mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 12:28:41 +08:00
1d80d57ffc
33438 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
David S. Miller
|
21705c7719 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pable Neira Ayuso says: ==================== The following patchset contains Netfilter fixes for net: 1) Increase timeout to 120 seconds for netfilter selftests to fix nftables transaction tests, from Florian Westphal. 2) Fix overflow in bitmap_ip_create() due to integer arithmetics in a 64-bit bitmask, from Gavrilov Ilia. 3) Fix incorrect arithmetics in nft_payload with double-tagged vlan matching. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Matthieu Baerts
|
4656d72c1e |
selftests: mptcp: userspace: validate v4-v6 subflows mix
MPTCP protocol supports having subflows in both IPv4 and IPv6. In Linux, it is possible to have that if the MPTCP socket has been created with AF_INET6 family without the IPV6_V6ONLY option. Here, a new IPv4 subflow is being added to the initial IPv6 connection, then being removed using Netlink commands. Cc: stable@vger.kernel.org # v5.19+ Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Linus Torvalds
|
d9fc151172 |
Including fixes from rxrpc.
Current release - regressions:
- rxrpc:
- only disconnect calls in the I/O thread
- move client call connection to the I/O thread
- fix incoming call setup race
- eth: mlx5:
- restore pkt rate policing support
- fix memory leak on updating vport counters
Previous releases - regressions:
- gro: take care of DODGY packets
- ipv6: deduct extension header length in rawv6_push_pending_frames
- tipc: fix unexpected link reset due to discovery messages
Previous releases - always broken:
- sched: disallow noqueue for qdisc classes
- eth: ice: fix potential memory leak in ice_gnss_tty_write()
- eth: ixgbe: fix pci device refcount leak
- eth: mlx5:
- fix command stats access after free
- fix macsec possible null dereference when updating MAC security entity (SecY)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=4ANJ
-----END PGP SIGNATURE-----
Merge tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc.
The rxrpc changes are noticeable large: to address a recent regression
has been necessary completing the threaded refactor.
Current release - regressions:
- rxrpc:
- only disconnect calls in the I/O thread
- move client call connection to the I/O thread
- fix incoming call setup race
- eth: mlx5:
- restore pkt rate policing support
- fix memory leak on updating vport counters
Previous releases - regressions:
- gro: take care of DODGY packets
- ipv6: deduct extension header length in rawv6_push_pending_frames
- tipc: fix unexpected link reset due to discovery messages
Previous releases - always broken:
- sched: disallow noqueue for qdisc classes
- eth: ice: fix potential memory leak in ice_gnss_tty_write()
- eth: ixgbe: fix pci device refcount leak
- eth: mlx5:
- fix command stats access after free
- fix macsec possible null dereference when updating MAC security
entity (SecY)"
* tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
r8152: add vendor/device ID pair for Microsoft Devkit
net: stmmac: add aux timestamps fifo clearance wait
bnxt: make sure we return pages to the pool
net: hns3: fix wrong use of rss size during VF rss config
ipv6: raw: Deduct extension header length in rawv6_push_pending_frames
net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit()
net: sched: disallow noqueue for qdisc classes
iavf/iavf_main: actually log ->src mask when talking about it
igc: Fix PPS delta between two synchronized end-points
ixgbe: fix pci device refcount leak
octeontx2-pf: Fix resource leakage in VF driver unbind
selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.
selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.
selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".
net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY)
net/mlx5e: Fix macsec ssci attribute handling in offload path
net/mlx5: E-switch, Coverity: overlapping copy
net/mlx5e: Don't support encap rules with gbp option
net/mlx5: Fix ptp max frequency adjustment range
net/mlx5e: Fix memory leak on updating vport counters
...
|
||
|
Linus Torvalds
|
cf4d5be89c |
- Fix objtool to be more permissive with hand-written assembly
that uses non-function symbols in executable sections. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmPAETkRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1jlhg//RtXGdWRPhbOxUBOxBxf0dlikeq9yy7Si JkdzAiv9r8YRWh0pLI4+YNLIKhlCxjN46ur2Pm9WlXa1VkA0mgA78DEnZvWCaQhJ SM334xB1NIb5PwdzIPP9qxPE/nZEUYHC9fGZsHhvy9XkqNDVW/3pqorjOQYHn+V6 LlQ2lLmU76jjandO3FbEt2AspWk1JAYbGomSgrVLnSw2GPreOre4EWYmMWuTyUUA ba0vcQT7Y8J5dqxuSiwbvxUQu1dY29FcR8kYEhreXGV+3y81Iw7gj06tevLgzusR UTXuONj/8/YXfBU/S5RDedzmRhLdUi5sN8/H4yY9V2jd8kHZXFIR9lmyoVBbJu5a jBicEIWlkzyXFxlbfis1y6JI4arLtgerMsWypn+s5gFikrIx0iEUvU9fkfmyuajf f9+k939Tf7pWo7BBZlU21ILDp+jDVhVhrRfBSQWQOBMymCAbQsI4tzL4NusS9EI+ NQXtNKWo4t4F/SO44MArHsvdsZ4aQe2kLlcwkkqd3oxmLXzJ1aNbmabO8WNRopjH twOVyHgh04HbbMkp/sHytiqRCWm6Qmiza47cJij/zCgn7yIow8RTV5pF6PqAaKfE boBeqhZEW/4RN6XHpwIlrTRctjUFJxpOAVSRhv8FbwlsoWQSqKuWB3O1wc5nRVBn 1IDeYCbHA/Y= =bMbY -----END PGP SIGNATURE----- Merge tag 'core-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Ingo Molnar: - Fix objtool to be more permissive with hand-written assembly that uses non-function symbols in executable sections. * tag 'core-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Tolerate STT_NOTYPE symbols at end of section |
||
|
Linus Torvalds
|
f129b61612 |
Fixes for nolibc for v6.2
This series addresses the following bugs: o The fd_set structure was incorrectly defined as arrays of u32 instead of long, which breaks BE64. Fix courtesy of Sven Schnelle. o S_ISxxx macros were incorrectly testing the bits after applying them instead of bitwise ANDing S_FMT with the value. Fix from Warner Losh. o The mips code was randomly broken due to an unprotected "noreorder" directive in the _start code that could prevent the assembler from filling delayed slots. This in turn resulted in random other instructions being placed into those slots. Fix courtesy of Willy Tarreau. o The current nolibc header layout refrains from including files that are not explicitly included by the code using nolibc. Unfortunately, this causes build failures when such files contain definitions that are used (for example) by libgcc. Example definitions include raise() and memset(), which are called by some architectures, but only at certain optimization levels. Fix courtesy of Willy Tarreau. o gcc 11.3 in ARM thumb2 mode at -O2 recognized a memset() construction inside the memset() definition. The compiler replaced this construction with a call to... memset(). Userland cannot be forced to build with -ffreestanding, so an empty asm() statement was introduced into the loop the loop in order to prevent the compiler from making this unproductive transformation. Fix courtesy of Willy Tarreau. o Most of the O_* macros were wrong on RISCV because their octal values were coded as hexadecimal. This resulted in the getdents64() selftest failing. Fix courtesy of Willy Tarreau. The series was tested on x86_64, i386, armv5, armv7, thumb1, thumb2, mips and riscv, all at -O0, -Os and -O3. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmO8ZPsTHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jDqUD/4zymVYzv0Pfbr3gHiZAgWCr+FwHz46 SGK4KVvSPn3L0MMT0JW+Ws6tB/WKwOFzK4dtvhU+z1ClLZEhLgQVVjo9lwLvUorj QvxubMnRLJCZjyvgCOJ2mbJCGLMSoOceSrNgl4xEeQ1gu6wrmjLu8erDJvBCyTMX 4Io7tv1ddO3xJuptrJzB1jZpFl/OvJkrSuB3fHAtCcc/YcXy59imp690lawyWfLL ryiwVgep0XRPLTiEm+Jd0iMsTFJaJEEvkt2aQ9yd6C92z27/+erJ7SsrWcXHZAjD Ck7h4EX2SpJliRFW4QeGdC5/16/7EIGs2WUTuGnwB4uIleD4vGwwvNJkclhKi2au vKfcy5/soFuaWfOOUthfHAA0OX4DXHGFWP9BhEljGTG0F9bbGqqXnsZm37qrq2cQ Ns2tQ2BXvm6qY1TGsv3usMch8xF3Gy521iO5qMQ1YYMeB8Jw6IZJnT6w0gHSqo8O mR8i2zgnsvc3a2KTs45djdN4cu7ARzwwGDXc+ZgEhOsVGp5k93MGoixdYjZkIzCp Zoy/p9sr66OTeUXfxVOJvJcnXzAlWTUgWu92+tlDDrhu2S+YWRGDqhjUfjnqM+dt q7EYj/tVmXsy5B/f/ndmjTUwCxQ7oDM3v72YqGbrUFdA7lHeNSkWY1kjM4PmRJsr aZBwnA0Utly0VQ== =bR/q -----END PGP SIGNATURE----- Merge tag 'urgent-nolibc.2023.