This avoids reported warnings when the packages are not installed.
[namhyung]: Removed the dummy assignment and unnecessary ifeq checks.
Fixes: 0f0e1f4456 ("perf build: Use pkg-config for feature check for libtrace{event,fs}")
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/r/20240628203432.3273625-1-amadio@gentoo.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
dsos__add would add at the end of the dso array possibly requiring a
later find to re-sort the array. Patterns of find then add were
becoming O(n*log n) due to the sorts. Change the add routine to be
O(n) rather than O(1) but to maintain the sorted-ness of the dsos
array so that later finds don't need the O(n*log n) sort.
Fixes: 3f4ac23a99 ("perf dsos: Switch backing storage to array from rbtree/list")
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Steinar Gunderson <sesse@google.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Matt Fleming <matt@readmodwrite.com>
Link: https://lore.kernel.org/r/20240703172117.810918-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The array is sorted, so just move the elements and insert in order.
Fixes: 13ca628716 ("perf comm: Add reference count checking to 'struct comm_str'")
Reported-by: Matt Fleming <matt@readmodwrite.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Matt Fleming <matt@readmodwrite.com>
Cc: Steinar Gunderson <sesse@google.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240703172117.810918-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In the past, the exclude_guest setting has had no effect on Intel PT
tracing, but that may not be the case in the future.
Set the flag correctly based upon whether KVM is using Intel PT
"Host/Guest" mode, which is determined by the kvm_intel module
parameter pt_mode:
pt_mode=0 System-wide mode : host and guest output to host buffer
pt_mode=1 Host/Guest mode : host/guest output to host/guest
buffers respectively
Fixes: 6e86bfdc4a ("perf intel-pt: Support decoding of guest kernel")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240625104532.11990-3-adrian.hunter@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
aux_watermark is a u32. For a 64-bit size, cap the aux_watermark
calculation at UINT_MAX instead of truncating it to 32-bits.
Fixes: 874fc35cdd ("perf intel-pt: Use aux_watermark")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240625104532.11990-2-adrian.hunter@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Merge fixes and updates in v6.10 into perf-tools-next to resolve changes
in synthesizing the LOST_SAMPLES records and build fixes.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Currently, the -r/--repeat option accepts values from 0 and complains
for -1. The help section specifies:
-r, --repeat <n> repeat the workload replay N times (-1: infinite)
The -r -1 option raises an error because replay_repeat is defined as
an unsigned int.
In the current implementation, the workload is repeated n times when
-r <n> is used, except when n is 0.
When -r is set to 0, the workload is also repeated once. This happens
because when -r=0, the run_one_test function is not called. (Note that
mutex unlocking, which is essential for child threads spawned to emulate
the workload, happens in run_one_test.) However, mutex unlocking is
still performed in the destroy_tasks function. Thus, -r=0 results in the
workload running once coincidentally.
To clarify and maintain the existing logic for -r >= 1 (which runs the
workload the specified number of times) and to fix the issue with infinite
runs, make -r=0 perform an infinite run.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240628071821.15264-1-vineethr@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
It didn't use the passed field separator (using -x option) when it
prints the metric headers and always put "," between the fields.
Before:
$ sudo ./perf stat -a -x : --per-core -M tma_core_bound --metric-only true
core,cpus,% tma_core_bound: <<<--- here: "core,cpus," but ":" expected
S0-D0-C0:2:10.5:
S0-D0-C1:2:14.8:
S0-D0-C2:2:9.9:
S0-D0-C3:2:13.2:
After:
$ sudo ./perf stat -a -x : --per-core -M tma_core_bound --metric-only true
core:cpus:% tma_core_bound:
S0-D0-C0:2:10.5:
S0-D0-C1:2:15.0:
S0-D0-C2:2:16.5:
S0-D0-C3:2:12.5:
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20240628000604.1296808-2-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The new --per-cluster option was added recently but it forgot to update
the aggr_header fields which are used for --metric-only option. And it
resulted in a segfault due to NULL string in fputs().
Fixes: cbc917a1b0 ("perf stat: Support per-cluster aggregation")
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20240628000604.1296808-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Arm PMUs have a suffix, either a single decimal (armv8_pmuv3_0) or 3 hex
digits which (armv8_cortex_a53) which Perf assumes are both strippable
suffixes for the purposes of deduplication. S390 "cpum_cf" is a
similarly suffixed core PMU but is only two characters so is not treated
as strippable because the rules are a minimum of 3 hex characters or 1
decimal character.
