qdio_handle_activate_check() tries to re-use one of the queue-specific
handlers to report that the ACTIVATE ccw has been terminated. But the
logic to select that handler is overly complex - in practice both
qdio drivers have at least one Input Queue, so we never take the other
paths.
Make things more obvious by removing this unused code, and clearly
spelling out that we re-use the Input Handler for generic error
reporting. This also paves the way for a world without queue-specific
error handlers.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add an implementation of the ChaCha20 stream cipher (see e.g. RFC 7539)
that makes use of z13's vector instruction set extension.
The original implementation is by Andy Polyakov which is
adapted for kernel use.
Four to six blocks are processed in parallel resulting in a performance
gain for inputs >= 256 bytes.
chacha20-generic
1 operation in 622 cycles (256 bytes)
1 operation in 2346 cycles (1024 bytes)
chacha20-s390
1 operation in 218 cycles (256 bytes)
1 operation in 647 cycles (1024 bytes)
Cc: Andy Polyakov <appro@openssl.org>
Reviewed-by: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When running without MIO support, with pci=nomio or for devices which
are not MIO-capable the zPCI subsystem generates pseudo-MMIO addresses
to allow access to PCI BARs via MMIO based Linux APIs even though the
platform uses function handles and BAR numbers.
This is done by stashing an index into our global IOMAP array which
contains the function handle in the 16 most significant bits of the
addresses returned by ioremap() always setting the most significant bit.
On the other hand the MIO addresses assigned by the platform for use,
while requiring special instructions, allow PCI access with virtually
mapped physical addresses. Now the problem is that these MIO addresses
and our own pseudo-MMIO addresses may overlap, while functionally this
would not be a problem by itself this overlap is detected by common code
as both address types are added as resources in the iomem_resource tree.
This leads to the overlapping resource claim of either the MIO capable
or non-MIO capable devices with being rejected.
Since PCI is tightly coupled to the use of the iomem_resource tree, see
for example the code for request_mem_region(), we can't reasonably get
rid of the overlap being detected by keeping our pseudo-MMIO addresses
out of the iomem_resource tree.
Instead let's move the range used by our own pseudo-MMIO addresses by
starting at (1UL << 62) and only using addresses below (1UL << 63) thus
avoiding the range currently used for MIO addresses.
Fixes: c7ff0e918a ("s390/pci: deal with devices that have no support for MIO instructions")
Cc: stable@vger.kernel.org # 5.3+
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Building with clang & LLVM_IAS=1 leads to an error:
arch/s390/lib/test_unwind.c:179:4: error: invalid register pair
" mvcl %%r1,%%r1\n"
^
The test creates an invalid instruction that would trap at runtime, but the
LLVM inline assembler tries to validate it at compile time too.
Use the raw instruction opcode instead.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1421
Link: https://lore.kernel.org/r/20211117174822.3632412-1-ilie.halip@gmail.com
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[hca@linux.ibm.com: use illegal opcode, and update comment]
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Now that all architectures have a working futex implementation in any
configuration, remove the runtime detection code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20211026100432.1730393-2-arnd@kernel.org
- Add missing Kconfig option for ftrace direct multi sample, so it can
be compiled again, and also add s390 support for this sample.
- Update Christian Borntraeger's email address.
- Various fixes for memory layout setup. Besides other this makes it
possible to load shared DCSS segments again.
- Fix copy to user space of swapped kdump oldmem.
- Remove -mstack-guard and -mstack-size compile options when building
vdso binaries. This can happen when CONFIG_VMAP_STACK is disabled
and results in broken vdso code which causes more or less random
exceptions. Also remove the not needed -nostdlib option.
- Fix memory leak on cpu hotplug and return code handling in kexec
code.
- Wire up futex_waitv system call.
- Replace snprintf with sysfs_emit where appropriate.
-----BEGIN PGP SIGNATURE-----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=n7BA
-----END PGP SIGNATURE-----
Merge tag 's390-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add missing Kconfig option for ftrace direct multi sample, so it can
be compiled again, and also add s390 support for this sample.
- Update Christian Borntraeger's email address.
- Various fixes for memory layout setup. Besides other this makes it
possible to load shared DCSS segments again.
- Fix copy to user space of swapped kdump oldmem.
- Remove -mstack-guard and -mstack-size compile options when building
vdso binaries. This can happen when CONFIG_VMAP_STACK is disabled and
results in broken vdso code which causes more or less random
exceptions. Also remove the not needed -nostdlib option.
- Fix memory leak on cpu hotplug and return code handling in kexec
code.
- Wire up futex_waitv system call.
- Replace snprintf with sysfs_emit where appropriate.
* tag 's390-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
ftrace/samples: add s390 support for ftrace direct multi sample
ftrace/samples: add missing Kconfig option for ftrace direct multi sample
MAINTAINERS: update email address of Christian Borntraeger
s390/kexec: fix memory leak of ipl report buffer
s390/kexec: fix return code handling
s390/dump: fix copying to user-space of swapped kdump oldmem
s390: wire up sys_futex_waitv system call
s390/vdso: filter out -mstack-guard and -mstack-size
s390/vdso: remove -nostdlib compiler flag
s390: replace snprintf in show functions with sysfs_emit
s390/boot: simplify and fix kernel memory layout setup
s390/setup: re-arrange memblock setup
s390/setup: avoid using memblock_enforce_memory_limit
s390/setup: avoid reserving memory above identity mapping
Pull exit-vs-signal handling fixes from Eric Biederman:
"This is a small set of changes where debuggers were no longer able to
intercept synchronous SIGTRAP and SIGSEGV, introduced by the exit
cleanups.
This is essentially the change you suggested with all of i's dotted
and the t's crossed so that ptrace can intercept all of the cases it
has been able to intercept the past, and all of the cases that made it
to exit without giving ptrace a chance still don't give ptrace a
chance"
* 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Replace force_fatal_sig with force_exit_sig when in doubt
signal: Don't always set SA_IMMUTABLE for forced signals
Recently to prevent issues with SECCOMP_RET_KILL and similar signals
being changed before they are delivered SA_IMMUTABLE was added.
Unfortunately this broke debuggers[1][2] which reasonably expect
to be able to trap synchronous SIGTRAP and SIGSEGV even when
the target process is not configured to handle those signals.
Add force_exit_sig and use it instead of force_fatal_sig where
historically the code has directly called do_exit. This has the
implementation benefits of going through the signal exit path
(including generating core dumps) without the danger of allowing
userspace to ignore or change these signals.
This avoids userspace regressions as older kernels exited with do_exit
which debuggers also can not intercept.
In the future is should be possible to improve the quality of
implementation of the kernel by changing some of these force_exit_sig
calls to force_fatal_sig. That can be done where it matters on
a case-by-case basis with careful analysis.
Reported-by: Kyle Huey <me@kylehuey.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
[1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com
[2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020
Fixes: 00b06da29c ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed")
Fixes: a3616a3c02 ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die")
Fixes: 83a1f27ad7 ("signal/powerpc: On swapcontext failure force SIGSEGV")
Fixes: 9bc508cf07 ("signal/s390: Use force_sigsegv in default_trap_handler")
Fixes: 086ec444f8 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig")
Fixes: c317d306d5 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails")
Fixes: 695dd0d634 ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit")
Fixes: 1fbd60df8a ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.")
Fixes: 941edc5bf1 ("exit/syscall_user_dispatch: Send ordinary signals on failure")
Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* Cleanups for the perf test infrastructure and mapping hugepages
* Avoid contention on mmap_sem when the guests start to run
* Add event channel upcall support to xen_shinfo_test
x86 changes:
* Fixes for Xen emulation
* Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache
* Fixes for migration of 32-bit nested guests on 64-bit hypervisor
* Compilation fixes
* More SEV cleanups
Generic:
* Cap the return value of KVM_CAP_NR_VCPUS to both KVM_CAP_MAX_VCPUS
and num_online_cpus(). Most architectures were only using one of the two.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGV/PAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMrogf/eAyilGRQL7lLETn3DTVlgLVv82+z
giX11HlUhUmATHIDluj/wVQUjVcY6AO4SnvFaudX7B+mibndkw4L19IubP/koQZu
xnKSJTn+mVANdzz3UdsHl0ujbPdQJaFCIPW6iewbn2GRRZMwA5F3vMK/H09XRApL
I7kq8CPA6sC0I3TPzPN3ROxigexzYunZmGQ4qQe0GUdtxHrJOYQN++ddmWbQoEIC
gdFTyF7CUQ+lmJe0b/Y88yhISFAJCEBuKFlg9tOTuxSfwvPX6lUu+pi+utEx9M+O
ckTSQli/apZ4RVcSzxMIwX/BciYqhqOz5uMG+w4DRlJixtGSHtjiEVxGxw==
=Iij4
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Selftest changes:
- Cleanups for the perf test infrastructure and mapping hugepages
- Avoid contention on mmap_sem when the guests start to run
- Add event channel upcall support to xen_shinfo_test
x86 changes:
- Fixes for Xen emulation
- Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache
- Fixes for migration of 32-bit nested guests on 64-bit hypervisor
- Compilation fixes
- More SEV cleanups
Generic:
- Cap the return value of KVM_CAP_NR_VCPUS to both KVM_CAP_MAX_VCPUS
and num_online_cpus(). Most architectures were only using one of
the two"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: s390: Cap KVM_CAP_NR_VCPUS by num_online_cpus()
KVM: RISC-V: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: PPC: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: MIPS: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: arm64: Cap KVM_CAP_NR_VCPUS by kvm_arm_default_max_vcpus()
KVM: x86: Assume a 64-bit hypercall for guests with protected state
selftests: KVM: Add /x86_64/sev_migrate_tests to .gitignore
riscv: kvm: fix non-kernel-doc comment block
KVM: SEV: Fix typo in and tweak name of cmd_allowed_from_miror()
KVM: SEV: Drop a redundant setting of sev->asid during initialization
KVM: SEV: WARN if SEV-ES is marked active but SEV is not
KVM: SEV: Set sev_info.active after initial checks in sev_guest_init()
KVM: SEV: Disallow COPY_ENC_CONTEXT_FROM if target has created vCPUs
KVM: Kill kvm_map_gfn() / kvm_unmap_gfn() and gfn_to_pfn_cache
KVM: nVMX: Use a gfn_to_hva_cache for vmptrld
KVM: nVMX: Use kvm_read_guest_offset_cached() for nested VMCS check
KVM: x86/xen: Use sizeof_field() instead of open-coding it
KVM: nVMX: Use kvm_{read,write}_guest_cached() for shadow_vmcs12
KVM: x86/xen: Fix get_attr of KVM_XEN_ATTR_TYPE_SHARED_INFO
...
kexec_file_add_ipl_report ignores that ipl_report_finish may fail and
can return an error pointer instead of a valid pointer.
Fix this and simplify by returning NULL in case of an error and let
the only caller handle this case.
Fixes: 99feaa717e ("s390/kexec_file: Create ipl report and pass to next kernel")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This commit fixes a bug introduced by commit e9e7870f90 ("s390/dump:
introduce boot data 'oldmem_data'").
OLDMEM_BASE was mistakenly replaced by oldmem_data.size instead of
oldmem_data.start.
This bug caused the following error during kdump:
kdump.sh[878]: No program header covering vaddr 0x3434f5245found kexec bug?
Fixes: e9e7870f90 ("s390/dump: introduce boot data 'oldmem_data'")
Cc: stable@vger.kernel.org # 5.15+
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
KVM_CAP_NR_VCPUS is a legacy advisory value which on other architectures
return num_online_cpus() caped by KVM_CAP_NR_VCPUS or something else
(ppc and arm64 are special cases). On s390, KVM_CAP_NR_VCPUS returns
the same as KVM_CAP_MAX_VCPUS and this may turn out to be a bad
'advice'. Switch s390 to returning caped num_online_cpus() too.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-Id: <20211116163443.88707-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the current code, the actual max tail call count is 33 which is greater
than MAX_TAIL_CALL_CNT (defined as 32). The actual limit is not consistent
with the meaning of MAX_TAIL_CALL_CNT and thus confusing at first glance.
We can see the historical evolution from commit 04fd61ab36 ("bpf: allow
bpf programs to tail-call other bpf programs") and commit f9dabe016b
("bpf: Undo off-by-one in interpreter tail call count limit"). In order
to avoid changing existing behavior, the actual limit is 33 now, this is
reasonable.
After commit 874be05f52 ("bpf, tests: Add tail call test suite"), we can
see there exists failed testcase.
On all archs when CONFIG_BPF_JIT_ALWAYS_ON is not set:
# echo 0 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf
# dmesg | grep -w FAIL
Tail call error path, max count reached jited:0 ret 34 != 33 FAIL
On some archs:
# echo 1 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf
# dmesg | grep -w FAIL
Tail call error path, max count reached jited:1 ret 34 != 33 FAIL
Although the above failed testcase has been fixed in commit 18935a72eb
("bpf/tests: Fix error in tail call limit tests"), it would still be good
to change the value of MAX_TAIL_CALL_CNT from 32 to 33 to make the code
more readable.
The 32-bit x86 JIT was using a limit of 32, just fix the wrong comments and
limit to 33 tail calls as the constant MAX_TAIL_CALL_CNT updated. For the
mips64 JIT, use "ori" instead of "addiu" as suggested by Johan Almbladh.
For the riscv JIT, use RV_REG_TCC directly to save one register move as
suggested by Björn Töpel. For the other implementations, no function changes,
it does not change the current limit 33, the new value of MAX_TAIL_CALL_CNT
can reflect the actual max tail call count, the related tail call testcases
in test_bpf module and selftests can work well for the interpreter and the
JIT.
Here are the test results on x86_64:
# uname -m
x86_64
# echo 0 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf test_suite=test_tail_calls
# dmesg | tail -1
test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [0/8 JIT'ed]
# rmmod test_bpf
# echo 1 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf test_suite=test_tail_calls
# dmesg | tail -1
test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [8/8 JIT'ed]
# rmmod test_bpf
# ./test_progs -t tailcalls
#142 tailcalls:OK
Summary: 1/11 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/1636075800-3264-1-git-send-email-yangtiezhu@loongson.cn
When CONFIG_VMAP_STACK is disabled, the user can enable CONFIG_STACK_CHECK,
which adds a stack overflow check to each C function in the kernel. This is
also done for functions in the vdso page. These functions are run in user
context and user stack sizes are usually different to what the kernel uses.
This might trigger the stack check although the stack size is valid.
Therefore filter the -mstack-guard and -mstack-size flags when compiling
vdso C files.
Cc: stable@kernel.org # 5.10+
Fixes: 4bff8cb545 ("s390: convert to GENERIC_VDSO")
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The -nostdlib option requests the compiler to not use the standard
system startup files or libraries when linking. It is effective only
when $(CC) is used as a linker driver.
Since commit 2b2a25845d ("s390/vdso: Use $(LD) instead of $(CC) to
link vDSO"), $(LD) is directly used, hence -nostdlib is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20211107162111.323701-1-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Initial KASAN shadow memory range was picked to preserve original kernel
modules area position. With protected execution support, which might
impose addressing limitation on vmalloc area and hence affect modules
area position, current fixed KASAN shadow memory range is only making
kernel memory layout setup more complex. So move it to the very end of
available virtual space and simplify calculations.
At the same time return to previous kernel address space split. In
particular commit 0c4f2623b9 ("s390: setup kernel memory layout
early") introduced precise identity map size calculation and keeping
vmemmap left most starting from a fresh region table entry. This didn't
take into account additional mapping region requirement for potential
DCSS mapping above available physical memory. So go back to virtual
space split between 1:1 mapping & vmemmap array once vmalloc area size
is subtracted.
Cc: stable@vger.kernel.org
Fixes: 0c4f2623b9 ("s390: setup kernel memory layout early")
Reported-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
- Avoid using ULONG_MAX in memblock_remove, it has no functional change
but makes memblock_dbg output a range which makes sense.
- Actually finish memblock memory setup before doing amode31/cr/uv
setup.
- Move memblock_dump_all() debug output after memblock memory setup is
complete. This gives us final "memory" regions if they were trimmed
due to addressing limits and still "physmem" regions as original info
which came from mem_detect.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
There is a difference in how architectures treat "mem=" option. For some
that is an amount of online memory, for s390 and x86 this is the limiting
max address. Some memblock api like memblock_enforce_memory_limit()
take limit argument and explicitly treat it as the size of online memory,
and use __find_max_addr to convert it to an actual max address. Current
s390 usage:
memblock_enforce_memory_limit(memblock_end_of_DRAM());
yields different results depending on presence of memory holes (offline
memory blocks in between online memory). If there are no memory holes
limit == max_addr in memblock_enforce_memory_limit() and it does trim
online memory and reserved memory regions. With memory holes present it
actually does nothing.
Since we already use memblock_remove() explicitly to trim online memory
regions to potential limit (think mem=, kdump, addressing limits, etc.)
drop the usage of memblock_enforce_memory_limit() altogether. Trimming
reserved regions should not be required, since we now use
memblock_set_current_limit() to limit allocations and any explicit memory
reservations above the limit is an actual problem we should not hide.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Such reserved memory region, if not cleaned up later causes problems when
memblock_free_all() is called to release free pages to the buddy allocator
and those reserved regions are carried over to reserve_bootmem_region()
which marks the pages as PageReserved.
Instead use memblock_set_current_limit() to make sure memblock allocations
do not go over identity mapping (which could happen when "mem=" option
is used or during kdump).
Cc: stable@vger.kernel.org
Fixes: 73045a08cf ("s390: unify identity mapping limits handling")
Reported-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
- Add PCI automatic error recovery.
- Fix tape driver timer initialization broken during timers api cleanup.
- Fix bogus CPU measurement counters values on CPUs offlining.
- Check the validity of subchanel before reading other fields in
the schib in cio code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmGPwDMACgkQjYWKoQLX
FBgCoQf/VBel0vDex9NNVo59OmGTNh9NPPT2cUU8vYEmwHfaBeInZVEx5WOxXijl
8MIbEgi6Wt3EwnIghjouC50nk8jCiNOJ8Z/wG+01zZpVpLk2GvKGjxoYxKg+5E6T
sOSr7TMeKOtOp23xKAXGVIzzkrDTSyr3qruTKg/m6TFhQ0XSm/ld2k6tR5AARbuB
UtsxBOtPWyHm1xPyuhjr+c6riK2vGQwJwYya4vGtIW8ix9uZoPabdqqzWsD3meBc
B6fe96YQGxA8Tt80FtyJ6pHEhNDr8CE656aJZNJCnd7q1RmLWC1R/aUme+9wqQtO
i9YmMvc+uzgQonpo+YgWqu9fIQqcXA==
=OjW1
-----END PGP SIGNATURE-----
Merge tag 's390-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Add PCI automatic error recovery.
- Fix tape driver timer initialization broken during timers api
cleanup.
- Fix bogus CPU measurement counters values on CPUs offlining.
- Check the validity of subchanel before reading other fields in the
schib in cio code.
* tag 's390-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: check the subchannel validity for dev_busid
s390/cpumf: cpum_cf PMU displays invalid value after hotplug remove
s390/tape: fix timer initialization in tape_std_assign()
s390/pci: implement minimal PCI error recovery
PCI: Export pci_dev_lock()
s390/pci: implement reset_slot for hotplug slot
s390/pci: refresh function handle in iomap
Pull exit cleanups from Eric Biederman:
"While looking at some issues related to the exit path in the kernel I
found several instances where the code is not using the existing
abstractions properly.
This set of changes introduces force_fatal_sig a way of sending a
signal and not allowing it to be caught, and corrects the misuse of
the existing abstractions that I found.
A lot of the misuse of the existing abstractions are silly things such
as doing something after calling a no return function, rolling BUG by
hand, doing more work than necessary to terminate a kernel thread, or
calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL).
In the review a deficiency in force_fatal_sig and force_sig_seccomp
where ptrace or sigaction could prevent the delivery of the signal was
found. I have added a change that adds SA_IMMUTABLE to change that
makes it impossible to interrupt the delivery of those signals, and
allows backporting to fix force_sig_seccomp
And Arnd found an issue where a function passed to kthread_run had the
wrong prototype, and after my cleanup was failing to build."