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull nolibc fixes from Paul McKenney: - The fd_set structure was incorrectly defined as arrays of u32 instead of long, which breaks BE64. Fix courtesy of Sven Schnelle. - S_ISxxx macros were incorrectly testing the bits after applying them instead of bitwise ANDing S_FMT with the value. Fix from Warner Losh. - The mips code was randomly broken due to an unprotected "noreorder" directive in the _start code that could prevent the assembler from filling delayed slots. This in turn resulted in random other instructions being placed into those slots. Fix courtesy of Willy Tarreau. - The current nolibc header layout refrains from including files that are not explicitly included by the code using nolibc. Unfortunately, this causes build failures when such files contain definitions that are used (for example) by libgcc. Example definitions include raise() and memset(), which are called by some architectures, but only at certain optimization levels. Fix courtesy of Willy Tarreau. - gcc 11.3 in ARM thumb2 mode at -O2 recognized a memset() construction inside the memset() definition. The compiler replaced this construction with a call to... memset(). Userland cannot be forced to build with -ffreestanding, so an empty asm() statement was introduced into the loop the loop in order to prevent the compiler from making this unproductive transformation. Fix courtesy of Willy Tarreau. - Most of the O_* macros were wrong on RISCV because their octal values were coded as hexadecimal. This resulted in the getdents64() selftest failing. Fix courtesy of Willy Tarreau. This was tested on x86_64, i386, armv5, armv7, thumb1, thumb2, mips and riscv, all at -O0, -Os and -O3. * tag 'urgent-nolibc.2023.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: tools/nolibc: fix the O_* fcntl/open macro definitions for riscv tools/nolibc: prevent gcc from making memset() loop over itself tools/nolibc: fix missing includes causing build issues at -O0 tools/nolibc: restore mips branch ordering in the _start block tools/nolibc: Fix S_ISxxx macros nolibc: fix fd_set type |
||
Florian Westphal
|
c273289fac |
selftests: netfilter: fix transaction test script timeout handling
The kselftest framework uses a default timeout of 45 seconds for
all test scripts.
Increase the timeout to two minutes for the netfilter tests, this
should hopefully be enough,
Make sure that, should the script be canceled, the net namespace and
the spawned ping instances are removed.
Fixes:
|
||
Adrian Hunter
|
cf129830ee |
perf auxtrace: Fix address filter duplicate symbol selection
When a match has been made to the nth duplicate symbol, return
success not error.
Example:
Before:
$ cat file.c
cat: file.c: No such file or directory
$ cat file1.c
#include <stdio.h>
static void func(void)
{
printf("First func\n");
}
void other(void);
int main()
{
func();
other();
return 0;
}
$ cat file2.c
#include <stdio.h>
static void func(void)
{
printf("Second func\n");
}
void other(void)
{
func();
}
$ gcc -Wall -Wextra -o test file1.c file2.c
$ perf record -e intel_pt//u --filter 'filter func @ ./test' -- ./test
Multiple symbols with name 'func'
#1 0x1149 l func
which is near main
#2 0x1179 l func
which is near other
Disambiguate symbol name by inserting #n after the name e.g. func #2
Or select a global symbol by inserting #0 or #g or #G
Failed to parse address filter: 'filter func @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
Failed to parse address filter: 'filter func #2 @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
After:
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
First func
Second func
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
$ perf script --itrace=b -Ftime,flags,ip,sym,addr --ns
1231062.526977619: tr strt 0 [unknown] => 558495708179 func
1231062.526977619: tr end call 558495708188 func => 558495708050 _init
1231062.526979286: tr strt 0 [unknown] => 55849570818d func
1231062.526979286: tr end return 55849570818f func => 55849570819d other
Fixes:
|
||
Arnaldo Carvalho de Melo
|
14292a4ae1 |
perf bpf: Avoid build breakage with libbpf < 0.8.0 + LIBBPF_DYNAMIC=1
In |
||
Ian Rogers
|
f00eccb447 |
perf build: Fix build error when NO_LIBBPF=1
The $(LIBBPF) target should only be a dependency of prepare if the
static version of libbpf is needed. Add a new LIBBPF_STATIC variable
that is set by Makefile.config. Use LIBBPF_STATIC to determine whether
the CFLAGS, etc. need updating and for adding $(LIBBPF) as a prepare
dependency.
As Makefile.config isn't loaded for "clean" as a target, always set
LIBBPF_OUTPUT regardless of whether it is needed for $(LIBBPF). This
is done to minimize conditional logic for $(LIBBPF)-clean.
This issue and an original fix was reported by Mike Leach in:
https://lore.kernel.org/lkml/20230105172243.7238-1-mike.leach@linaro.org/
Fixes:
|
||
|
Arnaldo Carvalho de Melo
|
213b760fbc |
perf tools: Don't install libtraceevent plugins as its not anymore in the kernel sources
While doing 'make -C tools/perf build-test' one can notice error
messages while trying to install libtraceevent plugins, stop doing that
as libtraceevent isn't anymore a homie.
These are the warnings dealt with:
make_install_prefix_slash_O: make install prefix=/tmp/krava/
failed to find: /tmp/krava/etc/bash_completion.d/perf
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_cfg80211.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_scsi.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_xen.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_function.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_sched_switch.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_mac80211.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_kvm.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_kmem.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_hrtimer.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_jbd2.so
Fixes:
|
||
Leo Yan
|
dce088ab0d |
perf kmem: Support field "node" in evsel__process_alloc_event() coping with recent tracepoint restructuring
Commit |
||
|
Leo Yan
|
b3719108ae |
perf kmem: Support legacy tracepoints
Commit |
||
|
Ian Rogers
|
d891f2b724 |
perf build: Properly guard libbpf includes
Including libbpf header files should be guarded by HAVE_LIBBPF_SUPPORT.
In bpf_counter.h, move the skeleton utilities under HAVE_BPF_SKEL.
Fixes:
|
||
Guillaume Nault
|
d68ff8ad33 |
selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.
Use 'set -e' and an exit handler to stop the script if a command fails
and ensure the test environment is cleaned up in any case. Also, handle
the case where the script is interrupted by SIGINT.
The only command that's expected to fail is 'wait $ping_pid', since
it's killed by the script. Handle this case with '|| true' to make it
play well with 'set -e'.
Finally, return the Kselftest SKIP code (4) when the script breaks
because of an environment problem or a command line failure. The 0 and
1 return codes should now reliably indicate that all tests have been
run (0: all tests run and passed, 1: all tests run but at least one
failed, 4: test script didn't run completely).
Fixes:
|
||
|
Guillaume Nault
|
c53cb00f79 |
selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.
