include order for bison/flex-generated C files, from Ben
Hutchings
- Build fixes and documentation corrections from David Ahern
- Assorted cleanups from Robert Richter
- Let O= makes handle relative paths, from Steven Rostedt
- perf script python fixes, from Feng Tang.
- Initial bash completion support, from Frederic Weisbecker
- Allow building without libelf, from Namhyung Kim.
- Support DWARF CFI based unwind to have callchains when %bp based
unwinding is not possible, from Jiri Olsa.
- Symbol resolution fixes, while fixing support PPC64 files with an
.opt ELF section was the end goal, several fixes for code that
handles all architectures and cleanups are included, from Cody
Schafer.
- Assorted fixes for Documentation and build in 32 bit, from Robert
Richter
- Cache the libtraceevent event_format associated to each evsel
early, so that we avoid relookups, i.e. calling pevent_find_event
repeatedly when processing tracepoint events.
[ This is to reduce the surface contact with libtraceevents and
make clear what is that the perf tools needs from that lib: so
far parsing the common and per event fields. ]
- Don't stop the build if the audit libraries are not installed, fix
from Namhyung Kim.
- Fix bfd.h/libbfd detection with recent binutils, from Markus
Trippelsdorf.
- Improve warning message when libunwind devel packages not present,
from Jiri Olsa"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (282 commits)
perf trace: Add aliases for some syscalls
perf probe: Print an enum type variable in "enum variable-name" format when showing accessible variables
perf tools: Check libaudit availability for perf-trace builtin
perf hists: Add missing period_* fields when collapsing a hist entry
perf trace: New tool
perf evsel: Export the event_format constructor
perf evsel: Introduce rawptr() method
perf tools: Use perf_evsel__newtp in the event parser
perf evsel: The tracepoint constructor should store sys:name
perf evlist: Introduce set_filter() method
perf evlist: Renane set_filters method to apply_filters
perf test: Add test to check we correctly parse and match syscall open parms
perf evsel: Handle endianity in intval method
perf evsel: Know if byte swap is needed
perf tools: Allow handling a NULL cpu_map as meaning "all cpus"
perf evsel: Improve tracepoint constructor setup
tools lib traceevent: Fix error path on pevent_parse_event
perf test: Fix build failure
trace: Move trace event enable from fs_initcall to core_initcall
tracing: Add an option for disabling markers
...
As TLB shootdown requests to other CPU cores are now using function call
interrupts, TLB shootdowns entry in /proc/interrupts is always shown as 0.
This behavior change was introduced by commit 52aec3308d ("x86/tlb:
replace INVALIDATE_TLB_VECTOR by CALL_FUNCTION_VECTOR").
This patch reverts TLB shootdowns entry in /proc/interrupts to count TLB
shootdowns separately from the other function call interrupts.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com>
Link: http://lkml.kernel.org/r/20120926021128.22212.20440.stgit@hpxw
Acked-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The ACPI spec doesn't provide for a way for the bios to pass down
recommended thresholds to the OS on a _per-bank_ basis. This patch adds
a new boot option, which if passed, tells Linux to use CMCI thresholds
set by the bios.
As fail-safe, we initialize threshold to 1 if some banks have not been
initialized by the bios and warn the user.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
do_notify_resume() may be called on irq or exception
exit. But at that time the exception has already called
rcu_user_enter() and the irq has already called rcu_irq_exit().
Since it can use RCU read side critical section, we must call
rcu_user_exit() before doing anything there. Then we must call
back rcu_user_enter() after this function because we know we are
going to userspace from there.
This complete support for userspace RCU extended quiescent state
in x86-64.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This way we can exit the RCU extended quiescent state before
we schedule a new task from irq/exception exit.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Add necessary hooks to x86 exception for userspace
RCU extended quiescent state support.
This includes traps, page fault, debug exceptions, etc...
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There is some unnatural label based layout in this function.
