Commit Graph

315 Commits

Author SHA1 Message Date
Stefano Garzarella
4b5f1ad556 vsock/virtio: initialize vdev->priv before using VQs
When we fill VQs with empty buffers and kick the host, it may send
an interrupt. `vdev->priv` must be initialized before this since it
is used in the virtqueue callbacks.

Fixes: 0deab087b1 ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock")
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-24 18:36:35 -07:00
Jiyong Park
8e6ed96376 vsock: each transport cycles only on its own sockets
When iterating over sockets using vsock_for_each_connected_socket, make
sure that a transport filters out sockets that don't belong to the
transport.

There actually was an issue caused by this; in a nested VM
configuration, destroying the nested VM (which often involves the
closing of /dev/vhost-vsock if there was h2g connections to the nested
VM) kills not only the h2g connections, but also all existing g2h
connections to the (outmost) host which are totally unrelated.

Tested: Executed the following steps on Cuttlefish (Android running on a
VM) [1]: (1) Enter into an `adb shell` session - to have a g2h
connection inside the VM, (2) open and then close /dev/vhost-vsock by
`exec 3< /dev/vhost-vsock && exec 3<&-`, (3) observe that the adb
session is not reset.

[1] https://android.googlesource.com/device/google/cuttlefish/

Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jiyong Park <jiyong@google.com>
Link: https://lore.kernel.org/r/20220311020017.1509316-1-jiyong@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-11 23:14:19 -08:00
Seth Forshee
b9208492fc vsock: remove vsock from connected table when connect is interrupted by a signal
vsock_connect() expects that the socket could already be in the
TCP_ESTABLISHED state when the connecting task wakes up with a signal
pending. If this happens the socket will be in the connected table, and
it is not removed when the socket state is reset. In this situation it's
common for the process to retry connect(), and if the connection is
successful the socket will be added to the connected table a second
time, corrupting the list.

Prevent this by calling vsock_remove_connected() if a signal is received
while waiting for a connection. This is harmless if the socket is not in
the connected table, and if it is in the table then removing it will
prevent list corruption from a double add.

Note for backporting: this patch requires d5afa82c97 ("vsock: correct
removal of socket from the list"), which is in all current stable trees
except 4.9.y.

Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Seth Forshee <sforshee@digitalocean.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20220217141312.2297547-1-sforshee@digitalocean.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17 08:56:02 -08:00
Linus Torvalds
3bf6a9e36e virtio,vdpa,qemu_fw_cfg: features, cleanups, fixes
partial support for < MAX_ORDER - 1 granularity for virtio-mem
 driver_override for vdpa
 sysfs ABI documentation for vdpa
 multiqueue config support for mlx5 vdpa
 
 Misc fixes, cleanups.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmHiDHkPHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRpVT4H/3Veixt3uYPOmuLU2tSx+8X+sFTtik81hyiE
 okz5fRJrxxA8SqS76FnmO10FS4hlPOGNk0Z5WVhr0yihwFvPLvpCM/xi2Lmrz9I7
 pB0sXOIocEL1xApsxukR9K1Twpb2hfYsflbJYUVlRfhS5G0izKJNZp5I7OPrzd80
 vVNNDWKW2iLDlfqsavumI4Kvm4nsFuCHG03jzMtcIa7YTXYV3DORD4ZGFFVUOIQN
 t5F74TznwHOeYgJeg7TzjFjfPWmXjLetvx10QX1A1uOvwppWW/QY6My0UafTXNXj
 VB3gOwJPf+gxXAXl/4bafq4NzM0xys6cpcPpjvhmU+erY4UuyAU=
 =Y1eO
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio updates from Michael Tsirkin:
 "virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes.

   - partial support for < MAX_ORDER - 1 granularity for virtio-mem

   - driver_override for vdpa

   - sysfs ABI documentation for vdpa

   - multiqueue config support for mlx5 vdpa

   - and misc fixes, cleanups"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits)
  vdpa/mlx5: Fix tracking of current number of VQs
  vdpa/mlx5: Fix is_index_valid() to refer to features
  vdpa: Protect vdpa reset with cf_mutex
  vdpa: Avoid taking cf_mutex lock on get status
  vdpa/vdpa_sim_net: Report max device capabilities
  vdpa: Use BIT_ULL for bit operations
  vdpa/vdpa_sim: Configure max supported virtqueues
  vdpa/mlx5: Report max device capabilities
  vdpa: Support reporting max device capabilities
  vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
  vdpa: Add support for returning device configuration information
  vdpa/mlx5: Support configuring max data virtqueue
  vdpa/mlx5: Fix config_attr_mask assignment
  vdpa: Allow to configure max data virtqueues
  vdpa: Read device configuration only if FEATURES_OK
  vdpa: Sync calls set/get config/status with cf_mutex
  vdpa/mlx5: Distribute RX virtqueues in RQT object
  vdpa: Provide interface to read driver features
  vdpa: clean up get_config_size ret value handling
  virtio_ring: mark ring unused on error
  ...
2022-01-18 10:05:48 +02:00
Michael S. Tsirkin
d9679d0013 virtio: wrap config->reset calls
This will enable cleanups down the road.
The idea is to disable cbs, then add "flush_queued_cbs" callback
as a parameter, this way drivers can flush any work
queued after callbacks have been disabled.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-14 18:50:52 -05:00
David S. Miller
e63a023489 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:

====================
pull-request: bpf-next 2021-12-30

The following pull-request contains BPF updates for your *net-next* tree.

We've added 72 non-merge commits during the last 20 day(s) which contain
a total of 223 files changed, 3510 insertions(+), 1591 deletions(-).

The main changes are:

1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii.

2) Beautify and de-verbose verifier logs, from Christy.

3) Composable verifier types, from Hao.

4) bpf_strncmp helper, from Hou.

5) bpf.h header dependency cleanup, from Jakub.

6) get_func_[arg|ret|arg_cnt] helpers, from Jiri.

7) Sleepable local storage, from KP.

8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31 14:35:40 +00:00
Jakub Kicinski
b6459415b3 net: Don't include filter.h from net/sock.h
sock.h is pretty heavily used (5k objects rebuilt on x86 after
it's touched). We can drop the include of filter.h from it and
add a forward declaration of struct sk_filter instead.
This decreases the number of rebuilt objects when bpf.h
is touched from ~5k to ~1k.

There's a lot of missing includes this was masking. Primarily
in networking tho, this time.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/bpf/20211229004913.513372-1-kuba@kernel.org
2021-12-29 08:48:14 -08:00
Jakub Kicinski
7cd2802d74 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-16 16:13:19 -08:00
Wei Wang
1db8f5fc2e virtio/vsock: fix the transport to work with VMADDR_CID_ANY
The VMADDR_CID_ANY flag used by a socket means that the socket isn't bound
to any specific CID. For example, a host vsock server may want to be bound
with VMADDR_CID_ANY, so that a guest vsock client can connect to the host
server with CID=VMADDR_CID_HOST (i.e. 2), and meanwhile, a host vsock
client can connect to the same local server with CID=VMADDR_CID_LOCAL
(i.e. 1).

The current implementation sets the destination socket's svm_cid to a
fixed CID value after the first client's connection, which isn't an
expected operation. For example, if the guest client first connects to the
host server, the server's svm_cid gets set to VMADDR_CID_HOST, then other
host clients won't be able to connect to the server anymore.

Reproduce steps:
1. Run the host server:
   socat VSOCK-LISTEN:1234,fork -
2. Run a guest client to connect to the host server:
   socat - VSOCK-CONNECT:2:1234
3. Run a host client to connect to the host server:
   socat - VSOCK-CONNECT:1:1234

Without this patch, step 3. above fails to connect, and socat complains
"socat[1720] E connect(5, AF=40 cid:1 port:1234, 16): Connection
reset by peer".
With this patch, the above works well.

Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Link: https://lore.kernel.org/r/20211126011823.1760-1-wei.w.wang@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2021-12-08 15:41:50 -05:00
Kees Cook
c0e084e342 hv_sock: Extract hvs_send_data() helper that takes only header
When building under -Warray-bounds, the compiler is especially
conservative when faced with casts from a smaller object to a larger
object. While this has found many real bugs, there are some cases that
are currently false positives (like here). With this as one of the last
few instances of the warning in the kernel before -Warray-bounds can be
enabled globally, rearrange the functions so that there is a header-only
version of hvs_send_data(). Silences this warning:

net/vmw_vsock/hyperv_transport.c: In function 'hvs_shutdown_lock_held.constprop':
net/vmw_vsock/hyperv_transport.c:231:32: warning: array subscript 'struct hvs_send_buf[0]' is partly outside array bounds of 'struct vmpipe_proto_header[1]' [-Warray-bounds]
  231 |         send_buf->hdr.pkt_type = 1;
      |         ~~~~~~~~~~~~~~~~~~~~~~~^~~
net/vmw_vsock/hyperv_transport.c:465:36: note: while referencing 'hdr'
  465 |         struct vmpipe_proto_header hdr;
      |                                    ^~~

This change results in no executable instruction differences.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20211207063217.2591451-1-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-07 21:49:19 -08:00
Eiichi Tsukata
c7cd82b905 vsock: prevent unnecessary refcnt inc for nonblocking connect
Currently vosck_connect() increments sock refcount for nonblocking
socket each time it's called, which can lead to memory leak if
it's called multiple times because connect timeout function decrements
sock refcount only once.

Fixes it by making vsock_connect() return -EALREADY immediately when
sock state is already SS_CONNECTING.

Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10 14:36:11 +00:00
Richard Palethorpe
4c1e34c0db vsock: Enable y2038 safe timeval for timeout
Reuse the timeval compat code from core/sock to handle 32-bit and
64-bit timeval structures. Also introduce a new socket option define
to allow using y2038 safe timeval under 32-bit.

