Current release - regressions:
- bpf: fix crash due to out of bounds access into reg2btf_ids
- mvpp2: always set port pcs ops, avoid null-deref
- eth: marvell: fix driver load from initrd
- eth: intel: revert "Fix reset bw limit when DCB enabled with 1 TC"
Current release - new code bugs:
- mptcp: fix race in overlapping signal events
Previous releases - regressions:
- xen-netback: revert hotplug-status changes causing devices to
not be configured
- dsa:
- avoid call to __dev_set_promiscuity() while rtnl_mutex isn't held
- fix panic when removing unoffloaded port from bridge
- dsa: microchip: fix bridging with more than two member ports
Previous releases - always broken:
- bpf:
- fix crash due to incorrect copy_map_value when both spin lock
and timer are present in a single value
- fix a bpf_timer initialization issue with clang
- do not try bpf_msg_push_data with len 0
- add schedule points in batch ops
- nf_tables:
- unregister flowtable hooks on netns exit
- correct flow offload action array size
- fix a couple of memory leaks
- vsock: don't check owner in vhost_vsock_stop() while releasing
- gso: do not skip outer ip header in case of ipip and net_failover
- smc: use a mutex for locking "struct smc_pnettable"
- openvswitch: fix setting ipv6 fields causing hw csum failure
- mptcp: fix race in incoming ADD_ADDR option processing
- sysfs: add check for netdevice being present to speed_show
- sched: act_ct: fix flow table lookup after ct clear or switching
zones
- eth: intel: fixes for SR-IOV forwarding offloads
- eth: broadcom: fixes for selftests and error recovery
- eth: mellanox: flow steering and SR-IOV forwarding fixes
Misc:
- make __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor
friends not report freed skbs as drops
- force inlining of checksum functions in net/checksum.h
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=LT/x
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - regressions:
- bpf: fix crash due to out of bounds access into reg2btf_ids
- mvpp2: always set port pcs ops, avoid null-deref
- eth: marvell: fix driver load from initrd
- eth: intel: revert "Fix reset bw limit when DCB enabled with 1 TC"
Current release - new code bugs:
- mptcp: fix race in overlapping signal events
Previous releases - regressions:
- xen-netback: revert hotplug-status changes causing devices to not
be configured
- dsa:
- avoid call to __dev_set_promiscuity() while rtnl_mutex isn't
held
- fix panic when removing unoffloaded port from bridge
- dsa: microchip: fix bridging with more than two member ports
Previous releases - always broken:
- bpf:
- fix crash due to incorrect copy_map_value when both spin lock
and timer are present in a single value
- fix a bpf_timer initialization issue with clang
- do not try bpf_msg_push_data with len 0
- add schedule points in batch ops
- nf_tables:
- unregister flowtable hooks on netns exit
- correct flow offload action array size
- fix a couple of memory leaks
- vsock: don't check owner in vhost_vsock_stop() while releasing
- gso: do not skip outer ip header in case of ipip and net_failover
- smc: use a mutex for locking "struct smc_pnettable"
- openvswitch: fix setting ipv6 fields causing hw csum failure
- mptcp: fix race in incoming ADD_ADDR option processing
- sysfs: add check for netdevice being present to speed_show
- sched: act_ct: fix flow table lookup after ct clear or switching
zones
- eth: intel: fixes for SR-IOV forwarding offloads
- eth: broadcom: fixes for selftests and error recovery
- eth: mellanox: flow steering and SR-IOV forwarding fixes
Misc:
- make __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor
friends not report freed skbs as drops
- force inlining of checksum functions in net/checksum.h"
* tag 'net-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: mv643xx_eth: process retval from of_get_mac_address
ping: remove pr_err from ping_lookup
Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC"
openvswitch: Fix setting ipv6 fields causing hw csum failure
ipv6: prevent a possible race condition with lifetimes
net/smc: Use a mutex for locking "struct smc_pnettable"
bnx2x: fix driver load from initrd
Revert "xen-netback: Check for hotplug-status existence before watching"
Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"
net/mlx5e: Fix VF min/max rate parameters interchange mistake
net/mlx5e: Add missing increment of count
net/mlx5e: MPLSoUDP decap, fix check for unsupported matches
net/mlx5e: Fix MPLSoUDP encap to use MPLS action information
net/mlx5e: Add feature check for set fec counters
net/mlx5e: TC, Skip redundant ct clear actions
net/mlx5e: TC, Reject rules with forward and drop actions
net/mlx5e: TC, Reject rules with drop and modify hdr action
net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets
net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
net/mlx5: Fix possible deadlock on rule deletion
...
Pull cgroup fixes from Tejun Heo:
- Fix for a subtle bug in the recent release_agent permission check
update
- Fix for a long-standing race condition between cpuset and cpu hotplug
- Comment updates
* 'for-5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: Fix kernel-doc
cgroup-v1: Correct privileges check in release_agent writes
cgroup: clarify cgroup_css_set_fork()
cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug
Fix the following W=1 kernel warnings:
kernel/cgroup/cpuset.c:3718: warning: expecting prototype for
cpuset_memory_pressure_bump(). Prototype was for
__cpuset_memory_pressure_bump() instead.
kernel/cgroup/cpuset.c:3568: warning: expecting prototype for
cpuset_node_allowed(). Prototype was for __cpuset_node_allowed()
instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The idea is to check: a) the owning user_ns of cgroup_ns, b)
capabilities in init_user_ns.
The commit 24f6008564 ("cgroup-v1: Require capabilities to set
release_agent") got this wrong in the write handler of release_agent
since it checked user_ns of the opener (may be different from the owning
user_ns of cgroup_ns).
Secondly, to avoid possibly confused deputy, the capability of the
opener must be checked.
Fixes: 24f6008564 ("cgroup-v1: Require capabilities to set release_agent")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/stable/20220216121142.GB30035@blackbody.suse.cz/
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Masami Ichikawa(CIP) <masami.ichikawa@cybertrust.co.jp>
Signed-off-by: Tejun Heo <tj@kernel.org>
With recent fixes for the permission checking when moving a task into a cgroup
using a file descriptor to a cgroup's cgroup.procs file and calling write() it
seems a good idea to clarify CLONE_INTO_CGROUP permission checking with a
comment.
