- Core:
- sdw_transfer_defer() API change to dropan argument
- Reset page address rework
- Exporting sdw_nwrite_no_pm and sdw_nread_no_pm APIs
- Drivers:
- Cadence and related intel driver updates for FIFO handling and
low level msg transfers
-----BEGIN PGP SIGNATURE-----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=LwuQ
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"This is a small update which features a bit of core changes and driver
updates in Intel and cadence driver.
Core:
- sdw_transfer_defer() API change to drop an argument
- Reset page address rework
- Export sdw_nwrite_no_pm and sdw_nread_no_pm APIs
Drivers:
- Cadence and related intel driver updates for FIFO handling and low
level msg transfers"
* tag 'soundwire-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: cadence: further simplify low-level xfer_msg_defer() callback
soundwire: cadence: use directly bus sdw_defer structure
soundwire: bus: remove sdw_defer argument in sdw_transfer_defer()
soundwire: stream: use consistent pattern for freeing buffers
soundwire: bus: Remove unused reset_page_addr() callback
soundwire: bus: Don't zero page registers after every transaction
soundwire: bus_type: Avoid lockdep assert in sdw_drv_probe()
soundwire: stream: Move remaining register accesses over to no_pm
soundwire: debugfs: Switch to sdw_read_no_pm
soundwire: Provide build stubs for common functions
soundwire: bus: export sdw_nwrite_no_pm and sdw_nread_no_pm functions
soundwire: cadence: remove unused sdw_cdns_master_ops declaration
soundwire: enable optional clock registers for SoundWire 1.2 devices
ASoC/soundwire: remove is_sdca boolean property
soundwire: cadence: Drain the RX FIFO after an IO timeout
soundwire: cadence: Remove wasted space in response_buf
soundwire: cadence: Don't overflow the command FIFOs
soundwire: intel: remove DAI startup/shutdown
There's no point in passing an argument that is a pointer to a bus
member. We can directly get the member and do an indirection when
needed.
This is a first step before simplifying the hardware-specific
callbacks further.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230119073211.85979-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The code should free the message buffer used for data, the message
structure used for control and assign the latter to NULL. The last
part is missing for multi-link cases, and the order is inconsistent
for single-link cases.
Link: https://github.com/thesofproject/linux/issues/4056
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230119073211.85979-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently, port_prep callback only has commands for PRE_PREP, PREP,
and POST_PREP, which doesn't directly say whether this is for a
prepare or deprepare call. Extend the command list enum to say
whether the call is for prepare or deprepare aswell.
Also remove SDW_OPS_PORT_PREP from sdw_port_prep_ops as this is unused,
and update this enum to be simpler and more consistent with enum
sdw_clk_stop_type.
Note: Currently, the only users of SDW_OPS_PORT_POST_PREP are codec
drivers sound/soc/codecs/wsa881x.c and sound/soc/codecs/wsa883x.c, both
of which seem to assume that POST_PREP only occurs after a prepare,
even though it would also have occurred after a deprepare. Since it
doesn't make sense to mark the port prepared after a deprepare, changing
the enum to separate PORT_DEPREP from PORT_PREP should make the check
for PORT_PREP in those drivers be more logical.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230127165111.3010960-2-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to play with the runtime reference everytime a register
is accessed. All the remaining "pm" style register accesses trace back
to 4 functions:
sdw_prepare_stream
sdw_deprepare_stream
sdw_enable_stream
sdw_disable_stream
Any sensible implementation will need to hold a runtime reference
across all those functions, it makes no sense to be allowing the
device/bus to suspend whilst streams are being prepared/enabled. And
certainly in the case of the all existing users, they all call these
functions from hw_params/prepare/trigger/hw_free callbacks in ALSA,
which will have already runtime resumed all the audio devices
associated during the open callback.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221125142028.1118618-5-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the SoundWire probe, we store a pointer from the driver ops into
the 'slave' structure. This can lead to kernel oopses when unbinding
codec drivers, e.g. with the following sequence to remove machine
driver and codec driver.
