Pull networking updates from David Miller:
"Here is my initial pull request for the networking subsystem during
this merge window:
1) Support for ESN in AH (RFC 4302) from Fan Du.
2) Add full kernel doc for ethtool command structures, from Ben
Hutchings.
3) Add BCM7xxx PHY driver, from Florian Fainelli.
4) Export computed TCP rate information in netlink socket dumps, from
Eric Dumazet.
5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas
Dichtel.
6) Convert many drivers to pci_enable_msix_range(), from Alexander
Gordeev.
7) Record SKB timestamps more efficiently, from Eric Dumazet.
8) Switch to microsecond resolution for TCP round trip times, also
from Eric Dumazet.
9) Clean up and fix 6lowpan fragmentation handling by making use of
the existing inet_frag api for it's implementation.
10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss.
11) Auto size SKB lengths when composing netlink messages based upon
past message sizes used, from Eric Dumazet.
12) qdisc dumps can take a long time, add a cond_resched(), From Eric
Dumazet.
13) Sanitize netpoll core and drivers wrt. SKB handling semantics.
Get rid of never-used-in-tree netpoll RX handling. From Eric W
Biederman.
14) Support inter-address-family and namespace changing in VTI tunnel
driver(s). From Steffen Klassert.
15) Add Altera TSE driver, from Vince Bridgers.
16) Optimizing csum_replace2() so that it doesn't adjust the checksum
by checksumming the entire header, from Eric Dumazet.
17) Expand BPF internal implementation for faster interpreting, more
direct translations into JIT'd code, and much cleaner uses of BPF
filtering in non-socket ocntexts. From Daniel Borkmann and Alexei
Starovoitov"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits)
netpoll: Use skb_irq_freeable to make zap_completion_queue safe.
net: Add a test to see if a skb is freeable in irq context
qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port'
net: ptp: move PTP classifier in its own file
net: sxgbe: make "core_ops" static
net: sxgbe: fix logical vs bitwise operation
net: sxgbe: sxgbe_mdio_register() frees the bus
Call efx_set_channels() before efx->type->dimension_resources()
xen-netback: disable rogue vif in kthread context
net/mlx4: Set proper build dependancy with vxlan
be2net: fix build dependency on VxLAN
mac802154: make csma/cca parameters per-wpan
mac802154: allow only one WPAN to be up at any given time
net: filter: minor: fix kdoc in __sk_run_filter
netlink: don't compare the nul-termination in nla_strcmp
can: c_can: Avoid led toggling for every packet.
can: c_can: Simplify TX interrupt cleanup
can: c_can: Store dlc private
can: c_can: Reduce register access
can: c_can: Make the code readable
...
doubling of the default queue length though.
Cheers,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=AoMS
-----END PGP SIGNATURE-----
Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull virtio updates from Rusty Russell:
"Nothing exciting: virtio-blk users might see a bit of a boost from the
doubling of the default queue length though"
* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
virtio-blk: base queue-depth on virtqueue ringsize or module param
Revert a02bbb1ccf: MAINTAINERS: add virtio-dev ML for virtio
virtio: fail adding buffer on broken queues.
virtio-rng: don't crash if virtqueue is broken.
virtio_balloon: don't crash if virtqueue is broken.
virtio_blk: don't crash, report error if virtqueue is broken.
virtio_net: don't crash if virtqueue is broken.
virtio_balloon: don't softlockup on huge balloon changes.
virtio: Use pci_enable_msix_exact() instead of pci_enable_msix()
MAINTAINERS: virtio-dev is subscribers only
tools/virtio: add a missing )
tools/virtio: fix missing kmemleak_ignore symbol
tools/virtio: update internal copies of headers
Pull main powerpc updates from Ben Herrenschmidt:
"This time around, the powerpc merges are going to be a little bit more
complicated than usual.
This is the main pull request with most of the work for this merge
window. I will describe it a bit more further down.
There is some additional cpuidle driver work, however I haven't
included it in this tree as it depends on some work in tip/timer-core
which Thomas accidentally forgot to put in a topic branch. Since I
didn't want to carry all of that tip timer stuff in powerpc -next, I
setup a separate branch on top of Thomas tree with just that cpuidle
driver in it, and Stephen has been carrying that in next separately
for a while now. I'll send a separate pull request for it.
Additionally, two new pieces in this tree add users for a sysfs API
that Tejun and Greg have been deprecating in drivers-core-next.
Thankfully Greg reverted the patch that removes the old API so this
merge can happen cleanly, but once merged, I will send a patch
adjusting our new code to the new API so that Greg can send you the
removal patch.