Cc: Tejun Heo <tj@kernel.org>
Cc: <cgroups@vger.kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYhDKMgAKCRCRxhvAZXjc
opUwAPwORv7MD8rh5va7LFWUxX1UFpxVILWcC1umuhHAOKZ7YAEA3DTYFrQZhxA2
nMBR6hBEDKRARIFv3zHZYflYK97FnQA=
=NPXo
-----END PGP SIGNATURE-----
Merge tag 'pidfd.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd fix from Christian Brauner:
"This fixes a problem reported by lockdep when installing a pidfd via
fd_install() with siglock and the tasklisk write lock held in
copy_process() when calling clone()/clone3() with CLONE_PIDFD.
Originally a pidfd was created prior to holding any of these locks but
this required a call to ksys_close(). So quite some time ago in
6fd2fe494b ("copy_process(): don't use ksys_close() on cleanups") we
switched to a get_unused_fd_flags() + fd_install() model.
As part of that we moved fd_install() as late as possible. This was
done for two main reasons. First, because we needed to ensure that we
call fd_install() past the point of no return as once that's called
the fd is live in the task's file table. Second, because we tried to
ensure that the fd is visible in /proc/<pid>/fd/<pidfd> right when the
task is visible.
This fix moves the fd_install() to an even later point which means
that a task will be visible in proc while the pidfd isn't yet under
/proc/<pid>/fd/<pidfd>.
While this is a user visible change it's very unlikely that this will
have any impact. Nobody should be relying on that and if they do we
need to come up with something better but again, it's doubtful this is
relevant"
* tag 'pidfd.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
copy_process(): Move fd_install() out of sighand->siglock critical section
Pull ucounts fixes from Eric Biederman:
"Michal Koutný recently found some bugs in the enforcement of
RLIMIT_NPROC in the recent ucount rlimit implementation.
In this set of patches I have developed a very conservative approach
changing only what is necessary to fix the bugs that I can see
clearly. Cleanups and anything that is making the code more consistent
can follow after we have the code working as it has historically.
The problem is not so much inconsistencies (although those exist) but
that it is very difficult to figure out what the code should be doing
in the case of RLIMIT_NPROC.
All other rlimits are only enforced where the resource is acquired
(allocated). RLIMIT_NPROC by necessity needs to be enforced in an
additional location, and our current implementation stumbled it's way
into that implementation"
* 'ucount-rlimit-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ucounts: Handle wrapping in is_ucounts_overlimit
ucounts: Move RLIMIT_NPROC handling after set_user
ucounts: Base set_cred_ucounts changes on the real user
ucounts: Enforce RLIMIT_NPROC not RLIMIT_NPROC+1
rlimit: Fix RLIMIT_NPROC enforcement failure caused by capability calls in set_user
Where commit 4ef0c5c6b5 ("kernel/sched: Fix sched_fork() access an
invalid sched_task_group") fixed a fork race vs cgroup, it opened up a
race vs syscalls by not placing the task on the runqueue before it
gets exposed through the pidhash.
Commit 13765de814 ("sched/fair: Fix fault in reweight_entity") is
trying to fix a single instance of this, instead fix the whole class
of issues, effectively reverting this commit.
Fixes: 4ef0c5c6b5 ("kernel/sched: Fix sched_fork() access an invalid sched_task_group")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Tested-by: Zhang Qiao <zhangqiao22@huawei.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/YgoeCbwj5mbCR0qA@hirez.programming.kicks-ass.net
Alexei Starovoitov says:
====================
pull-request: bpf 2022-02-17
We've added 8 non-merge commits during the last 7 day(s) which contain
a total of 8 files changed, 119 insertions(+), 15 deletions(-).
The main changes are:
1) Add schedule points in map batch ops, from Eric.
2) Fix bpf_msg_push_data with len 0, from Felix.
3) Fix crash due to incorrect copy_map_value, from Kumar.
4) Fix crash due to out of bounds access into reg2btf_ids, from Kumar.
5) Fix a bpf_timer initialization issue with clang, from Yonghong.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add schedule points in batch ops
bpf: Fix crash due to out of bounds access into reg2btf_ids.
selftests: bpf: Check bpf_msg_push_data return value
bpf: Fix a bpf_timer initialization issue
bpf: Emit bpf_timer in vmlinux BTF
selftests/bpf: Add test for bpf_timer overwriting crash
bpf: Fix crash due to incorrect copy_map_value
bpf: Do not try bpf_msg_push_data with len 0
====================
Link: https://lore.kernel.org/r/20220217190000.37925-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported various soft lockups caused by bpf batch operations.
INFO: task kworker/1:1:27 blocked for more than 140 seconds.
INFO: task hung in rcu_barrier
Nothing prevents batch ops to process huge amount of data,
we need to add schedule points in them.
Note that maybe_wait_bpf_programs(map) calls from
generic_map_delete_batch() can be factorized by moving
the call after the loop.
This will be done later in -next tree once we get this fix merged,
unless there is strong opinion doing this optimization sooner.
Fixes: aa2e93b8e5 ("bpf: Add generic support for update and delete batch ops")
Fixes: cb4d03ab49 ("bpf: Add generic support for lookup batch op")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Brian Vazquez <brianvv@google.com>
Link: https://lore.kernel.org/bpf/20220217181902.808742-1-eric.dumazet@gmail.com
While examining is_ucounts_overlimit and reading the various messages
I realized that is_ucounts_overlimit fails to deal with counts that
may have wrapped.
Being wrapped should be a transitory state for counts and they should
never be wrapped for long, but it can happen so handle it.
Cc: stable@vger.kernel.org
Fixes: 21d1c5e386 ("Reimplement RLIMIT_NPROC on top of ucounts")
Link: https://lkml.kernel.org/r/20220216155832.680775-5-ebiederm@xmission.com
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
During set*id() which cred->ucounts to charge the the current process
to is not known until after set_cred_ucounts. So move the
RLIMIT_NPROC checking into a new helper flag_nproc_exceeded and call
flag_nproc_exceeded after set_cred_ucounts.
This is very much an arbitrary subset of the places where we currently
change the RLIMIT_NPROC accounting, designed to preserve the existing
logic.
Fixing the existing logic will be the subject of another series of
changes.
