In order to perform future tests against the cred saved during open(),
switch kallsyms_show_value() to operate on a cred, and have all current
callers pass current_cred(). This makes it very obvious where callers
are checking the wrong credential in their "read" contexts. These will
be fixed in the coming patches.
Additionally switch return value to bool, since it is always used as a
direct permission check, not a 0-on-success, negative-on-error style
function return.
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
flush_icache_range generally operates on kernel addresses, but for some
reason m68k needed a set_fs override. Move that into the m68k code
insted of keeping it in the module loader.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lkml.kernel.org/r/20200515143646.3857579-30-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Summary of modules changes for the 5.8 merge window:
- Harden CONFIG_STRICT_MODULE_RWX by rejecting any module that has
SHF_WRITE|SHF_EXECINSTR sections
- Remove and clean up nested #ifdefs, as it makes code hard to read
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEVrp26glSWYuDNrCUwEV+OM47wXIFAl7Z+qkQHGpleXVAa2Vy
bmVsLm9yZwAKCRDARX44zjvBcm+vEACo/JelhaEDjjLzVuTBN4FQfXgBRbh6CGeF
br7J1VtI9B0Coun0wfrDewwDieB2uHXQqivdC+KzNGXrBVhvFNLWuTTFcG7yce0K
KZlbVREpiTRlenEa6A5EdIdvH0Ttg/+PFfkvOvvQOrbx5woZKptG49VdII9mhPuE
LKnZk1xrK6jQLbOCPtUjyfB+eLqi0swhwstcfdIPUXsi2HtuLKmu7JPRpbW3Yz1v
0Y9xix7ByTSg+wsphiKgvDnoJ9TYC3bFlAwpw+A+tsOKE0pmyetWKvkJ/hH42W9D
7w6odSlG85d4ZExO2K8fHHsKmW2HgWx0cgLFf91sXCALqRYNjwTRkXH2OBXggLsz
n3k8PmTRkDwS1oElrNG9E4LjKhjFbZZpP4kz+VlVe7YAsnlYpOBOcroTuaiuSV/A
xmAP6mHgVAeUugwF5vHAPV4mwGJBLUVcvHENzge4jnyl/rSHsWE7hhwLnik9qkua
cWINAVhBJpQvk3nrDr0dmUAXRJ7CXXtyPBbNh8ivvA4XeDNBLcYr8mcHPLpAoN4C
xVcTRBxDXTRkw246zlQRcTySVpovtSv2C+IiaaHxA3j7lo4C1xhj6ihUIKz3Z1/A
70zvBxmg3zpMwZWiRGeasAIu69a0qvBh0AOfVTbHBrIp5RokibtdoyuOu7ZGOU9B
Un1WJNrSYQ==
=OlVv
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
- Harden CONFIG_STRICT_MODULE_RWX by rejecting any module that has
SHF_WRITE|SHF_EXECINSTR sections
- Remove and clean up nested #ifdefs, as it makes code hard to read
* tag 'modules-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Harden STRICT_MODULE_RWX
module: break nested ARCH_HAS_STRICT_MODULE_RWX and STRICT_MODULE_RWX #ifdefs
Pull livepatching updates from Jiri Kosina:
- simplifications and improvements for issues Peter Ziljstra found
during his previous work on W^X cleanups.
This allows us to remove livepatch arch-specific .klp.arch sections
and add proper support for jump labels in patched code.
Also, this patchset removes the last module_disable_ro() usage in the
tree.
Patches from Josh Poimboeuf and Peter Zijlstra
- a few other minor cleanups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
MAINTAINERS: add lib/livepatch to LIVE PATCHING
livepatch: add arch-specific headers to MAINTAINERS
livepatch: Make klp_apply_object_relocs static
MAINTAINERS: adjust to livepatch .klp.arch removal
module: Make module_enable_ro() static again
x86/module: Use text_mutex in apply_relocate_add()
module: Remove module_disable_ro()
livepatch: Remove module_disable_ro() usage
x86/module: Use text_poke() for late relocations
s390/module: Use s390_kernel_write() for late relocations
s390: Change s390_kernel_write() return type to match memcpy()
livepatch: Prevent module-specific KLP rela sections from referencing vmlinux symbols
livepatch: Remove .klp.arch
livepatch: Apply vmlinux-specific KLP relocations early
livepatch: Disallow vmlinux.ko
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
Merge updates from Andrew Morton:
"A few little subsystems and a start of a lot of MM patches.
Subsystems affected by this patch series: squashfs, ocfs2, parisc,
vfs. With mm subsystems: slab-generic, slub, debug, pagecache, gup,
swap, memcg, pagemap, memory-failure, vmalloc, kasan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits)
kasan: move kasan_report() into report.c
mm/mm_init.c: report kasan-tag information stored in page->flags
ubsan: entirely disable alignment checks under UBSAN_TRAP
kasan: fix clang compilation warning due to stack protector
x86/mm: remove vmalloc faulting
mm: remove vmalloc_sync_(un)mappings()
x86/mm/32: implement arch_sync_kernel_mappings()
x86/mm/64: implement arch_sync_kernel_mappings()
mm/ioremap: track which page-table levels were modified
mm/vmalloc: track which page-table levels were modified
mm: add functions to track page directory modifications
s390: use __vmalloc_node in stack_alloc
powerpc: use __vmalloc_node in alloc_vm_stack
arm64: use __vmalloc_node in arch_alloc_vmap_stack
mm: remove vmalloc_user_node_flags
mm: switch the test_vmalloc module to use __vmalloc_node
mm: remove __vmalloc_node_flags_caller
mm: remove both instances of __vmalloc_node_flags
mm: remove the prot argument to __vmalloc_node
mm: remove the pgprot argument to __vmalloc
...