There are two paths involved in listing PMU events:
* HW/cache event printing assumes core PMUs don't have suffixes so
doesn't try to strip.
* Sysfs PMU events share the printing function with uncore PMUs which
strips.
This results in slightly inconsistent Perf list behavior if a core PMU
has a suffix:
# perf list
...
armv8_pmuv3_0/branch-load-misses/
armv8_pmuv3/l3d_cache_wb/ [Kernel PMU event]
...
Fix it by partially reverting back to the old list behavior where
stripping was only done for uncore PMUs. For example commit 8d9f5146f5
("perf pmus: Sort pmus by name then suffix") mentions that only PMUs
starting 'uncore_' are considered to have a potential suffix. This
change doesn't go back that far, but does only strip PMUs that are
!is_core. This keeps the desirable behavior where the many possibly
duplicated uncore PMUs aren't repeated, but it doesn't break listing for
core PMUs.
Searching for a PMU continues to use the new stripped comparison
functions, meaning that it's still possible to request an event by
specifying the common part of a PMU name, or even open events on
multiple similarly named PMUs. For example:
# perf stat -e armv8_cortex/inst_retired/
5777173628 armv8_cortex_a53/inst_retired/ (99.93%)
7469626951 armv8_cortex_a57/inst_retired/ (49.88%)
Fixes: 3241d46f5f ("perf pmus: Sort/merge/aggregate PMUs like mrvl_ddr_pmu")
Suggested-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: robin.murphy@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240626145448.896746-3-james.clark@arm.com
Commit b2b9d3a3f0 ("perf pmu: Support wildcards on pmu name in dynamic
pmu events") gives the following example for wildcarding a subset of
PMUs:
E.g., in a system with the following dynamic pmus:
mypmu_0
mypmu_1
mypmu_2
mypmu_4
perf stat -e mypmu_[01]/<config>/
Since commit f91fa2ae63 ("perf pmu: Refactor perf_pmu__match()"), only
"*" has been supported, removing the ability to subset PMUs, even though
parse-events.l still supports ? and [] characters.
Fix it by using fnmatch() when any glob character is detected and add a
test which covers that and other scenarios of
perf_pmu__match_ignoring_suffix().
Fixes: f91fa2ae63 ("perf pmu: Refactor perf_pmu__match()")
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: robin.murphy@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240626145448.896746-2-james.clark@arm.com
It's possible to save pipe output of perf record into a file.
$ perf record -o- ... > pipe.data
And you can use the data same as the normal perf data.
$ perf report -i pipe.data
In that case, perf tools will treat the input as a pipe, but it can get
the total size of the input. This means it can show the progress bar
unlike the normal pipe input (which doesn't know the total size in
advance).
While at it, fix the string in __perf_session__process_dir_events().
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240627181916.1202110-1-namhyung@kernel.org
The test has been failing for some time when two separate runs of
perf benchmarks are recorded for cycles events and their counts are
compared, while once the recording was done with option --bpf-counters
and once without it. It is expected that the count of the samples
should be within a certain range, firstly the difference was set to be
within 10%, which was then later raised to 20%. However, the test case
keeps failing on certain architectures as recording the provided
benchmark can produce completely different counts based on the
current load of the system.
Sampling two separate runs on intel-eaglestream-spr-13 of "perf stat
--no-big-num -e cycles -- perf bench sched messaging -g 1 -l 100 -t":
Performance counter stats for 'perf bench sched messaging -g 1 -l 100 -t':
396782898 cycles
0.010051983 seconds time elapsed
0.008664000 seconds user
0.097058000 seconds sys
Performance counter stats for 'perf bench sched messaging -g 1 -l 100 -t':
1431133032 cycles
0.021803714 seconds time elapsed
0.023377000 seconds user
0.349918000 seconds sys
, which is ranging from 400mil to 1400mil samples.
Instead of recording the cycles use instructions event, which provides
more stable values. At the same time change the tested workload to one
of the provided testing workloads by perf that is not based on a
scheduler, which can provide another dependency on the current load.
