Before this patch, instructions such as div, mul, shifts with count
in CL, cmpxchg are mishandled.
This patch adds vex prefix handling. In particular, it avoids colliding
with register operand encoded in vex.vvvv field.
Since we need to avoid two possible register operands, the selection of
scratch register needs to be from at least three registers.
After looking through a lot of CPU docs, it looks like the safest choice
is SI,DI,BX. Selecting BX needs care to not collide with implicit use of
BX by cmpxchg8b.
Test-case:
#include <stdio.h>
static const char *const pass[] = { "FAIL", "pass" };
long two = 2;
void test1(void)
{
long ax = 0, dx = 0;
asm volatile("\n"
" xor %%edx,%%edx\n"
" lea 2(%%edx),%%eax\n"
// We divide 2 by 2. Result (in eax) should be 1:
" probe1: .globl probe1\n"
" divl two(%%rip)\n"
// If we have a bug (eax mangled on entry) the result will be 2,
// because eax gets restored by probe machinery.
: "=a" (ax), "=d" (dx) /*out*/
: "0" (ax), "1" (dx) /*in*/
: "memory" /*clobber*/
);
dprintf(2, "%s: %s\n", __func__,
pass[ax == 1]
);
}
long val2 = 0;
void test2(void)
{
long old_val = val2;
long ax = 0, dx = 0;
asm volatile("\n"
" mov val2,%%eax\n" // eax := val2
" lea 1(%%eax),%%edx\n" // edx := eax+1
// eax is equal to val2. cmpxchg should store edx to val2:
" probe2: .globl probe2\n"
" cmpxchg %%edx,val2(%%rip)\n"
// If we have a bug (eax mangled on entry), val2 will stay unchanged
: "=a" (ax), "=d" (dx) /*out*/
: "0" (ax), "1" (dx) /*in*/
: "memory" /*clobber*/
);
dprintf(2, "%s: %s\n", __func__,
pass[val2 == old_val + 1]
);
}
long val3[2] = {0,0};
void test3(void)
{
long old_val = val3[0];
long ax = 0, dx = 0;
asm volatile("\n"
" mov val3,%%eax\n" // edx:eax := val3
" mov val3+4,%%edx\n"
" mov %%eax,%%ebx\n" // ecx:ebx := edx:eax + 1
" mov %%edx,%%ecx\n"
" add $1,%%ebx\n"
" adc $0,%%ecx\n"
// edx:eax is equal to val3. cmpxchg8b should store ecx:ebx to val3:
" probe3: .globl probe3\n"
" cmpxchg8b val3(%%rip)\n"
// If we have a bug (edx:eax mangled on entry), val3 will stay unchanged.
// If ecx:edx in mangled, val3 will get wrong value.
: "=a" (ax), "=d" (dx) /*out*/
: "0" (ax), "1" (dx) /*in*/
: "cx", "bx", "memory" /*clobber*/
);
dprintf(2, "%s: %s\n", __func__,
pass[val3[0] == old_val + 1 && val3[1] == 0]
);
}
int main(int argc, char **argv)
{
test1();
test2();
test3();
return 0;
}
Before this change all tests fail if probe{1,2,3} are probed.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
It is possible to replace rip-relative addressing mode with addressing
mode of the same length: (reg+disp32). This eliminates the need to fix
up immediate and correct for changing instruction length.
And we can kill arch_uprobe->def.riprel_target.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Hugh says:
The one I noticed was that it forgets all about memcg (because
it was copied from KSM, and there the replacement page has already
been charged to a memcg). See how mm/memory.c do_anonymous_page()
does a mem_cgroup_charge_anon().
Hopefully not a big problem, uprobes is a system-wide thing and only
root can insert the probes. But I agree, should be fixed anyway.
Add mem_cgroup_{un,}charge_anon() into uprobe_write_opcode(). To simplify
the error handling (and avoid the new "uncharge" label) the patch also
moves anon_vma_prepare() up before we alloc/charge the new page.
While at it fix the comment about ->mmap_sem, it is held for write.
Suggested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Pull uprobes updates from Oleg Nesterov:
"This hopefully completes the previous 'fix the handling of relative
jmp/call's' series, all changes except the last 3 unrelated fixes try
to address TODO's mentioned in the changelogs."