* 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits)
soc: ti: fix wkup_m3_rproc_boot_thread return type
signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed
signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)
exit/r8188eu: Replace the macro thread_exit with a simple return 0
exit/rtl8712: Replace the macro thread_exit with a simple return 0
exit/rtl8723bs: Replace the macro thread_exit with a simple return 0
signal/x86: In emulate_vsyscall force a signal instead of calling do_exit
signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig
signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails
exit/syscall_user_dispatch: Send ordinary signals on failure
signal: Implement force_fatal_sig
exit/kthread: Have kernel threads return instead of calling do_exit
signal/s390: Use force_sigsegv in default_trap_handler
signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.
signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON
signal/sparc: In setup_tsb_params convert open coded BUG into BUG
signal/powerpc: On swapcontext failure force SIGSEGV
signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL)
signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT
signal/sparc32: Remove unreachable do_exit in do_sparc_fault
...
This is a single cleanup from Peter Collingbourne, removing
some dead code.
-----BEGIN PGP SIGNATURE-----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=8EFP
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanup from Arnd Bergmann:
"This is a single cleanup from Peter Collingbourne, removing some dead
code"
* tag 'asm-generic-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: remove unused function syscall_set_arguments()
Merge more updates from Andrew Morton:
"87 patches.
Subsystems affected by this patch series: mm (pagecache and hugetlb),
procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs,
init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork,
sysvfs, kcov, gdb, resource, selftests, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits)
ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL
ipc: check checkpoint_restore_ns_capable() to modify C/R proc files
selftests/kselftest/runner/run_one(): allow running non-executable files
virtio-mem: disallow mapping virtio-mem memory via /dev/mem
kernel/resource: disallow access to exclusive system RAM regions
kernel/resource: clean up and optimize iomem_is_exclusive()
scripts/gdb: handle split debug for vmlinux
kcov: replace local_irq_save() with a local_lock_t
kcov: avoid enable+disable interrupts if !in_task()
kcov: allocate per-CPU memory on the relevant node
Documentation/kcov: define `ip' in the example
Documentation/kcov: include types.h in the example
sysv: use BUILD_BUG_ON instead of runtime check
kernel/fork.c: unshare(): use swap() to make code cleaner
seq_file: fix passing wrong private data
seq_file: move seq_escape() to a header
signal: remove duplicate include in signal.h
crash_dump: remove duplicate include in crash_dump.h
crash_dump: fix boolreturn.cocci warning
hfs/hfsplus: use WARN_ON for sanity check
...
When kernel.h is used in the headers it adds a lot into dependency hell,
especially when there are circular dependencies are involved.
Replace kernel.h inclusion with the list of what is really being used.
[akpm@linux-foundation.org: cxd2880_common.h needs bits.h for GENMASK()]
[andriy.shevchenko@linux.intel.com: delay.h: fix for removed kernel.h]
Link: https://lkml.kernel.org/r/20211028170143.56523-1-andriy.shevchenko@linux.intel.com
[akpm@linux-foundation.org: include/linux/fwnode.h needs bits.h for BIT()]
Link: https://lkml.kernel.org/r/20211027150324.79827-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Remove the global -isystem compiler flag, which was made possible by
the introduction of <linux/stdarg.h>
- Improve the Kconfig help to print the location in the top menu level
- Fix "FORCE prerequisite is missing" build warning for sparc
- Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which generate
a zstd-compressed tarball
- Prevent gen_init_cpio tool from generating a corrupted cpio when
KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=ATFN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove the global -isystem compiler flag, which was made possible by
the introduction of <linux/stdarg.h>
- Improve the Kconfig help to print the location in the top menu level
- Fix "FORCE prerequisite is missing" build warning for sparc
- Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which
generate a zstd-compressed tarball
- Prevent gen_init_cpio tool from generating a corrupted cpio when
KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later
- Misc cleanups
* tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
kbuild: use more subdir- for visiting subdirectories while cleaning
sh: remove meaningless archclean line
initramfs: Check timestamp to prevent broken cpio archive
kbuild: split DEBUG_CFLAGS out to scripts/Makefile.debug
gen_init_cpio: add static const qualifiers
kbuild: Add make tarzst-pkg build option
scripts: update the comments of kallsyms support
sparc: Add missing "FORCE" target when using if_changed
kconfig: refactor conf_touch_dep()
kconfig: refactor conf_write_dep()
kconfig: refactor conf_write_autoconf()
kconfig: add conf_get_autoheader_name()
kconfig: move sym_escape_string_value() to confdata.c
kconfig: refactor listnewconfig code
kconfig: refactor conf_write_symbol()
kconfig: refactor conf_write_heading()
kconfig: remove 'const' from the return type of sym_escape_string_value()
kconfig: rename a variable in the lexer to a clearer name
kconfig: narrow the scope of variables in the lexer
kconfig: Create links to main menu items in search
...
When a CPU is hotplugged while the perf stat -e cycles command is
running, a wrong (very large) value is displayed immediately after the
CPU removal:
Check the values, shouldn't be too high as in
time counts unit events
1.001101919 29261846 cycles
2.002454499 17523405 cycles
3.003659292 24361161 cycles
4.004816983 18446744073638406144 cycles
5.005671647 <not counted> cycles
...
The CPU hotplug off took place after 3 seconds.
The issue is the read of the event count value after 4 seconds when
the CPU is not available and the read of the counter returns an
error. This is treated as a counter value of zero. This results
in a very large value (0 - previous_value).
Fix this by detecting the hotplugged off CPU and report 0 instead
of a very large number.
Cc: stable@vger.kernel.org
Fixes: a029a4eab3 ("s390/cpumf: Allow concurrent access for CPU Measurement Counter Facility")
Reported-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When the platform detects an error on a PCI function or a service action
has been performed it is put in the error state and an error event
notification is provided to the OS.
Currently we treat all error event notifications the same and simply set
pdev->error_state = pci_channel_io_perm_failure requiring user
intervention such as use of the recover attribute to get the device
usable again. Despite requiring a manual step this also has the
disadvantage that the device is completely torn down and recreated
resulting in higher level devices such as a block or network device
being recreated. In case of a block device this also means that it may
need to be removed and added to a software raid even if that could
otherwise survive with a temporary degradation.
This is of course not ideal more so since an error notification with PEC
0x3A indicates that the platform already performed error recovery
successfully or that the error state was caused by a service action that
is now finished.
At least in this case we can assume that the error state can be reset
and the function made usable again. So as not to have the disadvantage
of a full tear down and recreation we need to coordinate this recovery
with the driver. Thankfully there is already a well defined recovery
flow for this described in Documentation/PCI/pci-error-recovery.rst.
The implementation of this is somewhat straight forward and simplified
by the fact that our recovery flow is defined per PCI function. As
a reset we use the newly introduced zpci_hot_reset_device() which also
takes the PCI function out of the error state.
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This is done by adding a zpci_hot_reset_device() call which does a low
level reset of the PCI function without changing its higher level
function state. This way it can be used while the zPCI function is bound
to a driver and with DMA tables being controlled either through the
IOMMU or DMA APIs which is prohibited when using zpci_disable_device()
as that drop existing DMA translations.
As this reset, unlike a normal FLR, also calls zpci_clear_irq() we need
to implement arch_restore_msi_irqs() and make sure we re-enable IRQs for
the PCI function if they were previously disabled.
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The function handle of a PCI function is updated when disabling or
enabling it as well as when the function's availability changes or it
enters the error state.
Until now this only occurred either while there is no struct pci_dev
associated with the function yet or the function became unavailable.
This meant that leaving a stale function handle in the iomap either
didn't happen because there was no iomap yet or it lead to errors on PCI
access but so would the correct disabled function handle.
In the future a CLP Set PCI Function Disable/Enable cycle during PCI
device recovery may be done while the device is bound to a driver. In
this case we must update the iomap associated with the now-stale
function handle to ensure that the resulting zPCI instruction references
an accurate function handle.
Since the function handle is accessed by the PCI accessor helpers
without locking use READ_ONCE()/WRITE_ONCE() to mark this access and
prevent compiler optimizations that would move the load/store.
With that infrastructure in place let's also properly update the
function handle in the existing cases. This makes sure that in the
future debugging of a zPCI function access through the handle will
show an up to date handle reducing the chance of confusion. Also it
makes sure we have one single place where a zPCI function handle is
updated after initialization.
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
- Add support for ftrace with direct call and ftrace direct call samples.
- Add support for kernel command lines longer than current 896 bytes and
make its length configurable.
- Add support for BEAR enhancement facility to improve last breaking
event instruction tracking.
- Add kprobes sanity checks and testcases to prevent kprobe in the mid
of an instruction.
- Allow concurrent access to /dev/hwc for the CPUMF users.
- Various ftrace / jump label improvements.
- Convert unwinder tests to KUnit.
- Add s390_iommu_aperture kernel parameter to tweak the limits on
concurrently usable DMA mappings.
- Add ap.useirq AP module option which can be used to disable interrupt
use.
- Add add_disk() error handling support to block device drivers.
- Drop arch specific and use generic implementation of strlcpy and strrchr.
- Several __pa/__va usages fixes.
- Various cio, crypto, pci, kernel doc and other small fixes and
improvements all over the code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmGFW6EACgkQjYWKoQLX
FBg20Qf/UbohgnKnE6vxbbH3sNTlI2dk3Cw4z3IobcsZgqXAu6AFLgLQGLk/X07F
DIyUdrgSgCzLIEKLqrLrFXIOMIK44zAGaurIltNt7IrnWWlA+/YVD+YeL2gHwccq
wT7KXRcrVMZQ1z18djJQ45DpPUC8ErBdL6+P+ftHck90YGFZsfMA5S7jf8X1h08U
IlqdPTmY8t4unKHWVpHbxx9b+xrUuV6KTEXADsllpMV2jQoTLdDECd3vmefYR6tR
3lssgop1m/RzH5OCqvia5Sy2D5fOQObNWDMakwOkVMxOD43lmGCTHstzS2Uo2OFE
QcY79lfZ5NrzKnenUdE5Fd0XJ9kSwQ==
=k0Ab
-----END PGP SIGNATURE-----
Merge tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add support for ftrace with direct call and ftrace direct call
samples.
- Add support for kernel command lines longer than current 896 bytes
and make its length configurable.
- Add support for BEAR enhancement facility to improve last breaking
event instruction tracking.
- Add kprobes sanity checks and testcases to prevent kprobe in the mid
of an instruction.
- Allow concurrent access to /dev/hwc for the CPUMF users.
- Various ftrace / jump label improvements.
- Convert unwinder tests to KUnit.
- Add s390_iommu_aperture kernel parameter to tweak the limits on
concurrently usable DMA mappings.
- Add ap.useirq AP module option which can be used to disable interrupt
use.
- Add add_disk() error handling support to block device drivers.
- Drop arch specific and use generic implementation of strlcpy and
strrchr.
- Several __pa/__va usages fixes.
- Various cio, crypto, pci, kernel doc and other small fixes and
improvements all over the code.
[ Merge fixup as per https://lore.kernel.org/all/YXAqZ%2FEszRisunQw@osiris/ ]
* tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (63 commits)
s390: make command line configurable
s390: support command lines longer than 896 bytes
s390/kexec_file: move kernel image size check
s390/pci: add s390_iommu_aperture kernel parameter
s390/spinlock: remove incorrect kernel doc indicator
s390/string: use generic strlcpy
s390/string: use generic strrchr
s390/ap: function rework based on compiler warning
s390/cio: make ccw_device_dma_* more robust
s390/vfio-ap: s390/crypto: fix all kernel-doc warnings
s390/hmcdrv: fix kernel doc comments
s390/ap: new module option ap.useirq
s390/cpumf: Allow multiple processes to access /dev/hwc
s390/bitops: return true/false (not 1/0) from bool functions
s390: add support for BEAR enhancement facility
s390: introduce nospec_uses_trampoline()
s390: rename last_break to pgm_last_break
s390/ptrace: add last_break member to pt_regs
s390/sclp: sort out physical vs virtual pointers usage
s390/setup: convert start and end initrd pointers to virtual
...
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmGFXBkUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vx6Tg/7BsGWm8f+uw/mr9lLm47q2mc4XyoO
7bR9KDp5NM84W/8ZOU7dqqqsnY0ddrSOLBRyhJJYMW3SwJd1y1ajTBsL1Ujqv+eN
z+JUFmhq4Laqm4k6Spc9CEJE+Ol5P6gGUtxLYo6PM2R0VxnSs/rDxctT5i7YOpCi
COJ+NVT/mc/by2loz1kLTSR9GgtBBgd+Y8UA33GFbHKssROw02L0OI3wffp81Oba
EhMGPoD+0FndAniDw+vaOSoO+YaBuTfbM92T/O00mND69Fj1PWgmNWZz7gAVgsXb
3RrNENUFxgw6CDt7LZWB8OyT04iXe0R2kJs+PA9gigFCGbypwbd/Nbz5M7e9HUTR
ray+1EpZib6+nIksQBL2mX8nmtyHMcLiM57TOEhq0+ECDO640MiRm8t0FIG/1E8v
3ZYd9w20o/NxlFNXHxxpZ3D/osGH5ocyF5c5m1rfB4RGRwztZGL172LWCB0Ezz9r
eHB8sWxylxuhrH+hp2BzQjyddg7rbF+RA4AVfcQSxUpyV01hoRocKqknoDATVeLH
664nJIINFxKJFwfuL3E6OhrInNe1LnAhCZsHHqbS+NNQFgvPRznbixBeLkI9dMf5
Yf6vpsWO7ur8lHHbRndZubVu8nxklXTU7B/w+C11sq6k9LLRJSHzanr3Fn9WA80x
sznCxwUvbTCu1r0=
=nsMh
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Conserve IRQs by setting up portdrv IRQs only when there are users
(Jan Kiszka)
- Rework and simplify _OSC negotiation for control of PCIe features
(Joerg Roedel)
- Remove struct pci_dev.driver pointer since it's redundant with the
struct device.driver pointer (Uwe Kleine-König)
Resource management:
- Coalesce contiguous host bridge apertures from _CRS to accommodate
BARs that cover more than one aperture (Kai-Heng Feng)
Sysfs:
- Check CAP_SYS_ADMIN before parsing user input (Krzysztof
Wilczyński)
- Return -EINVAL consistently from "store" functions (Krzysztof
Wilczyński)
- Use sysfs_emit() in endpoint "show" functions to avoid buffer
overruns (Kunihiko Hayashi)
PCIe native device hotplug:
- Ignore Link Down/Up caused by resets during error recovery so
endpoint drivers can remain bound to the device (Lukas Wunner)
Virtualization:
- Avoid bus resets on Atheros QCA6174, where they hang the device
(Ingmar Klein)
- Work around Pericom PI7C9X2G switch packet drop erratum by using
store and forward mode instead of cut-through (Nathan Rossi)
- Avoid trying to enable AtomicOps on VFs; the PF setting applies to
all VFs (Selvin Xavier)
MSI:
- Document that /sys/bus/pci/devices/.../irq contains the legacy INTx
interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry
Song)
VPD:
- Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere
in the possible VPD space; use these to simplify the cxgb3 driver
(Heiner Kallweit)
Peer-to-peer DMA:
- Add (not subtract) the bus offset when calculating DMA address
(Wang Lu)
ASPM:
- Re-enable LTR at Downstream Ports so they don't report Unsupported
Requests when reset or hot-added devices send LTR messages
(Mingchuang Qiao)
Apple PCIe controller driver:
- Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc
Zyngier)
Cadence PCIe controller driver:
- Return success when probe succeeds instead of falling into error
path (Li Chen)
HiSilicon Kirin PCIe controller driver:
- Reorganize PHY logic and add support for external PHY drivers
(Mauro Carvalho Chehab)
- Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro
Carvalho Chehab)
- Add Kirin 970 support (Mauro Carvalho Chehab)
- Make driver removable (Mauro Carvalho Chehab)
Intel VMD host bridge driver:
- If IOMMU supports interrupt remapping, leave VMD MSI-X remapping
enabled (Adrian Huang)
- Number each controller so we can tell them apart in
/proc/interrupts (Chunguang Xu)
- Avoid building on UML because VMD depends on x86 bare metal APIs
(Johannes Berg)
Marvell Aardvark PCIe controller driver:
- Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár)
- Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár)
- Downgrade PIO Response Status messages to debug level (Marek Behún)
- Preserve CRS SV (Config Request Retry Software Visibility) bit in
emulated Root Control register (Pali Rohár)
- Fix issue in configuring reference clock (Pali Rohár)
- Don't clear status bits for masked interrupts (Pali Rohár)
- Don't mask unused interrupts (Pali Rohár)
- Avoid code repetition in advk_pcie_rd_conf() (Marek Behún)
- Retry config accesses on CRS response (Pali Rohár)
- Simplify emulated Root Capabilities initialization (Pali Rohár)
- Fix several link training issues (Pali Rohár)
- Fix link-up checking via LTSSM (Pali Rohár)
- Fix reporting of Data Link Layer Link Active (Pali Rohár)
- Fix emulation of W1C bits (Marek Behún)
- Fix MSI domain .alloc() method to return zero on success (Marek
Behún)
- Read entire 16-bit MSI vector in MSI handler, not just low 8 bits
(Marek Behún)
- Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits
at startup; PCI core will set those as necessary (Pali Rohár)
- When operating as a Root Port, set class code to "PCI Bridge"
instead of the default "Mass Storage Controller" (Pali Rohár)
- Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't
implement this per spec (Pali Rohár)
- Add emulation of option ROM BAR since aardvark doesn't implement
this per spec (Pali Rohár)
MediaTek MT7621 PCIe controller driver:
- Add MediaTek MT7621 PCIe host controller driver and DT binding
(Sergio Paracuellos)
Qualcomm PCIe controller driver:
- Add SC8180x compatible string (Bjorn Andersson)
- Add endpoint controller driver and DT binding (Manivannan
Sadhasivam)
- Restructure to use of_device_get_match_data() (Prasad Malisetty)
- Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty)
Renesas R-Car PCIe controller driver:
- Remove unnecessary includes (Geert Uytterhoeven)
Rockchip DesignWare PCIe controller driver:
- Add DT binding (Simon Xue)
Socionext UniPhier Pro5 controller driver:
- Serialize INTx masking/unmasking (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Run dwc .host_init() method before registering MSI interrupt
handler so we can deal with pending interrupts left by bootloader
(Bjorn Andersson)
- Clean up Kconfig dependencies (Andy Shevchenko)
- Export symbols to allow more modular drivers (Luca Ceresoli)
TI DRA7xx PCIe controller driver:
- Allow host and endpoint drivers to be modules (Luca Ceresoli)
- Enable external clock if present (Luca Ceresoli)
TI J721E PCIe driver:
- Disable PHY when probe fails after initializing it (Christophe
JAILLET)
MicroSemi Switchtec management driver:
- Return error to application when command execution fails because an
out-of-band reset has cleared the device BARs, Memory Space Enable,
etc (Kelvin Cao)
- Fix MRPC error status handling issue (Kelvin Cao)
- Mask out other bits when reading of management VEP instance ID
(Kelvin Cao)
- Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions
(Kelvin Cao)
- Add check of event support (Logan Gunthorpe)
Miscellaneous:
- Remove unused pci_pool wrappers, which have been replaced by
dma_pool (Cai Huoqing)
- Use 'unsigned int' instead of bare 'unsigned' (Krzysztof
Wilczyński)
- Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof
Wilczyński)
- Fix some sscanf(), sprintf() format mismatches (Krzysztof
Wilczyński)
- Update PCI subsystem information in MAINTAINERS (Krzysztof
Wilczyński)
- Correct some misspellings (Krzysztof Wilczyński)"
* tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits)
PCI: Add ACS quirk for Pericom PI7C9X2G switches
PCI: apple: Configure RID to SID mapper on device addition
iommu/dart: Exclude MSI doorbell from PCIe device IOVA range
PCI: apple: Implement MSI support
PCI: apple: Add INTx and per-port interrupt support
PCI: kirin: Allow removing the driver
PCI: kirin: De-init the dwc driver
PCI: kirin: Disable clkreq during poweroff sequence
PCI: kirin: Move the power-off code to a common routine
PCI: kirin: Add power_off support for Kirin 960 PHY
PCI: kirin: Allow building it as a module
PCI: kirin: Add MODULE_* macros
PCI: kirin: Add Kirin 970 compatible
PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge
PCI: apple: Set up reference clocks when probing
PCI: apple: Add initial hardware bring-up
PCI: of: Allow matching of an interrupt-map local to a PCI device
of/irq: Allow matching of an interrupt-map local to an interrupt controller
irqdomain: Make of_phandle_args_to_fwspec() generally available
PCI: Do not enable AtomicOps on VFs
...
