I2C and SPI frameworks followed by IRQ framework do set
interrupt polarity correctly if it's properly specified in firmware
(ACPI or DT).
Get rid of the redundant trick when requesting interrupt.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Legacy platform data must go away. We are on the safe side here since
there are no users of it in the kernel.
If anyone by any odd reason needs it the GPIO lookup tables and
built-in device properties at your service.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In order to make GPIO ACPI library stricter prepare users of
gpiod_get_index() to correctly behave when there no mapping is
provided by firmware.
Here we add explicit mapping between _CRS GpioIo() resources and
their names used in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
It looks like there are two leftovers, at least one of which can leak
the resource (IRQ).
Convert both places to use managed variants of the functions.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
There is no platform code that uses i2c module table.
Remove it altogether and adjust ->probe() to be ->probe_new().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Since OF and ACPI case almost the same get rid of code duplication
by moving gpiod_get() calls directly to ->probe().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In order to make GPIO ACPI library stricter prepare users of
gpiod_get_index() to correctly behave when there no mapping is
provided by firmware.
Here we add explicit mapping between _CRS GpioIo() resources and
their names used in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Switch to use managed variant of acpi_dev_add_driver_gpios() to simplify
error path and fix potentially wrong assignment if ->probe() fails.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Allow gpio 0 to be used for reset signalling, and instead use negative
errnos to disable the reset functionality.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Use the USB-interface rather than parent USB-device device, which is
what this driver binds to, when registering the nci device.
Note that using the right device is important when dealing with device-
managed resources as the interface can be unbound independently of the
parent device.
Also note that private device pointer had already been set by
nfcmrvl_nci_register_dev() so the redundant assignment can therefore be
removed.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Make sure to release the device-node reference when done parsing the
node.
Fixes: e097dc624f ("NFC: nfcmrvl: add UART driver")
Cc: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The nci-device was never deregistered in the event that
fw-initialisation failed.
Fix this by moving the firmware initialisation before device
registration since the firmware work queue should be available before
registering.
Note that this depends on a recent fix that moved device-name
initialisation back to to nci_allocate_device() as the
firmware-workqueue name is now derived from the nfc-device name.
Fixes: 3194c68701 ("NFC: nfcmrvl: add firmware download support")
Cc: stable <stable@vger.kernel.org> # 4.4
Cc: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Use the nfc- rather than phy-device in firmware-management code that
needs a valid struct device.
This specifically fixes a NULL-pointer dereference in
nfcmrvl_fw_dnld_init() during registration when the underlying tty is
one end of a Unix98 pty.
Note that the driver still uses the phy device for any debugging, which
is fine for now.
Fixes: 3194c68701 ("NFC: nfcmrvl: add firmware download support")
Cc: stable <stable@vger.kernel.org> # 4.4
Cc: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This specifically fixes resource leaks in the registration error paths.
Device-managed resources is a bad fit for this driver as devices can be
registered from the n_nci line discipline. Firstly, a tty may not even
have a corresponding device (should it be part of a Unix98 pty)
something which would lead to a NULL-pointer dereference when
registering resources.
Secondly, if the tty has a class device, its lifetime exceeds that of
the line discipline, which means that resources would leak every time
the line discipline is closed (or if registration fails).
Currently, the devres interface was only being used to request a reset
gpio despite the fact that it was already explicitly freed in
nfcmrvl_nci_unregister_dev() (along with the private data), something
which also prevented the resource leak at close.
Note that the driver treats gpio number 0 as invalid despite it being
perfectly valid. This will be addressed in a follow-up patch.
Fixes: b2fe288eac ("NFC: nfcmrvl: free reset gpio")
Fixes: 4a2b947f56 ("NFC: nfcmrvl: add chip reset management")
Cc: stable <stable@vger.kernel.org> # 4.2: b2fe288eac
Cc: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Make sure to check the tty-device pointer before trying to access the
parent device to avoid dereferencing a NULL-pointer when the tty is one
end of a Unix98 pty.