Now as for the content of this branch, we have a lot of perf work for
power8 new counters including support for our new "nest" counters
(also called 24x7) under pHyp (not natively yet).
We have new functionality when running under the OPAL firmware
(non-virtualized or KVM host), such as access to the firmware error
logs and service processor dumps, system parameters and sensors, along
with a hwmon driver for the latter.
There's also a bunch of bug fixes accross the board, some LE fixes,
and a nice set of selftests for validating our various types of copy
loops.
On the Freescale side, we see mostly new chip/board revisions, some
clock updates, better support for machine checks and debug exceptions,
etc..."
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (70 commits)
powerpc/book3s: Fix CFAR clobbering issue in machine check handler.
powerpc/compat: 32-bit little endian machine name is ppcle, not ppc
powerpc/le: Big endian arguments for ppc_rtas()
powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n)
powerpc/defconfigs: Enable THP in pseries defconfig
powerpc/mm: Make sure a local_irq_disable prevent a parallel THP split
powerpc: Rate-limit users spamming kernel log buffer
powerpc/perf: Fix handling of L3 events with bank == 1
powerpc/perf/hv_{gpci, 24x7}: Add documentation of device attributes
powerpc/perf: Add kconfig option for hypervisor provided counters
powerpc/perf: Add support for the hv 24x7 interface
powerpc/perf: Add support for the hv gpci (get performance counter info) interface
powerpc/perf: Add macros for defining event fields & formats
powerpc/perf: Add a shared interface to get gpci version and capabilities
powerpc/perf: Add 24x7 interface headers
powerpc/perf: Add hv_gpci interface header
powerpc: Add hvcalls for 24x7 and gpci (Get Performance Counter Info)
sysfs: create bin_attributes under the requested group
powerpc/perf: Enable BHRB access for EBB events
powerpc/perf: Add BHRB constraint and IFM MMCRA handling for EBB
...
Here's the big char/misc driver updates for 3.15-rc1.
Lots of various things here, including the new mcb driver subsystem.
All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlM7ArIACgkQMUfUDdst+ylS+gCfcJr0Zo2v5aWnqD7rFtFETmFI
LhcAoNTQ4cvlVdxnI0driWCWFYxLj6at
=aj+L
-----END PGP SIGNATURE-----
Merge tag 'char-misc-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver patches from Greg KH:
"Here's the big char/misc driver updates for 3.15-rc1.
Lots of various things here, including the new mcb driver subsystem.
All of these have been in linux-next for a while"
* tag 'char-misc-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (118 commits)
extcon: Move OF helper function to extcon core and change function name
extcon: of: Remove unnecessary function call by using the name of device_node
extcon: gpio: Use SIMPLE_DEV_PM_OPS macro
extcon: palmas: Use SIMPLE_DEV_PM_OPS macro
mei: don't use deprecated DEFINE_PCI_DEVICE_TABLE macro
mei: amthif: fix checkpatch error
mei: client.h fix checkpatch errors
mei: use cl_dbg where appropriate
mei: fix Unnecessary space after function pointer name
mei: report consistently copy_from/to_user failures
mei: drop pr_fmt macros
mei: make me hw headers private to me hw.
mei: fix memory leak of pending write cb objects
mei: me: do not reset when less than expected data is received
drivers: mcb: Fix build error discovered by 0-day bot
cs5535-mfgpt: Simplify dependencies
spmi: pm: drop bus-level PM suspend/resume routines
spmi: pmic_arb: make selectable on ARCH_QCOM
Drivers: hv: vmbus: Increase the limit on the number of pfns we can handle
pch_phub: Report error writing MAC back to user
...
Pull perf changes from Ingo Molnar:
"Main changes:
Kernel side changes:
- Add SNB/IVB/HSW client uncore memory controller support (Stephane
Eranian)
- Fix various x86/P4 PMU driver bugs (Don Zickus)
Tooling, user visible changes:
- Add several futex 'perf bench' microbenchmarks (Davidlohr Bueso)
- Speed up thread map generation (Don Zickus)
- Introduce 'perf kvm --list-cmds' command line option for use by
scripts (Ramkumar Ramachandra)
- Print the evsel name in the annotate stdio output, prep to fix
support outputting annotation for multiple events, not just for the
first one (Arnaldo Carvalho de Melo)
- Allow setting preferred callchain method in .perfconfig (Jiri Olsa)
- Show in what binaries/modules 'perf probe's are set (Masami
Hiramatsu)
- Support distro-style debuginfo for uprobe in 'perf probe' (Masami
Hiramatsu)
Tooling, internal changes and fixes:
- Use tid in mmap/mmap2 events to find maps (Don Zickus)
- Record the reason for filtering an address_location (Namhyung Kim)
- Apply all filters to an addr_location (Namhyung Kim)
- Merge al->filtered with hist_entry->filtered in report/hists
(Namhyung Kim)
- Fix memory leak when synthesizing thread records (Namhyung Kim)
- Use ui__has_annotation() in 'report' (Namhyung Kim)
- hists browser refactorings to reuse code accross UIs (Namhyung Kim)
- Add support for the new DWARF unwinder library in elfutils (Jiri
Olsa)
- Fix build race in the generation of bison files (Jiri Olsa)
- Further streamline the feature detection display, trimming it a bit
to show just the libraries detected, using VF=1 gets a more verbose
output, showing the less interesting feature checks as well (Jiri
Olsa).
