Commit Graph

567 Commits

Author SHA1 Message Date
Vladimir Oltean
ca0b272b48 net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
Currently ocelot_set_rx_mode calls ocelot_mact_learn directly, which has
a very nice ocelot_mact_wait_for_completion at the end. Introduced in
commit 639c1b2625 ("net: mscc: ocelot: Register poll timeout should be
wall time not attempts"), this function uses readx_poll_timeout which
triggers a lot of lockdep warnings and is also dangerous to use from
atomic context, potentially leading to lockups and panics.

Steen Hegelund added a poll timeout of 100 ms for checking the MAC
table, a duration which is clearly absurd to poll in atomic context.
So we need to defer the MAC table access to process context, which we do
via a dynamically allocated workqueue which contains all there is to
know about the MAC table operation it has to do.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20201212191612.222019-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14 19:28:22 -08:00
Jakub Kicinski
46d5e62dd3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
xdp_return_frame_bulk() needs to pass a xdp_buff
to __xdp_return().

strlcpy got converted to strscpy but here it makes no
functional difference, so just keep the right code.

Conflicts:
	net/netfilter/nf_tables_api.c

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-11 22:29:38 -08:00
Vladimir Oltean
edd2410b16 net: mscc: ocelot: fix dropping of unknown IPv4 multicast on Seville
The current assumption is that the felix DSA driver has flooding knobs
per traffic class, while ocelot switchdev has a single flooding knob.
This was correct for felix VSC9959 and ocelot VSC7514, but with the
introduction of seville VSC9953, we see a switch driven by felix.c which
has a single flooding knob.

So it is clear that we must do what should have been done from the
beginning, which is not to overwrite the configuration done by ocelot.c
in felix, but instead to teach the common ocelot library about the
differences in our switches, and set up the flooding PGIDs centrally.

The effect that the bogus iteration through FELIX_NUM_TC has upon
seville is quite dramatic. ANA_FLOODING is located at 0x00b548, and
ANA_FLOODING_IPMC is located at 0x00b54c. So the bogus iteration will
actually overwrite ANA_FLOODING_IPMC when attempting to write
ANA_FLOODING[1]. There is no ANA_FLOODING[1] in sevile, just ANA_FLOODING.

And when ANA_FLOODING_IPMC is overwritten with a bogus value, the effect
is that ANA_FLOODING_IPMC gets the value of 0x0003CF7D:
	MC6_DATA = 61,
	MC6_CTRL = 61,
	MC4_DATA = 60,
	MC4_CTRL = 0.
Because MC4_CTRL is zero, this means that IPv4 multicast control packets
are not flooded, but dropped. An invalid configuration, and this is how
the issue was actually spotted.

Reported-by: Eldar Gasanov <eldargasanov2@gmail.com>
Reported-by: Maxim Kochetkov <fido_max@inbox.ru>
Tested-by: Eldar Gasanov <eldargasanov2@gmail.com>
Fixes: 84705fc165 ("net: dsa: felix: introduce support for Seville VSC9953 switch")
Fixes: 3c7b51bd39 ("net: dsa: felix: allow flooding for all traffic classes")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201204175416.1445937-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05 15:41:34 -08:00
Dmitry Osipenko
3a0b6b5abf memory: tegra: Correct stub of devm_tegra_memory_controller_get()
Correct typo in a stub of devm_tegra_memory_controller_get() to fix a
non-ARM kernel compile-testing.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201111011456.7875-2-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-26 18:50:36 +01:00
Dmitry Osipenko
06f079816d memory: tegra-mc: Add interconnect framework
Add common SoC-agnostic ICC framework which turns Tegra Memory Controller
into a memory interconnection provider. This allows us to use interconnect
API for tuning of memory configurations.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Link: https://lore.kernel.org/r/20201104164923.21238-33-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-26 18:50:35 +01:00
Dmitry Osipenko
6c6bd2075f memory: tegra: Add and use devm_tegra_memory_controller_get()
Multiple Tegra drivers need to retrieve Memory Controller and there is
duplication of the retrieval code among the drivers.

Add new devm_tegra_memory_controller_get() helper to remove the code's
duplication and to fix put_device() which was missed in the duplicated
code. Make EMC drivers to use the new helper.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201104164923.21238-29-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-26 18:50:29 +01:00
Dmitry Osipenko
245157a31e soc/tegra: fuse: Add stub for tegra_sku_info
Drivers that use tegra_sku_info and have COMPILE_TEST are failing to be
build due to the missing stub for tegra_sku_info.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201104164923.21238-4-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-06 19:25:21 +01:00
Sebastian Andrzej Siewior
f84754dbc5 soc/fsl/qbman: Add an argument to signal if NAPI processing is required.
dpaa_eth_napi_schedule() and caam_qi_napi_schedule() schedule NAPI if
invoked from:

 - Hard interrupt context
 - Any context which is not serving soft interrupts

Any context which is not serving soft interrupts includes hard interrupts
so the in_irq() check is redundant. caam_qi_napi_schedule() has a comment
about this:

        /*
         * In case of threaded ISR, for RT kernels in_irq() does not return
         * appropriate value, so use in_serving_softirq to distinguish between
         * softirq and irq contexts.
         */
         if (in_irq() || !in_serving_softirq())

This has nothing to do with RT. Even on a non RT kernel force threaded
interrupts run obviously in thread context and therefore in_irq() returns
false when invoked from the handler.

The extension of the in_irq() check with !in_serving_softirq() was there
when the drivers were added, but in the out of tree FSL BSP the original
condition was in_irq() which got extended due to failures on RT.

The usage of in_xxx() in drivers is phased out and Linus clearly requested
that code which changes behaviour depending on context should either be
separated or the context be conveyed in an argument passed by the caller,
which usually knows the context. Right he is, the above construct is
clearly showing why.

The following callchains have been analyzed to end up in
dpaa_eth_napi_schedule():

qman_p_poll_dqrr()
  __poll_portal_fast()
    fq->cb.dqrr()
       dpaa_eth_napi_schedule()

portal_isr()
  __poll_portal_fast()
    fq->cb.dqrr()
       dpaa_eth_napi_schedule()

Both need to schedule NAPI.
The crypto part has another code path leading up to this:
  kill_fq()
     empty_retired_fq()
       qman_p_poll_dqrr()
         __poll_portal_fast()
            fq->cb.dqrr()
               dpaa_eth_napi_schedule()

kill_fq() is called from task context and ends up scheduling NAPI, but
that's pointless and an unintended side effect of the !in_serving_softirq()
check.

The code path:
  caam_qi_poll() -> qman_p_poll_dqrr()

is invoked from NAPI and I *assume* from crypto's NAPI device and not
from qbman's NAPI device. I *guess* it is okay to skip scheduling NAPI
(because this is what happens now) but could be changed if it is wrong
due to `budget' handling.

Add an argument to __poll_portal_fast() which is true if NAPI needs to be
scheduled. This requires propagating the value to the caller including
`qman_cb_dqrr' typedef which is used by the dpaa and the crypto driver.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Herbert XS <herbert@gondor.apana.org.au>
Cc: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Tested-by: Camelia Groza <camelia.groza@nxp.com>
2020-11-03 17:41:03 -08:00
Vladimir Oltean
2f0402fedf net: mscc: ocelot: deny changing the native VLAN from the prepare phase
Put the preparation phase of switchdev VLAN objects to some good use,
and move the check we already had, for preventing the existence of more
than one egress-untagged VLAN per port, to the preparation phase of the
addition.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-02 17:09:07 -08:00
Vladimir Oltean
e2b2e83e52 net: mscc: ocelot: add a "valid" boolean to struct ocelot_vlan
Currently we are checking in some places whether the port has a native
VLAN on egress or not, by comparing the ocelot_port->vid value with zero.

That works, because VID 0 can never be a native VLAN configured by the
bridge, but now we want to make similar checks for the pvid. That won't
work, because there are cases when we do have the pvid set to 0 (not by
the bridge, by ourselves, but still.. it's confusing). And we can't
encode a negative value into an u16, so add a bool to the structure.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-02 17:09:06 -08:00
Vladimir Oltean
c3e58a750e net: mscc: ocelot: transform the pvid and native vlan values into a structure
This is a mechanical patch only.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-02 17:09:06 -08:00
Vladimir Oltean
e5d1f896fd net: mscc: ocelot: support L2 multicast entries
There is one main difference in mscc_ocelot between IP multicast and L2
multicast. With IP multicast, destination ports are encoded into the
upper bytes of the multicast MAC address. Example: to deliver the
address 01:00:5E:11:22:33 to ports 3, 8, and 9, one would need to
program the address of 00:03:08:11:22:33 into hardware. Whereas for L2
multicast, the MAC table entry points to a Port Group ID (PGID), and
that PGID contains the port mask that the packet will be forwarded to.
As to why it is this way, no clue. My guess is that not all port
combinations can be supported simultaneously with the limited number of
PGIDs, and this was somehow an issue for IP multicast but not for L2
multicast. Anyway.

Prior to this change, the raw L2 multicast code was bogus, due to the
fact that there wasn't really any way to test it using the bridge code.
There were 2 issues:
- A multicast PGID was allocated for each MDB entry, but it wasn't in
  fact programmed to hardware. It was dummy.
- In fact we don't want to reserve a multicast PGID for every single MDB
  entry. That would be odd because we can only have ~60 PGIDs, but
  thousands of MDB entries. So instead, we want to reserve a multicast
  PGID for every single port combination for multicast traffic. And
  since we can have 2 (or more) MDB entries delivered to the same port
  group (and therefore PGID), we need to reference-count the PGIDs.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-30 18:25:56 -07:00
Linus Torvalds
2e368dd2bb ARM: SoC-related driver updates
Various driver updates for platforms. A bulk of this is smaller fixes or
 cleanups, but some of the new material this time around is:
 
  - Support for Nvidia Tegra234 SoC
  - Ring accelerator support for TI AM65x
  - PRUSS driver for TI platforms
  - Renesas support for R-Car V3U SoC
  - Reset support for Cortex-M4 processor on i.MX8MQ
 
 There are also new socinfo entries for a handful of different SoCs
 and platforms.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl+TUboPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3T4YP/R5pjF2C1gt8FrCaG4IfhIY1VHWelfPcB5qB
 RC7Pn4MCRCEY+10YPXA70oS6KBaC+gtZ4bPeInzfLXh1ynFJJb+XtAIxoRhnkEw+
 /R979wNcIls9JqkvnHWFx29Y008W2ZNcXVNKH7O2Gxy+eKzDcTMsoH/zj8xWrV5b
 +eBllTzGU4RArYRJdcwOBQwMO6L2pzADHZ7hGMAY//8fo+qrxg8b9EINsH1UHCa8
 gQdWdVlmv6GeLB6RYLRBCWxpW4jOLDqEAvyDV84QQmYHvzD9tqJExNR0hfGTs4TU
 TZWK7LWSNqF0ujQUbFh9Ikcx6DypU1gvE7LKhCDrf4D7HLRX5v4BjGH+xtVtjsyD
 xzh4WEoa3qCNu1mxQjKG8Y6U7bB9cRI2TPVxbbmI4ZuF0njvybecwwOZUBQl4aD4
 5x+Df3pO/E5ECLOBeTnLgvw20fcjHv4HP8l63B6ADb31FUiZrJXItvayY5qXWe+P
 HSgUykmVA4nd4PnLsSj9seyWqOTIqUZ3U3TsmfxIQh2Otie01okwuHb1J7ErO/u0
 W148SgSwVbnkPxjbBHKGgC2r+Q/AjSDGRBYL0ThIVFUztxTBBwhj3FIvMnyyxTIj
 yFBY14KQ8FcNUs8DrbPCaAx/RDCB02IHdvvIlyTmU3RBq7UhJVIglpLzzo2ed9F2
 5u/aVH3y
 =tfPb
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms. A bulk of this is smaller fixes
  or cleanups, but some of the new material this time around is:

   - Support for Nvidia Tegra234 SoC

   - Ring accelerator support for TI AM65x

   - PRUSS driver for TI platforms

   - Renesas support for R-Car V3U SoC

   - Reset support for Cortex-M4 processor on i.MX8MQ

  There are also new socinfo entries for a handful of different SoCs and
  platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
  drm/mediatek: reduce clear event
  soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
  soc: mediatek: cmdq: add jump function
  soc: mediatek: cmdq: add write_s_mask value function
  soc: mediatek: cmdq: add write_s value function
  soc: mediatek: cmdq: add read_s function
  soc: mediatek: cmdq: add write_s_mask function
  soc: mediatek: cmdq: add write_s function
  soc: mediatek: cmdq: add address shift in jump
  soc: mediatek: mtk-infracfg: Fix kerneldoc
  soc: amlogic: pm-domains: use always-on flag
  reset: sti: reset-syscfg: fix struct description warnings
  reset: imx7: add the cm4 reset for i.MX8MQ
  dt-bindings: reset: imx8mq: add m4 reset
  reset: Fix and extend kerneldoc
  reset: reset-zynqmp: Added support for Versal platform
  dt-bindings: reset: Updated binding for Versal reset driver
  reset: imx7: Support module build
  soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
  soc: fsl: qman: convert to use be32_add_cpu()
  ...
2020-10-24 10:39:22 -07:00
Linus Torvalds
9ff9b0d392 networking changes for the 5.10 merge window
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
 traversal in common container configs and improving TCP back-pressure.
 Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
 
 Expand netlink policy support and improve policy export to user space.
 (Ge)netlink core performs request validation according to declared
 policies. Expand the expressiveness of those policies (min/max length
 and bitmasks). Allow dumping policies for particular commands.
 This is used for feature discovery by user space (instead of kernel
 version parsing or trial and error).
 
 Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
 
 Allow more than 255 IPv4 multicast interfaces.
 
 Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
 packets of TCPv6.
 
 In Multi-patch TCP (MPTCP) support concurrent transmission of data
 on multiple subflows in a load balancing scenario. Enhance advertising
 addresses via the RM_ADDR/ADD_ADDR options.
 
 Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
 
 Allow more calls to same peer in RxRPC.
 
 Support two new Controller Area Network (CAN) protocols -
 CAN-FD and ISO 15765-2:2016.
 
 Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
 kernel problem.
 
 Add TC actions for implementing MPLS L2 VPNs.
 
 Improve nexthop code - e.g. handle various corner cases when nexthop
 objects are removed from groups better, skip unnecessary notifications
 and make it easier to offload nexthops into HW by converting
 to a blocking notifier.
 
 Support adding and consuming TCP header options by BPF programs,
 opening the doors for easy experimental and deployment-specific
 TCP option use.
 
 Reorganize TCP congestion control (CC) initialization to simplify life
 of TCP CC implemented in BPF.
 
 Add support for shipping BPF programs with the kernel and loading them
 early on boot via the User Mode Driver mechanism, hence reusing all the
 user space infra we have.
 
 Support sleepable BPF programs, initially targeting LSM and tracing.
 
 Add bpf_d_path() helper for returning full path for given 'struct path'.
 
 Make bpf_tail_call compatible with bpf-to-bpf calls.
 
 Allow BPF programs to call map_update_elem on sockmaps.
 
 Add BPF Type Format (BTF) support for type and enum discovery, as
 well as support for using BTF within the kernel itself (current use
 is for pretty printing structures).
 
 Support listing and getting information about bpf_links via the bpf
 syscall.
 
 Enhance kernel interfaces around NIC firmware update. Allow specifying
 overwrite mask to control if settings etc. are reset during update;
 report expected max time operation may take to users; support firmware
 activation without machine reboot incl. limits of how much impact
 reset may have (e.g. dropping link or not).
 
 Extend ethtool configuration interface to report IEEE-standard
 counters, to limit the need for per-vendor logic in user space.
 
 Adopt or extend devlink use for debug, monitoring, fw update
 in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
 mv88e6xxx, dpaa2-eth).
 
 In mlxsw expose critical and emergency SFP module temperature alarms.
 Refactor port buffer handling to make the defaults more suitable and
 support setting these values explicitly via the DCBNL interface.
 
 Add XDP support for Intel's igb driver.
 
 Support offloading TC flower classification and filtering rules to
 mscc_ocelot switches.
 
 Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
 fixed interval period pulse generator and one-step timestamping in
 dpaa-eth.
 
 Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
 offload.
 
 Add Lynx PHY/PCS MDIO module, and convert various drivers which have
 this HW to use it. Convert mvpp2 to split PCS.
 
 Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
 7-port Mediatek MT7531 IP.
 
 Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
 and wcn3680 support in wcn36xx.
 
 Improve performance for packets which don't require much offloads
 on recent Mellanox NICs by 20% by making multiple packets share
 a descriptor entry.
 
 Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
 subtree to drivers/net. Move MDIO drivers out of the phy directory.
 
 Clean up a lot of W=1 warnings, reportedly the actively developed
 subsections of networking drivers should now build W=1 warning free.
 
 Make sure drivers don't use in_interrupt() to dynamically adapt their
 code. Convert tasklets to use new tasklet_setup API (sadly this
 conversion is not yet complete).
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl+ItRwACgkQMUZtbf5S
 IrtTMg//UxpdR/MirT1DatBU0K/UGAZY82hV7F/UC8tPgjfHZeHvWlDFxfi3YP81
 PtPKbhRZ7DhwBXefUp6nY3UdvjftrJK2lJm8prJUPSsZRye8Wlcb7y65q7/P2y2U
 Efucyopg6RUrmrM0DUsIGYGJgylQLHnMYUl/keCsD4t5Bp4ksyi9R2t5eitGoWzh
 r3QGdbSa0AuWx4iu0i+tqp6Tj0ekMBMXLVb35dtU1t0joj2KTNEnSgABN3prOa8E
 iWYf2erOau68Ogp3yU3miCy0ZU4p/7qGHTtzbcp677692P/ekak6+zmfHLT9/Pjy
 2Stq2z6GoKuVxdktr91D9pA3jxG4LxSJmr0TImcGnXbvkMP3Ez3g9RrpV5fn8j6F
 mZCH8TKZAoD5aJrAJAMkhZmLYE1pvDa7KolSk8WogXrbCnTEb5Nv8FHTS1Qnk3yl
 wSKXuvutFVNLMEHCnWQLtODbTST9DI/aOi6EctPpuOA/ZyL1v3pl+gfp37S+LUTe
 owMnT/7TdvKaTD0+gIyU53M6rAWTtr5YyRQorX9awIu/4Ha0F0gYD7BJZQUGtegp
 HzKt59NiSrFdbSH7UdyemdBF4LuCgIhS7rgfeoUXMXmuPHq7eHXyHZt5dzPPa/xP
 81P0MAvdpFVwg8ij2yp2sHS7sISIRKq17fd1tIewUabxQbjXqPc=
 =bc1U
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:

 - Add redirect_neigh() BPF packet redirect helper, allowing to limit
   stack traversal in common container configs and improving TCP
   back-pressure.

   Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.

 - Expand netlink policy support and improve policy export to user
   space. (Ge)netlink core performs request validation according to
   declared policies. Expand the expressiveness of those policies
   (min/max length and bitmasks). Allow dumping policies for particular
   commands. This is used for feature discovery by user space (instead
   of kernel version parsing or trial and error).

 - Support IGMPv3/MLDv2 multicast listener discovery protocols in
   bridge.

 - Allow more than 255 IPv4 multicast interfaces.

 - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
   packets of TCPv6.

 - In Multi-patch TCP (MPTCP) support concurrent transmission of data on
   multiple subflows in a load balancing scenario. Enhance advertising
   addresses via the RM_ADDR/ADD_ADDR options.

 - Support SMC-Dv2 version of SMC, which enables multi-subnet
   deployments.

 - Allow more calls to same peer in RxRPC.

 - Support two new Controller Area Network (CAN) protocols - CAN-FD and
   ISO 15765-2:2016.

 - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
   kernel problem.

 - Add TC actions for implementing MPLS L2 VPNs.

 - Improve nexthop code - e.g. handle various corner cases when nexthop
   objects are removed from groups better, skip unnecessary
   notifications and make it easier to offload nexthops into HW by
   converting to a blocking notifier.

 - Support adding and consuming TCP header options by BPF programs,
   opening the doors for easy experimental and deployment-specific TCP
   option use.

 - Reorganize TCP congestion control (CC) initialization to simplify
   life of TCP CC implemented in BPF.

 - Add support for shipping BPF programs with the kernel and loading
   them early on boot via the User Mode Driver mechanism, hence reusing
   all the user space infra we have.

 - Support sleepable BPF programs, initially targeting LSM and tracing.

 - Add bpf_d_path() helper for returning full path for given 'struct
   path'.

 - Make bpf_tail_call compatible with bpf-to-bpf calls.

 - Allow BPF programs to call map_update_elem on sockmaps.

 - Add BPF Type Format (BTF) support for type and enum discovery, as
   well as support for using BTF within the kernel itself (current use
   is for pretty printing structures).

 - Support listing and getting information about bpf_links via the bpf
   syscall.

 - Enhance kernel interfaces around NIC firmware update. Allow
   specifying overwrite mask to control if settings etc. are reset
   during update; report expected max time operation may take to users;
   support firmware activation without machine reboot incl. limits of
   how much impact reset may have (e.g. dropping link or not).

 - Extend ethtool configuration interface to report IEEE-standard
   counters, to limit the need for per-vendor logic in user space.

 - Adopt or extend devlink use for debug, monitoring, fw update in many
   drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
   dpaa2-eth).

 - In mlxsw expose critical and emergency SFP module temperature alarms.
   Refactor port buffer handling to make the defaults more suitable and
   support setting these values explicitly via the DCBNL interface.

 - Add XDP support for Intel's igb driver.

 - Support offloading TC flower classification and filtering rules to
   mscc_ocelot switches.

 - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
   fixed interval period pulse generator and one-step timestamping in
   dpaa-eth.

 - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
   offload.

 - Add Lynx PHY/PCS MDIO module, and convert various drivers which have
   this HW to use it. Convert mvpp2 to split PCS.

 - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
   7-port Mediatek MT7531 IP.

 - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
   and wcn3680 support in wcn36xx.

 - Improve performance for packets which don't require much offloads on
   recent Mellanox NICs by 20% by making multiple packets share a
   descriptor entry.

 - Move chelsio inline crypto drivers (for TLS and IPsec) from the
   crypto subtree to drivers/net. Move MDIO drivers out of the phy
   directory.

 - Clean up a lot of W=1 warnings, reportedly the actively developed
   subsections of networking drivers should now build W=1 warning free.

 - Make sure drivers don't use in_interrupt() to dynamically adapt their
   code. Convert tasklets to use new tasklet_setup API (sadly this
   conversion is not yet complete).

* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
  Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
  net, sockmap: Don't call bpf_prog_put() on NULL pointer
  bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
  bpf, sockmap: Add locking annotations to iterator
  netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
  net: fix pos incrementment in ipv6_route_seq_next
  net/smc: fix invalid return code in smcd_new_buf_create()
  net/smc: fix valid DMBE buffer sizes
  net/smc: fix use-after-free of delayed events
  bpfilter: Fix build error with CONFIG_BPFILTER_UMH
  cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
  net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
  bpf: Fix register equivalence tracking.
  rxrpc: Fix loss of final ack on shutdown
  rxrpc: Fix bundle counting for exclusive connections
  netfilter: restore NF_INET_NUMHOOKS
  ibmveth: Identify ingress large send packets.
  ibmveth: Switch order of ibmveth_helper calls.
  cxgb4: handle 4-tuple PEDIT to NAT mode translation
  selftests: Add VRF route leaking tests
  ...
2020-10-15 18:42:13 -07:00
Linus Torvalds
c6dbef7307 USB/PHY/Thunderbolt driver patches for 5.10-rc1
Here is the big set of USB, PHY, and Thunderbolt driver updates for
 5.10-rc1.
 
 Lots of tiny different things for these subsystems are in here,
 including:
 	- phy driver updates
 	- thunderbolt / USB 4 updates and additions
 	- USB gadget driver updates
 	- xhci fixes and updates
 	- typec driver additions and updates
 	- api conversions to various drivers for core kernel api changes
 	- new USB control message functions to make it harder to get
 	  wrong, as found by syzbot (took 2 tries to get it right)
 	- lots of tiny USB driver fixes and updates all over the place
 
 All of these have been in linux-next for a while, with the exception of
 the last "obviously correct" patch that updated a FALLTHROUGH comment
 that got merged last weekend.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4hAAg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykfRACcCp48StLg4V7XcZ41eQYES/DVwxkAnjnZs+La
 Y7F+o2p8DiuLLQamdEyB
 =lHr1
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY/Thunderbolt driver updates from Greg KH:
 "Here is the big set of USB, PHY, and Thunderbolt driver updates for
  5.10-rc1.

  Lots of tiny different things for these subsystems are in here,
  including:

   - phy driver updates

   - thunderbolt / USB 4 updates and additions

   - USB gadget driver updates

   - xhci fixes and updates

   - typec driver additions and updates

   - api conversions to various drivers for core kernel api changes

   - new USB control message functions to make it harder to get wrong,
     as found by syzbot (took 2 tries to get it right)

   - lots of tiny USB driver fixes and updates all over the place

  All of these have been in linux-next for a while, with the exception
  of the last "obviously correct" patch that updated a FALLTHROUGH
  comment that got merged last weekend"

* tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (374 commits)
  usb: musb: gadget: Use fallthrough pseudo-keyword
  usb: typec: Add QCOM PMIC typec detection driver
  USB: serial: option: add Cellient MPL200 card
  usb: typec: tcpci_maxim: Add support for Sink FRS
  usb: typec: tcpci: Implement callbacks for FRS
  usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)
  usb: typec: tcpci_maxim: Chip level TCPC driver
  usb: typec: tcpci: Add set_vbus tcpci callback
  usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference
  usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabled
  usb: cdc-acm: add quirk to blacklist ETAS ES58X devices
  USB: serial: ftdi_sio: use cur_altsetting for consistency
  USB: serial: option: Add Telit FT980-KS composition
  USB: core: remove polling for /sys/kernel/debug/usb/devices
  usb: typec: add support for STUSB160x Type-C controller family
  usb: typec: add typec_find_pwr_opmode
  usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode
  dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus
  dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema
  usb: dwc2: Fix INTR OUT transfers in DDMA mode.
  ...
2020-10-15 09:51:18 -07:00
David S. Miller
8b0308fe31 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Rejecting non-native endian BTF overlapped with the addition
of support for it.

The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05 18:40:01 -07:00
Vladimir Oltean
2e554a7a5d net: dsa: propagate switchdev vlan_filtering prepare phase to drivers
A driver may refuse to enable VLAN filtering for any reason beyond what
the DSA framework cares about, such as:
- having tc-flower rules that rely on the switch being VLAN-aware
- the particular switch does not support VLAN, even if the driver does
  (the DSA framework just checks for the presence of the .port_vlan_add
  and .port_vlan_del pointers)
- simply not supporting this configuration to be toggled at runtime

Currently, when a driver rejects a configuration it cannot support, it
does this from the commit phase, which triggers various warnings in
switchdev.

So propagate the prepare phase to drivers, to give them the ability to
refuse invalid configurations cleanly and avoid the warnings.

Since we need to modify all function prototypes and check for the
prepare phase from within the drivers, take that opportunity and move
the existing driver restrictions within the prepare phase where that is
possible and easy.

Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Woojung Huh <woojung.huh@microchip.com>
Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Landen Chao <Landen.Chao@mediatek.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Jonathan McDowell <noodles@earth.li>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05 05:56:48 -07:00
Greg Kroah-Hartman
168ae5a74b Merge 5.9-rc8 into usb-next
We need the USB fixes in here as well for testing.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05 08:54:36 +02:00
Olof Johansson
c78c6e18ab NXP/FSL SoC driver updates for v5.10
Fix various compile warnings and static analysis warnings for:
 - QBMan driver
 - DPIO driver
 - QE driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEhb3UXAyxp6UQ0v6khtxQDvusFVQFAl9rzkAACgkQhtxQDvus
 FVTScw//aSBoWqDqADbph5fR/aEIrycXW38sVqXFuMgnMiSV33rBHVw5LKsTjO10
 olL+sGf+yqPx6lRVHEAVlhcHCsR9szBj7B1aUd9XdT7Dbec8guerNrlfIsoi5t8X
 7i3AKzp5B1WqVa5mXqUhbXx0077MuRnZG4xDAPgRIA7NFCIQma/cJ1QUScZVKRNV
 7vJf9mvkw3xw6aLzIo1zmAJgcEcRFudZFoRfWqW+f4t5SVYepmdBMXOrLeLEf4Lt
 Kv1+RucY8pHrnDM+MdxWObLKJpudPZTNeWJogyDPPnBEaEr/IkjvedjhT06jIumx
 sFLfyP5zlULiYMY+dKw43MDz7sxGxvi4ZDybRW5iU0mVwjFaMVLdN2QyzhJoWppt
 PjcIvn9mmhMC4Hk5e4WzDuHPwFkKRktRtqvTyx3pXPWuZmmsBNNqM96DeOrxt6yN
 IO8sWoH/WKDkP5rU+nGmie0KgGaIp5oDN7ZYjGqUHlQ/6g4xJhd28MwtiUSo8tqW
 2RkgAjuzKlB335AxsWFD3zW4+Qup3yie3Nzl2ysndkXTQZQizjD4yVQCwJUd6udt
 1REPrdKYDs9dokfTNUP7rLUwgE4xgNFgpLCnYuek6IhyBrtUgnh9kPmg2BcGYS9h
 d2BGiGHotxO9i4YqmlDkz4XIweI6h1s8hIHWNj+lV1orLQAiwIk=
 =4+F2
 -----END PGP SIGNATURE-----

Merge tag 'soc-fsl-next-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers

NXP/FSL SoC driver updates for v5.10

Fix various compile warnings and static analysis warnings for:
- QBMan driver
- DPIO driver
- QE driver

* tag 'soc-fsl-next-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
  soc: fsl: qman: convert to use be32_add_cpu()
  soc: fsl: dpio: remove set but not used 'addr_cena'
  soc: fsl: qbman: Fix return value on success
  soc: fsl: qman: fix -Wpacked-not-aligned warnings

Link: https://lore.kernel.org/r/20200923224416.25788-1-leoyang.li@nxp.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2020-10-03 12:59:14 -07:00
Vladimir Oltean
1397a2eb52 net: mscc: ocelot: create TCAM skeleton from tc filter chains
For Ocelot switches, there are 2 ingress pipelines for flow offload
rules: VCAP IS1 (Ingress Classification) and IS2 (Security Enforcement).
IS1 and IS2 support different sets of actions. The pipeline order for a
packet on ingress is:

Basic classification -> VCAP IS1 -> VCAP IS2

Furthermore, IS1 is looked up 3 times, and IS2 is looked up twice (each
TCAM entry can be configured to match only on the first lookup, or only
on the second, or on both etc).

Because the TCAMs are completely independent in hardware, and because of
the fixed pipeline, we actually have very limited options when it comes
to offloading complex rules to them while still maintaining the same
semantics with the software data path.

This patch maps flow offload rules to ingress TCAMs according to a
predefined chain index number. There is going to be a script in
selftests that clarifies the usage model.

There is also an egress TCAM (VCAP ES0, the Egress Rewriter), which is
modeled on top of the default chain 0 of the egress qdisc, because it
doesn't have multiple lookups.

Suggested-by: Allan W. Nielsen <allan.nielsen@microchip.com>
Co-developed-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02 15:40:30 -07:00
Vladimir Oltean
319e4dd11a net: mscc: ocelot: introduce conversion helpers between port and netdev
Since the mscc_ocelot_switch_lib is common between a pure switchdev and
a DSA driver, the procedure of retrieving a net_device for a certain
port index differs, as those are registered by their individual
front-ends.

Up to now that has been dealt with by always passing the port index to
the switch library, but now, we're going to need to work with net_device
pointers from the tc-flower offload, for things like indev, or mirred.
It is not desirable to refactor that, so let's make sure that the flower
offload core has the ability to translate between a net_device and a
port index properly.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02 15:40:30 -07:00
Vladimir Oltean
2096805497 net: mscc: ocelot: automatically detect VCAP constants
The numbers in struct vcap_props are not intuitive to derive, because
they are not a straightforward copy-and-paste from the reference manual
but instead rely on a fairly detailed level of understanding of the
layout of an entry in the TCAM and in the action RAM. For this reason,
bugs are very easy to introduce here.

Ease the work of hardware porters and read from hardware the constants
that were exported for this particular purpose. Note that this implies
that struct vcap_props can no longer be const.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-29 18:26:24 -07:00
Vladimir Oltean
e3aea296d8 net: mscc: ocelot: add definitions for VCAP ES0 keys, actions and target
As a preparation step for the offloading to ES0, let's create the
infrastructure for talking with this hardware block.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-29 18:26:12 -07:00
Vladimir Oltean
a61e365d7c net: mscc: ocelot: add definitions for VCAP IS1 keys, actions and target
As a preparation step for the offloading to IS1, let's create the
infrastructure for talking with this hardware block.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-29 18:26:12 -07:00
Vladimir Oltean
c1c3993edb net: mscc: ocelot: generalize existing code for VCAP
In the Ocelot switches there are 3 TCAMs: VCAP ES0, IS1 and IS2, which
have the same configuration interface, but different sets of keys and
actions. The driver currently only supports VCAP IS2.

In preparation of VCAP IS1 and ES0 support, the existing code must be
generalized to work with any VCAP.

In that direction, we should move the structures that depend upon VCAP
instantiation, like vcap_is2_keys and vcap_is2_actions, out of struct
ocelot and into struct vcap_props .keys and .actions, a structure that
is replicated 3 times, once per VCAP. We'll pass that structure as an
argument to each function that does the key and action packing - only
the control logic needs to distinguish between ocelot->vcap[VCAP_IS2]
or IS1 or ES0.

Another change is to make use of the newly introduced ocelot_target_read
and ocelot_target_write API, since the 3 VCAPs have the same registers
but put at different addresses.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-29 18:26:12 -07:00
Vladimir Oltean
3c0e37a9e4 net: mscc: ocelot: introduce a new ocelot_target_{read,write} API
There are some targets (register blocks) in the Ocelot switch that are
instantiated more than once. For example, the VCAP IS1, IS2 and ES0
blocks all share the same register layout for interacting with the cache
for the TCAM and the action RAM.

For the VCAPs, the procedure for servicing them is actually common. We
just need an API specifying which VCAP we are talking to, and we do that
via these raw ocelot_target_read and ocelot_target_write accessors.

In plain ocelot_read, the target is encoded into the register enum
itself:

	u16 target = reg >> TARGET_OFFSET;

For the VCAPs, the registers are currently defined like this:

	enum ocelot_reg {
	[...]
		S2_CORE_UPDATE_CTRL = S2 << TARGET_OFFSET,
		S2_CORE_MV_CFG,
		S2_CACHE_ENTRY_DAT,
		S2_CACHE_MASK_DAT,
		S2_CACHE_ACTION_DAT,
		S2_CACHE_CNT_DAT,
		S2_CACHE_TG_DAT,
	[...]
	};

which is precisely what we want to avoid, because we'd have to duplicate
the same register map for S1 and for S0, and then figure out how to pass
VCAP instance-specific registers to the ocelot_read calls (basically
another lookup table that undoes the effect of shifting with
TARGET_OFFSET).

So for some targets, propose a more raw API, similar to what is
currently done with ocelot_port_readl and ocelot_port_writel. Those
targets can only be accessed with ocelot_target_{read,write} and not
with ocelot_{read,write} after the conversion, which is fine.

The VCAP registers are not actually modified to use this new API as of
this patch. They will be modified in the next one.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-29 18:26:12 -07:00
Vladimir Oltean
5124197ce5 net: dsa: tag_ocelot: use a short prefix on both ingress and egress
There are 2 goals that we follow:

- Reduce the header size
- Make the header size equal between RX and TX

The issue that required long prefix on RX was the fact that the ocelot
DSA tag, being put before Ethernet as it is, would overlap with the area
that a DSA master uses for RX filtering (destination MAC address
mainly).

Now that we can ask DSA to put the master in promiscuous mode, in theory
we could remove the prefix altogether and call it a day, but it looks
like we can't. Using no prefix on ingress, some packets (such as ICMP)
would be received, while others (such as PTP) would not be received.
This is because the DSA master we use (enetc) triggers parse errors
("MAC rx frame errors") presumably because it sees Ethernet frames with
a bad length. And indeed, when using no prefix, the EtherType (bytes
12-13 of the frame, bits 96-111) falls over the REW_VAL field from the
extraction header, aka the PTP timestamp.

When turning the short (32-bit) prefix on, the EtherType overlaps with
bits 64-79 of the extraction header, which are a reserved area
transmitted as zero by the switch. The packets are not dropped by the
DSA master with a short prefix. Actually, the frames look like this in
tcpdump (below is a PTP frame, with an extra dsa_8021q tag - dadb 0482 -
added by a downstream sja1105).

89:0c:a9:f2:01:00 > 88:80:00:0a:00:1d, 802.3, length 0: LLC, \
	dsap Unknown (0x10) Individual, ssap ProWay NM (0x0e) Response, \
	ctrl 0x0004: Information, send seq 2, rcv seq 0, \
	Flags [Response], length 78

0x0000:  8880 000a 001d 890c a9f2 0100 0000 100f  ................
0x0010:  0400 0000 0180 c200 000e 001f 7b63 0248  ............{c.H
0x0020:  dadb 0482 88f7 1202 0036 0000 0000 0000  .........6......
0x0030:  0000 0000 0000 0000 0000 001f 7bff fe63  ............{..c
0x0040:  0248 0001 1f81 0500 0000 0000 0000 0000  .H..............
0x0050:  0000 0000 0000 0000 0000 0000            ............

So the short prefix is our new default: we've shortened our RX frames by
12 octets, increased TX by 4, and headers are now equal between RX and
TX. Note that we still need promiscuous mode for the DSA master to not
drop it.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26 14:17:58 -07:00
Vladimir Oltean
2d44b097bb net: mscc: ocelot: move NPI port configuration to DSA
Remove the ocelot_configure_cpu() function, which was in fact bringing
up 2 ports: the CPU port module, which both switchdev and DSA have, and
the NPI port, which only DSA has.

The (non-Ethernet) CPU port module is at a fixed index in the analyzer,
whereas the NPI port is selected through the "ethernet" property in the
device tree.

Therefore, the function to set up an NPI port is DSA-specific, so we
move it there, simplifying the ocelot switch library a little bit.

Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: UNGLinuxDriver <UNGLinuxDriver@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26 14:17:58 -07:00
Xiaoliang Yang
4ab810a4e0 net: mscc: ocelot: fix fields offset in SG_CONFIG_REG_3
INIT_IPS and GATE_ENABLE fields have a wrong offset in SG_CONFIG_REG_3.
This register is used by stream gate control of PSFP, and it has not
been used before, because PSFP is not implemented in ocelot driver.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-24 20:00:40 -07:00
Vladimir Oltean
e2f9a8fe73 net: mscc: ocelot: always pass skb clone to ocelot_port_add_txtstamp_skb
Currently, ocelot switchdev passes the skb directly to the function that
enqueues it to the list of skb's awaiting a TX timestamp. Whereas the
felix DSA driver first clones the skb, then passes the clone to this
queue.

This matters because in the case of felix, the common IRQ handler, which
is ocelot_get_txtstamp(), currently clones the clone, and frees the
original clone. This is useless and can be simplified by using
skb_complete_tx_timestamp() instead of skb_tstamp_tx().

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-24 19:47:56 -07:00
David S. Miller
3ab0a7a0c3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Two minor conflicts:

1) net/ipv4/route.c, adding a new local variable while
   moving another local variable and removing it's
   initial assignment.

2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
   One pretty prints the port mode differently, whilst another
   changes the driver to try and obtain the port mode from
   the port node rather than the switch node.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-22 16:45:34 -07:00
Li Yang
1fe44191f3 soc: fsl: qman: fix -Wpacked-not-aligned warnings
This fixes compile warnings from the -Wpacked-not-aligned option.