Signed-off-by: Ingo Molnar <mingo@kernel.org>
. Wire up perf_regs and unwind support for ARM64 (Jean Pihet)
. Move u64_swap union to its single user's header, evsel.h (Borislav Petkov)
. Fix for s390 to properly parse tracepoints plus test code (Alexander Yarygin)
. Handle EINTR error for readn/writen (Namhyung Kim)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=z16U
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/core
Pull perf/core improvements and fixes from Jiri Olsa:
* Wire up perf_regs and unwind support for ARM64 (Jean Pihet)
* Move u64_swap union to its single user's header, evsel.h (Borislav Petkov)
* Fix for s390 to properly parse tracepoints plus test code (Alexander Yarygin)
* Handle EINTR error for readn/writen (Namhyung Kim)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
. Fix perf to use non-executable stack, again (Mathias Krause)
. Remove extra '/' character in events file path (Xia Kaixu)
. Search for modules in %s/lib/modules/%s (Richard Yao)
. Build related fixies plus static build test (Jiri Olsa)
. Fix stack map lookup in dwarf unwind test (Jiri Olsa)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=FCkp
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/urgent
Pull perf/urgent fixes from Jiri Olsa:
* Fix perf to use non-executable stack, again (Mathias Krause)
* Remove extra '/' character in events file path (Xia Kaixu)
* Search for modules in %s/lib/modules/%s (Richard Yao)
* Build related fixies plus static build test (Jiri Olsa)
* Fix stack map lookup in dwarf unwind test (Jiri Olsa)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
valid_vma() rejects the VM_SHARED vmas, but this still allows to insert
a probe into the MAP_SHARED but not VM_MAYWRITE vma.
Currently this is fine, such a mapping doesn't really differ from the
private read-only mmap except mprotect(PROT_WRITE) won't work. However,
get_user_pages(FOLL_WRITE | FOLL_FORCE) doesn't allow to COW in this
case, and it would be safer to follow the same conventions as mm even
if currently this happens to work.
After the recent cda540ace6 "mm: get_user_pages(write,force) refuse
to COW in shared areas" only uprobes can insert an anon page into the
shared file-backed area, lets stop this and change valid_vma() to check
VM_MAYSHARE instead.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
uprobe_perf_open()->uprobe_apply() can fail, but this error is wrongly
ignored. Change uprobe_perf_open() to do uprobe_perf_close() and return
the error code in this case.
Change uprobe_perf_close() to propogate the error from uprobe_apply()
as well, although it should not fail.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Preparation. Move uprobe_perf_close() up before uprobe_perf_open() to
avoid the forward declaration in the next patch and make it readable.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Ignoring the "correction" logic riprel_pre_xol() and riprel_post_xol()
are very similar but look quite differently.
1. Add the "UPROBE_FIX_RIP_AX | UPROBE_FIX_RIP_CX" check at the start
of riprel_pre_xol(), like the same check in riprel_post_xol().
2. Add the trivial scratch_reg() helper which returns the address of
scratch register pre_xol/post_xol need to change.
3. Change these functions to use the new helper and avoid copy-and-paste
under if/else branches.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
default_pre_xol_op() passes ¤t->utask->autask to riprel_pre_xol()
and this is just ugly because it still needs to load current->utask to
read ->vaddr.
Remove this argument, change riprel_pre_xol() to use current->utask.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
handle_riprel_insn(), pre_xol_rip_insn() and handle_riprel_post_xol()
look confusing and inconsistent. Rename them into riprel_analyze(),
riprel_pre_xol(), and riprel_post_xol() respectively.
No changes in compiled code.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Now that UPROBE_FIX_IP/UPROBE_FIX_CALL are mutually exclusive we can
use a single "fix_ip_or_call" enum instead of 2 fix_* booleans. This
way the logic looks more understandable and clean to me.
While at it, join "case 0xea" with other "ip is correct" ret/lret cases.
Also change default_post_xol_op() to use "else if" for the same reason.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
The only insn which could have both UPROBE_FIX_IP and UPROBE_FIX_CALL
was 0xe8 "call relative", and now it is handled by branch_xol_ops.
