korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-16 00:34:20 +08:00
Code Issues Packages Projects Releases Wiki Activity
1,073,302 Commits 112 Branches 5,274 Tags 4.8 GiB
17224e08af
Commit Graph

5291 Commits

Author SHA1 Message Date
Rafael J. Wysocki
cb1f65c1e1 PM: s2idle: ACPI: Fix wakeup interrupts handling 
After commit e3728b50cd ("ACPI: PM: s2idle: Avoid possible race
related to the EC GPE") wakeup interrupts occurring immediately after
the one discarded by acpi_s2idle_wake() may be missed.  Moreover, if
the SCI triggers again immediately after the rearming in
acpi_s2idle_wake(), that wakeup may be missed too.

The problem is that pm_system_irq_wakeup() only calls pm_system_wakeup()
when pm_wakeup_irq is 0, but that's not the case any more after the
interrupt causing acpi_s2idle_wake() to run until pm_wakeup_irq is
cleared by the pm_wakeup_clear() call in s2idle_loop().  However,
there may be wakeup interrupts occurring in that time frame and if
that happens, they will be missed.

To address that issue first move the clearing of pm_wakeup_irq to
the point at which it is known that the interrupt causing
acpi_s2idle_wake() to tun will be discarded, before rearming the SCI
for wakeup.  Moreover, because that only reduces the size of the
time window in which the issue may manifest itself, allow
pm_system_irq_wakeup() to register two second wakeup interrupts in
a row and, when discarding the first one, replace it with the second
one.  [Of course, this assumes that only one wakeup interrupt can be
discarded in one go, but currently that is the case and I am not
aware of any plans to change that.]

Fixes: e3728b50cd ("ACPI: PM: s2idle: Avoid possible race related to the EC GPE")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2022-02-07 21:02:31 +01:00
Xiaoming Ni
6aad36d421 firmware_loader: move firmware sysctl to its own files 
Patch series "sysctl: 3rd set of kernel/sysctl cleanups", v2.

This is the third set of patches to help address cleaning the kitchen
seink in kernel/sysctl.c and to move sysctls away to where they are
actually implemented / used.

This patch (of 8):

kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

So move the firmware configuration sysctl table to the only place where
it is used, and make it clear that if sysctls are disabled this is not
used.

[akpm@linux-foundation.org: export register_firmware_config_sysctl and unregister_firmware_config_sysctl to modules]
[akpm@linux-foundation.org: use EXPORT_SYMBOL_NS_GPL instead]
[sfr@canb.auug.org.au: fix that so it compiles]
  Link: https://lkml.kernel.org/r/20211201160626.401d828d@canb.auug.org.au
[mcgrof@kernel.org: major commit log update to justify the move]

Link: https://lkml.kernel.org/r/20211124231435.1445213-1-mcgrof@kernel.org
Link: https://lkml.kernel.org/r/20211124231435.1445213-2-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2022-01-22 08:33:35 +02:00
Linus Torvalds
75242f31db RTC for 5.17 
New driver:
  - Sunplus SP7021 RTC
  - Nintendo GameCube, Wii and Wii U RTC
 
 Drivers:
  - cmos: refactor UIP handling and presence check, fix century
  - rs5c372: offset correction support, report low voltage
  - rv8803: Epson RX8804 support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmHp+jkACgkQY6TcMGxw
 OjJS+hAArVbXHT0ceVHY5mzqkBXCyVxhXdyLUw/VmedO9NvCTk1+O9VhBwKTRdQX
 FLuvPkyjZlkAk3CEfaHBp4u5AW3Xumdkuh9XwG8b3qRs3UGYBgKiNfXQFtOWHs7w
 VO+lD7+f2GNNTYbYH2dLPs6qZwVIN0rL7JTwUH7Po2mqBVztppSOYhmo3vmOqqux
 FI5jFVDoE8u+h359bIKcaax3/dne9m1uyD1WWxOJFRtY+apbECpUBfo1tmauAEXP
 gg+v7On+gboDqVe9/lwqB+xfKzWFJKwYIu6CM8+Mf/dxhtRNRXCgszoiCSFZHUwG
 GghD7Kb96xWuGX1pRe6xx5/7wixes1wCkIVGa5JQLb5E/GQ3O9y8D+Tdk6lyAP5m
 XUVPWGC/qByj6z9pBHtbHmq9lhd1vPHp3SU0ske1xlCQd3WnPq7bQ3MEw345gf4Z
 RGrtpnUPIfKzHWID+2zCzTj6TluW9FnnOjcm2U8jF/kwB+d1/H2O5xeWR7eQYbUJ
 BY5gjDRVIaM3aQC9QiiFMUorqv8Q3oE9FtjCSuLhUx6WEg4S0mtYsXtRUaLT7pRw
 RRsoeCJd8Abnf1Nl/imZ2IrRCcbNhzLAq2Aw8cHbiroAk8lSFAH2NzvcS8213JfG
 muOrIB2Q3XBu+6hq452ZDE1155FGWFLwKnAjvSRy5yRbsN79/YA=
 =nwD6
 -----END PGP SIGNATURE-----

Merge tag 'rtc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Two new drivers this cycle and a significant rework of the CMOS driver
  make the bulk of the changes.

  I also carry powerpc changes with the agreement of Michael.

  New drivers:
   - Sunplus SP7021 RTC
   - Nintendo GameCube, Wii and Wii U RTC

  Driver updates:
   - cmos: refactor UIP handling and presence check, fix century
   - rs5c372: offset correction support, report low voltage
   - rv8803: Epson RX8804 support"

* tag 'rtc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
  rtc: sunplus: fix return value in sp_rtc_probe()
  rtc: cmos: Evaluate century appropriate
  rtc: gamecube: Fix an IS_ERR() vs NULL check
  rtc: mc146818-lib: fix signedness bug in mc146818_get_time()
  dt-bindings: rtc: qcom-pm8xxx-rtc: update register numbers
  rtc: pxa: fix null pointer dereference
  rtc: ftrtc010: Use platform_get_irq() to get the interrupt
  rtc: Move variable into switch case statement
  rtc: pcf2127: Fix typo in comment
  dt-bindings: rtc: Add Sunplus RTC json-schema
  rtc: Add driver for RTC in Sunplus SP7021
  rtc: rs5c372: fix incorrect oscillation value on r2221tl
  rtc: rs5c372: add offset correction support
  rtc: cmos: avoid UIP when writing alarm time
  rtc: cmos: avoid UIP when reading alarm time
  rtc: mc146818-lib: refactor mc146818_does_rtc_work
  rtc: mc146818-lib: refactor mc146818_get_time
  rtc: mc146818-lib: extract mc146818_avoid_UIP
  rtc: mc146818-lib: fix RTC presence check
  rtc: Check return value from mc146818_get_time()
  ...
 2022-01-21 13:13:35 +02:00
Linus Torvalds
f4484d138b Merge branch 'akpm' (patches from Andrew) 
Merge more updates from Andrew Morton:
 "55 patches.

  Subsystems affected by this patch series: percpu, procfs, sysctl,
  misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2,
  hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits)
  lib: remove redundant assignment to variable ret
  ubsan: remove CONFIG_UBSAN_OBJECT_SIZE
  kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR
  lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB
  btrfs: use generic Kconfig option for 256kB page size limit
  arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB
  configs: introduce debug.config for CI-like setup
  delayacct: track delays from memory compact
  Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact
  delayacct: cleanup flags in struct task_delay_info and functions use it
  delayacct: fix incomplete disable operation when switch enable to disable
  delayacct: support swapin delay accounting for swapping without blkio
  panic: remove oops_id
  panic: use error_report_end tracepoint on warnings
  fs/adfs: remove unneeded variable make code cleaner
  FAT: use io_schedule_timeout() instead of congestion_wait()
  hfsplus: use struct_group_attr() for memcpy() region
  nilfs2: remove redundant pointer sbufs
  fs/binfmt_elf: use PT_LOAD p_align values for static PIE
  const_structs.checkpatch: add frequently used ops structs
  ...
 2022-01-20 10:41:01 +02:00
Kefeng Wang
20c0357646 mm: percpu: add generic pcpu_populate_pte() function 
With NEED_PER_CPU_PAGE_FIRST_CHUNK enabled, we need a function to
populate pte, this patch adds a generic pcpu populate pte function,
pcpu_populate_pte(), which is marked __weak and used on most
architectures, but it is overridden on x86, which has its own
implementation.

Link: https://lkml.kernel.org/r/20211216112359.103822-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2022-01-20 08:52:52 +02:00
Kefeng Wang
23f917169e mm: percpu: add generic pcpu_fc_alloc/free funciton 
With the previous patch, we could add a generic pcpu first chunk
allocate and free function to cleanup the duplicated definations on each
architecture.

Link: https://lkml.kernel.org/r/20211216112359.103822-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2022-01-20 08:52:52 +02:00
Kefeng Wang
1ca3fb3abd mm: percpu: add pcpu_fc_cpu_to_node_fn_t typedef 
Add pcpu_fc_cpu_to_node_fn_t and pass it into pcpu_fc_alloc_fn_t, pcpu
first chunk allocation will call it to alloc memblock on the
corresponding node by it, this is prepare for the next patch.

Link: https://lkml.kernel.org/r/20211216112359.103822-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2022-01-20 08:52:52 +02:00
Linus Torvalds
fd6f57bfda Kbuild updates for v5.17 
- Add new kconfig target 'make mod2noconfig', which will be useful to
    speed up the build and test iteration.
 
  - Raise the minimum supported version of LLVM to 11.0.0
 
  - Refactor certs/Makefile
 
  - Change the format of include/config/auto.conf to stop double-quoting
    string type CONFIG options.
 
  - Fix ARCH=sh builds in dash
 
  - Separate compression macros for general purposes (cmd_bzip2 etc.) and
    the ones for decompressors (cmd_bzip2_with_size etc.)
 
