mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-26 21:54:11 +08:00
14d0e1a09f
1314889 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Linus Torvalds
|
14d0e1a09f |
soc: driver updates for 6.12
Nothing particular important in the SoC driver updates, just the usual improvements to for drivers/soc and a couple of subsystems that don't fit anywhere else: - The largest set of updates is for Qualcomm SoC drivers, extending the set of supported features for additional SoCs in the QSEECOM, LLCC and socinfo drivers.a - The ti_sci firmware driver gains support for power managment - The drivers/reset subsystem sees a rework of the microchip sparx5 and amlogic reset drivers to support additional chips, plus a few minor updates on other platforms - The SCMI firmware interface driver gains support for two protocol extensions, allowing more flexible use of the shared memory area and new DT binding properties for configurability. - Mediatek SoC drivers gain support for power managment on the MT8188 SoC and a new driver for DVFS. - The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot and a few bugfixes - The Hisilicon Kunpeng HCCS driver gains support for configuring lanes through sysfs Finally, there are cleanups and minor fixes for drivers/soc, drivers/bus, and drivers/memory, including changing back the .remove_new callback to .remove, as well as a few other updates for freescale (powerpc) soc drivers, NXP i.MX soc drivers, cznic turris platform driver, memory controller drviers, TI OMAP SoC drivers, and Tegra firmware drivers -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc+DsUACgkQYKtH/8kJ UifNWRAA49Ife6ybk8jamM9Bd07kFmHdaad0ttgUtx7HMJBg51+JLNFwTVYM2p6b A1SWCsS+sxP1RBKuhgZrt+sDPAoDlYLQaF1WQB7cs4FXqYpc2Po8BmBili5BV635 Zv/9C9ofsWiWg9pGy0rRFvHW0W48lBoQM61YZzQc85pyEod5RSgji/jUEzvBvhln V3hegw0myBecJ8b7jH9Fjre3gMSC65amlXemkDS/7FGXXA7V3BKmALglJj6BR4RD QtQgFOAe/XGmbOguMvZJvVbMnW8PbmS5k50ppixBPAultHflkdg4DdnIW59yUfK+ Mr98sW8U/LirACX93uwSzBNY1m5cW+GP4DoemxIUIQAvXxR4HroLoJdHS+BfWH+H Pn9dgSZu/dUlxfzTYzvd0B5TUjDGkYubVtQ00PLOWFHNfhZSmCqGl5J5NjgINRCf mBwhvUBYXgvNrOaEnll2kt2ONbxT7WAJAcKdnXKDjG4nPDyXBLRYoE4gro4Iii7+ 1OA7NlInwW+XFfpIIJeYa+AOTgb0/MKdONG+CkUnn6Bc9+B7Xdg0w0VDlmsVbXae fRyaI6XKmyNtmFZM4+gUxIhzvOgYpOoMITQJHcHSYuzWQpsnkkRas9aTCyBSLAd4 D59cQwqtmE9rCfp3A7heMeKCIRtfJzoWnW0bjJAPSccLyJP99rI= =xeCE -----END PGP SIGNATURE----- Merge tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "Nothing particular important in the SoC driver updates, just the usual improvements to for drivers/soc and a couple of subsystems that don't fit anywhere else: - The largest set of updates is for Qualcomm SoC drivers, extending the set of supported features for additional SoCs in the QSEECOM, LLCC and socinfo drivers.a - The ti_sci firmware driver gains support for power managment - The drivers/reset subsystem sees a rework of the microchip sparx5 and amlogic reset drivers to support additional chips, plus a few minor updates on other platforms - The SCMI firmware interface driver gains support for two protocol extensions, allowing more flexible use of the shared memory area and new DT binding properties for configurability. - Mediatek SoC drivers gain support for power managment on the MT8188 SoC and a new driver for DVFS. - The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot and a few bugfixes - The Hisilicon Kunpeng HCCS driver gains support for configuring lanes through sysfs Finally, there are cleanups and minor fixes for drivers/{soc, bus, memory}, including changing back the .remove_new callback to .remove, as well as a few other updates for freescale (powerpc) soc drivers, NXP i.MX soc drivers, cznic turris platform driver, memory controller drviers, TI OMAP SoC drivers, and Tegra firmware drivers" * tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits) soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting() soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped() platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names platform: cznic: turris-omnia-mcu: Document the driver private data structure firmware: turris-mox-rwtm: Document the driver private data structure bus: Switch back to struct platform_driver::remove() soc: qcom: ice: Remove the device_link field in qcom_ice drm/msm/adreno: Setup SMMU aparture for per-process page table firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID firmware: arm_scpi: Check the DVFS OPP count returned by the firmware soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404 soc: qcom: llcc: Flip the manual slice configuration condition dt-bindings: firmware: qcom,scm: Document sm8750 SCM firmware: qcom: uefisecapp: Allow X1E Devkit devices misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent' misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property' soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC ... |
||
Linus Torvalds
|
9c39d5ab45 |
soc: devicetree updates for 6.13
This release adds the devicetree files for an impressive number of new SoC variants, though as expected these are all related to others we already support: - The microchip sam9x7 devicetree is now added, after the device driver and platform code has already made it in. This is likely the last ARMv5 (!) platform to ever get added, updating the 20+ year old at91/sam9 platform wtih DDR3 memory and gigabit ethernet. - On the Apple platform, there are now devicetree files for a number of A-series SoCs in addition to the M-series ones, these are used primarily in phones and tablets, but are closely related to the already supported chips. - Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in older Samsung Galaxy phones. - Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end laptops. - Rockchip RK3528 and RK3576 are new variants of their TV box and Tablet chips, still using the older ARMv8.0 cores from RK3328/RK3399 but with a newer process and other improvements from the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also added, these are just lower-cost versions of their normal counterparts. - TI J742S2 is a feature-reduced version of the J784s4 industrial/automotive SoC, with fewer CPU cores. - Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM (Cortex-A53) core, at this point support is only added for running on the RISC-V side on the LicheeRV Nano board. A total of 92 new .dts files describing individual machines is added, which must be a new record. The majority of these is for the newly added chips above, notably all the Apple phones and tablets. The other new machines include nine industrial/embedded boards with NXP i.MX6 or i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110. As usual there are also many newlyad added features in existing boards as well as cleanups and minor bugfixes. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc92V4ACgkQYKtH/8kJ Uie7+xAA5BIu2fSl+cCCOLdWvNulgYJBZfgOC+1vay3A3zykTR5Hd/X4/GOetqb6 uhCJ7MER0md2PBCdffN0JDuDnvBGdOEbHghsY3iqqwP4ad+bk4+Ib/dxgM0uid3t W2NykLvmXmjFJiwjvMKE4aSPi+lCskLehPC05IIJvM/DplGflIoq7Rf+q5WIvStT K5kpluJBD81oQkfBn7FwVJWeM6OZ1CZg413m0PNMoojd6SzyPVNGnd004qEHfwkv Ra1w9cHM2+zagPrkTrFp0bpxfUYwoXiP8uPq9crXrhgeq4JmQBHuTR0ek+mMC2nI aRgi91za8YPgC8APXks64BBqXCxHVse9n228MpldMAabURez5wMkufNFfQc6yLks AhQxD2joVFS+i/pE8WyFlS3/aopNUzIbqVyIhpYiYBLz8xQBSv7KjqySRufrBEhP lMA548uDQK5p1TRnl8L6cDXdHTN9MbqtREIozBeO20iolHJtqLBcw4erZFhwnJsP 2QQVN9P8AXOE/U/RZcV8Wfm7kUoU4FI29G3XlmUnpBmCHQd3Ql2Xv56gaDaAtb3s hF83uTA8bKjby9Xu0c9JQREeNsLEmI/WwuUWlSEcn1cGBZ5ahg8FMta55H8tpX8O OizWoPviwUar7HFASA/ZvN0KoPgq/a8HWRXT+Q+/xBBqnHshtLk= =Ha1w -----END PGP SIGNATURE----- Merge tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC devicetree updates from Arnd Bergmann: "This release adds the devicetree files for an impressive number of new SoC variants, though as expected these are all related to others we already support: - The microchip sam9x7 devicetree is now added, after the device driver and platform code has already made it in. This is likely the last ARMv5 (!) platform to ever get added, updating the 20+ year old at91/sam9 platform with DDR3 memory and gigabit ethernet. - On the Apple platform, there are now devicetree files for a number of A-series SoCs in addition to the M-series ones, these are used primarily in phones and tablets, but are closely related to the already supported chips. - Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in older Samsung Galaxy phones. - Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end laptops. - Rockchip RK3528 and RK3576 are new variants of their TV box and Tablet chips, still using the older ARMv8.0 cores from RK3328/RK3399 but with a newer process and other improvements from the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also added, these are just lower-cost versions of their normal counterparts. - TI J742S2 is a feature-reduced version of the J784s4 industrial/automotive SoC, with fewer CPU cores. - Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM (Cortex-A53) core, at this point support is only added for running on the RISC-V side on the LicheeRV Nano board. A total of 92 new .dts files describing individual machines is added, which must be a new record. The majority of these is for the newly added chips above, notably all the Apple phones and tablets. The other new machines include nine industrial/embedded boards with NXP i.MX6 or i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110. As usual there are also many newly added features in existing boards as well as cleanups and minor bugfixes" * tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (718 commits) arm64: dts: apm: Remove unused and undocumented "bus_num" property arm: dts: spear13xx: Remove unused and undocumented "pl022,slave-tx-disable" property arm64: dts: amd: Remove unused and undocumented "amd,zlib-support" property arm64: dts: lg131x: Update spi clock properties arm64: dts: seattle: Update spi clock properties arm64: dts: rockchip: use less broad pinctrl for pcie3x1 on Radxa E25 arm64: dts: rockchip: add Radxa ROCK 5C dt-bindings: arm: rockchip: add Radxa ROCK 5C arm64: dts: rockchip: orangepi-5-plus: Enable GPU arm64: dts: rockchip: enable USB3 on NanoPC-T6 arm64: dts: rockchip: adapt regulator nodenames to preferred form arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi 4B arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB arm64: dts: rockchip: Enable HDMI on NanoPi R6C/R6S arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S arm64: dts: rockchip: Enable HDMI on Hardkernel ODROID-M2 arm64: dts: rockchip: Remove non-removable flag from sdmmc on rk3576-sige5 arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer ... |
||
Linus Torvalds
|
79caa6c88a |
asm-generic updates for 6.13
These are a number of unrelated cleanups, generally simplifying the architecture specific header files: - A series from Al Viro simplifies asm/vga.h, after it turns out that most of it can be generalized. - A series from Julian Vetter adds a common version of memcpy_{to,from}io() and memset_io() and changes most architectures to use that instead of their own implementation - A series from Niklas Schnelle concludes his work to make PC style inb()/outb() optional - Nicolas Pitre contributes improvements for the generic do_div() helper - Christoph Hellwig adds a generic version of page_to_phys() and phys_to_page(), replacing the slightly different architecture specific definitions. - Uwe Kleine-Koenig has a minor cleanup for ioctl definitions -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc+Z0gACgkQYKtH/8kJ UicqzA/8CcqVdcWKlFAyiFI62DCkd3iYm/joNK3/JhvUIvVFvY+HI0+XpTeOEN1r dfYBNg/KTVSbia5MEEy28Lk5WdoA3X7p9E8NuYC1ik/qvH3Y0kXDU2NiRcJDwalq u56tGUwDITFUzRo47a4Z53JpV60FlGaUVjuKp1jJiOQkcs/iussVYuti8mNVb1ud 1tf21TEAIywq43IC8CxevIRsBkJBqMhalaGWYgKw3ZTwXdiKaXed6RH7IjPodanN 6b7R6aFEqlT7usFX9vLOYNRGzd3HIueXOT1iqiiGI1lm5u/iutxKH+8eS4q381oN WJL0jQdo4sv2MxtSHYrjpzPRQpSp/qrin29h3PVjwBjZF3i5WvFeTYgfjQEEkqe0 fpTXjUsr5n1F1pGV90DtJHwaD5TxKD4VYFLDRCDGUiAnWPkZ7EYUBL3SA6GqEkXB 1lVRPsEBo0y867/WQcoCZA/x7ANZDI6bDZ6fjumwx8OCZOHZeN6FGtqQJHcVZR5O +nu/j3I8YH1tZGKbA+wliyQwt/T60Oxs62HHcFzFLGakARwUEDYO53IGCJUByFwk kCrgNVvzFklwWpqqyTADqb5lkQKpZr5gIdpst185qttCQkb+EFWiCi9w2inXTjHl 2oCc7Uf0cvoxnhVlJAw73eGTtpqS37KCWK+iNyrQbOfy+hgIv+w= =zEHk -----END PGP SIGNATURE----- Merge tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "These are a number of unrelated cleanups, generally simplifying the architecture specific header files: - A series from Al Viro simplifies asm/vga.h, after it turns out that most of it can be generalized. - A series from Julian Vetter adds a common version of memcpy_{to,from}io() and memset_io() and changes most architectures to use that instead of their own implementation - A series from Niklas Schnelle concludes his work to make PC style inb()/outb() optional - Nicolas Pitre contributes improvements for the generic do_div() helper - Christoph Hellwig adds a generic version of page_to_phys() and phys_to_page(), replacing the slightly different architecture specific definitions. - Uwe Kleine-Koenig has a minor cleanup for ioctl definitions" * tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits) empty include/asm-generic/vga.h sparc: get rid of asm/vga.h asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to vt_buffer.h: get rid of dead code in default scr_...() instances tty: serial: export serial_8250_warn_need_ioport lib/iomem_copy: fix kerneldoc format style hexagon: simplify asm/io.h for !HAS_IOPORT loongarch: Use new fallback IO memcpy/memset csky: Use new fallback IO memcpy/memset arm64: Use new fallback IO memcpy/memset New implementation for IO memcpy and IO memset watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240 __arch_xprod64(): make __always_inline when optimizing for performance ARM: div64: improve __arch_xprod_64() asm-generic/div64: optimize/simplify __div64_const32() lib/math/test_div64: add some edge cases relevant to __div64_const32() asm-generic: add an optional pfn_valid check to page_to_phys asm-generic: provide generic page_to_phys and phys_to_page implementations asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n tty: serial: handle HAS_IOPORT dependencies ... |
||
Linus Torvalds
|
c66fbc6c3d |
OpenRISC updates for 6.13
A single fixup from me: - Fix bug with earlycon being broken due to removal of early_ioremap. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE2cRzVK74bBA6Je/xw7McLV5mJ+QFAmc8xS4ACgkQw7McLV5m J+T9IA/5ASXLsoterJXCo9ds34n9oIoEiur8UcOY0LELCm5M9HP0z62at0IZccX9 Tc+DFl6rCJBwZWn7JmYo8qnkO+hTkAoRDFx+I1WMlzjczOLHdwZ3E26u4/cWrhVd j4eISjk5KIFO2DExIdEXgKWetagcfjgyo44/SU+7PLApNPnAeE6bBu5VYypfy+sd BWPZs+FoFBjszdRHjo1mowxbS1Wa6znhWbELyFAY/5hFWIt+91YHS1rpxDoDPnE+ GUYMIFTJLdXlc0eyGfsjcvcHX08NankY8Betg/6e2jENqO+fQHb7KuYL+cxoTDAv HlIfzJQ6YRnfxB8XSLJvAT/bmqoYQAuVydvoFN/45ogzu1OwizM6e6mGw5ErgYkO kRPXa5IgCbORc3v8Dxd+IZNJ4FzBXQ7BDz0V92FYjtJ3OsQKsVHX/t2dGhd4wmGS ItzmxRp55ufqYkb2Waszvq+dBvuW6gJHHB9k9h0mZKhVEm1V2TisIIpdnE3FF/QA p81cPdvHxsp4mf5w30kIaFMHgKM+6jRUEl6IDTEmOtim02Zu75y1JQE8mFZ1yFZ0 l4KPnhU2hYzXG/eqinzRuyRap2wgIGPAXC+mL4LekL74TqmaEGrTeBOq1z+DnMwz u7dQwLJsbomjJUc17MJcKH3zZ1l7xFZxIEbaFrGaimlRMHHQS7Q= =3/S+ -----END PGP SIGNATURE----- Merge tag 'for-linus' of https://github.com/openrisc/linux Pull OpenRISC update from Stafford Horne: "A single fixup from me: Fix bug with earlycon being broken due to removal of early_ioremap" * tag 'for-linus' of https://github.com/openrisc/linux: openrisc: Implement fixmap to fix earlycon |
||
Linus Torvalds
|
f103749785 |
Microblaze patches for 6.13-rc1
- Export xmb_manager functions - Remove empty #ifndef __ASSEMBLY__ statement - Use str_yes_no() helper in show_cpuinfo() -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZzw3uQAKCRDKSWXLKUoM IapyAJ0TsUChBtA7+FFPYXwfQ2nrbhGytQCeNegQkFHSL/Ray6Tsk4Q1zejixlU= =2mED -----END PGP SIGNATURE----- Merge tag 'microblaze-v6.13' of git://git.monstr.eu/linux-2.6-microblaze Pull microblaze updates from Michal Simek: - Export xmb_manager functions - Remove empty #ifndef __ASSEMBLY__ statement - Use str_yes_no() helper in show_cpuinfo() * tag 'microblaze-v6.13' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: mb: Use str_yes_no() helper in show_cpuinfo() microblaze: Remove empty #ifndef __ASSEMBLY__ statement microblaze: Export xmb_manager functions |
||
Linus Torvalds
|
7e7f65647e |
ipe/stable-6.13 PR 20241119
-----BEGIN PGP SIGNATURE----- iIcEABYIAC8WIQQzmBmZPBN6m/hUJmnyomI6a/yO7QUCZz0KKhEcd3VmYW5Aa2Vy bmVsLm9yZwAKCRDyomI6a/yO7RD5AQDY0KVqHmtmLRaIAXTUX/YSZYfw6pFVIFzv b3YkugWwAAEA/iBdSQCFBK9GnFAhVmKL99T5opHu075vfj2CGdA2Yg0= =EFOk -----END PGP SIGNATURE----- Merge tag 'ipe-pr-20241119' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe Pull IPE update from Fan Wu: "One commit from Colin Ian King, which removes unnecessary error handling code in the IPE boot policy generation helper program" * tag 'ipe-pr-20241119' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe: scripts: ipe: polgen: remove redundant close and error exit path |
||
Linus Torvalds
|
df66aeadd8 |
seccomp update for v6.13-rc1
- Provide stub for !HAVE_ARCH_SECCOMP_FILTER (Linus Walleij) -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZzzEewAKCRA2KwveOeQk uwp6AP98Sv73J57WD09zKPFS7xHqTyWgfemD9M8RPSMIgkudBgD9F3tNRqQ2DD6o IX6Zv18AObJSKAZ95No65GHVRHtomAY= =T7J1 -----END PGP SIGNATURE----- Merge tag 'seccomp-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp update from Kees Cook: - Provide stub for !HAVE_ARCH_SECCOMP_FILTER (Linus Walleij) This will make it easier to port arm32 to the generic entry code. * tag 'seccomp-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: Stub for !HAVE_ARCH_SECCOMP_FILTER |
||
Linus Torvalds
|
18a411cc5d |
EFI updates for v6.13
- Align handling of the compiled-in command line with the core kernel - Measure the initrd into the TPM also when it was loaded via the EFI file I/O protocols - Clean up TPM event log handling - Sanity check the EFI memory attributes table, and apply it after kexec too - Assorted other fixes -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZzxU/QAKCRAwbglWLn0t XIBoAQDAHoTX2/CxsCKHXaJE8C19kN451lgLRtZea5kFCVhq+QD/YDVxfif4OvUM q2Wo5BwmqyUk56qHAW14DWZb2Pl1sgU= =YFm/ -----END PGP SIGNATURE----- Merge tag 'efi-next-for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI updates from Ard Biesheuvel: "Just some cleanups and bug fixes this time around: - Align handling of the compiled-in command line with the core kernel - Measure the initrd into the TPM also when it was loaded via the EFI file I/O protocols - Clean up TPM event log handling - Sanity check the EFI memory attributes table, and apply it after kexec too - Assorted other fixes" * tag 'efi-next-for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: Fix memory leak in efivar_ssdt_load efi/libstub: Take command line overrides into account for loaded files efi/libstub: Fix command line fallback handling when loading files efi/libstub: Parse builtin command line after bootloader provided one x86/efi: Apply EFI Memory Attributes after kexec x86/efi: Drop support for the EFI_PROPERTIES_TABLE efi/memattr: Ignore table if the size is clearly bogus efi/zboot: Fix outdated comment about using LoadImage/StartImage efi/libstub: Free correct pointer on failure libstub,tpm: do not ignore failure case when reading final event log tpm: fix unsigned/signed mismatch errors related to __calc_tpm2_event_size tpm: do not ignore memblock_reserve return value tpm: fix signed/unsigned bug when checking event logs efi/libstub: measure initrd to PCR9 independent of source efi/libstub: remove unnecessary cmd_line_len from efi_convert_cmdline() efi/libstub: fix efi_parse_options() ignoring the default command line |
||
Linus Torvalds
|
fcb3ad4366 |
platform-drivers-x86 for v6.13-1
