Add two helpers, start_traffic_pktsize() and start_tcp_traffic_pktsize(),
that allow explicit overriding of packet size. Change start_traffic() and
start_tcp_traffic() to dispatch through these helpers with the default
packet size.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Spectrum machines have two resources related to keeping packets in an
internal buffer: bytes (allocated in cell-sized units) for packet payload,
and descriptors, for keeping metadata. Currently, mlxsw only configures the
bytes part of the resource management.
Spectrum switches permit a full parallel configuration for the descriptor
resources, including port-pool and port-TC-pool quotas. By default, these
are all configured to use pool 14, with an infinite quota. The ingress pool
14 is then infinite in size.
However, egress pool 14 has finite size by default. The size is chip
dependent, but always much lower than what the chip actually permits. As a
result, we can easily construct workloads that exhaust the configured
descriptor limit.
Fix the issue by configuring the egress descriptor pool to be infinite in
size as well. This will maintain the configuration philosophy of the
default configuration, but will unlock all chip resources to be usable.
In the code, include both the configuration of ingress and ingress, mostly
for clarity.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SBPR, or Shared Buffer Pools Register, configures and retrieves the shared
buffer pools and configuration. The desc field determines whether the
configuration relates to the byte pool or the descriptor pool.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tonghao Zhang says:
====================
use standard sysctl macro
From: Tonghao Zhang <xiangxia.m.yue@gmail.com>
This patchset introduce sysctl macro or replace var
with macro.
====================
Link: https://lore.kernel.org/r/20220501035524.91205-1-xiangxia.m.yue@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ath.git patches for v5.19. Major changes:
ath11k
* support setting Specific Absorption Rate (SAR) for WCN6855
* read country code from SMBIOS for WCN6855/QCA6390
* support for WCN6750
DPK is short for digital pre-distortion calibration. It can adjusts digital
waveform according to PA linear characteristics dynamically to enhance
TX EVM.
Do this calibration when we are going to run on AP channel. To prevent
power offset out of boundary, it monitors thermal and set proper boundary
to register.
8852c needs two backup buffers, so we enlarge the array. But, 8852a still
needs only one, so it only uses first element (index zero).
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220502235408.15052-9-pkshih@realtek.com
IQ signal calibration is a very important calibration to yield good RF
performance. We do this calibration only if we are going to run on AP
channel. During scanning phase, without this calibration RF performance
is still acceptable because it transmits with low data rate at this phase.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220502235408.15052-8-pkshih@realtek.com
RX DCK is receiver DC calibration. Do this calibration when bringing up
interface and going to run on AP channel.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220502235408.15052-7-pkshih@realtek.com
RCK is synchronize RC calibration. It needs to be triggered only once when
interface is going to up.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220502235408.15052-6-pkshih@realtek.com
TSSI is transmitter signal strength indication, which is a close-loop
hardware circuit to feedback actual transmitting power as a reference for
next transmission.
When we setup channel to connect an AP, it does full calibration. When
switching bands or channels, it needs to reset hardware status to prevent
use wrong feedback of previous transmission.
To do TX power compensation reflecting current temperature, it loads tables
of compensation values into registers according to channel and band group.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220502235408.15052-5-pkshih@realtek.com
LCK is short fro LC Tank calibration. Do this calibration once driver
loads RF parameters table. Since the characteristic can be changed by
temperature, we do this calibration again if difference of thermal value
is over a threshold.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220502235408.15052-4-pkshih@realtek.com
DACK (digital-to-analog converters calibration) is used to calibrate DAC
to output analog signals as expected.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220502235408.15052-3-pkshih@realtek.com
These tables are used by RFK (RF calibration) to set parameters. These
parameters can trigger certain calibration, or configure/reset settings
before and after RF calibrations.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220502235408.15052-2-pkshih@realtek.com
When deleting an FTE it should have no dests, which means
fte->dests_size should be 0. Add a WARN_ON() to catch bugs
where the proper tracking wasn't done.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Don't call del_hw_fte() directly, instead use the hardware deletion
function set. This is just a small cleanup and doesn't change anything
as for an FTE the deletion function is already set to del_hw_fte().
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When an FTE has no children is means all the rules where removed
and the FTE can be deleted regardless of the dests_size value.
While dests_size should be 0 when there are no children
be extra careful not to leak memory or get firmware syndrome
if the proper bookkeeping of dests_size wasn't done.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Keep track after destinations that are forward destinations.
When a forward destinations is removed from an FTE check if
the actions bits need to be updated.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When the caller doesn't pass a destination fs_core will create a unused
rule just so a context can be returned. This unused rule
is zeroed out and its type is 0 which can be mixed up with
MLX5_FLOW_DESTINATION_TYPE_VPORT.
