commit 8e3ed9e786 upstream.
In BMC environments with concurrent access to multiple registers, certain
registers occasionally yield a value of 0 even after 3 retries due to
hardware errata. As a fix, we have extended the retry count from 3 to 30.
The same errata applies to the mpt3sas driver, and a similar patch has
been accepted. Please find more details in the mpt3sas patch reference
link.
Link: https://lore.kernel.org/r/20230829090020.5417-2-ranjan.kumar@broadcom.com
Fixes: 272652fcbf ("scsi: megaraid_sas: add retry logic in megasas_readl")
Cc: stable@vger.kernel.org
Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20231003110021.168862-2-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c978492c3 upstream.
The retry loop continues to iterate until the count reaches 30, even after
receiving the correct value. Exit loop when a non-zero value is read.
Fixes: 4ca10f3e31 ("scsi: mpt3sas: Perform additional retries if doorbell read returns 0")
Cc: stable@vger.kernel.org
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20231020105849.6350-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4df105f0ce ]
fc_lport_ptp_setup() did not check the return value of fc_rport_create()
which can return NULL and would cause a NULL pointer dereference. Address
this issue by checking return value of fc_rport_create() and log error
message on fc_rport_create() failed.
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Link: https://lore.kernel.org/r/20231011130350.819571-1-haowenchao2@huawei.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b39f2d10b8 ]
In practice the driver should never send more commands than are allocated
to a queue's event pool. In the unlikely event that this happens, the code
asserts a BUG_ON, and in the case that the kernel is not configured to
crash on panic returns a junk event pointer from the empty event list
causing things to spiral from there. This BUG_ON is a historical artifact
of the ibmvfc driver first being upstreamed, and it is well known now that
the use of BUG_ON is bad practice except in the most unrecoverable
scenario. There is nothing about this scenario that prevents the driver
from recovering and carrying on.
Remove the BUG_ON in question from ibmvfc_get_event() and return a NULL
pointer in the case of an empty event pool. Update all call sites to
ibmvfc_get_event() to check for a NULL pointer and perfrom the appropriate
failure or recovery action.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-2-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a75a16c62a ]
utf16s_to_utf8s does not NULL terminate the output string. For us to be
able to add a NULL character when utf16s_to_utf8s returns, we need to make
sure that there is space for such NULL character at the end of the output
buffer. We can achieve this by passing an output buffer size to
utf16s_to_utf8s that is one character less than what we allocated.
Other call sites of utf16s_to_utf8s appear to be using the same technique
where they artificially reduce the buffer size by one to leave space for a
NULL character or line feed character.
Fixes: 4b828fe156 ("scsi: ufs: revamp string descriptor reading")
Reviewed-by: Mars Cheng <marscheng@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Yen-lin Lai <yenlinlai@google.com>
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Link: https://lore.kernel.org/r/20231017182026.2141163-1-danielmentz@google.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 670106eb4c ]
Commit 0217a272fe ("scsi: ibmvfc: Store return code of H_FREE_SUB_CRQ
during cleanup") wrongly changed the busy loop check to use
rtas_busy_delay() instead of H_BUSY and H_IS_LONG_BUSY(). The busy return
codes for RTAS and hypercalls are not the same.
Fix this issue by restoring the use of H_BUSY and H_IS_LONG_BUSY().
Fixes: 0217a272fe ("scsi: ibmvfc: Store return code of H_FREE_SUB_CRQ during cleanup")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-5-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e40c04ade0 ]
The driver should be deregistered as misc driver after PCI registration
failure.
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20231015114529.10725-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a710eacb9d ]
Since the removal of the legacy block layer there is only one completion
function left in the SCSI core, namely scsi_mq_done(). Rename it into
scsi_done(). Export that function to allow SCSI LLDs to call it directly.
Link: https://lore.kernel.org/r/20211007202923.2174984-3-bvanassche@acm.org
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: e193b7955d ("RDMA/srp: Do not call scsi_done() from srp_abort()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf23e61903 ]
Conditional statements are faster than indirect calls. Use a structure
member to track the SCSI command submitter such that later patches can call
scsi_done(scmd) instead of scmd->scsi_done(scmd).
The asymmetric behavior that scsi_send_eh_cmnd() sets the submission
context to the SCSI error handler and that it does not restore the
submission context to the SCSI core is retained.
