An atomic write is a write issued with torn-write protection, meaning
that for a power failure or any other hardware failure, all or none of the
data from the write will be stored, but never a mix of old and new data.
Userspace may add flag RWF_ATOMIC to pwritev2() to indicate that the
write is to be issued with torn-write prevention, according to special
alignment and length rules.
For any syscall interface utilizing struct iocb, add IOCB_ATOMIC for
iocb->ki_flags field to indicate the same.
A call to statx will give the relevant atomic write info for a file:
- atomic_write_unit_min
- atomic_write_unit_max
- atomic_write_segments_max
Both min and max values must be a power-of-2.
Applications can avail of atomic write feature by ensuring that the total
length of a write is a power-of-2 in size and also sized between
atomic_write_unit_min and atomic_write_unit_max, inclusive. Applications
must ensure that the write is at a naturally-aligned offset in the file
wrt the total write length. The value in atomic_write_segments_max
indicates the upper limit for IOV_ITER iovcnt.
Add file mode flag FMODE_CAN_ATOMIC_WRITE, so files which do not have the
flag set will have RWF_ATOMIC rejected and not just ignored.
Add a type argument to kiocb_set_rw_flags() to allows reads which have
RWF_ATOMIC set to be rejected.
Helper function generic_atomic_write_valid() can be used by FSes to verify
compliant writes. There we check for iov_iter type is for ubuf, which
implies iovcnt==1 for pwritev2(), which is an initial restriction for
atomic_write_segments_max. Initially the only user will be bdev file
operations write handler. We will rely on the block BIO submission path to
ensure write sizes are compliant for the bdev, so we don't need to check
atomic writes sizes yet.
Signed-off-by: Prasad Singamsetty <prasad.singamsetty@oracle.com>
jpg: merge into single patch and much rewrite
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-4-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZkzp/gAKCRBZ7Krx/gZQ
63KFAQCsKv3XdcF+2BO+QuwPvR6eAvDxFjrFEcQFyyOXgFVLaAD/UMM0HcEFWxBb
PCPvyKVP22wF9PbodkrKJn8DRdtRZwM=
=jvWv
-----END PGP SIGNATURE-----
Merge tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted commits that had missed the last merge window..."
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
remove call_{read,write}_iter() functions
do_dentry_open(): kill inode argument
kernel_file_open(): get rid of inode argument
get_file_rcu(): no need to check for NULL separately
fd_is_open(): move to fs/file.c
close_on_exec(): pass files_struct instead of fdtable
-----BEGIN PGP SIGNATURE-----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=DwAV
-----END PGP SIGNATURE-----
Merge tag 'for-6.10/io_uring-20240511' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
- Greatly improve send zerocopy performance, by enabling coalescing of
sent buffers.
MSG_ZEROCOPY already does this with send(2) and sendmsg(2), but the
io_uring side did not. In local testing, the crossover point for send
zerocopy being faster is now around 3000 byte packets, and it
performs better than the sync syscall variants as well.
This feature relies on a shared branch with net-next, which was
pulled into both branches.
- Unification of how async preparation is done across opcodes.
Previously, opcodes that required extra memory for async retry would
allocate that as needed, using on-stack state until that was the
case. If async retry was needed, the on-stack state was adjusted
appropriately for a retry and then copied to the allocated memory.
This led to some fragile and ugly code, particularly for read/write
handling, and made storage retries more difficult than they needed to
be. Allocate the memory upfront, as it's cheap from our pools, and
use that state consistently both initially and also from the retry
side.
- Move away from using remap_pfn_range() for mapping the rings.
This is really not the right interface to use and can cause lifetime
issues or leaks. Additionally, it means the ring sq/cq arrays need to
be physically contigious, which can cause problems in production with
larger rings when services are restarted, as memory can be very
fragmented at that point.
Move to using vm_insert_page(s) for the ring sq/cq arrays, and apply
the same treatment to mapped ring provided buffers. This also helps
unify the code we have dealing with allocating and mapping memory.
Hard to see in the diffstat as we're adding a few features as well,
but this kills about ~400 lines of code from the codebase as well.
- Add support for bundles for send/recv.
When used with provided buffers, bundles support sending or receiving
more than one buffer at the time, improving the efficiency by only
needing to call into the networking stack once for multiple sends or
receives.
