In asoc_simple_parse_dai(), we should call of_node_put() for the
reference returned by of_graph_get_port_parent() in fail path.
Fixes: 6e5f68fe3f ("ASoC: add Audio Graph Card2 driver")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220722141801.1304854-1-windhl@126.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In asoc_simple_parse_dai(), we should call of_node_put() for the
reference returned by of_graph_get_port_parent() in fail path.
Fixes: ae30a694da ("ASoC: simple-card-utils: add asoc_simple_card_parse_dai()")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220721144308.1301587-1-windhl@126.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should call of_node_put() for the reference before its replacement
as it returned by of_get_parent() which has increased the refcount.
Besides, we should also call of_node_put() before return.
Fixes: c8c74939f7 ("ASoC: audio-graph-card2: add Multi CPU/Codec support")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220713071200.366729-1-windhl@126.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current asoc_simple_init_for_codec2codec() adds default Codec2Codec
settings if rtd was Codec only.
But DPCM:BE also judged as Codec only, because dummy-DAI doesn't have
"endianness" (which is key parameter to judge as Codec).
This patch ignores setup Codec2Codec settings if it was DPCM:BE case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a69ts950.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio Graph Card2 setups own Codec2Codec settings,
but current simple-card-utils.c will try to setup Codec2Codec default
settings if needed, it will overwirtes the settings.
This patch ignores default Codec2Codec settings if it already have.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bku9s95b.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph-card2-custom-sample.dtsi will be used to test
Audio-Graph-Card2 behavior. But it is difficult to say that it is easy
to understand, because the comment/explanation are not so many.
This patch add verbose explanation to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czeps95h.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because Codec2Codec settings becomes optional, we don't need to keep
its parameter space when init time. This patch removes its default
memory allocation from simple-card-utils.c, and allocate it at
audio-graph-card2 ondemand.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87edz5s95o.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current audio-graph-card2 can use Codec2Codec, and having its
original parameter (= rate) on DT is mandatory for now.
But simple-card-utils.c has asoc_simple_init_for_codec2codec() to
setup *default* Codec2Codec settings.
This patch makes Audio Graph Card2 Codec2Codec rate settings
optional.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fsjls95u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio Graph Card2 is using of_get_property(), but it should use
of_property_read_u32() to getting rate. Otherwise the setting will be
strange value. This patch fixup it.
Fixes: c3a15c92a6 ("ASoC: audio-graph-card2: add Codec2Codec support")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h741s961.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Historically, the legacy DAI naming scheme was applied to platform
drivers and the newer scheme to CODEC drivers. During componentisation
the core lost the knowledge of if a driver was a CODEC or platform, they
were all now components. To continue to support the legacy naming on
older platform drivers a flag was added to the snd_soc_component_driver
structure, non_legacy_dai_naming, to indicate to use the new scheme and
this was applied to all CODECs as part of the migration.
However, a slight issue appears to be developing with respect to this
flag being opt in for the non-legacy scheme, which presumably we want to
be the primary scheme used. Many codec drivers appear to forget to
include this flag:
grep -l -r "snd_soc_component_driver" sound/soc/codecs/*.c |
xargs grep -L "non_legacy_dai_naming" | wc
48 48 556
Whilst in many cases the configuration of the DAIs themselves will cause
the core to apply the new scheme anyway, it would seem more sensible to
change the flag to legacy_dai_naming making the new scheme opt out. This
patch series migrates across to such a scheme.
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-44-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
This driver appears to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-26-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The example in audio-graph-card2.c has multiple nodes with the same name
in it. Change the port numbers to get different names.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220624092601.2445224-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Currently the set_fmt callback always passes clock provider/consumer
with respect to the CODEC. This made sense when the framework was
directly broken down into platforms and CODECs. However, as things
are now broken down into components which can be connected as either
the CPU or CODEC side of a DAI link it simplifies things if each
side of the link is just told if it is provider or consumer of the
clocks. Making this change allows us to remove one of the last parts
of the ASoC core that needs to know if a driver is a CODEC driver,
where it flips the clock format specifier if a CODEC driver is used on
the CPU side of a DAI link, as well as just being conceptually more
consistent with componentisation.
The basic idea of this patch chain is to change the set_fmt callback
from specifying if the CODEC is provider/consumer into directly
specifying if the component is provider/consumer. To do this we add
some new defines, and then to preserve bisectability, the migration is
done by adding a new callback, converting over all existing CPU side
drivers, converting the core, and then finally reverting back to the
old callback.
Converting the platform drivers makes sense as the existing defines
are from the perspective of the CODEC and there are more CODEC drivers
than platform drivers.
