Two of the three callers want them, so return the more usual format,
and shift into the FFS_ form only for the fixed file table.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230620113235.920399-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The SCM inflight mechanism has nothing to do with the fact that a file
might be a regular file or not and if it supports non-blocking
operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230620113235.920399-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that this only checks O_NONBLOCK and FMODE_NOWAIT, the helper is
complete overkilļ, and the comments are confusing bordering to wrong.
Just inline the check into the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230620113235.920399-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
WHen the ring exits, cleanup is done and the final cancelation and
waiting on completions is done by io_ring_exit_work. That function is
invoked by kworker, which doesn't take any signals. Because of that, it
doesn't really matter if we wait for completions in TASK_INTERRUPTIBLE
or TASK_UNINTERRUPTIBLE state. However, it does matter to the hung task
detection checker!
Normally we expect cancelations and completions to happen rather
quickly. Some test cases, however, will exit the ring and park the
owning task stopped (eg via SIGSTOP). If the owning task needs to run
task_work to complete requests, then io_ring_exit_work won't make any
progress until the task is runnable again. Hence io_ring_exit_work can
trigger the hung task detection, which is particularly problematic if
panic-on-hung-task is enabled.
As the ring exit doesn't take signals to begin with, have it wait
interruptibly rather than uninterruptibly. io_uring has a separate
stuck-exit warning that triggers independently anyway, so we're not
really missing anything by making this switch.
Cc: stable@vger.kernel.org # 5.10+
Link: https://lore.kernel.org/r/b0e4aaef-7088-56ce-244c-976edeac0e66@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Everybody is passing in the request, so get rid of the io_ring_ctx and
explicit user_data pass-in. Both the ctx and user_data can be deduced
from the request at hand.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We use task_work for a variety of reasons, but doing completions or
triggering rety after poll are by far the hottest two. Use the indirect
funtion call wrappers to avoid the indirect function call if
CONFIG_RETPOLINE is set.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We use lockless lists for the local and deferred task_work, which means
that when we queue up events for processing, we ultimately process them
in reverse order to how they were received. This usually doesn't matter,
but for some cases, it does seem to make a big difference. Do the right
thing and reverse the list before processing it, so that we know it's
processed in the same order in which it was received.
This makes a rather big difference for some medium load network tests,
where consistency of performance was a bit all over the place. Here's
a case that has 4 connections each doing two sends and receives:
io_uring port=10002: rps:161.13k Bps: 1.45M idle=256ms
io_uring port=10002: rps:107.27k Bps: 0.97M idle=413ms
io_uring port=10002: rps:136.98k Bps: 1.23M idle=321ms
io_uring port=10002: rps:155.58k Bps: 1.40M idle=268ms
and after the change:
io_uring port=10002: rps:205.48k Bps: 1.85M idle=140ms user=40ms
io_uring port=10002: rps:203.57k Bps: 1.83M idle=139ms user=20ms
io_uring port=10002: rps:218.79k Bps: 1.97M idle=106ms user=30ms
io_uring port=10002: rps:217.88k Bps: 1.96M idle=110ms user=20ms
io_uring port=10002: rps:222.31k Bps: 2.00M idle=101ms user=0ms
io_uring port=10002: rps:218.74k Bps: 1.97M idle=102ms user=20ms
io_uring port=10002: rps:208.43k Bps: 1.88M idle=125ms user=40ms
using more of the time to actually process work rather than sitting
idle.
No effects have been observed at the peak end of the spectrum, where
performance is still the same even with deep batch depths (and hence
more items to sort).
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With IORING_REGISTER_USE_REGISTERED_RING, an application can register
the ring fd and use it via registered index rather than installed fd.
This allows using a registered ring for everything *except* the initial
mmap.
With IORING_SETUP_NO_MMAP, io_uring_setup uses buffers allocated by the
user, rather than requiring a subsequent mmap.
The combination of the two allows a user to operate *entirely* via a
registered ring fd, making it unnecessary to ever install the fd in the
first place. So, add a flag IORING_SETUP_REGISTERED_FD_ONLY to make
io_uring_setup register the fd and return a registered index, without
installing the fd.