- remove a now unnecessary usage of the KERNEL_DS for
sys_oabi_epoll_ctl()
- update my email address in a number of drivers
- decompressor EFI updates from Ard Biesheuvel
- module unwind section handling updates
- sparsemem Kconfig cleanups
- make act_mm macro respect THREAD_SIZE
-----BEGIN PGP SIGNATURE-----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=vMHE
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- remove a now unnecessary usage of the KERNEL_DS for
sys_oabi_epoll_ctl()
- update my email address in a number of drivers
- decompressor EFI updates from Ard Biesheuvel
- module unwind section handling updates
- sparsemem Kconfig cleanups
- make act_mm macro respect THREAD_SIZE
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8980/1: Allow either FLATMEM or SPARSEMEM on the multiplatform build
ARM: 8979/1: Remove redundant ARCH_SPARSEMEM_DEFAULT setting
ARM: 8978/1: mm: make act_mm() respect THREAD_SIZE
ARM: decompressor: run decompressor in place if loaded via UEFI
ARM: decompressor: move GOT into .data for EFI enabled builds
ARM: decompressor: defer loading of the contents of the LC0 structure
ARM: decompressor: split off _edata and stack base into separate object
ARM: decompressor: move headroom variable out of LC0
ARM: 8976/1: module: allow arch overrides for .init section names
ARM: 8975/1: module: fix handling of unwind init sections
ARM: 8974/1: use SPARSMEM_STATIC when SPARSEMEM is enabled
ARM: 8971/1: replace the sole use of a symbol with its definition
ARM: 8969/1: decompressor: simplify libfdt builds
Update rmk's email address in various drivers
ARM: compat: remove KERNEL_DS usage in sys_oabi_epoll_ctl()
Instrumentation is forbidden in the .noinstr.text section. Make kprobes
respect this.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20200505134100.179862032@linutronix.de
ARM stores unwind information for .init.text in sections named
.ARM.extab.init.text and .ARM.exidx.init.text. Since those aren't
currently recognized as init sections, they're allocated along with the
core section, and relocation fails if the core and the init section are
allocated from different regions and can't reach other.
final section addresses:
...
0x7f800000 .init.text
..
0xcbb54078 .ARM.exidx.init.text
..
section 16 reloc 0 sym '': relocation 42 out of range (0xcbb54078 ->
0x7f800000)
Allow architectures to override the section name so that ARM can fix
this.
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Support NOKPROBE_SYMBOL() in modules. NOKPROBE_SYMBOL() records only symbol
address in "_kprobe_blacklist" section in the module.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134059.771170126@linutronix.de
Support __kprobes attribute for blacklist functions in modules. The
__kprobes attribute functions are stored in .kprobes.text section.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134059.678201813@linutronix.de
Now that module_enable_ro() has no more external users, make it static
again.
Suggested-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
module_disable_ro() has no more users. Remove it.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
KLP relocations are livepatch-specific relocations which are applied to
a KLP module's text or data. They exist for two reasons:
1) Unexported symbols: replacement functions often need to access
unexported symbols (e.g. static functions), which "normal"
relocations don't allow.
2) Late module patching: this is the ability for a KLP module to
bypass normal module dependencies, such that the KLP module can be
loaded *before* a to-be-patched module. This means that
relocations which need to access symbols in the to-be-patched
module might need to be applied to the KLP module well after it has
been loaded.
Non-late-patched KLP relocations are applied from the KLP module's init
function. That usually works fine, unless the patched code wants to use
alternatives, paravirt patching, jump tables, or some other special
section which needs relocations. Then we run into ordering issues and
crashes.
In order for those special sections to work properly, the KLP
relocations should be applied *before* the special section init code
runs, such as apply_paravirt(), apply_alternatives(), or
jump_label_apply_nops().
You might think the obvious solution would be to move the KLP relocation
initialization earlier, but it's not necessarily that simple. The
problem is the above-mentioned late module patching, for which KLP
relocations can get applied well after the KLP module is loaded.
To "fix" this issue in the past, we created .klp.arch sections:
.klp.arch.{module}..altinstructions
.klp.arch.{module}..parainstructions
Those sections allow KLP late module patching code to call
apply_paravirt() and apply_alternatives() after the module-specific KLP
relocations (.klp.rela.{module}.{section}) have been applied.
But that has a lot of drawbacks, including code complexity, the need for
arch-specific code, and the (per-arch) danger that we missed some
special section -- for example the __jump_table section which is used
for jump labels.
It turns out there's a simpler and more functional approach. There are
two kinds of KLP relocation sections:
1) vmlinux-specific KLP relocation sections
.klp.rela.vmlinux.{sec}
These are relocations (applied to the KLP module) which reference
unexported vmlinux symbols.
2) module-specific KLP relocation sections
.klp.rela.{module}.{sec}:
These are relocations (applied to the KLP module) which reference
unexported or exported module symbols.
Up until now, these have been treated the same. However, they're
inherently different.
Because of late module patching, module-specific KLP relocations can be
applied very late, thus they can create the ordering headaches described
above.
But vmlinux-specific KLP relocations don't have that problem. There's
nothing to prevent them from being applied earlier. So apply them at
the same time as normal relocations, when the KLP module is being
loaded.
This means that for vmlinux-specific KLP relocations, we no longer have
any ordering issues. vmlinux-referencing jump labels, alternatives, and
paravirt patching will work automatically, without the need for the
.klp.arch hacks.
