Commit Graph

82 Commits

Author SHA1 Message Date
Steve Capper
14c127c957 arm64: mm: Flip kernel VA space
In order to allow for a KASAN shadow that changes size at boot time, one
must fix the KASAN_SHADOW_END for both 48 & 52-bit VAs and "grow" the
start address. Also, it is highly desirable to maintain the same
function addresses in the kernel .text between VA sizes. Both of these
requirements necessitate us to flip the kernel address space halves s.t.
the direct linear map occupies the lower addresses.

This patch puts the direct linear map in the lower addresses of the
kernel VA range and everything else in the higher ranges.

We need to adjust:
 *) KASAN shadow region placement logic,
 *) KASAN_SHADOW_OFFSET computation logic,
 *) virt_to_phys, phys_to_virt checks,
 *) page table dumper.

These are all small changes, that need to take place atomically, so they
are bundled into this commit.

As part of the re-arrangement, a guard region of 2MB (to preserve
alignment for fixed map) is added after the vmemmap. Otherwise the
vmemmap could intersect with IS_ERR pointers.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-08-09 11:16:51 +01:00
Vincenzo Frascino
a22c5cf5d3 arm64: vdso: Fix Makefile regression
Using an old .config in combination with "make oldconfig" can cause
an incorrect detection of the compat compiler:

$ grep CROSS_COMPILE_COMPAT .config
CONFIG_CROSS_COMPILE_COMPAT_VDSO=""

$ make oldconfig && make
arch/arm64/Makefile:58: gcc not found, check CROSS_COMPILE_COMPAT.
Stop.

Accordingly to the section 7.2 of the GNU Make manual "Syntax of
Conditionals", "When the value results from complex expansions of
variables and functions, expansions you would consider empty may
actually contain whitespace characters and thus are not seen as
empty. However, you can use the strip function to avoid interpreting
whitespace as a non-empty value."

Fix the issue adding strip to the CROSS_COMPILE_COMPAT string
evaluation.

Reported-by: Matteo Croce <mcroce@redhat.com>
Tested-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-07-31 18:08:47 +01:00
Linus Torvalds
106f1466e7 Kconfig updates for v5.3
- always require argument for --defconfig and remove the hard-coded
   arch/$(ARCH)/defconfig path
 
 - make arch/$(SRCARCH)/configs/defconfig the new default of defconfig
 
 - some code cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJSBAABCgA8FiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl0oxR0eHHlhbWFkYS5t
 YXNhaGlyb0Bzb2Npb25leHQuY29tAAoJED2LAQed4NsG6mcP/20IEEaWCnpQf45c
 0f724ZiVJzl3auhAyZZzjHSj6n4J0cP+91BSilS9tfkCcrhemxK6JitTbLdNq6qi
 pRAVX3cGxeAn0qpqRqGwcDGL9I+iEi559fSG4k0/tWP1ILDvNFKy6dEvPqzPXdRX
 uRCt99Mw52GInKAnXMtoK6CbOQjDjzw/iuvn6+MgDRdVpTI4wzMMUPY5PdEC6ebH
 xnGzVzNT1PlSyW8FsHSUNkpYDWtRAfqapFWzv1zUS9s0PLkCgHNq/M1uZKFfxrl7
 GRZPGZvlDUTTnoED0uGWun+GAA78dr5GUWPC0Dm5oUMZs0dkcPnafaNl7jt+mHkf
 akbHHMxLqmSC7JAodBaCbwmqFr1vQamQgpwWD2EEA5ixOU26MIXFH38aEcNCl9zt
 Ym310BIYvVWaqDqOHy1AHBQSSheuo76WdJMYKuQyaa85QUKvys51nMQTRgFuF/13
 UNdOpUk4bCM5eUHg5gQHT8E50biJ1p97qmv9iYMKjQ8PssG43vushGpSwROwNxEX
 BvOf3wjocL5I666dRWW/y7vhbwRrKraNYmEVdJ9v7YbEmDNbjcQkuwHTdKS8JYz2
 xrwrwio8xUKjSaIKZ3zilAQ5CE47JgWPn48OwL1HeDadrXTbSmIARpZRIFL8f4NR
 1vjhSc1Ll1kmopSnKJRmpMvKjMlb
 =1fr/
 -----END PGP SIGNATURE-----

Merge tag 'kconfig-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kconfig updates from Masahiro Yamada:

 - always require argument for --defconfig and remove the hard-coded
   arch/$(ARCH)/defconfig path

 - make arch/$(SRCARCH)/configs/defconfig the new default of defconfig

 - some code cleanups

* tag 'kconfig-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: remove meaningless if-conditional in conf_read()
  kconfig: Fix spelling of sym_is_changable
  unicore32: rename unicore32_defconfig to defconfig
  kconfig: make arch/*/configs/defconfig the default of KBUILD_DEFCONFIG
  kconfig: add static qualifier to expand_string()
  kconfig: require the argument of --defconfig
  kconfig: remove always false ifeq ($(KBUILD_DEFCONFIG,) conditional
2019-07-12 16:06:27 -07:00
Vincenzo Frascino
bfe801ebe8 arm64: vdso: Enable vDSO compat support
Add vDSO compat support to the arm64 build system.

Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Shijith Thotton <sthotton@marvell.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Huw Davies <huw@codeweavers.com>
Link: https://lkml.kernel.org/r/20190621095252.32307-16-vincenzo.frascino@arm.com
2019-06-22 21:21:09 +02:00
Nathan Chancellor
fa63da2ab0 arm64: Don't unconditionally add -Wno-psabi to KBUILD_CFLAGS
This is a GCC only option, which warns about ABI changes within GCC, so
unconditionally adding it breaks Clang with tons of:

warning: unknown warning option '-Wno-psabi' [-Wunknown-warning-option]

and link time failures:

ld.lld: error: undefined symbol: __efistub___stack_chk_guard
>>> referenced by arm-stub.c:73
(/home/nathan/cbl/linux/drivers/firmware/efi/libstub/arm-stub.c:73)
>>>               arm-stub.stub.o:(__efistub_install_memreserve_table)
in archive ./drivers/firmware/efi/libstub/lib.a

These failures come from the lack of -fno-stack-protector, which is
added via cc-option in drivers/firmware/efi/libstub/Makefile. When an
unknown flag is added to KBUILD_CFLAGS, clang will noisily warn that it
is ignoring the option like above, unlike gcc, who will just error.

$ echo "int main() { return 0; }" > tmp.c

$ clang -Wno-psabi tmp.c; echo $?
warning: unknown warning option '-Wno-psabi' [-Wunknown-warning-option]
1 warning generated.
0

$ gcc -Wsometimes-uninitialized tmp.c; echo $?
gcc: error: unrecognized command line option
‘-Wsometimes-uninitialized’; did you mean ‘-Wmaybe-uninitialized’?
1

For cc-option to work properly with clang and behave like gcc, -Werror
is needed, which was done in commit c3f0d0bc5b ("kbuild, LLVMLinux:
Add -Werror to cc-option to support clang").

$ clang -Werror -Wno-psabi tmp.c; echo $?
error: unknown warning option '-Wno-psabi'
[-Werror,-Wunknown-warning-option]
1

As a consequence of this, when an unknown flag is unconditionally added
to KBUILD_CFLAGS, it will cause cc-option to always fail and those flags
will never get added:

$ clang -Werror -Wno-psabi -fno-stack-protector tmp.c; echo $?
error: unknown warning option '-Wno-psabi'
[-Werror,-Wunknown-warning-option]
1

This can be seen when compiling the whole kernel as some warnings that
are normally disabled (see below) show up. The full list of flags
missing from drivers/firmware/efi/libstub are the following (gathered
from diffing .arm64-stub.o.cmd):

-fno-delete-null-pointer-checks
-Wno-address-of-packed-member
-Wframe-larger-than=2048
-Wno-unused-const-variable
-fno-strict-overflow
-fno-merge-all-constants
-fno-stack-check
-Werror=date-time
-Werror=incompatible-pointer-types
-ffreestanding
-fno-stack-protector

Use cc-disable-warning so that it gets disabled for GCC and does nothing
for Clang.

