Currently with -mindirect-branch=thunk and -mfunction-return=thunk compiler
options expoline thunks are put into individual COMDAT group sections. s390
is the only architecture which has group sections and it has implications
for kpatch and objtool tools support.
Using -mindirect-branch=thunk-extern and -mfunction-return=thunk-extern
is an alternative, which comes with a need to generate all required
expoline thunks manually. Unfortunately modules area is too far away from
the kernel image, and expolines from the kernel image cannon be used.
But since all new distributions (except Debian) build kernels for machine
generations newer than z10, where "exrl" instruction is available, that
leaves only 16 expolines thunks possible.
Provide an option to build the kernel with
-mindirect-branch=thunk-extern and -mfunction-return=thunk-extern for
z10 or newer. This also requires to postlink expoline thunks into all
modules explicitly. Currently modules already contain most expolines
anyhow.
Unfortunately -mindirect-branch=thunk-extern and
-mfunction-return=thunk-extern options support is broken in gcc <= 11.2.
Additional compile test is required to verify proper gcc support.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Co-developed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Currently assembler generated expoline thunks are always in a form
__s390_indirect_jump_rXuse_rX even when exrl instruction is available
and no additional register is utilized.
Generate __s390_indirect_jump_rX versions using a single register if the
kernel is built for z10 or newer machine, which have exrl instruction
available. Thunks generated are identical to the ones generated by the
compiler.
This helps to reduce the number of thunks for newer machines generations.
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Commit c1e18c17bd ("s390/pci: add zpci_set_irq()/zpci_clear_irq()")
made zpci_set_irq()/zpci_clear_irq() non-static in preparation for using
them in zpci_hot_reset_device(). The version of zpci_hot_reset_device()
that was finally merged however exploits the fact that IRQs and DMA is
implicitly disabled by clp_disable_fh() so the call to zpci_clear_irq()
was never added. There are no other calls outside pci_irq.c so lets make
both functions static.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This reverts commit 6deaa3bbca ("s390: extend expoline to BC
instructions"). Expolines to BC instructions were added to be utilized
by commit de5cb6eb51 ("s390: use expoline thunks in the BPF JIT"). But
corresponding code has been removed by commit e1cf4befa2 ("bpf, s390x:
remove ld_abs/ld_ind"). And compiler does not generate such expolines as
well.
Compared to regular expolines, expolines to BC instructions contain
displacement and all possible variations cannot be generated in advance,
making kpatch support more complicated. So, remove those to avoid
future usages.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Change struct ext_code to contain a union which allows to simply
assign the int_code instead of using a cast.
In order to keep the patch small the anonymous union is embedded
within the existing struct instead of changing the struct ext_code to
a union.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add a proper union in lowcore to reflect architecture and get rid of a
"magic" cast in order to read the full per code.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add a proper union in lowcore to reflect architecture and get rid of a
"magic" cast in order to read the full program interruption code.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Fix the following build warning with W=1
arch/s390/lib/test_unwind.c:172:21: warning: variable 'fops' set but not used [-Wunused-but-set-variable]
struct ftrace_ops *fops;
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The only user is gone. Remove the section.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Instead of decoding the instruction that faulted to get the register
which needs to be zeroed, simply encode its number into the extable
entries during code generation. This allows to get rid of a bit of
code, and is also what other architectures are doing.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This is more or less a combination of commit 2e77a62cb3 ("arm64:
extable: add a dedicated uaccess handler") and commit 4b5305decc
("x86/extable: Extend extable functionality").
To describe the problem that needs to solved let's cite the full arm64
commit message:
------
For inline assembly, we place exception fixups out-of-line in the
`.fixup` section such that these are out of the way of the fast path.
This has a few drawbacks:
* Since the fixup code is anonymous, backtraces will symbolize fixups
as offsets from the nearest prior symbol, currently
`__entry_tramp_text_end`. This is confusing, and painful to debug
without access to the relevant vmlinux.
* Since the exception handler adjusts the PC to execute the fixup, and
the fixup uses a direct branch back into the function it fixes,
backtraces of fixups miss the original function. This is confusing,
and violates requirements for RELIABLE_STACKTRACE (and therefore
LIVEPATCH).
* Inline assembly and associated fixups are generated from templates,
and we have many copies of logically identical fixups which only
differ in which specific registers are written to and which address
is branched to at the end of the fixup. This is potentially wasteful
of I-cache resources, and makes it hard to add additional logic to
fixups without significant bloat.