Convert the unnecessary goto to readable conditional blocks.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Add syscall slow path hooks to notify syscall entry
and exit on CPUs that want to support userspace RCU
extended quiescent state.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Cleanup the label maze in this function. Having a
seperate function to first handle the traps that don't
generate a signal makes it easier to convert into
more readable conditional paths.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1348577479-2564-1-git-send-email-fweisbec@gmail.com
[ Fixed 32-bit build failure. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
GAS in binutils(2.16.91) could not parse parentheses within
macro parameters unless fully parenthesized, and this is a
workaround to make old gas work without generating below errors:
arch/x86/kernel/entry_64.S: Assembler messages:
arch/x86/kernel/entry_64.S:387: Error: too many positional arguments
arch/x86/kernel/entry_64.S:389: Error: too many positional arguments
[...]
Signed-off-by: Tao Guo <glorioustao@gmail.com>
Reluctantly-Acked-by: Jan Beulich <jbeulich@novell.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1348648102-12653-1-git-send-email-glorioustao@gmail.com
[ Jan argues that these old GAS versions are fragile - which is so, but lets give them a chance. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 31d2092eb0 ("x86: move
mp_register_lapic_address to boot.c") renamed mp_register_lapic
to acpi_register_lapic. But mp_register_lapic remains in a
comment. So the patch rename it.
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/50625239.3050403@jp.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If arch/x86/kernel/cpuid.c is a module, a CPU might offline or online
between the for_each_online_cpu() loop and the call to
register_hotcpu_notifier in cpuid_init or the call to
unregister_hotcpu_notifier in cpuid_exit. The potential races can
lead to leaks/duplicates, attempts to destroy non-existant devices, or
random pointer dereferences.
For example, in cpuid_exit if:
for_each_online_cpu(cpu)
cpuid_device_destroy(cpu);
class_destroy(cpuid_class);
__unregister_chrdev(CPUID_MAJOR, 0, NR_CPUS, "cpu/cpuid");
<----- CPU onlines
unregister_hotcpu_notifier(&cpuid_class_cpu_notifier);
the hotcpu notifier will attempt to create a device for the
cpuid_class, which the module already destroyed.
This fix surrounds for_each_online_cpu and register_hotcpu_notifier or
unregister_hotcpu_notifier with get_online_cpus+put_online_cpus.
Tested on a VM.
Signed-off-by: Silas Boyd-Wickizer <sbw@mit.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If arch/x86/kernel/msr.c is a module, a CPU might offline or online
between the for_each_online_cpu(i) loop and the call to
register_hotcpu_notifier in msr_init or the call to
unregister_hotcpu_notifier in msr_exit. The potential races can lead
to leaks/duplicates, attempts to destroy non-existant devices, or
random pointer dereferences.
For example, in msr_init if:
for_each_online_cpu(i) {
err = msr_device_create(i);
if (err != 0)
goto out_class;
}
<----- CPU offlines
register_hotcpu_notifier(&msr_class_cpu_notifier);
and the CPU never onlines before msr_exit, then the module will never
call msr_device_destroy for the associated CPU.
This fix surrounds for_each_online_cpu and register_hotcpu_notifier or
unregister_hotcpu_notifier with get_online_cpus+put_online_cpus.
Tested on a VM.
Signed-off-by: Silas Boyd-Wickizer <sbw@mit.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Preemption is disabled between kernel_fpu_begin/end() and as such
it is not a good idea to use these routines in kvm_load/put_guest_fpu()
which can be very far apart.
kvm_load/put_guest_fpu() routines are already called with
preemption disabled and KVM already uses the preempt notifier to save
the guest fpu state using kvm_put_guest_fpu().
So introduce __kernel_fpu_begin/end() routines which don't touch
preemption and use them instead of kernel_fpu_begin/end()
for KVM's use model of saving/restoring guest FPU state.
Also with this change (and with eagerFPU model), fix the host cr0.TS vm-exit
state in the case of VMX. For eagerFPU case, host cr0.TS is always clear.