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220216155832.680775-4-ebiederm@xmission.com
Fixes: 21d1c5e386 ("Reimplement RLIMIT_NPROC on top of ucounts")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Michal Koutný <mkoutny@suse.com> wrote:
> Tasks are associated to multiple users at once. Historically and as per
> setrlimit(2) RLIMIT_NPROC is enforce based on real user ID.
>
> The commit 21d1c5e386 ("Reimplement RLIMIT_NPROC on top of ucounts")
> made the accounting structure "indexed" by euid and hence potentially
> account tasks differently.
>
> The effective user ID may be different e.g. for setuid programs but
> those are exec'd into already existing task (i.e. below limit), so
> different accounting is moot.
>
> Some special setresuid(2) users may notice the difference, justifying
> this fix.
I looked at cred->ucount and it is only used for rlimit operations
that were previously stored in cred->user. Making the fact
cred->ucount can refer to a different user from cred->user a bug,
affecting all uses of cred->ulimit not just RLIMIT_NPROC.
Fix set_cred_ucounts to always use the real uid not the effective uid.
Further simplify set_cred_ucounts by noticing that set_cred_ucounts
somehow retained a draft version of the check to see if alloc_ucounts
was needed that checks the new->user and new->user_ns against the
current_real_cred(). Remove that draft version of the check.
All that matters for setting the cred->ucounts are the user_ns and uid
fields in the cred.
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220207121800.5079-4-mkoutny@suse.com
Link: https://lkml.kernel.org/r/20220216155832.680775-3-ebiederm@xmission.com
Reported-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Fixes: 21d1c5e386 ("Reimplement RLIMIT_NPROC on top of ucounts")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Michal Koutný <mkoutny@suse.com> wrote:
> It was reported that v5.14 behaves differently when enforcing
> RLIMIT_NPROC limit, namely, it allows one more task than previously.
> This is consequence of the commit 21d1c5e386 ("Reimplement
> RLIMIT_NPROC on top of ucounts") that missed the sharpness of
> equality in the forking path.
This can be fixed either by fixing the test or by moving the increment
to be before the test. Fix it my moving copy_creds which contains
the increment before is_ucounts_overlimit.
In the case of CLONE_NEWUSER the ucounts in the task_cred changes.
The function is_ucounts_overlimit needs to use the final version of
the ucounts for the new process. Which means moving the
is_ucounts_overlimit test after copy_creds is necessary.
Both the test in fork and the test in set_user were semantically
changed when the code moved to ucounts. The change of the test in
fork was bad because it was before the increment. The test in
set_user was wrong and the change to ucounts fixed it. So this
fix only restores the old behavior in one lcation not two.
Link: https://lkml.kernel.org/r/20220204181144.24462-1-mkoutny@suse.com
Link: https://lkml.kernel.org/r/20220216155832.680775-2-ebiederm@xmission.com
Cc: stable@vger.kernel.org
Reported-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Fixes: 21d1c5e386 ("Reimplement RLIMIT_NPROC on top of ucounts")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Solar Designer <solar@openwall.com> wrote:
> I'm not aware of anyone actually running into this issue and reporting
> it. The systems that I personally know use suexec along with rlimits
> still run older/distro kernels, so would not yet be affected.
>
> So my mention was based on my understanding of how suexec works, and
> code review. Specifically, Apache httpd has the setting RLimitNPROC,
> which makes it set RLIMIT_NPROC:
>
> https://httpd.apache.org/docs/2.4/mod/core.html#rlimitnproc
>
> The above documentation for it includes:
>
> "This applies to processes forked from Apache httpd children servicing
> requests, not the Apache httpd children themselves. This includes CGI
> scripts and SSI exec commands, but not any processes forked from the
> Apache httpd parent, such as piped logs."
>
> In code, there are:
>
> ./modules/generators/mod_cgid.c: ( (cgid_req.limits.limit_nproc_set) && ((rc = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC,
> ./modules/generators/mod_cgi.c: ((rc = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC,
> ./modules/filters/mod_ext_filter.c: rv = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC, conf->limit_nproc);
>
> For example, in mod_cgi.c this is in run_cgi_child().
>
> I think this means an httpd child sets RLIMIT_NPROC shortly before it
> execs suexec, which is a SUID root program. suexec then switches to the
> target user and execs the CGI script.
>
> Before 2863643fb8, the setuid() in suexec would set the flag, and the
> target user's process count would be checked against RLIMIT_NPROC on
> execve(). After 2863643fb8, the setuid() in suexec wouldn't set the
> flag because setuid() is (naturally) called when the process is still
> running as root (thus, has those limits bypass capabilities), and
> accordingly execve() would not check the target user's process count
> against RLIMIT_NPROC.
In commit 2863643fb8 ("set_user: add capability check when
rlimit(RLIMIT_NPROC) exceeds") capable calls were added to set_user to
make it more consistent with fork. Unfortunately because of call site
differences those capable calls were checking the credentials of the
user before set*id() instead of after set*id().
This breaks enforcement of RLIMIT_NPROC for applications that set the
rlimit and then call set*id() while holding a full set of
capabilities. The capabilities are only changed in the new credential
in security_task_fix_setuid().
The code in apache suexec appears to follow this pattern.
Commit 909cc4ae86f3 ("[PATCH] Fix two bugs with process limits
(RLIMIT_NPROC)") where this check was added describes the targes of this
capability check as:
2/ When a root-owned process (e.g. cgiwrap) sets up process limits and then
calls setuid, the setuid should fail if the user would then be running
more than rlim_cur[RLIMIT_NPROC] processes, but it doesn't. This patch
adds an appropriate test. With this patch, and per-user process limit
imposed in cgiwrap really works.
So the original use case of this check also appears to match the broken
pattern.
Restore the enforcement of RLIMIT_NPROC by removing the bad capable
checks added in set_user. This unfortunately restores the
inconsistent state the code has been in for the last 11 years, but
dealing with the inconsistencies looks like a larger problem.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20210907213042.GA22626@openwall.com/
Link: https://lkml.kernel.org/r/20220212221412.GA29214@openwall.com
Link: https://lkml.kernel.org/r/20220216155832.680775-1-ebiederm@xmission.com
Fixes: 2863643fb8 ("set_user: add capability check when rlimit(RLIMIT_NPROC) exceeds")
History-Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Reviewed-by: Solar Designer <solar@openwall.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Sysfs support might be disabled so we need to guard the code that
instantiates "compression" attribute with an #ifdef.