/sbin/modprobe -r snd_soc_sof_sdw
/sbin/modprobe -r snd_soc_rt711
The full details can be found in the BugLink below, for reference the
two following examples show different cases of driver ops/callbacks
being invoked after the driver .remove().
kernel: BUG: kernel NULL pointer dereference, address: 0000000000000150
kernel: Workqueue: events cdns_update_slave_status_work [soundwire_cadence]
kernel: RIP: 0010:mutex_lock+0x19/0x30
kernel: Call Trace:
kernel: ? sdw_handle_slave_status+0x426/0xe00 [soundwire_bus 94ff184bf398570c3f8ff7efe9e32529f532e4ae]
kernel: ? newidle_balance+0x26a/0x400
kernel: ? cdns_update_slave_status_work+0x1e9/0x200 [soundwire_cadence 1bcf98eebe5ba9833cd433323769ac923c9c6f82]
kernel: BUG: unable to handle page fault for address: ffffffffc07654c8
kernel: Workqueue: pm pm_runtime_work
kernel: RIP: 0010:sdw_bus_prep_clk_stop+0x6f/0x160 [soundwire_bus]
kernel: Call Trace:
kernel: <TASK>
kernel: sdw_cdns_clock_stop+0xb5/0x1b0 [soundwire_cadence 1bcf98eebe5ba9833cd433323769ac923c9c6f82]
kernel: intel_suspend_runtime+0x5f/0x120 [soundwire_intel aca858f7c87048d3152a4a41bb68abb9b663a1dd]
kernel: ? dpm_sysfs_remove+0x60/0x60
This was not detected earlier in Intel tests since the tests first
remove the parent PCI device and shut down the bus. The sequence
above is a corner case which keeps the bus operational but without a
driver bound.
While trying to solve this kernel oopses, it became clear that the
existing SoundWire bus does not deal well with the unbind case.
Commit 528be501b7 ("soundwire: sdw_slave: add probe_complete structure and new fields")
added a 'probed' status variable and a 'probe_complete'
struct completion. This status is however not reset on remove and
likewise the 'probe complete' is not re-initialized, so the
bind/unbind/bind test cases would fail. The timeout used before the
'update_status' callback was also a bad idea in hindsight, there
should really be no timing assumption as to if and when a driver is
bound to a device.
An initial draft was based on device_lock() and device_unlock() was
tested. This proved too complicated, with deadlocks created during the
suspend-resume sequences, which also use the same device_lock/unlock()
as the bind/unbind sequences. On a CometLake device, a bad DSDT/BIOS
caused spurious resumes and the use of device_lock() caused hangs
during suspend. After multiple weeks or testing and painful
reverse-engineering of deadlocks on different devices, we looked for
alternatives that did not interfere with the device core.
A bus notifier was used successfully to keep track of DRIVER_BOUND and
DRIVER_UNBIND events. This solved the bind-unbind-bind case in tests,
but it can still be defeated with a theoretical corner case where the
memory is freed by a .remove while the callback is in use. The
notifier only helps make sure the driver callbacks are valid, but not
that the memory allocated in probe remains valid while the callbacks
are invoked.
This patch suggests the introduction of a new 'sdw_dev_lock' mutex
protecting probe/remove and all driver callbacks. Since this mutex is
'local' to SoundWire only, it does not interfere with existing locks
and does not create deadlocks. In addition, this patch removes the
'probe_complete' completion, instead we directly invoke the
'update_status' from the probe routine. That removes any sort of
timing dependency and a much better support for the device/driver
model, the driver could be bound before the bus started, or eons after
the bus started and the hardware would be properly initialized in all
cases.
BugLink: https://github.com/thesofproject/linux/issues/3531
Fixes: 56d4fe31af ("soundwire: Add MIPI DisCo property helpers")
Fixes: 528be501b7 ("soundwire: sdw_slave: add probe_complete structure and new fields")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220621225641.221170-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220307074039.117488-1-wangwensheng4@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The stream management currently flags an 'inconsistent state' error
when a change is requested multiple times. This was added on purpose
to identify programming mistakes.
In hindsight, there was no real reason to fail if the logic at the
ASoC-DPCM level invokes the same callback multiple times. It's
perfectly acceptable to just return and not flag an error when there
is nothing to do. The main concern with the state management is to
trap errors such as trying to enable a stream that was not prepared
first.
This patch suggests allowing the stream functions to be idempotent,
i.e. they can be called multiple times.
Note that the prepare case was already handling multiple calls, this
was added in commit c32464c939 ("soundwire: stream: only prepare
stream when it is configured.")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220126011715.28204-20-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The sdw_stream_add_slave/master() functions are called from the
.hw_params stage. We need to make sure the functions can be called
multiple times.
In this version, we assume that only 'audio' parameters provide in the
hw_params() can change. If the number of ports could change
dynamically depending on the stream configuration (number of channels,
etc), we would need to free-up all the stream resources and reallocate
them.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220126011715.28204-19-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Before we split the alloc and config steps, we need a helper to find
the Slave runtime for a stream. The helper is based on the search loop
in sdw_slave_rt_free(), which can now be simplified.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220126011715.28204-18-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Separate alloc and config parts so that follow-up patches can allow
for multiple calls to sdw_stream_add_slave/master. This is a feature
from the ALSA/ASoC frameworks which is not supported today.