Sampling instructions event with the new workload provide much more
stable results on intel-eaglestream-spr-13 of "perf stat --no-big-num
-e instructions -- perf test -w brstack":
Performance counter stats for 'perf test -w brstack':
64584494 instructions
0.009173945 seconds time elapsed
0.007262000 seconds user
0.002071000 seconds sys
Performance counter stats for 'perf test -w brstack':
64672669 instructions
0.008888135 seconds time elapsed
0.005018000 seconds user
0.004018000 seconds sys
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: mpetlan@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625092001.10909-1-vmolnaro@redhat.com
The python build now depends on libraries and doesn't use
python-ext-sources except for the util/python.c dependency. Switch to
just directly depending on that file and util/setup.py. This allows
the removal of python-ext-sources.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625214117.953777-9-irogers@google.com
setup.py was building most perf sources causing setup.py to mimic the
Makefile logic as well as flex/bison code to be stubbed out, due to
complexity building. By using libraries fewer functions are stubbed
out, the build is faster and the Makefile logic is reused which should
simplify updating. The libraries are passed through LDFLAGS to avoid
complexity in python.
Force the -fPIC flag for libbpf.a to ensure it is suitable for linking
into the perf python module.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625214117.953777-8-irogers@google.com
Make the util directory into its own library. This is done to avoid
compiling code twice, once for the perf tool and once for the perf
python module. For convenience:
arch/common.c
scripts/perl/Perf-Trace-Util/Context.c
scripts/python/Perf-Trace-Util/Context.c
are made part of this library.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625214117.953777-7-irogers@google.com
Make the benchmark code into a library so it may be linked against
things like the python module to avoid compiling code twice.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625214117.953777-6-irogers@google.com
Make the tests code its own library. This is done to avoid compiling
code twice, once for the perf tool and once for the perf python
module.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625214117.953777-5-irogers@google.com
Make pmu-events into a library so it may be linked against things like
the python module and not built from source.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625214117.953777-4-irogers@google.com
Make the ui code its own library. This is done to avoid compiling code
twice, once for the perf tool and once for the perf python module.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625214117.953777-3-irogers@google.com
Fix some excessively long lines by deploying '\'.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625214117.953777-2-irogers@google.com
Guilherme reported a crash in perf mem record. It's because the
perf_mem_event->name was NULL on his machine. It should just return
a NULL string when it has no format string in the name.
The backtrace at the crash is below:
Program received signal SIGSEGV, Segmentation fault.
__strchrnul_avx2 () at ../sysdeps/x86_64/multiarch/strchr-avx2.S:67
67 vmovdqu (%rdi), %ymm2
(gdb) bt
#0 __strchrnul_avx2 () at ../sysdeps/x86_64/multiarch/strchr-avx2.S:67
#1 0x00007ffff6c982de in __find_specmb (format=0x0) at printf-parse.h:82
#2 __printf_buffer (buf=buf@entry=0x7fffffffc760, format=format@entry=0x0, ap=ap@entry=0x7fffffffc880,
mode_flags=mode_flags@entry=0) at vfprintf-internal.c:649
#3 0x00007ffff6cb7840 in __vsnprintf_internal (string=<optimized out>, maxlen=<optimized out>, format=0x0,
args=0x7fffffffc880, mode_flags=mode_flags@entry=0) at vsnprintf.c:96
#4 0x00007ffff6cb787f in ___vsnprintf (string=<optimized out>, maxlen=<optimized out>, format=<optimized out>,
args=<optimized out>) at vsnprintf.c:103
#5 0x00005555557b9391 in scnprintf (buf=0x555555fe9320 <mem_loads_name> "", size=100, fmt=0x0)
at ../lib/vsprintf.c:21
#6 0x00005555557b74c3 in perf_pmu__mem_events_name (i=0, pmu=0x555556832180) at util/mem-events.c:106
#7 0x00005555557b7ab9 in perf_mem_events__record_args (rec_argv=0x55555684c000, argv_nr=0x7fffffffca20)
at util/mem-events.c:252
#8 0x00005555555e370d in __cmd_record (argc=3, argv=0x7fffffffd760, mem=0x7fffffffcd80) at builtin-mem.c:156
#9 0x00005555555e49c4 in cmd_mem (argc=4, argv=0x7fffffffd760) at builtin-mem.c:514
#10 0x000055555569716c in run_builtin (p=0x555555fcde80 <commands+672>, argc=8, argv=0x7fffffffd760) at perf.c:349
#11 0x0000555555697402 in handle_internal_command (argc=8, argv=0x7fffffffd760) at perf.c:402
#12 0x0000555555697560 in run_argv (argcp=0x7fffffffd59c, argv=0x7fffffffd590) at perf.c:446
#13 0x00005555556978a6 in main (argc=8, argv=0x7fffffffd760) at perf.c:562
Reported-by: Guilherme Amadio <amadio@cern.ch>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Closes: https://lore.kernel.org/linux-perf-users/Zlns_o_IE5L28168@cern.ch
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240621170528.608772-5-namhyung@kernel.org
A compiler warning on the second argument of bsearch() should not be
NULL, but there's a case we might pass it. Let's return early if we
don't have any DSOs to search in __dsos__find_by_longname_id().