Fixes: b1ae6dc41e ("module: add in-kernel support for decompressing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
When commit e6ac2450d6 ("bpf: Support bpf program calling kernel function") added
kfunc support, it defined reg2btf_ids as a cheap way to translate the verifier
reg type to the appropriate btf_vmlinux BTF ID, however
commit c25b2ae136 ("bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULL")
moved the __BPF_REG_TYPE_MAX from the last member of bpf_reg_type enum to after
the base register types, and defined other variants using type flag
composition. However, now, the direct usage of reg->type to index into
reg2btf_ids may no longer fall into __BPF_REG_TYPE_MAX range, and hence lead to
out of bounds access and kernel crash on dereference of bad pointer.
Fixes: c25b2ae136 ("bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULL")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220216201943.624869-1-memxor@gmail.com
As previously discussed(https://lkml.org/lkml/2022/1/20/51),
cpuset_attach() is affected with similar cpu hotplug race,
as follow scenario:
cpuset_attach() cpu hotplug
--------------------------- ----------------------
down_write(cpuset_rwsem)
guarantee_online_cpus() // (load cpus_attach)
sched_cpu_deactivate
set_cpu_active()
// will change cpu_active_mask
set_cpus_allowed_ptr(cpus_attach)
__set_cpus_allowed_ptr_locked()
// (if the intersection of cpus_attach and
cpu_active_mask is empty, will return -EINVAL)
up_write(cpuset_rwsem)
To avoid races such as described above, protect cpuset_attach() call
with cpu_hotplug_lock.
Fixes: be367d0992 ("cgroups: let ss->can_attach and ss->attach do whole threadgroups at a time")
Cc: stable@vger.kernel.org # v2.6.32+
Reported-by: Zhao Gongyi <zhaogongyi@huawei.com>
Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
- Force HANDLER_EXIT even for SIGNAL_UNKILLABLE.
- Make seccomp self-destruct after fatal filter results.
- Update seccomp samples for easier behavioral demonstration.
-----BEGIN PGP SIGNATURE-----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=zpOl
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fixes from Kees Cook:
"This fixes a corner case of fatal SIGSYS being ignored since v5.15.
Along with the signal fix is a change to seccomp so that seeing
another syscall after a fatal filter result will cause seccomp to kill
the process harder.
Summary:
- Force HANDLER_EXIT even for SIGNAL_UNKILLABLE
- Make seccomp self-destruct after fatal filter results
- Update seccomp samples for easier behavioral demonstration"
* tag 'seccomp-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
samples/seccomp: Adjust sample to also provide kill option
seccomp: Invalidate seccomp mode to catch death failures
signal: HANDLER_EXIT should clear SIGNAL_UNKILLABLE
A kernel exception was hit when trying to dump /proc/lockdep_chains after
lockdep report "BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low!":
Unable to handle kernel paging request at virtual address 00054005450e05c3
...
00054005450e05c3] address between user and kernel address ranges
...
pc : [0xffffffece769b3a8] string+0x50/0x10c
lr : [0xffffffece769ac88] vsnprintf+0x468/0x69c
...
Call trace:
string+0x50/0x10c
vsnprintf+0x468/0x69c
seq_printf+0x8c/0xd8
print_name+0x64/0xf4
lc_show+0xb8/0x128
seq_read_iter+0x3cc/0x5fc
proc_reg_read_iter+0xdc/0x1d4
The cause of the problem is the function lock_chain_get_class() will
shift lock_classes index by 1, but the index don't need to be shifted
anymore since commit 01bb6f0af9 ("locking/lockdep: Change the range
of class_idx in held_lock struct") already change the index to start
from 0.
The lock_classes[-1] located at chain_hlocks array. When printing
lock_classes[-1] after the chain_hlocks entries are modified, the
exception happened.
The output of lockdep_chains are incorrect due to this problem too.
Fixes: f611e8cf98 ("lockdep: Take read/write status in consideration when generate chainkey")
Signed-off-by: Cheng Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20220210105011.21712-1-cheng-jui.wang@mediatek.com
Currently the following code in check_and_init_map_value()
*(struct bpf_timer *)(dst + map->timer_off) =
(struct bpf_timer){};
can help generate bpf_timer definition in vmlinuxBTF.
But the code above may not zero the whole structure
due to anonymour members and that code will be replaced
by memset in the subsequent patch and
bpf_timer definition will disappear from vmlinuxBTF.
Let us emit the type explicitly so bpf program can continue
to use it from vmlinux.h.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220211194948.3141529-1-yhs@fb.com
- Revert a recent change that attempted to avoid issues with
conflicting address ranges during PCI initialization, because it
turned out to introduce a regression (Hans de Goede).
- Revert a change that limited EC GPE wakeups from suspend-to-idle
to systems based on Intel hardware, because it turned out that
systems based on hardware from other vendors depended on that
functionality too (Mario Limonciello).
- Fix two issues related to the handling of wakeup interrupts and
wakeup events signaled through the EC GPE during suspend-to-idle
on x86 (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=aGYp
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These revert two commits that turned out to be problematic and fix two
issues related to wakeup from suspend-to-idle on x86.
Specifics:
- Revert a recent change that attempted to avoid issues with
conflicting address ranges during PCI initialization, because it
turned out to introduce a regression (Hans de Goede).
- Revert a change that limited EC GPE wakeups from suspend-to-idle to
systems based on Intel hardware, because it turned out that systems
based on hardware from other vendors depended on that functionality
too (Mario Limonciello).
- Fix two issues related to the handling of wakeup interrupts and
wakeup events signaled through the EC GPE during suspend-to-idle on
x86 (Rafael Wysocki)"
* tag 'acpi-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/PCI: revert "Ignore E820 reservations for bridge windows on newer systems"
PM: s2idle: ACPI: Fix wakeup interrupts handling
ACPI: PM: s2idle: Cancel wakeup before dispatching EC GPE
ACPI: PM: Revert "Only mark EC GPE for wakeup on Intel systems"
- Fixes to the RTLA tooling.