This allows an application to avoid touching the fd table at all, and
allows a library to never even momentarily install a file descriptor.
This splits out an io_ring_add_registered_file helper from
io_ring_add_registered_fd, for use by io_uring_setup.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Link: https://lore.kernel.org/r/bc8f431bada371c183b95a83399628b605e978a3.1682699803.git.josh@joshtriplett.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently io_uring applications must call mmap(2) twice to map the rings
themselves, and the sqes array. This works fine, but it does not support
using huge pages to back the rings/sqes.
Provide a way for the application to pass in pre-allocated memory for
the rings/sqes, which can then suitably be allocated from shmfs or
via mmap to get huge page support.
Particularly for larger rings, this reduces the TLBs needed.
If an application wishes to take advantage of that, it must pre-allocate
the memory needed for the sq/cq ring, and the sqes. The former must
be passed in via the io_uring_params->cq_off.user_data field, while the
latter is passed in via the io_uring_params->sq_off.user_data field. Then
it must set IORING_SETUP_NO_MMAP in the io_uring_params->flags field,
and io_uring will then map the existing memory into the kernel for shared
use. The application must not call mmap(2) to map rings as it otherwise
would have, that will now fail with -EINVAL if this setup flag was used.
The pages used for the rings and sqes must be contigious. The intent here
is clearly that huge pages should be used, otherwise the normal setup
procedure works fine as-is. The application may use one huge page for
both the rings and sqes.
Outside of those initialization changes, everything works like it did
before.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We do rings and sqes separately, move them into a helper that does both
the freeing and clearing of the memory.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for having more than one time of ring allocator, make the
existing one return valid/error-pointer rather than just NULL.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We only have two reserved members we're not clearing, do so manually
instead. This is in preparation for using one of these members for
a new feature.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that we have both sockets and block devices setting FMODE_NOWAIT
appropriately, we can get rid of all the odd special casing in
__io_file_supports_nowait() and rely soley on FMODE_NOWAIT and
O_NONBLOCK rather than special case sockets and (in particular) bdevs.
Link: https://lore.kernel.org/r/20230509151910.183637-4-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=Erfk
-----END PGP SIGNATURE-----
Merge tag 'for-6.4/io_uring-2023-04-21' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
- Cleanup of the io-wq per-node mapping, notably getting rid of it so
we just have a single io_wq entry per ring (Breno)
- Followup to the above, move accounting to io_wq as well and
completely drop struct io_wqe (Gabriel)
- Enable KASAN for the internal io_uring caches (Breno)
- Add support for multishot timeouts. Some applications use timeouts to
wake someone waiting on completion entries, and this makes it a bit
easier to just have a recurring timer rather than needing to rearm it
every time (David)
- Support archs that have shared cache coloring between userspace and
the kernel, and hence have strict address requirements for mmap'ing
the ring into userspace. This should only be parisc/hppa. (Helge, me)
- XFS has supported O_DIRECT writes without needing to lock the inode
exclusively for a long time, and ext4 now supports it as well. This
is true for the common cases of not extending the file size. Flag the
fs as having that feature, and utilize that to avoid serializing
those writes in io_uring (me)
- Enable completion batching for uring commands (me)
- Revert patch adding io_uring restriction to what can be GUP mapped or
not. This does not belong in io_uring, as io_uring isn't really
special in this regard. Since this is also getting in the way of
cleanups and improvements to the GUP code, get rid of if (me)
- A few series greatly reducing the complexity of registered resources,
like buffers or files. Not only does this clean up the code a lot,
the simplified code is also a LOT more efficient (Pavel)
- Series optimizing how we wait for events and run task_work related to
it (Pavel)
- Fixes for file/buffer unregistration with DEFER_TASKRUN (Pavel)
- Misc cleanups and improvements (Pavel, me)
* tag 'for-6.4/io_uring-2023-04-21' of git://git.kernel.dk/linux: (71 commits)
Revert "io_uring/rsrc: disallow multi-source reg buffers"
io_uring: add support for multishot timeouts
io_uring/rsrc: disassociate nodes and rsrc_data
io_uring/rsrc: devirtualise rsrc put callbacks
io_uring/rsrc: pass node to io_rsrc_put_work()
io_uring/rsrc: inline io_rsrc_put_work()
io_uring/rsrc: add empty flag in rsrc_node
io_uring/rsrc: merge nodes and io_rsrc_put
io_uring/rsrc: infer node from ctx on io_queue_rsrc_removal
io_uring/rsrc: remove unused io_rsrc_node::llist
io_uring/rsrc: refactor io_queue_rsrc_removal
io_uring/rsrc: simplify single file node switching
io_uring/rsrc: clean up __io_sqe_buffers_update()
io_uring/rsrc: inline switch_start fast path
io_uring/rsrc: remove rsrc_data refs
io_uring/rsrc: fix DEFER_TASKRUN rsrc quiesce
io_uring/rsrc: use wq for quiescing
io_uring/rsrc: refactor io_rsrc_ref_quiesce
io_uring/rsrc: remove io_rsrc_node::done
io_uring/rsrc: use nospec'ed indexes
...