util/dsos.c:184:8: runtime error: null pointer passed as argument 2, which is declared to never be null
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Closes: https://lore.kernel.org/oe-lkp/202406180932.84be448c-oliver.sang@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240621170528.608772-4-namhyung@kernel.org
In dso__load(), it checks if the dso is a kernel module by looking the
symtab type. Actually dso has 'is_kmod' field to check that easily and
dso__set_module_info() set the symtab type and the is_kmod bit. So it
should have the same result to check the is_kmod bit.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240621170528.608772-3-namhyung@kernel.org
It's expected that both hist entries are in the same hists when
comparing two. But the current code in the function checks one without
dso sort key and other with the key. This would make the condition true
in any case.
I guess the intention of the original commit was to add '!' for the
right side too. But as it should be the same, let's just remove it.
Fixes: 69849fc5d2 ("perf hists: Move sort__has_dso into struct perf_hpp_list")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240621170528.608772-2-namhyung@kernel.org
In the previous loop, all the members in the aliases[j-1] have been freed
and set to NULL. But in this loop, the function pmu_alias_is_duplicate()
compares the aliases[j] with the aliases[j-1] that has already been
disposed, so the function will always return false and duplicate aliases
will never be discarded.
If we find duplicate aliases, it skips the zfree aliases[j], which is
accompanied by a memory leak.
We can use the next aliases[j+1] to theck for duplicate aliases to
fixes the aliases NULL pointer dereference, then goto zfree code snippet
to release it.
After patch testing:
$ perf list --unit=hisi_sicl,cpa pmu
uncore cpa:
cpa_p0_rd_dat_32b
[Number of read ops transmitted by the P0 port which size is 32 bytes.
Unit: hisi_sicl,cpa]
cpa_p0_rd_dat_64b
[Number of read ops transmitted by the P0 port which size is 64 bytes.
Unit: hisi_sicl,cpa]
Fixes: c3245d2093 ("perf pmu: Abstract alias/event struct")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Cc: ravi.bangoria@amd.com
Cc: james.clark@arm.com
Cc: prime.zeng@hisilicon.com
Cc: cuigaosheng1@huawei.com
Cc: jonathan.cameron@huawei.com
Cc: linuxarm@huawei.com
Cc: yangyicong@huawei.com
Cc: robh@kernel.org
Cc: renyu.zj@linux.alibaba.com
Cc: kjain@linux.ibm.com
Cc: john.g.garry@oracle.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240614094318.11607-1-hejunhao3@huawei.com
Add malloc() failure handling in unread_unwind_spec_debug_frame().
This make caller find_proc_info() works well when the allocation failure.
Signed-off-by: Yunseong Kim <yskelg@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Austin Kim <austindh.kim@gmail.com>
Cc: shjy180909@gmail.com
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Leo Yan <leo.yan@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240619204211.6438-2-yskelg@gmail.com
This patch resolve following warning.
tools/perf/util/evsel.c:1620:9: error: result of comparison of constant
-1 with expression of type 'char' is always false
-Werror,-Wtautological-constant-out-of-range-compare
1620 | if (c == -1)
| ~ ^ ~~
Signed-off-by: Yunseong Kim <yskelg@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Austin Kim <austindh.kim@gmail.com>
Cc: shjy180909@gmail.com
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Leo Yan <leo.yan@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240619203428.6330-2-yskelg@gmail.com
When using perf timehist, sch delay is only computed for a waking task,
not for a pre empted task. This patches changes sch delay to account for
both. This makes sense as testing scheduling policy need to consider the
effect of scheduling delay globally, not only for waking tasks.
