Commit Graph

1102 Commits

Author SHA1 Message Date
Nathan Chancellor
3597fd5f92 kbuild: Add CONFIG_PAHOLE_VERSION
commit 613fe16923 upstream.

There are a few different places where pahole's version is turned into a
three digit form with the exact same command. Move this command into
scripts/pahole-version.sh to reduce the amount of duplication across the
tree.

Create CONFIG_PAHOLE_VERSION so the version code can be used in Kconfig
to enable and disable configuration options based on the pahole version,
which is already done in a couple of places.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220201205624.652313-3-nathan@kernel.org
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-25 12:06:45 +01:00
Alexandre Belloni
6a4ea16a67 init/Kconfig: fix CC_HAS_ASM_GOTO_TIED_OUTPUT test with dash
[ Upstream commit 534bd70374 ]

When using dash as /bin/sh, the CC_HAS_ASM_GOTO_TIED_OUTPUT test fails
with a syntax error which is not the one we are looking for:

<stdin>: In function ‘foo’:
<stdin>:1:29: warning: missing terminating " character
<stdin>:1:29: error: missing terminating " character
<stdin>:2:5: error: expected ‘:’ before ‘+’ token
<stdin>:2:7: warning: missing terminating " character
<stdin>:2:7: error: missing terminating " character
<stdin>:2:5: error: expected declaration or statement at end of input

Removing '\n' solves this.

Fixes: 1aa0e8b144 ("Kconfig: Add option for asm goto w/ tied outputs to workaround clang-13 bug")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-02 17:41:08 +01:00
Sean Christopherson
64639d1118 Kconfig: Add option for asm goto w/ tied outputs to workaround clang-13 bug
commit 1aa0e8b144 upstream.

Add a config option to guard (future) usage of asm_volatile_goto() that
includes "tied outputs", i.e. "+" constraints that specify both an input
and output parameter.  clang-13 has a bug[1] that causes compilation of
such inline asm to fail, and KVM wants to use a "+m" constraint to
implement a uaccess form of CMPXCHG[2].  E.g. the test code fails with

  <stdin>:1:29: error: invalid operand in inline asm: '.long (${1:l}) - .'
  int foo(int *x) { asm goto (".long (%l[bar]) - .\n": "+m"(*x) ::: bar); return *x; bar: return 0; }
                            ^
  <stdin>:1:29: error: unknown token in expression
  <inline asm>:1:9: note: instantiated into assembly here
          .long () - .
                 ^
  2 errors generated.

on clang-13, but passes on gcc (with appropriate asm goto support).  The
bug is fixed in clang-14, but won't be backported to clang-13 as the
changes are too invasive/risky.

gcc also had a similar bug[3], fixed in gcc-11, where gcc failed to
account for its behavior of assigning two numbers to tied outputs (one
for input, one for output) when evaluating symbolic references.

[1] https://github.com/ClangBuiltLinux/linux/issues/1512
[2] https://lore.kernel.org/all/YfMruK8%2F1izZ2VHS@google.com
[3] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98096

Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220202004945.2540433-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09 10:23:26 +02:00
Marco Elver
b339ec9c22 kbuild: Only default to -Werror if COMPILE_TEST
The cross-product of the kernel's supported toolchains, architectures,
and configuration options is large. So large, that it's generally
accepted to be infeasible to enumerate and build+test them all
(many compile-testers rely on randomly generated configs).

Without the possibility to enumerate all possible combinations of
toolchains, architectures, and configuration options, it is inevitable
that compiler warnings in this space exist.

With -Werror, this means that an innumerable set of kernels are now
broken, yet had been perfectly usable before (confused compilers, code
with warnings unused, or luck).

Distributors will necessarily pick a point in the toolchain X arch X
config space, and if unlucky, will have a broken build. Granted, those
will likely disable CONFIG_WERROR and move on.

The kernel's default configuration is unlikely to be suitable for all
users, but it's inappropriate to force many users to set CONFIG_WERROR=n.

This also holds for CI systems which are focused on runtime testing,
where the odd warning in some subsystem will disrupt testing of the rest
of the kernel. Many of those runtime-focused CI systems run tests or
fuzz the kernel using runtime debugging tools. Runtime testing of
different subsystems can proceed in parallel, and potentially uncover
serious bugs; halting runtime testing of the entire kernel because of
the odd warning (now error) in a subsystem or driver is simply
inappropriate.

Therefore, runtime-focused CI systems will likely choose CONFIG_WERROR=n
as well.

The appropriate usecase for -Werror is therefore compile-test focused
builds (often done by developers or CI systems).

Reflect this in the Kconfig option by making the default value of WERROR
match COMPILE_TEST.

Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviwed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-07 18:47:04 -07:00
Linus Torvalds
3fe617ccaf Enable '-Werror' by default for all kernel builds
... but make it a config option so that broken environments can disable
it when required.

We really should always have a clean build, and will disable specific
over-eager warnings as required, if we can't fix them.  But while I
fairly religiously enforce that in my own tree, it doesn't get enforced
by various build robots that don't necessarily report warnings.

So this just makes '-Werror' a default compiler flag, but allows people
to disable it for their configuration if they have some particular
issues.

Occasionally, new compiler versions end up enabling new warnings, and it
can take a while before we have them fixed (or the warnings disabled if
that is what it takes), so the config option allows for that situation.

Hopefully this will mean that I get fewer pull requests that have new
warnings that were not noticed by various automation we have in place.

Knock wood.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-05 11:24:05 -07:00
Linus Torvalds
df43d90382 printk changes for 5.15
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmEt+hwACgkQUqAMR0iA
 lPLppBAAiyrUNVmqqtdww+IJajEs1uD/4FqPsysHRwroHBFymJeQG1XCwUpDZ7jj
 6gXT0chxyjQE18gT/W9nf+PSmA9XvIVA1WSR+WCECTNW3YoZXqtgwiHfgnitXYku
 HlmoZLthYeuoXWw2wn+hVLfTRh6VcPHYEaC21jXrs6B1pOXHbvjJ5eTLHlX9oCfL
 UKSK+jFTHAJcn/GskRzviBe0Hpe8fqnkRol2XX13ltxqtQ73MjaGNu7imEH6/Pa7
 /MHXWtuWJtOvuYz17aztQP4Qwh1xy+kakMy3aHucdlxRBTP4PTzzTuQI3L/RYi6l
 +ttD7OHdRwqFAauBLY3bq3uJjYb5v/64ofd8DNnT2CJvtznY8wrPbTdFoSdPcL2Q
 69/opRWHcUwbU/Gt4WLtyQf3Mk0vepgMbbVg1B5SSy55atRZaXMrA2QJ/JeawZTB
 KK6D/mE7ccze/YFzsySunCUVKCm0veoNxEAcakCCZKXSbsvd1MYcIRC0e+2cv6e5
 2NEH7gL4dD+5tqu5nzvIuKDn3NrDQpbi28iUBoFbkxRgcVyvHJ9AGSa62wtb5h3D
 OgkqQMdVKBbjYNeUodPlQPzmXZDasytavyd0/BC/KENOcBvU/8gW++2UZTfsh/1A
 dLjgwFBdyJncQcCS9Abn20/EKntbIMEX8NLa97XWkA3fuzMKtak=
 =yEVq
 -----END PGP SIGNATURE-----

Merge tag 'printk-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux

Pull printk updates from Petr Mladek:

 - Optionally, provide an index of possible printk messages via
   <debugfs>/printk/index/. It can be used when monitoring important
   kernel messages on a farm of various hosts. The monitor has to be
   updated when some messages has changed or are not longer available by
   a newly deployed kernel.

 - Add printk.console_no_auto_verbose boot parameter. It allows to
   generate crash dump even with slow consoles in a reasonable time
   frame.

 - Remove printk_safe buffers. The messages are always stored directly
   to the main logbuffer, even in NMI or recursive context. Also it
   allows to serialize syslog operations by a mutex instead of a spin
   lock.

 - Misc clean up and build fixes.

* tag 'printk-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk/index: Fix -Wunused-function warning
  lib/nmi_backtrace: Serialize even messages about idle CPUs
  printk: Add printk.console_no_auto_verbose boot parameter
  printk: Remove console_silent()
  lib/test_scanf: Handle n_bits == 0 in random tests
  printk: syslog: close window between wait and read
  printk: convert @syslog_lock to mutex
  printk: remove NMI tracking
  printk: remove safe buffers
  printk: track/limit recursion
  lib/nmi_backtrace: explicitly serialize banner and regs
  printk: Move the printk() kerneldoc comment to its new home
  printk/index: Fix warning about missing prototypes
  MIPS/asm/printk: Fix build failure caused by printk
  printk: index: Add indexing support to dev_printk
  printk: Userspace format indexing support
  printk: Rework parse_prefix into printk_parse_prefix
  printk: Straighten out log_flags into printk_info_flags
  string_helpers: Escape double quotes in escape_special
  printk/console: Check consistent sequence number when handling race in console_unlock()
2021-09-01 18:41:13 -07:00
Petr Mladek
c985aafb60 Merge branch 'rework/printk_safe-removal' into for-linus 2021-08-30 16:36:10 +02:00
John Ogness
85e3e7fbbb printk: remove NMI tracking
All NMI contexts are handled the same as the safe context: store the
message and defer printing. There is no need to have special NMI
context tracking for this. Using in_nmi() is enough.

There are several parts of the kernel that are manually calling into
the printk NMI context tracking in order to cause general printk
deferred printing:

    arch/arm/kernel/smp.c
    arch/powerpc/kexec/crash.c
    kernel/trace/trace.c

For arm/kernel/smp.c and powerpc/kexec/crash.c, provide a new
function pair printk_deferred_enter/exit that explicitly achieves the
same objective.

For ftrace, remove the printk context manipulation completely. It was
added in commit 03fc7f9c99 ("printk/nmi: Prevent deadlock when
accessing the main log buffer in NMI"). The purpose was to enforce
storing messages directly into the ring buffer even in NMI context.
It really should have only modified the behavior in NMI context.
There is no need for a special behavior any longer. All messages are
always stored directly now. The console deferring is handled
transparently in vprintk().

Signed-off-by: John Ogness <john.ogness@linutronix.de>
[pmladek@suse.com: Remove special handling in ftrace.c completely.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210715193359.25946-5-john.ogness@linutronix.de
2021-07-26 15:09:44 +02:00
Chris Down
3370155737 printk: Userspace format indexing support
We have a number of systems industry-wide that have a subset of their
functionality that works as follows:

1. Receive a message from local kmsg, serial console, or netconsole;
2. Apply a set of rules to classify the message;
3. Do something based on this classification (like scheduling a
   remediation for the machine), rinse, and repeat.

As a couple of examples of places we have this implemented just inside
Facebook, although this isn't a Facebook-specific problem, we have this
inside our netconsole processing (for alarm classification), and as part
of our machine health checking. We use these messages to determine
fairly important metrics around production health, and it's important
that we get them right.

While for some kinds of issues we have counters, tracepoints, or metrics
with a stable interface which can reliably indicate the issue, in order
to react to production issues quickly we need to work with the interface
which most kernel developers naturally use when developing: printk.

Most production issues come from unexpected phenomena, and as such
usually the code in question doesn't have easily usable tracepoints or
other counters available for the specific problem being mitigated. We
have a number of lines of monitoring defence against problems in
production (host metrics, process metrics, service metrics, etc), and
where it's not feasible to reliably monitor at another level, this kind
of pragmatic netconsole monitoring is essential.

As one would expect, monitoring using printk is rather brittle for a
number of reasons -- most notably that the message might disappear
entirely in a new version of the kernel, or that the message may change
in some way that the regex or other classification methods start to
silently fail.

One factor that makes this even harder is that, under normal operation,
many of these messages are never expected to be hit. For example, there
may be a rare hardware bug which one wants to detect if it was to ever
happen again, but its recurrence is not likely or anticipated. This
precludes using something like checking whether the printk in question
was printed somewhere fleetwide recently to determine whether the
message in question is still present or not, since we don't anticipate
that it should be printed anywhere, but still need to monitor for its
future presence in the long-term.

