commit 2de9ee9405 upstream.
All architectures should use a long aligned address passed to set_bit().
User processes can pass either a 32-bit or 64-bit sized value to be
updated when tracing is enabled when on a 64-bit kernel. Both cases are
ensured to be naturally aligned, however, that is not enough. The
address must be long aligned without affecting checks on the value
within the user process which require different adjustments for the bit
for little and big endian CPUs.
Add a compat flag to user_event_enabler that indicates when a 32-bit
value is being used on a 64-bit kernel. Long align addresses and correct
the bit to be used by set_bit() to account for this alignment. Ensure
compat flags are copied during forks and used during deletion clears.
Link: https://lore.kernel.org/linux-trace-kernel/20230925230829.341-2-beaub@linux.microsoft.com
Link: https://lore.kernel.org/linux-trace-kernel/20230914131102.179100-1-cleger@rivosinc.com/
Cc: stable@vger.kernel.org
Fixes: 7235759084 ("tracing/user_events: Use remote writes for event enablement")
Reported-by: Clément Léger <cleger@rivosinc.com>
Suggested-by: Clément Léger <cleger@rivosinc.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 41bc46c12a upstream.
Currently the multi_kprobe link attach does not check error
injection list for programs with bpf_override_return helper
and allows them to attach anywhere. Adding the missing check.
Fixes: 0dcac27254 ("bpf: Add multi kprobe link")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20230907200652.926951-1-jolsa@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e0cb399c7 upstream.
It was discovered that the ring buffer polling was incorrectly stating
that read would not block, but that's because polling did not take into
account that reads will block if the "buffer-percent" was set. Instead,
the ring buffer polling would say reads would not block if there was any
data in the ring buffer. This was incorrect behavior from a user space
point of view. This was fixed by commit 42fb0a1e84 by having the polling
code check if the ring buffer had more data than what the user specified
"buffer percent" had.
The problem now is that the polling code did not register itself to the
writer that it wanted to wait for a specific "full" value of the ring
buffer. The result was that the writer would wake the polling waiter
whenever there was a new event. The polling waiter would then wake up, see
that there's not enough data in the ring buffer to notify user space and
then go back to sleep. The next event would wake it up again.
Before the polling fix was added, the code would wake up around 100 times
for a hackbench 30 benchmark. After the "fix", due to the constant waking
of the writer, it would wake up over 11,0000 times! It would never leave
the kernel, so the user space behavior was still "correct", but this
definitely is not the desired effect.
To fix this, have the polling code add what it's waiting for to the
"shortest_full" variable, to tell the writer not to wake it up if the
buffer is not as full as it expects to be.
Note, after this fix, it appears that the waiter is now woken up around 2x
the times it was before (~200). This is a tremendous improvement from the
11,000 times, but I will need to spend some time to see why polling is
more aggressive in its wakeups than the read blocking code.
Link: https://lore.kernel.org/linux-trace-kernel/20230929180113.01c2cae3@rorschach.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: 42fb0a1e84 ("tracing/ring-buffer: Have polling block on watermark")
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Tested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45d99ea451 upstream.
The 'bytes' info in file 'per_cpu/cpu<X>/stats' means the number of
bytes in cpu buffer that have not been consumed. However, currently
after consuming data by reading file 'trace_pipe', the 'bytes' info
was not changed as expected.
# cat per_cpu/cpu0/stats
entries: 0
overrun: 0
commit overrun: 0
bytes: 568 <--- 'bytes' is problematical !!!
oldest event ts: 8651.371479
now ts: 8653.912224
dropped events: 0
read events: 8
The root cause is incorrect stat on cpu_buffer->read_bytes. To fix it:
1. When stat 'read_bytes', account consumed event in rb_advance_reader();
2. When stat 'entries_bytes', exclude the discarded padding event which
is smaller than minimum size because it is invisible to reader. Then
use rb_page_commit() instead of BUF_PAGE_SIZE at where accounting for
page-based read/remove/overrun.
Also correct the comments of ring_buffer_bytes_cpu() in this patch.
Link: https://lore.kernel.org/linux-trace-kernel/20230921125425.1708423-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: c64e148a3b ("trace: Add ring buffer stats to measure rate of events")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc09027786 upstream.
During RCU-boost testing with the TREE03 rcutorture config, I found that
after a few hours, the machine locks up.
On tracing, I found that there is a live lock happening between 2 CPUs.
One CPU has an RT task running, while another CPU is being offlined
which also has an RT task running. During this offlining, all threads
are migrated. The migration thread is repeatedly scheduled to migrate
actively running tasks on the CPU being offlined. This results in a live
lock because select_fallback_rq() keeps picking the CPU that an RT task
is already running on only to get pushed back to the CPU being offlined.
It is anyway pointless to pick CPUs for pushing tasks to if they are
being offlined only to get migrated away to somewhere else. This could
also add unwanted latency to this task.
Fix these issues by not selecting CPUs in RT if they are not 'active'
for scheduling, using the cpu_active_mask. Other parts in core.c already
use cpu_active_mask to prevent tasks from being put on CPUs going
offline.
With this fix I ran the tests for days and could not reproduce the
hang. Without the patch, I hit it in a few hours.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230923011409.3522762-1-joel@joelfernandes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cff9b2332a upstream.
Initial booting is setting the task flag to idle (PF_IDLE) by the call
path sched_init() -> init_idle(). Having the task idle and calling
call_rcu() in kernel/rcu/tiny.c means that TIF_NEED_RESCHED will be
set. Subsequent calls to any cond_resched() will enable IRQs,
potentially earlier than the IRQ setup has completed. Recent changes
have caused just this scenario and IRQs have been enabled early.
This causes a warning later in start_kernel() as interrupts are enabled
before they are fully set up.
Fix this issue by setting the PF_IDLE flag later in the boot sequence.
Although the boot task was marked as idle since (at least) d80e4fda576d,
I am not sure that it is wrong to do so. The forced context-switch on
idle task was introduced in the tiny_rcu update, so I'm going to claim
this fixes 5f6130fa52.