All that said, for module-specific KLP relocations, the ordering
problems still exist and we *do* still need .klp.arch. Or do we? Stay
tuned.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
VERMAGIC* definitions are not supposed to be used by the drivers,
see this [1] bug report, so introduce special define to guard inclusion
of this header file and define it in kernel/modules.h and in internal
script that generates *.mod.c files.
In-tree module build:
➜ kernel git:(vermagic) ✗ make clean
➜ kernel git:(vermagic) ✗ make M=drivers/infiniband/hw/mlx5
➜ kernel git:(vermagic) ✗ modinfo drivers/infiniband/hw/mlx5/mlx5_ib.ko
filename: /images/leonro/src/kernel/drivers/infiniband/hw/mlx5/mlx5_ib.ko
<...>
vermagic: 5.6.0+ SMP mod_unload modversions
Out-of-tree module build:
➜ mlx5 make -C /images/leonro/src/kernel clean M=/tmp/mlx5
➜ mlx5 make -C /images/leonro/src/kernel M=/tmp/mlx5
➜ mlx5 modinfo /tmp/mlx5/mlx5_ib.ko
filename: /tmp/mlx5/mlx5_ib.ko
<...>
vermagic: 5.6.0+ SMP mod_unload modversions
[1] https://lore.kernel.org/lkml/20200411155623.GA22175@zn.tnic
Reported-by: Borislav Petkov <bp@suse.de>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Jessica Yu <jeyu@kernel.org>
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We're very close to enforcing W^X memory, refuse to load modules that
violate this principle per construction.
[jeyu: move module_enforce_rwx_sections under STRICT_MODULE_RWX as per discussion]
Link: http://lore.kernel.org/r/20200403171303.GK20760@hirez.programming.kicks-ass.net
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Various frob_* and module_{enable,disable}_* functions are defined in a
CONFIG_ARCH_HAS_STRICT_MODULE_RWX ifdef block which also has a nested
CONFIG_STRICT_MODULE_RWX ifdef block within it. This is unecessary and
makes things hard to read. Not only that, this construction requires
redundant empty stubs for module_enable_nx(). I suspect this was
originally done for cosmetic reasons - to keep all the frob_* functions
in the same place, and all the module_{enable,disable}_* functions right
after, but as a result it made the code harder to read.
Make this more readable by unnesting the ifdef blocks and getting rid of
the redundant empty stubs.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Summary of modules changes for the 5.7 merge window:
- Trivial zero-length array to flexible-array cleanup
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=HWeX
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Only a small cleanup this time around: a trivial conversion of
zero-length arrays to flexible arrays"
* tag 'modules-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
kernel: module: Replace zero-length array with flexible-array member
Now that "struct proc_ops" exist we can start putting there stuff which
could not fly with VFS "struct file_operations"...
Most of fs/proc/inode.c file is dedicated to make open/read/.../close
reliable in the event of disappearing /proc entries which usually happens
if module is getting removed. Files like /proc/cpuinfo which never
disappear simply do not need such protection.
Save 2 atomic ops, 1 allocation, 1 free per open/read/close sequence for such
"permanent" files.
Enable "permanent" flag for
/proc/cpuinfo
/proc/kmsg
/proc/modules
/proc/slabinfo
/proc/stat
/proc/sysvipc/*
/proc/swaps
More will come once I figure out foolproof way to prevent out module
authors from marking their stuff "permanent" for performance reasons
when it is not.
This should help with scalability: benchmark is "read /proc/cpuinfo R times
by N threads scattered over the system".
N R t, s (before) t, s (after)
-----------------------------------------------------
64 4096 1.582458 1.530502 -3.2%
256 4096 6.371926 6.125168 -3.9%
1024 4096 25.64888 24.47528 -4.6%
Benchmark source:
#include <chrono>
#include <iostream>
#include <thread>
#include <vector>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
const int NR_CPUS = sysconf(_SC_NPROCESSORS_ONLN);
int N;
const char *filename;
int R;
int xxx = 0;
int glue(int n)
{
cpu_set_t m;
CPU_ZERO(&m);
CPU_SET(n, &m);
return sched_setaffinity(0, sizeof(cpu_set_t), &m);
}
void f(int n)
{
glue(n % NR_CPUS);
while (*(volatile int *)&xxx == 0) {
}
for (int i = 0; i < R; i++) {
int fd = open(filename, O_RDONLY);
char buf[4096];
ssize_t rv = read(fd, buf, sizeof(buf));
asm volatile ("" :: "g" (rv));
close(fd);
}
}
int main(int argc, char *argv[])
{
if (argc < 4) {
std::cerr << "usage: " << argv[0] << ' ' << "N /proc/filename R
";
return 1;
}
N = atoi(argv[1]);
filename = argv[2];
R = atoi(argv[3]);
for (int i = 0; i < NR_CPUS; i++) {
if (glue(i) == 0)
break;
}
std::vector<std::thread> T;
T.reserve(N);
for (int i = 0; i < N; i++) {
T.emplace_back(f, i);
}
auto t0 = std::chrono::system_clock::now();
{
*(volatile int *)&xxx = 1;
for (auto& t: T) {
t.join();
}
}
auto t1 = std::chrono::system_clock::now();
std::chrono::duration<double> dt = t1 - t0;
std::cout << dt.count() << '
';
return 0;
}
P.S.:
Explicit randomization marker is added because adding non-function pointer
will silently disable structure layout randomization.
[akpm@linux-foundation.org: coding style fixes]
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200222201539.GA22576@avx2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Summary of modules changes for the 5.6 merge window:
- Add "MS" (SHF_MERGE|SHF_STRINGS) section flags to __ksymtab_strings to
indicate to the linker that it can perform string deduplication (i.e.,
duplicate strings are reduced to a single copy in the string table).
