We must properly handle an errors when we increase the rlimit counter
and the ucounts reference counter. We have to this with RCU protection
to prevent possible use-after-free that could occur due to concurrent
put_cred_rcu().
The following reproducer triggers the problem:
$ cat testcase.sh
case "${STEP:-0}" in
0)
ulimit -Si 1
ulimit -Hi 1
STEP=1 unshare -rU "$0"
killall sleep
;;
1)
for i in 1 2 3 4 5; do unshare -rU sleep 5 & done
;;
esac
with the KASAN report being along the lines of
BUG: KASAN: use-after-free in put_ucounts+0x17/0xa0
Write of size 4 at addr ffff8880045f031c by task swapper/2/0
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.13.0+ #19
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-alt4 04/01/2014
Call Trace:
<IRQ>
put_ucounts+0x17/0xa0
put_cred_rcu+0xd5/0x190
rcu_core+0x3bf/0xcb0
__do_softirq+0xe3/0x341
irq_exit_rcu+0xbe/0xe0
sysvec_apic_timer_interrupt+0x6a/0x90
</IRQ>
asm_sysvec_apic_timer_interrupt+0x12/0x20
default_idle_call+0x53/0x130
do_idle+0x311/0x3c0
cpu_startup_entry+0x14/0x20
secondary_startup_64_no_verify+0xc2/0xcb
Allocated by task 127:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0x7c/0x90
alloc_ucounts+0x169/0x2b0
set_cred_ucounts+0xbb/0x170
ksys_unshare+0x24c/0x4e0
__x64_sys_unshare+0x16/0x20
do_syscall_64+0x37/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 0:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0xeb/0x120
kfree+0xaa/0x460
put_cred_rcu+0xd5/0x190
rcu_core+0x3bf/0xcb0
__do_softirq+0xe3/0x341
The buggy address belongs to the object at ffff8880045f0300
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 28 bytes inside of
192-byte region [ffff8880045f0300, ffff8880045f03c0)
The buggy address belongs to the page:
page:000000008de0a388 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff8880045f0000 pfn:0x45f0
flags: 0x100000000000200(slab|node=0|zone=1)
raw: 0100000000000200 ffffea00000f4640 0000000a0000000a ffff888001042a00
raw: ffff8880045f0000 000000008010000d 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880045f0200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880045f0280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff8880045f0300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880045f0380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff8880045f0400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint
Fixes: d646969055 ("Reimplement RLIMIT_SIGPENDING on top of ucounts")
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge more updates from Andrew Morton:
"190 patches.
Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
signals, exec, kcov, selftests, compress/decompress, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
ipc/util.c: use binary search for max_idx
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
ipc: use kmalloc for msg_queue and shmid_kernel
ipc sem: use kvmalloc for sem_undo allocation
lib/decompressors: remove set but not used variabled 'level'
selftests/vm/pkeys: exercise x86 XSAVE init state
selftests/vm/pkeys: refill shadow register after implicit kernel write
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
exec: remove checks in __register_bimfmt()
x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
hfsplus: report create_date to kstat.btime
hfsplus: remove unnecessary oom message
nilfs2: remove redundant continue statement in a while-loop
kprobes: remove duplicated strong free_insn_page in x86 and s390
init: print out unknown kernel parameters
checkpatch: do not complain about positive return values starting with EPOLL
checkpatch: improve the indented label test
checkpatch: scripts/spdxcheck.py now requires python3
...
Currently we handle SS_AUTODISARM as soon as we have stored the altstack
settings into sigframe - that's the point when we have set the things up
for eventual sigreturn to restore the old settings. And if we manage to
set the sigframe up (we are not done with that yet), everything's fine.
However, in case of failure we end up with sigframe-to-be abandoned and
SIGSEGV force-delivered. And in that case we end up with inconsistent
rules - late failures have altstack reset, early ones do not.
It's trivial to get consistent behaviour - just handle SS_AUTODISARM once
we have set the sigframe up and are committed to entering the handler,
i.e. in signal_delivered().
Link: https://lore.kernel.org/lkml/20200404170604.GN23230@ZenIV.linux.org.uk/
Link: https://github.com/ClangBuiltLinux/linux/issues/876
Link: https://lkml.kernel.org/r/20210422230846.1756380-1-ndesaulniers@google.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull user namespace rlimit handling update from Eric Biederman:
"This is the work mainly by Alexey Gladkov to limit rlimits to the
rlimits of the user that created a user namespace, and to allow users
to have stricter limits on the resources created within a user
namespace."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
cred: add missing return error code when set_cred_ucounts() failed
ucounts: Silence warning in dec_rlimit_ucounts
ucounts: Set ucount_max to the largest positive value the type can hold
kselftests: Add test to check for rlimit changes in different user namespaces
Reimplement RLIMIT_MEMLOCK on top of ucounts
Reimplement RLIMIT_SIGPENDING on top of ucounts
Reimplement RLIMIT_MSGQUEUE on top of ucounts
Reimplement RLIMIT_NPROC on top of ucounts
Use atomic_t for ucounts reference counting
Add a reference to ucounts for each cred
Increase size of ucounts to atomic_long_t
- Changes to core scheduling facilities:
- Add "Core Scheduling" via CONFIG_SCHED_CORE=y, which enables
coordinated scheduling across SMT siblings. This is a much
requested feature for cloud computing platforms, to allow
the flexible utilization of SMT siblings, without exposing
untrusted domains to information leaks & side channels, plus
to ensure more deterministic computing performance on SMT
systems used by heterogenous workloads.
There's new prctls to set core scheduling groups, which
allows more flexible management of workloads that can share
siblings.
- Fix task->state access anti-patterns that may result in missed
wakeups and rename it to ->__state in the process to catch new
abuses.
- Load-balancing changes:
- Tweak newidle_balance for fair-sched, to improve
'memcache'-like workloads.
- "Age" (decay) average idle time, to better track & improve workloads
such as 'tbench'.
- Fix & improve energy-aware (EAS) balancing logic & metrics.
- Fix & improve the uclamp metrics.
- Fix task migration (taskset) corner case on !CONFIG_CPUSET.
- Fix RT and deadline utilization tracking across policy changes
- Introduce a "burstable" CFS controller via cgroups, which allows
bursty CPU-bound workloads to borrow a bit against their future
quota to improve overall latencies & batching. Can be tweaked
via /sys/fs/cgroup/cpu/<X>/cpu.cfs_burst_us.