This selftest currently runs half in the current namespace and half in
a netns of its own. Therefore, the test can fail if the current
namespace is already configured with incompatible parameters (for
example if it already has a veth0 interface).
Adapt the script to put both ends of the veth pair in their own netns.
Now veth0 is created in NS0 instead of the current namespace, while
veth1 is set up in NS1 (instead of the 'testing' netns).
The user visible netns names are randomised to minimise the risk of
conflicts with already existing namespaces. The cleanup() function
doesn't need to remove the virtual interface anymore: deleting NS0 and
NS1 automatically removes the virtual interfaces they contained.
We can remove $ns, which was only used to run ip commands in the
'testing' netns (let's use the builtin "-netns" option instead).
However, we still need a similar functionality as ping and tcpdump
now need to run in NS0. So we now have $RUN_NS0 for that.
Fixes:
|
||
|
Guillaume Nault
|
e59370b2e9 |
selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".
The ping command can run before DAD completes. In that case, ping may
fail and break the selftest.
We don't need DAD here since we're working on isolated device pairs.
Fixes:
|
||
Willy Tarreau
|
00b18da408 |
tools/nolibc: fix the O_* fcntl/open macro definitions for riscv
When RISCV port was imported in 5.2, the O_* macros were taken with
their octal value and written as-is in hex, resulting in the getdents64()
to fail in nolibc-test.
Fixes:
|
||
|
Willy Tarreau
|
1bfbe1f3e9 |
tools/nolibc: prevent gcc from making memset() loop over itself
When building on ARM in thumb mode with gcc-11.3 at -O2 or -O3,
nolibc-test segfaults during the select() tests. It turns out that at
this level, gcc recognizes an opportunity for using memset() to zero
the fd_set, but it miscompiles it because it also recognizes a memset
pattern as well, and decides to call memset() from the memset() code:
000122bc <memset>:
122bc: b510 push {r4, lr}
122be: 0004 movs r4, r0
122c0: 2a00 cmp r2, #0
122c2: d003 beq.n 122cc <memset+0x10>
122c4: 23ff movs r3, #255 ; 0xff
122c6: 4019 ands r1, r3
122c8: f7ff fff8 bl 122bc <memset>
122cc: 0020 movs r0, r4
122ce: bd10 pop {r4, pc}
Simply placing an empty asm() statement inside the loop suffices to
avoid this.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
||
|
Willy Tarreau
|
55abdd1f5e |
tools/nolibc: fix missing includes causing build issues at -O0
After the nolibc includes were split to facilitate portability from standard libcs, programs that include only what they need may miss some symbols which are needed by libgcc. This is the case for raise() which is needed by the divide by zero code in some architectures for example. Regardless, being able to include only the apparently needed files is convenient. Instead of trying to move all exported definitions to a single file, since this can change over time, this patch takes another approach consisting in including the nolibc header at the end of all standard include files. This way their types and functions are already known at the moment of inclusion, and including any single one of them is sufficient to bring all the required ones. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> |
||
|
Willy Tarreau
|
184177c3d6 |
tools/nolibc: restore mips branch ordering in the _start block
Depending on the compiler used and the optimization options, the sbrk()
test was crashing, both on real hardware (mips-24kc) and in qemu. One
such example is kernel.org toolchain in version 11.3 optimizing at -Os.
Inspecting the sys_brk() call shows the following code:
0040047c <sys_brk>:
40047c: 24020fcd li v0,4045
400480: 27bdffe0 addiu sp,sp,-32
400484: 0000000c syscall
400488: 27bd0020 addiu sp,sp,32
40048c: 10e00001 beqz a3,400494 <sys_brk+0x18>
400490: 00021023 negu v0,v0
400494: 03e00008 jr ra
It is obviously wrong, the "negu" instruction is placed in beqz's
delayed slot, and worse, there's no nop nor instruction after the
return, so the next function's first instruction (addiu sip,sip,-32)
will also be executed as part of the delayed slot that follows the
return.
This is caused by the ".set noreorder" directive in the _start block,
that applies to the whole program. The compiler emits code without the
delayed slots and relies on the compiler to swap instructions when this
option is not set. Removing the option would require to change the
startup code in a way that wouldn't make it look like the resulting
code, which would not be easy to debug. Instead let's just save the
default ordering before changing it, and restore it at the end of the
_start block. Now the code is correct:
0040047c <sys_brk>:
40047c: 24020fcd li v0,4045
400480: 27bdffe0 addiu sp,sp,-32
400484: 0000000c syscall
400488: 10e00002 beqz a3,400494 <sys_brk+0x18>
40048c: 27bd0020 addiu sp,sp,32
400490: 00021023 negu v0,v0
400494: 03e00008 jr ra
400498: 00000000 nop
Fixes:
|
||
Warner Losh
|
16f5cea741 |
tools/nolibc: Fix S_ISxxx macros
The mode field has the type encoded as an value in a field, not as a bit mask. Mask the mode with S_IFMT instead of each type to test. Otherwise, false positives are possible: eg S_ISDIR will return true for block devices because S_IFDIR = 0040000 and S_IFBLK = 0060000 since mode is masked with S_IFDIR instead of S_IFMT. These macros now match the similar definitions in tools/include/uapi/linux/stat.h. Signed-off-by: Warner Losh <imp@bsdimp.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> |
||
Sven Schnelle
|
feaf756587 |
nolibc: fix fd_set type
The kernel uses unsigned long for the fd_set bitmap, but nolibc use u32. This works fine on little endian machines, but fails on big endian. Convert to unsigned long to fix this. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> |
||
Nicholas Piggin
|
cad90e5381 |
objtool: Tolerate STT_NOTYPE symbols at end of section
Hand-written asm often contains non-function symbols in executable sections. _end symbols for finding the size of instruction blocks for runtime processing is one such usage. optprobe_template_end is one example that causes the warning: objtool: optprobe_template_end(): can't find starting instruction This is because the symbol happens to be at the end of the file (and therefore end of a section in the object file). So ignore end-of-section STT_NOTYPE symbols instead of bailing out because an instruction can't be found. While we're here, add a more descriptive warning for STT_FUNC symbols found at the end of a section. [ This also solves a PowerPC regression reported by Sathvika Vasireddy. ] Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reported-by: Sathvika Vasireddy <sv@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Sathvika Vasireddy <sv@linux.ibm.com> Link: https://lore.kernel.org/r/20221220101323.3119939-1-npiggin@gmail.com |
||
Athira Rajeev
|
6f9aba7f0d |
perf tests bpf prologue: Fix bpf-script-test-prologue test compile issue with clang
While running 'perf test' for bpf, observed that "BPF prologue
generation" test case fails to compile with clang. Logs below from
powerpc:
<stdin>:33:2: error: use of undeclared identifier 'fmode_t'
fmode_t f_mode = (fmode_t)_f_mode;
^
<stdin>:37:6: error: use of undeclared identifier 'f_mode'; did you mean '_f_mode'?
if (f_mode & FMODE_WRITE)
^~~~~~
_f_mode
<stdin>:30:60: note: '_f_mode' declared here
int bpf_func__null_lseek(void *ctx, int err, unsigned long _f_mode,
^
2 errors generated.
The test code tests/bpf-script-test-prologue.c uses fmode_t. And the
error above is for "fmode_t" which is defined in include/linux/types.h
as part of kernel build directory: "/lib/modules/<kernel_version>/build"
that comes from kernel devel [ soft link to /usr/src/<kernel_version> ].
Clang picks this header file from "-working-directory" build option that
specifies this build folder.
But the commit
|
||
Mirsad Goran Todorovac
|
7d6ceeb187 |
af_unix: selftest: Fix the size of the parameter to connect()
Adjust size parameter in connect() to match the type of the parameter, to
fix "No such file or directory" error in selftests/net/af_unix/
test_oob_unix.c:127.
The existing code happens to work provided that the autogenerated pathname
is shorter than sizeof (struct sockaddr), which is why it hasn't been
noticed earlier.
