The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid a leaked reference.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Fixes: 08c2a4bc9f ("ALSA: hda: move Intel SoundWire ACPI scan to dedicated module")
Message-ID: <20240426152731.38420-1-pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The SOF driver is selected whenever specific I2C/I2S HIDs are reported
as 'present' in the ACPI DSDT. In some cases, an HID is reported but
the hardware does not actually rely on I2C/I2S. This false positive
leads to an invalid selection of the SOF driver and as a result an
invalid topology is loaded.
This patch hardens the detection with a check that the NHLT table is
consistent with the report of an I2S-based codec in DSDT. This table
should expose at least one SSP endpoint configured for an I2S-codec
connection.
Tested on Huawei Matebook D14 (NBLB-WAX9N) using an HDaudio codec with
an invalid ES8336 ACPI HID reported:
[ 7.858249] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 7.858312] snd_hda_intel 0000:00:1f.3: snd_intel_dsp_find_config: no valid SSP found for HID ESSX8336, skipped
Reported-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Tested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Closes: https://github.com/thesofproject/linux/issues/4934
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Message-ID: <20240426152818.38443-1-pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In case the use_pio_for_commands flag is set we must not enable the
CORB DMA to make sure that it is not interfering with the immediate
command mode.
Convert the snd_hdac_bus_send_cmd/snd_hdac_bus_get_response as wrappers to
call either the PIO or CORB based command handling depending on the
use_pio_for_commands flag.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240409083812.14001-3-peter.ujfalusi@linux.intel.com>
A relatively large set of fixes here, the biggest piece of it is a
series correcting some problems with the delay reporting for Intel SOF
cards but there's a bunch of other things. Everything here is driver
specific except for a fix in the core for an issue with sign extension
handling volume controls.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmYPJIUACgkQJNaLcl1U
h9Ap8Qf/Xr2YP+KJxiD7g52grelyqjUdMCBkoB5Ndf4BU/mBl5X1yZkBuiTEB24D
dcjamLuxNHGJhrHalYEfok6wRK3RMlkDZ8SNgpCP9rmOH0cSdt/8I3vUXA/XUKrx
SnceTSZC1S7BSRk26IKf2UdFRULMSGpC87mVLxi7DT+nmuIAigGau3yBPXveG00p
OLOYmJK9vwdlxAkfIp0ddYx3iTqfaq55W5ttWadoLG9gpoGbDzkvapBsZebqlGeo
MkZrur70Vi7ousGATkzQHCkEUD8atNOTRrrAgVmzgBbUy3Y6LOmeMwiH306wXJAq
XHiYYLCPlPI5myNYHeKmOQbCK1AzpA==
=/2l+
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.9-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.9
A relatively large set of fixes here, the biggest piece of it is a
series correcting some problems with the delay reporting for Intel SOF
cards but there's a bunch of other things. Everything here is driver
specific except for a fix in the core for an issue with sign extension
handling volume controls.
Add a helper function intel_nhlt_ssp_device_type() to detect the type
of specific SSP port. The result is nhlt_device_type enum type which
could be NHLT_DEVICE_BT or NHLT_DEVICE_I2S.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20231127120657.19764-2-peter.ujfalusi@linux.intel.com>
This was a relatively calm development cycle. Most of changes are
rather small device-specific fixes and enhancements. The only
significant changes in ALSA core are code refactoring with the recent
cleanup infrastructure, which should bring no functionality changes.
Some highlights below:
Core:
- Lots of cleanups in ALSA core code with automatic kfree cleanup
and locking guard macros
- New ALSA core kunit test
ASoC:
- SoundWire support for AMD ACP 6.3 systems
- Support for reporting version information for AVS firmware
- Support DSPless mode for Intel Soundwire systems
- Support for configuring CS35L56 amplifiers using EFI calibration
data
- Log which component is being operated on as part of power management
trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
HD- and USB-audio:
- More Cirrus HD-audio codec support
- TAS2781 HD-audio codec fixes
- Scarlett2 mixer fixes
Others:
- Enhancement of virtio driver for audio control supports
- Cleanups of legacy PM code with new macros
- Firewire sound updates
-----BEGIN PGP SIGNATURE-----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=h9kz
-----END PGP SIGNATURE-----
Merge tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This was a relatively calm development cycle. Most of changes are
rather small device-specific fixes and enhancements. The only
significant changes in ALSA core are code refactoring with the recent
cleanup infrastructure, which should bring no functionality changes.
