For broken hardlinks, we do not return lower st_ino, so we should
also not return lower pseudo st_dev.
Fixes: a0c5ad307a ("ovl: relax same fs constraint for constant st_ino")
Cc: <stable@vger.kernel.org> #v4.15
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
As of now if we encounter an opaque dir while looking for a dentry, we set
d->last=true. This means that there is no need to look further in any of
the lower layers. This works fine as long as there are no redirets or
relative redircts. But what if there is an absolute redirect on the
children dentry of opaque directory. We still need to continue to look into
next lower layer. This patch fixes it.
Here is an example to demonstrate the issue. Say you have following setup.
upper: /redirect (redirect=/a/b/c)
lower1: /a/[b]/c ([b] is opaque) (c has absolute redirect=/a/b/d/)
lower0: /a/b/d/foo
Now "redirect" dir should merge with lower1:/a/b/c/ and lower0:/a/b/d.
Note, despite the fact lower1:/a/[b] is opaque, we need to continue to look
into lower0 because children c has an absolute redirect.
Following is a reproducer.
Watch me make foo disappear:
$ mkdir lower middle upper work work2 merged
$ mkdir lower/origin
$ touch lower/origin/foo
$ mount -t overlay none merged/ \
-olowerdir=lower,upperdir=middle,workdir=work2
$ mkdir merged/pure
$ mv merged/origin merged/pure/redirect
$ umount merged
$ mount -t overlay none merged/ \
-olowerdir=middle:lower,upperdir=upper,workdir=work
$ mv merged/pure/redirect merged/redirect
Now you see foo inside a twice redirected merged dir:
$ ls merged/redirect
foo
$ umount merged
$ mount -t overlay none merged/ \
-olowerdir=middle:lower,upperdir=upper,workdir=work
After mount cycle you don't see foo inside the same dir:
$ ls merged/redirect
During middle layer lookup, the opaqueness of middle/pure is left in
the lookup state and then middle/pure/redirect is wrongly treated as
opaque.
Fixes: 02b69b284c ("ovl: lookup redirects")
Cc: <stable@vger.kernel.org> #v4.10
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
d->last signifies that this is the last layer we are looking into and there
is no more. And that means this allows for some optimzation opportunities
during lookup. For example, in ovl_lookup_single() we don't have to check
for opaque xattr of a directory is this is the last layer we are looking
into (d->last = true).
But knowing for sure whether we are looking into last layer can be very
tricky. If redirects are not enabled, then we can look at poe->numlower and
figure out if the lookup we are about to is last layer or not. But if
redircts are enabled then it is possible poe->numlower suggests that we are
looking in last layer, but there is an absolute redirect present in found
element and that redirects us to a layer in root and that means lookup will
continue in lower layers further.
For example, consider following.
/upperdir/pure (opaque=y)
/upperdir/pure/foo (opaque=y,redirect=/bar)
/lowerdir/bar
In this case pure is "pure upper". When we look for "foo", that time
poe->numlower=0. But that alone does not mean that we will not search for a
merge candidate in /lowerdir. Absolute redirect changes that.
IOW, d->last should not be set just based on poe->numlower if redirects are
enabled. That can lead to setting d->last while it should not have and that
means we will not check for opaque xattr while we should have.
So do this.
- If redirects are not enabled, then continue to rely on poe->numlower
information to determine if it is last layer or not.
- If redirects are enabled, then set d->last = true only if this is the
last layer in root ovl_entry (roe).
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 02b69b284c ("ovl: lookup redirects")
Cc: <stable@vger.kernel.org> #v4.10
Eddie Horng reported that readdir of an overlayfs directory that
was exported via NFSv3 returns entries with d_type set to DT_UNKNOWN.
The reason is that while preparing the response for readdirplus, nfsd
checks inside encode_entryplus_baggage() that a child dentry's inode
number matches the value of d_ino returns by overlayfs readdir iterator.
Because the overlayfs inodes use arbitrary inode numbers that are not
correlated with the values of st_ino/d_ino, NFSv3 falls back to not
encoding d_type. Although this is an allowed behavior, we can fix it for
the case of all overlayfs layers on the same underlying filesystem.