Fixes: e097dc624f ("NFC: nfcmrvl: add UART driver")
Cc: stable <stable@vger.kernel.org> # 4.2
Cc: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Clean up coding style issues according to scripts/Lindent.
Some scripts/Lindent changes were reverted when it appeared
to make the code less readable or when it made the line run
over 80 characters.
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The trf7970a driver uses the deprecated integer-based GPIO consumer
interface so convert it to use the new descriptor-based GPIO
consumer interface.
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The 'vin-voltage-override' DT property is used by the trf7970a
driver to override the voltage presented to the driver by the
regulator subsystem. This is unnecessary as properly specifying
the regulator chain via DT properties will accomplish the same
thing. Therefore, remove support for 'vin-voltage-override'.
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The last entry in the trf7970a_of_match[] table must be an empty
entry to demarcate the end of the table. Currently, there is a
comment indicating this but it is obvious so remove the comment.
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The quirk indicated by the 'en2-rf-quirk' device tree property
is only relevant when there is a GPIO connected to the EN2 pin
of the trf7970a. This means we should only check for 'en2-rf-quirk'
when EN2 is specified in the 'ti,enable-gpios' property of the
device tree.
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
As of commit ce69b95ca4 ("NFC: Make EN2 pin optional in the
TRF7970A driver"), only the GPIO for the 'EN' enable pin needs
to be specified in the device tree so update the comments that
says both 'EN' and 'EN2' must be specified.
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
When the trf7970a part has the bug related to 'en2-rf-quirk',
the GPIO connected to the EN2 pin will not be asserted by the
driver when powering up so it shouldn't be de-asserted when
powering down.
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Joe and Bjørn suggested that it'd be nicer to not have the
cast in the fairly common case of doing
*(u8 *)skb_put(skb, 1) = c;
Add skb_put_u8() for this case, and use it across the code,
using the following spatch:
@@
expression SKB, C, S;
typedef u8;
identifier fn = {skb_put};
fresh identifier fn2 = fn ## "_u8";
@@
- *(u8 *)fn(SKB, S) = C;
+ fn2(SKB, C);
Note that due to the "S", the spatch isn't perfect, it should
have checked that S is 1, but there's also places that use a
sizeof expression like sizeof(var) or sizeof(u8) etc. Turns
out that nobody ever did something like
*(u8 *)skb_put(skb, 2) = c;
which would be wrong anyway since the second byte wouldn't be
initialized.
Suggested-by: Joe Perches <joe@perches.com>
Suggested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It seems like a historic accident that these return unsigned char *,
and in many places that means casts are required, more often than not.
Make these functions return void * and remove all the casts across
the tree, adding a (u8 *) cast only where the unsigned char pointer
was used directly, all done with the following spatch:
@@
expression SKB, LEN;
typedef u8;
identifier fn = { skb_push, __skb_push, skb_push_rcsum };
@@
- *(fn(SKB, LEN))
+ *(u8 *)fn(SKB, LEN)
@@
expression E, SKB, LEN;
identifier fn = { skb_push, __skb_push, skb_push_rcsum };
type T;
@@
- E = ((T *)(fn(SKB, LEN)))
+ E = fn(SKB, LEN)
@@
expression SKB, LEN;
identifier fn = { skb_push, __skb_push, skb_push_rcsum };
@@
- fn(SKB, LEN)[0]
+ *(u8 *)fn(SKB, LEN)
Note that the last part there converts from push(...)[0] to the
more idiomatic *(u8 *)push(...).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It seems like a historic accident that these return unsigned char *,
and in many places that means casts are required, more often than not.
