commit 72db61d7d1 upstream.
This function should not allow negative values of "wr_val". If
negatives are allowed then capping the upper bound at 7 is
meaningless. Let's make it unsigned.
Fixes: 7dc7967fc3 ("staging: kpc2000: add initial set of Daktronics drivers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200224103325.hrxdnaeqsthplu42@kili.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 536f561d87 upstream.
The driver was issuing synchronous uninterruptible control requests
without using a timeout. This could lead to the driver hanging on
various user requests due to a malfunctioning (or malicious) device
until the device is physically disconnected.
The USB upper limit of five seconds per request should be more than
enough.
Fixes: f3d27f34fd ("[media] usbtv: Add driver for Fushicai USBTV007 video frame grabber")
Fixes: c53a846c48 ("[media] usbtv: add video controls")
Cc: stable <stable@vger.kernel.org> # 3.11
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bca243b1ce upstream.
commit 1b976fc6d6 ("media: b2c2-flexcop-usb: add sanity checking") added
an endpoint sanity check to address a NULL-pointer dereference on probe.
Unfortunately the check was done on the current altsetting which was later
changed.
Fix this by moving the sanity check to after the altsetting is changed.
Fixes: 1b976fc6d6 ("media: b2c2-flexcop-usb: add sanity checking")
Cc: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52974d94a2 upstream.
When handling a PIO bulk transfer with highmem buffer, a temporary
mapping is assigned to urb->transfer_buffer. After the transfer is
complete, an invalid address is left behind in this pointer. This is
not ordinarily a problem since nothing touches that buffer before the
urb is released. However, when usbmon is active, usbmon_urb_complete()
calls (indirectly) mon_bin_get_data() which does access the transfer
buffer if it is set. To prevent an invalid memory access here, reset
urb->transfer_buffer to NULL when finished (musb_host_rx()), or do not
set it at all (musb_host_tx()).
Fixes: 8e8a551654 ("usb: musb: host: Handle highmem in PIO mode")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200316211136.2274-8-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 62d65bdd9d upstream.
commit b401f8c4f4 ("USB: cdc-acm: fix rounding error in TIOCSSERIAL")
introduced a regression by changing the order of capability and close
settings change checks. When running with CAP_SYS_ADMIN setting the
close settings to the values already set resulted in -EOPNOTSUPP.
Fix this by changing the check order back to how it was before.
Fixes: b401f8c4f4 ("USB: cdc-acm: fix rounding error in TIOCSSERIAL")
Cc: Anthony Mallet <anthony.mallet@laas.fr>
Cc: stable <stable@vger.kernel.org>
Cc: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Matthias Reichl <hias@horus.com>
Link: https://lore.kernel.org/r/20200327150350.3657-1-hias@horus.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2d67fec0b upstream.
Anatoly has been fuzzing with kBdysch harness and reported a hang in
one of the outcomes:
0: (b7) r0 = 808464432
1: (7f) r0 >>= r0
2: (14) w0 -= 808464432
3: (07) r0 += 808464432
4: (b7) r1 = 808464432
5: (de) if w1 s<= w0 goto pc+0
R0_w=invP(id=0,umin_value=808464432,umax_value=5103431727,var_off=(0x30303020;0x10000001f)) R1_w=invP808464432 R10=fp0
6: (07) r0 += -2144337872
7: (14) w0 -= -1607454672
8: (25) if r0 > 0x30303030 goto pc+0
R0_w=invP(id=0,umin_value=271581184,umax_value=271581311,var_off=(0x10300000;0x7f)) R1_w=invP808464432 R10=fp0
9: (76) if w0 s>= 0x303030 goto pc+2
12: (95) exit
from 8 to 9: safe
from 5 to 6: R0_w=invP(id=0,umin_value=808464432,umax_value=5103431727,var_off=(0x30303020;0x10000001f)) R1_w=invP808464432 R10=fp0
6: (07) r0 += -2144337872
7: (14) w0 -= -1607454672
8: (25) if r0 > 0x30303030 goto pc+0
R0_w=invP(id=0,umin_value=271581184,umax_value=271581311,var_off=(0x10300000;0x7f)) R1_w=invP808464432 R10=fp0
9: safe
from 8 to 9: safe
verification time 589 usec
stack depth 0
processed 17 insns (limit 1000000) [...]
The underlying program was xlated as follows:
# bpftool p d x i 9
0: (b7) r0 = 808464432
1: (7f) r0 >>= r0
2: (14) w0 -= 808464432
3: (07) r0 += 808464432
4: (b7) r1 = 808464432
5: (de) if w1 s<= w0 goto pc+0
6: (07) r0 += -2144337872
7: (14) w0 -= -1607454672
8: (25) if r0 > 0x30303030 goto pc+0
9: (76) if w0 s>= 0x303030 goto pc+2
10: (05) goto pc-1
11: (05) goto pc-1
12: (95) exit
The verifier rewrote original instructions it recognized as dead code with
'goto pc-1', but reality differs from verifier simulation in that we're
actually able to trigger a hang due to hitting the 'goto pc-1' instructions.
Taking different examples to make the issue more obvious: in this example
we're probing bounds on a completely unknown scalar variable in r1:
[...]