The existing behavior of sock_set_timeout and vsock's timeout setter
differ when the time value is out of bounds. vsocks current behavior
is retained at the expense of not being able to share the full
implementation.

This allows the LTP test vsock01 to pass under 32-bit compat mode.

Fixes: fe0c72f3db ("socket: move compat timeout handling into sock.c")
Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com>
Cc: Richard Palethorpe <rpalethorpe@richiejp.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08 16:21:53 +01:00
Richard Palethorpe
685c3f2fba vsock: Refactor vsock_*_getsockopt to resemble sock_getsockopt
In preparation for sharing the implementation of sock_get_timeout.

Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com>
Cc: Richard Palethorpe <rpalethorpe@richiejp.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08 16:21:53 +01:00
Arseny Krasnov
8fc92b7c15 af_vsock: rename variables in receive loop
Record is supported via MSG_EOR flag, while current logic operates
with message, so rename variables from 'record' to 'message'.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210903123306.3273757-1-arseny.krasnov@kaspersky.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-06 02:25:16 -04:00
Arseny Krasnov
8d5ac871b5 virtio/vsock: support MSG_EOR bit processing
If packet has 'EOR' bit - set MSG_EOR in 'recvmsg()' flags.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210903123251.3273639-1-arseny.krasnov@kaspersky.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-05 16:23:09 -04:00
Arseny Krasnov
9af8f10616 virtio/vsock: rename 'EOR' to 'EOM' bit.
This current implemented bit is used to mark end of messages
('EOM' - end of message), not records('EOR' - end of record).
Also rename 'record' to 'message' in implementation as it is
different things.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210903123109.3273053-1-arseny.krasnov@kaspersky.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-05 16:23:08 -04:00
Longpeng(Mike)
49b0b6ffe2 vsock/virtio: avoid potential deadlock when vsock device remove
There's a potential deadlock case when remove the vsock device or
process the RESET event:

  vsock_for_each_connected_socket:
      spin_lock_bh(&vsock_table_lock) ----------- (1)
      ...
          virtio_vsock_reset_sock:
              lock_sock(sk) --------------------- (2)
      ...
      spin_unlock_bh(&vsock_table_lock)

lock_sock() may do initiative schedule when the 'sk' is owned by
other thread at the same time, we would receivce a warning message
that "scheduling while atomic".

Even worse, if the next task (selected by the scheduler) try to
release a 'sk', it need to request vsock_table_lock and the deadlock
occur, cause the system into softlockup state.
  Call trace:
   queued_spin_lock_slowpath
   vsock_remove_bound
   vsock_remove_sock
   virtio_transport_release
   __vsock_release
   vsock_release
   __sock_release
   sock_close
   __fput
   ____fput

So we should not require sk_lock in this case, just like the behavior
in vhost_vsock or vmci.

Fixes: 0ea9e1d3a9 ("VSOCK: Introduce virtio_transport.ko")
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210812053056.1699-1-longpeng2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-12 10:57:27 -07:00
Harshavardhan Unnibhavi
e3ea110d6e VSOCK: handle VIRTIO_VSOCK_OP_CREDIT_REQUEST
The original implementation of the virtio-vsock driver does not
handle a VIRTIO_VSOCK_OP_CREDIT_REQUEST as required by the
virtio-vsock specification. The vsock device emulated by
vhost-vsock and the virtio-vsock driver never uses this request,
which was probably why nobody noticed it. However, another
implementation of the device may use this request type.

Hence, this commit introduces a way to handle an explicit credit
request by responding with a corresponding credit update as
required by the virtio-vsock specification.

Fixes: 06a8fc7836 ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: Harshavardhan Unnibhavi <harshanavkis@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20210802173506.2383-1-harshanavkis@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-03 14:30:59 -07:00
Linus Torvalds
dbe69e4337 Networking changes for 5.14.
Core:
 
  - BPF:
    - add syscall program type and libbpf support for generating
      instructions and bindings for in-kernel BPF loaders (BPF loaders
      for BPF), this is a stepping stone for signed BPF programs
    - infrastructure to migrate TCP child sockets from one listener
      to another in the same reuseport group/map to improve flexibility
      of service hand-off/restart
    - add broadcast support to XDP redirect
 
  - allow bypass of the lockless qdisc to improving performance
    (for pktgen: +23% with one thread, +44% with 2 threads)
 
  - add a simpler version of "DO_ONCE()" which does not require
    jump labels, intended for slow-path usage
 
  - virtio/vsock: introduce SOCK_SEQPACKET support
 
  - add getsocketopt to retrieve netns cookie
 
  - ip: treat lowest address of a IPv4 subnet as ordinary unicast address
        allowing reclaiming of precious IPv4 addresses
 
  - ipv6: use prandom_u32() for ID generation
 
  - ip: add support for more flexible field selection for hashing
        across multi-path routes (w/ offload to mlxsw)
 
  - icmp: add support for extended RFC 8335 PROBE (ping)
 
  - seg6: add support for SRv6 End.DT46 behavior
 
  - mptcp:
     - DSS checksum support (RFC 8684) to detect middlebox meddling
     - support Connection-time 'C' flag
     - time stamping support
 
  - sctp: packetization Layer Path MTU Discovery (RFC 8899)
 
  - xfrm: speed up state addition with seq set
 
  - WiFi:
     - hidden AP discovery on 6 GHz and other HE 6 GHz improvements
     - aggregation handling improvements for some drivers
     - minstrel improvements for no-ack frames
     - deferred rate control for TXQs to improve reaction times
     - switch from round robin to virtual time-based airtime scheduler
 
  - add trace points:
     - tcp checksum errors
     - openvswitch - action execution, upcalls
     - socket errors via sk_error_report
 
 Device APIs:
 
  - devlink: add rate API for hierarchical control of max egress rate
             of virtual devices (VFs, SFs etc.)
 
  - don't require RCU read lock to be held around BPF hooks
    in NAPI context
 
  - page_pool: generic buffer recycling
 
 New hardware/drivers:
 
  - mobile:
     - iosm: PCIe Driver for Intel M.2 Modem
     - support for Qualcomm MSM8998 (ipa)
 
  - WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
 
  - sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
 
  - Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
 
  - NXP SJA1110 Automotive Ethernet 10-port switch
 
  - Qualcomm QCA8327 switch support (qca8k)
 
  - Mikrotik 10/25G NIC (atl1c)
 
 Driver changes:
 
  - ACPI support for some MDIO, MAC and PHY devices from Marvell and NXP
    (our first foray into MAC/PHY description via ACPI)
 
  - HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
 
  - Mellanox/Nvidia NIC (mlx5)
    - NIC VF offload of L2 bridging
    - support IRQ distribution to Sub-functions
 
  - Marvell (prestera):
     - add flower and match all
     - devlink trap
     - link aggregation
 
  - Netronome (nfp): connection tracking offload
 
  - Intel 1GE (igc): add AF_XDP support
 
  - Marvell DPU (octeontx2): ingress ratelimit offload
 
  - Google vNIC (gve): new ring/descriptor format support
 
  - Qualcomm mobile (rmnet & ipa): inline checksum offload support
 
  - MediaTek WiFi (mt76)
     - mt7915 MSI support
     - mt7915 Tx status reporting
     - mt7915 thermal sensors support
     - mt7921 decapsulation offload
     - mt7921 enable runtime pm and deep sleep
 
  - Realtek WiFi (rtw88)
     - beacon filter support
     - Tx antenna path diversity support
     - firmware crash information via devcoredump
 
  - Qualcomm 60GHz WiFi (wcn36xx)
     - Wake-on-WLAN support with magic packets and GTK rekeying
 
  - Micrel PHY (ksz886x/ksz8081): add cable test support
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmDb+fUACgkQMUZtbf5S
 Irs2Jg//aqN0Q8CgIvYCVhPxQw1tY7pTAbgyqgBZ01vwjyvtIOgJiWzSfFEU84mX
 M8fcpFX5eTKrOyJ9S6UFfQ/JG114n3hjAxFFT4Hxk2gC1Tg0vHuFQTDHcUl28bUE
 mTm61e1YpdorILnv2k5JVQ/wu0vs5QKDrjcYcrcPnh+j93wvnPOgAfDBV95nZzjS
 OTt4q2fR8GzLcSYWWsclMbDNkzyTG50RW/0Yd6aGjr5QGvXfrMeXfUJNz533PMf/
 w5lNyjRKv+x9mdTZJzU0+msNUrZgUdRz7W8Ey8lD3hJZRE+D6/uU7FtsE8Mi3+uc
 HWxeZUyzA3YF1MfVl/eesbxyPT7S/OkLzk4O5B35FbqP0YltaP+bOjq1/nM3ce1/
 io9Dx9pIl/2JANUgRCAtLi8Z2dkvRoqTaBxZ/nPudCCljFwDwl6joTMJ7Ow22i5Y
 5aIkcXFmZq4LbJDiHvbTlqT7yiuaEvu2UK/23bSIg/K3nF4eAmkY9Y1EgiMf60OF
 78Ttw0wk2tUegwaS5MZnCniKBKDyl9gM2F6rbZ/IxQRR2LTXFc1B6gC+ynUxgXfh
 Ub8O++6qGYGYZ0XvQH4pzco79p3qQWBTK5beIp2eu6BOAjBVIXq4AibUfoQLACsu
 hX7jMPYd0kc3WFgUnKgQP8EnjFSwbf4XiaE7fIXvWBY8hzCw2h4=
 =LvtX
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - BPF:
      - add syscall program type and libbpf support for generating
        instructions and bindings for in-kernel BPF loaders (BPF loaders
        for BPF), this is a stepping stone for signed BPF programs
      - infrastructure to migrate TCP child sockets from one listener to
        another in the same reuseport group/map to improve flexibility
        of service hand-off/restart
      - add broadcast support to XDP redirect