- Check compatible symtab type before loading dso (Namhyung Kim)
- Check return value of filename__read_debuglink() (Stephane Eranian)
- Move some hashing and fs related code from tools/perf/util/ to
tools/lib/ so that it can be used by more tools/ living utilities
(Borislav Petkov)
- Prepare DWARF unwinding code for using an elfutils alternative
unwinding library (Jiri Olsa)
- Fix DWARF unwind max_stack processing (Jiri Olsa)
- Add dwarf unwind 'perf test' entry (Jiri Olsa)
- 'perf probe' improvements including memory leak fixes, sharing the
intlist class with other tools, uprobes/kprobes code sharing and
use of ref_reloc_sym (Masami Hiramatsu)
- Shorten sample symbol resolving by adding cpumode to struct
addr_location (Arnaldo Carvalho de Melo)
- Fix synthesizing mmaps for threads (Don Zickus)
- Fix invalid output on event group stdio report (Namhyung Kim)
- Fixup header alignment in 'perf sched latency' output (Ramkumar
Ramachandra)
- Fix off-by-one error in 'perf timechart record' argv handling
(Ramkumar Ramachandra)
Tooling, cleanups:
- Remove unused thread__find_map function (Jiri Olsa)
- Remove unused simple_strtoul() function (Ramkumar Ramachandra)
Tooling, documentation updates:
- Update function names in debug messages (Ramkumar Ramachandra)
- Update some code references in design.txt (Ramkumar Ramachandra)
- Clarify load-latency information in the 'perf mem' docs (Andi
Kleen)
- Clarify x86 register naming in 'perf probe' docs (Andi Kleen)"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (96 commits)
perf tools: Remove unused simple_strtoul() function
perf tools: Update some code references in design.txt
perf evsel: Update function names in debug messages
perf tools: Remove thread__find_map function
perf annotate: Print the evsel name in the stdio output
perf report: Use ui__has_annotation()
perf tools: Fix memory leak when synthesizing thread records
perf tools: Use tid in mmap/mmap2 events to find maps
perf report: Merge al->filtered with hist_entry->filtered
perf symbols: Apply all filters to an addr_location
perf symbols: Record the reason for filtering an address_location
perf sched: Fixup header alignment in 'latency' output
perf timechart: Fix off-by-one error in 'record' argv handling
perf machine: Factor machine__find_thread to take tid argument
perf tools: Speed up thread map generation
perf kvm: introduce --list-cmds for use by scripts
perf ui hists: Pass evsel to hpp->header/width functions explicitly
perf symbols: Introduce thread__find_cpumode_addr_location
perf session: Change header.misc dump from decimal to hex
perf ui/tui: Reuse generic __hpp__fmt() code
...
Pull RCU updates from Ingo Molnar:
"Main changes:
- Torture-test changes, including refactoring of rcutorture and
introduction of a vestigial locktorture.
- Real-time latency fixes.
- Documentation updates.
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
rcu: Provide grace-period piggybacking API
rcu: Ensure kernel/rcu/rcu.h can be sourced/used stand-alone
rcu: Fix sparse warning for rcu_expedited from kernel/ksysfs.c
notifier: Substitute rcu_access_pointer() for rcu_dereference_raw()
Documentation/memory-barriers.txt: Clarify release/acquire ordering
rcutorture: Save kvm.sh output to log
rcutorture: Add a lock_busted to test the test
rcutorture: Place kvm-test-1-run.sh output into res directory
rcutorture: Rename TREE_RCU-Kconfig.txt
locktorture: Add kvm-recheck.sh plug-in for locktorture
rcutorture: Gracefully handle NULL cleanup hooks
locktorture: Add vestigial locktorture configuration
rcutorture: Introduce "rcu" directory level underneath configs
rcutorture: Rename kvm-test-1-rcu.sh
rcutorture: Remove RCU dependencies from ver_functions.sh API
rcutorture: Create CFcommon file for common Kconfig parameters
rcutorture: Create config files for scripted test-the-test testing
rcutorture: Add an rcu_busted to test the test
locktorture: Add a lock-torture kernel module
rcutorture: Abstract kvm-recheck.sh
...