This means any repeated namespace string would be merged to just one
entry in __ksymtab_strings.
- Various code cleanups and small fixes (fix small memleak in error path,
improve moduleparam docs, silence rcu warnings, improve error logging)
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=boqg
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Summary of modules changes for the 5.6 merge window:
- Add "MS" (SHF_MERGE|SHF_STRINGS) section flags to __ksymtab_strings
to indicate to the linker that it can perform string deduplication
(i.e., duplicate strings are reduced to a single copy in the string
table). This means any repeated namespace string would be merged to
just one entry in __ksymtab_strings.
- Various code cleanups and small fixes (fix small memleak in error
path, improve moduleparam docs, silence rcu warnings, improve error
logging)"
* tag 'modules-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module.h: Annotate mod_kallsyms with __rcu
module: avoid setting info->name early in case we can fall back to info->mod->name
modsign: print module name along with error message
kernel/module: Fix memleak in module_add_modinfo_attrs()
export.h: reduce __ksymtab_strings string duplication by using "MS" section flags
moduleparam: fix kerneldoc
modules: lockdep: Suppress suspicious RCU usage warning
In setup_load_info(), info->name (which contains the name of the module,
mostly used for early logging purposes before the module gets set up)
gets unconditionally assigned if .modinfo is missing despite the fact
that there is an if (!info->name) check near the end of the function.
Avoid assigning a placeholder string to info->name if .modinfo doesn't
exist, so that we can fall back to info->mod->name later on.
Fixes: 5fdc7db644 ("module: setup load info before module_sig_check()")
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
It is useful to know which module failed signature verification, so
print the module name along with the error message.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
In module_add_modinfo_attrs() if sysfs_create_file() fails
on the first iteration of the loop (so i = 0), we forget to
free the modinfo_attrs.
Fixes: bc6f2a757d ("kernel/module: Fix mem leak in module_add_modinfo_attrs")
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
- Removal of code I accidentally applied when doing a minor fix up
to a patch, and then using "git commit -a --amend", which pulled
in some other changes I was playing with.
- Remove an used variable in trace_events_inject code
- Fix to function graph tracer when it traces a ftrace direct function.
It will now ignore tracing a function that has a ftrace direct
tramploine attached. This is needed for eBPF to use the ftrace direct
code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXfD/thQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoo2AP4j7ONw7BTmMyo+GdYqPPntBeDnClHK
vfMKrgK1j5BxYgEA7LgkwuUT9bcyLjfJVcyfeW67rB2PtmovKTWnKihFOwI=
=DZ6N
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Remove code I accidentally applied when doing a minor fix up to a
patch, and then using "git commit -a --amend", which pulled in some
other changes I was playing with.
- Remove an used variable in trace_events_inject code
- Fix function graph tracer when it traces a ftrace direct function.
It will now ignore tracing a function that has a ftrace direct
tramploine attached. This is needed for eBPF to use the ftrace direct
code.
* tag 'trace-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix function_graph tracer interaction with BPF trampoline
tracing: remove set but not used variable 'buffer'
module: Remove accidental change of module_enable_x()
When pulling in Divya Indi's patch, I made a minor fix to remove unneeded
braces. I commited my fix up via "git commit -a --amend". Unfortunately, I
didn't realize I had some changes I was testing in the module code, and
those changes were applied to Divya's patch as well.
This reverts the accidental updates to the module code.
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Divya Indi <divya.indi@oracle.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Fixes: e585e6469d ("tracing: Verify if trace array exists before destroying it.")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
While running kprobe module test, find_module_all() caused
a suspicious RCU usage warning.
-----
=============================
WARNING: suspicious RCU usage
5.4.0-next-20191202+ #63 Not tainted
-----------------------------
kernel/module.c:619 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by rmmod/642:
#0: ffffffff8227da80 (module_mutex){+.+.}, at: __x64_sys_delete_module+0x9a/0x230
stack backtrace:
CPU: 0 PID: 642 Comm: rmmod Not tainted 5.4.0-next-20191202+ #63
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack+0x71/0xa0
find_module_all+0xc1/0xd0
__x64_sys_delete_module+0xac/0x230
? do_syscall_64+0x12/0x1f0
do_syscall_64+0x50/0x1f0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4b6d49
-----
This is because list_for_each_entry_rcu(modules) is called
without rcu_read_lock(). This is safe because the module_mutex
is locked.
Pass lockdep_is_held(&module_mutex) to the list_for_each_entry_rcu()
to suppress this warning, This also fixes similar issue in
mod_find() and each_symbol_section().
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Summary of modules changes for the 5.5 merge window:
- Refactor include/linux/export.h and remove code duplication between
EXPORT_SYMBOL and EXPORT_SYMBOL_NS to make it more readable. The most
notable change is that no namespace is represented by an empty string ""
rather than NULL.
- Fix a module load/unload race where waiter(s) trying to load the same
module weren't being woken up when a module finally goes away.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XDci
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules updates from Jessica Yu:
"Summary of modules changes for the 5.5 merge window:
- Refactor include/linux/export.h and remove code duplication between
EXPORT_SYMBOL and EXPORT_SYMBOL_NS to make it more readable.
The most notable change is that no namespace is represented by an
empty string "" rather than NULL.
