In the case of a Periodic Synchronized Receiver,
the PA report received from a Broadcaster contains the BASE,
which has information about codec and other parameters of a BIG.
This isnformation is stored and the application can retrieve it
using getsockopt(BT_ISO_BASE).
Signed-off-by: Claudia Draghicescu <claudia.rosu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Not calling hci_(dis)connect_cfm before deleting conn referred to by a
socket generally results to use-after-free.
When cleaning up SCO connections when the parent ACL is deleted too
early, use hci_conn_failed to do the connection cleanup properly.
We also need to clean up ISO connections in a similar situation when
connecting has started but LE Create CIS is not yet sent, so do it too
here.
Fixes: ca1fd42e7d ("Bluetooth: Fix potential double free caused by hci_conn_unlink")
Reported-by: syzbot+cf54c1da6574b6c1b049@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/00000000000013b93805fbbadc50@google.com/
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There a few instances still using HCI_MAX_AD_LENGTH instead of using
max_adv_len which takes care of detecting what is the actual maximum
length depending on if the controller supports EA or not.
Fixes: 112b5090c2 ("Bluetooth: MGMT: Fix always using HCI_MAX_AD_LENGTH")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This commit implements defer setup support for the Broadcast Sink
scenario: By setting defer setup on a broadcast socket before calling
listen, the user is able to trigger the PA sync and BIG sync procedures
separately.
This is useful if the user first wants to synchronize to the periodic
advertising transmitted by a Broadcast Source, and trigger the BIG sync
procedure later on.
If defer setup is set, once a PA sync established event arrives, a new
hcon is created and notified to the ISO layer. A child socket associated
with the PA sync connection will be added to the accept queue of the
listening socket.
Once the accept call returns the fd for the PA sync child socket, the
user should call read on that fd. This will trigger the BIG create sync
procedure, and the PA sync socket will become a listening socket itself.
When the BIG sync established event is notified to the ISO layer, the
bis connections will be added to the accept queue of the PA sync parent.
The user should call accept on the PA sync socket to get the final bis
connections.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes sending BT_HCI_CMD_LE_CREATE_CONN_CANCEL when
hci_le_create_conn_sync has not been called because HCI_CONN_SCANNING
has been clear too early before its cmd_sync callback has been run.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use-after-free can occur in hci_disconnect_all_sync if a connection is
deleted by concurrent processing of a controller event.
To prevent this the code now tries to iterate over the list backwards
to ensure the links are cleanup before its parents, also it no longer
relies on a cursor, instead it always uses the last element since
hci_abort_conn_sync is guaranteed to call hci_conn_del.
UAF crash log:
==================================================================
BUG: KASAN: slab-use-after-free in hci_set_powered_sync
(net/bluetooth/hci_sync.c:5424) [bluetooth]
Read of size 8 at addr ffff888009d9c000 by task kworker/u9:0/124
CPU: 0 PID: 124 Comm: kworker/u9:0 Tainted: G W
6.5.0-rc1+ #10
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.2-1.fc38 04/01/2014
Workqueue: hci0 hci_cmd_sync_work [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x90
print_report+0xcf/0x670
? __virt_addr_valid+0xdd/0x160
? hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
kasan_report+0xa6/0xe0
? hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
? __pfx_set_powered_sync+0x10/0x10 [bluetooth]
hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
? __pfx_hci_set_powered_sync+0x10/0x10 [bluetooth]
? __pfx_lock_release+0x10/0x10
? __pfx_set_powered_sync+0x10/0x10 [bluetooth]
hci_cmd_sync_work+0x137/0x220 [bluetooth]
process_one_work+0x526/0x9d0
? __pfx_process_one_work+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? mark_held_locks+0x1a/0x90
worker_thread+0x92/0x630
? __pfx_worker_thread+0x10/0x10
kthread+0x196/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
Allocated by task 1782:
kasan_save_stack+0x33/0x60
kasan_set_track+0x25/0x30
__kasan_kmalloc+0x8f/0xa0
hci_conn_add+0xa5/0xa80 [bluetooth]
hci_bind_cis+0x881/0x9b0 [bluetooth]
iso_connect_cis+0x121/0x520 [bluetooth]
iso_sock_connect+0x3f6/0x790 [bluetooth]
__sys_connect+0x109/0x130
__x64_sys_connect+0x40/0x50
do_syscall_64+0x60/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 695:
kasan_save_stack+0x33/0x60
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2b/0x50
__kasan_slab_free+0x10a/0x180
__kmem_cache_free+0x14d/0x2e0
device_release+0x5d/0xf0
kobject_put+0xdf/0x270
hci_disconn_complete_evt+0x274/0x3a0 [bluetooth]
hci_event_packet+0x579/0x7e0 [bluetooth]
hci_rx_work+0x287/0xaa0 [bluetooth]
process_one_work+0x526/0x9d0
worker_thread+0x92/0x630
kthread+0x196/0x1e0
ret_from_fork+0x2c/0x50
==================================================================
Fixes: 182ee45da0 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
sk_getsockopt() runs locklessly. This means sk->sk_lingertime
can be read while other threads are changing its value.
