Use task_work_pending() as a better test for whether we have task_work
or not, TIF_NOTIFY_SIGNAL is only valid if the any of the task_work
items had been queued with TWA_SIGNAL as the notification mechanism.
Hence task_work_pending() is a more reliable check.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_kill_timeouts() doesn't post any events but queues everything to
task_work. Locking there is needed for protecting linked requests
traversing, we should grab completion_lock directly instead of using
io_cq_[un]lock helpers. Same goes for __io_req_find_next_prep().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/88e75d481a65dc295cb59722bb1cf76402d1c06b.1670002973.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
->task_complete was added to serialised CQE posting by doing it from
the task context only (or fallback wq when the task is dead), and now we
can use that to avoid taking ->completion_lock while filling CQ entries.
The patch skips spinlocking only in two spots,
__io_submit_flush_completions() and flushing in io_aux_cqe, it's safer
and covers all cases we care about. Extra care is taken to force taking
the lock while queueing overflow entries.
It fundamentally relies on SINGLE_ISSUER to have only one task posting
events. It also need to take into account overflowed CQEs, flushing of
which happens in the cq wait path, and so this implementation also needs
DEFER_TASKRUN to limit waiters. For the same reason we disable it for
SQPOLL, and for IOPOLL as it won't benefit from it in any case.
DEFER_TASKRUN, SQPOLL and IOPOLL requirement may be relaxed in the
future.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2a8c91fd82cfcdcc1d2e5bac7051fe2c183bda73.1670384893.git.asml.silence@gmail.com
[axboe: modify to apply]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is one newly added place when we lock ring with io_cq_lock() but
unlocking is hand coded calling spin_unlock directly. It's ugly and
troublesome in the long run. Make it consistent with the other completion
locking.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4ca4f0564492b90214a190cd5b2a6c76522de138.1669821213.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With how task_work is added and signaled, we can have TIF_NOTIFY_SIGNAL
set and no task_work pending as it got run in a previous loop. Treat
TIF_NOTIFY_SIGNAL like get_signal(), always clear it if set regardless
of whether or not task_work is pending to run.
Cc: stable@vger.kernel.org
Fixes: 46a525e199 ("io_uring: don't gate task_work run on TIF_NOTIFY_SIGNAL")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only call sites which would not allow overflow are also call sites
which would use the io_aux_cqe as they care about ordering.
So remove this parameter from io_post_aux_cqe.
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221124093559.3780686-9-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the just introduced deferred post cqe completion state when possible
in io_aux_cqe. If not possible fallback to io_post_aux_cqe.
This introduces a complication because of allow_overflow. For deferred
completions we cannot know without locking the completion_lock if it will
overflow (and even if we locked it, another post could sneak in and cause
this cqe to be in overflow).
However since overflow protection is mostly a best effort defence in depth
to prevent infinite loops of CQEs for poll, just checking the overflow bit
is going to be good enough and will result in at most 16 (array size of
deferred cqes) overflows.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221124093559.3780686-6-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All failures happen under lock now, and can be deferred. To be consistent
when the failure has happened after some multishot cqe has been
deferred (and keep ordering), always defer failures.
To make this obvious at the caller (and to help prevent a future bug)
rename io_req_complete_failed to io_req_defer_failed.
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221124093559.3780686-4-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass in EPOLL_URING_WAKE when signaling eventfd or doing poll related
wakups, so that we can check for a circular event dependency between
eventfd and epoll. If this flag is set when our wakeup handlers are
called, then we know we have a dependency that needs to terminate
multishot requests.
eventfd and epoll are the only such possible dependencies.
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__io_req_task_work_add() is huge but marked inline, that makes compilers
to generate lots of garbage. Inline the wrapper caller
io_req_task_work_add() instead.
before and after:
text data bss dec hex filename
47347 16248 8 63603 f873 io_uring/io_uring.o
text data bss dec hex filename
45303 16248 8 61559 f077 io_uring/io_uring.o
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/26dc8c28ca0160e3269ef3e55c5a8b917c4d4450.1668162751.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Having REQ_F_POLLED set doesn't guarantee that the request is
executed as a multishot from the polling path. Fortunately for us, if
the code thinks it's multishot issue when it's not, it can only ask to
skip completion so leaking the request. Use issue_flags to mark
multipoll issues.
Cc: stable@vger.kernel.org
Fixes: 390ed29b5e ("io_uring: add IORING_ACCEPT_MULTISHOT for accept")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7700ac57653f2823e30b34dc74da68678c0c5f13.1668710222.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is possible for tw to lock the ring, and this was not propogated out to
io_run_local_work. This can cause an unlock to be missed.
Instead pass a pointer to locked into __io_run_local_work.
Fixes: 8ac5d85a89 ("io_uring: add local task_work run helper that is entered locked")
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221027144429.3971400-3-dylany@meta.com
[axboe: WARN_ON() -> WARN_ON_ONCE() and add a minor comment]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Running local task_work requires taking uring_lock, for submit + wait we
can try to run them right after submit while we still hold the lock and
save one lock/unlokc pair. The optimisation was implemented in the first
local tw patches but got dropped for simplicity.