Obviously a fair amount of this patch chain I was only able to build
test, so any testing that can be done would be greatly appreciated.
asoc_simple_clean_reference() returns zero unconditionally. Letting it
return void instead makes it easier to see in the caller that there is no
error to handle.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220605153537.26591-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 95cfc0a0aa ("ASoC: simple-card: Add support for
codec2codec DAI links") added the function
asoc_simple_init_dai_link_params() to initialize dai_link "params".
It is very straight naming, but difficult to noticed that it is for
Codec2Codec support. Handling Codec2Codec is one of very tricky part
on ALSA SoC, thus it is very important to clarify it. This patch
renames the function name.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7zflk3n.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The helper function snd_soc_component_is_codec is based off the
presence of the non_legacy_dai_naming flag. This isn't super robust
as CPU side components may also specify this flag, and indeed the
kernel already contains a couple that do. After componentisation there
isn't really a totally robust solution to identifying what is a CODEC
driver, without introducing a flag specifically for that purpose, and
really the desirable direction to move in is that the distinction
doesn't matter.
This patch does two things to try to mitigate these problems. Firstly,
now that all the other users of the helper function have been removed,
it makes the helper function local to the driver rather, than being
part of the core. This should help to discourage any new code from
being created that depends on the CODEC driver distinction. Secondly,
it updates the helper function itself to use the endianness flag
rather than the non_legacy_dai_naming flag. The endianness flag is
definitely invalid on a CPU side component, so it a more reliable
indicator that the device is definitely a CODEC. The vast majority of
buses require the CODEC to set the endianness flag, so the number of
corner cases should be fairly minimal. It is worth noting that CODECs
sending audio over SPI, or built into the CPU CODECs are potential
corner cases, however the hope is that in most cases those types of
devices do not consitute a simple audio card.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220519154318.2153729-57-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now the core has been migrated across to the new direct clock
specification we can move the drivers back to the normal set_fmt
callback.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220519154318.2153729-52-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of updating the core to directly tell drivers if they are clock
provider or consumer update this CPU side driver to use the new direct
callback.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20220519154318.2153729-25-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because Sound Card needs many drivers to probe, current audio-graph-card2
will indicate "Experimental stage" at top of probe function even though
in case it gets -EPROBE_DEFER, thus it will be indicated many times.
This patch indicates it when probe was succeeded.
[ 1.601393] asoc-audio-graph-card2 sound: Audio Graph Card2 is still under Experimental stage
...
[ 1.721269] asoc-audio-graph-card2 sound: Audio Graph Card2 is still under Experimental stage
...
[ 1.755231] asoc-audio-graph-card2 sound: Audio Graph Card2 is still under Experimental stage
...
[ 1.907710] asoc-audio-graph-card2 sound: Audio Graph Card2 is still under Experimental stage
...
[ 1.933173] rcar_sound ec500000.sound: probed
[ 1.948875] asoc-audio-graph-card2 sound: Audio Graph Card2 is still under Experimental stage
[ 1.959558] asoc-audio-graph-card2 sound: ak4613-hifi <-> rsnd-dai.0 mapping ok
[ 1.968119] asoc-audio-graph-card2 sound: i2s-hifi <-> rsnd-dai.1 mapping ok
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o80vgn5a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In asoc_simple_shutdown() the snd_soc_dai_set_sysclk() function
is called twice with input direction SND_SOC_CLOCK_IN.
Restore one call with output direction SND_SOC_CLOCK_OUT.
Fixes: 5ca2ab4598 ("ASoC: simple-card-utils: Add new system-clock-fixed flag")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20220412111658.11015-1-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_card_jack_new() allowed to create jack kcontrol without pins,
but did not create kcontrols. The jack would not have kcontrols if pins
were not going to be added.
This renames the old snd_soc_card_jack_new() to
snd_soc_card_jack_new_pins() for use when pins are provided or will be
added later. The new snd_soc_card_jack_new() appropriately creates a
jack for use without pins and adds a kcontrol.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Link: https://lore.kernel.org/r/20220408041114.6024-1-akihiko.odaki@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't dereference simple_dai before it has been checked for NULL.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 1e974e5b82 ("ASoC: audio_graph_card2: Add support for variable slot widths")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220404113252.1152659-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Playback or capture errors are seen when clock is reset during an active
stage of DAI. Presently this scenario happens when DAI has both playback
and capture sessions running and one of these finishes first which will
be followed by clock rate reset. The remaining active session will be
affected in such case.
Address this problem by allowing clock rate reset to happen only when
the DAI is no more active.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1646910999-2501-1-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some audio hardware cannot support the same slot width for all sample
widths, or a slot width equal to the sample width for all sample widths.
This is usually due either to limitations of the audio serial port or
system clocking restrictions.
