The previous patch to ignore STT_SECTION symbols only added the ignore
condition in one of them. This fails if there's more than one map
definition in the 'maps' section, because the subsequent modulus check will
fail, resulting in error messages like:
libbpf: elf: unable to determine legacy map definition size in ./xdpdump_xdp.o
Fix this by also ignoring STT_SECTION in the first loop.
Fixes: c3e8c44a90 ("libbpf: Ignore STT_SECTION symbols in 'maps' section")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210929213837.832449-1-toke@redhat.com
We have a unit test that invokes an XDP program with 1m different
inputs, aka 1m BPF_PROG_RUN syscalls. We run this test concurrently
with slight variations in how we generated the input.
Since commit f23c4b3924 ("bpf: Start using the BPF dispatcher in BPF_TEST_RUN")
the unit test has slowed down significantly. Digging deeper reveals that
the concurrent tests are serialised in the kernel on the XDP dispatcher.
This is a global resource that is protected by a mutex, on which we contend.
Fix this by not calling into the XDP dispatcher if we only want to perform
a single run of the BPF program.
See: https://lore.kernel.org/bpf/CACAyw9_y4QumOW35qpgTbLsJ532uGq-kVW-VESJzGyiZkypnvw@mail.gmail.com/
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210928093100.27124-1-lmb@cloudflare.com
Cleanup code uses while (cpu++ < cpu_cnt) for closing fds, which means
it starts iterating from 1 for closing fds. If the first fd is -1, it
skips over it and closes garbage fds (typically zero) in the remaining
array. This leads to test failures for future tests when they end up
storing fd 0 (as the slot becomes free due to close(0)) in ldimm64's BTF
fd, ending up trying to match module BTF id with vmlinux.
This was observed as spurious CI failure for the ksym_module_libbpf and
module_attach tests. The test ends up closing fd 0 and breaking libbpf's
assumption that module BTF fd will always be > 0, which leads to the
kernel thinking that we are pointing to a BTF ID in vmlinux BTF.
Fixes: 025bd7c753 (selftests/bpf: Add test for bpf_get_branch_snapshot)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210927145941.1383001-12-memxor@gmail.com
Fix a build error with clang in __xp_alloc():
[...]
net/xdp/xsk_buff_pool.c:465:15: error: variable 'xskb' is uninitialized
when used here [-Werror,-Wuninitialized]
xp_release(xskb);
^~~~
This is correctly detected by clang, but not gcc. In fact, the xp_release()
statement should not be there at all in the refactored code, just remove it.
Fixes: 94033cd8e7 ("xsk: Optimize for aligned case")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210929061403.8587-1-magnus.karlsson@gmail.com
clang build kernel failed the selftest probe_user.
$ ./test_progs -t probe_user
$ ...
$ test_probe_user:PASS:get_kprobe_res 0 nsec
$ test_probe_user:FAIL:check_kprobe_res wrong kprobe res from probe read: 0.0.0.0:0
$ #94 probe_user:FAIL
The test attached to kernel function __sys_connect(). In net/socket.c, we have
int __sys_connect(int fd, struct sockaddr __user *uservaddr, int addrlen)
{
......
}
...
SYSCALL_DEFINE3(connect, int, fd, struct sockaddr __user *, uservaddr,
int, addrlen)
{
return __sys_connect(fd, uservaddr, addrlen);
}
The gcc compiler (8.5.0) does not inline __sys_connect() in syscall entry
function. But latest clang trunk did the inlining. So the bpf program
is not triggered.
To make the test more reliable, let us kprobe the syscall entry function
instead. Note that x86_64, arm64 and s390 have syscall wrappers and they have
to be handled specially.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210929033000.3711921-1-yhs@fb.com
Kees Cook says:
====================
Hi,
In order to keep ahead of cases in the kernel where Control Flow Integrity
(CFI) may trip over function call casts, enabling -Wcast-function-type
is helpful. To that end, replace BPF_CAST_CALL() as it triggers warnings
with this option and is now one of the last places in the kernel in need
of fixing.
