This release is almost all drivers, there's some small improvements in
the core but otherwise everything is updates to drivers, mostly the
addition of new ones.
There's also a bunch of changes pulled in from the MFD subsystem as
dependencies, Rockchip and TI core MFD code that the regulator drivers
depend on.
I've also yet again managed to put a SPI commit in the regulator tree, I
don't know what it is about those two trees (this for spi-geni-qcom).
- Support for Renesas RAA215300, Rockchip RK808, Texas Instruments
TPS6594 and TPS6287x, and X-Powers AXP15060 and AXP313a
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSZkRUACgkQJNaLcl1U
h9A0bAf+IM6F/vTF7R/2NTlR3M/Z7HGinxK1oit6LuZfKnveaRRCEWvBVoZzZpjs
CzdWTPBWA2jyETzEqmX7gxYnxf2aaLieLEpKRZSh3uQd5OKmrizQDs5/OdaVUViK
/ytmqd/IFgFfwaI+az38CQlTf+dDyuJDB0OwlkEkoaxWjeiAh6INBh6xO9aKczoW
lFd0tOVQt1EcBKdB4tBJLTFIWWsG66xy9NZ018FrcA+bCmQVBvkbqcahayI5Q6Kw
m5H7cZuFbKV51AlyYMF/C4Lwhy1mOT166eRmSrgxBXCsqhpFeHYkJQkmumNd3gkQ
oSQPTZHqSblJA7Utw09mlT6r/xqL0Q==
=/f85
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This release is almost all drivers, there's some small improvements in
the core but otherwise everything is updates to drivers, mostly the
addition of new ones.
There's also a bunch of changes pulled in from the MFD subsystem as
dependencies, Rockchip and TI core MFD code that the regulator drivers
depend on.
I've also yet again managed to put a SPI commit in the regulator tree,
I don't know what it is about those two trees (this for
spi-geni-qcom).
Summary:
- Support for Renesas RAA215300, Rockchip RK808, Texas Instruments
TPS6594 and TPS6287x, and X-Powers AXP15060 and AXP313a"
* tag 'regulator-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (43 commits)
regulator: Add Renesas PMIC RAA215300 driver
regulator: dt-bindings: Add Renesas RAA215300 PMIC bindings
regulator: ltc3676: Use maple tree register cache
regulator: ltc3589: Use maple tree register cache
regulator: helper: Document ramp_delay parameter of regulator_set_ramp_delay_regmap()
regulator: mt6358: Use linear voltage helpers for single range regulators
regulator: mt6358: Const-ify mt6358_regulator_info data structures
regulator: mt6358: Drop *_SSHUB regulators
regulator: mt6358: Merge VCN33_* regulators
regulator: dt-bindings: mt6358: Drop *_sshub regulators
regulator: dt-bindings: mt6358: Merge ldo_vcn33_* regulators
regulator: dt-bindings: pwm-regulator: Add missing type for "pwm-dutycycle-unit"
regulator: Switch two more i2c drivers back to use .probe()
spi: spi-geni-qcom: Do not do DMA map/unmap inside driver, use framework instead
soc: qcom: geni-se: Add interfaces geni_se_tx_init_dma() and geni_se_rx_init_dma()
regulator: tps6594-regulator: Add driver for TI TPS6594 regulators
regulator: axp20x: Add AXP15060 support
regulator: axp20x: Add support for AXP313a variant
dt-bindings: pfuze100.yaml: Add an entry for interrupts
regulator: stm32-pwr: Fix regulator disabling
...
Merge series from Biju Das <biju.das.jz@bp.renesas.com>:
This patch series aims to add support for Renesas PMIC RAA215300 and
built-in RTC found on this PMIC device.
The details of PMIC can be found here[1].
Renesas PMIC RAA215300 exposes two separate i2c devices, one for the main
device and another for rtc device.