Some highlights below:
Core:
- Lots of cleanups in ALSA core code with automatic kfree cleanup and
locking guard macros
- New ALSA core kunit test
ASoC:
- SoundWire support for AMD ACP 6.3 systems
- Support for reporting version information for AVS firmware
- Support DSPless mode for Intel Soundwire systems
- Support for configuring CS35L56 amplifiers using EFI calibration
data
- Log which component is being operated on as part of power
management trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
HD- and USB-audio:
- More Cirrus HD-audio codec support
- TAS2781 HD-audio codec fixes
- Scarlett2 mixer fixes
Others:
- Enhancement of virtio driver for audio control supports
- Cleanups of legacy PM code with new macros
- Firewire sound updates"
* tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (307 commits)
ALSA: usb-audio: Stop parsing channels bits when all channels are found.
ALSA: hda/tas2781: remove unnecessary runtime_pm calls
ALSA: hda/realtek - ALC236 fix volume mute & mic mute LED on some HP models
ALSA: aaci: Delete unused variable in aaci_do_suspend
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range
ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values
ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection
ALSA: hda/tas2781: restore power state after system_resume
ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend
ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend
ALSA: hda/tas2781: add lock to system_suspend
ALSA: hda/tas2781: use dev_dbg in system_resume
ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops
platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57
ALSA: hda: cs35l56: Add support for CS35L54 and CS35L57
ASoC: cs35l56: Add support for CS35L54 and CS35L57
ASoC: Intel: catpt: Carefully use PCI bitwise constants
ALSA: hda: hda_component: Include sound/hda_codec.h
ALSA: hda: hda_component: Add missing #include guards
...
Commit 78f613ba1e ("drm/i915: finish removal of CNL") and its friends
removed support for i915 for all CNL-based platforms. HDAudio library,
however, still treats such platforms as valid candidates for i915
binding. Update query mechanism to reflect changes made in drm tree.
At the same time, i915 support for LKF-based platforms has not been
provided so remove them from valid binding candidates.
Link: https://lore.kernel.org/all/20210728215946.1573015-1-lucas.demarchi@intel.com/
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240226124432.1203798-2-cezary.rojewski@intel.com
When BDL table entry overflow happens, the driver spews an error
message explicitly. But basically this condition can be triggered
easily by an application and it may flood of error logs
unnecessarily.
Downgrade the error message with dev_dbg() as a debug message
instead.
Link: https://lore.kernel.org/r/20240221100607.6565-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are two ways to opportunistically increment a device's runtime PM
usage count, calling either pm_runtime_get_if_active() or
pm_runtime_get_if_in_use(). The former has an argument to tell whether to
ignore the usage count or not, and the latter simply calls the former with
ign_usage_count set to false. The other users that want to ignore the
usage_count will have to explicitly set that argument to true which is a
bit cumbersome.
To make this function more practical to use, remove the ign_usage_count
argument from the function. The main implementation is in a static
function called pm_runtime_get_conditional() and implementations of
pm_runtime_get_if_active() and pm_runtime_get_if_in_use() are moved to
runtime.c.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Takashi Iwai <tiwai@suse.de> # sound/
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> # drivers/accel/ivpu/
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> # drivers/gpu/drm/i915/
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Existing DSDT or SSDT platforms hard-code clock and frame shape
configurations. For validation, we'd like to use alternate
configurations. It's not always possible to generate new tables due to
missing symbols, and modifying existing objects usually leads to
AE_OBJECT_EXIST errors.
The mechanism suggested in this patch is to add a NEW ACPI controller
device with a different _ADR value. e.g.
Scope (_SB_.PC00.RP08.PXSX.HDAS) {
Device (SDWP)
{
Name (_ADR, 0x40000001) // _ADR: Address
The desired _ADR can be passed as a parameter with
options snd-intel-sdw-acpi sdw_ctrl_addr=0x40000001
This solution leads to minimal tables with just what the developers or
validation engineers need, and without overriding any of the existing
firmware definitions. It's consistent with the recommendation to
extend ACPI definitions and not redefine them with a risk of conflict.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240208163750.92849-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that the driver core can properly handle constant struct bus_type,
move all of the sound subsystem struct bus_type structures as const,
placing them into read-only memory which can not be modified at runtime.