   - allow bypass of the lockless qdisc to improving performance (for
     pktgen: +23% with one thread, +44% with 2 threads)

   - add a simpler version of "DO_ONCE()" which does not require jump
     labels, intended for slow-path usage

   - virtio/vsock: introduce SOCK_SEQPACKET support

   - add getsocketopt to retrieve netns cookie

   - ip: treat lowest address of a IPv4 subnet as ordinary unicast
     address allowing reclaiming of precious IPv4 addresses

   - ipv6: use prandom_u32() for ID generation

   - ip: add support for more flexible field selection for hashing
     across multi-path routes (w/ offload to mlxsw)

   - icmp: add support for extended RFC 8335 PROBE (ping)

   - seg6: add support for SRv6 End.DT46 behavior

   - mptcp:
      - DSS checksum support (RFC 8684) to detect middlebox meddling
      - support Connection-time 'C' flag
      - time stamping support

   - sctp: packetization Layer Path MTU Discovery (RFC 8899)

   - xfrm: speed up state addition with seq set

   - WiFi:
      - hidden AP discovery on 6 GHz and other HE 6 GHz improvements
      - aggregation handling improvements for some drivers
      - minstrel improvements for no-ack frames
      - deferred rate control for TXQs to improve reaction times
      - switch from round robin to virtual time-based airtime scheduler

   - add trace points:
      - tcp checksum errors
      - openvswitch - action execution, upcalls
      - socket errors via sk_error_report

  Device APIs:

   - devlink: add rate API for hierarchical control of max egress rate
     of virtual devices (VFs, SFs etc.)

   - don't require RCU read lock to be held around BPF hooks in NAPI
     context

   - page_pool: generic buffer recycling

  New hardware/drivers:

   - mobile:
      - iosm: PCIe Driver for Intel M.2 Modem
      - support for Qualcomm MSM8998 (ipa)

   - WiFi: Qualcomm QCN9074 and WCN6855 PCI devices

   - sparx5: Microchip SparX-5 family of Enterprise Ethernet switches

   - Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)

   - NXP SJA1110 Automotive Ethernet 10-port switch

   - Qualcomm QCA8327 switch support (qca8k)

   - Mikrotik 10/25G NIC (atl1c)

  Driver changes:

   - ACPI support for some MDIO, MAC and PHY devices from Marvell and
     NXP (our first foray into MAC/PHY description via ACPI)

   - HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx

   - Mellanox/Nvidia NIC (mlx5)
      - NIC VF offload of L2 bridging
      - support IRQ distribution to Sub-functions

   - Marvell (prestera):
      - add flower and match all
      - devlink trap
      - link aggregation

   - Netronome (nfp): connection tracking offload

   - Intel 1GE (igc): add AF_XDP support

   - Marvell DPU (octeontx2): ingress ratelimit offload

   - Google vNIC (gve): new ring/descriptor format support

   - Qualcomm mobile (rmnet & ipa): inline checksum offload support

   - MediaTek WiFi (mt76)
      - mt7915 MSI support
      - mt7915 Tx status reporting
      - mt7915 thermal sensors support
      - mt7921 decapsulation offload
      - mt7921 enable runtime pm and deep sleep

   - Realtek WiFi (rtw88)
      - beacon filter support
      - Tx antenna path diversity support
      - firmware crash information via devcoredump

   - Qualcomm WiFi (wcn36xx)
      - Wake-on-WLAN support with magic packets and GTK rekeying

   - Micrel PHY (ksz886x/ksz8081): add cable test support"

* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
  tcp: change ICSK_CA_PRIV_SIZE definition
  tcp_yeah: check struct yeah size at compile time
  gve: DQO: Fix off by one in gve_rx_dqo()
  stmmac: intel: set PCI_D3hot in suspend
  stmmac: intel: Enable PHY WOL option in EHL
  net: stmmac: option to enable PHY WOL with PMT enabled
  net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
  net: use netdev_info in ndo_dflt_fdb_{add,del}
  ptp: Set lookup cookie when creating a PTP PPS source.
  net: sock: add trace for socket errors
  net: sock: introduce sk_error_report
  net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
  net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
  net: dsa: include fdb entries pointing to bridge in the host fdb list
  net: dsa: include bridge addresses which are local in the host fdb list
  net: dsa: sync static FDB entries on foreign interfaces to hardware
  net: dsa: install the host MDB and FDB entries in the master's RX filter
  net: dsa: reference count the FDB addresses at the cross-chip notifier level
  net: dsa: introduce a separate cross-chip notifier type for host FDBs
  net: dsa: reference count the MDB entries at the cross-chip notifier level
  ...
2021-06-30 15:51:09 -07:00
Jakub Kicinski
b6df00789e Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Trivial conflict in net/netfilter/nf_tables_api.c.

Duplicate fix in tools/testing/selftests/net/devlink_port_split.py
- take the net-next version.

skmsg, and L4 bpf - keep the bpf code but remove the flags
and err params.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-29 15:45:27 -07:00
Alexander Aring
e3ae2365ef net: sock: introduce sk_error_report
This patch introduces a function wrapper to call the sk_error_report
callback. That will prepare to add additional handling whenever
sk_error_report is called, for example to trace socket errors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-29 11:28:21 -07:00
Eric Dumazet
64295f0d01 virtio/vsock: avoid NULL deref in virtio_transport_seqpacket_allow()
Make sure the_virtio_vsock is not NULL before dereferencing it.

general protection fault, probably for non-canonical address 0xdffffc0000000071: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000388-0x000000000000038f]
CPU: 0 PID: 8452 Comm: syz-executor406 Not tainted 5.13.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:virtio_transport_seqpacket_allow+0xbf/0x210 net/vmw_vsock/virtio_transport.c:503
Code: e8 c6 d9 ab f8 84 db 0f 84 0f 01 00 00 e8 09 d3 ab f8 48 8d bd 88 03 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 2a 01 00 00 44 0f b6 a5 88 03 00 00
RSP: 0018:ffffc90003757c18 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: 0000000000000071 RSI: ffffffff88c908e7 RDI: 0000000000000388
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff88c90a06 R11: 0000000000000000 R12: 0000000000000000
R13: ffffffff88c90840 R14: 0000000000000000 R15: 0000000000000001
FS:  0000000001bee300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000082 CR3: 000000002847e000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 vsock_assign_transport+0x575/0x700 net/vmw_vsock/af_vsock.c:490
 vsock_connect+0x200/0xc00 net/vmw_vsock/af_vsock.c:1337
 __sys_connect_file+0x155/0x1a0 net/socket.c:1824
 __sys_connect+0x161/0x190 net/socket.c:1841
 __do_sys_connect net/socket.c:1851 [inline]
 __se_sys_connect net/socket.c:1848 [inline]
 __x64_sys_connect+0x6f/0xb0 net/socket.c:1848
 do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x43ee69
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd49e7c788 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000400488 RCX: 000000000043ee69
RDX: 0000000000000010 RSI: 0000000020000080 RDI: 0000000000000003
RBP: 0000000000402e50 R08: 0000000000000000 R09: 0000000000400488
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000402ee0
R13: 0000000000000000 R14: 00000000004ac018 R15: 0000000000400488

Fixes: 53efbba12c ("virtio/vsock: enable SEQPACKET for transport")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22 09:49:37 -07:00
Longpeng(Mike)
c7ff9cff70 vsock: notify server to shutdown when client has pending signal
The client's sk_state will be set to TCP_ESTABLISHED if the server
replay the client's connect request.

However, if the client has pending signal, its sk_state will be set
to TCP_CLOSE without notify the server, so the server will hold the
corrupt connection.

            client                        server

1. sk_state=TCP_SYN_SENT         |
2. call ->connect()              |
3. wait reply                    |
                                 | 4. sk_state=TCP_ESTABLISHED
                                 | 5. insert to connected list
                                 | 6. reply to the client
7. sk_state=TCP_ESTABLISHED      |
8. insert to connected list      |
9. *signal pending* <--------------------- the user kill client
10. sk_state=TCP_CLOSE           |
client is exiting...             |
11. call ->release()             |
     virtio_transport_close
      if (!(sk->sk_state == TCP_ESTABLISHED ||
	      sk->sk_state == TCP_CLOSING))
		return true; *return at here, the server cannot notice the connection is corrupt*

So the client should notify the peer in this case.

Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jorgen Hansen <jhansen@vmware.com>
Cc: Norbert Slusarek <nslusarek@gmx.net>
Cc: Andra Paraschiv <andraprs@amazon.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Brazdil <dbrazdil@google.com>
Cc: Alexander Popov <alex.popov@linux.com>
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lkml.org/lkml/2021/5/17/418
Signed-off-by: lixianming <lixianming5@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 14:43:28 -07:00
Stefano Garzarella
91aa49a8fa vsock/virtio: remove redundant copy_failed variable
When memcpy_to_msg() fails in virtio_transport_seqpacket_do_dequeue(),
we already set `dequeued_len` with the negative error value returned
by memcpy_to_msg().