A fix for a typoed iterator in the Intel Soundwire driver, fairly simple
on inspection though not reviewed by Intel.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSS9eUACgkQJNaLcl1U
h9AUrgf8DzxOtaTaxzWGlVhoky6KxmYXXLANFOM1iDvGghoxEiYRCjn79El5+MuL
YfmgOzUX1ls1T9eZFzUqhAmavjfYbQw7bK90nuK2iNklxswhFbvwJdb0X854eFza
wLZEXhDnw9uyuCeenhC/JICxz5JvRnscmQ+rMy0SZQhKWeQ5QUdy2oa1o6dEpLd7
uaqZirgaaa2jWikj/6KwO7/sEaE7UznZfwdMbijwwwURXMty1+9Zo5V8+sctYbjI
oMHhiTbgAPbgfKN6k7MntGwWXBM7CXpAuzz6SOwdrOQmKaE5ODAAG1PnAWMkR2DQ
T0rlCos56Xrom2lseAQoX/97OKCJWA==
=dj3R
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.4-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fix for v6.4
A fix for a typoed iterator in the Intel Soundwire driver, fairly simple
on inspection though not reviewed by Intel.
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GV601V series.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230621085715.5382-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG G634Z series.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230619060320.1336455-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The loop checking for multiple different devices on a single sdw link
contains a typo accidentally using i twice instead of j. Correct to the
correct index variable.
Fixes: dc5a3e60a4 ("ASoC: Intel: sof_sdw: append codec type to dai link name")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230614142116.1059677-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A couple more fixes for v6.4, one fixing a misleading error log and
another stopping us seeing spurious failures setting the master volume
on some Tegra systems introduced by a change to how we calculate delay
times.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSK+S0ACgkQJNaLcl1U
h9BoSAf/ddQv2NM7kH1N7Iu1bEWGZMBi9RyfxHoJPfg4lkG4x26NWCoU6r5N5ymR
0nZRnQs9cDsNoGSr9UDQK4DV6Wv4I4oyeg1O2H+4wGIic9t/XLJIKfVJKrox7jzW
cX7gbB6EytGF04ggBmazfNU8CGO2xEAL0gA9ycwceLzIq6ODXapXBVPOuxVjHuns
FKCSzDEh2HzuWAmn4FFGH7vGlQbJm9VPAsMXLFNA+Xpr2JKpjfmY/aSR0seKnjHz
Zp81Z8buZeFmANbVvZ0WuXfNUltwDjgdwulLDb6cq8Drv2qzUr0VH858Q5duwFIr
y2kTbOpZRD2mXLaVyTzUF9yRnKUVEw==
=HPCX
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.4-rc6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.4
A couple more fixes for v6.4, one fixing a misleading error log and
another stopping us seeing spurious failures setting the master volume
on some Tegra systems introduced by a change to how we calculate delay
times.
This commit adds new DEVICE_FLG with QUIRK_FLAG_DSD_RAW and Vendor Id for
HEM devices which supports native DSD. Prior to this change Linux kernel
was not enabling native DSD playback for HEM devices, and as a result,
DSD audio was being converted to PCM "on the fly". HEM devices,
when connected to the system, would only play audio in PCM format,
even if the source material was in DSD format. With the addition of new
VENDOR_FLG in the quircks.c file, the devices are now correctly
recognized, and raw DSD data is transmitted to the device,
allowing for native DSD playback.
Signed-off-by: Lukasz Tyl <ltyl@hem-e.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230614122524.30271-1-ltyl@hem-e.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As reported in the bugzilla below, the PM resume of a UAC3 device may
fail due to the incomplete power state change, stuck at D1. The
reason is that the driver expects the full D0 power state change only
at hw_params, while the normal PCM resume procedure doesn't call
hw_params.
For fixing the bug, we add the same power state update to D0 at the
prepare callback, which is certainly called by the resume procedure.
Note that, with this change, the power state change in the hw_params
becomes almost redundant, since snd_usb_hw_params() doesn't touch the
parameters (at least it tires so). But dropping it is still a bit
risky (e.g. we have the media-driver binding), so I leave the D0 power
state change in snd_usb_hw_params() as is for now.