Fixes: 5f6130fa52 ("tiny_rcu: Directly force QS when call_rcu_[bh|sched]() on idle_task")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mm/CAMuHMdWpvpWoDa=Ox-do92czYRvkok6_x6pYUH+ZouMcJbXy+Q@mail.gmail.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 95a404bd60 ]
When iterating over the ring buffer while the ring buffer is active, the
writer can corrupt the reader. There's barriers to help detect this and
handle it, but that code missed the case where the last event was at the
very end of the page and has only 4 bytes left.
The checks to detect the corruption by the writer to reads needs to see the
length of the event. If the length in the first 4 bytes is zero then the
length is stored in the second 4 bytes. But if the writer is in the process
of updating that code, there's a small window where the length in the first
4 bytes could be zero even though the length is only 4 bytes. That will
cause rb_event_length() to read the next 4 bytes which could happen to be off the
allocated page.
To protect against this, fail immediately if the next event pointer is
less than 8 bytes from the end of the commit (last byte of data), as all
events must be a minimum of 8 bytes anyway.
Link: https://lore.kernel.org/all/20230905141245.26470-1-Tze-nan.Wu@mediatek.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230907122820.0899019c@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Reported-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6bd2c9248 ]
When user resize all trace ring buffer through file 'buffer_size_kb',
then in ring_buffer_resize(), kernel allocates buffer pages for each
cpu in a loop.
If the kernel preemption model is PREEMPT_NONE and there are many cpus
and there are many buffer pages to be allocated, it may not give up cpu
for a long time and finally cause a softlockup.
To avoid it, call cond_resched() after each cpu buffer allocation.
Link: https://lore.kernel.org/linux-trace-kernel/20230906081930.3939106-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6a241764f ]
Commit 8ac0406335 ("swiotlb: reduce the number of areas to match
actual memory pool size") calculated the reduced number of areas in
swiotlb_init_remap() but didn't actually use the value. Replace usage of
default_nareas accordingly.
Fixes: 8ac0406335 ("swiotlb: reduce the number of areas to match actual memory pool size")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8f1257286 ]
snprintf() does not return negative error code on error, it returns the
number of characters which *would* be generated for the given input.
Fix the error handling check.
Fixes: 57539b1c0a ("bpf: Enable annotating trusted nested pointers")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/393bdebc87b22563c08ace094defa7160eb7a6c0.1694190795.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a49f4195d ]
Fix for a bug observable under the following sequence of events:
1. Create a network device that does not support XDP offload.
2. Load a device bound XDP program with BPF_F_XDP_DEV_BOUND_ONLY flag
(such programs are not offloaded).
3. Load a device bound XDP program with zero flags
(such programs are offloaded).
At step (2) __bpf_prog_dev_bound_init() associates with device (1)
a dummy bpf_offload_netdev struct with .offdev field set to NULL.
At step (3) __bpf_prog_dev_bound_init() would reuse dummy struct
allocated at step (2).
However, downstream usage of the bpf_offload_netdev assumes that
.offdev field can't be NULL, e.g. in bpf_prog_offload_verifier_prep().
Adjust __bpf_prog_dev_bound_init() to require bpf_offload_netdev
with non-NULL .offdev for offloaded BPF programs.
Fixes: 2b3486bc2d ("bpf: Introduce device-bound XDP programs")
Reported-by: syzbot+291100dcb32190ec02a8@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/000000000000d97f3c060479c4f8@google.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230912005539.2248244-2-eddyz87@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a34a9f1a19 ]
Sysbot discovered that the queue and stack maps can deadlock if they are
being used from a BPF program that can be called from NMI context (such as
one that is attached to a perf HW counter event). To fix this, add an
in_nmi() check and use raw_spin_trylock() in NMI context, erroring out if
grabbing the lock fails.
Fixes: f1a2e44a3a ("bpf: add queue and stack maps")
Reported-by: Hsin-Wei Hung <hsinweih@uci.edu>
Tested-by: Hsin-Wei Hung <hsinweih@uci.edu>
Co-developed-by: Hsin-Wei Hung <hsinweih@uci.edu>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230911132815.717240-1-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7e2cfbd2d3 upstream.
The option files update the options for a given trace array. For an
instance, if the file is opened and the instance is deleted, reading or
writing to the file will cause a use after free.
Up the ref count of the trace_array when an option file is opened.
Link: https://lkml.kernel.org/r/20230907024804.086679464@goodmis.org
Link: https://lore.kernel.org/all/1cb3aee2-19af-c472-e265-05176fe9bd84@huawei.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Fixes: 8530dec63e ("tracing: Add tracing_check_open_get_tr()")
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b37febc57 upstream.
The current_trace updates the trace array tracer. For an instance, if the
file is opened and the instance is deleted, reading or writing to the file
will cause a use after free.
Up the ref count of the trace array when current_trace is opened.
Link: https://lkml.kernel.org/r/20230907024803.877687227@goodmis.org
Link: https://lore.kernel.org/all/1cb3aee2-19af-c472-e265-05176fe9bd84@huawei.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Fixes: 8530dec63e ("tracing: Add tracing_check_open_get_tr()")
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5ca233e2e upstream.
When the trace event enable and filter files are opened, increment the
trace array ref counter, otherwise they can be accessed when the trace
array is being deleted. The ref counter keeps the trace array from being
deleted while those files are opened.
Link: https://lkml.kernel.org/r/20230907024803.456187066@goodmis.org
Link: https://lore.kernel.org/all/1cb3aee2-19af-c472-e265-05176fe9bd84@huawei.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8530dec63e ("tracing: Add tracing_check_open_get_tr()")
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 62663b8496 upstream.
The synth traces incorrectly print pointer to the synthetic event values
instead of the actual value when using u64 type. Fix by addressing the
contents of the union properly.
Link: https://lore.kernel.org/linux-trace-kernel/20230911141704.3585965-1-tero.kristo@linux.intel.com
Fixes: ddeea494a1 ("tracing/synthetic: Use union instead of casts")
Cc: stable@vger.kernel.org
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e5c624f027 upstream.