Example of `perf timehist` report before the patch for `stress` task
competing with each other.
First column is wait time, second column sch delay, third column
runtime.
1.492060 [0000] s stress[81] 1.999 0.000 2.000 R next: stress[83]
1.494060 [0000] s stress[83] 2.000 0.000 2.000 R next: stress[81]
1.496060 [0000] s stress[81] 2.000 0.000 2.000 R next: stress[83]
1.498060 [0000] s stress[83] 2.000 0.000 1.999 R next: stress[81]
After the patch, it looks like this (note that all wait time is not zero
anymore):
1.492060 [0000] s stress[81] 1.999 1.999 2.000 R next: stress[83]
1.494060 [0000] s stress[83] 2.000 2.000 2.000 R next: stress[81]
1.496060 [0000] s stress[81] 2.000 2.000 2.000 R next: stress[83]
1.498060 [0000] s stress[83] 2.000 2.000 1.999 R next: stress[81]
Signed-off-by: Fernand Sieber <sieberf@amazon.com>
Reviewed-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240618090339.87482-1-sieberf@amazon.com
Add samples of APX and other new instructions to the 'x86 instruction
decoder - new instructions' test.
Note the test is only available if the perf tool has been built with
EXTRA_TESTS=1.
Example:
$ make EXTRA_TESTS=1 -C tools/perf
$ tools/perf/perf test -F -v 'new ins' |& grep -i 'jmpabs\|popp\|pushp'
Decoded ok: d5 00 a1 ef cd ab 90 78 56 34 12 jmpabs $0x1234567890abcdef
Decoded ok: d5 08 53 pushp %rbx
Decoded ok: d5 18 50 pushp %r16
Decoded ok: d5 19 57 pushp %r31
Decoded ok: d5 19 5f popp %r31
Decoded ok: d5 18 58 popp %r16
Decoded ok: d5 08 5b popp %rbx
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Nikolay Borisov <nik.borisov@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-11-adrian.hunter@intel.com
JMPABS is 64-bit absolute direct jump instruction, encoded with a mandatory
REX2 prefix. JMPABS is designed to be used in the procedure linkage table
(PLT) to replace indirect jumps, because it has better performance. In that
case the jump target will be amended at run time. To enable Intel PT to
follow the code, a TIP packet is always emitted when JMPABS is traced under
Intel PT.
Refer to the Intel Advanced Performance Extensions (Intel APX) Architecture
Specification for details.
Decode JMPABS as an indirect jump, because it has an associated TIP packet
the same as an indirect jump and the control flow should follow the TIP
packet payload, and not assume it is the same as the on-file object code
JMPABS target address.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Nikolay Borisov <nik.borisov@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-10-adrian.hunter@intel.com
Test "perf probe of function from different CU" only checks if the perf
command has failed and doesn't test the --funcs output. In the issue
reported in the previous commit, the garbage output of the --funcs
command was being ignored by the test when it could have been caught.
The script first makes use of --funcs option with the perf probe command
to check if the function "foo" exists in the testfile before adding a
probe to it in the next command. The output of probe...--funcs command
is redirected to stdout, therefore, add '| grep "foo"' to validate the
result.
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: anshuman.khandual@arm.com
Cc: james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240601125946.1741414-11-ChaitanyaS.Prakash@arm.com
perf test "perf script tests" fails as below in systems
with python 3.6
File "/home/athira/linux/tools/perf/tests/shell/../../scripts/python/parallel-perf.py", line 442
if line := p.stdout.readline():
^
SyntaxError: invalid syntax
--- Cleaning up ---
---- end(-1) ----
92: perf script tests: FAILED!
This happens because ":=" is a new syntax that assigns values
to variables as part of a larger expression. This is introduced
from python 3.8 and hence fails in setup with python 3.6
Address this by splitting the large expression and check the
value in two steps:
Previous line: if line := p.stdout.readline():
Current change:
line = p.stdout.readline()
if line:
With patch
./perf test "perf script tests"
93: perf script tests: Ok
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: akanksha@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240623064850.83720-3-atrajeev@linux.vnet.ibm.com
commit 80d496be89 ("perf report: Add support for profiling JIT
generated code") added support for profiling JIT generated code.