Highlights: - alienware-wmi: WMAX thermal interface support - amd/hsmp: Split ACPI and platform device based drivers - amd/x3d_vcache: X3D frequency/cache mode switching support - asus-wmi: Thermal policy fixes - intel/pmt: Disable C1 auto-demotion in suspend to allow entering the deepest C-states - intel-hid: Fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1 - intel_scu_ipc: Replace "workaround" with 32-bit IO - panasonic-laptop: Correct *_show() function error handling - p2sb: Gemini Lake P2SB devfn correction - think-lmi: Admin/System certificate authentication support - wmi: Disable WMI devices for shutdown, refactoring continues - x86-android-tablets: Vexia EDU ATLA 10 tablet support - platform/surface: Surface Pro 9 5G (Arm/QCOM) support - Miscellaneous cleanups / refactoring / improvements Expected conflicts: - hsmp driver split into two vs constifying bin_attribute [1] [1] https://lore.kernel.org/all/20241107212645.41252436@canb.auug.org.au/ The following is an automated shortlog grouped by driver: alienware-wmi: - added force module parameters - added platform profile support - Adds support to Alienware x17 R2 - alienware_wmax_command() is now input size agnostic - create_thermal_profile() no longer brute-forces IDs - extends the list of supported models - fixed indentation and clean up - Fix spelling mistake "requieres" -> "requires" - order alienware_quirks[] alphabetically - WMAX interface documentation amd: amd_3d_vcache: - Add AMD 3D V-Cache optimizer driver - Add sysfs ABI documentation amd/hsmp: - Add new error code and error logs - Change generic plat_dev name to hsmp_pdev - Change the error type - Convert amd_hsmp_rdwr() to a function pointer - Create hsmp/ directory - Create separate ACPI, plat and common drivers - Create wrapper function init_acpi() - Make hsmp_pdev static instead of global - mark hsmp_msg_desc_table[] as maybe_unused - Move ACPI code to acpi.c - Move platform device specific code to plat.c - Move structure and macros to header file - Use dev_groups in the driver structure - Use name space while exporting module symbols amd/pmf: - Switch to platform_get_resource() and devm_ioremap_resource() - Use dev_err_probe() to simplify error handling asus-laptop: - prefer strscpy() over strcpy() asus-wmi: - Fix inconsistent use of thermal policies - Use platform_profile_cycle() classmate-laptop: - Replace snprintf in show functions with sysfs_emit compal-laptop: - use sysfs_emit() instead of sprintf() dell-dcdbase: - Replace snprintf in show functions with sysfs_emit Documentation: alienware-wmi: - Describe THERMAL_INFORMATION operation 0x02 eeepc-laptop: - use sysfs_emit() instead of sprintf() hp: hp-bioscfg: - remove redundant if statement intel: - Add 'intel' prefix to the modules automatically intel-hid: - fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1 intel/pmc: - Disable C1 auto-demotion during suspend - Refactor platform resume functions to use cnl_resume() intel/pmt: - allow user offset for PMT callbacks - Correct the typo 'ACCCESS_LOCAL' intel_scu_ipc: - Convert to check for errors first - Don't use "proxy" headers - Replace workaround by 32-bit IO - Save a copy of the entire struct intel_scu_ipc_data - Simplify code with cleanup helpers - Unify the flow in pwr_reg_rdwr() intel/vsec: - Remove a useless mutex MAINTAINERS: - adjust file entry in INTEL TPMI DRIVER - Change AMD PMF driver status to "Supported" - Update ISHTP ECLITE maintainer entry p2sb: - Cache correct PCI bar for P2SB on Gemini Lake panasonic-laptop: - Return errno correctly in show callback surface: aggregator_registry: - Add Surface Pro 9 5G Switch back to struct platform_driver:: - remove() think-lmi: - Add certificate as mechanism - Allow empty admin password - improve check if BIOS account security enabled - Multi-certificate support wmi: - Implement proper shutdown handling - Introduce to_wmi_driver() - Remove wmi_block_list - Replace dev_to_wdev() with to_wmi_device() x86: acer-wmi: - remove unused macros x86-android-tablets: - Add get_i2c_adap_by_handle() helper - Add support for getting i2c_adapter by PCI parent devname() - Add support for Vexia EDU ATLA 10 tablet -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZz3IswAKCRBZrE9hU+XO McdKAQCY9gIuqtHpYK0QIQYMoZOWhpiCzfZ96DDHqt4Wknh6NgD/YY6eESyDokyB 4BkujKwqo3cdGNPjIBy41jnNjekNsw8= =QEd2 -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Ilpo Järvinen: - alienware WMAX thermal interface support - Split ACPI and platform device based amd/hsmp drivers - AMD X3D frequency/cache mode switching support - asus thermal policy fixes - Disable C1 auto-demotion in suspend to allow entering the deepest C-states - Fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1 - Replace intel_scu_ipc "workaround" with 32-bit IO - Correct *_show() function error handling in panasonic-laptop - Gemini Lake P2SB devfn correction - think-lmi Admin/System certificate authentication support - Disable WMI devices for shutdown, refactoring continues - Vexia EDU ATLA 10 tablet support - Surface Pro 9 5G (Arm/QCOM) support - Misc cleanups / refactoring / improvements * tag 'platform-drivers-x86-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (69 commits) platform/x86: p2sb: Cache correct PCI bar for P2SB on Gemini Lake platform/x86: panasonic-laptop: Return errno correctly in show callback Documentation: alienware-wmi: Describe THERMAL_INFORMATION operation 0x02 alienware-wmi: create_thermal_profile() no longer brute-forces IDs alienware-wmi: Adds support to Alienware x17 R2 alienware-wmi: extends the list of supported models alienware-wmi: order alienware_quirks[] alphabetically platform/x86/intel/pmt: allow user offset for PMT callbacks platform/x86/amd/hsmp: Change the error type platform/x86/amd/hsmp: Add new error code and error logs platform/x86/amd: amd_3d_vcache: Add sysfs ABI documentation platform/x86/amd: amd_3d_vcache: Add AMD 3D V-Cache optimizer driver intel-hid: fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1 platform/x86/amd/hsmp: mark hsmp_msg_desc_table[] as maybe_unused platform/x86: asus-wmi: Use platform_profile_cycle() platform/x86: asus-wmi: Fix inconsistent use of thermal policies platform/x86: hp: hp-bioscfg: remove redundant if statement MAINTAINERS: Update ISHTP ECLITE maintainer entry platform/x86: x86-android-tablets: Add support for Vexia EDU ATLA 10 tablet platform/x86: x86-android-tablets: Add support for getting i2c_adapter by PCI parent devname() ... |
||
Linus Torvalds
|
70e8ef2d67 |
media updates for v6.13-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmc8TpAACgkQCF8+vY7k 4RUQug//fmDVv94YOgjjfpHYfJU6imzlcTNcHpQnVFbDNSshEOh5bMwEcvhP69pc 1NxpDuzxAVUgANR09VRG58jevpIm0AROMeG4BV7Ah5BGO8a9YzD/ngZ0QxMZJ3gr 4q3de6JhEGFvNzidLQMaqaQEcmIl7dFd3A7f/+VpPLBZfbhL67cseItRZ0Bwmxh5 yu7ENYFqESuvo7maNPrzRaFz0Z34z0pTvNViEK4ZHnkVYDtTurD4EoAWxUaoQIVH E802RKWdg4sPiTUeeWw0ONeSZR6pw/QOqalqalKKxVrxWPtrhXUxnrdjwn97VM5u H7X5Y4Dkgp86jCjs7aTHfrsAFrlT71XRmbjROwRmwccLXYQeJj0DsHZwYFe4dXx4 MbNo80hhr8/ADRKkioAwe+omNay998cVWvlinMRHqUfdLQcggW4txb0VGNTE56nL BMZ0A05LWuyWqbbejhGmPlj676w5NdK2MCNUtb6ei3TIE1LDeN05t6cfm+1zkfQU 1I6AdkBfPe7vfQtQtFUD/iQIkG3bl07PwGsCfOnzAkLz95Ap7lMyHG51UwllPkUX WGXHQNBVhzoftw5SNPUNAp1GTjPhNFqA1ZaSmBWz8EZazrq/uFMZk3wCAuO1yqI2 Matp/j+KKegEUlkb4bsVoAM/nm8yaWlmxVy5VsmFovKAnbJhy28= =BFNW -----END PGP SIGNATURE----- Merge tag 'media/v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fix from Mauro Carvalho Chehab: - uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in uvc_parse_format * tag 'media/v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in uvc_parse_format |
||
Linus Torvalds
|
9f5a6a1fe6 |
media updates for v6.13-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmc8Q80ACgkQCF8+vY7k 4RX+3g//dMBSmu3uC9OiXyfw3aB8w62RMeieRxSVPMdkiacUm1J8HyzHnXPXIUn3 tfBT9E/YbeFZ+PlrOXRDUi1i8jmN47VuwRe01rxxF/FdlYknC2eGH3Ug9DW90VBh wmZ1kSjyjizwDkKAm+Jc2xynTaX+iInJ4Kzp9RStDZPuaqj2Qzd1qVRk2FJwAYRh 5dTpi0W1PexjxQXDIcnHi/tPapGLSP5PnrunrAJR0tYfp60wrKMaxTO36yJzbnDP MxkF8A+9dWtePRqoPWxPIvnOVu/+Twc730xkQp62qPvwEM2HZRtU7cgQFlWos6p/ ijK2i6sAQslMhQ9oIyKlO7HpXX60rjE3XtdzEtGxBq6DyIqx1riN+OqJB2C4Cdsr 2qUET8aTIisPURw1ecNAbthvLt8tljBe08/eX0GYaWFjALJx3Pds23ahH8hw295N o3SY5NaGmO9Tg6HzYLSwfBmxgGpWDuRic6PDCVKok5mS5D1+uV/tu8fQFiNiFNVe Okufjvo7HtZ3+rWR90b/Udpz/lBB/dceppnUX2iKevrG190VHxEwJ2pQKkfdH9ha LUZQajikiv5rbGxKIGrjrCnjrJ24TC2vCSPhkgOb1r91LUY4RUV61c3hZbH73rzQ 2Ykwvmy+gpE4GEYiJRfSR6KlXdBruMa5FToLUHEK0uBMSlG5k7Q= =25BS -----END PGP SIGNATURE----- Merge tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - removal of the old omap4iss media driver - mantis: remove orphan mantis_core.h - add support for Raspberypi CFE - uvc driver got a co-maintainer - main media tree moved to git://linuxtv.org/media.git - lots of driver cleanups, updates and fixes * tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (233 commits) docs: media: update location of the media patches MAINTAINERS: update location of media main tree media: MAINTAINERS: Add Hans de Goede as USB VIDEO CLASS co-maintainer media: platform: samsung: s5p-jpeg: Remove deadcode media: qcom: camss: Add MSM8953 resources media: dt-bindings: Add qcom,msm8953-camss media: qcom: camss: implement pm domain ops for VFE v4.1 media: platform: exynos4-is: Fix an OF node reference leak in fimc_md_is_isp_available media: adv7180: Also check for "adi,force-bt656-4" media: dt-bindings: adv7180: Document 'adi,force-bt656-4' media: mgb4: Fix inconsistent input/output alignment in loopback mode media: replace obsolete hans.verkuil@cisco.com alias Documentation: media: improve V4L2_CID_MIN_BUFFERS_FOR_*, doc media: vicodec: add V4L2_CID_MIN_BUFFERS_FOR_* controls media: atomisp: Add check for rgby_data memory allocation failure media: atomisp: remove redundant re-checking of err media: atomisp: Fix spelling errors reported by codespell media: atomisp: Remove License information boilerplate media: atomisp: Fix typos in comment media: atomisp: hmm_bo: Fix spelling errors in hmm_bo.h ... |
||
Linus Torvalds
|
b57807cbbf |
hid-for-linus-2024111801
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIVAwUAZzusZKZi849r7WBJAQKH9Q/+Llff1j+bP/W2E987vDy8zfFrMHR1nTrB nJb1mXKCp1AG+HcrrJh+9nVZXaXJtoduJ83wufxZoeK2jT06ij+TXPRW3JJcYooO C1UK8CI6fQBzTzKtDLRdBxv8MVTyuFI8KkBasDQQEJafRSN4rW007zA5B+EftcXe N9eb1+BiSbIMDtFdLw6N7kvDwfUj9iWO34cmH7ahv1Y0mj94OCRylN3p3fsbvkjG N5VP0Dm47X5H3OhS85HuVVskpFeMWBnNnLBFCxSoSELhl9pbXcriNQtUrk+uyHfL ObGrUajJlw6rrlCwugonJ5a6HmpWcfZBaXlvkP1b/q4oAePQ+Zuv0RStvPeqiM07 3m4XJf8kcRhMnUVYKo4nv9kVedK+EKu/HBZQsgTdDlTKV3BXpktt7PRD/WUKZ7yG kr/JWOlJho2Lzg7ky/47aJOgRfaLJzhPx1vSoSHrglB4L+4b+J0wZassc/iTkA0Q 9JS1Jci41oAcMzDW4KMkE2GIyXeTeSUTJH54DAm4+SXwkR1Sgn0K+ogceRc86ooA ZQu8touqvHBrVekC6jaFAA92IekLO5UFmiUcbQ1MHFdjx5Y9nruwKd2DulLV9cb9 XdHZMzT2RSdL1DLh5LlXRhLOSplhg0sUj9/XkCHIMX2GXa+ZNgFEA9VxDYBnB+dJ XZsGAHtgWQg= =J6g1 -----END PGP SIGNATURE----- Merge tag 'hid-for-linus-2024111801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - improvement in the way hid-bpf coexists with specific drivers (others than hid-generic) that are already bound to devices (Benjamin Tissoires) - removal of three way-too-aggressive BUG_ON()s from HID drivers (He Lugang) - assorted cleanups and small code fixes to HID core (Dmitry Torokhov, Yan Zhen, Nathan Chancellor, Andy Shevchenko) - support for Corsair Void headset family (Stuart Hayhurst) - Support for Goodix GT7986U SPI (Charles Wang) - initial vendor-specific driver for Kysona, currently adding support for Kysona M600 (Lode Willems) - other assorted code cleanups and small bugfixes all over the place * tag 'hid-for-linus-2024111801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (40 commits) HID: multitouch: make mt_set_mode() less cryptic HID: hid-goodix-spi: Add OF supports dt-bindings: input: Goodix GT7986U SPI HID Touchscreen HID: hyperv: streamline driver probe to avoid devres issues HID: magicmouse: Apple Magic Trackpad 2 USB-C driver support HID: rmi: Add select RMI4_F3A in Kconfig HID: wacom: Interpret tilt data from Intuos Pro BT as signed values HID: steelseries: Add capacity_level mapping HID: steelseries: Fix battery requests stopping after some time HID: hid-goodix: Fix HID get/set feature operation overwritten problem HID: hid-goodix: Return 0 when receiving an empty HID feature package HID: bpf: drop use of Logical|Physical|UsageRange HID: bpf: Fix Rapoo M50 Plus Silent side buttons HID: bpf: Fix NKRO on Mistel MD770 HID: replace BUG_ON() with WARN_ON() HID: wacom: Set eraser status when either 'Eraser' or 'Invert' usage is set HID: Kysona: add basic online status HID: Kysona: check battery status every 5s using a workqueue HID: Kysona: Add basic battery reporting for Kysona M600 HID: Add IDs for Kysona ... |
||
Linus Torvalds
|
e6de688e93 |
Devicetree updates for v6.13:
Bindings: - Enable dtc "interrupt_provider" warnings for binding examples. Fix the warnings in fsl,mu-msi and ti,sci-inta due to this. - Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and altr,fpga-passive-serial to DT schema format - Add some documentation on the different forms of YAML text blocks which are a constant source of review comments - Fix some schema errors in constraints for arrays - Add compatibles for qcom,sar2130p-pdc and onnn,adt7462 DT core: - Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n - Add some warnings on deprecated address handling - Rework early_init_dt_scan() so the arch can pass in the phys address of the DTB as __pa() is not always valid to use. This fixes a warning for arm64 with kexec. - Add and use some new DT graph iterators for iterating over ports and endpoints - Rework reserved-memory handling to be sized dynamically for fixed regions - Optimize of_modalias() to avoid a strlen() call - Constify struct device_node and property pointers where ever possible -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmc7qaoACgkQ+vtdtY28 YcN54g/+Ifz4hQTSWV+VBhihovMMPiQUdxZ+MfJfPnPcZ7NJzaTf+zqhZyS4wQou v0pdtyR0B1fCM/EvKaYD+1aTTAQFEIT5Dqac+9ePwqaYqSk+yCTxyzW9m+P3rTPV THo8SGRss7T+Rs+2WaUGxphTJItMGIRdbBvoqK+82EdKFXXKw2BSD8tlJTWwbTam 9xkrpUzw7f4FvVY8vVhRyOd5i8/v+FH8D65DMIT6ME9zRn4MzKVzCg6udgYeCBld C2XbV+wnyewtjrN2IX+2uQ2mheb7yJu3AEI3iFR5x/sRrsSLpisxrUl38xOOpxrM XxYtHgE3omjagQ+y+L2PMthlKvhFrXVXIvhUH8xxje5z1Vyq3VMfiABkHlMpAnys 5LY4xEhvqDkPNo65UmjMiHxGW/xtcKsmAZBOp+HLerZfCJIFvl380fi8mNg/Sjvz 7ExCSpzCPsHASZg7QCTplU3BUtg+067Ch/k8Hsn/Og73Pqm3xH4IezQZKwweN9ZT LC6OQBI7C3Yt1hom9qgUcA4H4/aaPxTVV7i0DGuAKh8Lon6SaoX2yFpweUBgbsL/ c9DIW4vbYBIGASxxUbHlNMKvPCKACKmpFXhsnH5Waj+VWSOwsJ8bjGpH8PfMKdFW dyJB/r94GqCGpCW7+FC1qGmXiQJGkCo89pKBVjSf4Kj45ht/76o= =NCYS -----END PGP SIGNATURE----- Merge tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "Bindings: - Enable dtc "interrupt_provider" warnings for binding examples. Fix the warnings in fsl,mu-msi and ti,sci-inta due to this. - Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and altr,fpga-passive-serial to DT schema format - Add some documentation on the different forms of YAML text blocks which are a constant source of review comments - Fix some schema errors in constraints for arrays - Add compatibles for qcom,sar2130p-pdc and onnn,adt7462 DT core: - Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n - Add some warnings on deprecated address handling - Rework early_init_dt_scan() so the arch can pass in the phys address of the DTB as __pa() is not always valid to use. This fixes a warning for arm64 with kexec. - Add and use some new DT graph iterators for iterating over ports and endpoints - Rework reserved-memory handling to be sized dynamically for fixed regions - Optimize of_modalias() to avoid a strlen() call - Constify struct device_node and property pointers where ever possible" * tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits) of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible of/address: Rework bus matching to avoid warnings of: WARN on deprecated #address-cells/#size-cells handling of/fdt: Don't use default address cell sizes for address translation dt-bindings: Enable dtc "interrupt_provider" warnings of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml media: xilinx-tpg: use new of_graph functions fbdev: omapfb: use new of_graph functions gpu: drm: omapdrm: use new of_graph functions ASoC: audio-graph-card2: use new of_graph functions ASoC: audio-graph-card: use new of_graph functions ASoC: test-component: use new of_graph functions of: property: use new of_graph functions of: property: add of_graph_get_next_port_endpoint() of: property: add of_graph_get_next_port() of: module: remove strlen() call in of_modalias() ... |
||
Linus Torvalds
|
80db457e8d |
auxdisplay for v6.13-1
* Move Holtek 16k33 driver to use agnostic i2c_get_match_data() * Miscellaneuous cleanups The following is an automated git shortlog grouped by driver: cfag12864b: - Remove unused functions ht16k33: - Make use of i2c_get_match_data() - Drop explicit initialization of struct i2c_device_id::driver_data to 0 lcd2s: - Drop explicit initialization of struct i2c_device_id::driver_data to 0 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEhiZOUlnC9oKN3n3AmT3/83c5Sy0FAmcrVb0ACgkQmT3/83c5 Sy2FQw/8D/237N73INQrDYBT6CF6vR6qoI7yms3OsOQV6f0WydHbG5dUqE+tXZ2g Axh1S4CKtJaO8PQjS+Tb1GFzzM/N9uIyFG8zQN520wU6CzW7ipvmqs3l2yREQzVz 4/ZrwVhUkDl0//x/Cd0PNGKhiIomszQVjc4TlHzJZXQtdx3Mkh/Xg8yo5QzYQRd5 JjcOW0s8GJd39+dT417oq/4LZE0mYvsEJQeU7RWf7EvkUy6GmWUiIoNOKBVkb6Sz U/PGdyux9sO9+6hH4ziJiaQRi+O9ZbLlNlL8VV++T35G+p1Y6lZGXTRduVQ1ElLz 98m1nrHNCKb6uvmtjDiA1Xlojf06cmpg+v2J+eD4aultIrHRiGgS4ZdRMJj5MoC7 +jyZBYPwNwDmOQAIPWqphVquXRkznvEqfKmfxtohDfsx0QBhdrEIJVtdIpUT1fqk 9a3vok/7TMJM65UE2Qo8omJoztjCf1YAPA5cHFpcr/i8Hl6GsHJP3ojTA8ryVDcQ MkxPI8AkEfOWqqa/amUN+mYh6sS8+rSKcVcKm/r1uV/ncH7CUAaxeWDSc8KT5IMX x/3n4+l8l+ZohAr17OVm+9rBl0KFtH1U3gXC+lkDuuvNmd7NbwBrUJWnop+zVwNb EEUqXU7y8Mljje3GCiUOn3M6FDzpVa4uVp9F7Ty/4Gnerjxj4Ns= =Z6SY -----END PGP SIGNATURE----- Merge tag 'auxdisplay-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay Pull auxdisplay update from Andy Shevchenko: - Move Holtek 16k33 driver to use agnostic i2c_get_match_data() - Miscellaneuous cleanups * tag 'auxdisplay-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay: auxdisplay: Remove unused functions auxdisplay: ht16k33: Make use of i2c_get_match_data() auxdisplay: Drop explicit initialization of struct i2c_device_id::driver_data to 0 |
||
Linus Torvalds
|
38556294b8 |
MMC core:
- Add support for Ultra Capacity SD cards (SDUC, 2TB to 128TB) - Add support for Ultra High-Speed II SD cards (UHS-II) - Use a reset control for pwrseq_simple - Add SD card quirk for broken poweroff notification - Use GFP_NOIO for SD ACMD22 MMC host: - bcm2835: Introduce proper clock handling - mtk-sd: Add support for the Host-Software-Queue interface - mtk-sd: Add support for the mt7988/mt8196 variants - mtk-sd: Fix a couple of error paths in ->probe() - sdhci: Add interface to support UHS-II SD cards - sdhci_am654: Fixup support for changing the signal voltage level - sdhci-cadence: Add support for the Microchip PIC64GX variant - sdhci-esdhc-imx: Add support for eMMC HW-reset - sdhci-msm: Add support for the X1E80100/IPQ5424/SAR2130P/QCS615 variants - sdhci-of-arasan: Add support for eMMC HW-reset - sdhci-pci-gli: Add UHS-II support for the GL9767/GL9755 variants MEMSTICK: - A couple of minor updates -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmc7NnoXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCnQPRAAkxvhptCjKuLBIMBrNZglQElp Ncm8fXDiS72CvLwC3bp7rxognCKLVQGWc8GrxcBOxMSB5eiDyPe6xcLLQ2Zrm4l/ msnfP29VDtmWw3K1iC2Uzo0vlMWYyRFX0OK3fz3d6WL0dE6TXy5adsdy9BmdxGXk vpDgiTWkSZcoT/upuXs8/0N87eSgLUFzZ8uPNP+aHtF4AVWIwhJ3Y1MKqdfGrUlw 7b9bFeh6DelA+jGDxsPsqSwDBh2CDDP3YaPFYf4yyaeTRJmp6DMSEqjDifBa+hDn wkwNGj9bN05HeRN3TfsF/Z22LcaPcbWlLYh8p06h+Ws+R/2KxAXdV3oWnKNLQB9R 5WIdgb7HBD2OS2RymPeHygPPGt6zgxk55UfTBwchg7fHyugXvpcT/JDS2mbPQT4w Ty4s217wBn6Kkt4/8fWhHyG/rKBTq02Etmdery4AAM49M2iPvf+edio53FLnskrq xB8kYn5UZkk9dQ+GseC4+tXe8A1G/sxh/E2aJ/b15Mc9Mh1/BqL3g2532A+z6x5Q 8o4nyztCJhKWtfYxo1slnWzF+Axrz6ZXgVYh5MecMk9EjKVcX6oN+FGpiK/cg3dQ 7FFyzf+YGwdnOhuHhdBG0NTbvKvIRA0rMQ3xvhsfXqCI206j7FZNpWOxXYn36Lgt oZlprarw04AoECCg5Ko= =LGdl -----END PGP SIGNATURE----- Merge tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Add support for Ultra Capacity SD cards (SDUC, 2TB to 128TB) - Add support for Ultra High-Speed II SD cards (UHS-II) - Use a reset control for pwrseq_simple - Add SD card quirk for broken poweroff notification - Use GFP_NOIO for SD ACMD22 MMC host: - bcm2835: Introduce proper clock handling - mtk-sd: Add support for the Host-Software-Queue interface - mtk-sd: Add support for the mt7988/mt8196 variants - mtk-sd: Fix a couple of error paths in ->probe() - sdhci: Add interface to support UHS-II SD cards - sdhci_am654: Fixup support for changing the signal voltage level - sdhci-cadence: Add support for the Microchip PIC64GX variant - sdhci-esdhc-imx: Add support for eMMC HW-reset - sdhci-msm: Add support for the X1E80100/IPQ5424/SAR2130P/QCS615 variants - sdhci-of-arasan: Add support for eMMC HW-reset - sdhci-pci-gli: Add UHS-II support for the GL9767/GL9755 variants MEMSTICK: - A couple of minor updates" * tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (78 commits) mmc: pwrseq_simple: Handle !RESET_CONTROLLER properly mmc: mtk-sd: Fix MMC_CAP2_CRYPTO flag setting mmc: mtk-sd: Fix error handle of probe function mmc: core: Correction a warning caused by incorrect type in assignment for UHS-II mmc: sdhci-esdhc-imx: Update esdhc sysctl dtocv bitmask mmc: sdhci-esdhc-imx: Implement emmc hardware reset mmc: core: Correct type in variable assignment for UHS-II mmc: sdhci-uhs2: correction a warning caused by incorrect type in argument mmc: sdhci-uhs2: Remove unnecessary variables mmc: sdhci-uhs2: Correct incorrect type in argument mmc: sdhci: Make MMC_SDHCI_UHS2 config symbol invisible mmc: sdhci-uhs2: Remove unnecessary NULL check mmc: core: Fix error paths for UHS-II card init and re-init mmc: core: Add error handling of sd_uhs2_power_up() mmc: core: Simplify sd_uhs2_power_up() mmc: bcm2835: Introduce proper clock handling mmc: bcm2835: Fix type of current clock speed dt-bindings: mmc: Add sdhci compatible for QCS615 mmc: core: Use GFP_NOIO in ACMD22 dt-bindings: mmc: sdhci-msm: Add SAR2130P compatible ... |
||
Linus Torvalds
|
75f2b37dd0 |
pmdomain core:
- Set the required dev for a required OPP during genpd attach - Add support for required OPPs to dev_pm_domain_attach_list() pmdomain providers: - ti: Enable GENPD_FLAG_ACTIVE_WAKEUP flag for ti_sci PM domains - mediatek: Add support for MT6735 PM domains - mediatek: Use OF-specific regulator API to get power domain supply - qcom: Add support for the SM8750/SAR2130P/qcs615/qcs8300 rpmhpds pmdomain consumers: - Convert a couple of consumer drivers to *_pm_domain_attach|detach_list() opp core: - Rework and cleanup some code that manages required OPPs - Remove *_opp_attach|detach_genpd() -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmc7Y+QXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCmbrw/9FVdo3+mo6EZne+Zsxc0+3N9G bRwkgyCB8WSFy6MHD1TRyP9u8bFgFDitSxcUGuBW0l9t1le3IcsYwfbTEEZpUkU4 iasPoZoFKA3Akfr7tvQpIpSNh8MIBMFy7CfxWpsfiHlmwrIH6oT6HmlwWwFsbVxh Fv8xA5SOE1KRHq0Aos23h7MizPsav/PYSh/4Ga5l6ZBlm40c16cE0i0M4RRUnoNY FmUBe57HoumDd05ToFR9wrqMEVWbAJHV4xZpZwnfYUhwGrgbxUWI/1FIfwxtob12 OExPr9kiV8/f8Kfp3E3ul0R8q8XYaYZaT3R7nF5QOngLZCCpD5H9aWEcAihUryBh Ol9Wao0Ku1JqLc776bjwf92ozFDtx0yUN/8LXmQgUu+e+MC3eAOrsls+U4731p+Y V80mvBpqn8AbX7LOjJvmbOhK6Qnm0cHo2cs0afBSS5c9RBcCWuEy9d7n8dks6JX2 7H6ySDaKoEEK06V6VzEKdHQoRFkmw95w4n7Ei3OL0cxNLcT1ILGA1+O7PPw+6h4T 3UnSik6szZCBXFFaDsw4J53HZACVZWbkyrk5Dbsigte8lh6e2VI+qd9whd46nuCY Sn4vJ399FJvXBuEIu+8yymGwn/NSpgd6ybpkwdDNJ+fItbes7DQhtxM6k74ANAhf 0irf1o4Yv0S5W+pXBAM= =SpyF -----END PGP SIGNATURE----- Merge tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain updates from Ulf Hansson: "pmdomain core: - Set the required dev for a required OPP during genpd attach - Add support for required OPPs to dev_pm_domain_attach_list() pmdomain providers: - ti: Enable GENPD_FLAG_ACTIVE_WAKEUP flag for ti_sci PM domains - mediatek: Add support for MT6735 PM domains - mediatek: Use OF-specific regulator API to get power domain supply - qcom: Add support for the SM8750/SAR2130P/qcs615/qcs8300 rpmhpds pmdomain consumers: - Convert a couple of consumer drivers to *_pm_domain_attach|detach_list() opp core: - Rework and cleanup some code that manages required OPPs - Remove *_opp_attach|detach_genpd()" * tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (25 commits) pmdomain: qcom: rpmhpd: Add rpmhpd support for SM8750 dt-bindings: power: qcom,rpmpd: document the SM8750 RPMh Power Domains pmdomain: imx: Use of_property_present() for non-boolean properties pmdomain: imx: gpcv2: replace dev_err() with dev_err_probe() pmdomain: ti-sci: Use scope based of_node_put() to simplify code. pmdomain: ti-sci: Add missing of_node_put() for args.np pmdomain: ti-sci: set the GENPD_FLAG_ACTIVE_WAKEUP flag for all PM domains pmdomain: mediatek: Add support for MT6735 pmdomain: qcom: rpmhpd: add support for SAR2130P dt-bindings: power: Add binding for MediaTek MT6735 power controller dt-bindings: power: rpmpd: Add SAR2130P compatible OPP: Drop redundant *_opp_attach|detach_genpd() cpufreq: qcom-nvmem: Convert to dev_pm_domain_attach|detach_list() media: venus: Convert into devm_pm_domain_attach_list() for OPP PM domain drm/tegra: gr3d: Convert into devm_pm_domain_attach_list() OPP: Drop redundant code in _link_required_opps() pmdomain: core: Set the required dev for a required OPP during genpd attach pmdomain: core: Manage the default required OPP from a separate function PM: domains: Support required OPPs in dev_pm_domain_attach_list() OPP: Rework _set_required_devs() to manage a single device per call ... |
||
Linus Torvalds
|
0cea110255 |
power sequencing updates for v6.13-rc1
- extend support for the wcn6855 model in the pwrseq-qcom-wcn driver - make this driver depend on CONFIG_OF=y as it uses some very OF-specific interfaces and depends on phandle parsing -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmc7Ou4ACgkQEacuoBRx 13JohhAA1qSsMSAiMzjx1v46QHxsKvQQatRGjUuqsAIKPNJ73IeZ9h7KmlXJ4Uti GS78mL+kS0Xo3YiHDAMBErk+K3FARbjljcLAKeMb86Ait3gc56nw9/X+osdAvM3x q5gKpT8Gm1zKTaN85beZanmw5/uKc7cBI1+hx2PdPH8tR2e9g8KP2Z5dMG31sGx3 GsyEal/WXT2NppWipXQOgRAQgMPW5yCtXkR4uIprRtrWl4h7rS4mNmC7genb1kKV xDzztqR4MjwKNL+TnfMxPlPJsJSecWMETpVjZEhguACeiRo9oJiBpLqbdOAKEj4+ LjotJSohFEb97W2F/k3ZlyE9gWKyeTq6yhcsUOFVXvLFLYQjSK0z/59yy34zCy3d GD73cuG3O0g8xcU415Nx8Nv7srIIoIWDRKpbhM4HfO8wQXCw4RgHD9jarj9kWU6/ 6phUjgQ+YopVACw/kTG7I0tzFQEXN0IeOVyRAaac4LIrgNktyRbWJi0D/ZdNcg0p fVXPEq0ipsYvMuV+Qj1nrRZKJHQl4DZ4+QjY2aNIB/rvFkX8o4rXah6m9jWYlHtm Y53U8TL0IwYP+Nt+cW4+tX75FnvHuw4dDpqWnUEY/rN9+Cgj7NFvBWFZwdXYytoa AF552LczvcQFyNfPl0jWo/4/Khqhy1hWOb0OWci0Aq8VDEPe6Ps= =IOPC -----END PGP SIGNATURE----- Merge tag 'pwrseq-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull power sequencing updates from Bartosz Golaszewski: - extend support for the wcn6855 model in the pwrseq-qcom-wcn driver - make this driver depend on CONFIG_OF=y as it uses some very OF-specific interfaces and depends on phandle parsing * tag 'pwrseq-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: power: sequencing: qcom-wcn: improve support for wcn6855 power: sequencing: make the QCom PMU pwrseq driver depend on CONFIG_OF |
||
Linus Torvalds
|
131561f2ca |
gpio updates for v6.13-rc1
GPIOLIB core: - use the new mem_is_zero() instead of memchr_inv(s, 0, n) - don't store debounce period twice needlessly - clean-up debugfs handling - remove leftover comments referring to no longer used spinlocks - unduplicate some operations like SRCU locks and initializing GPIO descriptors - constify the sysfs class struct - use lock guards in GPIO sysfs code - update GPIO uAPI internal flags all at once atomically for consistency with other places - modify the behavior of the sysfs interface by no longer exporting lines that are named inside the driver code or board files with the sysfs links bearing the line names as this has for many years been largely unused due to the prevalence of DT, ACPI and firmware nodes over board files and made the API inconsistent - for GPIO interrupt providers: free irqs that are still requested by users when removing the chip GPIO uAPI: - notify user-space about changes to GPIO lines' state (requested, released, reconfigured) triggered from the kernel as well (until now we'd only do this for changes triggered from user-space) - to that end: modify the internal workings of the notification mechanism by switching to an atomic notifier which allows us to send events from atomic context - also to that end store the debounce period in the GPIO descriptor struct and not in the character device context struct - while at it, also cover the corner-case of users introducing changes over sysfs while others watch them via the character device - don't report GPIO lines requested as interrupts as "used" to user-space as it can still request them as GPIOs New drivers: - add a driver for the GPIO functionality of the MFD Congatec Board Controller - add a driver for the PolarFire GPIO controller - add a driver supporting the GPIOs on FTDI FT2232H Driver improvements: - use generic device property accessors instead of OF-specific ones across many GPIO drivers (mpc8xxx, vf610, eic-sprd, davinci, ts4900, xilinx, mvebu) - use devres helpers to simplify error paths and either shrink or entirely remove the driver's remove() callback (grgpio, amdpt, menz127, max730x, ftgpio010, 74x164, ljca) - use helper variables to store the address of pdev->dev and avoid some line-breaks - use device_for_each_child_node_scoped() to avoid having to put the fwnode on breaks or errors (gpio-sim, gpio-dwapb, gpiolib-acpi) - use a scoped bitmap to simplify the code and drop goto labels in gpio-aggregator - drop unneeded Kconfig dependencies on OF_GPIO (grgpio, mveby, xilinx) - add support for new models to gpio-aspeed, gpio-rockchip and gpio-dwapb - clean-up ACPI handling and some other bits in gpio-xgene-sb - replace deprecated PCI functions in pcie-idio-24 and pci-idio-16 - allow to build davinci and mvebu drivers with COMPILE_TEST=y - remove dead code in gpio-mb86s7x - switch back to using platform_driver::remove() (after the conversion to remove_new()) across the GPIO drivers - remove remaining uses of GPIOF_ACTIVE_LOW across the tree and drop this deprecated symbol - convert the gpio-altera driver to no longer pull in the deprecated legacy-of-mm-gpiochip.h header - use of_property_present() instead of of_property_read_bool() in gpiolib-of and gpio-rockchip - allow to build the tegra186 driver on Tegra234 platforms in Kconfig Late fixes: - add a missing return value check after devm_kasprintf() to gpio-grgpio DT bindings: - document the ngpios property of gpio-mmio - add support for a new aspeed model - fix the example for st,nomadik-gpio Other: - kernel doc and comments tweaks - fix typos in TODO - reorder headers alphabetically in some drivers - fix incorrect format specifiers in gpio tools -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmc7INQACgkQEacuoBRx 13Kotg/8DDkhZ01Qc2uR817DjCdbalS0TDr4FYn/XusyeBEgNgQDm/TcfmIMiU4M Dazb7pOXfEc4VJqPTSpvqsTwTyMLN1pi58ZXZZA760rf8O8O+8c/cogVk36QK+IB 3LX/w7JFFME6cC3kZ+mV3a6Cdxb4UIQdv1rWtLX8MjCiJ5+ax33VS0pe67n8sOft A6LeYwFr1ngk9NDg+OrFzExMTCGqk4aUYWiLd8ki3bw5ZMYzLwuenWLONQo3HOP5 QuWQV+wF913mjB53omiZ8heJ7hN3ez071W4rXXPGXn5sAGipqJKWk6Nvx1wRZapD d+6XozBLGNEIcPvWJAWDfxnHmEjVpFyhavc9Id569DcQ0WVLm+CFPkNmp4mgOoOB k8f6R2CA2lheIKTRUk/Lt+Cu2+Za/07bM/WsxL6x/oCXZwL6NA5P+8VoNcBCDKrF PVUz7Jad6FVHkxySqwX4clHLW173pqyG47RJ7KxVv7g6g+YNW0WCM7crS+czRWIq KUT9sumw1dEFlYZ9IGZTuP/Pvur8f17powkS8VuYJ02N1yq3OhQZb52NX8stsmkW P6CsdZe9KRoGQUJp9nYVE5j09oz1gqqdbLdn4Byqg6G50w2U1mLNaWE1rtWLtcTx h7npUNOaX44JafnClFJvv1R9ovkuzgTaymEL4qo3QB6COHdvjlA= =ON7q -----END PGP SIGNATURE----- Merge tag 'gpio-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "Three new drivers, support for some new models in existing ones and lots of various tweaks and improvements across the board (switching to using recommended APIs, code shrink and simplification, etc.). Also a new feature in the character device uAPI where we now notify the user-space about changes triggered by in-kernel users as well, not only when they were done by other user-space agents. Summary: GPIOLIB core: - use the new mem_is_zero() instead of memchr_inv(s, 0, n) - don't store debounce period twice needlessly - clean-up debugfs handling - remove leftover comments referring to no longer used spinlocks - unduplicate some operations like SRCU locks and initializing GPIO descriptors - constify the sysfs class struct - use lock guards in GPIO sysfs code - update GPIO uAPI internal flags all at once atomically for consistency with other places - modify the behavior of the sysfs interface by no longer exporting lines that are named inside the driver code or board files with the sysfs links bearing the line names as this has for many years been largely unused due to the prevalence of DT, ACPI and firmware nodes over board files and made the API inconsistent - for GPIO interrupt providers: free irqs that are still requested by users when removing the chip GPIO uAPI: - notify user-space about changes to GPIO lines' state (requested, released, reconfigured) triggered from the kernel as well (until now we'd only do this for changes triggered from user-space) - to that end: modify the internal workings of the notification mechanism by switching to an atomic notifier which allows us to send events from atomic context - also to that end store the debounce period in the GPIO descriptor struct and not in the character device context struct - while at it, also cover the corner-case of users introducing changes over sysfs while others watch them via the character device - don't report GPIO lines requested as interrupts as "used" to user-space as it can still request them as GPIOs New drivers: - GPIO part of the MFD Congatec Board Controller - PolarFire GPIO controller - GPIOs on FTDI FT2232H Driver improvements: - use generic device property accessors instead of OF-specific ones across many GPIO drivers (mpc8xxx, vf610, eic-sprd, davinci, ts4900, xilinx, mvebu) - use devres helpers to simplify error paths and either shrink or entirely remove the driver's remove() callback (grgpio, amdpt, menz127, max730x, ftgpio010, 74x164, ljca) - use helper variables to store the address of pdev->dev and avoid some line-breaks - use device_for_each_child_node_scoped() to avoid having to put the fwnode on breaks or errors (gpio-sim, gpio-dwapb, gpiolib-acpi) - use a scoped bitmap to simplify the code and drop goto labels in gpio-aggregator - drop unneeded Kconfig dependencies on OF_GPIO (grgpio, mveby, xilinx) - add support for new models to gpio-aspeed, gpio-rockchip and gpio-dwapb - clean-up ACPI handling and some other bits in gpio-xgene-sb - replace deprecated PCI functions in pcie-idio-24 and pci-idio-16 - allow to build davinci and mvebu drivers with COMPILE_TEST=y - remove dead code in gpio-mb86s7x - switch back to using platform_driver::remove() (after the conversion to remove_new()) across the GPIO drivers - remove remaining uses of GPIOF_ACTIVE_LOW across the tree and drop this deprecated symbol - convert the gpio-altera driver to no longer pull in the deprecated legacy-of-mm-gpiochip.h header - use of_property_present() instead of of_property_read_bool() in gpiolib-of and gpio-rockchip - allow to build the tegra186 driver on Tegra234 platforms in Kconfig Late fixes: - add a missing return value check after devm_kasprintf() to gpio-grgpio DT bindings: - document the ngpios property of gpio-mmio - add support for a new aspeed model - fix the example for st,nomadik-gpio Other: - kernel doc and comments tweaks - fix typos in TODO - reorder headers alphabetically in some drivers - fix incorrect format specifiers in gpio tools" * tag 'gpio-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (98 commits) gpio: tegra186: Allow to enable driver on Tegra234 gpio: grgpio: Add NULL check in grgpio_probe tools: gpio: Fix several incorrect format specifiers gpio: mpfs: add CoreGPIO support gpio: rockchip: support new version GPIO gpio: rockchip: change the GPIO version judgment logic gpio: rockchip: explan the format of the GPIO version ID gpiolib: cdev: use !mem_is_zero() instead of memchr_inv(s, 0, n) MAINTAINERS: add gpio driver to PolarFire entry gpio: Get rid of GPIOF_ACTIVE_LOW USB: gadget: pxa27x_udc: Avoid using GPIOF_ACTIVE_LOW pcmcia: soc_common: Avoid using GPIOF_ACTIVE_LOW leds: gpio: Avoid using GPIOF_ACTIVE_LOW Input: gpio_keys_polled - avoid using GPIOF_ACTIVE_LOW Input: gpio_keys - avoid using GPIOF_ACTIVE_LOW gpio: Use of_property_present() for non-boolean properties gpio: mpfs: add polarfire soc gpio support gpio: altera: Drop legacy-of-mm-gpiochip.h header gpio: pcie-idio-24: Replace deprecated PCI functions gpio: pci-idio-16: Replace deprecated PCI functions ... |
||
Linus Torvalds
|
7d75606665 |
pwm: Changes for v6.13-rc1
This pull request prominently contains a new abstraction for PWM waveforms that is more expressive that the legacy one. Compared to the old abstraction it contains a duty_offset member instead of polarity. This new abstraction is already used in an ADC driver merged into the iio tree. So I expect you will get a part of this tree also via the iio pull request for 6.13-rc1 (tag pwm/duty_offset-for-6.13-rc1). Otherwise it's the usual collection of fixes, cleanups and dt doc updates. This time around thanks go to Andy Shevchenko, Clark Wang, Conor Dooley, David Lechner, Dimitri Fedrau, Frank Li, Jun Li, Kelvin Zhang, Krzysztof Kozlowski, Nuno Sa, Shen Lichuan and Trevor Gamblin for code contributions, testing and review. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmc7DoAACgkQj4D7WH0S /k5tEgf/QJY8mAPPZR45dDo+GdUnZAaV85sseOezeApjB6kMYXKsKWoDC0uQ9m40 t7zkR8rXCk84rYSg4fGpcWL12v03n8cXmABkJUsqkUkLCcU/pifKzxanC25IWMH1 DGCW8tev4/NSe2ud9kLmFR/p85aioIW47Az3QH096Wv+Y5ij3v5e8PHBIaSiWHlb gfQI1XWerHSbAZexF132zGZOD/TBWb6djAQKACh5KWBPWB54zK3n3ngxoOCSMKSh Li8nfVyy32mPurLfTqaTaAHg7uGrcCGOVhqnXSQiuUayMlV/T7FX/uwfF/X/YKFm iqIPoYeUhLHmHJkHLACtPzUajkTJbg== =3d9l -----END PGP SIGNATURE----- Merge tag 'pwm/for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux Pull pwm updates from Uwe Kleine-König: "This contains a new abstraction for PWM waveforms that is more expressive that the legacy one. Compared to the old abstraction it contains a duty_offset member instead of polarity. This new abstraction is already used in an ADC driver merged into the iio tree. The new API requires changes to the lowlevel drivers. For now there are two drivers that are converted to the new API (axi-pwmgen and stm32). Converted drivers continue to work with the old API. Drivers not yet converted only work with the older API. Otherwise it's the usual collection of fixes, cleanups and dt doc updates. This time around thanks go to Andy Shevchenko, Clark Wang, Conor Dooley, David Lechner, Dimitri Fedrau, Frank Li, Jun Li, Kelvin Zhang, Krzysztof Kozlowski, Nuno Sa, Shen Lichuan and Trevor Gamblin for code contributions, testing and review" * tag 'pwm/for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: pwm: Assume a disabled PWM to emit a constant inactive output pwm: core: export pwm_get_state_hw() pwm: core: use device_match_name() instead of strcmp(dev_name(... dt-bindings: pwm: adi,axi-pwmgen: Increase #pwm-cells to 3 pwm: imx27: Use clk_bulk_*() API to simplify clock handling pwm: imx27: Workaround of the pwm output bug when decrease the duty cycle pwm: axi-pwmgen: Enable FORCE_ALIGN by default pwm: axi-pwmgen: Rename 0x10 register dt-bindings: pwm: amlogic: Document C3 PWM pwm: axi-pwmgen: Create a dedicated function for getting driver data from a chip pwm: atmel-tcb: Use min() macro pwm: stm32: Fix error checking for a regmap_read() call pwm: Add kernel doc for members added to pwm_ops recently pwm: Reorder symbols in core.c pwm: stm32: Implementation of the waveform callbacks pwm: axi-pwmgen: Implementation of the waveform callbacks pwm: Add tracing for waveform callbacks pwm: Provide new consumer API functions for waveforms pwm: New abstraction for PWM waveforms pwm: Add more locking |