Visible from the trace excerpt:
bind(3, {sa_family=AF_UNIX, sun_path="unix_oob_453059"}, 110) = 0
clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7fa6a6577a10) = 453060
[pid <child>] connect(6, {sa_family=AF_UNIX, sun_path="unix_oob_45305"}, 16) = -1 ENOENT (No such file or directory)
BUG: The filename is trimmed to sizeof (struct sockaddr).
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Cc: Florian Westphal <fw@strlen.de>
Reviewed-by: Florian Westphal <fw@strlen.de>
Fixes:
|
||
|
Linus Torvalds
|
e9ffbf16ca |
memblock: small fixes in kernel-doc and tests
* Fix kernel-doc for memblock_phys_free() to use correct names for the
counterpart allocation methods
* Fix compilation error in memblock tests
-----BEGIN PGP SIGNATURE-----
iQFMBAABCAA2FiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmO6bMYYHG1pa2UucmFw
b3BvcnRAZ21haWwuY29tAAoJEDkDhibLDv2RUt8H/Ayh8cO8kpKbJ2jH9eFwba6T
JPOv5P3hjKHbY+NMGG9MfAUTMw6Lxa59EiC+xGyPFWrtt/ZpKgaaBznxSC7dkVYy
XarzK3zulZmL4BdjBQearXXj5gSkZnuEHb9Pjs19GLDnGoRJczoHYG6rXlAWh1sg
w4H4g4QyHKYqqUlnbDi0GTIaaKY76Uprw6x6w8xwtmdUw9+1edqnoN9fRJxY9AwM
7ez7FR6rJ5g7AgcLfa/dTaCZgloLPKVdMI+q29lBXM5xDrUpxeEfXg5iU7Hax+rT
4o43HXGVGyiuWYlgdWd9B18M4Xma55K1Q+cQ3cELsAvq7XACvQcA6xi0QnFfgpU=
=DNKq
-----END PGP SIGNATURE-----
Merge tag 'fixes-2023-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
"Small fixes in kernel-doc and tests:
- Fix kernel-doc for memblock_phys_free() to use correct names for
the counterpart allocation methods
- Fix compilation error in memblock tests"
* tag 'fixes-2023-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Fix doc for memblock_phys_free
memblock tests: Fix compilation error.
|
||
|
Linus Torvalds
|
56f8145839 |
perf tools fixes for v6.2: 1st batch
- Fix segfault when trying to process tracepoints present in a perf.data file and not linked with libtraceevent. - Fix build on uClibc systems by adding missing sys/types.h include, that was being obtained indirectly which stopped being the case when tools/lib/traceevent was removed. - Don't show commands in 'perf help' that depend on linking with libtraceevent when not building with that library, which is now a possibility since we no longer ship a copy in tools/lib/traceevent. - Fix failure in 'perf test' entry testing the combination of 'perf probe' user space function + 'perf record' + 'perf script' where it expects a backtrace leading to glibc's inet_pton() from 'ping' that now happens more than once with glibc 2.35 for IPv6 addreses. - Fix for the inet_pton perf test on s/390 where 'text_to_binary_address' now appears on the backtrace. - Fix build error on riscv due to missing header for 'struct perf_sample'. - Fix 'make -C tools perf_install' install variant by not propagating the 'subdir' to submakes for the 'install_headers' targets. - Fix handling of unsupported cgroup events when using BPF counters in 'perf stat'. - Count all cgroups, not just the last one when using 'perf stat --for-each-cgroup' with --bpf-counters. This makes the output using BPF counters match the output without using it, which was the intention all along, the output should be the same using --bpf-counters or not. - Fix 'perf lock contention' core dump related to not finding the "__sched_text_end" symbol on s/390. - Fix build failure when HEAD is signed: exclude the signature from the version string. - Add missing closedir() calls to in perf_data__open_dir(), plugging a fd leak. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCY7hWpQAKCRCyPKLppCJ+ J4UvAQDru5hkxelbwP0keDjfIn68Iz5HUOe7BTNNzexLUsEfDQD/YA31CuZzTxh3 3qt8nyfFr1vwzgKAUFx2873jgi5+IQE= =n5PI -----END PGP SIGNATURE----- Merge tag 'perf-tools-fixes-for-v6.2-1-2023-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix segfault when trying to process tracepoints present in a perf.data file and not linked with libtraceevent. - Fix build on uClibc systems by adding missing sys/types.h include, that was being obtained indirectly which stopped being the case when tools/lib/traceevent was removed. - Don't show commands in 'perf help' that depend on linking with libtraceevent when not building with that library, which is now a possibility since we no longer ship a copy in tools/lib/traceevent. - Fix failure in 'perf test' entry testing the combination of 'perf probe' user space function + 'perf record' + 'perf script' where it expects a backtrace leading to glibc's inet_pton() from 'ping' that now happens more than once with glibc 2.35 for IPv6 addreses. - Fix for the inet_pton perf test on s/390 where 'text_to_binary_address' now appears on the backtrace. - Fix build error on riscv due to missing header for 'struct perf_sample'. - Fix 'make -C tools perf_install' install variant by not propagating the 'subdir' to submakes for the 'install_headers' targets. - Fix handling of unsupported cgroup events when using BPF counters in 'perf stat'. - Count all cgroups, not just the last one when using 'perf stat' and combining --for-each-cgroup with --bpf-counters. This makes the output using BPF counters match the output without using it, which was the intention all along, the output should be the same using --bpf-counters or not. - Fix 'perf lock contention' core dump related to not finding the "__sched_text_end" symbol on s/390. - Fix build failure when HEAD is signed: exclude the signature from the version string. - Add missing closedir() calls to in perf_data__open_dir(), plugging a fd leak. * tag 'perf-tools-fixes-for-v6.2-1-2023-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Fix build on uClibc systems by adding missing sys/types.h include perf stat: Fix handling of --for-each-cgroup with --bpf-counters to match non BPF mode perf stat: Fix handling of unsupported cgroup events when using BPF counters perf test record_probe_libc_inet_pton: Fix test on s/390 where 'text_to_binary_address' now appears on the backtrace perf lock contention: Fix core dump related to not finding the "__sched_text_end" symbol on s/390 perf build: Don't propagate subdir to submakes for install_headers perf test record_probe_libc_inet_pton: Fix failure due to extra inet_pton() backtrace in glibc >= 2.35 perf tools: Fix segfault when trying to process tracepoints in perf.data and not linked with libtraceevent perf tools: Don't include signature in version strings perf help: Use HAVE_LIBTRACEEVENT to filter out unsupported commands perf tools riscv: Fix build error on riscv due to missing header for 'struct perf_sample' perf tools: Fix resources leak in perf_data__open_dir() |
||
|
Linus Torvalds
|
50011c32f4 |
Including fixes from bpf, wifi, and netfilter.
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons,
avoid null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught
by Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch
and kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal document
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TlcN
-----END PGP SIGNATURE-----
Merge tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi, and netfilter.