- A fix to a tp_printk overriding tp_printk_stop_on_boot on command line.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYgWtxxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsaaAQD+4lcpIRKdkfGb09xMlh8Gr8OvRoVb
5XAhzHVpETjGUAEAyIJAG+7Epw/St8FCSupNAEWTzGghjhoJhFblTd17jAg=
=CCON
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fixes to the RTLA tooling
- A fix to a tp_printk overriding tp_printk_stop_on_boot on the
command line
* tag 'trace-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix tp_printk option related with tp_printk_stop_on_boot
MAINTAINERS: Add RTLA entry
rtla: Fix segmentation fault when failing to enable -t
rtla/trace: Error message fixup
rtla/utils: Fix session duration parsing
rtla: Follow kernel version
If seccomp tries to kill a process, it should never see that process
again. To enforce this proactively, switch the mode to something
impossible. If encountered: WARN, reject all syscalls, and attempt to
kill the process again even harder.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Fixes: 8112c4f140 ("seccomp: remove 2-phase API")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Fatal SIGSYS signals (i.e. seccomp RET_KILL_* syscall filter actions)
were not being delivered to ptraced pid namespace init processes. Make
sure the SIGNAL_UNKILLABLE doesn't get set for these cases.
Reported-by: Robert Święcki <robert@swiecki.net>
Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com>
Fixes: 00b06da29c ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/lkml/878rui8u4a.fsf@email.froward.int.ebiederm.org
-----BEGIN PGP SIGNATURE-----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=iaaT
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20220209' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"Another audit fix, this time a single rather small but important fix
for an oops/page-fault caused by improperly accessing userspace
memory"
* tag 'audit-pr-20220209' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: don't deref the syscall args when checking the openat2 open_how::flags
As reported by Jeff, dereferencing the openat2 syscall argument in
audit_match_perm() to obtain the open_how::flags can result in an
oops/page-fault. This patch fixes this by using the open_how struct
that we store in the audit_context with audit_openat2_how().
Independent of this patch, Richard Guy Briggs posted a similar patch
to the audit mailing list roughly 40 minutes after this patch was
posted.
Cc: stable@vger.kernel.org
Fixes: 1c30e3af8a ("audit: add support for the openat2 syscall")
Reported-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The kernel parameter "tp_printk_stop_on_boot" starts with "tp_printk" which is
the same as another kernel parameter "tp_printk". If "tp_printk" setup is
called before the "tp_printk_stop_on_boot", it will override the latter
and keep it from being set.
This is similar to other kernel parameter issues, such as:
Commit 745a600cf1 ("um: console: Ignore console= option")
or init/do_mounts.c:45 (setup function of "ro" kernel param)
Fix it by checking for a "_" right after the "tp_printk" and if that
exists do not process the parameter.
Link: https://lkml.kernel.org/r/20220208195421.969326-1-jsyoo5b@gmail.com
Signed-off-by: JaeSang Yoo <jsyoo5b@gmail.com>
[ Fixed up change log and added space after if condition ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
After commit e3728b50cd ("ACPI: PM: s2idle: Avoid possible race
related to the EC GPE") wakeup interrupts occurring immediately after
the one discarded by acpi_s2idle_wake() may be missed. Moreover, if
the SCI triggers again immediately after the rearming in
acpi_s2idle_wake(), that wakeup may be missed too.
The problem is that pm_system_irq_wakeup() only calls pm_system_wakeup()
when pm_wakeup_irq is 0, but that's not the case any more after the
interrupt causing acpi_s2idle_wake() to run until pm_wakeup_irq is
cleared by the pm_wakeup_clear() call in s2idle_loop(). However,
there may be wakeup interrupts occurring in that time frame and if
that happens, they will be missed.
To address that issue first move the clearing of pm_wakeup_irq to
the point at which it is known that the interrupt causing
acpi_s2idle_wake() to tun will be discarded, before rearming the SCI
for wakeup. Moreover, because that only reduces the size of the
time window in which the issue may manifest itself, allow
pm_system_irq_wakeup() to register two second wakeup interrupts in
a row and, when discarding the first one, replace it with the second
one. [Of course, this assumes that only one wakeup interrupt can be
discarded in one go, but currently that is the case and I am not
aware of any plans to change that.]
Fixes: e3728b50cd ("ACPI: PM: s2idle: Avoid possible race related to the EC GPE")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There's list corruption on cgrp_cpuctx_list. This happens on the
following path:
perf_cgroup_switch: list_for_each_entry(cgrp_cpuctx_list)
cpu_ctx_sched_in
ctx_sched_in
ctx_pinned_sched_in
merge_sched_in
perf_cgroup_event_disable: remove the event from the list
Use list_for_each_entry_safe() to allow removing an entry during
iteration.
Fixes: 058fe1c044 ("perf/core: Make cgroup switch visit only cpuctxs with cgroup events")
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220204004057.2961252-1-song@kernel.org
Syzbot found a GPF in reweight_entity. This has been bisected to
commit 4ef0c5c6b5 ("kernel/sched: Fix sched_fork() access an invalid
sched_task_group")
There is a race between sched_post_fork() and setpriority(PRIO_PGRP)
within a thread group that causes a null-ptr-deref in
reweight_entity() in CFS. The scenario is that the main process spawns
number of new threads, which then call setpriority(PRIO_PGRP, 0, -20),
wait, and exit. For each of the new threads the copy_process() gets
invoked, which adds the new task_struct and calls sched_post_fork()
for it.
In the above scenario there is a possibility that
setpriority(PRIO_PGRP) and set_one_prio() will be called for a thread
in the group that is just being created by copy_process(), and for
which the sched_post_fork() has not been executed yet. This will
trigger a null pointer dereference in reweight_entity(), as it will
try to access the run queue pointer, which hasn't been set.
Before the mentioned change the cfs_rq pointer for the task has been
set in sched_fork(), which is called much earlier in copy_process(),
before the new task is added to the thread_group. Now it is done in
the sched_post_fork(), which is called after that. To fix the issue
the remove the update_load param from the update_load param() function
and call reweight_task() only if the task flag doesn't have the
TASK_NEW flag set.
