When the new style KAE keep-alive implementation is used on compatible
Intel hardware, the clocks are maintained when codec is in D3. The
generic code in hda_cleanup_all_streams() can however interfere with
generation of audio samples in this mode, by setting the stream and
channel ids to zero.
To get full benefit of the keepalive, set the new
no_stream_clean_at_suspend quirk bit on affected Intel hardware. When
this bit is set, stream cleanup is skipped in hda_call_codec_suspend().
Special handling is needed for the case when system goes to suspend. The
stream id programming can be lost in this case. This will also cause
codec->cvt_setups to be out of sync. Handle this by implementing custom
suspend/resume handlers. If keep-alive is active for any converter, set
the quirk flags no_stream_clean_at_suspend and forced_resume. Upon
resume, keepalive programming is restored if needed.
Fixes: 15175a4f2b ("ALSA: hda/hdmi: add keep-alive support for ADL-P and DG2")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221209101822.3893675-4-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few more updates for v6.2 which can hopefully go into a later pull
request, the bulk of these are fixes, minor cleanups or new board quirks
- the one big bit that isn't is support for getting diagnostic data out
of the Intel AVS firmwares.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmOR9PIACgkQJNaLcl1U
h9C3wAf9FkTPVSSljH3u0mHDWrFjz4h+MRW8bzNGFmTSU9IEQwk2vjfXcSod1D8o
aDUhMVd1pGujc/1u6jk7virAG6IrT7mt0N6VHh4Qckxlj10EnAn/lVW0A/BWbtj3
j2j1AS1XxtYEdG0DQX7A4TAcdDysI1q66BEX3+kOlozAs8bn8Q1ZiEc2p2uaHKkY
pPNdvYQnZyxng4sQb2l3MmHtRAt3gwG6QC3VwAsGX1PNwlHqQNd6U2Tg9MQKP9q0
rwcUeutXcJihE576y+H7jsBpkopsIpSAl8Wb/LQzgDBfScY0YITPw/wUGNIUhNk7
LMNuJBQAQ66EyNJH58K2DrmXsSXOjA==
=lNJM
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.2
A few more updates for v6.2 which can hopefully go into a later pull
request, the bulk of these are fixes, minor cleanups or new board quirks
- the one big bit that isn't is support for getting diagnostic data out
of the Intel AVS firmwares.
This is a fairly sedate release for the core code, but there's been a
lot of driver work especially around the x86 platforms and device tree
updates:
- More cleanups of the DAPM code from Morimoto-san.
- Factoring out of mapping hw_params onto SoundWire configuration by
Charles Keepax.
- The ever ongoing overhauls of the Intel DSP code continue, including
support for loading libraries and probes with IPC4 on SOF.
- Support for more sample formats on JZ4740.
- Lots of device tree conversions and fixups.
- Support for Allwinner D1, a range of AMD and Intel systems, Mediatek
systems with multiple DMICs, Nuvoton NAU8318, NXP fsl_rpmsg and
i.MX93, Qualcomm AudioReach Enable, MFC and SAL, RealTek RT1318 and
Rockchip RK3588
There's more cross tree updates than usual, though all fairly minor:
- Some OMAP board file updates that were depedencies for removing their
providers in ASoC, as part of a wider effort removing the support for
the relevant OMAP platforms.
- A new I2C API required for updates to the new I2C probe API.
- A DRM update making use of a new API for fixing the capabilities
advertised via hdmi-codec.
Since this is being sent early I might send some more stuff if you've
not yet sent your pull request and there's more come in.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmOOO08ACgkQJNaLcl1U
h9BiIAf+O8zqcxtokSTS3wsoFHDp2zprTTUk3RZbxaYMFTmFrALbQVUx5EdJ179X
Dr9rL9T2iNBN7YGhDvmzoVvLrDncJEerMk7cgbc88a5tkB7ZipI7E9QliZt92QaP
ihrXAyD7ekLC6QLXrHFNmzwUeFspgtsBkT3MakcfcucuMN53UQbFwD1r0ziCJOMZ
gFnkZKBemUDsURxWR+LCveB/WYKNrZ6Bjokdg8HY1yenACMiXaoWedmIFJ2SxId3
NNS8vqUDUSEFhDaeJVBo1Ow9m8fe+dZBUeVk9Ej7bGEXxYptwtu3aODXknySa8Eb
YVlalR9qQPvaI1688WRleRWp+oyL4Q==
=x1AC
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.2
This is a fairly sedate release for the core code, but there's been a
lot of driver work especially around the x86 platforms and device tree
updates:
- More cleanups of the DAPM code from Morimoto-san.