Suggested-by: Dylan Yudaken <dylany@fb.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/281fc79d98b5d91fe4778c5137a17a2ab4693e5c.1665088876.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_cqring_wake() needs a barrier for the waitqueue_active() check.
However, in the case of io_req_local_work_add(), we call llist_add()
first, which implies an atomic. Hence we can replace smb_mb() with
smp_mb__after_atomic().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/43983bc8bc507172adda7a0f00cab1aff09fd238.1665018309.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This isn't a reliable mechanism to tell if we have task_work pending, we
really should be looking at whether we have any items queued. This is
problematic if forward progress is gated on running said task_work. One
such example is reading from a pipe, where the write side has been closed
right before the read is started. The fput() of the file queues TWA_RESUME
task_work, and we need that task_work to be run before ->release() is
called for the pipe. If ->release() isn't called, then the read will sit
forever waiting on data that will never arise.
Fix this by io_run_task_work() so it checks if we have task_work pending
rather than rely on TIF_NOTIFY_SIGNAL for that. The latter obviously
doesn't work for task_work that is queued without TWA_SIGNAL.
Reported-by: Christiano Haesbaert <haesbaert@haesbaert.org>
Cc: stable@vger.kernel.org
Link: https://github.com/axboe/liburing/issues/665
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Overflowing CQEs may result in reordering, which is buggy in case of
links, F_MORE and so on. If we guarantee that we don't reorder for
the unlikely event of a CQ ring overflow, then we can further extend
this to not have to terminate multishot requests if it happens. For
other operations, like zerocopy sends, we have no choice but to honor
CQE ordering.
Reported-by: Dylan Yudaken <dylany@fb.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ec3bc55687b0768bbe20fb62d7d06cfced7d7e70.1663892031.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We try to restrict CQ waiters when IORING_SETUP_DEFER_TASKRUN is set,
but if nothing has been submitted yet it'll allow any waiter, which
violates the contract.
Fixes: c0e0d6ba25 ("io_uring: add IORING_SETUP_DEFER_TASKRUN")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/b4f0d3f14236d7059d08c5abe2661ef0b78b5528.1662652536.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In case of DEFER_TASK_WORK we try to restrict waiters to only one task,
which is also the only submitter; however, we don't do it reliably,
which might be very confusing and backfire in the future. E.g. we
currently allow multiple tasks in io_iopoll_check().
Fixes: c0e0d6ba25 ("io_uring: add IORING_SETUP_DEFER_TASKRUN")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/94c83c0a7fe468260ee2ec31bdb0095d6e874ba2.1662652536.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Combine the two checks we have for task_work running and whether or not
we need to shuffle the mutex into one, so we unify how task_work is run
in the iopoll loop. This helps ensure that local task_work is run when
needed, and also optimizes that path to avoid a mutex shuffle if it's
not needed.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have a few spots that drop the mutex just to run local task_work,
which immediately tries to grab it again. Add a helper that just passes
in whether we're locked already.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allow deferring async tasks until the user calls io_uring_enter(2) with
the IORING_ENTER_GETEVENTS flag. Enable this mode with a flag at
io_uring_setup time. This functionality requires that the later
io_uring_enter will be called from the same submission task, and therefore
restrict this flag to work only when IORING_SETUP_SINGLE_ISSUER is also
set.
Being able to hand pick when tasks are run prevents the problem where
there is current work to be done, however task work runs anyway.
For example, a common workload would obtain a batch of CQEs, and process
each one. Interrupting this to additional taskwork would add latency but
not gain anything. If instead task work is deferred to just before more
CQEs are obtained then no additional latency is added.
The way this is implemented is by trying to keep task work local to a
io_ring_ctx, rather than to the submission task. This is required, as the
application will want to wake up only a single io_ring_ctx at a time to
process work, and so the lists of work have to be kept separate.
This has some other benefits like not having to check the task continually
in handle_tw_list (and potentially unlocking/locking those), and reducing
locks in the submit & process completions path.
There are networking cases where using this option can reduce request
latency by 50%. For example a contrived example using [1] where the client
sends 2k data and receives the same data back while doing some system
calls (to trigger task work) shows this reduction. The reason ends up
being that if sending responses is delayed by processing task work, then
the client side sits idle. Whereas reordering the sends first means that
the client runs it's workload in parallel with the local task work.
[1]:
Using https://github.com/DylanZA/netbench/tree/defer_run
Client:
./netbench --client_only 1 --control_port 10000 --host <host> --tx "epoll --threads 16 --per_thread 1 --size 2048 --resp 2048 --workload 1000"
Server:
./netbench --server_only 1 --control_port 10000 --rx "io_uring --defer_taskrun 0 --workload 100" --rx "io_uring --defer_taskrun 1 --workload 100"
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220830125013.570060-5-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add internal part of send zerocopy notifications. There are two main
structures, the first one is struct io_notif, which carries inside
struct ubuf_info and maps 1:1 to it. io_uring will be binding a number
of zerocopy send requests to it and ask to complete (aka flush) it. When
flushed and all attached requests and skbs complete, it'll generate one
and only one CQE. There are intended to be passed into the network layer
as struct msghdr::msg_ubuf.
