Pull x86 asm updates from Ingo Molnar:
"The main changes in this cycle were:
- Cross-arch changes to move the linker sections for NOTES and
EXCEPTION_TABLE into the RO_DATA area, where they belong on most
architectures. (Kees Cook)
- Switch the x86 linker fill byte from x90 (NOP) to 0xcc (INT3), to
trap jumps into the middle of those padding areas instead of
sliding execution. (Kees Cook)
- A thorough cleanup of symbol definitions within x86 assembler code.
The rather randomly named macros got streamlined around a
(hopefully) straightforward naming scheme:
SYM_START(name, linkage, align...)
SYM_END(name, sym_type)
SYM_FUNC_START(name)
SYM_FUNC_END(name)
SYM_CODE_START(name)
SYM_CODE_END(name)
SYM_DATA_START(name)
SYM_DATA_END(name)
etc - with about three times of these basic primitives with some
label, local symbol or attribute variant, expressed via postfixes.
No change in functionality intended. (Jiri Slaby)
- Misc other changes, cleanups and smaller fixes"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
x86/entry/64: Remove pointless jump in paranoid_exit
x86/entry/32: Remove unused resume_userspace label
x86/build/vdso: Remove meaningless CFLAGS_REMOVE_*.o
m68k: Convert missed RODATA to RO_DATA
x86/vmlinux: Use INT3 instead of NOP for linker fill bytes
x86/mm: Report actual image regions in /proc/iomem
x86/mm: Report which part of kernel image is freed
x86/mm: Remove redundant address-of operators on addresses
xtensa: Move EXCEPTION_TABLE to RO_DATA segment
powerpc: Move EXCEPTION_TABLE to RO_DATA segment
parisc: Move EXCEPTION_TABLE to RO_DATA segment
microblaze: Move EXCEPTION_TABLE to RO_DATA segment
ia64: Move EXCEPTION_TABLE to RO_DATA segment
h8300: Move EXCEPTION_TABLE to RO_DATA segment
c6x: Move EXCEPTION_TABLE to RO_DATA segment
arm64: Move EXCEPTION_TABLE to RO_DATA segment
alpha: Move EXCEPTION_TABLE to RO_DATA segment
x86/vmlinux: Move EXCEPTION_TABLE to RO_DATA segment
x86/vmlinux: Actually use _etext for the end of the text segment
vmlinux.lds.h: Allow EXCEPTION_TABLE to live in RO_DATA
...
This kselftest update for Linux 5.5-rc1 adds KUnit, a lightweight unit
testing and mocking framework for the Linux kernel from Brendan Higgins.
KUnit is not an end-to-end testing framework. It is currently supported
on UML and sub-systems can write unit tests and run them in UML env.
KUnit documentation is included in this update.
In addition, this Kunit update adds 3 new kunit tests:
- kunit test for proc sysctl from Iurii Zaikin
- kunit test for the 'list' doubly linked list from David Gow
- ext4 kunit test for decoding extended timestamps from Iurii Zaikin
In the future KUnit will be linked to Kselftest framework to provide
a way to trigger KUnit tests from user-space.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl3YfBQACgkQCwJExA0N
QxzTjxAAiFhaDMhlpLhn1DpIUNvfKrIgDjJgajQAyMMs6TJK3OrD6J4WbpVD7wGo
aqF9l6o64sY18JAo3s00j6AcAmVwNH7qzEEuzIQPjJvQ8C4sCWL3esEP4JHgFb2F
snlSn5KjSsdC1D9N7uQIhgW76xPSyDrTwWQpglvmB9TwmJVBIl9zhu+unp73ufFJ
N+ieDg8A6W/wDGYSq5JBSkJbuI0gL+daNwUYzxEEZIskndhpovOc82WAldECRm6x
TfI0u39zTbrEO0DHgmYpyGbTN8TB2mXjH5HMjwg+KbHfKVTKKGvTK7XFs8mWGQpO
n2meypZuwuIsRPOPcAVs+Gt2dc0jFODJVIV1EzA0WSv6TEdPqyhM/d13tHdCqjm9
ic5wQ/hQQNEB1Dvg5ereXBaGGaoqP95y61ZpCS9vCXFXH+28E/B63Ebfs2IBIuqS
Jv2KcoxabyZq3uGdjnn+mD7IM8rkvscRP4Ba31nXRgJIYDHAzqe7APN7y3on4NGx
1q7lBlA3XZZ8qgo0zpLST20ck/qaL3tk4k8E1f8emh6CuyrCWtazgrWkMIlyEX0O
8nre3uEAF9xUzB4+gZK4YmelN9Bld3Uv7Ippt1zTCiQ0FkEABQIMUrTZygy7Wfg6
6qi4dk8frWW4Kt63gOXsMxr9FWTqDk+Ys4GPAVDVm1d0dzERn8k=
=0zEe
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.5-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest KUnit support gtom Shuah Khan:
"This adds KUnit, a lightweight unit testing and mocking framework for
the Linux kernel from Brendan Higgins.