The event inject files add events for a specific trace array. For an
instance, if the file is opened and the instance is deleted, reading or
writing to the file will cause a use after free.
Up the ref count of the trace_array when a event inject file is opened.
Link: https://lkml.kernel.org/r/20230907024804.292337868@goodmis.org
Link: https://lore.kernel.org/all/1cb3aee2-19af-c472-e265-05176fe9bd84@huawei.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Fixes: 6c3edaf9fd ("tracing: Introduce trace event injection")
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d660c9b2b upstream.
The tracing_max_latency file points to the trace_array max_latency field.
For an instance, if the file is opened and the instance is deleted,
reading or writing to the file will cause a use after free.
Up the ref count of the trace_array when tracing_max_latency is opened.
Link: https://lkml.kernel.org/r/20230907024803.666889383@goodmis.org
Link: https://lore.kernel.org/all/1cb3aee2-19af-c472-e265-05176fe9bd84@huawei.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Fixes: 8530dec63e ("tracing: Add tracing_check_open_get_tr()")
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cccd328165 ]
Commit:
5a5d7e9bad ("cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG")
amended warn_slowpath_fmt() to disable preemption until the WARN splat
has been emitted.
However the commit neglected to reenable preemption in the !fmt codepath,
i.e. when a WARN splat is emitted without additional format string.
One consequence is that users may see more splats than intended. E.g. a
WARN splat emitted in a work item results in at least two extra splats:
BUG: workqueue leaked lock or atomic
(emitted by process_one_work())
BUG: scheduling while atomic
(emitted by worker_thread() -> schedule())
Ironically the point of the commit was to *avoid* extra splats. ;)
Fix it.
Fixes: 5a5d7e9bad ("cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/3ec48fde01e4ee6505f77908ba351bad200ae3d1.1694763684.git.lukas@wunner.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 148b6f4cc3 ]
Commit 5904de0d73 ("PM: hibernate: Do not get block device exclusively
in test_resume mode") fixes a hibernation issue under test_resume mode.
That commit is supposed to open the block device in non-exclusive mode
when in test_resume. However the code does the opposite, which is against
its description.
In summary, the swap device is only opened exclusively by swsusp_check()
with its corresponding *close(), and must be in non test_resume mode.
This is to avoid the race condition that different processes scribble the
device at the same time. All the other cases should use non-exclusive mode.
Fix it by really disabling exclusive mode under test_resume.
Fixes: 5904de0d73 ("PM: hibernate: Do not get block device exclusively in test_resume mode")
Closes: https://lore.kernel.org/lkml/000000000000761f5f0603324129@google.com/
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Chenzhou Feng <chenzhoux.feng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 132a90d152 ]
Currently abandon_console_lock_in_panic() is only used to determine if
the current CPU should immediately release the console lock because
another CPU is in panic. However, later this function will be used by
the CPU to immediately release other resources in this situation.
Rename the function to other_cpu_in_panic(), which is a better
description and does not assume it is related to the console lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230717194607.145135-8-john.ogness@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 696ffaf50e ]
Printing to consoles can be deferred for several reasons:
- explicitly with printk_deferred()
- printk() in NMI context
- recursive printk() calls
The current implementation is not consistent. For printk_deferred(),
irq work is scheduled twice. For NMI und recursive, panic CPU
suppression and caller delays are not properly enforced.
Correct these inconsistencies by consolidating the deferred printing
code so that vprintk_deferred() is the top-level function for
deferred printing and vprintk_emit() will perform whichever irq_work
queueing is appropriate.
Also add kerneldoc for wake_up_klogd() and defer_console_output() to
clarify their differences and appropriate usage.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230717194607.145135-6-john.ogness@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eacb04ff3c ]
Currently console_flush_on_panic() will attempt to acquire the
console lock when flushing the buffer on panic. If it fails to
acquire the lock, it continues anyway because this is the last
chance to get any pending records printed.
The reason why the console lock was attempted at all was to
prevent any other CPUs from acquiring the console lock for
printing while the panic CPU was printing. But as of the
previous commit, non-panic CPUs will no longer attempt to
acquire the console lock in a panic situation. Therefore it is
no longer strictly necessary for a panic CPU to acquire the
console lock.
Avoiding taking the console lock when flushing in panic has
the additional benefit of avoiding possible deadlocks due to
semaphore usage in NMI context (semaphores are not NMI-safe)
and avoiding possible deadlocks if another CPU accesses the
semaphore and is stopped while holding one of the semaphore's
internal spinlocks.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230717194607.145135-5-john.ogness@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51a1d258e5 ]
When in a panic situation, non-panic CPUs should avoid holding the
console lock so as not to contend with the panic CPU. This is already
implemented with abandon_console_lock_in_panic(), which is checked
after each printed line. However, non-panic CPUs should also avoid
trying to acquire the console lock during a panic.
Modify console_trylock() to fail and console_lock() to block() when
called from a non-panic CPU during a panic.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230717194607.145135-4-john.ogness@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b23a66db5 ]
A semaphore is not NMI-safe, even when using down_trylock(). Both
down_trylock() and up() are using internal spinlocks and up()
might even call wake_up_process().
In the panic() code path it gets even worse because the internal
spinlocks of the semaphore may have been taken by a CPU that has
been stopped.
To reduce the risk of deadlocks caused by the console semaphore in
the panic path, make the following changes:
- First check if any consoles have implemented the unblank()
callback. If not, then there is no reason to take the console
semaphore anyway. (This check is also useful for the non-panic
path since the locking/unlocking of the console lock can be
quite expensive due to console printing.)
- If the panic path is in NMI context, bail out without attempting
to take the console semaphore or calling any unblank() callbacks.
Bailing out is acceptable because console_unblank() would already
bail out if the console semaphore is contended. The alternative of
ignoring the console semaphore and calling the unblank() callbacks
anyway is a bad idea because these callbacks are also not NMI-safe.
