The zero-copy changes are relatively significant, but regression risk
should be contained. The feature needs to be used to cause trouble.
The new code did trigger a PowerPC64 bug with GCC 14:
https://lore.kernel.org/netdev/20240913125302.0a06b4c7@canb.auug.org.au/
a fix for which Michael will bring via his tree:
https://lore.kernel.org/all/87jzffq9ge.fsf@mail.lhotse/
Unideal, not sure if you'll be willing to pull without that fix but
since we caught this recently I figured we'll defer to you during
the MW instead of trying to fix it cross-tree.
Also it feels like we got an order of magnitude more semi-automated
"refactoring" chaff than usual, I wonder if it's just us.
Core & protocols
----------------
- Support Device Memory TCP, ability to zero-copy receive TCP payloads
to a DMABUF region of memory while packet headers land separately
in normal kernel buffers, and TCP processes then as usual.
- The ability to read the PTP PHC (Physical Hardware Clock) alongside
MONOTONIC_RAW timestamps with PTP_SYS_OFFSET_EXTENDED. Previously
only CLOCK_REALTIME was supported.
- Allow matching on all bits of IP DSCP for routing decisions.
Previously we only supported on matching TOS bits in IPv4 which
is a narrower interpretation of the same header field.
- Increase the range of weights used for multi-path routing from
8 bits to 16 bits.
- Add support for IPv6 PIO p flag in the Prefix Information Option
per draft-ietf-6man-pio-pflag.
- IPv6 IOAM6 support for new tunsrc encap mode for better performance.
- Detect destinations which blackhole MPTCP traffic and avoid initiating
MPTCP connections to them for a certain period of time, 1h by default.
- Improve IPsec control path performance by removing the inexact
policies list.
- AF_VSOCK: add support for SIOCOUTQ ioctl.
- Add enum for reasons TCP reset was sent for easier tracing.
- Add SMC ringbufs usage statistics.
Drivers
-------
- Handle netconsole setup failures more gracefully, don't fail loading,
retain the specified target as disabled.
- Extend bonding's IPsec offload pass thru capabilities (ESN, stats).
Filtering
---------
- Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_*sockopt() to address the case
when long-lived sockets miss a chance to set additional callbacks
if a sockops program was not attached early in their lifetime.
- Support using BPF skb helpers in tracepoints.
- Conntrack Netlink: support CTA_FILTER for flush.
- Improve SCTP support in nfnetlink_queue.
- Improve performance of large nftables flush transactions.
Things we sprinkled into general kernel code
--------------------------------------------
- selftests: support setting an "interpreter" for script files;
make it easy to run as separate cases tests where one "interpreter"
is fed various test descriptions (in our case packet sequences).
Driver API
----------
- Extend core and ethtool APIs to support many PHYs connected to a single
interface (PHY topologies).
- Extend cable diagnostics to specify whether Time Domain Reflectometry
(TDR) or Active Link Cable Diagnostic (ALCD) was used.
- Add library for implementing MAC-PHY Ethernet drivers for SPI devices
compatible with Open Alliance 10BASE-T1x MAC-PHY Serial Interface (TC6)
standard.
- Add helpers to the PHY framework, for PHYs following the Open Alliance
standards:
- 1000BaseT1 link settings
- cable test and diagnostics
- Support listing / dumping all allocated RSS contexts.
- Add configuration for frequency Embedded SYNC in DPLL, which magically
embeds sync pulses into Ethernet signaling.
Device drivers
--------------
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- use better FW APIs for queue reset
- support QOS and TPID settings for the SR-IOV VLAN
- support dynamic MSI-X allocation
- Intel (100G, ice, idpf):
- ice: support PCIe subfunctions
- iavf: add support for TC U32 filters on VFs
- ice: support Embedded SYNC in DPLL
- nVidia/Mellanox (mlx5):
- support HW managed steering tables
- support PCIe PTM cross timestamping
- AMD/Pensando:
- ionic: use page_pool to increase Rx performance
- Cisco (enic):
- report per-queue statistics
- Ethernet virtual:
- Microsoft vNIC:
- mana: support configuring ring length
- netvsc: enable more channels on systems with many CPUs
- IBM veth:
- optimize polling to improve TCP_RR performance
- optimize performance of Tx handling
- VirtIO net:
- synchronize the operstate with the admin state to allow a lower
virtio-net to propagate the link status to an upper device like
macvlan
- Ethernet NICs consumer, and embedded:
- Add driver for Realtek automotive PCIe devices (RTL9054, RTL9068,
RTL9072, RTL9075, RTL9068, RTL9071)
- Add driver for Microchip LAN8650/1 10BASE-T1S MAC-PHY.