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons, avoid
null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught by
Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized
descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch and
kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with
WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal
document"
* tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
caif: fix memory leak in cfctrl_linkup_request()
inet: control sockets should not use current thread task_frag
net/ulp: prevent ULP without clone op from entering the LISTEN status
qed: allow sleep in qed_mcp_trace_dump()
MAINTAINERS: Update maintainers for ptp_vmw driver
usb: rndis_host: Secure rndis_query check against int overflow
net: dpaa: Fix dtsec check for PCS availability
octeontx2-pf: Fix lmtst ID used in aura free
drivers/net/bonding/bond_3ad: return when there's no aggregator
netfilter: ipset: Rework long task execution when adding/deleting entries
netfilter: ipset: fix hash:net,port,net hang with /0 subnet
net: sparx5: Fix reading of the MAC address
vxlan: Fix memory leaks in error path
net: sched: htb: fix htb_classify() kernel-doc
net: sched: cbq: dont intepret cls results when asked to drop
net: sched: atm: dont intepret cls results when asked to drop
dt-bindings: net: marvell,orion-mdio: Fix examples
dt-bindings: net: sun8i-emac: Add phy-supply property
net: ipa: use proper endpoint mask for suspend
selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier
...
|
||
Jakub Kicinski
|
49d9601b81 |
bpf-for-netdev
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmO17/QACgkQ6rmadz2v bTpFWBAAk85+qkRYyagEoAywkxPvRye6oYu321v69YjS7PdxqQ+sKSMyLR5brEaW QiQSQP/elwcBRyQAf4L/Fe++TZndpvuZ6CB+KUidOowtarxXPllc/TgWeNgF7A5l TuX3eQSLNdF5itdzoJzmiEQuBCHHXPce2L6UfNlP897yaWgxhawlkVEW+w8iB/UQ ZQCNGoDpga917DheLLx2kId046v70CUgwm8CU1rcAeA7Zi7B518OCzLm9z37l2em UWxPLOuQVA5u4O635dTRVUyluRPOvF1pjDei2gCmvC2JJS0X5eZbEEXCsZ04UbLd pd3y0+2WVOjiJ6kaSg6/U47G0gAjHfUHTLAoPzDw4LvlaXzyWZxK8Kxr1wHZRiYX q/iW1rUaWhsUI8XqROUnL3TA9UbFoKvSQIIQ8JEQN9jcd6enfMuBkwEDmZZIL9rR rZp3qZj+sxqGcKRpxorW5buM4vslYuoUD8/+9Lc+hkQ7QMCeDqdNzKEWtSCo3qjT ktbmZpNjCNnDhjyFZGuPsPxxK8I4QnuxGGeJvZeLZFlQq0Ft82APqFKzctdNAwFI NER4ihF0ohXdACrdL4PwaNXY10MCboHrQwpUy7vd2PUOAH+VI8nudSuweVXmeYPf ldH3w2N0G/wEy0QOvEo7SUEx3DiGTUNzHvu/ts4fDwUBqrBrzEM= =vD3D -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Alexei Starovoitov says: ==================== bpf 2023-01-04 We've added 5 non-merge commits during the last 8 day(s) which contain a total of 5 files changed, 112 insertions(+), 18 deletions(-). The main changes are: 1) Always use maximal size for copy_array in the verifier to fix KASAN tracking, from Kees. 2) Fix bpf task iterator walking through dead tasks, from Kui-Feng. 3) Make sure livepatch and bpf fexit can coexist, from Chuang. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Always use maximal size for copy_array() selftests/bpf: add a test for iter/task_vma for short-lived processes bpf: keep a reference to the mm, in case the task is dead. selftests/bpf: Temporarily disable part of btf_dump:var_data test. bpf: Fix panic due to wrong pageattr of im->image ==================== Link: https://lore.kernel.org/r/20230104215500.79435-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
41c03ba9be |
virtio,vhost,vdpa: fixes, cleanups
mostly fixes all over the place, a couple of cleanups. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmOsSY4PHG1zdEByZWRo YXQuY29tAAoJECgfDbjSjVRpnEoH/i7iGllhlBKKula2o97CixSWqMYY7ncryfTN c3F3Wjk4imlhR8Je7n+xmDPLoE9vFkKdZL6o7kIESCJfNjCQ6r6Rnl8LoHkOZhvj oLJ8zUfbOa5+B5kzOdnh2WV+3uNkssjayTrozvkDQ4r9MeSVRaC/xZ+lz85PQ+c7 FaNNyT2G+fZ6HoQg5U+Q+bj2lqxP9FYKMqURWGxUqa/gIMmky6VJeUQvmVdQuzCq cHR48USpn8WE7j8uTf6yCQQuCElOQo1j7Op3FPyaNR3bPWbgzjvOnPci+giQ6hJ5 OAKxJ6HX0ApqcpPoPaA+Qg43EAha+Cu7kw4I58J0U09nQIf/N9w= =4CJb -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: "Mostly fixes all over the place, a couple of cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (32 commits) virtio_blk: Fix signedness bug in virtblk_prep_rq() vdpa_sim_net: should not drop the multicast/broadcast packet vdpasim: fix memory leak when freeing IOTLBs vdpa: conditionally fill max max queue pair for stats vdpa/vp_vdpa: fix kfree a wrong pointer in vp_vdpa_remove vduse: Validate vq_num in vduse_validate_config() tools/virtio: remove smp_read_barrier_depends() tools/virtio: remove stray characters vhost_vdpa: fix the crash in unmap a large memory virtio: Implementing attribute show with sysfs_emit virtio-crypto: fix memory leak in virtio_crypto_alg_skcipher_close_session() tools/virtio: Variable type completion vdpa_sim: fix vringh initialization in vdpasim_queue_ready() virtio_blk: use UINT_MAX instead of -1U vhost-vdpa: fix an iotlb memory leak vhost: fix range used in translate_desc() vringh: fix range used in iotlb_translate() vhost/vsock: Fix error handling in vhost_vsock_init() vdpa_sim: fix possible memory leak in vdpasim_net_init() and vdpasim_blk_init() tools: Delete the unneeded semicolon after curly braces ... |
||
Jesus Sanchez-Palencia
|
481028dbf1 |
perf tools: Fix build on uClibc systems by adding missing sys/types.h include
Not all libc implementations define ssize_t as part of stdio.h like
glibc does since the standard only requires this type to be defined by
unistd.h and sys/types.h. For this reason the perf build is currently
broken for toolchains based on uClibc, for instance.
Include sys/types.h explicitly to fix that.
Committer notes:
In addition, in the past this worked in uClibc test systems as there was
another way to get to sys/types.h that got removed in that cset:
tools/perf/util/trace-event.h
/usr/include/traceevent/event_parse.h # This got removed from util/trace-event.h in
|
||
Namhyung Kim
|
54b353a20c |
perf stat: Fix handling of --for-each-cgroup with --bpf-counters to match non BPF mode
The --for-each-cgroup can have the same cgroup multiple times, but this
confuses BPF counters (since they have the same cgroup id), making only
the last cgroup events to be counted.
Let's check the cgroup name before adding a new entry to the cgroups
list.
Before:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Performance counter stats for 'system wide':
<not counted> msec cpu-clock /
<not counted> context-switches /
<not counted> cpu-migrations /
<not counted> page-faults /
<not counted> cycles /
<not counted> instructions /
<not counted> branches /
<not counted> branch-misses /
8,016.04 msec cpu-clock / # 7.998 CPUs utilized
6,152 context-switches / # 767.461 /sec
250 cpu-migrations / # 31.187 /sec
442 page-faults / # 55.139 /sec
613,111,487 cycles / # 0.076 GHz
280,599,604 instructions / # 0.46 insn per cycle
57,692,724 branches / # 7.197 M/sec
3,385,168 branch-misses / # 5.87% of all branches
1.002220125 seconds time elapsed
After it becomes similar to the non-BPF mode:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Performance counter stats for 'system wide':
8,013.38 msec cpu-clock / # 7.998 CPUs utilized
6,859 context-switches / # 855.944 /sec
334 cpu-migrations / # 41.680 /sec
345 page-faults / # 43.053 /sec
782,326,119 cycles / # 0.098 GHz
471,645,724 instructions / # 0.60 insn per cycle
94,963,430 branches / # 11.851 M/sec
3,685,511 branch-misses / # 3.88% of all branches
1.001864539 seconds time elapsed
Committer notes:
As a reminder, to test with BPF counters one has to use BUILD_BPF_SKEL=1
in the make command line and have clang/llvm installed when building
perf, otherwise the --bpf-counters option will not be available:
# perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Error: unknown option `bpf-counters'
Usage: perf stat [<options>] [<command>]
-a, --all-cpus system-wide collection from all CPUs
<SNIP>
#
Fixes:
|
||
|
Namhyung Kim
|
2d656b0f81 |
perf stat: Fix handling of unsupported cgroup events when using BPF counters
When --for-each-cgroup option is used, it fails when any of events is
not supported and exits immediately. This is not how 'perf stat'
handles unsupported events.