Make these functions return void * and remove all the casts across
the tree, adding a (u8 *) cast only where the unsigned char pointer
was used directly, all done with the following spatch:
@@
expression SKB, LEN;
typedef u8;
identifier fn = {
skb_pull,
__skb_pull,
skb_pull_inline,
__pskb_pull_tail,
__pskb_pull,
pskb_pull
};
@@
- *(fn(SKB, LEN))
+ *(u8 *)fn(SKB, LEN)
@@
expression E, SKB, LEN;
identifier fn = {
skb_pull,
__skb_pull,
skb_pull_inline,
__pskb_pull_tail,
__pskb_pull,
pskb_pull
};
type T;
@@
- E = ((T *)(fn(SKB, LEN)))
+ E = fn(SKB, LEN)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It seems like a historic accident that these return unsigned char *,
and in many places that means casts are required, more often than not.
Make these functions (skb_put, __skb_put and pskb_put) return void *
and remove all the casts across the tree, adding a (u8 *) cast only
where the unsigned char pointer was used directly, all done with the
following spatch:
@@
expression SKB, LEN;
typedef u8;
identifier fn = { skb_put, __skb_put };
@@
- *(fn(SKB, LEN))
+ *(u8 *)fn(SKB, LEN)
@@
expression E, SKB, LEN;
identifier fn = { skb_put, __skb_put };
type T;
@@
- E = ((T *)(fn(SKB, LEN)))
+ E = fn(SKB, LEN)
which actually doesn't cover pskb_put since there are only three
users overall.
A handful of stragglers were converted manually, notably a macro in
drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many
instances in net/bluetooth/hci_sock.c. In the former file, I also
had to fix one whitespace problem spatch introduced.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A common pattern with skb_put() is to just want to memcpy()
some data into the new space, introduce skb_put_data() for
this.
An spatch similar to the one for skb_put_zero() converts many
of the places using it:
@@
identifier p, p2;
expression len, skb, data;
type t, t2;
@@
(
-p = skb_put(skb, len);
+p = skb_put_data(skb, data, len);
|
-p = (t)skb_put(skb, len);
+p = skb_put_data(skb, data, len);
)
(
p2 = (t2)p;
-memcpy(p2, data, len);
|
-memcpy(p, data, len);
)
@@
type t, t2;
identifier p, p2;
expression skb, data;
@@
t *p;
...
(
-p = skb_put(skb, sizeof(t));
+p = skb_put_data(skb, data, sizeof(t));
|
-p = (t *)skb_put(skb, sizeof(t));
+p = skb_put_data(skb, data, sizeof(t));
)
(
p2 = (t2)p;
-memcpy(p2, data, sizeof(*p));
|
-memcpy(p, data, sizeof(*p));
)
@@
expression skb, len, data;
@@
-memcpy(skb_put(skb, len), data, len);
+skb_put_data(skb, data, len);
(again, manually post-processed to retain some comments)
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the recently introduced helper to replace the pattern of
skb_put() && memset(), this transformation was done with the
following spatch:
@@
identifier p;
expression len;
expression skb;
@@
-p = skb_put(skb, len);
-memset(p, 0, len);
+p = skb_put_zero(skb, len);
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* if a local variable of type uint16_t is unaligned, your compiler is FUBAR
* the whole point of get_unaligned_... is to avoid memcpy + ..._to_cpu().
Using it *after* memcpy() (into aligned object, no less) is pointless.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The TRF7970A has configuration options for supporting hardware designs
with 1.8 Volt or 3.3 Volt IO. This commit adds a device tree option,
using a fixed regulator binding, for setting the io voltage to match
the hardware configuration. If no option is supplied it defaults to
3.3 volt configuration.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Geoff Lansberry <geoff@kuvee.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The TRF7970A has configuration options to support hardware designs
which use a 27.12MHz clock. This commit adds a device tree option
'clock-frequency' to support configuring the this chip for default
13.56MHz clock or the optional 27.12MHz clock.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Geoff Lansberry <geoff@kuvee.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Another place in the code that unveils non-tested at all ACPI case.
Use unified device property API in meaningful way.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Since we got rid of platform data, the driver may use GPIO descriptor
directly.
Looking deeply to the use of the GPIO pin it looks like it should be
a fixed voltage regulator rather than custom GPIO handling. But this
is out of scope of the change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
I2C framework followed by IRQ framework does set interrupt polarity
correctly if it's properly specified in firmware (ACPI or DT).