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
We want to specify flags when hotplugging memory. Let's prepare to pass
flags to memblock_add_node() by adjusting all existing users.
Note that when hotplugging memory the system is already up and running
and we might have concurrent memblock users: for example, while we're
hotplugging memory, kexec_file code might search for suitable memory
regions to place kexec images. It's important to add the memory
directly to memblock via a single call with the right flags, instead of
adding the memory first and apply flags later: otherwise, concurrent
memblock users might temporarily stumble over memblocks with wrong
flags, which will be important in a follow-up patch that introduces a
new flag to properly handle add_memory_driver_managed().
Link: https://lkml.kernel.org/r/20211004093605.5830-4-david@redhat.com
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Shahab Vahedi <shahab@synopsys.com> [arch/arc]
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jianyong Wu <Jianyong.Wu@arm.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().
The callers are updated with the below semantic patch:
@@
expression addr;
expression size;
@@
- memblock_free(addr, size);
+ memblock_phys_free(addr, size);
Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
memblock_free_early_nid() is unused and memblock_free_early() is an
alias for memblock_free().
Replace calls to memblock_free_early() with calls to memblock_free() and
remove memblock_free_early() and memblock_free_early_nid().
Link: https://lkml.kernel.org/r/20210930185031.18648-4-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The generic version of arch_is_kernel_initmem_freed() now does the same
as s390 version.
Remove the s390 version.
Link: https://lkml.kernel.org/r/b6feb5dfe611a322de482762fc2df3a9eece70c7.1633001016.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* More progress on the protected VM front, now with the full
fixed feature set as well as the limitation of some hypercalls
after initialisation.
* Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
* Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
* More memcg accounting of the memory allocated on behalf of a guest
* Timer and vgic selftests
* Workarounds for the Apple M1 broken vgic implementation
* KConfig cleanups
* New kvmarm.mode=none option, for those who really dislike us
RISC-V:
* New KVM port.
x86:
* New API to control TSC offset from userspace
* TSC scaling for nested hypervisors on SVM
* Switch masterclock protection from raw_spin_lock to seqcount
* Clean up function prototypes in the page fault code and avoid
repeated memslot lookups
* Convey the exit reason to userspace on emulation failure
* Configure time between NX page recovery iterations
* Expose Predictive Store Forwarding Disable CPUID leaf
* Allocate page tracking data structures lazily (if the i915
KVM-GT functionality is not compiled in)
* Cleanups, fixes and optimizations for the shadow MMU code
s390:
* SIGP Fixes
* initial preparations for lazy destroy of secure VMs
* storage key improvements/fixes
* Log the guest CPNC
Starting from this release, KVM-PPC patches will come from
Michael Ellerman's PPC tree.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGBOiEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNowwf/axlx3g9sgCwQHr12/6UF/7hL/RwP
9z+pGiUzjl2YQE+RjSvLqyd6zXh+h4dOdOKbZDLSkSTbcral/8U70ojKnQsXM0XM
1LoymxBTJqkgQBLm9LjYreEbzrPV4irk4ygEmuk3CPOHZu8xX1ei6c5LdandtM/n
XVUkXsQY+STkmnGv4P3GcPoDththCr0tBTWrFWtxa0w9hYOxx0ay1AZFlgM4FFX0
QFuRc8VBLoDJpIUjbkhsIRIbrlHc/YDGjuYnAU7lV/CIME8vf2BW6uBwIZJdYcDj
0ejozLjodEnuKXQGnc8sXFioLX2gbMyQJEvwCgRvUu/EU7ncFm1lfs7THQ==
=UxKM
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- More progress on the protected VM front, now with the full fixed
feature set as well as the limitation of some hypercalls after
initialisation.
- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
- Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
- More memcg accounting of the memory allocated on behalf of a guest
- Timer and vgic selftests
- Workarounds for the Apple M1 broken vgic implementation
- KConfig cleanups
- New kvmarm.mode=none option, for those who really dislike us
RISC-V:
- New KVM port.
x86:
- New API to control TSC offset from userspace
- TSC scaling for nested hypervisors on SVM
- Switch masterclock protection from raw_spin_lock to seqcount
- Clean up function prototypes in the page fault code and avoid
repeated memslot lookups
- Convey the exit reason to userspace on emulation failure
- Configure time between NX page recovery iterations
- Expose Predictive Store Forwarding Disable CPUID leaf
- Allocate page tracking data structures lazily (if the i915 KVM-GT
functionality is not compiled in)
- Cleanups, fixes and optimizations for the shadow MMU code
s390:
- SIGP Fixes
- initial preparations for lazy destroy of secure VMs
- storage key improvements/fixes
- Log the guest CPNC
Starting from this release, KVM-PPC patches will come from Michael
Ellerman's PPC tree"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
RISC-V: KVM: fix boolreturn.cocci warnings
RISC-V: KVM: remove unneeded semicolon
RISC-V: KVM: Fix GPA passed to __kvm_riscv_hfence_gvma_xyz() functions
RISC-V: KVM: Factor-out FP virtualization into separate sources
KVM: s390: add debug statement for diag 318 CPNC data
KVM: s390: pv: properly handle page flags for protected guests
KVM: s390: Fix handle_sske page fault handling
KVM: x86: SGX must obey the KVM_INTERNAL_ERROR_EMULATION protocol
KVM: x86: On emulation failure, convey the exit reason, etc. to userspace
KVM: x86: Get exit_reason as part of kvm_x86_ops.get_exit_info
KVM: x86: Clarify the kvm_run.emulation_failure structure layout
KVM: s390: Add a routine for setting userspace CPU state
KVM: s390: Simplify SIGP Set Arch handling
KVM: s390: pv: avoid stalls when making pages secure
KVM: s390: pv: avoid stalls for kvm_s390_pv_init_vm
KVM: s390: pv: avoid double free of sida page
KVM: s390: pv: add macros for UVC CC values
s390/mm: optimize reset_guest_reference_bit()
s390/mm: optimize set_guest_storage_key()
s390/mm: no need for pte_alloc_map_lock() if we know the pmd is present
...
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space
and avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace
to work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction,
by exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec
offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP
buffer pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x
and Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we
can add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements
to CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=srde
-----END PGP SIGNATURE-----
Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace to
work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction, by
exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP buffer
pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we can
add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements to
CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies"
* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
Revert "net: avoid double accounting for pure zerocopy skbs"
selftests: net: add arp_ndisc_evict_nocarrier
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
net: arp: introduce arp_evict_nocarrier sysctl parameter
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
net: avoid double accounting for pure zerocopy skbs
tcp: rename sk_wmem_free_skb
netdevsim: fix uninit value in nsim_drv_configure_vfs()
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
...
-----BEGIN PGP SIGNATURE-----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=WrEw
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Add some additional audit logging to capture the openat2() syscall
open_how struct info.
Previous variations of the open()/openat() syscalls allowed audit
admins to inspect the syscall args to get the information contained in
the new open_how struct used in openat2()"
* tag 'audit-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: return early if the filter rule has a lower priority
audit: add OPENAT2 record to list "how" info
audit: add support for the openat2 syscall
audit: replace magic audit syscall class numbers with macros
lsm_audit: avoid overloading the "key" audit field
audit: Convert to SPDX identifier
audit: rename struct node to struct audit_node to prevent future name collisions
- kprobes: Restructured stack unwinder to show properly on x86 when a stack
dump happens from a kretprobe callback.
- Fix to bootconfig parsing
- Have tracefs allow owner and group permissions by default (only denying
others). There's been pressure to allow non root to tracefs in a
controlled fashion, and using groups is probably the safest.
- Bootconfig memory managament updates.
- Bootconfig clean up to have the tools directory be less dependent on
changes in the kernel tree.
- Allow perf to be traced by function tracer.
- Rewrite of function graph tracer to be a callback from the function tracer
instead of having its own trampoline (this change will happen on an arch
by arch basis, and currently only x86_64 implements it).
- Allow multiple direct trampolines (bpf hooks to functions) be batched
together in one synchronization.
- Allow histogram triggers to add variables that can perform calculations
against the event's fields.
- Use the linker to determine architecture callbacks from the ftrace
trampoline to allow for proper parameter prototypes and prevent warnings
from the compiler.
- Extend histogram triggers to key off of variables.
- Have trace recursion use bit magic to determine preempt context over if
branches.
- Have trace recursion disable preemption as all use cases do anyway.
- Added testing for verification of tracing utilities.
- Various small clean ups and fixes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYYBdxhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qp1sAQD2oYFwaG3sx872gj/myBcHIBSKdiki
Hry5csd8zYDBpgD+Poylopt5JIbeDuoYw/BedgEXmscZ8Qr7VzjAXdnv/Q4=
=Loz8
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- kprobes: Restructured stack unwinder to show properly on x86 when a
stack dump happens from a kretprobe callback.
- Fix to bootconfig parsing
- Have tracefs allow owner and group permissions by default (only
denying others). There's been pressure to allow non root to tracefs
in a controlled fashion, and using groups is probably the safest.
- Bootconfig memory managament updates.
- Bootconfig clean up to have the tools directory be less dependent on
changes in the kernel tree.
- Allow perf to be traced by function tracer.
- Rewrite of function graph tracer to be a callback from the function
tracer instead of having its own trampoline (this change will happen
on an arch by arch basis, and currently only x86_64 implements it).
- Allow multiple direct trampolines (bpf hooks to functions) be batched
together in one synchronization.
- Allow histogram triggers to add variables that can perform
calculations against the event's fields.
- Use the linker to determine architecture callbacks from the ftrace
trampoline to allow for proper parameter prototypes and prevent
warnings from the compiler.
- Extend histogram triggers to key off of variables.
- Have trace recursion use bit magic to determine preempt context over
if branches.
- Have trace recursion disable preemption as all use cases do anyway.
- Added testing for verification of tracing utilities.
- Various small clean ups and fixes.
* tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (101 commits)
tracing/histogram: Fix semicolon.cocci warnings
tracing/histogram: Fix documentation inline emphasis warning
tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together
tracing: Show size of requested perf buffer
bootconfig: Initialize ret in xbc_parse_tree()
ftrace: do CPU checking after preemption disabled
ftrace: disable preemption when recursion locked
tracing/histogram: Document expression arithmetic and constants
tracing/histogram: Optimize division by a power of 2
tracing/histogram: Covert expr to const if both operands are constants
tracing/histogram: Simplify handling of .sym-offset in expressions
tracing: Fix operator precedence for hist triggers expression
tracing: Add division and multiplication support for hist triggers
tracing: Add support for creating hist trigger variables from literal
selftests/ftrace: Stop tracing while reading the trace file by default
MAINTAINERS: Update KPROBES and TRACING entries
test_kprobes: Move it from kernel/ to lib/
docs, kprobes: Remove invalid URL and add new reference
samples/kretprobes: Fix return value if register_kretprobe() failed
lib/bootconfig: Fix the xbc_get_info kerneldoc
...
The end goal of the current buffer overflow detection work[0] is to gain
full compile-time and run-time coverage of all detectable buffer overflows
seen via array indexing or memcpy(), memmove(), and memset(). The str*()
family of functions already have full coverage.
While much of the work for these changes have been on-going for many
releases (i.e. 0-element and 1-element array replacements, as well as
avoiding false positives and fixing discovered overflows[1]), this series
contains the foundational elements of several related buffer overflow
detection improvements by providing new common helpers and FORTIFY_SOURCE
changes needed to gain the introspection required for compiler visibility
into array sizes. Also included are a handful of already Acked instances
using the helpers (or related clean-ups), with many more waiting at the
ready to be taken via subsystem-specific trees[2]. The new helpers are:
- struct_group() for gaining struct member range introspection.
- memset_after() and memset_startat() for clearing to the end of structures.
- DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in structs.
Also included is the beginning of the refactoring of FORTIFY_SOURCE to
support memcpy() introspection, fix missing and regressed coverage under
GCC, and to prepare to fix the currently broken Clang support. Finishing
this work is part of the larger series[0], but depends on all the false
positives and buffer overflow bug fixes to have landed already and those
that depend on this series to land.
As part of the FORTIFY_SOURCE refactoring, a set of both a compile-time
and run-time tests are added for FORTIFY_SOURCE and the mem*()-family
functions respectively. The compile time tests have found a legitimate
(though corner-case) bug[6] already.
Please note that the appearance of "panic" and "BUG" in the
FORTIFY_SOURCE refactoring are the result of relocating existing code,
and no new use of those code-paths are expected nor desired.
Finally, there are two tree-wide conversions for 0-element arrays and
flexible array unions to gain sane compiler introspection coverage that
result in no known object code differences.
After this series (and the changes that have now landed via netdev
and usb), we are very close to finally being able to build with
-Warray-bounds and -Wzero-length-bounds. However, due corner cases in
GCC[3] and Clang[4], I have not included the last two patches that turn
on these options, as I don't want to introduce any known warnings to
the build. Hopefully these can be solved soon.
[0] https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE
[2] https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/
[3] https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/
[4] https://bugs.llvm.org/show_bug.cgi?id=51682
[5] https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/
[6] https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/
-----BEGIN PGP SIGNATURE-----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=9xbT
-----END PGP SIGNATURE-----
Merge tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull overflow updates from Kees Cook:
"The end goal of the current buffer overflow detection work[0] is to
gain full compile-time and run-time coverage of all detectable buffer
overflows seen via array indexing or memcpy(), memmove(), and
memset(). The str*() family of functions already have full coverage.
While much of the work for these changes have been on-going for many
releases (i.e. 0-element and 1-element array replacements, as well as
avoiding false positives and fixing discovered overflows[1]), this
series contains the foundational elements of several related buffer
overflow detection improvements by providing new common helpers and
FORTIFY_SOURCE changes needed to gain the introspection required for
compiler visibility into array sizes. Also included are a handful of
already Acked instances using the helpers (or related clean-ups), with
many more waiting at the ready to be taken via subsystem-specific
trees[2].
The new helpers are:
- struct_group() for gaining struct member range introspection
- memset_after() and memset_startat() for clearing to the end of
structures
- DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in
structs
Also included is the beginning of the refactoring of FORTIFY_SOURCE to
support memcpy() introspection, fix missing and regressed coverage
under GCC, and to prepare to fix the currently broken Clang support.
Finishing this work is part of the larger series[0], but depends on
all the false positives and buffer overflow bug fixes to have landed
already and those that depend on this series to land.
As part of the FORTIFY_SOURCE refactoring, a set of both a
compile-time and run-time tests are added for FORTIFY_SOURCE and the
mem*()-family functions respectively. The compile time tests have
found a legitimate (though corner-case) bug[6] already.
Please note that the appearance of "panic" and "BUG" in the
FORTIFY_SOURCE refactoring are the result of relocating existing code,
and no new use of those code-paths are expected nor desired.
Finally, there are two tree-wide conversions for 0-element arrays and
flexible array unions to gain sane compiler introspection coverage
that result in no known object code differences.
After this series (and the changes that have now landed via netdev and
usb), we are very close to finally being able to build with
-Warray-bounds and -Wzero-length-bounds.
However, due corner cases in GCC[3] and Clang[4], I have not included
the last two patches that turn on these options, as I don't want to
introduce any known warnings to the build. Hopefully these can be
solved soon"
Link: https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/ [0]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE [1]
Link: https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/ [2]
Link: https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/ [3]
Link: https://bugs.llvm.org/show_bug.cgi?id=51682 [4]
Link: https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/ [5]
Link: https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/ [6]
* tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits)
fortify: strlen: Avoid shadowing previous locals
compiler-gcc.h: Define __SANITIZE_ADDRESS__ under hwaddress sanitizer
treewide: Replace 0-element memcpy() destinations with flexible arrays
treewide: Replace open-coded flex arrays in unions
stddef: Introduce DECLARE_FLEX_ARRAY() helper
btrfs: Use memset_startat() to clear end of struct
string.h: Introduce memset_startat() for wiping trailing members and padding
xfrm: Use memset_after() to clear padding
string.h: Introduce memset_after() for wiping trailing members/padding
lib: Introduce CONFIG_MEMCPY_KUNIT_TEST
fortify: Add compile-time FORTIFY_SOURCE tests
fortify: Allow strlen() and strnlen() to pass compile-time known lengths
fortify: Prepare to improve strnlen() and strlen() warnings
fortify: Fix dropped strcpy() compile-time write overflow check
fortify: Explicitly disable Clang support
fortify: Move remaining fortify helpers into fortify-string.h
lib/string: Move helper functions out of string.c
compiler_types.h: Remove __compiletime_object_size()
cm4000_cs: Use struct_group() to zero struct cm4000_dev region
can: flexcan: Use struct_group() to zero struct flexcan_regs regions
...
Cross-architecture update to move task_struct::cpu back into thread_info
on arm64, x86, s390, powerpc, and riscv. All Acked by arch maintainers.
Quoting Ard Biesheuvel:
"Move task_struct::cpu back into thread_info
Keeping CPU in task_struct is problematic for architectures that define
raw_smp_processor_id() in terms of this field, as it requires
linux/sched.h to be included, which causes a lot of pain in terms of
circular dependencies (aka 'header soup')
This series moves it back into thread_info (where it came from) for all
architectures that enable THREAD_INFO_IN_TASK, addressing the header
soup issue as well as some pointless differences in the implementations
of task_cpu() and set_task_cpu()."
-----BEGIN PGP SIGNATURE-----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=PzvV
-----END PGP SIGNATURE-----
Merge tag 'cpu-to-thread_info-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull thread_info update to move 'cpu' back from task_struct from Kees Cook:
"Cross-architecture update to move task_struct::cpu back into
thread_info on arm64, x86, s390, powerpc, and riscv. All Acked by arch
maintainers.
Quoting Ard Biesheuvel:
'Move task_struct::cpu back into thread_info
Keeping CPU in task_struct is problematic for architectures that
define raw_smp_processor_id() in terms of this field, as it
requires linux/sched.h to be included, which causes a lot of pain
in terms of circular dependencies (aka 'header soup')
This series moves it back into thread_info (where it came from)
for all architectures that enable THREAD_INFO_IN_TASK, addressing
the header soup issue as well as some pointless differences in the
implementations of task_cpu() and set_task_cpu()'"
* tag 'cpu-to-thread_info-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
riscv: rely on core code to keep thread_info::cpu updated
powerpc: smp: remove hack to obtain offset of task_struct::cpu
sched: move CPU field back into thread_info if THREAD_INFO_IN_TASK=y
powerpc: add CPU field to struct thread_info
s390: add CPU field to struct thread_info
x86: add CPU field to struct thread_info
arm64: add CPU field to struct thread_info
by confidential computing solutions to query different aspects of the
system. The intent behind it is to unify testing of such aspects instead
of having each confidential computing solution add its own set of tests
to code paths in the kernel, leading to an unwieldy mess.
-----BEGIN PGP SIGNATURE-----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=Na0U
-----END PGP SIGNATURE-----
Merge tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull generic confidential computing updates from Borislav Petkov:
"Add an interface called cc_platform_has() which is supposed to be used
by confidential computing solutions to query different aspects of the
system.