- Rework assymetric topology/capacity detection & handling.
- Scheduler statistics & tooling:
- Disable delayacct by default, but add a sysctl to enable
it at runtime if tooling needs it. Use static keys and
other optimizations to make it more palatable.
- Use sched_clock() in delayacct, instead of ktime_get_ns().
- Misc cleanups and fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3VDr
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler udpates from Ingo Molnar:
- Changes to core scheduling facilities:
- Add "Core Scheduling" via CONFIG_SCHED_CORE=y, which enables
coordinated scheduling across SMT siblings. This is a much
requested feature for cloud computing platforms, to allow the
flexible utilization of SMT siblings, without exposing untrusted
domains to information leaks & side channels, plus to ensure more
deterministic computing performance on SMT systems used by
heterogenous workloads.
There are new prctls to set core scheduling groups, which allows
more flexible management of workloads that can share siblings.
- Fix task->state access anti-patterns that may result in missed
wakeups and rename it to ->__state in the process to catch new
abuses.
- Load-balancing changes:
- Tweak newidle_balance for fair-sched, to improve 'memcache'-like
workloads.
- "Age" (decay) average idle time, to better track & improve
workloads such as 'tbench'.
- Fix & improve energy-aware (EAS) balancing logic & metrics.
- Fix & improve the uclamp metrics.
- Fix task migration (taskset) corner case on !CONFIG_CPUSET.
- Fix RT and deadline utilization tracking across policy changes
- Introduce a "burstable" CFS controller via cgroups, which allows
bursty CPU-bound workloads to borrow a bit against their future
quota to improve overall latencies & batching. Can be tweaked via
/sys/fs/cgroup/cpu/<X>/cpu.cfs_burst_us.
- Rework assymetric topology/capacity detection & handling.
- Scheduler statistics & tooling:
- Disable delayacct by default, but add a sysctl to enable it at
runtime if tooling needs it. Use static keys and other
optimizations to make it more palatable.
- Use sched_clock() in delayacct, instead of ktime_get_ns().
- Misc cleanups and fixes.
* tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
sched/doc: Update the CPU capacity asymmetry bits
sched/topology: Rework CPU capacity asymmetry detection
sched/core: Introduce SD_ASYM_CPUCAPACITY_FULL sched_domain flag
psi: Fix race between psi_trigger_create/destroy
sched/fair: Introduce the burstable CFS controller
sched/uclamp: Fix uclamp_tg_restrict()
sched/rt: Fix Deadline utilization tracking during policy change
sched/rt: Fix RT utilization tracking during policy change
sched: Change task_struct::state
sched,arch: Remove unused TASK_STATE offsets
sched,timer: Use __set_current_state()
sched: Add get_current_state()
sched,perf,kvm: Fix preemption condition
sched: Introduce task_is_running()
sched: Unbreak wakeups
sched/fair: Age the average idle time
sched/cpufreq: Consider reduced CPU capacity in energy calculation
sched/fair: Take thermal pressure into account while estimating energy
thermal/cpufreq_cooling: Update offline CPUs per-cpu thermal_pressure
sched/fair: Return early from update_tg_cfs_load() if delta == 0
...
This reverts commits 4bad58ebc8 (and
399f8dd9a8, which tried to fix it).
I do not believe these are correct, and I'm about to release 5.13, so am
reverting them out of an abundance of caution.
The locking is odd, and appears broken.
On the allocation side (in __sigqueue_alloc()), the locking is somewhat
straightforward: it depends on sighand->siglock. Since one caller
doesn't hold that lock, it further then tests 'sigqueue_flags' to avoid
the case with no locks held.
On the freeing side (in sigqueue_cache_or_free()), there is no locking
at all, and the logic instead depends on 'current' being a single
thread, and not able to race with itself.
To make things more exciting, there's also the data race between freeing
a signal and allocating one, which is handled by using WRITE_ONCE() and
READ_ONCE(), and being mutually exclusive wrt the initial state (ie
freeing will only free if the old state was NULL, while allocating will
obviously only use the value if it was non-NULL, so only one or the
other will actually act on the value).
However, while the free->alloc paths do seem mutually exclusive thanks
to just the data value dependency, it's not clear what the memory
ordering constraints are on it. Could writes from the previous
allocation possibly be delayed and seen by the new allocation later,
causing logical inconsistencies?
So it's all very exciting and unusual.
And in particular, it seems that the freeing side is incorrect in
depending on "current" being single-threaded. Yes, 'current' is a
single thread, but in the presense of asynchronous events even a single
thread can have data races.
And such asynchronous events can and do happen, with interrupts causing
signals to be flushed and thus free'd (for example - sending a
SIGCONT/SIGSTOP can happen from interrupt context, and can flush
previously queued process control signals).
So regardless of all the other questions about the memory ordering and
locking for this new cached allocation, the sigqueue_cache_or_free()
assumptions seem to be fundamentally incorrect.
It may be that people will show me the errors of my ways, and tell me
why this is all safe after all. We can reinstate it if so. But my
current belief is that the WRITE_ONCE() that sets the cached entry needs
to be a smp_store_release(), and the READ_ONCE() that finds a cached
entry needs to be a smp_load_acquire() to handle memory ordering
correctly.
And the sequence in sigqueue_cache_or_free() would need to either use a
lock or at least be interrupt-safe some way (perhaps by using something
like the percpu 'cmpxchg': it doesn't need to be SMP-safe, but like the
percpu operations it needs to be interrupt-safe).
Fixes: 399f8dd9a8 ("signal: Prevent sigqueue caching after task got released")
Fixes: 4bad58ebc8 ("signal: Allow tasks to cache one sigqueue struct")
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
syzbot reported a memory leak related to sigqueue caching.
The assumption that a task cannot cache a sigqueue after the signal handler
has been dropped and exit_task_sigqueue_cache() has been invoked turns out
to be wrong.
Such a task can still invoke release_task(other_task), which cleans up the
signals of 'other_task' and ends up in sigqueue_cache_or_free(), which in
turn will cache the signal because task->sigqueue_cache is NULL. That's
obviously bogus because nothing will free the cached signal of that task
anymore, so the cached item is leaked.
This happens when e.g. the last non-leader thread exits and reaps the
zombie leader.