KUnit is not an end-to-end testing framework. It is currently
supported on UML and sub-systems can write unit tests and run them in
UML env. KUnit documentation is included in this update.
In addition, this Kunit update adds 3 new kunit tests:
- proc sysctl test from Iurii Zaikin
- the 'list' doubly linked list test from David Gow
- ext4 tests for decoding extended timestamps from Iurii Zaikin
In the future KUnit will be linked to Kselftest framework to provide a
way to trigger KUnit tests from user-space"
* tag 'linux-kselftest-5.5-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (23 commits)
lib/list-test: add a test for the 'list' doubly linked list
ext4: add kunit test for decoding extended timestamps
Documentation: kunit: Fix verification command
kunit: Fix '--build_dir' option
kunit: fix failure to build without printk
MAINTAINERS: add proc sysctl KUnit test to PROC SYSCTL section
kernel/sysctl-test: Add null pointer test for sysctl.c:proc_dointvec()
MAINTAINERS: add entry for KUnit the unit testing framework
Documentation: kunit: add documentation for KUnit
kunit: defconfig: add defconfigs for building KUnit tests
kunit: tool: add Python wrappers for running KUnit tests
kunit: test: add tests for KUnit managed resources
kunit: test: add the concept of assertions
kunit: test: add tests for kunit test abort
kunit: test: add support for test abort
objtool: add kunit_try_catch_throw to the noreturn list
kunit: test: add initial tests
lib: enable building KUnit in lib/
kunit: test: add the concept of expectations
kunit: test: add assertion printing library
...
Add defconfig for UML and a fragment that can be used to configure other
architectures for building KUnit tests. Add option to kunit_tool to use
a defconfig to create the kunitconfig.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The naming of pgtable_page_{ctor,dtor}() seems to have confused a few
people, and until recently arm64 used these erroneously/pointlessly for
other levels of page table.
To make it incredibly clear that these only apply to the PTE level, and to
align with the naming of pgtable_pmd_page_{ctor,dtor}(), let's rename them
to pgtable_pte_page_{ctor,dtor}().
These changes were generated with the following shell script:
----
git grep -lw 'pgtable_page_.tor' | while read FILE; do
sed -i '{s/pgtable_page_ctor/pgtable_pte_page_ctor/}' $FILE;
sed -i '{s/pgtable_page_dtor/pgtable_pte_page_dtor/}' $FILE;
done
----
... with the documentation re-flowed to remain under 80 columns, and
whitespace fixed up in macros to keep backslashes aligned.
There should be no functional change as a result of this patch.
Link: http://lkml.kernel.org/r/20190722141133.3116-1-mark.rutland@arm.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both pgtable_cache_init() and pgd_cache_init() are used to initialize kmem
cache for page table allocations on several architectures that do not use
PAGE_SIZE tables for one or more levels of the page table hierarchy.
Most architectures do not implement these functions and use __weak default
NOP implementation of pgd_cache_init(). Since there is no such default
for pgtable_cache_init(), its empty stub is duplicated among most
architectures.
Rename the definitions of pgd_cache_init() to pgtable_cache_init() and
drop empty stubs of pgtable_cache_init().
Link: http://lkml.kernel.org/r/1566457046-22637-1-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Will Deacon <will@kernel.org> [arm64]
Acked-by: Thomas Gleixner <tglx@linutronix.de> [x86]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: remove quicklist page table caches".
A while ago Nicholas proposed to remove quicklist page table caches [1].
I've rebased his patch on the curren upstream and switched ia64 and sh to
use generic versions of PTE allocation.