Replace completions with waitqueues for rsrc data quiesce, the main
wakeup condition is when data refs hit zero. Note that data refs are
only changes under ->uring_lock, so we prepare before mutex_unlock()
reacquire it after taking the lock back. This change will be needed
in the next patch.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1d0dbc74b3b4fd67c8f01819e680c5e0da252956.1681395792.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
So far io_req_complete_post() only covers DEFER_TASKRUN by completing
request via task work when the request is completed from IOWQ.
However, uring command could be completed from any context, and if io
uring is setup with DEFER_TASKRUN, the command is required to be
completed from current context, otherwise wait on IORING_ENTER_GETEVENTS
can't be wakeup, and may hang forever.
The issue can be observed on removing ublk device, but turns out it is
one generic issue for uring command & DEFER_TASKRUN, so solve it in
io_uring core code.
Fixes: e6aeb2721d ("io_uring: complete all requests in task context")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-block/b3fc9991-4c53-9218-a8cc-5b4dd3952108@kernel.dk/
Reported-by: Jens Axboe <axboe@kernel.dk>
Cc: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We use io_rsrc_node_switch() coupled with io_rsrc_node_switch_start()
for a bunch of cases including initialising ctx->rsrc_node, i.e. by
passing NULL instead of rsrc_data. Leave it to only deal with actual
node changing.
For that, first remove it from io_uring_create() and add a function
allocating the first node. Then also remove all calls to
io_rsrc_node_switch() from files/buffers register as we already have a
node installed and it does essentially nothing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d146fe306ff98b1a5a60c997c252534f03d423d7.1681210788.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring/io_uring.c:432 io_prep_async_work() error: we previously
assumed 'req->file' could be null (see line 425).
Even though it's a false positive as there will not be REQ_F_ISREG set
without a file, let's add a simple check to make the kernel test robot
happy. We don't care about performance here, but assumingly it'll be
optimised out by the compiler.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a6cfbe92c74b789c0b4f046f7f98d19b1ca2e5b7.1681210788.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Chains of memory accesses are never good for performance.
The req->task->io_uring->in_cancel in io_req_local_work_add() is there
so that when a task is exiting via io_uring_try_cancel_requests() and
starts waiting for completions, it gets woken up by every new task_work
item queued.
Do a little trick by announcing waiting in io_uring_try_cancel_requests(),
making io_req_local_work_add() wake us up. We also need to check for
deferred tw items after prepare_to_wait(TASK_INTERRUPTIBLE);
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/fb11597e9bbcb365901824f8c5c2cf0d6ee100d0.1680782017.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Every task_work will try to wake the task to be executed, which causes
excessive scheduling and additional overhead. For some tw it's
justified, but others won't do much but post a single CQE.