Prevent this by setting tsk::sigqueue_cache to an error pointer value in
exit_task_sigqueue_cache() which forces any subsequent invocation of
sigqueue_cache_or_free() from that task to hand the sigqueue back to the
kmemcache.
Add comments to all relevant places.
Fixes: 4bad58ebc8 ("signal: Allow tasks to cache one sigqueue struct")
Reported-by: syzbot+0bac5fec63d4f399ba98@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/878s32g6j5.ffs@nanos.tec.linutronix.de
Replace a bunch of 'p->state == TASK_RUNNING' with a new helper:
task_is_running(p).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210611082838.222401495@infradead.org
Pull siginfo fix from Eric Biederman:
"During the merge window an issue with si_perf and the siginfo ABI came
up. The alpha and sparc siginfo structure layout had changed with the
addition of SIGTRAP TRAP_PERF and the new field si_perf.
The reason only alpha and sparc were affected is that they are the
only architectures that use si_trapno.
Looking deeper it was discovered that si_trapno is used for only a few
select signals on alpha and sparc, and that none of the other
_sigfault fields past si_addr are used at all. Which means technically
no regression on alpha and sparc.
While the alignment concerns might be dismissed the abuse of si_errno
by SIGTRAP TRAP_PERF does have the potential to cause regressions in
existing userspace.
While we still have time before userspace starts using and depending
on the new definition siginfo for SIGTRAP TRAP_PERF this set of
changes cleans up siginfo_t.
- The si_trapno field is demoted from magic alpha and sparc status
and made an ordinary union member of the _sigfault member of
siginfo_t. Without moving it of course.
- si_perf is replaced with si_perf_data and si_perf_type ending the
abuse of si_errno.
- Unnecessary additions to signalfd_siginfo are removed"
* 'for-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signalfd: Remove SIL_PERF_EVENT fields from signalfd_siginfo
signal: Deliver all of the siginfo perf data in _perf
signal: Factor force_sig_perf out of perf_sigtrap
signal: Implement SIL_FAULT_TRAPNO
siginfo: Move si_trapno inside the union inside _si_fault
Now that si_trapno is part of the union in _si_fault and available on
all architectures, add SIL_FAULT_TRAPNO and update siginfo_layout to
return SIL_FAULT_TRAPNO when the code assumes si_trapno is valid.
There is room for future changes to reduce when si_trapno is valid but
this is all that is needed to make si_trapno and the other members of
the the union in _sigfault mutually exclusive.
Update the code that uses siginfo_layout to deal with SIL_FAULT_TRAPNO
and have the same code ignore si_trapno in in all other cases.
v1: https://lkml.kernel.org/r/m1o8dvs7s7.fsf_-_@fess.ebiederm.org
v2: https://lkml.kernel.org/r/20210505141101.11519-6-ebiederm@xmission.com
Link: https://lkml.kernel.org/r/20210517195748.8880-2-ebiederm@xmission.com
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
It turns out that linux uses si_trapno very sparingly, and as such it
can be considered extra information for a very narrow selection of
signals, rather than information that is present with every fault
reported in siginfo.
As such move si_trapno inside the union inside of _si_fault. This
results in no change in placement, and makes it eaiser
to extend _si_fault in the future as this reduces the number of
special cases. In particular with si_trapno included in the union it
is no longer a concern that the union must be pointer aligned on most
architectures because the union follows immediately after si_addr
which is a pointer.
This change results in a difference in siginfo field placement on
sparc and alpha for the fields si_addr_lsb, si_lower, si_upper,
si_pkey, and si_perf. These architectures do not implement the
signals that would use si_addr_lsb, si_lower, si_upper, si_pkey, and
si_perf. Further these architecture have not yet implemented the
userspace that would use si_perf.
The point of this change is in fact to correct these placement issues
before sparc or alpha grow userspace that cares. This change was
discussed[1] and the agreement is that this change is currently safe.
[1]: https://lkml.kernel.org/r/CAK8P3a0+uKYwL1NhY6Hvtieghba2hKYGD6hcKx5n8=4Gtt+pHA@mail.gmail.com
Acked-by: Marco Elver <elver@google.com>
v1: https://lkml.kernel.org/r/m1tunns7yf.fsf_-_@fess.ebiederm.org
v2: https://lkml.kernel.org/r/20210505141101.11519-5-ebiederm@xmission.com
Link: https://lkml.kernel.org/r/20210517195748.8880-1-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The rlimit counter is tied to uid in the user_namespace. This allows
rlimit values to be specified in userns even if they are already
globally exceeded by the user. However, the value of the previous
user_namespaces cannot be exceeded.
Changelog
v11:
* Revert most of changes to fix performance issues.
v10:
* Fix memory leak on get_ucounts failure.
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Link: https://lkml.kernel.org/r/df9d7764dddd50f28616b7840de74ec0f81711a8.1619094428.git.legion@kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
- Clean up SCHED_DEBUG: move the decades old mess of sysctl, procfs and debugfs interfaces
to a unified debugfs interface.
- Signals: Allow caching one sigqueue object per task, to improve performance & latencies.
- Improve newidle_balance() irq-off latencies on systems with a large number of CPU cgroups.
- Improve energy-aware scheduling
- Improve the PELT metrics for certain workloads
- Reintroduce select_idle_smt() to improve load-balancing locality - but without the previous
regressions
- Add 'scheduler latency debugging': warn after long periods of pending need_resched. This
is an opt-in feature that requires the enabling of the LATENCY_WARN scheduler feature,
or the use of the resched_latency_warn_ms=xx boot parameter.
- CPU hotplug fixes for HP-rollback, and for the 'fail' interface. Fix remaining
balance_push() vs. hotplug holes/races
- PSI fixes, plus allow /proc/pressure/ files to be written by CAP_SYS_RESOURCE tasks as well
- Fix/improve various load-balancing corner cases vs. capacity margins
- Fix sched topology on systems with NUMA diameter of 3 or above
- Fix PF_KTHREAD vs to_kthread() race
- Minor rseq optimizations
- Misc cleanups, optimizations, fixes and smaller updates
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=E7mz
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Clean up SCHED_DEBUG: move the decades old mess of sysctl, procfs and
debugfs interfaces to a unified debugfs interface.
- Signals: Allow caching one sigqueue object per task, to improve
performance & latencies.