- Factoring out of mapping hw_params onto SoundWire configuration by
Charles Keepax.
- The ever ongoing overhauls of the Intel DSP code continue, including
support for loading libraries and probes with IPC4 on SOF.
- Support for more sample formats on JZ4740.
- Lots of device tree conversions and fixups.
- Support for Allwinner D1, a range of AMD and Intel systems, Mediatek
systems with multiple DMICs, Nuvoton NAU8318, NXP fsl_rpmsg and
i.MX93, Qualcomm AudioReach Enable, MFC and SAL, RealTek RT1318 and
Rockchip RK3588
There's more cross tree updates than usual, though all fairly minor:
- Some OMAP board file updates that were depedencies for removing their
providers in ASoC, as part of a wider effort removing the support for
the relevant OMAP platforms.
- A new I2C API required for updates to the new I2C probe API.
- A DRM update making use of a new API for fixing the capabilities
advertised via hdmi-codec.
Since this is being sent early I might send some more stuff if you've
not yet sent your pull request and there's more come in.
Currently only PCM streams can enlist hdac_stream for their data
transfer. Add cstream field to hdac_ext_stream to expose possibility of
compress stream assignment in place of PCM one.
Limited to HOST-type only as there no other users on the horizon.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20221202152841.672536-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Mark Brown <broonie@kernel.org>:
The recently added pcm-test selftest has pointed out that systems with
the tda998x driver end up advertising that they support capture when in
reality as far as I can see the tda998x devices are transmit only. The
DAIs registered through hdmi-codec are bidirectional, meaning that for
I2S systems when combined with a typical bidrectional CPU DAI the
overall capability of the PCM is bidirectional. In most cases the I2S
links will clock OK but no useful audio will be returned which isn't so
bad but we should still not advertise the useless capability, and some
systems may notice problems for example due to pinmux management.
This is happening due to the hdmi-codec helpers not providing any
mechanism for indicating unidirectional audio so add one and use it in
the tda998x driver. It is likely other hdmi-codec users are also
affected but I don't have those systems to hand.
Mark Brown (2):
ASoC: hdmi-codec: Allow playback and capture to be disabled
drm: tda99x: Don't advertise non-existent capture support
drivers/gpu/drm/i2c/tda998x_drv.c | 2 ++
include/sound/hdmi-codec.h | 4 ++++
sound/soc/codecs/hdmi-codec.c | 30 +++++++++++++++++++++++++-----
3 files changed, 31 insertions(+), 5 deletions(-)
base-commit: f0c4d9fc9c
--
2.30.2
Currently the hdmi-codec driver always registers both playback and capture
capabilities but for most systems there's no actual capture capability,
usually HDMI is transmit only. Provide platform data which allows the users
to indicate what is supported so that we don't end up advertising things
to userspace that we can't actually support.
In order to avoid breaking existing users the flags in platform data are
a bit awkward and specify what should be disabled rather than doing the
perhaps more expected thing and defaulting to not supporting capture.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20221130184644.464820-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The vast majority of the current users of the SoundWire framework
have almost identical code for converting from hw_params to SoundWire
configuration. Whilst complex devices might require more, it is very
likely that most new devices will follow the same pattern. Save a
little code by factoring this out into a helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in sound/core/pcm_native.c:2676:21
left shift of 1 by 31 places cannot be represented in type 'int'
...
Call Trace:
<TASK>
dump_stack_lvl+0x8d/0xcf
ubsan_epilogue+0xa/0x44
__ubsan_handle_shift_out_of_bounds+0x1e7/0x208
snd_pcm_open_substream+0x9f0/0xa90
snd_pcm_oss_open.part.26+0x313/0x670
snd_pcm_oss_open+0x30/0x40
soundcore_open+0x18b/0x2e0
chrdev_open+0xe2/0x270
do_dentry_open+0x2f7/0x620
path_openat+0xd66/0xe70
do_filp_open+0xe3/0x170
do_sys_openat2+0x357/0x4a0
do_sys_open+0x87/0xd0
do_syscall_64+0x34/0x80
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com>
Link: https://lore.kernel.org/r/20221121110044.3115686-1-zhongbaisong@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The addition of AMD_HS breaks Mediatek platforms by using an index
previously allocated to Mediatek. This is a backwards-compatibility
issue and needs to be fixed. All firmware released by AMD needs to be
re-generated and re-distributed.