If consoles with unblank() callbacks exist and console_unblank() is
called from a non-NMI panic context, it will still attempt a
down_trylock(). This could still result in a deadlock if one of the
stopped CPUs is holding the semaphore internal spinlock. But this
is a risk that the kernel has been (and continues to be) willing
to take.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230717194607.145135-3-john.ogness@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0816b8c6bf ]
An earlier patch in the series ensures that the underlying memory of
nodes with bpf_refcount - which can have multiple owners - is not reused
until RCU grace period has elapsed. This prevents
use-after-free with non-owning references that may point to
recently-freed memory. While RCU read lock is held, it's safe to
dereference such a non-owning ref, as by definition RCU GP couldn't have
elapsed and therefore underlying memory couldn't have been reused.
From the perspective of verifier "trustedness" non-owning refs to
refcounted nodes are now trusted only in RCU CS and therefore should no
longer pass is_trusted_reg, but rather is_rcu_reg. Let's mark them
MEM_RCU in order to reflect this new state.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230821193311.3290257-6-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 013608cd08 ]
Kernels built with CONFIG_KASAN=y quarantine newly freed memory in order
to better detect use-after-free errors. However, this can exhaust memory
more quickly in allocator-heavy tests, which can result in spurious
scftorture failure. This commit therefore forgives memory-allocation
failure in kernels built with CONFIG_KASAN=y, but continues counting
the errors for use in detailed test-result analyses.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d243b34459 ]
Under PREEMPT_RT, __put_task_struct() indirectly acquires sleeping
locks. Therefore, it can't be called from an non-preemptible context.
One practical example is splat inside inactive_task_timer(), which is
called in a interrupt context:
CPU: 1 PID: 2848 Comm: life Kdump: loaded Tainted: G W ---------
Hardware name: HP ProLiant DL388p Gen8, BIOS P70 07/15/2012
Call Trace:
dump_stack_lvl+0x57/0x7d
mark_lock_irq.cold+0x33/0xba
mark_lock+0x1e7/0x400
mark_usage+0x11d/0x140
__lock_acquire+0x30d/0x930
lock_acquire.part.0+0x9c/0x210
rt_spin_lock+0x27/0xe0
refill_obj_stock+0x3d/0x3a0
kmem_cache_free+0x357/0x560
inactive_task_timer+0x1ad/0x340
__run_hrtimer+0x8a/0x1a0
__hrtimer_run_queues+0x91/0x130
hrtimer_interrupt+0x10f/0x220
__sysvec_apic_timer_interrupt+0x7b/0xd0
sysvec_apic_timer_interrupt+0x4f/0xd0
asm_sysvec_apic_timer_interrupt+0x12/0x20
RIP: 0033:0x7fff196bf6f5
Instead of calling __put_task_struct() directly, we defer it using
call_rcu(). A more natural approach would use a workqueue, but since
in PREEMPT_RT, we can't allocate dynamic memory from atomic context,
the code would become more complex because we would need to put the
work_struct instance in the task_struct and initialize it when we
allocate a new task_struct.
The issue is reproducible with stress-ng:
while true; do
stress-ng --sched deadline --sched-period 1000000000 \
--sched-runtime 800000000 --sched-deadline \
1000000000 --mmapfork 23 -t 20
done
Reported-by: Hu Chunyu <chuhu@redhat.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Valentin Schneider <vschneid@redhat.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230614122323.37957-2-wander@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a5a148aaf ]
bpf_probe_read_kernel() has a __weak definition in core.c and another
definition with an incompatible prototype in kernel/trace/bpf_trace.c,
when CONFIG_BPF_EVENTS is enabled.
Since the two are incompatible, there cannot be a shared declaration in
a header file, but the lack of a prototype causes a W=1 warning:
kernel/bpf/core.c:1638:12: error: no previous prototype for 'bpf_probe_read_kernel' [-Werror=missing-prototypes]
On 32-bit architectures, the local prototype
u64 __weak bpf_probe_read_kernel(void *dst, u32 size, const void *unsafe_ptr)
passes arguments in other registers as the one in bpf_trace.c
BPF_CALL_3(bpf_probe_read_kernel, void *, dst, u32, size,
const void *, unsafe_ptr)
which uses 64-bit arguments in pairs of registers.
As both versions of the function are fairly simple and only really
differ in one line, just move them into a header file as an inline
function that does not add any overhead for the bpf_trace.c callers
and actually avoids a function call for the other one.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/ac25cb0f-b804-1649-3afb-1dc6138c2716@iogearbox.net/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230801111449.185301-1-arnd@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55d49f750b ]
The commit c83597fa5d ("bpf: Refactor some inode/task/sk storage functions
for reuse"), refactored the bpf_{sk,task,inode}_storage_free() into
bpf_local_storage_unlink_nolock() which then later renamed to
bpf_local_storage_destroy(). The commit accidentally passed the
"bool uncharge_mem = false" argument to bpf_selem_unlink_storage_nolock()
which then stopped the uncharge from happening to the sk->sk_omem_alloc.
This missing uncharge only happens when the sk is going away (during
__sk_destruct).
This patch fixes it by always passing "uncharge_mem = true". It is a
noop to the task/inode/cgroup storage because they do not have the
map_local_storage_(un)charge enabled in the map_ops. A followup patch
will be done in bpf-next to remove the uncharge_mem argument.
A selftest is added in the next patch.