- Improve newidle_balance() irq-off latencies on systems with a large
number of CPU cgroups.
- Improve energy-aware scheduling
- Improve the PELT metrics for certain workloads
- Reintroduce select_idle_smt() to improve load-balancing locality -
but without the previous regressions
- Add 'scheduler latency debugging': warn after long periods of pending
need_resched. This is an opt-in feature that requires the enabling of
the LATENCY_WARN scheduler feature, or the use of the
resched_latency_warn_ms=xx boot parameter.
- CPU hotplug fixes for HP-rollback, and for the 'fail' interface. Fix
remaining balance_push() vs. hotplug holes/races
- PSI fixes, plus allow /proc/pressure/ files to be written by
CAP_SYS_RESOURCE tasks as well
- Fix/improve various load-balancing corner cases vs. capacity margins
- Fix sched topology on systems with NUMA diameter of 3 or above
- Fix PF_KTHREAD vs to_kthread() race
- Minor rseq optimizations
- Misc cleanups, optimizations, fixes and smaller updates
* tag 'sched-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
cpumask/hotplug: Fix cpu_dying() state tracking
kthread: Fix PF_KTHREAD vs to_kthread() race
sched/debug: Fix cgroup_path[] serialization
sched,psi: Handle potential task count underflow bugs more gracefully
sched: Warn on long periods of pending need_resched
sched/fair: Move update_nohz_stats() to the CONFIG_NO_HZ_COMMON block to simplify the code & fix an unused function warning
sched/debug: Rename the sched_debug parameter to sched_verbose
sched,fair: Alternative sched_slice()
sched: Move /proc/sched_debug to debugfs
sched,debug: Convert sysctl sched_domains to debugfs
debugfs: Implement debugfs_create_str()
sched,preempt: Move preempt_dynamic to debug.c
sched: Move SCHED_DEBUG sysctl to debugfs
sched: Don't make LATENCYTOP select SCHED_DEBUG
sched: Remove sched_schedstats sysctl out from under SCHED_DEBUG
sched/numa: Allow runtime enabling/disabling of NUMA balance without SCHED_DEBUG
sched: Use cpu_dying() to fix balance_push vs hotplug-rollback
cpumask: Introduce DYING mask
cpumask: Make cpu_{online,possible,present,active}() inline
rseq: Optimise rseq_get_rseq_cs() and clear_rseq_cs()
...
- Improve Intel uncore PMU support:
- Parse uncore 'discovery tables' - a new hardware capability enumeration method
introduced on the latest Intel platforms. This table is in a well-defined PCI
namespace location and is read via MMIO. It is organized in an rbtree.
These uncore tables will allow the discovery of standard counter blocks, but
fancier counters still need to be enumerated explicitly.
- Add Alder Lake support
- Improve IIO stacks to PMON mapping support on Skylake servers
- Add Intel Alder Lake PMU support - which requires the introduction of 'hybrid' CPUs
and PMUs. Alder Lake is a mix of Golden Cove ('big') and Gracemont ('small' - Atom derived)
cores.
The CPU-side feature set is entirely symmetrical - but on the PMU side there's
core type dependent PMU functionality.
- Reduce data loss with CPU level hardware tracing on Intel PT / AUX profiling, by
fixing the AUX allocation watermark logic.
- Improve ring buffer allocation on NUMA systems
- Put 'struct perf_event' into their separate kmem_cache pool
- Add support for synchronous signals for select perf events. The immediate motivation
is to support low-overhead sampling-based race detection for user-space code. The
feature consists of the following main changes:
- Add thread-only event inheritance via perf_event_attr::inherit_thread, which limits
inheritance of events to CLONE_THREAD.
- Add the ability for events to not leak through exec(), via perf_event_attr::remove_on_exec.
- Allow the generation of SIGTRAP via perf_event_attr::sigtrap, extend siginfo with an u64
::si_perf, and add the breakpoint information to ::si_addr and ::si_perf if the event is
PERF_TYPE_BREAKPOINT.
The siginfo support is adequate for breakpoints right now - but the new field can be used
to introduce support for other types of metadata passed over siginfo as well.
- Misc fixes, cleanups and smaller updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NhQ7
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event updates from Ingo Molnar:
- Improve Intel uncore PMU support:
- Parse uncore 'discovery tables' - a new hardware capability
enumeration method introduced on the latest Intel platforms. This
table is in a well-defined PCI namespace location and is read via
MMIO. It is organized in an rbtree.
These uncore tables will allow the discovery of standard counter
blocks, but fancier counters still need to be enumerated
explicitly.
- Add Alder Lake support
- Improve IIO stacks to PMON mapping support on Skylake servers
- Add Intel Alder Lake PMU support - which requires the introduction of
'hybrid' CPUs and PMUs. Alder Lake is a mix of Golden Cove ('big')
and Gracemont ('small' - Atom derived) cores.
The CPU-side feature set is entirely symmetrical - but on the PMU
side there's core type dependent PMU functionality.
- Reduce data loss with CPU level hardware tracing on Intel PT / AUX
profiling, by fixing the AUX allocation watermark logic.
- Improve ring buffer allocation on NUMA systems
- Put 'struct perf_event' into their separate kmem_cache pool
- Add support for synchronous signals for select perf events. The
immediate motivation is to support low-overhead sampling-based race
detection for user-space code. The feature consists of the following
main changes:
- Add thread-only event inheritance via
perf_event_attr::inherit_thread, which limits inheritance of
events to CLONE_THREAD.
- Add the ability for events to not leak through exec(), via
perf_event_attr::remove_on_exec.
- Allow the generation of SIGTRAP via perf_event_attr::sigtrap,
extend siginfo with an u64 ::si_perf, and add the breakpoint
information to ::si_addr and ::si_perf if the event is
PERF_TYPE_BREAKPOINT.
The siginfo support is adequate for breakpoints right now - but the
new field can be used to introduce support for other types of
metadata passed over siginfo as well.
- Misc fixes, cleanups and smaller updates.