  - Misc Makefile cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmHnFNIVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGiQEP/1tkt9IHP7vFvkN9xChQI8HQ7HOC
 mPIxBAUzHIp1V2IALb0lfojjnpkzcMNpJZVlmqjgyYShLEPPBFwKVXs1War6GViX
 aprUMz7w1zR/vZJ2fplFmrkNwSxNp3+LSE6sHVmsliS4Vfzh7CjHb8DnaKjBvQLZ
 M+eQugjHsWI3d3E81/qtRG5EaVs6q8osF3b0Km59mrESWVYKqwlUP3aUyQCCUGFK
 mI+zC4SrHH6EAIZd//VpaleXxVtDcjjadb7Iru5MFhFdCBIRoSC3d1IWPUNUKNnK
 i0ocDXuIoAulA/mROgrpyAzLXg10qYMwwTmX+tplkHA055gKcY/v4aHym6ypH+TX
 6zd34UMTLM32LSjs8hssiQT8BiZU0uZoa/m2E9IBaiExA2sTsRZxgQMKXFFaPQJl
 jn4cRiG0K1NDeRKtq4xh2WO46OS4sPlR6zW9EXDEsS/bI05Y7LpUz7Flt6iA2Mq3
 0g8uYIYr/9drl96X83tFgTkxxB6lpB29tbsmsrKJRGxvrCDnAhXlXhPCkMajkm2Q
 PjJfNtMFzwemSZWq09+F+X5BgCjzZtroOdFI9FTMNhGWyaUJZXCtcXQ6UTIKnTHO
 cDjcURvh+l56eNEQ5SMTNtAkxB+pX8gPUmyO1wLwRUT4YodxylkTUXGyBBR9tgTn
 Yks1TnPD06ld364l
 =8BQf
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Add new kconfig target 'make mod2noconfig', which will be useful to
   speed up the build and test iteration.

 - Raise the minimum supported version of LLVM to 11.0.0

 - Refactor certs/Makefile

 - Change the format of include/config/auto.conf to stop double-quoting
   string type CONFIG options.

 - Fix ARCH=sh builds in dash

 - Separate compression macros for general purposes (cmd_bzip2 etc.) and
   the ones for decompressors (cmd_bzip2_with_size etc.)

 - Misc Makefile cleanups

* tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  kbuild: add cmd_file_size
  arch: decompressor: remove useless vmlinux.bin.all-y
  kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}
  kbuild: drop $(size_append) from cmd_zstd
  sh: rename suffix-y to suffix_y
  doc: kbuild: fix default in `imply` table
  microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV}
  certs: move scripts/extract-cert to certs/
  kbuild: do not quote string values in include/config/auto.conf
  kbuild: do not include include/config/auto.conf from shell scripts
  certs: simplify $(srctree)/ handling and remove config_filename macro
  kbuild: stop using config_filename in scripts/Makefile.modsign
  certs: remove misleading comments about GCC PR
  certs: refactor file cleaning
  certs: remove unneeded -I$(srctree) option for system_certificates.o
  certs: unify duplicated cmd_extract_certs and improve the log
  certs: use $< and $@ to simplify the key generation rule
  kbuild: remove headers_check stub
  kbuild: move headers_check.pl to usr/include/
  certs: use if_changed to re-generate the key when the key type is changed
  ...
 2022-01-19 11:15:19 +02:00
NeilBrown
a6097180d8 devtmpfs regression fix: reconfigure on each mount 
Prior to Linux v5.4 devtmpfs used mount_single() which treats the given
mount options as "remount" options, so it updates the configuration of
the single super_block on each mount.

Since that was changed, the mount options used for devtmpfs are ignored.
This is a regression which affect systemd - which mounts devtmpfs with
"-o mode=755,size=4m,nr_inodes=1m".

This patch restores the "remount" effect by calling reconfigure_single()

Fixes: d401727ea0 ("devtmpfs: don't mix {ramfs,shmem}_fill_super() with mount_single()")
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2022-01-17 09:40:29 +02:00
Linus Torvalds
3bad80dab9 Char/Misc and other driver changes for 5.17-rc1 
Here is the large set of char, misc, and other "small" driver subsystem
 changes for 5.17-rc1.
 
 Lots of different things are in here for char/misc drivers such as:
 	- habanalabs driver updates
 	- mei driver updates
 	- lkdtm driver updates
 	- vmw_vmci driver updates
 	- android binder driver updates
 	- other small char/misc driver updates
 
 Also smaller driver subsystems have also been updated, including:
 	- fpga subsystem updates
 	- iio subsystem updates
 	- soundwire subsystem updates
 	- extcon subsystem updates
 	- gnss subsystem updates
 	- phy subsystem updates
 	- coresight subsystem updates
 	- firmware subsystem updates
 	- comedi subsystem updates
 	- mhi subsystem updates
 	- speakup subsystem updates
 	- rapidio subsystem updates
 	- spmi subsystem updates
 	- virtual driver updates
 	- counter subsystem updates
 
 Too many individual changes to summarize, the shortlog contains the full
 details.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYeGNAQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymoVgCg1CPjMu8/SDj3Sm3a1UMQJn9jnl8AnjQcEp3z
 hMr9mISG4r6g4PvjrJBj
 =9May
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver updates from Greg KH:
 "Here is the large set of char, misc, and other "small" driver
  subsystem changes for 5.17-rc1.

  Lots of different things are in here for char/misc drivers such as:

   - habanalabs driver updates

   - mei driver updates

   - lkdtm driver updates

   - vmw_vmci driver updates

   - android binder driver updates

   - other small char/misc driver updates

  Also smaller driver subsystems have also been updated, including:

   - fpga subsystem updates

   - iio subsystem updates

   - soundwire subsystem updates

   - extcon subsystem updates

   - gnss subsystem updates

   - phy subsystem updates

   - coresight subsystem updates

   - firmware subsystem updates

   - comedi subsystem updates

   - mhi subsystem updates

   - speakup subsystem updates

   - rapidio subsystem updates

   - spmi subsystem updates

   - virtual driver updates

   - counter subsystem updates

  Too many individual changes to summarize, the shortlog contains the
  full details.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
  counter: 104-quad-8: Fix use-after-free by quad8_irq_handler
  dt-bindings: mux: Document mux-states property
  dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC
  counter: remove old and now unused registration API
  counter: ti-eqep: Convert to new counter registration
  counter: stm32-lptimer-cnt: Convert to new counter registration
  counter: stm32-timer-cnt: Convert to new counter registration
  counter: microchip-tcb-capture: Convert to new counter registration
  counter: ftm-quaddec: Convert to new counter registration
  counter: intel-qep: Convert to new counter registration
  counter: interrupt-cnt: Convert to new counter registration
  counter: 104-quad-8: Convert to new counter registration
  counter: Update documentation for new counter registration functions
  counter: Provide alternative counter registration functions
  counter: stm32-timer-cnt: Convert to counter_priv() wrapper
  counter: stm32-lptimer-cnt: Convert to counter_priv() wrapper
  counter: ti-eqep: Convert to counter_priv() wrapper
  counter: ftm-quaddec: Convert to counter_priv() wrapper
  counter: intel-qep: Convert to counter_priv() wrapper
  counter: microchip-tcb-capture: Convert to counter_priv() wrapper
  ...
 2022-01-14 16:02:28 +01:00
Linus Torvalds
feb7a43de5 Rework of the MSI interrupt infrastructure: 
Treewide cleanup and consolidation of MSI interrupt handling in
   preparation for further changes in this area which are necessary to:
 
   - address existing shortcomings in the VFIO area
 
   - support the upcoming Interrupt Message Store functionality which
     decouples the message store from the PCI config/MMIO space
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmHf+SETHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYobzGD/wNEFl5qQo5mNZ9thP6JSJFOItm7zMc
 2QgzCYOqNwAv4jL6Dqo+EHtbShYqDyWzKdKccgqNjmdIqgW8q7/fubN1OPzRsClV
 CZG997AsXDGXYlQcE3tXZjkeCWnWEE2AGLnygSkFV1K/r9ALAtFfTBJAWB+UD+Zc
 1P8Kxo0q0Jg+DQAMAA5bWfSSjo/Pmpr/1AFjY7+GA8BBeJJgWOyW7H1S+GYEWVOE
 RaQP81Sbd6x1JkopxkNqSJ/lbNJfnPJxi2higB56Y0OYn5CuSarYbZUM7oQ2V61t
 jN7pcEEvTpjLd6SJ93ry8WOcJVMTbccCklVfD0AfEwwGUGw2VM6fSyNrZfnrosUN
 tGBEO8eflBJzGTAwSkz1EhiGKna4o1NBDWpr0sH2iUiZC5G6V2hUDbM+0PQJhDa8
 bICwguZElcUUPOprwjS0HXhymnxghTmNHyoEP1yxGoKLTrwIqkH/9KGustWkcBmM
 hNtOCwQNqxcOHg/r3MN0KxttTASgoXgNnmFliAWA7XwseRpLWc95XPQFa5sptRhc
 EzwumEz17EW1iI5/NyZQcY+jcZ9BdgCqgZ9ECjZkyN4U+9G6iACUkxVaHUUs77jl
 a0ISSEHEvJisFOsOMYyFfeWkpIKGIKP/bpLOJEJ6kAdrUWFvlRGF3qlav3JldXQl
 ypFjPapDeB5guw==
 =vKzd
 -----END PGP SIGNATURE-----

Merge tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull MSI irq updates from Thomas Gleixner:
 "Rework of the MSI interrupt infrastructure.