So we can directly check `dequeued_len` value instead of using a
dedicated flag variable to skip the copy path for the rest of
fragments.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18 12:59:53 -07:00
Stefano Garzarella
0de5b2e672 vsock: rename vsock_wait_data()
vsock_wait_data() is used only by STREAM and SEQPACKET sockets,
so let's rename it to vsock_connectible_wait_data(), using the same
nomenclature (connectible) used in other functions after the
introduction of SEQPACKET.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18 12:59:53 -07:00
Stefano Garzarella
cc97141afd vsock: rename vsock_has_data()
vsock_has_data() is used only by STREAM and SEQPACKET sockets,
so let's rename it to vsock_connectible_has_data(), using the same
nomenclature (connectible) used in other functions after the
introduction of SEQPACKET.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18 12:59:53 -07:00
Arseny Krasnov
6e90a57795 vsock/loopback: enable SEQPACKET for transport
Add SEQPACKET ops for loopback transport and 'seqpacket_allow()'
callback.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 13:32:47 -07:00
Arseny Krasnov
53efbba12c virtio/vsock: enable SEQPACKET for transport
To make transport work with SOCK_SEQPACKET add two things:
1) SOCK_SEQPACKET ops for virtio transport and 'seqpacket_allow()'
   callback.
2) Handling of SEQPACKET bit: guest tries to negotiate it with vhost,
   so feature will be enabled only if bit is negotiated with device.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 13:32:47 -07:00
Arseny Krasnov
9ac841f5e9 virtio/vsock: rest of SOCK_SEQPACKET support
Small updates to make SOCK_SEQPACKET work:
1) Send SHUTDOWN on socket close for SEQPACKET type.
2) Set SEQPACKET packet type during send.
3) Set 'VIRTIO_VSOCK_SEQ_EOR' bit in flags for last
   packet of message.
4) Implement data check function for SEQPACKET.
5) Check for max datagram size.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 13:32:47 -07:00
Arseny Krasnov
e4b1ef152f virtio/vsock: add SEQPACKET receive logic
Update current receive logic for SEQPACKET support: performs
check for packet and socket types on receive(if mismatch, then
reset connection). Increment EOR counter on receive. Also if
buffer of new packet was appended to buffer of last packet in
rx queue, update flags of last packet with flags of new packet.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 13:32:47 -07:00
Arseny Krasnov
44931195a5 virtio/vsock: dequeue callback for SOCK_SEQPACKET
Callback fetches RW packets from rx queue of socket until whole record
is copied(if user's buffer is full, user is not woken up). This is done
to not stall sender, because if we wake up user and it leaves syscall,
nobody will send credit update for rest of record, and sender will wait
for next enter of read syscall at receiver's side. So if user buffer is
full, we just send credit update and drop data.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 13:32:47 -07:00
Arseny Krasnov
c10844c597 virtio/vsock: simplify credit update function API
This function is static and 'hdr' arg was always NULL.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 13:32:47 -07:00
Arseny Krasnov
b93f8877c1 virtio/vsock: set packet's type in virtio_transport_send_pkt_info()
There is no need to set type of packet which differs from type
of socket, so move passing type of packet from 'info' structure
to  'virtio_transport_send_pkt_info()' function. Since at current
time only stream type is supported, set it directly in 'virtio_
transport_send_pkt_info()', so callers don't need to set it.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 13:32:47 -07:00
Arseny Krasnov
8cb48554ad af_vsock: update comments for stream sockets
Replace 'stream' to 'connection oriented' in comments as
SEQPACKET is also connection oriented.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 13:32:46 -07:00
Arseny Krasnov
0798e78b10 af_vsock: rest of SEQPACKET support
Add socket ops for SEQPACKET type and .seqpacket_allow() callback
to query transports if they support SEQPACKET. Also split path
for data check for STREAM and SEQPACKET branches.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 13:32:46 -07:00
Arseny Krasnov
fbe70c4807 af_vsock: implement send logic for SEQPACKET
Update current stream enqueue function for SEQPACKET
support:
1) Call transport's seqpacket enqueue callback.
2) Return value from enqueue function is whole record length or error
   for SOCK_SEQPACKET.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 13:32:46 -07:00
Arseny Krasnov
9942c192b2 af_vsock: implement SEQPACKET receive loop
Add receive loop for SEQPACKET. It looks like receive loop for
STREAM, but there are differences:
1) It doesn't call notify callbacks.
2) It doesn't care about 'SO_SNDLOWAT' and 'SO_RCVLOWAT' values, because
   there is no sense for these values in SEQPACKET case.
3) It waits until whole record is received.
4) It processes and sets 'MSG_TRUNC' flag.

So to avoid extra conditions for two types of socket inside one loop, two
independent functions were created.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 13:32:46 -07:00
Arseny Krasnov
19c1b90e19 af_vsock: separate receive data loop
Some code in receive data loop could be shared between SEQPACKET
and STREAM sockets, while another part is type specific, so move STREAM
specific data receive logic to '__vsock_stream_recvmsg()' dedicated
function, while checks, that will be same for both STREAM and SEQPACKET
sockets, stays in 'vsock_connectible_recvmsg()'.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 13:32:46 -07:00
Arseny Krasnov
b3f7fd5488 af_vsock: separate wait data loop
Wait loop for data could be shared between SEQPACKET and STREAM
sockets, so move it to dedicated function. While moving the code
around, let's update an old comment.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 13:32:46 -07:00
Arseny Krasnov
a9e29e5511 af_vsock: update functions for connectible socket
Prepare af_vsock.c for SEQPACKET support: rename some functions such
as setsockopt(), getsockopt(), connect(), recvmsg(), sendmsg() in general
manner, because they are shared with stream sockets.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 13:32:46 -07:00
gushengxian
268551503d vsock/vmci: remove the repeated word "be"
Remove the repeated word "be".

Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10 13:43:12 -07:00
Andres Beltran
adae1e931a Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer
Pointers to ring-buffer packets sent by Hyper-V are used within the
guest VM. Hyper-V can send packets with erroneous values or modify
packet fields after they are processed by the guest. To defend
against these scenarios, return a copy of the incoming VMBus packet
after validating its length and offset fields in hv_pkt_iter_first().
In this way, the packet can no longer be modified by the host.

Signed-off-by: Andres Beltran <lkmlabelt@gmail.com>
Co-developed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210408161439.341988-1-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-05-14 17:37:46 +00:00
Yang Li
f0a5818b47 vsock/vmci: Remove redundant assignment to err
Variable 'err' is set to zero but this value is never read as it is
overwritten with a new value later on, hence it is a redundant
assignment and can be removed.

Clean up the following clang-analyzer warning:

net/vmw_vsock/vmci_transport.c:948:2: warning: Value stored to 'err' is
never read [clang-analyzer-deadcode.DeadStores]

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-30 15:00:59 -07:00
David S. Miller
6876a18d33 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2021-04-26 12:00:00 -07:00
Stefano Garzarella
8432b81149 vsock/virtio: free queued packets when closing socket
As reported by syzbot [1], there is a memory leak while closing the
socket. We partially solved this issue with commit ac03046ece
("vsock/virtio: free packets during the socket release"), but we
forgot to drain the RX queue when the socket is definitely closed by
the scheduled work.

To avoid future issues, let's use the new virtio_transport_remove_sock()
to drain the RX queue before removing the socket from the af_vsock lists
calling vsock_remove_sock().

[1] https://syzkaller.appspot.com/bug?extid=24452624fc4c571eedd9

Fixes: ac03046ece ("vsock/virtio: free packets during the socket release")
Reported-and-tested-by: syzbot+24452624fc4c571eedd9@syzkaller.appspotmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 17:07:21 -07:00
Stefano Garzarella
e16edc99d6 vsock/vmci: log once the failed queue pair allocation
VMCI feature is not supported in conjunction with the vSphere Fault
Tolerance (FT) feature.

VMware Tools can repeatedly try to create a vsock connection. If FT is
enabled the kernel logs is flooded with the following messages:

    qp_alloc_hypercall result = -20
    Could not attach to queue pair with -20

"qp_alloc_hypercall result = -20" was hidden by commit e8266c4c33
("VMCI: Stop log spew when qp allocation isn't possible"), but "Could
not attach to queue pair with -20" is still there flooding the log.

Since the error message can be useful in some cases, print it only once.

Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19 14:30:23 -07:00
Lu Wei
9195f06b2d net: vsock: Fix a typo
Modify "occured" to "occurred" in net/vmw_vsock/af_vsock.c.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-28 17:52:51 -07:00
David Brazdil
1f935e8e72 selinux: vsock: Set SID for socket returned by accept()
For AF_VSOCK, accept() currently returns sockets that are unlabelled.
Other socket families derive the child's SID from the SID of the parent
and the SID of the incoming packet. This is typically done as the
connected socket is placed in the queue that accept() removes from.

Reuse the existing 'security_sk_clone' hook to copy the SID from the
parent (server) socket to the child. There is no packet SID in this
case.

Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-19 13:46:55 -07:00
Stefano Garzarella
1c5fae9c9a vsock: fix locking in vsock_shutdown()
In vsock_shutdown() we touched some socket fields without holding the
socket lock, such as 'state' and 'sk_flags'.

Also, after the introduction of multi-transport, we are accessing
'vsk->transport' in vsock_send_shutdown() without holding the lock
and this call can be made while the connection is in progress, so
the transport can change in the meantime.

To avoid issues, we hold the socket lock when we enter in
vsock_shutdown() and release it when we leave.

Among the transports that implement the 'shutdown' callback, only
hyperv_transport acquired the lock. Since the caller now holds it,
we no longer take it.

Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09 15:31:22 -08:00
Stefano Garzarella
ce7536bc73 vsock/virtio: update credit only if socket is not closed
If the socket is closed or is being released, some resources used by
virtio_transport_space_update() such as 'vsk->trans' may be released.

To avoid a use after free bug we should only update the available credit
when we are sure the socket is still open and we have the lock held.

Fixes: 06a8fc7836 ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20210208144454.84438-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-08 13:27:46 -08:00
Norbert Slusarek
3d0bc44d39 net/vmw_vsock: improve locking in vsock_connect_timeout()
A possible locking issue in vsock_connect_timeout() was recognized by
Eric Dumazet which might cause a null pointer dereference in
vsock_transport_cancel_pkt(). This patch assures that
vsock_transport_cancel_pkt() will be called within the lock, so a race
condition won't occur which could result in vsk->transport to be set to NULL.