Link: https://lore.kernel.org/r/20211007202923.2174984-2-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: e193b7955d ("RDMA/srp: Do not call scsi_done() from srp_abort()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d54820b22e ]
When target mode is enabled, the pci_irq_get_affinity() function may return
a NULL value in qla_mapq_init_qp_cpu_map() due to the qla24xx_enable_msix()
code that handles IRQ settings for target mode. This leads to a crash due
to a NULL pointer dereference.
This patch fixes the issue by adding a check for the NULL value returned by
pci_irq_get_affinity() and introducing a 'cpu_mapped' boolean flag to the
qla_qpair structure, ensuring that the qpair's CPU affinity is updated when
it has not been mapped to a CPU.
Fixes: 1d201c81d4 ("scsi: qla2xxx: Select qpair depending on which CPU post_cmd() gets called")
Signed-off-by: Gleb Chesnokov <gleb.chesnokov@scst.dev>
Link: https://lore.kernel.org/r/56b416f2-4e0f-b6cf-d6d5-b7c372e3c6a2@scst.dev
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c13e733174 ]
Tags allocated for OPC_INB_SET_CONTROLLER_CONFIG command need to be freed
when we receive the response.
Signed-off-by: Michal Grzedzicki <mge@meta.com>
Link: https://lore.kernel.org/r/20230911170340.699533-2-mge@meta.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d3f59cf86 ]
__ufshcd_send_uic_cmd() is wrapped by uic_cmd_mutex and its related
contexts are accessed within the section wrapped by uic_cmd_mutex. Thus,
wrapping with host_lock is redundant.
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Link: https://lore.kernel.org/r/782ba5f26f0a96e58d85dff50751787d2d2a6b2b.1693790060.git.kwmad.kim@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chanwoo Lee <cw9316.lee@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7df0b26054 ]
Avoid race condition between I/O completion and abort processing by
protecting the cmd_type with the rport lock.
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Link: https://lore.kernel.org/r/20230901060646.27885-1-skashyap@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d201c81d4 ]
In current I/O path, Tx and Rx may not be processed on same CPU. This may
lead to thrashing and optimum performance may not be achieved.
Pick qpair such that Tx and Rx are processed on same CPU.
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 59f10a05b5 ("scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c91774818b upstream.
The function pm8001_pci_resume() only calls pm8001_request_irq() without
calling pm8001_setup_irq(). This causes the IRQ allocation to fail, which
leads all drives being removed from the system.
Fix this issue by integrating the code for pm8001_setup_irq() directly
inside pm8001_request_irq() so that MSI-X setup is performed both during
normal initialization and resume operations.
Fixes: dbf9bfe615 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230911232745.325149-2-dlemoal@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b0747d507 upstream.
The following processes run into a deadlock. CPU 41 was waiting for CPU 29
to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29
was hung by that spinlock with IRQs disabled.
PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd"
!# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0
!# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0
!# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0
# 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0
# 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0
# 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0
# 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0
# 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0
# 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0
# 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0
#10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0
#11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0
#12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0
#13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0
#14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0
#15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0
#16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0
#17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0
#18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0
#19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0
#20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0
#21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0
#22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0
#23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0
#24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0
#25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0
#26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0
#27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0
PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd"
!# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0
!# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0
# 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0
# 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0
# 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0
# 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0
# 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0
# 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0
# 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0
# 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0
#10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0
#11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0
#12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0
#13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0
#14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0
#15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0
#16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0
#17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0
The lock is used to synchronize different sysfs operations, it doesn't
protect any resource that will be touched by an interrupt. Consequently
it's not required to disable IRQs. Replace the spinlock with a mutex to fix
the deadlock.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7dcc683db3 ]
Since debugfs_create_file() returns ERR_PTR and never NULL, use IS_ERR() to
check the return value.
Fixes: 2fcbc569b9 ("scsi: lpfc: Make debugfs ktime stats generic for NVME and SCSI")
Fixes: 4c47efc140 ("scsi: lpfc: Move SCSI and NVME Stats to hardware queue structures")
Fixes: 6a828b0f61 ("scsi: lpfc: Support non-uniform allocation of MSIX vectors to hardware queues")
Fixes: 95bfc6d8ad ("scsi: lpfc: Make FW logging dynamically configurable")
Fixes: 9f77870870 ("scsi: lpfc: Add debugfs support for cm framework buffers")
Fixes: c490850a09 ("scsi: lpfc: Adapt partitioned XRI lists to efficient sharing")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230906030809.2847970-1-ruanjinjie@huawei.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0b0822e32 ]
Since both debugfs_create_dir() and debugfs_create_file() return ERR_PTR
and never NULL, use IS_ERR() instead of checking for NULL.