Other reads also happen without socket lock being held,
and must be annotated.
Remove preprocessor logic using BITS_PER_LONG, compilers
are smart enough to figure this by themselves.
v2: fixed a clang W=1 (-Wtautological-constant-out-of-range-compare) warning
(Jakub)
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unify the type of tty_operations::write() counters with the 'count'
parameter. I.e. use size_t for them.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Link: https://lore.kernel.org/r/20230810091510.13006-37-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CIS/CIG ids of ISO connections are defined only when the connection
is unicast.
Fix the lookup functions to check for unicast first. Ensure CIG/CIS
IDs have valid value also in state BT_OPEN.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When user tries to connect a new CIS when its CIG is not configurable,
that connection shall fail, but pre-existing connections shall not be
affected. However, currently hci_cc_le_set_cig_params deletes all CIS
of the CIG on error so it doesn't work, even though controller shall not
change CIG/CIS configuration if the command fails.
Fix by failing on command error only the connections that are not yet
bound, so that we keep the previous CIS configuration like the
controller does.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove unnecessary NULL check which causes coccinelle warning:
net/bluetooth/coredump.c:104:2-7: WARNING: NULL check before some
freeing functions is not needed.
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
KSAN reports use-after-free in hci_add_adv_monitor().
While adding an adv monitor,
hci_add_adv_monitor() calls ->
msft_add_monitor_pattern() calls ->
msft_add_monitor_sync() calls ->
msft_le_monitor_advertisement_cb() calls in an error case ->
hci_free_adv_monitor() which frees the *moniter.
This is referenced by bt_dev_dbg() in hci_add_adv_monitor().
Fix the bt_dev_dbg() by using handle instead of monitor->handle.
Fixes: b747a83690 ("Bluetooth: hci_sync: Refactor add Adv Monitor")
Signed-off-by: Manish Mandlik <mmandlik@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Similar to commit c5d2b6fa26 ("Bluetooth: Fix use-after-free in
hci_remove_ltk/hci_remove_irk"). We can not access k after kfree_rcu()
call.
Fixes: d7d41682ef ("Bluetooth: Fix Suspicious RCU usage warnings")
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When running with concurrent task only one CIS was being assigned so
this attempts to rework the way the PDU is constructed so it is handled
later at the callback instead of in place.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This moves hci_is_le_conn_scanning to hci_core.h so it can be used by
different files without having to duplicate its code.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Only the number of CIS shall be limited to 0x1f, the CIS ID in the
other hand is up to 0xef.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces hci_conn_set_handle which takes care of verifying the
conditions where the hci_conn handle can be modified, including when
hci_conn_abort has been called and also checks that the handles is
valid as well.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Valid range of CIG/CIS are 0x00 to 0xEF, so this checks they are
properly checked before attempting to use HCI_OP_LE_SET_CIG_PARAMS.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Connections may be cleanup while waiting for the commands to complete so
this attempts to check if the connection handle remains valid in case of
errors that would lead to call hci_conn_failed:
BUG: KASAN: slab-use-after-free in hci_conn_failed+0x1f/0x160
Read of size 8 at addr ffff888001376958 by task kworker/u3:0/52
CPU: 0 PID: 52 Comm: kworker/u3:0 Not tainted
6.5.0-rc1-00527-g2dfe76d58d3a #5615
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.2-1.fc38 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x1d/0x70
print_report+0xce/0x620
? __virt_addr_valid+0xd4/0x150
? hci_conn_failed+0x1f/0x160
kasan_report+0xd1/0x100
? hci_conn_failed+0x1f/0x160
hci_conn_failed+0x1f/0x160
hci_abort_conn_sync+0x237/0x360
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When sending HCI_OP_CREATE_CONN_CANCEL it shall Wait for
HCI_EV_CONN_COMPLETE, not HCI_EV_CMD_STATUS, when the reason is
anything but HCI_ERROR_REMOTE_POWER_OFF. This reason is used when
suspending or powering off, where we don't want to wait for the peer's
response.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Dropped CIS that are in state BT_OPEN/BT_BOUND, and in state BT_CONNECT
with HCI_CONN_CREATE_CIS unset, should be cleaned up immediately.