Create a dedicated type to differentiate between the two
named MLX5_FLOW_DESTINATION_TYPE_NONE.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
For code clarity and to prevent future bugs make sure to jump
to the exit point once done handling that specific type.
This aligns the code with the rest logic in the function.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When deleting a rule make sure that for every type dests_size is
decreased only once and no other logic is executed.
Without this dests_size might be decreased twice when dests_size == 1
so the if for that type won't be entered and if action has
MLX5_FLOW_CONTEXT_ACTION_FWD_DEST set dests_size will be decreased again.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Separate flow destinations between software and IFC.
Flow destination type passed by callers was used as the input in
firmware commands and over the years software only types were added
which resulted in mixing between the two.
Create an IFC enum that contains only the flow destinations defined
when talking to the firmware.
Now that there is a proper software only enum for flow destinations
the hardcoded values can be removed as the values are no longer used
in firmware commands.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Dest type isn't set, this works only because
MLX5_FLOW_DESTINATION_TYPE_VPORT is zero. Set the proper type.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Commit
7a9fb35e8c ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
removed the usage of mlx5e_dcbnl_build_rep_netdev() from the driver,
delete the function.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Print the initializing field in case of FW couldn't initialize before
timeout. This will help to better understand the root cause in some
cases.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Runtime devlink params always read their values from the get() callbacks.
Also, it is an error to set driverinit_value for params which don't
support driverinit cmode. Delete such assignments.
In addition, move the set of default matching mode inside eswitch code.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The memory of spec is allocated with kvzalloc(), the corresponding
release function should not be kfree(), use kvfree() instead.
Generated by: scripts/coccinelle/api/kfree_mismatch.cocci
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Stefano Garzarella says:
====================
vsock/virtio: add support for device suspend/resume
Vilas reported that virtio-vsock no longer worked properly after
suspend/resume (echo mem >/sys/power/state).
It was impossible to connect to the host and vice versa.
Indeed, the support has never been implemented.
This series implement .freeze and .restore callbacks of struct virtio_driver
to support device suspend/resume.
The first patch factors our the code to initialize and delete VQs.
The second patch uses that code to support device suspend/resume.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
====================
Link: https://lore.kernel.org/r/20220428132241.152679-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement .freeze and .restore callbacks of struct virtio_driver
to support device suspend/resume.
During suspension all connected sockets are reset and VQs deleted.
During resume the VQs are re-initialized.
Reported by: Vilas R K <vilas.r.k@intel.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add virtio_vsock_vqs_init() and virtio_vsock_vqs_del() with the code
that was in virtio_vsock_probe() and virtio_vsock_remove to initialize
and delete VQs.
These new functions will be used in the next commit to support device
suspend/resume
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Felix VSC9959 switch in NXP LS1028A supports the tc-gate action
which enforced time-based access control per stream. A stream as seen by
this switch is identified by {MAC DA, VID}.
We use the standard forwarding selftest topology with 2 host interfaces
and 2 switch interfaces. The host ports must require timestamping non-IP
packets and supporting tc-etf offload, for isochron to work. The
isochron program monitors network sync status (ptp4l, phc2sys) and
deterministically transmits packets to the switch such that the tc-gate
action either (a) always accepts them based on its schedule, or
(b) always drops them.
I tried to keep as much of the logic that isn't specific to the NXP
LS1028A in a new tsn_lib.sh, for future reuse. This covers
synchronization using ptp4l and phc2sys, and isochron.
The cycle-time chosen for this selftest isn't particularly impressive
(and the focus is the functionality of the switch), but I didn't really
know what to do better, considering that it will mostly be run during
debugging sessions, various kernel bloatware would be enabled, like
lockdep, KASAN, etc, and we certainly can't run any races with those on.
I tried to look through the kselftest framework for other real time
applications and didn't really find any, so I'm not sure how better to
prepare the environment in case we want to go for a lower cycle time.
At the moment, the only thing the selftest is ensuring is that dynamic
frequency scaling is disabled on the CPU that isochron runs on. It would
probably be useful to have a blacklist of kernel config options (checked
through zcat /proc/config.gz) and some cyclictest scripts to run
beforehand, but I saw none of those.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20220501112953.3298973-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's expensive to make a copy of 40B struct iov_iter to the point it
was taking 0.2-0.5% of all cycles in my tests. iov_iter_revert() should
be fine as it's a simple case without nested reverts/truncates.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a7e1690c00c5dfe700c30eb9a8a81ec59f6545dd.1650884401.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current memory failure code in the debugfs returns -ENOSPC. This is
normally used for indicating that there is no space left on the
device and is not applicable for memory allocation failures.