Let's ignore the failure and proceed with others so that the output is
similar to when BPF counters are not used:
Before:
$ sudo ./perf stat -a --bpf-counters -e L1-icache-loads,L1-dcache-loads --for-each-cgroup system.slice,user.slice sleep 1
Failed to open first cgroup events
$
After it shows output similat to when --bpf-counters isn't specified:
$ sudo ./perf stat -a --bpf-counters -e L1-icache-loads,L1-dcache-loads --for-each-cgroup system.slice,user.slice sleep 1
Performance counter stats for 'system wide':
<not supported> L1-icache-loads system.slice
29,892,418 L1-dcache-loads system.slice
<not supported> L1-icache-loads user.slice
52,497,220 L1-dcache-loads user.slice
$
Fixes:
|
||
Thomas Richter
|
fb710ddee7 |
perf test record_probe_libc_inet_pton: Fix test on s/390 where 'text_to_binary_address' now appears on the backtrace
perf test '84: probe libc's inet_pton & backtrace it with ping' fails on
s390. Debugging revealed a changed stack trace for the ping command
using probes:
ping 35729 [002] 8006.365063: probe_libc:inet_pton: (3ff9603e7c0)
13e7c0 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
---> 104371 text_to_binary_address+0xef1 (inlined)
104371 gaih_inet+0xef1 (inlined)
104371 __GI_getaddrinfo+0xef1 (inlined)
5d4b main+0x139b (/usr/bin/ping)
The line "---> text_to_binary_address ..." is new. It was introduced
with glibc version 2.36.7.2 released with Fedora 37 for s390.
Output before
# perf test inet_pton
84: probe libc's inet_pton & backtrace it with ping : FAILED!
#
Output after:
# perf test inet_pton
84: probe libc's inet_pton & backtrace it with ping : Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20221228145704.2702487-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Aaron Thompson
|
3407267473 |
memblock tests: Fix compilation error.
Commit
|
||
|
Thomas Richter
|
d8d85ce86d |
perf lock contention: Fix core dump related to not finding the "__sched_text_end" symbol on s/390
The test case perf lock contention dumps core on s390. Run the following
commands:
# ./perf lock record -- ./perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 2.799 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.073 MB perf.data (100 samples) ]
#
# ./perf lock contention
Segmentation fault (core dumped)
#
The function call stack is lengthy, here are the top 5 functions:
# gdb ./perf core.24048
GNU gdb (GDB) Fedora Linux 12.1-6.fc37
Core was generated by `./perf lock contention'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356
3356 machine->sched.text_end = kmap->unmap_ip(kmap, sym->start);
(gdb) where
#0 0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356
#1 0x000000000109f244 in callchain_id (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:957
#2 0x000000000109e094 in get_key_by_aggr_mode (key=0x3ffea4f7290, addr=27758136, evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:586
#3 0x000000000109f4d0 in report_lock_contention_begin_event (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1004
#4 0x00000000010a00ae in evsel__process_contention_begin (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1254
#5 0x00000000010a0e14 in process_sample_event (tool=0x3ffea4f8480, event=0x3ff85601ef8, sample=0x3ffea4f77d0, evsel=0x30313e0, machine=0x3029e28) at builtin-lock.c:1464
.....
The issue is in function machine__is_lock_function() in file
./util/machine.c lines 3355:
/* should not fail from here */
sym = machine__find_kernel_symbol_by_name(machine, "__sched_text_end", &kmap);
machine->sched.text_end = kmap->unmap_ip(kmap, sym->start)
On s390 the symbol __sched_text_end is *NOT* in the symbol list and the
resulting pointer sym is set to NULL. The sym->start is then a NULL pointer
access and generates the core dump.
The reason why __sched_text_end is not in the symbol list on s390 is
simple:
When the symbol list is created at perf start up with function calls
dso__load
+--> dso__load_vmlinux_path
+--> dso__load_vmlinux
+--> dso__load_sym
+--> dso__load_sym_internal (reads kernel symbols)
+--> symbols__fixup_end
+--> symbols__fixup_duplicate
The issue is in function symbols__fixup_duplicate(). It deletes all
symbols with have the same address. On s390:
# nm -g ~/linux/vmlinux| fgrep c68390
0000000000c68390 T __cpuidle_text_start
0000000000c68390 T __sched_text_end
#
two symbols have identical addresses and __sched_text_end is considered
duplicate (in ascending sort order) and removed from the symbol list.
Therefore it is missing and an invalid pointer reference occurs. The
code checks for symbol __sched_text_start and when it exists assumes
symbol __sched_text_end is also in the symbol table. However this is not
the case on s390.
Same situation exists for symbol __lock_text_start:
0000000000c68770 T __cpuidle_text_end
0000000000c68770 T __lock_text_start
This symbol is also removed from the symbol table but used in function
machine__is_lock_function().
To fix this and keep duplicate symbols in the symbol table, set
symbol_conf.allow_aliases to true. This prevents the removal of
duplicate symbols in function symbols__fixup_duplicate().
Output After:
# ./perf lock contention
contended total wait max wait avg wait type caller
48 124.39 ms 123.99 ms 2.59 ms rwsem:W unlink_anon_vmas+0x24a
47 83.68 ms 83.26 ms 1.78 ms rwsem:W free_pgtables+0x132
5 41.22 us 10.55 us 8.24 us rwsem:W free_pgtables+0x140
4 40.12 us 20.55 us 10.03 us rwsem:W copy_process+0x1ac8
#
Fixes:
|
||
|
Ian Rogers
|
f89fb55714 |
perf build: Don't propagate subdir to submakes for install_headers
subdir is added to the OUTPUT which fails as part of building
install_headers when passed from "make -C tools perf_install".
Committer testing:
The original reporter (see the Link: below) had trouble with this:
$ make -C tools perf_install
That ended up with errors like this:
/var/home/acme/git/perf-urgent/tools/scripts/Makefile.include:17: *** output directory "/var/home/acme/git/perf-urgent/tools/perf/libperf/perf/" does not exist. Stop.
With this patch applied we now get it installed at:
INSTALL /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
As expected:
$ ls -la /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
-rw-r--r--. 1 acme acme 1146 Jan 3 15:42 /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
And if we clean tools with:
$ make -C tools clean
it gets cleaned up:
$ ls -la /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
ls: cannot access '/var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h': No such file or directory
$
Fixes:
|
||
|
Arnaldo Carvalho de Melo
|
b963c1d626 |
perf test record_probe_libc_inet_pton: Fix failure due to extra inet_pton() backtrace in glibc >= 2.35
Starting with glibc 2.35 there are extra inet_pton() calls when doing a
IPv6 ping as in one of the 'perf test' entry, which makes it fail:
# perf test inet_pton
89: probe libc's inet_pton & backtrace it with ping : FAILED!
#
If we look at what this script is expecting (commenting out the removal
of the temporary files in it):
# cat /tmp/expected.aT6
ping[][0-9 \.:]+probe_libc:inet_pton: \([[:xdigit:]]+\)
.*inet_pton\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/libc.so.6|inlined\)$
getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/libc.so.6\)$
.*(\+0x[[:xdigit:]]+|\[unknown\])[[:space:]]\(.*/bin/ping.*\)$
#
And looking at what we are getting out of 'perf script', to match with
the above:
# cat /tmp/perf.script.IUC
ping 623883 [006] 265438.471610: probe_libc:inet_pton: (7f32bcf314c0)
1314c0 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
29510 __libc_start_call_main+0x80 (/usr/lib64/libc.so.6)
ping 623883 [006] 265438.471664: probe_libc:inet_pton: (7f32bcf314c0)
1314c0 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
fa6c6 getaddrinfo+0x126 (/usr/lib64/libc.so.6)
491e [unknown] (/usr/bin/ping)
#
We see that its just the first call to inet_pton() that didn't came thru
getaddrinfo(), so if we ignore the first the script matches what it
expects, testing that using 'perf probe' + 'perf record' + 'perf script'
with callchains on userspace targets is producing the expected results.