Closing CIS ISO sockets should result to the hci_conn be deleted, so
that potentially pending CIG removal can run.
hci_abort_conn cannot refer to them by handle, since their handle is
still unset if Set CIG Parameters has not yet completed.
This fixes CIS not being terminated if the socket is shut down
immediately after connection, so that the hci_abort_conn runs before Set
CIG Parameters completes. See new BlueZ test "ISO Connect Close - Success"
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Calling hci_conn_del in __iso_sock_close is invalid. It needs
hdev->lock, but it cannot be acquired there due to lock ordering.
Fix this by doing cleanup via hci_conn_drop.
Return hci_conn with refcount 1 from hci_bind_cis and hci_connect_cis,
so that the iso_conn always holds one reference. This also fixes
refcounting when error handling.
Since hci_conn_abort shall handle termination of connections in any
state properly, we can handle BT_CONNECT socket state in the same way as
BT_CONNECTED.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is introduced in commit 903e454110 but was never implemented.
Fixes: 903e454110 ("Bluetooth: AMP: Use HCI cmd to Read Loc AMP Assoc")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for BT_PKT_STATUS socketopt by setting
BT_SK_PKT_STATUS. Then upon receiving an ISO packet the code would
attempt to store the Packet_Status_Flag to hci_skb_pkt_status which
is then forward to userspace in the form of BT_SCM_PKT_STATUS whenever
BT_PKT_STATUS has been enabled/set.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes the handling of BT_PKT_STATUS more generic so it can be
reused by sockets other than SCO like BT_DEFER_SETUP, etc.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If hci_unregister_dev() frees the hci_dev object but hci_suspend_notifier
may still be accessing it, it can cause the program to crash.
Here's the call trace:
<4>[102152.653246] Call Trace:
<4>[102152.653254] hci_suspend_sync+0x109/0x301 [bluetooth]
<4>[102152.653259] hci_suspend_dev+0x78/0xcd [bluetooth]
<4>[102152.653263] hci_suspend_notifier+0x42/0x7a [bluetooth]
<4>[102152.653268] notifier_call_chain+0x43/0x6b
<4>[102152.653271] __blocking_notifier_call_chain+0x48/0x69
<4>[102152.653273] __pm_notifier_call_chain+0x22/0x39
<4>[102152.653276] pm_suspend+0x287/0x57c
<4>[102152.653278] state_store+0xae/0xe5
<4>[102152.653281] kernfs_fop_write+0x109/0x173
<4>[102152.653284] __vfs_write+0x16f/0x1a2
<4>[102152.653287] ? selinux_file_permission+0xca/0x16f
<4>[102152.653289] ? security_file_permission+0x36/0x109
<4>[102152.653291] vfs_write+0x114/0x21d
<4>[102152.653293] __x64_sys_write+0x7b/0xdb
<4>[102152.653296] do_syscall_64+0x59/0x194
<4>[102152.653299] entry_SYSCALL_64_after_hwframe+0x5c/0xc1
This patch holds the reference count of the hci_dev object while
processing it in hci_suspend_notifier to avoid potential crash
caused by the race condition.
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
HCI_MAX_AD_LENGTH shall only be used if the controller doesn't support
extended advertising, otherwise HCI_MAX_EXT_AD_LENGTH shall be used
instead.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The hci_add_adv_monitor() hci_remove_adv_monitor() functions call
bt_dev_dbg() to print some debug statements. The bt_dev_dbg() macro
automatically adds in the device's name. That means that we shouldn't
include the name in the bt_dev_dbg() calls.