Conflicts:
Documentation/devicetree/bindings/net/micrel-ks8851.txt
net/core/netpoll.c
The net/core/netpoll.c conflict is a bug fix in 'net' happening
to code which is completely removed in 'net-next'.
In micrel-ks8851.txt we simply have overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Moreover, the corresponding function in include/linux/kernel.h is marked
obsolete.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1395176715-4465-1-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update the names of some functions and enums in design.txt. The document
still has some stale information, but the motivation behind this patch
is to allow a developer to quickly grep and learn about the associated
structures.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1395169804-1293-1-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_event_open() was renamed to sys_perf_event_open(); update the debug
messages to reflect this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1395169842-1399-1-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because it's not used any more.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1395154016-26709-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that when showing multiple events annotations, we can figure out
which is which:
# perf record -a -e instructions,cycles sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.826 MB perf.data (~36078 samples) ]
# perf evlist
instructions
cycles
# perf annotate intel_idle 2> /dev/null | head -1
Percent | Source code & Disassembly of vmlinux for instructions
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-n1r51l329434js84qtb2c6l9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we introduced the ui__has_annotation() for that, don't open code
it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1395124359-11744-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Checking default guest machine should be done before allocating event
structures otherwise it'll leak memory.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Link: http://lkml.kernel.org/r/87ob15tx6a.fsf@sejong.aot.lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we can properly synthesize threads system-wide, make sure the
mmap and mmap2 events use tids instead of pids to locate their maps.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1393429527-167840-3-git-send-email-dzickus@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. don't drop al->filtered entries, create the hist_entries and use
its ->filtered bitmap, that is kept with the same semantics for its
bitmap, leaving the filtering to be done at the hist_entry level, i.e.
in the UIs.
This will allow zooming in/out the filters.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-xeyhkepu7plw716lrtb0zlnu@git.kernel.org
[ yanked this out of a previous patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of bailing out as soon as we find a filter that applies, go on
checking all of them so that we can zoom in/out filters.
We also need to make sure we only update al->filtered after
thread__find_addr_map(), because there is where al->filtered gets
initialized to zero.
This will increase the cost of processing when all we don't need this
toggling, but will provide flexibility for the TUI and GTK+ interfaces,
that will incur in creating the hist_entries just once.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-fhv9lhzdjxgp9w3w3668lsfw@git.kernel.org
[ yanked this out of a previous patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By turning the addr_location->filtered member from a boolean to a u8
bitmap, reusing (and extending) the hist_filter enum for that.
This patch doesn't change the logic at all, as it keeps the meaning of
al->filtered !0 to mean that the entry _was_ filtered, so no change in
how this value is interpreted needs to be done at this point.
This will be soon used in upcoming patches.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-89hmfgtr9t22sky1lyg7nw7l@git.kernel.org
[ yanked this out of a previous patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
---------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at |
---------------------------------------------------------------------------------------------------------------
... | | | | |
git:24540 | 336.622 ms | 10 | avg: 0.032 ms | max: 0.062 ms | max at: 115610.111046 s
git:24541 | 0.457 ms | 1 | avg: 0.000 ms | max: 0.000 ms | max at: 0.000000 s
-----------------------------------------------------------------------------------------
TOTAL: | 396.542 ms | 353 |
---------------------------------------------------
After:
-----------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at |
-----------------------------------------------------------------------------------------------------------------
... | | | | |
git:24540 | 336.622 ms | 10 | avg: 0.032 ms | max: 0.062 ms | max at: 115610.111046 s
git:24541 | 0.457 ms | 1 | avg: 0.000 ms | max: 0.000 ms | max at: 0.000000 s
-----------------------------------------------------------------------------------------------------------------
TOTAL: | 396.542 ms | 353 |
---------------------------------------------------
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1395065901-25740-1-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since 367b315 (perf timechart: Add support for -P and -T in timechart
recording, 2013-11-01), the 'perf timechart record' command stopped
working:
$ perf timechart record -- git status
Workload failed: No such file or directory
This happens because of an off-by-one error while preparing the argv for
cmd_record(): it attempts to execute the command 'status' and complains
that it doesn't exist. Fix this error.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stanislav Fomichev <stfomichev@yandex-team.ru>
Link: http://lkml.kernel.org/r/1394985965-2332-1-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
. Make 'perf bench mem' (i.e. no args) mean 'run all tests' so that we can run
all tests, not stopping at the numa ones. (Arnaldo Carvalho de Melo)
. Fix NULL pointer dereference after last test in in "perf bench all" (Patrick Palka)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9uCB
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull two 'perf bench' fixes from Arnaldo:
* Make 'perf bench mem' (i.e. no args) mean 'run all tests' so that we can run
all tests, not stopping at the numa ones. (Arnaldo Carvalho de Melo)
* Fix NULL pointer dereference after last test in in "perf bench all" (Patrick Palka)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf fixes from Ingo Molnar:
"Misc smaller fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix leak in uncore_type_init failure paths
perf machine: Use map as success in ip__resolve_ams
perf symbols: Fix crash in elf_section_by_name
perf trace: Decode architecture-specific signal numbers
Conflicts:
drivers/net/usb/r8152.c
drivers/net/xen-netback/netback.c
Both the r8152 and netback conflicts were simple overlapping
changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Forcing the code to always search thread by pid/tid pair.