The intent behind it is to unify testing of such aspects instead of
having each confidential computing solution add its own set of tests
to code paths in the kernel, leading to an unwieldy mess"
* tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide: Replace the use of mem_encrypt_active() with cc_platform_has()
x86/sev: Replace occurrences of sev_es_active() with cc_platform_has()
x86/sev: Replace occurrences of sev_active() with cc_platform_has()
x86/sme: Replace occurrences of sme_active() with cc_platform_has()
powerpc/pseries/svm: Add a powerpc version of cc_platform_has()
x86/sev: Add an x86 version of cc_platform_has()
arch/cc: Introduce a function to check for confidential computing features
x86/ioremap: Selectively build arch override encryption functions
- Revert the printk format based wchan() symbol resolution as it can leak
the raw value in case that the symbol is not resolvable.
- Make wchan() more robust and work with all kind of unwinders by
enforcing that the task stays blocked while unwinding is in progress.
- Prevent sched_fork() from accessing an invalid sched_task_group
- Improve asymmetric packing logic
- Extend scheduler statistics to RT and DL scheduling classes and add
statistics for bandwith burst to the SCHED_FAIR class.
- Properly account SCHED_IDLE entities
- Prevent a potential deadlock when initial priority is assigned to a
newly created kthread. A recent change to plug a race between cpuset and
__sched_setscheduler() introduced a new lock dependency which is now
triggered. Break the lock dependency chain by moving the priority
assignment to the thread function.
- Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.
- Improve idle balancing in general and especially for NOHZ enabled
systems.
- Provide proper interfaces for live patching so it does not have to
fiddle with scheduler internals.
- Add cluster aware scheduling support.
- A small set of tweaks for RT (irqwork, wait_task_inactive(), various
scheduler options and delaying mmdrop)
- The usual small tweaks and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=fgtS
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- Revert the printk format based wchan() symbol resolution as it can
leak the raw value in case that the symbol is not resolvable.
- Make wchan() more robust and work with all kind of unwinders by
enforcing that the task stays blocked while unwinding is in progress.
- Prevent sched_fork() from accessing an invalid sched_task_group
- Improve asymmetric packing logic
- Extend scheduler statistics to RT and DL scheduling classes and add
statistics for bandwith burst to the SCHED_FAIR class.
- Properly account SCHED_IDLE entities
- Prevent a potential deadlock when initial priority is assigned to a
newly created kthread. A recent change to plug a race between cpuset
and __sched_setscheduler() introduced a new lock dependency which is
now triggered. Break the lock dependency chain by moving the priority
assignment to the thread function.
- Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.
- Improve idle balancing in general and especially for NOHZ enabled
systems.
- Provide proper interfaces for live patching so it does not have to
fiddle with scheduler internals.
- Add cluster aware scheduling support.
- A small set of tweaks for RT (irqwork, wait_task_inactive(), various
scheduler options and delaying mmdrop)
- The usual small tweaks and improvements all over the place
* tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits)
sched/fair: Cleanup newidle_balance
sched/fair: Remove sysctl_sched_migration_cost condition
sched/fair: Wait before decaying max_newidle_lb_cost
sched/fair: Skip update_blocked_averages if we are defering load balance
sched/fair: Account update_blocked_averages in newidle_balance cost
x86: Fix __get_wchan() for !STACKTRACE
sched,x86: Fix L2 cache mask
sched/core: Remove rq_relock()
sched: Improve wake_up_all_idle_cpus() take #2
irq_work: Also rcuwait for !IRQ_WORK_HARD_IRQ on PREEMPT_RT
irq_work: Handle some irq_work in a per-CPU thread on PREEMPT_RT
irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support.
sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQ
sched: Add cluster scheduler level for x86
sched: Add cluster scheduler level in core and related Kconfig for ARM64
topology: Represent clusters of CPUs within a die
sched: Disable -Wunused-but-set-variable
sched: Add wrapper for get_wchan() to keep task blocked
x86: Fix get_wchan() to support the ORC unwinder
proc: Use task_is_running() for wchan in /proc/$pid/stat
...
- Move futex code into kernel/futex/ and split up the kitchen sink into
seperate files to make integration of sys_futex_waitv() simpler.
- Add a new sys_futex_waitv() syscall which allows to wait on multiple
futexes. The main use case is emulating Windows' WaitForMultipleObjects
which allows Wine to improve the performance of Windows Games. Also
native Linux games can benefit from this interface as this is a common
wait pattern for this kind of applications.
- Add context to ww_mutex_trylock() to provide a path for i915 to rework
their eviction code step by step without making lockdep upset until the
final steps of rework are completed. It's also useful for regulator and
TTM to avoid dropping locks in the non contended path.
- Lockdep and might_sleep() cleanups and improvements
- A few improvements for the RT substitutions.
- The usual small improvements and cleanups.
-----BEGIN PGP SIGNATURE-----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=RZ4x
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Thomas Gleixner:
- Move futex code into kernel/futex/ and split up the kitchen sink into
seperate files to make integration of sys_futex_waitv() simpler.
- Add a new sys_futex_waitv() syscall which allows to wait on multiple
futexes.
The main use case is emulating Windows' WaitForMultipleObjects which
allows Wine to improve the performance of Windows Games. Also native
Linux games can benefit from this interface as this is a common wait
pattern for this kind of applications.
- Add context to ww_mutex_trylock() to provide a path for i915 to
rework their eviction code step by step without making lockdep upset
until the final steps of rework are completed. It's also useful for
regulator and TTM to avoid dropping locks in the non contended path.
- Lockdep and might_sleep() cleanups and improvements
- A few improvements for the RT substitutions.
- The usual small improvements and cleanups.
* tag 'locking-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
locking: Remove spin_lock_flags() etc
locking/rwsem: Fix comments about reader optimistic lock stealing conditions
locking: Remove rcu_read_{,un}lock() for preempt_{dis,en}able()
locking/rwsem: Disable preemption for spinning region
docs: futex: Fix kernel-doc references
futex: Fix PREEMPT_RT build
futex2: Documentation: Document sys_futex_waitv() uAPI
selftests: futex: Test sys_futex_waitv() wouldblock
selftests: futex: Test sys_futex_waitv() timeout
selftests: futex: Add sys_futex_waitv() test
futex,arm: Wire up sys_futex_waitv()
futex,x86: Wire up sys_futex_waitv()
futex: Implement sys_futex_waitv()
futex: Simplify double_lock_hb()
futex: Split out wait/wake
futex: Split out requeue
futex: Rename mark_wake_futex()
futex: Rename: match_futex()
futex: Rename: hb_waiter_{inc,dec,pending}()
futex: Split out PI futex
...
* Fixes for Xen emulator bugs showing up as debug kernel WARNs
* Fix another issue with SEV/ES string I/O VMGEXITs
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmF6uGIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNRagf/Srvk9lNcRh4cEzsczErKMyr3xOqA
jgsTSqgl1ExJI9sBLMpVYBOFGILMaMSrhLPIltKPy0Bj/E+hw8WOQwPa44QjWlSD
MAUxO1Nryt9Luc2L8uSd1c//g4fr4V1BhOaumk1lM14Q8EDfQBcDIMI2ZKueMU1+
2Q+n8/AsG63jQIINwKNidof0dzRtbfcE30Wq/8QHttIPo5wt6l0YClOlOikqNY8N
5+WSQFmuutHIXftq5Jb/Ldn/+HVukWZyZOEVwLnBpM9uBvIubNgcEakqvxsaVtAn
FHdvnA+Bk99/Xuhl+wRLQo8ofzQIQ13RQv3HPArJAJv34oAJZx2rNObVlA==
=6ofB
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Fixes for s390 interrupt delivery
- Fixes for Xen emulator bugs showing up as debug kernel WARNs
- Fix another issue with SEV/ES string I/O VMGEXITs
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Take srcu lock in post_kvm_run_save()
KVM: SEV-ES: fix another issue with string I/O VMGEXITs
KVM: x86/xen: Fix kvm_xen_has_interrupt() sleeping in kvm_vcpu_block()
KVM: x86: switch pvclock_gtod_sync_lock to a raw spinlock
KVM: s390: preserve deliverable_mask in __airqs_kick_single_vcpu
KVM: s390: clear kicked_mask before sleeping again
- More progress on the protected VM front, now with the full
fixed feature set as well as the limitation of some hypercalls
after initialisation.
- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
- Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
- More memcg accounting of the memory allocated on behalf of a guest
- Timer and vgic selftests
- Workarounds for the Apple M1 broken vgic implementation
- KConfig cleanups
- New kvmarm.mode=none option, for those who really dislike us
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmF7u5YPHG1hekBrZXJu
ZWwub3JnAAoJECPQ0LrRPXpD6w8QAIKDLJCTqkxv5Vh4ZSmtXxg4gTZMBlg8oSQ8
sVL639aqBvFe3A6Vmz6IwBm+NT7Sm1zxkuH9qHzVR1gmXq0oLYNrIuyrzRW8PvqO
hIkSRRoVsf03755TmkxwR7/2jAFxb6FhEVAy6VWdQyI44orihIPvMp8aTIq+jvU+
XoNGb/rPf9HpSUtvuaHYvZhSZBhoi5dRnkr33R1+VR69n7Axs8lm905xcl6Pt0a0
QqYZWQvFu/BXPyNflG7LUsegRF/iiV2vNTbNNowkzlV5suqxBpJAp6ApDL/gWrHv
ya/6cMqicSjBIkWnawhXY98w6/5xfzK4IV/zc00FNWOlUdVP89Thqrgc8EkigS9R
BGcxFFqj41snr+ensSBBIkNtV+dBX52H3rUE0F9seiTXm8QWI86JobdeNadT8tUP
TXdOeCUcA+cp4Ngln18lsbOEaBkPA5H1po1nUFPHbKnVOxnqXScB7E/xF6rAbryV
m+Z+oidU7MyS/Ev/Da0ww/XFx7cs2ez9EgeQvjcdFAvUMqS6kcXEExvgGYlm+KRQ
GBMKPLCNHKdflMANoSpol7MZUmPJ45XoWKW1rntj2r9X+oJW2Z2hEx32xrWDJdqK
ixnbjog5kNZb0CjLGsUC90lo2hpRJecaLhAjgTLYaNC1QxGPrt92eat6gnwuMTBc
mpADqi7w
=qBAO
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.16
- More progress on the protected VM front, now with the full
fixed feature set as well as the limitation of some hypercalls
after initialisation.
- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
- Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
- More memcg accounting of the memory allocated on behalf of a guest
- Timer and vgic selftests
- Workarounds for the Apple M1 broken vgic implementation
- KConfig cleanups
- New kvmarm.mode=none option, for those who really dislike us
parisc, ia64 and powerpc32 are the only remaining architectures that
provide custom arch_{spin,read,write}_lock_flags() functions, which are
meant to re-enable interrupts while waiting for a spinlock.
However, none of these can actually run into this codepath, because
it is only called on architectures without CONFIG_GENERIC_LOCKBREAK,
or when CONFIG_DEBUG_LOCK_ALLOC is set without CONFIG_LOCKDEP, and none
of those combinations are possible on the three architectures.
Going back in the git history, it appears that arch/mn10300 may have
been able to run into this code path, but there is a good chance that
it never worked. On the architectures that still exist, it was
already impossible to hit back in 2008 after the introduction of
CONFIG_GENERIC_LOCKBREAK, and possibly earlier.
As this is all dead code, just remove it and the helper functions built
around it. For arch/ia64, the inline asm could be cleaned up, but
it seems safer to leave it untouched.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Link: https://lore.kernel.org/r/20211022120058.1031690-1-arnd@kernel.org
Now that force_fatal_sig exists it is unnecessary and a bit confusing
to use force_sigsegv in cases where the simpler force_fatal_sig is
wanted. So change every instance we can to make the code clearer.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Link: https://lkml.kernel.org/r/877de7jrev.fsf@disp2133
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reading the history it is unclear why default_trap_handler calls
do_exit. It is not even menthioned in the commit where the change
happened. My best guess is that because it is unknown why the
exception happened it was desired to guarantee the process never
returned to userspace.
Using do_exit(SIGSEGV) has the problem that it will only terminate one
thread of a process, leaving the process in an undefined state.
Use force_sigsegv(SIGSEGV) instead which effectively has the same
behavior except that is uses the ordinary signal mechanism and
terminates all threads of a process and is generally well defined.
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Fixes: ca2ab03237ec ("[PATCH] s390: core changes")
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lkml.kernel.org/r/20211020174406.17889-11-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The diag 318 data contains values that denote information regarding the
guest's environment. Currently, it is unecessarily difficult to observe
this value (either manually-inserted debug statements, gdb stepping, mem
dumping etc). It's useful to observe this information to obtain an
at-a-glance view of the guest's environment, so lets add a simple VCPU
event that prints the CPNC to the s390dbf logs.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20211027025451.290124-1-walling@linux.ibm.com
[borntraeger@de.ibm.com]: change debug level to 3
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Introduce variants of the convert and destroy page functions that also
clear the PG_arch_1 bit used to mark them as secure pages.
The PG_arch_1 flag is always allowed to overindicate; using the new
functions introduced here allows to reduce the extent of overindication
and thus improve performance.
These new functions can only be called on pages for which a reference
is already being held.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20210920132502.36111-7-imbrenda@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If handle_sske cannot set the storage key, because there is no
page table entry or no present large page entry, it calls
fixup_user_fault.
However, currently, if the call succeeds, handle_sske returns
-EAGAIN, without having set the storage key.
Instead, retry by continue'ing the loop without incrementing the
address.
The same issue in handle_pfmf was fixed by
a11bdb1a6b ("KVM: s390: Fix pfmf and conditional skey emulation").
Fixes: bd096f6443 ("KVM: s390: Add skey emulation fault handling")
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20211022152648.26536-1-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Allow to configure the command line to an arbitrary length, with a
default of 4096 bytes. Also remove COMMAND_LINE_SIZE from
include/uapi/asm/setup.h as this is dynamic now and doesn't tell
anything about the command line size limitations of a new kernel
that might be loaded.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Currently s390 supports a fixed maximum command line length of 896
bytes. This isn't enough as some installers are trying to pass all
configuration data via kernel command line, and even with zfcp alone
it is easy to generate really long command lines. Therefore extend
the command line to 4 kbytes.
In the parm area where the command line is stored there is no indication
of the maximum allowed length, so a new field which contains the maximum
length is added.
The parm area has always been initialized to zero, so with old kernels
this field would read zero. This is important because tools like zipl
could read this field. If it contains a number larger than zero zipl
knows the maximum length that can be stored in the parm area, otherwise
it must assume that it is booting a legacy kernel and only 896 bytes are
available.
The removing of trailing whitespace in head.S is also removed because
code to do this is already present in setup_boot_command_line().
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In preparation of adding support for command lines with variable
sizes on s390, the check whether the new kernel image is at least HEAD_END
bytes long isn't correct. Move the check to kexec_file_add_components()
so we can get the size of the parm area and check the size there.
The '.org HEAD_END' directive can now also be removed from head.S. This
was used in the past to reserve space for the early sccb buffer, but with
commit 9a5131b87cac1 ("s390/boot: move sclp early buffer from fixed address
in asm to C") this is no longer required.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Some applications map the same memory area for DMA multiple times while
also mapping significant amounts of memory. With our current DMA code
these applications will run out of DMA addresses after mapping half of
the available memory because the number of DMA mappings is constrained
by the number of concurrently active DMA addresses we support which in
turn is limited by the minimum of hardware constraints and high_memory.
Limiting the number of active DMA addresses to high_memory is only
a heuristic to save memory used by the iommu_bitmap and DMA page tables
however. This was added under the assumption that it rarely makes sense
to DMA map more than system memory.
To accommodate special applications which insist on double mapping, which
works on other platforms, allow specifying a factor of how many times
installed memory is available as DMA address space. Use 0 as a special
value to apply no constraints beyond what hardware dictates at the
expense of significantly more memory use.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The generic version of strlcpy is identical to the architecure
specific variant.
Therefore use the generic variant.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use generic strrchr instead of an optimized architecture specific
variant. Performance of strrchr is not relevant for real life
workloads, since the only user which may call this more frequently
would be kbasename().
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/lkml/CAHk-=whoe211F8ND-9hZvfnib0UA4gga8DZJ+YaBZNbE4fubdg@mail.gmail.com/
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Commit a029a4eab3 ("s390/cpumf: Allow concurrent access for CPU Measurement Counter Facility")
added CPU Measurement counter facility access to multiple consumers.
It allows concurrent access to the CPU Measurement counter facility
via several perf_event_open() system call invocations and via ioctl()
system call of device /dev/hwc. However the access via device /dev/hwc
was exclusive, only one process was able to open this device.
The patch removes this restriction. Now multiple invocations of lshwc
can execute in parallel. They can access different CPUs and counter
sets or CPUs and counter set can overlap.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The Breaking-Event-Address-Register (BEAR) stores the address of the
last breaking event instruction. Breaking events are usually instructions
that change the program flow - for example branches, and instructions
that modify the address in the PSW like lpswe. This is useful for debugging
wild branches, because one could easily figure out where the wild branch
was originating from.
What is problematic is that lpswe is considered a breaking event, and
therefore overwrites BEAR on kernel exit. The BEAR enhancement facility
adds new instructions that allow to save/restore BEAR and also an lpswey
instruction that doesn't cause a breaking event. So we can save BEAR on
kernel entry and restore it on exit to user space.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
and replace all of the "__is_defined(CC_USING_EXPOLINE) && !nospec_disable"
occurrences.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
With the upcoming BEAR enhancements last_break isn't really
unique, so rename it to pgm_last_break. This way it should
be more obvious that this is the last_break value that is
written by the hardware when a program check occurs.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Instead of using args[0] for the value of the last breaking event
address register, add a member to make things more obvious.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Provide physical addresses whenever the hardware interface
expects it or a 32-bit value used for tracking.
Variable sclp_early_sccb gets initialized in the decompressor
and points to an address in physcal memory. Yet, it is used
as virtual memory pointer and therefore should be converted.
Note, the other two __bootdata variables sclp_info_sccb and
sclp_info_sccb_valid contain plain data, but no pointers and
do need any special care.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Variables initrd_start and initrd_end are expected to hold
virtual memory pointers, not physical.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
memblock_reserve() function accepts physcal address of a memory
block to be reserved, but provided with virtual memory pointers.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Instructions IPTE, IDTE and CRDTE accept Page-Table Origin
as one of the arguments, but instead the pgtable virtual
address is passed. Fix that and also update the crdte()
prototype to conform to csp() and cspg() friends.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
pci and string functions changes on features depend on changes from the
fixes branch.
* fixes:
s390: add Alexander Gordeev as reviewer
s390: fix strrchr() implementation
vfio-ccw: step down as maintainer
KVM: s390: remove myself as reviewer
s390/pci: fix zpci_zdev_put() on reserve
bpf, s390: Fix potential memory leak about jit_data
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
qdio.ko no longer needs to care about how the QAOBs are allocated,
from its perspective they are merely another parameter to do_QDIO().
So for a start, shift the cache into the only qdio driver that uses
QAOBs (ie. qeth). Here there's further opportunity to optimize its
usage in the future - eg. make it per-{device, TX queue}, or only
compile it when the driver is built with CQ/QAOB support.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This capability exists, but we don't record anything when userspace
enables it. Let's refactor that code so that a note can be made in
the debug logs that it was enabled.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20211008203112.1979843-7-farman@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The Principles of Operations describe the various reasons that
each individual SIGP orders might be rejected, and the status
bit that are set for each condition.
For example, for the Set Architecture order, it states:
"If it is not true that all other CPUs in the configu-
ration are in the stopped or check-stop state, ...
bit 54 (incorrect state) ... is set to one."
However, it also states:
"... if the CZAM facility is installed, ...
bit 55 (invalid parameter) ... is set to one."
Since the Configuration-z/Architecture-Architectural Mode (CZAM)
facility is unconditionally presented, there is no need to examine
each VCPU to determine if it is started/stopped. It can simply be
rejected outright with the Invalid Parameter bit.