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some use cases require the user to be informed if BIG synchronization
fails. This commit makes it so that even if the BIG sync established
event arrives with error status, a new hconn is added for each BIS,
and the iso layer is notified about the failed connections.
Unsuccesful bis connections will be marked using the
HCI_CONN_BIG_SYNC_FAILED flag. From the iso layer, the POLLERR event
is triggered on the newly allocated bis sockets, before adding them
to the accept list of the parent socket.
From user space, a new fd for each failed bis connection will be
obtained by calling accept. The user should check for the POLLERR
event on the new socket, to determine if the connection was successful
or not.
The HCI_CONN_BIG_SYNC flag has been added to mark whether the BIG sync
has been successfully established. This flag is checked at bis cleanup,
so the HCI LE BIG Terminate Sync command is only issued if needed.
The BT_SK_BIG_SYNC flag indicates if BIG create sync has been called
for a listening socket, to avoid issuing the command everytime a BIGInfo
advertising report is received.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempts to always allocate a unique handle for connections so they
can be properly aborted by the likes of hci_abort_conn, so this uses the
invalid range as a pool of unset handles that way if userspace is trying
to create multiple connections at once each will be given a unique
handle which will be considered unset.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ISO_LINK connections where not being handled properly on
hci_abort_conn_sync which sometimes resulted in sending the wrong
commands, or in case of having the reject command being sent by the
socket code (iso.c) which is sort of a layer violation.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This consolidates code for aborting connections using
hci_cmd_sync_queue so it is synchronized with other threads, but
because of the fact that some commands may block the cmd_sync_queue
while waiting specific events this attempt to cancel those requests by
using hci_cmd_sync_cancel.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In the case of a Synchronized Receiver capable device, enable at start-up the
events for PA reports, PA Sync Established and Big Info Adv reports.
Signed-off-by: Claudia Draghicescu <claudia.rosu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for creating multiple BIGs. According to
spec, each BIG shall have an unique handle, and each BIG should
be associated with a different advertising handle. Otherwise,
the LE Create BIG command will fail, with error code
Command Disallowed (for reusing a BIG handle), or
Unknown Advertising Identifier (for reusing an advertising
handle).
The btmon snippet below shows an exercise for creating two BIGs
for the same controller, by opening two isotest instances with
the following command:
tools/isotest -i hci0 -s 00:00:00:00:00:00
< HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31
Handle: 0x00
Advertising Handle: 0x01
Number of BIS: 1
SDU Interval: 10000 us (0x002710)
Maximum SDU size: 40
Maximum Latency: 10 ms (0x000a)
RTN: 0x02
PHY: LE 2M (0x02)
Packing: Sequential (0x00)
Framing: Unframed (0x00)
Encryption: 0x00
Broadcast Code: 00000000000000000000000000000000
> HCI Event: Command Status (0x0f) plen 4
LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 21
LE Broadcast Isochronous Group Complete (0x1b)
Status: Success (0x00)
Handle: 0x00
BIG Synchronization Delay: 912 us (0x000390)
Transport Latency: 912 us (0x000390)
PHY: LE 2M (0x02)
NSE: 3
BN: 1
PTO: 1
IRC: 3
Maximum PDU: 40
ISO Interval: 10.00 msec (0x0008)
Connection Handle #0: 10
< HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068)
Handle: 0x01
Advertising Handle: 0x02
Number of BIS: 1
SDU Interval: 10000 us (0x002710)
Maximum SDU size: 40
Maximum Latency: 10 ms (0x000a)
RTN: 0x02
PHY: LE 2M (0x02)
Packing: Sequential (0x00)
Framing: Unframed (0x00)
Encryption: 0x00
Broadcast Code: 00000000000000000000000000000000
> HCI Event: Command Status (0x0f) plen 4
LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1
Status: Success (0x00)
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This stores scm_creds into hci_skb_cb so they can be properly forwarded
to the likes of btmon which is then able to print information about the
process who is originating the traffic:
bluetoothd[35]: @ MGMT Command: Rea.. (0x0001) plen 0 {0x0001}
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001}
Read Management Version Information (0x0001) plen 3
bluetoothd[35]: < ACL Data T.. flags 0x00 dlen 41