Fixes: ed2562c64b ("ASoC: SOF: Adding amd HS functionality to the sof core")
Link: https://github.com/thesofproject/sof/issues/6615
Link: https://lore.kernel.org/alsa-devel/36a45c7a-820a-7675-d740-c0e83ae2c417@collabora.com/
Reported-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Basavaraj Hiregoudar <basavaraj.hiregoudar@amd.com>
Reviewed-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221117232120.112639-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A relatively large collection of fixes and new platform quirks here,
they're all fairly minor though - the widest possible impact is the fix
to the use of prefixes on regulator names which would have broken any
device that integrates regulators with DAPM and was used in a system
where it had a name prefix assigning to it.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmNuPEsACgkQJNaLcl1U
h9B20wgAgLLJV/QRXtVczKYK8CkLQff07//BDyxPD/COLEe05QTc+WaPFNUqJKUv
mPmXg6br2TTDVdH+HSqeKc0yrz7o+2sLfJCZcDS3dF8lUE1X+/drhIFiuWnOwRmn
dmR7jAuJ0kPWbWsX/J0EyQlLe2vKrLq72Ila8IvUXtKVaVL2wQbVb2X8yb1bRlHs
nDj9dymIRori0fm6HAwNF7txgcL51sFy8hErAB3+qcp3mRYGSE/Xung6+Brzrpgp
eMGlrwp2xhWCKT1vvyEikhJWm+2QtWFsB0H2oURsMWboNhHqZbvN/1Lt8RuFIHLz
s3nkQUrJ9AtM0qVtR2jjm5qFK/fVog==
=8C2A
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.2-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.1
A relatively large collection of fixes and new platform quirks here,
they're all fairly minor though - the widest possible impact is the fix
to the use of prefixes on regulator names which would have broken any
device that integrates regulators with DAPM and was used in a system
where it had a name prefix assigning to it.
There are some Dell SKUs that need to set the parameters of the
crossover filter (biquad). Each amplifier connects to one tweeter
speaker and one woofer speaker. We should control HPF/LPF to output the
proper frequency for the different speakers. If the codec driver got
the BQ parameters from the device property, it will apply these
parameters to the hardware.
No one is using asoc_simple_convert_fixup(), we don't need to
export its symbol. This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874jvj8ftp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Originally in commit b2ebcf42a4 ("ASoC: SOF: free widgets in
sof_tear_down_pipelines() for static pipelines"), freeing of pipeline
components at suspend was only done with recent FW as there were known
limitations in older firmware versions.
Tests show that if static pipelines are used, i.e. all pipelines are
setup whenever firmware is powered up, the reverse action of freeing all
components at power down, leads to firmware failures with also SOF2.0
and SOF2.1 based firmware.
The problems can be specific to certain topologies with e.g. components
not prepared to be freed at suspend (as this did not happen with older
SOF kernels).
To avoid hitting these problems when kernel is upgraded and used with an
older firmware, bump the firmware requirement to SOF2.2 or newer. If an
older firmware is used, and pipeline is a static one, do not free the
components at suspend. This ensures the suspend flow remains backwards
compatible with older firmware versions. This limitation does not apply
if the product configuration is updated to dynamic pipelines.
The limitation is not linked to firmware ABI, as the interface to free
pipeline components has been available already before ABI3.19. The
problem is in the implementation, so firmware version should be used to
decide whether it is safe to use the newer flow or not. This patch adds
a new SOF_FW_VER() macro to compare SOF firmware release versions.
Link: https://github.com/thesofproject/sof/issues/6475
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221101114913.1292671-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow for waiting for DRSM bit for specified stream to be cleared from
HDAudio library level. Drivers may utilize this optional step during the
stream resume procedure.
Suggested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20221027124702.1761002-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement suspend/resume() operations for component drivers. For most
scenarios, the PM flow is similar to standard streaming one, except for
the part where the position register are being saved and the lack of PCM
pages freeing. To reduce code duplication, all avs_dai_suspend_XXX() and
avs_dai_resume_XXX() functions reuse their non-PM equivalents.