||
Linus Torvalds
|
f2ef39727a |
spi: Updates for v6.13
The only real core work we've got this time around is the completion of the transition to the new host/target naming for the core APIs, Kconfig still needs doing but that's a lot less invasive. Otherwise the big changes are the new drivers that have been added: - Completion of the conversion to spi_alloc_host()/_target() and removal of the old naming. - Cleanups for Rockchip drivers, these brought in a new logging helper in the driver core for warnings during probe. - Support for configuration of the word delay via spidev_test. - Support for AMD HID2 controllers, Apple SPI controller and Realtek SPI-NAND controllers. The Rockchip cleanups -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmc7QdQACgkQJNaLcl1U h9A7KAf+Od8ORLheHKrokFYWEW1zuiR45EjqWylLk835d3TQn/VfLOouRDhOPKLw wmxy5PjjvI+CHa9JY4TXY6iRTCc8By6fkwRWFZN5KApSC2NQriWiqgTSItFfYiLv yUthZjfRhbfSpf6E/0hq4axpfn+6W/MIWUg7Ag08IEU+GhDd+um8gdpBKsP1BAJF s34Fn3oJNoze0Wwcq5tZ91S1MsP+2vGFGIGC2HA7G2GAXjGFqBZUnIL+zjC1US3j XILAoy4Vx4J0Nn+f+zdGL2m5cm6O49ztaKqUxamVFigwM4va5OSOEpcnFMEPZ8HY 013dIg7tiayUTOTcByCpzfMDWuzHig== =jc6e -----END PGP SIGNATURE----- Merge tag 'spi-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The only real core work we've got this time around is the completion of the transition to the new host/target naming for the core APIs, Kconfig still needs doing but that's a lot less invasive. Otherwise the big changes are the new drivers that have been added: - Completion of the conversion to spi_alloc_host()/_target() and removal of the old naming. - Cleanups for Rockchip drivers, these brought in a new logging helper in the driver core for warnings during probe. - Support for configuration of the word delay via spidev_test. - Support for AMD HID2 controllers, Apple SPI controller and Realtek SPI-NAND controllers" * tag 'spi-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (58 commits) spi: imx: support word delay spi: imx: pass struct spi_transfer to prepare_transfer() spi: cs42l43: Add GPIO speaker id support to the bridge configuration spi: Delete useless checks spi: apple: Remove unnecessary .owner for apple_spi_driver spi: spidev_test: add support for word delay spi: apple: Add driver for Apple SPI controller spi: dt-bindings: apple,spi: Add binding for Apple SPI controllers spi: Use of_property_present() for non-boolean properties spi: zynqmp-gqspi: Undo runtime PM changes at driver exit time spi: spi-mem: rtl-snand: Correctly handle DMA transfers spi: tegra210-quad: Avoid shift-out-of-bounds spi: axi-spi-engine: Emit trace events for spi transfers dt-bindings: spi: sprd,sc9860-spi: convert to YAML spi: Replace deprecated PCI functions spi: dt-bindings: samsung: Add a compatible for samsung,exynos8895-spi spi: spi-mem: Add Realtek SPI-NAND controller dt-bindings: spi: Add realtek,rtl9301-snand spi: make class structs const spi: dt-bindings: brcm,bcm2835-aux-spi: Convert to dtschema ... |
||
Linus Torvalds
|
4bd37a902a |
regulator: Updates for v6.13
This was a quite quiet release for regulators on the drivers front, but we do have two small but useful core improvements: - Improve handling of cases where DT platforms specify both DT and init_data based configuration for a single regulator. - A helper of_regulator_get_optional() to simplify writing generic bindings for regulator consumers in subsystems. There's also some YAML conversions for the DT bindings which are a big part of the diffstat. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmc7O2AACgkQJNaLcl1U h9C3Zwf/ZfnNpSjd6hWtsPQROmOXNvVJDvXeyC6ZWQPjBU31VAFt+6rtk/xMVTIp cxaHG3PzeYkIk1VTm6yO5m3/kalIt4ECsJf62sfNNoltRcl0sJExt6ewKF6QjCN7 9OOAANJIWliApPj1ZQ+IIvddsF2Q0IqyioDLX+suGdNmNaZx4KnLP7dIAcluj3/d w+pC/CbrrUy2ScFgxLUm3dH16nV8hYm/F9f5Dsob9AV7IpMN0suMwbAd6uq2+KZT lLUw+kpkASetifhAfCjUGj8PIF+lMwW4WsuWgu4I0qiA9+FRDEyb6f0LQahs3d2G NO98rrcS9kVYaJ1z83KuMHeYBI44sQ== =AihX -----END PGP SIGNATURE----- Merge tag 'regulator-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "This was a quite quiet release for regulators on the drivers front, but we do have two small but useful core improvements: - Improve handling of cases where DT platforms specify both DT and init_data based configuration for a single regulator. - A helper of_regulator_get_optional() to simplify writing generic bindings for regulator consumers in subsystems. There's also some YAML conversions for the DT bindings which are a big part of the diffstat" * tag 'regulator-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: dt-bindings: qcom,rpmh: Correct PM8550VE supplies regulator: Switch back to struct platform_driver::remove() regulator: doc: remove documentation comment for regulator_init regulator: doc: add missing documentation for init_cb regulator: rk808: Restrict DVS GPIOs to the RK808 variant only regulator: rk808: Use dev_err_probe() in the probe path regulator: rk808: Perform trivial code cleanups regulator: dt-bindings: qcom,qca6390-pmu: add more properties for wcn6855 regulator: dt-bindings: lltc,ltc3676: convert to YAML regulator: core: Use fsleep() to get best sleep mechanism regulator: core: remove machine init callback from config regulator: core: add callback to perform runtime init regulator: core: do not silently ignore provided init_data regulator: max5970: Drop unused structs regulator: dt-bindings: vctrl-regulator: convert to YAML regulator: qcom-smd: make smd_vreg_rpm static regulator: Call of_node_put() only once in rzg2l_usb_vbus_regulator_probe() regulator: isl6271a: Drop explicit initialization of struct i2c_device_id::driver_data to 0 regulator: Add devres version of of_regulator_get_optional() regulator: Add of_regulator_get_optional() for pure DT regulator lookup |
||
Linus Torvalds
|
37c7d3538a |
regmap: Updates for v6.13
The main thing for regmap this time around is some improvements of the lockdep annotations which stop some false positives. We also have one new helper for setting a bitmask to the same value, and several test improvements. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmc7OlQACgkQJNaLcl1U h9B9nAf5AQIZ8AddQuudV4SoZbS2TWoGOOgjEXQnY245C4kNMnwJ1rIbHu7WJ/OE oVt7ePo7HW0CzpwIrNvdlV+9J3b+XR6xA1/rAJqI+TTPM3FMn33XGZ+0r+ZDVkBT 83/ZwLDPbRIVhwUgyHl0dIb5/pJddYVmJEDFHmRPY9Z8QQ4WPQn4SZvTfvF4y16C CJAV58A7Ei0MmnrJrGV3lF00qpkWMxdlpJu8TYgC1hM/hv9LAvVMEijuCpNR9NR5 udP+jPe2kA+IIlXEfvoxnJ/x9BgSf6CPLYV2nugFZsdGAfhI8EB3v/SC7gqlGVR7 tu4TR55KIh+lthRyD2uFRrI5GlzFvw== =epDO -----END PGP SIGNATURE----- Merge tag 'regmap-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "The main thing for regmap this time around is some improvements of the lockdep annotations which stop some false positives. We also have one new helper for setting a bitmask to the same value, and several test improvements" * tag 'regmap-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: provide regmap_assign_bits() regmap: irq: Set lockdep class for hierarchical IRQ domains regmap: maple: Provide lockdep (sub)class for maple tree's internal lock regmap: kunit: Fix repeated test param regcache: Improve documentation of available cache types regmap: Specifically test writing 0 as a value to sparse caches regmap-irq: Consistently use memset32() in regmap_irq_thread() |
||
Linus Torvalds
|
856385e0c5 |
linux_kselftest-next-6.13-rc1
kselftest update for Linux 6.13-rc1 -- timers test - removes duplicates defines -- timers test - fixes to improve error reporting -- rtc test - adds check rtc alarm status to alarm test -- resctrl test - adds array overrun checks during iMC config parsing code -- resctrl test - adds array overflow checks when reading strings -- resctrl test - fixes and reorganizing code -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmc7o5wACgkQCwJExA0N QxyY6A//RD3Cvt/9Zt6jmuqKDnXkfM+Ry5CAzm+YYPegCLj+yVnzdps8Juf91vd/ KOmE0GaoTMu+Q3NEiNTTTlihYyTT3rA0JJYhAqfQ9b7m9QgMxSaTGhUDXjq83gXU ImbauuD1O3Sr84jLibdvWkgGfuhShz3a8ds3DzN+4S7xKMRguFsyYA/v4shugHMv X59gnuE2dtIFzHFOWJmTVuU3fyedcCiO6nUeIbaq6OFvz7dLKqMOP20r6YGfHUw+ oc640OwbijhLRHINmXGUV8d0B/kEkvljTXfqHdLUIzHVgvwHR4eMcWN6ErKa/knB Phhm6crhC1CNVk0cFdS/VZweOpIMs2A7oBdvtTs3ANz/7ne1IX39jtyoeONkrcBU jh5wIrSuyHLgM+812RCvagRyJ/yMTKkISJFrQDCKTUJTZ2Iq9vDQVSnXBfcYiVLU Ff7PCtlir2OtvdO3RuT8pmEeFTxBMmnXwr0tZ4N1YDMX1dE/5DQofY57XWYWXVGc usBDpzssZda8K155KJnL9HYTWv4sUwh7I6nF2z95kW6llGFKNtJthqx2sdLNIi27 PltopCXiKYtrL8HB3YY1+Oh3auL8NYlg49+W2J3zkbRCvRyJduVkPbZorqooQyLC 8sjZEzlPCj8RvjzQ+nxzl1xS/wwvB/JC8Hsfv9+GOC+XI0HZaNk= =TIPs -----END PGP SIGNATURE----- Merge tag 'linux_kselftest-next-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest update from Shuah Khan: "timer test: - remove duplicate defines - fixes to improve error reporting rtc test: - check rtc alarm status in alarm test resctrl test: - add array overrun checks during iMC config parsing code and when reading strings - fixes and reorganizing code" * tag 'linux_kselftest-next-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (23 commits) selftests/resctrl: Replace magic constants used as array size selftests/resctrl: Keep results from first test run selftests/resctrl: Do not compare performance counters and resctrl at low bandwidth selftests/resctrl: Use cache size to determine "fill_buf" buffer size selftests/resctrl: Ensure measurements skip initialization of default benchmark selftests/resctrl: Make benchmark parameter passing robust selftests/resctrl: Remove unused measurement code selftests/resctrl: Only support measured read operation selftests/resctrl: Remove "once" parameter required to be false selftests/resctrl: Make wraparound handling obvious selftests/resctrl: Protect against array overflow when reading strings selftests/resctrl: Protect against array overrun during iMC config parsing selftests/resctrl: Fix memory overflow due to unhandled wraparound selftests/resctrl: Print accurate buffer size as part of MBM results selftests/resctrl: Make functions only used in same file static selftests: Add a test mangling with uc_sigmask selftests: Rename sigaltstack to generic signal selftest: rtc: Add to check rtc alarm status for alarm related test selftests:timers: remove local CLOCKID defines selftests: timers: Remove unneeded semicolon ... |
||
Linus Torvalds
|
f89a687aae |
kgdb patches for 6.13
A relatively modest collection of changes: * Adopt kstrtoint() and kstrtol() instead of the simple_strtoXX family for better error checking of user input. * Align the print behavour when breakpoints are enabled and disabled by adopting the current behaviour of breakpoint disable for both. * Remove some of the (rather odd and user hostile) hex fallbacks and require kdb users to prefix with 0x instead. * Tidy up (and fix) control code handling in kdb's keyboard code. This makes the control code handling at the keyboard behave the same way as it does via the UART. * Switch my own entry in MAINTAINERS to my @kernel.org address. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEELzVBU1D3lWq6cKzwfOMlXTn3iKEFAmc7bV4ACgkQfOMlXTn3 iKE9Mw/9G80KzejHGaSbzA17ELmxvCeQYQtnpbOiySpvzmIQWkOT7RBhqvqSD/+b 8tCT1aE/QHgkYRSIGTtCVILMSrJ1v2yJR5yuNOXAQgpwVCKq13hq4t7OFBpd+f2K kiY+UCpOOLb7okhjwT5I8hwI1wiHw9VOfcVq2BbBrcQPSoPfAI3iQ8PXUZHu4uq9 EB2OZskFxnIRtCJWXzEayXwzpD0mI9j0Ab+TEm32X3RU+BF0kGLfRvTKYl9jWkBc jsW4BKGOa+dfO5tu8zhVGxk5pssNeomaBNwRLD2EqtlmQJOkiGEk7qsR8z8aeETx uGbmfa4glrZj1V66bOeq9i+qqoAB9VY4TWw2/KSGOaQYsKHcK58EmSzq5nM0Abex rJbOBslsTYBMxz0z5qW8GyD20WtjgMSGtCmAu7OmlDJJdcksYsy6CY+gkfUsVS87 ZA4U0y8zvpyjMt2EKMS5o0/511bwzFtWtqEmiEBqfkX/NUJanaEBTt943NbnJEgu i8J+62B69G2X6gXjRZdncGC+MTWH/o93wmZk5u7bgdO0Wqk9t/EArILp4P9Ieco9 TpblPvcqEjfzBwkQKGMX5zhiR1YHzQn4sC4SmFUjczwuEjnmN0jEPMappG7bxI1c MEX5mPVQdRHO0N4jN/a7qC5PONbi8gKtnhfmCPbTGPwLF87DOEc= =rlg/ -----END PGP SIGNATURE----- Merge tag 'kgdb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux Pull kgdb updates from Daniel Thompson: "A relatively modest collection of changes: - Adopt kstrtoint() and kstrtol() instead of the simple_strtoXX family for better error checking of user input. - Align the print behavour when breakpoints are enabled and disabled by adopting the current behaviour of breakpoint disable for both. - Remove some of the (rather odd and user hostile) hex fallbacks and require kdb users to prefix with 0x instead. - Tidy up (and fix) control code handling in kdb's keyboard code. This makes the control code handling at the keyboard behave the same way as it does via the UART. - Switch my own entry in MAINTAINERS to my @kernel.org address" * tag 'kgdb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: kdb: fix ctrl+e/a/f/b/d/p/n broken in keyboard mode MAINTAINERS: Use Daniel Thompson's korg address for kgdb work kdb: Fix breakpoint enable to be silent if already enabled kdb: Remove fallback interpretation of arbitrary numbers as hex trace: kdb: Replace simple_strtoul with kstrtoul in kdb_ftdump kdb: Replace the use of simple_strto with safer kstrto in kdb_main |
||
Linus Torvalds
|
aad3a0d084 |
ftrace updates for v6.13:
- Merged tag ftrace-v6.12-rc4 There was a fix to locking in register_ftrace_graph() for shadow stacks that was sent upstream. But this code was also being rewritten, and the locking fix was needed. Merging this fix was required to continue the work. - Restructure the function graph shadow stack to prepare it for use with kretprobes With the goal of merging the shadow stack logic of function graph and kretprobes, some more restructuring of the function shadow stack is required. Move out function graph specific fields from the fgraph infrastructure and store it on the new stack variables that can pass data from the entry callback to the exit callback. Hopefully, with this change, the merge of kretprobes to use fgraph shadow stacks will be ready by the next merge window. - Make shadow stack 4k instead of using PAGE_SIZE. Some architectures have very large PAGE_SIZE values which make its use for shadow stacks waste a lot of memory. - Give shadow stacks its own kmem cache. When function graph is started, every task on the system gets a shadow stack. In the future, shadow stacks may not be 4K in size. Have it have its own kmem cache so that whatever size it becomes will still be efficient in allocations. - Initialize profiler graph ops as it will be needed for new updates to fgraph - Convert to use guard(mutex) for several ftrace and fgraph functions - Add more comments and documentation - Show function return address in function graph tracer Add an option to show the caller of a function at each entry of the function graph tracer, similar to what the function tracer does. - Abstract out ftrace_regs from being used directly like pt_regs ftrace_regs was created to store a partial pt_regs. It holds only the registers and stack information to get to the function arguments and return values. On several archs, it is simply a wrapper around pt_regs. But some users would access ftrace_regs directly to get the pt_regs which will not work on all archs. Make ftrace_regs an abstract structure that requires all access to its fields be through accessor functions. - Show how long it takes to do function code modifications When code modification for function hooks happen, it always had the time recorded in how long it took to do the conversion. But this value was never exported. Recently the code was touched due to new ROX modification handling that caused a large slow down in doing the modifications and had a significant impact on boot times. Expose the timings in the dyn_ftrace_total_info file. This file was created a while ago to show information about memory usage and such to implement dynamic function tracing. It's also an appropriate file to store the timings of this modification as well. This will make it easier to see the impact of changes to code modification on boot up timings. - Other clean ups and small fixes -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZztrUxQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qnnNAQD6w4q9VQ7oOE2qKLqtnj87h4c1GqKn SPkpEfC3n/ATEAD/fnYjT/eOSlHiGHuD/aTA+U/bETrT99bozGM/4mFKEgY= =6nCa -----END PGP SIGNATURE----- Merge tag 'ftrace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ftrace updates from Steven Rostedt: - Restructure the function graph shadow stack to prepare it for use with kretprobes With the goal of merging the shadow stack logic of function graph and kretprobes, some more restructuring of the function shadow stack is required. Move out function graph specific fields from the fgraph infrastructure and store it on the new stack variables that can pass data from the entry callback to the exit callback. Hopefully, with this change, the merge of kretprobes to use fgraph shadow stacks will be ready by the next merge window. - Make shadow stack 4k instead of using PAGE_SIZE. Some architectures have very large PAGE_SIZE values which make its use for shadow stacks waste a lot of memory. - Give shadow stacks its own kmem cache. When function graph is started, every task on the system gets a shadow stack. In the future, shadow stacks may not be 4K in size. Have it have its own kmem cache so that whatever size it becomes will still be efficient in allocations. - Initialize profiler graph ops as it will be needed for new updates to fgraph - Convert to use guard(mutex) for several ftrace and fgraph functions - Add more comments and documentation - Show function return address in function graph tracer Add an option to show the caller of a function at each entry of the function graph tracer, similar to what the function tracer does. - Abstract out ftrace_regs from being used directly like pt_regs ftrace_regs was created to store a partial pt_regs. It holds only the registers and stack information to get to the function arguments and return values. On several archs, it is simply a wrapper around pt_regs. But some users would access ftrace_regs directly to get the pt_regs which will not work on all archs. Make ftrace_regs an abstract structure that requires all access to its fields be through accessor functions. - Show how long it takes to do function code modifications When code modification for function hooks happen, it always had the time recorded in how long it took to do the conversion. But this value was never exported. Recently the code was touched due to new ROX modification handling that caused a large slow down in doing the modifications and had a significant impact on boot times. Expose the timings in the dyn_ftrace_total_info file. This file was created a while ago to show information about memory usage and such to implement dynamic function tracing. It's also an appropriate file to store the timings of this modification as well. This will make it easier to see the impact of changes to code modification on boot up timings. - Other clean ups and small fixes * tag 'ftrace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (22 commits) ftrace: Show timings of how long nop patching took ftrace: Use guard to take ftrace_lock in ftrace_graph_set_hash() ftrace: Use guard to take the ftrace_lock in release_probe() ftrace: Use guard to lock ftrace_lock in cache_mod() ftrace: Use guard for match_records() fgraph: Use guard(mutex)(&ftrace_lock) for unregister_ftrace_graph() fgraph: Give ret_stack its own kmem cache fgraph: Separate size of ret_stack from PAGE_SIZE ftrace: Rename ftrace_regs_return_value to ftrace_regs_get_return_value selftests/ftrace: Fix check of return value in fgraph-retval.tc test ftrace: Use arch_ftrace_regs() for ftrace_regs_*() macros ftrace: Consolidate ftrace_regs accessor functions for archs using pt_regs ftrace: Make ftrace_regs abstract from direct use fgragh: No need to invoke the function call_filter_check_discard() fgraph: Simplify return address printing in function graph tracer function_graph: Remove unnecessary initialization in ftrace_graph_ret_addr() function_graph: Support recording and printing the function return address ftrace: Have calltime be saved in the fgraph storage ftrace: Use a running sleeptime instead of saving on shadow stack fgraph: Use fgraph data to store subtime for profiler ... |