When NFS export is enabled and d_ino is consistent with st_ino
(samefs), set the same value also to i_ino in ovl_fill_inode() for all
overlayfs inodes, nfsd readdirplus sanity checks will pass.
ovl_fill_inode() may be called from ovl_new_inode(), before real inode
was created with ino arg 0. In that case, i_ino will be updated to real
upper inode i_ino on ovl_inode_init() or ovl_inode_update().
Reported-by: Eddie Horng <eddiehorng.tw@gmail.com>
Tested-by: Eddie Horng <eddiehorng.tw@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Fixes: 8383f17488 ("ovl: wire up NFS export operations")
Cc: <stable@vger.kernel.org> #v4.16
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Non-root user cannot create kprobe or uprobe through the text-based
interface (kprobe_events, uprobe_events),so they should not be able
to create probes via perf_event_open() either.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Song Liu <songliubraving@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 33ea4b2427 ("perf/core: Implement the 'perf_uprobe' PMU")
Fixes: e12f03d703 ("perf/core: Implement the 'perf_kprobe' PMU")
Link: http://lkml.kernel.org/r/C0B2EFB5-C403-4BDB-9046-C14B3EE66999@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The pmd_set_huge() and pud_set_huge() functions are used from
the generic ioremap() code to establish large mappings where this
is possible.
But the generic ioremap() code does not check whether the
PMD/PUD entries are already populated with a non-leaf entry,
so that any page-table pages these entries point to will be
lost.
Further, on x86-32 with SHARED_KERNEL_PMD=0, this causes a
BUG_ON() in vmalloc_sync_one() when PMD entries are synced
from swapper_pg_dir to the current page-table. This happens
because the PMD entry from swapper_pg_dir was promoted to a
huge-page entry while the current PGD still contains the
non-leaf entry. Because both entries are present and point
to a different page, the BUG_ON() triggers.
This was actually triggered with pti-x32 enabled in a KVM
virtual machine by the graphics driver.
A real and better fix for that would be to improve the
page-table handling in the generic ioremap() code. But that is
out-of-scope for this patch-set and left for later work.
Reported-by: David H. Gutteridge <dhgutteridge@sympatico.ca>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Waiman Long <llong@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180411152437.GC15462@8bytes.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Global pages are bad for hardening because they potentially let an
exploit read the kernel image via a Meltdown-style attack which
makes it easier to find gadgets.
But, global pages are good for performance because they reduce TLB
misses when making user/kernel transitions, especially when PCIDs
are not available, such as on older hardware, or where a hypervisor
has disabled them for some reason.
This patch implements a basic, sane policy: If you have PCIDs, you
only map a minimal amount of kernel text global. If you do not have
PCIDs, you map all kernel text global.
This policy effectively makes PCIDs something that not only adds
performance but a little bit of hardening as well.
I ran a simple "lseek" microbenchmark[1] to test the benefit on
a modern Atom microserver. Most of the benefit comes from applying
the series before this patch ("entry only"), but there is still a
signifiant benefit from this patch.
No Global Lines (baseline ): 6077741 lseeks/sec
88 Global Lines (entry only): 7528609 lseeks/sec (+23.9%)
94 Global Lines (this patch): 8433111 lseeks/sec (+38.8%)
[1.] https://github.com/antonblanchard/will-it-scale/blob/master/tests/lseek1.c
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180406205518.E3D989EB@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Summary:
In current kernels, with PTI enabled, no pages are marked Global. This
potentially increases TLB misses. But, the mechanism by which the Global
bit is set and cleared is rather haphazard. This patch makes the process
more explicit. In the end, it leaves us with Global entries in the page
tables for the areas truly shared by userspace and kernel and increases
TLB hit rates.
The place this patch really shines in on systems without PCIDs. In this
case, we are using an lseek microbenchmark[1] to see how a reasonably
non-trivial syscall behaves. Higher is better:
No Global pages (baseline): 6077741 lseeks/sec
88 Global Pages (this set): 7528609 lseeks/sec (+23.9%)
On a modern Skylake desktop with PCIDs, the benefits are tangible, but not
huge for a kernel compile (lower is better):
No Global pages (baseline): 186.951 seconds time elapsed ( +- 0.35% )
28 Global pages (this set): 185.756 seconds time elapsed ( +- 0.09% )
-1.195 seconds (-0.64%)
I also re-checked everything using the lseek1 test[1]:
No Global pages (baseline): 15783951 lseeks/sec
28 Global pages (this set): 16054688 lseeks/sec
+270737 lseeks/sec (+1.71%)
The effect is more visible, but still modest.