A typical example would be:
- 16-bit samples in 16-bit slots
- 24-bit samples in 32-bit slots
The new dai-tdm-slot-width-map property allows setting a mapping of
sample widths and the corresponding tdm slot widths and slot counts.
Although the slot count is usually the same for all cases this does
allow for adding padding slots to maintain the same bitclk frequency.
The property is added to each endpoint node that needs the component
DAI to be told the TDM slot width and count.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220228172754.453783-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new system-clock-fixed flag, which can be used to specify that the
driver cannot or should not allow the clock frequency of the mapped clock
to be modified. This behavior is also implied if the system-clock-frequency
parameter is set explicitly - the flag is meant for cases where a clock is
mapped to the DAI but which is, or should be treated as, fixed.
When mclk-fs is also specified, this causes a PCM constraint to be added
which enforces that only the corresponding valid sample rate can be used.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-7-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If an mclk-fs value was provided in the device tree configuration, the
calculated MCLK was fed into the downstream codec DAI and CPU DAI,
however set_sysclk was not being called on the platform device. Some
platform devices such as the Xilinx Audio Formatter need to know the MCLK
as well.
Call snd_soc_component_set_sysclk on each component in the stream to set
the proper sysclk value in addition to the existing call of
snd_soc_dai_set_sysclk on the codec DAI and CPU DAI. This may end up
resulting in redundant calls if one of the snd_soc_dai_set_sysclk calls
ends up calling snd_soc_component_set_sysclk itself, but that isn't
expected to cause any significant harm.
Fixes: f48dcbb6d4 ("ASoC: simple-card-utils: share asoc_simple_hw_param()")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-5-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A previous change to simple-card resulted in asoc_simple_parse_dai
attempting to retrieve the dai_name for platform components, which are
unlikely to have a valid DAI name. This caused simple-card to fail to
probe when using the xlnx_formatter_pcm as the platform component, since
it does not register any DAI components.
Since the dai_name is not used for platform components, just skip trying
to retrieve it for those.
Fixes: f107294c64 ("ASoC: simple-card: support snd_soc_dai_link_component style for cpu")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220107214711.1100162-6-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core already has several helpers to parse card properties
from the device tree. Move the parsing code for "pin-switches" from
simple-card-utils to a shared snd_soc_of_parse_pin_switches() function
so other drivers can also use it to set up pin switches configured in
the device tree.
Cc: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20211214142049.20422-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Dereferncing of_id pointer will result in exception in current
implementation since of_match_device() will assign it to NULL.
Adding NULL check for protection.
Signed-off-by: Ameer Hamza <amhamza.mgc@gmail.com>
Link: https://lore.kernel.org/r/20211207142309.222820-1-amhamza.mgc@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dereferncing of_id pointer will result in exception in current
implementation since of_match_device() will assign it to NULL.
Adding NULL check for protection.
Signed-off-by: Ameer Hamza <amhamza.mgc@gmail.com>
Link: https://lore.kernel.org/r/20211205204200.7852-1-amhamza.mgc@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds Codec2Codec-Multi sample to audio-graph-card2-custom-sample.dtsi.
Because it can use very basic connection only for now,
it can use only
- 2channels
- S32_LE format
Test-Component driver has "IN" and "OUT" widget. Thus the route is
+--+ +-+
| | | |- Codec8 <- IN
| | <- | |- Codec9 <- IN
| | +-+
| |
| | +-+
| | -> | |- Codec10 -> OUT
| | | |- Codec11 -> OUT
+--+ +-+
One note here is that it will start works when it boot.
In other words we can't stop it so far.
We need to update driver for it in the future.
...
asoc-audio-graph-card2-custom-sample: multicodec <-> multicpu mapping ok
test-component test_codec: test_dai_startup() : test_codec.9
test-component test_codec: test_dai_startup() : test_codec.8
test-component test_codec: test_dai_startup() : test_codec.11
test-component test_codec: test_dai_startup() : test_codec.10
...
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mtnelu2k.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds Codec2Codec-Single sample to audio-graph-card2-custom-sample.dtsi.
Because it can use very basic connection only for now,
it can use only
- 2channels
- S32_LE format
Test-Component driver has "IN" and "OUT" widget. Thus the route is
+--+
| | <-- Codec6 <-- IN
| | --> Codec7 --> OUT
+--+
One note here is that it will start works when it boot.
In other words we can't stop it so far.
We need to update driver for it in the future.
...
asoc-audio-graph-card2-custom-sample: test_codec.7 <-> test_codec.6 mapping ok
test-component test_codec: test_dai_startup() : test_codec.6
test-component test_codec: test_dai_startup() : test_codec.7
...