||
Linus Torvalds
|
8f7c8b88bd |
sched_ext: Change for v6.13
- Improve the default select_cpu() implementation making it topology aware and handle WAKE_SYNC better. - set_arg_maybe_null() was used to inform the verifier which ops args could be NULL in a rather hackish way. Use the new __nullable CFI stub tags instead. - On Sapphire Rapids multi-socket systems, a BPF scheduler, by hammering on the same queue across sockets, could live-lock the system to the point where the system couldn't make reasonable forward progress. This could lead to soft-lockup triggered resets or stalling out bypass mode switch and thus BPF scheduler ejection for tens of minutes if not hours. After trying a number of mitigations, the following set worked reliably: - Injecting artificial cpu_relax() loops in two places while sched_ext is trying to turn on the bypass mode. - Triggering scheduler ejection when soft-lockup detection is imminent (a quarter of threshold left). While not the prettiest, the impact both in terms of code complexity and overhead is minimal. - A common complaint on the API is the overuse of the word "dispatch" and the confusion around "consume". This is due to how the dispatch queues became more generic over time. Rename the affected kfuncs for clarity. Thanks to BPF's compatibility features, this change can be made in a way that's both forward and backward compatible. The compatibility code will be dropped in a few releases. - Pull sched_ext/for-6.12-fixes to receive a prerequisite change. Other misc changes. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZztuXA4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGePUAP4nFTDaUDngVlxGv5hpYz8/Gcv1bPsWEydRRmH/ 3F+pNgEAmGIGAEwFYfc9Zn8Kbjf0eJAduf2RhGRatQO6F/+GSwo= =AcyC -----END PGP SIGNATURE----- Merge tag 'sched_ext-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext updates from Tejun Heo: - Improve the default select_cpu() implementation making it topology aware and handle WAKE_SYNC better. - set_arg_maybe_null() was used to inform the verifier which ops args could be NULL in a rather hackish way. Use the new __nullable CFI stub tags instead. - On Sapphire Rapids multi-socket systems, a BPF scheduler, by hammering on the same queue across sockets, could live-lock the system to the point where the system couldn't make reasonable forward progress. This could lead to soft-lockup triggered resets or stalling out bypass mode switch and thus BPF scheduler ejection for tens of minutes if not hours. After trying a number of mitigations, the following set worked reliably: - Injecting artificial cpu_relax() loops in two places while sched_ext is trying to turn on the bypass mode. - Triggering scheduler ejection when soft-lockup detection is imminent (a quarter of threshold left). While not the prettiest, the impact both in terms of code complexity and overhead is minimal. - A common complaint on the API is the overuse of the word "dispatch" and the confusion around "consume". This is due to how the dispatch queues became more generic over time. Rename the affected kfuncs for clarity. Thanks to BPF's compatibility features, this change can be made in a way that's both forward and backward compatible. The compatibility code will be dropped in a few releases. - Other misc changes * tag 'sched_ext-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (21 commits) sched_ext: Replace scx_next_task_picked() with switch_class() in comment sched_ext: Rename scx_bpf_dispatch[_vtime]_from_dsq*() -> scx_bpf_dsq_move[_vtime]*() sched_ext: Rename scx_bpf_consume() to scx_bpf_dsq_move_to_local() sched_ext: Rename scx_bpf_dispatch[_vtime]() to scx_bpf_dsq_insert[_vtime]() sched_ext: scx_bpf_dispatch_from_dsq_set_*() are allowed from unlocked context sched_ext: add a missing rcu_read_lock/unlock pair at scx_select_cpu_dfl() sched_ext: Clarify sched_ext_ops table for userland scheduler sched_ext: Enable the ops breather and eject BPF scheduler on softlockup sched_ext: Avoid live-locking bypass mode switching sched_ext: Fix incorrect use of bitwise AND sched_ext: Do not enable LLC/NUMA optimizations when domains overlap sched_ext: Introduce NUMA awareness to the default idle selection policy sched_ext: Replace set_arg_maybe_null() with __nullable CFI stub tags sched_ext: Rename CFI stubs to names that are recognized by BPF sched_ext: Introduce LLC awareness to the default idle selection policy sched_ext: Clarify ops.select_cpu() for single-CPU tasks sched_ext: improve WAKE_SYNC behavior for default idle CPU selection sched_ext: Use btf_ids to resolve task_struct sched/ext: Use tg_cgroup() to elieminate duplicate code sched/ext: Fix unmatch trailing comment of CONFIG_EXT_GROUP_SCHED ... |
||
Linus Torvalds
|
7586d52765 |
cgroup: Changes for v6.13
- cpu.stat now also shows niced CPU time. - Freezer and cpuset optimizations. - Other misc changes. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZztlgg4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGbohAQDE/enqpAX9vSOpQPne4ZzgcPlGTrCwBcka3Z5z 4aOF0AD/SmdjcJ/EULisD/2O27ovsGAtqDjngrrZwNUTbCNkTQQ= =pKyo -----END PGP SIGNATURE----- Merge tag 'cgroup-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: - cpu.stat now also shows niced CPU time - Freezer and cpuset optimizations - Other misc changes * tag 'cgroup-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup/cpuset: Disable cpuset_cpumask_can_shrink() test if not load balancing cgroup/cpuset: Further optimize code if CONFIG_CPUSETS_V1 not set cgroup/cpuset: Enforce at most one rebuild_sched_domains_locked() call per operation cgroup/cpuset: Revert "Allow suppression of sched domain rebuild in update_cpumasks_hier()" MAINTAINERS: remove Zefan Li cgroup/freezer: Add cgroup CGRP_FROZEN flag update helper cgroup/freezer: Reduce redundant traversal for cgroup_freeze cgroup/bpf: only cgroup v2 can be attached by bpf programs Revert "cgroup: Fix memory leak caused by missing cgroup_bpf_offline" selftests/cgroup: Fix compile error in test_cpu.c cgroup/rstat: Selftests for niced CPU statistics cgroup/rstat: Tracking cgroup-level niced CPU time cgroup/cpuset: Fix spelling errors in file kernel/cgroup/cpuset.c |
||
Linus Torvalds
|
d6b6d39054 |
workqueue: Changes for v6.13
- Maximum concurrency limit of 512 which was set a long time ago is too low now. A legitimate use (BPF cgroup release) of system_wq could saturate it under stress test conditions leading to false dependencies and deadlocks. While the offending use was switched to a dedicated workqueue, use the opportunity to bump WQ_MAX_ACTIVE four fold and document that system workqueue shouldn't be saturated. Workqueue should add at least a warning mechanism for cases where system workqueues are saturated. - Recent workqueue updates to support more flexible execution topology made unbound workqueues use per-cpu worker pool frontends which pushed up workqueue flush overhead. As consecutive CPUs are likely to be pointing to the same worker pool, reduce overhead by switching locks only when necessary. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZztfbQ4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGcaOAP9nlm5gKnY4pqQeohxfE9uRoUJY/isbuk0z2ZbB +u2AXQD/ZX16MZm1WOdJ3kcj9bxEbJerW1twus951X6+2tSnRAQ= =mBeG -----END PGP SIGNATURE----- Merge tag 'wq-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue updates from Tejun Heo: - The maximum concurrency limit of 512 which was set a long time ago is too low now. A legitimate use (BPF cgroup release) of system_wq could saturate it under stress test conditions leading to false dependencies and deadlocks. While the offending use was switched to a dedicated workqueue, use the opportunity to bump WQ_MAX_ACTIVE four fold and document that system workqueue shouldn't be saturated. Workqueue should add at least a warning mechanism for cases where system workqueues are saturated. - Recent workqueue updates to support more flexible execution topology made unbound workqueues use per-cpu worker pool frontends which pushed up workqueue flush overhead. As consecutive CPUs are likely to be pointing to the same worker pool, reduce overhead by switching locks only when necessary. * tag 'wq-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Reduce expensive locks for unbound workqueue workqueue: Adjust WQ_MAX_ACTIVE from 512 to 2048 workqueue: doc: Add a note saturating the system_wq is not permitted |
||
Linus Torvalds
|
a0e752bda2 |
Probes update for v6.13:
Kprobes cleanups. Functionality does not change. - kprobes: Cleanup the config comment Adjust #endif comments. - kprobes: Cleanup collect_one_slot() and __disable_kprobe() Make fail fast to reduce code nested level. - kprobes: Use struct_size() in __get_insn_slot() Use struct_size() to avoid special macro. - x86/kprobes: Cleanup kprobes on ftrace code Use macro instead of direct field access/magic number, and avoid redundant instruction pointer setting. -----BEGIN PGP SIGNATURE----- iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmc6vhwbHG1hc2FtaS5o aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bxowIALFYrdLV2ofWRy7/lNkP 6Bv1DkBQ/Xy/ABZ4lAqdgTZrf7Cz8TdPZUL1UOowxW3Cl09PYcpqlUlw/XldvI5j fukkwL9rXNgJfYbau+QG9E5c7mNakexDLBKCZGvnDDuKj0f1aauhwZmpJbNgz1Y6 dUgfFgDJXSArnVKxfZvOhL1tbxYPJUhzNc339p8PVD8r/OUKEZo2EReds3DM40Zq wtwyKqWmawTjRud0ZtgkaWiK1d+QKa07h+GnXi1wUy98A2yGp3fcLuxvjBUMqsCD uzWkY3MikXIZJ/ijxUsMGBRisD4ozqozlQ4wIxCuahRntl9b/d9jXqKY7RTvy6Vw r+Y= =n4ST -----END PGP SIGNATURE----- Merge tag 'probes-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes updates from Masami Hiramatsu: "Kprobes cleanups. Functionality does not change. - kprobes: Cleanup the config comment Adjust #endif comments. - kprobes: Cleanup collect_one_slot() and __disable_kprobe() Make fail fast to reduce code nested level. - kprobes: Use struct_size() in __get_insn_slot() Use struct_size() to avoid special macro. - x86/kprobes: Cleanup kprobes on ftrace code Use macro instead of direct field access/magic number, and avoid redundant instruction pointer setting" * tag 'probes-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: x86/kprobes: Cleanup kprobes on ftrace code kprobes: Use struct_size() in __get_insn_slot() kprobes: Cleanup collect_one_slot() and __disable_kprobe() kprobes: Cleanup the config comment |
||
Linus Torvalds
|
aa44f41470 |
Livepatching changes for 6.13
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmc7MNgACgkQUqAMR0iA lPKrRA/+MOGNP1YgLZ7Hql9RWqd8uNL5llFrN5dViYR03bZc+0sqSL0VO5dfhvyD 3L/EzI0E0Ne6E+cG5odo3AnUqU55ZlHEhMxz0vlxHQMCP8zXw/5d5s03JZEPaaD0 v4F88fqJNNcAeHbNnURsY8r6EjPwZqa7a8yV6mHm52CknlxhYkapwe28oXGhdrfA TAW8iXxYK4MxeITTjyAsPfe1LtTNm0uzeRdCriQZVXycFnN9ffE4EcrB7+HgwsRk cbemBiXXJ3/HE3he/MuFmwtI8A26Awcqc8Cj09VzMIDUFkZ2gSP5aVdRxM8u2lSQ yNAjXWnD4EPh+aJm1c0z3tihvcT55hX201Mlg8gR1QdOoAyCr3nA5wiodqnmyX1d edGulexXuoi2sZlMYHFDVeLdn+3CC7fIF6bOxLC8LHBbZBOAaxZDID0Irp9CGhHP OkDvtAfm6orEX3/MX0blo4Q1mYlgQvG05lP7aU4DRoPk7BZ/r23hcjHpwpxhNneu kQukflS8hmrAnUMm8+ttSvF/o0C76GIrmj1FM/aDtwcuB/9DNlC3DDuWcq/Pc79a 7W6dtAeOdGr+KoSmyfH903fZF6uJEn1A3tzFsVhVAqcpUWB3ENw7Uh91OcTxHoOE AYnblvTRSJSxhjZ5fP35wM9oSwyh9rB/bd6lY2ms0dW0RU7NXy0= =Zf0e -----END PGP SIGNATURE----- Merge tag 'livepatching-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching update from Petr Mladek: - A new selftest for livepatching of a kprobed function * tag 'livepatching-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: selftests: livepatch: test livepatching a kprobed function selftests: livepatch: save and restore kprobe state selftests: livepatch: rename KLP_SYSFS_DIR to SYSFS_KLP_DIR |
||
Linus Torvalds
|
7d66d3ab13 |
printk changes for 6.13
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmc7PG8ACgkQUqAMR0iA lPKJmg//VqbNkf+RW22U0LJ/BTkWLuV9af6WGRE2E7LFcZdzIhJz7YKkzEo2FkQW 9i/SajjbKOWJ7wsG6TgX4rbQbK27lTrmpctiJAg9NehuF0IjvJ3xb/no+MQnlqts OtD6icHs6WLeUhctz0njXMyn6W2zhNnIEIZy+ZLmg1hPdGugyoYkSxegY+7D1kse OKNMpC//2WwtKbcFxM/wust+WeWXRJ2Qby9WpM1ELYs8N+OWY3xX76h0H0rzN5J8 G+T9sHLnytETczZMcoB+2I2WJuXsREXjgRC0s2ZYn3AFpwpq/+ULaR8k0eGyLiCJ /MePtV70ArUfIzVCMShFfdaX5+V8fAXEQznuAXkLbO1t/7Vd8jIKCk00INvRhzyB kSRYC55QoRe43+Zxhe7vyqvj0o3ovZFjVIZ7lEJOSnoqB26N923j/eIPN1Aq4e1I mjWim6kJ+QvW+dfxA9iy115IKXKrf3qe2p16ayzcI9O/JyUw+Vseyqh+n2I0/gUQ Ui6fV8tgu5tBkvhXgLYQDPFQ9EynanLdjOGQxxIitlmZheOT2B+IHU/699VrOacN yOnU+vPIDkZHEgGyw29Qp0kO5msC4DB6zq7PQLCHMSnmvULENgYDvkUNfnE6N6fn csYYha2gVG4mdsL+WyZKDEhw80vsBKkIn0Fx9ntRZOBiHEDZ5UU= =89Bg -----END PGP SIGNATURE----- Merge tag 'printk-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Print more precise information about the printk log buffer memory usage. - Make sure that the sysrq title is shown on the console even when deferred. - Do not enable earlycon by `console=` which is meant to disable the default console. * tag 'printk-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: add dummy printk_force_console_enter/exit helpers tty: sysrq: Use printk_force_console context on __handle_sysrq printk: Introduce FORCE_CON flag printk: Improve memory usage logging during boot init: Don't proxy `console=` to earlycon |
||
Linus Torvalds
|
c3cda60e83 |
Another moderately busy cycle in docsland:
- Work on Chinese translations has picked up again. Happily, they are maintaining the existing translations and not just adding new ones. - Some maintenance of the Japanese and Italian translations as well. - The removal of the venerable "dontdiff" file. It has long outlived its usefulness and contained entries ("parse.*") that would actively mask actual source change. - The addition of enforcement information to the code-of-conduct documentation. Along with some build-system fixes and a lot of typo and language fixes. -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmc7eD4PHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5YSp4H/2zknNZNhxAtWbF1L/MprjVgh5OtS0xEI8SR Klks8pHm9Dg5sg3EciJ9Jt7C3ZdPANOb7K4ykL2w2TKLgZbIMUa6FIqKbASqbryX 0t3nTn0gvkVMEtLlNLw4M1QIUox55fxLKUMV0MxcTAkvmFnG6XJl2gzGoL/SrI/h 19QDAKZZn2+S7Yow8MAdfef+ILu1Y9ms/4pumeUXHgVPJO7HDMCS85zQGU3tAB2n HgR4RRSXNsfXvW/rxx2YvGtJ3SZWnZM7NVbWcb25i8Wu/uBDOzoSW7uFRRad67cP d0MiHrB9RqltHGaJpEUisKLpTExd/GEZlTL+ILbXDROT+BHdLDQ= =ndvR -----END PGP SIGNATURE----- Merge tag 'docs-6.13' of git://git.lwn.net/linux Pull documentation updates from Jonathan Corbet: "Another moderately busy cycle in docsland: - Work on Chinese translations has picked up again. Happily, they are maintaining the existing translations and not just adding new ones. - Some maintenance of the Japanese and Italian translations as well. - The removal of the venerable "dontdiff" file. It has long outlived its usefulness and contained entries ("parse.*") that would actively mask actual source change. - The addition of enforcement information to the code-of-conduct documentation. Along with some build-system fixes and a lot of typo and language fixes" * tag 'docs-6.13' of git://git.lwn.net/linux: (52 commits) Documentation/CoC: spell out enforcement for unacceptable behaviors docs: fix typos and whitespace in Documentation/process/backporting.rst docs/zh_CN: fix one sentence in llvm.rst docs: bug-bisect: add a note about bisecting -next docs/zh_CN: add the translation of kbuild/llvm.rst Documentation: Fix incorrect paths/magic in magic numbers rst Documentation/maintainer-tip: Fix typos Documentation: Improve crash_kexec_post_notifiers description Docs/zh_CN: Translate physical_memory.rst to Simplified Chinese Documentation: admin: reorganize kernel-parameters intro docs/zh_CN: update the translation of process/programming-language.rst docs/zh_CN: update the translation of mm/page_owner.rst docs/zh_CN: update the translation of mm/page_table_check.rst docs/zh_CN: update the translation of mm/overcommit-accounting.rst docs/zh_CN: update the translation of mm/admon/faq.rst docs/zh_CN: update the translation of mm/active_mm.rst docs/zh_CN: update the translation of mm/hmm.rst docs: remove Documentation/dontdiff docs/zh_CN: Add a entry in Chinese glossary Docs/zh_CN: Fix the pfn calculation error in page_tables.rst ... |
||
Linus Torvalds
|
bf9aa14fc5 |
A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers posix-timers are currently auto-rearmed by the kernel when the signal of the timer is ignored so that the timer signal can be delivered once the corresponding signal is unignored. This requires to throttle the timer to prevent a DoS by small intervals and keeps the system pointlessly out of low power states for no value. This is a long standing non-trivial problem due to the lock order of posix-timer lock and the sighand lock along with life time issues as the timer and the sigqueue have different life time rules. Cure this by: * Embedding the sigqueue into the timer struct to have the same life time rules. Aside of that this also avoids the lookup of the timer in the signal delivery and rearm path as it's just a always valid container_of() now. * Queuing ignored timer signals onto a seperate ignored list. * Moving queued timer signals onto the ignored list when the signal is switched to SIG_IGN before it could be delivered. * Walking the ignored list when SIG_IGN is lifted and requeue the signals to the actual signal lists. This allows the signal delivery code to rearm the timer. This also required to consolidate the signal delivery rules so they are consistent across all situations. With that all self test scenarios finally succeed. - Core infrastructure for VFS multigrain timestamping This is required to allow the kernel to use coarse grained time stamps by default and switch to fine grained time stamps when inode attributes are actively observed via getattr(). These changes have been provided to the VFS tree as well, so that the VFS specific infrastructure could be built on top. - Cleanup and consolidation of the sleep() infrastructure * Move all sleep and timeout functions into one file * Rework udelay() and ndelay() into proper documented inline functions and replace the hardcoded magic numbers by proper defines. * Rework the fsleep() implementation to take the reality of the timer wheel granularity on different HZ values into account. Right now the boundaries are hard coded time ranges which fail to provide the requested accuracy on different HZ settings. * Update documentation for all sleep/timeout related functions and fix up stale documentation links all over the place * Fixup a few usage sites - Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks A system can have multiple PTP clocks which are participating in seperate and independent PTP clock domains. So far the kernel only considers the PTP clock which is based on CLOCK TAI relevant as that's the clock which drives the timekeeping adjustments via the various user space daemons through adjtimex(2). The non TAI based clock domains are accessible via the file descriptor based posix clocks, but their usability is very limited. They can't be accessed fast as they always go all the way out to the hardware and they cannot be utilized in the kernel itself. As Time Sensitive Networking (TSN) gains traction it is required to provide fast user and kernel space access to these clocks. The approach taken is to