Fixes: 380feae0de ("vsock: cancel packets when failing to connect")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Norbert Slusarek <nslusarek@gmx.net>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/trinity-f8e0937a-cf0e-4d80-a76e-d9a958ba3ef1-1612535522360@3c-app-gmx-bap12
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 15:03:31 -08:00
Norbert Slusarek
5d1cbcc990 net/vmw_vsock: fix NULL pointer dereference
In vsock_stream_connect(), a thread will enter schedule_timeout().
While being scheduled out, another thread can enter vsock_stream_connect()
as well and set vsk->transport to NULL. In case a signal was sent, the
first thread can leave schedule_timeout() and vsock_transport_cancel_pkt()
will be called right after. Inside vsock_transport_cancel_pkt(), a null
dereference will happen on transport->cancel_pkt.

Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Signed-off-by: Norbert Slusarek <nslusarek@gmx.net>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/trinity-c2d6cede-bfb1-44e2-85af-1fbc7f541715-1612535117028@3c-app-gmx-bap12
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 15:03:17 -08:00
Alexander Popov
c518adafa3 vsock: fix the race conditions in multi-transport support
There are multiple similar bugs implicitly introduced by the
commit c0cfa2d8a7 ("vsock: add multi-transports support") and
commit 6a2c096210 ("vsock: prevent transport modules unloading").

The bug pattern:
 [1] vsock_sock.transport pointer is copied to a local variable,
 [2] lock_sock() is called,
 [3] the local variable is used.
VSOCK multi-transport support introduced the race condition:
vsock_sock.transport value may change between [1] and [2].

Let's copy vsock_sock.transport pointer to local variables after
the lock_sock() call.

Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/20210201084719.2257066-1-alex.popov@linux.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 19:54:30 -08:00
Andra Paraschiv
7f816984f4 af_vsock: Assign the vsock transport considering the vsock address flags
The vsock flags field can be set in the connect path (user space app)
and the (listen) receive path (kernel space logic).

When the vsock transport is assigned, the remote CID is used to
distinguish between types of connection.

Use the vsock flags value (in addition to the CID) from the remote
address to decide which vsock transport to assign. For the sibling VMs
use case, all the vsock packets need to be forwarded to the host, so
always assign the guest->host transport if the VMADDR_FLAG_TO_HOST flag
is set. For the other use cases, the vsock transport assignment logic is
not changed.

Changelog

v3 -> v4

* Update the "remote_flags" local variable type to reflect the change of
  the "svm_flags" field to be 1 byte in size.

v2 -> v3

* Update bitwise check logic to not compare result to the flag value.

v1 -> v2

* Use bitwise operator to check the vsock flag.
* Use the updated "VMADDR_FLAG_TO_HOST" flag naming.
* Merge the checks for the g2h transport assignment in one "if" block.

Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14 19:33:39 -08:00
Andra Paraschiv
1b5f2ab98e af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
The vsock flags can be set during the connect() setup logic, when
initializing the vsock address data structure variable. Then the vsock
transport is assigned, also considering this flags field.

The vsock transport is also assigned on the (listen) receive path. The
flags field needs to be set considering the use case.

Set the value of the vsock flags of the remote address to the one
targeted for packets forwarding to the host, if the following conditions
are met:

* The source CID of the packet is higher than VMADDR_CID_HOST.
* The destination CID of the packet is higher than VMADDR_CID_HOST.

Changelog

v3 -> v4

* No changes.

v2 -> v3

* No changes.

v1 -> v2

* Set the vsock flag on the receive path in the vsock transport
  assignment logic.
* Use bitwise operator for the vsock flag setup.
* Use the updated "VMADDR_FLAG_TO_HOST" flag naming.

Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14 19:33:39 -08:00
Andra Paraschiv
cada7ccd9d vsock_addr: Check for supported flag values
Check if the provided flags value from the vsock address data structure
includes the supported flags in the corresponding kernel version.

The first byte of the "svm_zero" field is used as "svm_flags", so add
the flags check instead.

Changelog

v3 -> v4

* New patch in v4.

Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14 19:33:39 -08:00
Jakub Kicinski
5c39f26e67 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Trivial conflict in CAN, keep the net-next + the byteswap wrapper.

Conflicts:
	drivers/net/can/usb/gs_usb.c

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27 18:25:27 -08:00
Stefano Garzarella
3fe356d58e vsock/virtio: discard packets only when socket is really closed
Starting from commit 8692cefc43 ("virtio_vsock: Fix race condition
in virtio_transport_recv_pkt"), we discard packets in
virtio_transport_recv_pkt() if the socket has been released.

When the socket is connected, we schedule a delayed work to wait the
RST packet from the other peer, also if SHUTDOWN_MASK is set in
sk->sk_shutdown.
This is done to complete the virtio-vsock shutdown algorithm, releasing
the port assigned to the socket definitively only when the other peer
has consumed all the packets.

If we discard the RST packet received, the socket will be closed only
when the VSOCK_CLOSE_TIMEOUT is reached.

Sergio discovered the issue while running ab(1) HTTP benchmark using
libkrun [1] and observing a latency increase with that commit.

To avoid this issue, we discard packet only if the socket is really
closed (SOCK_DONE flag is set).
We also set SOCK_DONE in virtio_transport_release() when we don't need
to wait any packets from the other peer (we didn't schedule the delayed
work). In this case we remove the socket from the vsock lists, releasing
the port assigned.

[1] https://github.com/containers/libkrun

Fixes: 8692cefc43 ("virtio_vsock: Fix race condition in virtio_transport_recv_pkt")
Cc: justin.he@arm.com
Reported-by: Sergio Lopez <slp@redhat.com>
Tested-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jia He <justin.he@arm.com>
Link: https://lore.kernel.org/r/20201120104736.73749-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23 16:36:29 -08:00
Jakub Kicinski
56495a2442 Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-19 19:08:46 -08:00
Stefano Garzarella
65b422d9b6 vsock: forward all packets to the host when no H2G is registered
Before commit c0cfa2d8a7 ("vsock: add multi-transports support"),
if a G2H transport was loaded (e.g. virtio transport), every packets
was forwarded to the host, regardless of the destination CID.
The H2G transports implemented until then (vhost-vsock, VMCI) always
responded with an error, if the destination CID was not
VMADDR_CID_HOST.

From that commit, we are using the remote CID to decide which
transport to use, so packets with remote CID > VMADDR_CID_HOST(2)
are sent only through H2G transport. If no H2G is available, packets
are discarded directly in the guest.

Some use cases (e.g. Nitro Enclaves [1]) rely on the old behaviour
to implement sibling VMs communication, so we restore the old
behavior when no H2G is registered.
It will be up to the host to discard packets if the destination is
not the right one. As it was already implemented before adding
multi-transport support.

Tested with nested QEMU/KVM by me and Nitro Enclaves by Andra.

[1] Documentation/virt/ne_overview.rst

Cc: Jorgen Hansen <jhansen@vmware.com>
Cc: Dexuan Cui <decui@microsoft.com>
Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Reported-by: Andra Paraschiv <andraprs@amazon.com>
Tested-by: Andra Paraschiv <andraprs@amazon.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201112133837.34183-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14 11:33:39 -08:00
Colin Ian King
c3e448cdc0 vsock: fix the error return when an invalid ioctl command is used
Currently when an invalid ioctl command is used the error return
is -EINVAL.  Fix this by returning the correct error -ENOIOCTLCMD.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-29 17:43:20 -07:00
Colin Ian King
6bc8f20c1d vsock: remove ratelimit unknown ioctl message
When exercising the kernel with stress-ng with some ioctl tests the
"Unknown ioctl" error message is spamming the kernel log at a high
rate. Remove this message.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-29 17:43:20 -07:00
Jeff Vander Stoep
af545bb5ee vsock: use ns_capable_noaudit() on socket create
During __vsock_create() CAP_NET_ADMIN is used to determine if the
vsock_sock->trusted should be set to true. This value is used later
for determing if a remote connection should be allowed to connect
to a restricted VM. Unfortunately, if the caller doesn't have
CAP_NET_ADMIN, an audit message such as an selinux denial is
generated even if the caller does not want a trusted socket.

Logging errors on success is confusing. To avoid this, switch the
capable(CAP_NET_ADMIN) check to the noaudit version.

Reported-by: Roman Kiryanov <rkir@google.com>
https://android-review.googlesource.com/c/device/generic/goldfish/+/1468545/
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Link: https://lore.kernel.org/r/20201023143757.377574-1-jeffv@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26 16:22:42 -07:00
Stefano Garzarella
1980c05844 vsock: fix potential null pointer dereference in vsock_poll()
syzbot reported this issue where in the vsock_poll() we find the
socket state at TCP_ESTABLISHED, but 'transport' is null:
  general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] PREEMPT SMP KASAN
  KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097]
  CPU: 0 PID: 8227 Comm: syz-executor.2 Not tainted 5.8.0-rc7-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  RIP: 0010:vsock_poll+0x75a/0x8e0 net/vmw_vsock/af_vsock.c:1038
  Call Trace:
   sock_poll+0x159/0x460 net/socket.c:1266
   vfs_poll include/linux/poll.h:90 [inline]
   do_pollfd fs/select.c:869 [inline]
   do_poll fs/select.c:917 [inline]
   do_sys_poll+0x607/0xd40 fs/select.c:1011
   __do_sys_poll fs/select.c:1069 [inline]
   __se_sys_poll fs/select.c:1057 [inline]
   __x64_sys_poll+0x18c/0x440 fs/select.c:1057
   do_syscall_64+0x60/0xe0 arch/x86/entry/common.c:384
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

This issue can happen if the TCP_ESTABLISHED state is set after we read
the vsk->transport in the vsock_poll().