[1] https://lore.kernel.org/linux-mm/20190711030339.20892-1-npiggin@gmail.com
This patch (of 3):
Remove page table allocator "quicklists". These have been around for a
long time, but have not got much traction in the last decade and are only
used on ia64 and sh architectures.
The numbers in the initial commit look interesting but probably don't
apply anymore. If anybody wants to resurrect this it's in the git
history, but it's unhelpful to have this code and divergent allocator
behaviour for minor archs.
Also it might be better to instead make more general improvements to page
allocator if this is still so slow.
Link: http://lkml.kernel.org/r/1565250728-21721-2-git-send-email-rppt@linux.ibm.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- virtio support
- Fixes for our new time travel mode
- Various improvements to make lockdep and kasan work better
- SPDX header updates
-----BEGIN PGP SIGNATURE-----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=oxpp
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- virtio support
- fixes for our new time travel mode
- various improvements to make lockdep and kasan work better
- SPDX header updates
* tag 'for-linus-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (25 commits)
um: irq: Fix LAST_IRQ usage in init_IRQ()
um: Add SPDX headers for files in arch/um/include
um: Add SPDX headers for files in arch/um/os-Linux
um: Add SPDX headers to files in arch/um/kernel/
um: Add SPDX headers for files in arch/um/drivers
um: virtio: Implement VHOST_USER_PROTOCOL_F_REPLY_ACK
um: virtio: Implement VHOST_USER_PROTOCOL_F_SLAVE_REQ
um: drivers: Add virtio vhost-user driver
um: Use real DMA barriers
um: Don't use generic barrier.h
um: time-travel: Restrict time update in IRQ handler
um: time-travel: Fix periodic timers
um: Enable CONFIG_CONSTRUCTORS
um: Place (soft)irq text with macros
um: Fix VDSO compiler warning
um: Implement TRACE_IRQFLAGS_SUPPORT
um: Remove misleading #define ARCh_IRQ_ENABLED
um: Avoid using uninitialized regs
um: Remove sig_info[SIGALRM]
um: Error handling fixes in vector drivers
...
- add modpost warn exported symbols marked as 'static' because 'static'
and EXPORT_SYMBOL is an odd combination
- break the build early if gold linker is used
- optimize the Bison rule to produce .c and .h files by a single
pattern rule
- handle PREEMPT_RT in the module vermagic and UTS_VERSION
- warn CONFIG options leaked to the user-space except existing ones
- make single targets work properly
- rebuild modules when module linker scripts are updated
- split the module final link stage into scripts/Makefile.modfinal
- fix the missed error code in merge_config.sh
- improve the error message displayed on the attempt of the O= build
in unclean source tree
- remove 'clean-dirs' syntax
- disable -Wimplicit-fallthrough warning for Clang
- add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC
- remove ARCH_{CPP,A,C}FLAGS variables
- add $(BASH) to run bash scripts
- change *CFLAGS_<basetarget>.o to take the relative path to $(obj)
instead of the basename
- stop suppressing Clang's -Wunused-function warnings when W=1
- fix linux/export.h to avoid genksyms calculating CRC of trimmed
exported symbols
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=VGqV
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- add modpost warn exported symbols marked as 'static' because 'static'
and EXPORT_SYMBOL is an odd combination
- break the build early if gold linker is used
- optimize the Bison rule to produce .c and .h files by a single
pattern rule
- handle PREEMPT_RT in the module vermagic and UTS_VERSION
- warn CONFIG options leaked to the user-space except existing ones
- make single targets work properly
- rebuild modules when module linker scripts are updated
- split the module final link stage into scripts/Makefile.modfinal
- fix the missed error code in merge_config.sh
- improve the error message displayed on the attempt of the O= build in
unclean source tree
- remove 'clean-dirs' syntax
- disable -Wimplicit-fallthrough warning for Clang
- add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC
- remove ARCH_{CPP,A,C}FLAGS variables
- add $(BASH) to run bash scripts
- change *CFLAGS_<basetarget>.o to take the relative path to $(obj)
instead of the basename
- stop suppressing Clang's -Wunused-function warnings when W=1
- fix linux/export.h to avoid genksyms calculating CRC of trimmed
exported symbols
- misc cleanups
* tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits)
genksyms: convert to SPDX License Identifier for lex.l and parse.y
modpost: use __section in the output to *.mod.c
modpost: use MODULE_INFO() for __module_depends
export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols
export.h: remove defined(__KERNEL__), which is no longer needed
kbuild: allow Clang to find unused static inline functions for W=1 build
kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN
kbuild: refactor scripts/Makefile.extrawarn
merge_config.sh: ignore unwanted grep errors
kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj)
modpost: add NOFAIL to strndup
modpost: add guid_t type definition
kbuild: add $(BASH) to run scripts with bash-extension
kbuild: remove ARCH_{CPP,A,C}FLAGS
kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC
kbuild: Do not enable -Wimplicit-fallthrough for clang for now
kbuild: clean up subdir-ymn calculation in Makefile.clean
kbuild: remove unneeded '+' marker from cmd_clean
kbuild: remove clean-dirs syntax
kbuild: check clean srctree even earlier
...