- Tweaks for our accept operations, supporting both a DONTWAIT flag for
skipping poll arm and retry if we can, and a POLLFIRST flag that the
application can use to skip the initial accept attempt and rely
purely on poll for triggering the operation. Both of these have
identical flags on the receive side already.
- Make the task_work ctx locking unconditional.
We had various code paths here that would do a mix of lock/trylock
and set the task_work state to whether or not it was locked. All of
that goes away, we lock it unconditionally and get rid of the state
flag indicating whether it's locked or not.
The state struct still exists as an empty type, can go away in the
future.
- Add support for specifying NOP completion values, allowing it to be
used for error handling testing.
- Use set/test bit for io-wq worker flags. Not strictly needed, but
also doesn't hurt and helps silence a KCSAN warning.
- Cleanups for io-wq locking and work assignments, closing a tiny race
where cancelations would not be able to find the work item reliably.
- Misc fixes, cleanups, and improvements
* tag 'for-6.10/io_uring-20240511' of git://git.kernel.dk/linux: (97 commits)
io_uring: support to inject result for NOP
io_uring: fail NOP if non-zero op flags is passed in
io_uring/net: add IORING_ACCEPT_POLL_FIRST flag
io_uring/net: add IORING_ACCEPT_DONTWAIT flag
io_uring/filetable: don't unnecessarily clear/reset bitmap
io_uring/io-wq: Use set_bit() and test_bit() at worker->flags
io_uring/msg_ring: cleanup posting to IOPOLL vs !IOPOLL ring
io_uring: Require zeroed sqe->len on provided-buffers send
io_uring/notif: disable LAZY_WAKE for linked notifs
io_uring/net: fix sendzc lazy wake polling
io_uring/msg_ring: reuse ctx->submitter_task read using READ_ONCE instead of re-reading it
io_uring/rw: reinstate thread check for retries
io_uring/notif: implement notification stacking
io_uring/notif: simplify io_notif_flush()
net: add callback for setting a ubuf_info to skb
net: extend ubuf_info callback to ops structure
io_uring/net: support bundles for recv
io_uring/net: support bundles for send
io_uring/kbuf: add helpers for getting/peeking multiple buffers
io_uring/net: add provided buffer support for IORING_OP_SEND
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZj3HuwAKCRCRxhvAZXjc
orYvAQCZOr68uJaEaXAArYTdnMdQ6HIzG+FVlwrqtrhz0BV07wEAqgmtSR9XKh+L
0+DNepg4R8PZOHH371eSSsLNRCUCkAs=
=SVsU
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.10.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Free up FMODE_* bits. I've freed up bits 6, 7, 8, and 24. That
means we now have six free FMODE_* bits in total (but bit #6
already got used for FMODE_WRITE_RESTRICTED)
- Add FOP_HUGE_PAGES flag (follow-up to FMODE_* cleanup)
- Add fd_raw cleanup class so we can make use of automatic cleanup
provided by CLASS(fd_raw, f)(fd) for O_PATH fds as well
- Optimize seq_puts()
- Simplify __seq_puts()
- Add new anon_inode_getfile_fmode() api to allow specifying f_mode
instead of open-coding it in multiple places
- Annotate struct file_handle with __counted_by() and use
struct_size()
- Warn in get_file() whether f_count resurrection from zero is
attempted (epoll/drm discussion)
- Folio-sophize aio
- Export the subvolume id in statx() for both btrfs and bcachefs
- Relax linkat(AT_EMPTY_PATH) requirements
- Add F_DUPFD_QUERY fcntl() allowing to compare two file descriptors
for dup*() equality replacing kcmp()
Cleanups:
- Compile out swapfile inode checks when swap isn't enabled
- Use (1 << n) notation for FMODE_* bitshifts for clarity
- Remove redundant variable assignment in fs/direct-io
- Cleanup uses of strncpy in orangefs
- Speed up and cleanup writeback
- Move fsparam_string_empty() helper into header since it's currently
open-coded in multiple places
- Add kernel-doc comments to proc_create_net_data_write()
- Don't needlessly read dentry->d_flags twice
Fixes:
- Fix out-of-range warning in nilfs2
- Fix ecryptfs overflow due to wrong encryption packet size
calculation
- Fix overly long line in xfs file_operations (follow-up to FMODE_*
cleanup)
- Don't raise FOP_BUFFER_{R,W}ASYNC for directories in xfs (follow-up
to FMODE_* cleanup)
- Don't call xfs_file_open from xfs_dir_open (follow-up to FMODE_*
cleanup)
- Fix stable offset api to prevent endless loops
- Fix afs file server rotations
- Prevent xattr node from overflowing the eraseblock in jffs2
- Move fdinfo PTRACE_MODE_READ procfs check into the .permission()
operation instead of .open() operation since this caused userspace
regressions"