Fixes: ebcc5928c5 ("arm64: Silence gcc warnings about arch ABI drift")
Link: https://github.com/ClangBuiltLinux/linux/issues/511
Reported-by: Qian Cai <cai@lca.pw>
Acked-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-06-12 10:54:47 +01:00
Masahiro Yamada
bd305f259c kconfig: make arch/*/configs/defconfig the default of KBUILD_DEFCONFIG
Until recently, if KBUILD_DEFCONFIG was not set by the arch Makefile,
the default path arch/*/defconfig was used.

The last users of the default are gone by the following commits:

- Commit f3e20ad67b ("s390: move arch/s390/defconfig to
  arch/s390/configs/defconfig")

- Commit 986a13769c ("alpha: move arch/alpha/defconfig to
  arch/alpha/configs/defconfig")

Let's set arch/*/configs/defconfig as a new default. This saves
KBUILD_DEFCONFIG for some architectures.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2019-06-09 15:08:18 +09:00
Dave Martin
ebcc5928c5 arm64: Silence gcc warnings about arch ABI drift
Since GCC 9, the compiler warns about evolution of the
platform-specific ABI, in particular relating for the marshaling of
certain structures involving bitfields.

The kernel is a standalone binary, and of course nobody would be
so stupid as to expose structs containing bitfields as function
arguments in ABI.  (Passing a pointer to such a struct, however
inadvisable, should be unaffected by this change.  perf and various
drivers rely on that.)

So these warnings do more harm than good: turn them off.

We may miss warnings about future ABI drift, but that's too bad.
Future ABI breaks of this class will have to be debugged and fixed
the traditional way unless the compiler evolves finer-grained
diagnostics.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-06-06 13:28:45 +01:00
Andrey Konovalov
b2f557eae9 kasan, arm64: adjust shadow size for tag-based mode
Tag-based KASAN uses 1 shadow byte for 16 bytes of kernel memory, so it
requires 1/16th of the kernel virtual address space for the shadow memory.

This commit sets KASAN_SHADOW_SCALE_SHIFT to 4 when the tag-based KASAN
mode is enabled.

Link: http://lkml.kernel.org/r/308b6bd49f756bb5e533be93c6f085ba99b30339.1544099024.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:43 -08:00
Ard Biesheuvel
0a1213fa74 arm64: enable per-task stack canaries
This enables the use of per-task stack canary values if GCC has
support for emitting the stack canary reference relative to the
value of sp_el0, which holds the task struct pointer in the arm64
kernel.

The $(eval) extends KBUILD_CFLAGS at the moment the make rule is
applied, which means asm-offsets.o (which we rely on for the offset
value) is built without the arguments, and everything built afterwards
has the options set.

Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-12 18:45:31 +00:00
Ard Biesheuvel
3bbd3db864 arm64: relocatable: fix inconsistencies in linker script and options
readelf complains about the section layout of vmlinux when building
with CONFIG_RELOCATABLE=y (for KASLR):

  readelf: Warning: [21]: Link field (0) should index a symtab section.
  readelf: Warning: [21]: Info field (0) should index a relocatable section.

Also, it seems that our use of '-pie -shared' is contradictory, and
thus ambiguous. In general, the way KASLR is wired up at the moment
is highly tailored to how ld.bfd happens to implement (and conflate)
PIE executables and shared libraries, so given the current effort to
support other toolchains, let's fix some of these issues as well.

- Drop the -pie linker argument and just leave -shared. In ld.bfd,
  the differences between them are unclear (except for the ELF type
  of the produced image [0]) but lld chokes on seeing both at the
  same time.

- Rename the .rela output section to .rela.dyn, as is customary for
  shared libraries and PIE executables, so that it is not misidentified
  by readelf as a static relocation section (producing the warnings
  above).

- Pass the -z notext and -z norelro options to explicitly instruct the
  linker to permit text relocations, and to omit the RELRO program
  header (which requires a certain section layout that we don't adhere
  to in the kernel). These are the defaults for current versions of
  ld.bfd.

- Discard .eh_frame and .gnu.hash sections to avoid them from being
  emitted between .head.text and .text, screwing up the section layout.

These changes only affect the ELF image, and produce the same binary
image.

[0] b9dce7f1ba ("arm64: kernel: force ET_DYN ELF type for ...")

Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Smith <peter.smith@linaro.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-04 12:48:25 +00:00
Linus Torvalds
83650fd58a arm64 2nd round of updates for 4.20:
- Fix W+X page (mark RO) allocated by the arm64 kprobes code
 
 - Makefile fix for .i files in out of tree modules
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAlvdeMUACgkQa9axLQDI
 XvGVAQ/8Dd6M1NwDsPqdemdWVOGJJi+c+Ou39c29dCvPkZV63ZgPBaQiOX5DJ18T
 TUjC+Q2zW4Oag86q4N0REOQiafDfScNU/ZsDgnfHvagKNc6+V1lqzb8DsteeeCW9
 YOPnbL/VV+dBKKXphjW23VQfsz5ryDU6HKoDHRgOOtHisnTOKJGj/HCXzn1LY6x4
 us/Gl6U/kJyRs0/7F8lmfSatDK2o+bKo0/0X6OV7dNE3bo++rpWxCX8D/dcBiEwV
 BZDkWu5noglnzYz/LwobYwIjshd6cNjSjJKgoudp3+6WtcFGiK347HDQyo6WqBSd
 5hmo/R0My5SUWrwb3GVmxFQmDDxIwywneSkKdx00PNygoNBhu7VYOrf7C/8NOl2h
 a0lMCl1Q9x+/2ZDWHhgcwZ6Nfkj/3hJ/3jQVtfqt7ldXgPmZQPrBcx0+CzjGAAiK
 gmIpr7VH701KkQGMljV4W0AurWx4v/+YpewkSODBOcbEQTd6trl8I5+A0SA+o6eC
 F479l8meU9H0vf9fMB1bkRxBipyaFRKNaTuabO3wHN45C4fzQCXQi5pjfvyAfC+f
 zZbnTKeWVzAafnYGcS6Fml+hUD3QQdARnd3WDOyzwBC7EvZM3gGmFWnlkMxbgSuV
 9c9+t7fMLChQiKUZ+bjNQpaXZ0YmA9+1fRqb9xCOP1/Ll7933A0=
 =hH50
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull more arm64 updates from Catalin Marinas:

 - fix W+X page (mark RO) allocated by the arm64 kprobes code

 - Makefile fix for .i files in out of tree modules

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kprobe: make page to RO mode when allocate it
  arm64: kdump: fix small typo
  arm64: makefile fix build of .i file in external module case
2018-11-03 10:55:23 -07:00
Victor Kamensky
98356eb0ae arm64: makefile fix build of .i file in external module case
After 'a66649dab350 arm64: fix vdso-offsets.h dependency' if
one will try to build .i file in case of external kernel module,
build fails complaining that prepare0 target is missing. This
issue came up with SystemTap when it tries to build variety
of .i files for its own generated kernel modules trying to
figure given kernel features/capabilities.

The issue is that prepare0 is defined in top level Makefile
only if KBUILD_EXTMOD is not defined. .i file rule depends
on prepare and in case KBUILD_EXTMOD defined top level Makefile
contains empty rule for prepare. But after mentioned commit
arch/arm64/Makefile would introduce dependency on prepare0
through its own prepare target.

Fix it to put proper ifdef KBUILD_EXTMOD around code introduced
by mentioned commit. It matches what top level Makefile does.

Acked-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-11-02 17:16:48 +00:00
Rob Herring
37c8a5fafa kbuild: consolidate Devicetree dtb build rules
There is nothing arch specific about building dtb files other than their
location under /arch/*/boot/dts/. Keeping each arch aligned is a pain.
The dependencies and supported targets are all slightly different.
Also, a cross-compiler for each arch is needed, but really the host
compiler preprocessor is perfectly fine for building dtbs. Move the
build rules to a common location and remove the arch specific ones. This
is done in a single step to avoid warnings about overriding rules.

The build dependencies had been a mixture of 'scripts' and/or 'prepare'.
These pull in several dependencies some of which need a target compiler
(specifically devicetable-offsets.h) and aren't needed to build dtbs.
All that is really needed is dtc, so adjust the dependencies to only be
dtc.

This change enables support 'dtbs_install' on some arches which were
missing the target.

Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Paul Burton <paul.burton@mips.com>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Cc: linux-mips@linux-mips.org
Cc: nios2-dev@lists.rocketboards.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-xtensa@linux-xtensa.org
Signed-off-by: Rob Herring <robh@kernel.org>
2018-10-02 09:23:21 -05:00
Masahiro Yamada
d503ac531a kbuild: rename LDFLAGS to KBUILD_LDFLAGS
Commit a0f97e06a4 ("kbuild: enable 'make CFLAGS=...' to add
additional options to CC") renamed CFLAGS to KBUILD_CFLAGS.

Commit 222d394d30 ("kbuild: enable 'make AFLAGS=...' to add
additional options to AS") renamed AFLAGS to KBUILD_AFLAGS.

Commit 06c5040cdb ("kbuild: enable 'make CPPFLAGS=...' to add
additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS.

For some reason, LDFLAGS was not renamed.

Using a well-known variable like LDFLAGS may result in accidental
override of the variable.

Kbuild generally uses KBUILD_ prefixed variables for the internally
appended options, so here is one more conversion to sanitize the
naming convention.

I did not touch Makefiles under tools/ since the tools build system
is a different world.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-24 08:22:08 +09:00
Linus Torvalds
1202f4fdbc arm64 updates for 4.19
A bunch of good stuff in here:
 
 - Wire up support for qspinlock, replacing our trusty ticket lock code
 
 - Add an IPI to flush_icache_range() to ensure that stale instructions
   fetched into the pipeline are discarded along with the I-cache lines
 
 - Support for the GCC "stackleak" plugin
 
 - Support for restartable sequences, plus an arm64 port for the selftest
 
 - Kexec/kdump support on systems booting with ACPI
 
 - Rewrite of our syscall entry code in C, which allows us to zero the
   GPRs on entry from userspace
 
 - Support for chained PMU counters, allowing 64-bit event counters to be
   constructed on current CPUs
 
 - Ensure scheduler topology information is kept up-to-date with CPU
   hotplug events
 
 - Re-enable support for huge vmalloc/IO mappings now that the core code
   has the correct hooks to use break-before-make sequences
 
 - Miscellaneous, non-critical fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJbbV41AAoJELescNyEwWM0WoEIALhrKtsIn6vqFlSs/w6aDuJL
 cMWmFxjTaKLmIq2+cJIdFLOJ3CH80Pu9gB+nEv/k+cZdCTfUVKfRf28HTpmYWsht
 bb4AhdHMC7yFW752BHk+mzJspeC8h/2Rm8wMuNVplZ3MkPrwo3vsiuJTofLhVL/y
 BihlU3+5sfBvCYIsWnuEZIev+/I/s/qm1ASiqIcKSrFRZP6VTt5f9TC75vFI8seW
 7yc3odKb0CArexB8yBjiPNziehctQF42doxQyL45hezLfWw4qdgHOSiwyiOMxEz9
 Fwwpp8Tx33SKLNJgqoqYznGW9PhYJ7n2Kslv19uchJrEV+mds82vdDNaWRULld4=
 =kQn6
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 "A bunch of good stuff in here. Worth noting is that we've pulled in
  the x86/mm branch from -tip so that we can make use of the core
  ioremap changes which allow us to put down huge mappings in the
  vmalloc area without screwing up the TLB. Much of the positive
  diffstat is because of the rseq selftest for arm64.

  Summary:

   - Wire up support for qspinlock, replacing our trusty ticket lock
     code

   - Add an IPI to flush_icache_range() to ensure that stale
     instructions fetched into the pipeline are discarded along with the
     I-cache lines

   - Support for the GCC "stackleak" plugin

   - Support for restartable sequences, plus an arm64 port for the
     selftest

   - Kexec/kdump support on systems booting with ACPI

   - Rewrite of our syscall entry code in C, which allows us to zero the
     GPRs on entry from userspace

   - Support for chained PMU counters, allowing 64-bit event counters to
     be constructed on current CPUs

   - Ensure scheduler topology information is kept up-to-date with CPU
     hotplug events

   - Re-enable support for huge vmalloc/IO mappings now that the core
     code has the correct hooks to use break-before-make sequences

   - Miscellaneous, non-critical fixes and cleanups"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits)
  arm64: alternative: Use true and false for boolean values
  arm64: kexec: Add comment to explain use of __flush_icache_range()
  arm64: sdei: Mark sdei stack helper functions as static
  arm64, kaslr: export offset in VMCOREINFO ELF notes
  arm64: perf: Add cap_user_time aarch64
  efi/libstub: Only disable stackleak plugin for arm64
  arm64: drop unused kernel_neon_begin_partial() macro
  arm64: kexec: machine_kexec should call __flush_icache_range
  arm64: svc: Ensure hardirq tracing is updated before return
  arm64: mm: Export __sync_icache_dcache() for xen-privcmd
  drivers/perf: arm-ccn: Use devm_ioremap_resource() to map memory
  arm64: Add support for STACKLEAK gcc plugin
  arm64: Add stack information to on_accessible_stack
  drivers/perf: hisi: update the sccl_id/ccl_id when MT is supported
  arm64: fix ACPI dependencies
  rseq/selftests: Add support for arm64
  arm64: acpi: fix alignment fault in accessing ACPI
  efi/arm: map UEFI memory map even w/o runtime services enabled
  efi/arm: preserve early mapping of UEFI memory map longer for BGRT
  drivers: acpi: add dependency of EFI for arm64
  ...
2018-08-14 16:39:13 -07:00
Olof Johansson
c931d34ea0 arm64: build with baremetal linker target instead of Linux when available
Not all toolchains have the baremetal elf targets, RedHat/Fedora ones
in particular. So, probe for whether it's available and use the previous
(linux) targets if it isn't.

Reported-by: Laura Abbott <labbott@redhat.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-07-23 15:30:19 +01:00
Laura Abbott
96f95a17c1 Revert "arm64: Use aarch64elf and aarch64elfb emulation mode variants"
This reverts commit 38fc424867.

Distributions such as Fedora and Debian do not package the ELF linker
scripts with their toolchains, resulting in kernel build failures such
as:

  |   CHK     include/generated/compile.h
  |   LD [M]  arch/arm64/crypto/sha512-ce.o
  | aarch64-linux-gnu-ld: cannot open linker script file ldscripts/aarch64elf.xr: No such file or directory
  | make[1]: *** [scripts/Makefile.build:530: arch/arm64/crypto/sha512-ce.o] Error 1
  | make: *** [Makefile:1029: arch/arm64/crypto] Error 2

Revert back to the linux targets for now, adding a comment to the Makefile
so we don't accidentally break this in the future.

Cc: Paul Kocialkowski <contact@paulk.fr>
Cc: <stable@vger.kernel.org>
Fixes: 38fc424867 ("arm64: Use aarch64elf and aarch64elfb emulation mode variants")
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-07-10 10:16:54 +01:00
Greg Hackmann
1a381d4a0a arm64: remove no-op -p linker flag
Linking the ARM64 defconfig kernel with LLVM lld fails with the error:

  ld.lld: error: unknown argument: -p
  Makefile:1015: recipe for target 'vmlinux' failed

Without this flag, the ARM64 defconfig kernel successfully links with
lld and boots on Dragonboard 410c.

After digging through binutils source and changelogs, it turns out that
-p is only relevant to ancient binutils installations targeting 32-bit
ARM.  binutils accepts -p for AArch64 too, but it's always been
undocumented and silently ignored.  A comment in
ld/emultempl/aarch64elf.em explains that it's "Only here for backwards
compatibility".

Since this flag is a no-op on ARM64, we can safely drop it.

Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-07-05 19:12:48 +01:00
Masahiro Yamada
2893af07e5 arm64: add endianness option to LDFLAGS instead of LD
With the recent syntax extension, Kconfig is now able to evaluate the
compiler / toolchain capability.

However, accumulating flags to 'LD' is not compatible with the way
it works; 'LD' must be passed to Kconfig to call $(ld-option,...)
from Kconfig files.  If you tweak 'LD' in arch Makefile depending on
CONFIG_CPU_BIG_ENDIAN, this would end up with circular dependency
between Makefile and Kconfig.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-07-04 22:49:13 +01:00
Paul Kocialkowski
38fc424867 arm64: Use aarch64elf and aarch64elfb emulation mode variants
The aarch64linux and aarch64linuxb emulation modes are not supported by
bare-metal toolchains and Linux using them forbids building the kernel
with these toolchains.