Fixes: 1e98fb0f92 ("scsi: qla2xxx: Setup debugfs entries for remote ports")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230831140930.3166359-1-ruanjinjie@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1545e0b419 ]
GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE is all about the event reporting
mechanism, so move it to the event_flags field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 1a721de848 ("block: don't add or resize partition on the disk with GENHD_FL_NO_PART")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e370b64c7d upstream.
The storage was not draining I/Os and the work load was not spread out
across different CPUs evenly. This led to firmware resource counters
getting overrun on the busy CPU. This overrun prevented error recovery from
happening in a timely manner.
By switching the counter to atomic, it allows the count to be little more
accurate to prevent the overrun.
Cc: stable@vger.kernel.org
Fixes: da7c21b72a ("scsi: qla2xxx: Fix command flush during TMF")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230821130045.34850-4-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ba0b018f9 upstream.
TMF was returned with an error code. The error code was not preserved to be
returned to upper layer. Instead, the error code from the Marker was
returned.
Preserve error code from TMF and return it to upper layer.
Cc: stable@vger.kernel.org
Fixes: da7c21b72a ("scsi: qla2xxx: Fix command flush during TMF")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230821130045.34850-6-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d0b65569c upstream.
Fix race condition between Interrupt thread and Chip reset thread in trying
to flush the same mailbox. With the race condition, the "ha->mbx_intr_comp"
will get an extra complete() call. The extra complete call create erroneous
mailbox timeout condition when the next mailbox is sent where the mailbox
call does not wait for interrupt to arrive. Instead, it advances without
waiting.
Add lock protection around the check for mailbox completion.
Cc: stable@vger.kernel.org
Fixes: b2000805a9 ("scsi: qla2xxx: Flush mailbox commands on chip reset")
Signed-off-by: Quinn Tran <quinn.tran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230821130045.34850-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9105c4b7a upstream.
User accidently passed module parameter ql2xenabledif=1 which is
unsupported. However, driver still initialized which lead to guard tag
errors during device discovery.
Remove unsupported ql2xenabledif=1 option and validate the user input.
Cc: stable@vger.kernel.org
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230821130045.34850-7-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d3148d8e8 upstream.
Task management can retry up to 5 times when FW resource becomes bottle
neck. Between the retries, there is a short sleep. Current code assumes
the chip has not reset or session has not changed.
Check for chip reset or session change before sending Task management.
Cc: stable@vger.kernel.org
Fixes: 9803fb5d27 ("scsi: qla2xxx: Fix task management cmd failure")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230714070104.40052-9-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 39d2274071 upstream.
Connection does not resume after a host reset / chip reset. The cause of
the blockage is due to the FCF_ASYNC_ACTIVE left on. The gnl command was
interrupted by the chip reset. On exiting the command, this flag should be
turn off to allow relogin to reoccur. Clear this flag to prevent blockage.
Cc: stable@vger.kernel.org
Fixes: 17e64648aa ("scsi: qla2xxx: Correct fcport flags handling")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230714070104.40052-7-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b51f35d12 upstream.
Link up failure occurred where driver failed to see certain events from FW
indicating link up (AEN 8011) and fabric login completion (AEN 8014).
Without these 2 events, driver would not proceed forward to scan the
fabric. The cause of this is due to delay in the receive of interrupt for
Mailbox 60 that causes qla to set the fw_started flag late. The late
setting of this flag causes other interrupts to be dropped. These dropped
interrupts happen to be the link up (AEN 8011) and fabric login completion
(AEN 8014).
Set fw_started flag early to prevent interrupts being dropped.
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230714070104.40052-6-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da7c21b72a upstream.
For each TMF request, driver iterates through each qpair and flushes
commands associated to the TMF. At the end of the qpair flush, a Marker is
used to complete the flush transaction. This process was repeated for each
qpair. The multiple flush and marker for this TMF request seems to cause
confusion for FW.