* tag 'vfs-6.10.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (39 commits)
afs: Fix fileserver rotation getting stuck
selftests: add F_DUPDFD_QUERY selftests
fcntl: add F_DUPFD_QUERY fcntl()
file: add fd_raw cleanup class
fs: WARN when f_count resurrection is attempted
seq_file: Simplify __seq_puts()
seq_file: Optimize seq_puts()
proc: Move fdinfo PTRACE_MODE_READ check into the inode .permission operation
fs: Create anon_inode_getfile_fmode()
xfs: don't call xfs_file_open from xfs_dir_open
xfs: drop fop_flags for directories
xfs: fix overly long line in the file_operations
shmem: Fix shmem_rename2()
libfs: Add simple_offset_rename() API
libfs: Fix simple_offset_rename_exchange()
jffs2: prevent xattr node from overflowing the eraseblock
vfs, swap: compile out IS_SWAPFILE() on swapless configs
vfs: relax linkat() AT_EMPTY_PATH - aka flink() - requirements
fs/direct-io: remove redundant assignment to variable retval
fs/dcache: Re-use value stored to dentry->d_flags instead of re-reading
...
Allowing retries for everything is arguably the right thing to do, now
that every command type is async read from the start. But it's exposed a
few issues around missing check for a retry (which cca6571381 exposed),
and the fixup commit for that isn't necessarily 100% sound in terms of
iov_iter state.
For now, just revert these two commits. This unfortunately then re-opens
the fact that -EAGAIN can get bubbled to userspace for some cases where
the kernel very well could just sanely retry them. But until we have all
the conditions covered around that, we cannot safely enable that.
This reverts commit df604d2ad4.
This reverts commit cca6571381.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit removed the checking on whether or not it was possible
to retry a request, since it's now possible to retry any of them. This
would previously have caused the request to have been ended with an error,
but now the retry condition can simply get lost instead.
Cleanup the retry handling and always just punt it to task_work, which
will queue it with io-wq appropriately.
Reported-by: Changhui Zhong <czhong@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Fixes: cca6571381 ("io_uring/rw: cleanup retry path")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These have no clear purpose. This is effectively a revert of commit
bb7462b6fd ("vfs: use helpers for calling f_op->{read,write}_iter()").
The patch was created with the help of a coccinelle script.
Fixes: bb7462b6fd ("vfs: use helpers for calling f_op->{read,write}_iter()")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently lists are being used to manage this, but best practice is
usually to have these in an array instead as that it cheaper to manage.
Outside of that detail, games are also played with KASAN as the list
is inside the cached entry itself.
Finally, all users of this need a struct io_cache_entry embedded in
their struct, which is union'ized with something else in there that
isn't used across the free -> realloc cycle.
Get rid of all of that, and simply have it be an array. This will not
change the memory used, as we're just trading an 8-byte member entry
for the per-elem array size.
This reduces the overhead of the recycled allocations, and it reduces
the amount of code code needed to support recycling to about half of
what it currently is.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let the io_async_rw hold on to the iovec and reuse it, rather than always
allocate and free them.
Also enables KASAN for the iovec entries, so that reuse can be detected
even while they are in the cache.
While doing so, shrink io_async_rw by getting rid of the bigger embedded
fast iovec. Since iovecs are being recycled now, shrink it from 8 to 1.
This reduces the io_async_rw size from 264 to 160 bytes, a 40% reduction.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We no longer need to gate a potential retry on whether or not the
context matches our original task, as all read/write operations have
been fully prepared upfront. This means there's never any re-import
needed, and hence we can always retry requests.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
read/write requests try to put everything on the stack, and then alloc
and copy if a retry is needed. This necessitates a bunch of nasty code
that deals with intermediate state.
Get rid of this, and have the prep side setup everything that is needed
upfront, which greatly simplifies the opcode handlers.
This includes adding an alloc cache for io_async_rw, to make it cheap
to handle.