Get rid of the redundant trick when requesting interrupt.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Legacy platform data must go away. We are on the safe side here since
there are no users of it in the kernel.
If anyone by any odd reason needs it the GPIO lookup tables and
built-in device properties at your service.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
We return -ENODEV if ACPI provides a GPIO resource. Looks really wrong.
If it has even been tested?
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Since OF and ACPI case almost the same get rid of code duplication
by moving gpiod_get() calls directly to ->probe().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In order to make GPIO ACPI library stricter prepare users of
gpiod_get_index() to correctly behave when there no mapping is
provided by firmware.
Here we add explicit mapping between _CRS GpioIo() resources and
their names used in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The error handling will be neat and short when using managed resources.
Convert the driver to use devm_request_threaded_irq().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Since we got rid of platform data, the driver may use
GPIO descriptor directly.
This change fixes a potential issue of double freeing GPIOs in ACPI
case by converting to devm_gpiod_get().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Legacy platform data must go away. We are on the safe side here since
there are no users of it in the kernel.
If anyone by any odd reason needs it the GPIO lookup tables and
built-in device properties at your service.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Sometimes during probing and registration of pn533_i2c
NULL pointer dereference happens.
Reproduced in cycle of inserting and removing pn533_i2c
and pn533 modules.
Backtrace:
[<8004205c>] (__queue_work) from [<80042324>] (queue_work_on+0x50/0x5c)
r10:acdc7c80 r9:8006b330 r8:ac0dfb40 r7:ac50c600 r6:00000004 r5:acbbee40 r4:600f0113
[<800422d4>] (queue_work_on) from [<7f7d5b6c>] (pn533_recv_frame+0x158/0x1fc [pn533])
r7:ffffff87 r6:00000000 r5:acbbee40 r4:acbbee00
[<7f7d5a14>] (pn533_recv_frame [pn533]) from [<7f7df4b8>] (pn533_i2c_irq_thread_fn+0x184/0x)
r6:acb2a000 r5:00000000 r4:acdc7b90
[<7f7df334>] (pn533_i2c_irq_thread_fn [pn533_i2c]) from [<8006b354>] (irq_thread_fn+0x24/0x)
r7:00000000 r6:accde000 r5:ac0dfb40 r4:acdc7c80
...
Seems there is some race condition due registration of
irq handler until all data stuctures that could be needed
are ready. So I re-ordered some ops. After this, problem has gone.
Changes in USB part was not tested, but it should not break
anything.
Signed-off-by: Andrey Rusalin <arusalin@dev.rtsoft.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Make sure cmd is set before a frame is passed to the transport layer for
sending. In addition pn533_send_async_complete checks if cmd is set before
accessing its members.
Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at>
Rework a little bit changes in pn532_send_async_complete.
Signed-off-by: Andrey Rusalin <arusalin@dev.rtsoft.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Change order of free_irq and dev unregistration.
It fixes situation when device already unregistered and
an interrupt happens and nobody can handle it.
Signed-off-by: Andrey Rusalin <arusalin@dev.rtsoft.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
We are checking phy after dereferencing it. We can print the debug
information after checking it. If phy is NULL then we will get a good
stack trace to tell us that we are in this irq handler.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Make the EN2 pin optional. This is useful for boards,
which have this pin fix wired, for example to ground.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guan Ben <ben.guan@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
ulseep_range() uses hrtimers and provides no advantage over msleep()
for larger delays. For this large delay msleep() is preferable.
Fixes: commit 6be88670fc ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
Link: http://lkml.org/lkml/2017/1/11/377
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
If all bits of 'dev_mask' are already set, there is a memory leak because
'info' should be freed before returning.
While fixing it, 'return -ENOMEM' directly if the first kzalloc fails.
This makes the code more readable.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The nci_spi_send() function calls kfree_skb(skb) on both error and
success so this extra kfree_skb() is a double free.
Fixes: caf6e49bf6 ("NFC: nfcmrvl: add spi driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