utilize the timekeeping and adjtimex(2) infrastructure to provide this access in a similar way how the kernel provides access to clock MONOTONIC, REALTIME etc. Instead of creating a duplicated infrastructure this rework converts timekeeping and adjtimex(2) into generic functionality which operates on pointers to data structures instead of using static variables. This allows to provide time accessors and adjtimex(2) functionality for the independent PTP clocks in a subsequent step. - Consolidate hrtimer initialization hrtimers are set up by initializing the data structure and then seperately setting the callback function for historical reasons. That's an extra unnecessary step and makes Rust support less straight forward than it should be. Provide a new set of hrtimer_setup*() functions and convert the core code and a few usage sites of the less frequently used interfaces over. The bulk of the htimer_init() to hrtimer_setup() conversion is already prepared and scheduled for the next merge window. - Drivers: * Ensure that the global timekeeping clocksource is utilizing the cluster 0 timer on MIPS multi-cluster systems. Otherwise CPUs on different clusters use their cluster specific clocksource which is not guaranteed to be synchronized with other clusters. * Mostly boring cleanups, fixes, improvements and code movement -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmc7kPITHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoZKkD/9OUL6fOJrDUmOYBa4QVeMyfTef4EaL tvwIMM/29XQFeiq3xxCIn+EMnHjXn2lvIhYGQ7GKsbKYwvJ7ZBDpQb+UMhZ2nKI9 6D6BP6WomZohKeH2fZbJQAdqOi3KRYdvQdIsVZUexkqiaVPphRvOH9wOr45gHtZM EyMRSotPlQTDqcrbUejDMEO94GyjDCYXRsyATLxjmTzL/N4xD4NRIiotjM2vL/a9 8MuCgIhrKUEyYlFoOxxeokBsF3kk3/ez2jlG9b/N8VLH3SYIc2zgL58FBgWxlmgG bY71nVG3nUgEjxBd2dcXAVVqvb+5widk8p6O7xxOAQKTLMcJ4H0tQDkMnzBtUzvB DGAJDHAmAr0g+ja9O35Pkhunkh4HYFIbq0Il4d1HMKObhJV0JumcKuQVxrXycdm3 UZfq3seqHsZJQbPgCAhlFU0/2WWScocbee9bNebGT33KVwSp5FoVv89C/6Vjb+vV Gusc3thqrQuMAZW5zV8g4UcBAA/xH4PB0I+vHib+9XPZ4UQ7/6xKl2jE0kd5hX7n AAUeZvFNFqIsY+B6vz+Jx/yzyM7u5cuXq87pof5EHVFzv56lyTp4ToGcOGYRgKH5 JXeYV1OxGziSDrd5vbf9CzdWMzqMvTefXrHbWrjkjhNOe8E1A8O88RZ5uRKZhmSw hZZ4hdM9+3T7cg== =2VC6 -----END PGP SIGNATURE----- Merge tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "A rather large update for timekeeping and timers: - The final step to get rid of auto-rearming posix-timers posix-timers are currently auto-rearmed by the kernel when the signal of the timer is ignored so that the timer signal can be delivered once the corresponding signal is unignored. This requires to throttle the timer to prevent a DoS by small intervals and keeps the system pointlessly out of low power states for no value. This is a long standing non-trivial problem due to the lock order of posix-timer lock and the sighand lock along with life time issues as the timer and the sigqueue have different life time rules. Cure this by: - Embedding the sigqueue into the timer struct to have the same life time rules. Aside of that this also avoids the lookup of the timer in the signal delivery and rearm path as it's just a always valid container_of() now. - Queuing ignored timer signals onto a seperate ignored list. - Moving queued timer signals onto the ignored list when the signal is switched to SIG_IGN before it could be delivered. - Walking the ignored list when SIG_IGN is lifted and requeue the signals to the actual signal lists. This allows the signal delivery code to rearm the timer. This also required to consolidate the signal delivery rules so they are consistent across all situations. With that all self test scenarios finally succeed. - Core infrastructure for VFS multigrain timestamping This is required to allow the kernel to use coarse grained time stamps by default and switch to fine grained time stamps when inode attributes are actively observed via getattr(). These changes have been provided to the VFS tree as well, so that the VFS specific infrastructure could be built on top. - Cleanup and consolidation of the sleep() infrastructure - Move all sleep and timeout functions into one file - Rework udelay() and ndelay() into proper documented inline functions and replace the hardcoded magic numbers by proper defines. - Rework the fsleep() implementation to take the reality of the timer wheel granularity on different HZ values into account. Right now the boundaries are hard coded time ranges which fail to provide the requested accuracy on different HZ settings. - Update documentation for all sleep/timeout related functions and fix up stale documentation links all over the place - Fixup a few usage sites - Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks A system can have multiple PTP clocks which are participating in seperate and independent PTP clock domains. So far the kernel only considers the PTP clock which is based on CLOCK TAI relevant as that's the clock which drives the timekeeping adjustments via the various user space daemons through adjtimex(2). The non TAI based clock domains are accessible via the file descriptor based posix clocks, but their usability is very limited. They can't be accessed fast as they always go all the way out to the hardware and they cannot be utilized in the kernel itself. As Time Sensitive Networking (TSN) gains traction it is required to provide fast user and kernel space access to these clocks. The approach taken is to utilize the timekeeping and adjtimex(2) infrastructure to provide this access in a similar way how the kernel provides access to clock MONOTONIC, REALTIME etc. Instead of creating a duplicated infrastructure this rework converts timekeeping and adjtimex(2) into generic functionality which operates on pointers to data structures instead of using static variables. This allows to provide time accessors and adjtimex(2) functionality for the independent PTP clocks in a subsequent step. - Consolidate hrtimer initialization hrtimers are set up by initializing the data structure and then seperately setting the callback function for historical reasons. That's an extra unnecessary step and makes Rust support less straight forward than it should be. Provide a new set of hrtimer_setup*() functions and convert the core code and a few usage sites of the less frequently used interfaces over. The bulk of the htimer_init() to hrtimer_setup() conversion is already prepared and scheduled for the next merge window. - Drivers: - Ensure that the global timekeeping clocksource is utilizing the cluster 0 timer on MIPS multi-cluster systems. Otherwise CPUs on different clusters use their cluster specific clocksource which is not guaranteed to be synchronized with other clusters. - Mostly boring cleanups, fixes, improvements and code movement" * tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits) posix-timers: Fix spurious warning on double enqueue versus do_exit() clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties clocksource/drivers/gpx: Remove redundant casts clocksource/drivers/timer-ti-dm: Fix child node refcount handling dt-bindings: timer: actions,owl-timer: convert to YAML clocksource/drivers/ralink: Add Ralink System Tick Counter driver clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource clocksource/drivers/timer-ti-dm: Don't fail probe if int not found clocksource/drivers:sp804: Make user selectable clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions hrtimers: Delete hrtimer_init_on_stack() alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack() io_uring: Switch to use hrtimer_setup_on_stack() sched/idle: Switch to use hrtimer_setup_on_stack() hrtimers: Delete hrtimer_init_sleeper_on_stack() wait: Switch to use hrtimer_setup_sleeper_on_stack() timers: Switch to use hrtimer_setup_sleeper_on_stack() net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack() futex: Switch to use hrtimer_setup_sleeper_on_stack() fs/aio: Switch to use hrtimer_setup_sleeper_on_stack() ... |
||
Linus Torvalds
|
0352387523 |
First step of consolidating the VDSO data page handling:
The VDSO data page handling is architecture specific for historical reasons, but there is no real technical reason to do so. Aside of that VDSO data has become a dump ground for various mechanisms and fail to provide a clear separation of the functionalities. Clean this up by: * consolidating the VDSO page data by getting rid of architecture specific warts especially in x86 and PowerPC. * removing the last includes of header files which are pulling in other headers outside of the VDSO namespace. * seperating timekeeping and other VDSO data accordingly. Further consolidation of the VDSO page handling is done in subsequent changes scheduled for the next merge window. This also lays the ground for expanding the VDSO time getters for independent PTP clocks in a generic way without making every architecture add support seperately. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmc7kyoTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoVBjD/9awdN2YeCGIM9rlHIktUdNRmRSL2SL 6av1CPffN5DenONYTXWrDYPkC4yfjUwIs8H57uzFo10yA7RQ/Qfq+O68k5GnuFew jvpmmYSZ6TT21AmAaCIhn+kdl9YbEJFvN2AWH85Bl29k9FGB04VzJlQMMjfEZ1a5 Mhwv+cfYNuPSZmU570jcxW2XgbyTWlLZBByXX/Tuz9bwpmtszba507bvo45x6gIP twaWNzrsyJpdXfMrfUnRiChN8jHlDN7I6fgQvpsoRH5FOiVwIFo0Ip2rKbk+ONfD W/rcU5oeqRIxRVDHzf2Sv8WPHMCLRv01ZHBcbJOtgvZC3YiKgKYoeEKabu9ZL1BH 6VmrxjYOBBFQHOYAKPqBuS7BgH5PmtMbDdSZXDfRaAKaCzhCRysdlWW7z48r2R// zPufb7J6Tle23AkuZWhFjvlGgSBl4zxnTFn31HYOyQps3TMI4y50Z2DhE/EeU8a6 DRl8/k1KQVDUZ6udJogS5kOr1J8pFtUPrA2uhR8UyLdx7YKiCzcdO1qWAjtXlVe8 oNpzinU+H9bQqGe9IyS7kCG9xNaCRZNkln5Q1WfnkTzg5f6ihfaCvIku3l4bgVpw 3HmcxYiC6RxQB+ozwN7hzCCKT4L9aMhr/457TNOqRkj2Elw3nvJ02L4aI86XAKLE jwO9Fkp9qcCxCw== =q5eD -----END PGP SIGNATURE----- Merge tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull vdso data page handling updates from Thomas Gleixner: "First steps of consolidating the VDSO data page handling. The VDSO data page handling is architecture specific for historical reasons, but there is no real technical reason to do so. Aside of that VDSO data has become a dump ground for various mechanisms and fail to provide a clear separation of the functionalities. Clean this up by: - consolidating the VDSO page data by getting rid of architecture specific warts especially in x86 and PowerPC. - removing the last includes of header files which are pulling in other headers outside of the VDSO namespace. - seperating timekeeping and other VDSO data accordingly. Further consolidation of the VDSO page handling is done in subsequent changes scheduled for the next merge window. This also lays the ground for expanding the VDSO time getters for independent PTP clocks in a generic way without making every architecture add support seperately" * tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits) x86/vdso: Add missing brackets in switch case vdso: Rename struct arch_vdso_data to arch_vdso_time_data powerpc: Split systemcfg struct definitions out from vdso powerpc: Split systemcfg data out of vdso data page powerpc: Add kconfig option for the systemcfg page powerpc/pseries/lparcfg: Use num_possible_cpus() for potential processors powerpc/pseries/lparcfg: Fix printing of system_active_processors powerpc/procfs: Propagate error of remap_pfn_range() powerpc/vdso: Remove offset comment from 32bit vdso_arch_data x86/vdso: Split virtual clock pages into dedicated mapping x86/vdso: Delete vvar.h x86/vdso: Access vdso data without vvar.h x86/vdso: Move the rng offset to vsyscall.h x86/vdso: Access rng vdso data without vvar.h x86/vdso: Access timens vdso data without vvar.h x86/vdso: Allocate vvar page from C code x86/vdso: Access rng data from kernel without vvar x86/vdso: Place vdso_data at beginning of vvar page x86/vdso: Use __arch_get_vdso_data() to access vdso data x86/mm/mmap: Remove arch_vma_name() ... |
||
Linus Torvalds
|
5c2b050848 |
A set of updates for the interrupt subsystem:
- Tree wide: * Make nr_irqs static to the core code and provide accessor functions to remove existing and prevent future aliasing problems with local variables or function arguments of the same name. - Core code: * Prevent freeing an interrupt in the devres code which is not managed by devres in the first place. * Use seq_put_decimal_ull_width() for decimal values output in /proc/interrupts which increases performance significantly as it avoids parsing the format strings over and over. * Optimize raising the timer and hrtimer soft interrupts by using the 'set bit only' variants instead of the combined version which checks whether ksoftirqd should be woken up. The latter is a pointless exercise as both soft interrupts are raised in the context of the timer interrupt and therefore never wake up ksoftirqd. * Delegate timer/hrtimer soft interrupt processing to a dedicated thread on RT. Timer and hrtimer soft interrupts are always processed in ksoftirqd on RT enabled kernels. This can lead to high latencies when other soft interrupts are delegated to ksoftirqd as well. The separate thread allows to run them seperately under a RT scheduling policy to reduce the latency overhead. - Drivers: * New drivers or extensions of existing drivers to support Renesas RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt chips * Support for multi-cluster GICs on MIPS. MIPS CPUs can come with multiple CPU clusters, where each CPU cluster has its own GIC (Generic Interrupt Controller). This requires to access the GIC of a remote cluster through a redirect register block. This is encapsulated into a set of helper functions to keep the complexity out of the actual code paths which handle the GIC details. * Support for encrypted guests in the ARM GICV3 ITS driver The ITS page needs to be shared with the hypervisor and therefore must be decrypted. * Small cleanups and fixes all over the place -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmc7ggcTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoaf7D/9G6FgJXx/60zqnpnOr9Yx0hxjaI47x PFyCd3P05qyVMBYXfI99vrSKuVdMZXJ/fH5L83y+sOaTASyLTzg37igZycIDJzLI FnHh/m/+UA8k2aIC5VUiNAjne2RLaTZiRN15uEHFVjByC5Y+YTlCNUE4BBhg5RfQ hKmskeffWdtui3ou13CSNvbFn+pmqi4g6n1ysUuLhiwM2E5b1rZMprcCOnun/cGP IdUQsODNWTTv9eqPJez985M6A1x2SCGNv7Z73h58B9N0pBRPEC1xnhUnCJ1sA0cJ pnfde2C1lztEjYbwDngy0wgq0P6LINjQ5Ma2YY2F2hTMsXGJxGPDZm24/u5uR46x N/gsOQMXqw6f5yvbiS7Asx9WzR6ry8rJl70QRgTyozz7xxJTaiNm2HqVFe2wc+et Q/BzaKdhmUJj1GMZmqD2rrgwYeDcb4wWYNtwjM4PVHHxYlJVq0mEF1kLLS8YDyjf HuGPVqtSkt3E0+Br3FKcv5ltUQP8clXbudc6L1u98YBfNK12hW8L+c3YSvIiFoYM ZOAeANPM7VtQbP2Jg2q81Dd3CShImt5jqL2um+l8g7+mUE7l9gyuO/w/a5dQ57+b kx7mHHIW2zCeHrkZZbRUYzI2BJfMCCOVN4Ax5OZxTLnLsL9VEehy8NM8QYT4TS8R XmTOYW3U9XR3gw== =JqxC -----END PGP SIGNATURE----- Merge tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt subsystem updates from Thomas Gleixner: "Tree wide: - Make nr_irqs static to the core code and provide accessor functions to remove existing and prevent future aliasing problems with local variables or function arguments of the same name. Core code: - Prevent freeing an interrupt in the devres code which is not managed by devres in the first place. - Use seq_put_decimal_ull_width() for decimal values output in /proc/interrupts which increases performance significantly as it avoids parsing the format strings over and over. - Optimize raising the timer and hrtimer soft interrupts by using the 'set bit only' variants instead of the combined version which checks whether ksoftirqd should be woken up. The latter is a pointless exercise as both soft interrupts are raised in the context of the timer interrupt and therefore never wake up ksoftirqd. - Delegate timer/hrtimer soft interrupt processing to a dedicated thread on RT. Timer and hrtimer soft interrupts are always processed in ksoftirqd on RT enabled kernels. This can lead to high latencies when other soft interrupts are delegated to ksoftirqd as well. The separate thread allows to run them seperately under a RT scheduling policy to reduce the latency overhead. Drivers: - New drivers or extensions of existing drivers to support Renesas RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt chips - Support for multi-cluster GICs on MIPS. MIPS CPUs can come with multiple CPU clusters, where each CPU cluster has its own GIC (Generic Interrupt Controller). This requires to access the GIC of a remote cluster through a redirect register block. This is encapsulated into a set of helper functions to keep the complexity out of the actual code paths which handle the GIC details. - Support for encrypted guests in the ARM GICV3 ITS driver The ITS page needs to be shared with the hypervisor and therefore must be decrypted. - Small cleanups and fixes all over the place" * tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits) irqchip/riscv-aplic: Prevent crash when MSI domain is missing genirq/proc: Use seq_put_decimal_ull_width() for decimal values softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT. timers: Use __raise_softirq_irqoff() to raise the softirq. hrtimer: Use __raise_softirq_irqoff() to raise the softirq riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers irqchip: Add T-HEAD C900 ACLINT SSWI driver dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK irqchip/mips-gic: Prevent indirect access to clusters without CPU cores irqchip/mips-gic: Multi-cluster support irqchip/mips-gic: Setup defaults in each cluster irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic() irqchip/mips-gic: Replace open coded online CPU iterations genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show() genirq/devres: Don't free interrupt which is not managed by devres irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool() irqchip/aspeed-intc: Add AST27XX INTC support dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC ... |
||
Linus Torvalds
|
fb1dd1403c |
A set of changes for debugobjects:
- Prevent destroying the kmem_cache on early failure. Destroying a kmem_cache requires work queues to be set up, but in the early failure case they are not yet initializated. So rather leak the cache instead of triggering a BUG. - Reduce parallel pool fill attempts. Refilling the object pool requires to take the global pool lock, which causes a massive performance issue when a large number of CPUs attempt to refill concurrently. It turns out that it's sufficient to let one CPU handle the refill from the to free list and in case there are not enough objects on it to allocate new objects from the kmem cache. This also splits the free list handling from the actual allocation path as that yields better results on RT where allocation is restricted to preemptible code paths. The refill from free list has no such restrictions. - Consolidate the global and the per CPU pools to use the same data structure, so all helper functions can be shared. - Simplify the object allocation/free logic. The allocation/free logic is an incomprehensible maze, which tries to utilize the to free list and the global pool in the best way. This all can be simplified into a straight forward comprehensible code flow. - Convert the allocation/free mechanism to batch mode. Transferring objects from the global pool to the per CPU pools or vice versa is done by walking the hlist and moving object by object. That not only increases the pool lock held time, it also dirties up to 17 cache lines. This can be avoided by storing the pointer to the first object in a batch of 16 objects in the objects themself and propagate it through the batch when an object is enqueued into a pool or to a temporary hlist head on allocation. This allows to move batches of objects with at max four cache lines dirtied and reduces the pool lock held time and therefore contention significantly. - Improve the object reusage The current implementation is too agressively freeing unused objects, which is counterproductive on bursty workloads like a kernel compile. Address this by: * increasing the per CPU pool size * refilling the per CPU pool from the to be freed pool when the per CPU pool emptied a batch * keeping track of object usage with a exponentially wheighted moving average which prevents the work queue callback to free objects prematuraly. This combined reduces the allocation/free rate for a full kernel compile significantly: kmem_cache_alloc() kmem_cache_free() Baseline: 380k 330k Improved: 170k 117k - A few cleanups and a more cache line friendly layout of debug information on top. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmc7ezETHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoYqOD/42X0//BzqdCs0W3jAuaSxbcncp14en kxuKJVcIOwTwiry5xnSD647YYBdXGZyEa1FR84eFpI6cM6O68mCm+Q4Ab+O02MwC 1tAAQ7fS3fhPBHip6RQtBygexH8WXH3I9BeeXkzQgMCyyObkjRSL3oLIGA4Azfuo q79LNZ5ctp9zd2DMWD/h+DEzYKr7LZfCMeoxXKLv6BdpZSS35cZhX4u7uu7DPryE AWPCFCE/bEv/QQZ9bUz9Zc8KXsclcgrPXn/ubP8NVK6IHJ2RjIXqBDzQo0C2+QVi yb/XdjmQJXNxb3RZxOpwwrefy/jhd8h41rY3prnfnHBU8XU7IFUgN6MfAC46peZR dXOLGxsLhJk2xaGcddqD7rSDA1hm7Dpn6ZtTbgiaxWd+ksUCxQckkzWCYlGXl3Az 4M0LeexWEBKQYBAb1XjAOmfWmndVZWJ6QDFNMN67o0YZt4Uh2APSV/0fevUBGjzT nVWxDzN0a/0kMuvmFtwnReVnnGKixC4X3AV4/mvNYQOoRhSrTxjwkBn2TxvZ+3Sh v5uNGkUGe3dXS4XBWbytm/HeDdzKZ/C3KATm+bHSqQ+/ktxuCp13EhiursYf5Yc/ 44T8sPEcSTj+xWHLZpsJfz0lpQM4q3KJj0HPQkSIHUD5KWTMkBSFonuBF6jHkf9H R4OsmrvXTdFG5g== =zxbA -----END PGP SIGNATURE----- Merge tag 'core-debugobjects-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull debugobjects updates from Thomas Gleixner: - Prevent destroying the kmem_cache on early failure. Destroying a kmem_cache requires work queues to be set up, but in the early failure case they are not yet initializated. So rather leak the cache instead of triggering a BUG. - Reduce parallel pool fill attempts. Refilling the object pool requires to take the global pool lock, which causes a massive performance issue when a large number of CPUs attempt to refill concurrently. It turns out that it's sufficient to let one CPU handle the refill from the to free list and in case there are not enough objects on it to allocate new objects from the kmem cache. This also splits the free list handling from the actual allocation path as that yields better results on RT where allocation is restricted to preemptible code paths. The refill from free list has no such restrictions. - Consolidate the global and the per CPU pools to use the same data structure, so all helper functions can be shared. - Simplify the object allocation/free logic. The allocation/free logic is an incomprehensible maze, which tries to utilize the to free list and the global pool in the best way. This all can be simplified into a straight forward comprehensible code flow. - Convert the allocation/free mechanism to batch mode. Transferring objects from the global pool to the per CPU pools or vice versa is done by walking the hlist and moving object by object. That not only increases the pool lock held time, it also dirties up to 17 cache lines. This can be avoided by storing the pointer to the first object in a batch of 16 objects in the objects themself and propagate it through the batch when an object is enqueued into a pool or to a temporary hlist head on allocation. This allows to move batches of objects with at max four cache lines dirtied and reduces the pool lock held time and therefore contention significantly. - Improve the object reusage The current implementation is too agressively freeing unused objects, which is counterproductive on bursty workloads like a kernel compile. Address this by: * increasing the per CPU pool size * refilling the per CPU pool from the to be freed pool when the per CPU pool emptied a batch * keeping track of object usage with a exponentially wheighted moving average which prevents the work queue callback to free objects prematuraly. This combined reduces the allocation/free rate for a full kernel compile significantly: kmem_cache_alloc() kmem_cache_free() Baseline: 380k 330k Improved: 170k 117k - A few cleanups and a more cache line friendly layout of debug information on top. * tag 'core-debugobjects-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) debugobjects: Track object usage to avoid premature freeing of objects debugobjects: Refill per CPU pool more agressively debugobjects: Double the per CPU slots debugobjects: Move pool statistics into global_pool struct debugobjects: Implement batch processing debugobjects: Prepare kmem_cache allocations for batching debugobjects: Prepare for batching debugobjects: Use static key for boot pool selection debugobjects: Rework free_object_work() debugobjects: Rework object freeing debugobjects: Rework object allocation debugobjects: Move min/max count into pool struct debugobjects: Rename and tidy up per CPU pools debugobjects: Use separate list head for boot pool debugobjects: Move pools into a datastructure debugobjects: Reduce parallel pool fill attempts debugobjects: Make debug_objects_enabled bool debugobjects: Provide and use free_object_list() debugobjects: Remove pointless debug printk debugobjects: Reuse put_objects() on OOM ... |
||
Linus Torvalds
|
a5c93bfec0 |
x86/mm changes for v6.13:
- x86/mm/tlb: Put cpumask_test_cpu() check in switch_mm_irqs_off() under CONFIG_DEBUG_VM, to micro-optimize the context-switching code (Rik van Riel) - x86/mm/doc: Add missing details in virtual memory layout (Kirill A. Shutemov) Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmc7gpURHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1iNSg//asJkGGkRhGpXikUC/8wrCZymu+P8POtH BUl6Ksj3I7r7qdd/jiWcbiWE9nCjVPeKAuO5EnR/lOjMzVnZKA7U8MUCgwRdDVLC u8QCDDZGTnlkRYmBYr6gO14Z+XS/ZT/uGVmDrGsEdnqdYy5kGta7yvKYL7MzCcgP 4yZLNokFFofwEyDjMullBDN9ytK2PzjWgdWLHsyXXxdAT68c9kH/xDDrjk145g5V 5p/xSz2v3CUeS+0dbrZ5MHS6r9YwTdYTqXE7Oftte0FLrSFxRNhoi7mA2p0Uoa+I KVFq2bK4Q5lx/vE3HSagOVmgU8BU1jJhd/bBei2SXVbEMhfPIPFtC4y1aSrWq39o N2tQZwK3xpUZTmtkp1Uu+5XVJZZieSbLfOe6xfP13puiEHVWIJI+NhMZAEP18k1N dza7AoldN61/1Tbjoz2fjMPIyEciVaUSycgL4DO3tFmrmnooUwYj0924mVU2+ksi qRePZAWZNJq6KUnZ5XOmZ4pSQVEikmFhlSvXr+k5iFYCHqsQ8OkKB4+AKynb9E6Q zPnQJsIAHRnRmBavyB4sOcFhT5AmRyDAV0xxbLYYzMCsebmcTFAdeR9i/8cy53kT W/jrcgteiQDG2DVjkWG7do6Ht3DqXoQbyB3DeaoQKjL7Zga75yuxGFUzEcdldF/0 Wx11Lev2cDI= =J3AD -----END PGP SIGNATURE----- Merge tag 'x86-mm-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm updates from Ingo Molnar: - Put cpumask_test_cpu() check in switch_mm_irqs_off() under CONFIG_DEBUG_VM, to micro-optimize the context-switching code (Rik van Riel) - Add missing details in virtual memory layout (Kirill A. Shutemov) * tag 'x86-mm-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/tlb: Put cpumask_test_cpu() check in switch_mm_irqs_off() under CONFIG_DEBUG_VM x86/mm/doc: Add missing details in virtual memory layout |
||
Linus Torvalds
|
89c45f3823 |
x86 cleanups for v6.13:
- x86/boot: Remove unused function atou() (Dr. David Alan Gilbert) - x86/cpu: Use str_yes_no() helper in show_cpuinfo_misc() (Thorsten Blum) - x86/platform: Switch back to struct platform_driver::remove() (Uwe Kleine-König) Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmc7gbsRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1gk4g//QiV5NS8d5mc+6q/UbVahST5Mf3Yktg7/ LIgzJyqUMZctkbcASDbyTlFqZXGYfZ/ZY6VPEOuo0ANE57GfSbcuwe+gdvL9kXWQ 9IN5Tst4BJ4iMC+FXYA+VgRAg5Ufy4xJFpw1ObnNtAQ4f2emCTeCMPonCrN8x737 2dbHzgnJSBbDgG6lxcEJZ/PsoKoTLiq6uZZ98FRRrHCWmkPkNOn2IQx97ITdAKcj LnQkTYnTRIzap/eLBrqgxhhtM2R+3DrDClar3WWRSCoFMYg6c8aptidDBQcJhUKZ XIhb2enKBKFVtzahjPVOiqLE2i+JGGiPSyQnCpt7y2yHQUyDXkDWWMPdZKC/6WHf +2sLgEdl+pz2o3mGDMCkkG58bDgEf0+5gGva+M5F6h7GslYM9Gp0doOYZDt6l+FH 3rrmXj2WKwI2kM0SWDwfgdLhhmPEsIm8DMOjOftEfR0pwqyUw5JmPfD1dnudrPX0 wfpRavlUAzzW0IbWaL+S2VhqQnLhLwJ/T/Gb6Gi6LOkTaRuD42hu0tkctlfJ/VTR 7Bk+mV2PHpBek3gWnKEUegYQ9LK9DGIucvYi693MWjXVFN6vSyNEsaefRHbT2rGi QuLnO2Laecg6SGNBjLYJBWjv72H2CohDRuJdFgzzJAEzebLwdCJE79qjqWRhpKAx sEzSy0+6waw= =l+KH -----END PGP SIGNATURE----- Merge tag 'x86-cleanups-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: - x86/boot: Remove unused function atou() (Dr. David Alan Gilbert) - x86/cpu: Use str_yes_no() helper in show_cpuinfo_misc() (Thorsten Blum) - x86/platform: Switch back to struct platform_driver::remove() (Uwe Kleine-König) * tag 'x86-cleanups-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Remove unused function atou() x86/cpu: Use str_yes_no() helper in show_cpuinfo_misc() x86/platform: Switch back to struct platform_driver::remove() |
||
Linus Torvalds
|
0892d74213 |
x86/splitlock changes for v6.13:
- Move Split and Bus lock code to a dedicated file (Ravi Bangoria) - Add split/bus lock support for AMD (Ravi Bangoria) Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmc7gMERHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1hEaQ//YRk2Dc3VkiwC+ZE44Bi4ZlztACzjvkL/ sFjOqX4dSWJLMFDPfISGGEN4e20IFA46uYXwoZQOZEz5RY4tPaJYw+o1aBP5YYEN EEv4iRc20FIIYckkyCShP00dKoZlmb6FbxyUysRRwZW0XJuMVLyJnGNmZs0peVvt 5c8+7erl0CPN9RaR66lULT4YenyvUZ7DChfeB3a1LbazC5+IrEumiIysLJUKj6zN 075+FeQ084156sFR+LUSjblxLKzY/OqT/727osST2WlMo/HWLIJImCXodHMHG+LC dRI0NFFU9zn2G6rGcoltLNsU/TSJfaWoGS8pm6c96kItEZly/BFz5MF1IQIbCfDx YFJpil1zJQQeV3FUXldhKGoSio0fv0KWcqC0TLjj/DhqprjdktJGuGIX6ChmkytA TDLZPWZxInZdVnWVMBuaJ6defMRBLART02u9DRIoXYEX6aDLjJ1JFTRe5hU9vVab cq+GR3ZSeDM9gSGjfW6dGG5746KXX+Wwxv4stxSoygSxmrLPH38CrZ5m66edtKzq P+V2/utvhdHZSKawsIpM4Xz5u7fweySkVFQjJyEEeMWyXnfC+alP9OUsVTKS8mFa zKbX7mEgnBDcEE9w6O5itL4nIgB3Kooci5uEWDRTAYUee82Hqk09Ycyb5XQkJ7bs Cl65CoY+XAA= =QpKp -----END PGP SIGNATURE----- Merge tag 'x86-splitlock-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 splitlock updates from Ingo Molnar: - Move Split and Bus lock code to a dedicated file (Ravi Bangoria) - Add split/bus lock support for AMD (Ravi Bangoria) * tag 'x86-splitlock-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/bus_lock: Add support for AMD x86/split_lock: Move Split and Bus lock code to a dedicated file |
||
Linus Torvalds
|
3f020399e4 |
Scheduler changes for v6.13:
- Core facilities: - Add the "Lazy preemption" model (CONFIG_PREEMPT_LAZY=y), which optimizes fair-class preemption by delaying preemption requests to the tick boundary, while working as full preemption for RR/FIFO/DEADLINE classes. (Peter Zijlstra) - x86: Enable Lazy preemption (Peter Zijlstra) - riscv: Enable Lazy preemption (Jisheng Zhang) - Initialize idle tasks only once (Thomas Gleixner) - sched/ext: Remove sched_fork() hack (Thomas Gleixner) - Fair scheduler: - Optimize the PLACE_LAG when se->vlag is zero (Huang Shijie) - Idle loop: Optimize the generic idle loop by removing unnecessary memory barrier (Zhongqiu Han) - RSEQ: - Improve cache locality of RSEQ concurrency IDs for intermittent workloads (Mathieu Desnoyers) - Waitqueues: - Make wake_up_{bit,var} less fragile (Neil Brown) - PSI: - Pass enqueue/dequeue flags to psi callbacks directly (Johannes Weiner) - Preparatory patches for proxy execution: - core: Add move_queued_task_locked helper (Connor O'Brien) - core: Consolidate pick_*_task to task_is_pushable helper (Connor O'Brien) - core: Split out __schedule() deactivate task logic into a helper (John Stultz) - core: Split scheduler and execution contexts (Peter Zijlstra) - locking/mutex: Make mutex::wait_lock irq safe (Juri Lelli) - locking/mutex: Expose __mutex_owner() (Juri Lelli) - locking/mutex: Remove wakeups from under mutex::wait_lock (Peter Zijlstra) - Misc fixes and cleanups: - core: Remove unused __HAVE_THREAD_FUNCTIONS hook support (David Disseldorp) - core: Update the comment for TIF_NEED_RESCHED_LAZY (Sebastian Andrzej Siewior) - wait: Remove unused bit_wait_io_timeout (Dr. David Alan Gilbert) - fair: remove the DOUBLE_TICK feature (Huang Shijie) - fair: fix the comment for PREEMPT_SHORT (Huang Shijie) - uclamp: Fix unnused variable warning (Christian Loehle) - rt: No PREEMPT_RT=y for all{yes,mod}config Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmc7fnQRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1hZTBAAozVdWA2m51aNa67HvAZta/olmrIagVbW inwbTgqa8b+UfeWEuKOfrZr5khjEh6pLgR3dBTib1uH6xxYj/Okds+qbPWSBPVLh yzavlm/zJZM1U1XtxE3eyVfqWik4GrY7DoIMDQQr+YH7rNXonJeJkll38OI2E5MC q3Q01qyMo8RJJX8qkf3f8ObOoP/51NsVniTw0Zb2fzEhXz8FjezLlxk6cMfgSkJG lg9gfIwUZ7Xg5neRo4kJcc3Ht31KYOhWSiupBJzRD1hss/N/AybvMcTX/Cm8d07w HIAdDDAn84o46miFo/a0V/hsJZ72idWbqxVJUCtaezrpOUiFkG+uInRvG/ynr0lF 5dEI9f+6PUw8Nc7L72IyHkobjPqS2IefSaxYYCBKmxMX2qrenfTor/pKiWzzhBIl rX3MZSuUJ8NjV4rNGD/qXRM1IsMJrsDwxDyv+sRec3XdH33x286ds6aAUEPDQ6N7 96VS0sOKcNUJN8776ErNjlIxRl8HTlpkaO3nZlQIfXgTlXUpRvOuKbEWqP+606lo oANgJTKgUhgJPWZnvmdRxDjSiOp93QcImjus9i1tN81FGiEDleONsJUxu2Di1E5+ s1nCiytjq+cdvzCqFyiOZUh+g6kSZ4yXxNgLg2UvbXzX1zOeUQT3WtyKUhMPXhU8 esh1TgbUbpE= =Zcqj -----END PGP SIGNATURE----- Merge tag 'sched-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "Core facilities: - Add the "Lazy preemption" model (CONFIG_PREEMPT_LAZY=y), which optimizes fair-class preemption by delaying preemption requests to the tick boundary, while working as full preemption for RR/FIFO/DEADLINE classes. (Peter Zijlstra) - x86: Enable Lazy preemption (Peter Zijlstra) - riscv: Enable Lazy preemption (Jisheng Zhang) - Initialize idle tasks only once (Thomas Gleixner) - sched/ext: Remove sched_fork() hack (Thomas Gleixner) Fair scheduler: - Optimize the PLACE_LAG when se->vlag is zero (Huang Shijie) Idle loop: - Optimize the generic idle loop by removing unnecessary memory barrier (Zhongqiu Han) RSEQ: - Improve cache locality of RSEQ concurrency IDs for intermittent workloads (Mathieu Desnoyers) Waitqueues: - Make wake_up_{bit,var} less fragile (Neil Brown) PSI: - Pass enqueue/dequeue flags to psi callbacks directly (Johannes Weiner) Preparatory patches for proxy execution: - Add move_queued_task_locked helper (Connor O'Brien) - Consolidate pick_*_task to task_is_pushable helper (Connor O'Brien) - Split out __schedule() deactivate task logic into a helper (John Stultz) - Split scheduler and execution contexts (Peter Zijlstra) - Make mutex::wait_lock irq safe (Juri Lelli) - Expose __mutex_owner() (Juri Lelli) - Remove wakeups from under mutex::wait_lock (Peter Zijlstra) Misc fixes and cleanups: - Remove unused __HAVE_THREAD_FUNCTIONS hook support (David Disseldorp) - Update the comment for TIF_NEED_RESCHED_LAZY (Sebastian Andrzej Siewior) - Remove unused bit_wait_io_timeout (Dr. David Alan Gilbert) - remove the DOUBLE_TICK feature (Huang Shijie) - fix the comment for PREEMPT_SHORT (Huang Shijie) - Fix unnused variable warning (Christian Loehle) - No PREEMPT_RT=y for all{yes,mod}config" * tag 'sched-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) sched, x86: Update the comment for TIF_NEED_RESCHED_LAZY. sched: No PREEMPT_RT=y for all{yes,mod}config riscv: add PREEMPT_LAZY support sched, x86: Enable Lazy preemption sched: Enable PREEMPT_DYNAMIC for PREEMPT_RT sched: Add Lazy preemption model sched: Add TIF_NEED_RESCHED_LAZY infrastructure sched/ext: Remove sched_fork() hack sched: Initialize idle tasks only once sched: psi: pass enqueue/dequeue flags to psi callbacks directly sched/uclamp: Fix unnused variable warning sched: Split scheduler and execution contexts sched: Split out __schedule() deactivate task logic into a helper sched: Consolidate pick_*_task to task_is_pushable helper sched: Add move_queued_task_locked helper locking/mutex: Expose __mutex_owner() locking/mutex: Make mutex::wait_lock irq safe locking/mutex: Remove wakeups from under mutex::wait_lock sched: Improve cache locality of RSEQ concurrency IDs for intermittent workloads sched: idle: Optimize the generic idle loop by removing needless memory barrier ... |
||
Colin Ian King
|
9080d11a6c |
scripts: ipe: polgen: remove redundant close and error exit path
Currently if an fopen fails the error exit path is via code that checks if fp is not null and closes the file, however, fp is null so this check and close is redundant. Since the only use of the err exit label is on the fopen check, remove it and replace the code with a simple return of errno. Also remove variable rc since it's no longer required. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Fan Wu <wufan@kernel.org> |
||
Linus Torvalds
|
f41dac3efb |
Performance events changes for v6.13:
- Uprobes: - Add BPF session support (Jiri Olsa) - Switch to RCU Tasks Trace flavor for better performance (Andrii Nakryiko) - Massively increase uretprobe SMP scalability by SRCU-protecting the uretprobe lifetime (Andrii Nakryiko) - Kill xol_area->slot_count (Oleg Nesterov) - Core facilities: - Implement targeted high-frequency profiling by adding the ability for an event to "pause" or "resume" AUX area tracing (Adrian Hunter) - VM profiling/sampling: - Correct perf sampling with guest VMs (Colton Lewis) - New hardware support: - x86/intel: Add PMU support for Intel ArrowLake-H CPUs (Dapeng Mi) - Misc fixes and enhancements: - x86/intel/pt: Fix buffer full but size is 0 case (Adrian Hunter) - x86/amd: Warn only on new bits set (Breno Leitao) - x86/amd/uncore: Avoid a false positive warning about snprintf truncation in amd_uncore_umc_ctx_init (Jean Delvare) - uprobes: Re-order struct uprobe_task to save some space (Christophe JAILLET) - x86/rapl: Move the pmu allocation out of CPU hotplug (Kan Liang) - x86/rapl: Clean up cpumask and hotplug (Kan Liang) - uprobes: Deuglify xol_get_insn_slot/xol_free_insn_slot paths (Oleg Nesterov) Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmc7eKERHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1i57A/+KQ6TrIoICVTE+BPlDfUw8NU+N3DagVb0 dzoyDxlDRsnsYzeXZipPn+3IitX1w+DrGxBNIojSoiFVCLnHIKgo4uHbj7cVrR7J fBTVSnoJ94SGAk5ySebvLwMLce/YhXBeHK2lx6W/pI6acNcxzDfIabjjETeqltUo g7hmT9lo10pzZEZyuUfYX9khlWBxda1dKHc9pMIq7baeLe4iz/fCGlJ0K4d4M4z3 NPZw239Np6iHUwu3Lcs4gNKe4rcDe7Bt47hpedemHe0Y+7c4s2HaPxbXWxvDtE76 mlsg93i28f8SYxeV83pREn0EOCptXcljhiek+US+GR7NSbltMnV+uUiDfPKIE9+Y vYP/DYF9hx73FsOucEFrHxYYcePorn3pne5/khBYWdQU6TnlrBYWpoLQsjgCKTTR 4JhCFlBZ5cDpc6ihtpwCwVTQ4Q/H7vM1XOlDwx0hPhcIPPHDreaQD/wxo61jBdXf PY0EPAxh3BcQxfPYuDS+XiYjQ8qO8MtXMKz5bZyHBZlbHwccV6T4ExjsLKxFk5As 6BG8pkBWLg7drXAgVdleIY0ux+34w/Zzv7gemdlQxvWLlZrVvpjiG93oU3PTpZeq A2UD9eAOuXVD6+HsF/dmn88sFmcLWbrMskFWujkvhEUmCvSGAnz3YSS/mLEawBiT 2xI8xykNWSY= =ItOT -----END PGP SIGNATURE----- Merge tag 'perf-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull performance events updates from Ingo Molnar: "Uprobes: - Add BPF session support (Jiri Olsa) - Switch to RCU Tasks Trace flavor for better performance (Andrii Nakryiko) - Massively increase uretprobe SMP scalability by SRCU-protecting the uretprobe lifetime (Andrii Nakryiko) - Kill xol_area->slot_count (Oleg Nesterov) Core facilities: - Implement targeted high-frequency profiling by adding the ability for an event to "pause" or "resume" AUX area tracing (Adrian Hunter) VM profiling/sampling: - Correct perf sampling with guest VMs (Colton Lewis) New hardware support: - x86/intel: Add PMU support for Intel ArrowLake-H CPUs (Dapeng Mi) Misc fixes and enhancements: - x86/intel/pt: Fix buffer full but size is 0 case (Adrian Hunter) - x86/amd: Warn only on new bits set (Breno Leitao) - x86/amd/uncore: Avoid a false positive warning about snprintf truncation in amd_uncore_umc_ctx_init (Jean Delvare) - uprobes: Re-order struct uprobe_task to save some space (Christophe JAILLET) - x86/rapl: Move the pmu allocation out of CPU hotplug (Kan Liang) - x86/rapl: Clean up cpumask and hotplug (Kan Liang) - uprobes: Deuglify xol_get_insn_slot/xol_free_insn_slot paths (Oleg Nesterov)" * tag 'perf-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) perf/core: Correct perf sampling with guest VMs perf/x86: Refactor misc flag assignments perf/powerpc: Use perf_arch_instruction_pointer() perf/core: Hoist perf_instruction_pointer() and perf_misc_flags() perf/arm: Drop unused functions uprobes: Re-order struct uprobe_task to save some space perf/x86/amd/uncore: Avoid a false positive warning about snprintf truncation in amd_uncore_umc_ctx_init perf/x86/intel: Do not enable large PEBS for events with aux actions or aux sampling perf/x86/intel/pt: Add support for pause / resume perf/core: Add aux_pause, aux_resume, aux_start_paused perf/x86/intel/pt: Fix buffer full but size is 0 case uprobes: SRCU-protect uretprobe lifetime (with timeout) uprobes: allow put_uprobe() from non-sleepable softirq context perf/x86/rapl: Clean up cpumask and hotplug perf/x86/rapl: Move the pmu allocation out of CPU hotplug uprobe: Add support for session consumer uprobe: Add data pointer to consumer handlers perf/x86/amd: Warn only on new bits set uprobes: fold xol_take_insn_slot() into xol_get_insn_slot() uprobes: kill xol_area->slot_count ... |
