This means it uses whatever linear remapping scheme that the architecture
provides is used in the generic dma_direct ops.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
The trivial direct mapping implementation already does a virtual to
physical translation which isn't strictly a noop, and will soon learn
to do non-direct but linear physical to dma translations through the
device offset and a few small tricks. Rename it to a better fitting
name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
For architectures that just use the generic dma_noop_ops we can provide
a generic version of dma-mapping.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
To implement the x86 forbid_dac and iommu_sac_force we want an arch hook
so that it can apply the global options across all dma_map_ops
implementations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Lift the code from x86 so that we behave consistently. In the future we
should probably warn if any of these is set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
These days all devices should have a DMA coherent mask, and most dma_ops
implementations rely on that fact. But just to be sure add an assert to
ring the warning bell if that is not the case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
We want to use the dma_direct_ namespace for a generic implementation,
so rename powerpc to the second best choice: dma_nommu_.
Signed-off-by: Christoph Hellwig <hch@lst.de>
And unlike the other helpers we don't require a <asm/dma-direct.h> as
this helper is a special case for ia64 only, and this keeps it as
simple as possible.
Signed-off-by: Christoph Hellwig <hch@lst.de>
phys_to_dma, dma_to_phys and dma_capable are helpers published by
architecture code for use of swiotlb and xen-swiotlb only. Drivers are
not supposed to use these directly, but use the DMA API instead.
Move these to a new asm/dma-direct.h helper, included by a
linux/dma-direct.h wrapper that provides the default linear mapping
unless the architecture wants to override it.
In the MIPS case the existing dma-coherent.h is reused for now as
untangling it will take a bit of work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Robin Murphy <robin.murphy@arm.com>
The generic version now takes dma_pfn_offset into account, so there is no
more need for an architecture override.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
This makes sure the generic version can be used with architectures /
devices that have a DMA offset in the direct mapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
We always use the stub definitions, so remove the unused other code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
CONFIG_ALPHA_JENSEN has failed to compile since commit 6aca0503
("alpha/dma: use common noop dma ops"), so mark it as broken.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Pull parisc fixes from Helge Deller:
- Many small fixes to show the real physical addresses of devices
instead of hashed addresses.
- One important fix to unbreak 32-bit SMP support: We forgot to 16-byte
align the spinlocks in the assembler code.
- Qemu support: The host will get a chance to sleep when the parisc
guest is idle. We use the same mechanism as the power architecture by
overlaying the "or %r10,%r10,%r10" instruction which is simply a nop
on real hardware.
* 'parisc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: qemu idle sleep support
parisc: Fix alignment of pa_tlb_lock in assembly on 32-bit SMP kernel
parisc: Show unhashed EISA EEPROM address
parisc: Show unhashed HPA of Dino chip
parisc: Show initial kernel memory layout unhashed
parisc: Show unhashed hardware inventory
-----BEGIN PGP SIGNATURE-----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=b5fz
-----END PGP SIGNATURE-----
Merge tag 'apparmor-pr-2018-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor fix from John Johansen:
"This fixes a regression when the kernel feature set is reported as
supporting mount and policy is pinned to a feature set that does not
support mount mediation"
* tag 'apparmor-pr-2018-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: fix regression in mount mediation when feature set is pinned
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJaUhWqAAoJEL1qUBy3i3wmDysP/1mi2O3hzvTW06a3c4HMZpi/
Wp4HHuJkJQhq3UUT/s9OLzimWVJhH8lNorHm0zPOYCj3C7L9NBgomV1JCdSSevQM
b1L2u5oXWnZrutLE7Echmf5CC6b9ntZBlfQIzULS7N7e0wFwpBPOF06nhfx/nkvT
9quci3Ha9NTIEUovuj3Lqs4Nh76qkvFhZ0LK39KWT5Gx60niCPTWmyCMEtp5qvWl
Y+RXvyRD7XYTSdkL8WJ3j/fDFVdj1zyRziir1BJ8K365TeyxH1Jb0EO/QY6ZnEX0
EMMi85GklPlMa911Hu3fCdok7dYoIVnC1BYnd3n8Em9EkvFUpvdCRAUrTHK/y1iy
1HhunswN+UTXp/04tjGDxlmXJt9DlfbcCi95hNKaeMBTO6/rj2AOug7xDqJOqTSg
/TZYEuOnvAKa0bv4JdtdX9Aw1Tl5vIEL/rYPhW/BPQk6yz7+1LFIB4WUC11lmb/T
4da6/Oxxn/94LD5mq9FriQPL+ibNPVWDe747x8yh84lC6/UT7TnxuWZGE70QvBa7
1bZHb9T2yK+/d05QjejdgQqdhKUAtAnSWv3/bTow9JdGa5HeJpiLaWa/KvLvYuua
y3A7QrpPVvdsyTWKzhgbAzV9OvQSsvnxigEQUPTLamCEWv20PZFaP775ubWOZqIx
05ZFOYSPLF/wyHqcttMM
=9XZT
-----END PGP SIGNATURE-----
Merge tag 'led_fixes_for_4.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED fix from Jacek Anaszewski:
"The commit 2b83ff96f5 for 4.15-rc6, which was fixing LED brightness
setting after clearing delay_off broke the behavior on any alteration
of delay_on{off} properties, due to use of a LED core helper that does
too much for this particular case"
* tag 'led_fixes_for_4.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: core: Fix regression caused by commit 2b83ff96f5
Commit 2b83ff96f5 ("led: core: Fix brightness setting when setting delay_off=0")
replaced del_timer_sync(&led_cdev->blink_timer) with led_stop_software_blink()
in led_blink_set(), which additionally clears LED_BLINK_SW flag as well as
zeroes blink_delay_on and blink_delay_off properties of the struct led_classdev.