Note, this fixes a duplicate definition of ac97_bus_type, which somehow
was declared extern in a .h file, and then static as a prototype in a .c
file, and then properly later on in the same .c file. Amazing that no
compiler warning ever showed up for this.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Dawei Li <set_pte_at@outlook.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: linux-sound@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/2023121945-immersion-budget-d0aa@gregkh
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Same usual filters, SOF is required for DMIC and/or SoundWire support.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231204212710.185976-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce a set of functions that ultimately facilite SDxFMT-related
calculations in atomic manner:
First, introduce snd_pcm_subformat_width() and snd_pcm_hw_params_bits()
helpers that separate the base functionality from the HDAudio-specific
one.
snd_hdac_format_normalize() - format converter. S20_LE, S24_LE and their
unsigned and BE friends are invalid from HDAudio perspective but still
can be specified as function argument due to compatibility reasons.
snd_hdac_stream_format_bits() - obtain just the bits-per-sample value.
Does not ignore subformat and msbits parameters.
snd_hdac_stream_format() and snd_hdac_spdif_stream_format() - obtain the
SDxFMT value given the audio format parameters. The former is stripped
away of spdif-related information. Useful for users that do not care
about them.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20231117120610.1755254-5-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Update mechanism for querying supported PCMs to allow for granular
format selection when container size is 32 bits. Currently always the
highest bit depth is selected, regardless of how many actual formats
codec in question supports.
Acked-by: Mark Brown <broonie@kernel.org>
Co-developed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20231117120610.1755254-3-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When looking up DMIC blob from the NHLT table and the format is 32 bits,
ignore the vbps matching for 32 bps for DMIC since some NHLT table have
the vbps as 24, some have it as 32.
The DMIC hardware supports only one type of 32 bit sample size, which is
24 bit sampling on the MSB side and bits[1:0] is used for indicating the
channel number.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20231127111658.17275-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a couple of loops over the all streams, we check the bitmap against
the loop counter. A more correct reference would be, however, the
index of each stream, instead.
This patch corrects the check of bitmaps to the stream index.
Note that this change doesn't fix anything for now; all existing
drivers set up the stream indices properly, hence the loop count is
always equal with the stream index. That said, this change is only
for consistency.
Link: https://lore.kernel.org/r/20231121154125.4888-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some Jasperlake Chromebooks overwrite the system vendor DMI value to the
name of the OEM that manufactured the device. This breaks Chromebook
quirk detection as it expects the system vendor to be "Google".
Add another quirk detection entry that looks for "Google" in the BIOS
version.
Cc: stable@vger.kernel.org
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231018235944.1860717-1-markhas@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that all drivers have moved from modprobe loading to
handling -EPROBE_DEFER, we can remove the argument again.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-14-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Xe is a new driver for intel GPU's that shares the sound related code
with i915.
The modprobe mechanism is being replaced by the -EPROBE_DEFER mechanism,
so we don't need to add a modprobe xe call. Adding this would have
required a telepathy module to correctly guess whether to load i915 or
xe.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-9-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Xe is a new GPU driver that re-uses the display (and sound) code from
i915. It's no longer possible to load i915, as the GPU can be driven
by the xe driver instead.
The new behavior will return -EPROBE_DEFER, and wait for a compatible
driver to be loaded instead of modprobing i915.
Converting all drivers at the same time is a lot of work, instead we
will convert each user one by one.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-8-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Selecting CONFIG_DRM selects CONFIG_VIDEO_NOMODESET, which exports
video_firmware_drivers_only(). This can be used as a first
approximation on whether i915 will be available. It's safe to use as
this is only built when CONFIG_SND_HDA_I915 is selected by CONFIG_I915.
It's not completely fool proof, as you can boot with "nomodeset
i915.modeset=1" to make i915 load regardless, or use
"i915.force_probe=!*" to never load i915, but the common case of
booting with nomodeset to disable all GPU drivers this will work as
intended.
Because of this, we add an extra module parameter,
snd_hda_core.gpu_bind that can be used to signal users intent.