This class of issue has happened on a number of occasions, causing
unhealthy machines with hardware issues to remain in production for
longer than ideal. As a recent example, some monitoring around
blk_update_request fell out of date and caused semi-broken machines to
remain in production for longer than would be desirable.

Searching through the codebase to find the message is also extremely
fragile, because many of the messages are further constructed beyond
their callsite (eg. btrfs_printk and other module-specific wrappers,
each with their own functionality). Even if they aren't, guessing the
format and formulation of the underlying message based on the aesthetics
of the message emitted is not a recipe for success at scale, and our
previous issues with fleetwide machine health checking demonstrate as
much.

This provides a solution to the issue of silently changed or deleted
printks: we record pointers to all printk format strings known at
compile time into a new .printk_index section, both in vmlinux and
modules. At runtime, this can then be iterated by looking at
<debugfs>/printk/index/<module>, which emits the following format, both
readable by humans and able to be parsed by machines:

    $ head -1 vmlinux; shuf -n 5 vmlinux
    # <level[,flags]> filename:line function "format"
    <5> block/blk-settings.c:661 disk_stack_limits "%s: Warning: Device %s is misaligned\n"
    <4> kernel/trace/trace.c:8296 trace_create_file "Could not create tracefs '%s' entry\n"
    <6> arch/x86/kernel/hpet.c:144 _hpet_print_config "hpet: %s(%d):\n"
    <6> init/do_mounts.c:605 prepare_namespace "Waiting for root device %s...\n"
    <6> drivers/acpi/osl.c:1410 acpi_no_auto_serialize_setup "ACPI: auto-serialization disabled\n"

This mitigates the majority of cases where we have a highly-specific
printk which we want to match on, as we can now enumerate and check
whether the format changed or the printk callsite disappeared entirely
in userspace. This allows us to catch changes to printks we monitor
earlier and decide what to do about it before it becomes problematic.

There is no additional runtime cost for printk callers or printk itself,
and the assembly generated is exactly the same.

Signed-off-by: Chris Down <chris@chrisdown.name>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jessica Yu <jeyu@kernel.org> # for module.{c,h}
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/e42070983637ac5e384f17fbdbe86d19c7b212a5.1623775748.git.chris@chrisdown.name
2021-07-19 11:57:48 +02:00
Linus Torvalds
ae14c63a9f Revert "mm/slub: use stackdepot to save stack trace in objects"
This reverts commit 788691464c.

It's not clear why, but it causes unexplained problems in entirely
unrelated xfs code.  The most likely explanation is some slab
corruption, possibly triggered due to CONFIG_SLUB_DEBUG_ON.  See [1].

It ends up having a few other problems too, like build errors on
arch/arc, and Geert reporting it using much more memory on m68k [3] (it
probably does so elsewhere too, but it is probably just more noticeable
on m68k).

The architecture issues (both build and memory use) are likely just
because this change effectively force-enabled STACKDEPOT (along with a
very bad default value for the stackdepot hash size).  But together with
the xfs issue, this all smells like "this commit was not ready" to me.

Link: https://lore.kernel.org/linux-xfs/YPE3l82acwgI2OiV@infradead.org/ [1]
Link: https://lore.kernel.org/lkml/202107150600.LkGNb4Vb-lkp@intel.com/ [2]
Link: https://lore.kernel.org/lkml/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/ [3]
Reported-by: Christoph Hellwig <hch@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-17 13:27:00 -07:00
Oliver Glitta
788691464c mm/slub: use stackdepot to save stack trace in objects
Many stack traces are similar so there are many similar arrays.
Stackdepot saves each unique stack only once.

Replace field addrs in struct track with depot_stack_handle_t handle.  Use
stackdepot to save stack trace.

The benefits are smaller memory overhead and possibility to aggregate
per-cache statistics in the future using the stackdepot handle instead of
matching stacks manually.

[rdunlap@infradead.org: rename save_stack_trace()]
  Link: https://lkml.kernel.org/r/20210513051920.29320-1-rdunlap@infradead.org
[vbabka@suse.cz: fix lockdep splat]
  Link: https://lkml.kernel.org/r/20210516195150.26740-1-vbabka@suse.czLink: https://lkml.kernel.org/r/20210414163434.4376-1-glittao@gmail.com

Signed-off-by: Oliver Glitta <glittao@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-08 11:48:20 -07:00
Linus Torvalds
44b6ed4cfa Clang feature updates for v5.14-rc1
- Add CC_HAS_NO_PROFILE_FN_ATTR in preparation for PGO support in
   the face of the noinstr attribute, paving the way for PGO and fixing
   GCOV. (Nick Desaulniers)
 
 - x86_64 LTO coverage is expanded to 32-bit x86. (Nathan Chancellor)
 
 - Small fixes to CFI. (Mark Rutland, Nathan Chancellor)
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmDbiFYWHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJtd7D/9O7KE4M1O38TumCK9e6djPETb6
 CHF5dpxnV5w1ZWgBysy8+nZ0ORWAm05rgF65K4ROBUhdrygEElIIkI88a/F9pDyE
 99E0WTgQi4x4pFFJHF1Sj2G6YoCqrvFpZ45fMd8xk3y/sykhKO4k2A2ux1cHH1zh
 yYkzASDdukpr/xfcu1JCSFyjRU3Yk9aRzpg0PtrcMSDDuCYqg+oL91rxtkdXc6wS
 FbVSkUiFQq+RZk9h6DaiVDen/rPvo4rqgQYbdVM8s94gMaHA4MiMiQE6cKkClfdp
 zacqqh9Cjaeyievz6jkVSqFtmO7e231E6kAWg/ebqVjs6WIcS3NVEfGGjCEaCuMq
 qKy/m30YzpJ0jLbbQ9L/Cm3xu5ZqfSaQBQmBjNcBMkeMQN8o/P6qt6UASZfBXXCs
 ++MUpNQEJqxCyZdwu/6qlzfKUiGo5AJo7RRes5/shqTXQLLBni4j7vtkSYZsfPYr
 b1nHk6TnyY7PjcMekG/IWU89pMchEDswGxSGlrqoop1kT3zumzJeZdPAB8sdNjI8
 aBb120qLIC8n9ybZZsNliNtK4IHerBOxDDJB40EEbtBCPowZDEUt/z/DQrKjbOv4
 viOulu1D8f/MDXVBx2aTXGpMo/jQf7bKRITtpzt1eFWSTZzqCqWLfGRq2myjz0t5
 f2x1rpJLC2oV4KNCYw==
 =IhVh
 -----END PGP SIGNATURE-----

Merge tag 'clang-features-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull clang feature updates from Kees Cook:

 - Add CC_HAS_NO_PROFILE_FN_ATTR in preparation for PGO support in the
   face of the noinstr attribute, paving the way for PGO and fixing
   GCOV. (Nick Desaulniers)

 - x86_64 LTO coverage is expanded to 32-bit x86. (Nathan Chancellor)

 - Small fixes to CFI. (Mark Rutland, Nathan Chancellor)

* tag 'clang-features-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  qemu_fw_cfg: Make fw_cfg_rev_attr a proper kobj_attribute
  Kconfig: Introduce ARCH_WANTS_NO_INSTR and CC_HAS_NO_PROFILE_FN_ATTR
  compiler_attributes.h: cleanups for GCC 4.9+
  compiler_attributes.h: define __no_profile, add to noinstr
  x86, lto: Enable Clang LTO for 32-bit as well
  CFI: Move function_nocfi() into compiler.h
  MAINTAINERS: Add Clang CFI section
2021-06-30 14:33:25 -07:00
Nick Desaulniers
51c2ee6d12 Kconfig: Introduce ARCH_WANTS_NO_INSTR and CC_HAS_NO_PROFILE_FN_ATTR
We don't want compiler instrumentation to touch noinstr functions,
which are annotated with the no_profile_instrument_function function
attribute. Add a Kconfig test for this and make GCOV depend on it, and
in the future, PGO.

If an architecture is using noinstr, it should denote that via this
Kconfig value. That makes Kconfigs that depend on noinstr able to express
dependencies in an architecturally agnostic way.

Cc: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/lkml/YMTn9yjuemKFLbws@hirez.programming.kicks-ass.net/
Link: https://lore.kernel.org/lkml/YMcssV%2Fn5IBGv4f0@hirez.programming.kicks-ass.net/
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210621231822.2848305-4-ndesaulniers@google.com
2021-06-22 11:07:18 -07:00
David S. Miller
df6f823703 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2021-05-11

The following pull-request contains BPF updates for your *net* tree.

We've added 13 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 817 insertions(+), 382 deletions(-).

The main changes are:

1) Fix multiple ringbuf bugs in particular to prevent writable mmap of
   read-only pages, from Andrii Nakryiko & Thadeu Lima de Souza Cascardo.

2) Fix verifier alu32 known-const subregister bound tracking for bitwise
   operations and/or/xor, from Daniel Borkmann.

3) Reject trampoline attachment for functions with variable arguments,
   and also add a deny list of other forbidden functions, from Jiri Olsa.

4) Fix nested bpf_bprintf_prepare() calls used by various helpers by
   switching to per-CPU buffers, from Florent Revest.

5) Fix kernel compilation with BTF debug info on ppc64 due to pahole
   missing TCP-CC functions like cubictcp_init, from Martin KaFai Lau.

6) Add a kconfig entry to provide an option to disallow unprivileged
   BPF by default, from Daniel Borkmann.

7) Fix libbpf compilation for older libelf when GELF_ST_VISIBILITY()
   macro is not available, from Arnaldo Carvalho de Melo.

8) Migrate test_tc_redirect to test_progs framework as prep work
   for upcoming skb_change_head() fix & selftest, from Jussi Maki.

9) Fix a libbpf segfault in add_dummy_ksym_var() if BTF is not
   present, from Ian Rogers.

10) Fix tx_only micro-benchmark in xdpsock BPF sample with proper frame
    size, from Magnus Karlsson.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-11 16:05:56 -07:00
Daniel Borkmann
b24abcff91 bpf, kconfig: Add consolidated menu entry for bpf with core options
Right now, all core BPF related options are scattered in different Kconfig
locations mainly due to historic reasons. Moving forward, lets add a proper
subsystem entry under ...

  General setup  --->
    BPF subsystem  --->

... in order to have all knobs in a single location and thus ease BPF related
configuration. Networking related bits such as sockmap are out of scope for
the general setup and therefore better suited to remain in net/Kconfig.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/f23f58765a4d59244ebd8037da7b6a6b2fb58446.1620765074.git.daniel@iogearbox.net
2021-05-11 13:56:16 -07:00
Linus Torvalds
a48b0872e6 Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton:
 "This is everything else from -mm for this merge window.

  90 patches.

  Subsystems affected by this patch series: mm (cleanups and slub),
  alpha, procfs, sysctl, misc, core-kernel, bitmap, lib, compat,
  checkpatch, epoll, isofs, nilfs2, hpfs, exit, fork, kexec, gcov,
  panic, delayacct, gdb, resource, selftests, async, initramfs, ipc,
  drivers/char, and spelling"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (90 commits)
  mm: fix typos in comments
  mm: fix typos in comments
  treewide: remove editor modelines and cruft
  ipc/sem.c: spelling fix
  fs: fat: fix spelling typo of values
  kernel/sys.c: fix typo
  kernel/up.c: fix typo
  kernel/user_namespace.c: fix typos
  kernel/umh.c: fix some spelling mistakes
  include/linux/pgtable.h: few spelling fixes
  mm/slab.c: fix spelling mistake "disired" -> "desired"
  scripts/spelling.txt: add "overflw"
  scripts/spelling.txt: Add "diabled" typo
  scripts/spelling.txt: add "overlfow"
  arm: print alloc free paths for address in registers
  mm/vmalloc: remove vwrite()
  mm: remove xlate_dev_kmem_ptr()
  drivers/char: remove /dev/kmem for good
  mm: fix some typos and code style problems
  ipc/sem.c: mundane typo fixes
  ...
2021-05-07 00:34:51 -07:00
Rasmus Villemoes
17652f4240 modules: add CONFIG_MODPROBE_PATH
Allow the developer to specifiy the initial value of the modprobe_path[]
string.  This can be used to set it to the empty string initially, thus
effectively disabling request_module() during early boot until userspace
writes a new value via the /proc/sys/kernel/modprobe interface.  [1]

When building a custom kernel (often for an embedded target), it's normal
to build everything into the kernel that is needed for booting, and indeed
the initramfs often contains no modules at all, so every such
request_module() done before userspace init has mounted the real rootfs is
a waste of time.