5: R0_w=inv1 R1_w=inv(id=0) R10=fp0
5: (18) r2 = 0x4000000000
7: R0_w=inv1 R1_w=inv(id=0) R2_w=inv274877906944 R10=fp0
7: (18) r3 = 0x2000000000
9: R0_w=inv1 R1_w=inv(id=0) R2_w=inv274877906944 R3_w=inv137438953472 R10=fp0
9: (18) r4 = 0x400
11: R0_w=inv1 R1_w=inv(id=0) R2_w=inv274877906944 R3_w=inv137438953472 R4_w=inv1024 R10=fp0
11: (18) r5 = 0x200
13: R0_w=inv1 R1_w=inv(id=0) R2_w=inv274877906944 R3_w=inv137438953472 R4_w=inv1024 R5_w=inv512 R10=fp0
13: (2d) if r1 > r2 goto pc+4
R0_w=inv1 R1_w=inv(id=0,umax_value=274877906944,var_off=(0x0; 0x7fffffffff)) R2_w=inv274877906944 R3_w=inv137438953472 R4_w=inv1024 R5_w=inv512 R10=fp0
14: R0_w=inv1 R1_w=inv(id=0,umax_value=274877906944,var_off=(0x0; 0x7fffffffff)) R2_w=inv274877906944 R3_w=inv137438953472 R4_w=inv1024 R5_w=inv512 R10=fp0
14: (ad) if r1 < r3 goto pc+3
R0_w=inv1 R1_w=inv(id=0,umin_value=137438953472,umax_value=274877906944,var_off=(0x0; 0x7fffffffff)) R2_w=inv274877906944 R3_w=inv137438953472 R4_w=inv1024 R5_w=inv512 R10=fp0
15: R0=inv1 R1=inv(id=0,umin_value=137438953472,umax_value=274877906944,var_off=(0x0; 0x7fffffffff)) R2=inv274877906944 R3=inv137438953472 R4=inv1024 R5=inv512 R10=fp0
15: (2e) if w1 > w4 goto pc+2
R0=inv1 R1=inv(id=0,umin_value=137438953472,umax_value=274877906944,var_off=(0x0; 0x7f00000000)) R2=inv274877906944 R3=inv137438953472 R4=inv1024 R5=inv512 R10=fp0
16: R0=inv1 R1=inv(id=0,umin_value=137438953472,umax_value=274877906944,var_off=(0x0; 0x7f00000000)) R2=inv274877906944 R3=inv137438953472 R4=inv1024 R5=inv512 R10=fp0
16: (ae) if w1 < w5 goto pc+1
R0=inv1 R1=inv(id=0,umin_value=137438953472,umax_value=274877906944,var_off=(0x0; 0x7f00000000)) R2=inv274877906944 R3=inv137438953472 R4=inv1024 R5=inv512 R10=fp0
[...]
We're first probing lower/upper bounds via jmp64, later we do a similar
check via jmp32 and examine the resulting var_off there. After fall-through
in insn 14, we get the following bounded r1 with 0x7fffffffff unknown marked
bits in the variable section.
Thus, after knowing r1 <= 0x4000000000 and r1 >= 0x2000000000:
max: 0b100000000000000000000000000000000000000 / 0x4000000000
var: 0b111111111111111111111111111111111111111 / 0x7fffffffff
min: 0b010000000000000000000000000000000000000 / 0x2000000000
Now, in insn 15 and 16, we perform a similar probe with lower/upper bounds
in jmp32.
Thus, after knowing r1 <= 0x4000000000 and r1 >= 0x2000000000 and
w1 <= 0x400 and w1 >= 0x200:
max: 0b100000000000000000000000000000000000000 / 0x4000000000
var: 0b111111100000000000000000000000000000000 / 0x7f00000000
min: 0b010000000000000000000000000000000000000 / 0x2000000000
The lower/upper bounds haven't changed since they have high bits set in
u64 space and the jmp32 tests can only refine bounds in the low bits.
However, for the var part the expectation would have been 0x7f000007ff
or something less precise up to 0x7fffffffff. A outcome of 0x7f00000000
is not correct since it would contradict the earlier probed bounds
where we know that the result should have been in [0x200,0x400] in u32
space. Therefore, tests with such info will lead to wrong verifier
assumptions later on like falsely predicting conditional jumps to be
always taken, etc.
The issue here is that __reg_bound_offset32()'s implementation from
commit 581738a681 ("bpf: Provide better register bounds after jmp32
instructions") makes an incorrect range assumption:
static void __reg_bound_offset32(struct bpf_reg_state *reg)
{
u64 mask = 0xffffFFFF;
struct tnum range = tnum_range(reg->umin_value & mask,
reg->umax_value & mask);
struct tnum lo32 = tnum_cast(reg->var_off, 4);
struct tnum hi32 = tnum_lshift(tnum_rshift(reg->var_off, 32), 32);
reg->var_off = tnum_or(hi32, tnum_intersect(lo32, range));
}
In the above walk-through example, __reg_bound_offset32() as-is chose
a range after masking with 0xffffffff of [0x0,0x0] since umin:0x2000000000
and umax:0x4000000000 and therefore the lo32 part was clamped to 0x0 as
well. However, in the umin:0x2000000000 and umax:0x4000000000 range above
we'd end up with an actual possible interval of [0x0,0xffffffff] for u32
space instead.
In case of the original reproducer, the situation looked as follows at
insn 5 for r0:
[...]
5: R0_w=invP(id=0,umin_value=808464432,umax_value=5103431727,var_off=(0x0; 0x1ffffffff)) R1_w=invP808464432 R10=fp0
0x30303030 0x13030302f
5: (de) if w1 s<= w0 goto pc+0
R0_w=invP(id=0,umin_value=808464432,umax_value=5103431727,var_off=(0x30303020; 0x10000001f)) R1_w=invP808464432 R10=fp0
0x30303030 0x13030302f
[...]
After the fall-through, we similarly forced the var_off result into
the wrong range [0x30303030,0x3030302f] suggesting later on that fixed
bits must only be of 0x30303020 with 0x10000001f unknowns whereas such
assumption can only be made when both bounds in hi32 range match.
Originally, I was thinking to fix this by moving reg into a temp reg and
use proper coerce_reg_to_size() helper on the temp reg where we can then
based on that define the range tnum for later intersection:
static void __reg_bound_offset32(struct bpf_reg_state *reg)
{
struct bpf_reg_state tmp = *reg;
struct tnum lo32, hi32, range;
coerce_reg_to_size(&tmp, 4);
range = tnum_range(tmp.umin_value, tmp.umax_value);
lo32 = tnum_cast(reg->var_off, 4);
hi32 = tnum_lshift(tnum_rshift(reg->var_off, 32), 32);
reg->var_off = tnum_or(hi32, tnum_intersect(lo32, range));
}
In the case of the concrete example, this gives us a more conservative unknown
section. Thus, after knowing r1 <= 0x4000000000 and r1 >= 0x2000000000 and
w1 <= 0x400 and w1 >= 0x200:
max: 0b100000000000000000000000000000000000000 / 0x4000000000
var: 0b111111111111111111111111111111111111111 / 0x7fffffffff
min: 0b010000000000000000000000000000000000000 / 0x2000000000
However, above new __reg_bound_offset32() has no effect on refining the
knowledge of the register contents. Meaning, if the bounds in hi32 range
mismatch we'll get the identity function given the range reg spans
[0x0,0xffffffff] and we cast var_off into lo32 only to later on binary
or it again with the hi32.
