Currently ceph_osdc_new_request() assigns an osd request's
r_num_pages and r_alignment fields. The only thing it does
after that is call ceph_osdc_build_request(), and that doesn't
need those fields to be assigned.
Move the assignment of those fields out of ceph_osdc_new_request()
and into its caller. As a result, the page_align parameter is no
longer used, so get rid of it.
Note that in ceph_sync_write(), the value for req->r_num_pages had
already been calculated earlier (as num_pages, and fortunately
it was computed the same way). So don't bother recomputing it,
but because it's not needed earlier, move that calculation after the
call to ceph_osdc_new_request(). Hold off making the assignment to
r_alignment, doing it instead r_pages and r_num_pages are
getting set.
Similarly, in start_read(), nr_pages already holds the number of
pages in the array (and is calculated the same way), so there's no
need to recompute it. Move the assignment of the page alignment
down with the others there as well.
This and the next few patches are preparation work for:
http://tracker.ceph.com/issues/4127
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
(This is being reposted. The first one had a problem because it
erroneously added a similar change elsewhere; that change has been
dropped.)
The next patch in this series points out that the calculation for
the number of pages in an osd request is getting done twice. It
is not obvious, but the result of both calculations is identical.
This patch simplifies one of them--as a separate step--to make
it clear that the transformation in the next patch is valid.
In ceph_sync_write() there is some magic that computes page_align
for an osd request. But a little analysis shows it can be
simplified.
First, we have:
io_align = pos & ~PAGE_MASK;
which is used here:
page_align = (pos - io_align + buf_align) & ~PAGE_MASK;
Note (pos - io_align) simply rounds "pos" down to the nearest multiple
of the page size.
We also have:
buf_align = (unsigned long)data & ~PAGE_MASK;
Adding buf_align to that rounded-down "pos" value will stay within
the same page; the result will just be offset by the page offset for
the "data" pointer. The final mask therefore leaves just the value
of "buf_align".
One more simplification. Note that the result of calc_pages_for()
is invariant of which page the offset starts in--the only thing that
matters is the offset within the starting page. We will have
put the proper page offset to use into "page_align", so just use
that in calculating num_pages.
This resolves:
http://tracker.ceph.com/issues/4166
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There's a spot that computes the number of pages to allocate for a
page-aligned length by just shifting it. Use calc_pages_for()
instead, to be consistent with usage everywhere else. The result
is the same.
The reason for this is to make it clearer in an upcoming patch that
this calculation is duplicated.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Currently, incoming mds messages never use page data, which means
there is no need to set the page_alignment field in the message.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
The only user of the ceph messenger that doesn't define an alloc_msg
method is the mds client. Define one, such that it works just like
it did before, and simplify ceph_con_in_msg_alloc() by assuming the
alloc_msg method is always present.
This and the next patch resolve:
http://tracker.ceph.com/issues/4322
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
In ceph_con_in_msg_alloc(), if no alloc_msg method is defined for a
connection a new message is allocated with ceph_msg_new().
Drop the mutex before making this call, and make sure we're still
connected when we get it back again.
This is preparing for the next patch, which ensures all connections
define an alloc_msg method, and then handles them all the same way.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
The purpose of ceph_calc_object_layout() is to fill in the pool
number and seed for a ceph_pg structure provided, based on a given
osd map and target object id.
Currently that function takes a file layout parameter, but the only
thing used out of that is its pool number.
Change the function so it takes a pool number rather than the full
file layout structure. Only update the ceph_pg if the pool is found
in the osd map. Get rid of few useless lines of code from the
function while there.
Since the function now very clearly just fills in the ceph_pg
structure it's provided, rename it ceph_calc_ceph_pg().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The pagelist_count field is never actually used, so get rid of it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Two of the fields defining osd operations are defined using (char *)
while the data they represent are really untyped, not character
strings. Change them to have type (void *).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The new cases added to osd_req_encode_op() caused a new sparse
error, which highlighted an existing problem that had been
overlooked since it was originally checked in. When an unsupported
opcode is found the destination rather than the source opcode was
being used in the error message. The two differ in their byte
order, and we want to be using the one in the source.