This is particularly useful when combined with the previous patch, which
made the initramfs unpacking asynchronous - for that to work, it had to
make any usermodehelper call wait for the unpacking to finish before
attempting to invoke the userspace helper.  By eliminating all such
(known-to-be-futile) calls of usermodehelper, the initramfs unpacking and
the {device,late}_initcalls can proceed in parallel for much longer.

For a relatively slow ppc board I'm working on, the two patches combined
lead to 0.2s faster boot - but more importantly, the fact that the
initramfs unpacking proceeds completely in the background while devices
get probed means I get to handle the gpio watchdog in time without getting
reset.

[1] __request_module() already has an early -ENOENT return when
modprobe_path is the empty string.

Link: https://lkml.kernel.org/r/20210313212528.2956377-3-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-07 00:26:33 -07:00
Linus Torvalds
8404c9fbc8 Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
 "The remainder of the main mm/ queue.

  143 patches.

  Subsystems affected by this patch series (all mm): pagecache, hugetlb,
  userfaultfd, vmscan, compaction, migration, cma, ksm, vmstat, mmap,
  kconfig, util, memory-hotplug, zswap, zsmalloc, highmem, cleanups, and
  kfence"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (143 commits)
  kfence: use power-efficient work queue to run delayed work
  kfence: maximize allocation wait timeout duration
  kfence: await for allocation using wait_event
  kfence: zero guard page after out-of-bounds access
  mm/process_vm_access.c: remove duplicate include
  mm/mempool: minor coding style tweaks
  mm/highmem.c: fix coding style issue
  btrfs: use memzero_page() instead of open coded kmap pattern
  iov_iter: lift memzero_page() to highmem.h
  mm/zsmalloc: use BUG_ON instead of if condition followed by BUG.
  mm/zswap.c: switch from strlcpy to strscpy
  arm64/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
  x86/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
  mm,memory_hotplug: add kernel boot option to enable memmap_on_memory
  acpi,memhotplug: enable MHP_MEMMAP_ON_MEMORY when supported
  mm,memory_hotplug: allocate memmap from the added memory range
  mm,memory_hotplug: factor out adjusting present pages into adjust_present_page_count()
  mm,memory_hotplug: relax fully spanned sections check
  drivers/base/memory: introduce memory_block_{online,offline}
  mm/memory_hotplug: remove broken locking of zone PCP structures during hot remove
  ...
2021-05-05 13:50:15 -07:00
Axel Rasmussen
7677f7fd8b userfaultfd: add minor fault registration mode
Patch series "userfaultfd: add minor fault handling", v9.

Overview
========

This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS.
When enabled (via the UFFDIO_API ioctl), this feature means that any
hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also*
get events for "minor" faults.  By "minor" fault, I mean the following
situation:

Let there exist two mappings (i.e., VMAs) to the same page(s) (shared
memory).  One of the mappings is registered with userfaultfd (in minor
mode), and the other is not.  Via the non-UFFD mapping, the underlying
pages have already been allocated & filled with some contents.  The UFFD
mapping has not yet been faulted in; when it is touched for the first
time, this results in what I'm calling a "minor" fault.  As a concrete
example, when working with hugetlbfs, we have huge_pte_none(), but
find_lock_page() finds an existing page.

We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE.  The idea
is, userspace resolves the fault by either a) doing nothing if the
contents are already correct, or b) updating the underlying contents using
the second, non-UFFD mapping (via memcpy/memset or similar, or something
fancier like RDMA, or etc...).  In either case, userspace issues
UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are
correct, carry on setting up the mapping".

Use Case
========

Consider the use case of VM live migration (e.g. under QEMU/KVM):

1. While a VM is still running, we copy the contents of its memory to a
   target machine. The pages are populated on the target by writing to the
   non-UFFD mapping, using the setup described above. The VM is still running
   (and therefore its memory is likely changing), so this may be repeated
   several times, until we decide the target is "up to date enough".

2. We pause the VM on the source, and start executing on the target machine.
   During this gap, the VM's user(s) will *see* a pause, so it is desirable to
   minimize this window.

3. Between the last time any page was copied from the source to the target, and
   when the VM was paused, the contents of that page may have changed - and
   therefore the copy we have on the target machine is out of date. Although we
   can keep track of which pages are out of date, for VMs with large amounts of
   memory, it is "slow" to transfer this information to the target machine. We
   want to resume execution before such a transfer would complete.

4. So, the guest begins executing on the target machine. The first time it
   touches its memory (via the UFFD-registered mapping), userspace wants to
   intercept this fault. Userspace checks whether or not the page is up to date,
   and if not, copies the updated page from the source machine, via the non-UFFD
   mapping. Finally, whether a copy was performed or not, userspace issues a
   UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents
   are correct, carry on setting up the mapping".

We don't have to do all of the final updates on-demand. The userfaultfd manager
can, in the background, also copy over updated pages once it receives the map of
which pages are up-to-date or not.

Interaction with Existing APIs
==============================

Because this is a feature, a registered VMA could potentially receive both
missing and minor faults.  I spent some time thinking through how the
existing API interacts with the new feature:

UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not
allocate a new page.  If UFFDIO_CONTINUE is used on a non-minor fault:

- For non-shared memory or shmem, -EINVAL is returned.
- For hugetlb, -EFAULT is returned.

UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults.
Without modifications, the existing codepath assumes a new page needs to
be allocated.  This is okay, since userspace must have a second
non-UFFD-registered mapping anyway, thus there isn't much reason to want
to use these in any case (just memcpy or memset or similar).

- If UFFDIO_COPY is used on a minor fault, -EEXIST is returned.
- If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL
  in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case).
- UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns
  -ENOENT in that case (regardless of the kind of fault).

Future Work
===========

This series only supports hugetlbfs.  I have a second series in flight to
support shmem as well, extending the functionality.  This series is more
mature than the shmem support at this point, and the functionality works
fully on hugetlbfs, so this series can be merged first and then shmem
support will follow.

This patch (of 6):

This feature allows userspace to intercept "minor" faults.  By "minor"
faults, I mean the following situation:

Let there exist two mappings (i.e., VMAs) to the same page(s).  One of the
mappings is registered with userfaultfd (in minor mode), and the other is
not.  Via the non-UFFD mapping, the underlying pages have already been
allocated & filled with some contents.  The UFFD mapping has not yet been
faulted in; when it is touched for the first time, this results in what
I'm calling a "minor" fault.  As a concrete example, when working with
hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing
page.

This commit adds the new registration mode, and sets the relevant flag on
the VMAs being registered.  In the hugetlb fault path, if we find that we
have huge_pte_none(), but find_lock_page() does indeed find an existing
page, then we have a "minor" fault, and if the VMA has the userfaultfd
registration flag, we call into userfaultfd to handle it.

This is implemented as a new registration mode, instead of an API feature.
This is because the alternative implementation has significant drawbacks
[1].

However, doing it this was requires we allocate a VM_* flag for the new
registration mode.  On 32-bit systems, there are no unused bits, so this
feature is only supported on architectures with
CONFIG_ARCH_USES_HIGH_VMA_FLAGS.  When attempting to register a VMA in
MINOR mode on 32-bit architectures, we return -EINVAL.

[1] https://lore.kernel.org/patchwork/patch/1380226/

[peterx@redhat.com: fix minor fault page leak]
  Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com

Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 11:27:22 -07:00
Linus Torvalds
e6f0bf09f0 integrity-v5.13
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEEjSMCCC7+cjo3nszSa3kkZrA+cVoFAmCIuMgUHHpvaGFyQGxp
 bnV4LmlibS5jb20ACgkQa3kkZrA+cVqCew//SHwZ3LuqZUyqX1lCeW0eUsJQmf9P
 Rc++pK5+cigaYwg/LpLXBtIthOO91KJ+p4UrXIttlz6wRWqH5Enm/nQk3ngIIrWJ
 g4HsU4LoXeE5V1QZgDdUWM+ViaNvZuzT8enaUt4VvelHTRMoAgeTu7/amjx01t9L
 R8Qhmg2tBI5ehRgocNfEApNfaDyOcJhR14wAnGFhQH1pH2o0e+O+L5E6ke3Z2N0D
 oa9LBkA2wZFlTXkYHAYBdZjPW0BXX55brIusLHhrvFC16Ad9IVwcxRvRwYy4v2IK
 p8kO7EwGO4IkqsuL6FApgbW8/dTZXo3pD8YmplXhQdvAd9L/LshYhDePX7UsEp+O
 CL3rFvNFzZKC5qTx0UXLqjcktosOLTTFkAzRMg5taTljbTWBp9ziI8X0nTgoThLH
 fTs41Ol5v5veiq8JbZ1VixCoDJVOWtED/FuSZD41OyXJb7yGNpTnmvP6QJNIa1Yo
 vWsxSWmEX62xT85CzYLBR1Ow5+9t9+IjoCRt0pu0SRSps4gYcg1BjS+gIFnuCtB/
 B9Ysh+rHo9ne9iojFd9TrEYQSAXebVEYSOjqPWV3E7gd0EXuF+JY0akj8JBduHt3
 mfogxVtJdaHDjHtpHoHhBTpHG8l/E2n/47eFDmCiTsBGdL54R4jJSkOu8QmWBgzz
 HVNX+f86SJ2haUw=
 =gkFF
 -----END PGP SIGNATURE-----

Merge tag 'integrity-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity

Pull IMA updates from Mimi Zohar:
 "In addition to loading the kernel module signing key onto the builtin
  keyring, load it onto the IMA keyring as well.

  Also six trivial changes and bug fixes"

* tag 'integrity-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: ensure IMA_APPRAISE_MODSIG has necessary dependencies
  ima: Fix fall-through warnings for Clang
  integrity: Add declarations to init_once void arguments.
  ima: Fix function name error in comment.
  ima: enable loading of build time generated key on .ima keyring
  ima: enable signing of modules with build time generated key
  keys: cleanup build time module signing keys
  ima: Fix the error code for restoring the PCR value
  ima: without an IMA policy loaded, return quickly
2021-05-01 15:32:18 -07:00
Linus Torvalds
8ca5297e7e Kconfig updates for v5.13
- Change 'option defconfig' to the environment variable
    KCONFIG_DEFCONFIG_LIST
 
  - Refactor tinyconfig without using allnoconfig_y
 
  - Remove 'option allnoconfig_y' syntax
 
  - Change 'option modules' to 'modules'
 
  - Do not use /boot/config-* etc. as base config for cross-compilation
 
  - Fix a search bug in nconf
 
  - Various code cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmCKTy8VHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGLFkQAJFaFORoOIGvkErYkTNv64LpDZsB
 ck7xV6gAUB0iSfv6x5mKfbZRWllc0GMr0dNY2hKs0iazvrvm3OKheLNR6zQ7OwI4
 aPd46lD7Dpvl09iNJcAAwVkwuqAcISKKk8wBhTsdFNx6A+ouPxNPWZHics5SqT14
 jw6YGkI/MJaDx74izRlDKOiBlrpq1gM9pyAud2gHyWfksxu9E2JQ2guao/UpB0I7
 XmCC8HzDdMP637gvA0cMj/+thW0/6ws8ev0bwhHTNFnB1F+N5Aop1urWnwTQKIoy
 WatTUfvhikaZPbJUBxOA21xbmhN4NnBxICXcmsFRLxYIsaZJY1UOk5hDZ1MvptnB
 jnOKUH52yqWeHMvBLqdsxSxktUawg3U85v5ygtYOUUJmuyhkP5nz3095eeFXS/J6
 3KZAnSfRubb2XbfZMG0YUUtVoi782Mv0OvdRbyvON/TsXFP8T1skKUtCaDaXm31Z
 ApjIs1xViuuTXfRqmk7vmjTn0oWIhRahnS49Wl1Ro00JH9VjBJz7N3T+rJ5naY2B
 GOCM2oTWh/qMW5makFCQNFEsaSr5HBsueepRhUoUOQcyJHQFuK/Cb+C4Rv2gp5ao
 3QYp2x49v0c+dkEmkmOW4LwUxjKUe573D3eVLcGnq+4MYouY7XGFWFKfUKYuPgCL
 aqVi/QHKNZpd5Wko
 =+eSh
 -----END PGP SIGNATURE-----