Details:
The kernel page tables are inherited from head_64.S which rudely marks
them as _PAGE_GLOBAL. For PTI, we have been relying on the grace of
$DEITY and some insane behavior in pageattr.c to clear _PAGE_GLOBAL.
This patch tries to do better.
First, stop filtering out "unsupported" bits from being cleared in the
pageattr code. It's fine to filter out *setting* these bits but it
is insane to keep us from clearing them.
Then, *explicitly* go clear _PAGE_GLOBAL from the kernel identity map.
Do not rely on pageattr to do it magically.
After this patch, we can see that "GLB" shows up in each copy of the
page tables, that we have the same number of global entries in each
and that they are the *same* entries.
/sys/kernel/debug/page_tables/current_kernel:11
/sys/kernel/debug/page_tables/current_user:11
/sys/kernel/debug/page_tables/kernel:11
9caae8ad6a1fb53aca2407ec037f612d current_kernel.GLB
9caae8ad6a1fb53aca2407ec037f612d current_user.GLB
9caae8ad6a1fb53aca2407ec037f612d kernel.GLB
A quick visual audit also shows that all the entries make sense.
0xfffffe0000000000 is the cpu_entry_area and 0xffffffff81c00000
is the entry/exit text:
0xfffffe0000000000-0xfffffe0000002000 8K ro GLB NX pte
0xfffffe0000002000-0xfffffe0000003000 4K RW GLB NX pte
0xfffffe0000003000-0xfffffe0000006000 12K ro GLB NX pte
0xfffffe0000006000-0xfffffe0000007000 4K ro GLB x pte
0xfffffe0000007000-0xfffffe000000d000 24K RW GLB NX pte
0xfffffe000002d000-0xfffffe000002e000 4K ro GLB NX pte
0xfffffe000002e000-0xfffffe000002f000 4K RW GLB NX pte
0xfffffe000002f000-0xfffffe0000032000 12K ro GLB NX pte
0xfffffe0000032000-0xfffffe0000033000 4K ro GLB x pte
0xfffffe0000033000-0xfffffe0000039000 24K RW GLB NX pte
0xffffffff81c00000-0xffffffff81e00000 2M ro PSE GLB x pmd
[1.] https://github.com/antonblanchard/will-it-scale/blob/master/tests/lseek1.c
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180406205517.C80FBE05@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The entry/exit text and cpu_entry_area are mapped into userspace and
the kernel. But, they are not _PAGE_GLOBAL. This creates unnecessary
TLB misses.
Add the _PAGE_GLOBAL flag for these areas.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180406205515.2977EE7D@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
__ro_after_init data gets stuck in the .rodata section. That's normally
fine because the kernel itself manages the R/W properties.
But, if we run __change_page_attr() on an area which is __ro_after_init,
the .rodata checks will trigger and force the area to be immediately
read-only, even if it is early-ish in boot. This caused problems when
trying to clear the _PAGE_GLOBAL bit for these area in the PTI code:
it cleared _PAGE_GLOBAL like I asked, but also took it up on itself
to clear _PAGE_RW. The kernel then oopses the next time it wrote to
a __ro_after_init data structure.
To fix this, add the kernel_set_to_readonly check, just like we have
for kernel text, just a few lines below in this function.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180406205514.8D898241@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I was mystified as to where the _PAGE_GLOBAL in the kernel page tables
for kernel text came from. I audited all the places I could find, but
I missed one: head_64.S.
The page tables that we create in here live for a long time, and they
also have _PAGE_GLOBAL set, despite whether the processor supports it
or not. It's harmless, and we got *lucky* that the pageattr code
accidentally clears it when we wipe it out of __supported_pte_mask and
then later try to mark kernel text read-only.
Comment some of these properties to make it easier to find and
understand in the future.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180406205513.079BB265@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The pageattr code has a mode where it can set or clear PTE bits in
existing PTEs, so the page protections of the *new* PTEs come from
one of two places:
1. The set/clear masks: cpa->mask_clr / cpa->mask_set
2. The existing PTE
We filter ->mask_set/clr for supported PTE bits at entry to
__change_page_attr() so we never need to filter them again.
The only other place permissions can come from is an existing PTE
and those already presumably have good bits. We do not need to filter
them again.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180406205511.BC072352@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A PTE is constructed from a physical address and a pgprotval_t.
