Currently, in bonding it reused the IFF_SLAVE flag and checked it
in ipv6 addrconf to prevent ipv6 addrconf.
However, it is not a proper flag to use for no ipv6 addrconf, for
bonding it has to move IFF_SLAVE flag setting ahead of dev_open()
in bond_enslave(). Also, IFF_MASTER/SLAVE are historical flags
used in bonding and eql, as Jiri mentioned, the new devices like
Team, Failover do not use this flag.
So as Jiri suggested, this patch adds IFF_NO_ADDRCONF in priv_flags
of the device to indicate no ipv6 addconf, and uses it in bonding
and moves IFF_SLAVE flag setting back to its original place.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow UDP_L4 for robust packets.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the kernel was short on (atomic) memory and failed to allocate it -
don't proceed to creation of request socket. Otherwise the socket would
be unsigned and userspace likely doesn't expect that the TCP is not
MD5-signed anymore.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To do that, separate two scenarios:
- where it's the first MD5 key on the system, which means that enabling
of the static key may need to sleep;
- copying of an existing key from a listening socket to the request
socket upon receiving a signed TCP segment, where static key was
already enabled (when the key was added to the listening socket).
Now the life-time of the static branch for TCP-MD5 is until:
- last tcp_md5sig_info is destroyed
- last socket in time-wait state with MD5 key is closed.
Which means that after all sockets with TCP-MD5 keys are gone, the
system gets back the performance of disabled md5-key static branch.
While at here, provide static_key_fast_inc() helper that does ref
counter increment in atomic fashion (without grabbing cpus_read_lock()
on CONFIG_JUMP_LABEL=y). This is needed to add a new user for
a static_key when the caller controls the lifetime of another user.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
ipsec-next 2022-11-26
1) Remove redundant variable in esp6.
From Colin Ian King.
2) Update x->lastused for every packet. It was used only for
outgoing mobile IPv6 packets, but showed to be usefull
to check if the a SA is still in use in general.
From Antony Antony.
3) Remove unused variable in xfrm_byidx_resize.
From Leon Romanovsky.
4) Finalize extack support for xfrm.
From Sabrina Dubroca.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: add extack to xfrm_set_spdinfo
xfrm: add extack to xfrm_alloc_userspi
xfrm: add extack to xfrm_do_migrate
xfrm: add extack to xfrm_new_ae and xfrm_replay_verify_len
xfrm: add extack to xfrm_del_sa
xfrm: add extack to xfrm_add_sa_expire
xfrm: a few coding style clean ups
xfrm: Remove not-used total variable
xfrm: update x->lastused for every packet
esp6: remove redundant variable err
====================
Link: https://lore.kernel.org/r/20221126110303.1859238-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
ipsec 2022-11-23
1) Fix "disable_policy" on ipv4 early demuxP Packets after
the initial packet in a flow might be incorectly dropped
on early demux if there are no matching policies.
From Eyal Birger.
2) Fix a kernel warning in case XFRM encap type is not
available. From Eyal Birger.
3) Fix ESN wrap around for GSO to avoid a double usage of a
sequence number. From Christian Langrock.
4) Fix a send_acquire race with pfkey_register.
From Herbert Xu.
5) Fix a list corruption panic in __xfrm_state_delete().
Thomas Jarosch.
6) Fix an unchecked return value in xfrm6_init().
Chen Zhongjin.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Fix ignored return value in xfrm6_init()
xfrm: Fix oops in __xfrm_state_delete()
af_key: Fix send_acquire race with pfkey_register
xfrm: replay: Fix ESN wrap around for GSO
xfrm: lwtunnel: squelch kernel warning in case XFRM encap type is not available
xfrm: fix "disable_policy" on ipv4 early demux
====================
Link: https://lore.kernel.org/r/20221123093117.434274-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we call connect() for a socket bound to a wildcard address, we update
saddr locklessly. However, it could result in a data race; another thread
iterating over bhash might see a corrupted address.
Let's update saddr under the bhash bucket's lock.
Fixes: 3df80d9320 ("[DCCP]: Introduce DCCPv6")
Fixes: 7c657876b6 ("[DCCP]: Initial implementation")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When connect() is called on a socket bound to the wildcard address,
we change the socket's saddr to a local address. If the socket
fails to connect() to the destination, we have to reset the saddr.