- Fix a module load/unload race where waiter(s) trying to load the
same module weren't being woken up when a module finally goes away"
* tag 'modules-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
kernel/module.c: wakeup processes in module_wq on module unload
moduleparam: fix parameter description mismatch
export: avoid code duplication in include/linux/export.h
- PERAMAENT flag to ftrace_ops when attaching a callback to a function
As /proc/sys/kernel/ftrace_enabled when set to zero will disable all
attached callbacks in ftrace, this has a detrimental impact on live
kernel tracing, as it disables all that it patched. If a ftrace_ops
is registered to ftrace with the PERMANENT flag set, it will prevent
ftrace_enabled from being disabled, and if ftrace_enabled is already
disabled, it will prevent a ftrace_ops with PREMANENT flag set from
being registered.
- New register_ftrace_direct(). As eBPF would like to register its own
trampolines to be called by the ftrace nop locations directly,
without going through the ftrace trampoline, this function has been
added. This allows for eBPF trampolines to live along side of
ftrace, perf, kprobe and live patching. It also utilizes the ftrace
enabled_functions file that keeps track of functions that have been
modified in the kernel, to allow for security auditing.
- Allow for kernel internal use of ftrace instances. Subsystems in
the kernel can now create and destroy their own tracing instances
which allows them to have their own tracing buffer, and be able
to record events without worrying about other users from writing over
their data.
- New seq_buf_hex_dump() that lets users use the hex_dump() in their
seq_buf usage.
- Notifications now added to tracing_max_latency to allow user space
to know when a new max latency is hit by one of the latency tracers.
- Wider spread use of generic compare operations for use of bsearch and
friends.
- More synthetic event fields may be defined (32 up from 16)
- Use of xarray for architectures with sparse system calls, for the
system call trace events.
This along with small clean ups and fixes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXdwv4BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnB5AP91vsdHQjwE1+/UWG/cO+qFtKvn2QJK
QmBRIJNH/s+1TAD/fAOhgw+ojSK3o/qc+NpvPTEW9AEwcJL1wacJUn+XbQc=
=ztql
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New tracing features:
- New PERMANENT flag to ftrace_ops when attaching a callback to a
function.
As /proc/sys/kernel/ftrace_enabled when set to zero will disable
all attached callbacks in ftrace, this has a detrimental impact on
live kernel tracing, as it disables all that it patched. If a
ftrace_ops is registered to ftrace with the PERMANENT flag set, it
will prevent ftrace_enabled from being disabled, and if
ftrace_enabled is already disabled, it will prevent a ftrace_ops
with PREMANENT flag set from being registered.
- New register_ftrace_direct().
As eBPF would like to register its own trampolines to be called by
the ftrace nop locations directly, without going through the ftrace
trampoline, this function has been added. This allows for eBPF
trampolines to live along side of ftrace, perf, kprobe and live
patching. It also utilizes the ftrace enabled_functions file that
keeps track of functions that have been modified in the kernel, to
allow for security auditing.
- Allow for kernel internal use of ftrace instances.
Subsystems in the kernel can now create and destroy their own
tracing instances which allows them to have their own tracing
buffer, and be able to record events without worrying about other
users from writing over their data.
- New seq_buf_hex_dump() that lets users use the hex_dump() in their
seq_buf usage.
- Notifications now added to tracing_max_latency to allow user space
to know when a new max latency is hit by one of the latency
tracers.
- Wider spread use of generic compare operations for use of bsearch
and friends.
- More synthetic event fields may be defined (32 up from 16)
- Use of xarray for architectures with sparse system calls, for the
system call trace events.
This along with small clean ups and fixes"
* tag 'trace-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (51 commits)
tracing: Enable syscall optimization for MIPS
tracing: Use xarray for syscall trace events
tracing: Sample module to demonstrate kernel access to Ftrace instances.
tracing: Adding new functions for kernel access to Ftrace instances
tracing: Fix Kconfig indentation
ring-buffer: Fix typos in function ring_buffer_producer
ftrace: Use BIT() macro
ftrace: Return ENOTSUPP when DYNAMIC_FTRACE_WITH_DIRECT_CALLS is not configured
ftrace: Rename ftrace_graph_stub to ftrace_stub_graph
ftrace: Add a helper function to modify_ftrace_direct() to allow arch optimization
ftrace: Add helper find_direct_entry() to consolidate code
ftrace: Add another check for match in register_ftrace_direct()
ftrace: Fix accounting bug with direct->count in register_ftrace_direct()
ftrace/selftests: Fix spelling mistake "wakeing" -> "waking"
tracing: Increase SYNTH_FIELDS_MAX for synthetic_events
ftrace/samples: Add a sample module that implements modify_ftrace_direct()
ftrace: Add modify_ftrace_direct()
tracing: Add missing "inline" in stub function of latency_fsnotify()
tracing: Remove stray tab in TRACE_EVAL_MAP_FILE's help text
tracing: Use seq_buf_hex_dump() to dump buffers
...
Now that there are no users of set_all_modules_text_*() left, remove
it.
While it appears nds32 uses it, it does not have STRICT_MODULE_RWX and
therefore ends up with the NOP stubs.
Tested-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Chen <deanbo422@gmail.com>
Link: https://lkml.kernel.org/r/20191111132458.284298307@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix the race between load and unload a kernel module.
sys_delete_module()
try_stop_module()
mod->state = _GOING
add_unformed_module()
old = find_module_all()
(old->state == _GOING =>
wait_event_interruptible())
During pre-condition
finished_loading() rets 0
schedule()
(never gets waken up later)
free_module()
mod->state = _UNFORMED
list_del_rcu(&mod->list)
(dels mod from "modules" list)
return
The race above leads to modprobe hanging forever on loading
a module.
Error paths on loading module call wake_up_all(&module_wq) after
freeing module, so let's do the same on straight module unload.