Cleansing of the latter ones wasn't required to fix the original issue but
wasn't considered harmful. It nonetheless turned out to be so in case when
pointer to one or both props is passed to led_blink_set() like in the
ledtrig-timer.c. In such cases zeroes are passed later in delay_on and/or
delay_off arguments to led_blink_setup(), which results either in stopping
the software blinking or setting blinking frequency always to 1Hz.
Avoid using led_stop_software_blink() and add a single call required
to clear LED_BLINK_SW flag, which was the only needed modification to
fix the original issue.
Fixes 2b83ff96f5 ("led: core: Fix brightness setting when setting delay_off=0")
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Pull vfs fixes from Al Viro:
- untangle sys_close() abuses in xt_bpf
- deal with register_shrinker() failures in sget()
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix "netfilter: xt_bpf: Fix XT_BPF_MODE_FD_PINNED mode of 'xt_bpf_info_v1'"
sget(): handle failures of register_shrinker()
mm,vmscan: Make unregister_shrinker() no-op if register_shrinker() failed.
s390:
* Two fixes for potential bitmap overruns in the cmma migration code
x86:
* Clear guest provided GPRs to defeat the Project Zero PoC for CVE
2017-5715
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJaUTJ4AAoJEED/6hsPKofohk0IAJAFlMG66u5MxC0kSM61U4Zf
1vkzRwAkBbcN82LpGQKbqabVyTq0F3aLipyOn6WO5SN0K5m+OI2OV/aAroPyX8bI
F7nWIqTXLhJ9X6KXINFvyavHMprvWl8PA72tR/B/7GhhfShrZ2wGgqhl0vv/kCUK
/8q+5e693yJqw8ceemin9a6kPJrLpmjeH+Oy24KIlGbvJWV4UrIE86pRHnAnBtg8
L7Vbxn5+ezKmakvBh+zF8NKcD1zHDcmQZHoYFPsQT0vX5GPoYqT2bcO6gsh1Grmp
8ti6KkrnP+j2A/OEna4LBWfwKI/1xHXneB22BYrAxvNjHt+R4JrjaPpx82SEB4Y=
=URMR
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"s390:
- Two fixes for potential bitmap overruns in the cmma migration code
x86:
- Clear guest provided GPRs to defeat the Project Zero PoC for CVE
2017-5715"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: vmx: Scrub hardware GPRs at VM-exit
KVM: s390: prevent buffer overrun on memory hotplug during migration
KVM: s390: fix cmma migration for multiple memory slots
In the current driver, OOB bytes are accessed in raw mode, and when a
page access is done with NDCR_SPARE_EN set and NDCR_ECC_EN cleared, the
driver must read the whole spare area (64 bytes in case of a 2k page,
16 bytes for a 512 page). The driver was only reading the free OOB
bytes, which was leaving some unread data in the FIFO and was somehow
leading to a timeout.
We could patch the driver to read ->spare_size + ->ecc_size instead of
just ->spare_size when READOOB is requested, but we'd better make
in-band and OOB accesses consistent.
Since the driver is always accessing in-band data in non-raw mode (with
the ECC engine enabled), we should also access OOB data in this mode.
That's particularly useful when using the BCH engine because in this
mode the free OOB bytes are also ECC protected.
Fixes: 43bcfd2bb2 ("mtd: nand: pxa3xx: Add driver-specific ECC BCH support")
Cc: stable@vger.kernel.org
Reported-by: Sean Nyekjær <sean.nyekjaer@prevas.dk>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Richard Weinberger <richard@nod.at>
Just one fix to correctly return SEGV_ACCERR when we take a SEGV on a mapped
region. The bug was introduced in the refactoring of the page fault handler we
did in the previous release.