In file included from ../drivers/crypto/caam/qi.c:12:
../include/soc/fsl/qman.h:259:1: warning: alignment 1 of ‘struct qm_dqrr_entry’ is less than 8 [-Wpacked-not-aligned]
 } __packed;
 ^
../include/soc/fsl/qman.h:292:2: warning: alignment 1 of ‘struct <anonymous>’ is less than 8 [-Wpacked-not-aligned]
  } __packed ern;
  ^

Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-09-22 17:38:21 -05:00
Linus Torvalds
d3017135c4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:

 - fix failure to add bond interfaces to a bridge, the offload-handling
   code was too defensive there and recent refactoring unearthed that.
   Users complained (Ido)

 - fix unnecessarily reflecting ECN bits within TOS values / QoS marking
   in TCP ACK and reset packets (Wei)

 - fix a deadlock with bpf iterator. Hopefully we're in the clear on
   this front now... (Yonghong)

 - BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel)

 - fix AQL on mt76 devices with FW rate control and add a couple of AQL
   issues in mac80211 code (Felix)

 - fix authentication issue with mwifiex (Maximilian)

 - WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro)

 - fix exception handling for multipath routes via same device (David
   Ahern)

 - revert back to a BH spin lock flavor for nsid_lock: there are paths
   which do require the BH context protection (Taehee)

 - fix interrupt / queue / NAPI handling in the lantiq driver (Hauke)

 - fix ife module load deadlock (Cong)

 - make an adjustment to netlink reply message type for code added in
   this release (the sole change touching uAPI here) (Michal)

 - a number of fixes for small NXP and Microchip switches (Vladimir)

[ Pull request acked by David: "you can expect more of this in the
  future as I try to delegate more things to Jakub" ]

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits)
  net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
  net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
  net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
  inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute
  net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU
  net: Update MAINTAINERS for MediaTek switch driver
  net/mlx5e: mlx5e_fec_in_caps() returns a boolean
  net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock
  net/mlx5e: kTLS, Fix leak on resync error flow
  net/mlx5e: kTLS, Add missing dma_unmap in RX resync
  net/mlx5e: kTLS, Fix napi sync and possible use-after-free
  net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported
  net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats()
  net/mlx5e: Fix multicast counter not up-to-date in "ip -s"
  net/mlx5e: Fix endianness when calculating pedit mask first bit
  net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported
  net/mlx5e: CT: Fix freeing ct_label mapping
  net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready
  net/mlx5e: Use synchronize_rcu to sync with NAPI
  net/mlx5e: Use RCU to protect rq->xdp_prog
  ...
2020-09-22 14:43:50 -07:00
Vladimir Oltean
881321b6ed net: mscc: ocelot: make ocelot_init_timestamp take a const struct ptp_clock_info
It is a good measure to ensure correctness if the structures that are
meant to remain constant are only processed by functions that thake
constant arguments.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18 17:52:40 -07:00
Vladimir Oltean
e5fb512d81 net: mscc: ocelot: deinitialize only initialized ports
Currently mscc_ocelot_init_ports() will skip initializing a port when it
doesn't have a phy-handle, so the ocelot->ports[port] pointer will be
NULL. Take this into consideration when tearing down the driver, and add
a new function ocelot_deinit_port() to the switch library, mirror of
ocelot_init_port(), which needs to be called by the driver for all ports
it has initialized.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18 13:52:34 -07:00
Vladimir Oltean
6565243c06 net: mscc: ocelot: add locking for the port TX timestamp ID
The ocelot_port->ts_id is used to:
(a) populate skb->cb[0] for matching the TX timestamp in the PTP IRQ
    with an skb.
(b) populate the REW_OP from the injection header of the ongoing skb.
Only then is ocelot_port->ts_id incremented.

This is a problem because, at least theoretically, another timestampable
skb might use the same ocelot_port->ts_id before that is incremented.
Normally all transmit calls are serialized by the netdev transmit
spinlock, but in this case, ocelot_port_add_txtstamp_skb() is also
called by DSA, which has started declaring the NETIF_F_LLTX feature
since commit 2b86cb8299 ("net: dsa: declare lockless TX feature for
slave ports").  So the logic of using and incrementing the timestamp id
should be atomic per port.

The solution is to use the global ocelot_port->ts_id only while
protected by the associated ocelot_port->ts_id_lock. That's where we
populate skb->cb[0]. Note that for ocelot, ocelot_port_add_txtstamp_skb
is called for the actual skb, but for felix, it is called for the skb's
clone. That is something which will also be changed in the future.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18 13:52:33 -07:00
Thierry Reding
1f44febf71 soc/tegra: fuse: Add Tegra234 support
Add support for FUSE block found on the Tegra234 SoC, which is largely
similar to the IP found on previous generations.

Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-09-18 15:55:29 +02:00
Thierry Reding
52e6d399a4 soc/tegra: fuse: Implement tegra_is_silicon()
This function can be used by drivers to determine whether code is
running on silicon or on a simulation platform.

Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-09-18 15:55:26 +02:00
Thierry Reding
775edf7856 soc/tegra: fuse: Extract tegra_get_platform()
This function extracts the PRE_SI_PLATFORM field from the HIDREV
register and can be used to determine which platform the kernel runs on
(silicon, simulation, ...). Note that while only Tegra194 and later
define this field, it should be safe to call this on prior generations
as well since this field should read as 0, indicating silicon.

Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-09-18 15:55:22 +02:00
Greg Kroah-Hartman
fccee0bace Merge 5.9-rc5 into usb-next
We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-14 10:10:55 +02:00
Vineet Gupta
89d29997f1 irqchip/eznps: Fix build error for !ARC700 builds
eznps driver is supposed to be platform independent however it ends up
including stuff from inside arch/arc headers leading to rand config
build errors.

The quick hack to fix this (proper fix is too much chrun for non active
user-base) is to add following to nps platform agnostic header.
 - copy AUX_IENABLE from arch/arc header
 - move CTOP_AUX_IACK from arch/arc/plat-eznps/*/**

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/20200824095831.5lpkmkafelnvlpi2@linutronix.de
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-08-27 13:15:17 -07:00
Nicolas Saenz Julienne
6b26057aab Revert "firmware: raspberrypi: Introduce vl805 init routine"
This reverts commit fbbc5ff3f7.

The vl805 init routine has moved into drivers/reset/reset-raspberrypi.c

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629161845.6021-9-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-18 13:01:11 +02:00
Alexander A. Klimov
7f317d3490 include/: replace HTTP links with HTTPS ones
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/20200726110117.16346-1-grandmaster@al2klimov.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:57:59 -07:00
Linus Torvalds
30185b69a2 It looks like a smaller batch of clk updates this time around. In the core
framework we just have some minor tweaks and a debugfs feature, so not much to
 see there. The driver updates are fairly well split between AT91 and Qualcomm
 clk support. Adding those two drivers together equals about 50% of the
 diffstat. Otherwise, the big amount of work this time was on supporting
 Broadcom's Raspberry Pi firmware clks. See below for some more highlights.
 
 Core:
  - Document clk_hw_round_rate() so it gets some more use
  - Remove unused __clk_get_flags()
  - Add a prepare/enable debugfs feature similar to rate setting
 
 New Drivers:
  - Add support for SAMA7G5 SoC clks
  - Enable CPU clks on Qualcomm IPQ6018 SoCs
  - Enable CPU clks on Qualcomm MSM8996 SoCs
  - GPU clk support for Qualcomm SM8150 and SM8250 SoCs
  - Audio clks on Qualcomm SC7180 SoCs
  - Microchip Sparx5 DPLL clk
  - Add support for the new Renesas RZ/G2H (R8A774E1) SoC
 
 Updates:
  - Make defines for bcm63xx-gate clks to use in DT
  - Support BCM2711 SoC firmware clks
  - Add HDMI clks for BCM2711 SoCs
  - Add RTC related clks on Ingenic SoCs
  - Support USB PHY clks on Ingenic SoCs
  - Support gate clks on BCM6318 SoCs
  - RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs
  - Use poll_timeout functions in Rockchip clk driver
  - Support Rockchip rk3288w SoC variant
  - Mark mac_lbtest critical on Rockchip rk3188
  - Add CAAM clock support for i.MX vf610 driver
  - Add MU root clock support for i.MX imx8mp driver
  - Amlogic g12: add neural network accelerator clock sources
  - Amlogic meson8: remove critical flag for main PLL divider
  - Amlogic meson8: add video decoder clock gates
  - Convert one more Renesas DT binding to json-schema
  - Enhance critical clock handling on Renesas platforms to only consider
    clocks that were enabled at boot time
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl8tspERHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSX0og//TXp134IBXVZ2Z5Wca4J41itv7tPGJFsX
 EslQ/eMm6xhGEqqrA6BVsQ228JF9rUmg1fbvdl82UPK7Zyp9P2fo6CMC65ngDTky
 B1rLZOaKitER9JdL9DmmnIR772pI//rAMdIeVC/Jn5RR7OpP4lgY6+qvK0pJjVFl
 8aK3uHY+UWVFtqZxuJEAAyZBq1+bREqmVwNC1my6kmMIf0j0KwcGhrZgASWWtjQK
 4TRmroehLC4FBqnJ78Y3E6UAOBlz6C7XnP38qJge2672Ef7QhXZU7AGrGiTtxc4h
 5fB6MNMF+5QGel54qR1eH+JxaEoKsAjLaX1VBr7hAHrGIQ26dBFHFPsPvWDA+VVR
 4bwXJKz2objAWyqlMVM/cVV3q6uDixuScdrw2aAiojmV7ZvdZXflacdmZuS5v7e4
 sh86llN+lF0YrViYz33z+up0risCAi089xVo7Z99VgyLe2DR8TE+4/d6DQTFRNxl
 m66m6mlB9pPPgIV028SAf/zmzyoVWEarwdEAQPjJC6KVRbnR9mFlhSiTQMmCsSvU
 zHRxVcInc+8qIJY6VJ552UFu/JAan/AFl5knb+kW21a7hM8p81H9HuSnS4aHDDq4
 yETPU3XSMYz8ARHX4lKo1UIB6+k9iF2CWdCP+gXHNP+QYSAsRBIJsonjul9lLUCi
 8i6mUGkS0OU=
 =QLRg
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "It looks like a smaller batch of clk updates this time around.

  In the core framework we just have some minor tweaks and a debugfs
  feature, so not much to see there. The driver updates are fairly well
  split between AT91 and Qualcomm clk support. Adding those two drivers
  together equals about 50% of the diffstat.

  Otherwise, the big amount of work this time was on supporting
  Broadcom's Raspberry Pi firmware clks.

  Highlights:

  Core:
   - Document clk_hw_round_rate() so it gets some more use
   - Remove unused __clk_get_flags()
   - Add a prepare/enable debugfs feature similar to rate setting

  New Drivers:
   - Add support for SAMA7G5 SoC clks
   - Enable CPU clks on Qualcomm IPQ6018 SoCs
   - Enable CPU clks on Qualcomm MSM8996 SoCs
   - GPU clk support for Qualcomm SM8150 and SM8250 SoCs
   - Audio clks on Qualcomm SC7180 SoCs
   - Microchip Sparx5 DPLL clk
   - Add support for the new Renesas RZ/G2H (R8A774E1) SoC

  Updates:
   - Make defines for bcm63xx-gate clks to use in DT
   - Support BCM2711 SoC firmware clks
   - Add HDMI clks for BCM2711 SoCs
   - Add RTC related clks on Ingenic SoCs
   - Support USB PHY clks on Ingenic SoCs
   - Support gate clks on BCM6318 SoCs
   - RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs
   - Use poll_timeout functions in Rockchip clk driver
   - Support Rockchip rk3288w SoC variant
   - Mark mac_lbtest critical on Rockchip rk3188
   - Add CAAM clock support for i.MX vf610 driver
   - Add MU root clock support for i.MX imx8mp driver
   - Amlogic g12: add neural network accelerator clock sources
   - Amlogic meson8: remove critical flag for main PLL divider
   - Amlogic meson8: add video decoder clock gates
   - Convert one more Renesas DT binding to json-schema
   - Enhance critical clock handling on Renesas platforms to only
     consider clocks that were enabled at boot time"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (79 commits)
  clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845
  ipq806x: gcc: add support for child probe
  clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static
  clk: qcom: ipq8074: Add correct index for PCIe clocks
  clk: <linux/clk-provider.h>: drop a duplicated word
  clk: renesas: cpg-mssr: Add r8a774e1 support
  dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1
  clk: Drop duplicate selection in Kconfig
  clk: qcom: smd: Add support for MSM8992/4 rpm clocks
  clk: qcom: ipq8074: Add missing clocks for pcie
  dt-bindings: clock: qcom: ipq8074: Add missing bindings for PCIe
  Replace HTTP links with HTTPS ones: Common CLK framework
  clk: qcom: Add CPU clock driver for msm8996
  dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996
  soc: qcom: Separate kryo l2 accessors from PMU driver
  clk: meson: meson8b: add the vclk2_en gate clock
  clk: meson: meson8b: add the vclk_en gate clock
  clk: qcom: Fix return value check in apss_ipq6018_probe()
  clk: bcm: dvp: Add missing module informations
  clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2
  ...
2020-08-07 13:35:51 -07:00
Linus Torvalds
47ec5303d7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:

 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

 2) Support UDP segmentation in code TSO code, from Eric Dumazet.

 3) Allow flashing different flash images in cxgb4 driver, from Vishal
    Kulkarni.

 4) Add drop frames counter and flow status to tc flower offloading,
    from Po Liu.

 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.

 6) Various new indirect call avoidance, from Eric Dumazet and Brian
    Vazquez.

 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
    Yonghong Song.

 8) Support querying and setting hardware address of a port function via
    devlink, use this in mlx5, from Parav Pandit.

 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.

10) Switch qca8k driver over to phylink, from Jonathan McDowell.

11) In bpftool, show list of processes holding BPF FD references to
    maps, programs, links, and btf objects. From Andrii Nakryiko.

12) Several conversions over to generic power management, from Vaibhav
    Gupta.

13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
    Yakunin.

14) Various https url conversions, from Alexander A. Klimov.

15) Timestamping and PHC support for mscc PHY driver, from Antoine
    Tenart.

16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.

17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.

18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.

19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
    drivers. From Luc Van Oostenryck.

20) XDP support for xen-netfront, from Denis Kirjanov.

21) Support receive buffer autotuning in MPTCP, from Florian Westphal.

22) Support EF100 chip in sfc driver, from Edward Cree.

23) Add XDP support to mvpp2 driver, from Matteo Croce.

24) Support MPTCP in sock_diag, from Paolo Abeni.

25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
    infrastructure, from Jakub Kicinski.

26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.

27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.

28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.

29) Refactor a lot of networking socket option handling code in order to
    avoid set_fs() calls, from Christoph Hellwig.

30) Add rfc4884 support to icmp code, from Willem de Bruijn.

31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.

32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.

33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.

34) Support TCP syncookies in MPTCP, from Flowian Westphal.

35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
    Brivio.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
  net: thunderx: initialize VF's mailbox mutex before first usage
  usb: hso: remove bogus check for EINPROGRESS
  usb: hso: no complaint about kmalloc failure
  hso: fix bailout in error case of probe
  ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
  selftests/net: relax cpu affinity requirement in msg_zerocopy test
  mptcp: be careful on subflow creation
  selftests: rtnetlink: make kci_test_encap() return sub-test result
  selftests: rtnetlink: correct the final return value for the test
  net: dsa: sja1105: use detected device id instead of DT one on mismatch
  tipc: set ub->ifindex for local ipv6 address
  ipv6: add ipv6_dev_find()
  net: openvswitch: silence suspicious RCU usage warning
  Revert "vxlan: fix tos value before xmit"
  ptp: only allow phase values lower than 1 period
  farsync: switch from 'pci_' to 'dma_' API
  wan: wanxl: switch from 'pci_' to 'dma_' API
  hv_netvsc: do not use VF device if link is down
  dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
  net: macb: Properly handle phylink on at91sam9x
  ...
2020-08-05 20:13:21 -07:00
Linus Torvalds
442489c219 Time, timers and related driver updates:
- Prevent unnecessary timer softirq invocations by extending the tracking
    of the next expiring timer in the timer wheel beyond the existing NOHZ
    functionality. The tracking overhead at enqueue time is within the
    noise, but on sensitive workloads the avoidance of the soft interrupt
    invocation is a measurable improvement.
 
  - The obligatory new clocksource driver for Ingenic X100 OST
 
  - The usual fixes, improvements, cleanups and extensions for newer chip
    variants all over the driver space.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl8pD7ITHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoRIXD/9VRiGKHIP27O0aoPj9HGFiZyY+bXbC
 xv5HA9CTlJjG23JTZWg13Kk26l8+mzIJoH54nMnceVDdCwPb1e7iRFgefyHOgEW4
 oKpJnwqvGOA9cvAnu8Tl9oNNILUoS2k0dHDeGICMCOqqjycUoKGRPpiizsbXZ08x
 yOLUMktX0wtNnL6DOqOpvmfN+b3T8gO0fuNzgRcvcHZpamQxo7wN2P05mt9nmWLV
 zfEwyhn33Xy9toGPZfkbCYNzVSI3fkMXuMDIkLo5jOtt18i06AeUZov8Z0V7xk9B
 S1lu2HmP4PnX00/P7KB8LwtlhzhM/H7IxK4bxYJYlHmGcd2hJHjKdIfCg3bqo41d
 YmsIelukI3jLvnrB6YXyWx3mt1a8p/i3zf/+Fwqs81qV/60FXhp0zD2QnltJEEC3
 INXrb93CkC5vMqOs0otizL5cPnPhTS0fMe/GhnHlsteUXlqEeJ1HU5f+j0FFaIJA
 h+dEPT57eJwDyuh6iWNHjvAI/HtLSBTsHC0CPWa+DxHKxzItZWpiVl+EEw5ofepX
 zJyf8nxq1nOMDOROCiTxdbyp4yacDk3dak/trbRZCfX9fapSuzJFzDRCM0Ums2lH
 lh12jR9nRZgKb5atC31UUpw4HYZfvcbj2NGr27SAx9b3hh5q6SRW8yowL8tta1lK
 /Afs0OhmQS5Raw==
 =uJnp
 -----END PGP SIGNATURE-----

Merge tag 'timers-core-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "Time, timers and related driver updates:

   - Prevent unnecessary timer softirq invocations by extending the
     tracking of the next expiring timer in the timer wheel beyond the
     existing NOHZ functionality.

     The tracking overhead at enqueue time is within the noise, but on
     sensitive workloads the avoidance of the soft interrupt invocation
     is a measurable improvement.

   - The obligatory new clocksource driver for Ingenic X100 OST

   - The usual fixes, improvements, cleanups and extensions for newer
     chip variants all over the driver space"

* tag 'timers-core-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
  timers: Recalculate next timer interrupt only when necessary
  clocksource/drivers/ingenic: Add support for the Ingenic X1000 OST.
  dt-bindings: timer: Add Ingenic X1000 OST bindings.
  clocksource/drivers: Replace HTTP links with HTTPS ones
  clocksource/drivers/nomadik-mtu: Handle 32kHz clock
  clocksource/drivers/sh_cmt: Use "kHz" for kilohertz
  clocksource/drivers/imx: Add support for i.MX TPM driver with ARM64
  clocksource/drivers/ingenic: Add high resolution timer support for SMP/SMT.
  timers: Lower base clock forwarding threshold
  timers: Remove must_forward_clk
  timers: Spare timer softirq until next expiry
  timers: Expand clk forward logic beyond nohz
  timers: Reuse next expiry cache after nohz exit
  timers: Always keep track of next expiry
  timers: Optimize _next_timer_interrupt() level iteration
  timers: Add comments about calc_index() ceiling work
  timers: Move trigger_dyntick_cpu() to enqueue_timer()
  timers: Use only bucket expiry for base->next_expiry value
  timers: Preserve higher bits of expiration on index calculation
  clocksource/drivers/timer-atmel-tcb: Add sama5d2 support
  ...
2020-08-04 18:17:37 -07:00
Thomas Gleixner
1b7efaa615 - Add sama5d2 support and rework the 32kHz clock handling (Alexandre Belloni)
- Add the high resolution support for SMP/SMT on the Ingenic timer (Zhou Yanjie)
 
 - Add support for i.MX TPM driver with ARM64 (Anson Huang)
 
 - Fix typo by replacing KHz to kHz (Geert Uytterhoeven)
 
 - Add 32kHz support by setting the minimum ticks to 5 on Nomadik MTU (Linus Walleij)
 
 - Replace HTTP links with HTTPS ones for security reasons (Alexander A. Klimov)
 
 - Add support for the Ingenic X1000 OST (Zhou Yanjie)
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAl8ZqeUACgkQqDIjiipP
 6E9tawf/UGUhEfB+VmH9w60NJlM0fC5a/TjVOb4yMjTZjjdyd4zMBHemF+dqMNnw
 wTr+S8U9QfvP4BDgg1hWV+vhAwxz2xkhR0cGtOQjck5322vZglGSmAVqTCAlQMoZ
 LNm98XeUYYVNMB+/+BHkf8F/nHV9vRo8sJg7UnvX/6RCykXFYXVP+P8LfkAU1MPt
 8vaRPCcyGnYXrgjDYY5M5qYudLNpFPrzr1yJDWdwWUliwH3T1X1FNogTdUo955qk
 wM+Hb4yPRuRufM+yATPsRedQypZFpoWFObuEMD2FaIw/LZVxV7D1tmw5KhL2V1tZ
 XSzNiJDEgri/4LaVzXKP7sVlQlZfDQ==
 =DXTp
 -----END PGP SIGNATURE-----

Merge tag 'timers-v5.9' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core

Pull clock event/surce driver changes from Daniel Lezcano:

  - Add sama5d2 support and rework the 32kHz clock handling (Alexandre Belloni)
  - Add the high resolution support for SMP/SMT on the Ingenic timer (Zhou Yanjie)
  - Add support for i.MX TPM driver with ARM64 (Anson Huang)
  - Fix typo by replacing KHz to kHz (Geert Uytterhoeven)
  - Add 32kHz support by setting the minimum ticks to 5 on Nomadik MTU (Linus Walleij)
  - Replace HTTP links with HTTPS ones for security reasons (Alexander A. Klimov)
  - Add support for the Ingenic X1000 OST (Zhou Yanjie)
2020-07-23 21:04:05 +02:00
Arnd Bergmann
18517746d7 Qualcomm driver updates for v5.9
For RPMh this fixes an issue where ktime was used during suspend, allows
 the driver to be used on ARM targets and some minor cleanups.
 
 It adds support for the latest format version in the socinfo driver and
 adds identifiers for SM8250 and SDM630.
 
 SMD-RPM gains compatibles for MSM8994 and MSM8936 and the Qualcomm SCM
 gains compatibles MSM8994 and IPQ8074.
 
 The GENI core code gains interconnect path voting and performance level
 support, with subsequent patches integrating this with the SPI, I2C,
 UART and QSPI drivers.
 
 Following this the KGDB support for the GENI serial driver is improved,
 the performance related to chip-select is improved for SPI and QSPI.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl8WWfsbHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FNB4QAJlOgboPQpxReZ8iJUr7
 C5nyBQEa6jG2HNXKyHA/OKcpuU6kchSqzoU0N7RfsuISrA6RAeBdSc8duQkWFF2u
 pqhbx5KCT5hqeU0rTNtSkKLaJUg+8s3hbnKzvQmBi+GbFUM9Davs1TdT+XpeNRX+
 F9Oly7Wr4LiMA1QHy+hDPLFvQzGtrIkkgvOGXxCiIeC+p3WwlNPltKkaEo/HUirL
 iIhibNwWwHLhBA5pXSew5fnzU7dOU1vsOR4F7Y1mfFP2C4vvDRzEeitcutr/dLYw
 r8ptzvJUwsF2gaSaSE51Ki3ToyNrVhBw9YF00/wLcidBuvXell/VO37J7WWzMpEA
 Iu1Qok+KBo03TmDOpj8nreljCewQv3H3zb0PD/RIRWU5XN7UFckvc+iA0n1m5rXE
 fb0FSYfIZXHRlZCi0xr1cUD/IYXynCYFQ3p+rme8dvlaaxf3wt9jclNXnqXRBb1l
 LUpC33ogD4a6lJypbnz9UjNU+3Ek7nJPoi0OfwOHmVuiOBlMOu7F6kdz5t8tM25m
 K6RHWsMM2M3EsI/YGL3lGQU9EBu0r8tvkDs+JfLodrG6yoISXfUCz52XpvC3UX86
 HBs0NsN47nPmbRk7WrOee/NQn0t1bW8mC7hk6SkoZ6jp4i8SKyuHeCiVXQWbKHaw
 Os2m2MWfrrdnRE4O42BzEeX7
 =Os4F
 -----END PGP SIGNATURE-----

Merge tag 'qcom-drivers-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers

Qualcomm driver updates for v5.9

For RPMh this fixes an issue where ktime was used during suspend, allows
the driver to be used on ARM targets and some minor cleanups.

It adds support for the latest format version in the socinfo driver and
adds identifiers for SM8250 and SDM630.

SMD-RPM gains compatibles for MSM8994 and MSM8936 and the Qualcomm SCM
gains compatibles MSM8994 and IPQ8074.

The GENI core code gains interconnect path voting and performance level
support, with subsequent patches integrating this with the SPI, I2C,
UART and QSPI drivers.

Following this the KGDB support for the GENI serial driver is improved,
the performance related to chip-select is improved for SPI and QSPI.

* tag 'qcom-drivers-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (35 commits)
  soc: qcom: geni: Fix NULL pointer dereference
  tty: serial: qcom-geni-serial: Drop the icc bw votes in suspend for console
  serial: qcom_geni_serial: Always use 4 bytes per TX FIFO word
  serial: qcom_geni_serial: Make kgdb work even if UART isn't console
  spi: spi-geni-qcom: Get rid of most overhead in prepare_message()
  spi: spi-geni-qcom: Set the clock properly at runtime resume
  spi: spi-geni-qcom: Avoid clock setting if not needed
  spi: spi-qcom-qspi: Set an autosuspend delay of 250 ms
  spi: spi-qcom-qspi: Avoid clock setting if not needed
  spi: spi-qcom-qspi: Use OPP API to set clk/perf state
  firmware: qcom_scm: Add msm8994 compatible
  firmware: qcom_scm: Fix legacy convention SCM accessors
  <linux/of.h>: add stub for of_get_next_parent() to fix qcom build error
  dt-bindings: firmware: qcom: Add compatible for IPQ8074 SoC
  spi: spi-geni-qcom: Use OPP API to set clk/perf state
  tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state
  spi: spi-qcom-qspi: Add interconnect support
  spi: spi-geni-qcom: Add interconnect support
  spi: spi-geni-qcom: Combine the clock setting code
  tty: serial: qcom_geni_serial: Add interconnect support
  ...

Link: https://lore.kernel.org/r/20200721044812.3429652-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22 22:36:18 +02:00
Arnd Bergmann
1481fd7139 soc/tegra: Changes for v5.9-rc1
This adds missing SoC IDs for Tegra186 and Tegra194 and fixes a typo in
 a warning message.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl8RzC8THHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoUDDEACgT5pyhIPt8zMSc9F6s8ITBqvyjeE6
 nYMiZUFhPl65eBpDCrTjGKFD1oomY4noMnikOmL374CKd4/jmeQK7FpB9AlshMH6
 55jidZ25li1N/n9DgA17Dcyn7nBiuaKl4NLPveWf6zgmsWBdEItz1KtSTc7eC9ET
 USmL+xwYwfdR70kYc/mX9Bgym+Jf9vmAEKTYzsbin0KpYezYZf+tXi6QdWiUze/s
 klqoWayFYEeP7IPzi6hX3o306qbkLJsl0m7izNYwpOom/2BEw0mhQM13Ax9vg++C
 mUtwtTzXN3pwQEZzy1XkNBU4l5ODWl9NbFF4NJD2wSzZRNRoCiesRLxPEMrK3XIp
 wKki6DIniUyPU8fnKSwUIEgZHPydc/ZdVEXQHz2LTrSvAP3kyDs6QrhNjzQoO2Ij
 oyihUF7fT/WP6Cg8ZueCxCSr2JYCNOrU7R3njwi/x0J416317MTgxP4YyVJnf0ld
 rK3g0Ldb14WmsOar4gw2bdHuQs44Hgh12TZ1esK92TZx88Fm9x4tHTJrMHx7BW7k
 eAMr81DvFE+cVe7cdvTELdq+2se6wel/kHxPy8zCMFZzaBnj0zrHhbdHV6aS//TP
 dYEAaOe2VEvLzHdZ8fUrohPZf+/9AclOaNkXF0iE3tnlZBnzYnyuki6cb3EqPFZY
 rtrKYNQC/eGc8A==
 =B2af
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-5.9-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

soc/tegra: Changes for v5.9-rc1

This adds missing SoC IDs for Tegra186 and Tegra194 and fixes a typo in
a warning message.

* tag 'tegra-for-5.9-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: fuse: Fix typo in APB MISC warning
  soc/tegra: fuse: Add Tegra186 and Tegra194 SoC IDs

Link: https://lore.kernel.org/r/20200717161300.1661002-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-17 21:17:20 +02:00
Sandipan Patra
46011d431b soc/tegra: fuse: Add Tegra186 and Tegra194 SoC IDs
SoC IDs for these generations had never been defined. Do so now.

Signed-off-by: Sandipan Patra <spatra@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-07-17 15:47:34 +02:00
Jon Hunter
4e87189912 firmware: tegra: Update BPMP ABI
Update the BPMP ABI to align with the the latest version.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-07-14 18:03:45 +02:00
Jon Hunter
5e37b9c137 firmware: tegra: Add support for in-band debug
Add support for retrieving BPMP debug information via in-band messaging
as opposed to using shared-memory which older BPMP firmware used. Note
that it is possible to detect at runtime whether the BPMP firmware being
used supports the in-band messaging for retrieving the debug
informaation. Therefore, if the BPMP firmware supports the in-band
messaging for debug use this and otherwise fall-back to using shared
memory.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-07-14 18:01:50 +02:00
Maxim Kochetkov
aa92d836d5 net: mscc: ocelot: extend watermark encoding function
The ocelot_wm_encode function deals with setting thresholds for pause
frame start and stop. In Ocelot and Felix the register layout is the
same, but for Seville, it isn't. The easiest way to accommodate Seville
hardware configuration is to introduce a function pointer for setting
this up.

Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13 17:40:02 -07:00
Maxim Kochetkov
541132f096 net: mscc: ocelot: convert SYS_PAUSE_CFG register access to regfield
Seville has a different bitwise layout than Ocelot and Felix.

Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13 17:40:02 -07:00
Vladimir Oltean
67c2404922 net: dsa: felix: create a template for the DSA tags on xmit
With this patch we try to kill 2 birds with 1 stone.

First of all, some switches that use tag_ocelot.c don't have the exact
same bitfield layout for the DSA tags. The destination ports field is
different for Seville VSC9953 for example. So the choices are to either
duplicate tag_ocelot.c into a new tag_seville.c (sub-optimal) or somehow
take into account a supposed ocelot->dest_ports_offset when packing this
field into the DSA injection header (again not ideal).

Secondly, tag_ocelot.c already needs to memset a 128-bit area to zero
and call some packing() functions of dubious performance in the
fastpath. And most of the values it needs to pack are pretty much
constant (BYPASS=1, SRC_PORT=CPU, DEST=port index). So it would be good
if we could improve that.

The proposed solution is to allocate a memory area per port at probe
time, initialize that with the statically defined bits as per chip
hardware revision, and just perform a simpler memcpy in the fastpath.

Other alternatives have been analyzed, such as:
- Create a separate tag_seville.c: too much code duplication for just 1
  bit field difference.
- Create a separate DSA_TAG_PROTO_SEVILLE under tag_ocelot.c, just like
  tag_brcm.c, which would have a separate .xmit function. Again, too
  much code duplication for just 1 bit field difference.
- Allocate the template from the init function of the tag_ocelot.c
  module, instead of from the driver: couldn't figure out a method of
  accessing the correct port template corresponding to the correct
  tagger in the .xmit function.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13 17:40:01 -07:00
Vladimir Oltean
886e1387c7 net: mscc: ocelot: convert QSYS_SWITCH_PORT_MODE and SYS_PORT_MODE to regfields
Currently Felix and Ocelot share the same bit layout in these per-port
registers, but Seville does not. So we need reg_fields for that.

Actually since these are per-port registers, we need to also specify the
number of ports, and register size per port, and use the regmap API for
multiple ports.

There's a more subtle point to be made about the other 2 register
fields:
- QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG
- QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE
which we are not writing any longer, for 2 reasons:
- Using the previous API (ocelot_write_rix), we were only writing 1 for
  Felix and Ocelot, which was their hardware-default value, and which
  there wasn't any intention in changing.
- In the case of SCH_NEXT_CFG, in fact Seville does not have this
  register field at all, and therefore, if we want to have common code
  we would be required to not write to it.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13 17:40:01 -07:00
Maxim Kochetkov
2789658fa3 soc: mscc: ocelot: add MII registers description
Add the register definitions for the MSCC MIIM MDIO controller in
preparation for seville_vsc9959.c to create its accessors for the
internal MDIO bus.

Since we've introduced elements to ocelot_regfields that are not
instantiated by felix and ocelot, we need to define the size of the
regfields arrays explicitly, otherwise ocelot_regfields_init, which
iterates up to REGFIELD_MAX, will fault on the undefined regfield
entries (if we're lucky).

Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13 17:40:01 -07:00
Vladimir Oltean
91c724cfc0 net: mscc: ocelot: convert port registers to regmap
At the moment, there are some minimal register differences between
VSC7514 Ocelot and VSC9959 Felix. To be precise, the PCS1G registers are
missing from Felix because it was integrated with an NXP PCS.

But with VSC9953 Seville (not yet introduced), the register differences
are more pronounced.  The MAC registers are located at different offsets
within the DEV_GMII target. So we need to refactor the driver to keep a
regmap even for per-port registers. The callers of the ocelot_port_readl
and ocelot_port_writel were kept unchanged, only the implementation is
now more generic.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13 17:40:01 -07:00
Kamel Bouhara
738c58ccac ARM: at91: add atmel tcb capabilities
Some atmel socs have extra tcb capabilities that allow using a generic
clock source or enabling a quadrature decoder.

Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200710230813.1005150-5-alexandre.belloni@bootlin.com
2020-07-11 18:57:03 +02:00
Ilia Lin
6d0efeb14b soc: qcom: Separate kryo l2 accessors from PMU driver
The driver provides kernel level API for other drivers
to access the MSM8996 L2 cache registers.
Separating the L2 access code from the PMU driver and
making it public to allow other drivers use it.
The accesses must be separated with a single spinlock,
maintained in this driver.

Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1593766185-16346-2-git-send-email-loic.poulain@linaro.org
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-10 17:08:55 -07:00
Vladimir Oltean
96b029b004 net: mscc: ocelot: introduce macros for iterating over PGIDs
The current iterators are impossible to understand at first glance
without switching back and forth between the definitions and their
actual use in the for loops.

So introduce some convenience names to help readability.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-22 20:41:05 -07:00
Vladimir Oltean
209edf95da net: dsa: felix: call port mdb operations from ocelot
This adds the mdb hooks in felix and exports the mdb functions from
ocelot.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-22 20:41:05 -07:00
Maulik Shah
73edcd38d7 soc: qcom: rpmh: Update rpmh_invalidate function to return void
Currently rpmh_invalidate() always returns success. Update its
return type to void.

Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/1592485553-29163-1-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-22 14:23:46 -07:00
Vladimir Oltean
aae4e500e1 net: mscc: ocelot: generalize the "ACE/ACL" names
Access Control Lists (and their respective Access Control Entries) are
specifically entries in the VCAP IS2, the security enforcement block,
according to the documentation.
Let's rename the structures and functions to something more generic, so
that VCAP IS1 structures (which would otherwise have to be called
Ingress Classification Entries) can reuse the same code without
confusion.

Some renaming that was done:

struct ocelot_ace_rule -> struct ocelot_vcap_filter
struct ocelot_acl_block -> struct ocelot_vcap_block
enum ocelot_ace_type -> enum ocelot_vcap_key_type
struct ocelot_ace_vlan -> struct ocelot_vcap_key_vlan
enum ocelot_ace_action -> enum ocelot_vcap_action
struct ocelot_ace_stats -> struct ocelot_vcap_stats
enum ocelot_ace_type -> enum ocelot_vcap_key_type
struct ocelot_ace_frame_* -> struct ocelot_vcap_key_*

No functional change is intended.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-20 17:25:23 -07:00
Linus Torvalds
3925c3bbdf pci-v5.8-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl7ZUn8UHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vwuyxAAnjyHTbjpLtFcSh1on0Tsehi6hAiV
 o8w40hj3geQv/zVPgRsui3OSE9PTihPacKUQBxs/7M/iSF3cKzQEreYqDNbOMlun
 957X6CD0yTPChjcHy2brFFhQqs6O8Nl/acvkHKKP369nZkost5A2TMHPSKzKajdB
 fYw6imeunIvSpUYH9GlP9CU+suj25UHQqxUUyXAHqmF4R89j3mTpSMYJzq3VN426
 R77xeRC26lUEHepRgEiaFmdEK0zGTp/uXsJQNwaIFduNfX6x6Oo8u9EC4Mrb48g1
 duoxLUV6a8bqpjkwpPfQIv7lw1Mm1mx/vMA040zGVQR98QAMZacCPJO7eVHM/N9/
 m62bymyKHuNxXhWQwbeAyF0ZH+usaCFh7uidd4L0x1Uvs/GNCGD/icuKxHTnRWLv
 1P4bZg0n23YFzE5/eXY2voos+rfrycIoC5gspuJdP/H2Q5UM/EnI1RhizIItuqJY
 ORAdczo7a8oamt90WWZ636HeL1UQIGZjq1iWz2++vRTJGzfLeuOJj76cn2RuDQsZ
 +rBtQ1zH3saEZSARPdS5HQH+SaDxtjfu/AaAz6NDNSvasDLqmjRdOkM6UIU2pqMG
 cE9um1ijcSy2UjUInVPr3Hk7bbbd9YJTQQiWr04uL6ap0JpwRhSPqQpDHtLwLh+E
 R13t08tEMd09730=
 =9ymj
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Program MPS for RCiEP devices (Ashok Raj)

   - Fix pci_register_host_bridge() device_register() error handling
     (Rob Herring)

   - Fix pci_host_bridge struct device release/free handling (Rob
     Herring)

  Resource management:

   - Allow resizing BARs for devices on root bus (Ard Biesheuvel)

  Power management:

   - Reduce Thunderbolt resume time by working around devices that don't
     support DLL Link Active reporting (Mika Westerberg)

   - Work around a Pericom USB controller OHCI/EHCI PME# defect
     (Kai-Heng Feng)

  Virtualization:

   - Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok
     Raj)

   - Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner)

   - Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven)

  Error handling:

   - Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership
     (Alexandru Gagniuc, Kuppuswamy Sathyanarayanan)

   - Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER
     events (Kuppuswamy Sathyanarayanan)

   - Don't enable AER by default in Kconfig (Bjorn Helgaas)

  Peer-to-peer DMA:

   - Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher)

  ASPM:

   - Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng)

  Endpoint framework:

   - Fix DMA channel release in test (Kunihiko Hayashi)

   - Add page size as argument to pci_epc_mem_init() (Lad Prabhakar)

   - Add support to handle multiple base for mapping outbound memory
     (Lad Prabhakar)

  Generic host bridge driver:

   - Support building as module (Rob Herring)

   - Eliminate pci_host_common_probe wrappers (Rob Herring)

  Amlogic Meson PCIe controller driver:

   - Don't use FAST_LINK_MODE to set up link (Marc Zyngier)

  Broadcom STB PCIe controller driver:

   - Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan)

   - Fix clk_put() error (Jim Quinlan)

   - Fix window register offset (Jim Quinlan)

   - Assert fundamental reset on initialization (Nicolas Saenz Julienne)

   - Add notify xHCI reset property (Nicolas Saenz Julienne)

   - Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas
     Saenz Julienne)

   - Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas
     Saenz Julienne)

  Cadence PCIe controller driver:

   - Remove "cdns,max-outbound-regions" DT property (replaced by
     "ranges") (Kishon Vijay Abraham I)

   - Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT
     (Kishon Vijay Abraham I)

  Marvell Aardvark PCIe controller driver:

   - Improve link training (Marek Behún)

   - Add PHY support (Marek Behún)

   - Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek
     Behún)

   - Train link immediately after enabling training to work around
     detection issues with some cards (Pali Rohár)

   - Issue PERST via GPIO to work around detection issues (Pali Rohár)

   - Don't blindly enable ASPM L0s (Pali Rohár)

   - Replace custom macros by standard linux/pci_regs.h macros (Pali
     Rohár)

  Microsoft Hyper-V host bridge driver:

   - Fix probe failure path to release resource (Wei Hu)

   - Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu)

  Renesas R-Car PCIe controller driver:

   - Fix incorrect programming of OB windows (Andrew Murray)

   - Add suspend/resume (Kazufumi Ikeda)

   - Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar)

   - Add endpoint controller driver (Lad Prabhakar)

   - Fix PCIEPAMR mask calculation (Lad Prabhakar)

   - Add r8a77961 to DT binding (Yoshihiro Shimoda)

  Socionext UniPhier Pro5 controller driver:

   - Add endpoint controller driver (Kunihiko Hayashi)

  Synopsys DesignWare PCIe controller driver:

   - Program outbound ATU upper limit register (Alan Mikhak)

   - Fix inner MSI IRQ domain registration (Marc Zyngier)

  Miscellaneous:

   - Check for platform_get_irq() failure consistently (negative return
     means failure) (Aman Sharma)

   - Fix several runtime PM get/put imbalances (Dinghao Liu)

   - Use flexible-array and struct_size() helpers for code cleanup
     (Gustavo A. R. Silva)

   - Update & fix issues in bridge emulation of PCIe registers (Jon
     Derrick)

   - Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc)
     (Krzysztof Wilczyński)

   - Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)"

* tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits)
  PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver
  PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints
  PCI/DPC: Print IRQ number used by port
  PCI/AER: Use "aer" variable for capability offset
  PCI/AER: Remove redundant dev->aer_cap checks
  PCI/AER: Remove redundant pci_is_pcie() checks
  PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership
  PCI: tegra: Fix runtime PM imbalance on error
  PCI: vmd: Filter resource type bits from shadow register
  PCI: tegra194: Fix runtime PM imbalance on error
  dt-bindings: PCI: Add UniPhier PCIe endpoint controller description
  PCI: hv: Use struct_size() helper
  PCI: Rename _DSM constants to align with spec
  PCI: Avoid FLR for AMD Starship USB 3.0
  PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0
  x86/PCI: Drop unused xen_register_pirq() gsi_override parameter
  PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port
  PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
  PCI: dwc: Fix inner MSI IRQ domain registration
  PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname()
  ...
2020-06-06 11:01:58 -07:00
Linus Torvalds
828f3e18e1 ARM/SoC: drivers for v5.7
These are updates to SoC specific drivers that did not have
 another subsystem maintainer tree to go through for some
 reason:
 
 - Some bus and memory drivers for the MIPS P5600 based
   Baikal-T1 SoC that is getting added through the MIPS tree.
 