This is an invasive patch which modifies the error handling flow, with
cleanups only done when an allocation fails. Configuration failures
only return an error code.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220126011715.28204-17-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Simplify sdw_stream_add_slave() by moving the linked list management
inside of the sdw_slave_alloc_rt_free() helper, this also makes the
alloc/free helpers more symmetrical.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220126011715.28204-16-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The naming is rather inconsistent, use the sdw_<object>_<action>
convention, and move the free routine after alloc/config.
No functionality change beyond rename/move.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220126011715.28204-15-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Group all exported functions prior to split of add in alloc/config
stages necessary for support of multiple calls to hw_params() by
ALSA/ASoC core.
Pure code move, no functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220126011715.28204-14-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Split the two parts so that we can do multiple configurations during
ALSA/ASoC hw_params stage. Also follow existing convention
sdw_<object>_<action> used at lower level.
No functionality change here.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220126011715.28204-13-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Code move before splitting the function in two.
No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220126011715.28204-12-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Split the two parts so that we can do multiple configurations during
ALSA/ASoC hw_params stage. Also follow existing convention
sdw_<object>_<action> used at lower level.
No functionality change here.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220126011715.28204-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Only do the allocation in that function, and move check for allocation
in the caller. This will it easier to split allocation and
configuration.
No functionality change in this patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220126011715.28204-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
re-group all the helpers in one location with a code move. For
consistency the 'slave' helpers are placed before the 'master'
helpers.
Also remove unused arguments and rename the 'release' function to
'free' for consistency.
No functional change in this patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220126011715.28204-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We can only check for Slave port ranges, the ports are not defined at
the Master level. Also move the function to the 'slave port' block.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220126011715.28204-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Continue the split with two functions for master and slave, and remove
unused arguments.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220126011715.28204-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Split loops before moving the allocation and configuration to separate
functions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220126011715.28204-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing code only has a config helper that allocates memory,
start adding alloc/config/free for ports, as a first step in the
simplification of the stream API.
This change removes a kfree() on a configuration error, this should
have not impact on existing platforms and error handling will be
revisited in follow-up patches to make sure invalid configurations
have not impact on memory allocation.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220126011715.28204-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pass the index directly to sdw_is_valid_port_range(), this will be
useful for further simplifications.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220126011715.28204-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
sdw_config_stream() only verifies the compatibility between
information provided by the Slave driver and the stream configuration.
There is no problem if we add the slave runtime to the list earlier.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220126011715.28204-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The stream parameter is not used, remove before further simplifications.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220126011715.28204-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The HDAudio ASoC support relies on the set_tdm_slots() helper to store
the HDaudio stream tag in the tx_mask. This only works because of the
pre-existing order in soc-pcm.c, where the hw_params() is handled for
codec_dais *before* cpu_dais. When the order is reversed, the
stream_tag is used as a mask in the codec fixup functions:
/* fixup params based on TDM slot masks */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
codec_dai->tx_mask)
soc_pcm_codec_params_fixup(&codec_params,
codec_dai->tx_mask);
As a result of this confusion, the codec_params_fixup() ends-up
generating bad channel masks, depending on what stream_tag was
allocated.
We could add a flag to state that the tx_mask is really not a mask,
but it would be quite ugly to persist in overloading concepts.
Instead, this patch suggests a more generic get/set 'stream' API based
on the existing model for SoundWire. We can expand the concept to
store 'stream' opaque information that is specific to different DAI
types. In the case of HDAudio DAIs, we only need to store a stream tag
as an unsigned char pointer. The TDM rx_ and tx_masks should really
only be used to store masks.
Rename get_sdw_stream/set_sdw_stream callbacks and helpers as
get_stream/set_stream. No functionality change beyond the rename.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20211224021034.26635-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mockup devices don't take part in command/control operations and their
virtual ports shall not be programmed.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210714032209.11284-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This change is needed for support of mockup devices, which by
construction will not provide any answer to a bank switch, but it's
also legit for regular cases.
If for some reason a device loses sync and cannot handle a bank
switch, we should go ahead anyways. The devices can always resync
later.
The only case where the error flow should be used is when there is a
Command_Aborted composite answer from SoundWire devices.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210714032209.11284-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In sdw_prep_deprep_slave_ports(), after the wait_for_completion()
the DP prepare status register is read. If this indicates that the
port is now prepared, the code should continue with the port setup.