We could put barriers to synchronize, but this can only happen during
connection setup, so we can simply check that 'transport' is valid.

Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Reported-and-tested-by: syzbot+a61bac2fcc1a7c6623fe@syzkaller.appspotmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-12 12:56:06 -07:00
David S. Miller
a57066b1a0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
The UDP reuseport conflict was a little bit tricky.

The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.

At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.

This requires moving the reuseport_has_conns() logic into the callers.

While we are here, get rid of inline directives as they do not belong
in foo.c files.

The other changes were cases of more straightforward overlapping
modifications.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-25 17:49:04 -07:00
Christoph Hellwig
a7b75c5a8c net: pass a sockptr_t into ->setsockopt
Rework the remaining setsockopt code to pass a sockptr_t instead of a
plain user pointer.  This removes the last remaining set_fs(KERNEL_DS)
outside of architecture specific code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154]
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24 15:41:54 -07:00
Christoph Hellwig
a44d9e7210 net: make ->{get,set}sockopt in proto_ops optional
Just check for a NULL method instead of wiring up
sock_no_{get,set}sockopt.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19 18:16:41 -07:00
Stefano Garzarella
f961134a61 vsock/virtio: annotate 'the_virtio_vsock' RCU pointer
Commit 0deab087b1 ("vsock/virtio: use RCU to avoid use-after-free
on the_virtio_vsock") starts to use RCU to protect 'the_virtio_vsock'
pointer, but we forgot to annotate it.

This patch adds the annotation to fix the following sparse errors:

    net/vmw_vsock/virtio_transport.c:73:17: error: incompatible types in comparison expression (different address spaces):
    net/vmw_vsock/virtio_transport.c:73:17:    struct virtio_vsock [noderef] __rcu *
    net/vmw_vsock/virtio_transport.c:73:17:    struct virtio_vsock *
    net/vmw_vsock/virtio_transport.c:171:17: error: incompatible types in comparison expression (different address spaces):
    net/vmw_vsock/virtio_transport.c:171:17:    struct virtio_vsock [noderef] __rcu *
    net/vmw_vsock/virtio_transport.c:171:17:    struct virtio_vsock *
    net/vmw_vsock/virtio_transport.c:207:17: error: incompatible types in comparison expression (different address spaces):
    net/vmw_vsock/virtio_transport.c:207:17:    struct virtio_vsock [noderef] __rcu *
    net/vmw_vsock/virtio_transport.c:207:17:    struct virtio_vsock *
    net/vmw_vsock/virtio_transport.c:561:13: error: incompatible types in comparison expression (different address spaces):
    net/vmw_vsock/virtio_transport.c:561:13:    struct virtio_vsock [noderef] __rcu *
    net/vmw_vsock/virtio_transport.c:561:13:    struct virtio_vsock *
    net/vmw_vsock/virtio_transport.c:612:9: error: incompatible types in comparison expression (different address spaces):
    net/vmw_vsock/virtio_transport.c:612:9:    struct virtio_vsock [noderef] __rcu *
    net/vmw_vsock/virtio_transport.c:612:9:    struct virtio_vsock *
    net/vmw_vsock/virtio_transport.c:631:9: error: incompatible types in comparison expression (different address spaces):
    net/vmw_vsock/virtio_transport.c:631:9:    struct virtio_vsock [noderef] __rcu *
    net/vmw_vsock/virtio_transport.c:631:9:    struct virtio_vsock *

Fixes: 0deab087b1 ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock")
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15 17:47:15 -07:00
Stefano Garzarella
fdb4276aae vsock/vmci: make vmci_vsock_transport_cb() static
Fix the following gcc-9.3 warning when building with 'make W=1':
    net/vmw_vsock/vmci_transport.c:2058:6: warning: no previous prototype
        for ‘vmci_vsock_transport_cb’ [-Wmissing-prototypes]
     2058 | void vmci_vsock_transport_cb(bool is_host)
          |      ^~~~~~~~~~~~~~~~~~~~~~~

Fixes: b1bba80a43 ("vsock/vmci: register vmci_transport only when VMCI guest/host are active")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-05 13:18:26 -07:00
Jia He
8692cefc43 virtio_vsock: Fix race condition in virtio_transport_recv_pkt
When client on the host tries to connect(SOCK_STREAM, O_NONBLOCK) to the
server on the guest, there will be a panic on a ThunderX2 (armv8a server):

[  463.718844] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[  463.718848] Mem abort info:
[  463.718849]   ESR = 0x96000044
[  463.718852]   EC = 0x25: DABT (current EL), IL = 32 bits
[  463.718853]   SET = 0, FnV = 0
[  463.718854]   EA = 0, S1PTW = 0
[  463.718855] Data abort info:
[  463.718856]   ISV = 0, ISS = 0x00000044
[  463.718857]   CM = 0, WnR = 1
[  463.718859] user pgtable: 4k pages, 48-bit VAs, pgdp=0000008f6f6e9000
[  463.718861] [0000000000000000] pgd=0000000000000000
[  463.718866] Internal error: Oops: 96000044 [#1] SMP
[...]
[  463.718977] CPU: 213 PID: 5040 Comm: vhost-5032 Tainted: G           O      5.7.0-rc7+ #139
[  463.718980] Hardware name: GIGABYTE R281-T91-00/MT91-FS1-00, BIOS F06 09/25/2018
[  463.718982] pstate: 60400009 (nZCv daif +PAN -UAO)
[  463.718995] pc : virtio_transport_recv_pkt+0x4c8/0xd40 [vmw_vsock_virtio_transport_common]
[  463.718999] lr : virtio_transport_recv_pkt+0x1fc/0xd40 [vmw_vsock_virtio_transport_common]
[  463.719000] sp : ffff80002dbe3c40
[...]
[  463.719025] Call trace:
[  463.719030]  virtio_transport_recv_pkt+0x4c8/0xd40 [vmw_vsock_virtio_transport_common]
[  463.719034]  vhost_vsock_handle_tx_kick+0x360/0x408 [vhost_vsock]
[  463.719041]  vhost_worker+0x100/0x1a0 [vhost]
[  463.719048]  kthread+0x128/0x130
[  463.719052]  ret_from_fork+0x10/0x18

The race condition is as follows:
Task1                                Task2
=====                                =====
__sock_release                       virtio_transport_recv_pkt
  __vsock_release                      vsock_find_bound_socket (found sk)
    lock_sock_nested
    vsock_remove_sock
    sock_orphan
      sk_set_socket(sk, NULL)
    sk->sk_shutdown = SHUTDOWN_MASK
    ...
    release_sock
                                    lock_sock
                                       virtio_transport_recv_connecting
                                         sk->sk_socket->state (panic!)

The root cause is that vsock_find_bound_socket can't hold the lock_sock,
so there is a small race window between vsock_find_bound_socket() and
lock_sock(). If __vsock_release() is running in another task,
sk->sk_socket will be set to NULL inadvertently.

This fixes it by checking sk->sk_shutdown(suggested by Stefano) after
lock_sock since sk->sk_shutdown is set to SHUTDOWN_MASK under the
protection of lock_sock_nested.

Signed-off-by: Jia He <justin.he@arm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30 17:44:01 -07:00
Stefano Garzarella
7e0afbdfd1 vsock: fix timeout in vsock_accept()
The accept(2) is an "input" socket interface, so we should use
SO_RCVTIMEO instead of SO_SNDTIMEO to set the timeout.

So this patch replace sock_sndtimeo() with sock_rcvtimeo() to
use the right timeout in the vsock_accept().

Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27 11:20:23 -07:00
Stefano Garzarella
a78d163978 vsock/virtio: fix multiple packet delivery to monitoring devices
In virtio_transport.c, if the virtqueue is full, the transmitting
packet is queued up and it will be sent in the next iteration.
This causes the same packet to be delivered multiple times to
monitoring devices.

We want to continue to deliver packets to monitoring devices before
it is put in the virtqueue, to avoid that replies can appear in the
packet capture before the transmitted packet.

This patch fixes the issue, adding a new flag (tap_delivered) in
struct virtio_vsock_pkt, to check if the packet is already delivered
to monitoring devices.

In vhost/vsock.c, we are splitting packets, so we must set
'tap_delivered' to false when we queue up the same virtio_vsock_pkt
to handle the remaining bytes.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-27 10:18:01 -07:00
David S. Miller
9f6e055907 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
The mptcp conflict was overlapping additions.

The SMC conflict was an additional and removal happening at the same
time.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27 18:31:39 -08:00
Stefano Garzarella
3f74957fcb vsock: fix potential deadlock in transport->release()
Some transports (hyperv, virtio) acquire the sock lock during the
.release() callback.

In the vsock_stream_connect() we call vsock_assign_transport(); if
the socket was previously assigned to another transport, the
vsk->transport->release() is called, but the sock lock is already
held in the vsock_stream_connect(), causing a deadlock reported by
syzbot:

    INFO: task syz-executor280:9768 blocked for more than 143 seconds.
      Not tainted 5.6.0-rc1-syzkaller #0
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    syz-executor280 D27912  9768   9766 0x00000000
    Call Trace:
     context_switch kernel/sched/core.c:3386 [inline]
     __schedule+0x934/0x1f90 kernel/sched/core.c:4082
     schedule+0xdc/0x2b0 kernel/sched/core.c:4156
     __lock_sock+0x165/0x290 net/core/sock.c:2413
     lock_sock_nested+0xfe/0x120 net/core/sock.c:2938
     virtio_transport_release+0xc4/0xd60 net/vmw_vsock/virtio_transport_common.c:832
     vsock_assign_transport+0xf3/0x3b0 net/vmw_vsock/af_vsock.c:454
     vsock_stream_connect+0x2b3/0xc70 net/vmw_vsock/af_vsock.c:1288
     __sys_connect_file+0x161/0x1c0 net/socket.c:1857
     __sys_connect+0x174/0x1b0 net/socket.c:1874
     __do_sys_connect net/socket.c:1885 [inline]
     __se_sys_connect net/socket.c:1882 [inline]
     __x64_sys_connect+0x73/0xb0 net/socket.c:1882
     do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
     entry_SYSCALL_64_after_hwframe+0x49/0xbe

To avoid this issue, this patch remove the lock acquiring in the
.release() callback of hyperv and virtio transports, and it holds
the lock when we call vsk->transport->release() in the vsock core.