 - There are new soc_device identification drivers for TI K3,
   Qualcomm MSM8939
 
 - New reset controller drivers for NXP i.MX8MP, Renesas
   RZ/G1H, and Hisilicon hi6220
 
 - The SCMI firmware interface can now work across ARM SMC/HVC
   as a transport.
 
 - Mediatek platforms now use a new driver for their "MMSYS"
   hardware block that controls clocks and some other aspects
   in behalf of the media and gpu drivers.
 
 - Some Tegra processors have improved power management
   support, including getting woken up by the PMIC and cluster
   power down during idle.
 
 - A new v4l staging driver for Tegra is added.
 
 - Cleanups and minor bugfixes for TI, NXP, Hisilicon,
   Mediatek, and Tegra.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl7XvgAACgkQmmx57+YA
 GNmj/hAAnAJ/hYehLfgCe711HUntgeRkaoTVpCt8BJNMdxsa23sn3V6k5+WYn1uG
 PtlgpefZEMHLUEEVDegR4nZXLG0Pzu1SR12KW34YPcQKkNo/+vlQ9zYUajnJ/KX6
 10zdLSIzHfk1VtXKvvQQ8xFyE+S/trGmjC57E6gfoCUT3rl1maD+ccVXUBaz9oob
 wuMxGXQAl57mio5yT1OfSk6Fev39xRE2dN1hzP7KUYhsemZajBwBBW5wVJZCsCB8
 LCGmxVkavM7BV4r2NokbBDs5rlfedBl/P/IPd9Is5a5tuGUkSsVRG9zqShxYLGM3
 S06az6POQFwXKFJoUKW0dK/Koy0D7BK+vhUBPzFv4HZ8iDCVf6Jju2MJ02GMqHPj
 OOrXaCbLYrvN/edVUWeeFywqwMbYTRwC4DxyTq5m7HxEB004xTOhs0rX5aR0u4n1
 bbsR97LguolwH9iEMzd3F3jCiKBcMecH3lAh5WcrtwlFIRrNhbWoGDoA/4TuORFS
 b11rgsTRIJ5Vc++D1HnSnx0ZZvUzyluMvygdALnSgVah6xYe6KVw9Kg/wioAJ04G
 uSTidqP3qRhsyET2HQo7CxdVfZbKfP25iKCKrdhQziztKvhF8qrUmZKloXOodRw+
 ewYSRmv8c324OYYit1X43oAdW8dntq1XbSIauaqxEb4JC7x/xRY=
 =44Jc
 -----END PGP SIGNATURE-----

Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM/SoC driver updates from Arnd Bergmann:
 "These are updates to SoC specific drivers that did not have another
  subsystem maintainer tree to go through for some reason:

   - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
     that is getting added through the MIPS tree.

   - There are new soc_device identification drivers for TI K3, Qualcomm
     MSM8939

   - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
     Hisilicon hi6220

   - The SCMI firmware interface can now work across ARM SMC/HVC as a
     transport.

   - Mediatek platforms now use a new driver for their "MMSYS" hardware
     block that controls clocks and some other aspects in behalf of the
     media and gpu drivers.

   - Some Tegra processors have improved power management support,
     including getting woken up by the PMIC and cluster power down
     during idle.

   - A new v4l staging driver for Tegra is added.

   - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
     Tegra"

* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
  clk: sprd: fix compile-testing
  bus: bt1-axi: Build the driver into the kernel
  bus: bt1-apb: Build the driver into the kernel
  bus: bt1-axi: Use sysfs_streq instead of strncmp
  bus: bt1-axi: Optimize the return points in the driver
  bus: bt1-apb: Use sysfs_streq instead of strncmp
  bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
  bus: bt1-apb: Fix show/store callback identations
  bus: bt1-apb: Include linux/io.h
  dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
  memory: Add Baikal-T1 L2-cache Control Block driver
  bus: Add Baikal-T1 APB-bus driver
  bus: Add Baikal-T1 AXI-bus driver
  dt-bindings: bus: Add Baikal-T1 APB-bus binding
  dt-bindings: bus: Add Baikal-T1 AXI-bus binding
  staging: tegra-video: fix V4L2 dependency
  tee: fix crypto select
  drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
  soc: ti: add k3 platforms chipid module driver
  dt-bindings: soc: ti: add binding for k3 platforms chipid module
  ...
2020-06-04 19:56:20 -07:00
Linus Torvalds
694b5a5d31 ARM: SoC changes for v5.8
One new platform gets added, the Realtek RTD1195, which is an older
 Cortex-a7 based relative of the RTD12xx chips that are already supported
 in arch/arm64. The platform may also be extended to support running
 32-bit kernels on those 64-bit chips for memory-constrained machines.
 
 In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742,
 an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally
 released in 2016 as one of the last high-end 32-bit designs.
 
 There is ongoing cleanup for the integrator, tegra, imx, and omap2
 platforms, with integrator getting very close to the goal of having
 zero code in arch/arm/, and omap2 moving more of the chip specifics
 from old board code into device tree files.
 
 The Versatile Express platform is made more modular, with built-in
 drivers now becoming loadable modules. This is part of a greater effort
 for the Android OS to have a common kernel binary for all platforms and
 any platform specific code in loadable modules.
 
 The PXA platform drops support for Compulab's pxa2xx boards that had
 rather unusual flash and PCI drivers but no known users remaining.
 All device drivers specific to those boards can now get removed as
 well.
 
 Across platforms, there is ongoing cleanup, with Geert and Rob
 revisiting some a lot of Kconfig options.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl7XvmAACgkQmmx57+YA
 GNk4vRAAs3TxlwLAUk5dknAi+UstlviNPG/ys6mViFuLqktPyhkA/v6nFOBI5Ldf
 8xAsaSk3+oAX3Dd7aTaudl5WMFWFtzT5xA4gEI7CBZrBaAL0BVns1JfnVxpPRIcF
 B09Sb3wv7++E/+AxYcoVLWd5wkc9tlMesrIV5FPHHasOp3rRjVI0cExXnXzqJU8M
 TbwrWEOczZNVAm2q4Eh1ttbuSIvPd3s4NMnI755MRSQ7u/rYFSPf6Ay8/eFTqx1e
 0SMWHRmrGeP6yhLy7+Li0x0jsK3ReZ9SkLXp3iEZ9huKbBTHIPBUeBB1RMnCYGe+
 M2OL+9ySSe9UI9sjvsLGPDAnJaZI/UDUOVhatZCTvYB7CZY5nYNrYp+heYFONWm6
 Up3e1t2iGPbgs8/1y78a9YPxAdsW0iavRtjVUYb+nwX+savYZgSBATA1pZqLc317
 5FAGmTh//OLKYBSjfAxu9H8aInJPZA595lUiPHEQujzZH5Xz0QNtv4dapeNL2I4g
 LO20PMvuEgmwlwj/Npnwdl0UQK3ztoeR2upCrk91VwtNWGiOWTzCMT/OkYAAjKuo
 QYMGu3UvbbTCHPsIdrUz8gZ2T3VnJoeE3ldny2QbNAtVdpH/F8htJcilrBbyv1vI
 IKB1oogf5zfUwXVwZRxCfI9s5hELUlAKMGTtNcybzdsKpN5xtTo=
 =gzCp
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "One new platform gets added, the Realtek RTD1195, which is an older
  Cortex-a7 based relative of the RTD12xx chips that are already
  supported in arch/arm64. The platform may also be extended to support
  running 32-bit kernels on those 64-bit chips for memory-constrained
  machines.

  In the Renesas shmobile platform, we gain support for "RZ/G1H" or
  R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores,
  originally released in 2016 as one of the last high-end 32-bit
  designs.

  There is ongoing cleanup for the integrator, tegra, imx, and omap2
  platforms, with integrator getting very close to the goal of having
  zero code in arch/arm/, and omap2 moving more of the chip specifics
  from old board code into device tree files.

  The Versatile Express platform is made more modular, with built-in
  drivers now becoming loadable modules. This is part of a greater
  effort for the Android OS to have a common kernel binary for all
  platforms and any platform specific code in loadable modules.

  The PXA platform drops support for Compulab's pxa2xx boards that had
  rather unusual flash and PCI drivers but no known users remaining. All
  device drivers specific to those boards can now get removed as well.

  Across platforms, there is ongoing cleanup, with Geert and Rob
  revisiting some a lot of Kconfig options"

* tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
  ARM: omap2: fix omap5_realtime_timer_init definition
  ARM: zynq: Don't select CONFIG_ICST
  ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs
  clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE
  ARM: davinci: fix build failure without I2C
  power: reset: vexpress: fix build issue
  power: vexpress: cleanup: use builtin_platform_driver
  power: vexpress: add suppress_bind_attrs to true
  Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG"
  MAINTAINERS: pxa: remove Compulab arm/pxa support
  ARM: pxa: remove Compulab pxa2xx boards
  bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe()
  soc: imx: move cpu code to drivers/soc/imx
  ARM: imx: move cpu definitions into a header
  ARM: imx: use device_initcall for imx_soc_device_init
  ARM: imx: pcm037: make pcm970_sja1000_platform_data static
  bus: ti-sysc: Timers no longer need legacy quirk handling
  ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter
  ARM: dts: Configure system timers for omap2
  ARM: dts: Configure system timers for ti81xx
  ...
2020-06-04 19:47:11 -07:00
Arnd Bergmann
fb6c05b08b NXP/FSL SoC driver updates for v5.8
DPAA2 DPIO driver
 - Prefer the CPU affined DPIO
 
 QUICC Engine drivers
 - Replace one-element array and use struct_size() helper
 
 Cleanups in various drivers
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEhb3UXAyxp6UQ0v6khtxQDvusFVQFAl7IYJUACgkQhtxQDvus
 FVQS3Q//dkeRknH/s3oJT4X/RQjOLiWl+NjHb4Wmmn/y7qVOz0VsVnihg12546FH
 sU4fu9hv1md1KiL0I2K7booWNnnaoysqrylBGpU6K2UBj2V1WEU9luXWXrzcjLwM
 7nrgBQJ+b/eWoWXmIra5FqItpE1OfMZ84JF0IdXnfHxnCC3STozeXslfh6h70fdq
 OpJzC+GgO9J1I+n2TunbEdWWXo5yzJ4GaQl2+LrV/nMjfApYqVt9qnxEbpJPRntS
 nIAPxqXjc0VKXnA+2d52W2vwXwaWP4YoJ3DsxFLCf55Ux1JBi9XLfflJ9LaQZoJC
 LLTj4wf5XTOtKBn+K4ERAHHJoeXL8fo2ShoGlkNpmbTTyPXP4cDFabK4UBoyCPxf
 BcJlrUEac4O/n+2VvCD9Dj1qQzveNl837muXGNXoq/6M1Hvni6ki2Ij1RA7vh2Kp
 maRv+0dvZ8GLOXqh4veRzJ19cYkqPkrUaf11I7Mm1voFHC7jGYDuyJh6jQLyp1JG
 1TbiDBXSXA5frb6SNSmS7I9ROKdKcOfa2i4mpatrm22wdpcM8HobgDuTtVaOnNCt
 RjuBRiO9nYsHKirsDNGmXtPPrI1mp2qjls0n1ru5I9jI2WaJ7aZjRMwTsVRvjLpe
 TZtOmiXCD0rg+RDMldP/KFnj6TQtM9NdiXTNIZCE3L41ut6s97w=
 =Y7QG
 -----END PGP SIGNATURE-----

Merge tag 'soc-fsl-next-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers

NXP/FSL SoC driver updates for v5.8

DPAA2 DPIO driver
- Prefer the CPU affined DPIO

QUICC Engine drivers
- Replace one-element array and use struct_size() helper

Cleanups in various drivers

* tag 'soc-fsl-next-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: dpio: Remove unused inline function qbman_write_eqcr_am_rt_register
  soc: fsl: qe: clean up an indentation issue
  soc: fsl: dpio: Prefer the CPU affine DPIO
  soc: fsl: qbman: Remove unused inline function qm_eqcr_get_ci_stashing
  soc: fsl: qe: Replace one-element array and use struct_size() helper
  treewide: Replace zero-length array with flexible-array

Link: https://lore.kernel.org/r/20200527215740.9279-1-leoyang.li@nxp.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28 12:45:26 +02:00
Arnd Bergmann
66ee9359b0 i.MX SoC changes for 5.8:
- Add soc device support for Vybrid/VF platform.
 - Move the i.MX soc device registration code from mach-imx to
   drivers/soc/imx for possible future consolidation with i.MX8 code.
 - A small fixup to make pcm970_sja1000_platform_data static.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl7IflgUHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM5Tswf+Id6DM109IHuZxhPWNB5SKEkVa1cr
 v7u7GeT/REqnsVCoFgC0kYIVlOj6nm7F8wwrHziiocvryUV8KPiENG3zMCVzJfLz
 +xkZxIYEuMeLoJjWOz3HeR5bp8G5GeL8sGt2D5OrMh1EUHYTZdnf4/nESvCMJb41
 rOaBRHuhhR1/Dv8qwCkXU9zep/jwlVXf+r6pC5pQNGmUpUGC2VFc7rDYkODS8Jo4
 MfNx5S+HHk2Jabei+6fKEsVG1x7E3lv3ky/ZdVWhjtgy19I32E+o4Cr+UQqegIen
 N4V/Uya6KejSvhaHDf6Pz2TjqTkXxlWSQ0Lu2I7pDMWdU5Upf0iLqbV1rQ==
 =MC2F
 -----END PGP SIGNATURE-----

Merge tag 'imx-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc

i.MX SoC changes for 5.8:

- Add soc device support for Vybrid/VF platform.
- Move the i.MX soc device registration code from mach-imx to
  drivers/soc/imx for possible future consolidation with i.MX8 code.
- A small fixup to make pcm970_sja1000_platform_data static.

* tag 'imx-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: move cpu code to drivers/soc/imx
  ARM: imx: move cpu definitions into a header
  ARM: imx: use device_initcall for imx_soc_device_init
  ARM: imx: pcm037: make pcm970_sja1000_platform_data static
  ARM: vf610: report soc info via soc device

Link: https://lore.kernel.org/r/20200523032516.11016-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-26 00:03:12 +02:00
Arnd Bergmann
502afe7f04 Qualcomm driver updates for v5.8
This contains a large set of cleanups, bug fixes, general improvements
 and documentation fixes for the RPMH driver. It adds a debugfs mechanism
 for inspecting Command DB. Socinfo got the "soc_id" attribute defines
 and definitions for a various variants of MSM8939.
 
 RPMH, RPMPD and RPMHPD where made possible to build as modules, but RPMH
 had to be reverted due to a compilation issue when tracing is enabled.
 
 RPMHPD gained power-domains for the SM8250 voltage corners.
 
 The SCM driver gained fixes for two build warnings and the SMP2P had an
 unnecessary error print removed.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl7DZcEbHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FEwIQAK1TrENzsRjB23fY4pEW
 +hN/SkfMjNPsinmyNOHCo03MQzdFIKUl40aNvaHh3foQXaSG4TW12iot9Ul5nsxn
 /u6dCSzl15FK7pHYj/VQPWTz2WvpANVqsm6G5tf43hBg2TnStbK1AsxgJ6aq47fp
 QHehMbfeKpF/gltEowv1b+H7xwNFY7eqlQ9O9umYm3hUQh3Bl5mI6PdbkazDdO1j
 l/vHuQKkZXRdHtD1BxGBfvhPtM4NWDbOPeWWrw8HRFM5muDPgK9mXMRGDcv+fpHq
 4I3670xiTWK1Mfz9+FRBMoxLkIWT6zXILg9aNzuZMTOLoNRt3s6VNdne6uf3naND
 2Nrcu7t0b+4xWGbdwwpiAFZm8C6l+R1WTCiY4iOJXDychhVvyVwOLzPdZ4i8Pzx9
 a4UJDElu8xj2g++oCcjK816IdNwkA46bM7qVz4mkHRUBMkmK9AU7okBA9HQfbP64
 MrKPaUljyZuy7zonpJJBBDKLDEFa9a1pI8sehU8p+MUldxYB/4f/iGC3KzyDvv4Q
 Uzj6AqdP5pjgIxz98YgpOPPl8pwg1c5OgblNLWoHj4yTaqUzT0ZHIRyQO/O/+3Lg
 HwCrSy+f3+tgzts3DhyVRmOkOXFHfflSdf4rfKtbiq435yB2dz60dt77dJ0jQuBV
 M9MiF+SE9oASUupPhs47kNte
 =tkhb
 -----END PGP SIGNATURE-----

Merge tag 'qcom-drivers-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers

Qualcomm driver updates for v5.8

This contains a large set of cleanups, bug fixes, general improvements
and documentation fixes for the RPMH driver. It adds a debugfs mechanism
for inspecting Command DB. Socinfo got the "soc_id" attribute defines
and definitions for a various variants of MSM8939.

RPMH, RPMPD and RPMHPD where made possible to build as modules, but RPMH
had to be reverted due to a compilation issue when tracing is enabled.

RPMHPD gained power-domains for the SM8250 voltage corners.

The SCM driver gained fixes for two build warnings and the SMP2P had an
unnecessary error print removed.

* tag 'qcom-drivers-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (42 commits)
  Revert "soc: qcom: rpmh: Allow RPMH driver to be loaded as a module"
  soc: qcom: rpmh-rsc: Remove the pm_lock
  soc: qcom: rpmh-rsc: Simplify locking by eliminating the per-TCS lock
  kernel/cpu_pm: Fix uninitted local in cpu_pm
  soc: qcom: rpmh-rsc: We aren't notified of our own failure w/ NOTIFY_BAD
  soc: qcom: rpmh-rsc: Correctly ignore CPU_CLUSTER_PM notifications
  firmware: qcom_scm-legacy: Replace zero-length array with flexible-array
  soc: qcom: rpmh-rsc: Timeout after 1 second in write_tcs_reg_sync()
  soc: qcom: rpmh-rsc: Factor "tcs_reg_addr" and "tcs_cmd_addr" calculation
  soc: qcom: socinfo: add msm8936/39 and apq8036/39 soc ids
  soc: qcom: aoss: Add SM8250 compatible
  soc: qcom: pdr: Remove impossible error condition
  soc: qcom: rpmh: Dirt can only make you dirtier, not cleaner
  soc: qcom: rpmhpd: Add SM8250 power domains
  firmware: qcom_scm: fix bogous abuse of dma-direct internals
  dt-bindings: soc: qcom: apr: Use generic node names for APR services
  firmware: qcom_scm: Remove unneeded conversion to bool
  soc: qcom: cmd-db: Properly endian swap the slv_id for debugfs
  soc: qcom: cmd-db: Use 5 digits for printing address
  soc: qcom: cmd-db: Cast sizeof() to int to silence field width warning
  ...

Link: https://lore.kernel.org/r/20200519052533.1250024-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-25 23:19:06 +02:00
Gustavo A. R. Silva
661ea25e53 soc: fsl: qe: Replace one-element array and use struct_size() helper
The current codebase makes use of one-element arrays in the following
form:

struct something {
    int length;
    u8 data[1];
};

struct something *instance;

instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL);
instance->length = size;
memcpy(instance->data, source, size);

but the preferred mechanism to declare variable-length types such as
these ones is a flexible array member[1][2], introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on. So, replace
the one-element array with a flexible-array member.

Also, make use of the new struct_size() helper to properly calculate the
size of struct qe_firmware.

This issue was found with the help of Coccinelle and, audited and fixed
_manually_.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Qiang Zhao <qiang.zhao@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-05-22 16:23:02 -05:00
Peng Fan
f72130c6b6 ARM: imx: move cpu definitions into a header
The soc device register code will be moved to drivers/soc/imx/,
the code needs the cpu type definitions. So let's move the cpu
type definitions to a header.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-20 23:03:47 +08:00
Nicolas Saenz Julienne
fbbc5ff3f7 firmware: raspberrypi: Introduce vl805 init routine
The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip
that implements xHCI. After a PCI reset, VL805's firmware may either be
loaded directly from an EEPROM or, if not present, by the SoC's
co-processor, VideoCore. RPi4's VideoCore OS contains both the non public
firmware load logic and the VL805 firmware blob. The function this patch
introduces triggers the aforementioned process.

Link: https://lore.kernel.org/r/20200505161318.26200-3-nsaenzjulienne@suse.de
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
2020-05-13 10:53:23 +01:00
Nicolas Saenz Julienne
ca91ddef2e soc: bcm2835: Add notify xHCI reset property
The property is needed in order to trigger VL805's firmware load. Note
that gap between the property introduced and the previous one is due to
the properties not being defined.

Link: https://lore.kernel.org/r/20200505161318.26200-2-nsaenzjulienne@suse.de
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
2020-05-13 10:53:23 +01:00
David S. Miller
3793faad7b Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicts were all overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06 22:10:13 -07:00
Vladimir Oltean
21ce7f3e16 net: dsa: ocelot: the MAC table on Felix is twice as large
When running 'bridge fdb dump' on Felix, sometimes learnt and static MAC
addresses would appear, sometimes they wouldn't.

Turns out, the MAC table has 4096 entries on VSC7514 (Ocelot) and 8192
entries on VSC9959 (Felix), so the existing code from the Ocelot common
library only dumped half of Felix's MAC table. They are both organized
as a 4-way set-associative TCAM, so we just need a single variable
indicating the correct number of rows.

Fixes: 5605194877 ("net: dsa: ocelot: add driver for Felix switch family")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06 17:15:24 -07:00
David S. Miller
d483389678 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Simple overlapping changes to linux/vermagic.h

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25 20:18:53 -07:00
Linus Torvalds
7adc4b3999 ARM: SoC fixes
A few smaller fixes for v5.7-rc3: The majority are fixes for bugs I found
 after restarting my randconfig build testing that had been dormant for
 a while.
 
 On the Nokia N950/N9 phone, a DT fix is required to address a boot
 regression.
 
 For the bcm283x (Raspberry Pi), two DT fixes address minor issues.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl6hsLwACgkQmmx57+YA
 GNmL2hAAsbdQcEkAX/y/dSyCU3rg9qxwAGzpjshewEboLy6Sh4LWShraJ2o8snH6
 EAGVOb8O6giB09DLL9WOCEoVK6nHan98BBEDUvPLobdXkv+zrmva6QHKYHX1y2cs
 TpV/2klyOJn1HHtLzioONbc37FtFEdW4DVf/2WH12u9hGUOLat5ULIeXtakrj9xy
 iL/BuLcYW396ZGTTFa1XkLeCqzRvtkAqoMtZIjr2hXTi/IkgkIUZRatIRu54pKYo
 VNiwY9BnCJknl+QmPkavmm9qdZhmJU4cxFX+wnu7Sh45Xflw9J14J16wBe/BZWO+
 joOtpak+sF+kYPnS5Uv9Ie3dalo98w0CBYf40x2dznnqMyOJtPPbLhwjf3jzcLhk
 dUVHra14vaWMtPCHg/PDTBjtxu2SaLWcELqn3hek/Zwr09zUgelyTquTAoHkXzgF
 ApYtT8ym04y9uirFf1Cg59bBxmIoC85I4l487ly0SQtU7vE4piSM2KI+jnp3zn+3
 +7TC85UYhtqNu7asYLAN6PcOOg+p4jpRyW/SK3dSoJw1f839fKji77aeEnIAEWxN
 Qb4qJHYL+9Xy47mjJjH3TarRo7QulGiAgZV21uOrZecDiM8bMpDGtRXTqAW8yfsb
 awDLmGvBaYb+xN/cc3X73inhXct48OLvz5GKRYLtIOzQFxAu/cM=
 =K1jH
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "A few smaller fixes for v5.7-rc3: The majority are fixes for bugs I
  found after restarting my randconfig build testing that had been
  dormant for a while.

  On the Nokia N950/N9 phone, a DT fix is required to address a boot
  regression.

  For the bcm283x (Raspberry Pi), two DT fixes address minor issues"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  soc: imx8: select SOC_BUS
  soc: tegra: fix tegra_pmc_get_suspend_mode definition
  soc: fsl: dpio: avoid stack usage warning
  soc: fsl: dpio: fix incorrect pointer conversions
  ARM: imx: provide v7_cpu_resume() only on ARM_CPU_SUSPEND=y
  ARM: dts: bcm283x: Disable dsi0 node
  firmware: xilinx: make firmware_debugfs_root static
  drivers: soc: xilinx: fix firmware driver Kconfig dependency
  ARM: dts: bcm283x: Add cells encoding format to firmware bus
  ARM: dts: OMAP3: disable RNG on N950/N9
2020-04-23 09:36:40 -07:00
Yangbo Lu
cc2d87bb83 net: mscc: ocelot: support 4 PTP programmable pins
Support 4 PTP programmable pins with only PTP_PF_PEROUT function
for now. The PTP_PF_EXTTS function will be supported in the
future, and it should be implemented separately for Felix and
Ocelot, because of different hardware interrupt implementation
in them.

Since the hardware is not able to support absolute start time,
the periodic clock request only allows start time 0 0. But nsec
could be accepted for PPS case for phase adjustment.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21 15:38:33 -07:00
Yangbo Lu
94aca08244 net: mscc: ocelot: add wave programming registers definitions
Add wave programming registers definitions for Ocelot platforms.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21 15:38:33 -07:00
Yangbo Lu
3007bc7321 net: mscc: ocelot: redefine PTP pins
There are 5 PTP_PINS register groups on Ocelot switch.
Except the one used for TOD operations, there are still
4 register groups for programmable pins. So redefine the
4 programmable pins.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21 15:38:33 -07:00
Yangbo Lu
2b49d128b3 net: mscc: ocelot: move ocelot ptp clock code out of ocelot.c
The Ocelot PTP clock driver had been embedded into ocelot.c driver.
It had supported basic gettime64/settime64/adjtime/adjfine functions
by now which were used by both Ocelot switch and Felix switch.

This patch is to move current ptp clock code out of ocelot.c driver
maintaining as a single ocelot_ptp.c.
For futher new features implementation, the common code could be put
in ocelot_ptp.c and the switch specific code should be in specific
switch driver. The interrupt implementation in SoC is different
between Ocelot and Felix.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21 15:38:33 -07:00
Arnd Bergmann
b1018eb75c soc: tegra: fix tegra_pmc_get_suspend_mode definition
When CONFIG_PM_SLEEP is disabled, the function is not defined,
causing a link failure:

arm-linux-gnueabi-ld: drivers/cpuidle/cpuidle-tegra.o: in function `tegra_cpuidle_probe':
cpuidle-tegra.c:(.text+0x24): undefined reference to `tegra_pmc_get_suspend_mode'

Change the #ifdef check according to the definition.

Fixes: 382ac8e22b ("cpuidle: tegra: Disable CC6 state if LP2 unavailable")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-04-17 17:20:44 +02:00
Vladimir Oltean
87b0f983f6 net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge
To rehash a previous explanation given in commit 1c44ce560b ("net:
mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is
up"), the switch driver operates the in a mode where a single VLAN can
be transmitted as untagged on a particular egress port. That is the
"native VLAN on trunk port" use case.

The configuration for this native VLAN is driven in 2 ways:
 - Set the egress port rewriter to strip the VLAN tag for the native
   VID (as it is egress-untagged, after all).
 - Configure the ingress port to drop untagged and priority-tagged
   traffic, if there is no native VLAN. The intention of this setting is
   that a trunk port with no native VLAN should not accept untagged
   traffic.

Since both of the above configurations for the native VLAN should only
be done if VLAN awareness is requested, they are actually done from the
ocelot_port_vlan_filtering function, after the basic procedure of
toggling the VLAN awareness flag of the port.

But there's a problem with that simplistic approach: we are trying to
juggle with 2 independent variables from a single function:
 - Native VLAN of the port - its value is held in port->vid.
 - VLAN awareness state of the port - currently there are some issues
   here, more on that later*.
The actual problem can be seen when enslaving the switch ports to a VLAN
filtering bridge:
 0. The driver configures a pvid of zero for each port, when in
    standalone mode. While the bridge configures a default_pvid of 1 for
    each port that gets added as a slave to it.
 1. The bridge calls ocelot_port_vlan_filtering with vlan_aware=true.
    The VLAN-filtering-dependent portion of the native VLAN
    configuration is done, considering that the native VLAN is 0.
 2. The bridge calls ocelot_vlan_add with vid=1, pvid=true,
    untagged=true. The native VLAN changes to 1 (change which gets
    propagated to hardware).
 3. ??? - nobody calls ocelot_port_vlan_filtering again, to reapply the
    VLAN-filtering-dependent portion of the native VLAN configuration,
    for the new native VLAN of 1. One can notice that after toggling "ip
    link set dev br0 type bridge vlan_filtering 0 && ip link set dev br0
    type bridge vlan_filtering 1", the new native VLAN finally makes it
    through and untagged traffic finally starts flowing again. But
    obviously that shouldn't be needed.

So it is clear that 2 independent variables need to both re-trigger the
native VLAN configuration. So we introduce the second variable as
ocelot_port->vlan_aware.

*Actually both the DSA Felix driver and the Ocelot driver already had
each its own variable:
 - Ocelot: ocelot_port_private->vlan_aware
 - Felix: dsa_port->vlan_filtering
but the common Ocelot library needs to work with a single, common,
variable, so there is some refactoring done to move the vlan_aware
property from the private structure into the common ocelot_port
structure.

Fixes: 97bb69e1e3 ("net: mscc: ocelot: break apart ocelot_vlan_port_apply")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-15 12:27:35 -07:00
Sibi Sankar
7ad18bb5c2 soc: qcom: cmd-db: Fix compilation error when CMD_DB is disabled
If CONFIG_QCOM_COMMAND_DB=n the following compilation errors will be
seen. Fix this by including the appropriate linux headers.

./include/soc/qcom/cmd-db.h: In function ‘cmd_db_read_aux_data’:
./include/soc/qcom/cmd-db.h: error: implicit declaration of function ‘ERR_PTR’;

Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200227125615.4727-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-13 18:10:10 -07:00
Linus Torvalds
d18292dc07 ARM: driver updates
These are the usual updates for SoC specific device drivers and related
 subsystems that don't have their own top-level maintainers:
 
 - ARM SCMI/SCPI updates to allow pluggable transport layers
 
 - TEE subsystem cleanups
 
 - A new driver for the Amlogic secure power domain controller
 
 - Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU and
   TI OMAP2+ sysc drivers.
 
 - Qualcomm SoC driver updates, including a new library module for
   "protection domain" notifications
 
 - Lots of smaller bugfixes and cleanups in other drivers
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl6EaKsACgkQmmx57+YA
 GNng5RAAnSi3jLBG3PsX4XCydurlhbYDnakzp2x7kNi0aeN0mR7YT6nbmm8Iax0A
 tYpUNt6mhsSnE7thAX6kIm1CIPw7oKzg5tz9TaNRJT6q1i0+MA0bWAX0KOVzruj5
 xllUIoV0WsYHRjqjxWOJht7zYKTX5PoKr3weRVqHYR60hjkNFT4Myx3HpXn5nQ46
 sEgic+S8WCsbffPqs5HUqkNx9R6D7RIJ72BFSF7o1wy2Brj+g0BxfxAjty+kaWwT
 LtsJm0naGGRag17iij7wBnZ+odWNi80qhtthUncx/c5s517J8Z7Nq2QZJa7XhhjV
 9+/1av7wKyE+V54wnCP4ACZjyE+xE3ghzVxOuzjZfbhkmNCELAx2jmQJbt9gr/t4
 Uek8iANq3bo0epy4iJglfeEJuZ8rZal3oC1gU5rCun/VsqPe5OWhFCzvhu7zVgnD
 Npk/IhCrp7117v5DG2Pvhd9YxigZ4ju3NW2gWukh0TemejRIzyoZyNWux+JD/jCn
 V3ANtT4aCqTJ3ZOL7IaDcX5Kze4KmZZvNKvSSCndcen7u95Z8eW9sIKkSrlp3P5f
 cZAdyULX22im6jXzNz4DJYFRrYgRdXfRLyrS555rGoYZGB1FB1Jhl7SUr385XpBZ
 XD18oPIPm0C3Dn/nhbKC8K44tpKazET8aMCg5lO4bzI5EwqingI=
 =qbsP
 -----END PGP SIGNATURE-----

Merge tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM driver updates from Arnd Bergmann:
 "These are the usual updates for SoC specific device drivers and
  related subsystems that don't have their own top-level maintainers:

   - ARM SCMI/SCPI updates to allow pluggable transport layers

   - TEE subsystem cleanups

   - A new driver for the Amlogic secure power domain controller

   - Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU
     and TI OMAP2+ sysc drivers.