Merge tag 'kconfig-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kconfig updates from Masahiro Yamada:

 - Change 'option defconfig' to the environment variable
   KCONFIG_DEFCONFIG_LIST

 - Refactor tinyconfig without using allnoconfig_y

 - Remove 'option allnoconfig_y' syntax

 - Change 'option modules' to 'modules'

 - Do not use /boot/config-* etc. as base config for cross-compilation

 - Fix a search bug in nconf

 - Various code cleanups

* tag 'kconfig-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  kconfig: refactor .gitignore
  kconfig: highlight xconfig 'comment' lines with '***'
  kconfig: highlight gconfig 'comment' lines with '***'
  kconfig: gconf: remove unused code
  kconfig: remove unused PACKAGE definition
  kconfig: nconf: stop endless search loops
  kconfig: split menu.c out of parser.y
  kconfig: nconf: refactor in print_in_middle()
  kconfig: nconf: remove meaningless wattrset() call from show_menu()
  kconfig: nconf: change set_config_filename() to void function
  kconfig: nconf: refactor attributes setup code
  kconfig: nconf: remove unneeded default for menu prompt
  kconfig: nconf: get rid of (void) casts from wattrset() calls
  kconfig: nconf: fix NORMAL attributes
  kconfig: mconf,nconf: remove unneeded '\0' termination after snprintf()
  kconfig: use /boot/config-* etc. as DEFCONFIG_LIST only for native build
  kconfig: change sym_change_count to a boolean flag
  kconfig: nconf: fix core dump when searching in empty menu
  kconfig: lxdialog: A spello fix and a punctuation added
  kconfig: streamline_config.pl: Couple of typo fixes
  ...
2021-04-29 14:32:00 -07:00
Linus Torvalds
b0030af53a Kbuild updates for v5.13
- Evaluate $(call cc-option,...) etc. only for build targets
 
  - Add CONFIG_VMLINUX_MAP to generate .map file when linking vmlinux
 
  - Remove unnecessary --gcc-toolchains Clang flag because the --prefix
    flag finds the toolchains
 
  - Do not pass Clang's --prefix flag when using the integrated as
 
  - Check the assembler version in Kconfig time
 
  - Add new CONFIG options, AS_VERSION, AS_IS_GNU, AS_IS_LLVM to clean up
    some dependencies in Kconfig
 
  - Fix invalid Module.symvers creation when building only modules without
    vmlinux
 
  - Fix false-positive modpost warnings when CONFIG_TRIM_UNUSED_KSYMS is
    set, but there is no module to build
 
  - Refactor module installation Makefile
 
  - Support zstd for module compression
 
  - Convert alpha and ia64 to use generic shell scripts to generate the
    syscall headers
 
  - Add a new elfnote to indicate if the kernel was built with LTO, which
    will be used by pahole
 
  - Flatten the directory structure under include/config/ so CONFIG options
    and filenames match
 
  - Change the deb source package name from linux-$(KERNELRELEASE) to
    linux-upstream
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmCKOLUVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGdq8P/2z+saxIWGXVWt0ggavR0vimcY4e
 NQIKGu9uZpo/lfoC78UG8HO+XvzvPUrcRuOX+WIVr2GfScgVnweDukexUAY0/2oi
 4UvqhndJ0sjEwRj8mXXJ0O+PED+OtgrqrbhkLq9wHQd/jpSD4XEWXwn1g1XVrTZu
 WbwP6b1G/Rnjp2lz3HKC017rPkmfsCFQB7r+hbJGKhT0rCaceheUuBvGa/XqLknr
 IOyaUAY76u3Gtj6fVY1rk70kQgDMF8+LJPgdSSZ/XPCvbNJQAeop36EeRNfmxGIh
 vQhFJRJeqy+K5MhCpdGtTGYDawlmQVn/f/99SkDw9F04S4ZL2Xnaaqw4L1QDhjTh
 xBlckbPvmq36F4xSqWd5kYF3iwS+LsEJROwZKFLEVDb3zMsRQPEGQM/556QmrBi2
 5KXzwOYEJKuobWr1hQ3PwLumJKTPGLvGEFB3Bq2eG8LrgpOAHPI4ejC2EBu0vCez
 QbskP2lPlMj3MbL5iZg+6ZRlOChZ7RUrSDj6+iTeOcinmXHqQONCL6qy+um4Rfcb
 zUkfwTlqM9d88u6AbO2VvQMOobMjvp4bvmqi/Xv8IiTukLHco4tc8zTuySmZwSyI
 rd3RKYn367qWztX5YyaoGRPVmlMG7ssbRc4fkXiV13vfeZebNfVwlX/CHv9+IWwN
 RVnMhYBhUZR68h6z
 =ti9L
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Evaluate $(call cc-option,...) etc. only for build targets

 - Add CONFIG_VMLINUX_MAP to generate .map file when linking vmlinux

 - Remove unnecessary --gcc-toolchains Clang flag because the --prefix
   flag finds the toolchains

 - Do not pass Clang's --prefix flag when using the integrated as

 - Check the assembler version in Kconfig time

 - Add new CONFIG options, AS_VERSION, AS_IS_GNU, AS_IS_LLVM to clean up
   some dependencies in Kconfig

 - Fix invalid Module.symvers creation when building only modules
   without vmlinux

 - Fix false-positive modpost warnings when CONFIG_TRIM_UNUSED_KSYMS is
   set, but there is no module to build

 - Refactor module installation Makefile

 - Support zstd for module compression

 - Convert alpha and ia64 to use generic shell scripts to generate the
   syscall headers

 - Add a new elfnote to indicate if the kernel was built with LTO, which
   will be used by pahole

 - Flatten the directory structure under include/config/ so CONFIG
   options and filenames match

 - Change the deb source package name from linux-$(KERNELRELEASE) to
   linux-upstream

* tag 'kbuild-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (42 commits)
  kbuild: Add $(KBUILD_HOSTLDFLAGS) to 'has_libelf' test
  kbuild: deb-pkg: change the source package name to linux-upstream
  tools: do not include scripts/Kbuild.include
  kbuild: redo fake deps at include/config/*.h
  kbuild: remove TMPO from try-run
  MAINTAINERS: add pattern for dummy-tools
  kbuild: add an elfnote for whether vmlinux is built with lto
  ia64: syscalls: switch to generic syscallhdr.sh
  ia64: syscalls: switch to generic syscalltbl.sh
  alpha: syscalls: switch to generic syscallhdr.sh
  alpha: syscalls: switch to generic syscalltbl.sh
  sysctl: use min() helper for namecmp()
  kbuild: add support for zstd compressed modules
  kbuild: remove CONFIG_MODULE_COMPRESS
  kbuild: merge scripts/Makefile.modsign to scripts/Makefile.modinst
  kbuild: move module strip/compression code into scripts/Makefile.modinst
  kbuild: refactor scripts/Makefile.modinst
  kbuild: rename extmod-prefix to extmod_prefix
  kbuild: check module name conflict for external modules as well
  kbuild: show the target directory for depmod log
  ...
2021-04-29 14:24:39 -07:00
Linus Torvalds
9d31d23389 Networking changes for 5.13.
Core:
 
  - bpf:
 	- allow bpf programs calling kernel functions (initially to
 	  reuse TCP congestion control implementations)
 	- enable task local storage for tracing programs - remove the
 	  need to store per-task state in hash maps, and allow tracing
 	  programs access to task local storage previously added for
 	  BPF_LSM
 	- add bpf_for_each_map_elem() helper, allowing programs to
 	  walk all map elements in a more robust and easier to verify
 	  fashion
 	- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
 	  redirection
 	- lpm: add support for batched ops in LPM trie
 	- add BTF_KIND_FLOAT support - mostly to allow use of BTF
 	  on s390 which has floats in its headers files
 	- improve BPF syscall documentation and extend the use of kdoc
 	  parsing scripts we already employ for bpf-helpers
 	- libbpf, bpftool: support static linking of BPF ELF files
 	- improve support for encapsulation of L2 packets
 
  - xdp: restructure redirect actions to avoid a runtime lookup,
 	improving performance by 4-8% in microbenchmarks
 
  - xsk: build skb by page (aka generic zerocopy xmit) - improve
 	performance of software AF_XDP path by 33% for devices
 	which don't need headers in the linear skb part (e.g. virtio)
 
  - nexthop: resilient next-hop groups - improve path stability
 	on next-hops group changes (incl. offload for mlxsw)
 
  - ipv6: segment routing: add support for IPv4 decapsulation
 
  - icmp: add support for RFC 8335 extended PROBE messages
 
  - inet: use bigger hash table for IP ID generation
 
  - tcp: deal better with delayed TX completions - make sure we don't
 	give up on fast TCP retransmissions only because driver is
 	slow in reporting that it completed transmitting the original
 
  - tcp: reorder tcp_congestion_ops for better cache locality
 
  - mptcp:
 	- add sockopt support for common TCP options
 	- add support for common TCP msg flags
 	- include multiple address ids in RM_ADDR
 	- add reset option support for resetting one subflow
 
  - udp: GRO L4 improvements - improve 'forward' / 'frag_list'
 	co-existence with UDP tunnel GRO, allowing the first to take
 	place correctly	even for encapsulated UDP traffic
 
  - micro-optimize dev_gro_receive() and flow dissection, avoid
 	retpoline overhead on VLAN and TEB GRO
 
  - use less memory for sysctls, add a new sysctl type, to allow using
 	u8 instead of "int" and "long" and shrink networking sysctls
 
  - veth: allow GRO without XDP - this allows aggregating UDP
 	packets before handing them off to routing, bridge, OvS, etc.
 
  - allow specifing ifindex when device is moved to another namespace
 
  - netfilter:
 	- nft_socket: add support for cgroupsv2
 	- nftables: add catch-all set element - special element used
 	  to define a default action in case normal lookup missed
 	- use net_generic infra in many modules to avoid allocating
 	  per-ns memory unnecessarily
 
  - xps: improve the xps handling to avoid potential out-of-bound
 	accesses and use-after-free when XPS change race with other
 	re-configuration under traffic
 
  - add a config knob to turn off per-cpu netdev refcnt to catch
 	underflows in testing
 
 Device APIs:
 
  - add WWAN subsystem to organize the WWAN interfaces better and
    hopefully start driving towards more unified and vendor-
    -independent APIs
 
  - ethtool:
 	- add interface for reading IEEE MIB stats (incl. mlx5 and
 	  bnxt support)
 	- allow network drivers to dump arbitrary SFP EEPROM data,
 	  current offset+length API was a poor fit for modern SFP
 	  which define EEPROM in terms of pages (incl. mlx5 support)
 
  - act_police, flow_offload: add support for packet-per-second
 	policing (incl. offload for nfp)
 
  - psample: add additional metadata attributes like transit delay
 	for packets sampled from switch HW (and corresponding egress
 	and policy-based sampling in the mlxsw driver)
 
  - dsa: improve support for sandwiched LAGs with bridge and DSA
 
  - netfilter:
 	- flowtable: use direct xmit in topologies with IP
 	  forwarding, bridging, vlans etc.
 	- nftables: counter hardware offload support
 
  - Bluetooth:
 	- improvements for firmware download w/ Intel devices
 	- add support for reading AOSP vendor capabilities
 	- add support for virtio transport driver
 
  - mac80211:
 	- allow concurrent monitor iface and ethernet rx decap
 	- set priority and queue mapping for injected frames
 
  - phy: add support for Clause-45 PHY Loopback
 
  - pci/iov: add sysfs MSI-X vector assignment interface
 	to distribute MSI-X resources to VFs (incl. mlx5 support)
 
 New hardware/drivers:
 
  - dsa: mv88e6xxx: add support for Marvell mv88e6393x -
 	11-port Ethernet switch with 8x 1-Gigabit Ethernet
 	and 3x 10-Gigabit interfaces.
 
  - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
 	and BCM63xx switches
 
  - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
 
  - ath11k: support for QCN9074 a 802.11ax device
 
  - Bluetooth: Broadcom BCM4330 and BMC4334
 
  - phy: Marvell 88X2222 transceiver support
 
  - mdio: add BCM6368 MDIO mux bus controller
 
  - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
 
  - mana: driver for Microsoft Azure Network Adapter (MANA)
 
  - Actions Semi Owl Ethernet MAC
 
  - can: driver for ETAS ES58X CAN/USB interfaces
 
 Pure driver changes:
 
  - add XDP support to: enetc, igc, stmmac
  - add AF_XDP support to: stmmac
 
  - virtio:
 	- page_to_skb() use build_skb when there's sufficient tailroom
 	  (21% improvement for 1000B UDP frames)
 	- support XDP even without dedicated Tx queues - share the Tx
 	  queues with the stack when necessary
 
  - mlx5:
 	- flow rules: add support for mirroring with conntrack,
 	  matching on ICMP, GTP, flex filters and more
 	- support packet sampling with flow offloads
 	- persist uplink representor netdev across eswitch mode
 	  changes
 	- allow coexistence of CQE compression and HW time-stamping
 	- add ethtool extended link error state reporting
 
  - ice, iavf: support flow filters, UDP Segmentation Offload
 
  - dpaa2-switch:
 	- move the driver out of staging
 	- add spanning tree (STP) support
 	- add rx copybreak support
 	- add tc flower hardware offload on ingress traffic
 
  - ionic:
 	- implement Rx page reuse
 	- support HW PTP time-stamping
 
  - octeon: support TC hardware offloads - flower matching on ingress
 	and egress ratelimitting.
 
  - stmmac:
 	- add RX frame steering based on VLAN priority in tc flower
 	- support frame preemption (FPE)
 	- intel: add cross time-stamping freq difference adjustment
 
  - ocelot:
 	- support forwarding of MRP frames in HW
 	- support multiple bridges
 	- support PTP Sync one-step timestamping
 
  - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
 	learning, flooding etc.
 
  - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
 	SC7280 SoCs)
 
  - mt7601u: enable TDLS support
 
  - mt76:
 	- add support for 802.3 rx frames (mt7915/mt7615)
 	- mt7915 flash pre-calibration support
 	- mt7921/mt7663 runtime power management fixes
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmCKFPIACgkQMUZtbf5S
 Irtw0g/+NA8bWdHNgG4H5rya0pv2z3IieLRmSdDfKRQQXcJpklawc5MKVVaTee/Q
 5/QqgPdCsu1LAU6JXBKsKmyDDaMlQKdWuKbOqDSiAQKoMesZStTEHf9d851ZzgxA
 Cdb6O7BD3lBl/IN+oxNG+KcmD1LKquTPKGySq2mQtEdLO12ekAsranzmj4voKffd
 q9tBShpXQ7Dq77DLYfiQXVCvsizNcbbJFuxX0o9Lpb9+61ZyYAbogZSa9ypiZZwR
 I/9azRBtJg7UV1aD/cLuAfy66Qh7t63+rCxVazs5Os8jVO26P/jQdisnnOe/x+p9
 wYEmKm3GSu0V4SAPxkWW+ooKusflCeqDoMIuooKt6kbP6BRj540veGw3Ww/m5YFr
 7pLQkTSP/tSjuGQIdBE1LOP5LBO8DZeC8Kiop9V0fzAW9hFSZbEq25WW0bPj8QQO
 zA4Z7yWlslvxcfY2BdJX3wD8klaINkl/8fDWZFFsBdfFX2VeLtm7Xfduw34BJpvU
 rYT3oWr6PhtkPAKR32SUcemSfeWgIVU41eSshzRz3kez1NngBUuLlSGGSEaKbes5
 pZVt6pYFFVByyf6MTHFEoQvafZfEw04JILZpo4R5V8iTHzom0kD3Py064sBiXEw2
 B6t+OW4qgcxGblpFkK2lD4kR2s1TPUs0ckVO6sAy1x8q60KKKjY=
 =vcbA
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - bpf:
        - allow bpf programs calling kernel functions (initially to
          reuse TCP congestion control implementations)
        - enable task local storage for tracing programs - remove the
          need to store per-task state in hash maps, and allow tracing
          programs access to task local storage previously added for
          BPF_LSM
        - add bpf_for_each_map_elem() helper, allowing programs to walk
          all map elements in a more robust and easier to verify fashion
        - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
          redirection
        - lpm: add support for batched ops in LPM trie
        - add BTF_KIND_FLOAT support - mostly to allow use of BTF on
          s390 which has floats in its headers files
        - improve BPF syscall documentation and extend the use of kdoc
          parsing scripts we already employ for bpf-helpers
        - libbpf, bpftool: support static linking of BPF ELF files
        - improve support for encapsulation of L2 packets

   - xdp: restructure redirect actions to avoid a runtime lookup,
     improving performance by 4-8% in microbenchmarks

   - xsk: build skb by page (aka generic zerocopy xmit) - improve
     performance of software AF_XDP path by 33% for devices which don't
     need headers in the linear skb part (e.g. virtio)

   - nexthop: resilient next-hop groups - improve path stability on
     next-hops group changes (incl. offload for mlxsw)

   - ipv6: segment routing: add support for IPv4 decapsulation

   - icmp: add support for RFC 8335 extended PROBE messages

   - inet: use bigger hash table for IP ID generation

   - tcp: deal better with delayed TX completions - make sure we don't
     give up on fast TCP retransmissions only because driver is slow in
     reporting that it completed transmitting the original

   - tcp: reorder tcp_congestion_ops for better cache locality

   - mptcp:
        - add sockopt support for common TCP options
        - add support for common TCP msg flags
        - include multiple address ids in RM_ADDR
        - add reset option support for resetting one subflow

   - udp: GRO L4 improvements - improve 'forward' / 'frag_list'
     co-existence with UDP tunnel GRO, allowing the first to take place
     correctly even for encapsulated UDP traffic

   - micro-optimize dev_gro_receive() and flow dissection, avoid
     retpoline overhead on VLAN and TEB GRO

   - use less memory for sysctls, add a new sysctl type, to allow using
     u8 instead of "int" and "long" and shrink networking sysctls

   - veth: allow GRO without XDP - this allows aggregating UDP packets
     before handing them off to routing, bridge, OvS, etc.

   - allow specifing ifindex when device is moved to another namespace

   - netfilter:
        - nft_socket: add support for cgroupsv2
        - nftables: add catch-all set element - special element used to
          define a default action in case normal lookup missed
        - use net_generic infra in many modules to avoid allocating
          per-ns memory unnecessarily

   - xps: improve the xps handling to avoid potential out-of-bound
     accesses and use-after-free when XPS change race with other
     re-configuration under traffic

   - add a config knob to turn off per-cpu netdev refcnt to catch
     underflows in testing

  Device APIs:

   - add WWAN subsystem to organize the WWAN interfaces better and
     hopefully start driving towards more unified and vendor-
     independent APIs

   - ethtool:
        - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
          support)
        - allow network drivers to dump arbitrary SFP EEPROM data,
          current offset+length API was a poor fit for modern SFP which
          define EEPROM in terms of pages (incl. mlx5 support)

   - act_police, flow_offload: add support for packet-per-second
     policing (incl. offload for nfp)

   - psample: add additional metadata attributes like transit delay for
     packets sampled from switch HW (and corresponding egress and
     policy-based sampling in the mlxsw driver)

   - dsa: improve support for sandwiched LAGs with bridge and DSA

   - netfilter:
        - flowtable: use direct xmit in topologies with IP forwarding,
          bridging, vlans etc.
        - nftables: counter hardware offload support

   - Bluetooth:
        - improvements for firmware download w/ Intel devices
        - add support for reading AOSP vendor capabilities
        - add support for virtio transport driver

   - mac80211:
        - allow concurrent monitor iface and ethernet rx decap
        - set priority and queue mapping for injected frames

   - phy: add support for Clause-45 PHY Loopback

   - pci/iov: add sysfs MSI-X vector assignment interface to distribute
     MSI-X resources to VFs (incl. mlx5 support)

  New hardware/drivers:

   - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
     Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
     interfaces.

   - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
     BCM63xx switches

   - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches

   - ath11k: support for QCN9074 a 802.11ax device

   - Bluetooth: Broadcom BCM4330 and BMC4334

   - phy: Marvell 88X2222 transceiver support

   - mdio: add BCM6368 MDIO mux bus controller

   - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips

   - mana: driver for Microsoft Azure Network Adapter (MANA)

   - Actions Semi Owl Ethernet MAC

   - can: driver for ETAS ES58X CAN/USB interfaces

  Pure driver changes:

   - add XDP support to: enetc, igc, stmmac

   - add AF_XDP support to: stmmac

   - virtio:
        - page_to_skb() use build_skb when there's sufficient tailroom
          (21% improvement for 1000B UDP frames)
        - support XDP even without dedicated Tx queues - share the Tx
          queues with the stack when necessary

   - mlx5:
        - flow rules: add support for mirroring with conntrack, matching
          on ICMP, GTP, flex filters and more
        - support packet sampling with flow offloads
        - persist uplink representor netdev across eswitch mode changes
        - allow coexistence of CQE compression and HW time-stamping
        - add ethtool extended link error state reporting

   - ice, iavf: support flow filters, UDP Segmentation Offload

   - dpaa2-switch:
        - move the driver out of staging
        - add spanning tree (STP) support
        - add rx copybreak support
        - add tc flower hardware offload on ingress traffic

   - ionic:
        - implement Rx page reuse
        - support HW PTP time-stamping

   - octeon: support TC hardware offloads - flower matching on ingress
     and egress ratelimitting.

   - stmmac:
        - add RX frame steering based on VLAN priority in tc flower
        - support frame preemption (FPE)
        - intel: add cross time-stamping freq difference adjustment

   - ocelot:
        - support forwarding of MRP frames in HW
        - support multiple bridges
        - support PTP Sync one-step timestamping

   - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
     learning, flooding etc.

   - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
     SC7280 SoCs)

   - mt7601u: enable TDLS support

   - mt76:
        - add support for 802.3 rx frames (mt7915/mt7615)
        - mt7915 flash pre-calibration support
        - mt7921/mt7663 runtime power management fixes"

* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
  net: selftest: fix build issue if INET is disabled
  net: netrom: nr_in: Remove redundant assignment to ns
  net: tun: Remove redundant assignment to ret
  net: phy: marvell: add downshift support for M88E1240
  net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
  net/sched: act_ct: Remove redundant ct get and check
  icmp: standardize naming of RFC 8335 PROBE constants
  bpf, selftests: Update array map tests for per-cpu batched ops
  bpf: Add batched ops support for percpu array
  bpf: Implement formatted output helpers with bstr_printf
  seq_file: Add a seq_bprintf function
  sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
  net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
  net: fix a concurrency bug in l2tp_tunnel_register()
  net/smc: Remove redundant assignment to rc
  mpls: Remove redundant assignment to err
  llc2: Remove redundant assignment to rc
  net/tls: Remove redundant initialization of record
  rds: Remove redundant assignment to nr_sig
  dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
  ...
2021-04-29 11:57:23 -07:00
Linus Torvalds
55e6be657b Merge branch 'for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup changes from Tejun Heo:
 "The only notable change is Vipin's new misc cgroup controller.

  This implements generic support for resources which can be controlled
  by simply counting and limiting the number of resource instances - ie
  there's X number of these on the system and this cgroup subtree can
  have upto Y of those.