Likewise, if the bounds in hi32 range match, then we mask both bounds
with 0xffffffff, use the resulting umin/umax for the range to later
intersect the lo32 with it. However, _prior_ called __reg_bound_offset()
did already such intersection on the full reg and we therefore would only
repeat the same operation on the lo32 part twice.
Given this has no effect and the original commit had false assumptions,
this patch reverts the code entirely which is also more straight forward
for stable trees: apparently 581738a681 got auto-selected by Sasha's
ML system and misclassified as a fix, so it got sucked into v5.4 where
it should never have landed. A revert is low-risk also from a user PoV
since it requires a recent kernel and llc to opt-into -mcpu=v3 BPF CPU
to generate jmp32 instructions. A proper bounds refinement would need a
significantly more complex approach which is currently being worked, but
no stable material [0]. Hence revert is best option for stable. After the
revert, the original reported program gets rejected as follows:
1: (7f) r0 >>= r0
2: (14) w0 -= 808464432
3: (07) r0 += 808464432
4: (b7) r1 = 808464432
5: (de) if w1 s<= w0 goto pc+0
R0_w=invP(id=0,umin_value=808464432,umax_value=5103431727,var_off=(0x0; 0x1ffffffff)) R1_w=invP808464432 R10=fp0
6: (07) r0 += -2144337872
7: (14) w0 -= -1607454672
8: (25) if r0 > 0x30303030 goto pc+0
R0_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x3fffffff)) R1_w=invP808464432 R10=fp0
9: (76) if w0 s>= 0x303030 goto pc+2
R0=invP(id=0,umax_value=3158063,var_off=(0x0; 0x3fffff)) R1=invP808464432 R10=fp0
10: (30) r0 = *(u8 *)skb[808464432]
BPF_LD_[ABS|IND] uses reserved fields
processed 11 insns (limit 1000000) [...]
[0] https://lore.kernel.org/bpf/158507130343.15666.8018068546764556975.stgit@john-Precision-5820-Tower/T/
Fixes: 581738a681 ("bpf: Provide better register bounds after jmp32 instructions")
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200330160324.15259-2-daniel@iogearbox.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0af3e137c1 ]
hyperv_timer.c exports hyperv_cs, which is used by stimers and the
timesync mechanism. However, the clocksource dependency is not
needed: these mechanisms only depend on the partition reference
counter (which can be read via a MSR or via the TSC Reference Page).
Introduce the (function) pointer hv_read_reference_counter, as an
embodiment of the partition reference counter read, and export it
in place of the hyperv_cs pointer. The latter can be removed.
This should clarify that there's no relationship between Hyper-V
stimers & timesync and the Linux clocksource abstractions. No
functional or semantic change.
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200109160650.16150-2-parri.andrea@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2e8c339b49 upstream.
On Android/x86 the module loading infrastructure can't deal with
softdeps. Therefore the check for presence of the Realtek PHY driver
module fails. mdiobus_register() will try to load the PHY driver
module, therefore move the check to after this call and explicitly
check that a dedicated PHY driver is bound to the PHY device.
Fixes: f325937735 ("r8169: check that Realtek PHY driver module is loaded")
Reported-by: Chih-Wei Huang <cwhuang@android-x86.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a9de3af21 upstream.
The vti6_rcv function performs some tests on the retrieved tunnel
including checking the IP protocol, the XFRM input policy, the
source and destination address.
In all but one places the skb is released in the error case. When
the input policy check fails the network packet is leaked.
Using the same goto-label discard in this case to fix this problem.
Fixes: ed1efb2aef ("ipv6: Add support for IPsec virtual tunnel interfaces")
Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b642d48254 upstream.
USB-ID signal has a pullup on the schematic, but in reality it's not
pulled up, so add a GPIO pullup. And we also need a usb0_vbus_power-supply
for VBUS detection.
This fixes OTG mode detection and charging issues on TBS A711 tablet.
The issues came from ID pin reading 0, causing host mode to be enabled,
when it should not be, leading to DRVVBUS being enabled, which disabled
the charger.
Fixes: f2f221c781 ("ARM: dts: sun8i: a711: Enable USB OTG")
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90db6d772f upstream.
The bucket->lock is not needed in the sock_hash_free and sock_map_free
calls, in fact it is causing a splat due to being inside rcu block.
| BUG: sleeping function called from invalid context at net/core/sock.c:2935
| in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 62, name: kworker/0:1
| 3 locks held by kworker/0:1/62:
| #0: ffff88813b019748 ((wq_completion)events){+.+.}, at: process_one_work+0x1d7/0x5e0
| #1: ffffc900000abe50 ((work_completion)(&map->work)){+.+.}, at: process_one_work+0x1d7/0x5e0
| #2: ffff8881381f6df8 (&stab->lock){+...}, at: sock_map_free+0x26/0x180
| CPU: 0 PID: 62 Comm: kworker/0:1 Not tainted 5.5.0-04008-g7b083332376e #454
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
| Workqueue: events bpf_map_free_deferred
| Call Trace:
| dump_stack+0x71/0xa0
| ___might_sleep.cold+0xa6/0xb6
| lock_sock_nested+0x28/0x90
| sock_map_free+0x5f/0x180
| bpf_map_free_deferred+0x58/0x80
| process_one_work+0x260/0x5e0
| worker_thread+0x4d/0x3e0
| kthread+0x108/0x140
| ? process_one_work+0x5e0/0x5e0
| ? kthread_park+0x90/0x90
| ret_from_fork+0x3a/0x50
The reason we have stab->lock and bucket->locks in sockmap code is to
handle checking EEXIST in update/delete cases. We need to be careful during
an update operation that we check for EEXIST and we need to ensure that the
psock object is not in some partial state of removal/insertion while we do
this. So both map_update_common and sock_map_delete need to guard from being
run together potentially deleting an entry we are checking, etc. But by the
time we get to the tear-down code in sock_{ma[|hash}_free we have already
disconnected the map and we just did synchronize_rcu() in the line above so
no updates/deletes should be in flight. Because of this we can drop the
bucket locks from the map free'ing code, noting no update/deletes can be
in-flight.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Reported-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/158385850787.30597.8346421465837046618.stgit@john-Precision-5820-Tower
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da6c7faeb1 upstream.
btf_enum_check_member() was currently sure to recognize the size of
"enum" type members in struct/union as the size of "int" even if
its size was packed.
This patch fixes BTF enum verification to use the correct size
of member in BPF programs.
Fixes: 179cde8cef ("bpf: btf: Check members of struct/union")
Signed-off-by: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/1583825550-18606-2-git-send-email-komachi.yoshiki@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80f1f85036 upstream.