Fixes: 6e6de3dee5 ("kernel/module.c: Only return -EEXIST for modules that have finished loading")
Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
A trace array can be destroyed from userspace or kernel. Verify if the
trace array exists before proceeding to destroy/remove it.
Link: http://lkml.kernel.org/r/1565805327-579-3-git-send-email-divya.indi@oracle.com
Reviewed-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Divya Indi <divya.indi@oracle.com>
[ Removed unneeded braces ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When using patchable-function-entry, the compiler will record the
callsites into a section named "__patchable_function_entries" rather
than "__mcount_loc". Let's abstract this difference behind a new
FTRACE_CALLSITE_SECTION, so that architectures don't have to handle this
explicitly (e.g. with custom module linker scripts).
As parisc currently handles this explicitly, it is fixed up accordingly,
with its custom linker script removed. Since FTRACE_CALLSITE_SECTION is
only defined when DYNAMIC_FTRACE is selected, the parisc module loading
code is updated to only use the definition in that case. When
DYNAMIC_FTRACE is not selected, modules shouldn't have this section, so
this removes some redundant work in that case.
To make sure that this is keep up-to-date for modules and the main
kernel, a comment is added to vmlinux.lds.h, with the existing ifdeffery
simplified for legibility.
I built parisc generic-{32,64}bit_defconfig with DYNAMIC_FTRACE enabled,
and verified that the section made it into the .ko files for modules.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Helge Deller <deller@gmx.de>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Torsten Duwe <duwe@suse.de>
Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Tested-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Torsten Duwe <duwe@suse.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: linux-parisc@vger.kernel.org
include/linux/export.h has lots of code duplication between
EXPORT_SYMBOL and EXPORT_SYMBOL_NS.
To improve the maintainability and readability, unify the
implementation.
When the symbol has no namespace, pass the empty string "" to
the 'ns' parameter.
The drawback of this change is, it grows the code size.
When the symbol has no namespace, sym->namespace was previously
NULL, but it is now an empty string "". So, it increases 1 byte
for every no namespace EXPORT_SYMBOL.
A typical kernel configuration has 10K exported symbols, so it
increases 10KB in rough estimation.
I did not come up with a good idea to refactor it without increasing
the code size.
I am not sure how big a deal it is, but at least include/linux/export.h
looks nicer.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[maennich: rebase on top of 3 fixes for the namespace feature]
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Pull kernel lockdown mode from James Morris:
"This is the latest iteration of the kernel lockdown patchset, from
Matthew Garrett, David Howells and others.
From the original description:
This patchset introduces an optional kernel lockdown feature,
intended to strengthen the boundary between UID 0 and the kernel.
When enabled, various pieces of kernel functionality are restricted.
Applications that rely on low-level access to either hardware or the
kernel may cease working as a result - therefore this should not be
enabled without appropriate evaluation beforehand.
The majority of mainstream distributions have been carrying variants
of this patchset for many years now, so there's value in providing a
doesn't meet every distribution requirement, but gets us much closer
to not requiring external patches.
There are two major changes since this was last proposed for mainline:
- Separating lockdown from EFI secure boot. Background discussion is
covered here: https://lwn.net/Articles/751061/
- Implementation as an LSM, with a default stackable lockdown LSM
module. This allows the lockdown feature to be policy-driven,
rather than encoding an implicit policy within the mechanism.
The new locked_down LSM hook is provided to allow LSMs to make a
policy decision around whether kernel functionality that would allow
tampering with or examining the runtime state of the kernel should be
permitted.
The included lockdown LSM provides an implementation with a simple
policy intended for general purpose use. This policy provides a coarse
level of granularity, controllable via the kernel command line:
lockdown={integrity|confidentiality}
Enable the kernel lockdown feature. If set to integrity, kernel features
that allow userland to modify the running kernel are disabled. If set to
confidentiality, kernel features that allow userland to extract
confidential information from the kernel are also disabled.
This may also be controlled via /sys/kernel/security/lockdown and
overriden by kernel configuration.
New or existing LSMs may implement finer-grained controls of the
lockdown features. Refer to the lockdown_reason documentation in
include/linux/security.h for details.
The lockdown feature has had signficant design feedback and review
across many subsystems. This code has been in linux-next for some
weeks, with a few fixes applied along the way.
Stephen Rothwell noted that commit 9d1f8be5cf ("bpf: Restrict bpf
when kernel lockdown is in confidentiality mode") is missing a
Signed-off-by from its author. Matthew responded that he is providing
this under category (c) of the DCO"
* 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits)
kexec: Fix file verification on S390
security: constify some arrays in lockdown LSM
lockdown: Print current->comm in restriction messages
efi: Restrict efivar_ssdt_load when the kernel is locked down
tracefs: Restrict tracefs when the kernel is locked down
debugfs: Restrict debugfs when the kernel is locked down
kexec: Allow kexec_file() with appropriate IMA policy when locked down
lockdown: Lock down perf when in confidentiality mode
bpf: Restrict bpf when kernel lockdown is in confidentiality mode
lockdown: Lock down tracing and perf kprobes when in confidentiality mode
lockdown: Lock down /proc/kcore
x86/mmiotrace: Lock down the testmmiotrace module
lockdown: Lock down module params that specify hardware parameters (eg. ioport)
lockdown: Lock down TIOCSSERIAL
lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down
acpi: Disable ACPI table override if the kernel is locked down
acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down
ACPI: Limit access to custom_method when the kernel is locked down
x86/msr: Restrict MSR access when the kernel is locked down
x86: Lock down IO port access when the kernel is locked down
...