Since there is apparently no reason to target these emulation modes, the
more generic elf modes are used instead, allowing to build on bare-metal
toolchains as well as the already-supported ones.

Fixes: 3d6a7b99e3 ("arm64: ensure the kernel is compiled for LP64")

Cc: stable@vger.kernel.org
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-07-04 17:37:01 +01:00
Masahiro Yamada
f3a53f7b57 arm64: move GCC version check for ARCH_SUPPORTS_INT128 to Kconfig
This becomes much neater in Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
2018-06-08 18:56:02 +09:00
Luc Van Oostenryck
1f2f01b122 kbuild: add machine size to CHECKFLAGS
By default, sparse assumes a 64bit machine when compiled on x86-64
and 32bit when compiled on anything else.

This can of course create all sort of problems for the other archs, like
issuing false warnings ('shift too big (32) for type unsigned long'), or
worse, failing to emit legitimate warnings.

Fix this by adding the -m32/-m64 flag, depending on CONFIG_64BIT,
to CHECKFLAGS in the main Makefile (and so for all archs).
Also, remove the now unneeded -m32/-m64 in arch specific Makefiles.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-01 11:36:58 +09:00
Jason A. Donenfeld
ad40bdafb4 arm64: support __int128 with clang
Commit fb8722735f ("arm64: support __int128 on gcc 5+") added support
for arm64 __int128 with gcc with a version-conditional, but neglected to
enable this for clang, which in fact appears to support aarch64 __int128.
This commit therefore enables it if the compiler is clang, using the
same type of makefile conditional used elsewhere in the tree.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-04-24 19:07:55 +01:00
Ard Biesheuvel
a257e02579 arm64/kernel: don't ban ADRP to work around Cortex-A53 erratum #843419
Working around Cortex-A53 erratum #843419 involves special handling of
ADRP instructions that end up in the last two instruction slots of a
4k page, or whose output register gets overwritten without having been
read. (Note that the latter instruction sequence is never emitted by
a properly functioning compiler, which is why it is disregarded by the
handling of the same erratum in the bfd.ld linker which we rely on for
the core kernel)

Normally, this gets taken care of by the linker, which can spot such
sequences at final link time, and insert a veneer if the ADRP ends up
at a vulnerable offset. However, linux kernel modules are partially
linked ELF objects, and so there is no 'final link time' other than the
runtime loading of the module, at which time all the static relocations
are resolved.

For this reason, we have implemented the #843419 workaround for modules
by avoiding ADRP instructions altogether, by using the large C model,
and by passing -mpc-relative-literal-loads to recent versions of GCC
that may emit adrp/ldr pairs to perform literal loads. However, this
workaround forces us to keep literal data mixed with the instructions
in the executable .text segment, and literal data may inadvertently
turn into an exploitable speculative gadget depending on the relative
offsets of arbitrary symbols.

So let's reimplement this workaround in a way that allows us to switch
back to the small C model, and to drop the -mpc-relative-literal-loads
GCC switch, by patching affected ADRP instructions at runtime:
- ADRP instructions that do not appear at 4k relative offset 0xff8 or
  0xffc are ignored
- ADRP instructions that are within 1 MB of their target symbol are
  converted into ADR instructions
- remaining ADRP instructions are redirected via a veneer that performs
  the load using an unaffected movn/movk sequence.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: tidied up ADRP -> ADR instruction patching.]
[will: use ULL suffix for 64-bit immediate]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-09 13:21:53 +00:00
Andrey Konovalov
9597e74396 kasan, arm64: clean up KASAN_SHADOW_SCALE_SHIFT usage
This is a follow up patch to the series I sent recently that cleans up
KASAN_SHADOW_SCALE_SHIFT usage (which value was hardcoded and scattered
all over the code). This fixes the one place that I forgot to fix.

The change is purely aesthetical, instead of hardcoding the value for
KASAN_SHADOW_SCALE_SHIFT in arch/arm64/Makefile, an appropriate variable
is declared and used.

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-06 18:52:33 +00:00
Ard Biesheuvel
be0f272bfc arm64: ftrace: emit ftrace-mod.o contents through code
When building the arm64 kernel with both CONFIG_ARM64_MODULE_PLTS and
CONFIG_DYNAMIC_FTRACE enabled, the ftrace-mod.o object file is built
with the kernel and contains a trampoline that is linked into each
module, so that modules can be loaded far away from the kernel and
still reach the ftrace entry point in the core kernel with an ordinary
relative branch, as is emitted by the compiler instrumentation code
dynamic ftrace relies on.

In order to be able to build out of tree modules, this object file
needs to be included into the linux-headers or linux-devel packages,
which is undesirable, as it makes arm64 a special case (although a
precedent does exist for 32-bit PPC).

Given that the trampoline essentially consists of a PLT entry, let's
not bother with a source or object file for it, and simply patch it
in whenever the trampoline is being populated, using the existing
PLT support routines.

Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-12-01 13:04:59 +00:00
Jason A. Donenfeld
fb8722735f arm64: support __int128 on gcc 5+
Versions of gcc prior to gcc 5 emitted a __multi3 function call when
dealing with TI types, resulting in failures when trying to link to
libgcc, and more generally, bad performance. However, since gcc 5,
the compiler supports actually emitting fast instructions, which means
we can at long last enable this option and receive the speedups.

The gcc commit that added proper Aarch64 support is:
https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff;h=d1ae7bb994f49316f6f63e6173f2931e837a351d
This commit appears to be part of the gcc 5 release.

There are still a few instructions, __ashlti3 and __ashrti3, which
require libgcc, which is fine. Rather than linking to libgcc, we
simply provide them ourselves, since they're not that complicated.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-11-03 15:24:21 +00:00
Nick Desaulniers
fd9dde6abc arm64: prevent regressions in compressed kernel image size when upgrading to binutils 2.27
Upon upgrading to binutils 2.27, we found that our lz4 and gzip
compressed kernel images were significantly larger, resulting is 10ms
boot time regressions.

As noted by Rahul:
"aarch64 binaries uses RELA relocations, where each relocation entry
includes an addend value. This is similar to x86_64.  On x86_64, the
addend values are also stored at the relocation offset for relative
relocations. This is an optimization: in the case where code does not
need to be relocated, the loader can simply skip processing relative
relocations.  In binutils-2.25, both bfd and gold linkers did this for
x86_64, but only the gold linker did this for aarch64.  The kernel build
here is using the bfd linker, which stored zeroes at the relocation
offsets for relative relocations.  Since a set of zeroes compresses
better than a set of non-zero addend values, this behavior was resulting
in much better lz4 compression.

The bfd linker in binutils-2.27 is now storing the actual addend values
at the relocation offsets. The behavior is now consistent with what it
does for x86_64 and what gold linker does for both architectures.  The
change happened in this upstream commit:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=1f56df9d0d5ad89806c24e71f296576d82344613
Since a bunch of zeroes got replaced by non-zero addend values, we see
the side effect of lz4 compressed image being a bit bigger.

To get the old behavior from the bfd linker, "--no-apply-dynamic-relocs"
flag can be used:
$ LDFLAGS="--no-apply-dynamic-relocs" make
With this flag, the compressed image size is back to what it was with
binutils-2.25.

If the kernel is using ASLR, there aren't additional runtime costs to
--no-apply-dynamic-relocs, as the relocations will need to be applied
again anyway after the kernel is relocated to a random address.

If the kernel is not using ASLR, then presumably the current default
behavior of the linker is better. Since the static linker performed the
dynamic relocs, and the kernel is not moved to a different address at
load time, it can skip applying the relocations all over again."

Some measurements:

$ ld -v
GNU ld (binutils-2.25-f3d35cf6) 2.25.51.20141117
                    ^
$ ls -l vmlinux
-rwxr-x--- 1 ndesaulniers eng 300652760 Oct 26 11:57 vmlinux
$ ls -l Image.lz4-dtb
-rw-r----- 1 ndesaulniers eng 16932627 Oct 26 11:57 Image.lz4-dtb

$ ld -v
GNU ld (binutils-2.27-53dd00a1) 2.27.0.20170315
                    ^
pre patch:
$ ls -l vmlinux
-rwxr-x--- 1 ndesaulniers eng 300376208 Oct 26 11:43 vmlinux
$ ls -l Image.lz4-dtb
-rw-r----- 1 ndesaulniers eng 18159474 Oct 26 11:43 Image.lz4-dtb

post patch:
$ ls -l vmlinux
-rwxr-x--- 1 ndesaulniers eng 300376208 Oct 26 12:06 vmlinux
$ ls -l Image.lz4-dtb
-rw-r----- 1 ndesaulniers eng 16932466 Oct 26 12:06 Image.lz4-dtb

By Siqi's measurement w/ gzip:
binutils 2.27 with this patch (with --no-apply-dynamic-relocs):
Image 41535488
Image.gz 13404067

binutils 2.27 without this patch (without --no-apply-dynamic-relocs):
Image 41535488
Image.gz 14125516

Any compression scheme should be able to get better results from the
longer runs of zeros, not just GZIP and LZ4.