LAST_IRQ was used incorrectly in init_IRQ.
Commit 09ccf0364c forgot to update the for loop.
Fix this.
Fixes: 49da7e64f3 ("High Performance UML Vector Network Driver")
Fixes: 09ccf0364c ("um: Fix off by one error in IRQ enumeration")
Signed-off-by: Erel Geron <erelx.geron@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
Convert files to use SPDX header. All files are licensed under the GPLv2.
Signed-off-by: Alex Dewar <alex.dewar@gmx.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
Convert files to use SPDX header. All files are licensed under the GPLv2.
Signed-off-by: Alex Dewar <alex.dewar@gmx.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
Convert files to use SPDX header. All files are licensed under the
GPLv2.
Signed-off-by: Alex Dewar <alex.dewar@gmx.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
Convert files to use SPDX header. All files are licensed under the GPLv2.
Signed-off-by: Alex Dewar <alex.dewar@gmx.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
Implement the VHOST_USER_PROTOCOL_F_REPLY_ACK extension for both
slave requests (previous patch) where we have to reply and our
own requests where it helps understand if the slave failed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Implement the communication channel for the device to notify
us of some events, and notably implement the handling of the
config updates needed for the combination of this feature
and VHOST_USER_PROTOCOL_F_CONFIG.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This module allows virtio devices to be used over a vhost-user socket.
Signed-off-by: Erel Geron <erelx.geron@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
UML has its own platform-specific barrier.h under arch/x86/um/,
which should get used. Fix the build system to use it, and then
fix the barrier.h to actually compile.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
We currently do the time updates in the timer handler, even if
we just call the timer handler ourselves. In basic mode we must
in fact do it there since otherwise the OS timer signal won't
move time forward, but in inf-cpu mode we don't need to, and
it's harder to understand.
Restrict the update there to basic mode, adding a comment, and
do it before calling the timer_handler() in inf-cpu mode.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Periodic timers are broken, because the also only fire once.
As it happens, Linux doesn't care because it only sets the
timer to periodic very briefly during boot, and then switches
it only between one-shot and off later.
Nevertheless, fix the logic (we shouldn't even be looking at
time_travel_timer_expiry unless the timer is enabled) and
change the code to fire the timer periodically in periodic
mode, in case it ever gets used in the future.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
We do need to call the constructors for *modules*, and
at least for KASAN in the future, we must call even the
kernel constructors only later when the kernel has been
initialized.
Instead of relying on libc to call them, emit an empty
section for libc and let the kernel's CONSTRUCTORS code
do the rest of the job.
Tested that it indeed doesn't work in modules, and does
work after the fixes in both, with a few functions with
__attribute__((constructor)) in both dynamic and static
builds.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Otherwise it gets placed without the start/end markers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
UML enables TRACE_IRQFLAGS_SUPPORT but doesn't actually implement
it. It seems to have been added for lockdep support, but that can't
actually really work well without IRQ flags tracing, as is also
very noisily reported when enabling CONFIG_DEBUG_LOCKDEP.
Implement it now.
Fixes: 711553efa5 ("[PATCH] uml: declare in Kconfig our partial LOCKDEP support")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Due to the typo in the name, this can never be used, but
it's also misleading because our value for enabled/disabled
is always just 0/1, not an actual signal mask.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
In timer_real_alarm_handler(), regs is only initialized if
the context argument is non-NULL, also initialize in the
other case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
This entry is misleading, the actual signal handler is
another one that never uses sig_info.
Also remove the SIGALRM if inside sig_handler() for the
same reason.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
With the addition of bess support which uses connection
oriented SEQPACKET sockets the vector routines can now
encounter a "remote end closed the connection" scenario.