   - Qualcomm SoC driver updates, including a new library module for
     "protection domain" notifications

   - Lots of smaller bugfixes and cleanups in other drivers"

* tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits)
  soc: fsl: qe: fix sparse warnings for ucc_slow.c
  soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
  soc: fsl: qe: fix sparse warnings for ucc_fast.c
  soc: fsl: qe: fix sparse warnings for qe_ic.c
  soc: fsl: qe: fix sparse warnings for ucc.c
  soc: fsl: qe: fix sparse warning for qe_common.c
  soc: fsl: qe: fix sparse warnings for qe.c
  soc: qcom: Fix QCOM_APR dependencies
  soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb
  soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
  firmware: imx: add COMPILE_TEST for IMX_SCU driver
  soc: imx: gpc: fix power up sequencing
  soc: imx: increase build coverage for imx8m soc driver
  soc: qcom: apr: Add avs/audio tracking functionality
  dt-bindings: soc: qcom: apr: Add protection domain bindings
  soc: qcom: Introduce Protection Domain Restart helpers
  devicetree: bindings: firmware: add ipq806x to qcom_scm
  memory: tegra: Correct debugfs clk rate-range on Tegra124
  memory: tegra: Correct debugfs clk rate-range on Tegra30
  memory: tegra: Correct debugfs clk rate-range on Tegra20
  ...
2020-04-03 15:05:35 -07:00
Linus Torvalds
0e8fb69f28 ARM: SoC updates
The code changes are mostly for 32-bit platforms and include:
 
 - Lots of updates for the Nvidia Tegra platform, including
   cpuidle, pmc, and dt-binding changes
 
 - Microchip at91 power management updates for the recently added
   sam9x60 SoC
 
 - Treewide setup_irq deprecation by afzal mohammed
 
 - STMicroelectronics stm32 gains earlycon support
 
 - Renesas platforms with Cortex-A9 can now use the global timer
 
 - Some TI OMAP2+ platforms gain cpuidle support
 
 - Various cleanups for the i.MX6 and Orion platforms, as well as
   Kconfig files across all platforms
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl6EaLsACgkQmmx57+YA
 GNkg/Q/9EmLGT/bznqi6P/8V75qPY6j4swife5HlI43EdCEyN+iME1w1rFfrNilf
 A/QyXzxhYgUZoyIt7K4qjWc8fPNlJZ8X10UqeEftQFxi82cmX2+OaT2fy6OdHVRJ
 SAGb1pw7463TQ6LKA7LC7rztFjahsjnE/9szlgXQT4v5OzayGyxd3OKy2Q1zASEi
 rwN+85Lh+xJvWhhenPKVvs2Dei+up8Y9uyPfJkj2QudCB+zx5k5stkk4EiQLBd1W
 SHzhijbSU3MrAUz2Cnp9Qa+86DdGPvFPfpzQy3pSYU9nNrC0aKpS8YmHT99SIWVN
 6R1YJF7Htmui5I9+O0baejJMEqvzGUysqe+rQdCofD7ooVKWU7WKYj5HxZxyBCEN
 dvlN3KRmS6l5KLsZARSxuBUw2MPTgjsxczZ84NKMLj8czw6yXyrePZ1RWiEZ4HIu
 4GiFNLYSMmAynD/dLuC9USDsjlPsQKnQ3e8hDf3a6oK5OHUIkr3uvguhqWa5WJsi
 cy2DUeWJkXgJDhlxcfr8MiPpPJRo3N/8O8PYci8dkdDFRs32j/5Qf22vywDdUHaZ
 I9Pl+VOGOSGiqRc9gmay6DNXpJusfuv72omrz4rL4kGMahpk0LeV5w+a9TdrkreY
 sLM67wtshOjOVMc/ebQ5Q8RR17Go+MFK+Co9Yc1ybbQ6lkSzeuY=
 =UTk1
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "The code changes are mostly for 32-bit platforms and include:

   - Lots of updates for the Nvidia Tegra platform, including cpuidle,
     pmc, and dt-binding changes

   - Microchip at91 power management updates for the recently added
     sam9x60 SoC

   - Treewide setup_irq deprecation by afzal mohammed

   - STMicroelectronics stm32 gains earlycon support

   - Renesas platforms with Cortex-A9 can now use the global timer

   - Some TI OMAP2+ platforms gain cpuidle support

   - Various cleanups for the i.MX6 and Orion platforms, as well as
     Kconfig files across all platforms"

* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
  ARM: qcom: Add support for IPQ40xx
  ARM: mmp: replace setup_irq() by request_irq()
  ARM: cns3xxx: replace setup_irq() by request_irq()
  ARM: spear: replace setup_irq() by request_irq()
  ARM: ep93xx: Replace setup_irq() by request_irq()
  ARM: iop32x: replace setup_irq() by request_irq()
  arm: mach-dove: Mark dove_io_desc as __maybe_unused
  ARM: orion: replace setup_irq() by request_irq()
  ARM: debug: stm32: add UART early console support for STM32MP1
  ARM: debug: stm32: add UART early console support for STM32H7
  ARM: debug: stm32: add UART early console configuration for STM32F7
  ARM: debug: stm32: add UART early console configuration for STM32F4
  cpuidle: tegra: Disable CC6 state if LP2 unavailable
  cpuidle: tegra: Squash Tegra114 driver into the common driver
  cpuidle: tegra: Squash Tegra30 driver into the common driver
  cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
  ARM: tegra: cpuidle: Remove unnecessary memory barrier
  ARM: tegra: cpuidle: Make abort_flag atomic
  ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
  ARM: tegra: Make outer_disable() open-coded
  ...
2020-04-03 15:02:35 -07:00
Linus Torvalds
86f26a77cb pci-v5.7-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl6GTQMUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vy3PhAAmqpYBRobOsG8QbmKDjoJEFtkqdvD
 z6+4zf/R+hF11RyXjMDwihIe8d+tkQ4eAaYu6Oh5PrTyanz0G0PgeCrivZeytULk
 thqQIWzDQMVA5vN/2/Vy8s5s+3HzP8z/MZOFScJ7+xA1MndXptPRTNmFUbjx+GAv
 x8/pTp0u9AF6m7itX65DxXvwkzjWamt+Ar4Yx2IcuKAU/M5RtfuZO3PpDnqn7/wk
 JFlkRoYeFB6qNnnkPdeyPHl9dALhuhzgdTyklQEnKVW3nf3xThYDhcEwdh6kBQgl
 0dH8lL5LXy7PKGN8RES4wB0Vqndw/HlsCF5O4wkkfItbnbJxGJtS139e5973m0ud
 sgWvF4yJAT2jCKhIeNz34sePQJMyWALhv0XzZCsJ0YeGHsrV1jrHELkwUT1+eIsT
 3UV0iZ6aL06zQJDyKUbbIcQzEQ/wwBC+x9VgsyL54K1quCQZ1N1Nl/dvrb4cRG9m
 m9EhJK/brDf4c0uFlOmMTSxV1t5J+z6ZSQnh1ShD/o5yBsxqN6q5brDT6LEs+jbM
 LsIkA18jJOd4OyiDs98YiFKvIfFQbQ0LEBQpJwhF0snvfBFMMbUYN/T/NYneWON/
 F0TpkFoP7PXDuq55iNaLdnObfzrpC9kdzUyWvePUvjxIl55bkf+/qtUny+H48t4L
 dNggvW052d7BHes=
 =deWu
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg)

   - Add more 32 GT/s link speed decoding and improve the implementation
     (Yicong Yang)

  Resource management:

   - Add support for sizing programmable host bridge apertures and fix a
     related alpha Nautilus regression (Ivan Kokshaysky)

  Interrupts:

   - Add boot interrupt quirk mechanism for Xeon chipsets and document
     boot interrupts (Sean V Kelley)

  PCIe native device hotplug:

   - When possible, disable in-band presence detect and use PDS
     (Alexandru Gagniuc)

   - Add DMI table for devices that don't use in-band presence detection
     but don't advertise that correctly (Stuart Hayes)

   - Fix hang when powering slots up/down via sysfs (Lukas Wunner)

   - Fix an MSI interrupt race (Stuart Hayes)

  Virtualization:

   - Add ACS quirks for Zhaoxin devices (Raymond Pang)

  Error handling:

   - Add Error Disconnect Recover (EDR) support so firmware can report
     devices disconnected via DPC and we can try to recover (Kuppuswamy
     Sathyanarayanan)

  Peer-to-peer DMA:

   - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew
     Maier)

  ASPM:

   - Reduce severity of common clock config message (Chris Packham)

   - Clear the correct bits when enabling L1 substates, so we don't go
     to the wrong state (Yicong Yang)

  Endpoint framework:

   - Replace EPF linkup ops with notifier call chain and improve locking
     (Kishon Vijay Abraham I)

   - Fix concurrent memory allocation in OB address region (Kishon Vijay
     Abraham I)

   - Move PF function number assignment to EPC core to support multiple
     function creation methods (Kishon Vijay Abraham I)

   - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi)

   - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table
     Offset (Kishon Vijay Abraham I)

   - Add support for testing DMA transfers (Kishon Vijay Abraham I)

   - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I)

   - Add support for tests to clear IRQ (Kishon Vijay Abraham I)

   - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I)

  Amlogic Meson PCIe controller driver:

   - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi
     Pommarel)

   - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi
     Pommarel)

  Cadence PCIe controller driver:

   - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay
     Abraham I)

  Intel VMD host bridge driver:

   - Add two VMD Device IDs that require bus restriction mode (Sushma
     Kalakota)

  Mobiveil PCIe controller driver:

   - Refactor and modularize mobiveil driver (Hou Zhiqiang)

   - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang)

  Microsoft Hyper-V host bridge driver:

   - Add support for Hyper-V PCI protocol version 1.3 and
     PCI_BUS_RELATIONS2 (Long Li)

   - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun
     Feng)

   - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui)

  NVIDIA Tegra PCIe controller driver:

   - Use pci_parse_request_of_pci_ranges() (Rob Herring)

   - Add support for endpoint mode and related DT updates (Vidya Sagar)

   - Reduce -EPROBE_DEFER error message log level (Thierry Reding)

  Qualcomm PCIe controller driver:

   - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson)

  Synopsys DesignWare PCIe controller driver:

   - Refactor core initialization code for endpoint mode (Vidya Sagar)

   - Fix endpoint MSI-X to use correct table address (Kishon Vijay
     Abraham I)

  TI DRA7xx PCIe controller driver:

   - Fix MSI IRQ handling (Vignesh Raghavendra)

  TI Keystone PCIe controller driver:

   - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I)

  Miscellaneous:

   - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng
     Feng)

   - Use ioremap(), not phys_to_virt(), for platform ROM to fix video
     ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)"

* tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits)
  misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS
  PCI: tegra: Print -EPROBE_DEFER error message at debug level
  misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq()
  misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices
  tools: PCI: Add 'e' to clear IRQ
  misc: pci_endpoint_test: Add ioctl to clear IRQ
  misc: pci_endpoint_test: Avoid using module parameter to determine irqtype
  PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt
  PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address
  PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments
  misc: pci_endpoint_test: Add support to get DMA option from userspace
  tools: PCI: Add 'd' command line option to support DMA
  misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation
  PCI: endpoint: functions/pci-epf-test: Print throughput information
  PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data
  PCI: pciehp: Fix MSI interrupt race
  PCI: pciehp: Fix indefinite wait on sysfs requests
  PCI: endpoint: Fix clearing start entry in configfs
  PCI: tegra: Add support for PCIe endpoint mode in Tegra194
  PCI: sysfs: Revert "rescan" file renames
  ...
2020-04-03 14:25:02 -07:00
Vladimir Oltean
fc411eaac8 net: dsa: felix: add port policers
This patch is a trivial passthrough towards the ocelot library, which
support port policers since commit 2c1d029a01 ("net: mscc: ocelot:
Implement port policers via tc command").

Some data structure conversion between the DSA core and the Ocelot
library is necessary, for policer parameters.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30 11:44:00 -07:00
Xiaoliang Yang
c9a7fe1238 net: mscc: ocelot: add action of police on vcap_is2
Ocelot has 384 policers that can be allocated to ingress ports,
QoS classes per port, and VCAP IS2 entries. ocelot_police.c
supports to set policers which can be allocated to police action
of VCAP IS2. We allocate policers from maximum pol_id, and
decrease the pol_id when add a new vcap_is2 entry which is
police action.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30 11:44:00 -07:00
Vladimir Oltean
0b912fc93a net: dsa: felix: support changing the MTU
Changing the MTU for this switch means altering the
DEV_GMII:MAC_CFG_STATUS:MAC_MAXLEN_CFG field MAX_LEN, which in turn
limits the size of frames that can be received.

Special accounting needs to be done for the DSA CPU port (NPI port in
hardware terms). The NPI port configuration needs to be held inside the
private ocelot structure, since it is now accessed from multiple places.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 16:07:25 -07:00
Arnd Bergmann
3a3052f1fc Merge tag 'soc-fsl-next-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers
NXP/FSL SoC driver updates for v5.7

DPAA2 DPIO driver performance optimization
- Add and use QMAN multiple enqueue interface
- Use function pointer indirection to replace checks in hotpath

QUICC Engine drivers
- Fix sparse warnings and exposed endian issues

* tag 'soc-fsl-next-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: qe: fix sparse warnings for ucc_slow.c
  soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
  soc: fsl: qe: fix sparse warnings for ucc_fast.c
  soc: fsl: qe: fix sparse warnings for qe_ic.c
  soc: fsl: qe: fix sparse warnings for ucc.c
  soc: fsl: qe: fix sparse warning for qe_common.c
  soc: fsl: qe: fix sparse warnings for qe.c
  soc: fsl: dpio: fix dereference of pointer p before null check
  soc: fsl: dpio: Replace QMAN array mode with ring mode enqueue
  soc: fsl: dpio: QMAN performance improvement with function pointer indirection
  soc: fsl: dpio: Adding QMAN multiple enqueue interface

Link: https://lore.kernel.org/r/20200326001257.22696-1-leoyang.li@nxp.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-27 14:26:14 +01:00
Arnd Bergmann
c43ff6a814 cpuidle: tegra: Changes for v5.7-rc1
These changes unify CPU idle support for Tegra20, Tegra30 and Tegra114.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl5rthATHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoZsmD/9qN5NeerI3PxQxDXYljyAJdhXwkRrV
 Wliy4BXjMFxwfML1EH2oPBLk+UA8LLhzA3Ai+6qFj/6H+RQcOywdOgyg5913beW9
 q0WmPHyaQig7cAAOkI6ke6md0oLmx4nMrS8oX5Ofjd3tfUqo+Y9JT/cvqeiDI7UH
 c6/HJy9RaUctDvd7KYCSiH74ZRVjYP0xnbc+Q/uue6Nl0Ka/tbxEFmk/Q6br2K0c
 SJXqOroRXongO8WG1w+fQ/MpzluWXArTJmQR8lB38slYhUDa1wL4QRerwtInlffJ
 hp/jp1xQ4zx7j5xnvMulj6jC25Pzm69SMpTT4amY+bs33KIqmrdeaCAGmG/70ZoS
 dGbdKyiAgpGl8jDbt7wVo+WtQRPGwoJa+Xh+z6H137R6ed59DYgv2f+t5GHwHq9J
 iQvWcI9V6SjS9G5caPCE8X5ZdLgCzD4w1Q10vxLTryFuaUJog+13BtfmI34RJAR7
 YZ5V9CI+eooHcwiit0aL2IrgA6c9UVrpNR15dxig7KMkJgeY1mngniJ8zqNdjMN8
 ZvmaXCNuJdVTAX7QSB0PA1Wg8XI5KN7OzTyE26C3o4x1vI2Z62SPDkaZRsTPJR/R
 jRixb5bYmdIWa3HeVkeDziAjP/lx5e59j35QpHPo2XQo5wz82Vc4PEIqqsgDp4KH
 yiVXVaXys3n3Ug==
 =u9vo
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-5.7-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc

cpuidle: tegra: Changes for v5.7-rc1

These changes unify CPU idle support for Tegra20, Tegra30 and Tegra114.

* tag 'tegra-for-5.7-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  cpuidle: tegra: Disable CC6 state if LP2 unavailable
  cpuidle: tegra: Squash Tegra114 driver into the common driver
  cpuidle: tegra: Squash Tegra30 driver into the common driver
  cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle

Link: https://lore.kernel.org/r/20200313165848.2915133-9-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25 21:10:14 +01:00
Arnd Bergmann
10996b2404 ARM: tegra: Core changes for v5.7-rc1
These patches a preparatory work to move the CPU idle drivers into
 drivers/cpuidle.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl5rtDcTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoYSRD/98HactRMwJb41LlLpaUeNT/xTQk/DB
 k+Y0NkeiT34QE7c+UcSeDXecnipuajB3kB7kd64lSS0DI0V+KZam1qZUsMTqG7D3
 ZLvzIJXykoGf19QC89nN7TnRy/jjRO8ITk/dFjj1BwSP0M1WuWlQAHNXczRyEP77
 OLvViPH8YzLkDe2TH8AhbF/zCCnmW9lqCE8oJuQMdMmQo3qOLL6c/CZcxkzo3iVn
 rUu1uIgNXiY5fBTgl1woP7mSHgYytjAm4WouSpJRoPAodKqlaI61rb7gwbrav+rQ
 2kkORNxOr5Eo36wszxxzknY18PCCjbZtNFrZyAGdmu0IePDdxMiWG2z+30OGESam
 qlzia0Yz82pSBBRgxVO03oTpZGh9jxdHoubIRR3UGVAttD8rdC4xjIkxjv+FbPp/
 A0yVKqA5GFpftUKOKFoC056nByfH2UE1XrPoPWKuu9+ED5vKh7tC4cMEJhhUOA6N
 6+pqE8FsZ0NTjxT7pvrPtvTI9lCVy8UTTWQomnd1HMxT2tJEijq1mTVPrsZISYQq
 +DDsww1UpblslFQwZMoGp8D9IXF3VdvmQae/0ko63XUYDw2Nz4gP7yw+mQoDoALP
 M9W3FE2XK3u0NsCV76nG1yjJ6CtHgMnZx+DM4VwNZ5m29XUvmdwVwcsv2lrP0TES
 HWpsPD3vQdatug==
 =nOBN
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-5.7-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc

ARM: tegra: Core changes for v5.7-rc1

These patches a preparatory work to move the CPU idle drivers into
drivers/cpuidle.

* tag 'tegra-for-5.7-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: cpuidle: Remove unnecessary memory barrier
  ARM: tegra: cpuidle: Make abort_flag atomic
  ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
  ARM: tegra: Make outer_disable() open-coded
  ARM: tegra: Rename some of the newly exposed PM functions
  ARM: tegra: Expose PM functions required for new cpuidle driver
  ARM: tegra: Propagate error from tegra_idle_lp2_last()
  ARM: tegra: Change tegra_set_cpu_in_lp2() type to void
  ARM: tegra: Remove pen-locking from cpuidle-tegra20
  ARM: tegra: Add tegra_pm_park_secondary_cpu()
  ARM: tegra: Compile sleep-tegra20/30.S unconditionally

Link: https://lore.kernel.org/r/20200313165848.2915133-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25 20:58:56 +01:00
Li Yang
461c3ac0dc soc: fsl: qe: fix sparse warnings for ucc_slow.c
Fixes the following sparse warnings, some of these endian issues are
real issues that need to be fixed.

drivers/soc/fsl/qe/ucc_slow.c:78:17: warning: incorrect type in assignment (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:78:17:    expected struct ucc_slow *us_regs
drivers/soc/fsl/qe/ucc_slow.c:78:17:    got struct ucc_slow [noderef] <asn:2> *us_regs
drivers/soc/fsl/qe/ucc_slow.c:81:18: warning: incorrect type in argument 1 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:81:18:    expected void const volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:81:18:    got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:90:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:90:9:    expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:90:9:    got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:99:17: warning: incorrect type in assignment (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:99:17:    expected struct ucc_slow *us_regs
drivers/soc/fsl/qe/ucc_slow.c:99:17:    got struct ucc_slow [noderef] <asn:2> *us_regs
drivers/soc/fsl/qe/ucc_slow.c:102:18: warning: incorrect type in argument 1 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:102:18:    expected void const volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:102:18:    got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:111:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:111:9:    expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:111:9:    got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:172:28: warning: Using plain integer as NULL pointer
drivers/soc/fsl/qe/ucc_slow.c:174:25: warning: cast removes address space '<asn:2>' of expression
drivers/soc/fsl/qe/ucc_slow.c:175:25: warning: cast removes address space '<asn:2>' of expression
drivers/soc/fsl/qe/ucc_slow.c:194:23: warning: incorrect type in assignment (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:194:23:    expected struct ucc_slow_pram *us_pram
drivers/soc/fsl/qe/ucc_slow.c:194:23:    got void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:204:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:204:9:    expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:204:9:    got restricted __be16 *
drivers/soc/fsl/qe/ucc_slow.c:229:41: warning: incorrect type in assignment (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:229:41:    expected struct qe_bd *tx_bd
drivers/soc/fsl/qe/ucc_slow.c:229:41:    got void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:232:17: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:232:17:    expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:232:17:    got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:234:17: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:234:17:    expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:234:17:    got unsigned int [usertype] *
drivers/soc/fsl/qe/ucc_slow.c:238:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:238:9:    expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:238:9:    got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:239:9: warning: cast from restricted __be32
drivers/soc/fsl/qe/ucc_slow.c:239:9: warning: incorrect type in argument 1 (different base types)
drivers/soc/fsl/qe/ucc_slow.c:239:9:    expected unsigned int [usertype] val
drivers/soc/fsl/qe/ucc_slow.c:239:9:    got restricted __be32 [usertype]
drivers/soc/fsl/qe/ucc_slow.c:239:9: warning: cast from restricted __be32
drivers/soc/fsl/qe/ucc_slow.c:239:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:239:9:    expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:239:9:    got unsigned int [usertype] *
drivers/soc/fsl/qe/ucc_slow.c:242:26: warning: incorrect type in assignment (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:242:26:    expected struct qe_bd *rx_bd
drivers/soc/fsl/qe/ucc_slow.c:242:26:    got void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:245:17: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:245:17:    expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:245:17:    got unsigned int [usertype] *
drivers/soc/fsl/qe/ucc_slow.c:247:17: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:247:17:    expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:247:17:    got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:251:9: warning: cast from restricted __be32
drivers/soc/fsl/qe/ucc_slow.c:251:9: warning: incorrect type in argument 1 (different base types)
drivers/soc/fsl/qe/ucc_slow.c:251:9:    expected unsigned int [usertype] val
drivers/soc/fsl/qe/ucc_slow.c:251:9:    got restricted __be32 [usertype]
drivers/soc/fsl/qe/ucc_slow.c:251:9: warning: cast from restricted __be32
drivers/soc/fsl/qe/ucc_slow.c:251:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:251:9:    expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:251:9:    got unsigned int [usertype] *
drivers/soc/fsl/qe/ucc_slow.c:252:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:252:9:    expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:252:9:    got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:276:39: warning: mixing different enum types:
drivers/soc/fsl/qe/ucc_slow.c:276:39:    unsigned int enum ucc_slow_tx_oversampling_rate
drivers/soc/fsl/qe/ucc_slow.c:276:39:    unsigned int enum ucc_slow_rx_oversampling_rate
drivers/soc/fsl/qe/ucc_slow.c:296:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:296:9:    expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:296:9:    got restricted __be16 *
drivers/soc/fsl/qe/ucc_slow.c:297:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:297:9:    expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:297:9:    got restricted __be16 *

Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-03-24 19:09:40 -05:00
Li Yang
b1be4a2280 soc: fsl: qe: fix sparse warnings for ucc_fast.c
Fixes the following sparse warnings:

drivers/soc/fsl/qe/ucc_fast.c:218:22: warning: incorrect type in assignment (different base types)
drivers/soc/fsl/qe/ucc_fast.c:218:22:    expected unsigned int [noderef] [usertype] <asn:2> *p_ucce
drivers/soc/fsl/qe/ucc_fast.c:218:22:    got restricted __be32 [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_fast.c:219:22: warning: incorrect type in assignment (different base types)
drivers/soc/fsl/qe/ucc_fast.c:219:22:    expected unsigned int [noderef] [usertype] <asn:2> *p_uccm
drivers/soc/fsl/qe/ucc_fast.c:219:22:    got restricted __be32 [noderef] <asn:2> *

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
2020-03-24 19:02:23 -05:00
Dmitry Osipenko
860fbde438 cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
The driver's code is refactored in a way that will make it easy to
support Tegra30/114/124 SoCs by this unified driver later on. The
current functionality is equal to the old Tegra20 driver, only the
code's structure changed a tad. This is also a proper platform driver
now.

Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13 11:31:58 +01:00
Dmitry Osipenko
1f3e18ec95 ARM: tegra: Rename some of the newly exposed PM functions
Rename some of the recently exposed PM functions, prefixing them with
"tegra_pm_" in order to make the naming of the PM functions consistent.

Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13 11:23:08 +01:00
Dmitry Osipenko
7741868f38 ARM: tegra: Expose PM functions required for new cpuidle driver
The upcoming unified CPUIDLE driver will be added to the drivers/cpuidle/
directory and it will require all these exposed Tegra PM-core functions.

Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[treding@nvidia.com: fixup missing include rename]
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13 11:22:41 +01:00
Venkat Reddy Talla
04fac2412b soc/tegra: pmc: Add pins for Tegra194
Extend the Tegra194 IO pad table with additional information such as pin
names and 1.8/3.3 V settings to allow a table of voltage control pins to
generated from it. This is similar to what's done for older chips and is
needed to support high-speed modes for SDHCI where switching the pins to
1.8V or 3.3V is necessary.

Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13 10:53:10 +01:00
David S. Miller
1d34357931 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Minor overlapping changes, nothing serious.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 22:34:48 -07:00
Vidya Sagar
ee22d0c5e8 soc/tegra: bpmp: Update ABI header
Update the firmware header to support uninitialization of UPHY PLL
when the PCIe controller is operating in endpoint mode and host cuts
the PCIe reference clock.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
2020-03-11 10:20:19 +00:00
Vladimir Oltean
a8015ded89 net: mscc: ocelot: properly account for VLAN header length when setting MRU
What the driver writes into MAC_MAXLEN_CFG does not actually represent
VLAN_ETH_FRAME_LEN but instead ETH_FRAME_LEN + ETH_FCS_LEN. Yes they are
numerically equal, but the difference is important, as the switch treats
VLAN-tagged traffic specially and knows to increase the maximum accepted
frame size automatically. So it is always wrong to account for VLAN in
the MAC_MAXLEN_CFG register.

Unconditionally increase the maximum allowed frame size for
double-tagged traffic. Accounting for the additional length does not
mean that the other VLAN membership checks aren't performed, so there's
no harm done.

Also, stop abusing the MTU name for configuring the MRU. There is no
support for configuring the MRU on an interface at the moment.

Fixes: a556c76adc ("net: mscc: Add initial Ocelot switch support")
Fixes: fa914e9c4d ("net: mscc: ocelot: create a helper for changing the port MTU")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 18:58:17 -07:00
Vladimir Oltean
1cf3299b03 net: dsa: felix: Allow unknown unicast traffic towards the CPU port module
Compared to other DSA switches, in the Ocelot cores, the RX filtering is
a much more important concern.

Firstly, the primary use case for Ocelot is non-DSA, so there isn't any
secondary Ethernet MAC [the DSA master's one] to implicitly drop frames
having a DMAC we are not interested in.  So the switch driver itself
needs to install FDB entries towards the CPU port module (PGID_CPU) for
the MAC address of each switch port, in each VLAN installed on the port.
Every address that is not whitelisted is implicitly dropped. This is in
order to achieve a behavior similar to N standalone net devices.

Secondly, even in the secondary use case of DSA, such as illustrated by
Felix with the NPI port mode, that secondary Ethernet MAC is present,
but its RX filter is bypassed. This is because the DSA tags themselves
are placed before Ethernet, so the DMAC that the switch ports see is
not seen by the DSA master too (since it's shifter to the right).

So RX filtering is pretty important. A good RX filter won't bother the
CPU in case the switch port receives a frame that it's not interested
in, and there exists no other line of defense.

Ocelot is pretty strict when it comes to RX filtering: non-IP multicast
and broadcast traffic is allowed to go to the CPU port module, but
unknown unicast isn't. This means that traffic reception for any other
MAC addresses than the ones configured on each switch port net device
won't work. This includes use cases such as macvlan or bridging with a
non-Ocelot (so-called "foreign") interface. But this seems to be fine
for the scenarios that the Linux system embedded inside an Ocelot switch
is intended for - it is simply not interested in unknown unicast
traffic, as explained in Allan Nielsen's presentation [0].

On the other hand, the Felix DSA switch is integrated in more
general-purpose Linux systems, so it can't afford to drop that sort of
traffic in hardware, even if it will end up doing so later, in software.

Actually, unknown unicast means more for Felix than it does for Ocelot.
Felix doesn't attempt to perform the whitelisting of switch port MAC
addresses towards PGID_CPU at all, mainly because it is too complicated
to be feasible: while the MAC addresses are unique in Ocelot, by default
in DSA all ports are equal and inherited from the DSA master. This adds
into account the question of reference counting MAC addresses (delayed
ocelot_mact_forget), not to mention reference counting for the VLAN IDs
that those MAC addresses are installed in. This reference counting
should be done in the DSA core, and the fact that it wasn't needed so
far is due to the fact that the other DSA switches don't have the DSA
tag placed before Ethernet, so the DSA master is able to whitelist the
MAC addresses in hardware.

So this means that even regular traffic termination on a Felix switch
port happens through flooding (because neither Felix nor Ocelot learn
source MAC addresses from CPU-injected frames).

So far we've explained that whitelisting towards PGID_CPU:
- helps to reduce the likelihood of spamming the CPU with frames it
  won't process very far anyway
- is implemented in the ocelot driver
- is sufficient for the ocelot use cases
- is not feasible in DSA
- breaks use cases in DSA, in the current status (whitelisting enabled
  but no MAC address whitelisted)

So the proposed patch allows unknown unicast frames to be sent to the
CPU port module. This is done for the Felix DSA driver only, as Ocelot
seems to be happy without it.

[0]: https://www.youtube.com/watch?v=B1HhxEcU7Jg

Suggested-by: Allan W. Nielsen <allan.nielsen@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Allan W. Nielsen <allan.nielsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04 14:19:01 -08:00
Vladimir Oltean
69df578c5f net: mscc: ocelot: eliminate confusion between CPU and NPI port
Ocelot has the concept of a CPU port. The CPU port is represented in the
forwarding and the queueing system, but it is not a physical device. The
CPU port can either be accessed via register-based injection/extraction
(which is the case of Ocelot), via Frame-DMA (similar to the first one),
or "connected" to a physical Ethernet port (called NPI in the datasheet)
which is the case of the Felix DSA switch.

In Ocelot the CPU port is at index 11.
In Felix the CPU port is at index 6.

The CPU bit is treated special in the forwarding, as it is never cleared
from the forwarding port mask (once added to it). Other than that, it is
treated the same as a normal front port.

Both Felix and Ocelot should use the CPU port in the same way. This
means that Felix should not use the NPI port directly when forwarding to
the CPU, but instead use the CPU port.

This patch is fixing this such that Felix will use port 6 as its CPU
port, and just use the NPI port to carry the traffic.

Therefore, eliminate the "ocelot->cpu" variable which was holding the
index of the NPI port for Felix, and the index of the CPU port module
for Ocelot, so the variable was actually configuring different things
for different drivers and causing at least part of the confusion.

Also remove the "ocelot->num_cpu_ports" variable, which is the result of
another confusion. The 2 CPU ports mentioned in the datasheet are
because there are two frame extraction channels (register based or DMA
based). This is of no relevance to the driver at the moment, and
invisible to the analyzer module.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Suggested-by: Allan W. Nielsen <allan.nielsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04 14:19:00 -08:00
Vladimir Oltean
07d985eef0 net: dsa: felix: Wire up the ocelot cls_flower methods
Export the cls_flower methods from the ocelot driver and hook them up to
the DSA passthrough layer.

Tables for the VCAP IS2 parameters, as well as half key packing (field
offsets and lengths) need to be defined for the VSC9959 core, as they
are different from Ocelot, mainly due to the different port count.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03 18:57:49 -08:00
Vladimir Oltean
8551cdeb2a net: mscc: ocelot: parameterize the vcap_is2 properties
Remove the definitions for the VCAP IS2 table from ocelot_ace.c, since
it is specific to VSC7514.

The VSC9959 VCAP IS2 table supports more rules (1024 instead of 64) and
has a different width for the action (89 bits instead of 99).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03 18:57:49 -08:00
Vladimir Oltean
1ba8f6561a net: mscc: ocelot: remove port_pcs_init indirection for VSC7514
The Felix driver is now using its own PHYLINK instance, not calling into
ocelot_adjust_link. So the port_pcs_init function pointer is an
unnecessary indirection. Remove it.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Allan W. Nielsen <allan.nielsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03 18:57:42 -08:00
Vladimir Oltean
e0632940bc net: mscc: ocelot: don't rely on preprocessor for vcap key/action packing
The IGR_PORT_MASK key width is different between the 11-port VSC7514 and
the 6-port VSC9959 switches. And since IGR_PORT_MASK is one of the first
fields of a VCAP key entry, it means that all further field
offset/length pairs are shifted between the 2.

The ocelot driver performs packing of VCAP half keys with the help of
some preprocessor macros:

- A set of macros for defining the HKO (Half Key Offset) and HKL (Half
  Key Length) of each possible key field. The offset of each field is
  defined as the sum between the offset and the sum of the previous
  field.

- A set of accessors on top of vcap_key_set for shorter (aka less
  typing) access to the HKO and HKL of each key field.

Since the field offsets and lengths are different between switches,
defining them through the preprocessor isn't going to fly. So introduce
a structure holding (offset, length) pairs and instantiate it in
ocelot_board.c for VSC7514. In a future patch, a similar structure will
be instantiated in felix_vsc9959.c for NXP LS1028A.

The accessors also need to go. They are based on macro name
concatenation, which is horrible to understand and follow.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03 18:57:42 -08:00
Vladimir Oltean
a56d7a345d net: mscc: ocelot: simplify tc-flower offload structures
The ocelot tc-flower offload binds a second flow block callback (apart
from the one for matchall) just because it uses a different block
private structure (ocelot_port_private for matchall, ocelot_port_block
for flower).

But ocelot_port_block just appears to be boilerplate, and doesn't help
with anything in particular at all, it's just useless glue between the
(global!) struct ocelot_acl_block *block pointer, and a per-netdevice
struct ocelot_port_private *priv.

So let's just simplify that, and make struct ocelot_port_private be the
private structure for the block offload. This makes us able to use the
same flow callback as in the case of matchall.

This also reveals that the struct ocelot_acl_block *block is used rather
strangely, as mentioned above: it is defined globally, allocated at
probe time, and freed at unbind time. So just move the structure to the
main ocelot structure, which gives further opportunity for
simplification.

Also get rid of backpointers from struct ocelot_acl_block and struct
ocelot_ace_rule back to struct ocelot, by reworking the function
prototypes, where necessary, to use a more DSA-friendly "struct ocelot
*ocelot, int port" format.

And finally, remove the debugging prints that were added during
development, since they provide no useful information at this point.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Allan W. Nielsen <allan.nielsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03 18:57:29 -08:00
Youri Querry
9d98809711 soc: fsl: dpio: Adding QMAN multiple enqueue interface
Update of QMAN the interface to enqueue frame. We now support multiple
enqueue (qbman_swp_enqueue_multiple) and multiple enqueue with
a table of descriptor (qbman_swp_enqueue_multiple_desc).

Signed-off-by: Youri Querry <youri.querry_1@nxp.com>
Acked-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-02-19 18:06:16 -06:00
Maulik Shah
d5e205079c drivers: qcom: rpmh: remove rpmh_flush export
rpmh_flush() was exported with the idea that an external entity
operation during CPU idle would know when to flush the sleep and wake
TCS. Since, this is not the case when defining a power domain for the
RSC. Remove the function export and instead allow the function to be
called internally.

Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1580736940-6985-3-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-02-11 22:15:02 -08:00
Linus Torvalds
eab3540562 ARM: SoC-related driver updates
Various driver updates for platforms:
 
  - Nvidia: Fuse support for Tegra194, continued memory controller pieces
    for Tegra30
 
  - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC
 
  - NXP/FSL: i.MX8MP SoC driver pieces
 
  - TI Keystone: ring accelerator driver
 
  - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.
 
  - Xilinx ZynqMP: feature checking interface for firmware. Mailbox
    communication for power management
 
  - Overall support patch set for cpuidle on more complex hierarchies
    (PSCI-based)
 
 + Misc cleanups, refactorings of Marvell, TI, other platforms.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl4+lTYPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3nQcQAJm91+6hZbmMjlBySGS7ISjYvOcrI/hMgiOl
 uhhEP0Dcylvf9A9x3wcIbLwixe+2pvie9DQh2u5F80ShYimidtFi/2xCfuTb9fKu
 sxxKjrXWyVKhkpW0z+tedY08ftVhkwwcyD4m2C7uVl6AwTP7c367vFeU7XjF2APn
 drfgmgbjm8U3XbSyAqv+k6z6tyqaCnFM7vbPupSKHgHJ3mfByxOa+XyBN2RdgBbs
 0KrVfbXGv80zFIFrMPwaWG7G52bu7K68nVdgy44MpKdRZ6QTjhnR+kerFxHsYgV4
 bM55Fya52nTCSTGdKaQakDtKwbAUdCDTSkxgOHGcQoyFi0R/VaEUJtcysnvLbI6c
 +n/yFIzGyEdXcvIzfv2SoDYhogw19I6RR/M9K5Ni29eazkDVYx2z3rI+2QYeqCiF
 u7cq52gW6JLP0SI/9kuUrRFiR8v19Ixap7qokAxgqQwYB3NzT8a7WsYPkzdpDZGQ
 ETSDFMyBWT6UvBe/HWkQluBabbet53rG8BF0OHFrQuMK0u/ieKgSGuTB9XN2djEW
 PHMOMz2vhi+8XTfpkskhF2tTxlA/k4R6QwCdIMpIkMRVnVQCh1XdPr3Fi2NrgB+S
 kIXHD4vV6zLYh04zHyKewSPHAXWgraFpg2qKnvL5+KWMTnW6QH+RNjOt9xKDNXOd
 +iDXpOad
 =ONtb
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms:

   - Nvidia: Fuse support for Tegra194, continued memory controller
     pieces for Tegra30

   - NXP/FSL: Refactorings of QuickEngine drivers to support
     ARM/ARM64/PPC

   - NXP/FSL: i.MX8MP SoC driver pieces

   - TI Keystone: ring accelerator driver

   - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.

   - Xilinx ZynqMP: feature checking interface for firmware. Mailbox
     communication for power management

   - Overall support patch set for cpuidle on more complex hierarchies
     (PSCI-based)

  and misc cleanups, refactorings of Marvell, TI, other platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits)
  drivers: soc: xilinx: Use mailbox IPI callback
  dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox
  drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists
  MAINTAINERS: Add brcmstb PCIe controller entry
  soc/tegra: fuse: Unmap registers once they are not needed anymore
  soc/tegra: fuse: Correct straps' address for older Tegra124 device trees
  soc/tegra: fuse: Warn if straps are not ready
  soc/tegra: fuse: Cache values of straps and Chip ID registers
  memory: tegra30-emc: Correct error message for timed out auto calibration
  memory: tegra30-emc: Firm up hardware programming sequence
  memory: tegra30-emc: Firm up suspend/resume sequence
  soc/tegra: regulators: Do nothing if voltage is unchanged
  memory: tegra: Correct reset value of xusb_hostr
  soc/tegra: fuse: Add APB DMA dependency for Tegra20
  bus: tegra-aconnect: Remove PM_CLK dependency
  dt-bindings: mediatek: add MT6765 power dt-bindings
  soc: mediatek: cmdq: delete not used define
  memory: tegra: Add support for the Tegra194 memory controller
  memory: tegra: Only include support for enabled SoCs
  memory: tegra: Support DVFS on Tegra186 and later
  ...
2020-02-08 14:04:19 -08:00
David S. Miller
b3f7e3f23a Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net 2020-01-19 22:10:04 +01:00
Yash Shah
13cf4cf030 riscv: move sifive_l2_cache.h to include/soc
The commit 9209fb5189 ("riscv: move sifive_l2_cache.c to drivers/soc")
moves the sifive L2 cache driver to driver/soc. It did not move the
header file along with the driver. Therefore this patch moves the header
file to driver/soc

Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: updated to fix the include guard]
Fixes: 9209fb5189 ("riscv: move sifive_l2_cache.c to drivers/soc")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-12 10:12:44 -08:00
Vladimir Oltean
964ee5c82b net: mscc: ocelot: export ANA, DEV and QSYS registers to include/soc/mscc
Since the Felix DSA driver is implementing its own PHYLINK instance due
to SoC differences, it needs access to the few registers that are
common, mainly for flow control.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05 23:22:33 -08:00
Vladimir Oltean
ee50d07c9f net: mscc: ocelot: make phy_mode a member of the common struct ocelot_port
The Ocelot switchdev driver and the Felix DSA one need it for different
reasons. Felix (or at least the VSC9959 instantiation in NXP LS1028A) is
integrated with the traditional NXP Layerscape PCS design which does not
support runtime configuration of SerDes protocol. So it needs to
pre-validate the phy-mode from the device tree and prevent PHYLINK from
attempting to change it. For this, it needs to cache it in a private
variable.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05 23:22:33 -08:00
Rasmus Villemoes
c93c159aef soc: fsl: qe: avoid IS_ERR_VALUE in ucc_fast.c
When building this on a 64-bit platform gcc rightly warns that the
error checking is broken (-ENOMEM stored in an u32 does not compare
greater than (unsigned long)-MAX_ERRNO). Instead, change the
ucc_fast_[tr]x_virtual_fifo_base_offset members to s32 and use an
ordinary check-for-negative. Also, this avoids treating 0 as "this
cannot have been returned from qe_muram_alloc() so don't free it".

Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09 13:54:37 -06:00
Rasmus Villemoes
611780a6aa soc: fsl: qe: avoid IS_ERR_VALUE in ucc_slow.c
When trying to build this for a 64-bit platform, one gets warnings
from using IS_ERR_VALUE on something which is not sizeof(long).

Instead, change the various *_offset fields to store a signed integer,
and simply check for a negative return from qe_muram_alloc(). Since
qe_muram_free() now accepts and ignores a negative argument, we only
need to make sure these fields are initialized with -1, and we can
just unconditionally call qe_muram_free() in ucc_slow_free().

Note that the error case for us_pram_offset failed to set that field
to 0 (which, as noted earlier, is anyway a bogus sentinel value).

Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09 13:54:36 -06:00
Rasmus Villemoes
754f40e097 soc: fsl: qe: make cpm_muram_free() return void
Nobody uses the return value from cpm_muram_free, and functions that
free resources usually return void. One could imagine a use for a "how
much have I allocated" a la ksize(), but knowing how much one had
access to after the fact is useless.

Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09 13:54:36 -06:00
Rasmus Villemoes
800cd6fb76 soc: fsl: qe: change return type of cpm_muram_alloc() to s32
There are a number of problems with cpm_muram_alloc() and its
callers. Most callers assign the return value to some variable and
then use IS_ERR_VALUE to check for allocation failure. However, when
that variable is not sizeof(long), this leads to warnings - and it is
indeed broken to do e.g.

  u32 foo = cpm_muram_alloc();
  if (IS_ERR_VALUE(foo))

on a 64-bit platform, since the condition

  foo >= (unsigned long)-ENOMEM

is tautologically false. There are also callers that ignore the
possibility of error, and then there are those that check for error by
comparing the return value to 0...