Fixes: c83597fa5d ("bpf: Refactor some inode/task/sk storage functions for reuse")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901231129.578493-3-martin.lau@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a96a44aba5 ]
'./test_progs -t test_local_storage' reported a splat:
[ 27.137569] =============================
[ 27.138122] [ BUG: Invalid wait context ]
[ 27.138650] 6.5.0-03980-gd11ae1b16b0a #247 Tainted: G O
[ 27.139542] -----------------------------
[ 27.140106] test_progs/1729 is trying to lock:
[ 27.140713] ffff8883ef047b88 (stock_lock){-.-.}-{3:3}, at: local_lock_acquire+0x9/0x130
[ 27.141834] other info that might help us debug this:
[ 27.142437] context-{5:5}
[ 27.142856] 2 locks held by test_progs/1729:
[ 27.143352] #0: ffffffff84bcd9c0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x4/0x40
[ 27.144492] #1: ffff888107deb2c0 (&storage->lock){..-.}-{2:2}, at: bpf_local_storage_update+0x39e/0x8e0
[ 27.145855] stack backtrace:
[ 27.146274] CPU: 0 PID: 1729 Comm: test_progs Tainted: G O 6.5.0-03980-gd11ae1b16b0a #247
[ 27.147550] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 27.149127] Call Trace:
[ 27.149490] <TASK>
[ 27.149867] dump_stack_lvl+0x130/0x1d0
[ 27.152609] dump_stack+0x14/0x20
[ 27.153131] __lock_acquire+0x1657/0x2220
[ 27.153677] lock_acquire+0x1b8/0x510
[ 27.157908] local_lock_acquire+0x29/0x130
[ 27.159048] obj_cgroup_charge+0xf4/0x3c0
[ 27.160794] slab_pre_alloc_hook+0x28e/0x2b0
[ 27.161931] __kmem_cache_alloc_node+0x51/0x210
[ 27.163557] __kmalloc+0xaa/0x210
[ 27.164593] bpf_map_kzalloc+0xbc/0x170
[ 27.165147] bpf_selem_alloc+0x130/0x510
[ 27.166295] bpf_local_storage_update+0x5aa/0x8e0
[ 27.167042] bpf_fd_sk_storage_update_elem+0xdb/0x1a0
[ 27.169199] bpf_map_update_value+0x415/0x4f0
[ 27.169871] map_update_elem+0x413/0x550
[ 27.170330] __sys_bpf+0x5e9/0x640
[ 27.174065] __x64_sys_bpf+0x80/0x90
[ 27.174568] do_syscall_64+0x48/0xa0
[ 27.175201] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 27.175932] RIP: 0033:0x7effb40e41ad
[ 27.176357] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d8
[ 27.179028] RSP: 002b:00007ffe64c21fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141
[ 27.180088] RAX: ffffffffffffffda RBX: 00007ffe64c22768 RCX: 00007effb40e41ad
[ 27.181082] RDX: 0000000000000020 RSI: 00007ffe64c22008 RDI: 0000000000000002
[ 27.182030] RBP: 00007ffe64c21ff0 R08: 0000000000000000 R09: 00007ffe64c22788
[ 27.183038] R10: 0000000000000064 R11: 0000000000000202 R12: 0000000000000000
[ 27.184006] R13: 00007ffe64c22788 R14: 00007effb42a1000 R15: 0000000000000000
[ 27.184958] </TASK>
It complains about acquiring a local_lock while holding a raw_spin_lock.
It means it should not allocate memory while holding a raw_spin_lock
since it is not safe for RT.
raw_spin_lock is needed because bpf_local_storage supports tracing
context. In particular for task local storage, it is easy to
get a "current" task PTR_TO_BTF_ID in tracing bpf prog.
However, task (and cgroup) local storage has already been moved to
bpf mem allocator which can be used after raw_spin_lock.
The splat is for the sk storage. For sk (and inode) storage,
it has not been moved to bpf mem allocator. Using raw_spin_lock or not,
kzalloc(GFP_ATOMIC) could theoretically be unsafe in tracing context.
However, the local storage helper requires a verifier accepted
sk pointer (PTR_TO_BTF_ID), it is hypothetical if that (mean running
a bpf prog in a kzalloc unsafe context and also able to hold a verifier
accepted sk pointer) could happen.
This patch avoids kzalloc after raw_spin_lock to silent the splat.
There is an existing kzalloc before the raw_spin_lock. At that point,
a kzalloc is very likely required because a lookup has just been done
before. Thus, this patch always does the kzalloc before acquiring
the raw_spin_lock and remove the later kzalloc usage after the
raw_spin_lock. After this change, it will have a charge and then
uncharge during the syscall bpf_map_update_elem() code path.
This patch opts for simplicity and not continue the old
optimization to save one charge and uncharge.
This issue is dated back to the very first commit of bpf_sk_storage
which had been refactored multiple times to create task, inode, and
cgroup storage. This patch uses a Fixes tag with a more recent
commit that should be easier to do backport.
Fixes: b00fa38a9c ("bpf: Enable non-atomic allocations in local storage")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901231129.578493-2-martin.lau@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6764e767f4 ]
__bpf_prog_enter_recur() assigns bpf_tramp_run_ctx::saved_run_ctx before
performing the recursion check which means in case of a recursion
__bpf_prog_exit_recur() uses the previously set bpf_tramp_run_ctx::saved_run_ctx
value.
__bpf_prog_enter_sleepable_recur() assigns bpf_tramp_run_ctx::saved_run_ctx
after the recursion check which means in case of a recursion
__bpf_prog_exit_sleepable_recur() uses an uninitialized value. This does not
look right. If I read the entry trampoline code right, then bpf_tramp_run_ctx
isn't initialized upfront.
Align __bpf_prog_enter_sleepable_recur() with __bpf_prog_enter_recur() and
set bpf_tramp_run_ctx::saved_run_ctx before the recursion check is made.
Remove the assignment of saved_run_ctx in kern_sys_bpf() since it happens
a few cycles later.
Fixes: e384c7b7b4 ("bpf, x86: Create bpf_tramp_run_ctx on the caller thread's stack")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230830080405.251926-3-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7645629f7d ]
If __bpf_prog_enter_sleepable_recur() detects recursion then it returns
0 without undoing rcu_read_lock_trace(), migrate_disable() or
decrementing the recursion counter. This is fine in the JIT case because
the JIT code will jump in the 0 case to the end and invoke the matching
exit trampoline (__bpf_prog_exit_sleepable_recur()).
This is not the case in kern_sys_bpf() which returns directly to the
caller with an error code.
Add __bpf_prog_exit_sleepable_recur() as clean up in the recursion case.
Fixes: b1d18a7574 ("bpf: Extend sys_bpf commands for bpf_syscall programs.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230830080405.251926-2-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea078ae910 ]
Resetting rules' stateful data happens outside of the transaction logic,
so 'get' and 'dump' handlers have to emit audit log entries themselves.