-1 follows nomodeset, 0 disables binding, 1 forces wait/-EPROBE_DEFER
on binding.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-7-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AudioDSP firmware is the one who kicks SDxFIFOS calculation when a
stream is decoupled mode. During firmware bring up procedure, there is
no firmware running and the code-loading stream is always a decoupled
one. So, there is none to trigger the calculation and we end up with
false-positive timeout (-110) messages.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231006102857.749143-4-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
SDxFIFOS register indicates the fifo size directly. There is no need to
modify the value after reading the register.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20231006102857.749143-3-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While AudioDSP drivers assign streams exclusively of HOST or LINK type,
nothing blocks a user to attempt to assign a COUPLED stream. As
supplied substream instance may be a stub, what is the case when
code-loading, such scenario ends with null-ptr-deref.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20231006102857.749143-2-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HDAudio stream setup procedure differs between revisions of the
controller device. Currently the differences are handled directly within
AudioDSP platform drivers with if-statements. Implement a more generic
approach and expose a function that a platform driver may use to ensure
the correct procedure is followed each time.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230926080623.43927-3-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Software shall read SDxFIFOS calculated by the hardware and notify if
invalid value is programmed before continuing the stream preparation.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230926080623.43927-2-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use consistently u8 for sdw link index. The id is limited to 4, u8 is
adequate in size to store it.
This change will also fixes the following compiler warning/error (W=1):
sound/hda/intel-sdw-acpi.c: In function ‘sdw_intel_acpi_scan’:
sound/hda/intel-sdw-acpi.c:34:35: error: ‘-subproperties’ directive output may be truncated writing 14 bytes into a region of size between 7 and 17 [-Werror=format-truncation=]
34 | "mipi-sdw-link-%d-subproperties", i);
| ^~~~~~~~~~~~~~
In function ‘is_link_enabled’,
inlined from ‘sdw_intel_scan_controller’ at sound/hda/intel-sdw-acpi.c:106:8,
inlined from ‘sdw_intel_acpi_scan’ at sound/hda/intel-sdw-acpi.c:180:9:
sound/hda/intel-sdw-acpi.c:33:9: note: ‘snprintf’ output between 30 and 40 bytes into a destination of size 32
33 | snprintf(name, sizeof(name),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
34 | "mipi-sdw-link-%d-subproperties", i);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The warnings got brought to light by a recent patch upstream:
commit 6d4ab2e97d ("extrawarn: enable format and stringop overflow warnings in W=1")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912162617.29178-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've received a fairly wide range of changes at this time, including
for ALSA and ASoC core, but all of them are rather small changes.
Here are some highlights:
ALSA / ASoC Core:
- Fixes of inconsistent locking around control API helpers
- A few new control API functions and cleanups
- Workarounds for potential UAFs by delayed kobj releases
- Unified PCM copy ops with iov_iter
- Continued efforts for ASoC API cleanups
ASoC:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes
- Create a library function for intlog10() and use it in the NAU8825
driver
- Convert drivers to use the more modern maple tree register cache
- Lots of work on the SOF framework, AMD and Intel drivers, including a
lot of cleanup and new device support
- Standardization of the presentation of jacks from drivers
- Provision of some generic sound card DT properties
- Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821,
AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel
platforms including AVS machines with ES8336 and RT5663, Mediatek
MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110
Others:
- New test coverage including ASoC and topology tests in KUnit;
this also involves enabling UML builds of ALSA since that's the
default KUnit test environment which pulls in the addition of some
stubs to the driver
- More enhancement of pcmtest driver
- A few fixes / enhancements of MIDI 2.0 UMP core
- Using PCI definitions in allover HD-audio code
- Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs
- CS35L41 HD-audio sub-codec improvements
- Continued emu10k1 improvements
-----BEGIN PGP SIGNATURE-----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=Rr0i
-----END PGP SIGNATURE-----
Merge tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've received a fairly wide range of changes at this time, including
for ALSA and ASoC core, but all of them are rather small changes.