One could fix that by changing all callers to store the return value
temporarily in an "unsigned long" and test that. However, use of
IS_ERR_VALUE() is error-prone and should be restricted to things which
are inherently long-sized (stuff in pt_regs etc.). Instead, let's aim
for changing to the standard kernel style

  int foo = cpm_muram_alloc();
  if (foo < 0)
    deal_with_it()
  some->where = foo;

Changing the return type from unsigned long to s32 (aka signed int)
doesn't change the value that gets stored into any of the callers'
variables except if the caller was storing the result in a u64 _and_
the allocation failed, so in itself this patch should be a no-op.

Another problem with cpm_muram_alloc() is that it can certainly
validly return 0 - and except if some cpm_muram_alloc_fixed() call
interferes, the very first cpm_muram_alloc() call will return just
that. But that shows that both ucc_slow_free() and ucc_fast_free() are
buggy, since they assume that a value of 0 means "that field was never
allocated". We'll later change cpm_muram_free() to accept (and ignore)
a negative offset, so callers can use a sentinel of -1 instead of 0
and just unconditionally call cpm_muram_free().

Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09 13:54:35 -06:00
Rasmus Villemoes
c1c80cde7f soc/fsl/qe/qe.h: update include path for cpm.h
asm/cpm.h under arch/powerpc is now just a wrapper for including
soc/fsl/cpm.h. In order to make the qe.h header usable on other
architectures, use the latter path directly.

Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09 13:54:34 -06:00
Rasmus Villemoes
d5b4a762b7 soc: fsl: move cpm.h from powerpc/include/asm to include/soc/fsl
Some drivers, e.g. ucc_uart, need definitions from cpm.h. In order to
allow building those drivers for non-ppc based SOCs, move the header
to include/soc/fsl. For now, leave a trivial wrapper at the old
location so drivers can be updated one by one.

Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09 13:54:34 -06:00
Rasmus Villemoes
9dab15b1a0 soc: fsl: qe: merge qe_ic.h headers into qe_ic.c
The public qe_ic.h header is no longer included by anything but
qe_ic.c. Merge both headers into qe_ic.c, and drop the unused
constants.

Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09 13:54:33 -06:00
Rasmus Villemoes
5bd2022234 soc: fsl: qe: make qe_ic_get_{low,high}_irq static
These are only called from within qe_ic.c, so make them static.

Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09 13:54:32 -06:00
Rasmus Villemoes
d7c2878cfc soc: fsl: qe: remove unused qe_ic_set_* functions
There are no current callers of these functions, and they use the
ppc-specific virq_to_hw(). So removing them gets us one step closer to
building QE support for ARM.

If the functionality is ever actually needed, the code can be dug out
of git and then adapted to work on all architectures, but for future
reference please note that I believe qe_ic_set_priority is buggy: The
"priority < 4" should be "priority <= 4", and in the else branch 24
should be replaced by 28, at least if I'm reading the data sheet right.

Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09 13:54:32 -06:00
Rasmus Villemoes
a36742d13a soc: fsl: qe: move qe_ic_cascade_* functions to qe_ic.c
These functions are only ever called through a function pointer, and
therefore it makes no sense for them to be "static inline" - gcc has
no choice but to emit a copy in each translation unit that takes the
address of one of these. Since they are now only referenced from
qe_ic.c, just make them local to that file.

Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09 13:54:32 -06:00
Rasmus Villemoes
4e0e161d3c soc: fsl: qe: move calls of qe_ic_init out of arch/powerpc/
Having to call qe_ic_init() from platform-specific code makes it
awkward to allow building the QE drivers for ARM. It's also a needless
duplication of code, and slightly error-prone: Instead of the caller
needing to know the details of whether the QUICC Engine High and QUICC
Engine Low are actually the same interrupt (see e.g. the machine_is()
in mpc85xx_mds_qeic_init), just let the init function choose the
appropriate handlers after it has parsed the DT and figured it out. If
the two interrupts are distinct, use separate handlers, otherwise use
the handler which first checks the CHIVEC register (for the high
priority interrupts), then the CIVEC.

All existing callers pass 0 for flags, so continue to do that from the
new single caller. Later cleanups will remove that argument
from qe_ic_init and simplify the body, as well as make qe_ic_init into
a proper init function for an IRQCHIP_DECLARE, eliminating the need to
manually look up the fsl,qe-ic node.

Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09 13:54:31 -06:00
Rasmus Villemoes
273e66721e soc: fsl: qe: use qe_ic_cascade_{low, high}_mpic also on 83xx
The *_ipic and *_mpic handlers are almost identical - the only
difference is that the latter end with an unconditional
chip->irq_eoi() call. Since IPIC does not have ->irq_eoi, we can
reduce some code duplication by calling irq_eoi conditionally.

This is similar to what is already done in mpc8xxx_gpio_irq_cascade().

This leaves the functions slightly misnamed, but that will be fixed in
a subsequent patch.

Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09 13:54:30 -06:00
Rasmus Villemoes
6ac9b61786 soc: fsl: qe: introduce qe_io{read,write}* wrappers
The QUICC engine drivers use the powerpc-specific out_be32() etc. In
order to allow those drivers to build for other architectures, those
must be replaced by iowrite32be(). However, on powerpc, out_be32() is
a simple inline function while iowrite32be() is out-of-line. So in
order not to introduce a performance regression on powerpc when making
the drivers work on other architectures, introduce qe_io* helpers.

Also define the qe_{clr,set,clrset}bits* helpers in terms of these new
macros.

Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09 13:54:29 -06:00
Rasmus Villemoes
d9d95bcad3 soc: fsl: qe: rename qe_(clr/set/clrset)bit* helpers
Make it clear that these operate on big-endian registers (i.e. use the
iowrite*be primitives) before we introduce more uses of them and allow
the QE drivers to be built for platforms other than ppc32.

Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-12-09 13:54:29 -06:00
Linus Torvalds
7ada90eb9c drm msm + fixes for 5.5-rc1
msm-next:
 - OCMEM support for a3xx and a4xx GPUs.
 - a510 support + display support
 
 core:
 - mst payload deletion fix
 
 i915:
 - uapi alignment fix
 - fix for power usage regression due to security fixes
 - change default preemption timeout to 640ms from 100ms
 - EHL voltage level display fixes
 - TGL DGL PHY fix
 - gvt - MI_ATOMIC cmd parser fix, CFL non-priv warning
 - CI spotted deadlock fix
 - EHL port D programming fix
 
 amdgpu:
 - VRAM lost fixes on BACO for CI/VI
 - navi14 DC fixes
 - misc SR-IOV, gfx10 fixes
 - XGMI fixes for arcturus
 - SRIOV fixes
 
 amdkfd:
 - KFD on ppc64le enabled
 - page table optimisations
 
 radeon:
 - fix for r1xx/2xx register checker.
 
 tegra:
 - displayport regression fixes
 - DMA API regression fixes
 
 mgag200:
 - fix devices that can't scanout except at 0 addr
 
 omap:
 - fix dma_addr refcounting
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJd6cqnAAoJEAx081l5xIa+YR0P/A0LkilEbSnF/k7zKDjm0HN8
 JGsf9ZfQRGA2y8URoLRtNdFjZfyuTSpiDSxsbDI0ShBhRimGHyCSxAJXO42vp8q3
 jE57jBoaTSiGtagSO3nxrc1vQP7CfUpaggC2ilKSmcVvTrlqip6iPx7s2PoNyQYc
 GRVUhkcylnZK5UrMiE8Yz/iNcy3Mh0X8bJQKXMEYxpW2KA3SL4qxuRlYIxXEoMyB
 4MlWEV09wHTduf1uYuKdusHjILgR5EiVOdmbvpM92obqZOTokt5/S20TEdhFqiy0
 0IHxuEkgVx+trXzGFbmqgh2I7BZvZIbKVCSnBT4AXAvUEJ99kGTdEP0I6uOp2lsC
 1DCm+7/hcI8BlwmwC9N6ogUwoAzKn7DNc1urcet/0QVbnZLZlueUK/6fSgUNnUYe
 miOeMNBmfHr83b75MpnNxYVoyz5S+/DFbtUplYKqxgjDYfiWWceSSE47NB+IHAiI
 RVpz3AxGpKaw4/w5l2q8VuToWZxdO85TNjgVCTmKfwlYjIbEuveWpZNFqO/GHMm9
 x50f4ZYVOjU2TEPnLQNTIJOgv71JrTpoAdFzPVwCeWUf4h4Y4lVLgTLvdG1JLcw+
 k9BrA5z2R0kjzPtabRhS6WfSjpgSbY3DgY9hfi+HIUmKvZq4fdtAbBlp1oGSXJ9N
 zkVrs9eE6Ahkcndi6ZV9
 =3cs2
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drm

Pull more drm updates from Dave Airlie:
 "Rob pointed out I missed his pull request for msm-next, it's been in
  next for a while outside of my tree so shouldn't cause any unexpected
  issues, it has some OCMEM support in drivers/soc that is acked by
  other maintainers as it's outside my tree.

  Otherwise it's a usual fixes pull, i915, amdgpu, the main ones, with
  some tegra, omap, mgag200 and one core fix.

  Summary:

  msm-next:
   - OCMEM support for a3xx and a4xx GPUs.
   - a510 support + display support

  core:
   - mst payload deletion fix

  i915:
   - uapi alignment fix
   - fix for power usage regression due to security fixes
   - change default preemption timeout to 640ms from 100ms
   - EHL voltage level display fixes
   - TGL DGL PHY fix
   - gvt - MI_ATOMIC cmd parser fix, CFL non-priv warning
   - CI spotted deadlock fix
   - EHL port D programming fix

  amdgpu:
   - VRAM lost fixes on BACO for CI/VI
   - navi14 DC fixes
   - misc SR-IOV, gfx10 fixes
   - XGMI fixes for arcturus
   - SRIOV fixes

  amdkfd:
   - KFD on ppc64le enabled
   - page table optimisations

  radeon:
   - fix for r1xx/2xx register checker.

  tegra:
   - displayport regression fixes
   - DMA API regression fixes

  mgag200:
   - fix devices that can't scanout except at 0 addr

  omap:
   - fix dma_addr refcounting"

* tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drm: (100 commits)
  drm/dp_mst: Correct the bug in drm_dp_update_payload_part1()
  drm/omap: fix dma_addr refcounting
  drm/tegra: Run hub cleanup on ->remove()
  drm/tegra: sor: Make the +5V HDMI supply optional
  drm/tegra: Silence expected errors on IOMMU attach
  drm/tegra: vic: Export module device table
  drm/tegra: sor: Implement system suspend/resume
  drm/tegra: Use proper IOVA address for cursor image
  drm/tegra: gem: Remove premature import restrictions
  drm/tegra: gem: Properly pin imported buffers
  drm/tegra: hub: Remove bogus connection mutex check
  ia64: agp: Replace empty define with do while
  agp: Add bridge parameter documentation
  agp: remove unused variable num_segments
  agp: move AGPGART_MINOR to include/linux/miscdevice.h
  agp: remove unused variable size in agp_generic_create_gatt_table
  drm/dp_mst: Fix build on systems with STACKTRACE_SUPPORT=n
  drm/radeon: fix r1xx/r2xx register checker for POT textures
  drm/amdgpu: fix GFX10 missing CSIB set(v3)
  drm/amdgpu: should stop GFX ring in hw_fini
  ...
2019-12-06 10:28:09 -08:00
Linus Torvalds
ec939e4c94 ARM: SoC-related driver updates
Various driver updates for platforms:
 
  - A larger set of work on Tegra 2/3 around memory controller and
  regulator features, some fuse cleanups, etc..
 
  - MMP platform drivers, in particular for USB PHY, and other smaller
  additions.
 
  - Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
  and ASV (adaptive voltage), allowing the platform to run at more
  optimal operating points.
 
  - Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
 
  - Clock/reset control driver for TI/OMAP
 
  - Meson-A1 reset controller support
 
  - Qualcomm sdm845 and sda845 SoC IDs for socinfo
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl3pORkPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3FK0P/0EG4lK+il7nE3pd9yIGUjlcYuumIjoxvyC9
 9ef202POJLIO3yMlsNyGFR+aOknFO/GtGvDkDFhTtlsGCL40tVzVsyo7ZQo+8mXD
 abr+H74NmRXImc+SISYR8X1CD6vEi3oi/no1y5dRzknlBikfsdSLKXJSMYBJ2A6t
 DNLwu0h1IZhPk7XQQsxaElG/a9HN8eueMdP20J1IlhOh0GiOwm+rbsLSZNbA/W9m
 53XhFs3Ag39SDE0BfXsS+XOWTE7FheZsZk2XQrOwYm9PnxjpIWH7FE2sYsk6uUIc
 Pa1b6wB5zlRnxvVHP0m3GXhbTUJDYDK3oybHffI4Mzd0cyZQHC92LhUXFrlTxkaf
 6kyhJOTdd5KMlZ2LS7jkwLqb30ieXBPKAREjdbRt6hpvu5P6G+bZQphTEeNAZC61
 XnX8mQ/XeoHdoGY5MvS8ht6a1qDF29ebA0/02seicThGK6tS9Qsju6Zo0sg9H1NH
 weK6jDuzLq5jpv/LB1apigrDSx+zddRzrwkwy85hR5aWOQhG0xjOoFBProbTS0to
 wR46zCEkbGZv4uc0gRuIdp0NR/lguqgDWPeoLluoTqmcpKS6N3RyxD0bWzlvgDFA
 fpYxVNKavHneWjfZ7U5RbYXD6jycJcuLaCOs16nrtUbMgJ9pqclLIaZXn7ZTRIuT
 RW6NgfZV
 =dk7w
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Olof Johansson:
 "Various driver updates for platforms:

   - A larger set of work on Tegra 2/3 around memory controller and
     regulator features, some fuse cleanups, etc..

   - MMP platform drivers, in particular for USB PHY, and other smaller
     additions.

   - Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
     and ASV (adaptive voltage), allowing the platform to run at more
     optimal operating points.

   - Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas

   - Clock/reset control driver for TI/OMAP

   - Meson-A1 reset controller support

   - Qualcomm sdm845 and sda845 SoC IDs for socinfo"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits)
  firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
  soc: fsl: add RCPM driver
  dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
  memory: tegra: Consolidate registers definition into common header
  memory: tegra: Ensure timing control debug features are disabled
  memory: tegra: Introduce Tegra30 EMC driver
  memory: tegra: Do not handle error from wait_for_completion_timeout()
  memory: tegra: Increase handshake timeout on Tegra20
  memory: tegra: Print a brief info message about EMC timings
  memory: tegra: Pre-configure debug register on Tegra20
  memory: tegra: Include io.h instead of iopoll.h
  memory: tegra: Adapt for Tegra20 clock driver changes
  memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
  memory: tegra: Add gr2d and gr3d to DRM IOMMU group
  memory: tegra: Set DMA mask based on supported address bits
  soc: at91: Add Atmel SFR SN (Serial Number) support
  memory: atmel-ebi: switch to SPDX license identifiers
  memory: atmel-ebi: move NUM_CS definition inside EBI driver
  soc: mediatek: Refactor bus protection control
  soc: mediatek: Refactor sram control
  ...
2019-12-05 11:43:31 -08:00
Yangbo Lu
b049da1338 net: mscc: ocelot: use skb queue instead of skbs list
Convert to use skb queue instead of the list of skbs.
The skb queue could provide protection with lock.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-27 10:53:37 -08:00
Yangbo Lu
400928bf92 net: mscc: ocelot: convert to use ocelot_port_add_txtstamp_skb()
Convert to use ocelot_port_add_txtstamp_skb() for adding skbs which
require TX timestamp into list. Export it so that DSA Felix driver
could reuse it too.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21 14:39:02 -08:00
Yangbo Lu
e23a7b3e8d net: mscc: ocelot: convert to use ocelot_get_txtstamp()
The method getting TX timestamp by reading timestamp FIFO and
matching skbs list is common for DSA Felix driver too.
So move code out of ocelot_board.c, convert to use
ocelot_get_txtstamp() function and export it.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21 14:39:02 -08:00
Yangbo Lu
f145922ddc net: mscc: ocelot: export ocelot_hwstamp_get/set functions
Export ocelot_hwstamp_get/set functions so that DSA driver
is able to reuse them.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21 14:39:02 -08:00
Vladimir Oltean
a030dfe194 net: mscc: ocelot: publish ocelot_sys.h to include/soc/mscc
The Felix DSA driver needs to write to SYS_RAM_INIT_RAM_INIT for its own
chip initialization process.

Also update the MAINTAINERS file such that the headers exported by the
ocelot driver are under the same maintainers' umbrella as the driver
itself.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-15 12:32:16 -08:00
Vladimir Oltean
5e25636502 net: mscc: ocelot: publish structure definitions to include/soc/mscc/ocelot.h
We will be registering another switch driver based on ocelot, which
lives under drivers/net/dsa.

Make sure the Felix DSA front-end has the necessary abstractions to
implement a new Ocelot driver instantiation. This includes the function
prototypes for implementing DSA callbacks.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-15 12:32:16 -08:00
Dmitry Osipenko
e34212c75a memory: tegra: Introduce Tegra30 EMC driver
Introduce driver for the External Memory Controller (EMC) found on Tegra30
chips, it controls the external DRAM on the board. The purpose of this
driver is to program memory timing for external memory on the EMC clock
rate change.

Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11 14:55:27 +01:00
Madalin Bucur
e06eea555b dpaa_eth: register a device link for the qman portal used
Before this change, unbinding the QMan portals did not trigger a
corresponding unbinding of the dpaa_eth making use of it; the first
QMan portal related operation issued afterwards crashed the kernel.
The device link ensures the dpaa_eth dependency upon the qman portal
used is honoured at the QMan portal removal.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31 12:13:34 -07:00
Madalin Bucur
a2d00f3db7 soc: fsl: qbman: allow registering a device link for the portal user
Introduce the API required to make sure that the devices that use
the QMan portal are unbound when the portal is unbound.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31 12:13:34 -07:00
Brian Masney
bfcb7e1555 soc: qcom: ocmem: add missing includes
The kbuild bot reported the following compiler errors when compiling on
MIPS with CONFIG_QCOM_OCMEM disabled:

  In file included from <command-line>:0:0:
  >> include/soc/qcom/ocmem.h:43:49: warning: 'struct device' declared
     inside parameter list will not be visible outside of this
     definition or declaration
      static inline struct ocmem *of_get_ocmem(struct device *dev)
                                                      ^~~~~~
     include/soc/qcom/ocmem.h: In function 'of_get_ocmem':
  >> include/soc/qcom/ocmem.h:45:9: error: implicit declaration of
     function 'ERR_PTR' [-Werror=implicit-function-declaration]
       return ERR_PTR(-ENODEV);
              ^~~~~~~
  >> include/soc/qcom/ocmem.h:45:18: error: 'ENODEV' undeclared (first
     use in this function)
       return ERR_PTR(-ENODEV);

Add the proper includes to fix the compiler errors.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Reported-by: kbuild test robot <lkp@intel.com>
Tested-by: Gabriel Francisco <frc.gabriel@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07 08:19:43 -07:00
Brian Masney
88c1e9404f soc: qcom: add OCMEM driver
The OCMEM driver handles allocation and configuration of the On Chip
MEMory that is present on some Snapdragon SoCs. Devices which have
OCMEM do not have GMEM inside the GPU core, so the GPU must instead
use OCMEM to be functional. Since the GPU is currently the only OCMEM
user with an upstream driver, this is just a minimal implementation
sufficient for statically allocating to the GPU it's chunk of OCMEM.

This driver currently does not read the gmu-sram node that is described
in the device tree bindings. The starting memory address of the GPU's
reserved memory region is hardcoded to zero to match what the hardware
expects. The driver can be updated to read the reserved memory regions
from device tree once other users of OCMEM are added upstream.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Co-developed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Gabriel Francisco <frc.gabrielgmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07 08:17:33 -07:00
Linus Torvalds
6cfae0c26b Char/Misc driver patches for 5.4-rc1
Here is the big char/misc driver pull request for 5.4-rc1.
 
 As has been happening in previous releases, more and more individual
 driver subsystem trees are ending up in here.  Now if that is good or
 bad I can't tell, but hopefully it makes your life easier as it's more
 of an aggregation of trees together to one merge point for you.
 
 Anyway, lots of stuff in here:
 	- habanalabs driver updates
 	- thunderbolt driver updates
 	- misc driver updates
 	- coresight and intel_th hwtracing driver updates
 	- fpga driver updates
 	- extcon driver updates
 	- some dma driver updates
 	- char driver updates
 	- android binder driver updates
 	- nvmem driver updates
 	- phy driver updates
 	- parport driver fixes
 	- pcmcia driver fix
 	- uio driver updates
 	- w1 driver updates
 	- configfs fixes
 	- other assorted driver updates
 
 All of these have been in linux-next for a long time with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXYIT1g8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ym9lwCgrHZlMMvfYNVm6GQ5ge58JJsVTL4AoNatTcL4
 hfVMA6pCHWBjV65xVSf6
 =Tijw
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver pull request for 5.4-rc1.

  As has been happening in previous releases, more and more individual
  driver subsystem trees are ending up in here. Now if that is good or
  bad I can't tell, but hopefully it makes your life easier as it's more
  of an aggregation of trees together to one merge point for you.

  Anyway, lots of stuff in here:
     - habanalabs driver updates
     - thunderbolt driver updates
     - misc driver updates
     - coresight and intel_th hwtracing driver updates
     - fpga driver updates
     - extcon driver updates
     - some dma driver updates
     - char driver updates
     - android binder driver updates
     - nvmem driver updates
     - phy driver updates
     - parport driver fixes
     - pcmcia driver fix
     - uio driver updates
     - w1 driver updates
     - configfs fixes
     - other assorted driver updates

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits)
  misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation
  habanalabs: correctly cast variable to __le32
  habanalabs: show correct id in error print
  habanalabs: stop using the acronym KMD
  habanalabs: display card name as sensors header
  habanalabs: add uapi to retrieve aggregate H/W events
  habanalabs: add uapi to retrieve device utilization
  habanalabs: Make the Coresight timestamp perpetual
  habanalabs: explicitly set the queue-id enumerated numbers
  habanalabs: print to kernel log when reset is finished
  habanalabs: replace __le32_to_cpu with le32_to_cpu
  habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64
  habanalabs: Handle HW_IP_INFO if device disabled or in reset
  habanalabs: Expose devices after initialization is done
  habanalabs: improve security in Debug IOCTL
  habanalabs: use default structure for user input in Debug IOCTL
  habanalabs: Add descriptive name to PSOC app status register
  habanalabs: Add descriptive names to PSOC scratch-pad registers
  habanalabs: create two char devices per ASIC
  habanalabs: change device_setup_cdev() to be more generic
  ...
2019-09-18 11:14:31 -07:00
Joerg Roedel
e95adb9add Merge branches 'arm/omap', 'arm/exynos', 'arm/smmu', 'arm/mediatek', 'arm/qcom', 'arm/renesas', 'x86/amd', 'x86/vt-d' and 'core' into next 2019-09-11 12:39:19 +02:00
Greg Kroah-Hartman
4a79ce748f interconnect patches for 5.4
Here are the interconnect driver updates for the 5.4-rc1 merge window.
 
 - New feature is the path tagging support that helps with grouping and
 aggregating the bandwidth requests into separate buckets based on a tag.
 - The first user of the path tagging is the Qualcomm sdm845 driver that
 now implements support for wake/sleep sets. This allows consumer drivers
 to express their bandwidth needs for the different CPU power states.
 - New interconnect driver for the qcs404 platforms and a driver that
 communicates bandwidth requests with remote processor over shared memory.
 - Cleanups and fixes.
 
 Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJdX/5XAAoJEIDQzArG2BZjK88QAKqqfxwnvGwRGxRuDM2k2nnw
 B41wgEkrOg0ArIDIBEyiI/QVV8u7kch6d8oJQpy27xTmXNKH4hTUVA6GUlzVLd5e
 Kdr9COUNjXrxUZ834cEonE3bJYosudgLH3qWOJ2nM3nEHipeJcFB1Z/+QmVwZPs4
 P7RM6T04VqMlXxq1TIeqQs7T+nt6m+Bo+gJ/EfTUtK7EtP9np5cY1ufSnSJahJLX
 IfFJsya8e22xaQKV6Z3tR4LhR8u7q32mgaj2EVC1qL3H33M73UBcov/bGGpTrlqC
 dpElzdexML0iFxL/YxLkYmMoqx6fxCA2+in0Jy9/OBs7S82qWmejdRerEvHKvnWY
 J5g7NwL6sBvCn0To3W6FGXfvlC+4cFsT+GMQWD9q5EakkH1bzFBmn/k2QdAynOYn
 9bjVw1i9Y+AsdK9eBxj+4DUZCGBPgSEwKpPdwYsPg2dt6Cwdk6AURLdWTZGI/UtD
 YzKe0n/ilrwHCF/lTaSuQpMaZTbbjw0mgKVbD0G4GVtT6JhF/AOhvmE0vD7SBs6h
 sqnjwfFOnzjOjYhbHLPXD8FhR33siyzrB7pAioMhsDxGkprdJD9QTKjNT0Hv+0MW
 GPNOxvRtlzDiGhFfvQQ+gbyJ+t3NXbQzS5XzMhu+39c6iRclr7Tp5R7nwN5tNc3D
 XSrY2BkLuspsnV2iCO76
 =TVC/
 -----END PGP SIGNATURE-----

Merge tag 'icc-5.4-rc1' of https://git.linaro.org/people/georgi.djakov/linux into char-misc-next

Georgi writes:

interconnect patches for 5.4

Here are the interconnect driver updates for the 5.4-rc1 merge window.

- New feature is the path tagging support that helps with grouping and
aggregating the bandwidth requests into separate buckets based on a tag.
- The first user of the path tagging is the Qualcomm sdm845 driver that
now implements support for wake/sleep sets. This allows consumer drivers
to express their bandwidth needs for the different CPU power states.
- New interconnect driver for the qcs404 platforms and a driver that
communicates bandwidth requests with remote processor over shared memory.
- Cleanups and fixes.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>

* tag 'icc-5.4-rc1' of https://git.linaro.org/people/georgi.djakov/linux:
  drivers: qcom: Add BCM vote macro to header
  interconnect: qcom: remove COMPILE_TEST from CONFIG_INTERCONNECT_QCOM_QCS404
  interconnect: qcom: Add QCS404 interconnect provider driver
  interconnect: qcom: Add interconnect RPM over SMD driver
  dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings
  interconnect: qcom: Add tagging and wake/sleep support for sdm845
  interconnect: Add pre_aggregate() callback
  interconnect: Add support for path tags
2019-09-03 21:47:37 +02:00
Yong Wu
1ee9feb2c9 iommu/mediatek: Clean up struct mtk_smi_iommu
Remove the "struct mtk_smi_iommu" to simplify the code since it has only
one item in it right now.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-30 15:57:27 +02:00
Yong Wu
ec2da07ca1 memory: mtk-smi: Get rid of need_larbid
The "mediatek,larb-id" has already been parsed in MTK IOMMU driver.
It's no need to parse it again in SMI driver. Only clean some codes.
This patch is fit for all the current mt2701, mt2712, mt7623, mt8173
and mt8183.

After this patch, the "mediatek,larb-id" only be needed for mt2712
which have 2 M4Us. In the other SoCs, we can get the larb-id from M4U
in which the larbs in the "mediatek,larbs" always are ordered.

Correspondingly, the larb_nr in the "struct mtk_smi_iommu" could also
be deleted.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-08-30 15:57:27 +02:00
Linus Torvalds
6525771f58 ARC updates for 5.3-rc7
- Support for Edge Triggered IRQs in ARC IDU intc
 
  - other fixes here and there
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdZWFxAAoJEGnX8d3iisJe1/QP/1QlB6bDp36ONuc0wgtvyZhS
 /KDfgwyLK89WiH/lc2AgPL6BkFaOBSqpNe9PS8IdjRscGMJFaXnfifKBl2eX/sM3
 4nkiIjAb9Fl4dLdaPs/51p+wvHlkdD9pzI5SYJl2IeNCZRNjjixBlaF8fezONtlu
 2yuzmikeggcT7NZGnZ5IQGj6CWRm7Drb5J4mfmZu3HJ+BJOnXZpdza3q3WduT3DC
 6tUA/xtUXq8sGpylXL2MgA34SbgjBDmxW8Kv32sQp6mipGJwq4jF4+n8rxF/znCe
 6ILiqOwp7CjEHmpYTn2cxMC5FTP0BuvnLh/ECEFKUWgIH4/A3zy/RJOKhbZ0P0rV
 +vraRvdjOA2/0P6Y1A+cGGYP2c3HwmSgHmtXwd/QRfesX2/Y7jhMlEOXZ9H2K6CC
 zTqobUWQ4tFprz1P0H6p1h7Z/tJv/q4TNMZR5tcQyjwT6i7Sw+ReffTnwpPMr92V
 GAZu6sahsJCOqRqk0MfaZVa54r+UlE8bbapGZo+7fZ9+UVrxLKgWwfnYbe/6eSHX
 osddo3zoLuBrgq2gt/ZMseeQRdRYeH8p/3jgnEws2G/uen7GjAw9m0c3Yrs+ibVS
 oNp3DNk8wkzgrLgC7xXhBkwyok85SEoCfZoQg96DXo365G0YyHZyHCI2HzIAP4oy
 wtRcqnsQgEtvV1s7RiTU
 =CJKr
 -----END PGP SIGNATURE-----

Merge tag 'arc-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC updates from Vineet Gupta:

 - support for Edge Triggered IRQs in ARC IDU intc

 - other fixes here and there

* tag 'arc-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  arc: prefer __section from compiler_attributes.h
  dt-bindings: IDU-intc: Add support for edge-triggered interrupts
  dt-bindings: IDU-intc: Clean up documentation
  ARCv2: IDU-intc: Add support for edge-triggered interrupts
  ARC: unwind: Mark expected switch fall-throughs
  ARC: [plat-hsdk]: allow to switch between AXI DMAC port configurations
  ARC: fix typo in setup_dma_ops log message
  ARCv2: entry: early return from exception need not clear U & DE bits
2019-08-27 10:50:27 -07:00
Mischa Jonker
174ae4e96e ARCv2: IDU-intc: Add support for edge-triggered interrupts
This adds support for an optional extra interrupt cell to specify edge
vs level triggered. It is backward compatible with dts files with only
one cell, and will default to level-triggered in such a case.

Note that I had to make a change to idu_irq_set_affinity as well, as
this function was setting the interrupt type to "level" unconditionally,
since this was the only type supported previously.

Signed-off-by: Mischa Jonker <mischa.jonker@synopsys.com>
Reviewed-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-08-26 22:34:59 +05:30
Jordan Crouse
6311b6521b drivers: qcom: Add BCM vote macro to header
The macro to generate a Bus Controller Manager (BCM) TCS command is used
by the interconnect driver but might also be interesting to other
drivers that need to construct TCS commands for sub processors so move
it out of the sdm845 specific file and into the header.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-08-20 10:09:56 +03:00
Jonathan Corbet
48ffc3d12b Merge branch 'pdf_fixes_v1' of https://git.linuxtv.org/mchehab/experimental into mauro
Bring in a set of post-thrashup fixes from Mauro.
2019-07-22 13:51:20 -06:00
Linus Torvalds
8362fd64f0 ARM: SoC-related driver updates
Various driver updates for platforms and a couple of the small driver
 subsystems we merge through our tree:
 
  - A driver for SCU (system control) on NXP i.MX8QXP
  - Qualcomm Always-on Subsystem messaging driver (AOSS QMP)
  - Qualcomm PM support for MSM8998
  - Support for a newer version of DRAM PHY driver for Broadcom (DPFE)
  - Reset controller support for Bitmain BM1880
  - TI SCI (System Control Interface) support for CPU control on AM654
    processors
  - More TI sysc refactoring and rework
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl0yK3YPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3WdUQAJEFRzY4+8VfsUspKmGwzHsrk7t1038JUEDE
 VL3yYlvSGeHg5a58AI5PCR5ZCsyPK7Yw9cAcYexd0frFR7BCwKWrjqem0Lb5ovdK
 CYM517DRtYPSBMF08Xw4pbZlT0yg65F1e9cf6BlUpkUZ6lJn4gUy8Y4BE6Aw/zuF
 QKtQNs6Q8BUZqS3uoOpJ/PY4JiUmLPQPO4Lry7Lud8Z7qgArCC326paC3wwqjLoC
 TpoMqb6izt7Vzo4BtTo5TUCyiEFZDlb/thhDySVlYRE7DQJusHBvRO9qgjI2ahOo
 1/935q1fJO7S6+Yvc8DIzrD/DrIUOvOshi31F/J6iWKkQkTUxtQwsVReZKaiOfSD
 fYxNVCgTcMS6ailKQSMQ0SYgXDa2gWdV3tS9XU8qML3tnDthi1nDmZks0QAAnFPS
 bXRcWGtgqeQJ+QJ7yyKrsD9POeaq3Hc5/f1DN34H//Cyn0ip/fD6fkLCMIfUDwmu
 TmO2Mnj6/fG/iBK+ToF+DaJ0/u3RiV2MC2vCE+0m3cVI9jtq9iA1y3UlmoaKUhhC
 t9znA+u8/Jc5S2zNQriI2Ja5q8nKfihL7Jf68ENvGzLc7YuAqP6yx1LMg1g6Wshc
 nLT+kHOF6DCUC3W7a8VuNyaxCwVtTbNTti+nvQVOmV6eaGiD5vzpXkHBWMbOJ7Lh
 YOBwGyb4
 =ek+j
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms and a couple of the small driver
  subsystems we merge through our tree:

   - A driver for SCU (system control) on NXP i.MX8QXP

   - Qualcomm Always-on Subsystem messaging driver (AOSS QMP)

   - Qualcomm PM support for MSM8998

   - Support for a newer version of DRAM PHY driver for Broadcom (DPFE)

   - Reset controller support for Bitmain BM1880

   - TI SCI (System Control Interface) support for CPU control on AM654
     processors

   - More TI sysc refactoring and rework"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (84 commits)
  reset: remove redundant null check on pointer dev
  soc: rockchip: work around clang warning
  dt-bindings: reset: imx7: Fix the spelling of 'indices'
  soc: imx: Add i.MX8MN SoC driver support
  soc: aspeed: lpc-ctrl: Fix probe error handling
  soc: qcom: geni: Add support for ACPI
  firmware: ti_sci: Fix gcc unused-but-set-variable warning
  firmware: ti_sci: Use the correct style for SPDX License Identifier
  soc: imx8: Use existing of_root directly
  soc: imx8: Fix potential kernel dump in error path
  firmware/psci: psci_checker: Park kthreads before stopping them
  memory: move jedec_ddr.h from include/memory to drivers/memory/
  memory: move jedec_ddr_data.c from lib/ to drivers/memory/
  MAINTAINERS: Remove myself as qcom maintainer
  soc: aspeed: lpc-ctrl: make parameter optional
  soc: qcom: apr: Don't use reg for domain id
  soc: qcom: fix QCOM_AOSS_QMP dependency and build errors
  memory: tegra: Fix -Wunused-const-variable
  firmware: tegra: Early resume BPMP
  soc/tegra: Select pinctrl for Tegra194
  ...
2019-07-19 17:13:56 -07:00
Mauro Carvalho Chehab
4d2e26a38f docs: powerpc: convert docs to ReST and rename to *.rst
Convert docs to ReST and add them to the arch-specific
book.

The conversion here was trivial, as almost every file there
was already using an elegant format close to ReST standard.

The changes were mostly to mark literal blocks and add a few
missing section title identifiers.

One note with regards to "--": on Sphinx, this can't be used
to identify a list, as it will format it badly. This can be
used, however, to identify a long hyphen - and "---" is an
even longer one.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> # cxl
2019-07-17 06:57:51 -03:00
Thomas Gleixner
d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Olof Johansson
1126037393 NXP/FSL SoC driver updates for v5.3
DPAA2 Console driver
 - Add driver to export two char devices to dump logs for MC and
   AIOP
 
 DPAA2 DPIO driver
 - Add support for memory backed QBMan portals
 - Increase the timeout period to prevent false error
 - Add APIs to retrieve QBMan portal probing status
 
 DPAA Qman driver
 - Only make liodn fixup on powerpc SoCs with PAMU iommu
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEhb3UXAyxp6UQ0v6khtxQDvusFVQFAlzjAJMACgkQhtxQDvus
 FVQzBg/+Jmi8XNWxxIT+2MOKnEKZMiWwo9X+g4e3ZpwtoLujb9PaIAu3bY9Svhpj
 w2v6xUE8fNH1rlRcRQLLxW+v7ziruCx4iM2D6BKw1xgf8eu0ob4R1b+0bTgfSa9S
 xmHrNwgaTers7dB57ehYOq6PlExz0/wjU5hkPjhWMUkvA6RNAxDiZbexF0q21CYE
 T3dNA2v6sBuWqbtl6dzx+N884P7gLTuHMDJfcdFPTu+4I5YGJBnG6ZoM6YSLP5Pf
 i/sh57E7T3Zo4T0ysDDIndf1IssTOmmSxy+eTV1oCWBBSdD3m/zzb8Qw5ohMyGOI
 AMhrkMYOGKpwShCbtzKvfz4DYQhTj9YjTqO+G+EMuVEiPIvN+jkevsdub4+0q7BL
 q3Lo1T36JQ4RriI6m/csZIWju1LRNW0TQw8vLOAoOaLCOWEpNgGPxYFmqFiDqoNN
 8PKC3BkH9BRJo8s9phMqWiqFb7RYegiGUsCrfIDU4x2uyyWAW2uAYQxFOfW+Mc+h
 7/IonbApaS7uspn+CZFGp4TtXcbakbNoWgETf+b7zKJGrDqgWi2ErLHWxt1J3n54
 waJnGlMlrafGdXqBVZNvuAvqmHD0BNzkck4c3ht+z4M96fw0K38EgWVgKfayElaK
 EiX/55HmejQ6aoqNvrv7NZrg/2o5Vcly7C9RtPj3aHMbIdyiQ7k=
 =C+f6
 -----END PGP SIGNATURE-----

Merge tag 'soc-fsl-next-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers

NXP/FSL SoC driver updates for v5.3

DPAA2 Console driver
- Add driver to export two char devices to dump logs for MC and
  AIOP

DPAA2 DPIO driver
- Add support for memory backed QBMan portals
- Increase the timeout period to prevent false error
- Add APIs to retrieve QBMan portal probing status

DPAA Qman driver
- Only make liodn fixup on powerpc SoCs with PAMU iommu

* tag 'soc-fsl-next-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: qbman_portals: add APIs to retrieve the probing status
  soc: fsl: qman: fixup liodns only on ppc targets
  soc: fsl: dpio: Add support for memory backed QBMan portals
  bus: mc-bus: Add support for mapping shareable portals
  soc: fsl: dpio: Increase timeout for QBMan Management Commands
  soc: fsl: add DPAA2 console support
  Documentation: DT: Add entry for DPAA2 console
  soc: fsl: guts: Add definition for LX2160A

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-17 04:38:06 -07:00
Thomas Gleixner
46fe777164 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 399
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not see http www gnu org
  licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 33 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531081038.745679586@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:12 +02:00
Thomas Gleixner
2025cf9e19 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 263 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:36:37 +02:00
Thomas Gleixner
9c92ab6191 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
Based on 1 normalized pattern(s):

  this software is licensed under the terms of the gnu general public
  license version 2 as published by the free software foundation and
  may be copied distributed and modified under those terms this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 285 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:36:37 +02:00
Thomas Gleixner
9952f6918d treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not see http www gnu org
  licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 228 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:29:52 -07:00
Thomas Gleixner
1802d0beec treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:41 -07:00
Thomas Gleixner
2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00
Laurentiu Tudor
5d1d046e28 soc: fsl: qbman_portals: add APIs to retrieve the probing status
Add a couple of new APIs to check the probing status of the required
cpu bound qman and bman portals:
 'int bman_portals_probed()' and 'int qman_portals_probed()'.
They return the following values.
 *  1 if qman/bman portals were all probed correctly
 *  0 if qman/bman portals were not yet probed
 * -1 if probing of qman/bman portals failed
Portals are considered successful probed if no error occurred during
the probing of any of the portals and if enough portals were probed
to have one available for each cpu.
The error handling paths were slightly rearranged in order to fit this
new functionality without being too intrusive.
Drivers that use qman/bman portal driver services are required to use
these APIs before calling any functions exported by these drivers or
otherwise they will crash the kernel.
First user will be the dpaa1 ethernet driver, coming in a subsequent
patch.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-05-20 14:28:16 -05:00
Linus Torvalds
a13f950ef1 Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource updates from Ingo Molnar:
 "Misc clocksource/clockevent driver updates that came in a bit late but
  are ready for v5.2"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  misc: atmel_tclib: Do not probe already used TCBs
  clocksource/drivers/timer-atmel-tcb: Convert tc_clksrc_suspend|resume() to static
  clocksource/drivers/tcb_clksrc: Rename the file for consistency
  clocksource/drivers/timer-atmel-pit: Rework Kconfig option
  clocksource/drivers/tcb_clksrc: Move Kconfig option
  ARM: at91: Implement clocksource selection
  clocksource/drivers/tcb_clksrc: Use tcb as sched_clock
  clocksource/drivers/tcb_clksrc: Stop depending on atmel_tclib
  ARM: at91: move SoC specific definitions to SoC folder
  clocksource/drivers/timer-milbeaut: Cleanup common register accesses
  clocksource/drivers/timer-milbeaut: Add shutdown function
  clocksource/drivers/timer-milbeaut: Fix to enable one-shot timer
  clocksource/drivers/tegra: Rework for compensation of suspend time
  clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804
  clocksource/drivers/sun4i: Add a compatible for suniv
  dt-bindings: timer: Add Allwinner suniv timer
2019-05-19 11:11:20 -07:00
Linus Torvalds
4dbf09fea6 This pull request contains the following changes for MTD:
MTD core changes:
 - New AFS partition parser
 - Update MAINTAINERS entry
 - Use of fall-throughs markers
 
 NAND core changes:
 - Support having the bad block markers in either the first, second or
   last page of a block. The combination of all three location is now
   possible.
 - Constification of NAND_OP_PARSER(_PATTERN) elements.
 - Generic NAND DT bindings changed to yaml format (can be used to
   check the proposed bindings. First platform to be fully supported:
   sunxi.
 - Stopped using several legacy hooks.
 - Preparation to use the generic NAND layer with the addition of
   several helpers and the removal of the struct nand_chip from generic
   functions.
 - Kconfig cleanup to prepare the introduction of external ECC engines
   support.
 - Fallthrough comments.
 - Introduction of the SPI-mem dirmap API for SPI-NAND devices.
 