In terms of cost, this should be basically free and transparent. For
the worst case of {READ,WRITE}_FIXED which didn't need it before,
performance is unaffected in the normal peak workload that is being
used to test that. Still runs at 122M IOPS.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The restriction on multishot execution context disallowing io-wq is
driven by rules of io_fill_cqe_req_aux(), it should only be called in
the master task context, either from the syscall path or in task_work.
Since task_work now always takes the ctx lock implying
IO_URING_F_COMPLETE_DEFER, we can just assume that the function is
always called with its defer argument set to true.
Kill the argument. Also rename the function for more consistency as
"fill" in CQE related functions was usually meant for raw interfaces
only copying data into the CQ without any locking, waking the user
and other accounting "post" functions take care of.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/93423d106c33116c7d06bf277f651aa68b427328.1710799188.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ctx is always locked for task_work now, so get rid of struct
io_tw_state::locked. Note I'm stopping one step before removing
io_tw_state altogether, which is not empty, because it still serves the
purpose of indicating which function is a tw callback and forcing users
not to invoke them carelessly out of a wrong context. The removal can
always be done later.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/e95e1ea116d0bfa54b656076e6a977bc221392a4.1710799188.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
kiocb_done() should care to specifically redirecting requests to io-wq.
Remove the hopping to tw to then queue an io-wq, return -EAGAIN and let
the core code io_uring handle offloading.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/413564e550fe23744a970e1783dfa566291b0e6f.1710799188.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's a bunch of flags that are purely based on what the file
operations support while also never being conditionally set or unset.
IOW, they're not subject to change for individual files. Imho, such
flags don't need to live in f_mode they might as well live in the fops
structs itself. And the fops struct already has that lonely
mmap_supported_flags member. We might as well turn that into a generic
fop_flags member and move a few flags from FMODE_* space into FOP_*
space. That gets us four FMODE_* bits back and the ability for new
static flags that are about file ops to not have to live in FMODE_*
space but in their own FOP_* space. It's not the most beautiful thing
ever but it gets the job done. Yes, there'll be an additional pointer
chase but hopefully that won't matter for these flags.
I suspect there's a few more we can move into there and that we can also
redirect a bunch of new flag suggestions that follow this pattern into
the fop_flags field instead of f_mode.
Link: https://lore.kernel.org/r/20240328-gewendet-spargel-aa60a030ef74@brauner
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Supporting multishot reads requires support for NOWAIT, as the
alternative would be always having io-wq execute the work item whenever
the poll readiness triggered. Any fast file type will have NOWAIT
support (eg it understands both O_NONBLOCK and IOCB_NOWAIT). If the
given file type does not, then simply resort to single shot execution.
Cc: stable@vger.kernel.org
Fixes: fc68fcda04 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If read multishot is being invoked from the poll retry handler, then we
should return IOU_ISSUE_SKIP_COMPLETE rather than -EAGAIN. If not, then
a CQE will be posted with -EAGAIN rather than triggering the retry when
the file is flagged as readable again.
Cc: stable@vger.kernel.org
Reported-by: Sargun Dhillon <sargun@meta.com>
Fixes: fc68fcda04 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We disallow DEFER_TASKRUN multishots from running by io-wq, which is
checked by individual opcodes in the issue path. We can consolidate all
it in io_wq_submit_work() at the same time moving the checks out of the
hot path.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e492f0f11588bb5aa11d7d24e6f53b7c7628afdb.1709905727.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We only use the flag for this purpose, so rename it accordingly. This
further prevents various other use cases of it, keeping it clean and
consistent. Then we can also check it in one spot, when it's being
attempted recycled, and remove some dead code in io_kbuf_recycle_ring().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Changes to AF_UNIX trigger rebuild of io_uring, but io_uring does
not use AF_UNIX anymore.
Let's not include af_unix.h and instead include necessary headers.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240212234236.63714-1-kuniyu@amazon.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Any read/write opcode has needs_file == true, which means that we
would've failed the request long before reaching the issue stage if we
didn't successfully assign a file. This check has been dead forever,
and is really a leftover from generic code.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds a flag to avoid dipping dereferencing file and then f_op to
figure out if the file has a poll handler defined or not. We generally
call this at least twice for networked workloads, and if using ring
provided buffers, we do it on every buffer selection. Particularly the
latter is troublesome, as it's otherwise a very fast operation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_read_mshot() always relies on poll triggering retries, and this works
fine as long as we do a retry per size of the buffer being read. The
buffer size is given by the size of the buffer(s) in the given buffer
group ID.