10ms boot time savings isn't anything to get excited about, but users of
arm64+compression+bfd-2.27 should not have to pay a penalty for no
runtime improvement.

Reported-by: Gopinath Elanchezhian <gelanchezhian@google.com>
Reported-by: Sindhuri Pentyala <spentyala@google.com>
Reported-by: Wei Wang <wvw@google.com>
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Rahul Chaudhry <rahulchaudhry@google.com>
Suggested-by: Siqi Lin <siqilin@google.com>
Suggested-by: Stephen Hines <srhines@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: added comment to Makefile]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-10-30 13:45:12 +00:00
Andrew Pinski
3d6a7b99e3 arm64: ensure the kernel is compiled for LP64
The kernel needs to be compiled as a LP64 binary for ARM64, even when
using a compiler that defaults to code-generation for the ILP32 ABI.
Consequently, we need to explicitly pass '-mabi=lp64' (supported on
gcc-4.9 and newer).

Signed-off-by: Andrew Pinski <Andrew.Pinski@caviumnetworks.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Reviewed-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-09-18 11:20:20 +01:00
Luc Van Oostenryck
bcde519e8c arm64: pass endianness info to sparse
ARM64 depends on the macro __AARCH64EB__ being defined or not
to correctly select or define endian-specific macros, structures
or pieces of code.

This macro is predefined by the compiler but sparse knows nothing
about it and thus may pre-process files differently from what
gcc would.

Fix this by passing '-D__AARCH64EL__' or '-D__AARCH64EB__' to
sparse depending of the endianness of the kernel, like defined
by GCC.

Note: In most case it won't change anything since most arm64 use
      little-endian (but an allyesconfig would use big-endian!).

CC: Catalin Marinas <catalin.marinas@arm.com>
CC: Will Deacon <will.deacon@arm.com>
CC: linux-arm-kernel@lists.infradead.org
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-06-26 10:15:06 +01:00
Luc Van Oostenryck
f5d284900c arm64: pass machine size to sparse
When using sparse on the arm64 tree we get many thousands of
warnings like 'constant ... is so big it is unsigned long long'
or 'shift too big (32) for type unsigned long'. This happens
because by default sparse considers the machine as 32bit and
defines the size of the types accordingly.

Fix this by passing the '-m64' flag to sparse so that
sparse can correctly define longs as being 64bit.

CC: Catalin Marinas <catalin.marinas@arm.com>
CC: Will Deacon <will.deacon@arm.com>
CC: linux-arm-kernel@lists.infradead.org
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-06-20 16:47:16 +01:00
Ard Biesheuvel
e71a4e1beb arm64: ftrace: add support for far branches to dynamic ftrace
Currently, dynamic ftrace support in the arm64 kernel assumes that all
core kernel code is within range of ordinary branch instructions that
occur in module code, which is usually the case, but is no longer
guaranteed now that we have support for module PLTs and address space
randomization.

Since on arm64, all patching of branch instructions involves function
calls to the same entry point [ftrace_caller()], we can emit the modules
with a trampoline that has unlimited range, and patch both the trampoline
itself and the branch instruction to redirect the call via the trampoline.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: minor clarification to smp_wmb() comment]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-06-07 11:52:02 +01:00
Linus Torvalds
23ea3f62f3 Kbuild misc updates for 4.12
- Clean up builddeb script
 
 - Use full path for KBUILD_IMAGE to fix rpm-pkg build
 
 - Fix objdiff tool to ignore debug info
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZE6tOAAoJED2LAQed4NsG2o4P/ii2YuHMrxUh5J6KbC1ilLLC
 aGcapg+CQ+pFqMeVIbofaEdJI/+vofajG8Eh5vVr8R4Hj3i7PA+2AFgg3cNe2hFE
 OSHJbb3YTkYJJzG+s+BynF1dla03Yyo/sOHoV4yRst/hiEJHpLlOJgieIM9bv8pq
 1DjBseHSrPGqUtvBuLoNwCbylhgyHiL5FycH//dpVbpNpoiy+HzSrcmXgT+rtbwJ
 qPEdf5QqapM0T83uxaYDko6VRYBIHOu9kQnVMUKS9+Qsqxm0NzO7Q8fFMdZpA8QY
 HCTFCQszeJid4VZO7VqKVCV40g3KGdAuCPPW7lZZO0H/AVEVqUv9PWOnuPCiyhJc
 ZXX7fmehvToHC0lbpC4GCHEQ9VxKF3KiNJUusDkFm63oSmvoaiRR2GGzWidpQ0eq
 l/lWB2/YygCQjs+kucDLhdIQjW89lkIBehXtZ28gkRYiLCbvQBpINHXrvZ/ai5uO
 hJ8hVyWnCkghm7alQDCktohMgRmcgUMPTByYcfbQG03vYBVITS9FBzvfSJgmRksQ
 DhPLakWq2Wlsx7DjjedELmO4JFn17oyi3av71lgiN5FjW9TBLxq3XmeHKu+avjEk
 LHisT5lCzh0YjyEhfSSkBtz2iyDBZhNUJKmw1Tf89owbKUMPnlxGjZtbmvQkv/qk
 5GdCH7YJG+XchdlDi70b
 =vptn
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-misc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull misc Kbuild updates from Masahiro Yamada:

 - clean up builddeb script

 - use full path for KBUILD_IMAGE to fix rpm-pkg build

 - fix objdiff tool to ignore debug info

* tag 'kbuild-misc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  builddeb: fix typo
  builddeb: Update a few outdated and hardcoded strings
  deb-pkg: Remove the KBUILD_IMAGE workaround
  unicore32: Use full path in KBUILD_IMAGE definition
  sh: Use full path in KBUILD_IMAGE definition
  arc: Use full path in KBUILD_IMAGE definition
  arm: Use full path in KBUILD_IMAGE definition
  arm64: Use full path in KBUILD_IMAGE definition
  scripts: objdiff: Ignore debug info when comparing
2017-05-10 20:41:43 -07:00
Marc Zyngier
d91750f12c arm64: Silence spurious kbuild warning on menuconfig
Since bbb56c2722 ("arm64: Add detection code for broken .inst support
in binutils"), running any make target that doesn't involve the cross
compiler results in a spurious warning:

$ make ARCH=arm64 menuconfig
arch/arm64/Makefile:43: Detected assembler with broken .inst; disassembly will be unreliable

while

$ make ARCH=arm64 CROSS_COMPILE=aarch64-arm-linux- menuconfig

is silent (assuming your compiler is not affected). That's because
the code that tests for the workaround is always run, irrespective
of the current configuration being available or not.

An easy fix is to make the detection conditional on CONFIG_ARM64
being defined, which is only the case when actually building
something.

Fixes: bbb56c2722 ("arm64: Add detection code for broken .inst support in binutils")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-04-12 09:48:03 +01:00
Michal Marek
06995804b5 arm64: Use full path in KBUILD_IMAGE definition
The KBUILD_IMAGE variable is used by the rpm and deb-pkg targets, which
expect it to point to the image file in the build directory. The
builddeb script has a workaround for architectures which only provide
the basename, but let's provide a clean interface for packaging tools.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Michal Marek <mmarek@suse.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-03-20 22:42:12 +09:00
Marc Zyngier
bbb56c2722 arm64: Add detection code for broken .inst support in binutils
Binutils version up to (and including) 2.25 have a pathological
behaviour when it comes to mixing .inst directive and arithmetic
involving labels. The assembler complains about non-constant
expressions and compilation stops pretty quickly.