Here are some highlights:
ALSA / ASoC Core:
- Fixes of inconsistent locking around control API helpers
- A few new control API functions and cleanups
- Workarounds for potential UAFs by delayed kobj releases
- Unified PCM copy ops with iov_iter
- Continued efforts for ASoC API cleanups
ASoC:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes
- Create a library function for intlog10() and use it in the NAU8825
driver
- Convert drivers to use the more modern maple tree register cache
- Lots of work on the SOF framework, AMD and Intel drivers, including
a lot of cleanup and new device support
- Standardization of the presentation of jacks from drivers
- Provision of some generic sound card DT properties
- Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821,
AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel
platforms including AVS machines with ES8336 and RT5663, Mediatek
MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110
Others:
- New test coverage including ASoC and topology tests in KUnit; this
also involves enabling UML builds of ALSA since that's the default
KUnit test environment which pulls in the addition of some stubs to
the driver
- More enhancement of pcmtest driver
- A few fixes / enhancements of MIDI 2.0 UMP core
- Using PCI definitions in allover HD-audio code
- Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs
- CS35L41 HD-audio sub-codec improvements
- Continued emu10k1 improvements"
* tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (693 commits)
ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl
ASoC: dwc: i2s: Fix unused functions
ALSA: usb-audio: Don't try to submit URBs after disconnection
ALSA: emu10k1: add separate documentation for E-MU cards
ALSA: emu10k1: more documentation updates
ALSA: emu10k1: de-duplicate audigy-mixer.rst vs. sb-live-mixer.rst
ALSA: ump: Fix -Wformat-truncation warnings
ALSA: hda: Add missing dependency on CONFIG_EFI for Cirrus/TI sub-codecs
ALSA: doc: Fix missing backquote in midi-2.0.rst
ALSA: hda/realtek: Add quirk for mute LEDs on HP ENVY x360 15-eu0xxx
ALSA: hda/tas2781: Switch back to use struct i2c_driver's .probe()
ASoC: soc-core.c: Do not error if a DAI link component is not found
ASoC: codecs: Fix error code in aw88261_i2c_probe()
ASoC: audio-graph-card.c: move audio_graph_parse_of()
ASoC: cs42l43: Use new-style PM runtime macros
ALSA: documentation: Add description for USB MIDI 2.0 gadget driver
ALSA: ump: Don't create unused substreams for static blocks
ALSA: ump: Fill group names for legacy rawmidi substreams
ALSA: usb-audio: Attach legacy rawmidi after probing all UMP EPs
ALSA: ac97: Fix possible error value of *rac97
...
AlderLake and RaptorLake Chromebooks currently use the HDA driver by
default. Add a quirk to use the SOF driver on these platforms, which is
needed for functional internal audio.
Signed-off-by: Brady Norander <bradynorander@gmail.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/ZNuDLk5hgmfKrZg6@arch
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Expand the HDA/I915 connectivity check to correctly handle
the PCI topology used in some Intel Arrow Lake products.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: "T, Arun" <arun.t@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
One more PCI ID for the road.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HDA driver intentionally drops repeated writes to registers in some
circumstances, beyond the suppression of noop writes that regmap does in
regmap_update_bits(). It does this by checking if the register is cached
before doing a regmap_update_bits(), now we have an API for querying this
directly use it directly rather than trying a read in cache only mode
making the code a little clearer.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230717-regmap-cache-check-v1-3-73ef688afae3@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use PCI device IDs from pci_ids.h header. Also simplify comments for
Alder Lake and Raptor Lake platforms, as new IDs make it clear what
revision is in use.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # for Intel Tangier ID
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-10-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of using local macro to match PCI device, use global one.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-8-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current code references 0x1a98 which is BXT-M (not -T as it is
commented) and it's an RVP, BXT-M B0 to be specific. From what we know
no BXT is available on market.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The variable codec->regmap is often protected by the lock
codec->regmap_lock when is accessed. However, it is accessed without
holding the lock when is accessed in snd_hdac_regmap_sync():
if (codec->regmap)
In my opinion, this may be a harmful race, because if codec->regmap is
set to NULL right after the condition is checked, a null-pointer
dereference can occur in the called function regcache_sync():
map->lock(map->lock_arg); --> Line 360 in drivers/base/regmap/regcache.c
To fix this possible null-pointer dereference caused by data race, the
mutex_lock coverage is extended to protect the if statement as well as the
function call to regcache_sync().
[ Note: the lack of the regmap_lock itself is harmless for the current
codec driver implementations, as snd_hdac_regmap_sync() is only for
PM runtime resume that is prohibited during the codec probe.
But the change makes the whole code more consistent, so it's merged
as is -- tiwai ]
Reported-by: BassCheck <bass@buaa.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Link: https://lore.kernel.org/r/20230703031016.1184711-1-islituo@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A fairly quiet release from a core and framework point of view, but a
very big one from the point of view of new drivers:
- More refectoring from Morimoto-san, this time mainly around DAI
links and how we control the ordering of trigger() callbacks.
- Convert a lot of drivers to use maple tree based caches.
- Lots of work on the x86 driver stack.
- Compressed audio support for Qualcomm.