Fixes: a0a4959eb4 ("ALSA: usb-audio: Operate UAC3 Power Domains in PCM callbacks")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217539
Link: https://lore.kernel.org/r/20230612132818.29486-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 3ed2b549b3 ("ALSA: pcm: fix wait_time calculations") corrected
the PCM wait_time calculations and in doing so reduced the calculated
wait_time. This exposed an issue with the Tegra Master Volume Control
(MVC) device where the reduced wait_time caused the MVC to fail. For now
fix this by setting the default wait_time for Tegra to be 500ms.
Fixes: 3ed2b549b3 ("ALSA: pcm: fix wait_time calculations")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230613093453.13927-1-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>:
A "known issue" during implementation of SE DMA for spi geni driver was
that it does DMA map/unmap internally instead of in spi framework.
Current patches remove this hiccup and also clean up code a bit.
Testing revealed no regressions and results with 1000 iterations of
reading from EC showed no loss of performance.
Results
=======
Before - Iteration 999, min=5.10, max=5.17, avg=5.14, ints=25129
After - Iteration 999, min=5.10, max=5.20, avg=5.15, ints=25153
In the commit 7bb6234095 ("ALSA: hda/realtek: fix speaker, mute/micmute
LEDs not work on a HP platform"), speakers and LEDs are fixed but only 2
CS35L41 amplifiers on SPI bus connected to Realtek codec are enabled. Need
the ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED to get all amplifiers working.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Fixes: 7bb6234095 ("ALSA: hda/realtek: fix speaker, mute/micmute LEDs not work on a HP platform")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230606145747.135966-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A lot of routine driver specific fixes here, nothing in the core though
there are a couple of fixes for the generic cards. There's also a few
new quirks for x86 platforms.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmR/LuwACgkQJNaLcl1U
h9DUZgf/a6hZMe3KVyW86Migg2Gwo4rpuG5KyFHXsOQnOwJCom+UdzGP8C+Hwugt
lLXB9WqQ6rJPpnGFRfbVx7GXHhbxwWrQYUnkoZVXFDAB9xe5IYil7xnQxVl/R7Nr
2SIS0y8X8ckbqy4oGoAUUco4y2jRNF8RBXw4ksZzdALGcZ6/zwayDxC0aPMxtPco
hVJarYa5bRZR3lcxrr9jf5DQP6OFX8gYu3C5e11q6m2OC5B8f22i62vpQ1h44eS2
amHoamFNvVN3sso+ZCE1wWgZa5rYCuNB1Q7q9ZoZFiW/VEeDK2SVsmUso2xDnD3a
8amA62PV2zokmxquyDIn5lwrXuJmMA==
=iAoe
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.4-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.4
A lot of routine driver specific fixes here, nothing in the core though
there are a couple of fixes for the generic cards. There's also a few
new quirks for x86 platforms.
HD-audio core code replaces the kctl->id.index of SPDIF-related
controls after assigning via snd_ctl_add(). This doesn't work any
longer with the new Xarray lookup change. The change of the kctl->id
content has to be done via snd_ctl_rename_id() helper, instead.
Fixes: c27e1efb61 ("ALSA: control: Use xarray for faster lookups")
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606093855.14685-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
GUS driver replaces the kctl->id.index after assigning the kctl via
snd_ctl_add(). This doesn't work any longer with the new Xarray
lookup change. It has to be set before snd_ctl_add() call instead.
Fixes: c27e1efb61 ("ALSA: control: Use xarray for faster lookups")
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606093855.14685-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
cmipci driver replaces the kctl->id.device after assigning the kctl
via snd_ctl_add(). This doesn't work any longer with the new Xarray
lookup change. It has to be set before snd_ctl_add() call instead.
Fixes: c27e1efb61 ("ALSA: control: Use xarray for faster lookups")
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606093855.14685-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ymfpci driver replaces the kctl->id.device after assigning the kctl
via snd_ctl_add(). This doesn't work any longer with the new Xarray
lookup change. It has to be set before snd_ctl_add() call instead.