However, when an error occurs after inet_hash6?_connect() in
(dccp|tcp)_v[46]_conect(), we forget to reset saddr and leave
the socket bound to the address.
From the user's point of view, whether saddr is reset or not varies
with errno. Let's fix this inconsistent behaviour.
Note that after this patch, the repro [0] will trigger the WARN_ON()
in inet_csk_get_port() again, but this patch is not buggy and rather
fixes a bug papering over the bhash2's bug for which we need another
fix.
For the record, the repro causes -EADDRNOTAVAIL in inet_hash6_connect()
by this sequence:
s1 = socket()
s1.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
s1.bind(('127.0.0.1', 10000))
s1.sendto(b'hello', MSG_FASTOPEN, (('127.0.0.1', 10000)))
# or s1.connect(('127.0.0.1', 10000))
s2 = socket()
s2.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
s2.bind(('0.0.0.0', 10000))
s2.connect(('127.0.0.1', 10000)) # -EADDRNOTAVAIL
s2.listen(32) # WARN_ON(inet_csk(sk)->icsk_bind2_hash != tb2);
[0]: https://syzkaller.appspot.com/bug?extid=015d756bbd1f8b5c8f09
Fixes: 3df80d9320 ("[DCCP]: Introduce DCCPv6")
Fixes: 7c657876b6 ("[DCCP]: Initial implementation")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When IPv6 module initializing in xfrm6_init(), register_pernet_subsys()
is possible to fail but its return value is ignored.
If IPv6 initialization fails later and xfrm6_fini() is called,
removing uninitialized list in xfrm6_net_ops will cause null-ptr-deref:
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 330 Comm: insmod
RIP: 0010:unregister_pernet_operations+0xc9/0x450
Call Trace:
<TASK>
unregister_pernet_subsys+0x31/0x3e
xfrm6_fini+0x16/0x30 [ipv6]
ip6_route_init+0xcd/0x128 [ipv6]
inet6_init+0x29c/0x602 [ipv6]
...
Fix it by catching the error return value of register_pernet_subsys().
Fixes: 8d068875ca ("xfrm: make gc_thresh configurable in all namespaces")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We assume the correct errno is -EADDRINUSE when sk->sk_prot->get_port()
fails, so some ->get_port() functions return just 1 on failure and the
callers return -EADDRINUSE instead.
However, mptcp_get_port() can return -EINVAL. Let's not ignore the error.
Note the only exception is inet_autobind(), all of whose callers return
-EAGAIN instead.
Fixes: cec37a6e41 ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of code paths in tunnels are lockless (eg NETIF_F_LLTX in tx).
Adopt SMP safe DEV_STATS_{INC|ADD}() to update dev->stats fields.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error
concurrently.
This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit()
is not protected by a spinlock.
While original KCSAN report was about tx path, rx path has the same issue.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adopt atomic_try_cmpxchg() which is slightly more efficient.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We will soon introduce an optional per-netns hash table
for UDP.
This means we cannot use udp_table directly in most places.
Instead, access it via net->ipv4.udp_table.
The access will be valid only while initialising udp_table
itself and creating/destroying each netns.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We will soon introduce an optional per-netns hash table
for UDP.
This means we cannot use the global udp_seq_afinfo.udp_table
to fetch a UDP hash table.
Instead, set NULL to udp_seq_afinfo.udp_table for UDP and get
a proper table from net->ipv4.udp_table.
Note that we still need udp_seq_afinfo.udp_table for UDP LITE.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We will soon introduce an optional per-netns hash table
for UDP.
This means we cannot use the global sk->sk_prot->h.udp_table
to fetch a UDP hash table.
Instead, set NULL to sk->sk_prot->h.udp_table for UDP and get
a proper table from net->ipv4.udp_table.
Note that we still need sk->sk_prot->h.udp_table for UDP LITE.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds no functional change and cleans up some functions
that the following patches touch around so that we make them tidy
and easy to review/revert. The change is mainly to keep reverse
christmas tree order.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
1) Fix sparse warning in the new nft_inner expression, reported
by Jakub Kicinski.
2) Incorrect vlan header check in nft_inner, from Peng Wu.
3) Two patches to pass reset boolean to expression dump operation,
in preparation for allowing to reset stateful expressions in rules.
This adds a new NFT_MSG_GETRULE_RESET command. From Phil Sutter.
4) Inconsistent indentation in nft_fib, from Jiapeng Chong.