- Microchip:
- lan743x: use phylink - support WOL, EEE, pause, link settings
- add Wake-on-LAN support for KSZ87xx family
- add KSZ8895/KSZ8864 switch support
- factor out FDMA code and use it in sparx5 and lan966x
(including DCB support in both)
- Synopsys (stmmac):
- support frame preemption (configured using TC and ethtool)
- support Loongson DWMAC (GMAC v3.73)
- support RockChips RK3576 DWMAC
- TI:
- am65-cpsw: add multi queue RX support
- icssg-prueth: HSR offload support
- Cadence (macb):
- enable software (hrtimer based) IRQ coalescing by default
- Xilinx (axinet):
- expose HW statistics
- improve multicast filtering
- relax Rx checksum offload constraints
- MediaTek:
- mt7530: add EN7581 support
- Aspeed (ftgmac100):
- report link speed and duplex
- Intel:
- igc: add mqprio offload
- igc: report EEE configuration
- RealTek (r8169):
- add support for RTL8126A rev.b
- Vitesse (vsc73xx):
- implement FDB add/del/dump operations
- Freescale (fs_enet):
- use phylink
- Ethernet PHYs:
- vitesse: implement downshift and MDI-X in vsc73xx PHYs
- microchip: support LAN887x, supporting IEEE 802.3bw (100BASE-T1)
and IEEE 802.3bp (1000BASE-T1) specifications
- add Applied Micro QT2025 PHY driver (in Rust)
- add Motorcomm yt8821 2.5G Ethernet PHY driver
- CAN:
- add driver for Rockchip RK3568 CAN-FD controller
- flexcan: add wakeup support for imx95
- kvaser_usb: set hardware timestamp on transmitted packets
- WiFi:
- mac80211/cfg80211:
- EHT rate support in AQL airtime fairness
- handle DFS (radar detection) per link in Multi-Link Operation
- RealTek (rtw89):
- support RTL8852BT and 8852BE-VT (WiFi 6)
- support hardware rfkill
- support HW encryption in unicast management frames
- support Wake-on-WLAN with supported network detection
- RealTek (rtw89):
- improve Rx performance by using USB frame aggregation
- support USB 3 with RTL8822CU/RTL8822BU
- Intel (iwlwifi/mvm):
- offload RLC/SMPS functionality to firmware
- Marvell (mwifiex):
- add host based MLME to enable WPA3
- Bluetooth:
- add support for Amlogic HCI UART protocol
- add support for ISO data/packets to Intel and NXP drivers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ZEaS
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The zero-copy changes are relatively significant, but regression risk
should be contained. The feature needs to be used to cause trouble.
Also it feels like we got an order of magnitude more semi-automated
"refactoring" chaff than usual, I wonder if it's just us.
Core & protocols:
- Support Device Memory TCP, ability to zero-copy receive TCP
payloads to a DMABUF region of memory while packet headers land
separately in normal kernel buffers, and TCP processes then as
usual.
- The ability to read the PTP PHC (Physical Hardware Clock) alongside
MONOTONIC_RAW timestamps with PTP_SYS_OFFSET_EXTENDED. Previously
only CLOCK_REALTIME was supported.
- Allow matching on all bits of IP DSCP for routing decisions.
Previously we only supported on matching TOS bits in IPv4 which is
a narrower interpretation of the same header field.
- Increase the range of weights used for multi-path routing from
8 bits to 16 bits.
- Add support for IPv6 PIO p flag in the Prefix Information Option
per draft-ietf-6man-pio-pflag.
- IPv6 IOAM6 support for new tunsrc encap mode for better
performance.
- Detect destinations which blackhole MPTCP traffic and avoid
initiating MPTCP connections to them for a certain period of time,
1h by default.
- Improve IPsec control path performance by removing the inexact
policies list.
- AF_VSOCK: add support for SIOCOUTQ ioctl.
- Add enum for reasons TCP reset was sent for easier tracing.
- Add SMC ringbufs usage statistics.
Drivers:
- Handle netconsole setup failures more gracefully, don't fail
loading, retain the specified target as disabled.
- Extend bonding's IPsec offload pass thru capabilities (ESN, stats).
Filtering:
- Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_*sockopt() to address the case
when long-lived sockets miss a chance to set additional callbacks
if a sockops program was not attached early in their lifetime.
- Support using BPF skb helpers in tracepoints.
- Conntrack Netlink: support CTA_FILTER for flush.
- Improve SCTP support in nfnetlink_queue.
- Improve performance of large nftables flush transactions.
Things we sprinkled into general kernel code:
- selftests: support setting an "interpreter" for script files; make
it easy to run as separate cases tests where one "interpreter" is
fed various test descriptions (in our case packet sequences).