* tag 'perf-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
signal, perf: Add missing TRAP_PERF case in siginfo_layout()
signal, perf: Fix siginfo_t by avoiding u64 on 32-bit architectures
perf/x86: Allow for 8<num_fixed_counters<16
perf/x86/rapl: Add support for Intel Alder Lake
perf/x86/cstate: Add Alder Lake CPU support
perf/x86/msr: Add Alder Lake CPU support
perf/x86/intel/uncore: Add Alder Lake support
perf: Extend PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE
perf/x86/intel: Add Alder Lake Hybrid support
perf/x86: Support filter_match callback
perf/x86/intel: Add attr_update for Hybrid PMUs
perf/x86: Add structures for the attributes of Hybrid PMUs
perf/x86: Register hybrid PMUs
perf/x86: Factor out x86_pmu_show_pmu_cap
perf/x86: Remove temporary pmu assignment in event_init
perf/x86/intel: Factor out intel_pmu_check_extra_regs
perf/x86/intel: Factor out intel_pmu_check_event_constraints
perf/x86/intel: Factor out intel_pmu_check_num_counters
perf/x86: Hybrid PMU support for extra_regs
perf/x86: Hybrid PMU support for event constraints
...
-----BEGIN PGP SIGNATURE-----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=ZMd+
-----END PGP SIGNATURE-----
Merge tag 'livepatching-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching update from Petr Mladek:
- Use TIF_NOTIFY_SIGNAL infrastructure instead of the fake signal
* tag 'livepatching-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Replace the fake signal sending with TIF_NOTIFY_SIGNAL infrastructure
Add the missing TRAP_PERF case in siginfo_layout() for interpreting the
layout correctly as SIL_PERF_EVENT instead of just SIL_FAULT. This
ensures the si_perf field is copied and not just the si_addr field.
This was caught and tested by running the perf_events/sigtrap_threads
kselftest as a 32-bit binary with a 64-bit kernel.
Fixes: fb6cc127e0 ("signal: Introduce TRAP_PERF si_code and si_perf to siginfo")
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210422191823.79012-2-elver@google.com
Introduces the TRAP_PERF si_code, and associated siginfo_t field
si_perf. These will be used by the perf event subsystem to send signals
(if requested) to the task where an event occurred.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: Arnd Bergmann <arnd@arndb.de> # asm-generic
Link: https://lkml.kernel.org/r/20210408103605.1676875-6-elver@google.com
The idea for this originates from the real time tree to make signal
delivery for realtime applications more efficient. In quite some of these
application scenarios a control tasks signals workers to start their
computations. There is usually only one signal per worker on flight. This
works nicely as long as the kmem cache allocations do not hit the slow path
and cause latencies.
To cure this an optimistic caching was introduced (limited to RT tasks)
which allows a task to cache a single sigqueue in a pointer in task_struct
instead of handing it back to the kmem cache after consuming a signal. When
the next signal is sent to the task then the cached sigqueue is used
instead of allocating a new one. This solved the problem for this set of
application scenarios nicely.
The task cache is not preallocated so the first signal sent to a task goes
always to the cache allocator. The cached sigqueue stays around until the
task exits and is freed when task::sighand is dropped.
After posting this solution for mainline the discussion came up whether
this would be useful in general and should not be limited to realtime
tasks: https://lore.kernel.org/r/m11rcu7nbr.fsf@fess.ebiederm.org
One concern leading to the original limitation was to avoid a large amount
of pointlessly cached sigqueues in alive tasks. The other concern was
vs. RLIMIT_SIGPENDING as these cached sigqueues are not accounted for.
The accounting problem is real, but on the other hand slightly academic.
After gathering some statistics it turned out that after boot of a regular
distro install there are less than 10 sigqueues cached in ~1500 tasks.
In case of a 'mass fork and fire signal to child' scenario the extra 80
bytes of memory per task are well in the noise of the overall memory
consumption of the fork bomb.
If this should be limited then this would need an extra counter in struct
user, more atomic instructions and a seperate rlimit. Yet another tunable
which is mostly unused.
The caching is actually used. After boot and a full kernel compile on a
64CPU machine with make -j128 the number of 'allocations' looks like this:
From slab: 23996
From task cache: 52223
I.e. it reduces the number of slab cache operations by ~68%.
A typical pattern there is:
<...>-58490 __sigqueue_alloc: for 58488 from slab ffff8881132df460
<...>-58488 __sigqueue_free: cache ffff8881132df460
<...>-58488 __sigqueue_alloc: for 1149 from cache ffff8881103dc550
bash-1149 exit_task_sighand: free ffff8881132df460
bash-1149 __sigqueue_free: cache ffff8881103dc550
The interesting sequence is that the exiting task 58488 grabs the sigqueue
from bash's task cache to signal exit and bash sticks it back into it's own
cache. Lather, rinse and repeat.
The caching is probably not noticable for the general use case, but the
benefit for latency sensitive applications is clear. While kmem caches are
usually just serving from the fast path the slab merging (default) can
depending on the usage pattern of the merged slabs cause occasional slow
path allocations.
The time spared per cached entry is a few micro seconds per signal which is
not relevant for e.g. a kernel build, but for signal heavy workloads it's
measurable.
As there is no real downside of this caching mechanism making it
unconditionally available is preferred over more conditional code or new
magic tunables.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/87sg4lbmxo.fsf@nanos.tec.linutronix.de
There is no point in having the conditional at the callsite.
Just hand in the allocation mode flag to __sigqueue_alloc() and use it to
initialize sigqueue::flags.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210322092258.898677147@linutronix.de
Livepatch sends a fake signal to all remaining blocking tasks of a
running transition after a set period of time. It uses TIF_SIGPENDING
flag for the purpose. Commit 12db8b6900 ("entry: Add support for
TIF_NOTIFY_SIGNAL") added a generic infrastructure to achieve the same.
Replace our bespoke solution with the generic one.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit 4db4b1a0d1.
The IO threads allow and handle SIGSTOP now, so don't special case them
anymore in task_set_jobctl_pending().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 6fb8f43ced.
The IO threads do allow signals now, including SIGSTOP, and we can allow
ptrace attach. Attaching won't reveal anything interesting for the IO
threads, but it will allow eg gdb to attach to a task with io_urings
and IO threads without complaining. And once attached, it will allow
the usual introspection into regular threads.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 5be28c8f85.
IO threads now take signals just fine, so there's no reason to limit them
specifically. Revert the change that prevented that from happening.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Right now we're never calling get_signal() from PF_IO_WORKER threads, but
in preparation for doing so, don't handle a fatal signal for them. The
workers have state they need to cleanup when exiting, so just return
instead of calling do_exit() on their behalf. The threads themselves will
detect a fatal signal and do proper shutdown.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just like we don't allow normal signals to IO threads, don't deliver a
STOP to a task that has PF_IO_WORKER set. The IO threads don't take
signals in general, and have no means of flushing out a stop either.