Instead, 1 flush is sent to FW. Driver would wait for FW to go through all
the I/Os on each qpair to be read then return. Driver then closes out the
transaction with a Marker.
Cc: stable@vger.kernel.org
Fixes: d90171dd0d ("scsi: qla2xxx: Multi-que support for TMF")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230714070104.40052-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 009e7fe4a1 upstream.
Different behavior were experienced of session being torn down vs not when
TMF is timed out. When FW detects the time out, the session is torn down.
When driver detects the time out, the session is not torn down.
Allow TMF error to return to upper layer without session tear down.
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230714070104.40052-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6dfe4344c1 upstream.
System crash when using debug kernel due to link list corruption. The cause
of the link list corruption is due to session deletion was allowed to queue
up twice. Here's the internal trace that show the same port was allowed to
double queue for deletion on different cpu.
20808683956 015 qla2xxx [0000:13:00.1]-e801:4: Scheduling sess ffff93ebf9306800 for deletion 50:06:0e:80:12:48:ff:50 fc4_type 1
20808683957 027 qla2xxx [0000:13:00.1]-e801:4: Scheduling sess ffff93ebf9306800 for deletion 50:06:0e:80:12:48:ff:50 fc4_type 1
Move the clearing/setting of deleted flag lock.
Cc: stable@vger.kernel.org
Fixes: 726b854870 ("qla2xxx: Add framework for async fabric discovery")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230714070104.40052-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8ec192427 upstream.
Per FW recommendation, 8 TMF's can be outstanding for each
function. Previously, it allowed 8 per target.
Limit TMF to 8 per function.
Cc: stable@vger.kernel.org
Fixes: 6a87679626 ("scsi: qla2xxx: Fix task management cmd fail due to unavailable resource")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230714070104.40052-4-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit efa74a62aa upstream.
During NVMe queue creation, a new qpair is created. FW resource limit needs
to be re-adjusted to take into account the new qpair. Otherwise, NVMe
command can not go through. This issue was discovered while
testing/forcing FW execution to fail at load time.
Add call to readjust IOCB and exchange limit.
In addition, get FW state command and require FW to be running. Otherwise,
error is generated.
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230714070104.40052-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ca10f3e31 upstream.
The driver retries certain register reads 3 times if the returned value is
0. This was done because the controller could return 0 for certain
registers if other registers were being accessed concurrently by the BMC.
In certain systems with increased BMC interactions, the register values
returned can be 0 for longer than 3 retries. Change the retry count from 3
to 30 for the affected registers to prevent problems with out-of-band
management.
Fixes: b899202901 ("scsi: mpt3sas: Add separate function for aero doorbell reads")
Cc: stable@vger.kernel.org
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20230829090020.5417-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1a19755519 ]
There is a long call chain that &fip->ctlr_lock is acquired by isr
fnic_isr_msix_wq_copy() under hard IRQ context. Thus other process context
code acquiring the lock should disable IRQ, otherwise deadlock could happen
if the IRQ preempts the execution while the lock is held in process context
on the same CPU.
[ISR]
fnic_isr_msix_wq_copy()
-> fnic_wq_copy_cmpl_handler()
-> fnic_fcpio_cmpl_handler()
-> fnic_fcpio_flogi_reg_cmpl_handler()
-> fnic_flush_tx()
-> fnic_send_frame()
-> fcoe_ctlr_els_send()
-> spin_lock_bh(&fip->ctlr_lock)
[Process Context]
1. fcoe_ctlr_timer_work()
-> fcoe_ctlr_flogi_send()
-> spin_lock_bh(&fip->ctlr_lock)
2. fcoe_ctlr_recv_work()
-> fcoe_ctlr_recv_handler()
-> fcoe_ctlr_recv_els()
-> fcoe_ctlr_announce()
-> spin_lock_bh(&fip->ctlr_lock)
3. fcoe_ctlr_recv_work()
-> fcoe_ctlr_recv_handler()
-> fcoe_ctlr_recv_els()
-> fcoe_ctlr_flogi_retry()
-> spin_lock_bh(&fip->ctlr_lock)
4. -> fcoe_xmit()
-> fcoe_ctlr_els_send()
-> spin_lock_bh(&fip->ctlr_lock)
spin_lock_bh() is not enough since fnic_isr_msix_wq_copy() is a
hardirq.
These flaws were found by an experimental static analysis tool I am
developing for irq-related deadlock.