But if we're reading less than what is available, then we don't always
get to read everything that is available. For example, if the buffers
available are 32 bytes and we have 64 bytes to read, then we'll
correctly read the first 32 bytes and then wait for another poll trigger
before we attempt the next read. This next poll trigger may never
happen, in which case we just sit forever and never make progress, or it
may trigger at some point in the future, and now we're just delivering
the available data much later than we should have.
io_read_mshot() could do retries itself, but that is wasteful as we'll
be going through all of __io_read() again, and most likely in vain.
Rather than do that, bump our poll reference count and have
io_poll_check_events() do one more loop and check with vfs_poll() if we
have more data to read. If we do, io_read_mshot() will get invoked again
directly and we'll read the next chunk.
io_poll_multishot_retry() must only get called from inside
io_poll_issue(), which is our multishot retry handler, as we know we
already "own" the request at this point.
Cc: stable@vger.kernel.org
Link: https://github.com/axboe/liburing/issues/1041
Fixes: fc68fcda04 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This originally came from the aio side, and it's laid out rather oddly.
The common case here is that we either get -EIOCBQUEUED from submitting
an async request, or that we complete the request correctly with the
given number of bytes. Handling the odd internal restart error codes
is not a common operation.
Lay it out a bit more optimally that better explains the normal flow,
and switch to avoiding the indirect call completely as this is our
kiocb and we know the completion handler can only be one of two
possible variants. While at it, move it to where it belongs in the
file, with fellow end IO helpers.
Outside of being easier to read, this also reduces the text size of the
function by 24 bytes for me on arm64.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If IOSQE_ASYNC is set and we fail importing an iovec for a readv or
writev request, then we leave ->bytes_done uninitialized and hence the
eventual failure CQE posted can potentially have a random res value
rather than the expected -EINVAL.
Setup ->bytes_done before potentially failing, so we have a consistent
value if we fail the request early.
Cc: stable@vger.kernel.org
Reported-by: xingwei lee <xrivendell7@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
linux/io_uring.h is slowly becoming a rubbish bin where we put
anything exposed to other subsystems. For instance, the task exit
hooks and io_uring cmd infra are completely orthogonal and don't need
each other's definitions. Start cleaning it up by splitting out all
command bits into a new header file.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7ec50bae6e21f371d3850796e716917fc141225a.1701391955.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When doing a multishot read, the code path reuses the old read
paths. However this breaks an assumption built into those paths,
namely that struct io_rw::len is available for reuse by __io_import_iovec.
For multishot this results in len being set for the first receive
call, and then subsequent calls are clamped to that buffer length
incorrectly.
Instead keep len as zero after recycling buffers, to reuse the full
buffer size of the next selected buffer.
Fixes: fc68fcda04 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Dylan Yudaken <dyudaken@gmail.com>
Link: https://lore.kernel.org/r/20231106203909.197089-4-dyudaken@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For addr: this field is not used, since buffer select is forced.
But by forcing it to be zero it leaves open future uses of the field.
len is actually usable, you could imagine that you want to receive
multishot up to a certain length.
However right now this is not how it is implemented, and it seems
safer to force this to be zero.
Fixes: fc68fcda04 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Dylan Yudaken <dyudaken@gmail.com>
Link: https://lore.kernel.org/r/20231106203909.197089-3-dyudaken@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than sprinkle opcode checks in the generic read/write prep handler,
have a separate prep handler for the vectored readv/writev operation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than sprinkle opcode checks in the generic read/write prep handler,
have a separate prep handler for the vectored readv/writev operation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The new read multishot method doesn't need to allocate async data ever,
as it doesn't do vectored IO and it must only be used with provided
buffers. While it doesn't have ->prep_async() set, it also sets
->async_size to 0, which is different from any other read/write type we
otherwise support.
If it's used on a file type that isn't pollable, we do try and allocate
this async data, and then try and use that data. But since we passed in
a size of 0 for the data, we get a NULL back on data allocation. We then
proceed to dereference that to copy state, and that obviously won't end
well.
Add a check in io_setup_async_rw() for this condition, and avoid copying
state. Also add a check for whether or not buffer selection is specified
in prep while at it.