The PID value will be needed in future to determine the process thread
leader for map groups sharing.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1394805606-25883-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When trying to capture perf data on a system running spejbb2013, perf
hung for about 15 minutes. This is because it took that long to gather
about 10,000 thread maps and process them.
I don't think a user wants to wait that long.
Instead, recognize that thread maps are roughly equivalent to pid maps
and just quickly copy those instead.
To do this, I synthesize 'fork' events, this eventually calls
thread__fork() and copies the maps over.
The overhead goes from 15 minutes down to about a few seconds.
--
V2: based on Jiri's comments, moved malloc up a level
and made sure the memory was freed
Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Link: http://lkml.kernel.org/r/1394808224-113774-1-git-send-email-dzickus@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce
$ perf kvm --list-cmds
to dump a raw list of commands for use by the completion script. In
order to do this, introduce parse_options_subcommand() for handling
subcommands as a special case in the parse-options machinery.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1393896396-10427-1-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those functions need evsel to investigate event group and it's passed
via hpp->ptr. However as it can be missed easily so it's better to
pass it via an argument IMHO.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1394437440-11609-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Its one level up thread__find_addr_location, where it will look in
different domains for a sample: user, kernel, hypervisor, etc.
Will soon be used by a patchkit by Andi Kleen.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-so6nxkh7xj48bc5kq4jpj991@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When printing the raw dump of a data file, the header.misc is
printed as a decimal. Unfortunately, that field is a bit mask, so
it is hard to interpret as a decimal.
Print in hex, so the user can easily see what bits are set and more
importantly what type of info it is conveying.
V2: add 0x in front per Jiri Olsa
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1393386227-149412-3-git-send-email-dzickus@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The __hpp__color_fmt used in the TUI code can be replace by the generic
code with small change in print_fn callback. And it also needs to move
callback function to the generic __hpp__fmt().
No functional changes intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1393809254-4480-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of the pointer to buffer and its size so that it can also get
private argument passed along with hpp.
This is a preparation of further change.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1393809254-4480-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The __hpp__color_fmt used in the gtk code can be replace by the generic
code with small change in print_fn callback.
This is a preparation to upcoming changes and no functional changes
intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1393809254-4480-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The for_each_bench() macro must check that the "benchmarks" field of a
collection is not NULL before dereferencing it because the "all"
collection in particular has a NULL "benchmarks" field (signifying that
it has no benchmarks to iterate over).
This fixes this NULL pointer dereference when running "perf bench all":
[root@ssdandy ~]# perf bench all
<SNIP>
# Running mem/memset benchmark...
# Copying 1MB Bytes ...
2.453675 GB/Sec
12.056327 GB/Sec (with prefault)
Segmentation fault (core dumped)
[root@ssdandy ~]#
Signed-off-by: Patrick Palka <patrick@parcs.ath.cx>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1394664051-6037-1-git-send-email-patrick@parcs.ath.cx
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently if a process creates a bunch of threads using pthread_create
and then perf is run in system_wide mode, the mmaps for those threads
are not captured with a synthesized mmap event.
The reason is those threads are not visible when walking the /proc/
directory looking for /proc/<pid>/maps files. Instead they are
discovered using the /proc/<pid>/tasks file (which the synthesized comm
event uses).
This causes problems when a program is trying to map a data address to a
tid. Because the tid has no maps, the event is dropped. Changing the
program to look up using the pid instead of the tid, finds the correct
maps but creates ugly hacks in the program to carry the correct tid
around.
Fix this by moving the walking of the /proc/<pid>/tasks up a level (out
of the comm function) based on Arnaldo's suggestion.