Fixes: c27e1efb61 ("ALSA: control: Use xarray for faster lookups")
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606093855.14685-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The new xarray lookup code requires to know complete kcontrol->id before
snd_ctl_add() call. Reorder the code to make the initialization properly.
Cc: stable@kernel.org # v5.19+
Reported-by: Martin Zidek <zidek@master.cz>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606073122.597491-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Headset microphone on this platform does not work without
ALC897_FIXUP_HEADSET_MIC_PIN fixup.
Signed-off-by: RenHai <kean0048@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230602003604.975892-1-kean0048@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There's an issue on SAI synchronous mode that TX/RX side can't get BCLK
from RX/TX it sync with if BYP bit is asserted. It's a workaround to
fix it that enable SION of IOMUX pad control and assert BCI.
For example if TX sync with RX which means both TX and RX are using clk
form RX and BYP=1. TX can get BCLK only if the following two conditions
are valid:
1. SION of RX BCLK IOMUX pad is set to 1
2. BCI of TX is set to 1
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230530103012.3448838-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The code in asoc_simple_startup was treating any non-zero return from
snd_pcm_hw_constraint_minmax as an error, when this can return 1 in some
normal cases and only negative values indicate an error.
When this happened, it caused asoc_simple_startup to disable the clocks
it just enabled and return 1, which was not treated as an error by the
calling code which only checks for negative return values. Then when the
PCM is eventually shut down, it causes the clock framework to complain
about disabling clocks that were not enabled.
Fix the check for snd_pcm_hw_constraint_minmax return value to only
treat negative values as an error.
Fixes: 5ca2ab4598 ("ASoC: simple-card-utils: Add new system-clock-fixed flag")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20230602011936.231931-1-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
These patches concern modifications made in mt8186[1]. The clock
unregistration mechanism used in mt8188 and mt8195 is similar with
mt8186, resulting in the same problem existing within the driver.
Therefore, the solution has also been applied to these two platforms.
[1] https://lore.kernel.org/all/20230511092437.1.I31cceffc8c45bb1af16eb613e197b3df92cdc19e@changeid/
The dma pointer must be set to the passed stream pointer, even
if that pointer is NULL.
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230601124907.3128170-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MAX98363 does not support 32bit depth audio.
Removed 32bit from the supported format list.
Instead, added 16bit and 24bit to the list.
Signed-off-by: Ryan Lee <ryans.lee@analog.com>
Link: https://lore.kernel.org/r/20230601130600.25344-1-ryan.lee.analog@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During mt8195_afe_init_clock(), mt8195_audsys_clk_register() was called
followed by several other devm functions. At mt8195_afe_deinit_clock()
located at mt8195_afe_pcm_dev_remove(), mt8195_audsys_clk_unregister()
was called.
However, there was an issue with the order in which these functions were
called. Specifically, the remove callback of platform_driver was called
before devres released the resource, resulting in a use-after-free issue
during remove time.
At probe time, the order of calls was:
1. mt8195_audsys_clk_register
2. afe_priv->clk = devm_kcalloc
3. afe_priv->clk[i] = devm_clk_get
At remove time, the order of calls was:
1. mt8195_audsys_clk_unregister
3. free afe_priv->clk[i]
2. free afe_priv->clk
To resolve the problem, we can utilize devm_add_action_or_reset() in
mt8195_audsys_clk_register() so that the remove order can be changed to
3->2->1.
Fixes: 6746cc8582 ("ASoC: mediatek: mt8195: add platform driver")
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230601033318.10408-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During mt8188_afe_init_clock(), mt8188_audsys_clk_register() was called
followed by several other devm functions. The caller of
mt8188_afe_init_clock() utilized devm_add_action_or_reset() to call
mt8188_afe_deinit_clock(). However, the order was incorrect, causing a
use-after-free issue during remove time.
At probe time, the order of calls was:
1. mt8188_audsys_clk_register
2. afe_priv->clk = devm_kcalloc
3. afe_priv->clk[i] = devm_clk_get
At remove time, the order of calls was:
1. mt8188_audsys_clk_unregister
3. free afe_priv->clk[i]
2. free afe_priv->clk
To resolve the problem, it's necessary to move devm_add_action_or_reset()
to the appropriate position so that the remove order can be 3->2->1.