Fixes: b697e435ae ("KVM: s390: Support Configuration z/Architecture Mode")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20211008203112.1979843-2-farman@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Improve make_secure_pte to avoid stalls when the system is heavily
overcommitted. This was especially problematic in kvm_s390_pv_unpack,
because of the loop over all pages that needed unpacking.
Due to the locks being held, it was not possible to simply replace
uv_call with uv_call_sched. A more complex approach was
needed, in which uv_call is replaced with __uv_call, which does not
loop. When the UVC needs to be executed again, -EAGAIN is returned, and
the caller (or its caller) will try again.
When -EAGAIN is returned, the path is the same as when the page is in
writeback (and the writeback check is also performed, which is
harmless).
Fixes: 214d9bbcd3 ("s390/mm: provide memory management functions for protected KVM guests")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20210920132502.36111-5-imbrenda@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When the system is heavily overcommitted, kvm_s390_pv_init_vm might
generate stall notifications.
Fix this by using uv_call_sched instead of just uv_call. This is ok because
we are not holding spinlocks.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: 214d9bbcd3 ("s390/mm: provide memory management functions for protected KVM guests")
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20210920132502.36111-4-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If kvm_s390_pv_destroy_cpu is called more than once, we risk calling
free_page on a random page, since the sidad field is aliased with the
gbea, which is not guaranteed to be zero.
This can happen, for example, if userspace calls the KVM_PV_DISABLE
IOCTL, and it fails, and then userspace calls the same IOCTL again.
This scenario is only possible if KVM has some serious bug or if the
hardware is broken.
The solution is to simply return successfully immediately if the vCPU
was already non secure.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: 19e1227768 ("KVM: S390: protvirt: Introduce instruction data area bounce buffer")
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20210920132502.36111-3-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add macros to describe the 4 possible CC values returned by the UVC
instruction.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20210920132502.36111-2-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We already optimize get_guest_storage_key() to assume that if we don't have
a PTE table and don't have a huge page mapped that the storage key is 0.
Similarly, optimize reset_guest_reference_bit() to simply do nothing if
there is no PTE table and no huge page mapped.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210909162248.14969-10-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We already optimize get_guest_storage_key() to assume that if we don't have
a PTE table and don't have a huge page mapped that the storage key is 0.
Similarly, optimize set_guest_storage_key() to simply do nothing in case
the key to set is 0.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210909162248.14969-9-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We should not walk/touch page tables outside of VMA boundaries when
holding only the mmap sem in read mode. Evil user space can modify the
VMA layout just before this function runs and e.g., trigger races with
page table removal code since commit dd2283f260 ("mm: mmap: zap pages
with read mmap_sem in munmap").
find_vma() does not check if the address is >= the VMA start address;
use vma_lookup() instead.
Fixes: 214d9bbcd3 ("s390/mm: provide memory management functions for protected KVM guests")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Link: https://lore.kernel.org/r/20210909162248.14969-6-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
There are multiple things broken about our storage key handling
functions:
1. We should not walk/touch page tables outside of VMA boundaries when
holding only the mmap sem in read mode. Evil user space can modify the
VMA layout just before this function runs and e.g., trigger races with
page table removal code since commit dd2283f260 ("mm: mmap: zap pages
with read mmap_sem in munmap"). gfn_to_hva() will only translate using
KVM memory regions, but won't validate the VMA.
2. We should not allocate page tables outside of VMA boundaries: if
evil user space decides to map hugetlbfs to these ranges, bad things
will happen because we suddenly have PTE or PMD page tables where we
shouldn't have them.
3. We don't handle large PUDs that might suddenly appeared inside our page
table hierarchy.
Don't manually allocate page tables, properly validate that we have VMA and
bail out on pud_large().
All callers of page table handling functions, except
get_guest_storage_key(), call fixup_user_fault() in case they
receive an -EFAULT and retry; this will allocate the necessary page tables
if required.
To keep get_guest_storage_key() working as expected and not requiring
kvm_s390_get_skeys() to call fixup_user_fault() distinguish between
"there is simply no page table or huge page yet and the key is assumed
to be 0" and "this is a fault to be reported".
Although commit 637ff9efe5 ("s390/mm: Add huge pmd storage key handling")
introduced most of the affected code, it was actually already broken
before when using get_locked_pte() without any VMA checks.
Note: Ever since commit 637ff9efe5 ("s390/mm: Add huge pmd storage key
handling") we can no longer set a guest storage key (for example from
QEMU during VM live migration) without actually resolving a fault.
Although we would have created most page tables, we would choke on the
!pmd_present(), requiring a call to fixup_user_fault(). I would
have thought that this is problematic in combination with postcopy life
migration ... but nobody noticed and this patch doesn't change the
situation. So maybe it's just fine.
Fixes: 9fcf93b5de ("KVM: S390: Create helper function get_guest_storage_key")
Fixes: 24d5dd0208 ("s390/kvm: Provide function for setting the guest storage key")
Fixes: a7e19ab55f ("KVM: s390: handle missing storage-key facility")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210909162248.14969-5-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We should not walk/touch page tables outside of VMA boundaries when
holding only the mmap sem in read mode. Evil user space can modify the
VMA layout just before this function runs and e.g., trigger races with
page table removal code since commit dd2283f260 ("mm: mmap: zap pages
with read mmap_sem in munmap"). gfn_to_hva() will only translate using
KVM memory regions, but won't validate the VMA.
Further, we should not allocate page tables outside of VMA boundaries: if
evil user space decides to map hugetlbfs to these ranges, bad things will
happen because we suddenly have PTE or PMD page tables where we
shouldn't have them.
Similarly, we have to check if we suddenly find a hugetlbfs VMA, before
calling get_locked_pte().
Fixes: 2d42f94773 ("s390/kvm: Add PGSTE manipulation functions")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210909162248.14969-4-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
... otherwise we will try unlocking a spinlock that was never locked via a
garbage pointer.
At the time we reach this code path, we usually successfully looked up
a PGSTE already; however, evil user space could have manipulated the VMA
layout in the meantime and triggered removal of the page table.
Fixes: 1e133ab296 ("s390/mm: split arch/s390/mm/pgtable.c")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210909162248.14969-3-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We should not walk/touch page tables outside of VMA boundaries when
holding only the mmap sem in read mode. Evil user space can modify the
VMA layout just before this function runs and e.g., trigger races with
page table removal code since commit dd2283f260 ("mm: mmap: zap pages
with read mmap_sem in munmap"). The pure prescence in our guest_to_host
radix tree does not imply that there is a VMA.
Further, we should not allocate page tables (via get_locked_pte()) outside
of VMA boundaries: if evil user space decides to map hugetlbfs to these
ranges, bad things will happen because we suddenly have PTE or PMD page
tables where we shouldn't have them.
Similarly, we have to check if we suddenly find a hugetlbfs VMA, before
calling get_locked_pte().
Note that gmap_discard() is different:
zap_page_range()->unmap_single_vma() makes sure to stay within VMA
boundaries.
Fixes: b31288fa83 ("s390/kvm: support collaborative memory management")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210909162248.14969-2-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Documentation/kbuild/makefiles.rst suggests to use "archclean" for
cleaning arch/$(SRCARCH)/boot/, but it is not a hard requirement.
Since commit d92cc4d516 ("kbuild: require all architectures to have
arch/$(SRCARCH)/Kbuild"), we can use the "subdir- += boot" trick for
all architectures. This can take advantage of the parallel option (-j)
for "make clean".
I also cleaned up the comments in arch/$(SRCARCH)/Makefile. The "archdep"
target no longer exists.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
On nds32, openrisc, s390, sh, and xtensa the function die never
returns. Mark die __noreturn so that no one expects die to return.
Remove the do_exit calls after die as they will never be reached.
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: openrisc@lists.librecores.org
Cc: Nick Hu <nickhu@andestech.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Fixes: 2.3.16
Fixes: 2.3.99-pre8
Fixes: 3f65ce4d14 ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 5")
Fixes: 664eec400b ("nds32: MMU fault handling and page table management")
Fixes: 61e85e3675 ("OpenRISC: Memory management")
Link: https://lkml.kernel.org/r/20211020174406.17889-2-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
* kvm_stat: do not show halt_wait_ns since it is not a cumulative statistic
x86:
* clean ups and fixes for bus lock vmexit and lazy allocation of rmaps
* two fixes for SEV-ES (one more coming as soon as I get reviews)
* fix for static_key underflow
ARM:
* Properly refcount pages used as a concatenated stage-2 PGD
* Fix missing unlock when detecting the use of MTE+VM_SHARED
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmFtuqYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNGbAf9Ha4mlieY7lDQLk96GydPwlMofi1B
dteRaWizokT0Xk7HovPr8G1zwwE9DrqO1FuHiZrkckzf7cloaPDvncLag3D3Vakr
dWIqa7MaavSWBKDpcEIKOEo2SfIBU38xXQSEpegz2f2fhZK0Ud2xUNtGQMNrYatX
Lz6FXHRvHDmv4+9EjASoGBd0/C/NxMaumYa1VOxMt8JPyn+zho0z5rUDKDF4pg70
KAgxVZuksy15XFRTgaSaU0BqVn9uCHwZVqRFKBm+ocPXIFjhdMkgrxJ7NSYB1T+N
VFqcUBTFTjhg9e5eZnQ6GMf9FXpLzK912VhCRd0uU5PGeBwUDJTSnyu5OQ==
=GZqR
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Tools:
- kvm_stat: do not show halt_wait_ns since it is not a cumulative statistic
x86:
- clean ups and fixes for bus lock vmexit and lazy allocation of rmaps
- two fixes for SEV-ES (one more coming as soon as I get reviews)
- fix for static_key underflow
ARM:
- Properly refcount pages used as a concatenated stage-2 PGD
- Fix missing unlock when detecting the use of MTE+VM_SHARED"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV-ES: reduce ghcb_sa_len to 32 bits
KVM: VMX: Remove redundant handling of bus lock vmexit
KVM: kvm_stat: do not show halt_wait_ns
KVM: x86: WARN if APIC HW/SW disable static keys are non-zero on unload
Revert "KVM: x86: Open code necessary bits of kvm_lapic_set_base() at vCPU RESET"
KVM: SEV-ES: Set guest_state_protected after VMSA update
KVM: X86: fix lazy allocation of rmaps
KVM: SEV-ES: fix length of string I/O
KVM: arm64: Release mmap_lock when using VM_SHARED with MTE
KVM: arm64: Report corrupted refcount at EL2
KVM: arm64: Fix host stage-2 PGD refcount
KVM: s390: Function documentation fixes
Changing the deliverable mask in __airqs_kick_single_vcpu() is a bug. If
one idle vcpu can't take the interrupts we want to deliver, we should
look for another vcpu that can, instead of saying that we don't want
to deliver these interrupts by clearing the bits from the
deliverable_mask.
Fixes: 9f30f62163 ("KVM: s390: add gib_alert_irq_handler()")
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20211019175401.3757927-3-pasic@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The idea behind kicked mask is that we should not re-kick a vcpu that
is already in the "kick" process, i.e. that was kicked and is
is about to be dispatched if certain conditions are met.
The problem with the current implementation is, that it assumes the
kicked vcpu is going to enter SIE shortly. But under certain
circumstances, the vcpu we just kicked will be deemed non-runnable and
will remain in wait state. This can happen, if the interrupt(s) this
vcpu got kicked to deal with got already cleared (because the interrupts
got delivered to another vcpu). In this case kvm_arch_vcpu_runnable()
would return false, and the vcpu would remain in kvm_vcpu_block(),
but this time with its kicked_mask bit set. So next time around we
wouldn't kick the vcpu form __airqs_kick_single_vcpu(), but would assume
that we just kicked it.
Let us make sure the kicked_mask is cleared before we give up on
re-dispatching the vcpu.
Fixes: 9f30f62163 ("KVM: s390: add gib_alert_irq_handler()")
Reported-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20211019175401.3757927-2-pasic@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add s390 support for ftrace direct call samples, which also enables
ftrace direct call selftests within ftrace selftests.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20211012133802.2460757-5-hca@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Make STACK_FRAME_OVERHEAD available via asm-offsets.h. This allows to
add s390 specific asm code to e.g. ftrace samples, without requiring
to add random header files, which might cause all sort of problems on
other architectures. asm-offsets.h can be assumed to be non-problematic.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20211012133802.2460757-3-hca@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Having a stable wchan means the process must be blocked and for it to
stay that way while performing stack unwinding.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm]
Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Link: https://lkml.kernel.org/r/20211008111626.332092234@infradead.org
Fix two problems found in the strrchr() implementation for s390
architectures: evaluate empty strings (return the string address instead of
NULL, if '\0' is passed as second argument); evaluate the first character
of non-empty strings (the current implementation stops at the second).
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reported-by: Heiko Carstens <hca@linux.ibm.com> (incorrect behavior with empty strings)
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Link: https://lore.kernel.org/r/20211005120836.60630-1-roberto.sassu@huawei.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add regs_get_kernel_argument() which returns Nth argument of a
function call.
This enables ftrace kprobe events to access kernel function arguments
via $argN syntax.
This is the s390 variant of commit a823c35ff2 ("arm64: ptrace: Add
function argument access API").
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
ftrace_regs_caller is an alias to ftrace_caller - making ftrace_caller
quite heavyweight. Split the function and provide an ftrace_caller
implementation which comes with fewer instructions. Especially getting
rid of 'stosm' on each function entry should help here, e.g. to
have less performance impact on live patched functions.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add ftrace_instruction_pointer_set() helper function to match x86.
See commit 2860cd8a23 ("livepatch: Use the default ftrace_ops
instead of REGS when ARGS is available").
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add HAVE_DYNAMIC_FTRACE_WITH_ARGS support similar to commit 02a474ca26
("ftrace/x86: Allow for arguments to be passed in to ftrace_regs by default").
s390's ftrace implementation always provides all registers with
pt_regs, therefore this is trivial.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Trivial patch just to get rid of the leading underscores.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Specify HAVE_JUMP_LABEL_BATCH in header file. This allows to make use
of the arch_jump_label_transform_queue()/arch_jump_label_transform_apply()
mechanism.
However unlike on x86, which currently is the only user of this
mechanism, the to be patched instructions are still directly
modified. The only difference to before is that serialization is only
done after all instructions have been modified. This way the number of
serialization/synchronization events is reduced.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
CPUs must be serialized also when ftrace_graph_caller gets patched.
This is missing since ftrace function graph support was added on s390.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Introduce a text_poke_sync() similar to what x86 has. This can be
used to execute a serializing instruction on all CPUs (including
the current one).
Note: according to the Principles of Operation an IPI (= interrupt)
will already serialize a CPU, however it is better to be explicit. In
addition on_each_cpu() makes sure that also the current CPU get
serialized - just to make sure that possible preemption can prevent
some theoretical case where a CPU will not be serialized.
Therefore text_poke_sync() has to be used whenever code got modified,
just to avoid to rely on implicit serialization.
Also introduce text_poke_sync_lock() which will also disable CPU
hotplug, to prevent that any CPU is just going online with a
prefetched old version of a modified instruction.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Factor out bcr_serialize() inline assembly function which describes
what the bcr instruction is used for.
Use bcr_serialize() like before in mb(), but also in upcoming changes.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Modified stack unwinder self tests to use kunit framework. The
functionality stayed the same but the output format is now in tap13
format.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Fix kernel-doc warning due to incorrect parameter name in
kernel-doc function notation:
../arch/s390/include/asm/debug.h:484: warning: Function parameter or member 'pages' not described in 'DEFINE_STATIC_DEBUG_INFO'
../arch/s390/include/asm/debug.h:484: warning: Excess function parameter 'pages_per_area' description in 'DEFINE_STATIC_DEBUG_INFO'
Fixes: d72541f945 ("s390/debug: add early tracing support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Link: https://lore.kernel.org/r/20211005051657.16714-1-rdunlap@infradead.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Most of ARCHs use empty ftrace_dyn_arch_init(), introduce a weak common
ftrace_dyn_arch_init() to cleanup them.
Link: https://lkml.kernel.org/r/20210909090216.1955240-1-o451686892@gmail.com
Acked-by: Heiko Carstens <hca@linux.ibm.com> (s390)
Acked-by: Helge Deller <deller@gmx.de> (parisc)
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Replace uses of mem_encrypt_active() with calls to cc_platform_has() with
the CC_ATTR_MEM_ENCRYPT attribute.
Remove the implementation of mem_encrypt_active() across all arches.
For s390, since the default implementation of the cc_platform_has()
matches the s390 implementation of mem_encrypt_active(), cc_platform_has()
does not need to be implemented in s390 (the config option
ARCH_HAS_CC_PLATFORM is not set).
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210928191009.32551-9-bp@alien8.de
The memory for amode31 section is allocated from the decompressed
kernel. Instead, allocate that memory from the decompressor. This
is a prerequisite to allow initialization of the virtual memory
before the decompressed kernel takes over.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Partially revert commit 4555b9f34296 ("s390/boot: move
dma sections from decompressor to decompressed kernel").
This is a prerequisite to allow initialization of virtual
memory in decompressor and avoid overwriting of ASCEs in
the decompressed kernel otherwise.
Since the control registers 2, 5 and 15 are reinitialized
in the decompressed kernel again, this change does not
prevent relocating of amode31 section in any way.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add a few testcases to make sure that it's not possible to place
a kprobe in the mid of an instruction on s390.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
FTRACE_GEN_NOP_ASM(name) can be used to generate assembly functions with
the required information added to allow tracing via kprobes/ftrace. It
adds the nop instruction which will be patched by ftrace later. If the
compiler supports -mnop-mcount it will also add an entry to the
__mcount_loc section.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
We often need to figure out what operations were performed in response
to an error or availability event. The operations are easily accessible
in s390dbf/pci_msg but the events have to be correlated with these from
either the kernel log or s390dbf/pci_err. Improve this situation by
logging the most important data from error and availability events that
is the FID, PEC and FH together with the operations.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Since commit 8256adda1f ("s390/pci: handle FH state mismatch only on
disable") zpci_disable_device() returns -EINVAL when the platform
detects an attempt to disable a PCI function that it sees as already
disabled.
In most situations we want to abort whenever this happens and abort is
possible since it either means that the device vanished but we haven't
gotten an availability event yet, or the FH got out of sync which should
not happen.
Unfortunately there is an inconsistency between the LPAR and z/VM
hypervisors on whether error events for PCI functions contain an
an enabled or a general handle. So under z/VM it can happen that our
most up to date function handle is enabled but trying to disable the
function results in the aforementioned error.
Since recover is designed to be used to recover functions from the error
state let's make it robust to this inconsistency by explicitly treating
it as a successful disable.
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Check whether the specified address points to the start of an
instruction to prevent users from setting a kprobe in the mid of
an instruction which would crash the kernel.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
ftrace_shared_hotpatch_trampoline() never returns NULL,
therefore quite a bit of code can be removed.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Since commit 2a671f77ee ("s390/pci: fix use after free of zpci_dev")
the reference count of a zpci_dev is incremented between
pcibios_add_device() and pcibios_release_device() which was supposed to
prevent the zpci_dev from being freed while the common PCI code has
access to it. It was missed however that the handling of zPCI
availability events assumed that once zpci_zdev_put() was called no
later availability event would still see the device. With the previously
mentioned commit however this assumption no longer holds and we must
make sure that we only drop the initial long-lived reference the zPCI
subsystem holds exactly once.
Do so by introducing a zpci_device_reserved() function that handles when
a device is reserved. Here we make sure the zpci_dev will not be
considered for further events by removing it from the zpci_list.
This also means that the device actually stays in the
ZPCI_FN_STATE_RESERVED state between the time we know it has been
reserved and the final reference going away. We thus need to consider it
a real state instead of just a conceptual state after the removal. The
final cleanup of PCI resources, removal from zbus, and destruction of
the IOMMU stays in zpci_release_device() to make sure holders of the
reference do see valid data until the release.
Fixes: 2a671f77ee ("s390/pci: fix use after free of zpci_dev")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Make sure to free jit_data through kfree() in the error path.