- Support for AMD SoundWire, Analog Devices SSM3515, Google Chameleon,
Ingenic X1000, Intel systems with various CODECs, Longsoon platforms,
Maxim MAX98388, Mediatek MT8188, Nuvoton NAU8825C, NXP platforms with
NAU8822, Qualcomm WSA884x, StarFive JH7110, Texas Instruments TAS2781.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSZjIQACgkQJNaLcl1U
h9Dm0wf/X1q4n6KSXLvSyoSUxS/RWzWgyDDX7a4iLcFiov3ehHpVwzhwI/+1xSzs
SGhg6q2rud05SejFBh+2L7HMZfdXWSfW9ukaGz3UsCdqw3/7zAUFgY1RGtjZO4lA
eH50vEME9RbkIDgyxzYe9eViaKGh2fNxIbQ2d9hx6+nIVNfuuSikvGz4K/9PD0DN
2tBgzuIWwrPIbvMV2zHDCycmVG0lqScMWjIrdpDFxa63aPTr920YqYWSoQfOUR1s
j9zlZWnclTjrqRl1GZHxnM8N70vmutZWXAB1WFjal6mmMd6lUG71CyYHvA5h5D0V
ygNpn9B5REYlHBVzI43uT3nog+iS4Q==
=dbjW
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.5
A fairly quiet release from a core and framework point of view, but a
very big one from the point of view of new drivers:
- More refectoring from Morimoto-san, this time mainly around DAI
links and how we control the ordering of trigger() callbacks.
- Convert a lot of drivers to use maple tree based caches.
- Lots of work on the x86 driver stack.
- Compressed audio support for Qualcomm.
- Support for AMD SoundWire, Analog Devices SSM3515, Google Chameleon,
Ingenic X1000, Intel systems with various CODECs, Longsoon platforms,
Maxim MAX98388, Mediatek MT8188, Nuvoton NAU8825C, NXP platforms with
NAU8822, Qualcomm WSA884x, StarFive JH7110, Texas Instruments TAS2781.
HDA can only support single register read and write operations so does not
benefit from block writes. This means it gets no benefit from using the
rbtree register cache over the maple tree register cache so convert it to
use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-alsa-hda-maple-v1-1-a2b725c8b8f5@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On loongson controller, after calling snd_hdac_stream_updateb()
to enable DMA engine, the SDnCTL.STRM will become to zero. We
need to access SDnCTL in dword to keep SDnCTL.STRM is not changed.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/27aeddf5ebbe7c69631cec0e489c1b264be94990.1686128807.git.siyanteng@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On loongson controller, RIRBSTS.RINTFL cannot be cleared,
azx_interrupt() is called all the time. We disable RIRB
interrupt, and use polling mode by default.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/d309a75424d438b958d90d797b4f1ba45468e090.1686128807.git.siyanteng@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Do not include pm_runtime.h header in files where APIs exported by
pm_runtime.h are not used.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> # for omap-mcbsp-st.c
Link: https://lore.kernel.org/r/20230517094903.2895238-2-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It's reported that the recording started right after the driver probe
doesn't work properly, and it turned out that this is related with the
codec auto-suspend. Namely, after the probe phase, the usage count
goes zero, and the auto-suspend is programmed, but the codec is kept
still active until the auto-suspend expiration. When an application
(e.g. alsactl) updates the mixer values at this moment, the values are
cached but not actually written. Then, starting arecord thereafter
also results in the silence because of the missing unmute.
The root cause is the handling of "lazy update" mode; when a mixer
value is updated *after* the suspend, it should update only the cache
and exits. At the resume, the cached value is written to the device,
in turn. The problem is that the current code misinterprets the state
of auto-suspend as if it were already suspended.
Although we can add the check of the actual device state after
pm_runtime_get_if_in_use() for catching the missing state, this won't
suffice; the second call of regmap_update_bits_check() will skip
writing the register because the cache has been already updated by the
first call. So we'd need fixes in two different places.
OTOH, a simpler fix is to replace pm_runtime_get_if_in_use() with
pm_runtime_get_if_active() (with ign_usage_count=true). This change
implies that the driver takes the pm refcount if the device is still
in ACTIVE state and continues the processing. A small caveat is that
this will leave the auto-suspend timer. But, since the timer callback
itself checks the device state and aborts gracefully when it's active,
this won't be any substantial problem.
Long story short: we address the missing register-write problem just
by replacing the pm_runtime_*() call in snd_hda_keep_power_up().
Fixes: fc4f000bf8 ("ALSA: hda - Fix unexpected resume through regmap code path")
Reported-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Closes: https://lore.kernel.org/r/a7478636-af11-92ab-731c-9b13c582a70d@linux.intel.com
Suggested-by: Cezary Rojewski <cezary.rojewski@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230518113520.15213-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