So no need to worry about it. For the traditional lazyFPU restore case,
change the cr0.TS bit for the host state during vm-exit to be always clear
and cr0.TS bit is set in the __vmx_load_host_state() when the FPU
(guest FPU or the host task's FPU) state is not active. This ensures
that the host/guest FPU state is properly saved, restored
during context-switch and with interrupts (using irq_fpu_usable()) not
stomping on the active FPU state.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1348164109.26695.338.camel@sbsiddha-desk.sc.intel.com
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
I get this warning:
arch/x86/kernel/kprobes.c:544:23: warning: ‘skip_singlestep’ declared ‘static’ but never defined
on tip/auto-latest.
Put the skip_singlestep function declaration up, in
KPROBES_CAN_USE_FTRACE and drop the superfluous forward
declaration.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1348145034-16603-1-git-send-email-bp@amd64.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch updates the existing Intel IvyBridge (model 58)
support with proper PEBS event constraints. It cannot reuse
the same as SandyBridge because some events (0xd3) are
specific to IvyBridge.
Also there is no UOPS_DISPATCHED.THREAD on IVB, so do not
populate the PERF_COUNT_HW_STALLED_CYCLES_BACKEND mapping.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: ak@linux.intel.com
Link: http://lkml.kernel.org/r/20120910230701.GA5898@quad
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When acting on a user bug report, we find ourselves constantly
asking for /proc/cpuinfo in order to know the exact family,
model, stepping of the CPU in question.
Instead of having to ask this, add this to dmesg so that it is
visible and no ambiguities can ensue from looking at the
official name string of the CPU coming from CPUID and trying
to map it to f/m/s.
Output then looks like this:
[ 0.146041] smpboot: CPU0: AMD FX(tm)-8100 Eight-Core Processor (fam: 15, model: 01, stepping: 02)
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Link: http://lkml.kernel.org/r/1347640666-13638-1-git-send-email-bp@amd64.org
[ tweaked it minimally to add commas. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The test should be >= ARRAY_SIZE() instead of > ARRAY_SIZE().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20120905123126.GC6128@elgon.mountain
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add the "eagerfpu=auto" (that selects the default scheme in
enabling eagerfpu) which can override compiled-in boot parameters
like "eagerfpu=on/off" (that force enable/disable eagerfpu).
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1347300665-6209-5-git-send-email-suresh.b.siddha@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
xsaveopt/xrstor support optimized state save/restore by tracking the
INIT state and MODIFIED state during context-switch.
Enable eagerfpu by default for processors supporting xsaveopt.
Can be disabled by passing "eagerfpu=off" boot parameter.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1347300665-6209-3-git-send-email-suresh.b.siddha@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Decouple non-lazy/eager fpu restore policy from the existence of the xsave
feature. Introduce a synthetic CPUID flag to represent the eagerfpu
policy. "eagerfpu=on" boot paramter will enable the policy.
Requested-by: H. Peter Anvin <hpa@zytor.com>
Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1347300665-6209-2-git-send-email-suresh.b.siddha@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Fundamental model of the current Linux kernel is to lazily init and
restore FPU instead of restoring the task state during context switch.
This changes that fundamental lazy model to the non-lazy model for
the processors supporting xsave feature.
Reasons driving this model change are:
i. Newer processors support optimized state save/restore using xsaveopt and
xrstor by tracking the INIT state and MODIFIED state during context-switch.
This is faster than modifying the cr0.TS bit which has serializing semantics.
ii. Newer glibc versions use SSE for some of the optimized copy/clear routines.
With certain workloads (like boot, kernel-compilation etc), application
completes its work with in the first 5 task switches, thus taking upto 5 #DNA
traps with the kernel not getting a chance to apply the above mentioned
pre-load heuristic.
iii. Some xstate features (like AMD's LWP feature) don't honor the cr0.TS bit
and thus will not work correctly in the presence of lazy restore. Non-lazy
state restore is needed for enabling such features.
Some data on a two socket SNB system:
* Saved 20K DNA exceptions during boot on a two socket SNB system.
* Saved 50K DNA exceptions during kernel-compilation workload.
* Improved throughput of the AVX based checksumming function inside the
kernel by ~15% as xsave/xrstor is faster than the serializing clts/stts
pair.