In order to detect this and work around it, let's add a bit of
detection code that will set the CONFIG_BROKEN_GAS_INST option
should a broken gas be detected.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-12-06 15:54:21 +00:00
Ard Biesheuvel
b9dce7f1ba arm64: kernel: force ET_DYN ELF type for CONFIG_RELOCATABLE=y
GNU ld used to set the ELF file type to ET_DYN for PIE executables, which
is the same file type used for shared libraries. However, this was changed
recently, and now PIE executables are emitted as ET_EXEC instead.

The distinction is only relevant for ELF loaders, and so there is little
reason to care about the difference when building the kernel, which is
why the change has gone unnoticed until now.

However, debuggers do use the ELF binary, and expect ET_EXEC type files
to appear in memory at the exact offset described in the ELF metadata.
This means source level debugging is no longer possible when KASLR is in
effect or when executing the stub.

So add the -shared LD option when building with CONFIG_RELOCATABLE=y. This
forces the ELF file type to be set to ET_DYN (which is what you get when
building with binutils 2.24 and earlier anyway), and has no other ill
effects.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-10-20 11:37:25 +01:00
Michal Marek
cfa88c7946 arm64: Set UTS_MACHINE in the Makefile
The make rpm target depends on proper UTS_MACHINE definition.  Also, use
the variable in arch/arm64/kernel/setup.c, so that it's not accidentally
removed in the future.

Reported-and-tested-by: Fabian Vogt <fvogt@suse.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-08-31 12:31:38 +01:00
Will Deacon
6ffe9923f2 arm64: errata: Pass --fix-cortex-a53-843419 to ld if workaround enabled
Cortex-A53 erratum 843419 is worked around by the linker, although it is
a configure-time option to GCC as to whether ld is actually asked to
apply the workaround or not.

This patch ensures that we pass --fix-cortex-a53-843419 to the linker
when both CONFIG_ARM64_ERRATUM_843419=y and the linker supports the
option.

Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-08-26 11:33:22 +01:00
Linus Torvalds
194d6ad32e arm64 fixes:
- Fix HugeTLB leak due to CoW and PTE_RDONLY mismatch
 - Avoid accessing unmapped FDT fields when checking validity
 - Correctly account for vDSO AUX entry in ARCH_DLINFO
 - Fix kallsyms with absolute expressions in linker script
 - Kill unnecessary symbol-based relocs in vmlinux
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJXpFZ5AAoJELescNyEwWM0PI4IALsTuHRzClOSMDLiqMUj8t+5
 WNAcqybxAjCOVxAHckhweju++TeJBxcRH1nvBoNwiHIdHTv4fq1TZ3PeEq9kWMg5
 JbKjYjvd9dW8k6LXMya8iXCYtG3kzbNejkNpOTVebC86yvas1IiEjNb/ztPdhJeM
 HBSOkhfk8RcskfNxhuscZzGXbbdH9/R+XSTNRHN/RwCZH8PlInmduD9BbMvDhZyP
 NLFonD2IgQ4as1kYG/HdIcw0BamHiURjd043+gyoqMvm7JjPksRzlQnr91SMkX17
 LykXjHYPi2Me3aTrZ1NtkUNd5FHLHZ6/b9Wg6nA19d5KWkd3ER9uSJqGxkkbnt0=
 =dtGK
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:

 - fix HugeTLB leak due to CoW and PTE_RDONLY mismatch

 - avoid accessing unmapped FDT fields when checking validity

 - correctly account for vDSO AUX entry in ARCH_DLINFO

 - fix kallsyms with absolute expressions in linker script

 - kill unnecessary symbol-based relocs in vmlinux

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix copy-on-write referencing in HugeTLB
  arm64: mm: avoid fdt_check_header() before the FDT is fully mapped
  arm64: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO
  arm64: relocatable: suppress R_AARCH64_ABS64 relocations in vmlinux
  arm64: vmlinux.lds: make __rela_offset and __dynsym_offset ABSOLUTE
2016-08-06 08:58:59 -04:00
Ard Biesheuvel
08cc55b2af arm64: relocatable: suppress R_AARCH64_ABS64 relocations in vmlinux
The linker routines that we rely on to produce a relocatable PIE binary
treat it as a shared ELF object in some ways, i.e., it emits symbol based
R_AARCH64_ABS64 relocations into the final binary since doing so would be
appropriate when linking a shared library that is subject to symbol
preemption. (This means that an executable can override certain symbols
that are exported by a shared library it is linked with, and that the
shared library *must* update all its internal references as well, and point
them to the version provided by the executable.)

Symbol preemption does not occur for OS hosted PIE executables, let alone
for vmlinux, and so we would prefer to get rid of these symbol based
relocations. This would allow us to simplify the relocation routines, and
to strip the .dynsym, .dynstr and .hash sections from the binary. (Note
that these are tiny, and are placed in the .init segment, but they clutter
up the vmlinux binary.)

Note that these R_AARCH64_ABS64 relocations are only emitted for absolute
references to symbols defined in the linker script, all other relocatable
quantities are covered by anonymous R_AARCH64_RELATIVE relocations that
simply list the offsets to all 64-bit values in the binary that need to be
fixed up based on the offset between the link time and run time addresses.

Fortunately, GNU ld has a -Bsymbolic option, which is intended for shared
libraries to allow them to ignore symbol preemption, and unconditionally
bind all internal symbol references to its own definitions. So set it for
our PIE binary as well, and get rid of the asoociated sections and the
relocation code that processes them.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: fixed conflict with __dynsym_offset linker script entry]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-07-29 10:45:01 +01:00
Linus Torvalds
e831101a73 arm64 updates for 4.8:
- Kexec support for arm64
 - Kprobes support
 - Expose MIDR_EL1 and REVIDR_EL1 CPU identification registers to sysfs
 - Trapping of user space cache maintenance operations and emulation in
   the kernel (CPU errata workaround)
 - Clean-up of the early page tables creation (kernel linear mapping, EFI
   run-time maps) to avoid splitting larger blocks (e.g. pmds) into
   smaller ones (e.g. ptes)
 - VDSO support for CLOCK_MONOTONIC_RAW in clock_gettime()
 - ARCH_HAS_KCOV enabled for arm64
 - Optimise IP checksum helpers
 - SWIOTLB optimisation to only allocate/initialise the buffer if the
   available RAM is beyond the 32-bit mask
 - Properly handle the "nosmp" command line argument
 - Fix for the initialisation of the CPU debug state during early boot
 - vdso-offsets.h build dependency workaround
 - Build fix when RANDOMIZE_BASE is enabled with MODULES off
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXmF/UAAoJEGvWsS0AyF7x+jwP/2fErtX6FTXmdG0c3HBkTpuy
 gEuzN2ByWbP6Io+unLC6NvbQQb1q6c73PTqjsoeMHUx2o8YK3jgWEBcC+7AuepoZ
 YGl3r08e75a/fGrgNwEQQC1lNlgjpog4kzVDh5ji6oRXNq+OkjJGUtRPe3gBoqxv
 NAjviciID/MegQaq4SaMd26AmnjuUGKogo5vlIaXK0SemX9it+ytW7eLAXuVY+gW
 EvO3Nxk0Y5oZKJF8qRw6oLSmw1bwn2dD26OgfXfCiI30QBookRyWIoXRedUOZmJq
 D0+Tipd7muO4PbjlxS8aY/wd/alfnM5+TJ6HpGDo+Y1BDauXfiXMf3ktDFE5QvJB
 KgtICmC0stWwbDT35dHvz8sETsrCMA2Q/IMrnyxG+nj9BxVQU7rbNrxfCXesJy7Q
 4EsQbcTyJwu+ECildBezfoei99XbFZyWk2vKSkTCFKzgwXpftGFaffgZ3DIzBAHH
 IjecDqIFENC8ymrjyAgrGjeFG+2WB/DBgoSS3Baiz6xwQqC4wFMnI3jPECtJjb/U
 6e13f+onXu5lF1YFKAiRjGmqa/G1ZMr+uKZFsembuGqsZdAPkzzUHyAE9g4JVO8p
 t3gc3/M3T7oLSHuw4xi1/Ow5VGb2UvbslFrp7OpuFZ7CJAvhKlHL5rPe385utsFE
 7++5WHXHAegeJCDNAKY2
 =iJOY
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:

 - Kexec support for arm64

 - Kprobes support

 - Expose MIDR_EL1 and REVIDR_EL1 CPU identification registers to sysfs

 - Trapping of user space cache maintenance operations and emulation in
   the kernel (CPU errata workaround)