Thanks,
-Kees
v2:
- rebase to bpf-next
- add acks
v1: https://lore.kernel.org/lkml/20210927182700.2980499-1-keescook@chromium.org
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In order to keep ahead of cases in the kernel where Control Flow
Integrity (CFI) may trip over function call casts, enabling
-Wcast-function-type is helpful. To that end, BPF_CAST_CALL causes
various warnings and is one of the last places in the kernel
triggering this warning.
For actual function calls, replace BPF_CAST_CALL() with a typedef, which
captures the same details about the given function pointers.
This change results in no object code difference.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://github.com/KSPP/linux/issues/20
Link: https://lore.kernel.org/lkml/CAEf4Bzb46=-J5Fxc3mMZ8JQPtK1uoE0q6+g6WPz53Cvx=CBEhw@mail.gmail.com
Link: https://lore.kernel.org/bpf/20210928230946.4062144-3-keescook@chromium.org
In order to keep ahead of cases in the kernel where Control Flow
Integrity (CFI) may trip over function call casts, enabling
-Wcast-function-type is helpful. To that end, BPF_CAST_CALL causes
various warnings and is one of the last places in the kernel triggering
this warning.
Most places using BPF_CAST_CALL actually just want a void * to perform
math on. It's not actually performing a call, so just use a different
helper to get the void *, by way of the new BPF_CALL_IMM() helper, which
can clean up a common copy/paste idiom as well.
This change results in no object code difference.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://github.com/KSPP/linux/issues/20
Link: https://lore.kernel.org/lkml/CAEf4Bzb46=-J5Fxc3mMZ8JQPtK1uoE0q6+g6WPz53Cvx=CBEhw@mail.gmail.com
Link: https://lore.kernel.org/bpf/20210928230946.4062144-2-keescook@chromium.org
"?:" is a GNU C extension, some environment has warning flags for its
use, or even prohibit it directly. This patch avoid triggering these
problems by simply expand it to its full form, no functionality change.
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210928184221.1545079-1-fallentree@fb.com
Andrii Nakryiko says:
====================
Implement opt-in stricter BPF program section name (SEC()) handling logic. For
a lot of supported ELF section names, enforce exact section name match with no
arbitrary characters added at the end. See patch #9 for more details.
To allow this, patches #2 through #4 clean up and preventively fix selftests,
normalizing existing SEC() usage across multiple selftests. While at it, those
patches also reduce the amount of remaining bpf_object__find_program_by_title()
uses, which should be completely removed soon, given it's an API with
ambiguous semantics and will be deprecated and eventually removed in libbpf 1.0.
Patch #1 also introduces SEC("tc") as an alias for SEC("classifier"). "tc" is
a better and less misleading name, so patch #3 replaces all classifier* uses
with nice and short SEC("tc").
Last patch is also fixing "sk_lookup/" definition to not require and not allow
extra "/blah" parts after it, which serve no meaning.
All the other patches are gradual internal libbpf changes to:
- allow this optional strict logic for ELF section name handling;
- allow new use case (for now for "struct_ops", but that could be extended
to, say, freplace definitions), in which it can be used stand-alone to
specify just type (SEC("struct_ops")), or also accept extra parameters
which can be utilized by libbpf to either get more data or double-check
valid use (e.g., SEC("struct_ops/dctcp_init") to specify desired
struct_ops operation that is supposed to be implemented);
- get libbpf's internal logic ready to allow other libraries and
applications to specify their custom handlers for ELF section name for BPF
programs. All the pieces are in place, the only thing preventing making
this as public libbpf API is reliance on internal type for specifying BPF
program load attributes. The work is planned to revamp related low-level
libbpf APIs, at which point it will be possible to just re-use such new
types for coordination between libbpf and custom handlers.
These changes are a part of libbpf 1.0 effort ([0]). They are also intended to
be applied on top of the previous preparatory series [1], so currently CI will
be failing to apply them to bpf-next until that patch set is landed. Once it
is landed, kernel-patches daemon will automatically retest this patch set.