Driver API:
- Extend core and ethtool APIs to support many PHYs connected to a
single interface (PHY topologies).
- Extend cable diagnostics to specify whether Time Domain
Reflectometry (TDR) or Active Link Cable Diagnostic (ALCD) was
used.
- Add library for implementing MAC-PHY Ethernet drivers for SPI
devices compatible with Open Alliance 10BASE-T1x MAC-PHY Serial
Interface (TC6) standard.
- Add helpers to the PHY framework, for PHYs following the Open
Alliance standards:
- 1000BaseT1 link settings
- cable test and diagnostics
- Support listing / dumping all allocated RSS contexts.
- Add configuration for frequency Embedded SYNC in DPLL, which
magically embeds sync pulses into Ethernet signaling.
Device drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- use better FW APIs for queue reset
- support QOS and TPID settings for the SR-IOV VLAN
- support dynamic MSI-X allocation
- Intel (100G, ice, idpf):
- ice: support PCIe subfunctions
- iavf: add support for TC U32 filters on VFs
- ice: support Embedded SYNC in DPLL
- nVidia/Mellanox (mlx5):
- support HW managed steering tables
- support PCIe PTM cross timestamping
- AMD/Pensando:
- ionic: use page_pool to increase Rx performance
- Cisco (enic):
- report per-queue statistics
- Ethernet virtual:
- Microsoft vNIC:
- mana: support configuring ring length
- netvsc: enable more channels on systems with many CPUs
- IBM veth:
- optimize polling to improve TCP_RR performance
- optimize performance of Tx handling
- VirtIO net:
- synchronize the operstate with the admin state to allow a
lower virtio-net to propagate the link status to an upper
device like macvlan
- Ethernet NICs consumer, and embedded:
- Add driver for Realtek automotive PCIe devices (RTL9054,
RTL9068, RTL9072, RTL9075, RTL9068, RTL9071)
- Add driver for Microchip LAN8650/1 10BASE-T1S MAC-PHY.
- Microchip:
- lan743x: use phylink - support WOL, EEE, pause, link settings
- add Wake-on-LAN support for KSZ87xx family
- add KSZ8895/KSZ8864 switch support
- factor out FDMA code and use it in sparx5 and lan966x
(including DCB support in both)
- Synopsys (stmmac):
- support frame preemption (configured using TC and ethtool)
- support Loongson DWMAC (GMAC v3.73)
- support RockChips RK3576 DWMAC
- TI:
- am65-cpsw: add multi queue RX support
- icssg-prueth: HSR offload support
- Cadence (macb):
- enable software (hrtimer based) IRQ coalescing by default
- Xilinx (axinet):
- expose HW statistics
- improve multicast filtering
- relax Rx checksum offload constraints
- MediaTek:
- mt7530: add EN7581 support
- Aspeed (ftgmac100):
- report link speed and duplex
- Intel:
- igc: add mqprio offload
- igc: report EEE configuration
- RealTek (r8169):
- add support for RTL8126A rev.b
- Vitesse (vsc73xx):
- implement FDB add/del/dump operations
- Freescale (fs_enet):
- use phylink
- Ethernet PHYs:
- vitesse: implement downshift and MDI-X in vsc73xx PHYs
- microchip: support LAN887x, supporting IEEE 802.3bw (100BASE-T1)
and IEEE 802.3bp (1000BASE-T1) specifications
- add Applied Micro QT2025 PHY driver (in Rust)
- add Motorcomm yt8821 2.5G Ethernet PHY driver
- CAN:
- add driver for Rockchip RK3568 CAN-FD controller
- flexcan: add wakeup support for imx95
- kvaser_usb: set hardware timestamp on transmitted packets
- WiFi:
- mac80211/cfg80211:
- EHT rate support in AQL airtime fairness
- handle DFS (radar detection) per link in Multi-Link Operation
- RealTek (rtw89):
- support RTL8852BT and 8852BE-VT (WiFi 6)
- support hardware rfkill
- support HW encryption in unicast management frames
- support Wake-on-WLAN with supported network detection
- RealTek (rtw89):
- improve Rx performance by using USB frame aggregation
- support USB 3 with RTL8822CU/RTL8822BU
- Intel (iwlwifi/mvm):
- offload RLC/SMPS functionality to firmware
- Marvell (mwifiex):
- add host based MLME to enable WPA3
- Bluetooth:
- add support for Amlogic HCI UART protocol
- add support for ISO data/packets to Intel and NXP drivers"
* tag 'net-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1303 commits)
net/mlx5: HWS, check the correct variable in hws_send_ring_alloc_sq()
netfilter: nft_socket: Fix a NULL vs IS_ERR() bug in nft_socket_cgroup_subtree_level()
ice: Fix a NULL vs IS_ERR() check in probe()
ice: Fix a couple NULL vs IS_ERR() bugs
net: ethernet: fs_enet: Make the per clock optional
net: ti: icssg-prueth: Add multicast filtering support in HSR mode
net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload
net: ti: icssg-prueth: Add support for HSR frame forward offload
net: ti: icssg-prueth: Stop hardcoding def_inc
net: ti: icss-iep: Move icss_iep structure
net: ibm: emac: get rid of wol_irq
net: ibm: emac: remove all waiting code
net: ibm: emac: replace of_get_property
net: ibm: emac: use netdev's phydev directly
net: ibm: emac: use devm for register_netdev
net: ibm: emac: remove mii_bus with devm
net: ibm: emac: use devm for of_iomap
net: ibm: emac: manage emac_irq with devm
net: ibm: emac: use devm for alloc_etherdev
octeontx2-af: debugfs: Add Channel info to RPM map
...