Pull integrity updates from Mimi Zohar:
"The major feature in this time is IMA support for measuring and
appraising appended file signatures. In addition are a couple of bug
fixes and code cleanup to use struct_size().
In addition to the PE/COFF and IMA xattr signatures, the kexec kernel
image may be signed with an appended signature, using the same
scripts/sign-file tool that is used to sign kernel modules.
Similarly, the initramfs may contain an appended signature.
This contained a lot of refactoring of the existing appended signature
verification code, so that IMA could retain the existing framework of
calculating the file hash once, storing it in the IMA measurement list
and extending the TPM, verifying the file's integrity based on a file
hash or signature (eg. xattrs), and adding an audit record containing
the file hash, all based on policy. (The IMA support for appended
signatures patch set was posted and reviewed 11 times.)
The support for appended signature paves the way for adding other
signature verification methods, such as fs-verity, based on a single
system-wide policy. The file hash used for verifying the signature and
the signature, itself, can be included in the IMA measurement list"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: ima_api: Use struct_size() in kzalloc()
ima: use struct_size() in kzalloc()
sefltest/ima: support appended signatures (modsig)
ima: Fix use after free in ima_read_modsig()
MODSIGN: make new include file self contained
ima: fix freeing ongoing ahash_request
ima: always return negative code for error
ima: Store the measurement again when appraising a modsig
ima: Define ima-modsig template
ima: Collect modsig
ima: Implement support for module-style appended signatures
ima: Factor xattr_verify() out of ima_appraise_measurement()
ima: Add modsig appraise_type option for module-style appended signatures
integrity: Select CONFIG_KEYS instead of depending on it
PKCS#7: Introduce pkcs7_get_digest()
PKCS#7: Refactor verify_pkcs7_signature()
MODSIGN: Export module signature definitions
ima: initialize the "template" field with the default template
You can pass opaque pointers directly.
I also renamed 'va' and 'vb' into more meaningful arguments.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Commit 8651ec01da ("module: add support for symbol namespaces.")
broke linking for arm64 defconfig:
| lib/crypto/arc4.o: In function `__ksymtab_arc4_setkey':
| arc4.c:(___ksymtab+arc4_setkey+0x8): undefined reference to `no symbol'
| lib/crypto/arc4.o: In function `__ksymtab_arc4_crypt':
| arc4.c:(___ksymtab+arc4_crypt+0x8): undefined reference to `no symbol'
This is because the dummy initialisation of the 'namespace_offset' field
in 'struct kernel_symbol' when using EXPORT_SYMBOL on architectures with
support for PREL32 locations uses an offset from an absolute address (0)
in an effort to trick 'offset_to_pointer' into behaving as a NOP,
allowing non-namespaced symbols to be treated in the same way as those
belonging to a namespace.
Unfortunately, place-relative relocations require a symbol reference
rather than an absolute value and, although x86 appears to get away with
this due to placing the kernel text at the top of the address space, it
almost certainly results in a runtime failure if the kernel is relocated
dynamically as a result of KASLR.
Rework 'namespace_offset' so that a value of 0, which cannot occur for a
valid namespaced symbol, indicates that the corresponding symbol does
not belong to a namespace.
Cc: Matthias Maennich <maennich@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 8651ec01da ("module: add support for symbol namespaces.")
Reported-by: kbuild test robot <lkp@intel.com>
Tested-by: Matthias Maennich <maennich@google.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Matthias Maennich <maennich@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
If MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is enabled (default=n), the
requirement for modules to import all namespaces that are used by
the module is relaxed.
Enabling this option effectively allows (invalid) modules to be loaded
while only a warning is emitted.
Disabling this option keeps the enforcement at module loading time and
loading is denied if the module's imports are not satisfactory.
Reviewed-by: Martijn Coenen <maco@android.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
The EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL() macros can be used to
export a symbol to a specific namespace. There are no _GPL_FUTURE and
_UNUSED variants because these are currently unused, and I'm not sure
they are necessary.
I didn't add EXPORT_SYMBOL_NS() for ASM exports; this patch sets the
namespace of ASM exports to NULL by default. In case of relative
references, it will be relocatable to NULL. If there's a need, this
should be pretty easy to add.
A module that wants to use a symbol exported to a namespace must add a
MODULE_IMPORT_NS() statement to their module code; otherwise, modpost
will complain when building the module, and the kernel module loader
will emit an error and fail when loading the module.
MODULE_IMPORT_NS() adds a modinfo tag 'import_ns' to the module. That
tag can be observed by the modinfo command, modpost and kernel/module.c
at the time of loading the module.
The ELF symbols are renamed to include the namespace with an asm label;
for example, symbol 'usb_stor_suspend' in namespace USB_STORAGE becomes
'usb_stor_suspend.USB_STORAGE'. This allows modpost to do namespace
checking, without having to go through all the effort of parsing ELF and
relocation records just to get to the struct kernel_symbols.
On x86_64 I saw no difference in binary size (compression), but at
runtime this will require a word of memory per export to hold the
namespace. An alternative could be to store namespaced symbols in their
own section and use a separate 'struct namespaced_kernel_symbol' for
that section, at the cost of making the module loader more complex.
Co-developed-by: Martijn Coenen <maco@android.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Similar to modpost's get_next_modinfo(), introduce get_next_modinfo() in
kernel/module.c to acquire any further values associated with the same
modinfo tag name. That is useful for any tags that have multiple
occurrences (such as 'alias'), but is in particular introduced here as
part of the symbol namespaces patch series to read the (potentially)
multiple namespaces a module is importing.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Martijn Coenen <maco@android.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
We should keep the case of "#define debug_align(X) (X)" for all arches
without CONFIG_HAS_STRICT_MODULE_RWX ability, which would save people, who
are sensitive to system size, a lot of memory when using modules,
especially for embedded systems. This is also the intention of the
original #ifdef... statement and still valid for now.