[0] https://github.com/libbpf/libbpf/wiki/Libbpf:-the-road-to-v1.0#stricter-and-more-uniform-bpf-program-section-name-sec-handling
[1] https://patchwork.kernel.org/project/netdevbpf/list/?series=547675&state=*
v3->v4:
- replace SEC("classifier*") with SEC("tc") (Daniel);
v2->v3:
- applied acks, addressed most feedback, added comments to new flags (Dave);
v1->v2:
- rebase onto latest bpf-next and resolve merge conflicts w/ Dave's changes.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Update "sk_lookup/" definition to be a stand-alone type specifier,
with backwards-compatible prefix match logic in non-libbpf-1.0 mode.
Currently in selftests all the "sk_lookup/<whatever>" uses just use
<whatever> for duplicated unique name encoding, which is redundant as
BPF program's name (C function name) uniquely and descriptively
identifies the intended use for such BPF programs.
With libbpf's SEC_DEF("sk_lookup") definition updated, switch existing
sk_lookup programs to use "unqualified" SEC("sk_lookup") section names,
with no random text after it.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-11-andrii@kernel.org
Implement strict ELF section name handling for BPF programs. It utilizes
`libbpf_set_strict_mode()` framework and adds new flag: LIBBPF_STRICT_SEC_NAME.
If this flag is set, libbpf will enforce exact section name matching for
a lot of program types that previously allowed just partial prefix
match. E.g., if previously SEC("xdp_whatever_i_want") was allowed, now
in strict mode only SEC("xdp") will be accepted, which makes SEC("")
definitions cleaner and more structured. SEC() now won't be used as yet
another way to uniquely encode BPF program identifier (for that
C function name is better and is guaranteed to be unique within
bpf_object). Now SEC() is strictly BPF program type and, depending on
program type, extra load/attach parameter specification.
Libbpf completely supports multiple BPF programs in the same ELF
section, so multiple BPF programs of the same type/specification easily
co-exist together within the same bpf_object scope.
Additionally, a new (for now internal) convention is introduced: section
name that can be a stand-alone exact BPF program type specificator, but
also could have extra parameters after '/' delimiter. An example of such
section is "struct_ops", which can be specified by itself, but also
allows to specify the intended operation to be attached to, e.g.,
"struct_ops/dctcp_init". Note, that "struct_ops_some_op" is not allowed.
Such section definition is specified as "struct_ops+".
This change is part of libbpf 1.0 effort ([0], [1]).
[0] Closes: https://github.com/libbpf/libbpf/issues/271
[1] https://github.com/libbpf/libbpf/wiki/Libbpf:-the-road-to-v1.0#stricter-and-more-uniform-bpf-program-section-name-sec-handling
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-10-andrii@kernel.org
Complete SEC() table refactoring towards unified form by rewriting
BPF_APROG_SEC and BPF_EAPROG_SEC definitions with
SEC_DEF(SEC_ATTACHABLE_OPT) (for optional expected_attach_type) and
SEC_DEF(SEC_ATTACHABLE) (mandatory expected_attach_type), respectively.
Drop BPF_APROG_SEC, BPF_EAPROG_SEC, and BPF_PROG_SEC_IMPL macros after
that, leaving SEC_DEF() macro as the only one used.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-9-andrii@kernel.org
Refactor ELF section handler definitions table to use a set of flags and
unified SEC_DEF() macro. This allows for more succinct and table-like
set of definitions, and allows to more easily extend the logic without
adding more verbosity (this is utilized in later patches in the series).
This approach is also making libbpf-internal program pre-load callback
not rely on bpf_sec_def definition, which demonstrates that future
pluggable ELF section handlers will be able to achieve similar level of
integration without libbpf having to expose extra types and APIs.
For starters, update SEC_DEF() definitions and make them more succinct.
Also convert BPF_PROG_SEC() and BPF_APROG_COMPAT() definitions to
a common SEC_DEF() use.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-8-andrii@kernel.org
Move closer to not relying on bpf_sec_def internals that won't be part
of public API, when pluggable SEC() handlers will be allowed. Drop
pre-calculated prefix length, and in various helpers don't rely on this
prefix length availability. Also minimize reliance on knowing
bpf_sec_def's prefix for few places where section prefix shortcuts are
supported (e.g., tp vs tracepoint, raw_tp vs raw_tracepoint).