list_head can be initialized automatically with LIST_HEAD()
instead of calling INIT_LIST_HEAD(). No functional impact.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SFU since its (first) version 3.0 supports AF_LOCAL sockets and stores them
on filesytem as system file with one zero byte. Add support for detecting
this SFU socket type into cifs_sfu_type() function.
With this change cifs_sfu_type() would correctly detect all special file
types created by SFU: fifo, socket, symlink, block and char.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
For debugging purposes it is a good idea to show detected SFU type also for
Fifo. Debug message is already print for all other special types.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SFU types IntxCHR and IntxBLK are 8 bytes with zero as last byte. Make it
explicit in memcpy and memset calls, so the zero byte is visible in the
code (and not hidden as string trailing nul byte).
It is important for reader to show the last byte for block and char types
because it differs from the last byte of symlink type (which has it 0x01).
Also it is important to show that the type is not nul-term string, but
rather 8 bytes (with some printable bytes).
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently when sfu mount option is specified then CIFS can recognize SFU
symlink, but is not able to read symlink target location. readlink()
syscall just returns that operation is not supported.
Implement this missing functionality in cifs_sfu_type() function. Read
target location of SFU-style symlink, parse it and fill into fattr's
cf_symlink_target member.
SFU-style symlink is file which has system attribute set and file content
is buffer "IntxLNK\1" (8th byte is 0x01) followed by the target location
encoded in little endian UCS-2/UTF-16. This format was introduced in
Interix 3.0 subsystem, as part of the Microsoft SFU 3.0 and is used also by
all later versions. Previous versions had no symlink support.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SFU symlinks have 8 byte prefix: "IntxLNK\1".
So check also the last 8th byte 0x01.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Using uninitialized value "bkt" when calling "kfree"
Fixes: 13b68d4499 ("smb: client: compress: LZ77 code improvements cleanup")
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The dst pointer may not be initialized when calling kvfree(dst)
Fixes: 13b68d4499 ("smb: client: compress: LZ77 code improvements cleanup")
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
- Check data compressibility with some heuristics (copied from
btrfs):
- should_compress() final decision is is_compressible(data)
- Cleanup compress/lz77.h leaving only lz77_compress() exposed:
- Move parts to compress/lz77.c, while removing the rest of it
because they were either unused, used only once, were
implemented wrong (thanks to David Howells for the help)
- Updated the compression parameters (still compatible with
Windows implementation) trading off ~20% compression ratio
for ~40% performance:
- min match len: 3 -> 4
- max distance: 8KiB -> 1KiB
- hash table type: u32 * -> u64 *
Known bugs:
This implementation currently works fine in general, but breaks with
some payloads used during testing. Investigation ongoing, to be
fixed in a next commit.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Co-developed-by: David Howells <dhowells@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
On smb2_async_writev(), set CIFS_COMPRESS_REQ on request flags if
should_compress() returns true.
On smb_send_rqst() check the flags, and compress and send the request to
the server.
(*) If the compression fails with -EMSGSIZE (i.e. compressed size is >=
uncompressed size), the original uncompressed request is sent instead.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Move SMB3.1.1 compression code into experimental config option,
and fix the compress mount option. Implement unchained LZ77
"plain" compression algorithm as per MS-XCA specification
section "2.3 Plain LZ77 Compression Algorithm Details".
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
The cifs_dir_open() have been removed since
commit 737b758c96 ("[PATCH] cifs: character mapping of special
characters (part 3 of 3)"), and now it is useless, so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use the min() macro to simplify the function and improve
its readability.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use ERR_CAST() as it is designed for casting an error pointer to
another type.
This macro uses the __force and __must_check modifiers, which are used
to tell the compiler to check for errors where this macro is used.