  This is a treewide cleanup and consolidation of MSI interrupt handling
  in preparation for further changes in this area which are necessary
  to:

   - address existing shortcomings in the VFIO area

   - support the upcoming Interrupt Message Store functionality which
     decouples the message store from the PCI config/MMIO space"

* tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits)
  genirq/msi: Populate sysfs entry only once
  PCI/MSI: Unbreak pci_irq_get_affinity()
  genirq/msi: Convert storage to xarray
  genirq/msi: Simplify sysfs handling
  genirq/msi: Add abuse prevention comment to msi header
  genirq/msi: Mop up old interfaces
  genirq/msi: Convert to new functions
  genirq/msi: Make interrupt allocation less convoluted
  platform-msi: Simplify platform device MSI code
  platform-msi: Let core code handle MSI descriptors
  bus: fsl-mc-msi: Simplify MSI descriptor handling
  soc: ti: ti_sci_inta_msi: Remove ti_sci_inta_msi_domain_free_irqs()
  soc: ti: ti_sci_inta_msi: Rework MSI descriptor allocation
  NTB/msi: Convert to msi_on_each_desc()
  PCI: hv: Rework MSI handling
  powerpc/mpic_u3msi: Use msi_for_each-desc()
  powerpc/fsl_msi: Use msi_for_each_desc()
  powerpc/pasemi/msi: Convert to msi_on_each_dec()
  powerpc/cell/axon_msi: Convert to msi_on_each_desc()
  powerpc/4xx/hsta: Rework MSI handling
  ...
 2022-01-13 09:05:29 -08:00
Linus Torvalds
6dc69d3d0d driver core changes for 5.17-rc1 
Here is the set of changes for the driver core for 5.17-rc1.
 
 Lots of little things here, including:
 	- kobj_type cleanups
 	- auxiliary_bus documentation updates
 	- auxiliary_device conversions for some drivers (relevant
 	  subsystems all have provided acks for these)
 	- kernfs lock contention reduction for some workloads
 	- other tiny cleanups and changes.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYd7deA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ym8ngCgw0ANwrRPE5b1dthEmfU2f8Knk5kAn0pHQv6R
 VRZJypgNfU/Pt0ykstZD
 =CO9J
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the set of changes for the driver core for 5.17-rc1.

  Lots of little things here, including:

   - kobj_type cleanups

   - auxiliary_bus documentation updates

   - auxiliary_device conversions for some drivers (relevant subsystems
     all have provided acks for these)

   - kernfs lock contention reduction for some workloads

   - other tiny cleanups and changes.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (43 commits)
  kobject documentation: remove default_attrs information
  drivers/firmware: Add missing platform_device_put() in sysfb_create_simplefb
  debugfs: lockdown: Allow reading debugfs files that are not world readable
  driver core: Make bus notifiers in right order in really_probe()
  driver core: Move driver_sysfs_remove() after driver_sysfs_add()
  firmware: edd: remove empty default_attrs array
  firmware: dmi-sysfs: use default_groups in kobj_type
  qemu_fw_cfg: use default_groups in kobj_type
  firmware: memmap: use default_groups in kobj_type
  sh: sq: use default_groups in kobj_type
  headers/uninline: Uninline single-use function: kobject_has_children()
  devtmpfs: mount with noexec and nosuid
  driver core: Simplify async probe test code by using ktime_ms_delta()
  nilfs2: use default_groups in kobj_type
  kobject: remove kset from struct kset_uevent_ops callbacks
  driver core: make kobj_type constant.
  driver core: platform: document registration-failure requirement
  vdpa/mlx5: Use auxiliary_device driver data helpers
  net/mlx5e: Use auxiliary_device driver data helpers
  soundwire: intel: Use auxiliary_device driver data helpers
  ...
 2022-01-12 11:11:34 -08:00
Linus Torvalds
2d7852c379 regmap: Updates for v5.17 
A very quiet release for regmap:
 
  - Allow a custom _update_bits() operation for devices with no bus.
  - Fix an issue with creation of the debugfs directory when attaching a
    device to an existing no device regmap.
  - A trivial formatting fix.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmHcLcAACgkQJNaLcl1U
 h9AyZgf/XnwgUltXGyDUgo9OsHB6Jspmua7IFVfTXT9sJckJPCeqxJlWBiH+fv+k
 GJZwCPVmeBjRzGJV7jwOSXZgEV2JOotfLCBiGM6ZXepwisy14n4QVLN53FwJbbBW
 9OhuBGnXcS3KWJEtwz+0+ZaY6RXVWTXHL3L/T2GF2k+CfOHSvysTMOU03RVvUF8D
 3XmdghS8J8EY0RIGXZpnMD8nEePSfhq+TcLbsf9xguixo2rvd8PKFX1rcYjewn9K
 z4Srv/oERKaEfMiWk2VnYm3tjaRdFgugItpfIswJ4Eo1xe/ppEBcah3uSBja3DNB
 bnp1HpGclNYRRG3Stq6WokRu8AEFOg==
 =hTba
 -----END PGP SIGNATURE-----

Merge tag 'regmap-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
 "A very quiet release for regmap:

   - Allow a custom _update_bits() operation for devices with no bus.

   - Fix an issue with creation of the debugfs directory when attaching
     a device to an existing no device regmap.

   - A trivial formatting fix"

[ The custom _update_bits comit came in earlier through the networking
  tree that had merged it for its own needs ]

* tag 'regmap-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: debugfs: Fix indentation
  regmap: Call regmap_debugfs_exit() prior to _init()
 2022-01-11 11:48:51 -08:00
Linus Torvalds
fe8152b38d Device properties framework updates for 5.17-rc1 
- Remove device_add_properties() which does not work correctly if
    software nodes holding additional device properties are shared
    or reused (Heikki Krogerus).
 
  - Fix nargs_prop property handling for software nodes (Clément Léger).
 
  - Update documentation of ACPI device properties (Sakari Ailus).
 
  - Update the handling of graph properties in the generic framework
    to match the DT case (Sakari Ailus).
 
  - Update software nodes entry in MAINTAINERS (Andy Shevchenko).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmHcg1ASHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRx66YP/Ar0GTqI6iE+6WrF2B00ftHFq11PVTo9
 DNiYSJiV60FiaoIANd+59QfC1i2erDrUmRFvZ+Kip4rQG9UomY4Tx7QYw3jzCj8t
 yA5JJhN5kYphs0+GigdNVLkN56zwK6Cd759+GVCXQW9KkPryxhjGJeNNRthlXf8s
 Bs+4Gp3NOanl5z4LdulkjyoFMDr6kIjotcN2j8+7RkgWc4VIS3OYlFZf5dLi/i1O
 cqSkJgikRA40ZuNtsRRVGPOSGoPAPaAFZJY4j/gYx6sAhB9UQi/Xe4iQaXvsEWM2
 NlC+X2D48SiTkb1M1QpM0nJ5N/txRp+/FrMiAagBWCNer4lFA42ibyCd6dhADnIE
 lMLnbKaUqB3exCBP/BQdYDi+ypKZf88E0zX6OoZfvHj0uQV5KwOgUbbhckpLkI/j
 WZQwm/qtLGqpxW6N+IfBRwBBwPkXePep3CG37twfyVp4IXk+hm+ipMQ1dZmxwNKZ
 q9o9Iwv35KEbX6nR8psE7GCm6znYeoFPDx8GEjEDh9nfIpt2bFSYy3rw82wghkgq
 EeBD/irNS3PbFXyt8cV/cDjctgbG9SumOA5B6Iicq9y5PSnUNjKi49DGZAsqq8g/
 I2c5IFBzYwnKk4z1wCRshba9jTF2sH0NTGVvPnfWv/vCtrvURXwBxTa9z8jtuMtw
 E44VNKDhYWu2
 =/oIe
 -----END PGP SIGNATURE-----

Merge tag 'devprop-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull device properties framework updates from Rafael Wysocki:
 "These update the handling of software nodes and graph properties, and
  the MAINTAINERS entry for the former.

  Specifics:

   - Remove device_add_properties() which does not work correctly if
     software nodes holding additional device properties are shared or
     reused (Heikki Krogerus).

   - Fix nargs_prop property handling for software nodes (Clément
     Léger).

   - Update documentation of ACPI device properties (Sakari Ailus).

   - Update the handling of graph properties in the generic framework to
     match the DT case (Sakari Ailus).

   - Update software nodes entry in MAINTAINERS (Andy Shevchenko)"

* tag 'devprop-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  software node: Update MAINTAINERS data base
  software node: fix wrong node passed to find nargs_prop
  device property: Drop fwnode_graph_get_remote_node()
  device property: Use fwnode_graph_for_each_endpoint() macro
  device property: Implement fwnode_graph_get_endpoint_count()
  Documentation: ACPI: Update references
  Documentation: ACPI: Fix data node reference documentation
  device property: Fix documentation for FWNODE_GRAPH_DEVICE_DISABLED
  device property: Fix fwnode_graph_devcon_match() fwnode leak
  device property: Remove device_add_properties() API
  driver core: Don't call device_remove_properties() from device_del()
  PCI: Convert to device_create_managed_software_node()
 2022-01-10 20:48:19 -08:00
Linus Torvalds
b35b6d4d71 Power management updates for 5.17-rc1 
- Add new P-state driver for AMD processors (Huang Rui).
 
  - Fix initialization of min and max frequency QoS requests in the
    cpufreq core (Rafael Wysocki).
 
  - Fix EPP handling on Alder Lake in intel_pstate (Srinivas Pandruvada).
 
  - Make intel_pstate update cpuinfo.max_freq when notified of HWP
    capabilities changes and drop a redundant function call from that
    driver (Rafael Wysocki).
 
  - Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel,
    Stephen Boyd, Vladimir Zapolskiy).
 
  - Fix double devm_remap() in the Mediatek cpufreq driver (Hector Yuan).
 
  - Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz
    Luba).
 
  - Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman).
 
  - Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman).
 