Since we don't have a 'perf script --skip' to help us here, use tac +
grep to do that, resulting in a one liner that makes this script work on
both older glibc versions as well as with 2.35.
With it, on fedora 36, x86, glibc 2.35:
# perf test inet_pton
90: probe libc's inet_pton & backtrace it with ping : Ok
# perf test -v inet_pton
90: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 627197
ping 627220 1 267956.962402: probe_libc:inet_pton_1: (7f488bf314c0)
1314c0 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
fa6c6 getaddrinfo+0x126 (/usr/lib64/libc.so.6)
491e n (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
#
And on Ubuntu 22.04.1 LTS on a Libre Computer ROC-RK3399-PC arm64 system:
Before this patch it works (see that the script used has no 'tac' to
remove the first event):
root@roc-rk3399-pc:~# dpkg -l | grep libc-bin
ii libc-bin 2.35-0ubuntu3.1 arm64 GNU C Library: Binaries
root@roc-rk3399-pc:~# grep -w tac ~acme/libexec/perf-core/tests/shell/record+probe_libc_inet_pton.sh
root@roc-rk3399-pc:~# perf test inet_pton
86: probe libc's inet_pton & backtrace it with ping : Ok
root@roc-rk3399-pc:~# perf test -v inet_pton
86: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 1375
ping 1399 [000] 4114.417450: probe_libc:inet_pton: (ffffb3e26120)
106120 inet_pton+0x0 (/usr/lib/aarch64-linux-gnu/libc.so.6)
d18bc getaddrinfo+0xec (/usr/lib/aarch64-linux-gnu/libc.so.6)
2b68 [unknown] (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
root@roc-rk3399-pc:~#
And after it continues to work:
root@roc-rk3399-pc:~# grep -w tac ~acme/libexec/perf-core/tests/shell/record+probe_libc_inet_pton.sh
perf script -i $perf_data | tac | grep -m1 ^ping -B9 | tac > $perf_script
root@roc-rk3399-pc:~# perf test inet_pton
86: probe libc's inet_pton & backtrace it with ping : Ok
root@roc-rk3399-pc:~# perf test -v inet_pton
86: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 6995
ping 7019 [005] 4832.160741: probe_libc:inet_pton: (ffffa62e6120)
106120 inet_pton+0x0 (/usr/lib/aarch64-linux-gnu/libc.so.6)
d18bc getaddrinfo+0xec (/usr/lib/aarch64-linux-gnu/libc.so.6)
2b68 [unknown] (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
root@roc-rk3399-pc:~#
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/Y7QyPkPlDYip3cZH@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
77fe30fed1 |
perf tools: Fix segfault when trying to process tracepoints in perf.data and not linked with libtraceevent
When we have a perf.data file with tracepoints, such as:
# perf evlist -f
probe_perf:lzma_decompress_to_file
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
#
We end up segfaulting when using perf built with NO_LIBTRACEEVENT=1 by
trying to find an evsel with a NULL 'event_name' variable:
(gdb) run report --stdio -f
Starting program: /root/bin/perf report --stdio -f
Program received signal SIGSEGV, Segmentation fault.
0x000000000055219d in find_evsel (evlist=0xfda7b0, event_name=0x0) at util/sort.c:2830
warning: Source file is more recent than executable.
2830 if (event_name[0] == '%') {
Missing separate debuginfos, use: dnf debuginfo-install bzip2-libs-1.0.8-11.fc36.x86_64 cyrus-sasl-lib-2.1.27-18.fc36.x86_64 elfutils-debuginfod-client-0.188-3.fc36.x86_64 elfutils-libelf-0.188-3.fc36.x86_64 elfutils-libs-0.188-3.fc36.x86_64 glibc-2.35-20.fc36.x86_64 keyutils-libs-1.6.1-4.fc36.x86_64 krb5-libs-1.19.2-12.fc36.x86_64 libbrotli-1.0.9-7.fc36.x86_64 libcap-2.48-4.fc36.x86_64 libcom_err-1.46.5-2.fc36.x86_64 libcurl-7.82.0-12.fc36.x86_64 libevent-2.1.12-6.fc36.x86_64 libgcc-12.2.1-4.fc36.x86_64 libidn2-2.3.4-1.fc36.x86_64 libnghttp2-1.51.0-1.fc36.x86_64 libpsl-0.21.1-5.fc36.x86_64 libselinux-3.3-4.fc36.x86_64 libssh-0.9.6-4.fc36.x86_64 libstdc++-12.2.1-4.fc36.x86_64 libunistring-1.0-1.fc36.x86_64 libunwind-1.6.2-2.fc36.x86_64 libxcrypt-4.4.33-4.fc36.x86_64 libzstd-1.5.2-2.fc36.x86_64 numactl-libs-2.0.14-5.fc36.x86_64 opencsd-1.2.0-1.fc36.x86_64 openldap-2.6.3-1.fc36.x86_64 openssl-libs-3.0.5-2.fc36.x86_64 slang-2.3.2-11.fc36.x86_64 xz-libs-5.2.5-9.fc36.x86_64 zlib-1.2.11-33.fc36.x86_64
(gdb) bt
#0 0x000000000055219d in find_evsel (evlist=0xfda7b0, event_name=0x0) at util/sort.c:2830
#1 0x0000000000552416 in add_dynamic_entry (evlist=0xfda7b0, tok=0xffb6eb "trace", level=2) at util/sort.c:2976
#2 0x0000000000552d26 in sort_dimension__add (list=0xf93e00 <perf_hpp_list>, tok=0xffb6eb "trace", evlist=0xfda7b0, level=2) at util/sort.c:3193
#3 0x0000000000552e1c in setup_sort_list (list=0xf93e00 <perf_hpp_list>, str=0xffb6eb "trace", evlist=0xfda7b0) at util/sort.c:3227
#4 0x00000000005532fa in __setup_sorting (evlist=0xfda7b0) at util/sort.c:3381
#5 0x0000000000553cdc in setup_sorting (evlist=0xfda7b0) at util/sort.c:3608
#6 0x000000000042eb9f in cmd_report (argc=0, argv=0x7fffffffe470) at builtin-report.c:1596
#7 0x00000000004aee7e in run_builtin (p=0xf64ca0 <commands+288>, argc=3, argv=0x7fffffffe470) at perf.c:330
#8 0x00000000004af0f2 in handle_internal_command (argc=3, argv=0x7fffffffe470) at perf.c:384
#9 0x00000000004af241 in run_argv (argcp=0x7fffffffe29c, argv=0x7fffffffe290) at perf.c:428
#10 0x00000000004af5fc in main (argc=3, argv=0x7fffffffe470) at perf.c:562
(gdb)
So check if we have tracepoint events in add_dynamic_entry() and bail
out instead:
# perf report --stdio -f
This perf binary isn't linked with libtraceevent, can't process probe_perf:lzma_decompress_to_file
Error:
Unknown --sort key: `trace'
#
Fixes:
|
||
Ahelenia Ziemiańska
|
f24fb53984 |
perf tools: Don't include signature in version strings
This explodes the build if HEAD is signed, since the generated version is gpg: Signature made Mon 26 Dec 2022 20:34:48 CET, then a few more lines, then the SHA. Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/7c9637711271f50ec2341fb8a7c29585335dab04.1672174189.git.nabijaczleweli@nabijaczleweli.xyz Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Yang Jihong
|
55c41f2e4f |
perf help: Use HAVE_LIBTRACEEVENT to filter out unsupported commands
Commands such as kmem, kwork, lock, sched, trace and timechart depend on
libtraceevent, these commands need to be isolated using HAVE_LIBTRACEEVENT
macro when cmdlist generation.