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Explained why the typo was not corrected.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
There are only 4 different definitions between the client and server:
- STATUS_SERVER_UNAVAILABLE: from client/smb2status.h
- STATUS_FILE_NOT_AVAILABLE: from client/smb2status.h
- STATUS_NO_PREAUTH_INTEGRITY_HASH_OVERLAP: from server/smbstatus.h
- STATUS_INVALID_LOCK_RANGE: from server/smbstatus.h
Rename client/smb2status.h to common/smb2status.h, and merge the
2 different definitions of server to common header file.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In order to maintain the code more easily, move duplicate definitions
to new common header file.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Preparation for moving acl definitions to new common header file.
Use the following shell command to rename:
find fs/smb/client -type f -exec sed -i \
's/struct cifs_ace/struct smb_ace/g' {} +
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Preparation for moving acl definitions to new common header file.
Use the following shell command to rename:
find fs/smb/client -type f -exec sed -i \
's/struct cifs_acl/struct smb_acl/g' {} +
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Preparation for moving acl definitions to new common header file.
Use the following shell command to rename:
find fs/smb/client -type f -exec sed -i \
's/struct cifs_sid/struct smb_sid/g' {} +
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Preparation for moving acl definitions to new common header file.
Use the following shell command to rename:
find fs/smb/client -type f -exec sed -i \
's/struct cifs_ntsd/struct smb_ntsd/g' {} +
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is a copy and paste bug so this code checks "sq->dep_wqe" where
"sq->wr_priv" was intended. It could result in a NULL pointer
dereference.
Fixes: 2ca62599aa ("net/mlx5: HWS, added send engine and context handling")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/da822315-02b7-4f5b-9c86-0d5176c5069d@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cgroup_get_from_path() function never returns NULL, it returns error
pointers. Update the error handling to match.
Fixes: 7f3287db65 ("netfilter: nft_socket: make cgroupsv2 matching work with namespaces")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Florian Westphal <fw@strlen.de>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/bbc0c4e0-05cc-4f44-8797-2f4b3920a820@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice_allocate_sf() function returns error pointers on error. It
doesn't return NULL. Update the check to match.
Fixes: 177ef7f1e2 ("ice: base subfunction aux driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/6951d217-ac06-4482-a35d-15d757fd90a3@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice_repr_create() function returns error pointers. It never returns
NULL. Fix the callers to check for IS_ERR().
Fixes: 977514fb0f ("ice: create port representor for SF")
Fixes: 415db8399d ("ice: make representor code generic")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/7f7aeb91-8771-47b8-9275-9d9f64f947dd@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some platforms that use fs_enet don't have the PER register clock. This
optional dependency on the clock was incorrectly made mandatory when
switching to devm_ accessors.
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Closes: https://lore.kernel.org/netdev/4e4defa9-ef2f-4ff1-95ca-6627c24db20c@wanadoo.fr/
Fixes: c614acf6e8 ("net: ethernet: fs_enet: simplify clock handling with devm accessors")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/20240914081821.209130-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The use of for_each_child_of_node_scoped() has been spread into the
subsystem drivers. Aside from that, a couple of exit path have been
fixed (mtk, denali), the TI GPMC bindings have been enhanced to comply
with up-to-date partition descriptions and as always there is a load of
small and misc fixes.
* SPI-NAND changes
The most impacting series this cycle is bringing support for continuous
reads in the SPI-NAND subsystem. This is a feature already merged in the
raw NAND subsystem which allows optimizing the internal fetch times in
the chip while reading sequential pages within an eraseblock. For now
only Macronix NANDs benefit from this feature. While we are talking
about Macronix, some of their chip need an explicit action for selecting
a different plane, and support for it has also been brought.
The bitflip threshold has also been set to the same arbitrary level as
in the raw NAND subsystem to optimize wear leveling decisions, and
finally support for a new Winbond chip has been added.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmbkfEYACgkQJWrqGEe9
VoT9TAgAsJZeCITvQfCBcaBScr8O86eqynvwkkfltdK8kcdCtH7P3gR9XvMmOOq8
QY8Ru072ufTj0dwT+YnWlRZ0jopK2Kd8JB41jYm4pP3euSUyIm+gf5d7AbHoWlLm
J6HfvnDNzEO0Fixpj3hqFKCDr1Xt0jWzVLh/ZyNa+0co/oJi0w0lnWxIs/iCgBQ2
sSosVhc0X0kt7RhV8RFvyIu3i9k3MFzKYt6hP07PpAVxlshvWHLOnU27FiIhGioz
UGwasbZ2XLbOZhcGaK9Q+cCrMZn52zJI8inlLKBFizU1+eUz4Q1kCVnx0OiPz7uW
7NyiiOUjPpJCrkKpWZbUnV3C2lZQOg==
=Xg6Q
-----END PGP SIGNATURE-----
Merge tag 'nand/for-6.12' into mtd/next
* Raw NAND changes
The use of for_each_child_of_node_scoped() has been spread into the
subsystem drivers. Aside from that, a couple of exit path have been
fixed (mtk, denali), the TI GPMC bindings have been enhanced to comply
with up-to-date partition descriptions and as always there is a load of
small and misc fixes.