Note that this still keeps the effect of the fix of the following commit,
38f054d549 ("modules: always page-align module section allocations"),
since when CONFIG_ARCH_HAS_STRICT_MODULE_RWX is enabled, module pages are
aligned.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
If the kernel is locked down, require that all modules have valid
signatures that we can verify.
I have adjusted the errors generated:
(1) If there's no signature (ENODATA) or we can't check it (ENOPKG,
ENOKEY), then:
(a) If signatures are enforced then EKEYREJECTED is returned.
(b) If there's no signature or we can't check it, but the kernel is
locked down then EPERM is returned (this is then consistent with
other lockdown cases).
(2) If the signature is unparseable (EBADMSG, EINVAL), the signature fails
the check (EKEYREJECTED) or a system error occurs (eg. ENOMEM), we
return the error we got.
Note that the X.509 code doesn't check for key expiry as the RTC might not
be valid or might not have been transferred to the kernel's clock yet.
[Modified by Matthew Garrett to remove the IMA integration. This will
be replaced with integration with the IMA architecture policy
patchset.]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Matthew Garrett <matthewgarrett@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Jessica Yu <jeyu@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>
IMA will use the module_signature format for append signatures, so export
the relevant definitions and factor out the code which verifies that the
appended signature trailer is valid.
Also, create a CONFIG_MODULE_SIG_FORMAT option so that IMA can select it
and be able to use mod_check_sig() without having to depend on either
CONFIG_MODULE_SIG or CONFIG_MODULES.
s390 duplicated the definition of struct module_signature so now they can
use the new <linux/module_signature.h> header instead.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Acked-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Some arches (e.g., arm64, x86) have moved towards non-executable
module_alloc() allocations for security hardening reasons. That means
that the module loader will need to set the text section of a module to
executable, regardless of whether or not CONFIG_STRICT_MODULE_RWX is set.
When CONFIG_STRICT_MODULE_RWX=y, module section allocations are always
page-aligned to handle memory rwx permissions. On some arches with
CONFIG_STRICT_MODULE_RWX=n however, when setting the module text to
executable, the BUG_ON() in frob_text() gets triggered since module
section allocations are not page-aligned when CONFIG_STRICT_MODULE_RWX=n.
Since the set_memory_* API works with pages, and since we need to call
set_memory_x() regardless of whether CONFIG_STRICT_MODULE_RWX is set, we
might as well page-align all module section allocations for ease of
managing rwx permissions of module sections (text, rodata, etc).
Fixes: 2eef1399a8 ("modules: fix BUG when load module with rodata=n")
Reported-by: Martin Kaiser <lists@kaiser.cx>
Reported-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: David Lechner <david@lechnology.com>
Tested-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Summary of modules changes for the 5.3 merge window:
- Code fixes and cleanups
- Fix bug where set_memory_x() wasn't being called when rodata=n
- Fix bug where -EEXIST was being returned for going modules
- Allow arches to override module_exit_section()
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIcBAABCgAGBQJdMET+AAoJEMBFfjjOO8FyWg4P/RFUwHUxdpouLlVjlJVx40ko
WWFMjQ7zDjhWJVvqataQJS3L3yqhZEC+KrSetqKgP0NxKQ2ev4BwgGF822yorQRw
Aorw/aHk9xIyfv7tUEjQgLpa7j1zv15uLx+Y4mkRSgc1uZve0MYKgMsU4db97pTk
XUyronakoM9h4z7NVyV21F9dgprnytzdWwgYdjEx2aMPzF/+3MAPN6H7d8Cb8v4X
85UwPb8SB5F3U/wzYowrHmlFTlAOkroUrZRErwUOlCn8rvZefkt4NnJwShBC7YPa
N0CVemw6sgy5KcDUczL7oQJ+kyYwtHN0i0EhvTMixPFKeeCI96Y+UNPZxxQANd6f
0djYqvRtfqAp7b2bRSfSiApRdxMO3rl17tY/c1MiIb4/Yk5BtofX+8edW3eMX3Xc
eL5EDL69idgjx1llXmScmjbWiy7Mg61mmo6PN8T/wyIqtDQ/CXqovHdh8Ehbubuf
5cC7fQiVSRhqvg0N4w2FEr+hV+VpEjdnfxypd46ABDVhYYir7ybMLoHYwBimwKSD
70qOJWfiRjnEES0qaO3JH/nlXhQGSnPpfe7kwx0LAIyIdTTfarPjGbK/5wcNcReA
f3A7R2p//G7sNg3DWYSG1cKEjgOAwMjD00SOBov82K9VQ8spwMexIo93Hj6BEbY5
5cex2njf5G2YNKDfAvoi
=/sk3
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Summary of modules changes for the 5.3 merge window:
- Code fixes and cleanups
- Fix bug where set_memory_x() wasn't being called when rodata=n
- Fix bug where -EEXIST was being returned for going modules
- Allow arches to override module_exit_section()"
* tag 'modules-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
modules: fix compile error if don't have strict module rwx
ARM: module: recognize unwind exit sections
module: allow arch overrides for .exit section names
modules: fix BUG when load module with rodata=n
kernel/module: Fix mem leak in module_add_modinfo_attrs
kernel: module: Use struct_size() helper
kernel/module.c: Only return -EEXIST for modules that have finished loading