Fixes: f6b026479b ("ASoC: mediatek: mt8188: support audio clock control")
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230601033318.10408-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Thinkpad Neo14 Ryzen Edition uses Ryzen 6800H processor, and adding to
quirks list for acp6x will enable internal mic.
Signed-off-by: Sicong Jiang <kevin.jiangsc@gmail.com>
Link: https://lore.kernel.org/r/20230531090635.89565-1-kevin.jiangsc@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add entries for Positivo laptops: CW14Q01P, K1424G, N14ZP74G to the
DMI table, so that active-high jack-detect will work properly on
these laptops.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://lore.kernel.org/r/20230529181911.632851-1-edson.drosdeck@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sending the mutex address(acp_lock) as platform
data during ACP PDM platform driver register sequence,
its creating copy of the platform data.
Referencing this platform data in ACP PDM driver results
incorrect reference to the common lock usage.
Instead of directly passing the lock address as platform
data, retrieve it from parent driver data structure
and use the same lock reference in ACP PDM driver.
Fixes: 45aa83cb93 ("ASoC: amd: ps: use acp_lock to protect common registers in pdm driver")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230525113000.1290758-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the error path, a of_node_put() for platform is missing.
Just add it.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20230523151223.109551-9-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Lenovo M70/M90 Gen4 are equipped with ALC897, and they need
ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work.
The previous quirk for M70/M90 is for Gen3.
Signed-off-by: Bin Li <bin.li@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230524113755.1346928-1-bin.li@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
regmap-sdw does not support multi register writes, so there is
no point in setting this flag. This also leads to incorrect
programming of WSA codecs with regmap_multi_reg_write() call.
This invalid configuration should have been rejected by regmap-sdw.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523165414.14560-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
regmap-sdw does not support multi register writes, so there is
no point in setting this flag. This also leads to incorrect
programming of WSA codecs with regmap_multi_reg_write() call.
This invalid configuration should have been rejected by regmap-sdw.
Fixes: a0aab9e140 ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523154605.4284-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
regmap-sdw does not support multi register writes, so there is
no point in setting this flag. This also leads to incorrect
programming of WSA codecs with regmap_multi_reg_write() call.
This invalid configuration should have been rejected by regmap-sdw.
Fixes: 43b8c7dc85 ("ASoC: codecs: add wsa883x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523154605.4284-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of fixes for v6.4, mostly driver specific but there's also
one fix for DPCM to avoid incorrectly repeated calls to prepare() which
can trigger issues on some systems.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRt4skACgkQJNaLcl1U
h9Cl2gf8CnINVsSuzSgRqvpaxSpsEufghFJrlVtNPJxJz6z+1X+sz/bsq3ceuIWl
56kJ9V0FgdcFJn8PtzJWSMvY/iwyMjAVrCl7cPqPlEIRrelQUihEteDQiL+lGrPn
m0zkFWywW+r+KuzgoEosqL6/cDx7iR2NsELm/z/6aobsJRwVii7DigGAym9TNvwf
dKvxy3uSX+XbCR7BTadO4wn4iHZ0/BkgYxUu4KckTgFDqHQHwrnbZNLhr0w214el
bQuQOD0o6n8ZhBabOYv6j+TpwMO9qI/PjqJtn+fOZRi4pSmF1HlHL+8HLbukzblA
FcsQJdXyKNzEbgHKTamOul9hgx4q4w==
=H2J9
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.4-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.4
A collection of fixes for v6.4, mostly driver specific but there's also
one fix for DPCM to avoid incorrectly repeated calls to prepare() which
can trigger issues on some systems.