When a task waits for multiple cqes, every such task_work will wake it
up. Instead, the task may give a hint about how many cqes it waits for,
io_req_local_work_add() will compare against it and skip wake ups
if #cqes + #tw is not enough to satisfy the waiting condition. Task_work
that uses the optimisation should be simple enough and never post more
than one CQE. It's also ignored for non DEFER_TASKRUN rings.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d2b77e99d1e86624d8a69f7037d764b739dcd225.1680782017.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently pin the ctx for io_req_local_work_add() with
percpu_ref_get/put, which implies two rcu_read_lock/unlock pairs and some
extra overhead on top in the fast path. Replace it with a pure rcu read
and let io_ring_exit_work() synchronise against it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/cbdfcb6b232627f30e9e50ef91f13c4f05910247.1680782017.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
struct delayed_work rsrc_put_work was previously used to offload node
freeing because io_rsrc_node_ref_zero() was previously called by RCU in
the IRQ context. Now, as percpu refcounting is gone, we can do it
eagerly at the spot without pushing it to a worker.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/13fb1aac1e8d068ad8fd4a0c6d0d157ab61b90c0.1680576071.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We use ->rsrc_ref_lock spinlock to protect ->rsrc_ref_list in
io_rsrc_node_ref_zero(). Now we removed pcpu refcounting, which means
io_rsrc_node_ref_zero() is not executed from the irq context as an RCU
callback anymore, and we also put it under ->uring_lock.
io_rsrc_node_switch(), which queues up nodes into the list, is also
protected by ->uring_lock, so we can safely get rid of ->rsrc_ref_lock.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6b60af883c263551190b526a55ff2c9d5ae07141.1680576071.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, for nodes we have an atomic counter and some cached
(non-atomic) refs protected by uring_lock. Let's put all ref
manipulations under uring_lock and get rid of the atomic part.
It's free as in all cases we care about we already hold the lock.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/25b142feed7d831008257d90c8b17c0115d4fc15.1680576071.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_free_req() is not often used but nevertheless problematic as there is
no way to know the current context, it may be used from the submission
path or even by an irq handler. Push it to a fresh context using
task_work.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3a92fe80bb068757e51aaa0b105cfbe8f5dfee9e.1680576071.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We already do this manually for the !SQPOLL case, do it in general and
we can also dump the ugly min3() in io_submit_sqes().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It has nothing to do with the SQE at this point, it's a request
submission. While in there, get rid of the 'force_nonblock' argument
which is also dead, as we only pass in true.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For task works we're passing around a bool pointer for whether the
current ring is locked or not, let's wrap it in a structure, that
will make it more opaque preventing abuse and will also help us
to pass more info in the future if needed.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1ecec9483d58696e248d1bfd52cf62b04442df1d.1679931367.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Before cond_resched()'ing in handle_tw_list() we also drop the current
ring context, and so the next loop iteration will need to pick/pin a new
context and do trylock.
The chunk removed by this patch was intended to be an optimisation
covering exactly this case, i.e. retaking the lock after reschedule, but
in reality it's skipped for the first iteration after resched as
described and will keep hammering the lock if it's contended.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1ecec9483d58696e248d1bfd52cf62b04442df1d.1679931367.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for KASAN in the alloc_caches (apoll and netmsg_cache).
Thus, if something touches the unused caches, it will raise a KASAN
warning/exception.
It poisons the object when the object is put to the cache, and unpoisons
it when the object is gotten or freed.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20230223164353.2839177-2-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The ring mapped provided buffer rings rely on the application allocating
the memory for the ring, and then the kernel will map it. This generally
works fine, but runs into issues on some architectures where we need
to be able to ensure that the kernel and application virtual address for
the ring play nicely together. This at least impacts architectures that
set SHM_COLOUR, but potentially also anyone setting SHMLBA.
To use this variant of ring provided buffers, the application need not
allocate any memory for the ring. Instead the kernel will do so, and
the allocation must subsequently call mmap(2) on the ring with the
offset set to:
IORING_OFF_PBUF_RING | (bgid << IORING_OFF_PBUF_SHIFT)
to get a virtual address for the buffer ring. Normally the application
would allocate a suitable piece of memory (and correctly aligned) and
simply pass that in via io_uring_buf_reg.ring_addr and the kernel would
map it.