5) Speed up siphash calculation in conntrack, from Florian Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: conntrack: use siphash_4u64
netfilter: rpfilter/fib: clean up some inconsistent indenting
netfilter: nf_tables: Introduce NFT_MSG_GETRULE_RESET
netfilter: nf_tables: Extend nft_expr_ops::dump callback parameters
netfilter: nft_inner: fix return value check in nft_inner_parse_l2l3()
netfilter: nft_payload: use __be16 to store gre version
====================
Link: https://lore.kernel.org/r/20221115095922.139954-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a 'reset' flag just like with nft_object_ops::dump. This will be
useful to reset "anonymous stateful objects", e.g. simple rule counters.
No functional change intended.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-----BEGIN PGP SIGNATURE-----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=q04p
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-next-20221108' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
rxrpc changes
David Howells says:
====================
rxrpc: Increasing SACK size and moving away from softirq, part 1
AF_RXRPC has some issues that need addressing:
(1) The SACK table has a maximum capacity of 255, but for modern networks
that isn't sufficient. This is hard to increase in the upstream code
because of the way the application thread is coupled to the softirq
and retransmission side through a ring buffer. Adjustments to the rx
protocol allows a capacity of up to 8192, and having a ring
sufficiently large to accommodate that would use an excessive amount
of memory as this is per-call.
(2) Processing ACKs in softirq mode causes the ACKs get conflated, with
only the most recent being considered. Whilst this has the upside
that the retransmission algorithm only needs to deal with the most
recent ACK, it causes DATA transmission for a call to be very bursty
because DATA packets cannot be transmitted in softirq mode. Rather
transmission must be delegated to either the application thread or a
workqueue, so there tend to be sudden bursts of traffic for any
particular call due to scheduling delays.
(3) All crypto in a single call is done in series; however, each DATA
packet is individually encrypted so encryption and decryption of large
calls could be parallelised if spare CPU resources are available.
This is the first of a number of sets of patches that try and address them.
The overall aims of these changes include:
(1) To get rid of the TxRx ring and instead pass the packets round in
queues (eg. sk_buff_head). On the Tx side, each ACK packet comes with
a SACK table that can be parsed as-is, so there's no particular need
to maintain our own; we just have to refer to the ACK.
On the Rx side, we do need to maintain a SACK table with one bit per
entry - but only if packets go missing - and we don't want to have to
perform a complex transformation to get the information into an ACK
packet.
(2) To try and move almost all processing of received packets out of the
softirq handler and into a high-priority kernel I/O thread. Only the
transferral of packets would be left there. I would still use the
encap_rcv hook to receive packets as there's a noticeable performance
drop from letting the UDP socket put the packets into its own queue
and then getting them out of there.
(3) To make the I/O thread also do all the transmission. The app thread
would be responsible for packaging the data into packets and then
buffering them for the I/O thread to transmit. This would make it
easier for the app thread to run ahead of the I/O thread, and would
mean the I/O thread is less likely to have to wait around for a new
packet to come available for transmission.
(4) To logically partition the socket/UAPI/KAPI side of things from the
I/O side of things. The local endpoint, connection, peer and call
objects would belong to the I/O side. The socket side would not then
touch the private internals of calls and suchlike and would not change
their states. It would only look at the send queue, receive queue and
a way to pass a message to cause an abort.
(5) To remove as much locking, synchronisation, barriering and atomic ops
as possible from the I/O side. Exclusion would be achieved by
limiting modification of state to the I/O thread only. Locks would
still need to be used in communication with the UDP socket and the
AF_RXRPC socket API.
(6) To provide crypto offload kernel threads that, when there's slack in
the system, can see packets that need crypting and provide
parallelisation in dealing with them.
(7) To remove the use of system timers. Since each timer would then send
a poke to the I/O thread, which would then deal with it when it had
the opportunity, there seems no point in using system timers if,
instead, a list of timeouts can be sensibly consulted. An I/O thread
only then needs to schedule with a timeout when it is idle.
(8) To use zero-copy sendmsg to send packets. This would make use of the
I/O thread being the sole transmitter on the socket to manage the
dead-reckoning sequencing of the completion notifications. There is a
problem with zero-copy, though: the UDP socket doesn't handle running
out of option memory very gracefully.
With regard to this first patchset, the changes made include:
(1) Some fixes, including a fallback for proc_create_net_single_write(),
setting ack.bufferSize to 0 in ACK packets and a fix for rxrpc
congestion management, which shouldn't be saving the cwnd value
between calls.