So we can change default_post_xol_op(UPROBE_FIX_CALL) to simply push
the address of next insn == utask->vaddr + insn.length, just we need
to record insn.length into the new auprobe->def.ilen member.
Note: if/when we teach branch_xol_ops to support jcxz/loopz we can
remove the "correction" logic, UPROBE_FIX_IP can use the same address.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Extract the "push return address" code from branch_emulate_op() into
the new simple helper, push_ret_address(). It will have more users.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
handle_riprel_insn() assumes that nobody else could modify ->fixups
before. This is correct but fragile, change it to use "|=".
Also make ->fixups u8, we are going to add the new members into the
union. It is not clear why UPROBE_FIX_RIP_.X lived in the upper byte,
redefine them so that they can fit into u8.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Finally we can move arch_uprobe->fixups/rip_rela_target_address
into the new "def" struct and place this struct in the union, they
are only used by default_xol_ops paths.
The patch also renames rip_rela_target_address to riprel_target just
to make this name shorter.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
UPROBE_FIX_SETF is only needed to handle "popf" correctly but it is
processed by the generic arch_uprobe_post_xol() code. This doesn't
allows us to make ->fixups private for default_xol_ops.
1 Change default_post_xol_op(UPROBE_FIX_SETF) to set ->saved_tf = T.
"popf" always reads the flags from stack, it doesn't matter if TF
was set or not before single-step. Ignoring the naming, this is
even more logical, "saved_tf" means "owned by application" and we
do not own this flag after "popf".
2. Change arch_uprobe_post_xol() to save ->saved_tf into the local
"bool send_sigtrap" before ->post_xol().
3. Change arch_uprobe_post_xol() to ignore UPROBE_FIX_SETF and just
check ->saved_tf after ->post_xol().
With this patch ->fixups and ->rip_rela_target_address are only used
by default_xol_ops hooks, we are ready to remove them from the common
part of arch_uprobe.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
014940bad8 "uprobes/x86: Send SIGILL if arch_uprobe_post_xol() fails"
changed arch_uprobe_post_xol() to use arch_uprobe_abort_xol() if ->post_xol
fails. This was correct and helped to avoid the additional complications,
we need to clear X86_EFLAGS_TF in this case.
However, now that we have uprobe_xol_ops->abort() hook it would be better
to avoid arch_uprobe_abort_xol() here. ->post_xol() should likely do what
->abort() does anyway, we should not do the same work twice. Currently only
handle_riprel_post_xol() can be called twice, this is unnecessary but safe.
Still this is not clean and can lead to the problems in future.
Change arch_uprobe_post_xol() to clear X86_EFLAGS_TF and restore ->ip by
hand and avoid arch_uprobe_abort_xol(). This temporary uglifies the usage
of autask.saved_tf, we will cleanup this later.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
arch_uprobe_abort_xol() calls handle_riprel_post_xol() even if
auprobe->ops != default_xol_ops. This is fine correctness wise, only
default_pre_xol_op() can set UPROBE_FIX_RIP_AX|UPROBE_FIX_RIP_CX and
otherwise handle_riprel_post_xol() is nop.
But this doesn't look clean and this doesn't allow us to move ->fixups
into the union in arch_uprobe. Move this handle_riprel_post_xol() call
into the new default_abort_op() hook and change arch_uprobe_abort_xol()
accordingly.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Currently this doesn't matter, the only ->pre_xol() hook can't fail,
but we need to fix arch_uprobe_pre_xol() anyway. If ->pre_xol() fails
we should not change regs->ip/flags, we should just return the error
to make restart actually possible.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
is_64bit_mm() assumes that mm->context.ia32_compat means the 32-bit
instruction set, this is not true if the task is TIF_X32.
Change set_personality_ia32() to initialize mm->context.ia32_compat
by TIF_X32 or TIF_IA32 instead of 1. This allows to fix is_64bit_mm()
without affecting other users, they all treat ia32_compat as "bool".
TIF_ in ->ia32_compat looks a bit strange, but this is grep-friendly
and avoids the new define's.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Add the suitable ifdef's around good_insns_* arrays. We do not want
to add the ugly ifdef's into their only user, uprobe_init_insn(), so
the "#else" branch simply defines them as NULL. This doesn't generate
the extra code, gcc is smart enough, although the code is fine even if
it could not detect that (without CONFIG_IA32_EMULATION) is_64bit_mm()
is __builtin_constant_p().