Outside of the setup differences, the kernel allocate + user mapped
provided buffer ring works exactly the same.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some architectures have memory cache aliasing requirements (e.g. parisc)
if memory is shared between userspace and kernel. This patch fixes the
kernel to return an aliased address when asked by userspace via mmap().
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring hashes writes to a given file/inode so that it can serialize
them. This is useful if the file system needs exclusive access to the
file to perform the write, as otherwise we end up with a ton of io-wq
threads trying to lock the inode at the same time. This can cause
excessive system time.
But if the file system has flagged that it supports parallel O_DIRECT
writes, then there's no need to serialize the writes. Check for that
through FMODE_DIO_PARALLEL_WRITE and don't hash it if we don't need to.
In a basic test of 8 threads writing to a file on XFS on a gen2 Optane,
with each thread writing in 4k chunks, it improves performance from
~1350K IOPS (or ~5290MiB/sec) to ~1410K IOPS (or ~5500MiB/sec).
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When removing provided buffers, io_buffer structs are not being disposed
of, leading to a memory leak. They can't be freed individually, because
they are allocated in page-sized groups. They need to be added to some
free list instead, such as io_buffers_cache. All callers already hold
the lock protecting it, apart from when destroying buffers, so had to
extend the lock there.
Fixes: cc3cec8367 ("io_uring: speedup provided buffer handling")
Signed-off-by: Wojciech Lukowicz <wlukowicz01@gmail.com>
Link: https://lore.kernel.org/r/20230401195039.404909-2-wlukowicz01@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If io_uring.o is built with W=1, it triggers a warning:
io_uring/io_uring.c: In function ‘__io_submit_flush_completions’:
io_uring/io_uring.c:1502:40: warning: variable ‘prev’ set but not used [-Wunused-but-set-variable]
1502 | struct io_wq_work_node *node, *prev;
| ^~~~
which is due to the wq_list_for_each() iterator always keeping a 'prev'
variable. Most users need this to remove an entry from a list, for
example, but __io_submit_flush_completions() never does that.
Add a basic helper that doesn't track prev instead, and use that in
that function.
Reported-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=qWNf
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.3-2023-03-03' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
"Here's a set of fixes/changes that didn't make the first cut, either
because they got queued before I sent the early merge request, or
fixes that came in afterwards. In detail:
- Don't set MSG_NOSIGNAL on recv/recvmsg opcodes, as AF_PACKET will
error out (David)
- Fix for spurious poll wakeups (me)
- Fix for a file leak for buffered reads in certain conditions
(Joseph)
- Don't allow registered buffers of mixed types (Pavel)
- Improve handling of huge pages for registered buffers (Pavel)
- Provided buffer ring size calculation fix (Wojciech)
- Minor cleanups (me)"
* tag 'io_uring-6.3-2023-03-03' of git://git.kernel.dk/linux:
io_uring/poll: don't pass in wake func to io_init_poll_iocb()
io_uring: fix fget leak when fs don't support nowait buffered read
io_uring/poll: allow some retries for poll triggering spuriously
io_uring: remove MSG_NOSIGNAL from recvmsg
io_uring/rsrc: always initialize 'folio' to NULL
io_uring/rsrc: optimise registered huge pages
io_uring/rsrc: optimise single entry advance
io_uring/rsrc: disallow multi-source reg buffers
io_uring: remove unused wq_list_merge
io_uring: fix size calculation when registering buf ring
io_uring/rsrc: fix a comment in io_import_fixed()
io_uring: rename 'in_idle' to 'in_cancel'
io_uring: consolidate the put_ref-and-return section of adding work
Heming reported a BUG when using io_uring doing link-cp on ocfs2. [1]
Do the following steps can reproduce this BUG:
mount -t ocfs2 /dev/vdc /mnt/ocfs2
cp testfile /mnt/ocfs2/
./link-cp /mnt/ocfs2/testfile /mnt/ocfs2/testfile.1
umount /mnt/ocfs2
Then umount will fail, and it outputs:
umount: /mnt/ocfs2: target is busy.