The current x32 BPF JIT is incorrect for JMP32 JSET BPF_X when the upper
32 bits of operand registers are non-zero in certain situations.
The problem is in the following code:
case BPF_JMP | BPF_JSET | BPF_X:
case BPF_JMP32 | BPF_JSET | BPF_X:
...
/* and dreg_lo,sreg_lo */
EMIT2(0x23, add_2reg(0xC0, sreg_lo, dreg_lo));
/* and dreg_hi,sreg_hi */
EMIT2(0x23, add_2reg(0xC0, sreg_hi, dreg_hi));
/* or dreg_lo,dreg_hi */
EMIT2(0x09, add_2reg(0xC0, dreg_lo, dreg_hi));
This code checks the upper bits of the operand registers regardless if
the BPF instruction is BPF_JMP32 or BPF_JMP64. Registers dreg_hi and
dreg_lo are not loaded from the stack for BPF_JMP32, however, they can
still be polluted with values from previous instructions.
The following BPF program demonstrates the bug. The jset64 instruction
loads the temporary registers and performs the jump, since ((u64)r7 &
(u64)r8) is non-zero. The jset32 should _not_ be taken, as the lower
32 bits are all zero, however, the current JIT will take the branch due
the pollution of temporary registers from the earlier jset64.
mov64 r0, 0
ld64 r7, 0x8000000000000000
ld64 r8, 0x8000000000000000
jset64 r7, r8, 1
exit
jset32 r7, r8, 1
mov64 r0, 2
exit
The expected return value of this program is 2; under the buggy x32 JIT
it returns 0. The fix is to skip using the upper 32 bits for jset32 and
compare the upper 32 bits for jset64 only.
All tests in test_bpf.ko and selftests/bpf/test_verifier continue to
pass with this change.
We found this bug using our automated verification tool, Serval.
Fixes: 69f827eb6e ("x32: bpf: implement jitting of JMP32")
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200305234416.31597-1-luke.r.nels@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d944b27df1 upstream.
Nvidia card may come with a "phantom" UCSI device, and its driver gets
stuck in probe routine, prevents any system PM operations like suspend.
There's an unaccounted case that the target time can equal to jiffies in
gpu_i2c_check_status(), let's solve that by using readl_poll_timeout()
instead of jiffies comparison functions.
Fixes: c71bcdcb42 ("i2c: add i2c bus driver for NVIDIA GPU")
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ajay Gupta <ajayg@nvidia.com>
Tested-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcfabee1af upstream.
Set skb->tc_redirected to 1, otherwise the ifb driver drops the packet.
Set skb->tc_from_ingress to 1 to reinject the packet back to the ingress
path after leaving the ifb egress path.
This patch inconditionally sets on these two skb fields that are
meaningful to the ifb driver. The existing forward action is guaranteed
to run from ingress path.
Fixes: 39e6dea28a ("netfilter: nf_tables: add forward expression to the netdev family")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76a109fac2 upstream.
Make sure the forward action is only used from ingress.
Fixes: 39e6dea28a ("netfilter: nf_tables: add forward expression to the netdev family")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 41e9ec5a54 upstream.
Since pskb_may_pull may change skb->data, so we need to reload ip{v6}h at
the right place.
Fixes: a908fdec3d ("netfilter: nf_flow_table: move ipv6 offload hook code to nf_flow_table")
Fixes: 7d20868717 ("netfilter: nf_flow_table: move ipv4 offload hook code to nf_flow_table")
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b95d2ccd2c upstream.
When a frame is transmitted via the nl80211 TX rather than as a
normal frame, IEEE80211_TX_CTRL_PORT_CTRL_PROTO wasn't set and
this will lead to wrong decisions (rate control etc.) being made
about the frame; fix this.
Fixes: 9118064914 ("mac80211: Add support for tx_control_port")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200326155333.f183f52b02f0.I4054e2a8c11c2ddcb795a0103c87be3538690243@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 575a97acc3 upstream.
The he_sr_control field is just a u8, so le32_to_cpu()
shouldn't be applied to it; this was evidently copied
from ieee80211_he_oper_size(). Fix it, and also adjust
the type of the local variable.
Fixes: ef11a931bd ("mac80211: HE: add Spatial Reuse element parsing support")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200325090918.dfe483b49e06.Ia53622f23b2610a2ae6ea39a199866196fe946c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9efcc4a129 upstream.
When it's probing all of a fileserver's interfaces to find which one is
best to use, afs_do_probe_fileserver() takes a lock on the server record
and notes the pointer to the address list.
It doesn't, however, pin the address list, so as soon as it drops the
lock, there's nothing to stop the address list from being freed under
us.
Fix this by taking a ref on the address list inside the locked section
and dropping it at the end of the function.
Fixes: 3bf0fb6f33 ("afs: Probe multiple fileservers simultaneously")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4636cf184d upstream.
Fix a couple of tracelines to indicate the usage count after the atomic op,
not the usage count before it to be consistent with other afs and rxrpc
trace lines.
Change the wording of the afs_call_trace_work trace ID label from "WORK" to
"QUEUE" to reflect the fact that it's queueing work, not doing work.
Fixes: 341f741f04 ("afs: Refcount the afs_call struct")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d7587db0d upstream.
Fix the handling of signals in client rxrpc calls made by the afs
filesystem. Ignore signals completely, leaving call abandonment or
connection loss to be detected by timeouts inside AF_RXRPC.
Allowing a filesystem call to be interrupted after the entire request has
been transmitted and an abort sent means that the server may or may not
have done the action - and we don't know. It may even be worse than that
for older servers.
Fixes: bc5e3a546d ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c59406ed0 upstream.
After xfrm_add_policy add a policy, its ref is 2, then
xfrm_policy_timer
read_lock
xp->walk.dead is 0
....
mod_timer()
xfrm_policy_kill
policy->walk.dead = 1
....
del_timer(&policy->timer)
xfrm_pol_put //ref is 1
xfrm_pol_put //ref is 0
xfrm_policy_destroy
call_rcu
xfrm_pol_hold //ref is 1
read_unlock
xfrm_pol_put //ref is 0
xfrm_policy_destroy
call_rcu
xfrm_policy_destroy is called twice, which may leads to
double free.