This patch address all three concerns for inline uaccess fixups by
adding a dedicated exception handler which updates registers in
exception context and subsequent returns back into the function which
faulted, removing the need for fixups specialized to each faulting
instruction.
Other than backtracing, there should be no functional change as a result
of this patch.
------
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Follow arm64, riscv, and x86 and change extable layout to common
"relative table with data". This allows to get rid of s390 specific
code in sorttable.c.
The main difference to before is that extable entries do not contain a
relative function pointer anymore. Instead data and type fields are
added.
The type field is used to indicate which exception handler needs to be
called, while the data field is currently unused.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add and use fixup_exception helper function in order to remove the
duplicated exception handler fixup code at several places.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Pass pt_regs to early program check handler like it is done for every
other interrupt and exception handler.
Also the passed pt_regs can be changed by the called function and the
changes register contents and psw contents will be taken into account
when returning. In addition the return psw will not be copied to the
program check old psw in lowcore, but to the usual return psw
location, like it is also done by the regular program check handler.
This allows also to get rid of the code that disabled lowcore
protection when changing the return address.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Just like arm64, riscv, and x86 move extable related functions to
mm/extable.c. This is currently only one function, but this will
change with subsequent changes.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Follow arm64 and riscv and move the EX_TABLE define to asm-extable.h
which is a lot less generic than the current linkage.h.
Also make sure that all files which contain EX_TABLE usages actually
include the new header file. This should make sure that the files
always compile and there won't be any random compile breakage due to
other header file dependencies.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
It is very unlikely that an exception happens within the amode31 text
section, therefore safe a couple of cycles for the common case, and
search the amode31 extable last.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The early program check handler is active before the amode31 extable
is sorted. Therefore in case a program check happens early within the
amode31 code the extable entry might not be found.
Fix this by sorting the amode31 extable early.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Protected virtualization guests have to use shared pages for airq
notifier bit vectors and summary bytes or bits, thus these need to be
allocated as DMA coherent memory. Commit b50623e5db ("s390/airq: use
DMA memory for adapter interrupts") took care of the notifier bit
vectors, but omitted to take care of the summary bytes/bits.
In practice this omission is not a big deal, because the summary ain't
necessarily allocated here, but can be supplied by the driver. Currently
all the I/O we have for SE guests is virtio-ccw, and virtio-ccw uses a
self-allocated array of summary indicators.
Let us cover all our bases nevertheless!
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The scheduling function will get an extension which will
process the target_id value from an EP11 cprb. This patch
extracts the value during preparation of the ap message.
Signed-off-by: Jürgen Christ <jchrist@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Instead of offering the user space given receive buffer size to
the crypto card firmware as limit for the reply message offer
the internal per queue reply buffer size. As the queue's reply
buffer is always adjusted to the max message size possible for
this card this may offer more buffer space. However, now it is
important to check the user space reply buffer on pushing back
the reply. If the reply does not fit into the user space provided
buffer the ioctl will fail with errno EMSGSIZE.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There is a new CPRB minor version T7 to be supported with
this patch. Together with this the functions which extract
the CPRB data from userspace and prepare the AP message do
now check the CPRB minor version and provide some info in
the flag field of the ap message struct for further processing.
The 3 functions doing this job have been renamed to
prep_cca_ap_msg, prep_ep11_ap_msg and prep_rng_ap_msg to
reflect their job better (old was get..fc).
This patch also introduces two new flags to be used internal
with the flag field of the struct ap_message:
AP_MSG_FLAG_USAGE is set when prep_cca_ap_msg or prep_ep11_ap_msg
come to the conclusion that this is a ordinary crypto load CPRB
(which means T2 for CCA CPRBs and no admin bit for EP11 CPRBs).
AP_MSG_FLAG_ADMIN is set when prep_cca_ap_msg or prep_ep11_ap_msg
think, this is an administrative (control) crypto load CPRB
(which means T3, T5, T6 or T7 for CCA CPRBs and admin bit set
for EP11 CPRBs).
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
A crypto card may be in checkstopped state. With this
patch this is handled as a new state in the ap card and
ap queue structs. There is also a new card sysfs attribute
/sys/devices/ap/cardxx/chkstop
and a new queue sysfs attribute
/sys/devices/ap/cardxx/xx.yyyy/chkstop
displaying the checkstop state of the card or queue. Please
note that the queue's checkstop state is only a copy of the
card's checkstop state but makes maintenance much easier.