Fixes: 4ef0c5c6b5 ("kernel/sched: Fix sched_fork() access an invalid sched_task_group")
Reported-by: syzbot+af7a719bc92395ee41b3@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220203161846.1160750-1-tadeusz.struk@linaro.org
- Intel/PT: filters could crash the kernel
- Intel: default disable the PMU for SMM, some new-ish EFI firmware has
started using CPL3 and the PMU CPL filters don't discriminate against
SMM, meaning that CPL3 (userspace only) events now also count EFI/SMM
cycles.
- Fixup for perf_event_attr::sig_data
(Peter Zijlstra)
-----BEGIN PGP SIGNATURE-----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=0tH5
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Intel/PT: filters could crash the kernel
- Intel: default disable the PMU for SMM, some new-ish EFI firmware has
started using CPL3 and the PMU CPL filters don't discriminate against
SMM, meaning that CPL3 (userspace only) events now also count EFI/SMM
cycles.
- Fixup for perf_event_attr::sig_data
* tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/pt: Fix crash with stop filters in single-range mode
perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures
selftests/perf_events: Test modification of perf_event_attr::sig_data
perf: Copy perf_event_attr::sig_data on modification
x86/perf: Default set FREEZE_ON_SMI for all
While the stackleak plugin was already using notrace, objtool is now a
bit more picky. Update the notrace uses to noinstr. Silences the
following objtool warnings when building with:
CONFIG_DEBUG_ENTRY=y
CONFIG_STACK_VALIDATION=y
CONFIG_VMLINUX_VALIDATION=y
CONFIG_GCC_PLUGIN_STACKLEAK=y
vmlinux.o: warning: objtool: do_syscall_64()+0x9: call to stackleak_track_stack() leaves .noinstr.text section
vmlinux.o: warning: objtool: do_int80_syscall_32()+0x9: call to stackleak_track_stack() leaves .noinstr.text section
vmlinux.o: warning: objtool: exc_general_protection()+0x22: call to stackleak_track_stack() leaves .noinstr.text section
vmlinux.o: warning: objtool: fixup_bad_iret()+0x20: call to stackleak_track_stack() leaves .noinstr.text section
vmlinux.o: warning: objtool: do_machine_check()+0x27: call to stackleak_track_stack() leaves .noinstr.text section
vmlinux.o: warning: objtool: .text+0x5346e: call to stackleak_erase() leaves .noinstr.text section
vmlinux.o: warning: objtool: .entry.text+0x143: call to stackleak_erase() leaves .noinstr.text section
vmlinux.o: warning: objtool: .entry.text+0x10eb: call to stackleak_erase() leaves .noinstr.text section
vmlinux.o: warning: objtool: .entry.text+0x17f9: call to stackleak_erase() leaves .noinstr.text section
Note that the plugin's addition of calls to stackleak_track_stack() from
noinstr functions is expected to be safe, as it isn't runtime
instrumentation and is self-contained.
Cc: Alexander Popov <alex.popov@linux.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
and ieee802154.
Current release - regressions:
- Partially revert "net/smc: Add netlink net namespace support",
fix uABI breakage
- netfilter:
- nft_ct: fix use after free when attaching zone template
- nft_byteorder: track register operations
Previous releases - regressions:
- ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback
- phy: qca8081: fix speeds lower than 2.5Gb/s
- sched: fix use-after-free in tc_new_tfilter()
Previous releases - always broken:
- tcp: fix mem under-charging with zerocopy sendmsg()
- tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data()
- neigh: do not trigger immediate probes on NUD_FAILED from
neigh_managed_work, avoid a deadlock
- bpf: use VM_MAP instead of VM_ALLOC for ringbuf, avoid KASAN
false-positives
- netfilter: nft_reject_bridge: fix for missing reply from prerouting
- smc: forward wakeup to smc socket waitqueue after fallback
- ieee802154:
- return meaningful error codes from the netlink helpers
- mcr20a: fix lifs/sifs periods
- at86rf230, ca8210: stop leaking skbs on error paths
- macsec: add missing un-offload call for NETDEV_UNREGISTER of parent
- ax25: add refcount in ax25_dev to avoid UAF bugs
- eth: mlx5e:
- fix SFP module EEPROM query
- fix broken SKB allocation in HW-GRO
- IPsec offload: fix tunnel mode crypto for non-TCP/UDP flows
- eth: amd-xgbe:
- fix skb data length underflow
- ensure reset of the tx_timer_active flag, avoid Tx timeouts
- eth: stmmac: fix runtime pm use in stmmac_dvr_remove()
- eth: e1000e: handshake with CSME starts from Alder Lake platforms
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=qKvf
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, netfilter, and ieee802154.
Current release - regressions:
- Partially revert "net/smc: Add netlink net namespace support", fix
uABI breakage
- netfilter:
- nft_ct: fix use after free when attaching zone template
- nft_byteorder: track register operations
Previous releases - regressions:
- ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback
- phy: qca8081: fix speeds lower than 2.5Gb/s
- sched: fix use-after-free in tc_new_tfilter()
Previous releases - always broken:
- tcp: fix mem under-charging with zerocopy sendmsg()
- tcp: add missing tcp_skb_can_collapse() test in
tcp_shift_skb_data()
- neigh: do not trigger immediate probes on NUD_FAILED from
neigh_managed_work, avoid a deadlock
- bpf: use VM_MAP instead of VM_ALLOC for ringbuf, avoid KASAN
false-positives
- netfilter: nft_reject_bridge: fix for missing reply from prerouting
- smc: forward wakeup to smc socket waitqueue after fallback
- ieee802154:
- return meaningful error codes from the netlink helpers
- mcr20a: fix lifs/sifs periods
- at86rf230, ca8210: stop leaking skbs on error paths
- macsec: add missing un-offload call for NETDEV_UNREGISTER of parent
- ax25: add refcount in ax25_dev to avoid UAF bugs
- eth: mlx5e:
- fix SFP module EEPROM query
- fix broken SKB allocation in HW-GRO
- IPsec offload: fix tunnel mode crypto for non-TCP/UDP flows
- eth: amd-xgbe:
- fix skb data length underflow
- ensure reset of the tx_timer_active flag, avoid Tx timeouts
- eth: stmmac: fix runtime pm use in stmmac_dvr_remove()
- eth: e1000e: handshake with CSME starts from Alder Lake platforms"
* tag 'net-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
ax25: fix reference count leaks of ax25_dev
net: stmmac: ensure PTP time register reads are consistent
net: ipa: request IPA register values be retained
dt-bindings: net: qcom,ipa: add optional qcom,qmp property
tools/resolve_btfids: Do not print any commands when building silently
bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work
tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data()
net: sparx5: do not refer to skb after passing it on
Partially revert "net/smc: Add netlink net namespace support"
net/mlx5e: Avoid field-overflowing memcpy()
net/mlx5e: Use struct_group() for memcpy() region
net/mlx5e: Avoid implicit modify hdr for decap drop rule
net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP traffic
net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated traffic
net/mlx5e: Don't treat small ceil values as unlimited in HTB offload
net/mlx5: E-Switch, Fix uninitialized variable modact
net/mlx5e: Fix handling of wrong devices during bond netevent
net/mlx5e: Fix broken SKB allocation in HW-GRO
net/mlx5e: Fix wrong calculation of header index in HW_GRO
...