This adds handling code to detect it in the TX path and
the legacy RX path. There is no way to detect it in the
vector RX path because that can legitimately return 0
even if the remote end has not closed the connection. As
a result the detection is delayed until the first TX
event after the close.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Adds a sanity check to the parsing of mtu command line param
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This adds support for the UNIX domain socket transports in
general and implements a Netsys::BESS compatible transport
interface.
For details on Netsys::BESS see https://github.com/NetSys/bess
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
1. Adds legacy tap support
2. Renames tap+raw as hybrid
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Fix an off-by-one in IRQ enumeration
Fixes: 49da7e64f3 ("High Performance UML Vector Network Driver")
Reported by: Dana Johnson <djohns042@gmail.com>
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Unfortunately, my build fix for when time travel mode isn't
enabled broke time travel mode, because I forgot that we need
to use the timer time after the timer has been marked disabled,
and thus need to leave the time stored instead of zeroing it.
Fix that by splitting the inline into two, so we can call only
the _mode() one in the relevant code path.
Fixes: b482e48d29 ("um: fix build without CONFIG_UML_TIME_TRAVEL_SUPPORT")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Add CONFIG_ASM_MODVERSIONS. This allows to remove one if-conditional
nesting in scripts/Makefile.build.
scripts/Makefile.build is run every time Kbuild descends into a
sub-directory. So, I want to avoid $(wildcard ...) evaluation
where possible although computing $(wildcard ...) is so cheap that
it may not make measurable performance difference.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
- A new timer mode, time travel, for testing with UML
- Many bugixes/improvements for the serial line driver
- Various bugfixes
-----BEGIN PGP SIGNATURE-----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=xxGu
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- A new timer mode, time travel, for testing with UML
- Many bugixes/improvements for the serial line driver
- Various bugfixes
* tag 'for-linus-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: fix build without CONFIG_UML_TIME_TRAVEL_SUPPORT
um: Fix kcov crash during startup
um: configs: Remove useless UEVENT_HELPER_PATH
um: Support time travel mode
um: Pass nsecs to os timer functions
um: Remove drivers/ssl.h
um: Don't garbage collect in deactivate_all_fds()
um: Silence lockdep complaint about mmap_sem
um: Remove locking in deactivate_all_fds()
um: Timer code cleanup
um: fix os_timer_one_shot()
um: Fix IRQ controller regression on console read
- remove headers_{install,check}_all targets
- remove unreasonable 'depends on !UML' from CONFIG_SAMPLES
- re-implement 'make headers_install' more cleanly
- add new header-test-y syntax to compile-test headers
- compile-test exported headers to ensure they are compilable in
user-space
- compile-test headers under include/ to ensure they are self-contained
- remove -Waggregate-return, -Wno-uninitialized, -Wno-unused-value flags
- add -Werror=unknown-warning-option for Clang
- add 128-bit built-in types support to genksyms
- fix missed rebuild of modules.builtin
- propagate 'No space left on device' error in fixdep to Make
- allow Clang to use its integrated assembler
- improve some coccinelle scripts
- add a new flag KBUILD_ABS_SRCTREE to request Kbuild to use absolute
path for $(srctree).
- do not ignore errors when compression utility is missing
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=E2Rz
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- remove headers_{install,check}_all targets
- remove unreasonable 'depends on !UML' from CONFIG_SAMPLES
- re-implement 'make headers_install' more cleanly
- add new header-test-y syntax to compile-test headers
- compile-test exported headers to ensure they are compilable in
user-space
- compile-test headers under include/ to ensure they are self-contained
- remove -Waggregate-return, -Wno-uninitialized, -Wno-unused-value
flags
- add -Werror=unknown-warning-option for Clang
- add 128-bit built-in types support to genksyms
- fix missed rebuild of modules.builtin
- propagate 'No space left on device' error in fixdep to Make
- allow Clang to use its integrated assembler
- improve some coccinelle scripts
- add a new flag KBUILD_ABS_SRCTREE to request Kbuild to use absolute
path for $(srctree).