Fix the problem in both spots.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An osd request marked to linger will be re-submitted in the event
a connection to the target osd gets dropped. Currently, if there
is a callback function associated with a request it will be called
each time a request is submitted--which for lingering requests can
be more than once.
Change it so a request--including lingering ones--will get completed
(from the perspective of the user of the osd client) exactly once.
This resolves:
http://tracker.ceph.com/issues/3967
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
make __ceph_do_pending_vmtruncate() acquire the i_mutex if the caller
does not hold the i_mutex, so ceph_aio_read() can call safely.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
ceph_aio_write() has an optimization that marks CEPH_CAP_FILE_WR
cap dirty before data is copied to page cache and inode size is
updated. The optimization avoids slow cap revocation caused by
balance_dirty_pages(), but introduces inode size update race. If
ceph_check_caps() flushes the dirty cap before the inode size is
updated, MDS can miss the new inode size. So just remove the
optimization.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
commit 22cddde104 breaks the atomicity of write operation, it also
introduces a deadlock between write and truncate.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
Conflicts:
fs/ceph/addr.c
commit c6ffe10015 moved the flag that tracks if the dcache contents
for a directory are complete to dentry. The problem is there are
lots of places that use ceph_dir_{set,clear,test}_complete() while
holding i_ceph_lock. but ceph_dir_{set,clear,test}_complete() may
sleep because they call dput().
This patch basically reverts that commit. For ceph_d_prune(), it's
called with both the dentry to prune and the parent dentry are
locked. So it's safe to access the parent dentry's d_inode and
clear I_COMPLETE flag.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
MDS ignores cap update message if migrate_seq mismatch, so when
receiving a cap import message with higher migrate_seq, set mds_want
according to the cap import message.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
The page alignment field for a request is currently set in
ceph_osdc_build_request(). It's not needed at that point
nor do either of its callers need that value assigned at
any point before they call ceph_osdc_start_request().
So move that assignment into ceph_osdc_start_request().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Use distinct fields for tracking the number of pages in a message's
page array and in a message's page list. Currently only one or the
other is used at a time, but that will be changing soon.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The only remaining reason to pass the osd request to calc_layout()
is to fill in its r_num_pages and r_page_alignment fields. Once it
fills those in, it doesn't do anything more with them.
We can therefore move those assignments into the caller, and get rid
of the "req" parameter entirely.
Note, however, that the only caller is ceph_osdc_new_request(),
and that immediately overwrites those fields with values based on
its passed-in page offset. So the assignment inside calc_layout()
was redundant anyway.
This resolves:
http://tracker.ceph.com/issues/4262
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Move the formatting of the object name (oid) to use for an object
request into the caller of calc_layout(). This makes the "vino"
parameter no longer necessary, so get rid of it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Have calc_layout() pass the computed object number back to its
caller. (This is a small step to simplify review.)
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The bio_seg field is used by the ceph messenger in iterating through
a bio. It should never have a negative value, so make it an
unsigned. (I contemplated making it unsigned short to match the
struct bio definition, but it offered no benefit.)
Change variables used to hold bio_seg values to all be unsigned as
well. Change two variable names in init_bio_iter() to match the
convention used everywhere else.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
If an invalid layout is provided to ceph_osdc_new_request(), its
call to calc_layout() might return an error. At that point in the
function we've already allocated an osd request structure, so we
need to free it (drop a reference) in the event such an error
occurs.
The only other value calc_layout() will return is 0, so make that
explicit in the successful case.
This resolves:
http://tracker.ceph.com/issues/4240
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
A late-arriving fix for musb on OMAP4, resolving an issue where the musb
IP won't be clocked and thus not functional. Small in scope, most of the
lines changed is a longish comment.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=pHY5
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fix from Olof Johansson:
"A late-arriving fix for musb on OMAP4, resolving an issue where the
musb IP won't be clocked and thus not functional. Small in scope,
most of the lines changed is a longish comment."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock
I think we could just move the full vm_iomap_memory() function into
util.h or similar, but I didn't get any reply from anybody actually
using nommu even to this trivial patch, so I'm not going to touch it any
more than required.
Here's the fairly minimal stub to make the nommu case at least
potentially work. It doesn't seem like anybody cares, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
this MUSB no longer works on omap4 based devices.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=MBEd
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9-rc6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren:
One MUSB regression fix that I forgot to send earlier. Without
this MUSB no longer works on omap4 based devices.