Reported-by: syzbot+731710996d79d0d58fbc@syzkaller.appspotmail.com
Fixes: 408624af4c ("vsock: use local transport when it is loaded")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27 12:03:56 -08:00
Sebastien Boeuf
df12eb6d6c net: virtio_vsock: Enhance connection semantics
Whenever the vsock backend on the host sends a packet through the RX
queue, it expects an answer on the TX queue. Unfortunately, there is one
case where the host side will hang waiting for the answer and might
effectively never recover if no timeout mechanism was implemented.

This issue happens when the guest side starts binding to the socket,
which insert a new bound socket into the list of already bound sockets.
At this time, we expect the guest to also start listening, which will
trigger the sk_state to move from TCP_CLOSE to TCP_LISTEN. The problem
occurs if the host side queued a RX packet and triggered an interrupt
right between the end of the binding process and the beginning of the
listening process. In this specific case, the function processing the
packet virtio_transport_recv_pkt() will find a bound socket, which means
it will hit the switch statement checking for the sk_state, but the
state won't be changed into TCP_LISTEN yet, which leads the code to pick
the default statement. This default statement will only free the buffer,
while it should also respond to the host side, by sending a packet on
its TX queue.

In order to simply fix this unfortunate chain of events, it is important
that in case the default statement is entered, and because at this stage
we know the host side is waiting for an answer, we must send back a
packet containing the operation VIRTIO_VSOCK_OP_RST.

One could say that a proper timeout mechanism on the host side will be
enough to avoid the backend to hang. But the point of this patch is to
ensure the normal use case will be provided with proper responsiveness
when it comes to establishing the connection.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16 19:01:49 -08:00
David S. Miller
b3f7e3f23a Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net 2020-01-19 22:10:04 +01:00
Sunil Muthuswamy
c742c59e1f hv_sock: Remove the accept port restriction
Currently, hv_sock restricts the port the guest socket can accept
connections on. hv_sock divides the socket port namespace into two parts
for server side (listening socket), 0-0x7FFFFFFF & 0x80000000-0xFFFFFFFF
(there are no restrictions on client port namespace). The first part
(0-0x7FFFFFFF) is reserved for sockets where connections can be accepted.
The second part (0x80000000-0xFFFFFFFF) is reserved for allocating ports
for the peer (host) socket, once a connection is accepted.
This reservation of the port namespace is specific to hv_sock and not
known by the generic vsock library (ex: af_vsock). This is problematic
because auto-binds/ephemeral ports are handled by the generic vsock
library and it has no knowledge of this port reservation and could
allocate a port that is not compatible with hv_sock (and legitimately so).
The issue hasn't surfaced so far because the auto-bind code of vsock
(__vsock_bind_stream) prior to the change 'VSOCK: bind to random port for
VMADDR_PORT_ANY' would start walking up from LAST_RESERVED_PORT (1023) and
start assigning ports. That will take a large number of iterations to hit
0x7FFFFFFF. But, after the above change to randomize port selection, the
issue has started coming up more frequently.
There has really been no good reason to have this port reservation logic
in hv_sock from the get go. Reserving a local port for peer ports is not
how things are handled generally. Peer ports should reflect the peer port.
This fixes the issue by lifting the port reservation, and also returns the
right peer port. Since the code converts the GUID to the peer port (by
using the first 4 bytes), there is a possibility of conflicts, but that
seems like a reasonable risk to take, given this is limited to vsock and
that only applies to all local sockets.

Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 11:50:53 -08:00
David S. Miller
ac80010fc9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Mere overlapping changes in the conflicts here.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22 15:15:05 -08:00
Stefano Garzarella
4aaf596148 vsock/virtio: add WARN_ON check on virtio_transport_get_ops()
virtio_transport_get_ops() and virtio_transport_send_pkt_info()
can only be used on connecting/connected sockets, since a socket
assigned to a transport is required.

This patch adds a WARN_ON() on virtio_transport_get_ops() to check
this requirement, a comment and a returned error on
virtio_transport_send_pkt_info(),

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-16 16:07:12 -08:00
Stefano Garzarella
df18fa1462 vsock/virtio: fix null-pointer dereference in virtio_transport_recv_listen()
With multi-transport support, listener sockets are not bound to any
transport. So, calling virtio_transport_reset(), when an error
occurs, on a listener socket produces the following null-pointer
dereference:

  BUG: kernel NULL pointer dereference, address: 00000000000000e8
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP PTI
  CPU: 0 PID: 20 Comm: kworker/0:1 Not tainted 5.5.0-rc1-ste-00003-gb4be21f316ac-dirty #56
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
  Workqueue: virtio_vsock virtio_transport_rx_work [vmw_vsock_virtio_transport]
  RIP: 0010:virtio_transport_send_pkt_info+0x20/0x130 [vmw_vsock_virtio_transport_common]
  Code: 1f 84 00 00 00 00 00 0f 1f 00 55 48 89 e5 41 57 41 56 41 55 49 89 f5 41 54 49 89 fc 53 48 83 ec 10 44 8b 76 20 e8 c0 ba fe ff <48> 8b 80 e8 00 00 00 e8 64 e3 7d c1 45 8b 45 00 41 8b 8c 24 d4 02
  RSP: 0018:ffffc900000b7d08 EFLAGS: 00010282
  RAX: 0000000000000000 RBX: ffff88807bf12728 RCX: 0000000000000000
  RDX: ffff88807bf12700 RSI: ffffc900000b7d50 RDI: ffff888035c84000
  RBP: ffffc900000b7d40 R08: ffff888035c84000 R09: ffffc900000b7d08
  R10: ffff8880781de800 R11: 0000000000000018 R12: ffff888035c84000
  R13: ffffc900000b7d50 R14: 0000000000000000 R15: ffff88807bf12724
  FS:  0000000000000000(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000000000e8 CR3: 00000000790f4004 CR4: 0000000000160ef0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   virtio_transport_reset+0x59/0x70 [vmw_vsock_virtio_transport_common]
   virtio_transport_recv_pkt+0x5bb/0xe50 [vmw_vsock_virtio_transport_common]
   ? detach_buf_split+0xf1/0x130
   virtio_transport_rx_work+0xba/0x130 [vmw_vsock_virtio_transport]
   process_one_work+0x1c0/0x300
   worker_thread+0x45/0x3c0
   kthread+0xfc/0x130
   ? current_work+0x40/0x40
   ? kthread_park+0x90/0x90
   ret_from_fork+0x35/0x40
  Modules linked in: sunrpc kvm_intel kvm vmw_vsock_virtio_transport vmw_vsock_virtio_transport_common irqbypass vsock virtio_rng rng_core
  CR2: 00000000000000e8
  ---[ end trace e75400e2ea2fa824 ]---

This happens because virtio_transport_reset() calls
virtio_transport_send_pkt_info() that can be used only on
connecting/connected sockets.

This patch fixes the issue, using virtio_transport_reset_no_sock()
instead of virtio_transport_reset() when we are handling a listener
socket.

Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-16 16:07:12 -08:00
Stefano Garzarella
bf5432b1de vsock/virtio: remove loopback handling
We can remove the loopback handling from virtio_transport,
because now the vsock core is able to handle local communication
using the new vsock_loopback device.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11 15:01:23 -08:00
Stefano Garzarella
408624af4c vsock: use local transport when it is loaded
Now that we have a transport that can handle the local communication,
we can use it when it is loaded.

A socket will use the local transport (loopback) when the remote
CID is:
- equal to VMADDR_CID_LOCAL
- or equal to transport_g2h->get_local_cid(), if transport_g2h
  is loaded (this allows us to keep the same behavior implemented
  by virtio and vmci transports)
- or equal to VMADDR_CID_HOST, if transport_g2h is not loaded

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11 15:01:23 -08:00
Stefano Garzarella
077263fba1 vsock: add vsock_loopback transport
This patch adds a new vsock_loopback transport to handle local
communication.
This transport is based on the loopback implementation of
virtio_transport, so it uses the virtio_transport_common APIs
to interface with the vsock core.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11 15:01:23 -08:00
Stefano Garzarella
0e12190578 vsock: add local transport support in the vsock core
This patch allows to register a transport able to handle
local communication (loopback).

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11 15:01:23 -08:00
Stefano Garzarella
ef343b35d4 vsock: add VMADDR_CID_LOCAL definition
The VMADDR_CID_RESERVED (1) was used by VMCI, but now it is not
used anymore, so we can reuse it for local communication
(loopback) adding the new well-know CID: VMADDR_CID_LOCAL.