The output of the generate-cmdlist.sh script is as follows:
# ./util/generate-cmdlist.sh
/* Automatically generated by ./util/generate-cmdlist.sh */
struct cmdname_help
{
char name[16];
char help[80];
};
static struct cmdname_help common_cmds[] = {
{"annotate", "Read perf.data (created by perf record) and display annotated code"},
{"archive", "Create archive with object files with build-ids found in perf.data file"},
{"bench", "General framework for benchmark suites"},
{"buildid-cache", "Manage build-id cache."},
{"buildid-list", "List the buildids in a perf.data file"},
{"c2c", "Shared Data C2C/HITM Analyzer."},
{"config", "Get and set variables in a configuration file."},
{"daemon", "Run record sessions on background"},
{"data", "Data file related processing"},
{"diff", "Read perf.data files and display the differential profile"},
{"evlist", "List the event names in a perf.data file"},
{"ftrace", "simple wrapper for kernel's ftrace functionality"},
{"inject", "Filter to augment the events stream with additional information"},
{"iostat", "Show I/O performance metrics"},
{"kallsyms", "Searches running kernel for symbols"},
{"kvm", "Tool to trace/measure kvm guest os"},
{"list", "List all symbolic event types"},
{"mem", "Profile memory accesses"},
{"record", "Run a command and record its profile into perf.data"},
{"report", "Read perf.data (created by perf record) and display the profile"},
{"script", "Read perf.data (created by perf record) and display trace output"},
{"stat", "Run a command and gather performance counter statistics"},
{"test", "Runs sanity tests."},
{"top", "System profiling tool."},
{"version", "display the version of perf binary"},
#ifdef HAVE_LIBELF_SUPPORT
{"probe", "Define new dynamic tracepoints"},
#endif /* HAVE_LIBELF_SUPPORT */
#if defined(HAVE_LIBTRACEEVENT) && (defined(HAVE_LIBAUDIT_SUPPORT) || defined(HAVE_SYSCALL_TABLE_SUPPORT))
{"trace", "strace inspired tool"},
#endif /* HAVE_LIBTRACEEVENT && (HAVE_LIBAUDIT_SUPPORT || HAVE_SYSCALL_TABLE_SUPPORT) */
#ifdef HAVE_LIBTRACEEVENT
{"kmem", "Tool to trace/measure kernel memory properties"},
{"kwork", "Tool to trace/measure kernel work properties (latencies)"},
{"lock", "Analyze lock events"},
{"sched", "Tool to trace/measure scheduler properties (latencies)"},
{"timechart", "Tool to visualize total system behavior during a workload"},
#endif /* HAVE_LIBTRACEEVENT */
};
Fixes:
|
||
Eric Lin
|
a8f54d9401 |
perf tools riscv: Fix build error on riscv due to missing header for 'struct perf_sample'
Since the definition of 'struct perf_sample' has been moved to sample.h,
we need to include this header file to fix the build error as follows:
arch/riscv/util/unwind-libdw.c: In function 'libdw__arch_set_initial_registers':
arch/riscv/util/unwind-libdw.c:12:50: error: invalid use of undefined type 'struct perf_sample'
12 | struct regs_dump *user_regs = &ui->sample->user_regs;
| ^~
Fixes:
|
||
Miaoqian Lin
|
0a6564ebd9 |
perf tools: Fix resources leak in perf_data__open_dir()
In perf_data__open_dir(), opendir() opens the directory stream. Add
missing closedir() to release it after use.
Fixes:
|
||
Po-Hsu Lin
|
1856628baa |
selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier
Return non-zero return value if there is any failure reported in this
script during the test. Otherwise it can only reflect the status of
the last command.
Fixes:
|
||
|
Po-Hsu Lin
|
9c4d7f45d6 |
selftests: net: fix cleanup_v6() for arp_ndisc_evict_nocarrier
The cleanup_v6() will cause the arp_ndisc_evict_nocarrier script exit
with 255 (No such file or directory), even the tests are good:
# selftests: net: arp_ndisc_evict_nocarrier.sh
# run arp_evict_nocarrier=1 test
# RTNETLINK answers: File exists
# ok
# run arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run all.arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run ndisc_evict_nocarrier=1 test
# ok
# run ndisc_evict_nocarrier=0 test
# ok
# run all.ndisc_evict_nocarrier=0 test
# ok
not ok 1 selftests: net: arp_ndisc_evict_nocarrier.sh # exit=255
This is because it's trying to modify the parameter for ipv4 instead.
Also, tests for ipv6 (run_ndisc_evict_nocarrier_enabled() and
run_ndisc_evict_nocarrier_disabled() are working on veth1, reflect
this fact in cleanup_v6().
Fixes:
|
||
|
Po-Hsu Lin
|
1573c68820 |
selftests: net: fix cmsg_so_mark.sh test hang
This cmsg_so_mark.sh test will hang on non-amd64 systems because of the infinity loop for argument parsing in cmsg_sender. Variable "o" in cs_parse_args() for taking getopt() should be an int, otherwise it will be 255 when getopt() returns -1 on non-amd64 system and thus causing infinity loop. Link: https://lore.kernel.org/lkml/CA+G9fYsM2k7mrF7W4V_TrZ-qDauWM394=8yEJ=-t1oUg8_40YA@mail.gmail.com/t/ Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Kuniyuki Iwashima
|
2c042e8e54 |
tcp: Add selftest for bind() and TIME_WAIT.
bhash2 split the bind() validation logic into wildcard and non-wildcard cases. Let's add a test to catch future regression. Before the previous patch: # ./bind_timewait TAP version 13 1..2 # Starting 2 tests from 3 test cases. # RUN bind_timewait.localhost.1 ... # bind_timewait.c:87:1:Expected ret (0) == -1 (-1) # 1: Test terminated by assertion # FAIL bind_timewait.localhost.1 not ok 1 bind_timewait.localhost.1 # RUN bind_timewait.addrany.1 ... # OK bind_timewait.addrany.1 ok 2 bind_timewait.addrany.1 # FAILED: 1 / 2 tests passed. # Totals: pass:1 fail:1 xfail:0 xpass:0 skip:0 error:0 After: # ./bind_timewait TAP version 13 1..2 # Starting 2 tests from 3 test cases. # RUN bind_timewait.localhost.1 ... # OK bind_timewait.localhost.1 ok 1 bind_timewait.localhost.1 # RUN bind_timewait.addrany.1 ... # OK bind_timewait.addrany.1 ok 2 bind_timewait.addrany.1 # PASSED: 2 / 2 tests passed. # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Kui-Feng Lee
|
b7793c8db7 |
selftests/bpf: add a test for iter/task_vma for short-lived processes
When a task iterator traverses vma(s), it is possible task->mm might become invalid in the middle of traversal and this may cause kernel misbehave (e.g., crash) This test case creates iterators repeatedly and forks short-lived processes in the background to detect this bug. The test will last for 3 seconds to get the chance to trigger the issue. Signed-off-by: Kui-Feng Lee <kuifeng@meta.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20221216221855.4122288-3-kuifeng@meta.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Alexei Starovoitov
|
8f161ca110 |
selftests/bpf: Temporarily disable part of btf_dump:var_data test.
Commit
|
||
Paolo Bonzini
|
a5496886eb |
Merge branch 'kvm-late-6.1-fixes' into HEAD
x86: * several fixes to nested VMX execution controls * fixes and clarification to the documentation for Xen emulation * do not unnecessarily release a pmu event with zero period * MMU fixes * fix Coverity warning in kvm_hv_flush_tlb() selftests: * fixes for the ucall mechanism in selftests * other fixes mostly related to compilation with clang |