* SPI-NAND changes
The most impacting series this cycle is bringing support for continuous
reads in the SPI-NAND subsystem. This is a feature already merged in the
raw NAND subsystem which allows optimizing the internal fetch times in
the chip while reading sequential pages within an eraseblock. For now
only Macronix NANDs benefit from this feature. While we are talking
about Macronix, some of their chip need an explicit action for selecting
a different plane, and support for it has also been brought.
The bitflip threshold has also been set to the same arbitrary level as
in the raw NAND subsystem to optimize wear leveling decisions, and
finally support for a new Winbond chip has been added.
Notable changes:
- Add Write Protect support for N25Q064A.
- New flash support for Zetta ZD25Q128C and Spansion S28HS256T.
- Fix a NULL dereference in probe path for flashes without a name. The
probe path tries to access the name without checking its existence
first. S28HS256T is the first flash to define its entry without a
name, uncovering this issue.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQTlUWNzXGEo3bFmyIR4drqP028CQUCZuWyzBQccHJhdHl1c2hA
a2VybmVsLm9yZwAKCRAR4drqP028CXj6AQCvucu8Z8Z2WDwvpn51GGNOSmgIfHkJ
i02EIQW5Cz3dygEA7pVZYyW1M/IfbgauX/NI/eYoEFwDfMD5t+MJ4HId+wY=
=F9Ud
-----END PGP SIGNATURE-----
Merge tag 'spi-nor/for-6.12' into mtd/next
SPI NOR changes for 6.12
Notable changes:
- Add Write Protect support for N25Q064A.
- New flash support for Zetta ZD25Q128C and Spansion S28HS256T.
- Fix a NULL dereference in probe path for flashes without a name. The
probe path tries to access the name without checking its existence
first. S28HS256T is the first flash to define its entry without a
name, uncovering this issue.
This triggers an issue in the bochsdrm driver, which used ioremap()
instead of ioremap_wc() to map the video RAM. The revert lets video
RAM use the WB memory type instead of the slower UC memory type.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmbmhVcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPC8gf9GT8ynM3/+csYTKKvJ3acvhvFoIl0
xzptkWh9tal7H1jPG+BFq44o8DbAcb9u5pxPng9ng5ojmPwticBRWt6dpWyKurTm
WKT2JRCV/6/sPDu8WrMLli9c/9P85ETFAyAPyr4CO4/rPg173qtLT5zxWjsLi0xz
ZtVdAdHj041skYH8REYyRm2zolq/PIj7TWWAYZVRWgX2AkQeRq//g51MpBgLfbYt
BNL7TLqpaD3ZSNHXsTZDn3c1jh9VnPGFPa+QSq2a6JgPPqCuJzs7RpPwMzTRlkoT
agdRf8Wj082u1kqMGCHLXHGQybevauLs+yQYRkojpxj774PPNzH3kEGOEA==
=9Eo3
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.11' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fix from Paolo Bonzini:
"Do not always honor guest PAT on CPUs that support self-snoop.
This triggers an issue in the bochsdrm driver, which used ioremap()
instead of ioremap_wc() to map the video RAM.
The revert lets video RAM use the WB memory type instead of the slower
UC memory type"
* tag 'for-linus-6.11' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
Revert "KVM: VMX: Always honor guest PAT on CPUs that support self-snoop"
This reverts commit 377b2f359d.
This caused a regression with the bochsdrm driver, which used ioremap()
instead of ioremap_wc() to map the video RAM. After the commit, the
WB memory type is used without the IGNORE_PAT, resulting in the slower
UC memory type. In fact, UC is slow enough to basically cause guests
to not boot... but only on new processors such as Sapphire Rapids and
Cascade Lake. Coffee Lake for example works properly, though that might
also be an effect of being on a larger, more NUMA system.
The driver has been fixed but that does not help older guests. Until we
figure out whether Cascade Lake and newer processors are working as
intended, revert the commit. Long term we might add a quirk, but the
details depend on whether the processors are working as intended: for
example if they are, the quirk might reference bochs-compatible devices,
e.g. in the name and documentation, so that userspace can disable the
quirk by default and only leave it enabled if such a device is being
exposed to the guest.