Given that path binding/unbinding happens only in FE part of the stream,
the order of suspend() goes:
1. hw_free() all FE DAIs, paths are unbound here
2. hw_free() all BE DAIs
Consequently, for resume() its:
1. hw_params() all BE DAIs
2. hw_params() all FE DAIs, paths are bound here
3. prepare() all BE DAIs
4. prepare() all FE DAIs
As component->suspend/resume() do not provide substream pointer, store
it ourselves so that the PM flow has all the necessary information to
proceed.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221027124702.1761002-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Quite a few fixes here, a lot driver specific, plus some new quirks.
There was a bit of a mess with the runtime PM handling due to some
confusion in the API there which resulted in a number of commits and
reverts but that should all be stable now.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmNZkkEACgkQJNaLcl1U
h9DvZAf7B9cYxTWPVFDridvJWjWG6SfdQ3dcnINYjbuF42mCLJf+2zBA0AvER7yl
gHn0gjdag7l+ssnLBG17R4nlQb/r9VfFiuxuVzwr4iyAfL5YsynmOIJFmPt1TaiF
KAZlBG+kLC41ke389rgsIuFnY0vvWWhnank/pJplBZBkCtDz0+RO9YbTK0gVQbIU
LBB7ajP7mROLaTsVbyWTQpoWcFZ0clC7yiBx+bTtLYVhopJuvqztQlxEYyqaGteq
94jBMLza/+aDOwdVjqq4lHf/HjXEggDbYeSWpV7S9FKwVa44aGWrJoih5HweFD6R
9/+AqjWrqz23XJeDQfojzxrtt9m7cA==
=wGg1
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.1-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.1
Quite a few fixes here, a lot driver specific, plus some new quirks.
There was a bit of a mess with the runtime PM handling due to some
confusion in the API there which resulted in a number of commits and
reverts but that should all be stable now.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
In IPC4 all DSP loadable executable is a 'library' containing modules. The main
or basefw is also a library which contains multiple modules.
IPC4 allows to use loadable libraries to extend the functionality of the booted
basefw.
This series adds support for loading external libraries in case they are needed
by the loaded topology file.
The libraries must be placed to a specific firmware directory (fw_lib_prefix),
which is:
intel/avs-lib|sof-ipc4-lib/ followed by the platform name and in case of
community key use a 'community' directory.
For example for upx-i11 (community key): intel/avs-lib/tgl/community is the
default path.
The name of the library should be the UUID of the module it contains since the
library loading is going to look for the file as <module_UUID>.bin
In case there is a need to bundle multiple modules into single library, symlinks
can be used to point to the file:
module_boundle.bin
<UUID1>.bin -> module_boundle.bin
<UUID2>.bin -> module_boundle.bin
<UUID3>.bin -> module_boundle.bin
But note that in this case all modules will be loaded to the DSP since only the
whole library can be loaded, not individual modules.
On Intel HDA platforms the library loading is done via DMA and an IPC
message is also need to be sent to initiate the downloading of the new
library.
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-16-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
IPC4 based firmware supports dynamically loaded external libraries.
The libraries will be not stored alongside of the firmware or tplg files.
For intel platforms the default path will be:
intel/avs-lib|sof-ipc4-lib/<platform>/ if a community key is used on the
given machine then the libraries will be under 'community' directory, like
it is done for the firmware itself.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF stack now uses the sdev->basefw to work with the SOF firmware, the
information from plat_data can be dropped.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SPIB and DRMS capabilities are orthogonal to the DSP enablement
and can be used whether the stream is coupled or not.
The existing code partitioning makes limited sense, the capabilities
are parsed at the sound/hda level but helpers are located in
sound/hda/ext.
This patch moves all the SPIB/DRMS functionality to the sound/hda
layer. This reduces the complexity of the sound/hda/ext layer which is
now limited to handling the multi-link extensions and stream
coupling/decoupling helpers.
Note that this is an iso-functionality code move and rename, the
HDaudio legacy driver would need additional changes to make use of
these capabilities.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221019162115.185917-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All the helpers dealing with multi-link configurations are located in
the hdac_ext_controller.c, except the two set/clear routines that
modify the LOSIDV registers.
For consistency, move the two helpers and add the 'bus' prefix. One
could argue that the 'ml' prefix might be more relevant but that would
be a larger code change.
No functionality change, just move and rename.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221019162115.185917-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We should only use 'link' in the context of multi-link
configurations. Streams are configured from a different register space
and are not dependent on link except for LOSIDV settings.
Not functionality change, just pure rename.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221019162115.185917-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
No functionality change, just prefix addition to clearly identify that
the helper only applies to the 'ext' part for Intel platforms.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221019162115.185917-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have two helpers with confusing names and different purposes.