Thanks to:
John Sperbeck.
-----BEGIN PGP SIGNATURE-----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=VAzk
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"Just one fix to correctly return SEGV_ACCERR when we take a SEGV on a
mapped region. The bug was introduced in the refactoring of the page
fault handler we did in the previous release.
Thanks to John Sperbeck"
* tag 'powerpc-4.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Fix SEGV on mapped region to return SEGV_ACCERR
Add qemu idle sleep support when running under qemu with SeaBIOS PDC
firmware.
Like the power architecture we use the "or" assembler instructions,
which translate to nops on real hardware, to indicate that qemu shall
idle sleep.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Richard Henderson <rth@twiddle.net>
CC: stable@vger.kernel.org # v4.9+
Pull input fixes from Dmitry Torokhov:
"Just a few driver fixups, nothing exciting"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xen-kbdfront - do not advertise multi-touch pressure support
Input: hideep - fix compile error due to missing include file
Input: elants_i2c - do not clobber interrupt trigger on x86
Input: joystick/analog - riscv has get_cycles()
Input: elantech - add new icbody type 15
Input: ims-pcu - fix typo in the error message
When the mount code was refactored for Labels it was not correctly
updated to check whether policy supported mediation of the mount
class. This causes a regression when the kernel feature set is
reported as supporting mount and policy is pinned to a feature set
that does not support mount mediation.
BugLink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=882697#41
Fixes: 2ea3ffb778 ("apparmor: add mount mediation")
Reported-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
-----BEGIN PGP SIGNATURE-----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=WIOv
-----END PGP SIGNATURE-----
Merge tag 'for-4.15-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"We have two more fixes for 4.15, both aimed for stable.
The leak fix is obvious, the second patch fixes a bug revealed by the
refcount API, when it behaves differently than previous atomic_t and
reports refs going from 0 to 1 in one case"
* tag 'for-4.15-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix refcount_t usage when deleting btrfs_delayed_nodes
btrfs: Fix flush bio leak
-----BEGIN PGP SIGNATURE-----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=8CZD
-----END PGP SIGNATURE-----
Merge tag 'mfd-fixes-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD fix from Lee Jones:
"Late bugfix to plug a leak in rtsx_pcr"
* tag 'mfd-fixes-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: rtsx: Release IRQ during shutdown
Pull more x86 pti fixes from Thomas Gleixner:
"Another small stash of fixes for fallout from the PTI work:
- Fix the modules vs. KASAN breakage which was caused by making
MODULES_END depend of the fixmap size. That was done when the cpu
entry area moved into the fixmap, but now that we have a separate
map space for that this is causing more issues than it solves.
- Use the proper cache flush methods for the debugstore buffers as
they are mapped/unmapped during runtime and not statically mapped
at boot time like the rest of the cpu entry area.
- Make the map layout of the cpu_entry_area consistent for 4 and 5
level paging and fix the KASLR vaddr_end wreckage.
- Use PER_CPU_EXPORT for per cpu variable and while at it unbreak
nvidia gfx drivers by dropping the GPL export. The subject line of
the commit tells it the other way around, but I noticed that too
late.
- Fix the ASM alternative macros so they can be used in the middle of
an inline asm block.
- Rename the BUG_CPU_INSECURE flag to BUG_CPU_MELTDOWN so the attack
vector is properly identified. The Spectre mitigations will come
with their own bug bits later"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pti: Rename BUG_CPU_INSECURE to BUG_CPU_MELTDOWN
x86/alternatives: Add missing '\n' at end of ALTERNATIVE inline asm
x86/tlb: Drop the _GPL from the cpu_tlbstate export
x86/events/intel/ds: Use the proper cache flush method for mapping ds buffers
x86/kaslr: Fix the vaddr_end mess
x86/mm: Map cpu_entry_area at the same place on 4/5 level
x86/mm: Set MODULES_END to 0xffffffffff000000
Pull EFI updates from Thomas Gleixner:
- A fix for a add_efi_memmap parameter regression which ensures that
the parameter is parsed before it is used.
- Reinstate the virtual capsule mapping as the cached copy turned out
to break Quark and other things
- Remove Matt Fleming as EFI co-maintainer. He stepped back a few days
ago. Thanks Matt for all your great work!
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove Matt Fleming as EFI co-maintainer
efi/capsule-loader: Reinstate virtual capsule mapping
x86/efi: Fix kernel param add_efi_memmap regression
Pull s390 fixes from Martin Schwidefsky:
"Four bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: fix wrongly assigned configuration data
s390: fix preemption race in disable_sacf_uaccess
s390/sclp: disable FORTIFY_SOURCE for early sclp code
s390/pci: handle insufficient resources during dma tlb flush