Call Trace:
RIP: 0010:refcount_warn_saturate+0x161/0x210
...
xfrm_policy_timer+0x522/0x600
call_timer_fn+0x1b3/0x5e0
? __xfrm_decode_session+0x2990/0x2990
? msleep+0xb0/0xb0
? _raw_spin_unlock_irq+0x24/0x40
? __xfrm_decode_session+0x2990/0x2990
? __xfrm_decode_session+0x2990/0x2990
run_timer_softirq+0x5c5/0x10e0
Fix this by use write_lock_bh in xfrm_policy_kill.
Fixes: ea2dea9dac ("xfrm: remove policy lock when accessing policy->walk.dead")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Timo Teräs <timo.teras@iki.fi>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1a7e3a36e upstream.
Without doing verify_sec_ctx_len() check in xfrm_add_acquire(), it may be
out-of-bounds to access uctx->ctx_str with uctx->ctx_len, as noticed by
syz:
BUG: KASAN: slab-out-of-bounds in selinux_xfrm_alloc_user+0x237/0x430
Read of size 768 at addr ffff8880123be9b4 by task syz-executor.1/11650
Call Trace:
dump_stack+0xe8/0x16e
print_address_description.cold.3+0x9/0x23b
kasan_report.cold.4+0x64/0x95
memcpy+0x1f/0x50
selinux_xfrm_alloc_user+0x237/0x430
security_xfrm_policy_alloc+0x5c/0xb0
xfrm_policy_construct+0x2b1/0x650
xfrm_add_acquire+0x21d/0xa10
xfrm_user_rcv_msg+0x431/0x6f0
netlink_rcv_skb+0x15a/0x410
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x50e/0x6a0
netlink_sendmsg+0x8ae/0xd40
sock_sendmsg+0x133/0x170
___sys_sendmsg+0x834/0x9a0
__sys_sendmsg+0x100/0x1e0
do_syscall_64+0xe5/0x660
entry_SYSCALL_64_after_hwframe+0x6a/0xdf
So fix it by adding the missing verify_sec_ctx_len check there.
Fixes: 980ebd2579 ("[IPSEC]: Sync series - acquire insert")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 171d449a02 upstream.
It's not sufficient to do 'uctx->len != (sizeof(struct xfrm_user_sec_ctx) +
uctx->ctx_len)' check only, as uctx->len may be greater than nla_len(rt),
in which case it will cause slab-out-of-bounds when accessing uctx->ctx_str
later.
This patch is to fix it by return -EINVAL when uctx->len > nla_len(rt).
Fixes: df71837d50 ("[LSM-IPSec]: Security association restriction.")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ba80013fba upstream.
It has been discovered that this feature can globally block the RX port,
so it should be allowed for highly privileged users only.
Fixes: 03404e8ae652("IB/mlx5: Add support to dropless RQ")
Link: https://lore.kernel.org/r/20200322124906.1173790-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df81dfcfd6 upstream.
The handling of notify->work did not properly maintain notify->kref in two
cases:
1) where the work was already scheduled, another irq_set_affinity_locked()
would get the ref and (no-op-ly) schedule the work. Thus when
irq_affinity_notify() ran, it would drop the original ref but not the
additional one.
2) when cancelling the (old) work in irq_set_affinity_notifier(), if there
was outstanding work a ref had been got for it but was never put.
Fix both by checking the return values of the work handling functions
(schedule_work() for (1) and cancel_work_sync() for (2)) and put the
extra ref if the return value indicates preexisting work.
Fixes: cd7eab44e9 ("genirq: Add IRQ affinity notifiers")
Fixes: 59c39840f5 ("genirq: Prevent use-after-free and work list corruption")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ben Hutchings <ben@decadent.org.uk>
Link: https://lkml.kernel.org/r/24f5983f-2ab5-e83a-44ee-a45b5f9300f5@solarflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dde9f09558 upstream.
When an AFS service handler function aborts a call, AF_RXRPC marks the call
as complete - which means that it's not going to get any more packets from
the receiver. This is a problem because reception of the final ACK is what
triggers afs_deliver_to_call() to drop the final ref on the afs_call
object.
Instead, aborted AFS service calls may then just sit around waiting for
ever or until they're displaced by a new call on the same connection
channel or a connection-level abort.
Fix this by calling afs_set_call_complete() to finalise the afs_call struct
representing the call.
However, we then need to drop the ref that stops the call from being
deallocated. We can do this in afs_set_call_complete(), as the work queue
is holding a separate ref of its own, but then we shouldn't do it in
afs_process_async_call() and afs_delete_async_call().
call->drop_ref is set to indicate that a ref needs dropping for a call and
this is dealt with when we transition a call to AFS_CALL_COMPLETE.
But then we also need to get rid of the ref that pins an asynchronous
client call. We can do this by the same mechanism, setting call->drop_ref
for an async client call too.
We can also get rid of call->incoming since nothing ever sets it and only
one thing ever checks it (futilely).
A trace of the rxrpc_call and afs_call struct ref counting looks like:
<idle>-0 [001] ..s5 164.764892: rxrpc_call: c=00000002 SEE u=3 sp=rxrpc_new_incoming_call+0x473/0xb34 a=00000000442095b5
<idle>-0 [001] .Ns5 164.766001: rxrpc_call: c=00000002 QUE u=4 sp=rxrpc_propose_ACK+0xbe/0x551 a=00000000442095b5
<idle>-0 [001] .Ns4 164.766005: rxrpc_call: c=00000002 PUT u=3 sp=rxrpc_new_incoming_call+0xa3f/0xb34 a=00000000442095b5
<idle>-0 [001] .Ns7 164.766433: afs_call: c=00000002 WAKE u=2 o=11 sp=rxrpc_notify_socket+0x196/0x33c
kworker/1:2-1810 [001] ...1 164.768409: rxrpc_call: c=00000002 SEE u=3 sp=rxrpc_process_call+0x25/0x7ae a=00000000442095b5
kworker/1:2-1810 [001] ...1 164.769439: rxrpc_tx_packet: c=00000002 e9f1a7a8:95786a88:00000008:09c5 00000001 00000000 02 22 ACK CallAck
kworker/1:2-1810 [001] ...1 164.769459: rxrpc_call: c=00000002 PUT u=2 sp=rxrpc_process_call+0x74f/0x7ae a=00000000442095b5
kworker/1:2-1810 [001] ...1 164.770794: afs_call: c=00000002 QUEUE u=3 o=12 sp=afs_deliver_to_call+0x449/0x72c
kworker/1:2-1810 [001] ...1 164.770829: afs_call: c=00000002 PUT u=2 o=12 sp=afs_process_async_call+0xdb/0x11e
kworker/1:2-1810 [001] ...2 164.771084: rxrpc_abort: c=00000002 95786a88:00000008 s=0 a=1 e=1 K-1
kworker/1:2-1810 [001] ...1 164.771461: rxrpc_tx_packet: c=00000002 e9f1a7a8:95786a88:00000008:09c5 00000002 00000000 04 00 ABORT CallAbort
kworker/1:2-1810 [001] ...1 164.771466: afs_call: c=00000002 PUT u=1 o=12 sp=SRXAFSCB_ProbeUuid+0xc1/0x106
The abort generated in SRXAFSCB_ProbeUuid(), labelled "K-1", indicates that
the local filesystem/cache manager didn't recognise the UUID as its own.