* tag 'omap-for-v3.9-rc6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull media fixes from Mauro Carvalho Chehab:
"Two driver fixes.
One avoids reading any file at a system with a cx25821 board
(fortunately, this is not a common device). The other one prevents
reading after a buffer with ISDB-T devices based on mb86a20s."
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] cx25821: do not expose broken video output streams
[media] mb86a20s: Fix estimate_rate setting
Pull late parisc fixes from Helge Deller:
"I know it's *very* late in the 3.9 release cycle, but since there
aren't that many people testing the parisc linux kernel, a few (for
our port) critical issues just showed up a few days back for the first
time.
What's in it?
- add missing __ucmpdi2 symbol, which is required for btrfs on 32bit
kernel.
- change kunmap() macro to static inline function. This fixes a
debian/gcc-4.4 build error.
- add locking when doing PTE updates. This fixes random userspace
crashes.
- disable (optional) -mlong-calls compiler option for modules, else
modules can't be loaded at runtime.
- a smart patch by Will Deacon which fixes 64bit put_user() warnings
on 32bit kernel."
* 'fixes-3.9-late' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: use spin_lock_irqsave/spin_unlock_irqrestore for PTE updates
parisc: disable -mlong-calls compiler option for kernel modules
parisc: uaccess: fix compiler warnings caused by __put_user casting
parisc: Change kunmap macro to static inline function
parisc: Provide __ucmpdi2 to resolve undefined references in 32 bit builds.
variable_is_present() accesses '__efivars' directly, but when called via
gsmi_init() Michel reports observing the following crash,
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: variable_is_present+0x55/0x170
Call Trace:
register_efivars+0x106/0x370
gsmi_init+0x2ad/0x3da
do_one_initcall+0x3f/0x170
The reason for the crash is that '__efivars' hasn't been initialised nor
has it been registered with register_efivars() by the time the google
EFI SMI driver runs. The gsmi code uses its own struct efivars, and
therefore, a different variable list. Fix the above crash by passing
the registered struct efivars to variable_is_present(), so that we
traverse the correct list.
Reported-by: Michel Lespinasse <walken@google.com>
Tested-by: Michel Lespinasse <walken@google.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit b0de59b573 ("TTY: do not update atime/mtime on read/write")
we removed timestamps from tty inodes to fix a security issue and waited
if something breaks. Well, 'w', the utility to find out logged users
and their inactivity time broke. It shows that users are inactive since
the time they logged in.
To revert to the old behaviour while still preventing attackers to
guess the password length, we update the timestamps in one-minute
intervals by this patch.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
on some Apple machines because they implement EFI spec 1.10, which
doesn't provide a QueryVariableInfo() runtime function and the logic
used to check for the existence of that function was insufficient.
Fix from Josh Boyer.
* The anti-bricking algorithm also introduced a compiler warning on
32-bit. Fix from Borislav Petkov.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=l/fT
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent' into x86/urgent
* The EFI variable anti-bricking algorithm merged in -rc8 broke booting
on some Apple machines because they implement EFI spec 1.10, which
doesn't provide a QueryVariableInfo() runtime function and the logic
used to check for the existence of that function was insufficient.
Fix from Josh Boyer.
* The anti-bricking algorithm also introduced a compiler warning on
32-bit. Fix from Borislav Petkov.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
User applications running on SMP kernels have long suffered from instability
and random segmentation faults. This patch improves the situation although
there is more work to be done.
One of the problems is the various routines in pgtable.h that update page table
entries use different locking mechanisms, or no lock at all (set_pte_at). This
change modifies the routines to all use the same lock pa_dbit_lock. This lock
is used for dirty bit updates in the interruption code. The patch also purges
the TLB entries associated with the PTE to ensure that inconsistent values are
not used after the page table entry is updated. The UP and SMP code are now
identical.
The change also includes a minor update to the purge_tlb_entries function in
cache.c to improve its efficiency.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
CONFIG_MLONGCALLS was introduced in commit
ec758f9832 to overcome linker issues when linking
huge linux kernels, e.g. with many modules linked in.
But in the kernel module loader there is no support yet for the new relocation
types, which is why modules built with -mlong-calls can't be loaded.