 Raw NAND controller drivers changes:
 - nandsim:
   * Switch to ->exec-op().
 - meson:
   * Misc cleanups and fixes.
   * New OOB layout.
 - Sunxi:
   * A23/A33 NAND DMA support.
 - Ingenic:
   * Full reorganization and cleanup.
   * Clear separation between NAND controller and ECC engine.
   * Support JZ4740 an JZ4725B.
 - Denali:
   * Clear controller/chip separation.
   * ->exec_op() migration.
   * Various cleanups.
 - fsl_elbc:
   * Enable software ECC support.
 - Atmel:
   * Sam9x60 support.
 - GPMI:
   * Introduce the GPMI_IS_MXS() macro.
 - Various trivial/spelling/coding style fixes.
 
 SPI NOR core changes:
 - Print all JEDEC ID bytes on error
 - Fix comment of spi_nor_find_best_erase_type()
 - Add region locking flags for s25fl512s
 
 SPI NOR controller drivers changes:
 - intel-spi:
   * Avoid crossing 4K address boundary on read/write
   * Add support for Intel Comet Lake SPI serial flash
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAlzYiU4WHHJpY2hhcmRA
 c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wX1HEACay8s/mUEWcLO3JKWy6KiC3756
 1CGB3p5b621kKP6ooPWvV7UAv1Q2IKkLIwKaLE5W5FuKW9bVnN6H/yejVT8vYPK9
 /5AbcqbdNKfrnYBnfv3SHH8jSYo6HjwwNsF7OcR/yiXvk/JUFX+VJQdR01HEzz+Z
 TWzkm4n5+vat5pJSGBs7JwRBlatuiCHul7Lz2dZYkF/ZdGIQgL5ftOr1goLsr88+
 Hxn7Wmp3eBVZbQMf83BD7wf/Nv+oycToKBqklMZqMBEgK5mT6WDkT65HG4XMfzMz
 0CcPReMHlTZVqJHHZFgTSXVPJJHu8Nl4qmJIAaf1hnmvx7yFW6LD0C1zKpu6uwRm
 +qVpe/fTDArLCEwLouLND6Y9MC7kkERkDE3jwcwSQ/PZcE3kdHKwIhmJ/19utI8k
 zk9pWGAWvtuoY1b+dNFxT4YcUxrHOWSxYcUZHcZvQHQr7Bvxskg92P1fOU0wlgC/
 tXRtXUNCB5YsUU5x8Ph6+786dsCMcwCDoQQzwegecrbc6sK7n3KSYAcoNfv5ATwI
 C+Myoawul/XsxQvUyYbDIr8T4Yyda1BLs92XHxg1Di3kTC2m0OZL8sWJboQ7I/CI
 GkiJm5hFvzwniE+yrqE4n4jnCkoP5Y4kRtX70VDK3pIVDZFPs93lgYaYTFcfp93G
 scfn1MoI/bE7jDzpbA==
 =HXap
 -----END PGP SIGNATURE-----

Merge tag 'mtd/for-5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Richard Weinberger:
 "MTD core changes:
   - New AFS partition parser
   - Update MAINTAINERS entry
   - Use of fall-throughs markers

  NAND core changes:
   - Support having the bad block markers in either the first, second or
     last page of a block. The combination of all three location is now
     possible.
   - Constification of NAND_OP_PARSER(_PATTERN) elements.
   - Generic NAND DT bindings changed to yaml format (can be used to
     check the proposed bindings. First platform to be fully supported:
     sunxi.
   - Stopped using several legacy hooks.
   - Preparation to use the generic NAND layer with the addition of
     several helpers and the removal of the struct nand_chip from
     generic functions.
   - Kconfig cleanup to prepare the introduction of external ECC engines
     support.
   - Fallthrough comments.
   - Introduction of the SPI-mem dirmap API for SPI-NAND devices.

  Raw NAND controller drivers changes:
   - nandsim:
      - Switch to ->exec-op().
   - meson:
      - Misc cleanups and fixes.
      - New OOB layout.
   - Sunxi:
      - A23/A33 NAND DMA support.
   - Ingenic:
      - Full reorganization and cleanup.
      - Clear separation between NAND controller and ECC engine.
      - Support JZ4740 an JZ4725B.
   - Denali:
      - Clear controller/chip separation.
      - ->exec_op() migration.
      - Various cleanups.
   - fsl_elbc:
      - Enable software ECC support.
   - Atmel:
      - Sam9x60 support.
   - GPMI:
      - Introduce the GPMI_IS_MXS() macro.
   - Various trivial/spelling/coding style fixes.

  SPI NOR core changes:
   - Print all JEDEC ID bytes on error
   - Fix comment of spi_nor_find_best_erase_type()
   - Add region locking flags for s25fl512s

  SPI NOR controller drivers changes:
   - intel-spi:
      - Avoid crossing 4K address boundary on read/write
      - Add support for Intel Comet Lake SPI serial flash"

* tag 'mtd/for-5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (120 commits)
  mtd: part: fix incorrect format specifier for an unsigned long long
  mtd: lpddr_cmds: Mark expected switch fall-through
  mtd: phram: Mark expected switch fall-throughs
  mtd: cfi_cmdset_0002: Mark expected switch fall-throughs
  mtd: cfi_util: mark expected switch fall-throughs
  MAINTAINERS: MTD Git repository is hosted on kernel.org
  MAINTAINERS: Update jffs2 entry
  mtd: afs: add v2 partition parsing
  mtd: afs: factor the IIS read into partition parser
  mtd: afs: factor footer parsing into the v1 part parsing
  mtd: factor out v1 partition parsing
  mtd: afs: simplify partition detection
  mtd: afs: simplify partition parsing
  mtd: partitions: Add OF support to AFS partitions
  mtd: partitions: Add AFS partitions DT bindings
  mtd: afs: Move AFS partition parser to parsers subdir
  mtd: maps: Make uclinux_ram_map static
  mtd: maps: Allow MTD_PHYSMAP with MTD_RAM
  MAINTAINERS: Add myself as MTD maintainer
  MAINTAINERS: Remove my name from the MTD and NAND entries
  ...
2019-05-12 17:57:52 -04:00
Alexandre Belloni
c2c9136b70 ARM: at91: move SoC specific definitions to SoC folder
Move linux/atmel_tc.h to the SoC specific folder include/soc/at91.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-05-02 21:55:58 +02:00
Enric Balletbo i Serra
9173c5ceb0 PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters to TF-A.
Trusted Firmware-A (TF-A) for rk3399 implements a SiP call to get the
on-die termination (ODT) and auto power down parameters from kernel,
this patch adds the functionality to do this. Also, if DDR clock
frequency is lower than the on-die termination (ODT) disable frequency
this driver should disable the DDR ODT.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Gaël PORTAY <gael.portay@collabora.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-04-16 09:29:18 +09:00
Enric Balletbo i Serra
adfe3b7660 PM / devfreq: rockchip-dfi: Move GRF definitions to a common place.
Some rk3399 GRF (Generic Register Files) definitions can be used for
different drivers. Move these definitions to a common include so we
don't need to duplicate these definitions.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Gaël PORTAY <gael.portay@collabora.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2019-04-16 09:29:18 +09:00
Tudor Ambarus
b309df2422 ARM: at91: add sam9x60 SFR definitions
Keep generic names, as there are no conflicts with previous
SFR definitions.

While touching bits, update AT91_OHCIICR_USB_SUSPEND to use
GENMASK, replace unused AT91_OHCIICR_SUSPEND_A/B/C with a more
generic macro, align values on tab-width.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-21 16:44:57 +01:00
Linus Torvalds
bb97be23db IOMMU Updates for Linux v5.1
Including:
 
 	- A big cleanup and optimization patch-set for the
 	  Tegra GART driver
 
 	- Documentation updates and fixes for the IOMMU-API
 
 	- Support for page request in Intel VT-d scalable mode
 
 	- Intel VT-d dma_[un]map_resource() support
 
 	- Updates to the ATS enabling code for PCI (acked by Bjorn) and
 	  Intel VT-d to align with the latest version of the ATS spec
 
 	- Relaxed IRQ source checking in the Intel VT-d driver for some
 	  aliased devices, needed for future devices which send IRQ
 	  messages from more than on request-ID
 
 	- IRQ remapping driver for Hyper-V
 
 	- Patches to make generic IOVA and IO-Page-Table code usable
 	  outside of the IOMMU code
 
 	- Various other small fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAlyCNlIACgkQK/BELZcB
 GuNDiRAAscgYj0BdqpZVUNHl4PySR12QJpS1myl/OC4HEbdB/EOh+bYT4Q1vptCU
 GNK6Gt9SVfcbtWrLiGfcP9ODXmbqZ6AIOIbHKv9cvw1mnyYAtVvT/kck7B/W5jEr
 /aP/5RTO7XcqscWO44zBkrtLFupegtpQFB0jXYTJYTrwQoNKRqCUqfetZGzMkXjL
 x/h7kFTTIRcVP8RFcOeAMwC6EieaI8z8HN976Gu7xSV8g0VJqoNsBN8jbUuBh5AN
 oPyd9nl1KBcIQEC1HsbN8I5wIhTh1sJ2UDqFHAgtlnO59zWHORuFUUt6SXbC9UqJ
 okJTzFp9Dh2BqmFPXxBTxAf3j+eJP2XPpDI9Ask6SytEPhgw39fdlOOn2MWfSFoW
 TaBJ4ww/r98GzVxCP7Up98xFZuHGDICL3/M7Mk3mRac/lgbNRbtfcBa5NV4fyQhY
 184t656Zm/9gdWgGAvYQtApr6/iI+wRMLkIwuw63wqH09yfbDcpTOo6DEQE3B5KR
 4H1qSIiVGVVZlWQateR6N32ZmY4dWzpnL2b8CfsdBytzHHFb/c3dPnZB8fxx9mwF
 onyvjg9nkIiv7mdcN4Ox2WXrAExTeSftyPajN0WWawNJU3uPTBgNrqNHyWSkiaN4
 dAvEepfGuFQGz2Fj03Pv7OqY8veyRezErVRLwiMJRNyy7pi6Wng=
 =cKsD
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - A big cleanup and optimization patch-set for the Tegra GART driver

 - Documentation updates and fixes for the IOMMU-API

 - Support for page request in Intel VT-d scalable mode

 - Intel VT-d dma_[un]map_resource() support

 - Updates to the ATS enabling code for PCI (acked by Bjorn) and Intel
   VT-d to align with the latest version of the ATS spec

 - Relaxed IRQ source checking in the Intel VT-d driver for some aliased
   devices, needed for future devices which send IRQ messages from more
   than on request-ID

 - IRQ remapping driver for Hyper-V

 - Patches to make generic IOVA and IO-Page-Table code usable outside of
   the IOMMU code

 - Various other small fixes and cleanups

* tag 'iommu-updates-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits)
  iommu/vt-d: Get domain ID before clear pasid entry
  iommu/vt-d: Fix NULL pointer reference in intel_svm_bind_mm()
  iommu/vt-d: Set context field after value initialized
  iommu/vt-d: Disable ATS support on untrusted devices
  iommu/mediatek: Fix semicolon code style issue
  MAINTAINERS: Add Hyper-V IOMMU driver into Hyper-V CORE AND DRIVERS scope
  iommu/hyper-v: Add Hyper-V stub IOMMU driver
  x86/Hyper-V: Set x2apic destination mode to physical when x2apic is available
  PCI/ATS: Add inline to pci_prg_resp_pasid_required()
  iommu/vt-d: Check identity map for hot-added devices
  iommu: Fix IOMMU debugfs fallout
  iommu: Document iommu_ops.is_attach_deferred()
  iommu: Document iommu_ops.iotlb_sync_map()
  iommu/vt-d: Enable ATS only if the device uses page aligned address.
  PCI/ATS: Add pci_ats_page_aligned() interface
  iommu/vt-d: Fix PRI/PASID dependency issue.
  PCI/ATS: Add pci_prg_resp_pasid_required() interface.
  iommu/vt-d: Allow interrupts from the entire bus for aliased devices
  iommu/vt-d: Add helper to set an IRTE to verify only the bus number
  iommu: Fix flush_tlb_all typo
  ...
2019-03-10 12:29:52 -07:00
Arnd Bergmann
187b4ac7df This pull request contains Broadcom ARM/ARM64/MIPS based SoCs changes
for 5.1, please pull the following:
 
 - Stefan updates the BCM2835 SoC driver with downstream properties and
   uses that to implement a reboot notifier to tell the VC4 firmware when
   Linux on the ARM CPU is rebooting
 
 - Eric adds a proper power domain driver for the BCM283x SoCs and
   updates a bunch of drivers to have a better and clearer Device Tree
   definition to support power domains/breaking up of functionality. This
   requires converting the existing watchdog driver into a MFD and then
   breaking up the functionality into separate drivers and finally
   updating the DTS files to leverage the power domains information.
 
 - Wei provides a fix for making a symbol static
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAlxV0IYACgkQh9CWnEQH
 BwQIHA//TL12EfHws6C64EKspqsg9NE5/+K3HRRJbgwtuBQ/n6oYBMyJx+6x6Nwc
 7QjuCkZ/VWKxy0Fn+ToGnX0JgrQL5kND3Cm0d8cyZ0VJ6juppizyAa1YkFplShSr
 l0XlYaJo1HrB3hBd/+YbGZnLp9flbii5d3MIcy8ZoWmN7zLeHnQbHaf8jcbJC+Iw
 Mal8ojk2ru0rMimMQieTiPzWwiec08wtSIYs2590rOVWFyhGIn/KmHqpG6iYjdwj
 oQbr86R0jMPCb/g3SXRttxW8wFbtYdmILdkzhOaEd4JyJEwUCNDciM3E04OyE9VN
 fNMc1l0zh7dfyo9bFRpgS6AAxYQVj3led+B1NGtpnjDPybVWU10gipGdgFt9UPRE
 pJnS1LcPbAJ1FdbcYFU0TsiViWLZehm2cbc4rPYvqKp1Y+82FJZTYyu0GmBOUwB6
 jpM5ZVvET8k3nw6ImeE3jjT3kBfF31u552+iO4RQvKHRm/GBMtyTDrFZVUwgqMFE
 NEKnj3/VLSCxP3dnQImw1ro2493piZNdlBEs6mAugFUGqcb+40KOtOOpWiGMFH7h
 BZN0kj128ryG/YCVKDOnZSbYRLhpxc1VcVYJ3rYJgn8mrFFmNo/fjDgaRogrJN/s
 LmCiSIqsmuy8f36/IWd+aHk6ex5yskJe7x5M/7tlmz03oXg1viQ=
 =t5+u
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux into arm/drivers

This pull request contains Broadcom ARM/ARM64/MIPS based SoCs changes
for 5.1, please pull the following:

- Stefan updates the BCM2835 SoC driver with downstream properties and
  uses that to implement a reboot notifier to tell the VC4 firmware when
  Linux on the ARM CPU is rebooting

- Eric adds a proper power domain driver for the BCM283x SoCs and
  updates a bunch of drivers to have a better and clearer Device Tree
  definition to support power domains/breaking up of functionality. This
  requires converting the existing watchdog driver into a MFD and then
  breaking up the functionality into separate drivers and finally
  updating the DTS files to leverage the power domains information.

- Wei provides a fix for making a symbol static

* tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux:
  ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware.
  ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block. (v4)
  soc: bcm: bcm2835-pm: Make local symbol static
  soc: bcm: Make PM driver default for BCM2835
  soc: bcm: bcm2835-pm: Add support for power domains under a new binding.
  bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.
  dt-bindings: soc: Add a new binding for the BCM2835 PM node. (v4)
  firmware: raspberrypi: notify VC4 firmware of a reboot
  soc: bcm2835: sync firmware properties with downstream

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15 18:01:17 +01:00
Arnd Bergmann
a21c3f1795 soc/tegra: Changes for v5.1-rc1
This contains a couple of miscellaneous fixes for minor issues and a
 largish rework of the PMC driver to make it work on systems where the
 PMC has been locked down and can only be accessed from secure firmware.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlxdmF8THHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zodlTD/44v+tiZRB+6P6XafKvwBEruq1INqab
 5vTj7OOhmL2WPonruTUaze6bWqpV84gaqorVfR8JYvWL6nT+JGVvEnQwBTgwMqlL
 PYmPc93PlvieBJMQGmKjLYypLWFfaihjIkdAgosVKkFhHcP4SqKBhtq1Gs+1nFaC
 6uWdz+9S+ad/JPiYnoBHC6DoeXBDM8izpRLlsqPPAZkfzAcH7vTXbKoXN+VOeB/l
 wvD5wlG90LwcoSoFlQsBEcEdklBGPO90ItJFJiqnjrHsxoHVzYSRfdy72/hXuTsp
 5p/L5OWjcMG9DP5cF0HbmWetqEgTOLoRseyXuZZN3O3XHdkj37IRXEbSugHI5pi4
 Oybm01TPvhyprNXjCDM6vxf3f0mlh3sPoHXRyM8KJuMkg5vb1L43Vs9BYCkKUMaO
 I/nR5EUXb3R5/PvumL6LEiZVvjtpPWXL4swmbRbKoKd2K9kgFxGoYYbbbdDVZNim
 KWGbo9LWL2BHMXi0exN+8XWE3lpdKQJWlWADpXhbZltEcq6oJCWqPe9glrAXl877
 jd552NrRL9wiZikI+iwWpIMEkX4DLdxlZLw5r5kjInqsyo6H/N9kpRZMvDVo3VIi
 d1o0gc2Y1wJbhkE1TXSYhZG9nbqKFPvT7V5aBbI6rYdNA3AgxwY4Rq65Ex0a3KGV
 WFWxanWAqhn9Vw==
 =C9+u
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-5.1-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

soc/tegra: Changes for v5.1-rc1

This contains a couple of miscellaneous fixes for minor issues and a
largish rework of the PMC driver to make it work on systems where the
PMC has been locked down and can only be accessed from secure firmware.

* tag 'tegra-for-5.1-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: pmc: Support systems where PMC is marked secure
  soc/tegra: pmc: Explicitly initialize all fields
  soc/tegra: pmc: Make alignment consistent
  soc/tegra: pmc: Pass struct tegra_pmc * where possible
  soc/tegra: pmc: Make tegra_powergate_is_powered() a local function
  soc/tegra: pmc: Add missing kerneldoc
  soc/tegra: pmc: Sort includes alphabetically
  soc/tegra: pmc: Use TEGRA186_ prefix for GPIO names
  soc/tegra: fuse: Fix typo in tegra210_init_speedo_data
  soc/tegra: fuse: Fix illegal free of IO base address

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15 17:24:45 +01:00
Arnd Bergmann
f73e22d621 firmware: tegra: Changes for v5.1-rc1
These changes add support for BPMP on Tegra210.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlxdmJ4THHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoUNjEACJz0nXjTDHmlw/kWrOyVDK2B0Jmvno
 toVi0CvJxER6itaVPHnxayQBl/a76owF+h4HbXjuvD2fAj8vfhjNYiwed5NxvMGO
 lbP4Q6MhKoGzqIiZIubWNEQXLNK9gRrPULc1GuTuVKwIUPhUwKFgtHkFi6balVR0
 lpnNEU1V070LPbW1I4oxG6fdntJO+KMVoBWcPfCsnMQmEZOG/CqQhbYRPKojDsaO
 bb5FC3epffYBPIfJyvJy4XrGX6VOD4gC5KDhnDyIe4Hby4PsTzQGKcnp2b4OVssG
 nRON9X72o1i4uOdnUNkJnd6UGOL9Xn8zU9y2al6hRnx04+Sp1MHVSOwxI5HgkK7H
 PtFJe4u639MbsP6J1RLfKMpbLHdOEU7xE26MaQz7CdHd57L11szRgv3HcdsuCpmd
 a53djDTR0B2U9FzKI8ohp/cGr2l4Nc6Wlz2iVqxwTxyqXhE8NToIc56/gBQsIBbe
 qotxZumjjjseaQAHlykyaPG1DcRPz71Z+FXnFyG7soncO0ksbIO42b1Ms2jz+v7D
 ukHN193NLPfPB7EZCAsVnD+f1lIekrV+uWkTM9JoMgLkbxGSYKZS43hXO2QSa8Y4
 H3eDOGjV2PFL74Lzv2rW7dtMiM5dx5ewie/pX7J+aIOwnBlN65Pexs7zm0NREjtQ
 1qrmUTtiDFnZng==
 =8HHq
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-5.1-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

firmware: tegra: Changes for v5.1-rc1

These changes add support for BPMP on Tegra210.

* tag 'tegra-for-5.1-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  firmware/tegra: Enable Tegra186 BPMP support on Tegra194
  firmware: tegra: Conditionally support SoC generations
  firmware: tegra: bpmp-tegra186: Remove unused includes
  firmware: tegra: add bpmp driver for Tegra210
  firmware: tegra: Refactor BPMP driver
  firmware: tegra: Reword messaging terminology

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15 17:23:25 +01:00
Timo Alho
139251fc22 firmware: tegra: add bpmp driver for Tegra210
This patch adds driver for Tegra210 BPMP firmware.

The BPMP is a specific processor in Tegra210 chip, which runs firmware
for assisting in entering deep low power states (suspend to ram), and
offloading DRAM memory clock scaling on some platforms.

Based on work by Sivaram Nair <sivaramn@nvidia.com>

Signed-off-by: Timo Alho <talho@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 15:58:47 +01:00
Timo Alho
cdfa358b24 firmware: tegra: Refactor BPMP driver
Split BPMP driver into common and chip specific parts to facilitate
adding support for previous and future Tegra chips that are using BPMP
as co-processor.

Signed-off-by: Timo Alho <talho@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 15:58:47 +01:00
Jon Hunter
d32dde2c5a soc/tegra: pmc: Make tegra_powergate_is_powered() a local function
Now there are no more external users of tegra_powergate_is_powered(),
make this a local function.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 14:17:49 +01:00
Dmitry Osipenko
ce2785a75d iommu/tegra: gart: Integrate with Memory Controller driver
The device-tree binding has been changed. There is no separate GART device
anymore, it is squashed into the Memory Controller. Integrate GART module
with the MC in a way it is done for the SMMU on Tegra30+.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-01-16 13:54:12 +01:00
Dmitry Osipenko
96efa118c0 memory: tegra: Adapt to Tegra20 device-tree binding changes
The tegra20-mc device-tree binding has been changed, GART has been
squashed into Memory Controller and now the clock property is mandatory
for Tegra20, the DT compatible has been changed as well. Adapt driver to
the DT changes.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-01-16 13:54:11 +01:00
Ioana Ciocoi Radulescu
8a533a7de2 soc: fsl: dpio: Change bpid type to u16
In all QBMan registers, the buffer pool id field is two bytes long.
The low level qbman APIs reflect this, but the high level DPIO ones
use u32. Modify them in order to avoid implicit downcasts.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-01-11 15:06:54 -06:00
Ioana Ciornei
47441f7f73 soc: fsl: dpio: add a device_link at dpaa2_io_service_register
Automatically add a device link between the actual device requesting the
dpaa2_io_service_register and the underlying dpaa2_io used. This link
will ensure that when a DPIO device, which is indirectly used by other
devices, is unbound any consumer devices will be also unbound from their
drivers.

For example, any DPNI, bound to the dpaa2-eth driver, which is using
DPIO devices will be unbound before its supplier device.

Also, add a new parameter to the dpaa2_io_service_[de]register functions
to specify the requesting device (ie the consumer).

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-01-11 15:06:54 -06:00
Ioana Ciornei
cf9ff75d15 soc: fsl: dpio: store a backpointer to the device backing the dpaa2_io
Add a new field in the dpaa2_io structure to hold a backpointer to the
actual DPIO device.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-01-11 15:06:54 -06:00
Stefan Wahren
c6275e4b12 soc: bcm2835: sync firmware properties with downstream
Add latest firmware property tags from the latest Raspberry Pi downstream
kernel. This is needed to use the reboot notify in the following
commit.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
2019-01-09 16:34:46 +01:00
Ioana Ciornei
991e873223 soc: fsl: dpio: use a cpumask to identify which cpus are unused
The current implementation of the dpio driver uses a static next_cpu
variable to keep track of the index of the next cpu available. This
approach does not handle well unbinding and binding dpio devices in a
random order. For example, unbinding a dpio and then binding it again
with the driver, will generate the below error:

$ echo dpio.5 > /sys/bus/fsl-mc/drivers/fsl_mc_dpio/unbind
$ echo dpio.5 > /sys/bus/fsl-mc/drivers/fsl_mc_dpio/bind
[  103.946380] fsl_mc_dpio dpio.5: probe failed. Number of DPIOs exceeds
NR_CPUS.
[  103.955157] fsl_mc_dpio dpio.5: fsl_mc_driver_probe failed: -34
-bash: echo: write error: No such device

Fix this error by keeping a global cpumask of unused cpus that will be
updated at every dpaa2_dpio_[probe,remove].

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-01-08 14:15:37 -06:00
Linus Torvalds
d36377c6eb ARM: SoC driver updates
Misc driver updates for platforms, many of them power related.
 
  - Rockchip adds power domain support for rk3066 and rk3188
  - Amlogic adds a power measurement driver
  - Allwinner adds SRAM support for three platforms (F1C100, H5, A64 C1)
  - Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7
  - Broadcom fixes suspend/resume with Thumb2 kernels, and improves
    stability of a handful of firmware/platform interfaces
  - PXA completes their conversion to dmaengine framework
  - Renesas does a bunch of PM cleanups across many platforms
  - Tegra adds support for suspend/resume on T186/T194, which includes
    some driver cleanups and addition of wake events
  - Tegra also adds a driver for memory controller (EMC) on Tegra2
  - i.MX tweaks power domain bindings, and adds support for i.MX8MQ in GPC
  - Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60
 
  + misc cleanups across several platforms
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwqd4APHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3HXoP/icWJTGrbf9R6T7r0RWB3xeV8ouTPMM8YM5C
 6wD4LkkjgZ16Hz/ellJ0Oug77LdnJ/ZI7jH2u0IcKRXr4sL94hEo11jAJLLtCHpt
 rGiItMuEDMhNFcAK/yREI6FtRqjNZhsTuR+gkcjzMnGLCaTA1+RwQNdugH0hh0fF
 z8C6tjN+fRIeS0wInBzR/402GcgRU0DIJrr0kmklS0u6tc2QW24ffv8ymvMiVO46
 l8VemmdxVZsBU2iehraPy6mSXsyTm04dNTuHnrIw3nE3kTJF7jMvpqI/euU1eZl6
 6EzrrCym8nC66IlqhHMBB427PK8sRqJTqwqSXO6e90AqiK4H2bMovXKiob/Psq+e
 yWqPOrAr8YBLqTgauvCzVm/xneT5rZM4N0BYhOk172Uk52qenNWDnqHj41A4CMSM
 /id3L1cHs5nf2qwuMncXvLX+Y2vO2n6cMmF8cDRLu592OBZRcVepUM0xoaSdZScv
 LJsP3jH3RRcY3L2rf7bY2Mitp48bDgZMZdw/viSHsFS+SVr225uNFALFDQ9kNEoZ
 2d9i9IvC7xOMhdVAX03U7DuRcpKXBPcv+arA57PiVvR4M1HeU7VvD4ayP5loVX2J
 GoDIKiPQitAsOKzyPyZ5Jw04lxio3xZbrbmmVzEH8uKWIV5omdiMnSrFsEfduRCT
 rU+Mqe2j
 =yEX2
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Misc driver updates for platforms, many of them power related.

   - Rockchip adds power domain support for rk3066 and rk3188

   - Amlogic adds a power measurement driver

   - Allwinner adds SRAM support for three platforms (F1C100, H5, A64
     C1)

   - Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7

   - Broadcom fixes suspend/resume with Thumb2 kernels, and improves
     stability of a handful of firmware/platform interfaces

   - PXA completes their conversion to dmaengine framework

   - Renesas does a bunch of PM cleanups across many platforms

   - Tegra adds support for suspend/resume on T186/T194, which includes
     some driver cleanups and addition of wake events

   - Tegra also adds a driver for memory controller (EMC) on Tegra2

   - i.MX tweaks power domain bindings, and adds support for i.MX8MQ in
     GPC

   - Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60

  and misc cleanups across several platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
  ARM: at91: add support in soc driver for new SAM9X60
  ARM: at91: add support in soc driver for LPDDR2 SiP
  memory: omap-gpmc: Use of_node_name_eq for node name comparisons
  bus: ti-sysc: Check for no-reset and no-idle flags at the child level
  ARM: OMAP2+: Check also the first dts child for hwmod flags
  soc: amlogic: meson-clk-measure: Add missing REGMAP_MMIO dependency
  soc: imx: gpc: Increase GPC_CLK_MAX to 7
  soc: renesas: rcar-sysc: Fix power domain control after system resume
  soc: renesas: rcar-sysc: Merge PM Domain registration and linking
  soc: renesas: rcar-sysc: Remove rcar_sysc_power_{down,up}() helpers
  soc: renesas: r8a77990-sysc: Fix initialization order of 3DG-{A,B}
  dt-bindings: sram: sunxi: Add compatible for the A64 SRAM C1
  dt-bindings: sram: sunxi: Add bindings for the H5 with SRAM C1
  dt-bindings: sram: Add Allwinner suniv F1C100s
  soc: sunxi: sram: Add support for the H5 SoC system control
  soc: sunxi: sram: Enable EMAC clock access for H3 variant
  soc: imx: gpcv2: add support for i.MX8MQ SoC
  soc: imx: gpcv2: move register access table to domain data
  soc: imx: gpcv2: prefix i.MX7 specific defines
  dmaengine: pxa: make the filter function internal
  ...
2018-12-31 17:32:35 -08:00
Linus Torvalds
e0c38a4d1f Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) New ipset extensions for matching on destination MAC addresses, from
    Stefano Brivio.

 2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to
    nfp driver. From Stefano Brivio.

 3) Implement GRO for plain UDP sockets, from Paolo Abeni.

 4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT
    bit so that we could support the entire vlan_tci value.

 5) Rework the IPSEC policy lookups to better optimize more usecases,
    from Florian Westphal.

 6) Infrastructure changes eliminating direct manipulation of SKB lists
    wherever possible, and to always use the appropriate SKB list
    helpers. This work is still ongoing...

 7) Lots of PHY driver and state machine improvements and
    simplifications, from Heiner Kallweit.

 8) Various TSO deferral refinements, from Eric Dumazet.

 9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov.

10) Batch dropping of XDP packets in tuntap, from Jason Wang.

11) Lots of cleanups and improvements to the r8169 driver from Heiner
    Kallweit, including support for ->xmit_more. This driver has been
    getting some much needed love since he started working on it.

12) Lots of new forwarding selftests from Petr Machata.

13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel.

14) Packed ring support for virtio, from Tiwei Bie.

15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov.

16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu.

17) Implement coalescing on TCP backlog queue, from Eric Dumazet.

18) Implement carrier change in tun driver, from Nicolas Dichtel.

19) Support msg_zerocopy in UDP, from Willem de Bruijn.

20) Significantly improve garbage collection of neighbor objects when
    the table has many PERMANENT entries, from David Ahern.

21) Remove egdev usage from nfp and mlx5, and remove the facility
    completely from the tree as it no longer has any users. From Oz
    Shlomo and others.

22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and
    therefore abort the operation before the commit phase (which is the
    NETDEV_CHANGEADDR event). From Petr Machata.

23) Add indirect call wrappers to avoid retpoline overhead, and use them
    in the GRO code paths. From Paolo Abeni.

24) Add support for netlink FDB get operations, from Roopa Prabhu.

25) Support bloom filter in mlxsw driver, from Nir Dotan.

26) Add SKB extension infrastructure. This consolidates the handling of
    the auxiliary SKB data used by IPSEC and bridge netfilter, and is
    designed to support the needs to MPTCP which could be integrated in
    the future.

27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits)
  net: dccp: fix kernel crash on module load
  drivers/net: appletalk/cops: remove redundant if statement and mask
  bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw
  net/net_namespace: Check the return value of register_pernet_subsys()
  net/netlink_compat: Fix a missing check of nla_parse_nested
  ieee802154: lowpan_header_create check must check daddr
  net/mlx4_core: drop useless LIST_HEAD
  mlxsw: spectrum: drop useless LIST_HEAD
  net/mlx5e: drop useless LIST_HEAD
  iptunnel: Set tun_flags in the iptunnel_metadata_reply from src
  net/mlx5e: fix semicolon.cocci warnings
  staging: octeon: fix build failure with XFRM enabled
  net: Revert recent Spectre-v1 patches.
  can: af_can: Fix Spectre v1 vulnerability
  packet: validate address length if non-zero
  nfc: af_nfc: Fix Spectre v1 vulnerability
  phonet: af_phonet: Fix Spectre v1 vulnerability
  net: core: Fix Spectre v1 vulnerability
  net: minor cleanup in skb_ext_add()
  net: drop the unused helper skb_ext_get()
  ...
2018-12-27 13:04:52 -08:00
Roy Pledge
e80081c34b soc: fsl: dpio: Add BP and FQ query APIs
Add FQ (Frame Queue) and BP (Buffer Pool) query APIs that
users of QBMan can invoke to see the status of the queues
and pools that they are using.

Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 10:37:22 -08:00
Jon Hunter
f9c380efa7 soc/tegra: pmc: Drop SMP dependency from CPU APIs
When CONFIG_SMP is disabled, the tegra clk driver now fails to build:

drivers/clk/tegra/clk-tegra30.c: In function ‘tegra30_cpu_rail_off_ready’:
drivers/clk/tegra/clk-tegra30.c:1151:2: error: implicit declaration of function ‘tegra_pmc_cpu_is_powered’ [-Werror=implicit-function-declaration]
  cpu_pwr_status = tegra_pmc_cpu_is_powered(1) ||
    ^
Fix the above error by removing the CONFIG_SMP ifdef around the
declaration around the PMC CPU APIs because although these are not
needed for non-SMP configurations, there is no harm in including these
for non-SMP builds either.

Fixes: 61866523ed6e ("clk: tegra30: Use Tegra CPU powergate helper function")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-14 13:32:55 -08:00
Olof Johansson
2d32d65741 firmware: tegra: Changes for v4.21-rc1
These changes update the BPMP ABI header and implement a new variant of
 the BPMP firmware version tag query if supported.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlwKfu0THHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoTp4D/9bv3igTtqNNQdqIABfUiN98sfC4BKU
 vu/RD4vTfMTF15o/Cod6OhC6ivBdsbQgFARuzED5E5wYFPfz7YrvM8kwJ99noDAL
 bo10cawyAEd88GxE07YxLc5cos4wuB1KtWyTP+ewdRm82LxSFLFng42b/gVbHMvK
 atVFgyvg4rLsvJmAsbWlXvRx0Le6dTFowSu6dXNFQltLrfIALhc4YDmwWwSaD1Od
 k2B0Q0/3Pn3draKjPi5KUFO2A/M7XirG6iN4I2uJzx5fwWNc1Jsgdmd5bpROTRSa
 0nzZDbLpo1eVHMhDDYTohuSvgCS3ZUd5jG95V9rj6tkS0zJqTz7s595FG+QcCbRP
 xUDpAoNQVr7u8cIK0ChTbxVHegGx3rozJqUOuUqBIIPoSbMH/vzD/6GGvLgdzmes
 je3WLnLekq8zQuwMKNMDXpz90zew+CR/LX2N8SQT1xGeXF14K5NlPHJ6jouKne2S
 9xnVrTS0oHrCTdL2HMkezdeLOYzd+sR6QEgxPqtVubNVjfGEmcZbBXgf+RcrWCiC
 acs9bsDdCSWKS8OMTGGJlZUEXoopFh9DZMo3ugl6CWoEZHfOpnzJxGhcDp0JLlmt
 QGuotQo1pmoJn3Gij2RbgCB6rWzlUhJzUUsOhtzMsJlRd//xphRFKnuuAj53wm31
 KOxtQDL/WzLBVQ==
 =hyDw
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.21-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

firmware: tegra: Changes for v4.21-rc1

These changes update the BPMP ABI header and implement a new variant of
the BPMP firmware version tag query if supported.