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmRqh6weHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGXr0H/05UPv+bGw0xIFkj
5sE/uAsEbcQFFm8nsK9/03PUXGpYGNvDS2HO2rfsV0KNJSQDAS1TvXkh3D1S0v6D
ae28lkSl3Nn7YcOQGtdHZp2tSWlP0N0OE6tJlDzM/Q6AcbeoBHlVCg5EJzgd+op6
ScJwUmlwot2jZlYo6UTelr2v0j+C1Hj/t+sqTLY4bqXEybNrJmJDYhRayiqTps+h
+ypOSWdg8paq6UZBoYz0PiomV+E2gXvXtSeVtST9QmpGK9RwvglLB/wkbl+sYNW2
KbAZVrh/Orcm+bKguwf357pwc1Z59aI8/uFgOO8Om5nb4WrE/q7PNyxAHqAzxZDD
UyGwk+g=
=ZihJ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRt4J4ACgkQJNaLcl1U
h9DdwAf9G2RRwBf09X767dqIr41cgEG2NWTVX6/4cnFBZhM2uibVpSXZGOd9D+JX
j+wo9gIXYfLlOA5p2AJyxTy5310UZCqea+k9kZ9pFv1gkQlZrGcsvDERNWsWj7Ub
i2bNQyFE54SEfAPNQYtK/Jr5ZOW6/vn0XKALXjosImm03khTCas7zh+YyEJVftbL
ENS/DCCDwpVi54Eud+gN3CHwBIQus3s8c0nVqXOik4teSP2Bo4PFR3LE2zhZxdM0
w9JWSCDjtiPd2tQ5hQ+FokTeJwEFX1JVWIwvfOUeUabaxB5jrDmfFafi91HUwi+W
ZWkWQ+d1oIEAkuAUySUaNQsD01UcqA==
=ywFe
-----END PGP SIGNATURE-----
regulator: Merge up v6.4-rc3
Merge up v6.4-rc3 in order to get fixes to improve the stability of my
CI.
It's reported that the recording started right after the driver probe
doesn't work properly, and it turned out that this is related with the
codec auto-suspend. Namely, after the probe phase, the usage count
goes zero, and the auto-suspend is programmed, but the codec is kept
still active until the auto-suspend expiration. When an application
(e.g. alsactl) updates the mixer values at this moment, the values are
cached but not actually written. Then, starting arecord thereafter
also results in the silence because of the missing unmute.
The root cause is the handling of "lazy update" mode; when a mixer
value is updated *after* the suspend, it should update only the cache
and exits. At the resume, the cached value is written to the device,
in turn. The problem is that the current code misinterprets the state
of auto-suspend as if it were already suspended.
Although we can add the check of the actual device state after
pm_runtime_get_if_in_use() for catching the missing state, this won't
suffice; the second call of regmap_update_bits_check() will skip
writing the register because the cache has been already updated by the
first call. So we'd need fixes in two different places.
OTOH, a simpler fix is to replace pm_runtime_get_if_in_use() with
pm_runtime_get_if_active() (with ign_usage_count=true). This change
implies that the driver takes the pm refcount if the device is still
in ACTIVE state and continues the processing. A small caveat is that
this will leave the auto-suspend timer. But, since the timer callback
itself checks the device state and aborts gracefully when it's active,
this won't be any substantial problem.
Long story short: we address the missing register-write problem just
by replacing the pm_runtime_*() call in snd_hda_keep_power_up().
Fixes: fc4f000bf8 ("ALSA: hda - Fix unexpected resume through regmap code path")
Reported-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Closes: https://lore.kernel.org/r/a7478636-af11-92ab-731c-9b13c582a70d@linux.intel.com
Suggested-by: Cezary Rojewski <cezary.rojewski@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230518113520.15213-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Constraint functions have return values, they should be checked for
potential errors.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-8-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All IPCs using instance_id use 8 bit value. Original commit used 16 bit
value because FW reports possible max value in 16 bit field, but in
practice FW limits the value to 8 bits.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Configurations with multiple codecs attached to the platform are
supported but only if each from the set is different. Add new field
representing the 'Unique ID' so that codecs that share Vendor and Part
IDs can be differentiated and thus enabling support for such
configurations.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is
reserved for 'C7_1' instead.
Fixes: 580a5912d1 ("ASoC: Intel: avs: Declare module configuration types")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>