__PAGE_KERNEL, for instance, is a pgprot_t and must be converted
into a pgprotval_t before it can be used to create a PTE. This is
done implicitly within functions like pfn_pte() by massage_pgprot().
However, this makes it very challenging to set bits (and keep them
set) if your bit is being filtered out by massage_pgprot().
This moves the bit filtering out of pfn_pte() and friends. For
users of PAGE_KERNEL*, filtering will be done automatically inside
those macros but for users of __PAGE_KERNEL*, they need to do their
own filtering now.
Note that we also just move pfn_pte/pmd/pud() over to check_pgprot()
instead of massage_pgprot(). This way, we still *look* for
unsupported bits and properly warn about them if we find them. This
might happen if an unfiltered __PAGE_KERNEL* value was passed in,
for instance.
- printk format warning fix from: Arnd Bergmann <arnd@arndb.de>
- boot crash fix from: Tom Lendacky <thomas.lendacky@amd.com>
- crash bisected by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reported-and-fixed-by: Arnd Bergmann <arnd@arndb.de>
Fixed-by: Tom Lendacky <thomas.lendacky@amd.com>
Bisected-by: Mike Galbraith <efault@gmx.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180406205509.77E1D7F6@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This adds reporting hugepage stats to virtio-balloon.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaziF/AAoJECgfDbjSjVRpVu8H/Aw8MRgCDNx85w6HdruPeJWx
NzRGAlZLaCnTc23PJ+bcAeribyPSeuTIj3M7QOMaY1fVGV8MmpQfS5lzdvmL9vJ/
Lug/7f+QNYLlao1QlszVg+4n79BRtXvH6qOdS+nj8zvTbm/pCr3ec/yrBv4Rfqy5
TWrZcceQ7Jhw/7EF7AFUxkmw2/TpRV/4yF9wOgDabshAytdN3PAzs38IYtOa+BLp
bUiJTXGPeYe0M4qkZ6zfwU2fLZqc2DCSFAagPb8jU46OfcViH8/fYfPbm5kQ7X81
LlSOg/ui6+ZJPHWzDjDy8N/HWpi0Qqbbdne60pKJC7dPlyQMRb2m5w6TqivmPyg=
=QwFg
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio update from Michael Tsirkin:
"This adds reporting hugepage stats to virtio-balloon"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_balloon: export hugetlb page allocation counts
These updates come with:
- OF_IOMMU support for the Rockchip iommu driver so that it can
use generic DT bindings
- Rework of locking in the AMD IOMMU interrupt remapping code to
make it work better in RT kernels
- Support for improved iotlb flushing in the AMD IOMMU driver
- Support for 52-bit physical and virtual addressing in the
ARM-SMMU
- Various other small fixes and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=kte5
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- OF_IOMMU support for the Rockchip iommu driver so that it can use
generic DT bindings
- rework of locking in the AMD IOMMU interrupt remapping code to make
it work better in RT kernels
- support for improved iotlb flushing in the AMD IOMMU driver
- support for 52-bit physical and virtual addressing in the ARM-SMMU
- various other small fixes and cleanups
* tag 'iommu-updates-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (53 commits)
iommu/io-pgtable-arm: Avoid warning with 32-bit phys_addr_t
iommu/rockchip: Support sharing IOMMU between masters
iommu/rockchip: Add runtime PM support
iommu/rockchip: Fix error handling in init
iommu/rockchip: Use OF_IOMMU to attach devices automatically
iommu/rockchip: Use IOMMU device for dma mapping operations
dt-bindings: iommu/rockchip: Add clock property
iommu/rockchip: Control clocks needed to access the IOMMU
iommu/rockchip: Fix TLB flush of secondary IOMMUs
iommu/rockchip: Use iopoll helpers to wait for hardware
iommu/rockchip: Fix error handling in attach
iommu/rockchip: Request irqs in rk_iommu_probe()
iommu/rockchip: Fix error handling in probe
iommu/rockchip: Prohibit unbind and remove
iommu/amd: Return proper error code in irq_remapping_alloc()
iommu/amd: Make amd_iommu_devtable_lock a spin_lock
iommu/amd: Drop the lock while allocating new irq remap table
iommu/amd: Factor out setting the remap table for a devid
iommu/amd: Use `table' instead `irt' as variable name in amd_iommu_update_ga()
iommu/amd: Remove the special case from alloc_irq_table()
...