While tracing umount, it blames mnt_get_count() not return as expected.
Do a deep investigation for fget()/fput() on related code flow, I've
finally found that fget() leaks since ocfs2 doesn't support nowait
buffered read.
io_issue_sqe
|-io_assign_file // do fget() first
|-io_read
|-io_iter_do_read
|-ocfs2_file_read_iter // return -EOPNOTSUPP
|-kiocb_done
|-io_rw_done
|-__io_complete_rw_common // set REQ_F_REISSUE
|-io_resubmit_prep
|-io_req_prep_async // override req->file, leak happens
This was introduced by commit a196c78b54 in v5.18. Fix it by don't
re-assign req->file if it has already been assigned.
[1] https://lore.kernel.org/ocfs2-devel/ab580a75-91c8-d68a-3455-40361be1bfa8@linux.alibaba.com/T/#t
Fixes: a196c78b54 ("io_uring: assign non-fixed early for async work")
Cc: <stable@vger.kernel.org>
Reported-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230228045459.13524-1-joseph.qi@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter". These filters provide users
with finer-grained control over DAMOS's actions. SeongJae has also done
some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series "mm:
support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with his
series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings. The previous BPF-based approach had
shortcomings. See "mm: In-kernel support for memory-deny-write-execute
(MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a per-node
basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage during
compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in ths
series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's series
"mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
"fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest of
the kernel in the series "Simplify the external interface for GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the series
"mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
=MlGs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
This better describes what it does - it's incremented when the task is
currently undergoing a cancelation operation, due to exiting or exec'ing.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We've got a few cases of this, move them to one section and just use
gotos to get there. Reduces the text section on both arm64 and x86-64,
using gcc-12.2.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new flag IORING_REGISTER_USE_REGISTERED_RING (set via the high bit
of the opcode) to treat the fd as a registered index rather than a file
descriptor.
This makes it possible for a library to open an io_uring, register the
ring fd, close the ring fd, and subsequently use the ring entirely via
registered index.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Link: https://lore.kernel.org/r/f2396369e638284586b069dbddffb8c992afba95.1676419314.git.josh@joshtriplett.org
[axboe: remove extra high bit clear]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If CONFIG_PREEMPT_NONE is set and the task_work chains are long, we
could be running into issues blocking others for too long. Add a
reschedule check in handle_tw_list(), and flush the ctx if we need to
reschedule.
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper for putting refs from the target task context, rename
__io_put_task() and add a couple of comments around. Use the remote
version for __io_req_complete_post(), the local is only needed for
__io_submit_flush_completions().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3bf92ebd594769d8a5d648472a8e335f2031d542.1674484266.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Return an SQE from io_get_sqe() as a parameter and use the return value
to determine if it failed or not. This enables the compiler to compile out
the sqe NULL check when we know that the return SQE is valid.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9cceb11329240ea097dffef6bf0a675bca14cf42.1674484266.git.asml.silence@gmail.com
[axboe: remove bogus const modifier on return value]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This generates better code for me, avoiding an extra load on arm64, and
both call sites already have this variable available for easy passing.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Every io_uring request is represented by struct io_kiocb, which is
cached locally by io_uring (not SLAB/SLUB) in the list called
submit_state.freelist. This patch simply enabled KASAN for this free
list.
This list is initially created by KMEM_CACHE, but later, managed by
io_uring. This patch basically poisons the objects that are not used
(i.e., they are the free list), and unpoisons it when the object is
allocated/removed from the list.
Touching these poisoned objects while in the freelist will cause a KASAN
warning.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch removes some "cold" fields from `struct io_issue_def`.
The plan is to keep only highly used fields into `struct io_issue_def`, so,
it may be hot in the cache. The hot fields are basically all the bitfields
and the callback functions for .issue and .prep.
The other less frequently used fields are now located in a secondary and
cold struct, called `io_cold_def`.