Fixes: 2067b2b3f4 ("afs: Fix the CB.ProbeUuid service handler to reply correctly")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2d47fbacf2 upstream.
The following modify sequence (loosely based on ipoib) will lose a pkey
modifcation:
- Modify (pkey index, port)
- Modify (new pkey index, NO port)
After the first modify, the qp_pps list will have saved the pkey and the
unit on the main list.
During the second modify, get_new_pps() will fetch the port from qp_pps
and read the new pkey index from qp_attr->pkey_index. The state will
still be zero, or IB_PORT_PKEY_NOT_VALID. Because of the invalid state,
the new values will never replace the one in the qp pps list, losing the
new pkey.
This happens because the following if statements will never correct the
state because the first term will be false. If the code had been executed,
it would incorrectly overwrite valid values.
if ((qp_attr_mask & IB_QP_PKEY_INDEX) && (qp_attr_mask & IB_QP_PORT))
new_pps->main.state = IB_PORT_PKEY_VALID;
if (!(qp_attr_mask & (IB_QP_PKEY_INDEX | IB_QP_PORT)) && qp_pps) {
new_pps->main.port_num = qp_pps->main.port_num;
new_pps->main.pkey_index = qp_pps->main.pkey_index;
if (qp_pps->main.state != IB_PORT_PKEY_NOT_VALID)
new_pps->main.state = IB_PORT_PKEY_VALID;
}
Fix by joining the two if statements with an or test to see if qp_pps is
non-NULL and in the correct state.
Fixes: 1dd017882e ("RDMA/core: Fix protection fault in get_pkey_idx_qp_list")
Link: https://lore.kernel.org/r/20200313124704.14982.55907.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d8006abaa upstream.
There is no compensating cgroup_bpf_put() for each ancestor cgroup in
cgroup_bpf_inherit(). If compute_effective_progs returns error, those cgroups
won't be freed ever. Fix it by putting them in cleanup code path.
Fixes: e10360f815 ("bpf: cgroup: prevent out-of-order release of cgroup bpf")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Link: https://lore.kernel.org/bpf/20200309224017.1063297-1-andriin@fb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e91506ba0 upstream.
Commit aa23ca3d98 ("gpiolib: acpi: Add honor_wakeup module-option +
quirk mechanism") was added to deal with spurious wakeups on one specific
model of the HP x2 10 series. In the mean time I have learned that there
are at least 3 different HP x2 10 models:
Bay Trail SoC + AXP288 PMIC
Cherry Trail SoC + AXP288 PMIC
Cherry Trail SoC + TI PMIC
And the original quirk is only correct for (and only matches the)
Cherry Trail SoC + TI PMIC model.
The Bay Trail SoC + AXP288 PMIC model has different DMI strings, has
the external EC interrupt on a different GPIO pin and only needs to ignore
wakeups on the EC interrupt, the INT0002 device works fine on this model.
This commit adds an extra DMI based quirk for the HP x2 10 BYT + AXP288
model, ignoring wakeups for ACPI GPIO events on the EC interrupt pin
on this model. This fixes spurious wakeups from suspend on this model.
Fixes: aa23ca3d98 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200302111225.6641-3-hdegoede@redhat.com
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ccb21f551 upstream.
Commit aa23ca3d98 ("gpiolib: acpi: Add honor_wakeup module-option +
quirk mechanism") was added to deal with spurious wakeups on one specific
model of the HP x2 10 series.
The approach taken there was to add a bool controlling wakeup support for
all ACPI GPIO events. This was sufficient for the specific HP x2 10 model
the commit was trying to fix, but in the mean time other models have
turned up which need a similar workaround to avoid spurious wakeups from
suspend, but only for one of the pins on which the ACPI tables request
ACPI GPIO events.
Since the honor_wakeup option was added to be able to ignore wake events,
the name was perhaps not the best, this commit renames it to ignore_wake
and changes it to a string with the following format:
gpiolib_acpi.ignore_wake=controller@pin[,controller@pin[,...]]
This allows working around spurious wakeup issues on a per pin basis.
This commit also reworks the existing quirk for the HP x2 10 so that
it functions as before.
Note:
-This removes the honor_wakeup parameter. This has only been upstream for
a short time and to the best of my knowledge there are no users using
this module parameter.
-The controller@pin[,controller@pin[,...]] syntax is based on an existing
kernel module parameter using the same controller@pin format. That version
uses ';' as separator, but in practice that is problematic because grub2
cannot handle this without taking special care to escape the ';', so here
we are using a ',' as separator instead which does not have this issue.
Fixes: aa23ca3d98 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200302111225.6641-2-hdegoede@redhat.com
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit efaa87fa09 upstream.
Commit aa23ca3d98 ("gpiolib: acpi: Add honor_wakeup module-option +
quirk mechanism") added a quirk for some models of the HP x2 10 series.
There are 2 issues with the comment describing the quirk:
1) The comment claims the DMI quirk applies to all Cherry Trail based HP x2
10 models. In the mean time I have learned that there are at least 3
models of the HP x2 10 models:
Bay Trail SoC + AXP288 PMIC
Cherry Trail SoC + AXP288 PMIC
Cherry Trail SoC + TI PMIC
And this quirk's DMI matches only match the Cherry Trail SoC + TI PMIC
SoC, which is good because we want a slightly different quirk for the
others. This commit updates the comment to make it clear that the quirk
is only for the Cherry Trail SoC + TI PMIC models.