Fixes: 8daa8fde3f ("netfilter: nf_tables: Introduce NFT_MSG_GETRULE_RESET")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e9be1124d ]
Since set element reset is not integrated into nf_tables' transaction
logic, an explicit log call is needed, similar to NFT_MSG_GETOBJ_RESET
handling.
For the sake of simplicity, catchall element reset will always generate
a dedicated log entry. This relieves nf_tables_dump_set() from having to
adjust the logged element count depending on whether a catchall element
was found or not.
Fixes: 079cd63321 ("netfilter: nf_tables: Introduce NFT_MSG_GETSETELEM_RESET")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9876cfe8ec ]
This sysctl has the very unusual behaviour of not allowing any user (even
CAP_SYS_ADMIN) to reduce the restriction setting, meaning that if you were
to set this sysctl to a more restrictive option in the host pidns you
would need to reboot your machine in order to reset it.
The justification given in [1] is that this is a security feature and thus
it should not be possible to disable. Aside from the fact that we have
plenty of security-related sysctls that can be disabled after being
enabled (fs.protected_symlinks for instance), the protection provided by
the sysctl is to stop users from being able to create a binary and then
execute it. A user with CAP_SYS_ADMIN can trivially do this without
memfd_create(2):
% cat mount-memfd.c
#include <fcntl.h>
#include <string.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <linux/mount.h>
#define SHELLCODE "#!/bin/echo this file was executed from this totally private tmpfs:"
int main(void)
{
int fsfd = fsopen("tmpfs", FSOPEN_CLOEXEC);
assert(fsfd >= 0);
assert(!fsconfig(fsfd, FSCONFIG_CMD_CREATE, NULL, NULL, 2));
int dfd = fsmount(fsfd, FSMOUNT_CLOEXEC, 0);
assert(dfd >= 0);
int execfd = openat(dfd, "exe", O_CREAT | O_RDWR | O_CLOEXEC, 0782);
assert(execfd >= 0);
assert(write(execfd, SHELLCODE, strlen(SHELLCODE)) == strlen(SHELLCODE));
assert(!close(execfd));
char *execpath = NULL;
char *argv[] = { "bad-exe", NULL }, *envp[] = { NULL };
execfd = openat(dfd, "exe", O_PATH | O_CLOEXEC);
assert(execfd >= 0);
assert(asprintf(&execpath, "/proc/self/fd/%d", execfd) > 0);
assert(!execve(execpath, argv, envp));
}
% ./mount-memfd
this file was executed from this totally private tmpfs: /proc/self/fd/5
%
Given that it is possible for CAP_SYS_ADMIN users to create executable
binaries without memfd_create(2) and without touching the host filesystem
(not to mention the many other things a CAP_SYS_ADMIN process would be
able to do that would be equivalent or worse), it seems strange to cause a
fair amount of headache to admins when there doesn't appear to be an
actual security benefit to blocking this. There appear to be concerns
about confused-deputy-esque attacks[2] but a confused deputy that can
write to arbitrary sysctls is a bigger security issue than executable
memfds.
/* New API */
The primary requirement from the original author appears to be more based
on the need to be able to restrict an entire system in a hierarchical
manner[3], such that child namespaces cannot re-enable executable memfds.
So, implement that behaviour explicitly -- the vm.memfd_noexec scope is
evaluated up the pidns tree to &init_pid_ns and you have the most
restrictive value applied to you. The new lower limit you can set
vm.memfd_noexec is whatever limit applies to your parent.
Note that a pidns will inherit a copy of the parent pidns's effective
vm.memfd_noexec setting at unshare() time. This matches the existing
behaviour, and it also ensures that a pidns will never have its
vm.memfd_noexec setting *lowered* behind its back (but it will be raised
if the parent raises theirs).
/* Backwards Compatibility */
As the previous version of the sysctl didn't allow you to lower the
setting at all, there are no backwards compatibility issues with this
aspect of the change.
However it should be noted that now that the setting is completely
hierarchical. Previously, a cloned pidns would just copy the current
pidns setting, meaning that if the parent's vm.memfd_noexec was changed it
wouldn't propoagate to existing pid namespaces. Now, the restriction
applies recursively. This is a uAPI change, however:
* The sysctl is very new, having been merged in 6.3.
* Several aspects of the sysctl were broken up until this patchset and
the other patchset by Jeff Xu last month.
And thus it seems incredibly unlikely that any real users would run into
this issue. In the worst case, if this causes userspace isues we could
make it so that modifying the setting follows the hierarchical rules but
the restriction checking uses the cached copy.
[1]: https://lore.kernel.org/CABi2SkWnAgHK1i6iqSqPMYuNEhtHBkO8jUuCvmG3RmUB5TKHJw@mail.gmail.com/
[2]: https://lore.kernel.org/CALmYWFs_dNCzw_pW1yRAo4bGCPEtykroEQaowNULp7svwMLjOg@mail.gmail.com/
[3]: https://lore.kernel.org/CALmYWFuahdUF7cT4cm7_TGLqPanuHXJ-hVSfZt7vpTnc18DPrw@mail.gmail.com/
Link: https://lkml.kernel.org/r/20230814-memfd-vm-noexec-uapi-fixes-v2-4-7ff9e3e10ba6@cyphar.com
Fixes: 105ff5339f ("mm/memfd: add MFD_NOEXEC_SEAL and MFD_EXEC")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d75e30dddf upstream.
After we converted the capabilities of our networking-bpf program from
cap_sys_admin to cap_net_admin+cap_bpf, our networking-bpf program
failed to start. Because it failed the bpf verifier, and the error log
is "R3 pointer comparison prohibited".
A simple reproducer as follows,
SEC("cls-ingress")
int ingress(struct __sk_buff *skb)
{
struct iphdr *iph = (void *)(long)skb->data + sizeof(struct ethhdr);
if ((long)(iph + 1) > (long)skb->data_end)
return TC_ACT_STOLEN;
return TC_ACT_OK;
}
Per discussion with Yonghong and Alexei [1], comparison of two packet
pointers is not a pointer leak. This patch fixes it.