Daniel Borkmann says:
====================
pull-request: bpf 2022-02-03
We've added 6 non-merge commits during the last 10 day(s) which contain
a total of 7 files changed, 11 insertions(+), 236 deletions(-).
The main changes are:
1) Fix BPF ringbuf to allocate its area with VM_MAP instead of VM_ALLOC
flag which otherwise trips over KASAN, from Hou Tao.
2) Fix unresolved symbol warning in resolve_btfids due to LSM callback
rename, from Alexei Starovoitov.
3) Fix a possible race in inc_misses_counter() when IRQ would trigger
during counter update, from He Fengqing.
4) Fix tooling infra for cross-building with clang upon probing whether
gcc provides the standard libraries, from Jean-Philippe Brucker.
5) Fix silent mode build for resolve_btfids, from Nathan Chancellor.
6) Drop unneeded and outdated lirc.h header copy from tooling infra as
BPF does not require it anymore, from Sean Young.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
tools/resolve_btfids: Do not print any commands when building silently
bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
tools: Ignore errors from `which' when searching a GCC toolchain
tools headers UAPI: remove stale lirc.h
bpf: Fix possible race in inc_misses_counter
bpf: Fix renaming task_getsecid_subj->current_getsecid_subj.
====================
Link: https://lore.kernel.org/r/20220203155815.25689-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The move of proc_dointvec_minmax_sysadmin() from kernel/sysctl.c to
kernel/printk/sysctl.c introduced an incorrect __user attribute to the
buffer argument. I spotted this change in [1] as well as the kernel
test robot. Revert this change to please sparse:
kernel/printk/sysctl.c:20:51: warning: incorrect type in argument 3 (different address spaces)
kernel/printk/sysctl.c:20:51: expected void *
kernel/printk/sysctl.c:20:51: got void [noderef] __user *buffer
Fixes: faaa357a55 ("printk: move printk sysctl to printk/sysctl.c")
Link: https://lore.kernel.org/r/20220104155024.48023-2-mic@digikod.net [1]
Reported-by: kernel test robot <lkp@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20220203145029.272640-1-mic@digikod.net
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 774a1221e8.
We need to finish all async code before the module init sequence is
done. In the reverted commit the PF_USED_ASYNC flag was added to mark a
thread that called async_schedule(). Then the PF_USED_ASYNC flag was
used to determine whether or not async_synchronize_full() needs to be
invoked. This works when modprobe thread is calling async_schedule(),
but it does not work if module dispatches init code to a worker thread
which then calls async_schedule().
For example, PCI driver probing is invoked from a worker thread based on
a node where device is attached:
if (cpu < nr_cpu_ids)
error = work_on_cpu(cpu, local_pci_probe, &ddi);
else
error = local_pci_probe(&ddi);
We end up in a situation where a worker thread gets the PF_USED_ASYNC
flag set instead of the modprobe thread. As a result,
async_synchronize_full() is not invoked and modprobe completes without
waiting for the async code to finish.
The issue was discovered while loading the pm80xx driver:
(scsi_mod.scan=async)
modprobe pm80xx worker
...
do_init_module()
...
pci_call_probe()
work_on_cpu(local_pci_probe)
local_pci_probe()
pm8001_pci_probe()
scsi_scan_host()
async_schedule()
worker->flags |= PF_USED_ASYNC;
...
< return from worker >
...
if (current->flags & PF_USED_ASYNC) <--- false
async_synchronize_full();
Commit 21c3c5d280 ("block: don't request module during elevator init")
fixed the deadlock issue which the reverted commit 774a1221e8
("module, async: async_synchronize_full() on module init iff async is
used") tried to fix.
Since commit 0fdff3ec6d ("async, kmod: warn on synchronous
request_module() from async workers") synchronous module loading from
async is not allowed.
Given that the original deadlock issue is fixed and it is no longer
allowed to call synchronous request_module() from async we can remove
PF_USED_ASYNC flag to make module init consistently invoke
async_synchronize_full() unless async module probe is requested.
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Changyuan Lyu <changyuanl@google.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull cgroup fixes from Tejun Heo:
- Eric's fix for a long standing cgroup1 permission issue where it only
checks for uid 0 instead of CAP which inadvertently allows
unprivileged userns roots to modify release_agent userhelper
- Fixes for the fallout from Waiman's recent cpuset work
* 'for-5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning
cgroup-v1: Require capabilities to set release_agent
cpuset: Fix the bug that subpart_cpus updated wrongly in update_cpumask()
cgroup/cpuset: Make child cpusets restrict parents on v1 hierarchy
It was found that a "suspicious RCU usage" lockdep warning was issued
with the rcu_read_lock() call in update_sibling_cpumasks(). It is
because the update_cpumasks_hier() function may sleep. So we have
to release the RCU lock, call update_cpumasks_hier() and reacquire
it afterward.
Also add a percpu_rwsem_assert_held() in update_sibling_cpumasks()
instead of stating that in the comment.
Fixes: 4716909cc5 ("cpuset: Track cpusets that use parent's effective_cpus")
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
After commit 2fd3fb0be1d1 ("kasan, vmalloc: unpoison VM_ALLOC pages
after mapping"), non-VM_ALLOC mappings will be marked as accessible
in __get_vm_area_node() when KASAN is enabled. But now the flag for
ringbuf area is VM_ALLOC, so KASAN will complain out-of-bound access
after vmap() returns. Because the ringbuf area is created by mapping
allocated pages, so use VM_MAP instead.