The checkstop state expressed here is the result of an
RC 0x04 (CHECKSTOP) during an AP command, mostly the
PQAP(TAPQ) command which is 'testing' the queue.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch adds CEX8 exploitation support for the AP bus code,
the zcrypt device driver zoo and the vfio device driver.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch adds some debug feature improvements related
to some failures happened in the past. With CEX8 the max
request and response sizes have been extended but the
user space applications did not rework their code and
thus ran into receive buffer issues. This ffdc patch
here helps with additional checks and debug feature
messages in debugging and pointing to the root cause of
some failures related to wrong buffer sizes.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Disallow constructs like this:
pte_val(*pte) = __pa(addr) | prot;
which would directly write into a page table. Users are supposed to
use the set_pte()/set_pXd() primitives, which guarantee block
concurrent (aka atomic) writes.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Convert pgtable code so pte_val()/pXd_val() aren't used as lvalue
anymore. This allows in later step to convert pte_val()/pXd_val() to
functions, which in turn makes it impossible to use these macros to
modify page table entries like they have been used before.
Therefore a construct like this:
pte_val(*pte) = __pa(addr) | prot;
which would directly write into a page table, isn't possible anymore
with the last step of this series.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Convert pgtable code so pte_val()/pXd_val() aren't used as lvalue
anymore. This allows in later step to convert pte_val()/pXd_val() to
functions, which in turn makes it impossible to use these macros to
modify page table entries like they have been used before.
Therefore a construct like this:
pte_val(*pte) = __pa(addr) | prot;
which would directly write into a page table, isn't possible anymore
with the last step of this series.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Convert pgtable code so pte_val()/pXd_val() aren't used as lvalue
anymore. This allows in later step to convert pte_val()/pXd_val() to
functions, which in turn makes it impossible to use these macros to
modify page table entries like they have been used before.
Therefore a construct like this:
pte_val(*pte) = __pa(addr) | prot;
which would directly write into a page table, isn't possible anymore
with the last step of this series.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Convert pgtable code so pte_val()/pXd_val() aren't used as lvalue
anymore. This allows in later step to convert pte_val()/pXd_val() to
functions, which in turn makes it impossible to use these macros to
modify page table entries like they have been used before.
Therefore a construct like this:
pte_val(*pte) = __pa(addr) | prot;
which would directly write into a page table, isn't possible anymore
with the last step of this series.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use the new set_pXd()/set_pte() helper functions at all places where
page table entries are modified.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add set_pte_bit()/clear_pte_bit() and set_pXd_bit()/clear_pXd_bit
helper functions which are supposed to be used if bits within
ptes/pXds are set/cleared.
The only point of these helper functions is to get more readable
code. This is quite similar to what arm64 has.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add set_pXd()/set_pte() helper functions which must be used to update
page table entries. The new helpers use WRITE_ONCE() to make sure that
a page table entry is written to only once.
Without this the compiler could otherwise generate code which writes
several times to a page table entry when updating its contents from
invalid to valid, which could lead to surprising results especially
for multithreaded processes...
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Finally use epsw to create a complete psw mask within pt_regs. Without
this only some bits are correct, while other bits are (incorrectly)
always zero.
The epsw instruction is quite heavy weight, however given that this
only effects ftrace_regs_caller this seems to be the right thing, so
we finally get a complete psw mask for ftrace kprobed functions.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove opencoded offsetof and use offsetof instead.
The generated code is identical before/after this change.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
With commit 5789284710 ("s390/smp: reallocate IPL CPU lowcore")
virtual addresses are wrongly passed to memblock_free_late() and
SPX instructions on IPL CPU reinitialization.
Note: this does not fix a bug currently, since virtual and
physical addresses are identical.
Fixes: 5789284710 ("s390/smp: reallocate IPL CPU lowcore")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch switches the sysfs attribute /sys/bus/ap/scans
from read-only to read-write. If there is something written
to this attribute, an AP bus rescan is forced. If an AP
bus scan is triggered this way a debug feature entry line
reports this in /sys/kernel/debug/s390dbf/ap/sprintf.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jakob Naucke <naucke@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch introduces an extension to the ap bus to notify device drivers
when the host AP configuration changes - i.e., adapters, domains or
control domains are added or removed. When an adapter or domain is added to
the host's AP configuration, the AP bus will create the associated queue
devices in the linux sysfs device model. Each new type 10 (i.e., CEX4) or
newer queue device with an APQN that is not reserved for the default device
driver will get bound to the vfio_ap device driver. Likewise, whan an
adapter or domain is removed from the host's AP configuration, the AP bus
will remove the associated queue devices from the sysfs device model. Each
of the queues that is bound to the vfio_ap device driver will get unbound.