  The first user is the address space IDs used for virtual machine
  memory encryption and expected future usages are similar - niche
  hardware features with concrete resource limits and simple usage
  models"

* 'for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: use tsk->in_iowait instead of delayacct_is_task_waiting_on_io()
  cgroup/cpuset: fix typos in comments
  cgroup: misc: mark dummy misc_cg_res_total_usage() static inline
  svm/sev: Register SEV and SEV-ES ASIDs to the misc controller
  cgroup: Miscellaneous cgroup documentation.
  cgroup: Add misc cgroup controller
2021-04-27 18:47:42 -07:00
Florent Revest
48cac3f4a9 bpf: Implement formatted output helpers with bstr_printf
BPF has three formatted output helpers: bpf_trace_printk, bpf_seq_printf
and bpf_snprintf. Their signatures specify that all arguments are
provided from the BPF world as u64s (in an array or as registers). All
of these helpers are currently implemented by calling functions such as
snprintf() whose signatures take a variable number of arguments, then
placed in a va_list by the compiler to call vsnprintf().

"d9c9e4db bpf: Factorize bpf_trace_printk and bpf_seq_printf" introduced
a bpf_printf_prepare function that fills an array of u64 sanitized
arguments with an array of "modifiers" which indicate what the "real"
size of each argument should be (given by the format specifier). The
BPF_CAST_FMT_ARG macro consumes these arrays and casts each argument to
its real size. However, the C promotion rules implicitely cast them all
back to u64s. Therefore, the arguments given to snprintf are u64s and
the va_list constructed by the compiler will use 64 bits for each
argument. On 64 bit machines, this happens to work well because 32 bit
arguments in va_lists need to occupy 64 bits anyway, but on 32 bit
architectures this breaks the layout of the va_list expected by the
called function and mangles values.

In "88a5c690b6 bpf: fix bpf_trace_printk on 32 bit archs", this problem
had been solved for bpf_trace_printk only with a "horrid workaround"
that emitted multiple calls to trace_printk where each call had
different argument types and generated different va_list layouts. One of
the call would be dynamically chosen at runtime. This was ok with the 3
arguments that bpf_trace_printk takes but bpf_seq_printf and
bpf_snprintf accept up to 12 arguments. Because this approach scales
code exponentially, it is not a viable option anymore.

Because the promotion rules are part of the language and because the
construction of a va_list is an arch-specific ABI, it's best to just
avoid variadic arguments and va_lists altogether. Thankfully the
kernel's snprintf() has an alternative in the form of bstr_printf() that
accepts arguments in a "binary buffer representation". These binary
buffers are currently created by vbin_printf and used in the tracing
subsystem to split the cost of printing into two parts: a fast one that
only dereferences and remembers values, and a slower one, called later,
that does the pretty-printing.

This patch refactors bpf_printf_prepare to construct binary buffers of
arguments consumable by bstr_printf() instead of arrays of arguments and
modifiers. This gets rid of BPF_CAST_FMT_ARG and greatly simplifies the
bpf_printf_prepare usage but there are a few gotchas that change how
bpf_printf_prepare needs to do things.

Currently, bpf_printf_prepare uses a per cpu temporary buffer as a
generic storage for strings and IP addresses. With this refactoring, the
temporary buffers now holds all the arguments in a structured binary
format.

To comply with the format expected by bstr_printf, certain format
specifiers also need to be pre-formatted: %pB and %pi6/%pi4/%pI4/%pI6.
Because vsnprintf subroutines for these specifiers are hard to expose,
we pre-format these arguments with calls to snprintf().

Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210427174313.860948-3-revest@chromium.org
2021-04-27 15:56:31 -07:00
Alexey Dobriyan
0e0345b77a kbuild: redo fake deps at include/config/*.h
Make include/config/foo/bar.h fake deps files generation simpler.

* delete .h suffix
	those aren't header files, shorten filenames,

* delete tolower()
	Linux filesystems can deal with both upper and lowercase
	filenames very well,

* put everything in 1 directory
	Presumably 'mkdir -p' split is from dark times when filesystems
	handled huge directories badly, disks were round adding to
	seek times.

	x86_64 allmodconfig lists 12364 files in include/config.

	../obj/include/config/
	├── 104_QUAD_8
	├── 60XX_WDT
	├── 64BIT
		...
	├── ZSWAP_DEFAULT_ON
	├── ZSWAP_ZPOOL_DEFAULT
	└── ZSWAP_ZPOOL_DEFAULT_ZBUD

	0 directories, 12364 files

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-25 05:26:10 +09:00
Piotr Gorski
c3d7ef377e kbuild: add support for zstd compressed modules
kmod 28 supports modules compressed in zstd format so let's add this
possibility to kernel.

Signed-off-by: Piotr Gorski <lucjan.lucjanov@gmail.com>
Reviewed-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-25 05:25:06 +09:00
Masahiro Yamada
d4bbe94209 kbuild: remove CONFIG_MODULE_COMPRESS
CONFIG_MODULE_COMPRESS is only used to activate the choice for module
compression algorithm. It will be simpler to make the choice always
visible, and add CONFIG_MODULE_COMPRESS_NONE in the choice.

This is more consistent with the "Kernel compression mode" and "Built-in
initramfs compression mode" choices. CONFIG_KERNEL_UNCOMPRESSED and
CONFIG_INITRAMFS_COMPRESSION_NONE are available to choose no compression.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2021-04-25 05:24:33 +09:00
Masahiro Yamada
ba64beb174 kbuild: check the minimum assembler version in Kconfig
Documentation/process/changes.rst defines the minimum assembler version
(binutils version), but we have never checked it in the build time.

Kbuild never invokes 'as' directly because all assembly files in the
kernel tree are *.S, hence must be preprocessed. I do not expect
raw assembly source files (*.s) would be added to the kernel tree.

Therefore, we always use $(CC) as the assembler driver, and commit
aa824e0c96 ("kbuild: remove AS variable") removed 'AS'. However,
we are still interested in the version of the assembler acting behind.

As usual, the --version option prints the version string.

  $ as --version | head -n 1
  GNU assembler (GNU Binutils for Ubuntu) 2.35.1

But, we do not have $(AS). So, we can add the -Wa prefix so that
$(CC) passes --version down to the backing assembler.

  $ gcc -Wa,--version | head -n 1
  gcc: fatal error: no input files
  compilation terminated.

OK, we need to input something to satisfy gcc.

  $ gcc -Wa,--version -c -x assembler /dev/null -o /dev/null | head -n 1
  GNU assembler (GNU Binutils for Ubuntu) 2.35.1

The combination of Clang and GNU assembler works in the same way:

  $ clang -no-integrated-as -Wa,--version -c -x assembler /dev/null -o /dev/null | head -n 1
  GNU assembler (GNU Binutils for Ubuntu) 2.35.1

Clang with the integrated assembler fails like this:

  $ clang -integrated-as -Wa,--version -c -x assembler /dev/null -o /dev/null | head -n 1
  clang: error: unsupported argument '--version' to option 'Wa,'

For the last case, checking the error message is fragile. If the
proposal for -Wa,--version support [1] is accepted, this may not be
even an error in the future.

One easy way is to check if -integrated-as is present in the passed
arguments. We did not pass -integrated-as to CLANG_FLAGS before, but
we can make it explicit.

Nathan pointed out -integrated-as is the default for all of the
architectures/targets that the kernel cares about, but it goes
along with "explicit is better than implicit" policy. [2]

With all this in my mind, I implemented scripts/as-version.sh to
check the assembler version in Kconfig time.

  $ scripts/as-version.sh gcc
  GNU 23501
  $ scripts/as-version.sh clang -no-integrated-as
  GNU 23501
  $ scripts/as-version.sh clang -integrated-as
  LLVM 0

[1]: https://github.com/ClangBuiltLinux/linux/issues/1320
[2]: https://lore.kernel.org/linux-kbuild/20210307044253.v3h47ucq6ng25iay@archlinux-ax161/

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
2021-04-25 05:14:41 +09:00
Masahiro Yamada
6dd85ff178 kconfig: change "modules" from sub-option to first-level attribute
Now "modules" is the only member of the "option" property.

Remove "option", and move "modules" to the top level property.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-14 15:22:49 +09:00
Masahiro Yamada
f8f0d06438 kconfig: do not use allnoconfig_y option
allnoconfig_y is an ugly hack that sets a symbol to 'y' by allnoconfig.

allnoconfig does not mean a minimal set of CONFIG options because a
bunch of prompts are hidden by 'if EMBEDDED' or 'if EXPERT', but I do
not like to hack Kconfig this way.

Use the pre-existing feature, KCONFIG_ALLCONFIG, to provide a one
liner config fragment. CONFIG_EMBEDDED=y is still forced when
allnoconfig is invoked as a part of tinyconfig.

No change in the .config file produced by 'make tinyconfig'.

The output of 'make allnoconfig' will be changed; we will get
CONFIG_EMBEDDED=n because allnoconfig literally sets all symbols to n.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-14 15:22:49 +09:00
Masahiro Yamada
b75b0a819a kconfig: change defconfig_list option to environment variable
"defconfig_list" is a weird option that defines a static symbol that
declares the list of base config files in case the .config does not
exist yet.

This is quite different from other normal symbols; we just abused the
"string" type and the "default" properties to list out the input files.
They must be fixed values since these are searched for and loaded in
the parse stage.

It is an ugly hack, and should not exist in the first place. Providing
this feature as an environment variable is a saner approach.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-14 15:22:48 +09:00
Nayna Jain
0165f4ca22 ima: enable signing of modules with build time generated key
The kernel build process currently only signs kernel modules when
MODULE_SIG is enabled. Also, sign the kernel modules at build time when
IMA_APPRAISE_MODSIG is enabled.

Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-04-09 10:40:20 -04:00
Sami Tolvanen
cf68fffb66 add support for Clang CFI
This change adds support for Clang’s forward-edge Control Flow
Integrity (CFI) checking. With CONFIG_CFI_CLANG, the compiler
injects a runtime check before each indirect function call to ensure
the target is a valid function with the correct static type. This
restricts possible call targets and makes it more difficult for
an attacker to exploit bugs that allow the modification of stored
function pointers. For more details, see:

  https://clang.llvm.org/docs/ControlFlowIntegrity.html

Clang requires CONFIG_LTO_CLANG to be enabled with CFI to gain
visibility to possible call targets. Kernel modules are supported
with Clang’s cross-DSO CFI mode, which allows checking between
independently compiled components.

With CFI enabled, the compiler injects a __cfi_check() function into
the kernel and each module for validating local call targets. For
cross-module calls that cannot be validated locally, the compiler
calls the global __cfi_slowpath_diag() function, which determines
the target module and calls the correct __cfi_check() function. This
patch includes a slowpath implementation that uses __module_address()
to resolve call targets, and with CONFIG_CFI_CLANG_SHADOW enabled, a
shadow map that speeds up module look-ups by ~3x.

Clang implements indirect call checking using jump tables and
offers two methods of generating them. With canonical jump tables,
the compiler renames each address-taken function to <function>.cfi
and points the original symbol to a jump table entry, which passes
__cfi_check() validation. This isn’t compatible with stand-alone
assembly code, which the compiler doesn’t instrument, and would
result in indirect calls to assembly code to fail. Therefore, we
default to using non-canonical jump tables instead, where the compiler
generates a local jump table entry <function>.cfi_jt for each
address-taken function, and replaces all references to the function
with the address of the jump table entry.

Note that because non-canonical jump table addresses are local
to each component, they break cross-module function address
equality. Specifically, the address of a global function will be
different in each module, as it's replaced with the address of a local
jump table entry. If this address is passed to a different module,
it won’t match the address of the same function taken there. This
may break code that relies on comparing addresses passed from other
components.

CFI checking can be disabled in a function with the __nocfi attribute.
Additionally, CFI can be disabled for an entire compilation unit by
filtering out CC_FLAGS_CFI.

By default, CFI failures result in a kernel panic to stop a potential
exploit. CONFIG_CFI_PERMISSIVE enables a permissive mode, where the
kernel prints out a rate-limited warning instead, and allows execution
to continue. This option is helpful for locating type mismatches, but
should only be enabled during development.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-2-samitolvanen@google.com
2021-04-08 16:04:20 -07:00
Vipin Sharma
a72232eabd cgroup: Add misc cgroup controller
The Miscellaneous cgroup provides the resource limiting and tracking
mechanism for the scalar resources which cannot be abstracted like the
other cgroup resources. Controller is enabled by the CONFIG_CGROUP_MISC
config option.