(2) Improvements in rxrpc tracepoints, including splitting the timer
tracepoint into a set-timer and a timer-expired trace.
(3) Addition of a new proc file to display some stats.
(4) Some code cleanups, including removing some unused bits and
unnecessary header inclusions.
(5) A change to the recently added UDP encap_err_rcv hook so that it has
the same signature as {ip,ipv6}_icmp_error(), and then just have rxrpc
point its UDP socket's hook directly at those.
(6) Definition of a new struct, rxrpc_txbuf, that is used to hold
transmissible packets of DATA and ACK type in a single 2KiB block
rather than using an sk_buff. This allows the buffer to be on a
number of queues simultaneously more easily, and also guarantees that
the entire block is in a single unit for zerocopy purposes and that
the data payload is aligned for in-place crypto purposes.
(7) ACK txbufs are allocated at proposal and queued for later transmission
rather than being stored in a single place in the rxrpc_call struct,
which means only a single ACK can be pending transmission at a time.
The queue is then drained at various points. This allows the ACK
generation code to be simplified.
(8) The Rx ring buffer is removed. When a jumbo packet is received (which
comprises a number of ordinary DATA packets glued together), it used
to be pointed to by the ring multiple times, with an annotation in a
side ring indicating which subpacket was in that slot - but this is no
longer possible. Instead, the packet is cloned once for each
subpacket, barring the last, and the range of data is set in the skb
private area. This makes it easier for the subpackets in a jumbo
packet to be decrypted in parallel.
(9) The Tx ring buffer is removed. The side annotation ring that held the
SACK information is also removed. Instead, in the event of packet
loss, the SACK data attached an ACK packet is parsed.
(10) Allocate an skcipher request when needed in the rxkad security class
rather than caching one in the rxrpc_call struct. This deals with a
race between externally-driven call disconnection getting rid of the
skcipher request and sendmsg/recvmsg trying to use it because they
haven't seen the completion yet. This is also needed to support
parallelisation as the skcipher request cannot be used by two or more
threads simultaneously.
(11) Call udp_sendmsg() and udpv6_sendmsg() directly rather than going
through kernel_sendmsg() so that we can provide our own iterator
(zerocopy explicitly doesn't work with a KVEC iterator). This also
lets us avoid the overhead of the security hook.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Call udp_sendmsg() and udpv6_sendmsg() directly rather than calling
kernel_sendmsg() as the latter assumes we want a kvec-class iterator.
However, zerocopy explicitly doesn't work with such an iterator.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Change the udp encap_err_rcv signature to match ip_icmp_error() and
ipv6_icmp_error() so that those can be used from the called function and
export them.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
During the initialization of ip6_route_net_init_late(), if file
ipv6_route or rt6_stats fails to be created, the initialization is
successful by default. Therefore, the ipv6_route or rt6_stats file
doesn't be found during the remove in ip6_route_net_exit_late(). It
will cause WRNING.
The following is the stack information:
name 'rt6_stats'
WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460
Modules linked in:
Workqueue: netns cleanup_net
RIP: 0010:remove_proc_entry+0x389/0x460
PKRU: 55555554
Call Trace:
<TASK>
ops_exit_list+0xb0/0x170
cleanup_net+0x4ea/0xb00
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: cdb1876192 ("[NETNS][IPV6] route6 - create route6 proc files for the namespace")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221102020610.351330-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is used to track when a duplicate segment received by various
reassembly units is dropped.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark udp ipv6 as supporting msghdr::ubuf_info. In the original commit
SOCK_SUPPORT_ZC was supposed to be set by a udp_init_sock() call from
udp6_init_sock(), but
d38afeec26 ("tcp/udp: Call inet6_destroy_sock() in IPv6 ...")
removed it and so ipv6 udp misses the flag.
Cc: <stable@vger.kernel.org> # 6.0
Fixes: e993ffe3da ("net: flag sockets supporting msghdr originated zerocopy")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the 32bit UP oddity is gone and 32bit uses always a sequence
count, there is no need for the fetch_irq() variants anymore.