Tweaked things a bit to special case the 'full' bit and 'guest' check.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1393429527-167840-2-git-send-email-dzickus@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Clarify how to specify x86 registers in perf probe. I recently ran into
this problem and had to figure it out from the source.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/1393596135-4227-3-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Clarify in the documentation that 'perf mem report' reports use-latency,
not load/store-latency on Intel systems.
This often causes confusion with users.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1393596135-4227-2-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Block a bunch of threads on a futex and requeue them on another, N at a
time.
This program is particularly useful to measure the latency of nthread
requeues without waking up any tasks -- thus mimicking a regular
futex_wait.
An example run:
$ perf bench futex requeue -r 100 -t 64
Run summary [PID 151011]: Requeuing 64 threads (from 0x7d15c4 to 0x7d15c8), 1 at a time.
[Run 1]: Requeued 64 of 64 threads in 0.0400 ms
[Run 2]: Requeued 64 of 64 threads in 0.0390 ms
[Run 3]: Requeued 64 of 64 threads in 0.0400 ms
...
[Run 100]: Requeued 64 of 64 threads in 0.0390 ms
Requeued 64 of 64 threads in 0.0399 ms (+-0.37%)
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/r/1387081917-9102-4-git-send-email-davidlohr@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Block a bunch of threads on a futex and wake them up, N at a time.
This program is particularly useful to measure the latency of nthread
wakeups in non-error situations: all waiters are queued and all wake
calls wakeup one or more tasks.
An example run:
$ perf bench futex wake -t 512 -r 100
Run summary [PID 27823]: blocking on 512 threads (at futex 0x7e10d4), waking up 1 at a time.
[Run 1]: Wokeup 512 of 512 threads in 6.0080 ms
[Run 2]: Wokeup 512 of 512 threads in 5.2280 ms
[Run 3]: Wokeup 512 of 512 threads in 4.8300 ms
...
[Run 100]: Wokeup 512 of 512 threads in 5.0100 ms
Wokeup 512 of 512 threads in 5.0109 ms (+-2.25%)
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/r/1387081917-9102-3-git-send-email-davidlohr@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce futexes to perf-bench and add a program that stresses and
measures the kernel's implementation of the hash table.
This is a multi-threaded program that simply measures the amount of
failed futex wait calls - we only want to deal with the hashing
overhead, so a negative return of futex_wait_setup() is enough to do the
trick.
An example run:
$ perf bench futex hash -t 32
Run summary [PID 10989]: 32 threads, each operating on 1024 [private] futexes for 10 secs.
[thread 0] futexes: 0x19d9b10 ... 0x19dab0c [ 418713 ops/sec ]
[thread 1] futexes: 0x19daca0 ... 0x19dbc9c [ 469913 ops/sec ]
[thread 2] futexes: 0x19dbe30 ... 0x19dce2c [ 479744 ops/sec ]
...
[thread 31] futexes: 0x19fbb80 ... 0x19fcb7c [ 464179 ops/sec ]
Averaged 454310 operations/sec (+- 0.84%), total secs = 10
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/r/1387081917-9102-2-git-send-email-davidlohr@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we call just:
perf bench numa mem
it will present the same output as:
perf bench numa mem -h
i.e. ask for instructions about what to run.
While that is kinda ok, using 'run all tests' as the default, i.e.
making 'no parms' be equivalent to:
perf bench numa mem -a
Will allow:
perf bench numa all
to actually do what is asked: i.e. run all the 'bench' tests, instead of
responding to that by asking what to do.
That, in turn, allows:
perf bench all
to actually complete, for the same reasons.
And after that, the tests that come after that, and that at some point
hit a NULL deref, will run, allowing me to reproduce a recently reported
problem.
That when you have the needed numa libraries, which wasn't the case for
the reporter, making me a bit confused after trying to reproduce his
report.
So make no parms mean -a.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Patrick Palka <patrick@parcs.ath.cx>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-x7h0ghx4pef4n0brywg21krk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull networking fixes from David Miller:
"I know this is a bit more than you want to see, and I've told the
wireless folks under no uncertain terms that they must severely scale
back the extent of the fixes they are submitting this late in the
game.
Anyways:
1) vmxnet3's netpoll doesn't perform the equivalent of an ISR, which
is the correct implementation, like it should. Instead it does
something like a NAPI poll operation. This leads to crashes.
From Neil Horman and Arnd Bergmann.
2) Segmentation of SKBs requires proper socket orphaning of the
fragments, otherwise we might access stale state released by the
release callbacks.
This is a 5 patch fix, but the initial patches are giving
variables and such significantly clearer names such that the
actual fix itself at the end looks trivial.
From Michael S. Tsirkin.
3) TCP control block release can deadlock if invoked from a timer on
an already "owned" socket. Fix from Eric Dumazet.