- Rework the idle loop in order to prevent CPUs from spending too
much time in shallow idle states by making it stop the scheduler
tick before putting the CPU into an idle state only if the idle
duration predicted by the idle governor is long enough. That
required the code to be reordered to invoke the idle governor
before stopping the tick, among other things (Rafael Wysocki,
Frederic Weisbecker, Arnd Bergmann).
- Add the missing description of the residency sysfs attribute to
the cpuidle documentation (Prashanth Prakash).
- Finalize the cpufreq cleanup moving frequency table validation
from drivers to the core (Viresh Kumar).
- Fix a clock leak regression in the armada-37xx cpufreq driver
(Gregory Clement).
- Fix the initialization of the CPU performance data structures
for shared policies in the CPPC cpufreq driver (Shunyong Yang).
- Clean up the ti-cpufreq, intel_pstate and CPPC cpufreq drivers
a bit (Viresh Kumar, Rafael Wysocki).
- Mark the expected switch fall-throughs in the PM QoS core (Gustavo
Silva).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Pnk4
-----END PGP SIGNATURE-----
Merge tag 'pm-4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These include one big-ticket item which is the rework of the idle loop
in order to prevent CPUs from spending too much time in shallow idle
states. It reduces idle power on some systems by 10% or more and may
improve performance of workloads in which the idle loop overhead
matters. This has been in the works for several weeks and it has been
tested and reviewed quite thoroughly.
Also included are changes that finalize the cpufreq cleanup moving
frequency table validation from drivers to the core, a few fixes and
cleanups of cpufreq drivers, a cpuidle documentation update and a PM
QoS core update to mark the expected switch fall-throughs in it.
Specifics:
- Rework the idle loop in order to prevent CPUs from spending too
much time in shallow idle states by making it stop the scheduler
tick before putting the CPU into an idle state only if the idle
duration predicted by the idle governor is long enough.
That required the code to be reordered to invoke the idle governor
before stopping the tick, among other things (Rafael Wysocki,
Frederic Weisbecker, Arnd Bergmann).
- Add the missing description of the residency sysfs attribute to the
cpuidle documentation (Prashanth Prakash).
- Finalize the cpufreq cleanup moving frequency table validation from
drivers to the core (Viresh Kumar).
- Fix a clock leak regression in the armada-37xx cpufreq driver
(Gregory Clement).
- Fix the initialization of the CPU performance data structures for
shared policies in the CPPC cpufreq driver (Shunyong Yang).
- Clean up the ti-cpufreq, intel_pstate and CPPC cpufreq drivers a
bit (Viresh Kumar, Rafael Wysocki).
- Mark the expected switch fall-throughs in the PM QoS core (Gustavo
Silva)"
* tag 'pm-4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
tick-sched: avoid a maybe-uninitialized warning
cpufreq: Drop cpufreq_table_validate_and_show()
cpufreq: SCMI: Don't validate the frequency table twice
cpufreq: CPPC: Initialize shared perf capabilities of CPUs
cpufreq: armada-37xx: Fix clock leak
cpufreq: CPPC: Don't set transition_latency
cpufreq: ti-cpufreq: Use builtin_platform_driver()
cpufreq: intel_pstate: Do not include debugfs.h
PM / QoS: mark expected switch fall-throughs
cpuidle: Add definition of residency to sysfs documentation
time: hrtimer: Use timerqueue_iterate_next() to get to the next timer
nohz: Avoid duplication of code related to got_idle_tick
nohz: Gather tick_sched booleans under a common flag field
cpuidle: menu: Avoid selecting shallow states with stopped tick
cpuidle: menu: Refine idle state selection for running tick
sched: idle: Select idle state before stopping the tick
time: hrtimer: Introduce hrtimer_next_event_without()
time: tick-sched: Split tick_nohz_stop_sched_tick()
cpuidle: Return nohz hint from cpuidle_select()
jiffies: Introduce USER_TICK_USEC and redefine TICK_USEC
...
in my local tree for some time. I need to push them upstream:
- Separate out config-bisect.pl from ktest.pl.