The patch fix the potential deadlocks by spin_lock_irqsave() to disable
hard irq.
Fixes: 794d98e77f ("[SCSI] libfcoe: retry rejected FLOGI to another FCF if possible")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Link: https://lore.kernel.org/r/20230817074708.7509-1-dg573847474@gmail.com
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62ec209209 ]
Change scsi_host_lookup() hostnum argument type from unsigned short to
unsigned int to match the type used everywhere else.
Fixes: 6d49f63b41 ("[SCSI] Make host_no an unsigned int")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://lore.kernel.org/r/a02497e7-c12b-ef15-47fc-3f0a0b00ffce@cybernetics.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31b5991a9a ]
The qedf_dbg_debug_cmd_read() function invokes sprintf() directly on a
__user pointer, which may crash the kernel.
Avoid doing that by using a small on-stack buffer for scnprintf() and then
calling simple_read_from_buffer() which does a proper copy_to_user() call.
Fixes: 61d8658b4a ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Link: https://lore.kernel.org/lkml/20230724120241.40495-1-oleksandr@redhat.com/
Link: https://lore.kernel.org/linux-scsi/20230726101236.11922-1-skashyap@marvell.com/
Cc: Saurav Kashyap <skashyap@marvell.com>
Cc: Rob Evers <revers@redhat.com>
Cc: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Jozef Bacik <jobacik@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Oleksandr Natalenko <oleksandr@redhat.com>
Link: https://lore.kernel.org/r/20230731084034.37021-3-oleksandr@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d3d20dee4 ]
The qedf_dbg_stop_io_on_error_cmd_read() function invokes sprintf()
directly on a __user pointer, which may crash the kernel.
Avoid doing that by using a small on-stack buffer for scnprintf() and then
calling simple_read_from_buffer() which does a proper copy_to_user() call.
Fixes: 61d8658b4a ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Link: https://lore.kernel.org/lkml/20230724120241.40495-1-oleksandr@redhat.com/
Link: https://lore.kernel.org/linux-scsi/20230726101236.11922-1-skashyap@marvell.com/
Cc: Saurav Kashyap <skashyap@marvell.com>
Cc: Rob Evers <revers@redhat.com>
Cc: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Jozef Bacik <jobacik@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Oleksandr Natalenko <oleksandr@redhat.com>
Link: https://lore.kernel.org/r/20230731084034.37021-2-oleksandr@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47cd3770e3 ]
There are three places that qla4xxx parses nlattrs:
- qla4xxx_set_chap_entry()
- qla4xxx_iface_set_param()
- qla4xxx_sysfs_ddb_set_param()
and each of them directly converts the nlattr to specific pointer of
structure without length checking. This could be dangerous as those
attributes are not validated and a malformed nlattr (e.g., length 0) could
result in an OOB read that leaks heap dirty data.
Add the nla_len check before accessing the nlattr data and return EINVAL if
the length check fails.
Fixes: 26ffd7b45f ("[SCSI] qla4xxx: Add support to set CHAP entries")
Fixes: 1e9e2be3ee ("[SCSI] qla4xxx: Add flash node mgmt support")
Fixes: 00c31889f7 ("[SCSI] qla4xxx: fix data alignment and use nl helpers")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230723080053.3714534-1-linma@zju.edu.cn
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee0268f230 ]
beiscsi_iface_set_param() parses nlattr with nla_for_each_attr and assumes
every attributes can be viewed as struct iscsi_iface_param_info.
This is not true because there is no any nla_policy to validate the
attributes passed from the upper function iscsi_set_iface_params().
Add the nla_len check before accessing the nlattr data and return EINVAL if
the length check fails.
Fixes: 0e43895ec1 ("[SCSI] be2iscsi: adding functionality to change network settings using iscsiadm")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230723075938.3713864-1-linma@zju.edu.cn
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce51c81700 ]
The functions iscsi_if_set_param() and iscsi_if_set_host_param() convert an
nlattr payload to type char* and then call C string handling functions like
sscanf and kstrdup:
char *data = (char*)ev + sizeof(*ev);
...
sscanf(data, "%d", &value);
However, since the nlattr is provided by the user-space program and the
nlmsg skb is allocated with GFP_KERNEL instead of GFP_ZERO flag (see
netlink_alloc_large_skb() in netlink_sendmsg()), dirty data on the heap can
lead to an OOB access for those string handling functions.