Fixes: fc68fcda04 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218101
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=okQ8
-----END PGP SIGNATURE-----
Merge tag 'for-6.7/io_uring-2023-10-30' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"This contains the core io_uring updates, of which there are not many,
and adds support for using WAITID through io_uring and hence not
needing to block on these kinds of events.
Outside of that, tweaks to the legacy provided buffer handling and
some cleanups related to cancelations for uring_cmd support"
* tag 'for-6.7/io_uring-2023-10-30' of git://git.kernel.dk/linux:
io_uring/poll: use IOU_F_TWQ_LAZY_WAKE for wakeups
io_uring/kbuf: Use slab for struct io_buffer objects
io_uring/kbuf: Allow the full buffer id space for provided buffers
io_uring/kbuf: Fix check of BID wrapping in provided buffers
io_uring/rsrc: cleanup io_pin_pages()
io_uring: cancelable uring_cmd
io_uring: retain top 8bits of uring_cmd flags for kernel internal use
io_uring: add IORING_OP_WAITID support
exit: add internal include file with helpers
exit: add kernel_waitid_prepare() helper
exit: move core of do_wait() into helper
exit: abstract out should_wake helper for child_wait_callback()
io_uring/rw: add support for IORING_OP_READ_MULTISHOT
io_uring/rw: mark readv/writev as vectored in the opcode definition
io_uring/rw: split io_read() into a helper
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZTxSwQAKCRBZ7Krx/gZQ
6zadAP9o/724KPDCY3ybgwKyEQ1UNjHTriFRBeoF3o2q0WgidwEA+/xS0Xk3i25w
xnSZO/8My1edE1IcK/JDwewH/J+4Kw0=
=N/Lv
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc filesystem fixes from Al Viro:
"Assorted fixes all over the place: literally nothing in common, could
have been three separate pull requests.
All are simple regression fixes, but not for anything from this cycle"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ceph_wait_on_conflict_unlink(): grab reference before dropping ->d_lock
io_uring: kiocb_done() should *not* trust ->ki_pos if ->{read,write}_iter() failed
sparc32: fix a braino in fault handling in csum_and_copy_..._user()
->ki_pos value is unreliable in such cases. For an obvious example,
consider O_DSYNC write - we feed the data to page cache and start IO,
then we make sure it's completed. Update of ->ki_pos is dealt with
by the first part; failure in the second ends up with negative value
returned _and_ ->ki_pos left advanced as if sync had been successful.
In the same situation write(2) does not advance the file position
at all.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If an application does O_DIRECT writes with io_uring and the file system
supports IOCB_DIO_CALLER_COMP, then completions of the dio write side is
done from the task_work that will post the completion event for said
write as well.
Whenever a dio write is done against a file, the inode i_dio_count is
elevated. This enables other callers to use inode_dio_wait() to wait for
previous writes to complete. If we defer the full dio completion to
task_work, we are dependent on that task_work being run before the
inode i_dio_count can be decremented.
If the same task that issues io_uring dio writes with
IOCB_DIO_CALLER_COMP performs a synchronous system call that calls
inode_dio_wait(), then we can deadlock as we're blocked sleeping on
the event to become true, but not processing the completions that will
result in the inode i_dio_count being decremented.
Until we can guarantee that this is the case, then disable the deferred
caller completions.
Fixes: 099ada2c87 ("io_uring/rw: add write support for IOCB_DIO_CALLER_COMP")
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This behaves like IORING_OP_READ, except:
1) It only supports pollable files (eg pipes, sockets, etc). Note that
for sockets, you probably want to use recv/recvmsg with multishot
instead.
2) It supports multishot mode, meaning it will repeatedly trigger a
read and fill a buffer when data is available. This allows similar
use to recv/recvmsg but on non-sockets, where a single request will
repeatedly post a CQE whenever data is read from it.
3) Because of #2, it must be used with provided buffers. This is
uniformly true across any request type that supports multishot and
transfers data, with the reason being that it's obviously not
possible to pass in a single buffer for the data, as multiple reads
may very well trigger before an application has a chance to process
previous CQEs and the data passed from them.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is cleaner than gating on the opcode type, particularly as more
read/write type opcodes may be added.