This patch handles dso's of form "/tmp/perf-$PID.map".
Some of the references doesn't check exactly for same pattern.
some uses "if (!strncmp(dso_name, "/tmp/perf-", 10))". Fix
this by using helper function perf_pid_map_tid and
is_perf_pid_map_name which looks for proper pattern of
form: "/tmp/perf-$PID.map" for these checks.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: akanksha@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240623064850.83720-2-atrajeev@linux.vnet.ibm.com
Perf test for perf probe of function from different CU fails
as below:
./perf test -vv "test perf probe of function from different CU"
116: test perf probe of function from different CU:
--- start ---
test child forked, pid 2679
Failed to find symbol foo in /tmp/perf-uprobe-different-cu-sh.Msa7iy89bx/testfile
Error: Failed to add events.
--- Cleaning up ---
"foo" does not hit any event.
Error: Failed to delete events.
---- end(-1) ----
116: test perf probe of function from different CU : FAILED!
The test does below to probe function "foo" :
# gcc -g -Og -flto -c /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.c
-o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.o
# gcc -g -Og -c /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.c
-o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.o
# gcc -g -Og -o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile
/tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.o
/tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.o
# ./perf probe -x /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile foo
Failed to find symbol foo in /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile
Error: Failed to add events.
Perf probe fails to find symbol foo in the executable placed in
/tmp/perf-uprobe-different-cu-sh.XniNxNEVT7
Simple reproduce:
# mktemp -d /tmp/perf-checkXXXXXXXXXX
/tmp/perf-checkcWpuLRQI8j
# gcc -g -o test test.c
# cp test /tmp/perf-checkcWpuLRQI8j/
# nm /tmp/perf-checkcWpuLRQI8j/test | grep foo
00000000100006bc T foo
# ./perf probe -x /tmp/perf-checkcWpuLRQI8j/test foo
Failed to find symbol foo in /tmp/perf-checkcWpuLRQI8j/test
Error: Failed to add events.
But it works with any files like /tmp/perf/test. Only for
patterns with "/tmp/perf-", this fails.
Further debugging, commit 80d496be89 ("perf report: Add support
for profiling JIT generated code") added support for profiling JIT
generated code. This patch handles dso's of form
"/tmp/perf-$PID.map" .
The check used "if (strncmp(self->name, "/tmp/perf-", 10) == 0)"
to match "/tmp/perf-$PID.map". With this commit, any dso in
/tmp/perf- folder will be considered separately for processing
(not only JIT created map files ). Fix this by changing the
string pattern to check for "/tmp/perf-%d.map". Add a helper
function is_perf_pid_map_name to do this check. In "struct dso",
dso->long_name holds the long name of the dso file. Since the
/tmp/perf-$PID.map check uses the complete name, use dso___long_name for
the string name.
With the fix,
# ./perf test "test perf probe of function from different CU"
117: test perf probe of function from different CU : Ok
Fixes: 56cbeacf14 ("perf probe: Add test for regression introduced by switch to die_get_decl_file()")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: akanksha@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240623064850.83720-1-atrajeev@linux.vnet.ibm.com
The 2 second sleep can cause the test to fail on very slow network file
systems because Perf ends up being killed before it finishes starting
up.
Fix it by making the leafloop workload end after a fixed time like the
other workloads so there is no need to kill it after 2 seconds.
Also remove the 1 second start sampling delay because it is similarly
fragile. Instead, search through all samples for a matching one, rather
than just checking the first sample and hoping it's in the right place.