Fixes: 1c8f9b91c4 ("bpf: s390: add JIT support for multi-function programs")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Replace audit syscall class magic numbers with macros.
This required putting the macros into new header file
include/linux/audit_arch.h since the syscall macros were
included for both 64 bit and 32 bit in any compat code, causing
redefinition warnings.
Link: https://lore.kernel.org/r/2300b1083a32aade7ae7efb95826e8f3f260b1df.1621363275.git.rgb@redhat.com
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
[PM: renamed header to audit_arch.h after consulting with Richard]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Since now there is kretprobe_trampoline_addr() for referring the
address of kretprobe trampoline code, we don't need to access
kretprobe_trampoline directly.
Make it harder to refer by renaming it to __kretprobe_trampoline().
Link: https://lkml.kernel.org/r/163163045446.489837.14510577516938803097.stgit@devnote2
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The __kretprobe_trampoline_handler() callback, called from low level
arch kprobes methods, has the 'trampoline_address' parameter, which is
entirely superfluous as it basically just replicates:
dereference_kernel_function_descriptor(kretprobe_trampoline)
In fact we had bugs in arch code where it wasn't replicated correctly.
So remove this superfluous parameter and use kretprobe_trampoline_addr()
instead.
Link: https://lkml.kernel.org/r/163163044546.489837.13505751885476015002.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This clean up the error/notification messages in kprobes related code.
Basically this defines 'pr_fmt()' macros for each files and update
the messages which describes
- what happened,
- what is the kernel going to do or not do,
- is the kernel fine,
- what can the user do about it.
Also, if the message is not needed (e.g. the function returns unique
error code, or other error message is already shown.) remove it,
and replace the message with WARN_*() macros if suitable.
Link: https://lkml.kernel.org/r/163163036568.489837.14085396178727185469.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The CPU field will be moved back into thread_info even when
THREAD_INFO_IN_TASK is enabled, so add it back to s390's definition of
struct thread_info.
Note that s390 always has CONFIG_SMP=y so there is no point in guarding
the CPU field with an #ifdef.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
The latest compile changes pointed us to a few instances where we use
the kernel documentation style but don't explain all variables or
don't adhere to it 100%.
It's easy to fix so let's do that.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
- missing TLB flush
- nested virtualization fixes for SMM (secure boot on nested hypervisor)
and other nested SVM fixes
- syscall fuzzing fixes
- live migration fix for AMD SEV
- mirror VMs now work for SEV-ES too
- fixes for reset
- possible out-of-bounds access in IOAPIC emulation
- fix enlightened VMCS on Windows 2022
ARM:
- Add missing FORCE target when building the EL2 object
- Fix a PMU probe regression on some platforms
Generic:
- KCSAN fixes
selftests:
- random fixes, mostly for clang compilation
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmFN0EwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNqaQf/Vx7ePFTqwWpo+8wKapnc6JN9SLjC
hM4jipxfc1WyQWcfCt8ZuPhCnhF7o8mG/mrqTm+JB+oGqIsydHW19DiUT8ekv09F
dQ+XYSiR4B547wUH5XLQc4xG9imwYlXGEOHqrE7eJvGH3LOqVFX2fLRBnFefZbO8
GKhRJrGXwG3/JSAP6A0c22iVU+pLbfV9gpKwrAj0V7o8nzT2b3Wmh74WBNb47BzE
a4+AwKpWO4rqJGOwdYwy67pdFHh1YmrlZ59cFZc7fzlXE+o0D0bitaJyioZALpOl
4mRGdzoYkNB++ZjDzVFnAClCYQV/oNxCNGFaFF2mh/gzXG1TLmN7B8zGDg==
=7oVh
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"A bit late... I got sidetracked by back-from-vacation routines and
conferences. But most of these patches are already a few weeks old and
things look more calm on the mailing list than what this pull request
would suggest.
x86:
- missing TLB flush
- nested virtualization fixes for SMM (secure boot on nested
hypervisor) and other nested SVM fixes
- syscall fuzzing fixes
- live migration fix for AMD SEV
- mirror VMs now work for SEV-ES too
- fixes for reset
- possible out-of-bounds access in IOAPIC emulation
- fix enlightened VMCS on Windows 2022
ARM:
- Add missing FORCE target when building the EL2 object
- Fix a PMU probe regression on some platforms
Generic:
- KCSAN fixes
selftests:
- random fixes, mostly for clang compilation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
selftests: KVM: Explicitly use movq to read xmm registers
selftests: KVM: Call ucall_init when setting up in rseq_test
KVM: Remove tlbs_dirty
KVM: X86: Synchronize the shadow pagetable before link it
KVM: X86: Fix missed remote tlb flush in rmap_write_protect()
KVM: x86: nSVM: don't copy virt_ext from vmcb12
KVM: x86: nSVM: test eax for 4K alignment for GP errata workaround
KVM: x86: selftests: test simultaneous uses of V_IRQ from L1 and L0
KVM: x86: nSVM: restore int_vector in svm_clear_vintr
kvm: x86: Add AMD PMU MSRs to msrs_to_save_all[]
KVM: x86: nVMX: re-evaluate emulation_required on nested VM exit
KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if !from_vmentry
KVM: x86: VMX: synthesize invalid VM exit when emulating invalid guest state
KVM: x86: nSVM: refactor svm_leave_smm and smm_enter_smm
KVM: x86: SVM: call KVM_REQ_GET_NESTED_STATE_PAGES on exit from SMM mode
KVM: x86: reset pdptrs_from_userspace when exiting smm
KVM: x86: nSVM: restore the L1 host state prior to resuming nested guest on SMM exit
KVM: nVMX: Filter out all unsupported controls when eVMCS was activated
KVM: KVM: Use cpumask_available() to check for NULL cpumask when kicking vCPUs
KVM: Clean up benign vcpu->cpu data races when kicking vCPUs
...
The core functions of string.c are those that may be implemented by
per-architecture functions, or overloaded by FORTIFY_SOURCE. As a
result, it needs to be built with __NO_FORTIFY. Without this, macros
will collide with function declarations. This was accidentally working
due to -ffreestanding (on some architectures). Make this deterministic
by explicitly setting __NO_FORTIFY and move all the helper functions
into string_helpers.c so that they gain the fortification coverage they
had been missing.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Andy Lavr <andy.lavr@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Current release - regressions:
- dsa: bcm_sf2: fix array overrun in bcm_sf2_num_active_ports()
Previous releases - regressions:
- introduce a shutdown method to mdio device drivers, and make DSA
switch drivers compatible with masters disappearing on shutdown;
preventing infinite reference wait
- fix issues in mdiobus users related to ->shutdown vs ->remove
- virtio-net: fix pages leaking when building skb in big mode
- xen-netback: correct success/error reporting for the SKB-with-fraglist
- dsa: tear down devlink port regions when tearing down the devlink
port on error
- nexthop: fix division by zero while replacing a resilient group
- hns3: check queue, vf, vlan ids range before using
Previous releases - always broken:
- napi: fix race against netpoll causing NAPI getting stuck
- mlx4_en: ensure link operstate is updated even if link comes up
before netdev registration
- bnxt_en: fix TX timeout when TX ring size is set to the smallest
- enetc: fix illegal access when reading affinity_hint;
prevent oops on sysfs access
- mtk_eth_soc: avoid creating duplicate offload entries
Misc:
- core: correct the sock::sk_lock.owned lockdep annotations
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmFMr4MACgkQMUZtbf5S
Irv6Ag/+Ml4q6/IVO0jBppztZO1RrSalb3YE9JjPQyMchauVcdcADNpYF+Jo/gcH
4q+/Oikfp6gkQpJTFd0Y9X7UhwA4Jm4wWtEisqc6PJeHOagDZmVUn353WtgpnCNL
CgYBfa5k3msGudkqgeXIyiP/2sekBevTy+fOptubLZClyBrEwNUUUZBlpT9aI9Sj
ru1eMYklfcxP60AQgNhqq6ZwJnRELgN75fSR6ypVCGcRnTK4UGL/b6TvnPYn8uYY
zeNuMZZzYZK5B73tC6rWpteHWZ7VW3Km0WvIKs+ORM8nYchz/EprKZ0HCLPYrWvf
ib5Wi7HyL7/n9k9NUTCGrQY3tkOWNzXOepjpiBZPqCG9r2hc3JSR7Q2lFwL+gKv/
sh2y+T2xfp0WFGmG2XiU2MgnkypMSKah1sC/XRE7YLw02vPAnWQxxl/KVNek4j7M
CH/Tg9ErVKDRLN7KO/kKl3s8I8N4hdctms/YUt9QD5J9Rw/Jqwr/79bq1uLy6d4o
//ipmCTHex57Nvy80PtgcuKJhoeqGwR/Av6BvBMRZ1SOYs/C6q45skHTlYyiNY3+
Dyj9+nfrhsyE835GKPe8lqBFZONBXpXw+EUNXeYRiv0Pcd+JKek07bbajSQVSpd8
8nqQwylpGII0iPGyOc9wKajzh7O5W2odFIdOwtY/5yVjrcFgBd0=
=VcL3
-----END PGP SIGNATURE-----
Merge tag 'net-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Current release - regressions:
- dsa: bcm_sf2: fix array overrun in bcm_sf2_num_active_ports()
Previous releases - regressions:
- introduce a shutdown method to mdio device drivers, and make DSA
switch drivers compatible with masters disappearing on shutdown;
preventing infinite reference wait
- fix issues in mdiobus users related to ->shutdown vs ->remove
- virtio-net: fix pages leaking when building skb in big mode
- xen-netback: correct success/error reporting for the
SKB-with-fraglist
- dsa: tear down devlink port regions when tearing down the devlink
port on error
- nexthop: fix division by zero while replacing a resilient group
- hns3: check queue, vf, vlan ids range before using
Previous releases - always broken:
- napi: fix race against netpoll causing NAPI getting stuck
- mlx4_en: ensure link operstate is updated even if link comes up
before netdev registration
- bnxt_en: fix TX timeout when TX ring size is set to the smallest
- enetc: fix illegal access when reading affinity_hint; prevent oops
on sysfs access
- mtk_eth_soc: avoid creating duplicate offload entries
Misc:
- core: correct the sock::sk_lock.owned lockdep annotations"
* tag 'net-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
atlantic: Fix issue in the pm resume flow.
net/mlx4_en: Don't allow aRFS for encapsulated packets
net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled
net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries
nfc: st-nci: Add SPI ID matching DT compatible
MAINTAINERS: remove Guvenc Gulce as net/smc maintainer
nexthop: Fix memory leaks in nexthop notification chain listeners
mptcp: ensure tx skbs always have the MPTCP ext
qed: rdma - don't wait for resources under hw error recovery flow
s390/qeth: fix deadlock during failing recovery
s390/qeth: Fix deadlock in remove_discipline
s390/qeth: fix NULL deref in qeth_clear_working_pool_list()
net: dsa: realtek: register the MDIO bus under devres
net: dsa: don't allocate the slave_mii_bus using devres
Doc: networking: Fox a typo in ice.rst
net: dsa: fix dsa_tree_setup error path
net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work
net/smc: add missing error check in smc_clc_prfx_set()
net: hns3: fix a return value error in hclge_get_reset_status()
net: hns3: check vlan id before using it
...
Read vcpu->vcpu_idx directly instead of bouncing through the one-line
wrapper, kvm_vcpu_get_idx(), and drop the wrapper. The wrapper is a
remnant of the original implementation and serves no purpose; remove it
before it gains more users.
Back when kvm_vcpu_get_idx() was added by commit 497d72d80a ("KVM: Add
kvm_vcpu_get_idx to get vcpu index in kvm->vcpus"), the implementation
was more than just a simple wrapper as vcpu->vcpu_idx did not exist and
retrieving the index meant walking over the vCPU array to find the given
vCPU.
When vcpu_idx was introduced by commit 8750e72a79 ("KVM: remember
position in kvm->vcpus array"), the helper was left behind, likely to
avoid extra thrash (but even then there were only two users, the original
arm usage having been removed at some point in the past).
No functional change intended.
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210910183220.2397812-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 0b9902c1fc ("s390/qeth: fix deadlock during recovery") removed
taking discipline_mutex inside qeth_do_reset(), fixing potential
deadlocks. An error path was missed though, that still takes
discipline_mutex and thus has the original deadlock potential.
Intermittent deadlocks were seen when a qeth channel path is configured
offline, causing a race between qeth_do_reset and ccwgroup_remove.
Call qeth_set_offline() directly in the qeth_do_reset() error case and
then a new variant of ccwgroup_set_offline(), without taking
discipline_mutex.
Fixes: b41b554c1e ("s390/qeth: fix locking for discipline setup / removal")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The general convention for pcibios_* hooks is that they're named after the
corresponding pci_* function they provide a hook for. The exception is
pcibios_add_device() which provides a hook for pci_device_add().
Rename pcibios_add_device() to pcibios_device_add() so it matches
pci_device_add().
Also, remove the export of the microblaze version. The only caller must be
compiled as a built-in so there's no reason for the export.
Link: https://lore.kernel.org/r/20210913152709.48013-1-oohall@gmail.com
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> # s390
These issues can be used by an unprivileged local user to circumvent the verifier and gain root privileges.
v4.1+
s390/bpf: Fix optimizing out zero-extensions
s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant
v5.5+
s390/bpf: Fix branch shortening during codegen pass
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmFDDAoACgkQjYWKoQLX
FBiK/ggAi9LxNSrxNI4u83PY/ubZ+13XIkB59BtvShHnzSSw/e0Sdbr7dnedljaF
qWv9MUF9s1P88DRlXw/gHIckvIH77uvT28i5Omg6JfUnBLB0LaVC4QiwhmfbqBbV
psew9zV1z0/2YFvagCsc/XdF4QdlyLm3GKO/bEAeFXG/jDigkzBVB3clffIv7zm7
mD4uXgELil8PNv9tliRonUwoGG5P+0tF7KviTxi3aU7NLXtZxJ1Qt0N+HjRaDpwR
kxvSaukn61yWafUWlgbmGL8HGqhFqCk4SQzHSAZ8m87dl6KjxDiQUjvccn5xQPF2
M7JQU7INFApvK2QZFgW66jnTeqvUcQ==
=Qmcn
-----END PGP SIGNATURE-----
Merge tag 's390-5.15-ebpf-jit-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 eBPF fixes from Vasily Gorbik:
"Johan Almbladh has implemented a number of new testcases for eBPF [1],
which uncovered three miscompilation issues in the s390 eBPF JIT"
Link: https://lore.kernel.org/bpf/20210902185229.1840281-1-johan.almbladh@anyfinetworks.com/ [1]
* tag 's390-5.15-ebpf-jit-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/bpf: Fix optimizing out zero-extensions
s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant
s390/bpf: Fix branch shortening during codegen pass
Currently the JIT completely removes things like `reg32 += 0`,
however, the BPF_ALU semantics requires the target register to be
zero-extended in such cases.
Fix by optimizing out only the arithmetic operation, but not the
subsequent zero-extension.
Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Fixes: 0546231057 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The JIT uses agfi for subtracting constants, but -(-0x80000000) cannot
be represented as a 32-bit signed binary integer. Fix by using algfi in
this particular case.
Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Fixes: 0546231057 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
EMIT6_PCREL() macro assumes that the previous pass generated 6 bytes
of code, which is not the case if branch shortening took place. Fix by
using jit->prg, like all the other EMIT6_PCREL_*() macros.
Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Fixes: 4e9b4a6883 ("s390/bpf: Use relative long branches")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
s390 is the only architecture which allows to set the
-mwarn-dynamicstack compile option. This however will also always
generate a warning with system call stack randomization, which uses
alloca to generate some random sized stack frame.
On the other hand Linus just enabled "-Werror" by default with commit
3fe617ccaf ("Enable '-Werror' by default for all kernel builds"),
which means compiles will always fail by default.
So instead of playing once again whack-a-mole for something which is
s390 specific, simply remove this option.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
We should not walk/touch page tables outside of VMA boundaries when
holding only the mmap sem in read mode. Evil user space can modify the
VMA layout just before this function runs and e.g., trigger races with
page table removal code since commit dd2283f260 ("mm: mmap: zap pages
with read mmap_sem in munmap").
find_vma() does not check if the address is >= the VMA start address;
use vma_lookup() instead.
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Fixes: dd2283f260 ("mm: mmap: zap pages with read mmap_sem in munmap")
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
- Fix topology update on cpu hotplug, so notifiers see expected masks. This bug
was uncovered with SCHED_CORE support.
- Fix stack unwinding so that the correct number of entries are omitted like
expected by common code. This fixes KCSAN selftests.
- Add kmemleak annotation to stack_alloc to avoid false positive kmemleak
warnings.
- Avoid layering violation in common I/O code and don't unregister subchannel
from child-drivers.
- Remove xpram device driver for which no real use case exists since the kernel
is 64 bit only. Also all hypervisors got required support removed in the
meantime, which means the xpram device driver is dead code.
- Fix -ENODEV handling of clp_get_state in our PCI code.
- Enable KFENCE in debug defconfig.
- Cleanup hugetlbfs s390 specific Kconfig dependency.
- Quite a lot of trivial fixes to get rid of "W=1" warnings, and and other
simple cleanups.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmE56jEACgkQIg7DeRsp
bsI1sQ/+L91zvpjlWGEPjZhQmFJgDufuObLWJlhwOSPsOlezzJTujNscoisTe6Wm
hfS1I/GzGsgcY3695xgBLgkPS37nrDdDLAgM4CnajOOalEZjbHgH5gcPiCPHfPAD
QkvVFv2PjCQnaPx81kEIeK6tMFkvi6IRhfwhtGTf1fwoKDyw4IQT1couBsiuAy3n
28/7NqMidS4gbv5X/BLK1Ez4as9d3PoecNre1debRPOZcdxIjCVDy7OW5MotI3ol
ENsOHtNJe/orIDCc+QbsEP2xZJZdbZ0D0Zr/RQ4KEue42wKtGLzp/ZuG+UfTPyyx
vlEDgMRgPHAGnceEImcMwK0XQwOn05sm13jOkbmpIwhmiE46rksAPf3cGL4DjlBP
3rznDXoLYELX2OAHz2G4jfbrqFWDxbh5rp1NMr8tELvJV5xbdsMC11QFQY28swod
/sUE39fX+zynwHSSttq0PXtKX4gr/d5ZMDdlhjl7lxlOgwEwDodBL3/xL81+C0qx
jkQWDsJ6OpZ7iJpGvxaCUhFjlgihdi2InZ942inRGo/A/EaM6/7diExLiyqfaab5
WEQ2BOlITUey85Fiu2WxeeweRChUwu+XNQt+Nx4hDF454K51htU/GJCUBW5Z5qtN
Dm+/DolXkPY+joR7xBLHNzivob3ShcsoFiZjoBpTc/Hd18dhSQg=
=fpJz
-----END PGP SIGNATURE-----
Merge tag 's390-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
"Except for the xpram device driver removal it is all about fixes and
cleanups.
- Fix topology update on cpu hotplug, so notifiers see expected
masks. This bug was uncovered with SCHED_CORE support.
- Fix stack unwinding so that the correct number of entries are
omitted like expected by common code. This fixes KCSAN selftests.
- Add kmemleak annotation to stack_alloc to avoid false positive
kmemleak warnings.
- Avoid layering violation in common I/O code and don't unregister
subchannel from child-drivers.
- Remove xpram device driver for which no real use case exists since
the kernel is 64 bit only. Also all hypervisors got required
support removed in the meantime, which means the xpram device
driver is dead code.
- Fix -ENODEV handling of clp_get_state in our PCI code.
- Enable KFENCE in debug defconfig.
- Cleanup hugetlbfs s390 specific Kconfig dependency.