Given checking some string for having a given string-constant prefix is
such a common operation and so annoying to be done with pure C code, add
a small macro helper, str_has_pfx(), and reuse it throughout libbpf.c
where prefix comparison is performed. With __builtin_constant_p() it's
possible to have a convenient helper that checks some string for having
a given prefix, where prefix is either string literal (or compile-time
known string due to compiler optimization) or just a runtime string
pointer, which is quite convenient and saves a lot of typing and string
literal duplication.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-7-andrii@kernel.org
Refactor internals of libbpf to allow adding custom SEC() handling logic
easily from outside of libbpf. To that effect, each SEC()-handling
registration sets mandatory program type/expected attach type for
a given prefix and can provide three callbacks called at different
points of BPF program lifetime:
- init callback for right after bpf_program is initialized and
prog_type/expected_attach_type is set. This happens during
bpf_object__open() step, close to the very end of constructing
bpf_object, so all the libbpf APIs for querying and updating
bpf_program properties should be available;
- pre-load callback is called right before BPF_PROG_LOAD command is
called in the kernel. This callbacks has ability to set both
bpf_program properties, as well as program load attributes, overriding
and augmenting the standard libbpf handling of them;
- optional auto-attach callback, which makes a given SEC() handler
support auto-attachment of a BPF program through bpf_program__attach()
API and/or BPF skeletons <skel>__attach() method.
Each callbacks gets a `long cookie` parameter passed in, which is
specified during SEC() handling. This can be used by callbacks to lookup
whatever additional information is necessary.
This is not yet completely ready to be exposed to the outside world,
mainly due to non-public nature of struct bpf_prog_load_params. Instead
of making it part of public API, we'll wait until the planned low-level
libbpf API improvements for BPF_PROG_LOAD and other typical bpf()
syscall APIs, at which point we'll have a public, probably OPTS-based,
way to fully specify BPF program load parameters, which will be used as
an interface for custom pre-load callbacks.
But this change itself is already a good first step to unify the BPF
program hanling logic even within the libbpf itself. As one example, all
the extra per-program type handling (sleepable bit, attach_btf_id
resolution, unsetting optional expected attach type) is now more obvious
and is gathered in one place.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-6-andrii@kernel.org
Normalize all the other non-conforming SEC() usages across all
selftests. This is in preparation for libbpf to start to enforce
stricter SEC() rules in libbpf 1.0 mode.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-5-andrii@kernel.org
Convert all SEC("classifier*") uses to a new and strict SEC("tc")
section name. In reference_tracking selftests switch from ambiguous
searching by program title (section name) to non-ambiguous searching by
name in some selftests, getting closer to completely removing
bpf_object__find_program_by_title().
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-4-andrii@kernel.org
Convert almost all SEC("xdp_blah") uses to strict SEC("xdp") to comply
with strict libbpf 1.0 logic of exact section name match for XDP program
types. There is only one exception, which is only tested through
iproute2 and defines multiple XDP programs within the same BPF object.
Given iproute2 still works in non-strict libbpf mode and it doesn't have
means to specify XDP programs by its name (not section name/title),
leave that single file alone for now until iproute2 gains lookup by
function/program name.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-3-andrii@kernel.org
This patch adds a tail call limit test where the program also emits
a BPF_CALL to an external function prior to the tail call. Mainly
testing that JITed programs preserve its internal register state, for
example tail call count, across such external calls.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-15-johan.almbladh@anyfinetworks.com
This patch fixes an error in the tail call limit test that caused the
test to fail on for x86-64 JIT. Previously, the register R0 was used to
report the total number of tail calls made. However, after a tail call
fall-through, the value of the R0 register is undefined. Now, all tail
call error path tests instead use context state to store the count.
Fixes: 874be05f52 ("bpf, tests: Add tail call test suite")
Reported-by: Paul Chaignon <paul@cilium.io>
Reported-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-14-johan.almbladh@anyfinetworks.com
This patch adds tests of the high 32 bits of 64-bit BPF_END conversions.
It also adds a mirrored set of tests where the source bytes are reversed.