Then we can use that for the data import, and for __io_read() on
whether or not we need to copy state.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add __io_read() which does the grunt of the work, leaving the completion
side to the new io_read(). No functional changes in this patch.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmTs06gQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpq2jEACE+A8T1/teQmMA9PcIhG2gWSltlSmAKkVe
6Yy6FaXBc7M/1yINGWU+dam5xhTshEuGulgris5Yt8VcX7eas9KQvT1NGDa2KzP4
D44i4UbMD4z9E7arx67Eyvql0sd9LywQTa2nJB+o9yXmQUhTbkWPmMaIWmZi5QwP
KcOqzdve+xhWSwdzNsPltB3qnma/WDtguaauh41GksKpUVe+aDi8EDEnFyRTM2Be
HTTJEH2ZyxYwDzemR8xxr82eVz7KdTVDvn+ZoA/UM6I3SGj6SBmtj5mDLF1JKetc
I+IazsSCAE1kF7vmDbmxYiIvmE6d6I/3zwgGrKfH4dmysqClZvJQeG3/53XzSO5N
k0uJebB/S610EqQhAIZ1/KgjRVmrd75+2af+AxsC2pFeTaQRE4plCJgWhMbJleAE
XBnnC7TbPOWCKaZ6a5UKu8CE1FJnEROmOASPP6tRM30ah5JhlyLU4/4ce+uUPUQo
bhzv0uAQr5Ezs9JPawj+BTa3A4iLCpLzE+aSB46Czl166Eg57GR5tr5pQLtcwjus
pN5BO7o4y5BeWu1XeQQObQ5OiOBXqmbcl8aQepBbU4W8qRSCMPXYWe2+8jbxk3VV
3mZZ9iXxs71ntVDL8IeZYXH7NZK4MLIrqdeM5YwgpSioYAUjqxTm7a8I5I9NCvUx
DZIBNk2sAA==
=XS+G
-----END PGP SIGNATURE-----
Merge tag 'for-6.6/io_uring-2023-08-28' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"Fairly quiet round in terms of features, mostly just improvements all
over the map for existing code. In detail:
- Initial support for socket operations through io_uring. Latter half
of this will likely land with the 6.7 kernel, then allowing things
like get/setsockopt (Breno)
- Cleanup of the cancel code, and then adding support for canceling
requests with the opcode as the key (me)
- Improvements for the io-wq locking (me)
- Fix affinity setting for SQPOLL based io-wq (me)
- Remove the io_uring userspace code. These were added initially as
copies from liburing, but all of them have since bitrotted and are
way out of date at this point. Rather than attempt to keep them in
sync, just get rid of them. People will have liburing available
anyway for these examples. (Pavel)
- Series improving the CQ/SQ ring caching (Pavel)
- Misc fixes and cleanups (Pavel, Yue, me)"
* tag 'for-6.6/io_uring-2023-08-28' of git://git.kernel.dk/linux: (47 commits)
io_uring: move iopoll ctx fields around
io_uring: move multishot cqe cache in ctx
io_uring: separate task_work/waiting cache line
io_uring: banish non-hot data to end of io_ring_ctx
io_uring: move non aligned field to the end
io_uring: add option to remove SQ indirection
io_uring: compact SQ/CQ heads/tails
io_uring: force inline io_fill_cqe_req
io_uring: merge iopoll and normal completion paths
io_uring: reorder cqring_flush and wakeups
io_uring: optimise extra io_get_cqe null check
io_uring: refactor __io_get_cqe()
io_uring: simplify big_cqe handling
io_uring: cqe init hardening
io_uring: improve cqe !tracing hot path
io_uring/rsrc: Annotate struct io_mapped_ubuf with __counted_by
io_uring/sqpoll: fix io-wq affinity when IORING_SETUP_SQPOLL is used
io_uring: simplify io_run_task_work_sig return
io_uring/rsrc: keep one global dummy_ubuf
io_uring: never overflow io_aux_cqe
...
* Make large writes to the page cache fill sparse parts of the cache
with large folios, then use large memcpy calls for the large folio.
* Track the per-block dirty state of each large folio so that a
buffered write to a single byte on a large folio does not result in a
(potentially) multi-megabyte writeback IO.