Our local kernel is 6.1.y and we expect this fix to be backported to
6.1.y, so stable is CCed.
[1]. https://lore.kernel.org/bpf/CAADnVQ+Nmspr7Si+pxWn8zkE7hX-7s93ugwC+94aXSy4uQ9vBg@mail.gmail.com/
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230823020703.3790-2-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b8272ff4a upstream.
Xiongfeng reported and debugged a self deadlock of the task which initiates
and controls a CPU hot-unplug operation vs. the CFS bandwidth timer.
CPU1 CPU2
T1 sets cfs_quota
starts hrtimer cfs_bandwidth 'period_timer'
T1 is migrated to CPU2
T1 initiates offlining of CPU1
Hotplug operation starts
...
'period_timer' expires and is re-enqueued on CPU1
...
take_cpu_down()
CPU1 shuts down and does not handle timers
anymore. They have to be migrated in the
post dead hotplug steps by the control task.
T1 runs the post dead offline operation
T1 is scheduled out
T1 waits for 'period_timer' to expire
T1 waits there forever if it is scheduled out before it can execute the hrtimer
offline callback hrtimers_dead_cpu().
Cure this by delegating the hotplug control operation to a worker thread on
an online CPU. This takes the initiating user space task, which might be
affected by the bandwidth timer, completely out of the picture.
Reported-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Yu Liao <liaoyu15@huawei.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/8e785777-03aa-99e1-d20e-e956f5685be6@huawei.com
Link: https://lore.kernel.org/r/87h6oqdq0i.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53e9e33ede upstream.
If an output buffer size exceeded U16_MAX, the min_t(u16, ...) cast in
copy_data() was causing writes to truncate. This manifested as output
bytes being skipped, seen as %NUL bytes in pstore dumps when the available
record size was larger than 65536. Fix the cast to no longer truncate
the calculation.
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Reported-by: Vijay Balakrishna <vijayb@linux.microsoft.com>
Link: https://lore.kernel.org/lkml/d8bb1ec7-a4c5-43a2-9de0-9643a70b899f@linux.microsoft.com/
Fixes: b6cf8b3f33 ("printk: add lockless ringbuffer")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Vijay Balakrishna <vijayb@linux.microsoft.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Reviewed-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Tested-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230811054528.never.165-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3163f635b2 ]
Warning happened in rb_end_commit() at code:
if (RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing)))
WARNING: CPU: 0 PID: 139 at kernel/trace/ring_buffer.c:3142
rb_commit+0x402/0x4a0
Call Trace:
ring_buffer_unlock_commit+0x42/0x250
trace_buffer_unlock_commit_regs+0x3b/0x250
trace_event_buffer_commit+0xe5/0x440
trace_event_buffer_reserve+0x11c/0x150
trace_event_raw_event_sched_switch+0x23c/0x2c0
__traceiter_sched_switch+0x59/0x80
__schedule+0x72b/0x1580
schedule+0x92/0x120
worker_thread+0xa0/0x6f0
It is because the race between writing event into cpu buffer and swapping
cpu buffer through file per_cpu/cpu0/snapshot:
Write on CPU 0 Swap buffer by per_cpu/cpu0/snapshot on CPU 1
-------- --------
tracing_snapshot_write()
[...]
ring_buffer_lock_reserve()
cpu_buffer = buffer->buffers[cpu]; // 1. Suppose find 'cpu_buffer_a';
[...]
rb_reserve_next_event()
[...]
ring_buffer_swap_cpu()
if (local_read(&cpu_buffer_a->committing))
goto out_dec;
if (local_read(&cpu_buffer_b->committing))
goto out_dec;
buffer_a->buffers[cpu] = cpu_buffer_b;
buffer_b->buffers[cpu] = cpu_buffer_a;
// 2. cpu_buffer has swapped here.
rb_start_commit(cpu_buffer);
if (unlikely(READ_ONCE(cpu_buffer->buffer)
!= buffer)) { // 3. This check passed due to 'cpu_buffer->buffer'
[...] // has not changed here.
return NULL;
}
cpu_buffer_b->buffer = buffer_a;
cpu_buffer_a->buffer = buffer_b;
[...]
// 4. Reserve event from 'cpu_buffer_a'.
ring_buffer_unlock_commit()
[...]
cpu_buffer = buffer->buffers[cpu]; // 5. Now find 'cpu_buffer_b' !!!
rb_commit(cpu_buffer)
rb_end_commit() // 6. WARN for the wrong 'committing' state !!!
Based on above analysis, we can easily reproduce by following testcase:
``` bash
#!/bin/bash
dmesg -n 7
sysctl -w kernel.panic_on_warn=1
TR=/sys/kernel/tracing
echo 7 > ${TR}/buffer_size_kb
echo "sched:sched_switch" > ${TR}/set_event
while [ true ]; do
echo 1 > ${TR}/per_cpu/cpu0/snapshot
done &
while [ true ]; do
echo 1 > ${TR}/per_cpu/cpu0/snapshot
done &
while [ true ]; do
echo 1 > ${TR}/per_cpu/cpu0/snapshot
done &
```
To fix it, IIUC, we can use smp_call_function_single() to do the swap on
the target cpu where the buffer is located, so that above race would be
avoided.
Link: https://lore.kernel.org/linux-trace-kernel/20230831132739.4070878-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Fixes: f1affcaaa8 ("tracing: Add snapshot in the per_cpu trace directories")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cf0dee989 ]
Space is printed after each mode value including the last one:
$ echo \"$(sudo cat /sys/kernel/tracing/hwlat_detector/mode)\"
"none [round-robin] per-cpu "
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lore.kernel.org/linux-trace-kernel/20230825103432.7750-1-m.kobuk@ispras.ru
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 8fa826b734 ("trace/hwlat: Implement the mode config option")
Signed-off-by: Mikhail Kobuk <m.kobuk@ispras.ru>
Reviewed-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96c1fa04f0 ]
In commit 0345691b24 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") the
new function report_idle_softirq() was created by breaking code out of the
existing can_stop_idle_tick() for kernels v5.18 and newer.