The MSB of each byte is now set on the high word instead, possibly
affecting sign-extension during conversion in a different way. Mainly
for JIT testing.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-13-johan.almbladh@anyfinetworks.com
This patch expands the branch conversion test introduced by 66e5eb84
("bpf, tests: Add branch conversion JIT test"). The test now includes
a JMP with maximum eBPF offset. This triggers branch conversion for the
64-bit MIPS JIT. Additional variants are also added for cases when the
branch is taken or not taken.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-12-johan.almbladh@anyfinetworks.com
This patch adds a set of tests for JMP and JMP32 operations where the
branch decision is know at JIT time. Mainly testing JIT behaviour.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-11-johan.almbladh@anyfinetworks.com
This patch adds a set of tests for JMP to verify that the JITed jump
offset is calculated correctly. We pretend that the verifier has inserted
any zero extensions to make the jump-over operations JIT to one
instruction each, in order to control the exact JITed jump offset.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-10-johan.almbladh@anyfinetworks.com
This patch adds a new flag to indicate that the verified did insert
zero-extensions, even though the verifier is not being run for any
of the tests.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-9-johan.almbladh@anyfinetworks.com
This patch adds a test for the 64-bit immediate load, a two-instruction
operation, to verify correctness for all possible magnitudes of the
immediate operand. Mainly intended for JIT testing.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-8-johan.almbladh@anyfinetworks.com
This patch adds a new type of jump test where the program jumps forwards
and backwards with increasing offset. It mainly tests JITs where a
relative jump may generate different JITed code depending on the offset
size, read MIPS.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-7-johan.almbladh@anyfinetworks.com
This patch adds a set of tests for conditional JMP and JMP32 operations to
verify correctness for all possible magnitudes of the immediate and
register operands. Mainly intended for JIT testing.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-6-johan.almbladh@anyfinetworks.com
This patch adds a set of tests for ALU64 and ALU32 arithmetic and bitwise
logical operations to verify correctness for all possible magnitudes of
the register and immediate operands. Mainly intended for JIT testing.
The patch introduces a pattern generator that can be used to drive
extensive tests of different kinds of operations. It is parameterized
to allow tuning of the operand combinations to test.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-5-johan.almbladh@anyfinetworks.com
This patch adds a set of tests for ALU64 and ALU32 shift operations to
verify correctness for all possible values of the shift value. Mainly
intended for JIT testing.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-4-johan.almbladh@anyfinetworks.com
The test suite used to call any fill_helper callbacks to generate eBPF
program data for all test cases at once. This caused ballooning memory
requirements as more extensive test cases were added. Now the each
fill_helper is called before the test is run and the allocated memory
released afterwards, before the next test case is processed.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-3-johan.almbladh@anyfinetworks.com
This patch allows a test cast to specify the number of runs to use. For
compatibility with existing test case definitions, the default value 0
is interpreted as MAX_TESTRUNS.
A reduced number of runs is useful for complex test programs where 1000
runs may take a very long time. Instead of reducing what is tested, one
can instead reduce the number of times the test is run.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-2-johan.almbladh@anyfinetworks.com
When parsing legacy map definitions, libbpf would error out when
encountering an STT_SECTION symbol. This becomes a problem because some
versions of binutils will produce SECTION symbols for every section when
processing an ELF file, so BPF files run through 'strip' will end up with
such symbols, making libbpf refuse to load them.
There's not really any reason why erroring out is strictly necessary, so
change libbpf to just ignore SECTION symbols when parsing the ELF.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210927205810.715656-1-toke@redhat.com
Magnus Karlsson says:
====================
This patch set introduces a batched interface for Rx buffer allocation
in AF_XDP buffer pool. Instead of using xsk_buff_alloc(*pool), drivers
can now use xsk_buff_alloc_batch(*pool, **xdp_buff_array,
max). Instead of returning a pointer to an xdp_buff, it returns the
number of xdp_buffs it managed to allocate up to the maximum value of
the max parameter in the function call. Pointers to the allocated
xdp_buff:s are put in the xdp_buff_array supplied in the call. This
could be a SW ring that already exists in the driver or a new
structure that the driver has allocated.