This is the size for the structs:
Before: io_issue_def = 56 bytes
After: io_issue_def = 24 bytes; io_cold_def = 40 bytes
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20230112144411.2624698-2-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current io_op_def struct is becoming huge and the name is a bit
generic.
The goal of this patch is to rename this struct to `io_issue_def`. This
struct will contain the hot functions associated with the issue code
path.
For now, this patch only renames the structure, and an upcoming patch
will break up the structure in two, moving the non-issue fields to a
secondary struct.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20230112144411.2624698-1-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_submit_flush_completions() may queue new requests for tw execution,
especially true for linked requests. Recheck the tw list for emptiness
after flushing completions.
Note that this doesn't really fix the commit referenced below, but it
does reinstate an optimization that existed before that got merged.
Fixes: f88262e60b ("io_uring: lockless task list")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6328acdbb5e60efc762b18003382de077e6e1367.1673887636.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change the return type to void since it always return 0, and no need
to do the checking in syscall io_uring_enter.
Signed-off-by: Quanfa Fu <quanfafu@gmail.com>
Link: https://lore.kernel.org/r/20230115071519.554282-1-quanfafu@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We needed fake nodes in __io_run_local_work() and to avoid unecessary wake
ups while the task already running task_works, but we don't need them
anymore since wake ups are protected by cq_waiting, which is always
cleared by the time we're executing deferred task_work items.
Note that because of loose sync around cq_waiting clearing
io_req_local_work_add() may wake the task more than once, but that's
fine and should be rare to not hurt perf.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8839534891f0a2f1076e78554a31ea7e099f7de5.1673274244.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With DEFER_TASKRUN only ctx->submitter_task might be waiting for CQEs,
we can use this to optimise io_cqring_wait(). Replace ->cq_wait
waitqueue with waking the task directly.
It works but misses an important optimisation covered by the following
patch, so this patch without follow ups might hurt performance.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/103d174d35d919d4cb0922d8a9c93a8f0c35f74a.1673274244.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Flush completions is done either from the submit syscall or by the
task_work, both are in the context of the submitter task, and when it
goes for a single threaded rings like implied by ->task_complete, there
won't be any waiters on ->cq_wait but the master task. That means that
there can be no tasks sleeping on cq_wait while we run
__io_submit_flush_completions() and so waking up can be skipped.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/60ad9768ec74435a0ddaa6eec0ffa7729474f69f.1673274244.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Even though io_poll_wq_wake()'s waitqueue_active reuses a barrier we do
for another waitqueue, it's not going to be the case in the future and
so we want to have a fast path for it when the ring has never been
polled.
Move poll_wq wake ups into __io_commit_cqring_flush() using a new flag
called ->poll_activated. The idea behind the flag is to set it when the
ring was polled for the first time. This requires additional sync to not
miss events, which is done here by using task_work for ->task_complete
rings, and by default enabling the flag for all other types of rings.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/060785e8e9137a920b232c0c7f575b131af19cac.1673274244.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unlike the jiffy scheduling version, schedule_hrtimeout() jumps a few
functions before getting into schedule() even if there is no actual
timeout needed. Some tests showed that it takes up to 1% of CPU cycles.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/89f880574eceee6f4899783377ead234df7b3d04.1672916894.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_cqring_wait_schedule() is called after we started waiting on the cq
wq and set the state to TASK_INTERRUPTIBLE, for that reason we have to
constantly worry whether we has returned the state back to running or
not. Leave only quick checks in io_cqring_wait_schedule() and move the
rest including running task work to the callers. Note, we run tw in the
loop after the sched checks because of the fast path in the beginning of
the function.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2814fabe75e2e019e7ca43ea07daa94564349805.1672916894.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Most places that want to run local tw explicitly and in advance check if
they are allowed to do so. Don't rely on a similar check in
__io_run_local_work(), leave it as a just-in-case warning and make sure
callers checks capabilities themselves.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/990fe0e8e70fd4d57e43625e5ce8fba584821d1a.1672916894.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Task work runners keep running until all queues tw items are exhausted.