 - Clean-up of the early page tables creation (kernel linear mapping,
   EFI run-time maps) to avoid splitting larger blocks (e.g.  pmds) into
   smaller ones (e.g.  ptes)

 - VDSO support for CLOCK_MONOTONIC_RAW in clock_gettime()

 - ARCH_HAS_KCOV enabled for arm64

 - Optimise IP checksum helpers

 - SWIOTLB optimisation to only allocate/initialise the buffer if the
   available RAM is beyond the 32-bit mask

 - Properly handle the "nosmp" command line argument

 - Fix for the initialisation of the CPU debug state during early boot

 - vdso-offsets.h build dependency workaround

 - Build fix when RANDOMIZE_BASE is enabled with MODULES off

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits)
  arm64: arm: Fix-up the removal of the arm64 regs_query_register_name() prototype
  arm64: Only select ARM64_MODULE_PLTS if MODULES=y
  arm64: mm: run pgtable_page_ctor() on non-swapper translation table pages
  arm64: mm: make create_mapping_late() non-allocating
  arm64: Honor nosmp kernel command line option
  arm64: Fix incorrect per-cpu usage for boot CPU
  arm64: kprobes: Add KASAN instrumentation around stack accesses
  arm64: kprobes: Cleanup jprobe_return
  arm64: kprobes: Fix overflow when saving stack
  arm64: kprobes: WARN if attempting to step with PSTATE.D=1
  arm64: debug: remove unused local_dbg_{enable, disable} macros
  arm64: debug: remove redundant spsr manipulation
  arm64: debug: unmask PSTATE.D earlier
  arm64: localise Image objcopy flags
  arm64: ptrace: remove extra define for CPSR's E bit
  kprobes: Add arm64 case in kprobe example module
  arm64: Add kernel return probes support (kretprobes)
  arm64: Add trampoline code for kretprobes
  arm64: kprobes instruction simulation support
  arm64: Treat all entry code as non-kprobe-able
  ...
2016-07-27 11:16:05 -07:00
Mark Rutland
f8fa70f392 arm64: localise Image objcopy flags
We currently define OBJCOPYFLAGS in the top-level arm64 Makefile, and
thus these flags will be passed to all uses of objcopy, kernel-wide, for
which they are not explicitly overridden. The flags we set are intended
for converting vmlinux (and ELF) into Image (a raw binary), and thus the
flags chosen are problematic for some other uses which do not expect a
raw binary result, e.g. the upcoming lkdtm rodata test:

  http://www.openwall.com/lists/kernel-hardening/2016/06/08/2

This patch localises the objcopy flags such that they are only used for
the vmlinux -> Image conversion.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-19 15:30:23 +01:00
Kevin Brodsky
a66649dab3 arm64: fix vdso-offsets.h dependency
arm64/kernel/{vdso,signal}.c include vdso-offsets.h, as well as any
file that includes asm/vdso.h. Therefore, vdso-offsets.h must be
generated before these files are compiled.

The current rules in arm64/kernel/Makefile do not actually enforce
this, because even though $(obj)/vdso is listed as a prerequisite for
vdso-offsets.h, this does not result in the intended effect of
building the vdso subdirectory (before all the other objects). As a
consequence, depending on the order in which the rules are followed,
vdso-offsets.h is updated or not before arm64/kernel/{vdso,signal}.o
are built. The current rules also impose an unnecessary dependency on
vdso-offsets.h for all arm64/kernel/*.o, resulting in unnecessary
rebuilds. This is made obvious when using make -j:

  touch arch/arm64/kernel/vdso/gettimeofday.S && make -j$NCPUS arch/arm64/kernel

will sometimes result in none of arm64/kernel/*.o being
rebuilt, sometimes all of them, or even just some of them.

It is quite difficult to ensure that a header is generated before it
is used with recursive Makefiles by using normal rules.  Instead,
arch-specific generated headers are normally built in the archprepare
recipe in the arch Makefile (see for instance arch/ia64/Makefile).
Unfortunately, asm-offsets.h is included in gettimeofday.S, and must
therefore be generated before vdso-offsets.h, which is not the case if
archprepare is used. For this reason, a rule run after archprepare has
to be used.

This commit adds rules in arm64/Makefile to build vdso-offsets.h
during the prepare step, ensuring that vdso-offsets.h is generated
before building anything. It also removes the now-unnecessary
dependencies on vdso-offsets.h in arm64/kernel/Makefile. Finally, it
removes the duplication of asm-offsets.h between arm64/kernel/vdso/
and include/generated/ and makes include/generated/vdso-offsets.h a
target in arm64/kernel/vdso/Makefile.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Michal Marek <mmarek@suse.com>
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-11 17:10:11 +01:00
Masahiro Yamada
9ca4e58c20 arm64: fix boot image dependencies to not generate invalid images
I fixed boot image dependencies for arch/arm in commit 3939f33450
("ARM: 8418/1: add boot image dependencies to not generate invalid
images").

I see a similar problem for arch/arm64; "make -jN Image Image.gz"
would sometimes end up generating bad images where N > 1.

Fix the dependency in arch/arm64/Makefile to avoid the race
between "make Image" and "make Image.*".

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-06-21 20:10:18 +01:00
Mark Rutland
aed7eb8367 arm64: fix alignment when RANDOMIZE_TEXT_OFFSET is enabled
With ARM64_64K_PAGES and RANDOMIZE_TEXT_OFFSET enabled, we hit the
following issue on the boot:

kernel BUG at arch/arm64/mm/mmu.c:480!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0 #310
Hardware name: ARM Juno development board (r2) (DT)
task: ffff000008d58a80 ti: ffff000008d30000 task.ti: ffff000008d30000
PC is at map_kernel_segment+0x44/0xb0
LR is at paging_init+0x84/0x5b0
pc : [<ffff000008c450b4>] lr : [<ffff000008c451a4>] pstate: 600002c5

Call trace:
[<ffff000008c450b4>] map_kernel_segment+0x44/0xb0
[<ffff000008c451a4>] paging_init+0x84/0x5b0
[<ffff000008c42728>] setup_arch+0x198/0x534
[<ffff000008c40848>] start_kernel+0x70/0x388
[<ffff000008c401bc>] __primary_switched+0x30/0x74

Commit 7eb90f2ff7 ("arm64: cover the .head.text section in the .text
segment mapping") removed the alignment between the .head.text and .text
sections, and used the _text rather than the _stext interval for mapping
the .text segment.

Prior to this commit _stext was always section aligned and didn't cause
any issue even when RANDOMIZE_TEXT_OFFSET was enabled. Since that
alignment has been removed and _text is used to map the .text segment,
we need ensure _text is always page aligned when RANDOMIZE_TEXT_OFFSET
is enabled.

This patch adds logic to TEXT_OFFSET fuzzing to ensure that the offset
is always aligned to the kernel page size. To ensure this, we rely on
the PAGE_SHIFT being available via Kconfig.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: 7eb90f2ff7 ("arm64: cover the .head.text section in the .text segment mapping")
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-06-03 10:57:18 +01:00
Linus Torvalds
588ab3f9af arm64 updates for 4.6:
- Initial page table creation reworked to avoid breaking large block
   mappings (huge pages) into smaller ones. The ARM architecture requires
   break-before-make in such cases to avoid TLB conflicts but that's not
   always possible on live page tables
 
 - Kernel virtual memory layout: the kernel image is no longer linked to
   the bottom of the linear mapping (PAGE_OFFSET) but at the bottom of
   the vmalloc space, allowing the kernel to be loaded (nearly) anywhere
   in physical RAM
 
 - Kernel ASLR: position independent kernel Image and modules being
   randomly mapped in the vmalloc space with the randomness is provided
   by UEFI (efi_get_random_bytes() patches merged via the arm64 tree,
   acked by Matt Fleming)
 
 - Implement relative exception tables for arm64, required by KASLR
   (initial code for ARCH_HAS_RELATIVE_EXTABLE added to lib/extable.c but
   actual x86 conversion to deferred to 4.7 because of the merge
   dependencies)
 
 - Support for the User Access Override feature of ARMv8.2: this allows
   uaccess functions (get_user etc.) to be implemented using LDTR/STTR
   instructions. Such instructions, when run by the kernel, perform
   unprivileged accesses adding an extra level of protection. The
   set_fs() macro is used to "upgrade" such instruction to privileged
   accesses via the UAO bit
 