If instead this is actually a bug in CLX+, then the actions we need to
take are different and depend on the actual cause of the bug.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/riscv changes for 6.12
- Fix sbiret init before forwarding to userspace
- Don't zero-out PMU snapshot area before freeing data
- Allow legacy PMU access from guest
- Fix to allow hpmcounter31 from the guest
LoongArch KVM changes for v6.12
1. Revert qspinlock to test-and-set simple lock on VM.
2. Add Loongson Binary Translation extension support.
3. Add PMU support for guest.
4. Enable paravirt feature control from VMM.
5. Implement function kvm_para_has_feature().
KVM/arm64 updates for 6.12
* New features:
- Add a Stage-2 page table dumper, reusing the main ptdump
infrastructure, and allowing easier debugging of the our
page-table infrastructure
- Add FP8 support to the KVM/arm64 floating point handling.
- Add NV support for the AT family of instructions, which mostly
results in adding a page table walker that deals with most of the
complexity of the architecture.
* Improvements, fixes and cleanups:
- Add selftest checks for a bunch of timer emulation corner cases
- Fix the multiple of cases where KVM/arm64 doesn't correctly handle
the guest trying to use a GICv3 that isn't advertised
- Remove REG_HIDDEN_USER from the sysreg infrastructure, making
things little more simple
- Prevent MTE tags being restored by userspace if we are actively
logging writes, as that's a recipe for disaster
- Correct the refcount on a page that is not considered for MTE tag
copying (such as a device)
- Relax the synchronisation when walking a page table to split block
mappings, moving it at the end the walk, as there is no need to
perform it on every store.
- Fix boundary check when transfering memory using FFA
- Fix pKVM TLB invalidation, only affecting currently out of tree
code but worth addressing for peace of mind
MD Danish Anwar says:
====================
Introduce HSR offload support for ICSSG
This series introduces HSR offload support for ICSSG driver. To support HSR
offload to hardware, ICSSG HSR firmware is used.
This series introduces,
1. HSR frame offload support for ICSSG driver.
2. HSR Tx Packet duplication offload
3. HSR Tx Tag and Rx Tag offload
4. Multicast filtering support in HSR offload mode.
5. Dependencies related to IEP.
HSR Test Setup:
--------------
___________ ___________ ___________
| | Link AB | | Link BC | |
__| AM64* |_________| AM64 |_________| AM64* |___
| | Station A | | Station B | | Station C | |
| |___________| |___________| |___________| |
| |
|______________________________________________________________|
Link CA
*Could be any device that supports two ethernet interfaces.
Steps to switch to HSR frame forward offload mode:
-------------------------------------------------
Example assuming eth1, eth2 ports of ICSSG1 on AM64-EVM
1) Enable HSR offload for both interfaces
ethtool -K eth1 hsr-fwd-offload on
ethtool -K eth1 hsr-dup-offload on
ethtool -K eth1 hsr-tag-ins-offload on
ethtool -K eth1 hsr-tag-rm-offload on
ethtool -K eth2 hsr-fwd-offload on
ethtool -K eth2 hsr-dup-offload on
ethtool -K eth2 hsr-tag-ins-offload on
ethtool -K eth2 hsr-tag-rm-offload on
2) Create HSR interface and add slave interfaces to it
ip link add name hsr0 type hsr slave1 eth1 slave2 eth2 \
supervision 45 version 1
3) Add IP address to the HSR interface
ip addr add <IP_ADDR>/24 dev hsr0
4) Bring up the HSR interface
ip link set hsr0 up
Switching back to previous mode:
--------------------------------
1) Delete HSR interface
ip link delete hsr0
2) Disable HSR port-to-port offloading mode, packet duplication
ethtool -K eth1 hsr-fwd-offload off
ethtool -K eth1 hsr-dup-offload off
ethtool -K eth1 hsr-tag-ins-offload off
ethtool -K eth1 hsr-tag-rm-offload off
ethtool -K eth2 hsr-fwd-offload off
ethtool -K eth2 hsr-dup-offload off
ethtool -K eth2 hsr-tag-ins-offload off
ethtool -K eth2 hsr-tag-rm-offload off
Testing the port-to-port frame forward offload feature:
-----------------------------------------------------
1) Connect the LAN cables as shown in the test setup.
2) Configure Station A and Station C in HSR non-offload mode.
3) Configure Station B is HSR offload mode.
4) Since HSR is a redundancy protocol, disconnect cable "Link CA",
to ensure frames from Station A reach Station C only through
Station B.
5) Run iperf3 Server on Station C and client on station A.
7) Check the CPU usage on Station B.