2) The comment says that it is ok to disable wakeup on all ACPI GPIO event
handlers, because there is only the one for the embedded-controller
events. This is not true, there also is a handler for the special
INT0002 device which is related to USB wakeups. We need to also disable
wakeups on that one because the device turns of the USB-keyboard built
into the dock when closing the lid. The XHCI controller takes a while
to notice this, so it only notices it when already suspended, causing
a spurious wakeup because of this. So disabling wakeup on all handlers
is the right thing to do, but not because there only is the one handler
for the EC events. This commit updates the comment to correctly reflect
this.
Fixes: aa23ca3d98 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200302111225.6641-1-hdegoede@redhat.com
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8380ce4790 upstream.
Depending on CONFIG_VMAP_STACK and the THREAD_SIZE / PAGE_SIZE ratio the
space for task stacks can be allocated using __vmalloc_node_range(),
alloc_pages_node() and kmem_cache_alloc_node().
In the first and the second cases page->mem_cgroup pointer is set, but
in the third it's not: memcg membership of a slab page should be
determined using the memcg_from_slab_page() function, which looks at
page->slab_cache->memcg_params.memcg . In this case, using
mod_memcg_page_state() (as in account_kernel_stack()) is incorrect:
page->mem_cgroup pointer is NULL even for pages charged to a non-root
memory cgroup.
It can lead to kernel_stack per-memcg counters permanently showing 0 on
some architectures (depending on the configuration).
In order to fix it, let's introduce a mod_memcg_obj_state() helper,
which takes a pointer to a kernel object as a first argument, uses
mem_cgroup_from_obj() to get a RCU-protected memcg pointer and calls
mod_memcg_state(). It allows to handle all possible configurations
(CONFIG_VMAP_STACK and various THREAD_SIZE/PAGE_SIZE values) without
spilling any memcg/kmem specifics into fork.c .
Note: This is a special version of the patch created for stable
backports. It contains code from the following two patches:
- mm: memcg/slab: introduce mem_cgroup_from_obj()
- mm: fork: fix kernel_stack memcg stats for various stack implementations
[guro@fb.com: introduce mem_cgroup_from_obj()]
Link: http://lkml.kernel.org/r/20200324004221.GA36662@carbon.dhcp.thefacebook.com
Fixes: 4d96ba3530 ("mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages")
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200303233550.251375-1-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b943f045a9 upstream.
Fix the crash like this:
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc000000000c3447c
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
CPU: 11 PID: 7519 Comm: lt-ndctl Not tainted 5.6.0-rc7-autotest #1
...
NIP [c000000000c3447c] vmemmap_populated+0x98/0xc0
LR [c000000000088354] vmemmap_free+0x144/0x320
Call Trace:
section_deactivate+0x220/0x240
__remove_pages+0x118/0x170
arch_remove_memory+0x3c/0x150
memunmap_pages+0x1cc/0x2f0
devm_action_release+0x30/0x50
release_nodes+0x2f8/0x3e0
device_release_driver_internal+0x168/0x270
unbind_store+0x130/0x170
drv_attr_store+0x44/0x60
sysfs_kf_write+0x68/0x80
kernfs_fop_write+0x100/0x290
__vfs_write+0x3c/0x70
vfs_write+0xcc/0x240
ksys_write+0x7c/0x140
system_call+0x5c/0x68
The crash is due to NULL dereference at
test_bit(idx, ms->usage->subsection_map);
due to ms->usage = NULL in pfn_section_valid()
With commit d41e2f3bd5 ("mm/hotplug: fix hot remove failure in
SPARSEMEM|!VMEMMAP case") section_mem_map is set to NULL after
depopulate_section_mem(). This was done so that pfn_page() can work
correctly with kernel config that disables SPARSEMEM_VMEMMAP. With that
config pfn_to_page does
__section_mem_map_addr(__sec) + __pfn;
where
static inline struct page *__section_mem_map_addr(struct mem_section *section)
{
unsigned long map = section->section_mem_map;
map &= SECTION_MAP_MASK;
return (struct page *)map;
}
Now with SPASEMEM_VMEMAP enabled, mem_section->usage->subsection_map is
used to check the pfn validity (pfn_valid()). Since section_deactivate
release mem_section->usage if a section is fully deactivated,
pfn_valid() check after a subsection_deactivate cause a kernel crash.
static inline int pfn_valid(unsigned long pfn)
{
...
return early_section(ms) || pfn_section_valid(ms, pfn);
}
where
static inline int pfn_section_valid(struct mem_section *ms, unsigned long pfn)
{
int idx = subsection_map_index(pfn);
return test_bit(idx, ms->usage->subsection_map);
}
Avoid this by clearing SECTION_HAS_MEM_MAP when mem_section->usage is
freed. For architectures like ppc64 where large pages are used for
vmmemap mapping (16MB), a specific vmemmap mapping can cover multiple
sections. Hence before a vmemmap mapping page can be freed, the kernel
needs to make sure there are no valid sections within that mapping.
Clearing the section valid bit before depopulate_section_memap enables
this.
[aneesh.kumar@linux.ibm.com: add comment]
Link: http://lkml.kernel.org/r/20200326133235.343616-1-aneesh.kumar@linux.ibm.comLink: http://lkml.kernel.org/r/20200325031914.107660-1-aneesh.kumar@linux.ibm.com
Fixes: d41e2f3bd5 ("mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53cdc1cb29 upstream.
We see multiple issues with the implementation/interface to compute
whether a memory block can be offlined (exposed via
/sys/devices/system/memory/memoryX/removable) and would like to simplify
it (remove the implementation).
1. It runs basically lockless. While this might be good for performance,
we see possible races with memory offlining that will require at
least some sort of locking to fix.
2. Nowadays, more false positives are possible. No arch-specific checks
are performed that validate if memory offlining will not be denied
right away (and such check will require locking). For example, arm64
won't allow to offline any memory block that was added during boot -
which will imply a very high error rate. Other archs have other
constraints.
3. The interface is inherently racy. E.g., if a memory block is detected
to be removable (and was not a false positive at that time), there is
still no guarantee that offlining will actually succeed. So any
caller already has to deal with false positives.
4. It is unclear which performance benefit this interface actually
provides. The introducing commit 5c755e9fd8 ("memory-hotplug: add
sysfs removable attribute for hotplug memory remove") mentioned
"A user-level agent must be able to identify which sections
of memory are likely to be removable before attempting the
potentially expensive operation."
However, no actual performance comparison was included.