Rename bus_get_link() and bus_get_link_at() as bus_get_hlink_by_name()
and bus_get_hlink_by_addr() respectively.
No functionality change
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221019162115.185917-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Siarhei Volkau <lis8215@gmail.com>:
The patchset fixes:
- Line In path stays powered off during capturing or
bypass to mixer.
- incorrectly represented dB values in alsamixer, et al.
- incorrect represented Capture input selector in alsamixer
in Playback tab.
- wrong control selected as Capture Master
The "convert-xxx" properties only have an effect for DPCM DAI links.
A DAI link is only created as DPCM if the device tree requires it;
part of this involves checking for the use of "convert-xxx" properties.
When the convert-sample-format property was added, the checks got out
of sync. A DAI link that specified only convert-sample-format but did
not pass any of the other DPCM checks would not go into DPCM mode and
the convert-sample-format property would be silently ignored.
Fix this by adding a function to do the "convert-xxx" property checks,
instead of open-coding it in simple-card and audio-graph-card. And add
"convert-sample-format" to the check function so that DAI links using
it will be initialized correctly.
Fixes: 047a05366f ("ASoC: simple-card-utils: Fixup DAI sample format")
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20221019012302.633830-1-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc-pcm.c is coping fe hw_param to dpcm->hw_param (A),
fixup it (B), and copy it to be (C).
int dpcm_be_dai_hw_params(...)
{
...
for_each_dpcm_be(fe, stream, dpcm) {
...
/* copy params for each dpcm */
(A) memcpy(&dpcm->hw_params, &fe->dpcm[stream].hw_params, ...) ;
/* perform any hw_params fixups */
(B) ret = snd_soc_link_be_hw_params_fixup(be, &dpcm->hw_params);
...
/* copy the fixed-up hw params for BE dai */
(C) memcpy(&be->dpcm[stream].hw_params, &dpcm->hw_params, ...);
...
}
...
}
But here, (1) it is coping hw_params without caring stream (Playback/Capture),
(2) we can get same value from be. We don't need to have dpcm->hw_params.
This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/87v8ogsl6h.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The comment of snd_soc_dapm_widget_for_each_path() (= X) has
"_sink_" (= s), but this is typo.
With "_sink_" is already exist at (A). This patch fixup it.
/**
(s) * snd_soc_dapm_widget_for_each_sink_path - ...
* ****
*/
(X) #define snd_soc_dapm_widget_for_each_path(w, dir, p)
/**
(s) * snd_soc_dapm_widget_for_each_sink_path_safe - ...
* ****
*/
(X) #define snd_soc_dapm_widget_for_each_path_safe(w, dir, p, next_p)
(A) #define snd_soc_dapm_widget_for_each_sink_path(w, p)
****
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/87wn8wsl6n.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-dapm.h defines many things, but it is using
randam white space and tag.
This patch do nothing, but cleanup its white space.
This patch cleanup also 100 char in 1 line.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/87y1tcsl6u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC has snd_soc_dapm_wcache, but its member is only
snd_soc_dapm_widget.
struct snd_soc_dapm_wcache {
struct snd_soc_dapm_widget *widget;
};
It is no meaning for now, and makes code unreadable.
This patch replace snd_soc_dapm_wcache to snd_soc_dapm_widget directly.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/87a65stztf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update Pink Sardine platform ACP register header with Soundwire
Controller specific registers and other ACP registers.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20221010093941.2354783-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This has been a very quiet release for the core but quite a busy one for
drivers with a big crop of new drivers and lots of feature additions and
fixes to existing ones:
- A new string helper parse_int_array_user().
- Improvements to the SOF IPC4 code, especially around trace.
- Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple Silcon
systems, Everest ES8326, Intel Sky Lake and Kaby Lake, MediaTek
MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP, SM8250 and SM8450
and Texas Instruments SRC4392
There is a conflict with the conversion of I2C remove functions to void
in the cs42l42 driver which is fairly straightforward to resolve but
should be highlighted to Linus.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmM6tu0ACgkQJNaLcl1U
h9BHFQf9Ew/yLSHRdeJwNUEb4VjnRtXz+DLQbGeZBNnk/7Yt/STd0EaudUl0OuiJ
+Ok4bLN6/47bwp5OB0kRGdTVycUq+rR2niJu4dgcY0MkfJi7Pyumibp/biips5rw
+Qzj8oOUPu1970zmOktuy84ZY9Ikl02UEQYyUFVL1AJM3aUzfa/gQ24UCEyA2WxD
ai7TcnUf2+zkMzqvfwFeW3avLSh+9ZLRgHHB52VNQXLHO5+YDvmMmyKZydon67n1
+3QZOS57rQRXUgBOraq+AojTXs9gTFXmF8ujD1eA2qL33vqeZaf7upx76a3U/Rm+
9m+6JucR1qrJyErag2nX90HQOvUcxA==
=kv8c
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.1
This has been a very quiet release for the core but quite a busy one for
drivers with a big crop of new drivers and lots of feature additions and
fixes to existing ones:
- A new string helper parse_int_array_user().