Furthermore, for modules long calls are not really necessary, since we already
use stub sections which resolve long distance calls.
So, let's just disable this compiler option when compiling kernel modules.
Signed-off-by: Helge Deller <deller@gmx.de>
When targetting 32-bit processors, __put_user emits a pair of stw
instructions for the 8-byte case. If the type of __val is a pointer, the
marshalling code casts it to the wider integer type of u64, resulting
in the following compiler warnings:
kernel/signal.c: In function 'copy_siginfo_to_user':
kernel/signal.c:2752:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
kernel/signal.c:2752:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
[...]
This patch fixes the warnings by removing the marshalling code and using
the correct output modifiers in the __put_{user,kernel}_asm64 macros
so that GCC will allocate the right registers without the need to
extract the two words explicitly.
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Change kunmap macro to static inline function to fix build error
compiling drivers/base/dma-buf.c.
Without the change, the following error can occur:
CC drivers/base/dma-buf.o
drivers/base/dma-buf.c: In function 'dma_buf_kunmap':
drivers/base/dma-buf.c:427:46:
error: macro "kunmap" passed 3 arguments, but takes just 1
I believe parisc is the only arch to implement kunmap using a macro.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The Debian experimental linux source package (3.8.5-1) build fails
with the following errors:
...
MODPOST 2016 modules
ERROR: "__ucmpdi2" [fs/btrfs/btrfs.ko] undefined!
ERROR: "__ucmpdi2" [drivers/md/dm-verity.ko] undefined!
The attached patch resolves this problem. It is based on the s390
implementation of ucmpdi2.c.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Pull sparc fix from David Miller:
"Brown paper bag fix for sparc64"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix missing put_cpu_var() in tlb_batch_add_one() when not batching.
Dunn noticed breakage on some older PXA machines due to
moving PXA GPIO initcalls to the module_init initlevel.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=Xxmm
-----END PGP SIGNATURE-----
Merge tag 'gpio-v3.9-lastminute' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull gpi fix from Linus Walleij:
"This is a last minute revert for the GPIO tree, as Mike Dunn noticed
breakage on some older PXA machines due to moving PXA GPIO initcalls
to the module_init initlevel"
* tag 'gpio-v3.9-lastminute' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
Revert "gpio: pxa: set initcall level to module init"
This reverts commit 6c7e660a27.
The commit causes breakage on several older PXA machines.
Reported-by: Mike Dunn <mikedunn@newsguy.com>
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We need to check the runtime sys_table for the EFI version the firmware
specifies instead of just checking for a NULL QueryVariableInfo. Older
implementations of EFI don't have QueryVariableInfo but the runtime is
a smaller structure, so the pointer to it may be pointing off into garbage.
This is apparently the case with several Apple firmwares that support EFI
1.10, and the current check causes them to no longer boot. Fix based on
a suggestion from Matthew Garrett.
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Fix this:
arch/x86/boot/compressed/eboot.c: In function ‘setup_efi_vars’:
arch/x86/boot/compressed/eboot.c:269:2: warning: passing argument 1 of ‘efi_call_phys’ makes pointer from integer without a cast [enabled by default]
In file included from arch/x86/boot/compressed/eboot.c:12:0:
/w/kernel/linux/arch/x86/include/asm/efi.h:8:33: note: expected ‘void *’ but argument is of type ‘long unsigned int’
after cc5a080c5d ("efi: Pass boot services variable info to runtime
code").
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Pull MIPS fix from Ralf Baechle:
"Revert the change of the definition of PAGE_MASK which was prettier
but broke a few relativly rare platforms"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
Revert "MIPS: page.h: Provide more readable definition for PAGE_MASK."
This reverts commit c17a655478.
Manuel Lauss writes:
lmo commit c17a6554 (MIPS: page.h: Provide more readable definition for
PAGE_MASK) apparently breaks ioremap of 36-bit addresses on my Alchemy
systems (PCI and PCMCIA) The reason is that in arch/mips/mm/ioremap.c
line 157 (phys_addr &= PAGE_MASK) bits 32-35 are cut off. Seems the
new PAGE_MASK is explicitly 32bit, or one could make it signed instead
of unsigned long.