By investigating how the bug is introduced, we find it is really
interesting as the old version parsing code starting from commit
fd7255f51a ("[SCSI] iscsi: add sysfs attrs for uspace sync up") treated
the nlattr as integer bytes instead of string and had length check in
iscsi_copy_param():
if (ev->u.set_param.len != sizeof(uint32_t))
BUG();
But, since the commit a54a52caad ("[SCSI] iscsi: fixup set/get param
functions"), the code treated the nlattr as C string while forgetting to
add any strlen checks(), opening the possibility of an OOB access.
Fix the potential OOB by adding the strlen() check before accessing the
buf. If the data passes this check, all low-level set_param handlers can
safely treat this buf as legal C string.
Fixes: fd7255f51a ("[SCSI] iscsi: add sysfs attrs for uspace sync up")
Fixes: 1d9bf13a9c ("[SCSI] iscsi class: add iscsi host set param event")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230723075820.3713119-1-linma@zju.edu.cn
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 971dfcb74a ]
The current NETLINK_ISCSI netlink parsing loop checks every nlmsg to make
sure the length is bigger than sizeof(struct iscsi_uevent) and then calls
iscsi_if_recv_msg().
nlh = nlmsg_hdr(skb);
if (nlh->nlmsg_len < sizeof(*nlh) + sizeof(*ev) ||
skb->len < nlh->nlmsg_len) {
break;
}
...
err = iscsi_if_recv_msg(skb, nlh, &group);
Hence, in iscsi_if_recv_msg() the nlmsg_data can be safely converted to
iscsi_uevent as the length is already checked.
However, in other cases the length of nlattr payload is not checked before
the payload is converted to other data structures. One example is
iscsi_set_path() which converts the payload to type iscsi_path without any
checks:
params = (struct iscsi_path *)((char *)ev + sizeof(*ev));
Whereas iscsi_if_transport_conn() correctly checks the pdu_len:
pdu_len = nlh->nlmsg_len - sizeof(*nlh) - sizeof(*ev);
if ((ev->u.send_pdu.hdr_size > pdu_len) ..
err = -EINVAL;
To sum up, some code paths called in iscsi_if_recv_msg() do not check the
length of the data (see below picture) and directly convert the data to
another data structure. This could result in an out-of-bound reads and heap
dirty data leakage.
_________ nlmsg_len(nlh) _______________
/ \
+----------+--------------+---------------------------+
| nlmsghdr | iscsi_uevent | data |
+----------+--------------+---------------------------+
\ /
iscsi_uevent->u.set_param.len
Fix the issue by adding the length check before accessing it. To clean up
the code, an additional parameter named rlen is added. The rlen is
calculated at the beginning of iscsi_if_recv_msg() which avoids duplicated
calculation.
Fixes: ac20c7bf07 ("[SCSI] iscsi_transport: Added Ping support")
Fixes: 43514774ff ("[SCSI] iscsi class: Add new NETLINK_ISCSI messages for cnic/bnx2i driver.")
Fixes: 1d9bf13a9c ("[SCSI] iscsi class: add iscsi host set param event")
Fixes: 01cb225dad ("[SCSI] iscsi: add target discvery event to transport class")
Fixes: 264faaaa12 ("[SCSI] iscsi: add transport end point callbacks")
Fixes: fd7255f51a ("[SCSI] iscsi: add sysfs attrs for uspace sync up")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230725024529.428311-1-linma@zju.edu.cn
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c26a2d7c9 ]
There are two iscsi_set_param() functions defined in libiscsi.c and
scsi_transport_iscsi.c respectively which is confusing.
Rename the one in scsi_transport_iscsi.c to iscsi_if_set_param().
Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
Link: https://lore.kernel.org/r/20221122181105.4123935-1-haowenchao@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 971dfcb74a ("scsi: iscsi: Add length check for nlattr payload")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5393a5602 ]
The PIO read command has no response frame and the struct iu[1024] won't be
filled. I/Os which are normally completed will be treated as failed in
sas_ata_task_done() when iu contains abnormal dirty data.
Consequently ending_fis should not be filled by iu when the response frame
hasn't been written to memory.
Fixes: d380f55503 ("scsi: hisi_sas: Don't bother clearing status buffer IU in task prep")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1689045300-44318-2-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