This allows users to do config bisects without full ktest setup.
- Email on status change.
Allow the user to be emailed on test start, finish, failure, etc.
- Other small fixes and enhancements
-----BEGIN PGP SIGNATURE-----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=19bA
-----END PGP SIGNATURE-----
Merge tag 'ktest-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
"These commits have either been sitting in my INBOX or have been in my
local tree for some time. I need to push them upstream:
- Separate out config-bisect.pl from ktest.pl.
This allows users to do config bisects without full ktest setup.
- Email on status change.
Allow the user to be emailed on test start, finish, failure, etc.
- Other small fixes and enhancements"
* tag 'ktest-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: (24 commits)
ktest: Take submenu into account for grub2 menus
ktest.pl: Add MAIL_COMMAND option to define how to send email
ktest.pl: Use run_command to execute sending mail
ktest.pl: Allow dodie be recursive
ktest.pl: Kill test if mailer is not supported
ktest.pl: Add MAIL_PATH option to define where to find the mailer
ktest.pl: No need to print no mailer is specified when mailto is not
Ktest: add email options to sample.config
Ktest: Use dodie for critical falures
Ktest: Add SigInt handling
Ktest: Add email support
ktest.pl: Detect if a config-bisect was interrupted
ktest.pl: Make finding config-bisect.pl dynamic
ktest.pl: Have ktest.pl pass -r to config-bisect.pl to reset bisect
ktest.pl: Use diffconfig if available for failed config bisects
ktest.pl: Allow for the config-bisect.pl output to display to console
ktest: Use config-bisect.pl in ktest.pl
ktest: Add standalone config-bisect.pl program
ktest: Set do_not_reboot=y for CONFIG_BISECT_TYPE=build
ktest: Set buildonly=1 for CONFIG_BISECT_TYPE=build
...
Pull UML updates from Richard Weinberger:
- a new and faster epoll based IRQ controller and NIC driver
- misc fixes and janitorial updates
* git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
Fix vector raw inintialization logic
Migrate vector timers to new timer API
um: Compile with modern headers
um: vector: Fix an error handling path in 'vector_parse()'
um: vector: Fix a memory allocation check
um: vector: fix missing unlock on error in vector_net_open()
um: Add missing EXPORT for free_irq_by_fd()
High Performance UML Vector Network Driver
Epoll based IRQ controller
um: Use POSIX ucontext_t instead of struct ucontext
um: time: Use timespec64 for persistent clock
um: Restore symbol versions for __memcpy and memcpy
Here is a very small set of fixes for inclusion in linux-4.17-rc1:
Two changes for the maintainer file, and one more fix for the newly
added npcm platform, to enable the level 2 cache controller.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=kiZ6
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here is a very small set of fixes for inclusion in linux-4.17-rc1: Two
changes for the maintainer file, and one more fix for the newly added
npcm platform, to enable the level 2 cache controller"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
MAINTAINERS: Update ASPEED entry with details
MAINTAINERS: Migrate oxnas list to groups.io
arm: npcm: enable L2 cache in NPCM7xx architecture
* Since cifs_vfs_error was just using pr_debug_ratelimited like the rest
of cifs_dbg, move it there too
* Add a ONCE type flag to call the pr_xxx_once() debug function instead
of the ratelimited ones.
To convert existing printk_once() calls to this we can run:
perl -i -pE \
's/printk_once\s*\(([^" \n]+)(.*)/cifs_dbg(VFS|ONCE,$2/g' \
fs/cifs/*.c
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
On 32-bit (e.g. with m68k-linux-gnu-gcc-4.1):
fs/cifs/inode.c: In function ‘simple_hashstr’:
fs/cifs/inode.c:713: warning: integer constant is too large for ‘long’ type
Fixes: 7ea884c77e ("smb3: Fix root directory when server returns inode number of zero")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Adding an extra debug message to show if a tree connect failure during
reconnect (and made it a log once so it doesn't spam the logs).
Saw a case recently where tree connect repeatedly returned
access denied on reconnect and it wasn't as easy to spot as it
should have been.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
tcon->ses is being dereferenced before it is null checked, hence
there is a potential null pointer dereference.