Longer term, we may want to look into allowing stop of these threads,
as it relates to eg process freezing. For now, this prevents a spin
issue if a SIGSTOP is delivered to the parent task.
Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
They don't take signals individually, and even if they share signals with
the parent task, don't allow them to be delivered through the worker
thread. Linux does allow this kind of behavior for regular threads, but
it's really a compatability thing that we need not care about for the IO
threads.
Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYA1opwAKCRCRxhvAZXjc
osnpAP4wjExvtwgh1eA7IgBPtAFzL1EPK2lrv7WM6yuMJNh23wEAxU+quoNrBT7U
R5UQvmXi2SwxjeGXR/BTLq/HU9rSJA4=
=6YJX
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2021-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull misc fixes from Christian Brauner:
- Jann reported sparse complaints because of a missing __user
annotation in a helper we added way back when we added
pidfd_send_signal() to avoid compat syscall handling. Fix it.
- Yanfei replaces a reference in a comment to the _do_fork() helper I
removed a while ago with a reference to the new kernel_clone()
replacement
- Alexander Guril added a simple coding style fix
* tag 'for-linus-2021-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
kthread: remove comments about old _do_fork() helper
Kernel: fork.c: Fix coding style: Do not use {} around single-line statements
signal: Add missing __user annotation to copy_siginfo_from_user_any
copy_siginfo_from_user_any() takes a userspace pointer as second
argument; annotate the parameter type accordingly.
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20201207000252.138564-1-jannh@google.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Song reported a boot regression in a kvm image with 5.11-rc, and bisected
it down to the below patch. Debugging this issue, turns out that the boot
stalled when a task is waiting on a pipe being released. As we no longer
run task_work from get_signal() unless it's queued with TWA_SIGNAL, the
task goes idle without running the task_work. This prevents ->release()
from being called on the pipe, which another boot task is waiting on.
For now, re-instate the unconditional task_work run from get_signal().
For 5.12, we'll collapse TWA_RESUME and TWA_SIGNAL, as it no longer
makes sense to have a distinction between the two. This will turn
task_work notification into a simple boolean, whether to notify or not.
Fixes: 98b89b649f ("signal: kill JOBCTL_TASK_WORK")
Reported-by: Song Liu <songliubraving@fb.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang version 11.0.1
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl/YJxsQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpjpyEACBdW+YjenjTbkUPeEXzQgkBkTZUYw3g007
DPcUT1g8PQZXYXlQvBKCvGhhIr7/KVcjepKoowiNQfBNGcIPJTVopW58nzpqAfTQ
goI2WYGn5EKFFKBPvtH04cJD/Wo8muXdxynKtqyZbnGGgZjQxPrE259b8dpHjBSR
6L7HHkk0D1oU/5b6h6Ocpg9mc/0iIUCZylySAYY3eGO0JaVPJaXgZSJZYgHxCHll
Lb+/y/fXdtm/0PmQ3ko0ev54g3yEWqZIX0NsZW1asrButIy+KLzQ2Mz1xFLFDMag
prtIfwb8tzgc4dFPY090C/azjCh5CPpxqYS6FkRwS0p86n6OhkyXrqfily5Hs4/B
NC7CBPBSH/j+NKUK7CYZcpTzTpxPjUr9p0anUdlvMJz8FhTb/3YEEZ1UTeWOeHmk
Yo5SxnFghLeZZeZ1ok6rdymnVa7WEX12SCLGQX31BB2mld0tNbKb4b+FsBF6OUMk
IUaX6OjwDFVRaysC88BQ4hjcIP1HxsViG4/VZDX15gjAAH2Pvb+7tev+lcDcOhjz
TCD4GNFspTFzRhh9nT7oxQ679qCh9G9zHbzuIRewnrS6iqvo5SJQB3dR2yrWZRRH
ySkQFiHpYOlnLJYv0jg9COlGwo2FUdcvKhCvkjQKKBz48rzW/IC0LwKdRQWZDFk3
FKGzP/NBig==
=cadT
-----END PGP SIGNATURE-----
Merge tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block
Pull TIF_NOTIFY_SIGNAL updates from Jens Axboe:
"This sits on top of of the core entry/exit and x86 entry branch from
the tip tree, which contains the generic and x86 parts of this work.
Here we convert the rest of the archs to support TIF_NOTIFY_SIGNAL.
With that done, we can get rid of JOBCTL_TASK_WORK from task_work and
signal.c, and also remove a deadlock work-around in io_uring around
knowing that signal based task_work waking is invoked with the sighand
wait queue head lock.
The motivation for this work is to decouple signal notify based
task_work, of which io_uring is a heavy user of, from sighand. The
sighand lock becomes a huge contention point, particularly for
threaded workloads where it's shared between threads. Even outside of
threaded applications it's slower than it needs to be.
Roman Gershman <romger@amazon.com> reported that his networked
workload dropped from 1.6M QPS at 80% CPU to 1.0M QPS at 100% CPU
after io_uring was changed to use TIF_NOTIFY_SIGNAL. The time was all
spent hammering on the sighand lock, showing 57% of the CPU time there
[1].
There are further cleanups possible on top of this. One example is
TIF_PATCH_PENDING, where a patch already exists to use
TIF_NOTIFY_SIGNAL instead. Hopefully this will also lead to more
consolidation, but the work stands on its own as well"
[1] https://github.com/axboe/liburing/issues/215
* tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block: (28 commits)
io_uring: remove 'twa_signal_ok' deadlock work-around
kernel: remove checking for TIF_NOTIFY_SIGNAL
signal: kill JOBCTL_TASK_WORK
io_uring: JOBCTL_TASK_WORK is no longer used by task_work
task_work: remove legacy TWA_SIGNAL path
sparc: add support for TIF_NOTIFY_SIGNAL
riscv: add support for TIF_NOTIFY_SIGNAL
nds32: add support for TIF_NOTIFY_SIGNAL
ia64: add support for TIF_NOTIFY_SIGNAL
h8300: add support for TIF_NOTIFY_SIGNAL
c6x: add support for TIF_NOTIFY_SIGNAL
alpha: add support for TIF_NOTIFY_SIGNAL
xtensa: add support for TIF_NOTIFY_SIGNAL
arm: add support for TIF_NOTIFY_SIGNAL
microblaze: add support for TIF_NOTIFY_SIGNAL
hexagon: add support for TIF_NOTIFY_SIGNAL
csky: add support for TIF_NOTIFY_SIGNAL
openrisc: add support for TIF_NOTIFY_SIGNAL
sh: add support for TIF_NOTIFY_SIGNAL
um: add support for TIF_NOTIFY_SIGNAL
...
