Once command submission failed due to userptr invalidation in
amdgpu_cs_submit, legacy code will perform cleanup of scheduler
job. However, it's not needed at all, as former commit has integrated
job cleanup stuff into amdgpu_job_free. Otherwise, because of double
free, a NULL pointer dereference will occur in such scenario.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2457
Fixes: f7d66fb2ea ("drm/amdgpu: cleanup scheduler job initialization v2")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Reading pipe_fuses from register may have invalid bits set, which may
affect the num_pipes erroneously.
[How]
Add read_pipes_fuses() call and filter bits based on expected number
of pipes.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
[Why & How]
Previous Z8 watermark values were causing flickering and OTC underflow.
Updating Z8 watermark values based on the measurement.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This WPTR_POLL_ENABLE is a hardware contigious polling which will cause
FCLK and UCLK to keep on a high level.
Mostly its case can be covered by F32_WPTR_POLL_ENABLE which polls by
firmware.
So to save power, SR-IOV also needs to disable this bit
Signed-off-by: Horace Chen <horace.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mgr->ctx_handles should be protected by mgr->lock.
v2: improve commit message
v3: add a Fixes tag
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: 52c6a62c64 ("drm/amdgpu: add interface for editing a foreign process's priority v3")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As made mention of in commit 08c677cb0b ("drm/amdgpu: fix
amdgpu_irq_put call trace in gmc_v10_0_hw_fini") and commit 13af556104
("drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini"). It
is meaningless to call amdgpu_irq_put() for gmc.ecc_irq. So, remove it
from gmc_v9_0_hw_fini().
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes: 3029c855d79f ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
The selfring doorbell aperture will change when resize FB
BAR successfully during gmc sw init, we should reorder
the sequence of enabling doorbell selfring aperture.
[How]
Move enable_doorbell_selfring_aperture from *_common_hw_init
to *_common_late_init.
This fixes the potential issue that GPU ring its own
doorbell when this device is in translated mode when
iommu is on.
v2: Remove *_enable_doorbell_aperture functions (Christian)
v3: Add comments to note that why we need enable doorbell
selfring late (Christian)
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Christian K�nig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before this change, sienna_cichlid_get_reset_handler will always
return NULL, although the module parameter reset_method is 3
when loading amdgpu driver.
Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The intel_dsi_msleep() helper skips sleeping if the MIPI-sequences have
a version of 3 or newer and the panel is in vid-mode.
This is based on the big comment around line 730 which starts with
"Panel enable/disable sequences from the VBT spec.", where
the "v3 video mode seq" column does not have any wait t# entries.
Checking the Windows driver shows that it does always honor
the VBT delays independent of the version of the VBT sequences.
Commit 6fdb335f1c ("drm/i915/dsi: Use unconditional msleep for
the panel_on_delay when there is no reset-deassert MIPI-sequence")
switched to a direct msleep() instead of intel_dsi_msleep()
when there is no MIPI_SEQ_DEASSERT_RESET sequence, to fix
the panel on an Acer Aspire Switch 10 E SW3-016 not turning on.
And now testing on a Nextbook Ares 8A shows that panel_on_delay
must always be honored otherwise the panel will not turn on.
Instead of only always using regular msleep() for panel_on_delay
do as Windows does and always use regular msleep() everywhere
were intel_dsi_msleep() is used and drop the intel_dsi_msleep()
helper.
Changes in v2:
- Replace all intel_dsi_msleep() calls instead of just
the intel_dsi_msleep(panel_on_delay) call
Cc: stable@vger.kernel.org
Fixes: 6fdb335f1c ("drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230425194441.68086-1-hdegoede@redhat.com
(cherry picked from commit fa83c12132)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
CPU transcoder mask is used to iterate over the available
CPU transcoders in the macro for_each_cpu_transcoder().
The macro is broken on MTL and got highlighted when audio
state was being tracked for each transcoder added in [1].
Add the missing CPU transcoder mask which is similar to ADL-P
mask but without DSI transcoders.
[1]: https://patchwork.freedesktop.org/patch/523723/
Fixes: 7835303982 ("drm/i915/mtl: Add MeteorLake PCI IDs")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Acked-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420221248.2511314-1-radhakrishna.sripada@intel.com
(cherry picked from commit bddc18913b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Dan Carpenter pointed out that 'err' was not being set in the case
where the GuC firmware version range check fails. Fix that.
Note that while this is a bug fix for a previous patch (see Fixes tag
below). It is an exceedingly low risk bug. The range check is
asserting that the GuC firmware version is within spec. So it should
not be possible to ever have a firmware file that fails this check. If
larger version numbers are required in the future, that would be a
backwards breaking spec change and thus require a major version bump,
in which case an old i915 driver would not load that new version anyway.
Fixes: 9bbba0667f ("drm/i915/guc: Use GuC submission API version number")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230421224742.2357198-1-John.C.Harrison@Intel.com
(cherry picked from commit 80ab317990)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[Why & How]
Per HW team request, we're lowering the minimum Z8
residency time to 2000us. This enables Z8 support for additional
modes we were previously blocking like 2k>60hz
Cc: stable@vger.kernel.org
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, on a handful of ASICs. We allow the framebuffer for a given
plane to exist in either VRAM or GTT. However, if the plane's new
framebuffer is in a different memory domain than it's previous
framebuffer, flipping between them can cause the screen to flicker. So,
to fix this, don't perform an immediate flip in the aforementioned case.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Reviewed-by: Roman Li <Roman.Li@amd.com>
Fixes: 81d0bcf990 ("drm/amdgpu: make display pinning more flexible (v2)")
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add min_width, min_height fields to dc_plane_cap structure. Set values
to 16x16 for discrete ASICs, and 64x64 for others.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
There's no need to clear GPINT register for DMUB
when releasing it from reset. Fix that.