The patch looks more complicated because it also moves good_insns_64
up close to good_insns_32.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Change uprobe_init_insn() to make insn_complete() == T, this makes
other insn_get_*() calls unnecessary.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
1. Extract the ->ia32_compat check from 64bit validate_insn_bits()
into the new helper, is_64bit_mm(), it will have more users.
TODO: this checks is actually wrong if mm owner is X32 task,
we need another fix which changes set_personality_ia32().
TODO: even worse, the whole 64-or-32-bit logic is very broken
and the fix is not simple, we need the nontrivial changes in
the core uprobes code.
2. Kill validate_insn_bits() and change its single caller to use
uprobe_init_insn(is_64bit_mm(mm).
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
validate_insn_32bits() and validate_insn_64bits() are very similar,
turn them into the single uprobe_init_insn() which has the additional
"bool x86_64" argument which can be passed to insn_init() and used to
choose between good_insns_64/good_insns_32.
Also kill UPROBE_FIX_NONE, it has no users.
Note: the current code doesn't use ifdef's consistently, good_insns_64
depends on CONFIG_X86_64 but good_insns_32 is unconditional. This patch
removes ifdef around good_insns_64, we will add it back later along with
the similar one for good_insns_32.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
All branch insns on x86 can be prefixed with the operand-size
override prefix, 0x66. It was only ever useful for performing
jumps to 32-bit offsets in 16-bit code segments.
In 32-bit code, such instructions are useless since
they cause IP truncation to 16 bits, and in case of call insns,
they save only 16 bits of return address and misalign
the stack pointer as a "bonus".
In 64-bit code, such instructions are treated differently by Intel
and AMD CPUs: Intel ignores the prefix altogether,
AMD treats them the same as in 32-bit mode.
Before this patch, the emulation code would execute
the instructions as if they have no 0x66 prefix.
With this patch, we refuse to attach uprobes to such insns.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Acked-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
arch/x86/tests/regs_load.S is missing the linker note about the stack
requirements, therefore making the linker fall back to an executable
stack. As this object gets linked against the final perf binary, it'll
needlessly end up with an executable stack. Fix this by adding the
appropriate linker note.
Also add a global linker flag to prevent future regressions, as
suggested by Jiri. This way perf won't get an executable stack even if
we fail to add the .GNU-stack linker note to future assembler files.
Though, doing so might create regressions the other way around, when
(statically) linking against libraries needing an executable stack.
But, apparently, regressing in that direction is wanted as it is an
indicator of poor code quality -- or just missing linker notes.
Fixes: 3c8b06f981 ("perf tests x86: Introduce perf_regs_load function")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1398617466-22749-1-git-send-email-minipli@googlemail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
The array debugfs_known_mountpoints[] will cause extra '/'
character output.
Remove it.
pre:
$ perf probe -l
/sys/kernel/debug//tracing/uprobe_events file does not exist -
please rebuild kernel with CONFIG_UPROBE_EVENTS.
post:
$ perf probe -l
/sys/kernel/debug/tracing/uprobe_events file does not exist -
please rebuild kernel with CONFIG_UPROBE_EVENTS.
Signed-off-by: Xia Kaixu <xiakaixu@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/535B6660.2060001@huawei.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Modules installed outside of the kernel's build system should go into
"%s/lib/modules/%s/extra", but at present, perf will only look at them
when they are in "%s/lib/modules/%s/kernel". Lets encourage good
citizenship by relaxing this requirement to "%s/lib/modules/%s". This
way open source modules that are out-of-tree have no incentive to start
populating a directory reserved for in-kernel modules and I can stop
hex-editing my system's perf binary when profiling OSS out-of-tree
modules.