- do not ignore errors when compression utility is missing
- misc cleanups
* tag 'kbuild-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (49 commits)
kbuild: use -- separater intead of $(filter-out ...) for cc-cross-prefix
kbuild: Inform user to pass ARCH= for make mrproper
kbuild: fix compression errors getting ignored
kbuild: add a flag to force absolute path for srctree
kbuild: replace KBUILD_SRCTREE with boolean building_out_of_srctree
kbuild: remove src and obj from the top Makefile
scripts/tags.sh: remove unused environment variables from comments
scripts/tags.sh: drop SUBARCH support for ARM
kbuild: compile-test kernel headers to ensure they are self-contained
kheaders: include only headers into kheaders_data.tar.xz
kheaders: remove meaningless -R option of 'ls'
kbuild: support header-test-pattern-y
kbuild: do not create wrappers for header-test-y
kbuild: compile-test exported headers to ensure they are self-contained
init/Kconfig: add CONFIG_CC_CAN_LINK
kallsyms: exclude kasan local symbols on s390
kbuild: add more hints about SUBDIRS replacement
coccinelle: api/stream_open: treat all wait_.*() calls as blocking
coccinelle: put_device: Add a cast to an expression for an assignment
coccinelle: put_device: Adjust a message construction
...
um allocates PTE pages with __get_free_page() and uses
GFP_KERNEL | __GFP_ZERO for the allocations.
Switch it to the generic version that does exactly the same thing for the
kernel page tables and adds __GFP_ACCOUNT for the user PTEs.
The pte_free() and pte_free_kernel() versions are identical to the generic
ones and can be simply dropped.
Link: http://lkml.kernel.org/r/1557296232-15361-14-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Guo Ren <ren_guo@c-sky.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sam Creasey <sammy@sammy.net>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull force_sig() argument change from Eric Biederman:
"A source of error over the years has been that force_sig has taken a
task parameter when it is only safe to use force_sig with the current
task.
The force_sig function is built for delivering synchronous signals
such as SIGSEGV where the userspace application caused a synchronous
fault (such as a page fault) and the kernel responded with a signal.
Because the name force_sig does not make this clear, and because the
force_sig takes a task parameter the function force_sig has been
abused for sending other kinds of signals over the years. Slowly those
have been fixed when the oopses have been tracked down.
This set of changes fixes the remaining abusers of force_sig and
carefully rips out the task parameter from force_sig and friends
making this kind of error almost impossible in the future"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
signal: Remove the signal number and task parameters from force_sig_info
signal: Factor force_sig_info_to_task out of force_sig_info
signal: Generate the siginfo in force_sig
signal: Move the computation of force into send_signal and correct it.
signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
signal: Remove the task parameter from force_sig_fault
signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
signal: Explicitly call force_sig_fault on current
signal/unicore32: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from ptrace_break
signal/nds32: Remove tsk parameter from send_sigtrap
signal/riscv: Remove tsk parameter from do_trap
signal/sh: Remove tsk parameter from force_sig_info_fault
signal/um: Remove task parameter from send_sigtrap
signal/x86: Remove task parameter from send_sigtrap
signal: Remove task parameter from force_sig_mceerr
signal: Remove task parameter from force_sig
signal: Remove task parameter from force_sigsegv
...
When CONFIG_UML_TIME_TRAVEL_SUPPORT isn't set, the build was broken.
Fix this.
Fixes: 065038706f ("um: Support time travel mode")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Kcov fails to start when compiled with kcov. Disable KCOV on
arch/uml/kernel/skas.
$ gdb -q -ex r ./vmlinux
Program received signal SIGSEGV, Segmentation fault.
check_kcov_mode (t=<>, needed_mode=<>) at kernel/kcov.c:70
70 mode = READ_ONCE(t->kcov_mode);
Signed-off-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a57 ("driver: base: Disable
CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
made default to 'n',
2. It is not recommended (help message: "This should not be used today
[...] creates a high system load") and was kept only for ancient
userland,
3. Certain userland specifically requests it to be disabled (systemd
README: "Legacy hotplug slows down the system and confuses udev").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Richard Weinberger <richard@nod.at>
Sometimes it can be useful to run with "time travel" inside the
UML instance, for example for testing. For example, some tests
for the wireless subsystem and userspace are based on hwsim, a
virtual wireless adapter. Some tests can take a long time to
run because they e.g. wait for 120 seconds to elapse for some
regulatory checks. This obviously goes faster if it need not
actually wait that long, but time inside the test environment
just "bumps up" when there's nothing to do.