u32 xsk_buff_alloc_batch(struct xsk_buff_pool *pool,
struct xdp_buff **xdp,
u32 max);
When using this interface, the driver should also use the new
interface below to set the relevant fields in the struct xdp_buff. The
reason for this is that xsk_buff_alloc_batch() does not fill in the
data and data_meta fields for you as is the case with
xsk_buff_alloc(). So it is not sufficient to just set data_end
(effectively the size) anymore in the driver. The reason for this is
performance as explained in detail in the commit message.
void xsk_buff_set_size(struct xdp_buff *xdp, u32 size);
Patch 6 also optimizes the buffer allocation in the aligned case. In
this case, we can skip the reinitialization of most fields in the
xdp_buff_xsk struct at allocation time. As the number of elements in
the heads array is equal to the number of possible buffers in the
umem, we can initialize them once and for all at bind time and then
just point to the correct one in the xdp_buff_array that is returned
to the driver. No reason to have a stack of free head entries. In the
unaligned case, the buffers can reside anywhere in the umem, so this
optimization is not possible as we still have to fill in the right
information in the xdp_buff every single time one is allocated.
I have updated i40e and ice to use this new batched interface.
These are the throughput results on my 2.1 GHz Cascade Lake system:
Aligned mode:
ice: +11% / -9 cycles/pkt
i40e: +12% / -9 cycles/pkt
Unaligned mode:
ice: +1.5% / -1 cycle/pkt
i40e: +1% / -1 cycle/pkt
For the aligned case, batching provides around 40% of the performance
improvement and the aligned optimization the rest, around 60%. Would
have expected a ~4% boost for unaligned with this data, but I only get
around 1%. Do not know why. Note that memory consumption in aligned
mode is also reduced by this patch set.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add a test for the frame_headroom feature that can be set on the
umem. The logic added validates that all offsets in all tests and
packets are valid, not just the ones that have a specifically
configured frame_headroom.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-14-magnus.karlsson@gmail.com
Change the interleaving of packets in unaligned mode. With the current
buffer addresses in the packet stream, the last buffer in the umem
could not be used as a large packet could potentially write over the
end of the umem. The kernel correctly threw this buffer address away
and refused to use it. This is perfectly fine for all regular packet
streams, but the ones used for unaligned mode have every other packet
being at some different offset. As we will add checks for correct
offsets in the next patch, this needs to be fixed. Just start these
page-boundary straddling buffers one page earlier so that the last
one is not on the last page of the umem, making all buffers valid.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-13-magnus.karlsson@gmail.com
Add a test where a single packet is sent and received. This might
sound like a silly test, but since many of the interfaces in xsk are
batched, it is important to be able to validate that we did not break
something as fundamental as just receiving single packets, instead of
batches of packets at high speed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-12-magnus.karlsson@gmail.com
Introduce pacing of traffic so that the Tx thread can never send more
packets than the receiver has processed plus the number of packets it
can have in its umem. So at any point in time, the number of in flight
packets (not processed by the Rx thread) are less than or equal to the
number of packets that can be held in the Rx thread's umem.
The batch size is also increased to improve running time.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-11-magnus.karlsson@gmail.com
The socket creation retry unnecessarily registered the umem once for
every retry. No reason to do this. It wastes memory and it might lead
to too many pages being locked at some point and the failure of a
test.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-10-magnus.karlsson@gmail.com
Fix a problem where the fill ring was populated with too many
entries. If number of buffers in the umem was smaller than the fill
ring size, the code used to loop over from the beginning of the umem
and start putting the same buffers in again. This is racy indeed as a
later packet can be received overwriting an earlier one before the Rx
thread manages to validate it.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-9-magnus.karlsson@gmail.com
Fix missing initialization of the member rx_pkt_nb in the packet
stream. This leads to some tests declaring success too early as the
test thought all packets had already been received.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-8-magnus.karlsson@gmail.com
Optimize for the aligned case by precomputing the parameter values of
the xdp_buff_xsk and xdp_buff structures in the heads array. We can do
this as the heads array size is equal to the number of chunks in the
umem for the aligned case. Then every entry in this array will reflect
a certain chunk/frame and can therefore be prepopulated with the
correct values and we can drop the use of the free_heads stack. Note
that it is not possible to allocate more buffers than what has been
allocated in the aligned case since each chunk can only contain a
single buffer.