Feedback from Namhyung Kim correctly revealed that the hex-edits that I
had been doing meant that perf was also traversing the build and source
symlinks in %s/lib/modules/%s. That is undesireable, so we explicitly
exclude them from traversal with a minor tweak to the traversal routine.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Acked-by: Namhyung kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1398532675-13684-1-git-send-email-ryao@gentoo.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Adding test for building static perf build into the automated
suite. Also available via following commands:
$ make -f tests/make make_static
- make_static: cd . && make -f Makefile DESTDIR=/tmp/tmp.7u5MlB4njo LDFLAGS=-static
$ make -f tests/make make_static_O
- make_static_O: cd . && make -f Makefile O=/tmp/tmp.Ay6r3wEmtX DESTDIR=/tmp/tmp.vK0KQwO0Vi LDFLAGS=-static
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1398760413-7574-1-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
There's false assumption in the library detection code
assuming -liberty and -lz are always present once bfd
is detected. The fails on Ubuntu (14.04) as reported
by Ingo.
Forcing the bdf dependency libraries detection any
time bfd library is detected.
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1398676935-6615-1-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
We no longer use ALL_LDFLAGS, Replacing with LDFLAGS.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1398675770-3109-1-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
This patch hooks in the perf_regs and libunwind code for ARM64.
The tools/perf/arch/arm64 is created; it contains the arch specific
code for DWARF unwinding.
Signed-off-by: Jean Pihet <jean.pihet@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1398688353-3737-1-git-send-email-jean.pihet@linaro.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
In tests/parse-events.c test cases are declared in evlist_test[]
arrays. Elements of arrays are initialized in following pattern:
[i] = {
.name = ...,
.check = ...,
},
When perf-test is running with '-v' option, 'i' variable will be
printed for every existing test.
However, we can't add any arch specific tests inside #ifdefs, because it
will create collision between the element number inside #ifdef and the
next one outside.
This patch adds 'id' field in evlist_test, uses it as a test
identifier and removes explicit numbering of array elements. This helps
to number tests with gaps.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1398440047-6641-3-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Trace events potentially can have a '-' in their trace system name,
e.g. kvm on s390 defines kvm-s390:* tracepoints.
We could not parse them, because there was no rule for this:
$ sudo ./perf top -e "kvm-s390:*"
invalid or unsupported event: 'kvm-s390:*'
This patch adds an extra rule to event_legacy_tracepoint which handles
those cases. Without the patch, perf will not accept such tracepoints in
the -e option.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: http://lkml.kernel.org/r/1398440047-6641-2-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Those readn/writen functions are to ensure read/write does I/O for
a given size exactly. But ion() - its implementation - does not
handle in case it returns prematurely due to a signal. As it's not
an error itself so just retry the operation.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1398346054-3322-1-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
. Add a test case for hists filtering (Namhyung Kim)
. Share map_groups among threads of the same group (Arnaldo Carvalho de Melo, Jiri Olsa)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=FCdU
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/core
Pull perf/core improvements and fixes from Jiri Olsa:
* Add a test case for hists filtering (Namhyung Kim)
* Share map_groups among threads of the same group (Arnaldo Carvalho de Melo, Jiri Olsa)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This test create 2 processes abstractions, with several threads
and checks they properly share and maintain map groups info.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1397490723-1992-6-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Sharing map groups within all process threads. This way
there's only one copy of mmap info and it's reachable
from any thread within the process.
Original-patch-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1397490723-1992-5-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
We will share it among threads in the same process.
Adding map_groups__get/map_groups__put interface for that.
Signed-off-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1397490723-1992-4-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Moving towards sharing map groups within a process threads.
Because of this we need the map groups to be dynamically allocated. No
other functional change is intended in here.
Based on a patch by Jiri Olsa, but this time _just_ making the
conversion from statically allocating thread->mg to turning it into a
pointer and instead of initializing it at thread's constructor,
introduce a constructor/destructor for the map_groups class and
call at thread creation time.
Later we will introduce the get/put methods when we move to sharing
those map_groups, when the get/put refcounting semantics will be needed.
Signed-off-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1397490723-1992-3-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Adding automated test for memory maps lookup within multiple machines
threads.
The test creates 4 threads and separated memory maps. It checks that we
could use thread__find_addr_map function with thread object based on TID
to find memory maps.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1397490723-1992-2-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
The fake_setup_machine() is for setting up a environment for testing
various hists operations. As it'll be used for other test cases it'd
better factoring it out.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1398396494-12811-1-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