  - Fix two comments in cpuidle code (Jason Wang, Yang Li).
 
  - Allow model-specific normal EPB value to be used in the intel_epb
    sysfs attribute handling code (Srinivas Pandruvada).
 
  - Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki).
 
  - Add safety net to supplier device release in the runtime PM core
    code (Rafael Wysocki).
 
  - Capture device status before disabling runtime PM for it (Rafael
    Wysocki).
 
  - Add new macros for declaring PM operations to allow drivers to
    avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and
    update some drivers to use these macros (Paul Cercueil).
 
  - Allow ACPI hardware signature to be honoured during restore from
    hibernation (David Woodhouse).
 
  - Update outdated operating performance points (OPP) documentation
    (Tang Yizhou).
 
  - Reduce log severity for informative message regarding frequency
    transition failures in devfreq (Tzung-Bi Shih).
 
  - Add DRAM frequency controller devfreq driver for Allwinner sunXi
    SoCs (Samuel Holland).
 
  - Add missing COMMON_CLK dependency to sun8i devfreq driver (Arnd
    Bergmann).
 
  - Add support for new layout of Psys PowerLimit Register on SPR to
    the Intel RAPL power capping driver (Zhang Rui).
 
  - Fix typo in a comment in idle_inject.c (Jason Wang).
 
  - Remove unused function definition from the DTPM (Dynamit Thermal
    Power Management) power capping framework (Daniel Lezcano).
 
  - Reduce DTPM trace verbosity (Daniel Lezcano).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmHcgkgSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxs34P/3kFhRk7qrwEekx6F11im6caLKT9+Qap
 PuGVqfTbK7TupVQDVGFBEjTjgKY7Ph7Fcr4bqn6wvNOp96cjXyOSk/c1fcpS3Bpr
 b1PYsFsb9diNKE462sGGYClyCT3X5qQqtpxzOl3g4I1PWKTC1mKFm4Jm2m6S6cFq
 DKhsgYKFzQSZNb1wJM4JjHS9c3BRygqp4nfEAmifu5b9tLZf7stWnFHhbGq63M9m
 OwHOrEEnzhf4pOXGZTvIXeczgE6IcuDdlGkIg7XMHnmKSNvj1HqhEgi2lfSRb98z
 5eI4S6JymCJGVK+gr8iVCq1iJ+LKqV3YPXRqvI35/+NqIKYxMt2ZivQQf5s3aQLe
 26gUulD3O6Pz5tMlwcDElD4/tcClfg35PCD/VzpRR8TAo8vLBb63kZ5v6+HM34ZJ
 6QbLTNZJTnGmEqxMccUxP+HhZz8ssqpLAC+R2sE5yXbNpIZq8CbPiGb65RGiX3SG
 CmRKqH/xQVNKBYP0ChjmUyhKcBxOnx1Xu8AhsN7gRAy0aht7j7OdjTnJuGiX6gu3
 Q5WxvVvkekyfhuFQ5TST9y/fzvMJWzeaA6GhVIr6RoBmshNQGTb0H4HXARxS3Ah5
 qjd7ao7BFLa898FCHaHIpmFWp0wF5iljwCJQVP3I2qUpPvDJxEtsxc4CF/AZzyNR
 VudoFqLoIV5C
 =1egI
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "The most signigicant change here is the addition of a new cpufreq
  'P-state' driver for AMD processors as a better replacement for the
  venerable acpi-cpufreq driver.

  There are also other cpufreq updates (in the core, intel_pstate, ARM
  drivers), PM core updates (mostly related to adding new macros for
  declaring PM operations which should make the lives of driver
  developers somewhat easier), and a bunch of assorted fixes and
  cleanups.

  Summary:

   - Add new P-state driver for AMD processors (Huang Rui).

   - Fix initialization of min and max frequency QoS requests in the
     cpufreq core (Rafael Wysocki).

   - Fix EPP handling on Alder Lake in intel_pstate (Srinivas
     Pandruvada).

   - Make intel_pstate update cpuinfo.max_freq when notified of HWP
     capabilities changes and drop a redundant function call from that
     driver (Rafael Wysocki).

   - Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel,
     Stephen Boyd, Vladimir Zapolskiy).

   - Fix double devm_remap() in the Mediatek cpufreq driver (Hector
     Yuan).

   - Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz
     Luba).

   - Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman).

   - Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman).

   - Fix two comments in cpuidle code (Jason Wang, Yang Li).

   - Allow model-specific normal EPB value to be used in the intel_epb
     sysfs attribute handling code (Srinivas Pandruvada).

   - Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki).

   - Add safety net to supplier device release in the runtime PM core
     code (Rafael Wysocki).

   - Capture device status before disabling runtime PM for it (Rafael
     Wysocki).

   - Add new macros for declaring PM operations to allow drivers to
     avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and
     update some drivers to use these macros (Paul Cercueil).

   - Allow ACPI hardware signature to be honoured during restore from
     hibernation (David Woodhouse).

   - Update outdated operating performance points (OPP) documentation
     (Tang Yizhou).

   - Reduce log severity for informative message regarding frequency
     transition failures in devfreq (Tzung-Bi Shih).

   - Add DRAM frequency controller devfreq driver for Allwinner sunXi
     SoCs (Samuel Holland).

   - Add missing COMMON_CLK dependency to sun8i devfreq driver (Arnd
     Bergmann).

   - Add support for new layout of Psys PowerLimit Register on SPR to
     the Intel RAPL power capping driver (Zhang Rui).

   - Fix typo in a comment in idle_inject.c (Jason Wang).

   - Remove unused function definition from the DTPM (Dynamit Thermal
     Power Management) power capping framework (Daniel Lezcano).

   - Reduce DTPM trace verbosity (Daniel Lezcano)"

* tag 'pm-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
  x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error
  cpufreq: amd-pstate: Fix Kconfig dependencies for AMD P-State
  cpufreq: amd-pstate: Fix struct amd_cpudata kernel-doc comment
  cpuidle: use default_groups in kobj_type
  x86: intel_epb: Allow model specific normal EPB value
  MAINTAINERS: Add AMD P-State driver maintainer entry
  Documentation: amd-pstate: Add AMD P-State driver introduction
  cpufreq: amd-pstate: Add AMD P-State performance attributes
  cpufreq: amd-pstate: Add AMD P-State frequencies attributes
  cpufreq: amd-pstate: Add boost mode support for AMD P-State
  cpufreq: amd-pstate: Add trace for AMD P-State module
  cpufreq: amd-pstate: Introduce the support for the processors with shared memory solution
  cpufreq: amd-pstate: Add fast switch function for AMD P-State
  cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors
  ACPI: CPPC: Add CPPC enable register function
  ACPI: CPPC: Check present CPUs for determining _CPC is valid
  ACPI: CPPC: Implement support for SystemIO registers
  x86/msr: Add AMD CPPC MSR definitions
  x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature flag
  cpufreq: use default_groups in kobj_type
  ...
 2022-01-10 20:34:00 -08:00
Linus Torvalds
8efd0d9c31 Networking changes for 5.17. 
Core
 ----
 
  - Defer freeing TCP skbs to the BH handler, whenever possible,
    or at least perform the freeing outside of the socket lock section
    to decrease cross-CPU allocator work and improve latency.
 
  - Add netdevice refcount tracking to locate sources of netdevice
    and net namespace refcount leaks.
 
  - Make Tx watchdog less intrusive - avoid pausing Tx and restarting
    all queues from a single CPU removing latency spikes.
 
  - Various small optimizations throughout the stack from Eric Dumazet.
 
  - Make netdev->dev_addr[] constant, force modifications to go via
    appropriate helpers to allow us to keep addresses in ordered data
    structures.
 
  - Replace unix_table_lock with per-hash locks, improving performance
    of bind() calls.
 
  - Extend skb drop tracepoint with a drop reason.
 
  - Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
 
 BPF
 ---
 
  - New helpers:
    - bpf_find_vma(), find and inspect VMAs for profiling use cases
    - bpf_loop(), runtime-bounded loop helper trading some execution
      time for much faster (if at all converging) verification
    - bpf_strncmp(), improve performance, avoid compiler flakiness
    - bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
      for tracing programs, all inlined by the verifier
 
  - Support BPF relocations (CO-RE) in the kernel loader.
 
  - Further the support for BTF_TYPE_TAG annotations.
 
  - Allow access to local storage in sleepable helpers.
 
  - Convert verifier argument types to a composable form with different
    attributes which can be shared across types (ro, maybe-null).
 
  - Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
    creating new, extensible ones where missing and deprecating those
    to be removed.
 
 Protocols
 ---------
 
  - WiFi (mac80211/cfg80211):
    - notify user space about long "come back in N" AP responses,
      allow it to react to such temporary rejections
    - allow non-standard VHT MCS 10/11 rates
    - use coarse time in airtime fairness code to save CPU cycles
 
  - Bluetooth:
    - rework of HCI command execution serialization to use a common
      queue and work struct, and improve handling errors reported
      in the middle of a batch of commands
    - rework HCI event handling to use skb_pull_data, avoiding packet
      parsing pitfalls
    - support AOSP Bluetooth Quality Report
 
  - SMC:
    - support net namespaces, following the RDMA model
    - improve connection establishment latency by pre-clearing buffers
    - introduce TCP ULP for automatic redirection to SMC
 
  - Multi-Path TCP:
    - support ioctls: SIOCINQ, OUTQ, and OUTQNSD
    - support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
      IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
    - support cmsgs: TCP_INQ
    - improvements in the data scheduler (assigning data to subflows)
    - support fastclose option (quick shutdown of the full MPTCP
      connection, similar to TCP RST in regular TCP)
 
  - MCTP (Management Component Transport) over serial, as defined by
    DMTF spec DSP0253 - "MCTP Serial Transport Binding".
 