- More generalization of entry/exit functionality
- The consolidation work to reclaim TIF flags on x86 and also for non-x86
specific TIF flags which are solely relevant for syscall related work
and have been moved into their own storage space. The x86 specific part
had to be merged in to avoid a major conflict.
- The TIF_NOTIFY_SIGNAL work which replaces the inefficient signal
delivery mode of task work and results in an impressive performance
improvement for io_uring. The non-x86 consolidation of this is going to
come seperate via Jens.
- The selective syscall redirection facility which provides a clean and
efficient way to support the non-Linux syscalls of WINE by catching them
at syscall entry and redirecting them to the user space emulation. This
can be utilized for other purposes as well and has been designed
carefully to avoid overhead for the regular fastpath. This includes the
core changes and the x86 support code.
- Simplification of the context tracking entry/exit handling for the users
of the generic entry code which guarantee the proper ordering and
protection.
- Preparatory changes to make the generic entry code accomodate S390
specific requirements which are mostly related to their syscall restart
mechanism.
-----BEGIN PGP SIGNATURE-----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=hsjV
-----END PGP SIGNATURE-----
Merge tag 'core-entry-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core entry/exit updates from Thomas Gleixner:
"A set of updates for entry/exit handling:
- More generalization of entry/exit functionality
- The consolidation work to reclaim TIF flags on x86 and also for
non-x86 specific TIF flags which are solely relevant for syscall
related work and have been moved into their own storage space. The
x86 specific part had to be merged in to avoid a major conflict.
- The TIF_NOTIFY_SIGNAL work which replaces the inefficient signal
delivery mode of task work and results in an impressive performance
improvement for io_uring. The non-x86 consolidation of this is
going to come seperate via Jens.
- The selective syscall redirection facility which provides a clean
and efficient way to support the non-Linux syscalls of WINE by
catching them at syscall entry and redirecting them to the user
space emulation. This can be utilized for other purposes as well
and has been designed carefully to avoid overhead for the regular
fastpath. This includes the core changes and the x86 support code.
- Simplification of the context tracking entry/exit handling for the
users of the generic entry code which guarantee the proper ordering
and protection.
- Preparatory changes to make the generic entry code accomodate S390
specific requirements which are mostly related to their syscall
restart mechanism"
* tag 'core-entry-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
entry: Add syscall_exit_to_user_mode_work()
entry: Add exit_to_user_mode() wrapper
entry_Add_enter_from_user_mode_wrapper
entry: Rename exit_to_user_mode()
entry: Rename enter_from_user_mode()
docs: Document Syscall User Dispatch
selftests: Add benchmark for syscall user dispatch
selftests: Add kselftest for syscall user dispatch
entry: Support Syscall User Dispatch on common syscall entry
kernel: Implement selective syscall userspace redirection
signal: Expose SYS_USER_DISPATCH si_code type
x86: vdso: Expose sigreturn address on vdso to the kernel
MAINTAINERS: Add entry for common entry code
entry: Fix boot for !CONFIG_GENERIC_ENTRY
x86: Support HAVE_CONTEXT_TRACKING_OFFSTACK
context_tracking: Only define schedule_user() on !HAVE_CONTEXT_TRACKING_OFFSTACK archs
sched: Detect call to schedule from critical entry code
context_tracking: Don't implement exception_enter/exit() on CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK
context_tracking: Introduce HAVE_CONTEXT_TRACKING_OFFSTACK
x86: Reclaim unused x86 TI flags
...
Architectures that support address tagging, such as arm64, may want to
expose fault address tag bits to the signal handler to help diagnose
memory errors. However, these bits have not been previously set,
and their presence may confuse unaware user applications. Therefore,
introduce a SA_EXPOSE_TAGBITS flag bit in sa_flags that a signal
handler may use to explicitly request that the bits are set.
The generic signal handler APIs expect to receive tagged addresses.
Architectures may specify how to untag addresses in the case where
SA_EXPOSE_TAGBITS is clear by defining the arch_untagged_si_addr
function.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://linux-review.googlesource.com/id/I16dd0ed2081f091fce97be0190cb8caa874c26cb
Link: https://lkml.kernel.org/r/13cf24d00ebdd8e1f55caf1821c7c29d54100191.1605904350.git.pcc@google.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Define a sa_flags bit, SA_UNSUPPORTED, which will never be supported
in the uapi. The purpose of this flag bit is to allow userspace to
distinguish an old kernel that does not clear unknown sa_flags bits
from a kernel that supports every flag bit.
In other words, if userspace does something like:
act.sa_flags |= SA_UNSUPPORTED;
sigaction(SIGSEGV, &act, 0);
sigaction(SIGSEGV, 0, &oldact);
and finds that SA_UNSUPPORTED remains set in oldact.sa_flags, it means
that the kernel cannot be trusted to have cleared unknown flag bits
from sa_flags, so no assumptions about flag bit support can be made.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://linux-review.googlesource.com/id/Ic2501ad150a3a79c1cf27fb8c99be342e9dffbcb
Link: https://lkml.kernel.org/r/bda7ddff8895a9bc4ffc5f3cf3d4d37a32118077.1605582887.git.pcc@google.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Previously we were not clearing non-uapi flag bits in
sigaction.sa_flags when storing the userspace-provided sa_flags or
when returning them via oldact. Start doing so.
This allows userspace to detect missing support for flag bits and
allows the kernel to use non-uapi bits internally, as we are already
doing in arch/x86 for two flag bits. Now that this change is in
place, we no longer need the code in arch/x86 that was hiding these
bits from userspace, so remove it.