It's also rare for defer tw to queue normal tw and vise versa. Taking it
into account, there is only a dim chance that further iterating the
io_cqring_wait() fast path will get us anything and so we can remove
the loop there.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1f9565726661266abaa5d921e97433c831759ecf.1672916894.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drain requests all go through io_drain_req, which has a quick exit in case
there is nothing pending (ie the drain is not useful). In that case it can
run the issue the request immediately.
However for safety it queues it through task work.
The problem is that in this case the request is run asynchronously, but
the async work has not been prepared through io_req_prep_async.
This has not been a problem up to now, as the task work always would run
before returning to userspace, and so the user would not have a chance to
race with it.
However - with IORING_SETUP_DEFER_TASKRUN - this is no longer the case and
the work might be defered, giving userspace a chance to change data being
referred to in the request.
Instead _always_ prep_async for drain requests, which is simpler anyway
and removes this issue.
Cc: stable@vger.kernel.org
Fixes: c0e0d6ba25 ("io_uring: add IORING_SETUP_DEFER_TASKRUN")
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20230127105911.2420061-1-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IORING_SETUP_R_DISABLED rings don't have the submitter task set, so
it's not always safe to use ->submitter_task. Disallow posting msg_ring
messaged to disabled rings. Also add task NULL check for loosy sync
around testing for IORING_SETUP_R_DISABLED.
Cc: stable@vger.kernel.org
Fixes: 6d043ee116 ("io_uring: do msg_ring in target task via tw")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Patch series "mm/nommu: don't use VM_MAYSHARE for MAP_PRIVATE mappings".
Trying to reduce the confusion around VM_SHARED and VM_MAYSHARE first
requires !CONFIG_MMU to stop using VM_MAYSHARE for MAP_PRIVATE mappings.
CONFIG_MMU only sets VM_MAYSHARE for MAP_SHARED mappings.
This paves the way for further VM_MAYSHARE and VM_SHARED cleanups: for
example, renaming VM_MAYSHARED to VM_MAP_SHARED to make it cleaner what is
actually means.
Let's first get the weird case out of the way and not use VM_MAYSHARE in
MAP_PRIVATE mappings, using a new VM_MAYOVERLAY flag instead.
This patch (of 3):
We want to stop using VM_MAYSHARE in private mappings to pave the way for
clarifying the semantics of VM_MAYSHARE vs. VM_SHARED and reduce the
confusion. While CONFIG_MMU uses VM_MAYSHARE to represent MAP_SHARED,
!CONFIG_MMU also sets VM_MAYSHARE for selected R/O private file mappings
that are an effective overlay of a file mapping.
Let's factor out all relevant VM_MAYSHARE checks in !CONFIG_MMU code into
is_nommu_shared_mapping() first.
Note that whenever VM_SHARED is set, VM_MAYSHARE must be set as well
(unless there is a serious BUG). So there is not need to test for
VM_SHARED manually.
No functional change intended.
Link: https://lkml.kernel.org/r/20230102160856.500584-1-david@redhat.com
Link: https://lkml.kernel.org/r/20230102160856.500584-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jiffy to ktime CQ waiting conversion broke how we treat timeouts, in
particular we rearm it anew every time we get into
io_cqring_wait_schedule() without adjusting the timeout. Waiting for 2
CQEs and getting a task_work in the middle may double the timeout value,
or even worse in some cases task may wait indefinitely.
Cc: stable@vger.kernel.org
Fixes: 228339662b ("io_uring: don't convert to jiffies for waiting on timeouts")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f7bffddd71b08f28a877d44d37ac953ddb01590d.1672915663.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unlike normal tw, nothing prevents deferred tw to be executed right
after an tw item added to ->work_llist in io_req_local_work_add(). For
instance, the waiting task may get waken up by CQ posting or a normal
tw. Thus we need to pin the ring for the rest of io_req_local_work_add()
Cc: stable@vger.kernel.org
Fixes: c0e0d6ba25 ("io_uring: add IORING_SETUP_DEFER_TASKRUN")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1a79362b9c10b8523ef70b061d96523650a23344.1672795998.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