Also now kernel_fpu_begin/end() relies on the patched
alternative instructions. So move check_fpu() which uses the
kernel_fpu_begin/end() after alternative_instructions().
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1345842782-24175-7-git-send-email-suresh.b.siddha@intel.com
Merge 32-bit boot fix from,
Link: http://lkml.kernel.org/r/1347300665-6209-4-git-send-email-suresh.b.siddha@intel.com
Cc: Jim Kukunas <james.t.kukunas@linux.intel.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Few lines below we do drop_fpu() which is more safer. Remove the
unnecessary user_fpu_end() in save_xstate_sig(), which allows
the drop_fpu() to ignore any pending exceptions from the user-space
and drop the current fpu.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1345842782-24175-3-git-send-email-suresh.b.siddha@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
No need to save the state with unlazy_fpu(), that is about to get overwritten
by the state from the signal frame. Instead use drop_fpu() and continue
to restore the new state.
Also fold the stop_fpu_preload() into drop_fpu().
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1345842782-24175-2-git-send-email-suresh.b.siddha@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Currently for x86 and x86_32 binaries, fpstate in the user sigframe is copied
to/from the fpstate in the task struct.
And in the case of signal delivery for x86_64 binaries, if the fpstate is live
in the CPU registers, then the live state is copied directly to the user
sigframe. Otherwise fpstate in the task struct is copied to the user sigframe.
During restore, fpstate in the user sigframe is restored directly to the live
CPU registers.
Historically, different code paths led to different bugs. For example,
x86_64 code path was not preemption safe till recently. Also there is lot
of code duplication for support of new features like xsave etc.
Unify signal handling code paths for x86 and x86_64 kernels.
New strategy is as follows:
Signal delivery: Both for 32/64-bit frames, align the core math frame area to
64bytes as needed by xsave (this where the main fpu/extended state gets copied
to and excludes the legacy compatibility fsave header for the 32-bit [f]xsave
frames). If the state is live, copy the register state directly to the user
frame. If not live, copy the state in the thread struct to the user frame. And
for 32-bit [f]xsave frames, construct the fsave header separately before
the actual [f]xsave area.
Signal return: As the 32-bit frames with [f]xstate has an additional
'fsave' header, copy everything back from the user sigframe to the
fpstate in the task structure and reconstruct the fxstate from the 'fsave'
header (Also user passed pointers may not be correctly aligned for
any attempt to directly restore any partial state). At the next fpstate usage,
everything will be restored to the live CPU registers.
For all the 64-bit frames and the 32-bit fsave frame, restore the state from
the user sigframe directly to the live CPU registers. 64-bit signals always
restored the math frame directly, so we can expect the math frame pointer
to be correctly aligned. For 32-bit fsave frames, there are no alignment
requirements, so we can restore the state directly.
"lat_sig catch" microbenchmark numbers (for x86, x86_64, x86_32 binaries) are
with in the noise range with this change.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1343171129-2747-4-git-send-email-suresh.b.siddha@intel.com
[ Merged in compilation fix ]
Link: http://lkml.kernel.org/r/1344544736.8326.17.camel@sbsiddha-desk.sc.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This patch adds a cpumask file to the uncore pmu sysfs directory. The
cpumask file contains one active cpu for every socket.
Signed-off-by: "Yan, Zheng" <zheng.z.yan@intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: "Yan, Zheng" <zheng.z.yan@intel.com>
Link: http://lkml.kernel.org/r/1347263631-23175-2-git-send-email-zheng.z.yan@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
arch_uprobe_disable_step() should also take UTASK_SSTEP_TRAPPED into
account. In this case the probed insn was not executed, we need to
clear X86_EFLAGS_TF if it was set by us and that is all.
Again, this code will look more clean when we move it into
arch_uprobe_post_xol() and arch_uprobe_abort_xol().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
arch_uprobe_disable_step() correctly preserves X86_EFLAGS_TF and
returns to user-mode. But this means the application gets SIGTRAP
only after the next insn.
This means that UPROBE_CLEAR_TF logic is not really right. _enable
should only record the state of X86_EFLAGS_TF, and _disable should
check it separately from UPROBE_FIX_SETF.