 Driver API
 ----------
 
  - Support timestamping on bond interfaces in active/passive mode.
 
  - Introduce generic phylink link mode validation for drivers which
    don't have any quirks and where MAC capability bits fully express
    what's supported. Allow PCS layer to participate in the validation.
    Convert a number of drivers.
 
  - Add support to set/get size of buffers on the Rx rings and size of
    the tx copybreak buffer via ethtool.
 
  - Support offloading TC actions as first-class citizens rather than
    only as attributes of filters, improve sharing and device resource
    utilization.
 
  - WiFi (mac80211/cfg80211):
    - support forwarding offload (ndo_fill_forward_path)
    - support for background radar detection hardware
    - SA Query Procedures offload on the AP side
 
 New hardware / drivers
 ----------------------
 
  - tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
    real-time requirements for isochronous communication with protocols
    like OPC UA Pub/Sub.
 
  - Qualcomm BAM-DMUX WWAN - driver for data channels of modems
    integrated into many older Qualcomm SoCs, e.g. MSM8916 or
    MSM8974 (qcom_bam_dmux).
 
  - Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch
    driver with support for bridging, VLANs and multicast forwarding
    (lan966x).
 
  - iwlmei driver for co-operating between Intel's WiFi driver and
    Intel's Active Management Technology (AMT) devices.
 
  - mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
 
  - Bluetooth:
    - MediaTek MT7921 SDIO devices
    - Foxconn MT7922A
    - Realtek RTL8852AE
 
 Drivers
 -------
 
  - Significantly improve performance in the datapaths of:
    lan78xx, ax88179_178a, lantiq_xrx200, bnxt.
 
  - Intel Ethernet NICs:
    - igb: support PTP/time PEROUT and EXTTS SDP functions on
      82580/i354/i350 adapters
    - ixgbevf: new PF -> VF mailbox API which avoids the risk of
      mailbox corruption with ESXi
    - iavf: support configuration of VLAN features of finer granularity,
      stacked tags and filtering
    - ice: PTP support for new E822 devices with sub-ns precision
    - ice: support firmware activation without reboot
 
  - Mellanox Ethernet NICs (mlx5):
    - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
    - support TC forwarding when tunnel encap and decap happen between
      two ports of the same NIC
    - dynamically size and allow disabling various features to save
      resources for running in embedded / SmartNIC scenarios
 
  - Broadcom Ethernet NICs (bnxt):
    - use page frag allocator to improve Rx performance
    - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
 
  - Other Ethernet NICs:
    - amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
 
  - Microsoft cloud/virtual NIC (mana):
    - add XDP support (PASS, DROP, TX)
 
  - Mellanox Ethernet switches (mlxsw):
    - initial support for Spectrum-4 ASICs
    - VxLAN with IPv6 underlay
 
  - Marvell Ethernet switches (prestera):
    - support flower flow templates
    - add basic IP forwarding support
 
  - NXP embedded Ethernet switches (ocelot & felix):
    - support Per-Stream Filtering and Policing (PSFP)
    - enable cut-through forwarding between ports by default
    - support FDMA to improve packet Rx/Tx to CPU
 
  - Other embedded switches:
    - hellcreek: improve trapping management (STP and PTP) packets
    - qca8k: support link aggregation and port mirroring
 
  - Qualcomm 802.11ax WiFi (ath11k):
    - qca6390, wcn6855: enable 802.11 power save mode in station mode
    - BSS color change support
    - WCN6855 hw2.1 support
    - 11d scan offload support
    - scan MAC address randomization support
    - full monitor mode, only supported on QCN9074
    - qca6390/wcn6855: report signal and tx bitrate
    - qca6390: rfkill support
    - qca6390/wcn6855: regdb.bin support
 
  - Intel WiFi (iwlwifi):
    - support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
      in cooperation with the BIOS
    - support for Optimized Connectivity Experience (OCE) scan
    - support firmware API version 68
    - lots of preparatory work for the upcoming Bz device family
 
  - MediaTek WiFi (mt76):
    - Specific Absorption Rate (SAR) support
    - mt7921: 160 MHz channel support
 
  - RealTek WiFi (rtw88):
    - Specific Absorption Rate (SAR) support
    - scan offload
 
  - Other WiFi NICs
    - ath10k: support fetching (pre-)calibration data from nvmem
    - brcmfmac: configure keep-alive packet on suspend
    - wcn36xx: beacon filter support
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmHbkZAACgkQMUZtbf5S
 IruYkQ//XX7BggcwBfukPK83j0dONolClijqKcKR08g4vB5L8GXvv6OErKIWrh4k
 h8JanCH352ZkbCSw3MvFdm825UYQv8vPMd6Qks/LJ4aSKqCuy4MIlAo+yOw4Km3O
 i7++lRfma6DqHHI59wvLjWoxZSPu8lL+rI8UsZ5qMOlnNlGAOXsNrzRjaqQ3FddY
 AMxZeBUtrPqUCCQZFq3U8apkYzUp7CA/3XR9zRcja3uPbrtOV2G+4whRF90qGNWz
 Tm/QvJ9F/Ab292cbhxR4KuaQ3hUhaCQyDjbZk3+FZzZpAVhYTVqcNjny6+yXmbiP
 NXRtwemnl1NlWKMnJM8lEeY48u626tRIkxA/Wtd61uoO5uKUSxfGP+UpUi+DfXbF
 yIw50VQ7L2bpxXP/HjtmhVgZDaWKYyh22Zw4Hp/muMJz0hgUB0KODY3tf2jUWbjJ
 0oEgocWyzhhwMQKqupTDCIaRgIs2ewYr4ZrFDhI3HnHC/vv1VjoPRUPIyxwppD2N
 cXvZb3B1sWK8iX5gCbISGzyU4bB7I0rvJSTU42ueti7n6NqRFZ79qHQpYnnY+JdO
 z1qOwY/d/yWfBoXVKRtRg2qz6CdEt5BQklwAgVEBgrFpf58gp694EwGMb1htY14J
 r/k9bVpmyIFpUnBH2CPMRfBVA3tUTqzyzzFV4AMw40NYLKmhLdo=
 =KLm3
 -----END PGP SIGNATURE-----

Merge tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core
  ----

   - Defer freeing TCP skbs to the BH handler, whenever possible, or at
     least perform the freeing outside of the socket lock section to
     decrease cross-CPU allocator work and improve latency.

   - Add netdevice refcount tracking to locate sources of netdevice and
     net namespace refcount leaks.

   - Make Tx watchdog less intrusive - avoid pausing Tx and restarting
     all queues from a single CPU removing latency spikes.

   - Various small optimizations throughout the stack from Eric Dumazet.

   - Make netdev->dev_addr[] constant, force modifications to go via
     appropriate helpers to allow us to keep addresses in ordered data
     structures.

   - Replace unix_table_lock with per-hash locks, improving performance
     of bind() calls.

   - Extend skb drop tracepoint with a drop reason.

   - Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.

  BPF
  ---

   - New helpers:
      - bpf_find_vma(), find and inspect VMAs for profiling use cases
      - bpf_loop(), runtime-bounded loop helper trading some execution
        time for much faster (if at all converging) verification
      - bpf_strncmp(), improve performance, avoid compiler flakiness
      - bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
        for tracing programs, all inlined by the verifier

   - Support BPF relocations (CO-RE) in the kernel loader.

   - Further the support for BTF_TYPE_TAG annotations.

   - Allow access to local storage in sleepable helpers.

   - Convert verifier argument types to a composable form with different
     attributes which can be shared across types (ro, maybe-null).

   - Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
     creating new, extensible ones where missing and deprecating those
     to be removed.

  Protocols
  ---------

   - WiFi (mac80211/cfg80211):
      - notify user space about long "come back in N" AP responses,
        allow it to react to such temporary rejections
      - allow non-standard VHT MCS 10/11 rates
      - use coarse time in airtime fairness code to save CPU cycles

   - Bluetooth:
      - rework of HCI command execution serialization to use a common
        queue and work struct, and improve handling errors reported in
        the middle of a batch of commands
      - rework HCI event handling to use skb_pull_data, avoiding packet
        parsing pitfalls
      - support AOSP Bluetooth Quality Report

   - SMC:
      - support net namespaces, following the RDMA model
      - improve connection establishment latency by pre-clearing buffers
      - introduce TCP ULP for automatic redirection to SMC

   - Multi-Path TCP:
      - support ioctls: SIOCINQ, OUTQ, and OUTQNSD
      - support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
        IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
      - support cmsgs: TCP_INQ
      - improvements in the data scheduler (assigning data to subflows)
      - support fastclose option (quick shutdown of the full MPTCP
        connection, similar to TCP RST in regular TCP)

   - MCTP (Management Component Transport) over serial, as defined by
     DMTF spec DSP0253 - "MCTP Serial Transport Binding".

  Driver API
  ----------

   - Support timestamping on bond interfaces in active/passive mode.

   - Introduce generic phylink link mode validation for drivers which
     don't have any quirks and where MAC capability bits fully express
     what's supported. Allow PCS layer to participate in the validation.
     Convert a number of drivers.

   - Add support to set/get size of buffers on the Rx rings and size of
     the tx copybreak buffer via ethtool.

   - Support offloading TC actions as first-class citizens rather than
     only as attributes of filters, improve sharing and device resource
     utilization.

   - WiFi (mac80211/cfg80211):
      - support forwarding offload (ndo_fill_forward_path)
      - support for background radar detection hardware
      - SA Query Procedures offload on the AP side

  New hardware / drivers
  ----------------------

   - tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
     real-time requirements for isochronous communication with protocols
     like OPC UA Pub/Sub.

   - Qualcomm BAM-DMUX WWAN - driver for data channels of modems
     integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974
     (qcom_bam_dmux).

   - Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver
     with support for bridging, VLANs and multicast forwarding
     (lan966x).