It is irrelevant whether the wait_for_completion() timed out if the
port is now ready.
The previous implementation would always fail if the
wait_for_completion() timed out, even if the port was reporting
successful prepare.
This patch also fixes a minor bug where the return from sdw_read()
was not checked for error - any error code with LSBits clear could
be misinterpreted as a successful port prepare.
Fixes: 79df15b7d3 ("soundwire: Add helpers for ports operations")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210618144745.30629-1-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When stream config is failed, master runtime will release all
slave runtime in the slave_rt_list, but slave runtime is not
added to the list at this time. This patch frees slave runtime
in the config error path to fix the memory leak.
Fixes: 89e590535f ("soundwire: Add support for SoundWire stream management")
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Keyon Jie <yang.jie@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210331004610.12242-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is no need to assign a pointer to NULL if it's only used in a
loop and assigned within that loop.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210302091122.13952-12-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Cppcheck complains about possible null pointer dereferences, but it's
more like there are unnecessary initializations before walking
through a list.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210302091122.13952-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We fixed a lot of warnings in 2019 but the magic of copy-paste keeps
adding new ones...
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210323005855.20890-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This round of update includes:
- Generic bandwidth allocation algorithm from Intel folks
- PM support for Intel chipsets
- Updates to Intel drivers which makes sdw usable on latest laptops
- Support for MMIO SDW controllers found in QC chipsets
- Update to subsystem to use helpers in bitfield.h to manage register
bits
-----BEGIN PGP SIGNATURE-----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=ALTw
-----END PGP SIGNATURE-----
Merge tag 'soundwire-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire updates for 5.10-rc1
This round of update includes:
- Generic bandwidth allocation algorithm from Intel folks
- PM support for Intel chipsets
- Updates to Intel drivers which makes sdw usable on latest laptops
- Support for MMIO SDW controllers found in QC chipsets
- Update to subsystem to use helpers in bitfield.h to manage register
bits
* tag 'soundwire-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (66 commits)
soundwire: sysfs: add slave status and device number before probe
soundwire: bus: add enumerated Slave device to device list
soundwire: remove an unnecessary NULL check
soundwire: cadence: add data port test fail interrupt
soundwire: intel: enable test modes
soundwire: enable Data Port test modes
soundwire: intel: use {u32|u16}p_replace_bits
soundwire: cadence: use u32p_replace_bits
soundwire: qcom: get max rows and cols info from compatible
soundwire: qcom: add support to block packing mode
soundwire: qcom: clear BIT FIELDs before value set.
soundwire: Add generic bandwidth allocation algorithm
soundwire: cadence: add parity error injection through debugfs
soundwire: bus: export broadcast read/write capability for tests
ASoC: codecs: realtek-soundwire: ignore initial PARITY errors
soundwire: bus: use quirk to filter out invalid parity errors
soundwire: slave: add first_interrupt_done status
soundwire: bus: filter-out unwanted interrupt reports
ASoC/soundwire: bus: use property to set interrupt masks
soundwire: qcom: fix SLIBMUS/SLIMBUS typo
...
Test modes are required for all SoundWire IP, and help debug
integration issues. In theory each port can be configured with a
different mode but to simplify this patch only offers separate
configurations for the Master and Slave ports - this covers 99% of the
intended cases during platform integration.
The test mode value is set via platform-specific ways.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200920193207.31241-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This algorithm computes bus parameters like clock frequency, frame
shape and port transport parameters based on active stream(s) running
on the bus.
Developers can also implement their own .compute_params() callback for
specific resource management algorithm, and set if before calling
sdw_add_bus_master()
Credits: this patch is based on an earlier internal contribution by
Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah. All hard-coded
values were removed from the initial contribution to use BIOS
information instead.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200908131520.5712-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
snd_soc_dai_get_sdw_stream() can only return -ENOTSUPP or the stream,
NULL is not a possible value.
Fixes: 4550569bd7 ('soundwire: stream: add helper to startup/shutdown streams')
Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200903204739.31206-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
use FIELD_{GET|PREP} in stream code to get/set field values instead of
open coding masks and shift operations.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200903114504.1202143-5-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use platform-specific information to decide when to use hw_sync, not
only a number of links > 1.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200901150556.19432-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
clang static analysis flags this problem
stream.c:844:9: warning: Use of memory after
it is freed
kfree(bus->defer_msg.msg->buf);
^~~~~~~~~~~~~~~~~~~~~~~
This happens in an error handler cleaning up memory
allocated for elements in a list.
list_for_each_entry(m_rt, &stream->master_list, stream_node) {
bus = m_rt->bus;
kfree(bus->defer_msg.msg->buf);
kfree(bus->defer_msg.msg);
}
And is triggered when the call to sdw_bank_switch() fails.