With the introduction of hot plug support, binding or unbinding of a
queue device will result in plugging or unplugging one or more queues from
a guest that is using the queue. If there are multiple changes to the
host's AP configuration, it could result in the probe and remove callbacks
getting invoked multiple times. Each time queues are plugged into or
unplugged from a guest, the guest's VCPUs must be taken out of SIE.
If this occurs multiple times due to changes in the host's AP
configuration, that can have an undesirable negative affect on the guest's
performance.
To alleviate this problem, this patch introduces two new callbacks: one to
notify the vfio_ap device driver when the AP bus scan routine detects a
change to the host's AP configuration; and, one to notify the driver when
the AP bus is done scanning. This will allow the vfio_ap driver to do
bulk processing of all affected adapters, domains and control domains for
affected guests rather than plugging or unplugging them one at a time when
the probe or remove callback is invoked. The two new callbacks are:
void (*on_config_changed)(struct ap_config_info *new_config_info,
struct ap_config_info *old_config_info);
This callback is invoked at the start of the AP bus scan
function when it determines that the host AP configuration information
has changed since the previous scan. This is done by storing
an old and current QCI info struct and comparing them. If there is any
difference, the callback is invoked.
void (*on_scan_complete)(struct ap_config_info *new_config_info,
struct ap_config_info *old_config_info);
The on_scan_complete callback is invoked after the ap bus scan is
completed if the host AP configuration data has changed.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Introduces a new driver callback to prevent a root user from re-assigning
the APQN of a queue that is in use by a non-default host device driver to
a default host device driver and vice versa. The callback will be invoked
whenever a change to the AP bus's sysfs apmask or aqmask attributes would
result in one or more APQNs being re-assigned. If the callback responds
in the affirmative for any driver queried, the change to the apmask or
aqmask will be rejected with a device busy error.
For this patch, only non-default drivers will be queried. Currently,
there is only one non-default driver, the vfio_ap device driver. The
vfio_ap device driver facilitates pass-through of an AP queue to a
guest. The idea here is that a guest may be administered by a different
sysadmin than the host and we don't want AP resources to unexpectedly
disappear from a guest's AP configuration (i.e., adapters and domains
assigned to the matrix mdev). This will enforce the proper procedure for
removing AP resources intended for guest usage which is to
first unassign them from the matrix mdev, then unbind them from the
vfio_ap device driver.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Running kprobe test on a kernel built with clang 14 didn't actually
trigger pgm_pre_handler() and no unwinder code was called. Even though
do_report_trap() is a global symbol, clang inlined it in several local
functions including illegal_op() handler, so that kprobbing a global
symbol didn't have a desired effect.
To achieve the same test result (unwinding from a program check
handler) introduce a local function and probe an instruction in the
middle, so that kprobe doesn't take KPROBE_ON_FTRACE path.
While at it, add another test for KPROBE_ON_FTRACE.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
By default no backtraces are printed when a test succeeds, but sometimes
it is useful to spot issues automated test doesn't cover. Add "backtrace"
module parameter to force it.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
-mpacked-stack option has been supported by both minimum
gcc and clang versions for a while. With commit e2bc3e91d9
("scripts/min-tool-version.sh: Raise minimum clang version to 13.0.0
for s390") minimum clang version now also supports a combination
of flags -mpacked-stack -mbackchain -pg -mfentry and fulfills
all requirements to always enable the packed stack layout.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This helps to avoid several merge conflicts later.
* fixes:
s390/extable: fix exception table sorting
s390/ftrace: fix arch_ftrace_get_regs implementation
s390/ftrace: fix ftrace_caller/ftrace_regs_caller generation
s390/setup: preserve memory at OLDMEM_BASE and OLDMEM_SIZE
s390/cio: verify the driver availability for path_event call
s390/module: fix building test_modules_helpers.o with clang
MAINTAINERS: downgrade myself to Reviewer for s390
MAINTAINERS: add Alexander Gordeev as maintainer for s390
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
s390 has a swap_ex_entry_fixup function, however it is not being used
since common code expects a swap_ex_entry_fixup define. If it is not
defined the default implementation will be used. So fix this by adding
a proper define.
However also the implementation of the function must be fixed, since a
NULL value for handler has a special meaning and must not be adjusted.
Luckily all of this doesn't fix a real bug currently: the main extable
is correctly sorted during build time, and for runtime sorting there
is currently no case where the handler field is not NULL.
Fixes: 05a68e892e ("s390/kernel: expand exception table logic to allow new handling options")
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