 - Half-precision floating point support (part of ARMv8.2)
 
 - Optimisations for CPUs with or without a hardware prefetcher (using
   run-time code patching)
 
 - copy_page performance improvement to deal with 128 bytes at a time
 
 - Sanity checks on the CPU capabilities (via CPUID) to prevent
   incompatible secondary CPUs from being brought up (e.g. weird
   big.LITTLE configurations)
 
 - valid_user_regs() reworked for better sanity check of the sigcontext
   information (restored pstate information)
 
 - ACPI parking protocol implementation
 
 - CONFIG_DEBUG_RODATA enabled by default
 
 - VDSO code marked as read-only
 
 - DEBUG_PAGEALLOC support
 
 - ARCH_HAS_UBSAN_SANITIZE_ALL enabled
 
 - Erratum workaround Cavium ThunderX SoC
 
 - set_pte_at() fix for PROT_NONE mappings
 
 - Code clean-ups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW6u95AAoJEGvWsS0AyF7xMyoP/3x2O6bgreSQ84BdO4JChN4+
 RQ9OVdX8u2ItO9sgaCY2AA6KoiBuEjGmPl/XRuK0I7DpODTtRjEXQHuNNhz8AelC
 hn4AEVqamY6Z5BzHFIjs8G9ydEbq+OXcKWEdwSsBhP/cMvI7ss3dps1f5iNPT5Vv
 50E/kUz+aWYy7pKlB18VDV7TUOA3SuYuGknWV8+bOY5uPb8hNT3Y3fHOg/EuNNN3
 DIuYH1V7XQkXtF+oNVIGxzzJCXULBE7egMcWAm1ydSOHK0JwkZAiL7OhI7ceVD0x
 YlDxBnqmi4cgzfBzTxITAhn3OParwN6udQprdF1WGtFF6fuY2eRDSH/L/iZoE4DY
 OulL951OsBtF8YC3+RKLk908/0bA2Uw8ftjCOFJTYbSnZBj1gWK41VkCYMEXiHQk
 EaN8+2Iw206iYIoyvdjGCLw7Y0oakDoVD9vmv12SOaHeQljTkjoN8oIlfjjKTeP7
 3AXj5v9BDMDVh40nkVayysRNvqe48Kwt9Wn0rhVTLxwdJEiFG/OIU6HLuTkretdN
 dcCNFSQrRieSFHpBK9G0vKIpIss1ZwLm8gjocVXH7VK4Mo/TNQe4p2/wAF29mq4r
 xu1UiXmtU3uWxiqZnt72LOYFCarQ0sFA5+pMEvF5W+NrVB0wGpXhcwm+pGsIi4IM
 LepccTgykiUBqW5TRzPz
 =/oS+
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:
 "Here are the main arm64 updates for 4.6.  There are some relatively
  intrusive changes to support KASLR, the reworking of the kernel
  virtual memory layout and initial page table creation.

  Summary:

   - Initial page table creation reworked to avoid breaking large block
     mappings (huge pages) into smaller ones.  The ARM architecture
     requires break-before-make in such cases to avoid TLB conflicts but
     that's not always possible on live page tables

   - Kernel virtual memory layout: the kernel image is no longer linked
     to the bottom of the linear mapping (PAGE_OFFSET) but at the bottom
     of the vmalloc space, allowing the kernel to be loaded (nearly)
     anywhere in physical RAM

   - Kernel ASLR: position independent kernel Image and modules being
     randomly mapped in the vmalloc space with the randomness is
     provided by UEFI (efi_get_random_bytes() patches merged via the
     arm64 tree, acked by Matt Fleming)

   - Implement relative exception tables for arm64, required by KASLR
     (initial code for ARCH_HAS_RELATIVE_EXTABLE added to lib/extable.c
     but actual x86 conversion to deferred to 4.7 because of the merge
     dependencies)

   - Support for the User Access Override feature of ARMv8.2: this
     allows uaccess functions (get_user etc.) to be implemented using
     LDTR/STTR instructions.  Such instructions, when run by the kernel,
     perform unprivileged accesses adding an extra level of protection.
     The set_fs() macro is used to "upgrade" such instruction to
     privileged accesses via the UAO bit

   - Half-precision floating point support (part of ARMv8.2)

   - Optimisations for CPUs with or without a hardware prefetcher (using
     run-time code patching)

   - copy_page performance improvement to deal with 128 bytes at a time

   - Sanity checks on the CPU capabilities (via CPUID) to prevent
     incompatible secondary CPUs from being brought up (e.g.  weird
     big.LITTLE configurations)

   - valid_user_regs() reworked for better sanity check of the
     sigcontext information (restored pstate information)

   - ACPI parking protocol implementation

   - CONFIG_DEBUG_RODATA enabled by default

   - VDSO code marked as read-only

   - DEBUG_PAGEALLOC support

   - ARCH_HAS_UBSAN_SANITIZE_ALL enabled

   - Erratum workaround Cavium ThunderX SoC

   - set_pte_at() fix for PROT_NONE mappings

   - Code clean-ups"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (99 commits)
  arm64: kasan: Fix zero shadow mapping overriding kernel image shadow
  arm64: kasan: Use actual memory node when populating the kernel image shadow
  arm64: Update PTE_RDONLY in set_pte_at() for PROT_NONE permission
  arm64: Fix misspellings in comments.
  arm64: efi: add missing frame pointer assignment
  arm64: make mrs_s prefixing implicit in read_cpuid
  arm64: enable CONFIG_DEBUG_RODATA by default
  arm64: Rework valid_user_regs
  arm64: mm: check at build time that PAGE_OFFSET divides the VA space evenly
  arm64: KVM: Move kvm_call_hyp back to its original localtion
  arm64: mm: treat memstart_addr as a signed quantity
  arm64: mm: list kernel sections in order
  arm64: lse: deal with clobbered IP registers after branch via PLT
  arm64: mm: dump: Use VA_START directly instead of private LOWEST_ADDR
  arm64: kconfig: add submenu for 8.2 architectural features
  arm64: kernel: acpi: fix ioremap in ACPI parking protocol cpu_postboot
  arm64: Add support for Half precision floating point
  arm64: Remove fixmap include fragility
  arm64: Add workaround for Cavium erratum 27456
  arm64: mm: Mark .rodata as RO
  ...
2016-03-17 20:03:47 -07:00
Ard Biesheuvel
1e48ef7fcc arm64: add support for building vmlinux as a relocatable PIE binary
This implements CONFIG_RELOCATABLE, which links the final vmlinux
image with a dynamic relocation section, allowing the early boot code
to perform a relocation to a different virtual address at runtime.

This is a prerequisite for KASLR (CONFIG_RANDOMIZE_BASE).

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-02-24 14:57:27 +00:00
Ard Biesheuvel
fd045f6cd9 arm64: add support for module PLTs
This adds support for emitting PLTs at module load time for relative
branches that are out of range. This is a prerequisite for KASLR, which
may place the kernel and the modules anywhere in the vmalloc area,
making it more likely that branch target offsets exceed the maximum
range of +/- 128 MB.

In this version, I removed the distinction between relocations against
.init executable sections and ordinary executable sections. The reason
is that it is hardly worth the trouble, given that .init.text usually
does not contain that many far branches, and this version now only
reserves PLT entry space for jump and call relocations against undefined
symbols (since symbols defined in the same module can be assumed to be
within +/- 128 MB)

For example, the mac80211.ko module (which is fairly sizable at ~400 KB)
built with -mcmodel=large gives the following relocation counts:

                    relocs    branches   unique     !local
  .text              3925       3347       518        219
  .init.text           11          8         7          1
  .exit.text            4          4         4          1
  .text.unlikely       81         67        36         17

('unique' means branches to unique type/symbol/addend combos, of which
!local is the subset referring to undefined symbols)

IOW, we are only emitting a single PLT entry for the .init sections, and
we are better off just adding it to the core PLT section instead.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-02-24 14:57:24 +00:00
Masahiro Yamada
8684fa3e7a arm64: kbuild: make "make install" not depend on vmlinux
For the same reason as commit 19514fc665 ("arm, kbuild: make "make
install" not depend on vmlinux"), the install targets should never
trigger the rebuild of the kernel.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-19 10:33:35 +00:00