Convert to the regular interface.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
2871edb32f ("can: kvaser_usb: Fix possible completions during init_completion")
abb8670938 ("can: kvaser_usb_leaf: Ignore stale bus-off after start")
8d21f5927a ("can: kvaser_usb_leaf: Fix improved state not being reported")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Another syzbot report [1] with no reproducer hints
at a bug in ip6_gre tunnel (dev:ip6gretap0)
Since ipv6 mcast code makes sure to read dev->mtu once
and applies a sanity check on it (see commit b9b312a7a4
"ipv6: mcast: better catch silly mtu values"), a remaining
possibility is that a layer is able to set dev->mtu to
an underflowed value (high order bit set).
This could happen indeed in ip6gre_tnl_link_config_route(),
ip6_tnl_link_config() and ipip6_tunnel_bind_dev()
Make sure to sanitize mtu value in a local variable before
it is written once on dev->mtu, as lockless readers could
catch wrong temporary value.
[1]
skbuff: skb_over_panic: text:ffff80000b7a2f38 len:40 put:40 head:ffff000149dcf200 data:ffff000149dcf2b0 tail:0xd8 end:0xc0 dev:ip6gretap0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:120
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 10241 Comm: kworker/1:1 Not tainted 6.0.0-rc7-syzkaller-18095-gbbed346d5a96 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/30/2022
Workqueue: mld mld_ifc_work
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_panic+0x4c/0x50 net/core/skbuff.c:116
lr : skb_panic+0x4c/0x50 net/core/skbuff.c:116
sp : ffff800020dd3b60
x29: ffff800020dd3b70 x28: 0000000000000000 x27: ffff00010df2a800
x26: 00000000000000c0 x25: 00000000000000b0 x24: ffff000149dcf200
x23: 00000000000000c0 x22: 00000000000000d8 x21: ffff80000b7a2f38
x20: ffff00014c2f7800 x19: 0000000000000028 x18: 00000000000001a9
x17: 0000000000000000 x16: ffff80000db49158 x15: ffff000113bf1a80
x14: 0000000000000000 x13: 00000000ffffffff x12: ffff000113bf1a80
x11: ff808000081c0d5c x10: 0000000000000000 x9 : 73f125dc5c63ba00
x8 : 73f125dc5c63ba00 x7 : ffff800008161d1c x6 : 0000000000000000
x5 : 0000000000000080 x4 : 0000000000000001 x3 : 0000000000000000
x2 : ffff0001fefddcd0 x1 : 0000000100000000 x0 : 0000000000000089
Call trace:
skb_panic+0x4c/0x50 net/core/skbuff.c:116
skb_over_panic net/core/skbuff.c:125 [inline]
skb_put+0xd4/0xdc net/core/skbuff.c:2049
ip6_mc_hdr net/ipv6/mcast.c:1714 [inline]
mld_newpack+0x14c/0x270 net/ipv6/mcast.c:1765
add_grhead net/ipv6/mcast.c:1851 [inline]
add_grec+0xa20/0xae0 net/ipv6/mcast.c:1989
mld_send_cr+0x438/0x5a8 net/ipv6/mcast.c:2115
mld_ifc_work+0x38/0x290 net/ipv6/mcast.c:2653
process_one_work+0x2d8/0x504 kernel/workqueue.c:2289
worker_thread+0x340/0x610 kernel/workqueue.c:2436
kthread+0x12c/0x158 kernel/kthread.c:376
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860
Code: 91011400 aa0803e1 a90027ea 94373093 (d4210000)
Fixes: c12b395a46 ("gre: Support GRE over IPv6")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221024020124.3756833-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The parameter 'msg' has never been used by __sock_cmsg_send, so we can remove it
safely.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the receiver process and the BH runs on different cores,
udp_rmem_release() experience a cache miss while accessing sk_rcvbuf,
as the latter shares the same cacheline with sk_forward_alloc, written
by the BH.
With this patch, UDP tracks the rcvbuf value and its update via custom
SOL_SOCKET socket options, and copies the forward memory threshold value
used by udp_rmem_release() in a different cacheline, already accessed by
the above function and uncontended.
Since the UDP socket init operation grown a bit, factor out the common
code between v4 and v6 in a shared helper.
Overall the above give a 10% peek throughput increase under UDP flood.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can reuse the unlock label above and need not repeat the same code.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The last user of inet6_destroy_sock() is its wrapper inet6_cleanup_sock().
Let's rename inet6_destroy_sock() to inet6_cleanup_sock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit d38afeec26 ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.