4) In the bridge multicast code, we must validate that the
destination address of general queries is the link local all-nodes
multicast address. From Linus Lüssing.
5) The x86 BPF JIT support for negative offsets puts the parameter
for the helper function call in the wrong register. Fix from
Alexei Starovoitov.
6) The descriptor type used for RTL_GIGA_MAC_VER_17 chips in the
r8169 driver is incorrect. Fix from Hayes Wang.
7) The xen-netback driver tests skb_shinfo(skb)->gso_type bits to see
if a packet is a GSO frame, but that's not the correct test. It
should use skb_is_gso(skb) instead. Fix from Wei Liu.
8) Negative msg->msg_namelen values should generate an error, from
Matthew Leach.
9) at86rf230 can deadlock because it takes the same lock from it's
ISR and it's hard_start_xmit method, without disabling interrupts
in the latter. Fix from Alexander Aring.
10) The FEC driver's restart doesn't perform operations in the correct
order, so promiscuous settings can get lost. Fix from Stefan
Wahren.
11) Fix SKB leak in SCTP cookie handling, from Daniel Borkmann.
12) Reference count and memory leak fixes in TIPC from Ying Xue and
Erik Hugne.
13) Forced eviction in inet_frag_evictor() must strictly make sure all
frags are deleted, otherwise module unload (f.e. 6lowpan) can
crash. Fix from Florian Westphal.
14) Remove assumptions in AF_UNIX's use of csum_partial() (which it
uses as a hash function), which breaks on PowerPC. From Anton
Blanchard.
The main gist of the issue is that csum_partial() is defined only
as a value that, once folded (f.e. via csum_fold()) produces a
correct 16-bit checksum. It is legitimate, therefore, for
csum_partial() to produce two different 32-bit values over the
same data if their respective alignments are different.
15) Fix endiannes bug in MAC address handling of ibmveth driver, also
from Anton Blanchard.
16) Error checks for ipv6 exthdrs offload registration are reversed,
from Anton Nayshtut.
17) Externally triggered ipv6 addrconf routes should count against the
garbage collection threshold. Fix from Sabrina Dubroca.
18) The PCI shutdown handler added to the bnx2 driver can wedge the
chip if it was not brought up earlier already, which in particular
causes the firmware to shut down the PHY. Fix from Michael Chan.
19) Adjust the sanity WARN_ON_ONCE() in qdisc_list_add() because as
currently coded it can and does trigger in legitimate situations.
From Eric Dumazet.
20) BNA driver fails to build on ARM because of a too large udelay()
call, fix from Ben Hutchings.
21) Fair-Queue qdisc holds locks during GFP_KERNEL allocations, fix
from Eric Dumazet.
22) The vlan passthrough ops added in the previous release causes a
regression in source MAC address setting of outgoing headers in
some circumstances. Fix from Peter Boström"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (70 commits)
ipv6: Avoid unnecessary temporary addresses being generated
eth: fec: Fix lost promiscuous mode after reconnecting cable
bonding: set correct vlan id for alb xmit path
at86rf230: fix lockdep splats
net/mlx4_en: Deregister multicast vxlan steering rules when going down
vmxnet3: fix building without CONFIG_PCI_MSI
MAINTAINERS: add networking selftests to NETWORKING
net: socket: error on a negative msg_namelen
MAINTAINERS: Add tools/net to NETWORKING [GENERAL]
packet: doc: Spelling s/than/that/
net/mlx4_core: Load the IB driver when the device supports IBoE
net/mlx4_en: Handle vxlan steering rules for mac address changes
net/mlx4_core: Fix wrong dump of the vxlan offloads device capability
xen-netback: use skb_is_gso in xenvif_start_xmit
r8169: fix the incorrect tx descriptor version
tools/net/Makefile: Define PACKAGE to fix build problems
x86: bpf_jit: support negative offsets
bridge: multicast: enable snooping on general queries only
bridge: multicast: add sanity check for general query destination
tcp: tcp_release_cb() should release socket ownership
...