CPU usage report on Station B using mpstat when running UDP iperf3:
-------------------------------------------------------------------
1) Non-Offload case
-------------------
CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle
all 0.00 0.00 0.50 0.00 3.52 29.15 0.00 0.00 66.83
0 0.00 0.00 0.00 0.00 7.00 58.00 0.00 0.00 35.00
1 0.00 0.00 0.99 0.00 0.99 0.00 0.00 0.00 98.02
2) Offload case
---------------
CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle
all 0.00 0.00 0.00 0.00 0.50 0.00 0.00 0.00 99.50
0 0.00 0.00 0.99 0.00 0.00 0.00 0.00 0.00 99.01
1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00
Note:
1) At the very least, hsr-fwd-offload must be enabled.
Without offloading the port-to-port offload, other
HSR offloads cannot be enabled.
2) hsr-tag-ins-offload and hsr-dup-offload are tightly coupled in
the firmware implementation. They both need to be enabled / disabled
together.
v1: https://lore.kernel.org/20240808110800.1281716-1-danishanwar@ti.com/
v2: https://lore.kernel.org/20240813074233.2473876-1-danishanwar@ti.com
v3: https://lore.kernel.org/20240828091901.3120935-1-danishanwar@ti.com/
v4: https://lore.kernel.org/20240904100506.3665892-1-danishanwar@ti.com/
v5: https://lore.kernel.org/20240906111538.1259418-1-danishanwar@ti.com/
[0] https://lore.kernel.org/202409061658.vSwcFJiK-lkp@intel.com/
[1] https://lore.kernel.org/20240828091901.3120935-5-danishanwar@ti.com/
[2] https://lore.kernel.org/20240828091901.3120935-7-danishanwar@ti.com/
[3] https://lore.kernel.org/20240813074233.2473876-2-danishanwar@ti.com/
[4] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=e846be0fba85
====================
Link: https://patch.msgid.link/20240911081603.2521729-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The HSR stack allows to offload its Tx packet duplication functionality to
the hardware. Enable this offloading feature for ICSSG driver. Add support
to offload HSR Tx Tag Insertion and Rx Tag Removal and duplicate discard.
hsr tag insertion offload and hsr dup offload are tightly coupled in
firmware implementation. Both these features need to be enabled / disabled
together.
Duplicate discard is done as part of RX tag removal and it is
done by the firmware. When driver sends the r30 command
ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE, firmware does RX tag removal as well as
duplicate discard.
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20240911081603.2521729-5-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for offloading HSR port-to-port frame forward to hardware.
When the slave interfaces are added to the HSR interface, the PRU cores
will be stopped and ICSSG HSR firmwares will be loaded to them.
Similarly, when HSR interface is deleted, the PRU cores will be
restarted and the last used firmwares will be reloaded. PRUeth
interfaces will be back to the last used mode.
This commit also renames some APIs that are common between switch and
hsr mode with '_fw_offload' suffix.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20240911081603.2521729-4-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The def_inc is stored in icss_iep structure. Currently default increment
(ns per clock tick) is hardcoded to 4 (Clock frequency being 250 MHz).
Change this to use the iep->def_inc variable as the iep structure is now
accessible to the driver files.
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240911081603.2521729-3-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move icss_iep structure definition and to icss_iep.h file so that the
structure members can be used / accessed by all icssg driver files.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240911081603.2521729-2-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ASUS TUF Gaming A14 has the same issue as the ROG Zephyrus G14
where it advertises SPS support but doesn't use it.
Signed-off-by: aln8 <aln8un@gmail.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240912073601.65656-1-aln8un@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add touschscreen info for the nanote next (UMPC-03-SR).
After checking with multiple owners the DMI info really is this generic.
Signed-off-by: Ckath <ckath@yandex.ru>
Link: https://lore.kernel.org/r/e8dda83a-10ae-42cf-a061-5d29be0d193a@yandex.ru
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix flash probing by name. Flash entries without a name are allowed
since commit 15eb8303bb ("mtd: spi-nor: mark the flash name as
obsolete"). But it was just until recently that a flash entry without a
name was actually introduced. This triggers a bug in the legacy probe by
name path. Skip entries without a name to fix it.
Fixes: 2095e7da80 ("mtd: spi-nor: spansion: Add support for S28HS256T")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/r/66c8ebb0-1324-4ad9-9926-8d4eb7e1e63a@nvidia.com/
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20240909072854.812206-1-mwalle@kernel.org
These flash chips are used on Google / TP-Link / ASUS OnHub devices, and
OnHub devices are write-protected by default (same as any other
ChromeOS/Chromebook system). I've referred to datasheets, and tested on
OnHub devices.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20240726185825.142733-1-computersforpeace@gmail.com