A resource can be added to the controller via enum misc_res_type{} in
the include/linux/misc_cgroup.h file and the corresponding name via
misc_res_name[] in the kernel/cgroup/misc.c file. Provider of the
resource must set its capacity prior to using the resource by calling
misc_cg_set_capacity().

Once a capacity is set then the resource usage can be updated using
charge and uncharge APIs. All of the APIs to interact with misc
controller are in include/linux/misc_cgroup.h.

Miscellaneous controller provides 3 interface files. If two misc
resources (res_a and res_b) are registered then:

misc.capacity
A read-only flat-keyed file shown only in the root cgroup.  It shows
miscellaneous scalar resources available on the platform along with
their quantities::

    $ cat misc.capacity
    res_a 50
    res_b 10

misc.current
A read-only flat-keyed file shown in the non-root cgroups.  It shows
the current usage of the resources in the cgroup and its children::

    $ cat misc.current
    res_a 3
    res_b 0

misc.max
A read-write flat-keyed file shown in the non root cgroups. Allowed
maximum usage of the resources in the cgroup and its children.::

    $ cat misc.max
    res_a max
    res_b 4

Limit can be set by::

    # echo res_a 1 > misc.max

Limit can be set to max by::

    # echo res_a max > misc.max

Limits can be set more than the capacity value in the misc.capacity
file.

Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: David Rientjes <rientjes@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2021-04-04 13:34:46 -04:00
David S. Miller
efd13b71a3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25 15:31:22 -07:00
Linus Torvalds
50eb842fe5 Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
 "28 patches.

  Subsystems affected by this series: mm (memblock, pagealloc, hugetlb,
  highmem, kfence, oom-kill, madvise, kasan, userfaultfd, memcg, and
  zram), core-kernel, kconfig, fork, binfmt, MAINTAINERS, kbuild, and
  ia64"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (28 commits)
  zram: fix broken page writeback
  zram: fix return value on writeback_store
  mm/memcg: set memcg when splitting page
  mm/memcg: rename mem_cgroup_split_huge_fixup to split_page_memcg and add nr_pages argument
  ia64: fix ptrace(PTRACE_SYSCALL_INFO_EXIT) sign
  ia64: fix ia64_syscall_get_set_arguments() for break-based syscalls
  mm/userfaultfd: fix memory corruption due to writeprotect
  kasan: fix KASAN_STACK dependency for HW_TAGS
  kasan, mm: fix crash with HW_TAGS and DEBUG_PAGEALLOC
  mm/madvise: replace ptrace attach requirement for process_madvise
  include/linux/sched/mm.h: use rcu_dereference in in_vfork()
  kfence: fix reports if constant function prefixes exist
  kfence, slab: fix cache_alloc_debugcheck_after() for bulk allocations
  kfence: fix printk format for ptrdiff_t
  linux/compiler-clang.h: define HAVE_BUILTIN_BSWAP*
  MAINTAINERS: exclude uapi directories in API/ABI section
  binfmt_misc: fix possible deadlock in bm_register_write
  mm/highmem.c: fix zero_user_segments() with start > end
  hugetlb: do early cow when page pinned on src mm
  mm: use is_cow_mapping() across tree where proper
  ...
2021-03-14 12:23:34 -07:00
Masahiro Yamada
ea29b20a82 init/Kconfig: make COMPILE_TEST depend on HAS_IOMEM
I read the commit log of the following two:

- bc083a64b6 ("init/Kconfig: make COMPILE_TEST depend on !UML")
- 334ef6ed06 ("init/Kconfig: make COMPILE_TEST depend on !S390")

Both are talking about HAS_IOMEM dependency missing in many drivers.

So, 'depends on HAS_IOMEM' seems the direct, sensible solution to me.

This does not change the behavior of UML. UML still cannot enable
COMPILE_TEST because it does not provide HAS_IOMEM.

The current dependency for S390 is too strong. Under the condition of
CONFIG_PCI=y, S390 provides HAS_IOMEM, hence can enable COMPILE_TEST.

I also removed the meaningless 'default n'.

Link: https://lkml.kernel.org/r/20210224140809.1067582-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KP Singh <kpsingh@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Quentin Perret <qperret@google.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: "Enrico Weigelt, metux IT consult" <lkml@metux.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-13 11:27:30 -08:00
Masahiro Yamada
ce6ed1c4c9 kbuild: rebuild GCC plugins when the compiler is upgraded
Linus reported a build error due to the GCC plugin incompatibility
when the compiler is upgraded. [1]

GCC plugins are tied to a particular GCC version. So, they must be
rebuilt when the compiler is upgraded.

This seems to be a long-standing flaw since the initial support of
GCC plugins.

Extend commit 8b59cd81dc ("kbuild: ensure full rebuild when the
compiler is updated"), so that GCC plugins are covered by the
compiler upgrade detection.

[1]: https://lore.kernel.org/lkml/CAHk-=wieoN5ttOy7SnsGwZv+Fni3R6m-Ut=oxih6bbZ28G+4dw@mail.gmail.com/

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
2021-03-11 14:40:50 +09:00
David S. Miller
c1acda9807 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:

====================
pull-request: bpf-next 2021-03-09

The following pull-request contains BPF updates for your *net-next* tree.

We've added 90 non-merge commits during the last 17 day(s) which contain
a total of 114 files changed, 5158 insertions(+), 1288 deletions(-).

The main changes are:

1) Faster bpf_redirect_map(), from Björn.

2) skmsg cleanup, from Cong.

3) Support for floating point types in BTF, from Ilya.

4) Documentation for sys_bpf commands, from Joe.

5) Support for sk_lookup in bpf_prog_test_run, form Lorenz.

6) Enable task local storage for tracing programs, from Song.

7) bpf_for_each_map_elem() helper, from Yonghong.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-09 18:07:05 -08:00
Masahiro Yamada
a6aaeb8411 kbuild: fix UNUSED_KSYMS_WHITELIST for Clang LTO
Commit fbe078d397 ("kbuild: lto: add a default list of used symbols")
does not work as expected if the .config file has already specified
CONFIG_UNUSED_KSYMS_WHITELIST="my/own/white/list" before enabling
CONFIG_LTO_CLANG.

So, the user-supplied whitelist and LTO-specific white list must be
independent of each other.

I refactored the shell script so CONFIG_MODVERSIONS and CONFIG_CLANG_LTO
handle whitelists in the same way.

Fixes: fbe078d397 ("kbuild: lto: add a default list of used symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
2021-02-28 15:19:21 +09:00
Cong Wang
887596095e bpf: Clean up sockmap related Kconfigs
As suggested by John, clean up sockmap related Kconfigs:

Reduce the scope of CONFIG_BPF_STREAM_PARSER down to TCP stream
parser, to reflect its name.

Make the rest sockmap code simply depend on CONFIG_BPF_SYSCALL
and CONFIG_INET, the latter is still needed at this point because
of TCP/UDP proto update. And leave CONFIG_NET_SOCK_MSG untouched,
as it is used by non-sockmap cases.

Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Lorenz Bauer <lmb@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210223184934.6054-2-xiyou.wangcong@gmail.com
2021-02-26 12:28:03 -08:00
Bhaskar Chowdhury
f9c8bc4604 init/Kconfig: fix a typo in CC_VERSION_TEXT help text
s/compier/compiler/

Link: https://lkml.kernel.org/r/20210224223325.29099-1-unixbhaskar@gmail.com
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26 09:41:05 -08:00
Linus Torvalds
6fbd6cf85a Kbuild updates for v5.12
- Fix false-positive build warnings for ARCH=ia64 builds
 
  - Optimize dictionary size for module compression with xz
 
  - Check the compiler and linker versions in Kconfig
 
  - Fix misuse of extra-y
 
  - Support DWARF v5 debug info
 
  - Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x
    exceeded the limit
 
  - Add generic syscall{tbl,hdr}.sh for cleanups across arches
 
  - Minor cleanups of genksyms
 
  - Minor cleanups of Kconfig
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmA3zhgVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsG0C4P/A5hUNFdkYI+EffAWZiHn69t0S8j
 M1GQkZildKu/yOfm6hp3mNwgHmYgw0aAuch1htkJuv+5rXRtoK77yw0xKbUqNHyO
 VqkJWQPVUXJbWIDiu332NaETHbFTWCnPZKGmzcbVOBHbYsXUJPp17gROQ9ke0fQN
 Ae6OV5WINhoS8UnjESWb3qOO87MdQTZ+9mP+NMnVh4kV1SUeMAXLFwFll66KZTkj
 GXB330N3p9L0wQVljhXpQ/YPOd76wJNPhJWJ9+hKLFbWsedovzlHb+duprh1z1xe
 7LLaq9dEbXxe1Uz0qmK76lupXxilYMyUupTW9HIYtIsY8br8DIoBOG0bn46LVnuL
 /m+UQNfUFCYYePT7iZQNNc1DISQJrxme3bjq0PJzZTDukNnHJVahnj9x4RoNaF8j
 Dc+JME0r2i8Ccp28vgmaRgzvSsb8Xtw5icwRdwzIpyt1ubs/+tkd/GSaGzQo30Q8
 m8y1WOjovHNX7OGnOaOWBGoQAX/2k/VHeAediMsPqWUoOxwsLHYxG/4KtgwbJ5vc
 gu/Fyk1GRDklZPpLdYFVvz8TGnqSDogJgF+7WolJ6YvPGAUIDAfd5Ky2sWayddlm
 wchc3sKDVyh3lov23h0WQVTvLO9xl+NZ6THxoAGdYeQ0DUu5OxwH8qje/UpWuo1a
 DchhNN+g5pa6n56Z
 =sLxb
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Fix false-positive build warnings for ARCH=ia64 builds

 - Optimize dictionary size for module compression with xz

 - Check the compiler and linker versions in Kconfig

 - Fix misuse of extra-y

 - Support DWARF v5 debug info

 - Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x
   exceeded the limit

 - Add generic syscall{tbl,hdr}.sh for cleanups across arches

 - Minor cleanups of genksyms

 - Minor cleanups of Kconfig

* tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits)
  initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD
  kbuild: remove deprecated 'always' and 'hostprogs-y/m'
  kbuild: parse C= and M= before changing the working directory
  kbuild: reuse this-makefile to define abs_srctree
  kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig
  kconfig: omit --oldaskconfig option for 'make config'
  kconfig: fix 'invalid option' for help option
  kconfig: remove dead code in conf_askvalue()
  kconfig: clean up nested if-conditionals in check_conf()
  kconfig: Remove duplicate call to sym_get_string_value()
  Makefile: Remove # characters from compiler string
  Makefile: reuse CC_VERSION_TEXT
  kbuild: check the minimum linker version in Kconfig
  kbuild: remove ld-version macro
  scripts: add generic syscallhdr.sh
  scripts: add generic syscalltbl.sh
  arch: syscalls: remove $(srctree)/ prefix from syscall tables
  arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work
  gen_compile_commands: prune some directories
  kbuild: simplify access to the kernel's version
  ...
2021-02-25 10:17:31 -08:00
Linus Torvalds
4c48faba5b Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:
 "A few small subsystems and some of MM.

  172 patches.