DCCP sets its own sk->sk_destruct() in the dccp_init_sock(), and
DCCPv6 socket shares it by calling the same init function via
dccp_v6_init_sock().
To call inet6_sock_destruct() from DCCPv6 sk->sk_destruct(), we
export it and set dccp_v6_sk_destruct() in the init function.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit d38afeec26 ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.
Now we can remove unnecessary inet6_destroy_sock() calls in
sk->sk_prot->destroy().
DCCP and SCTP have their own sk->sk_destruct() function, so we
change them separately in the following patches.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable err is being assigned a value that is not read, the assignment
is redundant and so is the variable. Remove it.
Cleans up clang scan warning:
net/ipv6/esp6_offload.c:64:7: warning: Although the value stored to 'err'
is used in the enclosing expression, the value is never actually read
from 'err' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When using GSO it can happen that the wrong seq_hi is used for the last
packets before the wrap around. This can lead to double usage of a
sequence number. To avoid this, we should serialize this last GSO
packet.
Fixes: d7dbefc45c ("xfrm: Add xfrm_replay_overflow functions for offloading")
Co-developed-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Christian Langrock <christian.langrock@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Currently netfilter's rpfilter and fib modules implicitely initialise
->flowic_uid with 0. This is normally the root UID. However, this isn't
the case in user namespaces, where user ID 0 is mapped to a different
kernel UID. By initialising ->flowic_uid with sock_net_uid(), we get
the root UID of the user namespace, thus keeping the same behaviour
whether or not we're running in a user namepspace.
Note, this is similar to commit 8bcfd0925e ("ipv4: add missing
initialization for flowi4_uid"), which fixed the rp_filter sysctl.
Fixes: 622ec2c9d5 ("net: core: add UID to flows, rules, and routes")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When we call connect() for a UDP socket in a reuseport group, we have
to update sk->sk_reuseport_cb->has_conns to 1. Otherwise, the kernel
could select a unconnected socket wrongly for packets sent to the
connected socket.
However, the current way to set has_conns is illegal and possible to
trigger that problem. reuseport_has_conns() changes has_conns under
rcu_read_lock(), which upgrades the RCU reader to the updater. Then,
it must do the update under the updater's lock, reuseport_lock, but
it doesn't for now.
For this reason, there is a race below where we fail to set has_conns
resulting in the wrong socket selection. To avoid the race, let's split
the reader and updater with proper locking.
cpu1 cpu2
+----+ +----+
__ip[46]_datagram_connect() reuseport_grow()
. .
|- reuseport_has_conns(sk, true) |- more_reuse = __reuseport_alloc(more_socks_size)
| . |
| |- rcu_read_lock()
| |- reuse = rcu_dereference(sk->sk_reuseport_cb)
| |
| | | /* reuse->has_conns == 0 here */
| | |- more_reuse->has_conns = reuse->has_conns
| |- reuse->has_conns = 1 | /* more_reuse->has_conns SHOULD BE 1 HERE */
| | |
| | |- rcu_assign_pointer(reuse->socks[i]->sk_reuseport_cb,
| | | more_reuse)
| `- rcu_read_unlock() `- kfree_rcu(reuse, rcu)
|
|- sk->sk_state = TCP_ESTABLISHED
Note the likely(reuse) in reuseport_has_conns_set() is always true,
but we put the test there for ease of review. [0]
For the record, usually, sk_reuseport_cb is changed under lock_sock().
The only exception is reuseport_grow() & TCP reqsk migration case.
1) shutdown() TCP listener, which is moved into the latter part of
reuse->socks[] to migrate reqsk.
2) New listen() overflows reuse->socks[] and call reuseport_grow().
3) reuse->max_socks overflows u16 with the new listener.
4) reuseport_grow() pops the old shutdown()ed listener from the array
and update its sk->sk_reuseport_cb as NULL without lock_sock().
shutdown()ed TCP sk->sk_reuseport_cb can be changed without lock_sock(),
but, reuseport_has_conns_set() is called only for UDP under lock_sock(),
so likely(reuse) never be false in reuseport_has_conns_set().
[0]: https://lore.kernel.org/netdev/CANn89iLja=eQHbsM_Ta2sQF0tOGU8vAGrh_izRuuHjuO1ouUag@mail.gmail.com/
Fixes: acdcecc612 ("udp: correct reuseport selection with connected sockets")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20221014182625.89913-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=M+mV
-----END PGP SIGNATURE-----
Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