Remove arch_uprobe_task->restore_flags, add ->saved_tf instead, and
change enable/disable accordingly. This assumes that the probed insn
was not trapped, see the next patch.
arch_uprobe_skip_sstep() logic has the same problem, change it to
check X86_EFLAGS_TF and send SIGTRAP as well. We will cleanup this
all after we fold enable/disable_step into pre/post_hol hooks.
Note: send_sig(SIGTRAP) is not actually right, we need send_sigtrap().
But this needs more changes, handle_swbp() does the same and this is
equally wrong.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
user_enable/disable_single_step() was designed for ptrace, it assumes
a single user and does unnecessary and wrong things for uprobes. For
example:
- arch_uprobe_enable_step() can't trust TIF_SINGLESTEP, an
application itself can set X86_EFLAGS_TF which must be
preserved after arch_uprobe_disable_step().
- we do not want to set TIF_SINGLESTEP/TIF_FORCED_TF in
arch_uprobe_enable_step(), this only makes sense for ptrace.
- otoh we leak TIF_SINGLESTEP if arch_uprobe_disable_step()
doesn't do user_disable_single_step(), the application will
be killed after the next syscall.
- arch_uprobe_enable_step() does access_process_vm() we do
not need/want.
Change arch_uprobe_enable/disable_step() to set/clear X86_EFLAGS_TF
directly, this is much simpler and more correct. However, we need to
clear TIF_BLOCKSTEP/DEBUGCTLMSR_BTF before executing the probed insn,
add set_task_blockstep(false).
Note: with or without this patch, there is another (hopefully minor)
problem. A probed "pushf" insn can see the wrong X86_EFLAGS_TF set by
uprobes. Perhaps we should change _disable to update the stack, or
teach arch_uprobe_skip_sstep() to emulate this insn.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Afaics the usage of update_debugctlmsr() and TIF_BLOCKSTEP in
step.c was always very wrong.
1. update_debugctlmsr() was simply unneeded. The child sleeps
TASK_TRACED, __switch_to_xtra(next_p => child) should notice
TIF_BLOCKSTEP and set/clear DEBUGCTLMSR_BTF after resume if
needed.
2. It is wrong. The state of DEBUGCTLMSR_BTF bit in CPU register
should always match the state of current's TIF_BLOCKSTEP bit.
3. Even get_debugctlmsr() + update_debugctlmsr() itself does not
look right. Irq can change other bits in MSR_IA32_DEBUGCTLMSR
register or the caller can be preempted in between.
4. It is not safe to play with TIF_BLOCKSTEP if task != current.
DEBUGCTLMSR_BTF and TIF_BLOCKSTEP should always match each
other if the task is running. The tracee is stopped but it
can be SIGKILL'ed right before set/clear_tsk_thread_flag().
However, now that uprobes uses user_enable_single_step(current)
we can't simply remove update_debugctlmsr(). So this patch adds
the additional "task == current" check and disables irqs to avoid
the race with interrupts/preemption.
Unfortunately this patch doesn't solve the last problem, we need
another fix. Probably we should teach ptrace_stop() to set/clear
single/block stepping after resume.
And afaics there is yet another problem: perf can play with
MSR_IA32_DEBUGCTLMSR from nmi, this obviously means that even
__switch_to_xtra() has problems.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
No functional changes, preparation for the next fix and for uprobes
single-step fixes.
Move the code playing with TIF_BLOCKSTEP/DEBUGCTLMSR_BTF into the
new helper, set_task_blockstep().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
The arch specific implementation behaves like user_enable_single_step()
except that it does not disable single stepping if it was already
enabled by ptrace. This allows the debugger to single step over an
uprobe. The state of block stepping is not restored. It makes only sense
together with TF and if that was enabled then the debugger is notified.
Note: this is still not correct. For example, TIF_SINGLESTEP check
is not right, the application itself can set X86_EFLAGS_TF. And otoh
we leak TIF_SINGLESTEP (set by enable) if the probed insn is "popf".
See the next patches, we need the changes in arch/x86/kernel/step.c
first.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