Fixes: ac2e555e0a ("drm/amd/display: Add DMCUB source files and changes for DCN32/321")
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Since the variable fpu_recursion_depth is per-CPU type, it has one copy
on each CPU, thread migration causes data consistency issue, then the
call trace shows up. And preemption disabling can't prevent migration.
[how]
Disable migration to ensure consistency of fpu_recursion_depth.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Remove incorrect early return in a device specific fifo reset workaround
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
We were not returning -EINVAL on DSC atomic check fail. Add it.
Fixes: 71be4b16d3 ("drm/amd/display: dsc validate fail not pass to atomic check")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The eDP retrain will cause the DPCD 300 to be reset to default.
And cause the brightness can't be set correctly.
[How]
delete the call to edp panel power control in both
enable_link_output/disable_link_output entirely and
only call edp panel control in enable_link_dp and
disable_link_dp once.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When link training during engine recovery, ASSR might fail causing panel
mode to be reset to default. This should not happen for eDP as it
will prevent the panel from turning back on.
[How]
Added dp_panel_mode to struct dc_link to remember previously applied
panel mode. Do not reset panel mode to default while performing link
training if previously used panel mode = eDP.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Michael Mityushkin <michael.mityushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] hdcp are enabled for asics from raven. for old asics
which hdcp are not enabled, hdcp_workqueue are null. some
access to hdcp work queue are not guarded with pointer check.
[How] add hdcp_workqueue pointer check before access workqueue.
Fixes: 82986fd631 ("drm/amd/display: save restore hdcp state when display is unplugged from mst hub")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2444
Reported-by: Niklāvs Koļesņikovs <89q1r14hd@relay.firefox.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Description]
- Having excessively large margin causes failure in the static
schedulability check in some cases for SubVP + DRR
- 100us of DRR margin is sufficient based on a weeks worth of
stress testing on different display configs
Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
when amdgpu_dm_update_connector_after_detect is called
two times successively with valid sink, memory allocated of
aconnector->timing_requested for the first call is not free.
this causes memeleak.
[How]
allocate memory only when aconnector->timing_requested
is null.
Reviewed-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
When skipping full modeset since the only state change was a front porch
change, the DC commit sequence requires extra checks to handle non
existant plane states being asked to be removed from context.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When IGT's kms_hdmi_inject forces EDID for HDMI audio, dc rejects the
request because virtual signal is not in dc_is_audio_capable_signal
function.
[How]
Includes SIGNAL_TYPE_VIRTUAL as audio capable.
Reviewed-by: Chao-kai Wang <Stylon.Wang@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenchieh Chien <wenchieh.chien@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add code path to copy dmub caps to dc, which is missing on dcn31
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the commit fff7eb56b3 ("drm/amd/display: Don't set dram clock
change requirement for SubVP") was merged, we missed some parts
associated with the MCLK switch. This commit adds all the missing parts.
Fixes: fff7eb56b3 ("drm/amd/display: Don't set dram clock change requirement for SubVP")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It is possible to commit state multiple times in rapid succession with
FAMS enabled; if each of these commits were to set optimized_required,
then the user may see latency.
[HOW]
fw_based_mclk_switching is currently not used in dc->clk_mgr; use it
to track whether the current state has FAMS enabled;
if it has, then do not disable FAMS in prepare_bandwidth, and do not set
optimized_required.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a
pipe commit can cause underflow.
[HOW]
Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets
optimized_required.
This change expects that Freesync requests are blocked when
optimized_required is true.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-misc-next-fixes for v6.4-rc1:
- Revert uAPI from accel/qaic.
- Fix TTM build on archs where PMD_SHIFT is not constant.
- Improve error handling in nt35950.
- Fix double unregister in otm8009a when removing the driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/45757de9-75d8-5b41-f1f9-562a7c4675b9@linux.intel.com
The skl+ scalers only sample 12 bits of PIPESRC so we can't
do any plane scaling at all when the pipe source size is >4k.
Make sure the pipe source size is also below the scaler's src
size limits. Might not be 100% accurate, but should at least be
safe. We can refine the limits later if we discover that recent
hw is less restricted.
Cc: stable@vger.kernel.org
Tested-by: Ross Zwisler <zwisler@google.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8357
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418175528.13117-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 691248d413)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
- This patch series refactors fbdev callbacks to DRM client functions and
simplifies fbdev emulation initialization including some code cleanups.
The changes make fbdev emulation behave like a regular DRM client.
-----BEGIN PGP SIGNATURE-----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=rko2
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
A patch series for implementing fbdev emulation as in-kernel client.
- This patch series refactors fbdev callbacks to DRM client functions and
simplifies fbdev emulation initialization including some code cleanups.
The changes make fbdev emulation behave like a regular DRM client.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417100624.35229-1-inki.dae@samsung.com
The port PLL selection needs to be up-to-date in the CRTC state of both
the primary and all secondary MST streams. The commit removing the
encoder update_prepare/complete hooks (see Fixes: below), stopped doing
this for secondary streams, fix this up.
Fixes: 0f752b2178 ("drm/i915: Remove the encoder update_prepare()/complete() hooks")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8336
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230414173800.590790-1-imre.deak@intel.com
(cherry picked from commit 27ac123b45)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
smatch reports
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:277:6: warning: symbol
'dccg314_init' was not declared. Should it be static?
This variable is only used in one file so should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