Fix this by moving the pointer dereference after tcon->ses has
been properly null checked.
Addresses-Coverity-ID: 1467426 ("Dereference before null check")
Fixes: 93012bf984 ("cifs: add server->vals->header_preamble_size")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Guillaume Nault says:
====================
l2tp: tunnel creation fixes
L2TP tunnel creation is racy. We need to make sure that the tunnel
returned by l2tp_tunnel_create() isn't going to be freed while the
caller is using it. This is done in patch #1, by separating tunnel
creation from tunnel registration.
With the tunnel registration code in place, we can now check for
duplicate tunnels in a race-free way. This is done in patch #2, which
incidentally removes the last use of l2tp_tunnel_find().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We can't use l2tp_tunnel_find() to prevent l2tp_nl_cmd_tunnel_create()
from creating a duplicate tunnel. A tunnel can be concurrently
registered after l2tp_tunnel_find() returns. Therefore, searching for
duplicates must be done at registration time.
Finally, remove l2tp_tunnel_find() entirely as it isn't use anywhere
anymore.
Fixes: 309795f4be ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_tunnel_create() inserts the new tunnel into the namespace's tunnel
list and sets the socket's ->sk_user_data field, before returning it to
the caller. Therefore, there are two ways the tunnel can be accessed
and freed, before the caller even had the opportunity to take a
reference. In practice, syzbot could crash the module by closing the
socket right after a new tunnel was returned to pppol2tp_create().
This patch moves tunnel registration out of l2tp_tunnel_create(), so
that the caller can safely hold a reference before publishing the
tunnel. This second step is done with the new l2tp_tunnel_register()
function, which is now responsible for associating the tunnel to its
socket and for inserting it into the namespace's list.
While moving the code to l2tp_tunnel_register(), a few modifications
have been done. First, the socket validation tests are done in a helper
function, for clarity. Also, modifying the socket is now done after
having inserted the tunnel to the namespace's tunnels list. This will
allow insertion to fail, without having to revert theses modifications
in the error path (a followup patch will check for duplicate tunnels
before insertion). Either the socket is a kernel socket which we
control, or it is a user-space socket for which we have a reference on
the file descriptor. In any case, the socket isn't going to be closed
from under us.
Reported-by: syzbot+fbeeb5c3b538e8545644@syzkaller.appspotmail.com
Fixes: fd558d186d ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
The API docs describe i2c_transfer() as taking a pointer to an array
of i2c_msg containing at least 1 entry, but leaves it to the individual
drivers to sanity check the msgs and num parameters. Let's do this in
core code instead.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[wsa: changed '<= 0' to '< 1']
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Intentionally missing i2c-riic here, Chris Brandt will add himself for
that one later.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The number of I2C host controller drivers keeps increasing, and although
I had some success acquiring specific driver maintainers, my bandwidth
is by far not enough to act as a fallback for the rest of the drivers.
To reflect this status-quo in MAINTAINERS, add a separate entry for I2C
host drivers, let the I2C list (= community) be the contact point, and
mark this section as "Odd fixes".
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
On some systems, the BIOS expects certain SMBus register values to
match the hardware defaults. Restore these configuration registers at
shutdown time to avoid confusing the BIOS. This avoids hard-locking
such systems upon reboot.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@vger.kernel.org
Saving the original value of register SMBSLVCMD in
i801_enable_host_notify() doesn't work, because this function is
called not only at probe time but also at resume time. Do it in
i801_probe() instead, so that the saved value is not overwritten at
resume time.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 22e94bd677 ("i2c: i801: store and restore the SLVCMD register at load and unload")
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@vger.kernel.org # v4.10+
I added dumping of link information about tun devices over netlink in
commit 1ec010e705 ("tun: export flags, uid, gid, queue information
over netlink"), but didn't add the missing netlink notifications when
the device's exported properties change.
This patch adds notifications when owner/group or flags are modified,
when queues are attached/detached, and when a tun fd is closed.
Reported-by: Thomas Haller <thaller@redhat.com>
Fixes: 1ec010e705 ("tun: export flags, uid, gid, queue information over netlink")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Otherwise, register_netdevice advertises the creation of the device with
the default flags, instead of what the user requested.