Known users:
- lsmem: Will group memory blocks based on the "removable" property. [1]
- chmem: Indirect user. It has a RANGE mode where one can specify
removable ranges identified via lsmem to be offlined. However,
it also has a "SIZE" mode, which allows a sysadmin to skip the
manual "identify removable blocks" step. [2]
- powerpc-utils: Uses the "removable" attribute to skip some memory
blocks right away when trying to find some to offline+remove.
However, with ballooning enabled, it already skips this
information completely (because it once resulted in many false
negatives). Therefore, the implementation can deal with false
positives properly already. [3]
According to Nathan Fontenot, DLPAR on powerpc is nowadays no longer
driven from userspace via the drmgr command (powerpc-utils). Nowadays
it's managed in the kernel - including onlining/offlining of memory
blocks - triggered by drmgr writing to /sys/kernel/dlpar. So the
affected legacy userspace handling is only active on old kernels. Only
very old versions of drmgr on a new kernel (unlikely) might execute
slower - totally acceptable.
With CONFIG_MEMORY_HOTREMOVE, always indicating "removable" should not
break any user space tool. We implement a very bad heuristic now.
Without CONFIG_MEMORY_HOTREMOVE we cannot offline anything, so report
"not removable" as before.
Original discussion can be found in [4] ("[PATCH RFC v1] mm:
is_mem_section_removable() overhaul").
Other users of is_mem_section_removable() will be removed next, so that
we can remove is_mem_section_removable() completely.
[1] http://man7.org/linux/man-pages/man1/lsmem.1.html
[2] http://man7.org/linux/man-pages/man8/chmem.8.html
[3] https://github.com/ibm-power-utilities/powerpc-utils
[4] https://lkml.kernel.org/r/20200117105759.27905-1-david@redhat.com
Also, this patch probably fixes a crash reported by Steve.
http://lkml.kernel.org/r/CAPcyv4jpdaNvJ67SkjyUJLBnBnXXQv686BiVW042g03FUmWLXw@mail.gmail.com
Reported-by: "Scargall, Steve" <steve.scargall@intel.com>
Suggested-by: Michal Hocko <mhocko@kernel.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Nathan Fontenot <ndfont@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Karel Zak <kzak@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200128093542.6908-1-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d795a90e2b upstream.
claim_swapfile() currently keeps the inode locked when it is successful,
or the file is already swapfile (with -EBUSY). And, on the other error
cases, it does not lock the inode.
This inconsistency of the lock state and return value is quite confusing
and actually causing a bad unlock balance as below in the "bad_swap"
section of __do_sys_swapon().
This commit fixes this issue by moving the inode_lock() and IS_SWAPFILE
check out of claim_swapfile(). The inode is unlocked in
"bad_swap_unlock_inode" section, so that the inode is ensured to be
unlocked at "bad_swap". Thus, error handling codes after the locking now
jumps to "bad_swap_unlock_inode" instead of "bad_swap".
=====================================
WARNING: bad unlock balance detected!
5.5.0-rc7+ #176 Not tainted
-------------------------------------
swapon/4294 is trying to release lock (&sb->s_type->i_mutex_key) at: __do_sys_swapon+0x94b/0x3550
but there are no more locks to release!
other info that might help us debug this:
no locks held by swapon/4294.
stack backtrace:
CPU: 5 PID: 4294 Comm: swapon Not tainted 5.5.0-rc7-BTRFS-ZNS+ #176
Hardware name: ASUS All Series/H87-PRO, BIOS 2102 07/29/2014
Call Trace:
dump_stack+0xa1/0xea
print_unlock_imbalance_bug.cold+0x114/0x123
lock_release+0x562/0xed0
up_write+0x2d/0x490
__do_sys_swapon+0x94b/0x3550
__x64_sys_swapon+0x54/0x80
do_syscall_64+0xa4/0x4b0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f15da0a0dc7
Fixes: 1638045c36 ("mm: set S_SWAPFILE on blockdev swap devices")
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Qais Youef <qais.yousef@arm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200206090132.154869-1-naohiro.aota@wdc.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0761a3017 upstream.
If we know that we have an encrypted link (based on having had
a key configured for TX in the past) then drop all data frames
in the key selection handler if there's no key anymore.
This fixes an issue with mac80211 internal TXQs - there we can
buffer frames for an encrypted link, but then if the key is no
longer there when they're dequeued, the frames are sent without
encryption. This happens if a station is disconnected while the
frames are still on the TXQ.
Detecting that a link should be encrypted based on a first key
having been configured for TX is fine as there are no use cases
for a connection going from with encryption to no encryption.
With extended key IDs, however, there is a case of having a key
configured for only decryption, so we can't just trigger this
behaviour on a key being configured.
Cc: stable@vger.kernel.org
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200326150855.6865c7f28a14.I9fb1d911b064262d33e33dfba730cdeef83926ca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0016d32017 upstream.
The new opmode notification used this attribute with a u8, when
it's documented as a u32 and indeed used in userspace as such,
it just happens to work on little-endian systems since userspace
isn't doing any strict size validation, and the u8 goes into the
lower byte. Fix this.
Cc: stable@vger.kernel.org
Fixes: 466b9936bf ("cfg80211: Add support to notify station's opmode change to userspace")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200325090531.be124f0a11c7.Iedbf4e197a85471ebd729b186d5365c0343bf7a8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea697a8bf5 upstream.
Some USB bridge devices will return a default set of characteristics during
initialization. And then, once an attached drive has spun up, substitute
the actual parameters reported by the drive. According to the SCSI spec,
the device should return a UNIT ATTENTION in case any reported parameters
change. But in this case the change is made silently after a small window
where default values are reported.
Commit a83da8a450 ("scsi: sd: Optimal I/O size should be a multiple of
physical block size") validated the reported optimal I/O size against the
physical block size to overcome problems with devices reporting nonsensical
transfer sizes. However, this validation did not account for the fact that
aforementioned devices will return default values during a brief window
during spin-up. The subsequent change in reported characteristics would
invalidate the checking that had previously been performed.
Unset a previously configured optimal I/O size should the sanity checking
fail on subsequent revalidate attempts.
Link: https://lore.kernel.org/r/33fb522e-4f61-1b76-914f-c9e6a3553c9b@gmail.com
Cc: Bryan Gurney <bgurney@redhat.com>
Cc: <stable@vger.kernel.org>
Reported-by: Bernhard Sulzer <micraft.b@gmail.com>
Tested-by: Bernhard Sulzer <micraft.b@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