Add CONFIG_UML_TIME_TRAVEL_SUPPORT to enable code to support
such modes at runtime, selected on the command line:
* just "time-travel", in which time inside the UML instance
can move faster than real time, if there's nothing to do
* "time-travel=inf-cpu" in which time also moves slower and
any CPU processing takes no time at all, which allows to
implement consistent behaviour regardless of host CPU load
(or speed) or debug overhead.
An additional "time-travel-start=<seconds>" parameter is also
supported in this case to start the wall clock at this time
(in unix epoch).
With this enabled, the test mentioned above goes from a runtime
of about 140 seconds (with startup overhead and all) to being
CPU bound and finishing in 15 seconds (on my slow laptop).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This makes the code clearer and lets the time travel patch have
the actual time used for these functions in just one place.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This file just contains two unused prototypes, remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
My previous commit didn't actually address the whole issue with
lockdep shutdown, I had another local modification that disabled
lockdep but that wasn't sufficient alone, so had to do the other
change.
Another issue remained though - during kfree() we acquire locks
and lockdep tries to annotate those with exactly the same issue
in the other patch - we no longer have "current".
So, just remove the garbage collection. There's no value in it
anyway since we're going to shut down anyway and marking a slab
object as free is now not very useful anymore.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
When we get into activate_mm(), lockdep complains that we're doing
something strange:
WARNING: possible circular locking dependency detected
5.1.0-10252-gb00152307319-dirty #121 Not tainted
------------------------------------------------------
inside.sh/366 is trying to acquire lock:
(____ptrval____) (&(&p->alloc_lock)->rlock){+.+.}, at: flush_old_exec+0x703/0x8d7
but task is already holding lock:
(____ptrval____) (&mm->mmap_sem){++++}, at: flush_old_exec+0x6c5/0x8d7
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&mm->mmap_sem){++++}:
[...]
__lock_acquire+0x12ab/0x139f
lock_acquire+0x155/0x18e
down_write+0x3f/0x98
flush_old_exec+0x748/0x8d7
load_elf_binary+0x2ca/0xddb
[...]
-> #0 (&(&p->alloc_lock)->rlock){+.+.}:
[...]
__lock_acquire+0x12ab/0x139f
lock_acquire+0x155/0x18e
_raw_spin_lock+0x30/0x83
flush_old_exec+0x703/0x8d7
load_elf_binary+0x2ca/0xddb
[...]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&mm->mmap_sem);
lock(&(&p->alloc_lock)->rlock);
lock(&mm->mmap_sem);
lock(&(&p->alloc_lock)->rlock);
*** DEADLOCK ***
2 locks held by inside.sh/366:
#0: (____ptrval____) (&sig->cred_guard_mutex){+.+.}, at: __do_execve_file+0x12d/0x869
#1: (____ptrval____) (&mm->mmap_sem){++++}, at: flush_old_exec+0x6c5/0x8d7
stack backtrace:
CPU: 0 PID: 366 Comm: inside.sh Not tainted 5.1.0-10252-gb00152307319-dirty #121
Stack:
[...]
Call Trace:
[<600420de>] show_stack+0x13b/0x155
[<6048906b>] dump_stack+0x2a/0x2c
[<6009ae64>] print_circular_bug+0x332/0x343
[<6009c5c6>] check_prev_add+0x669/0xdad
[<600a06b4>] __lock_acquire+0x12ab/0x139f
[<6009f3d0>] lock_acquire+0x155/0x18e
[<604a07e0>] _raw_spin_lock+0x30/0x83
[<60151e6a>] flush_old_exec+0x703/0x8d7
[<601a8eb8>] load_elf_binary+0x2ca/0xddb
[...]
I think it's because in exec_mmap() we have
down_read(&old_mm->mmap_sem);
...
task_lock(tsk);
...
activate_mm(active_mm, mm);
(which does down_write(&mm->mmap_sem))
I'm not really sure why lockdep throws in the whole knowledge
about the task lock, but it seems that old_mm and mm shouldn't
ever be the same (and it doesn't deadlock) so tell lockdep that
they're different.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Not only does the locking contradict the comment, and as
the comment says is pointless and actually harmful (all
the actual OS threads have exited already), but it also
causes crashes when lockdep is enabled, because calling
into the spinlock calls into lockdep, which then tries
to determine the current task, which no longer exists.
Remove the locking to let UML shut down cleanly in case
lockdep is enabled.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