We can unfortunately not do this in the unaligned case as one chunk
might contain multiple buffers. In this case, we keep the old scheme
of populating a heads entry every time it is used and using
the free_heads stack.
Also move xp_release() and xp_get_handle() to xsk_buff_pool.h. They
were for some reason in xsk.c even though they are buffer pool
operations.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-7-magnus.karlsson@gmail.com
Use the new xsk batched rx allocation interface for the zero-copy data
path. As the array of struct xdp_buff pointers kept by the driver is
really a ring that wraps, the allocation routine is modified to detect
a wrap and in that case call the allocation function twice. The
allocation function cannot deal with wrapped rings, only arrays. As we
now know exactly how many buffers we get and that there is no
wrapping, the allocation function can be simplified even more as all
if-statements in the allocation loop can be removed, improving
performance.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-6-magnus.karlsson@gmail.com
Use the new xsk batched rx allocation interface for the zero-copy data
path. As the array of struct xdp_buff pointers kept by the driver is
really a ring that wraps, the allocation routine is modified to detect
a wrap and in that case call the allocation function twice. The
allocation function cannot deal with wrapped rings, only arrays. As we
now know exactly how many buffers we get and that there is no
wrapping, the allocation function can be simplified even more as all
if-statements in the allocation loop can be removed, improving
performance.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-5-magnus.karlsson@gmail.com
In order to use the new xsk batched buffer allocation interface, a
pointer to an array of struct xsk_buff pointers need to be provided so
that the function can put the result of the allocation there. In the
ice driver, we already have a ring that stores pointers to
xdp_buffs. This is only used for the xsk zero-copy driver and is a
union with the structure that is used for the regular non zero-copy
path. Unfortunately, that structure is larger than the xdp_buffs
pointers which mean that there will be a stride (of 20 bytes) between
each xdp_buff pointer. And feeding this into the xsk_buff_alloc_batch
interface will not work since it assumes a regular array of xdp_buff
pointers (each 8 bytes with 0 bytes in-between them on a 64-bit
system).
To fix this, remove the xdp_buff pointer from the rx_buf union and
move it one step higher to the union above which only has pointers to
arrays in it. This solves the problem and we can directly feed the SW
ring of xdp_buff pointers straight into the allocation function in the
next patch when that interface is used. This will improve performance.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-4-magnus.karlsson@gmail.com
Add a new driver interface xsk_buff_alloc_batch() offering batched
buffer allocations to improve performance. The new interface takes
three arguments: the buffer pool to allocated from, a pointer to an
array of struct xdp_buff pointers which will contain pointers to the
allocated xdp_buffs, and an unsigned integer specifying the max number
of buffers to allocate. The return value is the actual number of
buffers that the allocator managed to allocate and it will be in the
range 0 <= N <= max, where max is the third parameter to the function.
u32 xsk_buff_alloc_batch(struct xsk_buff_pool *pool, struct xdp_buff **xdp,
u32 max);
A second driver interface is also introduced that need to be used in
conjunction with xsk_buff_alloc_batch(). It is a helper that sets the
size of struct xdp_buff and is used by the NIC Rx irq routine when
receiving a packet. This helper sets the three struct members data,
data_meta, and data_end. The two first ones is in the xsk_buff_alloc()
case set in the allocation routine and data_end is set when a packet
is received in the receive irq function. This unfortunately leads to
worse performance since the xdp_buff is touched twice with a long time
period in between leading to an extra cache miss. Instead, we fill out
the xdp_buff with all 3 fields at one single point in time in the
driver, when the size of the packet is known. Hence this helper. Note
that the driver has to use this helper (or set all three fields
itself) when using xsk_buff_alloc_batch(). xsk_buff_alloc() works as
before and does not require this.
void xsk_buff_set_size(struct xdp_buff *xdp, u32 size);
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-3-magnus.karlsson@gmail.com