There are a two problems.
First, when sdw_bank_switch() fails, though it frees memory it
does not clear bus's reference 'defer_msg.msg' to that memory.
The second problem is the freeing msg->buf. In some cases
msg will be NULL so this will dereference a null pointer.
Need to check before freeing.
Fixes: 99b8a5d608 ("soundwire: Add bank switch routine")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200902202650.14189-1-trix@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
sdw_startup_stream() and sdw_shutdown_stream() argument has been updated
but not the comments, so update these as well to fix warning with W=1
drivers/soundwire/stream.c:1859: warning: Function parameter or member 'sdw_substream' not described in 'sdw_startup_stream'
drivers/soundwire/stream.c:1859: warning: Excess function parameter 'stream' description in 'sdw_startup_stream'
drivers/soundwire/stream.c:1903: warning: Function parameter or member 'sdw_substream' not described in 'sdw_shutdown_stream'
drivers/soundwire/stream.c:1903: warning: Excess function parameter 'stream' description in 'sdw_shutdown_stream'
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200715095702.1519554-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
To handle streams at the dailink level, expose two helpers that will
be called from machine drivers.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200630184356.24939-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According to SoundWire Specification Version 1.2.
"A Data Port number X (in the range 0-14) which supports only one
value of WordLength may implement the WordLength field in the
DPX_BlockCtrl1 Register as Read-Only, returning the fixed value of
WordLength in response to reads."
As WSA881x interfaces in PDM mode making the only field "WordLength"
in DPX_BlockCtrl1" fixed and read-only. Behaviour of writing to this
register on WSA881x soundwire slave with Qualcomm Soundwire Controller
is throwing up an error. Not sure how other controllers deal with
writing to readonly registers, but this patch provides a way to avoid
writes to DPN_BlockCtrl1 register by providing a read_only_wordlength
flag in struct sdw_dpn_prop
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200311113545.23773-2-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is no point in using update for registers with write mask
as 0xFF, this adds unnecessary traffic on the bus.
Just use sdw_write directly.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312100105.5293-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the Intel QA multi-pipelines test case, there are two pipelines for
playback and capture on the same bus. The test fails with an error
when setting port params:
[ 599.224812] rt711 sdw:0:25d:711:0: invalid dpn_prop direction 1 port_num 0
[ 599.224815] sdw_program_slave_port_params failed -22
[ 599.224819] intel-sdw sdw-master-0: Program transport params failed: -22
[ 599.224822] intel-sdw sdw-master-0: Program params failed: -22
[ 599.224828] sdw_enable_stream: SDW0 Pin2-Playback: done
This problem is root-caused to the programming of the capture stream
ports while it is not yet prepared, the calling sequence is:
(1) hw_params for playback. The playback stream provide the port
information to Bus.
(2) stream_prepare for playback, Transport and port parameters
are computed for playback.
(3) hw_params for capture. The capture stream provide the port
information to Bus, but it has not been prepared so is not
accounted for in the bandwidth allocation.
(4) stream_enable for playback. Program transport and port parameters
for all masters and slaves. Since the transport and port parameters
are not computed for capture stream, sdw_program_slave_port_params
will generate a error when setting port params for capture.
in step (4), we should only program the ports for the stream that have
been prepared. A stream that is only in CONFIGURED state should be
ignored, its ports will be programmed when it becomes PREPARED.
Tested on Comet Lake.
GitHub issue: https://github.com/thesofproject/linux/issues/1637
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20200114235227.14502-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing code will unconditionally return after dealing with the
first Slave on a link. This return should only happen when there is
an error case.
Tested on Comet Lake platform.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20200114235227.14502-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
After a system suspend, the ALSA/ASoC core will invoke the .prepare()
callback and a TRIGGER_START when INFO_RESUME is not supported.
Likewise, when an underflow occurs, the .prepare callback will be invoked.
In both cases, the stream can be in DISABLED mode, and will transition
into the PREPARED mode. We however don't want the bus bandwidth to be
recomputed.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200114235227.14502-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We don't need to prepare the stream again if the stream is already
prepared.
sdw_prepare_stream() could be called multiple times without calling
sdw_deprepare_stream(). We call sdw_prepare_stream() in the prepare
dai ops and sdw_deprepare_stream() in the hw_free dai ops. If an xrun
happens, sdw_prepare_stream() will be called but
sdw_deprepare_stream() will not, which results in an imbalance and an
invalid total bandwidth.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200114235227.14502-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