   - iwlmei driver for co-operating between Intel's WiFi driver and
     Intel's Active Management Technology (AMT) devices.

   - mse102x - Vertexcom MSE102x Homeplug GreenPHY chips

   - Bluetooth:
      - MediaTek MT7921 SDIO devices
      - Foxconn MT7922A
      - Realtek RTL8852AE

  Drivers
  -------

   - Significantly improve performance in the datapaths of: lan78xx,
     ax88179_178a, lantiq_xrx200, bnxt.

   - Intel Ethernet NICs:
      - igb: support PTP/time PEROUT and EXTTS SDP functions on
        82580/i354/i350 adapters
      - ixgbevf: new PF -> VF mailbox API which avoids the risk of
        mailbox corruption with ESXi
      - iavf: support configuration of VLAN features of finer
        granularity, stacked tags and filtering
      - ice: PTP support for new E822 devices with sub-ns precision
      - ice: support firmware activation without reboot

   - Mellanox Ethernet NICs (mlx5):
      - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
      - support TC forwarding when tunnel encap and decap happen between
        two ports of the same NIC
      - dynamically size and allow disabling various features to save
        resources for running in embedded / SmartNIC scenarios

   - Broadcom Ethernet NICs (bnxt):
      - use page frag allocator to improve Rx performance
      - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool

   - Other Ethernet NICs:
      - amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support

   - Microsoft cloud/virtual NIC (mana):
      - add XDP support (PASS, DROP, TX)

   - Mellanox Ethernet switches (mlxsw):
      - initial support for Spectrum-4 ASICs
      - VxLAN with IPv6 underlay

   - Marvell Ethernet switches (prestera):
      - support flower flow templates
      - add basic IP forwarding support

   - NXP embedded Ethernet switches (ocelot & felix):
      - support Per-Stream Filtering and Policing (PSFP)
      - enable cut-through forwarding between ports by default
      - support FDMA to improve packet Rx/Tx to CPU

   - Other embedded switches:
      - hellcreek: improve trapping management (STP and PTP) packets
      - qca8k: support link aggregation and port mirroring

   - Qualcomm 802.11ax WiFi (ath11k):
      - qca6390, wcn6855: enable 802.11 power save mode in station mode
      - BSS color change support
      - WCN6855 hw2.1 support
      - 11d scan offload support
      - scan MAC address randomization support
      - full monitor mode, only supported on QCN9074
      - qca6390/wcn6855: report signal and tx bitrate
      - qca6390: rfkill support
      - qca6390/wcn6855: regdb.bin support

   - Intel WiFi (iwlwifi):
      - support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
        in cooperation with the BIOS
      - support for Optimized Connectivity Experience (OCE) scan
      - support firmware API version 68
      - lots of preparatory work for the upcoming Bz device family

   - MediaTek WiFi (mt76):
      - Specific Absorption Rate (SAR) support
      - mt7921: 160 MHz channel support

   - RealTek WiFi (rtw88):
      - Specific Absorption Rate (SAR) support
      - scan offload

   - Other WiFi NICs
      - ath10k: support fetching (pre-)calibration data from nvmem
      - brcmfmac: configure keep-alive packet on suspend
      - wcn36xx: beacon filter support"

* tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits)
  tcp: tcp_send_challenge_ack delete useless param `skb`
  net/qla3xxx: Remove useless DMA-32 fallback configuration
  rocker: Remove useless DMA-32 fallback configuration
  hinic: Remove useless DMA-32 fallback configuration
  lan743x: Remove useless DMA-32 fallback configuration
  net: enetc: Remove useless DMA-32 fallback configuration
  cxgb4vf: Remove useless DMA-32 fallback configuration
  cxgb4: Remove useless DMA-32 fallback configuration
  cxgb3: Remove useless DMA-32 fallback configuration
  bnx2x: Remove useless DMA-32 fallback configuration
  et131x: Remove useless DMA-32 fallback configuration
  be2net: Remove useless DMA-32 fallback configuration
  vmxnet3: Remove useless DMA-32 fallback configuration
  bna: Simplify DMA setting
  net: alteon: Simplify DMA setting
  myri10ge: Simplify DMA setting
  qlcnic: Simplify DMA setting
  net: allwinner: Fix print format
  page_pool: remove spinlock in page_pool_refill_alloc_cache()
  amt: fix wrong return type of amt_send_membership_update()
  ...
 2022-01-10 19:06:09 -08:00
Linus Torvalds
bfed6efb8e - Add support for handling hw errors in SGX pages: poisoning, recovering 
from poison memory and error injection into SGX pages
 
 - A bunch of changes to the SGX selftests to simplify and allow of SGX
 features testing without the need of a whole SGX software stack
 
 - Add a sysfs attribute which is supposed to show the amount of SGX
 memory in a NUMA node, similar to what /proc/meminfo is to normal
 memory
 
 - The usual bunch of fixes and cleanups too
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmHcDQMACgkQEsHwGGHe
 VUq42xAAjWM0AFpIxgUBpbE0swV3ZMulnndl3/vA5XN+9Yn7Q52+AFyPRE0s7Zam
 Ap+cInh2Il7d/sv54rZ4x/j7+TH4i7s8fWPVU/XiPALQuOuw0/B1wJJ+jmMiPFiU
 3jr7DkUPyWjWTHduMY/tk+xMOpkx1XsxJheYnKvsKVW+fjJ0vPuftAZtfu2z2VOh
 3JLcp5cAXPxW0UK9gdoF5bCBQhBu0NRguTbhHhbByAixQO2GyVSKLSRovUdj0a+y
 QRrQ6hgcvpTOsVHJoWJ7yIX4SBzQTe9Bg6dT9DghOxE4Sc2GH89hu7wRztGawBJO
 nLyzWgiW9ttjQutDpBvZANNVcFAPAdtDWczrzZpREbrGKkzT+kOBnIIL1LWITWOy
 2YWTO3ytW0KNIK85GzMjSVOKRMgaHJeBaGuYZ7Z0kb3GuUPJ9zRlaRxNapKQFuzA
 0PGoA4IDT+2Afy7VYBBNUA2d/WverFQuXKusSxK6b5zJ173o5/DXL2q0d3gn/j8Z
 hhxJUJyVOsfRXSG4NKrj4se4FiA0n/RL4oyUZR9iJ8kWzzZTd0eZTAn468bpGIp5
 yiOlPOLgsmu0xzVmAtG1+4d2+S2x+Ec5YE0sP1V/JLNciYk3Ebp7UyfnS3tn33Xc
 cpdWjELvD1LJVpMEURnbjRrwU6OiiAekYJCP/9lmK9zfOGpwRHc=
 =vFTM
 -----END PGP SIGNATURE-----

Merge tag 'x86_sgx_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 SGX updates from Borislav Petkov:

 - Add support for handling hw errors in SGX pages: poisoning,
   recovering from poison memory and error injection into SGX pages

 - A bunch of changes to the SGX selftests to simplify and allow of SGX
   features testing without the need of a whole SGX software stack

 - Add a sysfs attribute which is supposed to show the amount of SGX
   memory in a NUMA node, similar to what /proc/meminfo is to normal
   memory

 - The usual bunch of fixes and cleanups too

* tag 'x86_sgx_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/sgx: Fix NULL pointer dereference on non-SGX systems
  selftests/sgx: Fix corrupted cpuid macro invocation
  x86/sgx: Add an attribute for the amount of SGX memory in a NUMA node
  x86/sgx: Fix minor documentation issues
  selftests/sgx: Add test for multiple TCS entry
  selftests/sgx: Enable multiple thread support
  selftests/sgx: Add page permission and exception test
  selftests/sgx: Rename test properties in preparation for more enclave tests
  selftests/sgx: Provide per-op parameter structs for the test enclave
  selftests/sgx: Add a new kselftest: Unclobbered_vdso_oversubscribed
  selftests/sgx: Move setup_test_encl() to each TEST_F()
  selftests/sgx: Encpsulate the test enclave creation
  selftests/sgx: Dump segments and /proc/self/maps only on failure
  selftests/sgx: Create a heap for the test enclave
  selftests/sgx: Make data measurement for an enclave segment optional
  selftests/sgx: Assign source for each segment
  selftests/sgx: Fix a benign linker warning
  x86/sgx: Add check for SGX pages to ghes_do_memory_failure()
  x86/sgx: Add hook to error injection address validation
  x86/sgx: Hook arch_memory_failure() into mainline code
  ...
 2022-01-10 09:44:09 -08:00
Rafael J. Wysocki
c001a52df4 Merge branches 'pm-cpuidle', 'pm-core' and 'pm-sleep' 
Merge cpuidle updates, PM core updates and one hiberation-related
update for 5.17-rc1:

 - Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman).

 - Fix two comments in cpuidle code (Jason Wang, Yang Li).

 - Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki).

 - Add safety net to supplier device release in the runtime PM core
   code (Rafael Wysocki).

 - Capture device status before disabling runtime PM for it (Rafael
   Wysocki).

 - Add new macros for declaring PM operations to allow drivers to
   avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and
   update some drivers to use these macros (Paul Cercueil).

 - Allow ACPI hardware signature to be honoured during restore from
   hibernation (David Woodhouse).

* pm-cpuidle:
  cpuidle: use default_groups in kobj_type
  cpuidle: Fix cpuidle_remove_state_sysfs() kerneldoc comment
  cpuidle: menu: Fix typo in a comment

* pm-core:
  PM: runtime: Simplify locking in pm_runtime_put_suppliers()
  mmc: mxc: Use the new PM macros
  mmc: jz4740: Use the new PM macros
  PM: runtime: Add safety net to supplier device release
  PM: runtime: Capture device status before disabling runtime PM
  PM: core: Add new *_PM_OPS macros, deprecate old ones
  PM: core: Redefine pm_ptr() macro
  r8169: Avoid misuse of pm_ptr() macro

* pm-sleep:
  PM: hibernate: Allow ACPI hardware signature to be honoured
 2022-01-10 17:57:13 +01:00
Rafael J. Wysocki
5561f25beb Merge branch 'pm-cpufreq' 
Merge cpufreq updates for 5.17-rc1:

 - Add new P-state driver for AMD processors (Huang Rui).