- Quite a lot of trivial fixes to get rid of "W=1" warnings, and and
other simple cleanups"
* tag 's390-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
hugetlbfs: s390 is always 64bit
s390/ftrace: remove incorrect __va usage
s390/zcrypt: remove incorrect kernel doc indicators
scsi: zfcp: fix kernel doc comments
s390/sclp: add __nonstring annotation
s390/hmcdrv_ftp: fix kernel doc comment
s390: remove xpram device driver
s390/pci: read clp_list_pci_req only once
s390/pci: fix clp_get_state() handling of -ENODEV
s390/cio: fix kernel doc comment
s390/ctrlchar: fix kernel doc comment
s390/con3270: use proper type for tasklet function
s390/cpum_cf: move array from header to C file
s390/mm: fix kernel doc comments
s390/topology: fix topology information when calling cpu hotplug notifiers
s390/unwind: use current_frame_address() to unwind current task
s390/configs: enable CONFIG_KFENCE in debug_defconfig
s390/entry: make oklabel within CHKSTG macro local
s390: add kmemleak annotation in stack_alloc()
s390/cio: dont unregister subchannel from child-drivers
All users of compat_alloc_user_space() and copy_in_user() have been
removed from the kernel, only a few functions in sparc remain that can be
changed to calling arch_copy_in_user() instead.
Link: https://lkml.kernel.org/r/20210727144859.4150043-7-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These are all handled correctly when calling the native system call entry
point, so remove the special cases.
Link: https://lkml.kernel.org/r/20210727144859.4150043-6-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
No need to check for 64BIT. While at it, let's just select
ARCH_SUPPORTS_HUGETLBFS from arch/s390/Kconfig.
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20210908154506.20764-1-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The address of ftrace_graph_caller is already virtual.
Using __va() to translate the address is wrong.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
s390:
- enable interpretation of specification exceptions
- fix a vcpu_idx vs vcpu_id mixup
x86:
- fast (lockless) page fault support for the new MMU
- new MMU now the default
- increased maximum allowed VCPU count
- allow inhibit IRQs on KVM_RUN while debugging guests
- let Hyper-V-enabled guests run with virtualized LAPIC as long as they
do not enable the Hyper-V "AutoEOI" feature
- fixes and optimizations for the toggling of AMD AVIC (virtualized LAPIC)
- tuning for the case when two-dimensional paging (EPT/NPT) is disabled
- bugfixes and cleanups, especially with respect to 1) vCPU reset and
2) choosing a paging mode based on CR0/CR4/EFER
- support for 5-level page table on AMD processors
Generic:
- MMU notifier invalidation callbacks do not take mmu_lock unless necessary
- improved caching of LRU kvm_memory_slot
- support for histogram statistics
- add statistics for halt polling and remote TLB flush requests
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmE2CIAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMyqwf+Ky2WoThuQ9Ra0r/m8pUTAx5+gsAf
MmG24rNLE+26X0xuBT9Q5+etYYRLrRTWJvo5cgHooz7muAYW6scR+ho5xzvLTAxi
DAuoijkXsSdGoFCp0OMUHiwG3cgY5N7feTEwLPAb2i6xr/l6SZyCP4zcwiiQbJ2s
UUD0i3rEoNQ02/hOEveud/ENxzUli9cmmgHKXR3kNgsJClSf1fcuLnhg+7EGMhK9
+c2V+hde5y0gmEairQWm22MLMRolNZ5NL4kjykiNh2M5q9YvbHe5+f/JmENlNZMT
bsUQT6Ry1ukuJ0V59rZvUw71KknPFzZ3d6HgW4pwytMq6EJKiISHzRbVnQ==
=FCAB
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual
PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
s390:
- enable interpretation of specification exceptions
- fix a vcpu_idx vs vcpu_id mixup
x86:
- fast (lockless) page fault support for the new MMU
- new MMU now the default
- increased maximum allowed VCPU count
- allow inhibit IRQs on KVM_RUN while debugging guests
- let Hyper-V-enabled guests run with virtualized LAPIC as long as
they do not enable the Hyper-V "AutoEOI" feature
- fixes and optimizations for the toggling of AMD AVIC (virtualized
LAPIC)
- tuning for the case when two-dimensional paging (EPT/NPT) is
disabled
- bugfixes and cleanups, especially with respect to vCPU reset and
choosing a paging mode based on CR0/CR4/EFER
- support for 5-level page table on AMD processors
Generic:
- MMU notifier invalidation callbacks do not take mmu_lock unless
necessary
- improved caching of LRU kvm_memory_slot
- support for histogram statistics
- add statistics for halt polling and remote TLB flush requests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (210 commits)
KVM: Drop unused kvm_dirty_gfn_invalid()
KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted
KVM: MMU: mark role_regs and role accessors as maybe unused
KVM: MIPS: Remove a "set but not used" variable
x86/kvm: Don't enable IRQ when IRQ enabled in kvm_wait
KVM: stats: Add VM stat for remote tlb flush requests
KVM: Remove unnecessary export of kvm_{inc,dec}_notifier_count()
KVM: x86/mmu: Move lpage_disallowed_link further "down" in kvm_mmu_page
KVM: x86/mmu: Relocate kvm_mmu_page.tdp_mmu_page for better cache locality
Revert "KVM: x86: mmu: Add guest physical address check in translate_gpa()"
KVM: x86/mmu: Remove unused field mmio_cached in struct kvm_mmu_page
kvm: x86: Increase KVM_SOFT_MAX_VCPUS to 710
kvm: x86: Increase MAX_VCPUS to 1024
kvm: x86: Set KVM_MAX_VCPU_ID to 4*KVM_MAX_VCPUS
KVM: VMX: avoid running vmx_handle_exit_irqoff in case of emulation
KVM: x86/mmu: Don't freak out if pml5_root is NULL on 4-level host
KVM: s390: index kvm->arch.idle_mask by vcpu_idx
KVM: s390: Enable specification exception interpretation
KVM: arm64: Trim guest debug exception handling
KVM: SVM: Add 5-level page table support for SVM
...
This reverts commit 9857a17f20.
That commit was completely broken, and I should have caught on to it
earlier. But happily, the kernel test robot noticed the breakage fairly
quickly.
The breakage is because "try_get_page()" is about avoiding the page
reference count overflow case, but is otherwise the exact same as a
plain "get_page()".
In contrast, "try_get_compound_head()" is an entirely different beast,
and uses __page_cache_add_speculative() because it's not just about the
page reference count, but also about possibly racing with the underlying
page going away.
So all the commentary about how
"try_get_page() has fallen a little behind in terms of maintenance,
try_get_compound_head() handles speculative page references more
thoroughly"
was just completely wrong: yes, try_get_compound_head() handles
speculative page references, but the point is that try_get_page() does
not, and must not.
So there's no lack of maintainance - there are fundamentally different
semantics.
A speculative page reference would be entirely wrong in "get_page()",
and it's entirely wrong in "try_get_page()". It's not about
speculation, it's purely about "uhhuh, you can't get this page because
you've tried to increment the reference count too much already".
The reason the kernel test robot noticed this bug was that it hit the
VM_BUG_ON() in __page_cache_add_speculative(), which is all about
verifying that the context of any speculative page access is correct.
But since that isn't what try_get_page() is all about, the VM_BUG_ON()
tests things that are not correct to test for try_get_page().
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Support for expanded storage was only available until z13 and z/VM 6.3
respectively. However there haven't been any use cases a long time
before for this device driver.
Therefore remove it.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
We do not have to reset the fh_list in the loop.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
With commit cc049eecfb ("s390/pci: simplify CLP List PCI handling")
clp_get_state() was changed to make use of the new clp_find_pci() helper
function to query a specific function. This however returns -ENODEV when
the device is not found at all and this error was passed to the caller.
It was missed however that the callers actually expect a success return
from clp_get_state() if the device is gone.
Fix this by handling the -ENODEV return of clp_find_pci() explicitly in
clp_get_state() returning success and setting the state parameter to
ZPCI_FN_STATE_RESERVED matching the design concept that a PCI function
that disappeared must have been resverved elsewhere. For all other error
returns continue to just pass them on to the caller.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Fixes: cc049eecfb ("s390/pci: simplify CLP List PCI handling")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Move array from header to C file to avoid that it gets defined in
every C file where the header is included:
In file included from arch/s390/kernel/perf_cpum_cf_common.c:19:
./arch/s390/include/asm/cpu_mcf.h:27:18: warning: ‘cpumf_ctr_ctl’ defined but not used [-Wunused-const-variable=]
27 | static const u64 cpumf_ctr_ctl[CPUMF_CTR_SET_MAX] = {
| ^~~~~~~~~~~~~
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The cpu hotplug notifiers are called without updating the core/thread
masks when a new CPU is added. This causes problems with code setting
up data structures in a cpu hotplug notifier, and relying on that later
in normal code.
This caused a crash in the new core scheduling code (SCHED_CORE),
where rq->core was set up in a notifier depending on cpu masks.
To fix this, add a cpu_setup_mask which is used in update_cpu_masks()
instead of the cpu_online_mask to determine whether the cpu masks should
be set for a certain cpu. Also move update_cpu_masks() to update the
masks before calling notify_cpu_starting() so that the notifiers are
seeing the updated masks.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Cc: <stable@vger.kernel.org>
[hca@linux.ibm.com: get rid of cpu_online_mask handling]
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
current_stack_pointer() simply returns current value of %r15. If
current_stack_pointer() caller allocates stack (which is the case in
unwind code) %r15 points to a stack frame allocated for callees, meaning
current_stack_pointer() caller (e.g. stack_trace_save) will end up in
the stacktrace. This is not expected by stack_trace_save*() callers and
causes problems.
current_frame_address() on the other hand returns function stack frame
address, which matches %r15 upon function invocation. Using it in
get_stack_pointer() makes it more aligned with x86 implementation
(according to BACKTRACE_SELF_TEST output) and meets stack_trace_save*()
caller's expectations, notably KCSAN.
Also make sure unwind_start is always inlined.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Marco Elver <elver@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/patch.git-04dd26be3043.your-ad-here.call-01630504868-ext-6188@work.hours
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
-----BEGIN PGP SIGNATURE-----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=LuHM
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.15
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
- Simplifying the Kconfig use of FTRACE and TRACE_IRQFLAGS_SUPPORT
- bootconfig now can start histograms
- bootconfig supports group/all enabling
- histograms now can put values in linear size buckets
- execnames can be passed to synthetic events
- Introduction of "event probes" that attach to other events and
can retrieve data from pointers of fields, or record fields
as different types (a pointer to a string as a string instead
of just a hex number)
- Various fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYTJDixQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnPLAP9XviWrZD27uFj6LU/Vp2umbq8la1aC
oW8o9itUGpLoHQD+OtsMpQXsWrxoNw/JD1OWCH4J0YN+TnZAUUG2E9e0twA=
=OZXG
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- simplify the Kconfig use of FTRACE and TRACE_IRQFLAGS_SUPPORT
- bootconfig can now start histograms
- bootconfig supports group/all enabling
- histograms now can put values in linear size buckets
- execnames can be passed to synthetic events
- introduce "event probes" that attach to other events and can retrieve
data from pointers of fields, or record fields as different types (a
pointer to a string as a string instead of just a hex number)
- various fixes and clean ups
* tag 'trace-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (35 commits)
tracing/doc: Fix table format in histogram code
selftests/ftrace: Add selftest for testing duplicate eprobes and kprobes
selftests/ftrace: Add selftest for testing eprobe events on synthetic events
selftests/ftrace: Add test case to test adding and removing of event probe
selftests/ftrace: Fix requirement check of README file
selftests/ftrace: Add clear_dynamic_events() to test cases
tracing: Add a probe that attaches to trace events
tracing/probes: Reject events which have the same name of existing one
tracing/probes: Have process_fetch_insn() take a void * instead of pt_regs
tracing/probe: Change traceprobe_set_print_fmt() to take a type
tracing/probes: Use struct_size() instead of defining custom macros
tracing/probes: Allow for dot delimiter as well as slash for system names
tracing/probe: Have traceprobe_parse_probe_arg() take a const arg
tracing: Have dynamic events have a ref counter
tracing: Add DYNAMIC flag for dynamic events
tracing: Replace deprecated CPU-hotplug functions.
MAINTAINERS: Add an entry for os noise/latency
tracepoint: Fix kerneldoc comments
bootconfig/tracing/ktest: Update ktest example for boot-time tracing
tools/bootconfig: Use per-group/all enable option in ftrace2bconf script
...
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmExXHoVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGAZwP/iHdEZzuQ4cz2uXUaV0fevj9jjPU
zJ8wrrNabAiT6f5x861DsARQSR4OSt3zN0tyBNgZwUdotbe7ED5GegrgIUBMWlML
QskhTEIZj7TexAX/20vx671gtzI3JzFg4c9BuriXCFRBvychSevdJPr65gMDOesL
vOJnXe+SGXG2+fPWi/PxrcOItNRcveqo2GiWHT3g0Cv/DJUulu81gEkz3hrufnMR
cjMeSkV0nJJcvI755OQBOUnEuigW64k4m2WxHPG24tU8cQOCqV6lqwOfNQBAn4+F
OoaCMyPQT9gvGYwGExQMCXGg0wbUt1qnxzOVoA2qFCwbo+MFhqjBvPXab6VJm7CE
mY3RrTtvxSqBdHI6EGcYeLjhycK9b+LLoJ1qc3S9FK8It6NoFFp4XV0R6ItPBls7
mWi9VSpyI6k0AwLq+bGXEHvaX/bnnf/vfqn8H+w6mRZdXjFV8EB2DiOSRX/OqjVG
RnvTtXzWWThLyXvWR3Jox4+7X6728oL7akLemoeZI6oTbJDm7dQgwpz5HbSyHXLh
d+gUF3Y/6lqxT5N9GSVDxpD1bEMh2I7nGQ4M7WGbGas/3yUemF8wbBqGQo4a+YeD
d9vGAUxDp2PQTtL2sjFo5Gd4PZEM9g7vwWzRvHe0o5NxKEXcBg25b8cD1hxrN9Y4
Y1AAnc0kLO+My3PC
=lw3M
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kbuild: redo fake deps at include/ksym/*.h
kbuild: clean up objtool_args slightly
modpost: get the *.mod file path more simply
checkkconfigsymbols.py: Fix the '--ignore' option
kbuild: merge vmlinux_link() between ARCH=um and other architectures
kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
kbuild: remove stale *.symversions
kbuild: remove unused quiet_cmd_update_lto_symversions
gen_compile_commands: extract compiler command from a series of commands
x86: remove cc-option-yn test for -mtune=
arc: replace cc-option-yn uses with cc-option
s390: replace cc-option-yn uses with cc-option
ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
sparc: move the install rule to arch/sparc/Makefile
security: remove unneeded subdir-$(CONFIG_...)
kbuild: sh: remove unused install script
kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
kbuild: Switch to 'f' variants of integrated assembler flag
kbuild: Shuffle blank line to improve comment meaning
...
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"A new feature called restricted DMA pools. It allows SWIOTLB to
utilize per-device (or per-platform) allocated memory pools instead of
using the global one.
The first big user of this is ARM Confidential Computing where the
memory for DMA operations can be set per platform"
* 'stable/for-linus-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: (23 commits)
swiotlb: use depends on for DMA_RESTRICTED_POOL
of: restricted dma: Don't fail device probe on rmem init failure
of: Move of_dma_set_restricted_buffer() into device.c
powerpc/svm: Don't issue ultracalls if !mem_encrypt_active()
s390/pv: fix the forcing of the swiotlb
swiotlb: Free tbl memory in swiotlb_exit()
swiotlb: Emit diagnostic in swiotlb_exit()
swiotlb: Convert io_default_tlb_mem to static allocation
of: Return success from of_dma_set_restricted_buffer() when !OF_ADDRESS
swiotlb: add overflow checks to swiotlb_bounce
swiotlb: fix implicit debugfs declarations
of: Add plumbing for restricted DMA pool
dt-bindings: of: Add restricted DMA pool
swiotlb: Add restricted DMA pool initialization
swiotlb: Add restricted DMA alloc/free support
swiotlb: Refactor swiotlb_tbl_unmap_single
swiotlb: Move alloc_size to swiotlb_find_slots
swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
swiotlb: Update is_swiotlb_active to add a struct device argument
swiotlb: Update is_swiotlb_buffer to add a struct device argument
...
Merge misc updates from Andrew Morton:
"173 patches.
Subsystems affected by this series: ia64, ocfs2, block, and mm (debug,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure,
hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock,
oom-kill, migration, ksm, percpu, vmstat, and madvise)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits)
mm/madvise: add MADV_WILLNEED to process_madvise()
mm/vmstat: remove unneeded return value
mm/vmstat: simplify the array size calculation
mm/vmstat: correct some wrong comments
mm/percpu,c: remove obsolete comments of pcpu_chunk_populated()
selftests: vm: add COW time test for KSM pages
selftests: vm: add KSM merging time test
mm: KSM: fix data type
selftests: vm: add KSM merging across nodes test
selftests: vm: add KSM zero page merging test
selftests: vm: add KSM unmerge test
selftests: vm: add KSM merge test
mm/migrate: correct kernel-doc notation
mm: wire up syscall process_mrelease
mm: introduce process_mrelease system call
memblock: make memblock_find_in_range method private
mm/mempolicy.c: use in_task() in mempolicy_slab_node()
mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies
mm/mempolicy: advertise new MPOL_PREFERRED_MANY
mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY
...
Split off from prev patch in the series that implements the syscall.
Link: https://lkml.kernel.org/r/20210809185259.405936-2-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jan Engelhardt <jengelh@inai.de>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tim Murray <timmurray@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are a lot of uses of memblock_find_in_range() along with
memblock_reserve() from the times memblock allocation APIs did not exist.
memblock_find_in_range() is the very core of memblock allocations, so any
future changes to its internal behaviour would mandate updates of all the
users outside memblock.
Replace the calls to memblock_find_in_range() with an equivalent calls to
memblock_phys_alloc() and memblock_phys_alloc_range() and make
memblock_find_in_range() private method of memblock.
This simplifies the callers, ensures that (unlikely) errors in
memblock_reserve() are handled and improves maintainability of
memblock_find_in_range().
Link: https://lkml.kernel.org/r/20210816122622.30279-1-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Kirill A. Shutemov <kirill.shtuemov@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [ACPI]
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Nick Kossifidis <mick@ics.forth.gr> [riscv]
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
try_get_page() is very similar to try_get_compound_head(), and in fact
try_get_page() has fallen a little behind in terms of maintenance:
try_get_compound_head() handles speculative page references more
thoroughly.
There are only two try_get_page() callsites, so just call
try_get_compound_head() directly from those, and remove try_get_page()
entirely.
Also, seeing as how this changes try_get_compound_head() into a non-static
function, provide some kerneldoc documentation for it.
Link: https://lkml.kernel.org/r/20210813044133.1536842-4-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix dma-valid return WAITED implementation (Anthony Yznaga)
- SPDX license cleanups (Cai Huoqing)
- Split vfio-pci-core from vfio-pci and enhance PCI driver matching
to support future vendor provided vfio-pci variants (Yishai Hadas,
Max Gurtovoy, Jason Gunthorpe)
- Replace duplicated reflck with core support for managing first
open, last close, and device sets (Jason Gunthorpe, Max Gurtovoy,
Yishai Hadas)
- Fix non-modular mdev support and don't nag about request callback
support (Christoph Hellwig)
- Add semaphore to protect instruction intercept handler and replace
open-coded locks in vfio-ap driver (Tony Krowiak)
- Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe)
-----BEGIN PGP SIGNATURE-----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=nzK7
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Fix dma-valid return WAITED implementation (Anthony Yznaga)
- SPDX license cleanups (Cai Huoqing)
- Split vfio-pci-core from vfio-pci and enhance PCI driver matching to
support future vendor provided vfio-pci variants (Yishai Hadas, Max
Gurtovoy, Jason Gunthorpe)
- Replace duplicated reflck with core support for managing first open,
last close, and device sets (Jason Gunthorpe, Max Gurtovoy, Yishai
Hadas)
- Fix non-modular mdev support and don't nag about request callback
support (Christoph Hellwig)
- Add semaphore to protect instruction intercept handler and replace
open-coded locks in vfio-ap driver (Tony Krowiak)
- Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe)
* tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio: (37 commits)
vfio/pci: Introduce vfio_pci_core.ko
vfio: Use kconfig if XX/endif blocks instead of repeating 'depends on'
vfio: Use select for eventfd
PCI / VFIO: Add 'override_only' support for VFIO PCI sub system
PCI: Add 'override_only' field to struct pci_device_id
vfio/pci: Move module parameters to vfio_pci.c
vfio/pci: Move igd initialization to vfio_pci.c
vfio/pci: Split the pci_driver code out of vfio_pci_core.c
vfio/pci: Include vfio header in vfio_pci_core.h
vfio/pci: Rename ops functions to fit core namings
vfio/pci: Rename vfio_pci_device to vfio_pci_core_device
vfio/pci: Rename vfio_pci_private.h to vfio_pci_core.h
vfio/pci: Rename vfio_pci.c to vfio_pci_core.c
vfio/ap_ops: Convert to use vfio_register_group_dev()
s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification
s390/vfio-ap: r/w lock for PQAP interception handler function pointer
vfio/type1: Fix vfio_find_dma_valid return
vfio-pci/zdev: Remove repeated verbose license text
vfio: platform: reset: Convert to SPDX identifier
vfio: Remove struct vfio_device_ops open/release
...