This is technically a userspace-visible behavior change for sigaction, as
the unknown bits returned via oldact.sa_flags are no longer set. However,
we are free to define the behavior for unknown bits exactly because
their behavior is currently undefined, so for now we can define the
meaning of each of them to be "clear the bit in oldact.sa_flags unless
the bit becomes known in the future". Furthermore, this behavior is
consistent with OpenBSD [1], illumos [2] and XNU [3] (FreeBSD [4] and
NetBSD [5] fail the syscall if unknown bits are set). So there is some
precedent for this behavior in other kernels, and in particular in XNU,
which is probably the most popular kernel among those that I looked at,
which means that this change is less likely to be a compatibility issue.
Link: [1] f634a6a4b5/sys/kern/kern_sig.c (L278)
Link: [2] 76f19f5fdc/usr/src/uts/common/syscall/sigaction.c (L86)
Link: [3] a449c6a3b8/bsd/kern/kern_sig.c (L480)
Link: [4] eded70c370/sys/kern/kern_sig.c (L699)
Link: [5] 3365779bec/sys/kern/sys_sig.c (L473)
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://linux-review.googlesource.com/id/I35aab6f5be932505d90f3b3450c083b4db1eca86
Link: https://lkml.kernel.org/r/878dbcb5f47bc9b11881c81f745c0bef5c23f97f.1605235762.git.pcc@google.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=SPWC
-----END PGP SIGNATURE-----
Merge tag 'core-entry-notify-signal' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into tif-task_work.arch
Core changes to support TASK_NOTIFY_SIGNAL
* tag 'core-entry-notify-signal' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
task_work: Use TIF_NOTIFY_SIGNAL if available
entry: Add support for TIF_NOTIFY_SIGNAL
signal: Add task_sigpending() helper
This testcase
#include <stdio.h>
#include <unistd.h>
#include <signal.h>
#include <sys/ptrace.h>
#include <sys/wait.h>
#include <pthread.h>
#include <assert.h>
void *tf(void *arg)
{
return NULL;
}
int main(void)
{
int pid = fork();
if (!pid) {
kill(getpid(), SIGSTOP);
pthread_t th;
pthread_create(&th, NULL, tf, NULL);
return 0;
}
waitpid(pid, NULL, WSTOPPED);
ptrace(PTRACE_SEIZE, pid, 0, PTRACE_O_TRACECLONE);
waitpid(pid, NULL, 0);
ptrace(PTRACE_CONT, pid, 0,0);
waitpid(pid, NULL, 0);
int status;
int thread = waitpid(-1, &status, 0);
assert(thread > 0 && thread != pid);
assert(status == 0x80137f);
return 0;
}
fails and triggers WARN_ON_ONCE(!signr) in do_jobctl_trap().
This is because task_join_group_stop() has 2 problems when current is traced:
1. We can't rely on the "JOBCTL_STOP_PENDING" check, a stopped tracee
can be woken up by debugger and it can clone another thread which
should join the group-stop.
We need to check group_stop_count || SIGNAL_STOP_STOPPED.
2. If SIGNAL_STOP_STOPPED is already set, we should not increment
sig->group_stop_count and add JOBCTL_STOP_CONSUME. The new thread
should stop without another do_notify_parent_cldstop() report.
To clarify, the problem is very old and we should blame
ptrace_init_task(). But now that we have task_join_group_stop() it makes
more sense to fix this helper to avoid the code duplication.
Reported-by: syzbot+3485e3773f7da290eecc@syzkaller.appspotmail.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christian Brauner <christian@brauner.io>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201019134237.GA18810@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add TIF_NOTIFY_SIGNAL handling in the generic entry code, which if set,
will return true if signal_pending() is used in a wait loop. That causes an
exit of the loop so that notify_signal tracehooks can be run. If the wait
loop is currently inside a system call, the system call is restarted once
task_work has been processed.
In preparation for only having arch_do_signal() handle syscall restarts if
_TIF_SIGPENDING isn't set, rename it to arch_do_signal_or_restart(). Pass
in a boolean that tells the architecture specific signal handler if it
should attempt to get a signal, or just process a potential syscall
restart.
For !CONFIG_GENERIC_ENTRY archs, add the TIF_NOTIFY_SIGNAL handling to
get_signal(). This is done to minimize the needed architecture changes to
support this feature.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20201026203230.386348-3-axboe@kernel.dk
This is in preparation for maintaining signal_pending() as the decider of
whether or not a schedule() loop should be broken, or continue sleeping.
This is different than the core signal use cases, which really need to know
whether an actual signal is pending or not. task_sigpending() returns
non-zero if TIF_SIGPENDING is set.
Only core kernel use cases should care about the distinction between
the two, make sure those use the task_sigpending() helper.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20201026203230.386348-2-axboe@kernel.dk
If JOBCTL_TASK_WORK is already set on the targeted task, then we need
not go through {lock,unlock}_task_sighand() to set it again and queue
a signal wakeup. This is safe as we're checking it _after_ adding the
new task_work with cmpxchg().
The ordering is as follows:
task_work_add() get_signal()
--------------------------------------------------------------
STORE(task->task_works, new_work); STORE(task->jobctl);
mb(); mb();
LOAD(task->jobctl); LOAD(task->task_works);
This speeds up TWA_SIGNAL handling quite a bit, which is important now
that io_uring is relying on it for all task_work deliveries.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jann Horn <jannh@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
So that the target task will exit the wait_event_interruptible-like
loop and call task_work_run() asap.
The patch turns "bool notify" into 0,TWA_RESUME,TWA_SIGNAL enum, the
new TWA_SIGNAL flag implies signal_wake_up(). However, it needs to
avoid the race with recalc_sigpending(), so the patch also adds the
new JOBCTL_TASK_WORK bit included in JOBCTL_PENDING_MASK.
TODO: once this patch is merged we need to change all current users
of task_work_add(notify = true) to use TWA_RESUME.
Cc: stable@vger.kernel.org # v5.7
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull uaccess/coredump updates from Al Viro:
"set_fs() removal in coredump-related area - mostly Christoph's
stuff..."
* 'work.set_fs-exec' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
binfmt_elf_fdpic: remove the set_fs(KERNEL_DS) in elf_fdpic_core_dump
binfmt_elf: remove the set_fs(KERNEL_DS) in elf_core_dump
binfmt_elf: remove the set_fs in fill_siginfo_note
signal: refactor copy_siginfo_to_user32
powerpc/spufs: simplify spufs core dumping
powerpc/spufs: stop using access_ok
powerpc/spufs: fix copy_to_user while atomic