Cc: Jorgen Hansen <jhansen@vmware.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11 15:01:23 -08:00
Stefano Garzarella
c5144fcbf2 vsock/virtio_transport_common: remove unused virtio header includes
We can remove virtio header includes, because virtio_transport_common
doesn't use virtio API, but provides common functions to interface
virtio/vhost transports with the af_vsock core, and to handle
the protocol.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11 15:01:23 -08:00
Linus Torvalds
0dd0c8f7db - Support for new VMBus protocols (Andrea Parri).
- Hibernation support (Dexuan Cui).
 - Latency testing framework (Branden Bonaby).
 - Decoupling Hyper-V page size from guest page size (Himadri Pandya).
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE4n5dijQDou9mhzu83qZv95d3LNwFAl3f5YIACgkQ3qZv95d3
 LNzBww/8Cpv/BnOs2cp56OhC+2++3YlWfmxGnvQb9h52weElgr1AZF33lAynp8BZ
 YssOcDnS/G2iAkNDffbQA7s3WTwIjP1weJibOeKbtcXp4SuhNR3gnJafufNddNDv
 bw8ZReLQV7hy3sHb3OUx0aJk5Mssp0N9ZpxRilyIpLELPfVp63gFebq6s1MQYljk
 BAiNO4SKqsGQGZApt2F4Cc3hX2wU2ZfiDm6SifXiLYITGnvilIn7XFIht+2jJBWS
 CdzRoGXcwhQhlj68XWlc89SOzJb7vVUMO1sr84psfbQ2LbhJU8lfJKRJ4b4lR07Z
 Uv5FYxjr14S65fv7DkzCfWU+uPN/sObG4pPXihlfqcTraOvYLQ6/x8cw+9tGZg4H
 aTtnF40hnO81aKsvPAeIsSzVkoyPaSrt7KKhk+Bw/5EUDTTNp6EbIuL4xwnKt6Rt
 2UpA5HM9guQqNb6OZrjlpZfJgd9bNP4CZLBTfOukmnZpONKr2Wv3wubcwQJ8ibQc
 1WZ5SfN2Wmg999Ski7j9qzHk0tWJxa6SX+2NLEHRKxy2nJSJ1zlAr//bznMyMgH/
 yKPDaSkOFoy0aqiTKV2WzuOY6FGXTrSo5vq8YAgYRgp3xB+5+7zLeqlj3ipXhLYE
 HH/eqB27eSnvi0jpub4TbszGJG0o4Z1aYx3aHYYqrOfWX/A5Vls=
 =oJGE
 -----END PGP SIGNATURE-----

Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull Hyper-V updates from Sasha Levin:

 - support for new VMBus protocols (Andrea Parri)

 - hibernation support (Dexuan Cui)

 - latency testing framework (Branden Bonaby)

 - decoupling Hyper-V page size from guest page size (Himadri Pandya)

* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits)
  Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic
  drivers/hv: Replace binary semaphore with mutex
  drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86
  HID: hyperv: Add the support of hibernation
  hv_balloon: Add the support of hibernation
  x86/hyperv: Implement hv_is_hibernation_supported()
  Drivers: hv: balloon: Remove dependencies on guest page size
  Drivers: hv: vmbus: Remove dependencies on guest page size
  x86: hv: Add function to allocate zeroed page for Hyper-V
  Drivers: hv: util: Specify ring buffer size using Hyper-V page size
  Drivers: hv: Specify receive buffer size using Hyper-V page size
  tools: hv: add vmbus testing tool
  drivers: hv: vmbus: Introduce latency testing
  video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver
  video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host
  hv_netvsc: Add the support of hibernation
  hv_sock: Add the support of hibernation
  video: hyperv_fb: Add the support of hibernation
  scsi: storvsc: Add the support of hibernation
  Drivers: hv: vmbus: Add module parameter to cap the VMBus version
  ...
2019-11-30 14:50:51 -08:00
Dexuan Cui
2194c2eb67 hv_sock: Add the support of hibernation
Add the necessary dummy callbacks for hibernation.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-21 20:10:44 -05:00
Stefano Garzarella
039fcccaed vsock: avoid to assign transport if its initialization fails
If transport->init() fails, we can't assign the transport to the
socket, because it's not initialized correctly, and any future
calls to the transport callbacks would have an unexpected behavior.

Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Reported-and-tested-by: syzbot+e2e5c07bf353b2f79daa@syzkaller.appspotmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21 11:37:16 -08:00
Stefano Garzarella
36c5b48b91 vsock: fix bind() behaviour taking care of CID
When we are looking for a socket bound to a specific address,
we also have to take into account the CID.

This patch is useful with multi-transports support because it
allows the binding of the same port with different CID, and
it prevents a connection to a wrong socket bound to the same
port, but with different CID.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 18:12:18 -08:00
Stefano Garzarella
6a2c096210 vsock: prevent transport modules unloading
This patch adds 'module' member in the 'struct vsock_transport'
in order to get/put the transport module. This prevents the
module unloading while sockets are assigned to it.

We increase the module refcnt when a socket is assigned to a
transport, and we decrease the module refcnt when the socket
is destructed.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 18:12:18 -08:00
Stefano Garzarella
b1bba80a43 vsock/vmci: register vmci_transport only when VMCI guest/host are active
To allow other transports to be loaded with vmci_transport,
we register the vmci_transport as G2H or H2G only when a VMCI guest
or host is active.

To do that, this patch adds a callback registered in the vmci driver
that will be called when the host or guest becomes active.
This callback will register the vmci_transport in the VSOCK core.

Cc: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 18:12:18 -08:00
Stefano Garzarella
c0cfa2d8a7 vsock: add multi-transports support
This patch adds the support of multiple transports in the
VSOCK core.

With the multi-transports support, we can use vsock with nested VMs
(using also different hypervisors) loading both guest->host and
host->guest transports at the same time.

Major changes:
- vsock core module can be loaded regardless of the transports
- vsock_core_init() and vsock_core_exit() are renamed to
  vsock_core_register() and vsock_core_unregister()
- vsock_core_register() has a feature parameter (H2G, G2H, DGRAM)
  to identify which directions the transport can handle and if it's
  support DGRAM (only vmci)
- each stream socket is assigned to a transport when the remote CID
  is set (during the connect() or when we receive a connection request
  on a listener socket).
  The remote CID is used to decide which transport to use:
  - remote CID <= VMADDR_CID_HOST will use guest->host transport;
  - remote CID == local_cid (guest->host transport) will use guest->host
    transport for loopback (host->guest transports don't support loopback);
  - remote CID > VMADDR_CID_HOST will use host->guest transport;
- listener sockets are not bound to any transports since no transport
  operations are done on it. In this way we can create a listener
  socket, also if the transports are not loaded or with VMADDR_CID_ANY
  to listen on all transports.
- DGRAM sockets are handled as before, since only the vmci_transport
  provides this feature.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 18:12:18 -08:00
Stefano Garzarella
039642574c hv_sock: set VMADDR_CID_HOST in the hvs_remote_addr_init()
Remote peer is always the host, so we set VMADDR_CID_HOST as
remote CID instead of VMADDR_CID_ANY.

Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 18:12:18 -08:00
Stefano Garzarella
55f3e149b6 vsock: move vsock_insert_unbound() in the vsock_create()
vsock_insert_unbound() was called only when 'sock' parameter of
__vsock_create() was not null. This only happened when
__vsock_create() was called by vsock_create().

In order to simplify the multi-transports support, this patch
moves vsock_insert_unbound() at the end of vsock_create().

Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 18:12:18 -08:00
Stefano Garzarella
b9ca2f5ff7 vsock: add vsock_create_connected() called by transports
All transports call __vsock_create() with the same parameters,
most of them depending on the parent socket. In order to simplify
the VSOCK core APIs exposed to the transports, this patch adds
the vsock_create_connected() callable from transports to create
a new socket when a connection request is received.
We also unexported the __vsock_create().

Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 18:12:18 -08:00
Stefano Garzarella
b9f2b0ffde vsock: handle buffer_size sockopts in the core
virtio_transport and vmci_transport handle the buffer_size
sockopts in a very similar way.

In order to support multiple transports, this patch moves this
handling in the core to allow the user to change the options
also if the socket is not yet assigned to any transport.

This patch also adds the '.notify_buffer_size' callback in the
'struct virtio_transport' in order to inform the transport,
when the buffer_size is changed by the user. It is also useful
to limit the 'buffer_size' requested (e.g. virtio transports).

Acked-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 18:12:18 -08:00
Stefano Garzarella
daabfbca34 vsock: add 'struct vsock_sock *' param to vsock_core_get_transport()
Since now the 'struct vsock_sock' object contains a pointer to
the transport, this patch adds a parameter to the
vsock_core_get_transport() to return the right transport
assigned to the socket.

This patch modifies also the virtio_transport_get_ops(), that
uses the vsock_core_get_transport(), adding the
'struct vsock_sock *' parameter.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 18:12:18 -08:00
Stefano Garzarella
4c7246dc45 vsock/virtio: add transport parameter to the virtio_transport_reset_no_sock()
We are going to add 'struct vsock_sock *' parameter to
virtio_transport_get_ops().

In some cases, like in the virtio_transport_reset_no_sock(),
we don't have any socket assigned to the packet received,
so we can't use the virtio_transport_get_ops().

In order to allow virtio_transport_reset_no_sock() to use the
'.send_pkt' callback from the 'vhost_transport' or 'virtio_transport',
we add the 'struct virtio_transport *' to it and to its caller:
virtio_transport_recv_pkt().

We moved the 'vhost_transport' and 'virtio_transport' definition,
to pass their address to the virtio_transport_recv_pkt().

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 18:12:18 -08:00
Stefano Garzarella
fe502c4a38 vsock: add 'transport' member in the struct vsock_sock
As a preparation to support multiple transports, this patch adds
the 'transport' member at the 'struct vsock_sock'.
This new field is initialized during the creation in the
__vsock_create() function.

This patch also renames the global 'transport' pointer to
'transport_single', since for now we're only supporting a single
transport registered at run-time.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 18:12:18 -08:00