* Allow some directio completions to be performed in the initiating
task's context instead of punting through a workqueue. This will
reduce latency for some io_uring requests.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZM0Z1AAKCRBKO3ySh0YR
pp7BAQCzkKejCM0185tNIH/faHjzidSisNQkJ5HoB4Opq9U66AEA6IPuAdlPlM/J
FPW1oPq33Yn7AV4wXjUNFfDLzVb/Fgg=
=dFBU
-----END PGP SIGNATURE-----
Merge tag 'iomap-6.6-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"We've got some big changes for this release -- I'm very happy to be
landing willy's work to enable large folios for the page cache for
general read and write IOs when the fs can make contiguous space
allocations, and Ritesh's work to track sub-folio dirty state to
eliminate the write amplification problems inherent in using large
folios.
As a bonus, io_uring can now process write completions in the caller's
context instead of bouncing through a workqueue, which should reduce
io latency dramatically. IOWs, XFS should see a nice performance bump
for both IO paths.
Summary:
- Make large writes to the page cache fill sparse parts of the cache
with large folios, then use large memcpy calls for the large folio.
- Track the per-block dirty state of each large folio so that a
buffered write to a single byte on a large folio does not result in
a (potentially) multi-megabyte writeback IO.
- Allow some directio completions to be performed in the initiating
task's context instead of punting through a workqueue. This will
reduce latency for some io_uring requests"
* tag 'iomap-6.6-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (26 commits)
iomap: support IOCB_DIO_CALLER_COMP
io_uring/rw: add write support for IOCB_DIO_CALLER_COMP
fs: add IOCB flags related to passing back dio completions
iomap: add IOMAP_DIO_INLINE_COMP
iomap: only set iocb->private for polled bio
iomap: treat a write through cache the same as FUA
iomap: use an unsigned type for IOMAP_DIO_* defines
iomap: cleanup up iomap_dio_bio_end_io()
iomap: Add per-block dirty state tracking to improve performance
iomap: Allocate ifs in ->write_begin() early
iomap: Refactor iomap_write_delalloc_punch() function out
iomap: Use iomap_punch_t typedef
iomap: Fix possible overflow condition in iomap_write_delalloc_scan
iomap: Add some uptodate state handling helpers for ifs state bitmap
iomap: Drop ifs argument from iomap_set_range_uptodate()
iomap: Rename iomap_page to iomap_folio_state and others
iomap: Copy larger chunks from userspace
iomap: Create large folios in the buffered write path
filemap: Allow __filemap_get_folio to allocate large folios
filemap: Add fgf_t typedef
...
io_do_iopoll() and io_submit_flush_completions() are pretty similar,
both filling CQEs and then free a list of requests. Don't duplicate it
and make iopoll use __io_submit_flush_completions(), which also helps
with inlining and other optimisations.
For that, we need to first find all completed iopoll requests and splice
them from the iopoll list and then pass it down. This adds one extra
list traversal, which should be fine as requests will stay hot in cache.
CQ locking is already conditional, introduce ->lockless_cq and skip
locking for IOPOLL as it's protected by ->uring_lock.
We also add a wakeup optimisation for IOPOLL to __io_cq_unlock_post(),
so it works just like io_cqring_ev_posted_iopoll().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3840473f5e8a960de35b77292026691880f6bdbc.1692916914.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unlike in the past, io_commit_cqring_flush() doesn't do anything that
may need io_cqring_wake() to be issued after, all requests it completes
will go via task_work. Do io_commit_cqring_flush() after
io_cqring_wake() to clean up __io_cq_unlock_post().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ed32dcfeec47e6c97bd6b18c152ddce5b218403f.1692916914.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use helpers instead of the open coded dance to silence lockdep warnings.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-5-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This helper does not take a kiocb as input and we want to create a
common helper by that name that takes a kiocb as input.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-2-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
If the filesystem dio handler understands IOCB_DIO_CALLER_COMP, we'll
get a kiocb->ki_complete() callback with kiocb->dio_complete set. In
that case, rather than complete the IO directly through task_work, queue
up an intermediate task_work handler that first processes this callback
and then immediately completes the request.
For XFS, this avoids a punt through a workqueue, which is a lot less
efficient and adds latency to lower queue depth (or sync) O_DIRECT
writes.
Only do this for non-polled IO, as polled IO doesn't need this kind
of deferral as it always completes within the task itself. This then
avoids a check for deferral in the polled IO completion handler.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Two of the three callers want them, so return the more usual format,
and shift into the FFS_ form only for the fixed file table.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230620113235.920399-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