Fixes the following build failure:
cc -g -O2 -Wall -I. -I ../../usr/include/ -Wno-pointer-sign
-fno-strict-overflow -fno-strict-aliasing -fno-common -MMD
-U_FORTIFY_SOURCE -c -o virtio_test.o virtio_test.c
virtio_test.c: In function ‘run_test’:
virtio_test.c:176:7: error: expected ‘)’ before ‘r’
r = -1;
^
Fixes: 53c18c9906 (virtio_test: verify if virtqueue_kick() succeeded)
Cc: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In commit bb478d8b16 virtio_ring: plug kmemleak false positive,
kmemleak_ignore was introduced. This broke compilation of virtio_test:
cc -g -O2 -Wall -I. -I ../../usr/include/ -Wno-pointer-sign
-fno-strict-overflow -fno-strict-aliasing -fno-common -MMD
-U_FORTIFY_SOURCE -c -o virtio_ring.o ../../drivers/virtio/virtio_ring.c
../../drivers/virtio/virtio_ring.c: In function ‘vring_add_indirect’:
../../drivers/virtio/virtio_ring.c:177:2: warning: implicit declaration
of function ‘kmemleak_ignore’ [-Wimplicit-function-declaration]
kmemleak_ignore(desc);
^
cc virtio_test.o virtio_ring.o -o virtio_test
virtio_ring.o: In function `vring_add_indirect':
tools/virtio/../../drivers/virtio/virtio_ring.c:177:
undefined reference to `kmemleak_ignore'
Add a dummy header for tools/virtio, and add #incldue <linux/kmemleak.h>
to drivers/virtio/virtio_ring.c so it is picked up by the userspace
tools.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The virtio headers have changed recently:
5b1bf7cb67 virtio_ring: let virtqueue_{kick()/notify()} return a bool
46f9c2b925 virtio_ring: change host notification API
Update the internal copies to fix the build of virtio_test:
cc -g -O2 -Wall -I. -I ../../usr/include/ -Wno-pointer-sign
-fno-strict-overflow -fno-strict-aliasing -fno-common -MMD -U_FORTIFY_SOURCE
-c -o virtio_test.o virtio_test.c
In file included from virtio_test.c:15:0:
./linux/virtio.h:76:19: error: conflicting types for ‘vring_new_virtqueue’
struct virtqueue *vring_new_virtqueue(unsigned int index,
^
In file included from ./linux/virtio_ring.h:1:0,
from ../../usr/include/linux/vhost.h:17,
from virtio_test.c:14:
./linux/../../../include/linux/virtio_ring.h:68:19: note: previous
declaration of ‘vring_new_virtqueue’ was here
struct virtqueue *vring_new_virtqueue(unsigned int index,
virtio_test.c: In function ‘vq_info_add’:
virtio_test.c:103:12: warning: passing argument 7 of ‘vring_new_virtqueue’
from incompatible pointer type [enabled by default]
vq_notify, vq_callback, "test");
^
In file included from virtio_test.c:15:0:
./linux/virtio.h:76:19: note: expected ‘void (*)(struct virtqueue *)’ but
argument is of type ‘_Bool (*)(struct virtqueue *)’
struct virtqueue *vring_new_virtqueue(unsigned int index,
^
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes the following build problem with binutils-2.24
gcc -Wall -O2 -c -o bpf_jit_disasm.o bpf_jit_disasm.c
In file included from bpf_jit_disasm.c:25:0:
/usr/include/bfd.h:35:2: error: #error config.h must be included
before this header
#error config.h must be included before this header
This is similar to commit 3ce711a6ab
"perf tools: bfd.h/libbfd detection fails with recent binutils"
See: https://sourceware.org/bugzilla/show_bug.cgi?id=14243
CC: David S. Miller <davem@davemloft.net>
CC: Daniel Borkmann <dborkman@redhat.com>
CC: netdev@vger.kernel.org
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
User space callchains and user space stack dump were disabled
for function trace event. Mailing list discussions:
http://marc.info/?t=139302086500001&r=1&w=2http://marc.info/?t=139301437300003&r=1&w=2
Catching up with perf and disabling user space callchains and
DWARF unwind (uses user stack dump) for function trace event.
Adding following warnings when callchains are used
for function trace event:
# perf record -g -e ftrace:function ...
Disabling user space callchains for function trace event.
...
# ./perf record --call-graph=dwarf -e ftrace:function ...
Cannot use DWARF unwind for function trace event, falling back to framepointers.
Disabling user space callchains for function trace event.
...
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1393775800-13524-4-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
. Fix build of 'trace' in some systems due to using some architecture-specific
signal numbers (Ben Hutchings)
. Stop resolving when finding a map in in ip__resolve_ams, this way at least
the DSO will be resolved when a symbol isn't (Don Zickus)
. Fix crash in elf_section_by_name when not checking if some section string index
is valid (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=oyOq
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
* Fix build of 'trace' in some systems due to using some architecture-specific
signal numbers (Ben Hutchings)
* Stop resolving when finding a map in in ip__resolve_ams, this way at least
the DSO will be resolved when a symbol isn't (Don Zickus)
* Fix crash in elf_section_by_name when not checking if some section string index
is valid (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A failed msgget causes the test to return an uninitialised value in ret.
Assign ret to -errno on error exit.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