- fix debugfs initialization order (Anthony Iliopoulos)
- use memory_intersects() directly (Kefeng Wang)
- allow to return specific errors from ->map_sg
(Logan Gunthorpe, Martin Oliveira)
- turn the dma_map_sg return value into an unsigned int (me)
- provide a common global coherent pool іmplementation (me)
-----BEGIN PGP SIGNATURE-----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=spje
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.15' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- fix debugfs initialization order (Anthony Iliopoulos)
- use memory_intersects() directly (Kefeng Wang)
- allow to return specific errors from ->map_sg (Logan Gunthorpe,
Martin Oliveira)
- turn the dma_map_sg return value into an unsigned int (me)
- provide a common global coherent pool іmplementation (me)
* tag 'dma-mapping-5.15' of git://git.infradead.org/users/hch/dma-mapping: (31 commits)
hexagon: use the generic global coherent pool
dma-mapping: make the global coherent pool conditional
dma-mapping: add a dma_init_global_coherent helper
dma-mapping: simplify dma_init_coherent_memory
dma-mapping: allow using the global coherent pool for !ARM
ARM/nommu: use the generic dma-direct code for non-coherent devices
dma-direct: add support for dma_coherent_default_memory
dma-mapping: return an unsigned int from dma_map_sg{,_attrs}
dma-mapping: disallow .map_sg operations from returning zero on error
dma-mapping: return error code from dma_dummy_map_sg()
x86/amd_gart: don't set failed sg dma_address to DMA_MAPPING_ERROR
x86/amd_gart: return error code from gart_map_sg()
xen: swiotlb: return error code from xen_swiotlb_map_sg()
parisc: return error code from .map_sg() ops
sparc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR
sparc/iommu: return error codes from .map_sg() ops
s390/pci: don't set failed sg dma_address to DMA_MAPPING_ERROR
s390/pci: return error code from s390_dma_map_sg()
powerpc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR
powerpc/iommu: return error code from .map_sg() ops
...
The main content for 5.15 is a series that cleans up the handling of
strncpy_from_user() and strnlen_user(), removing a lot of slightly
incorrect versions of these in favor of the lib/strn*.c helpers
that implement these correctly and more efficiently.
The only architectures that retain a private version now are
mips, ia64, um and parisc. I had offered to convert those at all,
but Thomas Bogendoerfer wanted to keep the mips version for the
moment until he had a chance to do regression testing.
The branch also contains two patches for bitops and for ffs().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=NB0a
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"The main content for 5.15 is a series that cleans up the handling of
strncpy_from_user() and strnlen_user(), removing a lot of slightly
incorrect versions of these in favor of the lib/strn*.c helpers that
implement these correctly and more efficiently.
The only architectures that retain a private version now are mips,
ia64, um and parisc. I had offered to convert those at all, but Thomas
Bogendoerfer wanted to keep the mips version for the moment until he
had a chance to do regression testing.
The branch also contains two patches for bitops and for ffs()"
* tag 'asm-generic-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
bitops/non-atomic: make @nr unsigned to avoid any DIV
asm-generic: ffs: Drop bogus reference to ffz location
asm-generic: reverse GENERIC_{STRNCPY_FROM,STRNLEN}_USER symbols
asm-generic: remove extra strn{cpy_from,len}_user declarations
asm-generic: uaccess: remove inline strncpy_from_user/strnlen_user
s390: use generic strncpy/strnlen from_user
microblaze: use generic strncpy/strnlen from_user
csky: use generic strncpy/strnlen from_user
arc: use generic strncpy/strnlen from_user
hexagon: use generic strncpy/strnlen from_user
h8300: remove stale strncpy_from_user
asm-generic/uaccess.h: remove __strncpy_from_user/__strnlen_user
Pull exit cleanups from Eric Biederman:
"In preparation of doing something about PTRACE_EVENT_EXIT I have
started cleaning up various pieces of code related to do_exit. Most of
that code I did not manage to get tested and reviewed before the merge
window opened but a handful of very useful cleanups are ready to be
merged.
The first change is simply the removal of the bdflush system call. The
code has now been disabled long enough that even the oldest userspace
working userspace setups anyone can find to test are fine with the
bdflush system call being removed.
Changing m68k fsp040_die to use force_sigsegv(SIGSEGV) instead of
calling do_exit directly is interesting only in that it is nearly the
most difficult of the incorrect uses of do_exit to remove.
The change to the seccomp code to simply send a signal instead of
calling do_coredump directly is a very nice little cleanup made
possible by realizing the existing signal sending helpers were missing
a little bit of functionality that is easy to provide"
* 'exit-cleanups-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal/seccomp: Dump core when there is only one live thread
signal/seccomp: Refactor seccomp signal and coredump generation
signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die
exit/bdflush: Remove the deprecated bdflush system call
Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did the
following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
The latter one will cause a tiny merge issue with your tree, as there
was a last-minute fix for this in 5.14 in your tree, but the fixup
should be "obvious". If you want me to provide a fixed merge for this,
please let me know.
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs
users at once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+FLQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXuACfWECnysDtXNe66DdETCFs1a1RToYAoMokWeU5
s8VFP1NY2BjmxJbkebLL
=8kVu
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read
out again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs
in kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by
the router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105)
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmEukBYACgkQMUZtbf5S
IrsyHA//TO8dw18NYts4n9LmlJT2naJ7yBUUSSXK/M+DtW0MQ9nnHhqzPm5uJdRl
IgQTNJrW3dYzRwgqaWZqEwO1t5/FI+f87ND1Nsekg7x9tF66a6ov5WxU26TwwSba
U+si/inQ/4chuQ+LxMQobqCDxaLE46I2dIoRl+YfndJ24DRzYSwAEYIPPbSdfyU+
+/l+3s4GaxO4k/hLciPAiOniyxLoUNiGUTNh+2yqRBXelSRJRKVnl+V22ANFrxRW
nTEiplfVKhlPU1e4iLuRtaxDDiePHhw9I3j/lMHhfeFU2P/gKJIvz4QpGV0CAZg2
1VvDU32WEx1GQLXJbKm0KwoNRUq1QSjOyyFti+BO7ugGaYAR4gKhShOqlSYLzUtB
tbtzQhSNLWOGqgmSJOztZb5kFDm2EdRSll5/lP2uyFlPkIsIp0QbscJVzNTnS74b
Xz15ZOw41Z4TfWPEMWgfrx6Zkm7pPWkly+7WfUkPcHa1gftNz6tzXXxSXcXIBPdi
yQ5JCzzxrM5573YHuk5YedwZpn6PiAt4A/muFGk9C6aXP60TQAOS/ppaUzZdnk4D
NfOk9mj06WEULjYjPcKEuT3GGWE6kmjb8Pu0QZWKOchv7vr6oZly1EkVZqYlXELP
AfhcrFeuufie8mqm0jdb4LnYaAnqyLzlb1J4Zxh9F+/IX7G3yoc=
=JDGD
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver"
* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...
Make the oklabel within the CHKSTG macro local. This makes sure that
tools like objdump and the crash debugging tool still disassemble full
functions where the macro has been used instead of stopping half way
where such a global label is used and one has to guess how to
disassemble the rest of such a function:
E.g.:
0000000000cb0270 <mcck_int_handler>:
cb0270: b2 05 03 20 stck 800
...
cb0354: a7 74 00 97 jne cb0482 <oklabel270+0xe2>
0000000000cb0358 <oklabel243>:
cb0358: c0 e0 00 22 4e 8f larl %r14,10fa076 <opcode+0x2558>
...
Fixes: d35925b349 ("s390/mcck: move storage error checks to assembler")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
kmemleak with enabled auto scanning reports that our stack allocation is
lost. This is because we're saving the pointer + STACK_INIT_OFFSET to
lowcore. When kmemleak now scans the objects, it thinks that this one is
lost because it can't find a corresponding pointer.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Core changes:
- The usual set of small fixes and improvements all over the place, but nothing
outstanding
MSI changes:
- Further consolidation of the PCI/MSI interrupt chip code
- Make MSI sysfs code independent of PCI/MSI and expose the MSI interrupts
of platform devices in the same way as PCI exposes them.
Driver changes:
- Support for ARM GICv3 EPPI partitions
- Treewide conversion to generic_handle_domain_irq() for all chained
interrupt controllers
- Conversion to bitmap_zalloc() throughout the irq chip drivers
- The usual set of small fixes and improvements
-----BEGIN PGP SIGNATURE-----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=qyll
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates to the interrupt core and driver subsystems:
Core changes:
- The usual set of small fixes and improvements all over the place,
but nothing stands out
MSI changes:
- Further consolidation of the PCI/MSI interrupt chip code
- Make MSI sysfs code independent of PCI/MSI and expose the MSI
interrupts of platform devices in the same way as PCI exposes them.
Driver changes:
- Support for ARM GICv3 EPPI partitions
- Treewide conversion to generic_handle_domain_irq() for all chained
interrupt controllers
- Conversion to bitmap_zalloc() throughout the irq chip drivers
- The usual set of small fixes and improvements"
* tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
platform-msi: Add ABI to show msi_irqs of platform devices
genirq/msi: Move MSI sysfs handling from PCI to MSI core
genirq/cpuhotplug: Demote debug printk to KERN_DEBUG
irqchip/qcom-pdc: Trim unused levels of the interrupt hierarchy
irqdomain: Export irq_domain_disconnect_hierarchy()
irqchip/gic-v3: Fix priority comparison when non-secure priorities are used
irqchip/apple-aic: Fix irq_disable from within irq handlers
pinctrl/rockchip: drop the gpio related codes
gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type
gpio/rockchip: support next version gpio controller
gpio/rockchip: use struct rockchip_gpio_regs for gpio controller
gpio/rockchip: add driver for rockchip gpio
dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
pinctrl/rockchip: add pinctrl device to gpio bank struct
pinctrl/rockchip: separate struct rockchip_pin_bank to a head file
pinctrl/rockchip: always enable clock for gpio controller
genirq: Fix kernel doc indentation
EDAC/altera: Convert to generic_handle_domain_irq()
powerpc: Bulk conversion to generic_handle_domain_irq()
nios2: Bulk conversion to generic_handle_domain_irq()
...
- Improve ftrace code patching so that stop_machine is not required anymore.
This requires a small common code patch acked by Steven Rostedt:
https://lore.kernel.org/linux-s390/20210730220741.4da6fdf6@oasis.local.home/
- Enable KCSAN for s390. This comes with a small common code change to fix a
compile warning. Acked by Marco Elver:
https://lore.kernel.org/r/20210729142811.1309391-1-hca@linux.ibm.com
- Add KFENCE support for s390. This also comes with a minimal x86 patch from
Marco Elver who said also this can be carried via the s390 tree:
https://lore.kernel.org/linux-s390/YQJdarx6XSUQ1tFZ@elver.google.com/
- More changes to prepare the decompressor for relocation.
- Enable DAT also for CPU restart path.
- Final set of register asm removal patches; leaving only three locations where
needed and sane.
- Add NNPA, Vector-Packed-Decimal-Enhancement Facility 2, PCI MIO support to
hwcaps flags.
- Cleanup hwcaps implementation.
- Add new instructions to in-kernel disassembler.
- Various QDIO cleanups.
- Add SCLP debug feature.
- Various other cleanups and improvements all over the place.
-----BEGIN PGP SIGNATURE-----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=WDRh
-----END PGP SIGNATURE-----
Merge tag 's390-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Improve ftrace code patching so that stop_machine is not required
anymore. This requires a small common code patch acked by Steven
Rostedt:
https://lore.kernel.org/linux-s390/20210730220741.4da6fdf6@oasis.local.home/
- Enable KCSAN for s390. This comes with a small common code change to
fix a compile warning. Acked by Marco Elver:
https://lore.kernel.org/r/20210729142811.1309391-1-hca@linux.ibm.com
- Add KFENCE support for s390. This also comes with a minimal x86 patch
from Marco Elver who said also this can be carried via the s390 tree:
https://lore.kernel.org/linux-s390/YQJdarx6XSUQ1tFZ@elver.google.com/
- More changes to prepare the decompressor for relocation.
- Enable DAT also for CPU restart path.
- Final set of register asm removal patches; leaving only three
locations where needed and sane.
- Add NNPA, Vector-Packed-Decimal-Enhancement Facility 2, PCI MIO
support to hwcaps flags.
- Cleanup hwcaps implementation.
- Add new instructions to in-kernel disassembler.
- Various QDIO cleanups.
- Add SCLP debug feature.
- Various other cleanups and improvements all over the place.
* tag 's390-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (105 commits)
s390: remove SCHED_CORE from defconfigs
s390/smp: do not use nodat_stack for secondary CPU start
s390/smp: enable DAT before CPU restart callback is called
s390: update defconfigs
s390/ap: fix state machine hang after failure to enable irq
KVM: s390: generate kvm hypercall functions
s390/sclp: add tracing of SCLP interactions
s390/debug: add early tracing support
s390/debug: fix debug area life cycle
s390/debug: keep debug data on resize
s390/diag: make restart_part2 a local label
s390/mm,pageattr: fix walk_pte_level() early exit
s390: fix typo in linker script
s390: remove do_signal() prototype and do_notify_resume() function
s390/crypto: fix all kernel-doc warnings in vfio_ap_ops.c
s390/pci: improve DMA translation init and exit
s390/pci: simplify CLP List PCI handling
s390/pci: handle FH state mismatch only on disable
s390/pci: fix misleading rc in clp_set_pci_fn()
s390/boot: factor out offset_vmlinux_info() function
...
While in practice vcpu->vcpu_idx == vcpu->vcp_id is often true, it may
not always be, and we must not rely on this. Reason is that KVM decides
the vcpu_idx, userspace decides the vcpu_id, thus the two might not
match.
Currently kvm->arch.idle_mask is indexed by vcpu_id, which implies
that code like
for_each_set_bit(vcpu_id, kvm->arch.idle_mask, online_vcpus) {
vcpu = kvm_get_vcpu(kvm, vcpu_id);
do_stuff(vcpu);
}
is not legit. Reason is that kvm_get_vcpu expects an vcpu_idx, not an
vcpu_id. The trouble is, we do actually use kvm->arch.idle_mask like
this. To fix this problem we have two options. Either use
kvm_get_vcpu_by_id(vcpu_id), which would loop to find the right vcpu_id,
or switch to indexing via vcpu_idx. The latter is preferable for obvious
reasons.
Let us make switch from indexing kvm->arch.idle_mask by vcpu_id to
indexing it by vcpu_idx. To keep gisa_int.kicked_mask indexed by the
same index as idle_mask lets make the same change for it as well.
Fixes: 1ee0bc559d ("KVM: s390: get rid of local_int array")
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Christian Bornträger <borntraeger@de.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 3.15+
Link: https://lore.kernel.org/r/20210827125429.1912577-1-pasic@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When this feature is enabled the hardware is free to interpret
specification exceptions generated by the guest, instead of causing
program interruption interceptions.
This benefits (test) programs that generate a lot of specification
exceptions (roughly 4x increase in exceptions/sec).
Interceptions will occur as before if ICTL_PINT is set,
i.e. if guest debug is enabled.
There is no indication if this feature is available or not and the
hardware is free to interpret or not. So we can simply set this bit and
if the hardware ignores it we fall back to intercept 8 handling.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Link: https://lore.kernel.org/linux-s390/20210706114714.3936825-1-scgl@linux.ibm.com/
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The secondary CPU start C routine uses nodat_stack as a
interim stack before finally switching to kernel_stack.
Such scheme is superfluous, since the assembler restart
interrupt handler (that secondary CPU starter is called
from) does not need to use any stack for switching into
DAT mode. Once DAT is on, any stack including virtually-
mapped one could be used.
Avoid the use of nodat_stack and smp_start_secondary()
helper. Instead, initiate kernel_stack directly from
the restart interrupt handler.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The restart interrupt is triggered whenever a secondary CPU is
brought online, a remote function call dispatched from another
CPU or a manual PSW restart is initiated and causes the system
to kdump. The handling routine is always called with DAT turned
off. It then initializes the stack frame and invokes a callback.
The existing callbacks handle DAT as follows:
* __do_restart() and __machine_kexec() turn in on upon entry;
* __ipl_run(), __reipl_run() and __dump_run() do not turn it
right away, but all of them call diag308() - which turns DAT
on, but only if kasan is enabled;
In addition to the described complexity all callbacks (and the
functions they call) should avoid kasan instrumentation while
DAT is off.
This update enables DAT in the assembler restart handler and
relieves any callbacks (which are mostly C functions) from
dealing with DAT altogether.
There are four types of CPU restart that initialize control
registers in different ways:
1. Start of secondary CPU on boot - control registers are
inherited from the IPL CPU;
2. Restart of online CPU - control registers of the CPU being
restarted are kept;
3. Hotplug of offline CPU - control registers are inherited
from the starting CPU;
4. Start of offline CPU triggered by manual PSW restart -
the control registers are read from the absolute lowcore
and contain the boot time IPL CPU values updated with all
follow-up calls of smp_ctl_set_bit() and smp_ctl_clear_bit()
routines;
In first three cases contents of the control registers is the
most recent. In the latter case control registers are good
enough to facilitate successful completion of kdump operation.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Ingo Franzki reported that our defconfig and debug_config went out of
sync with respect to DM_INTEGRITY. Fix it.
Reported-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Generate kvm hypercall functions with a macro instead of duplicating
the more or less identical code seven times. This also reduces number
of lines of code.
However the main purpose is to get rid of as many as possible open
coded error prone register asm constructs in s390 architecture code.
For the only user of kvm_hypercall identical code is created
before/after this patch (drivers/s390/virtio/virtio_ccw.c).
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20210713145713.2815167-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add tracing of interactions between the SCLP base driver, firmware and
other drivers to support problem determination in case of SCLP-related
issues.
For that purpose this patch introduces two new s390dbf debug areas:
- sclp: An abbreviated log of all common interactions
- sclp_err: A full log of failed or abnormal interactions
Tracing of full SCCB contents can be enabled for the sclp area by
setting its debug level to maximum (6).
Overview of added trace events:
* Firmware interaction:
- SRV1: Service call about to be issued
- SRV2: Service call was issued
- INT: Interrupt received
* Driver interaction:
- RQAD: Request was added
- RQOK: Request success
- RQAB: Request aborted
- RQTM: Request timed out
- REG: Event listener registered
- UREG: Event listener unregistered
- EVNT: Event callback
- STCG: State-change callback
* Abnormal events:
- TMO: A timeout occurred
- UNEX: Unexpected SCCB completion
* Other (not traced at default level):
- SYN1: Synchronous wait start
- SYN2: Synchronous wait end
Since the SCLP interface is used by console drivers this patch also
moves s390dbf printks outside the critical section protected by debug
area locks to prevent a potential deadlock that would otherwise be
introduced between console_owner --> sclp_lock --> sclp_debug.lock.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