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o87ulu2o.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds DPCM link Multi-CPU/Codec sample to
audio-graph-card2-custom-sample.dtsi.
This sample is assuming MIXer connection.
One note is that Multi-FE is not supported on ASoC
FE BE
**** +-+
CPU5 -- * * -- | | -- Codec4
CPU6 -- * * | | -- Codec5
**** +-+
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pmsalu2s.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds DPCM link Single-CPU/Codec sample to
audio-graph-card2-custom-sample.dtsi.
This sample is assuming MIXer connection.
FE BE
****
CPU3 -- * * -- Codec3
CPU4 -- * *
****
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r1cqlu2w.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio Graph Card2 settings is a little bit difficult for beginner,
and Customizing it also difficult/confusable too.
So, this patch adds sample for it.
You can easily use it by adding below line on your DT file,
and select CONFIGs to your .config.
#include "../../../../../sound/soc/generic/audio-graph-card2-custom-sample.dtsi"
CONFIG_SND_AUDIO_GRAPH_CARD2
CONFIG_SND_AUDIO_GRAPH_CARD2_CUSTOM_SAMPLE
CONFIG_SND_TEST_COMPONENT
This patch uses audio-graph-card2 base custom sample driver.
You can directly use audio-graph-card2 instead of custom sample driver
by modifing compatible.
- compatible = "audio-graph-card2-custom-sample";
+ compatible = "audio-graph-card2";
Sample custom driver will indicate customized print.
It is using Test-Component driver for CPU/Codec.
It can indicate more detail print of each behavior if user want to.
In such case, you need to update compatible to "xxx-nv" or "xxx-vv".
- compatible = "test-cpu";
+ compatible = "test-cpu-verbose";
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tuhmlu35.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph-card2 has customizing support.
This means user can re-use audio-graph-card2 DT parsing, and possible
to expand to own special handling.
This patch adds Audio Graph Card2 Customize Sample Driver.
It can re-use audio-graph-card2 parsing by calling
audio_graph2_parse_of(...), and user can expand each functions by
using hooks.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v922lu3c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds Codec2Codec support to audio-graph-card2.
It can use Codec2Codec but very simple case only for now.
It doesn't have "SWITCH" control yet, thus it start automatically
when it was probed, and can't stop, so far.
Thus it needs to be updated around widgets/routing handling,
and you need to understand that it is under experimental.
Codec has SND_SOC_DAPM_INPUT() (= IN) / SND_SOC_DAPM_OUTPUT(= OUT)
widgets in below case.
It is assuming 2channel, S32_LE format for now.
It needs to be updated, too.
It needs "codec2codec" node (= B), needs to have routing (= A),
need to indicate CPU side at links (= X).
ports@0 is for CPU side (= X), port@1 is Codec side (= Y).
It needs to have "rate" (= C)
+--+
| |<-- Codec0 <-- IN
| |--> Codec1 --> OUT
+--+
sound {
compatible = "audio-graph-card2";
(A) routing = "OUT" ,"DAI1 Playback",
"DAI0 Capture", "IN";
(X) links = <&c2c>;
(B) codec2codec {
ports {
(C) rate = <48000>;
(X) c2c: port@0 { c2cf_ep: endpoint { remote-endpoint = <&codec0_ep>; }; };
(Y) port@1 { c2cb_ep: endpoint { remote-endpoint = <&codec1_ep>; }; };
};
};
Codec {
ports {
port@0 {
bitclock-master;
frame-master;
codec0_ep: endpoint { remote-endpoint = <&c2cf_ep>; }; };
port@1 { codec1_ep: endpoint { remote-endpoint = <&c2cb_ep>; }; };
};
};
Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y26ylu4a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph-card2 will support DPCM/Multi/Codec2Codec,
and these will use almost same DT settings which uses
ports0 and ports1.
This patch adds asoc_graph_is_ports0() which checks
port is under port0 or not.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875yu2n8ra.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We already have dummy-codec, dummy-platform.
But its issues are
1) we don't have dummy-cpu,
2) we can't select it via DeviceTree
3) It do nothing
Sometimes we want to have Dummy Sound Component for debugging,
for testing, for learning Framework behavior, etc, etc...
This patch adds Test-Component driver for it.
User can select CPU Component by using "test-cpu" compatible,
and can select Codec Component by using "test-codec" compatible.
It doesn't support Platform so far, but is easy to add.
We can verbose print to know its progress if user selected
xxx-verbose compatible driver.
for example,
test-cpu : silent Component, silent DAI
test-cpu-verbose-component : verbose Component, silent DAI
test-cpu-verbose-dai : silent Component, verbose DAI
test-cpu-verbose : verbose Component, verbose DAI
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877dein8rx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