Replace this with -ENOMEM.
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Link: https://lore.kernel.org/r/20220430194656.44357-1-dossche.niels@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Colin Foster says:
====================
ocelot stats improvement
A couple of pick-ups after f187bfa6f35 ("net: ethernet: ocelot: remove
the need for num_stats initializer") - one addresses a warning
patchwork flagged about operator precedence when using macro arguments.
The other is a reduction of unnecessary memory allocation.
====================
Link: https://lore.kernel.org/r/20220430232327.4091825-1-colin.foster@in-advantage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 2f187bfa6f ("net: ethernet: ocelot: remove the need for num_stats
initializer") added a macro that patchwork warned it lacked parentheses
around an argument. Correct this mistake.
Fixes: 2f187bfa6f ("net: ethernet: ocelot: remove the need for num_stats initializer")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 2f187bfa6f ("net: ethernet: ocelot: remove the need for num_stats
initializer") added a flags field to the ocelot stats structure. The same
behavior can be achieved without this additional field taking up extra
memory.
Remove this structure element to free up RAM
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
pull-request: ieee802154-next 2022-05-01
Miquel Raynal landed two patch series bundled in this pull request.
The first series re-works the symbol duration handling to better
accommodate the needs of the various phy layers in ieee802154.
In the second series Miquel improves th errors handling from drivers
up mac802154. THis streamlines the error handling throughout the
ieee/mac802154 stack in preparation for sync TX to be introduced for
MLME frames.
====================
Link: https://lore.kernel.org/r/20220501194614.1198325-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Defining local versions of NAPI_POLL_WEIGHT with the same
values in the drivers just makes refactoring harder.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220429174643.196994-2-kuba@kernel.org
If the previous list_for_each_entry_continue_rcu() don't exit early
(no goto hit inside the loop), the iterator 'cvif' after the loop
will be a bogus pointer to an invalid structure object containing
the HEAD (&ar->vif_list). As a result, the use of 'cvif' after that
will lead to a invalid memory access (i.e., 'cvif->id': the invalid
pointer dereference when return back to/after the callsite in the
carl9170_update_beacon()).
The original intention should have been to return the valid 'cvif'
when found in list, NULL otherwise. So just return NULL when no
entry found, to fix this bug.
Cc: stable@vger.kernel.org
Fixes: 1f1d9654e1 ("carl9170: refactor carl9170_update_beacon")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220328122820.1004-1-xiam0nd.tong@gmail.com
The comment next to WIL6210_NAPI_BUDGET says "arbitrary".
If we're picking arbitrary values let's pick the recommended
default which is NAPI_POLL_WEIGHT.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220429174643.196994-4-kuba@kernel.org
Defining local versions of NAPI_POLL_WEIGHT with the same
values in the drivers just makes refactoring harder.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220429174643.196994-3-kuba@kernel.org
WCN6750 is non-DBS 2x2 11AX chipset. Unlike QCA6390 which is a
DBS (dual band simultaneous) solution (2 LMACs), WCN6750 has a
single LMAC supporting 2G, 5G and 6G bands but will operate only
on one band at any given point.
WCN6750 is a PCIe based solution, but it is attached to the WPSS
(Wireless Processor SubSystem) Q6 processor, hence it is enumerated
by the Q6 processor. It is registered to the APSS processor
(Application Processor SubSystem) as a platform device(AHB) and
remoteproc APIs are used to boot up or shutdown the device like
other AHB devices.
Also, Device information like BAR and it's size is not known to the
APSS processor as the chip is enumerated by WPSS Q6. These details
are fetched over QMI.
STA and AP modes are supported. Verified basic connectivity and ping
in both the modes.
An important point to note is that though WCN6750 is a PCIe device,
it cannot be attached to any other platform except on Qualcomm
Snapdragon SoCs due to the aforementioned reasons.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220429170502.20080-10-quic_mpubbise@quicinc.com
HAL RX descriptor for WCN6750 is same as QCN9074, this
means that the size of the HAL RX decriptor and the DP
APIs that WCN6750 requires to enable datapath should be
initialized with that of QCN9074's RX descriptor size
and the DP APIs respectively. There is one change wrt to
REO configuration though, REO configuration for WCN6750
follows WCN6855, therefore use reo_setup() of WCN6855
for WCN6750.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220429170502.20080-9-quic_mpubbise@quicinc.com
Add HAL changes required to support WCN6750. Offsets of some registers
for WCN6750 are different from other supported devices; move such
register offsets to platform specific ath11k_hw_regs.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220429170502.20080-8-quic_mpubbise@quicinc.com