 - Fix initialization of min and max frequency QoS requests in the
   cpufreq core (Rafael Wysocki).

 - Fix EPP handling on Alder Lake in intel_pstate (Srinivas Pandruvada).

 - Make intel_pstate update cpuinfo.max_freq when notified of HWP
   capabilities changes and drop a redundant function call from that
   driver (Rafael Wysocki).

 - Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel,
   Stephen Boyd, Vladimir Zapolskiy).

 - Fix double devm_remap() in the Mediatek cpufreq driver (Hector Yuan).

 - Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz
   Luba).

 - Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman).

* pm-cpufreq: (32 commits)
  x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error
  cpufreq: amd-pstate: Fix Kconfig dependencies for AMD P-State
  cpufreq: amd-pstate: Fix struct amd_cpudata kernel-doc comment
  MAINTAINERS: Add AMD P-State driver maintainer entry
  Documentation: amd-pstate: Add AMD P-State driver introduction
  cpufreq: amd-pstate: Add AMD P-State performance attributes
  cpufreq: amd-pstate: Add AMD P-State frequencies attributes
  cpufreq: amd-pstate: Add boost mode support for AMD P-State
  cpufreq: amd-pstate: Add trace for AMD P-State module
  cpufreq: amd-pstate: Introduce the support for the processors with shared memory solution
  cpufreq: amd-pstate: Add fast switch function for AMD P-State
  cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors
  ACPI: CPPC: Add CPPC enable register function
  ACPI: CPPC: Check present CPUs for determining _CPC is valid
  ACPI: CPPC: Implement support for SystemIO registers
  x86/msr: Add AMD CPPC MSR definitions
  x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature flag
  cpufreq: use default_groups in kobj_type
  cpufreq: mediatek-hw: Fix double devm_remap in hotplug case
  cpufreq: intel_pstate: Update cpuinfo.max_freq on HWP_CAP changes
  ...
 2022-01-10 17:54:45 +01:00
Masahiro Yamada
129ab0d2d9 kbuild: do not quote string values in include/config/auto.conf 
The previous commit fixed up all shell scripts to not include
include/config/auto.conf.

Now that include/config/auto.conf is only included by Makefiles,
we can change it into a more Make-friendly form.

Previously, Kconfig output string values enclosed with double-quotes
(both in the .config and include/config/auto.conf):

    CONFIG_X="foo bar"

Unlike shell, Make handles double-quotes (and single-quotes as well)
verbatim. We must rip them off when used.

There are some patterns:

  [1] $(patsubst "%",%,$(CONFIG_X))
  [2] $(CONFIG_X:"%"=%)
  [3] $(subst ",,$(CONFIG_X))
  [4] $(shell echo $(CONFIG_X))

These are not only ugly, but also fragile.

[1] and [2] do not work if the value contains spaces, like
   CONFIG_X=" foo bar "

[3] does not work correctly if the value contains double-quotes like
   CONFIG_X="foo\"bar"

[4] seems to work better, but has a cost of forking a process.

Anyway, quoted strings were always PITA for our Makefiles.

This commit changes Kconfig to stop quoting in include/config/auto.conf.

These are the string type symbols referenced in Makefiles or scripts:

    ACPI_CUSTOM_DSDT_FILE
    ARC_BUILTIN_DTB_NAME
    ARC_TUNE_MCPU
    BUILTIN_DTB_SOURCE
    CC_IMPLICIT_FALLTHROUGH
    CC_VERSION_TEXT
    CFG80211_EXTRA_REGDB_KEYDIR
    EXTRA_FIRMWARE
    EXTRA_FIRMWARE_DIR
    EXTRA_TARGETS
    H8300_BUILTIN_DTB
    INITRAMFS_SOURCE
    LOCALVERSION
    MODULE_SIG_HASH
    MODULE_SIG_KEY
    NDS32_BUILTIN_DTB
    NIOS2_DTB_SOURCE
    OPENRISC_BUILTIN_DTB
    SOC_CANAAN_K210_DTB_SOURCE
    SYSTEM_BLACKLIST_HASH_LIST
    SYSTEM_REVOCATION_KEYS
    SYSTEM_TRUSTED_KEYS
    TARGET_CPU
    UNUSED_KSYMS_WHITELIST
    XILINX_MICROBLAZE0_FAMILY
    XILINX_MICROBLAZE0_HW_VER
    XTENSA_VARIANT_NAME

I checked them one by one, and fixed up the code where necessary.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
 2022-01-08 18:03:57 +09:00
Mark Brown
b56a7cbf40
regmap: debugfs: Fix indentation 
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220107191145.813876-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
 2022-01-07 19:16:23 +00:00
Fabio Estevam
530792efa6
regmap: Call regmap_debugfs_exit() prior to _init() 
Since commit cffa4b2122 ("regmap: debugfs: Fix a memory leak when
calling regmap_attach_dev"), the following debugfs error is seen
on i.MX boards:

debugfs: Directory 'dummy-iomuxc-gpr@20e0000' with parent 'regmap' already present!

In the attempt to fix the memory leak, the above commit added a NULL check
for map->debugfs_name. For the first debufs entry, map->debugfs_name is NULL
and then the new name is allocated via kasprintf().

For the second debugfs entry, map->debugfs_name() is no longer NULL, so
it will keep using the old entry name and the duplicate name error is seen.

Quoting Mark Brown:

"That means that if the device gets freed we'll end up with the old debugfs
file hanging around pointing at nothing.
...
To be more explicit this means we need a call to regmap_debugfs_exit()
which will clean up all the existing debugfs stuff before we loose
references to it."

Call regmap_debugfs_exit() prior to regmap_debugfs_init() to fix
the problem.

Tested on i.MX6Q and i.MX6SX boards.

Fixes: cffa4b2122 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev")
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20220107163307.335404-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
 2022-01-07 17:14:29 +00:00
Lu Baolu
00eb74ea2c driver core: Make bus notifiers in right order in really_probe() 
If a driver cannot be bound to a device, the correct bus notifier order
should be:

 - BUS_NOTIFY_BIND_DRIVER: driver is about to be bound
 - BUS_NOTIFY_DRIVER_NOT_BOUND: driver failed to be bound

or no notifier if the failure happens before the actual binding.

The really_probe() notifies a BUS_NOTIFY_DRIVER_NOT_BOUND event without
a BUS_NOTIFY_BIND_DRIVER if .dma_configure() returns failure. This
change makes the notifiers in order.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20211231033901.2168664-3-baolu.lu@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2022-01-06 15:47:41 +01:00
Lu Baolu
885e50253b driver core: Move driver_sysfs_remove() after driver_sysfs_add() 
The driver_sysfs_remove() should be called after driver_sysfs_add() in
really_probe(). The out-of-order driver_sysfs_remove() tries to remove
some nonexistent nodes under the device and driver sysfs nodes. This is
allowed, hence this change doesn't fix any problem, just a cleanup.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20211231033901.2168664-2-baolu.lu@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2022-01-06 15:47:41 +01:00
Ingo Molnar
f083266487 headers/uninline: Uninline single-use function: kobject_has_children() 
This was the only usage of <linux/kref_api.h> in <linux/kobject_api.h>,
so we'll able to decouple the two after this change.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2022-01-04 14:36:06 +01:00
Greg Kroah-Hartman
824adf37ee Merge 5.16-rc8 into char-misc-next 
We need the fixes in here as well for testing.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2022-01-03 13:44:38 +01:00
Jakub Kicinski
aec53e60e0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
  commit 077cdda764 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
  commit 31108d142f ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
  commit 4390c6edc0 ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
  https://lore.kernel.org/all/20211229065352.30178-1-saeed@kernel.org/

net/smc/smc_wr.c
  commit 49dc9013e3 ("net/smc: Use the bitmap API when applicable")
  commit 349d43127d ("net/smc: fix kernel panic caused by race of smc_sock")
  bitmap_zero()/memset() is removed by the fix

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2021-12-30 12:12:12 -08:00
Kees Cook
28f0c335dd devtmpfs: mount with noexec and nosuid 
devtmpfs is writable. Add the noexec and nosuid as default mount flags
to prevent code execution from /dev. The systems who don't use systemd
and who rely on CONFIG_DEVTMPFS_MOUNT=y are the ones to be protected by
this patch. Other systems are fine with the udev solution.

No sane program should be relying on executing from /dev. So this patch
reduces the attack surface. It doesn't prevent any specific attack, but
it reduces the possibility that someone can use /dev as a place to put
executable code. Chrome OS has been carrying this patch for several
years. It seems trivial and simple solution to improve the protection of
/dev when CONFIG_DEVTMPFS_MOUNT=y.

Original patch:
https://lore.kernel.org/lkml/20121120215059.GA1859@www.outflux.net/

Cc: ellyjones@chromium.org
Cc: Kay Sievers <kay@vrfy.org>
Cc: Roland Eggner <edvx1@systemanalysen.net>
Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/YcMfDOyrg647RCmd@debian-BULLSEYE-live-builder-AMD64
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2021-12-30 13:54:42 +01:00
Mark-PK Tsai
67aa58e8d4 driver core: Simplify async probe test code by using ktime_ms_delta() 
Simplify async probe test code by using ktime_ms_delta().

Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Link: https://lore.kernel.org/r/20211228092707.29987-1-mark-pk.tsai@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2021-12-29 10:57:22 +01:00
Greg Kroah-Hartman
cf6299b610 kobject: remove kset from struct kset_uevent_ops callbacks 
There is no need to pass the pointer to the kset in the struct
kset_uevent_ops callbacks as no one uses it, so just remove that pointer
entirely.

Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Wedson Almeida Filho <wedsonaf@google.com>
Link: https://lore.kernel.org/r/20211227163924.3970661-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2021-12-28 11:26:18 +01:00
Wedson Almeida Filho
ee6d3dd4ed driver core: make kobj_type constant. 
This way instances of kobj_type (which contain function pointers) can be
stored in .rodata, which means that they cannot be [easily/accidentally]
modified at runtime.

Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Link: https://lore.kernel.org/r/20211224231345.777370-1-wedsonaf@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2021-12-27 10:40:00 +01:00
Rafael J. Wysocki
50a4606655 PM: runtime: Simplify locking in pm_runtime_put_suppliers() 
Notice that pm_runtime_put_suppliers() cannot be called with
disabled interrupts, because it may sleep (due to the device
links read locking in the non-SRCU case), and so it can use
spin_lock_irq() and spin_unlock_irq() for the locking.

Update the function accordingly and while at it move the "put"
local variable in it into the inner block where it is used.

This change is not expected to have any visible functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
 2021-12-22 18:37:55 +01:00
Rafael J. Wysocki
e4719b52b1 Merge back PM core changes for v5.17. 2021-12-22 18:37:12 +01:00
Clément Léger
c5fc5ba8b6 software node: fix wrong node passed to find nargs_prop 
nargs_prop refers to a property located in the reference that is found
within the nargs property. Use the correct reference node in call to
property_entry_read_int_array() to retrieve the correct nargs value.

Fixes: b06184acf7 ("software node: Add software_node_get_reference_args()")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2021-12-22 18:26:18 +01:00
Johan Hovold
67e532a42c driver core: platform: document registration-failure requirement 
Add an explicit comment to document that the reference initialised by
platform_device_register() needs to be released by a call to
platform_device_put() also when registration fails (cf.
device_register()).

Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211222104213.5673-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2021-12-22 13:59:33 +01:00
Anand Ashok Dumbre
eca6e2d4a4 device property: Add fwnode_iomap() 
This patch introduces a new helper routine - fwnode_iomap(), which
allows to map the memory mapped IO for a given device node.

This implementation does not cover the ACPI case and may be expanded
in the future. The main purpose here is to be able to develop resource
provider agnostic drivers.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20211203212358.31444-2-anand.ashok.dumbre@xilinx.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
 2021-12-21 15:10:09 +00:00
Sakari Ailus
c49eea6ffe device property: Drop fwnode_graph_get_remote_node() 
fwnode_graph_get_remote_node() is only used by the tegra-video driver.
Convert it to use newer fwnode_graph_get_endpoint_by_id() and drop
now-unused fwnode_graph_get_remote_node().

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2021-12-17 18:41:29 +01:00
Sakari Ailus
0d82017b70 device property: Use fwnode_graph_for_each_endpoint() macro 
Now that we have fwnode_graph_for_each_endpoint() macro, use it instead of
calling fwnode_graph_get_next_endpoint() directly. It manages the iterator
variable for the user without manual intervention.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2021-12-17 18:41:29 +01:00
Sakari Ailus
c87b8fc569 device property: Implement fwnode_graph_get_endpoint_count() 
Add fwnode_graph_get_endpoint_count() function to provide generic
implementation of of_graph_get_endpoint_count(). The former by default
only counts endpoints to available devices which is consistent with the
rest of the fwnode graph API. By providing FWNODE_GRAPH_DEVICE_DISABLED
flag, also unconnected endpoints and endpoints to disabled devices are
counted.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2021-12-17 18:41:29 +01:00
Sakari Ailus
49f39cb0ef device property: Fix documentation for FWNODE_GRAPH_DEVICE_DISABLED 
FWNODE_GRAPH_DEVICE_DISABLED flag was meant for also returning endpoints
connected to disabled devices, but it also may return endpoints that are
not connected. Fix this in documentation. Also
fwnode_graph_get_endpoint_by_id() was affeced by this.

Also improve the language a little bit.

Fixes: 0fcc2bdc8a ("device property: Add fwnode_graph_get_endpoint_by_id()")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2021-12-17 18:41:29 +01:00
Sakari Ailus
4a7f4110f7 device property: Fix fwnode_graph_devcon_match() fwnode leak 
For each endpoint it encounters, fwnode_graph_devcon_match() checks
whether the endpoint's remote port parent device is available. If it is
not, it ignores the endpoint but does not put the reference to the remote
endpoint port parent fwnode. For available devices the fwnode handle
reference is put as expected.

Put the reference for unavailable devices now.

Fixes: 637e9e52b1 ("device connection: Find device connections also from device graphs")
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2021-12-17 18:41:28 +01:00
Rafael J. Wysocki
544e737dea PM: sleep: Fix error handling in dpm_prepare() 
Commit 2aa36604e8 ("PM: sleep: Avoid calling put_device() under
dpm_list_mtx") forgot to update the while () loop termination
condition to also break the loop if error is nonzero, which
causes the loop to become infinite if device_prepare() returns
an error for one device.

Add the missing !error check.

Fixes: 2aa36604e8 ("PM: sleep: Avoid calling put_device() under dpm_list_mtx")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
 2021-12-17 18:36:08 +01:00
Rafael J. Wysocki
d1579e6119 PM: runtime: Add safety net to supplier device release 
Because refcount_dec_not_one() returns true if the target refcount
becomes saturated, it is generally unsafe to use its return value as
a loop termination condition, but that is what happens when a device
link's supplier device is released during runtime PM suspend
operations and on device link removal.

To address this, introduce pm_runtime_release_supplier() to be used
in the above cases which will check the supplier device's runtime
PM usage counter in addition to the refcount_dec_not_one() return
value, so the loop can be terminated in case the rpm_active refcount
value becomes invalid, and update the code in question to use it as
appropriate.

This change is not expected to have any visible functional impact.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
 2021-12-17 16:25:14 +01:00
Rafael J. Wysocki
c24efa6732 PM: runtime: Capture device status before disabling runtime PM 
In some cases (for example, during system-wide suspend and resume of
devices) it is useful to know whether or not runtime PM has ever been
enabled for a given device and, if so, what the runtime PM status of
it had been right before runtime PM was disabled for it last time.

For this reason, introduce a new struct dev_pm_info field called
last_status that will be used for capturing the runtime PM status of
the device when its power.disable_depth counter changes from 0 to 1.

The new field will be set to RPM_INVALID to start with and whenever
power.disable_depth changes from 1 to 0, so it will be valid only
when runtime PM of the device is currently disabled, but it has been
enabled at least once.

Immediately use power.last_status in rpm_resume() to make it handle
the case when PM runtime is disabled for the device, but its runtime
PM status is RPM_ACTIVE more consistently.  Namely, make it return 1
if power.last_status is also equal to RPM_ACTIVE in that case (the
idea being that if the status was RPM_ACTIVE last time when
power.disable_depth was changing from 0 to 1 and it is still
RPM_ACTIVE, it can be assumed to reflect what happened to the device
last time when it was using runtime PM) and -EACCES otherwise.

Update the documentation to provide a description of last_status and
change the description of pm_runtime_resume() in it to reflect the
new behavior of rpm_active().

While at it, rearrange the code in pm_runtime_enable() to be more
straightforward and replace the WARN() macro in it with a pr_warn()
invocation which is less disruptive.

Link: https://lore.kernel.org/linux-pm/20211026222626.39222-1-ulf.hansson@linaro.org/t/#u
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2021-12-17 16:16:40 +01:00
Thomas Gleixner
a80713fea3 platform-msi: Simplify platform device MSI code 
The allocation code is overly complex. It tries to have the MSI index space
packed, which is not working when an interrupt is freed. There is no
requirement for this. The only requirement is that the MSI index is unique.

Move the MSI descriptor allocation into msi_domain_populate_irqs() and use
the Linux interrupt number as MSI index which fulfils the unique
requirement.

This requires to lock the MSI descriptors which makes the lock order
reverse to the regular MSI alloc/free functions vs. the domain
mutex. Assign a seperate lockdep class for these MSI device domains.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20211206210748.956731741@linutronix.de
 2021-12-16 22:22:19 +01:00
Thomas Gleixner
653b50c5f9 platform-msi: Let core code handle MSI descriptors 
Use the core functionality for platform MSI interrupt domains. The platform
device MSI interrupt domains will be converted in a later step.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20211206210748.903173257@linutronix.de
 2021-12-16 22:22:19 +01:00
Thomas Gleixner
125282cd4f genirq/msi: Move descriptor list to struct msi_device_data 
It's only required when MSI is in use.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20211206210747.650487479@linutronix.de
 2021-12-16 22:22:16 +01:00
Thomas Gleixner
dba27c7fa3 platform-msi: Use msi_desc::msi_index 
Use the common msi_index member and get rid of the pointless wrapper struct.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20211210221814.413638645@linutronix.de
 2021-12-16 22:16:40 +01:00
Thomas Gleixner
fc22e7dbcd platform-msi: Store platform private data pointer in msi_device_data 
Storing the platform private data in a MSI descriptor is sloppy at
best. The data belongs to the device and not to the descriptor.
Add a pointer to struct msi_device_data and store the pointer there.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20211210221814.287680528@linutronix.de
 2021-12-16 22:16:39 +01:00
Thomas Gleixner
9835cec6d5 platform-msi: Rename functions and clarify comments 
It's hard to distinguish what platform_msi_domain_alloc() and
platform_msi_domain_alloc_irqs() are about. Make the distinction more
explicit and add comments which explain the use cases properly.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20211210221814.228706214@linutronix.de
 2021-12-16 22:16:39 +01:00