The second concept is notification slots. The userspace will be able to
register an array of slots and subsequently addressing them by the index
in the array. Slots are independent of each other. Each slot can have
only one notifier at a time (called active notifier) but many notifiers
during the lifetime. When active, a notifier not going to post any
completion but the userspace can attach requests to it by specifying
the corresponding slot while issueing send zc requests. Eventually, the
userspace will want to "flush" the notifier losing any way to attach
new requests to it, however it can use the next atomatically added
notifier of this slot or of any other slot.
When the network layer is done with all enqueued skbs attached to a
notifier and doesn't need the specified in them user data, the flushed
notifier will post a CQE.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3ecf54c31a85762bf679b0a432c9f43ecf7e61cc.1657643355.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we're offloading requests directly to io-wq because IOSQE_ASYNC was
set in the sqe, we can miss hashing writes appropriately because we
haven't set REQ_F_ISREG yet. This can cause a performance regression
with buffered writes, as io-wq then no longer correctly serializes writes
to that file.
Ensure that we set the flags in io_prep_async_work(), which will cause
the io-wq work item to be hashed appropriately.
Fixes: 584b0180f0 ("io_uring: move read/write file prep state into actual opcode handler")
Link: https://lore.kernel.org/io-uring/20220608080054.GB22428@xsang-OptiPlex-9020/
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In overflow we see a duplcate line in the trace, and in some cases 3
lines (if initial io_post_aux_cqe fails).
Instead just trace once for each CQE
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220630091231.1456789-13-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some use cases of io_post_aux_cqe would not want to overflow as is, but
might want to change the flags/result. For example multishot receive
requires in order CQE, and so if there is an overflow it would need to
stop receiving until the overflow is taken care of.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220630091231.1456789-8-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For multishot we want a way to signal the caller that multishot has ended
but also this might not be an error return.
For example sockets return 0 when closed, which should end a multishot
recv, but still have a CQE with result 0
Introduce IOU_STOP_MULTISHOT which does this and indicates that the return
code is stored inside req->cqe
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220630091231.1456789-7-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This optimisation has some built in assumptions that make it easy to
introduce bugs. It also does not have clear wins that make it worth keeping.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220622134028.2013417-2-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since SQPOLL now uses TWA_SIGNAL_NO_IPI, there won't be task work items
without TIF_NOTIFY_SIGNAL. Simplify io_run_task_work() by removing
task->task_works check. Even though looks it doesn't cause extra cache
bouncing, it's still nice to not touch it an extra time when it might be
not cached.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/75d4f34b0c671075892821a409e28da6cb1d64fe.1655802465.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
spin_lock(&ctx->completion_lock);
/* post CQEs */
io_commit_cqring(ctx);
spin_unlock(&ctx->completion_lock);
io_cqring_ev_posted(ctx);
We have many places repeating this sequence, and the three function
unlock section is not perfect from the maintainance perspective and also
makes it harder to add new locking/sync trick.
Introduce two helpers. io_cq_lock(), which is simple and only grabs
->completion_lock, and io_cq_unlock_post() encapsulating the three call
section.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/fe0c682bf7f7b55d9be55b0d034be9c1949277dc.1655684496.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's not clear how widely used IOSQE_CQE_SKIP_SUCCESS is, and how often
->flush_cqes flag prevents from completion being flushed. Sometimes it's
high level of concurrency that enables it at least for one CQE, but
sometimes it doesn't save much because nobody waiting on the CQ.
Remove ->flush_cqes flag and the optimisation, it should benefit the
normal use case. Note, that there is no spurious eventfd problem with
that as checks for spuriousness were incorporated into
io_eventfd_signal().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/692e81eeddccc096f449a7960365fa7b4a18f8e6.1655637157.git.asml.silence@gmail.com
[axboe: remove now dead state->flush_cqes variable]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__io_fill_cqe_req() is hot and inlined, we want it to be as small as
possible. Add io_req_cqe_overflow() accepting only a request and doing
all overflow accounting, and replace with it two calls to 6 argument
io_cqring_event_overflow().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/048b9fbcce56814d77a1a540409c98c3d383edcb.1655455613.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
REQ_F_COMPLETE_INLINE is only needed to delay queueing into the
completion list to io_queue_sqe() as __io_req_complete() is inlined and
we don't want to bloat the kernel.
As now we complete in a more centralised fashion in io_issue_sqe() we
can get rid of the flag and queue to the list directly.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/600ba20a9338b8a39b249b23d3d177803613dde4.1655371007.git.asml.silence@gmail.com
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This also helps cleanup the io_uring.h cancel parts, as we can make
things static in the cancel.c file, mostly.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a io_poll_issue() rather than export the general task_work locking
and io_issue_sqe(), and put the io_op_defs definition and structure into
a separate header file so that poll can use it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Normally request handlers complete requests themselves, if they don't
return an error. For the latter case, the core will complete it for
them.
This is unhandy for pushing opcode handlers further out, as we don't
want a bunch of inline completion code and we don't want to make the
completion path slower than it is now.
Let the core handle any completion, unless the handler explicitly
asks us not to.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