* tag 'tegra-for-4.21-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  firmware: tegra: Use in-band messages for firmware version query
  soc/tegra: bpmp: Update ABI header
  firmware: tegra: Print version tag at full
  firmware: tegra: Switch to global mrq_is_supported()
  firmware: tegra: Add helper to check for supported MRQs

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-12 13:29:26 -08:00
Olof Johansson
4a598c7b3f soc/tegra: Changes for v4.21-rc1
These changes are mostly cleanups to the PMC driver, but they also add
 support for wake events on Tegra186 and Tegra194, which can be used to
 wake the system from sleep. With this and the corresponding device
 tree additions suspend/resume is finally working on these SoCs.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlwKfqMTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoaxjD/sGuOfraz8kRxXGnFHIemloej/jMEDS
 A77AYbE5wHLu8+1UHSxsFh3hCOn4kii/l4r74XODeJ4zNWkFTwb2p8YyN5jXB53U
 A7xENp3UPD2l47WDq5FTzhZ9Cqb3agE4J/4HRcjbLGztlvz+NG7Y8oWV0YcWbzCv
 ltvxFesiDxtm+ZGYlYIRqnyu8ucG34GTgXVTC2Y2FhinbUezFh5pMizGdmc5Nn2x
 Uy2eoZZtxma+3i/5BHzvVdZ5+lZ7QKxOfqHVVIpBhf0fEu7pbNjiHuFHxYKXq/Nu
 UxU4vPt+zFn3CeCQDFpNkSU/N5enypRZ0JLhvyzTt893C941/JE9AHDW03KbShk8
 AqHgwCDxMOY+oRt5YVucCdJFCb/gBg2HdyG4ru2d7jrLw8tMaF7yiG3kK2pqAYu7
 v8yC6DFge90JjPRlVZdwdY6/JKZIh7LuM7iYxXm1VpIfsCdrWAInEsqyiW3gu5+Z
 OPWY0OctSfoAF2LPUgdPAItjjhooGPt4gzrU2sncUlvEo8kFLR8aMZ5UDcjv2xkX
 nQ+caDAaPhnWD/ENI1BMWFyzRwLxIhgVtmKgJDx4DWj+KVJZ7Vslxl/1/gTXEGX+
 AyQ1qql24CNUpaa/kVutY0TB/E92YKuRX9EuU4PQZfTg5R1qAzs6KV1R3C4D+t5X
 Gdfes5B6zLrr6w==
 =lNWz
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.21-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

soc/tegra: Changes for v4.21-rc1

These changes are mostly cleanups to the PMC driver, but they also add
support for wake events on Tegra186 and Tegra194, which can be used to
wake the system from sleep. With this and the corresponding device
tree additions suspend/resume is finally working on these SoCs.

* tag 'tegra-for-4.21-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: pmc: Add initial Tegra194 wake events
  soc/tegra: pmc: Add initial Tegra186 wake events
  soc/tegra: pmc: Add wake event support
  soc/tegra: pmc: Add Tegra194 support
  soc/tegra: pmc: Change to use DEFINE_SHOW_ATTRIBUTE macro
  soc/tegra: Don't leak device tree node reference
  soc/tegra: fuse: Remove duplicated function declaration
  soc/tegra: pmc: Drop locking from tegra_powergate_is_powered()
  soc/tegra: pmc: Add sysfs entries for reset info
  soc/tegra: pmc: Don't power-up XUSB power-domains

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-12 13:28:24 -08:00
Olof Johansson
202f9977b0 Qualcomm ARM Based Driver Updates for v4.21
* Fix llcc license, includes, and error checks
 * Remove use of memcpy in cmd-db and fix API breakage
 * Add QCS404 compatible to SMD-RPM
 * Minor fixes for QMI
 * Add irq clear handling in QCOM Geni SE during init
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcAHmCAAoJEFKiBbHx2RXVJLwQAKXbtYh7Kl8xQPJpRtHmOTJE
 zagPkIb9xDqG2O7rWfYi6ye3/brSZv+9kv02tqwtHVlDfxtd64KHw3jor6yxozB4
 6d8F1thFiM5+lXo6ISSFJaVYwpN0AYCExFLbSup/XSyo3a70HchtXlvT0NPPTecT
 EXinXUDOizVM8SypZksoWfJWd+qWskPNxfMRQZ1e5nJlnqcRD/9XQtmZha/WZe76
 Kz78QfxLbT4KKhTEE+TAOWERT2STlxfHP0611E00LXlivqh7twtfe5u5yUntOVq0
 +56RY1K0W++Cl4P2HJrpcp+16OI2wPG1KfP4kWySXaa0HfcW4qaZvGGiOWrr1mQs
 sxRntblg0x56i4lnSTFxTrirDBiBFuzXLvLGE/RxbgACGafVh0mEtl58wJxwShKB
 a3zaztuRPcimOWbcAJN2O3nOB64lYha61JY7lo+th+IxbYAaVtp76GsVq36DHDbx
 oVREMg/zNUHRKqIQuRM372sj2VnngJ8Bw/7ecLTwydvmmb7QB6UDXI1D/L2p6Tqq
 +7Z1UHB8XIWhu2GkLjakEHs+XPcUULofWeNSsOwftv2Bmo4xw9COlQiDQjf15/ZR
 IVZp1tYFHR9v2mFMM1ZI/GdQWSl4EDE3rwvwRMlCHcEZYN4jjyv9XzV2IeMw7Tpq
 qdevDn4scHx05nBm6ZQh
 =hySS
 -----END PGP SIGNATURE-----

Merge tag 'qcom-drivers-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers

Qualcomm ARM Based Driver Updates for v4.21

* Fix llcc license, includes, and error checks
* Remove use of memcpy in cmd-db and fix API breakage
* Add QCS404 compatible to SMD-RPM
* Minor fixes for QMI
* Add irq clear handling in QCOM Geni SE during init

* tag 'qcom-drivers-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  drm: msm: Check cmd_db_read_aux_data() for failure
  soc: qcom: smd-rpm: Add QCS404 compatible
  soc: qcom: llcc-slice: Remove duplicated include from llcc-slice.c
  soc: qcom: cmd-db: Stop memcpy()ing in cmd_db_read_aux_data()
  soc: qcom: cmd-db: Remove memcpy()ing from cmd_db_get_header()
  soc: qcom: Drop help text for QCOM_QMI_HELPERS
  soc: qcom: qmi_interface: Limit txn ids to U16_MAX
  soc: qcom: llcc-slice: Add error checks for API functions
  soc: qcom/llcc: add MODULE_LICENSE tag
  soc: qcom: Add irq clear handling during SE init

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-03 13:10:10 -08:00
Thierry Reding
eac9c48aac soc/tegra: pmc: Add Tegra194 support
The PMC controller on Tegra194 has a couple of new I/O pads and drops
others compared to Tegra186.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-11-28 16:45:04 +01:00
Madalin Bucur
5c664ace8c soc/qman: add return value to interrupt coalesce changing APIs
Check that the values received by the portal interrupt coalesce
change APIs are in range.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23 11:17:06 -08:00
Stefan Wahren
502b431cda firmware: raspberrypi: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
2018-11-21 14:33:11 +01:00
Stephen Boyd
ed3cafa79e soc: qcom: cmd-db: Stop memcpy()ing in cmd_db_read_aux_data()
Let's change the function signature to return the pointer to memory or
an error pointer on failure, and take an argument that lets us return
the size of the aux data read. This way we can remove the
cmd_db_read_aux_data_len() API entirely and also get rid of the memcpy
operation from cmd_db to the caller. Updating the only user of this code
shows that making this change allows us to remove a function and put the
lookup where the user is.

Cc: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-14 10:06:24 -08:00
Bo Yan
1866d58be7 soc/tegra: fuse: Remove duplicated function declaration
The function tegra_read_chipid() is declared twice in fuse.h. Remove the
redundant declaration.

Signed-off-by: Bo Yan <byan@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-11-13 20:24:33 +01:00
Timo Alho
4bef358c90 soc/tegra: bpmp: Update ABI header
Update the firmware header file to a more recent version. The major
changes in the new version are:

 * add a new MRQ for firmware version query ABI and deprecates the old
 * add ABI to query Tegra194 CPU frequency limits
 * add ABI to control subset of PCIE UPHY state

The new header contains also some editorial changes to the
documentation.

Signed-off-by: Timo Alho <talho@nvidia.com>
Acked-by: Sivaram Nair <sivaramn@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-11-08 12:49:26 +01:00
Timo Alho
d78b5bde0f firmware: tegra: Add helper to check for supported MRQs
Add a helper function to check that firmware is supporting a given MRQ
command.

Signed-off-by: Timo Alho <talho@nvidia.com>
Acked-by: Sivaram Nair <sivaramn@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-11-08 12:49:25 +01:00
Linus Torvalds
b22b6beae6 ARM: SoC driver updates for 4.17
The most noteworthy SoC driver changes this time include:
 
 - The TEE subsystem gains an in-kernel interface to access the TEE
   from device drivers.
 
 - The reset controller subsystem gains a driver for the Qualcomm
   Snapdragon 845 Power Domain Controller.
 
 - The Xilinx Zynq platform now has a firmware interface for its
   platform management unit. This contains a firmware "ioctl" interface
   that was a little controversial at first, but the version we merged
   solved that by not exposing arbitrary firmware calls to user space.
 
 - The Amlogic Meson platform gains a "canvas" driver that is used
   for video processing and shared between different high-level drivers.
 
 The rest is more of the usual, mostly related to SoC specific power
 management support and core drivers in drivers/soc:
 
 - Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new
   features related to power and reset control.
 
 - The Mediatek mt8183 and mt6765 SoC platforms gain support for
   their respective power management chips.
 
 - A new driver for NXP i.MX8, which need a firmware interface for
   power management.
 
 - The SCPI firmware interface now contains support estimating power
   usage of performance states
 
 - The NVIDIA Tegra "pmc" driver gains a few new features, in particular
   a pinctrl interface for configuring the pads.
 
 - Lots of small changes for Qualcomm, in particular the "smem"
   device driver.
 
 - Some cleanups for the TI OMAP series related to their sysc
   controller.
 
 Additional cleanups and bugfixes in SoC specific drivers include the
 Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJb1zEhAAoJEGCrR//JCVInnYQP/1pPXWsR/DV4COf4kGJFSAFn
 EfHXJM1vKtb7AWl6SClpHFlUMt+fvL+dzDNJ9aeRr2GjcuWfzKDcrBM1ZvM70I31
 C1Oc3b6OXEERCozDpRg/Vt8OpIvvWnVpaVffS9E5y6KqF8KZ0UbpWIxUJ87ik44D
 UvNXYOU/LUGPxR1UFm5rm2zWF4i+rBvqnpVaXbeOsXsLElzxXVfv2ymhhqIpo2ws
 o6e00DSjUImg8hLL4HCGFs2EX1KSD+oFzYaOHIE0/DEaiOnxVOpMSRhX2tZ+tRRb
 DekbjL+wz5gOAKJTQfQ2sNNkOuK8WFqmE5G0RJ0iYPXuNsB/17UNb2bhTJeqGdcD
 dqCQBLQuDUD2iHJ/d4RK5Kx3a8h2X63n5bdefgF5UX/2RBpXwFk1QtHr8X0DuY8c
 o/dPGFNBOn3egzMyXrD5VEtnaTwK1Y6/h09qfuOOF1ZuYDmELKRkWMV9l8dIsvd8
 ANjaw5B8MOUAf8DccBmPgUGu0XLCDyuFGqNVd9Kj5u3az+tyggIsgkEjWg1pxTv0
 7dDDyv4Ara1V1HVDZ23l3CgmYCZQx2R/vdpX/DjuDPGEHGjZ5s2TW8P6oegdxtIh
 LcTonNoTsRYzMrGD/aqhG/8fYsAScXePa3CLKl1Hrl+wFVV0XcaggH23GwD/k+7S
 eDBrEzLkOTxM+WXvsvKY
 =c/PQ
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "The most noteworthy SoC driver changes this time include:

   - The TEE subsystem gains an in-kernel interface to access the TEE
     from device drivers.

   - The reset controller subsystem gains a driver for the Qualcomm
     Snapdragon 845 Power Domain Controller.

   - The Xilinx Zynq platform now has a firmware interface for its
     platform management unit. This contains a firmware "ioctl"
     interface that was a little controversial at first, but the version
     we merged solved that by not exposing arbitrary firmware calls to
     user space.

   - The Amlogic Meson platform gains a "canvas" driver that is used for
     video processing and shared between different high-level drivers.

  The rest is more of the usual, mostly related to SoC specific power
  management support and core drivers in drivers/soc:

   - Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new
     features related to power and reset control.

   - The Mediatek mt8183 and mt6765 SoC platforms gain support for their
     respective power management chips.

   - A new driver for NXP i.MX8, which need a firmware interface for
     power management.

   - The SCPI firmware interface now contains support estimating power
     usage of performance states

   - The NVIDIA Tegra "pmc" driver gains a few new features, in
     particular a pinctrl interface for configuring the pads.

   - Lots of small changes for Qualcomm, in particular the "smem" device
     driver.

   - Some cleanups for the TI OMAP series related to their sysc
     controller.

  Additional cleanups and bugfixes in SoC specific drivers include the
  Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (129 commits)
  firmware: tegra: bpmp: Implement suspend/resume support
  drivers: clk: Add ZynqMP clock driver
  dt-bindings: clock: Add bindings for ZynqMP clock driver
  firmware: xilinx: Add zynqmp IOCTL API for device control
  Documentation: xilinx: Add documentation for eemi APIs
  MAINTAINERS: imx: include drivers/firmware/imx path
  firmware: imx: add misc svc support
  firmware: imx: add SCU firmware driver support
  reset: Fix potential use-after-free in __of_reset_control_get()
  dt-bindings: arm: fsl: add scu binding doc
  soc: fsl: qbman: add interrupt coalesce changing APIs
  soc: fsl: bman_portals: defer probe after bman's probe
  soc: fsl: qbman: Use last response to determine valid bit
  soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan
  soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers
  soc: fsl: qbman: Check if CPU is offline when initializing portals
  reset: qcom: PDC Global (Power Domain Controller) reset controller
  dt-bindings: reset: Add PDC Global binding for SDM845 SoCs
  reset: Grammar s/more then once/more than once/
  bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
  ...
2018-10-29 15:16:01 -07:00
Linus Torvalds
62606c224d Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
 "API:
   - Remove VLA usage
   - Add cryptostat user-space interface
   - Add notifier for new crypto algorithms

  Algorithms:
   - Add OFB mode
   - Remove speck

  Drivers:
   - Remove x86/sha*-mb as they are buggy
   - Remove pcbc(aes) from x86/aesni
   - Improve performance of arm/ghash-ce by up to 85%
   - Implement CTS-CBC in arm64/aes-blk, faster by up to 50%
   - Remove PMULL based arm64/crc32 driver
   - Use PMULL in arm64/crct10dif
   - Add aes-ctr support in s5p-sss
   - Add caam/qi2 driver

  Others:
   - Pick better transform if one becomes available in crc-t10dif"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits)
  crypto: chelsio - Update ntx queue received from cxgb4
  crypto: ccree - avoid implicit enum conversion
  crypto: caam - add SPDX license identifier to all files
  crypto: caam/qi - simplify CGR allocation, freeing
  crypto: mxs-dcp - make symbols 'sha1_null_hash' and 'sha256_null_hash' static
  crypto: arm64/aes-blk - ensure XTS mask is always loaded
  crypto: testmgr - fix sizeof() on COMP_BUF_SIZE
  crypto: chtls - remove set but not used variable 'csk'
  crypto: axis - fix platform_no_drv_owner.cocci warnings
  crypto: x86/aes-ni - fix build error following fpu template removal
  crypto: arm64/aes - fix handling sub-block CTS-CBC inputs
  crypto: caam/qi2 - avoid double export
  crypto: mxs-dcp - Fix AES issues
  crypto: mxs-dcp - Fix SHA null hashes and output length
  crypto: mxs-dcp - Implement sha import/export
  crypto: aegis/generic - fix for big endian systems
  crypto: morus/generic - fix for big endian systems
  crypto: lrw - fix rebase error after out of bounds fix
  crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X.
  crypto: cavium/nitrox - NITROX command queue changes.
  ...
2018-10-25 16:43:35 -07:00
Mathias Thore
ba59d57058 net/wan/fsl_ucc_hdlc: error counters
Extract error information from rx and tx buffer descriptors,
and update error counters.

Signed-off-by: Mathias Thore <mathias.thore@infinera.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22 19:58:10 -07:00
David S. Miller
d864991b22 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts were easy to resolve using immediate context mostly,
except the cls_u32.c one where I simply too the entire HEAD
chunk.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12 21:38:46 -07:00
Arnd Bergmann
75bda3609f NXP/FSL SoC drivers updates for v4.20 take 2
- Update qbman driver to better work with CPU hotplug
 - Add Kconfig dependency of 64-bit DMA addressing for qbman driver
 - Use last reponse to determine valid bit for qbman driver
 - Defer bman_portals probe if bman is not probed
 - Add interrupt coalescing APIs to qbman driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEhb3UXAyxp6UQ0v6khtxQDvusFVQFAlu3uhEACgkQhtxQDvus
 FVTZuhAAg2G6q2ERXWe2CwI+Is8TYAc7HmD06q22+BZrmqtb1VlX56ON7HkTDzMN
 NXWw3smNs6OIKJp7f5bRpEKex8GIdqrUYOzE7vzavwXBKiQFjkYTlyyUpd1zygns
 dw8MPj5drvKWLRYonHdeLIlpuIdeau7pxOJze1odT3a5QlJQFnULIT5JA4b4LRjy
 9JNhlcr3eecQ9XMabW2cN00Ve0IjhXiIkf2sA4f8ZxHaHlt7lts7/f5fd6gnUxyc
 vLaNLj1Ul798SpiwwPEi+rog67tnuIijJggv0CM9+AAmwrs4dW5nlzKhe5WlGI53
 6o7PDFqfhD+2oeeePU8YMTwJwPv4h+8/gOM46NNs3M10VxbMwpbajXc2OLOi9qHO
 6B/+upql0kS6MORN8uMhr6Bg5QD+tTEMZUKmOi9eXxM7TIIsZPaUPkJa5SIlVXKm
 vqzA7fzmXIOlECEsXJOnXev6VARQjLK3aisZ8SCZMRV5NMIExSye5yqkEsMihblH
 qH+5CG19I24qPBp3ThnrOCkcVluzt9TWdnQ7x25752HY/UVv/lc0pbv47AZmIhdI
 MZyhjVXqXssX1EgDKEoc34KHRTj94XyLum6FaUsIc2NrO1wUTT92Q1kVdipIWC4g
 uHlr1swyUxglGAoJUIh51OZSMsu51PtTCG1pz6+uHmxfPAr+IQA=
 =2fhR
 -----END PGP SIGNATURE-----

Merge tag 'soc-fsl-next-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into next/drivers

NXP/FSL SoC drivers updates for v4.20 take 2

- Update qbman driver to better work with CPU hotplug
- Add Kconfig dependency of 64-bit DMA addressing for qbman driver
- Use last reponse to determine valid bit for qbman driver
- Defer bman_portals probe if bman is not probed
- Add interrupt coalescing APIs to qbman driver

* tag 'soc-fsl-next-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: qbman: add interrupt coalesce changing APIs
  soc: fsl: bman_portals: defer probe after bman's probe
  soc: fsl: qbman: Use last response to determine valid bit
  soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan
  soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers
  soc: fsl: qbman: Check if CPU is offline when initializing portals
  soc: fsl: qman_portals: defer probe after qman's probe
  soc: fsl: qbman: add APIs to retrieve the probing status
  soc: fsl: qe: Fix copy/paste bug in ucc_get_tdm_sync_shift()
  soc: fsl: qbman: qman: avoid allocating from non existing gen_pool

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-08 14:44:40 +02:00
Quentin Schulz
66c2132333 net: mscc: ocelot: simplify register access for PLL5 configuration
Since HSIO address space can be accessed by different drivers, let's
simplify the register address definitions so that it can be easily used
by all drivers and put the register address definition in the
include/soc/mscc/ocelot_hsio.h header file.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:36:44 -07:00
Quentin Schulz
8afc978925 net: mscc: ocelot: move the HSIO header to include/soc
Since HSIO address space can be used by different drivers (PLL, SerDes
muxing, temperature sensor), let's move it somewhere it can be included
by all drivers.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05 14:36:44 -07:00
Madalin Bucur
6d06009cb2 soc: fsl: qbman: add interrupt coalesce changing APIs
Add the APIs required to control the QMan portal interrupt coalescing
settings.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-10-05 14:06:56 -05:00
Laurentiu Tudor
853dc104e6 soc: fsl: qbman: add APIs to retrieve the probing status
Add a couple of new APIs to check the probing status of qman and bman:
 'int bman_is_probed()' and 'int qman_is_probed()'.
They return the following values.
 *  1 if qman/bman were probed correctly
 *  0 if qman/bman were not yet probed
 * -1 if probing of qman/bman failed
Drivers that use qman/bman driver services are required to use these
APIs before calling any functions exported by qman or bman drivers
or otherwise they will crash the kernel.
The APIs will be used in the following couple of qbman portal patches
and later in the series in the dpaa1 ethernet driver.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-09-27 15:43:35 -05:00
Horia Geantă
55d0110248 soc: fsl: dpio: add congestion notification support
Add support for Congestion State Change Notifications (CSCN), which
allow DPIO users to be notified when a congestion group changes its
state (due to hitting the entrance / exit threshold).

Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-21 13:24:50 +08:00
Horia Geantă
009447a038 soc: fsl: dpio: add frame list format support
Add support for dpaa2_fd_list format, i.e. dpaa2_fl_entry structure
and accessors.

Frame list entries (FLEs) are similar, but not identical to FDs:
+ "F" (final) bit
- FMT[b'01] is reserved
- DD, SC, DROPP bits (covered by "FD compatibility" field in FLE case)
- FLC[5:0] not used for stashing

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-21 13:24:50 +08:00
Horia Geantă
48c43de0b5 soc: fsl: dpio: add back some frame queue functions
This commit adds back functions removed in
commit a211c8170b ("staging: fsl-mc/dpio: remove couple of unused functions")
since dpseci object will make use of them.

Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-21 13:24:50 +08:00
Aapo Vienamo
fccf0f76ec soc/tegra: pmc: Remove public pad voltage APIs
Make tegra_io_pad_set_voltage() and tegra_io_pad_get_voltage() static
and remove the prototypes from pmc.h. Remove enum tegra_io_pad_voltage
and use the defines from <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
instead.

These functions aren't used outside of the pmc driver and new use cases
should use the pinctrl interface instead.

Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-08-27 12:25:18 +02:00
Aapo Vienamo
13136a47a0 soc/tegra: pmc: Fix pad voltage configuration for Tegra186
Implement support for the PMC_IMPL_E_33V_PWR register which replaces
PMC_PWR_DET register interface of the SoC generations preceding
Tegra186. Also add the voltage bit offsets to the tegra186_io_pads[]
table and the AO_HV pad.

Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-08-27 12:25:17 +02:00
Olof Johansson
1ca8c0a763 Various updates to soc/fsl for 4.19
Moves DPAA2 DPIO driver from staging to fsl/soc
 Adds multiple-pin support to QE gpio driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbV51GAAoJEIbcUA77rBVUzB0P/1l1XZ14jlyIc4PI8eiEKx2i
 Emet7qvEaeeoRYI06Dqtm+VkNYjO2Ev4n+XQYPTZGP3/b+cPh7CEI1N/L+ULFGop
 HtD0FsOikvfql7BMHvGCCRLzFYHYjDNpg8JCB/3q+aOhI3/8HQyVIAEyggh1Ztam
 NSmMQXHwdB8d1qAGcSYGttiJCIxLcDUtVEGcF6ZN6Lg3orpDHEbCceeQ10f1yayQ
 PZuM+F1YFM4Lp17gt92caMSKENsN0Kyk/7lEVPHq0ANGMvVsHIVtZGJML+/ulaeI
 v7FZrEicYJVu8LDkFAPeg3qK+O6WirOa9bQEctH7jia43QWZAZ9EROCkFOzlEwx6
 +AmOB5BsqMTQsz7HppNOqB6v3zgK898UIYavGeud0c/SaIqAW3uVkKvHLKxXd/uY
 K2eyvxcBs9ttK+qLopLWO1QzwWAvedIZFjSDCYpGcWDlhZR1lOqoC1u6wSApX/ZC
 h7SGOOhjmzZBLtS89hHn7LnzN7RI6teNmC9uhdFtY+55IVfcRAzX3m2ym/TWPRc8
 dQNA/vNMuXK2Hv8rtElqIEVUvWil3p86+640m1fnbkljmSqgzp8vAIAopUbhq2Qj
 QytaQBwWPcIoAgKQjLMOypjyCTyNs1oFhKycGlwL4Jq5BwxWq27714fl+dSk4JMz
 itj5Fz0+82WeDts7CBjM
 =9CHI
 -----END PGP SIGNATURE-----

Merge tag 'soc-fsl-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into next/drivers

Various updates to soc/fsl for 4.19

Moves DPAA2 DPIO driver from staging to fsl/soc
Adds multiple-pin support to QE gpio driver

* tag 'soc-fsl-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: cleanup Kconfig menu
  soc: fsl: dpio: Convert DPIO documentation to .rst
  staging: fsl-mc: Remove remaining files
  staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl
  staging: fsl-dpaa2: eth: move generic FD defines to DPIO
  soc: fsl: qe: gpio: Add qe_gpio_set_multiple

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-26 00:12:56 -07:00
Olof Johansson
d7e8323043 Qualcomm ARM Based Driver Updates for v4.19
* Add Qualcomm LLCC driver
 * Add Qualcomm RPMH controller
 * Fix memleak in Qualcomm RMTFS
 * Add dummy qcom_scm_assign_mem()
 * Fix check for global partition in SMEM
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbU6fmAAoJEFKiBbHx2RXV7XQQAIu/F5xLNdwaTl0ZRMOKgCEt
 Ry6ggc6IdldP/B3O92texnQYmqybBsraSTdrCtYFTbsScuQYNR8kcMDVsaeAKAIx
 f0cF5c0hwco1BRbSzfxszoCf/L0bCm9HMhlzgIsMxPzyQxfi6JLTGC2Dy83TBWfp
 3NtetOjzwGQZm4dqm5itxbGZNHUjkx15jcNau1cPztMAZouWqoVjbcdZkFGPyP7i
 Qa/K6/s8eUXkD4fxJZYD5OMO/P8NrMP4QQteYRdXzTteVtwxlCgOxkPHlrMRaIqm
 xeza4LW19AImKPyoodTaGQuTYzaJOa2t0it6VCo80SmRB0xXhix64+t+XFR4kQXR
 txddfdAz5EGBTClyqw8FQGFVPnvxoVz8FkjUEH/xrgDDCvG6zjNHSkoimEMDSfV0
 8DbQQI0elMD2vUttDieLNjrSGNmDIVbz5QNWHF8E0VoAVNgL+EX2sNQQe8TUq5GG
 W2l7VsAQdwi5eTsaVzZpkcwRan1kkPu39Rt8CY36E5wCj4sALOszIG4OVW1PJohi
 nP7xajCocFgf408Se/u4ApV5IcCLki/UQqC5ppFM5XlyTtNfzdBnvWVVylJtpwFU
 1m4D+soWyCqeTtACCkvQQyu+ztV4VAqyPZc/heK8/ANJRMwMlPTZSH6kIHFC4obF
 K5sFkqYOkflmuSjczH/E
 =t3C0
 -----END PGP SIGNATURE-----

Merge tag 'qcom-drivers-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers

Qualcomm ARM Based Driver Updates for v4.19

* Add Qualcomm LLCC driver
* Add Qualcomm RPMH controller
* Fix memleak in Qualcomm RMTFS
* Add dummy qcom_scm_assign_mem()
* Fix check for global partition in SMEM

* tag 'qcom-drivers-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  soc: qcom: rmtfs-mem: fix memleak in probe error paths
  soc: qcom: llc-slice: Add missing MODULE_LICENSE()
  drivers: qcom: rpmh: fix unwanted error check for get_tcs_of_type()
  drivers: qcom: rpmh-rsc: fix the loop index check in get_req_from_tcs
  firmware: qcom: scm: add a dummy qcom_scm_assign_mem()
  drivers: qcom: rpmh-rsc: Check cmd_db_ready() to help children
  drivers: qcom: rpmh-rsc: allow active requests from wake TCS
  drivers: qcom: rpmh: add support for batch RPMH request
  drivers: qcom: rpmh: allow requests to be sent asynchronously
  drivers: qcom: rpmh: cache sleep/wake state requests
  drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS
  drivers: qcom: rpmh-rsc: write sleep/wake requests to TCS
  drivers: qcom: rpmh: add RPMH helper functions
  drivers: qcom: rpmh-rsc: log RPMH requests in FTRACE
  dt-bindings: introduce RPMH RSC bindings for Qualcomm SoCs
  drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs
  drivers: soc: Add LLCC driver
  dt-bindings: Documentation for qcom, llcc
  soc: qcom: smem: Correct check for global partition

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-26 00:03:25 -07:00
Roy Pledge
c89105c9b3 staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl
Move the NXP DPIO (Datapath I/O Driver) out of the
drivers/staging directory and into the drivers/soc/fsl directory.

The DPIO driver enables access to Queue and Buffer Manager (QBMAN)
hardware on NXP DPAA2 devices. This is a prerequisite to moving the
DPAA2 Ethernet driver out of staging.

Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-07-24 16:18:55 -05:00
Lina Iyer
c8790cb6da drivers: qcom: rpmh: add support for batch RPMH request
Platform drivers need make a lot of resource state requests at the same
time, say, at the start or end of an usecase. It can be quite
inefficient to send each request separately. Instead they can give the
RPMH library a batch of requests to be sent and wait on the whole
transaction to be complete.

rpmh_write_batch() is a blocking call that can be used to send multiple
RPMH command sets. Each RPMH command set is set asynchronously and the
API blocks until all the command sets are complete and receive their
tx_done callbacks.

Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21 13:33:36 -05:00
Lina Iyer
564b5e24cc drivers: qcom: rpmh: allow requests to be sent asynchronously
Platform drivers that want to send a request but do not want to block
until the RPMH request completes have now a new API -
rpmh_write_async().

The API allocates memory and send the requests and returns the control
back to the platform driver. The tx_done callback from the controller is
handled in the context of the controller's thread and frees the
allocated memory. This API allows RPMH requests from atomic contexts as
well.

Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21 13:33:27 -05:00
Lina Iyer
600513dfee drivers: qcom: rpmh: cache sleep/wake state requests
Active state requests are sent immediately to the RSC controller, while
sleep and wake state requests are cached in this driver to avoid taxing
the RSC controller repeatedly. The cached values will be sent to the
controller when the rpmh_flush() is called.

Generally, flushing is a system PM activity and may be called from the
system PM drivers when the system is entering suspend or deeper sleep
modes during cpuidle.

Also allow invalidating the cached requests, so they may be re-populated
again.

Signed-off-by: Lina Iyer <ilina@codeaurora.org>
[rplsssn: remove unneeded semicolon, address line over 80chars error]
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21 13:33:12 -05:00
Lina Iyer
c1038456b0 drivers: qcom: rpmh: add RPMH helper functions
Sending RPMH requests and waiting for response from the controller
through a callback is common functionality across all platform drivers.
To simplify drivers, add a library functions to create RPMH client and
send resource state requests.

rpmh_write() is a synchronous blocking call that can be used to send
active state requests.

Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21 13:32:40 -05:00
Lina Iyer
658628e7ef drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs
Add controller driver for QCOM SoCs that have hardware based shared
resource management. The hardware IP known as RSC (Resource State
Coordinator) houses multiple Direct Resource Voter (DRV) for different
execution levels. A DRV is a unique voter on the state of a shared
resource. A Trigger Control Set (TCS) is a bunch of slots that can house
multiple resource state requests, that when triggered will issue those
requests through an internal bus to the Resource Power Manager Hardened
(RPMH) blocks. These hardware blocks are capable of adjusting clocks,
voltages, etc. The resource state request from a DRV are aggregated
along with state requests from other processors in the SoC and the
aggregate value is applied on the resource.

Some important aspects of the RPMH communication -
- Requests are <addr, value> with some header information
- Multiple requests (upto 16) may be sent through a TCS, at a time
- Requests in a TCS are sent in sequence
- Requests may be fire-n-forget or completion (response expected)
- Multiple TCS from the same DRV may be triggered simultaneously
- Cannot send a request if another request for the same addr is in
  progress from the same DRV
- When all the requests from a TCS are complete, an IRQ is raised
- The IRQ handler needs to clear the TCS before it is available for
  reuse
- TCS configuration is specific to a DRV
- Platform drivers may use DRV from different RSCs to make requests

Resource state requests made when CPUs are active are called 'active'
state requests. Requests made when all the CPUs are powered down (idle
state) are called 'sleep' state requests. They are matched by a
corresponding 'wake' state requests which puts the resources back in to
previously requested active state before resuming any CPU. TCSes are
dedicated for each type of requests. Active mode TCSes (AMC) are used to
send requests immediately to the resource, while control TCS are used to
provide specific information to the controller. Sleep and Wake TCS send
sleep and wake requests, after and before the system halt respectively.

Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21 13:32:06 -05:00
Stefan Wahren
be3035e362 ARM: bcm2835: Add GET_THROTTLED firmware property
Recent Raspberry Pi firmware provides a mailbox property to detect
under-voltage conditions. Here is the current definition.

The u32 value returned by the firmware is divided into 2 parts:
  - lower 16-bits are the live value
  - upper 16-bits are the history or sticky value

  Bits:
  0: undervoltage
  1: arm frequency capped
  2: currently throttled
  16: undervoltage has occurred
  17: arm frequency capped has occurred
  18: throttling has occurred

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
2018-06-21 17:17:11 -07:00
Linus Torvalds
8efcf34a26 ARM: SoC: late updates
This is a branch with a few merge requests that either came in late, or
 took a while longer for us to review and merge than usual and thus cut
 it a bit close to the merge window. We stage them in a separate branch
 and if things look good, we still send them up -- and that's the case
 here.
 
 This is mostly DT additions for Renesas platforms, adding IP block
 descriptions for existing and new SoCs.
 
 There are also some driver updates for Qualcomm platforms for SMEM/QMI
 and GENI, which is their generalized serial protocol interface.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlsfCVIPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3KOcP/3O2+igstXt5rhemITdyi8rHkrIHPgetf25e
 ISBQzYrQOHV21SqT4le/Gk2CCQ6iX5Nv2DYoIrCzFWi/4DoDxXvryczQLla02Nru
 i8fcuxae7aFGW7/97G1+cATGPwuBLPiKXs6Wj01sKHeLBja5Det7eoXuHag7Y/Lo
 4ls9wNZybMdlCcGm6+ULdj+XUdRyYUhOQQYvnPm2Q8hEkM+AiwLOBJTFwef9P5ad
 mX37kPDfwCxYwQXgZB1RkK/oJu0G2mTZXmGH5o+s+9yAyAupCQhmHGOrt3mlOf7j
 tLRlSgarJlO/QGIpJmDuCcxt3msD3OMd2dPbdgwojdpvycOU8EVWYLmCRpyIWQXv
 DCv9A9Gp4KlJnwxheVegBtilRA1aKsGuarWq6yeyOFt8N23Bgg/IjYKI9JF5+hPD
 M4q1oVAbUlfWb79rEc+TB0d7euREBkNn4TzzKMSOyP3eGUrXR0WUlq2A2VLxgIJo
 cx/ufY7CwvRgV+VxfhRbca+FmwDnu7uqzwLe73Ys2hnsuv8hXEtc+vSybqKqxVeU
 nHpWAqwaWhijlJiGq722vPo8avrLwjsxRwimogvijtesz9ZlTqrGtjkg61+eN2h8
 eeuyRAsMUfVRiKuL3W+q4s0rzIauormnKsvRScKVyNFuiJfrfYb1odLoDGaOV/9G
 dQ7hA7TW
 =RUL0
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late updates from Olof Johansson:
 "This is a branch with a few merge requests that either came in late,
  or took a while longer for us to review and merge than usual and thus
  cut it a bit close to the merge window. We stage them in a separate
  branch and if things look good, we still send them up -- and that's
  the case here.

  This is mostly DT additions for Renesas platforms, adding IP block
  descriptions for existing and new SoCs.

  There are also some driver updates for Qualcomm platforms for SMEM/QMI
  and GENI, which is their generalized serial protocol interface"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (186 commits)
  soc: qcom: smem: introduce qcom_smem_virt_to_phys()
  soc: qcom: qmi: fix a buffer sizing bug
  MAINTAINERS: Update pattern for qcom_scm
  soc: Unconditionally include qcom Makefile
  soc: qcom: smem: check sooner in qcom_smem_set_global_partition()
  soc: qcom: smem: fix qcom_smem_set_global_partition()
  soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private()
  soc: qcom: smem: byte swap values properly
  soc: qcom: smem: return proper type for cached entry functions
  soc: qcom: smem: fix first cache entry calculation
  soc: qcom: cmd-db: Make endian-agnostic
  drivers: qcom: add command DB driver
  arm64: dts: renesas: salvator-common: Add ADV7482 support
  ARM: dts: r8a7740: Add CEU1
  ARM: dts: r8a7740: Add CEU0
  arm64: dts: renesas: salvator-common: enable VIN
  arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes
  arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes
  arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes
  arm64: dts: renesas: r8a7795-es1: add CSI-2 node
  ...
2018-06-11 18:19:45 -07:00
Arnd Bergmann
32561354b1 ARM: tegra: fix compile-testing PCI host driver
The tegra_cpuidle_pcie_irqs_in_use() function is stubbed out for non-ARM
builds, but now we can compile-test the Tegra pci driver on non-Tegra
ARM platforms as well, which results in a new link error:

drivers/pci/host/pci-tegra.o: In function `tegra_pcie_map_irq':
pci-tegra.c:(.text+0x288): undefined reference to `tegra_cpuidle_pcie_irqs_in_use'
drivers/pci/host/pci-tegra.o: In function `tegra_msi_map':
pci-tegra.c:(.text+0xba0): undefined reference to `tegra_cpuidle_pcie_irqs_in_use'

This adapts the #ifdef statement to match the exact condition under which
the function can be called.

Fixes: 51bc085d64 ("PCI: Improve host drivers compile test coverage")
Cc: Rob Herring <robh@kernel.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-02 01:17:47 -07:00
Olof Johansson
ae709bf8ad Qualcomm ARM Based Driver Updates for v4.18
* Various SMEM updates/fixes
 * Add qcom_smem_virt_to_phys SMEM API
 * Update MAINTAINERS to include qcom_scm pattern
 * Add Qualcomm Command DB driver
 * Add Qualcomm SCM compatible for IPQ4019
 * Add MSM8998 to smd-rpm compatible list
 * Add Qualcomm GENI based QUP wrapper
 * Fix Qualcomm QMI buffer sizing bug
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbCHgwAAoJEFKiBbHx2RXVUHEP+wWnlsXvaoT50PRavwcW2Gbk
 OLWpWWeh90TRtuW9IZ+VXUhClVSvSBi+M46xKqO2M/0WumNRRE4dZDL3DjSqOBVZ
 2MQP+uhfviv5GqpEuPq18luedV6S0orsQY+FLmqD4+/vHW8oXUvC1m2iqsYkst27
 gtPYSiuVZkJDc0pvPzsFDFL5WBQ84W4ki2Jsc2xuf0clUxASoOfT8/RFyZ1M3suV
 R9hzOUCWY1+c+YZbvYyPTLu1Y20ksHcnfnhAc/ZUxGyzIWLX30XWjc26pJbF8eRU
 EJiI0pyPkzue4GokrWI1H9AOgmSoJjdMFg0uvz3Y6opreKJi5+GSiVZeojU7/e5a
 yNhrdF6R9jp5n/jwvql7yiMHwxiv8dzuSvvlQCJfEMVZBD2maPAojiXXOFs06pNg
 WdhKFO5x4XH+kkiUnDs7sXpT/Szd1Eqr9wsIxLj9pbH++0Z5TYpOjFkE948fiLa9
 QUywzT4TLD5/N4z4iIsE8Xd4Zm+jxlQ/1AEouegntkav0UgCeJsHlijGl2T5xrPC
 NDRSUpABI6Ypf+mDlxsVI+9WZm7o7PTAVUVnOrKF7FRZRNdGOLsrV0f5awJuyBgf
 XfhsOUm6IB3vzON2TrvVno7Fa4vdOFFGZsTbn8hdW2YSDpgLmebHZg20hAjXrImd
 8VB7e4tK0yPtweUfIg9U
 =hFnt
 -----END PGP SIGNATURE-----

Merge tag 'qcom-drivers-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/late

Qualcomm ARM Based Driver Updates for v4.18

* Various SMEM updates/fixes
* Add qcom_smem_virt_to_phys SMEM API
* Update MAINTAINERS to include qcom_scm pattern
* Add Qualcomm Command DB driver
* Add Qualcomm SCM compatible for IPQ4019
* Add MSM8998 to smd-rpm compatible list
* Add Qualcomm GENI based QUP wrapper
* Fix Qualcomm QMI buffer sizing bug

* tag 'qcom-drivers-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  soc: qcom: smem: introduce qcom_smem_virt_to_phys()
  soc: qcom: qmi: fix a buffer sizing bug
  MAINTAINERS: Update pattern for qcom_scm
  soc: Unconditionally include qcom Makefile
  soc: qcom: smem: check sooner in qcom_smem_set_global_partition()
  soc: qcom: smem: fix qcom_smem_set_global_partition()
  soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private()
  soc: qcom: smem: byte swap values properly
  soc: qcom: smem: return proper type for cached entry functions
  soc: qcom: smem: fix first cache entry calculation
  soc: qcom: cmd-db: Make endian-agnostic
  drivers: qcom: add command DB driver
  soc: qcom: Add GENI based QUP Wrapper driver
  soc: qcom: smd-rpm: Add msm8998 compatible
  firmware: qcom: scm: Add ipq4019 soc compatible

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-26 11:51:55 -07:00
Mahesh Sivasubramanian
312416d917 drivers: qcom: add command DB driver
Command DB is a simple database in the shared memory of QCOM SoCs, that
provides information regarding shared resources. Some shared resources
in the SoC have properties that are probed dynamically at boot by the
remote processor. The information pertaining to the SoC and the platform
are made available in the shared memory. Drivers can query this
information using predefined strings.

Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25 15:53:52 -05:00
Olof Johansson
6874f9de65 memory: tegra: Changes for v4.18-rc1
This contains some cleanup of the memory controller driver as well as
 unification work to share more code between Tegra20 and later SoC
 generations. Also included are an implementation for the hot resets
 functionality by the memory controller which is required to properly
 reset busy hardware.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlr/O5kTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoYBuD/0StspIEG9GK8xOdf93unbziinCZ2DG
 e+xae7l5VfC2VsG5MgyYCr0ugOThdHHzqqsit3uHBXe9cUlNaL6YKyAiTIT7HFNM
 a0lnE+I++p0bL0GqMa/9l9jWnheR5iKnZYratyKJjtmEd9ljDcgo4Xn0lUonf3NS
 9gmI/2qiqkry+pLRafN65H6mbK6JyQ07xZAqd322S8aVkKx10L+GwzMjj6K342zu
 KPJd5B2mpCkaAc9maFOY5zcljaRBNU5mFGJEzhdzrq6KXcfDnZxyufVX80RhP9vO
 9RQJyFVsFiBgH59YPBc72X8Nu0Cc/14jTH1rE55R4239y96cJ/LuniYtHcWqumuL
 OQgsMfslO8RJ9/XBy/0UEznx1hnDJGfT7s2SRfgCsGnKegvcSw1IASI7xA+49DIR
 ZpVLEIB3Htq5DGymQrDG99z6tccMV5PJNEOjDhrh74DSXy9S/6Hl9UAoX3455/7Y
 zP2B5yUfaCnipwWXSowzmkXRKfCrHus1o//YfyarhmRVeDNeMkdbPcxGFZL7Y+MC
 PPorRu+WdKKzcY+8xmQig+UY2K3thpYSNG1D8vZLC6Dv3r06qGAk2vy9pV2bYG86
 4FG9Ory36XK/5fnfLTvTPnbguRNI1y/hbQ7XTTJcnxCvUqNkT7bAgspPfn0gkY+1
 Uh8Jm57WooiwHQ==
 =uVPT
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.18-memory-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

memory: tegra: Changes for v4.18-rc1

This contains some cleanup of the memory controller driver as well as
unification work to share more code between Tegra20 and later SoC
generations. Also included are an implementation for the hot resets
functionality by the memory controller which is required to properly
reset busy hardware.

* tag 'tegra-for-4.18-memory-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: memory: tegra: Remove Tegra114 SATA and AFI reset definitions
  memory: tegra: Remove Tegra114 SATA and AFI reset definitions
  memory: tegra: Register SMMU after MC driver became ready
  memory: tegra: Add Tegra210 memory controller hot resets
  memory: tegra: Add Tegra124 memory controller hot resets
  memory: tegra: Add Tegra114 memory controller hot resets
  memory: tegra: Add Tegra30 memory controller hot resets
  memory: tegra: Add Tegra20 memory controller hot resets
  memory: tegra: Introduce memory client hot reset
  memory: tegra: Squash tegra20-mc into common tegra-mc driver
  memory: tegra: Remove unused headers inclusions
  memory: tegra: Apply interrupts mask per SoC
  memory: tegra: Setup interrupts mask before requesting IRQ
  memory: tegra: Do not handle spurious interrupts
  dt-bindings: memory: tegra: Add hot resets definitions

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-25 05:14:34 -07:00
Dmitry Osipenko
20e92462cd memory: tegra: Introduce memory client hot reset
In order to reset busy HW properly, memory controller needs to be
involved, otherwise it is possible to get corrupted memory or hang machine
if HW was reset during DMA. Introduce memory client 'hot reset' that will
be used for resetting of busy HW.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-30 10:12:21 +02:00
Dmitry Osipenko
a8d502fd33 memory: tegra: Squash tegra20-mc into common tegra-mc driver
Tegra30+ has some minor differences in registers / bits layout compared
to Tegra20. Let's squash Tegra20 driver into the common tegra-mc driver
in a preparation for the upcoming MC hot reset controls implementation,
avoiding code duplication.

Note that this currently doesn't report the value of MC_GART_ERROR_REQ
because it is located within the GART register area and cannot be safely
accessed from the MC driver (this happens to work only by accident). The
proper solution is to integrate the GART driver with the MC driver, much
like is done for the Tegra SMMU, but that is an invasive change and will
be part of a separate patch series.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-30 10:10:00 +02:00
Dmitry Osipenko
1c74d5c0de memory: tegra: Apply interrupts mask per SoC
Currently we are enabling handling of interrupts specific to Tegra124+
which happen to overlap with previous generations. Let's specify
interrupts mask per SoC generation for consistency and in a preparation
of squashing of Tegra20 driver into the common one that will enable
handling of GART faults which may be undesirable by newer generations.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-27 11:23:04 +02:00
Geert Uytterhoeven
144345a4a8 soc: bcm2835: Make !RASPBERRYPI_FIRMWARE dummies return failure
If CONFIG_RASPBERRYPI_FIRMWARE=n:

    drivers/gpio/gpio-raspberrypi-exp.c: In function ‘rpi_exp_gpio_get_polarity’:
    drivers/gpio/gpio-raspberrypi-exp.c:71: warning: ‘get.polarity’ is used uninitialized in this function
    drivers/gpio/gpio-raspberrypi-exp.c: In function ‘rpi_exp_gpio_get_direction’:
    drivers/gpio/gpio-raspberrypi-exp.c:150: warning: ‘get.direction’ is used uninitialized in this function

The dummy firmware interface functions return 0, which means success,
causing subsequent code to make use of the never initialized output
parameter.

Fix this by making the dummy functions return an error code (-ENOSYS)
instead.

Note that this assumes the firmware always fills in the requested data
in the CONFIG_RASPBERRYPI_FIRMWARE=y case.

Fixes: d45f1a563b ("staging: vc04_services: fix up rpi firmware functions")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-04-16 15:15:23 -07:00
Linus Torvalds
38c23685b2 ARM: SoC driver updates for 4.17
The main addition this time around is the new ARM "SCMI" framework,
 which is the latest in a series of standards coming from ARM to do power
 management in a platform independent way. This has been through many
 review cycles, and it relies on a rather interesting way of using the
 mailbox subsystem, but in the end I agreed that Sudeep's version was
 the best we could do after all.
 
 Other changes include:
 
 - the ARM CCN driver is moved out of drivers/bus into drivers/perf,
   which makes more sense. Similarly, the performance monitoring
   portion of the CCI driver are moved the same way and cleaned up
   a little more.
 
 - a series of updates to the SCPI framework
 
 - support for the Mediatek mt7623a SoC in drivers/soc
 
 - support for additional NVIDIA Tegra hardware in drivers/soc
 
 - a new reset driver for Socionext Uniphier
 
 - lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and
   drivers/firmware and drivers/reset across platforms
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaxiNzAAoJEGCrR//JCVInYhYP/2kPhc5t/kszA1bcklcbO9dY
 eX37Ra/RR4yQ5yeQZVIZ4UkUovxk9PmG2tM4K5oJaTDsz5pPEgavVOOr3sbfj6vb
 4O9auTeysEQlHcbVdNFum0YS2gUY2YD7D12DTRorotLxCqod184ccWXq0XGfIWaY
 l3YRrcL/lPlqmyS3z/GNx9oNygOMUzEfXfIQYICyzHuYiLBUGnkKC1vIb+Hx1TDq
 Cxk++AUqH13Mss24O2A2QQh+oBHj2BybDLLqwcC5PSpsUbFrVCfzG54l43mig32T
 NOxV0Qnml2wAtU4H0QcgtSgwRimHD0YOiX8ssquvDDiqTqM5G+llSTGkEbYe+AUW
 4GIZYoBOwGkfEXS+tyymHe9yfc5h1OLYAeFU1jRm723c7phanuu67rPn35YC8UMK
 zSql10JpkAGNzMikrxxb6wnis951w2UFlzhgZQ6ItA/nRq3l+oEQA0Qiljv965nz
 DVLsD5+gdhK6GBctkzlsD5HFn6GjM8JilnsOVPHD765nKnVBSxKiXRLV228XVug2
 rChF1FhQqLnM54jCMqHZX5fS9SbSgtYswHqIXpVw6GmJkqq/Ly10yGR0vuWD+uyn
 BV7q5AKpGrwm6wZkMM2uZ1VdUtWzn856AbkqrvX/QhmJcX4McuqaLUrC8bSOj1ty
 KeVil0akq3nU+xHl5Ojs
 =Pmsx
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "The main addition this time around is the new ARM "SCMI" framework,
  which is the latest in a series of standards coming from ARM to do
  power management in a platform independent way.

  This has been through many review cycles, and it relies on a rather
  interesting way of using the mailbox subsystem, but in the end I
  agreed that Sudeep's version was the best we could do after all.

  Other changes include:

   - the ARM CCN driver is moved out of drivers/bus into drivers/perf,
     which makes more sense. Similarly, the performance monitoring
     portion of the CCI driver are moved the same way and cleaned up a
     little more.

   - a series of updates to the SCPI framework

   - support for the Mediatek mt7623a SoC in drivers/soc

   - support for additional NVIDIA Tegra hardware in drivers/soc

   - a new reset driver for Socionext Uniphier

   - lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and
     drivers/firmware and drivers/reset across platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits)
  reset: uniphier: add ethernet reset control support for PXs3
  reset: stm32mp1: Enable stm32mp1 reset driver
  dt-bindings: reset: add STM32MP1 resets
  reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset control
  reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency
  reset: modify the way reset lookup works for board files
  reset: add support for non-DT systems
  clk: scmi: use devm_of_clk_add_hw_provider() API and drop scmi_clocks_remove
  firmware: arm_scmi: prevent accessing rate_discrete uninitialized
  hwmon: (scmi) return -EINVAL when sensor information is unavailable
  amlogic: meson-gx-socinfo: Update soc ids
  soc/tegra: pmc: Use the new reset APIs to manage reset controllers
  soc: mediatek: update power domain data of MT2712
  dt-bindings: soc: update MT2712 power dt-bindings
  cpufreq: scmi: add thermal dependency
  soc: mediatek: fix the mistaken pointer accessed when subdomains are added
  soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC
  soc: mediatek: avoid hardcoded value with bus_prot_mask
  dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding
  dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC
  ...
2018-04-05 21:29:35 -07:00
Arnd Bergmann
d0994465d0 firmware: Changes for v4.17-rc1
These changes are rather small, with just a fix for a return value check
 and some preparatory work for Tegra194 BPMP support.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlqrz+cTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoeYLEACtgcGVUSA/gsqdskhIHVE9zVmFgQes
 sivqoXAsMKvuHnBpJ3QG0BLXF0FWFmXwpRtCmblWwsp+OredeXv+Kv7Zki4/hvBD
 IsuXaerTxTcI8PgD94TwiPNqSX8HrqAvQs5402QxShSkQO0eGXUcFo3I1nzKAerm
 kHX2GNBqg2qDaAGA7jUcmAs/XNV4hxdm3tPWntqgB89jyuM2Qhyg0/v/XVnYjZJr
 gc8oClIpXZMdM1dRLbHWMVYUBLeSIHdAGVp9mfx53cCALoW9aGmwceO0I7ZWU2F0
 07YHSnoRZO6Ma2+yzoDFNeaOzA3yuX2dfGYQ+kHHUXdWvO61uArs5eBrOinPNPSb
 +ohQtkxcU29NZ5YkIaS1C36sKrPDJMYFm/6aKB8bp+I+cy16g/P6I3XE5yFu/r55
 7uWmfEiu9oNvllHEEPSlsslwaFZds9l8ticQ5D+DUm6duPsInrk4hNrqXRlM9daK
 kHw5dq/+gAZJOUhhjMqhTthyqpqKHJlR6hUX9clEB8H2LMkGbcQZQGJ669nNJBL1
 FxROPfSm1cPsU6YdXePY0OGHoGN0U2jVgDgqwNdZW1I8QZSH1YDAG1I7YvCEyGdf
 4egRaOPcE7JGhaOExVxDEI8Z1Nk1HAoSLEwVKeIeJEcrzknzCmAtnJ4L9tSlwYFp
 Ea8cQ9BWAcqX0w==
 =oigm
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.17-firmware' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

Pull "firmware: Changes for v4.17-rc1" from Thierry Reding:

These changes are rather small, with just a fix for a return value check
and some preparatory work for Tegra194 BPMP support.

* tag 'tegra-for-4.17-firmware' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  firmware: tegra: adjust tested variable
  firmware: tegra: Simplify channel management
2018-03-27 15:50:57 +02:00
Linus Walleij
95260c17b2 Linux 4.16-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlqlyPEeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGNa0H/RIa/StQuYu/SBwa
 JRqQFmkIsx+gG+FyamJrqGzRfyjounES8PbfyaN3cCrzYgeRwMp1U/bZW6/l5tkb
 OjTtrCJ6CJaa21fC/7aqn3rhejHciKyk83EinMu5WjDpsQcaF2xKr3SaPa62Ja24
 fhawKq3CnUa+OUuAbicVX8yn4viUB6x8FjSN/IWfp3Cs4IBR7SGxxD7A4MET9FbQ
 5OOu0al8ly9QeCggTtJyk+cApeLfexEBTbUur9gm7GcH9jhUtJSyZCZsDJx6M2yb
 CwdgF4fyk58c1fuHvTFb0AdUns55ba3nicybRHHMVbDpZIG9v4/M1yJETHHf5cD7
 t3rFjrY=
 =+Ldf
 -----END PGP SIGNATURE-----

Merge tag 'v4.16-rc5' into devel

Linux 4.16-rc5 merged into the GPIO devel branch to resolve
a nasty conflict between fixes and devel in the RCAR driver.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-18 17:48:59 +01:00
Mikko Perttunen
1abb081e41 firmware: tegra: Simplify channel management
The Tegra194 BPMP only implements 5 channels (4 to BPMP, 1 to CCPLEX),
and they are not placed contiguously in memory. The current channel
management in the BPMP driver does not support this.

Simplify and refactor the channel management such that only one atomic
transmit channel and one receive channel are supported, and channels
are not required to be placed contiguously in memory. The same
configuration also works on T186 so we end up with less code.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08 14:20:58 +01:00
Linus Torvalds
2120447b5d ARC fixes for 4.16-rc4
- MCIP aka ARconnect fixes for SMP builds [Euginey]
 
  - Preventive fix for SLC (L2 cache) flushing [Euginey]
 
  - Kconfig default fix [Ulf Magnusson]
 
  - trailing semicolon fixes [Luis de Bethencourt]
 
  - other assorted minor fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJamHh7AAoJEGnX8d3iisJeM+MQAL+cIkdRd9NJoPPL66IOgwmi
 68jUkVQ8PSgR2P/sWvwIRTionOG9siu58Q1ygXpPR9SNnSJlyIYIW4Onuoajs+Ii
 TmTwWm8jnKtuPtKMBep8XpYQQ+FRL6sDNn0QLjCnnvqAeE7rTFODSlpBR+jL6ur4
 t2h1wHQem6oas1YRwnKrxxMnfV3KP3TkCS2a/lvmeAAt8xi+ll+9OnzVcSCj7pCJ
 ZToenfH3UAbhAd5T7gWkJv2v00zbHNzKtpdluSW6WBybP1Ib2IxOxEiUlAvxQgpl
 NctvS8Q1uveOPQZHO+fNXsJvf+imP2RdWh5RaOcmm8a4tp8jsR51BScX55usjr/z
 ybg4bzHBV3x9YbZkkW9DKyF9eeZ7hWST8nNoebcHNVjboUeD+wgtV8e3Fvc6bIoo
 /Xkw28y/mZwCs7mBfu1fNOIIiiZDSgz7YeeqzOPBzEYVcHE4VGINwX+9cLXPOsgz
 rmI/Md3buSjrfXPnXTuk1R4fl0WKM5FT/2BJ+IbNU2w6VO1/iKqiBQREH5lBfYAI
 BUikxKNwrJ9+zG8EXFUAEi6gn4dxosxMKJ04CTviwGFc1y6yNsmMgizevFpPUyx7
 9o3z19hHUZLx94QsGHLI7QJe3Kawamu0tmdJvQBgB/eZ9lj6OdkzY48I2lgGezSw
 00e+JPSy6EDi8YrlMki5
 =+Bmc
 -----END PGP SIGNATURE-----

Merge tag 'arc-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:

 - MCIP aka ARconnect fixes for SMP builds [Euginey]

 - preventive fix for SLC (L2 cache) flushing [Euginey]

 - Kconfig default fix [Ulf Magnusson]

 - trailing semicolon fixes [Luis de Bethencourt]

 - other assorted minor fixes

* tag 'arc-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: setup cpu possible mask according to possible-cpus dts property
  ARC: mcip: update MCIP debug mask when the new cpu came online
  ARC: mcip: halt GFRC counter when ARC cores halt
  ARCv2: boot log: fix HS48 release number
  arc: dts: use 'atmel' as manufacturer for at24 in axs10x_mb
  ARC: Fix malformed ARC_EMUL_UNALIGNED default
  ARC: boot log: Fix trailing semicolon
  ARC: dw2 unwind: Fix trailing semicolon
  ARC: Enable fatal signals on boot for dev platforms
  ARCv2: Don't pretend we may set L-bit in STATUS32 with kflag instruction
  ARCv2: cache: fix slc_entire_op: flush only instead of flush-n-inv
2018-03-01 14:32:23 -08:00
Eugeniy Paltsev
f3205de98d ARC: mcip: update MCIP debug mask when the new cpu came online
As of today we use hardcoded MCIP debug mask, so if we launch
kernel via debugger and kick fever cores than HW has all cpus
hang at the momemt of setup MCIP debug mask.

So update MCIP debug mask when the new cpu came online, instead of
use hardcoded MCIP debug mask.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-02-28 10:45:31 -08:00
Eugeniy Paltsev
07423d00a2 ARC: mcip: halt GFRC counter when ARC cores halt
In SMP systems, GFRC is used for clocksource. However by default the
counter keeps running even when core is halted (say when debugging via a
JTAG debugger). This confuses Linux timekeeping and triggers flase RCU stall
splat such as below:

| [ARCLinux]# while true; do ./shm_open_23-1.run-test ; done
| Running with 1000 processes for 1000 objects
| hrtimer: interrupt took 485060 ns
|
| create_cnt: 1000
| Running with 1000 processes for 1000 objects
| [ARCLinux]# INFO: rcu_preempt self-detected stall on CPU
|       2-...: (1 GPs behind) idle=a01/1/0 softirq=135770/135773 fqs=0
| INFO: rcu_preempt detected stalls on CPUs/tasks:
| 	0-...: (1 GPs behind) idle=71e/0/0 softirq=135264/135264 fqs=0
|	2-...: (1 GPs behind) idle=a01/1/0 softirq=135770/135773 fqs=0
|	3-...: (1 GPs behind) idle=4e0/0/0 softirq=134304/134304 fqs=0
|	(detected by 1, t=13648 jiffies, g=31493, c=31492, q=1)

Starting from ARC HS v3.0 it's possible to tie GFRC to state of up-to 4
ARC cores with help of GFRC's CORE register where we set a mask for
cores which state we need to rely on.

We update cpu mask every time new cpu came online instead of using
hardcoded one or using mask generated from "possible_cpus" as we
want it set correctly even if we run kernel on HW which has fewer cores
than expected (or we launch kernel via debugger and kick fever cores
than HW has)

Note that GFRC halts when all cores have halted and thus relies on
programming of Inter-Core-dEbug register to halt all cores when one
halts.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: rewrote changelog]
2018-02-28 10:45:31 -08:00
Baruch Siach
08af112e79 soc: bcm2835: sync firmware properties with downstream
Add latest firmware property tags from the latest Raspberry Pi downstream
kernel. This is needed for the GPIO tags, so we can control the GPIO
multiplexor lines.

Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22 13:46:35 +01:00
Linus Torvalds
fe53d1443a ARM: SoC driver updates for 4.16
A number of new drivers get added this time, along with many low-priority
 bugfixes. The most interesting changes by subsystem are:
 
 bus drivers:
   - Updates to the Broadcom bus interface driver to support newer SoC types
   - The TI OMAP sysc driver now supports updated DT bindings
 
 memory controllers:
   - A new driver for Tegra186 gets added
   - A new driver for the ti-emif sram, to allow relocating
     suspend/resume handlers there
 
 SoC specific:
   - A new driver for Qualcomm QMI, the interface to the modem on MSM SoCs
   - A new driver for power domains on the actions S700 SoC
   - A driver for the Xilinx Zynq VCU logicoreIP
 
 reset controllers:
   - A new driver for Amlogic Meson-AGX
   - various bug fixes
 
 tee subsystem:
   - A new user interface got added to enable asynchronous communication
     with the TEE supplicant.
   - A new method of using user space memory for communication with
     the TEE is added
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJac0fQAAoJEGCrR//JCVIntjEQALc6kflEGJc/FPundbx9V3F/
 b+3+EX/uMnBnKsgZprz9ACPhx5eBH9QWja3A1zmIarb5c+q7zbBZDwhzUb8J8Yg8
 xEb0im7Wx/GcKjUYZVKYBxtz9KjkXDzhrq8IAvPg6ShNcIy/8hq7ZO3iOkGsTDcy
 /PyioWKC5g0dhJgtp91X1kgog5tuTaWOg39uUOqyEzwVu1vYVa4w+eeCzjEd6I//
 68R/zDQ52+hWw6WZGoYOsNYzuriOflnJRnNpwuGhMhLNULBJfWnd4hkqGm4E+hFa
 5dzW6vVAdIqjemFqPzCBT2WB4UG871aZX8DJ9HgnfX+g970nlsm1JY8Ck9MJNJum
 aDkqZG41ArUYzDFWu8vJ2SKsue5lEZp6TEO2mLEVYrdOjOgedj0Zxqmq2DYeigxd
 +ccOVgKJ9SsYw9ft1LkQ5BHCgOh3C7y9Kcg7oBnaEI5OTVvtf5PwEkT2cwbvgxYl
 EVKLhlJ0Af+QXOW8E5JbNQETpYw52DMm6UKHiYn/JCGxB/8J0bgJzImDJI4Dtu2h
 zqJITKJeTepqbfA5pmNfKa+20RhmsktdRCw2NN/QynY7EEtGjHAUVnlpZT2mrDco
 0m62b7Erek/776vJN5ECzE5e6XCs2N0MDE6Anp121C5zEmig/SMBrUosMzP7Jnis
 IDVC/QWkb3u85wK20Vc1
 =yz0k
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "A number of new drivers get added this time, along with many
  low-priority bugfixes. The most interesting changes by subsystem are:

  bus drivers:
   - Updates to the Broadcom bus interface driver to support newer SoC
     types
   - The TI OMAP sysc driver now supports updated DT bindings

  memory controllers:
   - A new driver for Tegra186 gets added
   - A new driver for the ti-emif sram, to allow relocating
     suspend/resume handlers there

  SoC specific:
   - A new driver for Qualcomm QMI, the interface to the modem on MSM
     SoCs
   - A new driver for power domains on the actions S700 SoC
   - A driver for the Xilinx Zynq VCU logicoreIP

  reset controllers:
   - A new driver for Amlogic Meson-AGX
   - various bug fixes

  tee subsystem:
   - A new user interface got added to enable asynchronous communication
     with the TEE supplicant.
   - A new method of using user space memory for communication with the
     TEE is added"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (84 commits)
  of: platform: fix OF node refcount leak
  soc: fsl: guts: Add a NULL check for devm_kasprintf()
  bus: ti-sysc: Fix smartreflex sysc mask
  psci: add CPU_IDLE dependency
  soc: xilinx: Fix Kconfig alignment
  soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv
  soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu
  soc: bcm: brcmstb: Be multi-platform compatible
  soc: brcmstb: biuctrl: exit without warning on non brcmstb platforms
  Revert "soc: brcmstb: Only register SoC device on STB platforms"
  bus: omap: add MODULE_LICENSE tags
  soc: brcmstb: Only register SoC device on STB platforms
  tee: shm: Potential NULL dereference calling tee_shm_register()
  soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver
  dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver
  soc: xilinx: Create folder structure for soc specific drivers
  of: platform: populate /firmware/ node from of_platform_default_populate_init()
  soc: samsung: Add SPDX license identifiers
  soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe()
  tee: shm: don't put_page on null shm->pages
  ...
2018-02-01 16:35:31 -08:00
Thierry Reding
2a8102dfe0 memory: tegra: Create SMMU display groups
Create SMMU display groups for Tegra30, Tegra114, Tegra124 and Tegra210.
This allows the display controllers on these devices to share the same
IOMMU domain using the standard IOMMU group mechanism.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-15 10:12:32 +01:00
Thierry Reding
c641ec6eab soc/tegra: pmc: Consolidate Tegra186 support
Move Tegra186 support to the consolidated PMC driver to reduce some of
the duplication and also gain I/O pad functionality on the new SoC as a
side-effect.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-13 13:06:44 +01:00
Linus Torvalds
fc35c1966e We have two changes to the core framework this time around. The first being a
large change that introduces runtime PM support to the clk framework. Now we
 properly call runtime PM operations on the device providing a clk when the clk
 is in use. This helps on SoCs where the clks provided by a device need
 something to be powered on before using the clks, like power domains or
 regulators. It also helps power those things down when clks aren't in use. The
 other core change is a devm API addition for clk providers so we can get rid of
 a bunch of clk driver remove functions that are just doing
 of_clk_del_provider().
 
 Outside of the core, we have the usual addition of clk drivers and smattering
 of non-critical fixes to existing drivers. The biggest diff is support for
 Mediatek MT2712 and MT7622 SoCs, but those patches really just add a bunch
 of data.
 
 By the way, we're trying something new here where we build the tree up with
 topic branches. We plan to work this into our workflow so that we don't step
 on each other's toes, and so the fixes branch can be merged on an as-needed
 basis.
 
 Core:
  - Runtime PM support for clk providers
  - devm API for of_clk_add_hw_provider()
 
 New Drivers:
  - Mediatek MT2712 and MT7622
  - Renesas R-Car V3M SoC
 
 Updates:
  - Runtime PM support for Samsung exynos5433/exynos4412 providers
  - Removal of clkdev aliases on Samsung SoCs
  - Convert clk-gpio to use gpio descriptors
  - Various driver cleanups to match kernel coding style
  - Amlogic Video Processing Unit VPU and VAPB clks
  - Sigma-delta modulation for Allwinner audio PLLs
  - Allwinner A83t Display clks
  - Support for the second display unit clock on Renesas RZ/G1E
  - Suspend/resume support for Renesas R-Car Gen3 CPG/MSSR
  - New clock ids for Rockchip rk3188 and rk3368 SoCs
  - Various 'const' markings on clk_ops structures
  - RPM clk support on Qualcomm MSM8996/MSM8660 SoCs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJaD3qRAAoJEK0CiJfG5JUlOLgQAKWekgG/IYgcPzPWDYfg8Hwr
 sVVUK7+q7TVfbHsbYVikJuUaxutKZ0onnrYmOalTTyyxqL2E1/rYScnxdYHfcwX8
 cyfHebRHsbh/Xg45ktwjzBkO49nwuppkpXd/V80GSBUZ+lsIVl5DUrrFAZdRUEdr
 CEsAsF9tEWIl+0gqXYNuiKBV7QAYv5BUPrbJQf0PwL6jX0OAhLv+ukfN8BdmYsOb
 rdoqhdgmyHkTuIMqsC/H2yP59aAKBse7wxIYebDiTdbPWfTkC9q927fTs4A02F6L
 sHfLvCpfuB4rOjXy6LSd1gMGWIcjotZai+idHBqtNLLVz6exF1QpUCp+pZjEULbA
 /Sx9lk8A3cYoa8pTu1NrrZbZX17iHkFswqMF3T20nhUN9+Ti597ZEbRcWDcoEZtw
 v2NznOTJ7Mm2SrNHOvDklstggNIGcwiAEePGMo7rJNEQZChpDjQj/gJWKzn0UwL4
 zfk+0EzoejPdvZ5FJUfmlr8Tqk53uw+y7/0xQ6gf8lDviTrzzoeXtJUyumGBiuGx
 RxFywf8n02oLYRJm5hu+0NkC+/bX0Lxg/kwiR6FLBFbBFgkWyp7FGcxhlm6ZiBfe
 0KkPciWslNavn5KhljIkZDbXymbvhhSr9uBEFsyeJueA5q7sSghWloL8Ag1cac3W
 e6swD1ngXtM/t5gjOLhR
 =hC7z
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "We have two changes to the core framework this time around.

  The first being a large change that introduces runtime PM support to
  the clk framework. Now we properly call runtime PM operations on the
  device providing a clk when the clk is in use. This helps on SoCs
  where the clks provided by a device need something to be powered on
  before using the clks, like power domains or regulators. It also helps
  power those things down when clks aren't in use.

  The other core change is a devm API addition for clk providers so we
  can get rid of a bunch of clk driver remove functions that are just
  doing of_clk_del_provider().

  Outside of the core, we have the usual addition of clk drivers and
  smattering of non-critical fixes to existing drivers. The biggest diff
  is support for Mediatek MT2712 and MT7622 SoCs, but those patches
  really just add a bunch of data.

  By the way, we're trying something new here where we build the tree up
  with topic branches. We plan to work this into our workflow so that we
  don't step on each other's toes, and so the fixes branch can be merged
  on an as-needed basis.

  Summary:

  Core:
   - runtime PM support for clk providers
   - devm API for of_clk_add_hw_provider()

  New Drivers:
   - Mediatek MT2712 and MT7622
   - Renesas R-Car V3M SoC

  Updates:
   - runtime PM support for Samsung exynos5433/exynos4412 providers
   - removal of clkdev aliases on Samsung SoCs
   - convert clk-gpio to use gpio descriptors
   - various driver cleanups to match kernel coding style
   - Amlogic Video Processing Unit VPU and VAPB clks
   - sigma-delta modulation for Allwinner audio PLLs
   - Allwinner A83t Display clks
   - support for the second display unit clock on Renesas RZ/G1E
   - suspend/resume support for Renesas R-Car Gen3 CPG/MSSR
   - new clock ids for Rockchip rk3188 and rk3368 SoCs
   - various 'const' markings on clk_ops structures
   - RPM clk support on Qualcomm MSM8996/MSM8660 SoCs"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits)
  clk: stm32h7: fix test of clock config
  clk: pxa: fix building on older compilers
  clk: sunxi-ng: a83t: Fix i2c buses bits
  clk: ti: dra7-atl-clock: fix child-node lookups
  clk: qcom: common: fix legacy board-clock registration
  clk: uniphier: fix DAPLL2 clock rate of Pro5
  clk: uniphier: fix parent of miodmac clock data
  clk: hi3798cv200: correct parent mux clock for 'clk_sdio0_ciu'
  clk: hisilicon: Delete an error message for a failed memory allocation in hisi_register_clkgate_sep()
  clk: hi3660: fix incorrect uart3 clock freqency
  clk: kona-setup: Delete error messages for failed memory allocations
  ARC: clk: fix spelling mistake: "configurarion" -> "configuration"
  clk: cdce925: remove redundant check for non-null parent_name
  clk: versatile: Improve sizeof() usage
  clk: versatile: Delete error messages for failed memory allocations
  clk: ux500: Improve sizeof() usage
  clk: ux500: Delete error messages for failed memory allocations
  clk: spear: Delete error messages for failed memory allocations
  clk: ti: Delete error messages for failed memory allocations
  clk: mmp: Adjust checks for NULL pointers
  ...
2017-11-17 20:04:24 -08:00
Stephen Boyd
7a103f0225 Merge branch 'clk-at91' into clk-next
* clk-at91:
  clk: at91: utmi: set the mainck rate
2017-11-14 10:07:40 -08:00
Ludovic Desroches
92041a9ff0 clk: at91: utmi: set the mainck rate
By default, it is assumed that the UTMI clock is generated from a 12 MHz
reference clock (MAINCK). If it's not the case, the FREQ field of the
SFR_UTMICKTRIM has to be updated to generate the UTMI clock in the
proper way.

The UTMI clock has a fixed rate of 480 MHz. In fact, there is no
multiplier we can configure. The multiplier is managed internally,
depending on the reference clock frequency, to achieve the target of
480 MHz.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Ingo van Lil <inguin@gmx.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-01 23:39:49 -07:00
Timo Alho
f2381f6522 firmware: tegra: Add BPMP debugfs support
Tegra power management firmware running on the co-processor (BPMP)
implements a simple pseudo file system akin to debugfs. The file
system can be used for debugging purposes to examine and change the
status of selected resources controlled by the firmware (such as
clocks, resets, voltages, powergates, ...).

Add support to "mirror" the firmware's file system to debugfs. At
boot, query firmware for a list of all possible files and create
corresponding debugfs entries. Read/write of individual files is
implemented by sending a Message ReQuest (MRQ) that passes the full
file path name and data to firmware via DRAM.

Signed-off-by: Timo Alho <talho@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-19 16:27:56 +02:00
Mikko Perttunen
80d47a91e5 firmware: tegra: Add stubs when BPMP not enabled
Add static inline stubs to bpmp.h when CONFIG_BPMP is not enabled.
This allows building BPMP-related drivers with COMPILE_TEST.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-19 16:27:56 +02:00
Mikko Perttunen
2e1e09ed42 firmware: tegra: Expose tegra_bpmp_mrq_return()
Expose and export the tegra_bpmp_mrq_return() function for use by
drivers outside the core BPMP driver. This function is used to reply to
messages originating from the BPMP, which is required in the thermal
driver.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-19 16:27:55 +02:00
Timo Alho
370d010f0e firmware: tegra: Propagate error code to caller
Response messages from Tegra BPMP firmware contain an error return code
as the first word of payload. The error code is used to indicate
incorrectly formatted request message or use of non-existing resource
(clk, reset, powergate) identifier. Current implementation of
tegra_bpmp_transfer() ignores this code and does not pass it to caller.
Fix this by adding an extra struct member to tegra_bpmp_message and
populate that with return code.

Signed-off-by: Timo Alho <talho@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-17 12:22:00 +02:00
Linus Torvalds
ae46654bcf ARM: SoC driver updates for v4.14
This branch contains platform-related driver updates for ARM and ARM64.
 
 Among them:
 
  - Reset driver updates:
   + New API for dealing with arrays of resets
   + Make unimplemented {de,}assert return success on shared resets
   + MSDKv1 driver
   + Removal of obsolete Gemini reset driver
   + Misc updates for sunxi and Uniphier
 
  - SoC drivers:
   + Platform SoC driver registration on Tegra
   + Shuffle of Qualcomm drivers into a submenu
   + Allwinner A64 support for SRAM
   + Renesas R-Car R3 support
   + Power domains for Rockchip RK3366
 
  - Misc updates and smaller fixes for TEE and memory driver subsystems
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZtdt7AAoJEIwa5zzehBx3EboP/jR2T9lrMavXR1zL48L14yJb
 S+fiJlrX1Kr42UF4PQvsfs+uTqOLmycrPVFkMb6IwoUPzQ9UCOSoiMzYm2b7ZPvt
 uIesHhdM3/xun6wKfieN8GmNA1yDVynTxo0TTYDw5ha7I6s2GHgw0GSFzy3wm0Qg
 KzerAO3gzf3L5XsKR0cai3IXNjHO9ubpFG1ReR09da28nPElP8ggWg0KnqdO76Ch
 BGpFj78EC875ZNqwHgnspUqgGDJnBjig3m/uA4FWA0G9Jl38tCyKTZfUR7cEraoV
 kyCgBlR/UrI8eXVTyEy5k5iTsQ3A1VhX4rGjyH+5NZHTs1yWr4+RDND/qeGl9tSo
 VASuOtH6Rc3vdUDpHPBNAFNQH8fwwDoKf96dvN1tiffsx6LSKb//NyOfkXzKOtR6
 CP5raYfX4YktLtHq0XVTZ/6r3XmLcTHzElR/dCFpQOFcTOYii0pWtfcWouahbZ1w
 dhoBX/dbNq37MfzrxtHN2VTIEHpn2GU7u+ZGkp2ArokD58BAft/M3Xee1cDnF75g
 ZDwe5eNFT8aBZKaY7zwG8cdxiw9kACAivDRwW+zgpfUr39c+d0+QmVfnfJh4EGXK
 Ri6yr2EfBWK6jw3cwkdSyyt7iSzIkB+RiuuD1MjpYhWzAvoDpzqkXYukFGbpXnuy
 vUFHNuP1ocUsRtCs8mm1
 =yBzS
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "This branch contains platform-related driver updates for ARM and ARM64.

  Among them:

   - Reset driver updates:
     + New API for dealing with arrays of resets
     + Make unimplemented {de,}assert return success on shared resets
     + MSDKv1 driver
     + Removal of obsolete Gemini reset driver
     + Misc updates for sunxi and Uniphier

   - SoC drivers:
     + Platform SoC driver registration on Tegra
     + Shuffle of Qualcomm drivers into a submenu
     + Allwinner A64 support for SRAM
     + Renesas R-Car R3 support
     + Power domains for Rockchip RK3366

   - Misc updates and smaller fixes for TEE and memory driver
     subsystems"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set
  soc/tegra: fuse: Add missing semi-colon
  soc/tegra: Restrict SoC device registration to Tegra
  drivers: soc: sunxi: add support for A64 and its SRAM C
  drivers: soc: sunxi: add support for remapping func value to reg value
  drivers: soc: sunxi: fix error processing on base address when claiming
  dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C
  bus: sunxi-rsb: Enable by default for ARM64
  soc/tegra: Register SoC device
  firmware: tegra: set drvdata earlier
  memory: Convert to using %pOF instead of full_name
  soc: Convert to using %pOF instead of full_name
  bus: Convert to using %pOF instead of full_name
  firmware: Convert to using %pOF instead of full_name
  soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC
  soc: mediatek: add header files required for MT7622 SCPSYS dt-binding
  soc: mediatek: reduce code duplication of scpsys_probe across all SoCs
  dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC
  reset: uniphier: add analog amplifiers reset control
  reset: uniphier: add video input subsystem reset control
  ...
2017-09-10 20:40:00 -07:00
Yong Wu
e6dec92308 iommu/mediatek: Add mt2712 IOMMU support
The M4U IP blocks in mt2712 is MTK's generation2 M4U which use the
ARM Short-descriptor like mt8173, and most of the HW registers are
the same.

The difference is that there are 2 M4U HWs in mt2712 while there's
only one in mt8173. The purpose of 2 M4U HWs is for balance the
bandwidth.

Normally if there are 2 M4U HWs, there should be 2 iommu domains,
each M4U has a iommu domain.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-08-22 16:37:58 +02:00