  Subsystems affected by this patch series: hexagon, scripts, ntfs,
  ocfs2, vfs, and mm (slab-generic, slab, slub, debug, pagecache, swap,
  memcg, pagemap, mprotect, mremap, page-reporting, vmalloc, kasan,
  pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction,
  mempolicy, oom-kill, hugetlbfs, and migration)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (172 commits)
  mm/migrate: remove unneeded semicolons
  hugetlbfs: remove unneeded return value of hugetlb_vmtruncate()
  hugetlbfs: fix some comment typos
  hugetlbfs: correct some obsolete comments about inode i_mutex
  hugetlbfs: make hugepage size conversion more readable
  hugetlbfs: remove meaningless variable avoid_reserve
  hugetlbfs: correct obsolete function name in hugetlbfs_read_iter()
  hugetlbfs: use helper macro default_hstate in init_hugetlbfs_fs
  hugetlbfs: remove useless BUG_ON(!inode) in hugetlbfs_setattr()
  hugetlbfs: remove special hugetlbfs_set_page_dirty()
  mm/hugetlb: change hugetlb_reserve_pages() to type bool
  mm, oom: fix a comment in dump_task()
  mm/mempolicy: use helper range_in_vma() in queue_pages_test_walk()
  numa balancing: migrate on fault among multiple bound nodes
  mm, compaction: make fast_isolate_freepages() stay within zone
  mm/compaction: fix misbehaviors of fast_find_migrateblock()
  mm/compaction: correct deferral logic for proactive compaction
  mm/compaction: remove duplicated VM_BUG_ON_PAGE !PageLocked
  mm/compaction: remove rcu_read_lock during page compaction
  z3fold: simplify the zhdr initialization code in init_z3fold_page()
  ...
2021-02-24 16:20:38 -08:00
Vlastimil Babka
fe2cce15d6 mm, slub: remove slub_memcg_sysfs boot param and CONFIG_SLUB_MEMCG_SYSFS_ON
The boot param and config determine the value of memcg_sysfs_enabled,
which is unused since commit 10befea91b ("mm: memcg/slab: use a single
set of kmem_caches for all allocations") as there are no per-memcg kmem
caches anymore.

Link: https://lkml.kernel.org/r/20210127124745.7928-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24 13:38:27 -08:00
Linus Torvalds
a555bdd0c5 Kbuild: enable TRIM_UNUSED_KSYMS again, with some guarding
In commit 5cf0fd591f ("Kbuild: disable TRIM_UNUSED_KSYMS option") I
disabled this option because it's hugely expensive at build time, and I
questioned how much use it gets.

Several people piped up and convinced me it's actually useful, so
instead of disabling it entirely, it now depends on EXPERT and gets
disabled by COMPILE_TEST builds so that 'allmodconfig' style things
don't enable it.

I still hope somebody will take a look at the build time issue, because
as Arnd also noted:

 "However, the combination of thinlto and trim indeed has a steep cost
  in compile time, taking almost twice as long as a normal defconfig
  (gc-sections makes it slightly faster)"

Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Cristoph Hellwig <hch@lst.de>,
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24 08:57:06 -08:00
Linus Torvalds
5cf0fd591f Kbuild: disable TRIM_UNUSED_KSYMS option
The removal of EXPORT_UNUSED_SYMBOL() in commit 367948220f looks like
(and was sold as) a no-op, but it actually had a rather serious and
subtle side effect: the UNUSED_SYMBOLS option not only enabled the
removed (unused) functionality, it also _disabled_ the TRIM_UNUSED_KSYMS
functionality.

And it turns out that TRIM_UNUSED_KSYMS is a huge time waste, and takes
up a third of the kernel build time for me.  For no actual upside, since
no distro is likely to ever be able to enable it (because they all
support external kernel modules).

Rather than re-enable EXPORT_UNUSED_SYMBOL, this just disables the
TRIM_UNUSED_KSYMS option by marking it broken.  I'm tempted to just
remove the support entirely, but maybe somebody has a use-case and can
fix the behavior of it.

I could have just disabled it for COMPILE_TEST, but it really smells
like the TRIM_UNUSED_KSYMS option is badly done and not really useful,
so this takes the more direct approach - let's see if anybody ever
actually notices or complains.

Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jessica Yu <jeyu@kernel.org>
Fixes: 367948220f ("module: remove EXPORT_UNUSED_SYMBOL*")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-23 12:21:58 -08:00
Linus Torvalds
21a6ab2131 Modules updates for v5.12
Summary of modules changes for the 5.12 merge window:
 
 - Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These export
   types were introduced between 2006 - 2008. All the of the unused symbols have
   been long removed and gpl future symbols were converted to gpl quite a long
   time ago, and I don't believe these export types have been used ever since.
   So, I think it should be safe to retire those export types now. (Christoph Hellwig)
 
 - Refactor and clean up some aged code cruft in the module loader (Christoph Hellwig)
 
 - Build {,module_}kallsyms_on_each_symbol only when livepatching is enabled, as
   it is the only caller (Christoph Hellwig)
 
 - Unexport find_module() and module_mutex and fix the last module
   callers to not rely on these anymore. Make module_mutex internal to
   the module loader. (Christoph Hellwig)
 
 - Harden ELF checks on module load and validate ELF structures before checking
   the module signature (Frank van der Linden)
 
 - Fix undefined symbol warning for clang (Fangrui Song)
 
 - Fix smatch warning (Dan Carpenter)
 
 Signed-off-by: Jessica Yu <jeyu@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEVrp26glSWYuDNrCUwEV+OM47wXIFAmA0/KMQHGpleXVAa2Vy
 bmVsLm9yZwAKCRDARX44zjvBcu0uD/4nmRp18EKAtdUZivsZHat0aEWGlkmrVueY
 5huYw6iwM8b/wIAl3xwLki1Iv0/l0a83WXZhLG4ekl0/Nj8kgllA+jtBrZWpoLMH
 CZusN5dS9YwwyD2vu3ak83ARcehcDEPeA9thvc3uRFGis6Hi4bt1rkzGdrzsgqR4
 tybfN4qaQx4ZAKFxA8bnS58l7QTFwUzTxJfM6WWzl1Q+mLZDr/WP+loJ/f1/oFFg
 ufN31KrqqFpdQY5UKq5P4H8FVq/eXE1Mwl8vo3HsnAj598fznyPUmA3D/j+N4GuR
 sTGBVZ9CSehUj7uZRs+Qgg6Bd+y3o44N29BrdZWA6K3ieTeQQpA+VgPUNrDBjGhP
 J/9Y4ms4PnuNEWWRaa73m9qsVqAsjh9+T2xp9PYn9uWLCM8BvQFtWcY7tw4/nB0/
 INmyiP/tIRpwWkkBl47u1TPR09FzBBGDZjBiSn3lm3VX+zCYtHoma5jWyejG11cf
 ybDrTsci9ANyHNP2zFQsUOQJkph78PIal0i3k4ODqGJvaC0iEIH3Xjv+0dmE14rq
 kGRrG/HN6HhMZPjashudVUktyTZ63+PJpfFlQbcUzdvjQQIkzW0vrCHMWx9vD1xl
 Na7vZLl4Nb03WSJp6saY6j2YSRKL0poGETzGqrsUAHEhpEOPHduaiCVlAr/EmeMk
 p6SrWv8+UQ==
 =T29Q
 -----END PGP SIGNATURE-----

Merge tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux

Pull module updates from Jessica Yu:

 - Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These
   export types were introduced between 2006 - 2008. All the of the
   unused symbols have been long removed and gpl future symbols were
   converted to gpl quite a long time ago, and I don't believe these
   export types have been used ever since. So, I think it should be safe
   to retire those export types now (Christoph Hellwig)

 - Refactor and clean up some aged code cruft in the module loader
   (Christoph Hellwig)

 - Build {,module_}kallsyms_on_each_symbol only when livepatching is
   enabled, as it is the only caller (Christoph Hellwig)

 - Unexport find_module() and module_mutex and fix the last module
   callers to not rely on these anymore. Make module_mutex internal to
   the module loader (Christoph Hellwig)

 - Harden ELF checks on module load and validate ELF structures before
   checking the module signature (Frank van der Linden)

 - Fix undefined symbol warning for clang (Fangrui Song)

 - Fix smatch warning (Dan Carpenter)

* tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: potential uninitialized return in module_kallsyms_on_each_symbol()
  module: remove EXPORT_UNUSED_SYMBOL*
  module: remove EXPORT_SYMBOL_GPL_FUTURE
  module: move struct symsearch to module.c
  module: pass struct find_symbol_args to find_symbol
  module: merge each_symbol_section into find_symbol
  module: remove each_symbol_in_section
  module: mark module_mutex static
  kallsyms: only build {,module_}kallsyms_on_each_symbol when required
  kallsyms: refactor {,module_}kallsyms_on_each_symbol
  module: use RCU to synchronize find_module
  module: unexport find_module and module_mutex
  drm: remove drm_fb_helper_modinit
  powerpc/powernv: remove get_cxl_module
  module: harden ELF info handling
  module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols
2021-02-23 10:15:33 -08:00
Linus Torvalds
79db4d2293 clang-lto series for v5.12-rc1
- Clang LTO build infrastructure and arm64-specific enablement (Sami Tolvanen)
 - Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmA0OEYACgkQiXL039xt
 wCYGJw/8CcyvQUGmXYEZVDLMahKz93RYijiGuSTVnhl0pNAyfOojaZ8Z//eD1VNA
 s82azW1XybbA6RnPGD7YQzYz27cSF2qUFDmplwVfE4mwBnPXzRxtVBDLSxksP1HS
 77sCOu91QhbovPCWET4dSHLJB3DVc78FiW4lVlRgrglyAz+dut1iXYar5e7VNoS0
 S4MwnqwteHC6YXP619rubhpdDoj7njuw1uxRIaodt9S/zRSpl5MCUgHmzQusgezs
 yWDdPHPWHnF7xxKgwSvE7AKZPdOnIxKxRi6Yd6vUIyrYB3qLZkFe75nUsgMroAhs
 /Bgrn69U2McMiJsOdh0ERzP2VNYfvMacBQ308nb45j83Bgv5l6uj8QOZU4ZogmXV
 PsDzsfUe9GsxgYexfozGX61rpd6JinzQKVyoDW3oTT54fbBxO3uDqT8kOBw72dPT
 9nkOxTzyb+UO0dpb/MhXLGkGcv8+lTA5ffVIKUx5UxKngRbukc3dxwVJgO4HmucK
 bwVQGD83D+/if5/JL9WtQRjDwFEn+IFmdv+3cAXkRo4IIS18LPZB1MJncTeWr8Z9
 HlkuDXlJOncUWCABGd1IKu1j0S2HpXV4qhqQXJ6PdfOvUPEaD9qgqEAjD5FxxyXF
 wpaV2MWya5i1FGwD5UKhi8hVnAFJyF0/w+enjiPwlmIbjdyEVXE=
 =6peY
 -----END PGP SIGNATURE-----

Merge tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull clang LTO updates from Kees Cook:
 "Clang Link Time Optimization.

  This is built on the work done preparing for LTO by arm64 folks,
  tracing folks, etc. This includes the core changes as well as the
  remaining pieces for arm64 (LTO has been the default build method on
  Android for about 3 years now, as it is the prerequisite for the
  Control Flow Integrity protections).

  While x86 LTO enablement is done, it depends on some pending objtool
  clean-ups. It's possible that I'll send a "part 2" pull request for
  LTO that includes x86 support.

  For merge log posterity, and as detailed in commit dc5723b02e
  ("kbuild: add support for Clang LTO"), here is the lt;dr to do an LTO
  build:

        make LLVM=1 LLVM_IAS=1 defconfig
        scripts/config -e LTO_CLANG_THIN
        make LLVM=1 LLVM_IAS=1

  (To do a cross-compile of arm64, add "CROSS_COMPILE=aarch64-linux-gnu-"
  and "ARCH=arm64" to the "make" command lines.)

  Summary:

   - Clang LTO build infrastructure and arm64-specific enablement (Sami
     Tolvanen)

   - Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)"

* tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  kbuild: prevent CC_FLAGS_LTO self-bloating on recursive rebuilds
  arm64: allow LTO to be selected
  arm64: disable recordmcount with DYNAMIC_FTRACE_WITH_REGS
  arm64: vdso: disable LTO
  drivers/misc/lkdtm: disable LTO for rodata.o
  efi/libstub: disable LTO
  scripts/mod: disable LTO for empty.c
  modpost: lto: strip .lto from module names
  PCI: Fix PREL32 relocations for LTO
  init: lto: fix PREL32 relocations
  init: lto: ensure initcall ordering
  kbuild: lto: add a default list of used symbols
  kbuild: lto: merge module sections
  kbuild: lto: limit inlining
  kbuild: lto: fix module versioning
  kbuild: add support for Clang LTO
  tracing: move function tracer options to Kconfig
2021-02-23 09:28:51 -08:00