After the change, info in /proc/vmallocinfo also changes from
[start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmalloc user
to
[start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmap user
Fixes: 457f44363a ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: syzbot+5ad567a418794b9b5983@syzkaller.appspotmail.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220202060158.6260-1-houtao1@huawei.com
The intent has always been that perf_event_attr::sig_data should also be
modifiable along with PERF_EVENT_IOC_MODIFY_ATTRIBUTES, because it is
observable by user space if SIGTRAP on events is requested.
Currently only PERF_TYPE_BREAKPOINT is modifiable, and explicitly copies
relevant breakpoint-related attributes in hw_breakpoint_copy_attr().
This misses copying perf_event_attr::sig_data.
Since sig_data is not specific to PERF_TYPE_BREAKPOINT, introduce a
helper to copy generic event-type-independent attributes on
modification.
Fixes: 97ba62b278 ("perf: Add support for SIGTRAP on perf events")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20220131103407.1971678-1-elver@google.com
-----BEGIN PGP SIGNATURE-----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=sFi4
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20220131' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"A single audit patch to fix problems relating to audit queuing and
system responsiveness when "audit=1" is specified on the kernel
command line and the audit daemon is SIGSTOP'd for an extended period
of time"
* tag 'audit-pr-20220131' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: improve audit queue handling when "audit=1" on cmdline
The cgroup release_agent is called with call_usermodehelper. The function
call_usermodehelper starts the release_agent with a full set fo capabilities.
Therefore require capabilities when setting the release_agaent.
Reported-by: Tabitha Sable <tabitha.c.sable@gmail.com>
Tested-by: Tabitha Sable <tabitha.c.sable@gmail.com>
Fixes: 81a6a5cdd2 ("Task Control Groups: automatic userspace notification of idle cgroups")
Cc: stable@vger.kernel.org # v2.6.24+
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
except the one it belongs to, to avoid list corruption
- Make sure parent events are always woken up to avoid indefinite hangs
in the traced workload
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmH2cukACgkQEsHwGGHe
VUrQZA//WGHM7aNDp9xNkEhSsH6tDZqYSzg8yxzQGrBx3hNuTraj1imHVsCXLeU1
yCS5hBr3LdnhsAL+IaNtgTfOyM7m9SLtvFWTLINY2j7L/DkljagIB3Ur+8No565U
a/gd1UbeW2btRYUidFmXokIXMxMcsHCawX1hf1FKm7tP2b+DvD9uGePyxHmwk9BB
o5HTc1ft6qPt7LFfTxrtXEg76Z8DFovusvaPgISmv5RFnvLLwMnY6CN/oMUP+Fr+
PyCxFatgscEDgiDqRWNYvDyKOBV9dDa72Pab/yFoREM7Pc88sLhy9ZSPaf8ZiJDz
fvqBVl9d93i2UExNSdedC4dq8l3s0ioHOd4soSdBTVkrUxYTPvx31WfNLUigNxws
q7vJulsOUCPApuRvybTBy8A12ksjlT8qNDC3RLYfEKNuNMeYzXiZnijJ98FdVirF
FFv+5pPCzz1dhcsu9rMyuNgFwaIik8ptnt4ffaTsy70mT5h1UmKZsLr3clurRX8v
XpzAVCcJKiDBbc4NdtweQqm2zoY9Uxwhez3+wxmlZXndOPdcYbACKQ65U0bl6OYw
Qir8WZMOzHnlJLItPuH+TMuoJ7TdFwD9Sndiih+sKK7PEfU3XvWIRATvyjCoPINA
FfqX59lLDVBpjapdODVCt7St9e7VKAxPuc9yZIBJOo7K0QRLquE=
=+ssI
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Prevent accesses to the per-CPU cgroup context list from another CPU
except the one it belongs to, to avoid list corruption
- Make sure parent events are always woken up to avoid indefinite hangs
in the traced workload
* tag 'perf_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix cgroup event list management
perf: Always wake the parent event
set when querying membarrier(2) commands through MEMBARRIER_CMD_QUERY
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmH2cDYACgkQEsHwGGHe
VUo7YhAAs4trrOaq5KCr2YW7agAHqYjYsMfPLEBUOvJ4hGggMAYCwGXYDdzMo8UH
tAxLfh2fyy3VUNKPeLMqz6XVn697oTQnSAkVBDJIcMJlctZGvXmwNnv3g133xlML
n4xLhVAfC76HA0Q0zkPZ6gdN/VBrRl94n3mAWxB9FVFUDwFIMr6PkGrjw9Olml/r
Xm2WUuKfvwHqEhNUDu2rS0qqal3mPO6DV+4Y7JGyQL5fYAu3HfabZV4CBfYt5z3P
m3y4Y2yfpWcB4D6KfXHPQwLhWOoxVZ0X2YiAjfj8x/+dYaTIoBSg/EG+44nX6tBV
RcYK9gARwfCgSdcfWZFYYfHlGbNv1x/HHOVvkuJEzfCya4+FQTRdrqkoOWsPUPk1
jqa9Ybz9wQxJ2GI57wT7W+fyl2M+agyvwywrELLy6w6nwAKdWpbIGW4b1ummfIk2
MGqL99Hge6aX9ONFT6IA4rHd0fvWNC00l4evzNVfyHQnYN3f0ul8h8p950F09I25
apSalhyz40LbJdKsRFGt8CjIgM2Y+rP87JI8ZawjauWFIp+lLiXcLOuLXTNJjAe6
Sw9EWkkr3sTHzOxudrFHz/QwM+m7KkoYnuGQw0gDqzXdqc1Gpc91llLqqWNuyX++
y3NWzEdmnjlV+H1Fls94UhrdsHAiI8d+OTH3fQVY6VEtGcLQJ2c=
=kI2Z
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
"Make sure the membarrier-rseq fence commands are part of the reported
set when querying membarrier(2) commands through MEMBARRIER_CMD_QUERY"
* tag 'sched_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/membarrier: Fix membarrier-rseq fence command missing from query bitmask