Fixes: cd6382d827 ("perf test arm64: Test unwinding using fame-pointer (fp) mode")
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: German Gomez <german.gomez@arm.com>
Cc: Spoorthy S <spoorts2@in.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240612140316.3006660-1-james.clark@arm.com
When either of these have a shorter version, like 1.8, the expression
that computes the version has a syntax error that can be seen in the
output of make:
expr: syntax error: missing argument after +
Link: https://bugs.gentoo.org/917559
Reported-by: Peter Volkov <peter.volkov@gmail.com>
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240606153625.2255470-3-amadio@gentoo.org
Needed to add required include directories for the feature detection
to succeed. The header tracefs.h is installed either into the include
directory /usr/include/tracefs/tracefs.h when using the Makefile, or
into /usr/include/libtracefs/tracefs.h when using meson to build
libtracefs. The header tracefs.h uses #include <event-parse.h> from
libtraceevent, so pkg-config needs to pick the correct include directory
for libtracefs and add the one for libtraceevent to succeed.
Note that in baa2ca59ec the variable
LIBTRACEEVENT_DIR was introduced, and now the method to compile against
non-standard locations requires PKG_CONFIG_PATH to be set instead, which
works for both libtraceevent and libtracefs.
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240606153625.2255470-2-amadio@gentoo.org
The hard-coded metrics is wrongly calculated on the hybrid machine.
$ perf stat -e cycles,instructions -a sleep 1
Performance counter stats for 'system wide':
18,205,487 cpu_atom/cycles/
9,733,603 cpu_core/cycles/
9,423,111 cpu_atom/instructions/ # 0.52 insn per cycle
4,268,965 cpu_core/instructions/ # 0.23 insn per cycle
The insn per cycle for cpu_core should be 4,268,965 / 9,733,603 = 0.44.
When finding the metric events, the find_stat() doesn't take the PMU
type into account. The cpu_atom/cycles/ is wrongly used to calculate
the IPC of the cpu_core.
In the hard-coded metrics, the events from a different PMU are only
SW_CPU_CLOCK and SW_TASK_CLOCK. They both have the stat type,
STAT_NSECS. Except the SW CLOCK events, check the PMU type as well.
Fixes: 0a57b91080 ("perf stat: Use counts rather than saved_value")
Reported-by: Khalil, Amiri <amiri.khalil@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240606180316.4122904-1-kan.liang@linux.intel.com
Add counter information necessary for optimizing event grouping the
perf tool.
The most recent RFC patch set using this information:
https://lore.kernel.org/lkml/20240412210756.309828-1-weilin.wang@intel.com/
The information was added in:
475892a969
and later patches.
Co-authored-by: Weilin Wang <weilin.wang@intel.com>
Co-authored-by: Caleb Biggers <caleb.biggers@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240620181752.3945845-38-irogers@google.com
Add counter information necessary for optimizing event grouping the
perf tool.
The most recent RFC patch set using this information:
https://lore.kernel.org/lkml/20240412210756.309828-1-weilin.wang@intel.com/
The information was added in:
475892a969
and later patches.
Co-authored-by: Weilin Wang <weilin.wang@intel.com>
Co-authored-by: Caleb Biggers <caleb.biggers@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240620181752.3945845-37-irogers@google.com
Add counter information necessary for optimizing event grouping the
perf tool.
The most recent RFC patch set using this information:
https://lore.kernel.org/lkml/20240412210756.309828-1-weilin.wang@intel.com/
The information was added in:
475892a969
and later patches.
Co-authored-by: Weilin Wang <weilin.wang@intel.com>
Co-authored-by: Caleb Biggers <caleb.biggers@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240620181752.3945845-36-irogers@google.com
Update events from v1.15 to v1.16.
Update TMA metrics from v4.7 to v4.8.
Bring in the event updates v1.16:
43f3b8d6f8
The TMA 4.8 information was added in:
59194d4d90
Add counter information. The most recent RFC patch set using this
information:
https://lore.kernel.org/lkml/20240412210756.309828-1-weilin.wang@intel.com/
Co-authored-by: Weilin Wang <weilin.wang@intel.com>
Co-authored-by: Caleb Biggers <caleb.biggers@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240620181752.3945845-35-irogers@google.com
Update/remove events as per v1.23:
9debd874e1
Add counter information necessary for optimizing event grouping the
perf tool.
The most recent RFC patch set using this information:
https://lore.kernel.org/lkml/20240412210756.309828-1-weilin.wang@intel.com/
The information was added in:
475892a969
and later patches.
Co-authored-by: Weilin Wang <weilin.wang@intel.com>
Co-authored-by: Caleb Biggers <caleb.biggers@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240620181752.3945845-34-irogers@google.com