Reported-by: Thomas Haller <thaller@redhat.com>
Fixes: 1ec010e705 ("tun: export flags, uid, gid, queue information over netlink")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 92571a1aae ("lan78xx: Connect phy early") moves the PHY
initialisation into lan78xx_probe, but lan78xx_open subsequently calls
lan78xx_reset. As well as forcing a second round of link negotiation,
this reset frequently prevents the phy interrupt from being generated
(even though the link is up), rendering the interface unusable.
Fix this issue by removing the lan78xx_reset call from lan78xx_open.
Fixes: 92571a1aae ("lan78xx: Connect phy early")
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan says:
====================
bnxt_en: Fixes for net.
This bug fix series include NULL pointer fixes in ethtool -x code path
and in the error clean up path when freeing IRQs, a ring accounting bug
that missed rings used by the RDMA driver, and 3 bug fixes related to TC
Flower and VF-reps.
v2: Fixed commit message of patch 4. Changed the pound sign to $ sign
in front of the ip command.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When open fails during ethtool -L ring change, for example, the driver
may crash at bnxt_free_irq() because bp->bnapi is NULL.
If we fail to allocate all the new rings, bnxt_open_nic() will free
all the memory including bp->bnapi. Subsequent call to bnxt_close_nic()
will try to dereference bp->bnapi in bnxt_free_irq().
Fix it by checking for !bp->bnapi in bnxt_free_irq().
Fixes: e5811b8c09 ("bnxt_en: Add IRQ remapping logic.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With recent changes to reserve both L2 and RDMA rings, we need to include
the RDMA rings in bnxt_check_rings(). Otherwise we will under-estimate
the rings we need during ethtool -L and may lead to failure.
Fixes: fbcfc8e467 ("bnxt_en: Reserve completion rings and MSIX for bnxt_re RDMA driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While a VF is configured with a bigger mtu (> 1500), any packets that
are punted to the VF-rep (slow-path) get dropped by OVS kernel-datapath
with the following message: "dropped over-mtu packet". Fix this by
returning the max-mtu value for a VF-rep derived from its corresponding VF.
VF-rep's mtu can be changed using 'ip' command as shown in this example:
$ ip link set bnxt0_pf0vf0 mtu 9000
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver currently uses src port field (along with other fields) in the
decap tunnel key, while looking up and adding tunnel nodes. This leads to
redundant cfa_decap_filter_alloc() requests to the FW and flow-miss in the
flow engine. Fix this by ignoring the src port field in decap tunnel nodes.
Fixes: f484f6782e ("bnxt_en: add hwrm FW cmds for cfa_encap_record and decap_filter")
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before this patch the following commands would succeed as far as the
user was concerned:
$ tc qdisc add dev p1p1 ingress
$ tc filter add dev p1p1 parent ffff: protocol all \
flower skip_sw action drop
$ tc filter add dev p1p1 parent ffff: protocol ipv4 \
flower skip_sw src_mac 00:02:00:00:00:01/44 action drop
The current flow offload infrastructure used does not support wildcard
matching for ethernet headers, so do not allow the second or third
commands to succeed. If a user wants to drop traffic on that interface
the protocol and MAC addresses need to be specified explicitly:
$ tc qdisc add dev p1p1 ingress
$ tc filter add dev p1p1 parent ffff: protocol arp \
flower skip_sw action drop
$ tc filter add dev p1p1 parent ffff: protocol ipv4 \
flower skip_sw action drop
...
$ tc filter add dev p1p1 parent ffff: protocol ipv4 \
flower skip_sw src_mac 00:02:00:00:00:01 action drop
$ tc filter add dev p1p1 parent ffff: protocol ipv4 \
flower skip_sw src_mac 00:02:00:00:00:02 action drop
...
There are also checks for VLAN parameters in this patch as other callers
may wildcard those parameters even if tc does not. Using different
flow infrastructure could allow this to work in the future for L2 flows,
but for now it does not.
Fixes: 2ae7408fed ("bnxt_en: bnxt: add TC flower filter offload support")
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix ethtool .get_rxfh() crash by checking for valid indirection table
address before copying the data.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding missing call to cache current backlight values.
Otherwise the brightness resets to default value on resume.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With this the dGPU turns on correctly.
Signed-off-by: Nico Sneck <nicosneck@hotmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