- Improvements to the SOF IPC4 code, especially around trace.
- Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple Silcon
systems, Everest ES8326, Intel Sky Lake and Kaby Lake, MediaTek
MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP, SM8250 and SM8450
and Texas Instruments SRC4392
There is a conflict with the conversion of I2C remove functions to void
in the cs42l42 driver which is fairly straightforward to resolve but
should be highlighted to Linus.
In the PCM core and driver code, there are lots place referring to the
current PCM state via runtime->status->state. This patch introduced a
local PCM state in runtime itself and replaces those references with
runtime->state. It has improvements in two aspects:
- The reduction of a indirect access leads to more code optimization
- It avoids a possible (unexpected) modification of the state via mmap
of the status record
The status->state is updated together with runtime->state, so that
user-space can still read the current state via mmap like before,
too.
This patch touches only the ALSA core code. The changes in each
driver will follow in later patches.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220926135558.26580-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Per discussion on the alsa-devel mailing list [1], the legacy PIN to PCM
device mapping is obsolete nowadays. The maximum number of the simultaneously
usable PCM devices is equal to the HDMI codec converters.
Remove the extra PCM devices (beyond the detected converters) and force
the use of the dynamic PCM device allocation. The legacy code is removed.
I believe that all HDMI codecs have the jack sensing feature. Move the check
to the codec probe function and print a warning, if a codec without this
feature is detected.
[1] https://lore.kernel.org/alsa-devel/2f37e0b2-1e82-8c0b-2bbd-1e5038d6ecc6@perex.cz/
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220922084017.25925-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>:
This series consists of
1.Make ACP core code generic for newer SOC transition
2.Add support for Rembrandt plaform
3.Adding amd HS functionality to the sof core
4.increase SRAM inbox and outbox size to 1024
Add I2S HS control instance to the sof core.
This will help the amd topology to use the I2S HS Dai.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220913144319.1055302-4-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Martin Povišer <povik+lin@cutebit.org>:
there's a CS42L83 headphone jack codec found in Apple computers (in the
recent 'Apple Silicon' ones as well as in earlier models, one example
[1]). The part isn't publicly documented, but it appears almost
identical to CS42L42, for which we have a driver in kernel. This series
adapts the CS42L42 driver to the new part, and makes one change in
anticipation of a machine driver for the Apple computers.
Patch 1 adds new compatible to the cs42l42 schema.
Patches 2 to 7 are taken from Richard's recent series [2] adding
soundwire support to cs42l42. They are useful refactorings to build on
in the later patches, and also this way our work doesn't diverge.
(I fixed missing free_irq path in cs42l42_init, did
s/Soundwire/SoundWire/ in changelogs, rebased.)
Patch 8 exports some regmap-related symbols from cs42l42.c so they can
be used to create cs42l83 regmap in cs42l83-i2c.c later.
Patch 9 is the cs42l83 support proper.
Patch 10 implements 'set_bclk_ratio' on the cs42l42 core. This will be
called by the upcoming ASoC machine driver for 'Apple Silicon' Macs.
(We have touched on this change to be made in earlier discussion, see
[3] and replies.)
Patch 11 brings cs42l42-i2c.c in sync with cs42l83-i2c.c on
dev_err_probe() usage.
SOF topologies hard-code the MCLK used for SSP connections. That was a
bad idea in hindsight, this information should really come from BIOS
and/or machine driver.
This patch introduces a helper to scan all SSP endpoints connected to
a codec, and all formats to see what MCLK is used. When BIT(0) of the
mdivc offset if set in the SSP blob, MCLK0 is used, and likewise when
BIT(1) is set MCLK1 is used.
The case where both MCLKs are used is possible but has never been seen
in practice so should be treated as an error by the caller.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220919115350.43104-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