||
Linus Torvalds
|
9d7d4ad222 |
Objtool changes for v6.13:
- Detect non-relocated text references for more robust IBT sealing (Josh Poimboeuf) - Fix build error when building stripped down UAPI headers (HONG Yifan) - Exclude __tracepoints data from ENDBR checks to fix false positives on clang builds (Peter Zijlstra) - Fix ORC unwind for newly forked tasks (Zheng Yejian) - Fix readelf related faddr2line regression (Carlos Llamas) Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmc7FYARHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1g5nQ//W6Hs6dUlQpHyq5af/QU7OHdxo8EQTvWR 6i2Y+D/+N+Va69N3IaaCmiYkvO9AETl8IrVjur6XAHhHm5ylFAJ9AhRCs/DUcDqs OCzN263x2fH38GHf4WOc6mSUKJhR2/FN6/qfuf3bFKQytOciAZLn7GYRrtQdFd5v 8rRbETMaqkRexEfFukEJr3gPggy7NGcyBhOz2RZHiEO3aUQxkhVcHkP2Sr2pUDkb 8e+X30wYMzMbi9ZhBuu4prb4L3GPfDRIuPvBQfldQvMuayKJlZ10NMnlzDfFrFDd R34DXhELlheWGxBGGj9Rq2GbQLpjneZDOX7i8XtuaHljiYfUaQyAMdsLkvMiKnmb 44iHIOEExm0MKcnMO3dWSYXPCT2bBiqnvFnh3J2eWBaXF9i9an7/b54xBnNpC3Al KYJWmOiDzr6NZ8UyDclqaNc0Zv31fBPYAji0T5gSFe2qsN6XpyjNOmyl0vH61eEI WQfYBjopbVsMW/7Dh95qXwK55D94QUhSba4yZepzwd9meOlgnO3QNNx2MwciGG7i G1TKPdsT8ndbkaDuk6iTsrGi5UpGhDyQ45agXM7w/K3EXMQLEP6eBno/U213jvQV kPBp0X0EbD7LezDsvC0Q4khfNSDELVq8F493ctQCOzqmQa4ypAwVz0HevZQsXSxO 7bCNMxA7Klk= =eio4 -----END PGP SIGNATURE----- Merge tag 'objtool-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool updates from Ingo Molnar: - Detect non-relocated text references for more robust IBT sealing (Josh Poimboeuf) - Fix build error when building stripped down UAPI headers (HONG Yifan) - Exclude __tracepoints data from ENDBR checks to fix false positives on clang builds (Peter Zijlstra) - Fix ORC unwind for newly forked tasks (Zheng Yejian) - Fix readelf related faddr2line regression (Carlos Llamas) * tag 'objtool-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Exclude __tracepoints data from ENDBR checks Revert "scripts/faddr2line: Check only two symbols when calculating symbol size" x86/unwind/orc: Fix unwind for newly forked tasks objtool: Also include tools/include/uapi objtool: Detect non-relocated text references |
||
Linus Torvalds
|
364eeb79a2 |
Locking changes for v6.13 are:
- lockdep: - Enable PROVE_RAW_LOCK_NESTING with PROVE_LOCKING (Sebastian Andrzej Siewior) - Add lockdep_cleanup_dead_cpu() (David Woodhouse) - futexes: - Use atomic64_inc_return() in get_inode_sequence_number() (Uros Bizjak) - Use atomic64_try_cmpxchg_relaxed() in get_inode_sequence_number() (Uros Bizjak) - RT locking: - Add sparse annotation PREEMPT_RT's locking (Sebastian Andrzej Siewior) - spinlocks: - Use atomic_try_cmpxchg_release() in osq_unlock() (Uros Bizjak) - atomics: - x86: Use ALT_OUTPUT_SP() for __alternative_atomic64() (Uros Bizjak) - x86: Use ALT_OUTPUT_SP() for __arch_{,try_}cmpxchg64_emu() (Uros Bizjak) - KCSAN, seqlocks: - Support seqcount_latch_t (Marco Elver) - <linux/cleanup.h>: - Add if_not_cond_guard() conditional guard helper (David Lechner) - Adjust scoped_guard() macros to avoid potential warning (Przemek Kitszel) - Remove address space of returned pointer (Uros Bizjak) - WW mutexes: - locking/ww_mutex: Adjust to lockdep nest_lock requirements (Thomas Hellström) - Rust integration: - Fix raw_spin_lock initialization on PREEMPT_RT (Eder Zulian) - miscellaneous cleanups & fixes: - lockdep: Fix wait-type check related warnings (Ahmed Ehab) - lockdep: Use info level for initial info messages (Jiri Slaby) - spinlocks: Make __raw_* lock ops static (Geert Uytterhoeven) - pvqspinlock: Convert fields of 'enum vcpu_state' to uppercase (Qiuxu Zhuo) - iio: magnetometer: Fix if () scoped_guard() formatting (Stephen Rothwell) - rtmutex: Fix misleading comment (Peter Zijlstra) - percpu-rw-semaphores: Fix grammar in percpu-rw-semaphore.rst (Xiu Jianfeng) Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmc7AkQRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1hGqQ/+KWR5arkoJjH/Nf5IyezYitOwqK7YAdJk mrWoZcez0DRopNTf8yZMv1m8jyx7W9KUQumEO/ghqJRlBW+AbxZ1t99kmqWI5Aw0 +zmhpyo06JHeMYQAfKJXX3iRt2Rt59BPHtGzoop6b0e2i55+uPE+DZTNm2+FwCV9 4vxmfpYyg5/sJB9/v5b0N9TTDe9a8caOHXU5F+HA1yWuxMmqFuDFIcpKrgS/sUeP NelOLbh2L3UOPWP6tRRfpajxCQTmRoeZOQQv0L9dd3jYpyQOCesgKqOhqNTCU8KK qamTPig2N00smSLp6I/OVyJ96vFYZrbhyq0kwMayaafAU7mB8lzcfUj+8qP0c90k 1PROtD1XpF3Nobp1F+YUp3sQxEGdCgs+9VeLWWObv2b/Vt3MDZijdEiC/3OkRAUh LPCfl/ky41BmT8AlaxRDjkyrN7hH4oUOkGUdVx6yR389J0OR9MSwEX9qNaMw8bBg 1ALvv9+OR3QhTWyG30PGqUf3Um230oIdWuWxwFrhaoMmDVEVMRZQMtvQahi5hDYq zyX79DKWtExEe/f2hY1m/6eNm6st5HE7X7scOba3TamQzvOzJkjzo7XoS2yeUAjb eByO2G0PvTrA0TFls6Hyrl6db5OW5KjQnVWr6W3fiWL5YIdh0SQMkWeaGVvGyfy8 Q3vhk7POaZo= =BvPn -----END PGP SIGNATURE----- Merge tag 'locking-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "Lockdep: - Enable PROVE_RAW_LOCK_NESTING with PROVE_LOCKING (Sebastian Andrzej Siewior) - Add lockdep_cleanup_dead_cpu() (David Woodhouse) futexes: - Use atomic64_inc_return() in get_inode_sequence_number() (Uros Bizjak) - Use atomic64_try_cmpxchg_relaxed() in get_inode_sequence_number() (Uros Bizjak) RT locking: - Add sparse annotation PREEMPT_RT's locking (Sebastian Andrzej Siewior) spinlocks: - Use atomic_try_cmpxchg_release() in osq_unlock() (Uros Bizjak) atomics: - x86: Use ALT_OUTPUT_SP() for __alternative_atomic64() (Uros Bizjak) - x86: Use ALT_OUTPUT_SP() for __arch_{,try_}cmpxchg64_emu() (Uros Bizjak) KCSAN, seqlocks: - Support seqcount_latch_t (Marco Elver) <linux/cleanup.h>: - Add if_not_guard() conditional guard helper (David Lechner) - Adjust scoped_guard() macros to avoid potential warning (Przemek Kitszel) - Remove address space of returned pointer (Uros Bizjak) WW mutexes: - locking/ww_mutex: Adjust to lockdep nest_lock requirements (Thomas Hellström) Rust integration: - Fix raw_spin_lock initialization on PREEMPT_RT (Eder Zulian) Misc cleanups & fixes: - lockdep: Fix wait-type check related warnings (Ahmed Ehab) - lockdep: Use info level for initial info messages (Jiri Slaby) - spinlocks: Make __raw_* lock ops static (Geert Uytterhoeven) - pvqspinlock: Convert fields of 'enum vcpu_state' to uppercase (Qiuxu Zhuo) - iio: magnetometer: Fix if () scoped_guard() formatting (Stephen Rothwell) - rtmutex: Fix misleading comment (Peter Zijlstra) - percpu-rw-semaphores: Fix grammar in percpu-rw-semaphore.rst (Xiu Jianfeng)" * tag 'locking-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits) locking/Documentation: Fix grammar in percpu-rw-semaphore.rst iio: magnetometer: fix if () scoped_guard() formatting rust: helpers: Avoid raw_spin_lock initialization for PREEMPT_RT kcsan, seqlock: Fix incorrect assumption in read_seqbegin() seqlock, treewide: Switch to non-raw seqcount_latch interface kcsan, seqlock: Support seqcount_latch_t time/sched_clock: Broaden sched_clock()'s instrumentation coverage time/sched_clock: Swap update_clock_read_data() latch writes locking/atomic/x86: Use ALT_OUTPUT_SP() for __arch_{,try_}cmpxchg64_emu() locking/atomic/x86: Use ALT_OUTPUT_SP() for __alternative_atomic64() cleanup: Add conditional guard helper cleanup: Adjust scoped_guard() macros to avoid potential warning locking/osq_lock: Use atomic_try_cmpxchg_release() in osq_unlock() cleanup: Remove address space of returned pointer locking/rtmutex: Fix misleading comment locking/rt: Annotate unlock followed by lock for sparse. locking/rt: Add sparse annotation for RCU. locking/rt: Remove one __cond_lock() in RT's spin_trylock_irqsave() locking/rt: Add sparse annotation PREEMPT_RT's sleeping locks. locking/pvqspinlock: Convert fields of 'enum vcpu_state' to uppercase ... |
||
Linus Torvalds
|
d8d78a90e7 |
- Add a feature flag which denotes AMD CPUs supporting workload classification
with the purpose of using such hints when making scheduling decisions - Determine the boost enumerator for each AMD core based on its type: efficiency or performance, in the cppc driver - Add the type of a CPU to the topology CPU descriptor with the goal of supporting and making decisions based on the type of the respective core - Add a feature flag to denote AMD cores which have heterogeneous topology and enable SD_ASYM_PACKING for those - Check microcode revisions before disabling PCID on Intel - Cleanups and fixlets -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmc7q0UACgkQEsHwGGHe VUq27Q//TADIn/rZj95OuWLYFXduOpzdyfF6BAOabRjUpIWTGJ5YdKjj1TCA2wUE 6SiHZWQxQropB3NgeICcDT+3OGdGzE2qywzpXspUDsBPraWx+9CA56qREYafpRps 88ZQZJWHla2/0kHN5oM4fYe05mWMLAFgIhG4tPH/7sj54Zqar40nhVksz3WjKAid yEfzbdVeRI5sNoujyHzGANXI0Fo98nAyi5Qj9kXL9W/UV1JmoQ78Rq7V9IIgOBsc l6Gv/h0CNtH9voqfrfUb07VHk8ZqSJ37xUnrnKdidncWGCWEAoZRr7wU+I9CHKIs tzdx+zq6JC3YN0IwsZCjk4me+BqVLJxW2oDgW7esPifye6ElyEo4T9UO9LEpE1qm ReAByoIMdSXWwXuITwy4NxLPKPCpU7RyJCiqFzpJp0g4qUq2cmlyERDirf6eknXL s+dmRaglEdcQT/EL+Y+vfFdQtLdwJmOu+nPPjjFxeRcIDB+u1sXJMEFbyvkLL6FE HOdNxL+5n/3M8Lbh77KIS5uCcjXL2VCkZK2/hyoifUb+JZR/ENoqYjElkMXOplyV KQIfcTzVCLRVvZApf/MMkTO86cpxMDs7YLYkgFxDsBjRdoq/Mzub8yzWn6kLZtmP ANNH4uYVtjrHE1nxJSA0JgYQlJKYeNU5yhLiTLKhHL5BwDYfiz8= =420r -----END PGP SIGNATURE----- Merge tag 'x86_cpu_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpuid updates from Borislav Petkov: - Add a feature flag which denotes AMD CPUs supporting workload classification with the purpose of using such hints when making scheduling decisions - Determine the boost enumerator for each AMD core based on its type: efficiency or performance, in the cppc driver - Add the type of a CPU to the topology CPU descriptor with the goal of supporting and making decisions based on the type of the respective core - Add a feature flag to denote AMD cores which have heterogeneous topology and enable SD_ASYM_PACKING for those - Check microcode revisions before disabling PCID on Intel - Cleanups and fixlets * tag 'x86_cpu_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Remove redundant CONFIG_NUMA guard around numa_add_cpu() x86/cpu: Fix FAM5_QUARK_X1000 to use X86_MATCH_VFM() x86/cpu: Fix formatting of cpuid_bits[] in scattered.c x86/cpufeatures: Add X86_FEATURE_AMD_WORKLOAD_CLASS feature bit x86/amd: Use heterogeneous core topology for identifying boost numerator x86/cpu: Add CPU type to struct cpuinfo_topology x86/cpu: Enable SD_ASYM_PACKING for PKG domain on AMD x86/cpufeatures: Add X86_FEATURE_AMD_HETEROGENEOUS_CORES x86/cpufeatures: Rename X86_FEATURE_FAST_CPPC to have AMD prefix x86/mm: Don't disable PCID when INVLPG has been fixed by microcode |
||
Linus Torvalds
|
55db8eb456 |
- Do the proper memory conversion of guest memory in order to be able to kexec
kernels in SNP guests along with other adjustments and cleanups to that effect - Start converting and moving functionality from the sev-guest driver into core code with the purpose of supporting the secure TSC SNP feature where the hypervisor cannot influence the TSC exposed to the guest anymore - Add a "nosnp" cmdline option in order to be able to disable SNP support in the hypervisor and thus free-up resources which are not going to be used - Cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmc7ZToACgkQEsHwGGHe VUp61hAArA8taJaGUSdoe3sN60yRWCTe30QiDLvUrDGqmPHbBnDpdYsoaZujkQMI 334piSWWu/pB6meO93uwv8X/ZO0ryOw46RK3szTz/RhBB5pTO3NbAj1zMF5q2KUy a+SYbZffV+qBUEpGujGrqrwT7X3U70yCKJFaZQOGvyYFzo+kyx6euqlYP+StOD+D ph7SDrXv0N0uU/2OiwCzF0cKvAuNHG2Cfn3kqSKvcZ+NWF3BKmw1IkgFA9f05P+j mOkc+1jCbi26b94MSJHSL33iRtbD0NgUzT9F2tw9Qszw1BQ5Er30Y45ywoudAhsn VrpMhBwWRCUdakQ2PsI7O8WB4gnBdWpEuzS2Ssqa1akB+pggH2xQzVb5EznmbzlS gz/SqUP75ijTT/oGh+C/hKAES3pmO4pH48J7llOKzb8YpoxxzjSEVb2pVbLzNdIV +it12Cap0lW+CTNGF4p2TbuKXKkE1LiGya1JMymQiZL8quCBYJIQUttiBvBg8Ac1 oCw2DXQZsjDw55Hwwhr95J4FuY4+iQd+o1GgRDQ4MEqaYFEfdcFRA1YCbMHgiAzu NOGwjrQ2PB5xGST34qobGtk7Xt2nIilDvl5K5Co2E4s14NLrlBHo2uq33d0unlIZ BJMrHG/IWNjuHbKl/vM05fuiKEIvpL5qTKz7oVL6tX8Zphf6ljU= =C431 -----END PGP SIGNATURE----- Merge tag 'x86_sev_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SEV updates from Borislav Petkov: - Do the proper memory conversion of guest memory in order to be able to kexec kernels in SNP guests along with other adjustments and cleanups to that effect - Start converting and moving functionality from the sev-guest driver into core code with the purpose of supporting the secure TSC SNP feature where the hypervisor cannot influence the TSC exposed to the guest anymore - Add a "nosnp" cmdline option in order to be able to disable SNP support in the hypervisor and thus free-up resources which are not going to be used - Cleanups [ Reminding myself about the endless TLA's again: SEV is the AMD Secure Encrypted Virtualization - Linus ] * tag 'x86_sev_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev: Cleanup vc_handle_msr() x86/sev: Convert shared memory back to private on kexec x86/mm: Refactor __set_clr_pte_enc() x86/boot: Skip video memory access in the decompressor for SEV-ES/SNP virt: sev-guest: Carve out SNP message context structure virt: sev-guest: Reduce the scope of SNP command mutex virt: sev-guest: Consolidate SNP guest messaging parameters to a struct x86/sev: Cache the secrets page address x86/sev: Handle failures from snp_init() virt: sev-guest: Use AES GCM crypto library x86/virt: Provide "nosnp" boot option for sev kernel command line x86/virt: Move SEV-specific parsing into arch/x86/virt/svm |
||
Linus Torvalds
|
9db8b24070 |
- Replace deprecated PCI functions used in intel-mid
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmc7W2sACgkQEsHwGGHe VUoMPxAAqwuB04TbhSdXA+ScEv5Y8J2MTtrFHkGTjvutiQsaWpRFdlLL79+TbfAt hnOsX9FoeFuuJBBovB48A2PPLdfocnz8y5vH8JXHDzH/aMi64wbWmNlrR86rlYX9 L5Wz7NB40aKncF5EY5kTu0pQiFllrDsdbys89IMNJNZFjCi/M2/ffU9nIHlAITmW 3aHdiIW0VPZ5Ip05/f2tNdCLjuRpbC9FhZK4bFZ8+9q0FMZY5OBEScZvzbbgLWTI vdftZILzF9vzzBvy3mL0FSklED/EPzpN5DiKuJQaw0WLQokMy4JXj9395roeULWs 82zzg4q1wTfNJVEAxmTcR2I62Z8KK3DNlfAFeIrgFyoTuAAUCIikhf3krHEboc/B wTC8naSef7ZZWmaUDPk/Mfdo45OuuFQXrFkEucYr1S8GS/htfERMs4cwBq5EDrtu YgHCdlNYe8gUScsjs2hogIiE55JxDyQvMZIHGpqwwBovWF17G5jJGyiOhpWuB1Lq kjNo3EEW4wCr+Rb8CSVH8pa4783sxV94LAoUaY03L8HD2PevwFn9L1FffVulX+zF DmAjubqXPRInr/6HvO7P/IAQqwESBtLYz7ZF4yp+VRkDz47Iew7r2DN0TPhd2GdV +vjfJ8hONrTywvmLwpQ5jp6r+ls4FF9ua6qcBzGpQoKXnvf41b8= =ok9C -----END PGP SIGNATURE----- Merge tag 'x86_platform_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform cleanup from Borislav Petkov: - Replace deprecated PCI functions used in intel-mid * tag 'x86_platform_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform/intel-mid: Replace deprecated PCI functions |
||
Linus Torvalds
|
ab713e7099 |
- Remove the unconditional cache writeback and invalidation after loading the
microcode patch on Intel as this was addressing a microcode bug for which there is a concrete microcode revision check instead -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmc7Vv4ACgkQEsHwGGHe VUpZtA//erQJlwD+GLWfVoao76Y24LPUVAd20CjvtExDqvOsmvA7lYID89tFXxx0 dD3NDQBW8MI0oZ+Upc9fdRLMWE7SEOQDqk4WlMDMckc1+lv54+lqVA5wv6ee7goY ksUoMQ30MAMZ8ka4vGyjLFsLiYFhVgNCivuJdyi2igABHCGQFSRyl8zog6gWtUTU 3YzTjYjNBY1nZAL99Ibda6VpnmWLOyP24X8hqMp8DD/qqHwhKZfnnqTdoIAkalOq OBK/7vQVaWj5YyUwH/VoJ2iorTv0/XtrNsBRkrxmQaS996/WR8yN4mHbuvThiATc i7b9IEVuoc6KhEuy4sPqt4Yl3QomEed+85/p1NJ5jD6cF4x2+GSnpJF6v/bNRR7T j46jStvJ7f15OcugExRGFI9DjC64ZbHumSrumhLWmKmAqjfAqlYChWUOicHi8l3+ fshTnTRBSUmglGqbkgEVPIRv9e4BkuMpnFCDqAiq8mUm0dzqOZyvvh/gfHTUA+h0 2HykwBitgHEC/e4EHiPpT/Bnm93uL/qBNOhgOWCmOfLGJgdcAE93qP48urj1cbES D5wbNqM5iUvA8jw4frWl222nf7r0FuHVD05pkhJ3m2uvJINWCC3EHFD2Bs3vTEr9 xSGN+nOuWFR2D65RvsMr0eO9x1OTYo679TSyfeTHChnNMWRBcXQ= =wDsa -----END PGP SIGNATURE----- Merge tag 'x86_microcode_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 microcode loader update from Borislav Petkov: - Remove the unconditional cache writeback and invalidation after loading the microcode patch on Intel as this was addressing a microcode bug for which there is a concrete microcode revision check instead * tag 'x86_microcode_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode/intel: Remove unnecessary cache writeback and invalidation |
||
Linus Torvalds
|
5a4b3fbb48 |
- Add support for 6-node sub-NUMA clustering on Intel
- Cleanup -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmc7UqEACgkQEsHwGGHe VUoheQ//RYJFLA8K4JLykSSlzY6ixf4wr6aorO7cn0xPLi73ZKRWHMLpL7jWO1z4 SgKgWM0w93DjbNK81EcQLmTBQPSSzHnMzACafVJBkfQQiAjdsHxaOcJ6Y7tbFkXB BVf8wFmiNamz00OxtXMUv3ZwvKn9xrar1R67yYOdrZVCV1w4A3IzfNPPpmc3FE5r n+Z8tZybBzQqyyMnlyirKjHx1/bGURN/fF8+UuRy9T8L7XcI5Y8QUCP9N0K1OiUg 8XBDoy4Wc0F47XdnKqLxY/eR2D+qqH+KgIyjVThGJ5tJHRRpN5maK2s4s5eeT3Js /o8GAInChsXnyr9CAs4rUk4/f4Ai5QlccFGv+LPHBfUxcRfw+tXDe6sBQdIhUFpR q87CGnkbfp2yLrADxIjne59l5RqI8S1gGXGTtBJSVzu993Xu/w1Vpfkb52rLBVGZ JqQsGzHtbZyEA3mSnbWY1kHOSkwqccQejGjD5ufygdhojO1H0stvOsOxY0doFeII DQWlKDY78J1yN0r3RXdwzmD6W5SJ1r+03jbSRUb/3CaQpdKUiAk+8vV6mw4EfHEo gnCqU21jGZTqhCRquqehpzD8SK56gndbA6TEC6avx+8eTizA4uNKQWe07lKMM4oe glHCZvAf1k+hGvGz/8xioCQSpHgfZvVlZoR4Kv1enOj+05uiohc= =7r2j -----END PGP SIGNATURE----- Merge tag 'x86_cache_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cache resource control updates from Borislav Petkov: - Add support for 6-node sub-NUMA clustering on Intel - Cleanup * tag 'x86_cache_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/resctrl: Support Sub-NUMA cluster mode SNC6 x86/resctrl: Slightly clean-up mbm_config_show() |
||
Linus Torvalds
|
c1f2ffe207 |
- Log and handle twp new AMD-specific MCA registers: SYND1 and SYND2 and
report the Field Replaceable Unit text info reported through them - Add support for handling variable-sized SMCA BERT records - Add the capability for reporting vendor-specific RAS error info without adding vendor-specific fields to struct mce - Cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmc7OlEACgkQEsHwGGHe VUpXihAAgVdZExo/1Rmbh6s/259BH38GP6fL+ePaT1SlUzNi770TY2b7I4OYlms4 xa9t8LAIVMrrIMIg6w6q8JN4YHAQoVdcbRBvHQYB1a24xtoyxaEJxLKQNLA1soUQ Jc9asWMHBuXnLfR/4S8Y2vWrzByOSwxqDBzQCu0Ryqvbg7vdRicNt+Hk9oHHIAYy cquZpoDGL3W6BA8sXONbEW/6rcQ33JsEQ+Ub4qr1q2g+kNwXrrFuXZlojmz2MxIs xgqeYKyrxK6heX0l8dSiipCATA+sOXXWWzbZtdPjFtDGzwIlV3p4yXN3fucrmHm1 4Fg1gW5a1V82Qosn0FbGiZPojsahhOE2k1bz+yEMDM3Sg2qeRWcK+V3jiS5zKzPd WWqUbRtcaxayoEsAXnWrxrp3vxhlUUf1Ivtgk8mlMjhHPLijV5iranrRj+XHEikR H0D3Vm0T1LHCPf9AUsbmo0GAfAOeO9DTAB9LJdKv+OJ4ESVgSPJW/9NKWLXKq41p hhs7seJTYNw8sp67cL23TnkSp3S+9kd2U7Od3T1kubtd4fVxVnlowu8Fc6kjqd8v n+GbdLxhX7GbOgnT0z2OG5Xmc1pNW1JtRbuxSK59NFNia7r6ZkR7BE/OCtL82Rfm u7i76z1O0lV91y93GMCyP9DYn8K1ceU7gVCveY6mx/AHgzc87d8= =djpG -----END PGP SIGNATURE----- Merge tag 'ras_core_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Borislav Petkov: - Log and handle twp new AMD-specific MCA registers: SYND1 and SYND2 and report the Field Replaceable Unit text info reported through them - Add support for handling variable-sized SMCA BERT records - Add the capability for reporting vendor-specific RAS error info without adding vendor-specific fields to struct mce - Cleanups * tag 'ras_core_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: EDAC/mce_amd: Add support for FRU text in MCA x86/mce/apei: Handle variable SMCA BERT record size x86/MCE/AMD: Add support for new MCA_SYND{1,2} registers tracing: Add __print_dynamic_array() helper x86/mce: Add wrapper for struct mce to export vendor specific info x86/mce/intel: Use MCG_BANKCNT_MASK instead of 0xff x86/mce/mcelog: Use xchg() to get and clear the flags |