In doing so, the code essentially went from a one conditional:
if (a && b && c)
warn();
to a three conditional:
if (!a)
return;
if (!b)
return;
if (!c)
return;
warn();
But that conversion got the condition for the RT specific
local_bh_blocked() wrong. The original condition was:
!local_bh_blocked()
but the conversion failed to negate it so it ended up as:
if (!local_bh_blocked())
return false;
This issue lay dormant until another fixup for the same commit was added
in commit a7e282c777 ("tick/rcu: Fix bogus ratelimit condition").
This commit realized the ratelimit was essentially set to zero instead
of ten, and hence *no* softirq pending messages would ever be issued.
Once this commit was backported via linux-stable, both the v6.1 and v6.4
preempt-rt kernels started printing out 10 instances of this at boot:
NOHZ tick-stop error: local softirq work is pending, handler #80!!!
Remove the negation and return when local_bh_blocked() evaluates to true to
bring the correct behaviour back.
Fixes: 0345691b24 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle")
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Wen Yang <wenyang.linux@foxmail.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230818200757.1808398-1-paul.gortmaker@windriver.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82b90b6c5b ]
cgroup_namspace_init() just return 0. Therefore, there is no need to
call it during start_kernel. Just remove it.
Fixes: a79a908fd2 ("cgroup: introduce cgroup namespaces")
Signed-off-by: Lu Jialin <lujialin4@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8c926200c ]
Since commit f28e22441f ("cgroup/cpuset: Add a new isolated
cpus.partition type"), the CS_SCHED_LOAD_BALANCE bit of a v2 cpuset
can be on or off. The child cpusets of a partition root must have the
same setting as its parent or it may screw up the rebuilding of sched
domains. Fix this problem by making sure the a child v2 cpuset will
follows its parent cpuset load balance state unless the child cpuset
is a new partition root itself.
Fixes: f28e22441f ("cgroup/cpuset: Add a new isolated cpus.partition type")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b59bc6e372 ]
Tracefs or debugfs maybe cause hundreds to thousands of PATH records,
too many PATH records maybe cause soft lockup.
For example:
1. CONFIG_KASAN=y && CONFIG_PREEMPTION=n
2. auditctl -a exit,always -S open -k key
3. sysctl -w kernel.watchdog_thresh=5
4. mkdir /sys/kernel/debug/tracing/instances/test
There may be a soft lockup as follows:
watchdog: BUG: soft lockup - CPU#45 stuck for 7s! [mkdir:15498]
Kernel panic - not syncing: softlockup: hung tasks
Call trace:
dump_backtrace+0x0/0x30c
show_stack+0x20/0x30
dump_stack+0x11c/0x174
panic+0x27c/0x494
watchdog_timer_fn+0x2bc/0x390
__run_hrtimer+0x148/0x4fc
__hrtimer_run_queues+0x154/0x210
hrtimer_interrupt+0x2c4/0x760
arch_timer_handler_phys+0x48/0x60
handle_percpu_devid_irq+0xe0/0x340
__handle_domain_irq+0xbc/0x130
gic_handle_irq+0x78/0x460
el1_irq+0xb8/0x140
__audit_inode_child+0x240/0x7bc
tracefs_create_file+0x1b8/0x2a0
trace_create_file+0x18/0x50
event_create_dir+0x204/0x30c
__trace_add_new_event+0xac/0x100
event_trace_add_tracer+0xa0/0x130
trace_array_create_dir+0x60/0x140
trace_array_create+0x1e0/0x370
instance_mkdir+0x90/0xd0
tracefs_syscall_mkdir+0x68/0xa0
vfs_mkdir+0x21c/0x34c
do_mkdirat+0x1b4/0x1d4
__arm64_sys_mkdirat+0x4c/0x60
el0_svc_common.constprop.0+0xa8/0x240
do_el0_svc+0x8c/0xc0
el0_svc+0x20/0x30
el0_sync_handler+0xb0/0xb4
el0_sync+0x160/0x180
Therefore, we add cond_resched() to __audit_inode_child() to fix it.
Fixes: 5195d8e217 ("audit: dynamically allocate audit_names when not enough space is in the names array")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6785b2edf4 ]
The commit being fixed introduced a hunk into check_func_arg_reg_off
that bypasses reg->off == 0 enforcement when offset points to a graph
node or root. This might possibly be done for treating bpf_rbtree_remove
and others as KF_RELEASE and then later check correct reg->off in helper
argument checks.
But this is not the case, those helpers are already not KF_RELEASE and
permit non-zero reg->off and verify it later to match the subobject in
BTF type.
However, this logic leads to bpf_obj_drop permitting free of register
arguments with non-zero offset when they point to a graph root or node
within them, which is not ok.
For instance:
struct foo {
int i;
int j;
struct bpf_rb_node node;
};
struct foo *f = bpf_obj_new(typeof(*f));
if (!f) ...
bpf_obj_drop(f); // OK
bpf_obj_drop(&f->i); // still ok from verifier PoV
bpf_obj_drop(&f->node); // Not OK, but permitted right now
Fix this by dropping the whole part of code altogether.
Fixes: 6a3cd3318f ("bpf: Migrate release_on_unlock logic to non-owning ref semantics")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230822175140.1317749-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab6c637ad0 ]
When reviewing local percpu kptr support, Alexei discovered a bug
wherea bpf_kptr_xchg() may succeed even if the map value kptr type and
locally allocated obj type do not match ([1]). Missed struct btf_id
comparison is the reason for the bug. This patch added such struct btf_id
comparison and will flag verification failure if types do not match.
[1] https://lore.kernel.org/bpf/20230819002907.io3iphmnuk43xblu@macbook-pro-8.dhcp.thefacebook.com/#t
Reported-by: Alexei Starovoitov <ast@kernel.org>
Fixes: 738c96d5e2 ("bpf: Allow local kptrs to be exchanged via bpf_kptr_xchg")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230822050053.2886960-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