ATT: Write Command (0x52) len 36
Handle: 0x0043 Type: ASE Control Point (0x2bc6)
Data: 020203000110270000022800020a00409c0001000110270000022800020a00409c00
Opcode: QoS Configuration (0x02)
Number of ASE(s): 2
ASE: #0
ASE ID: 0x03
CIG ID: 0x00
CIS ID: 0x01
SDU Interval: 10000 usec
Framing: Unframed (0x00)
PHY: 0x02
LE 2M PHY (0x02)
Max SDU: 40
RTN: 2
Max Transport Latency: 10
Presentation Delay: 40000 us
ASE: #1
ASE ID: 0x01
CIG ID: 0x00
CIS ID: 0x01
SDU Interval: 10000 usec
Framing: Unframed (0x00)
PHY: 0x02
LE 2M PHY (0x02)
Max SDU: 40
RTN: 2
Max Transport Latency: 10
Presentation Delay: 40000 us
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure peer information is always available via sock when using
bt_sock_alloc.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This consolidates code around sk_alloc into bt_sock_alloc which does
take care of common initialization.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
LE Create CIS command shall not be sent before all CIS Established
events from its previous invocation have been processed. Currently it is
sent via hci_sync but that only waits for the first event, but there can
be multiple.
Make it wait for all events, and simplify the CIS creation as follows:
Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been
sent for the connection but it is not yet completed.
Make BT_CONNECT state to mean the connection wants Create CIS.
On events after which new Create CIS may need to be sent, send it if
possible and some connections need it. These events are:
hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis,
hci_le_cis_estabilished_evt.
The Create CIS status/completion events shall queue new Create CIS only
if at least one of the connections transitions away from BT_CONNECT, so
that we don't loop if controller is sending bogus events.
This fixes sending multiple CIS Create for the same CIS in the
"ISO AC 6(i) - Success" BlueZ test case:
< HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0]
Number of CIS: 2
CIS Handle: 257
ACL Handle: 42
CIS Handle: 258
ACL Handle: 42
> HCI Event: Command Status (0x0f) plen 4 #130 [hci0]
LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0]
LE Connected Isochronous Stream Established (0x19)
Status: Success (0x00)
Connection Handle: 257
...
< HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0]
...
> HCI Event: Command Complete (0x0e) plen 6 #133 [hci0]
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
...
< HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0]
Number of CIS: 1
CIS Handle: 258
ACL Handle: 42
> HCI Event: Command Status (0x0f) plen 4 #135 [hci0]
LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1
Status: ACL Connection Already Exists (0x0b)
> HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0]
LE Connected Isochronous Stream Established (0x19)
Status: Success (0x00)
Connection Handle: 258
...
Fixes: c09b80be6f ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is required for some configurations to have multiple BISes as part
of the same BIG.
Similar to the flow implemented for unicast, DEFER_SETUP will also be
used to bind multiple BISes for the same BIG, before starting Periodic
Advertising and creating the BIG.
The user will have to open a new socket for each BIS. By setting the
BT_DEFER_SETUP socket option and calling connect, a new connection
will be added for the BIG and advertising handle set by the socket
QoS parameters. Since all BISes will be bound for the same BIG and
advertising handle, the socket QoS options and base parameters should
match for all connections.
By calling connect on a socket that does not have the BT_DEFER_SETUP
option set, periodic advertising will be started and the BIG will
be created, with a BIS for each previously bound connection. Since
a BIG cannot be reconfigured with additional BISes after creation,
no more connections can be bound for the BIG after the start periodic
advertising and create BIG commands have been queued.
The bis_cleanup function has also been updated, so that the advertising
set and the BIG will not be terminated unless there are no more
bound or connected BISes.
The HCI_CONN_BIG_CREATED connection flag has been added to indicate
that the BIG has been successfully created. This flag is checked at
bis_cleanup, so that the BIG is only terminated if the
HCI_LE_Create_BIG_Complete has been received.
This implementation has been tested on hardware, using the "isotest"
tool with an additional command line option, to specify the number of
BISes to create as part of the desired BIG:
tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1
The btmon log shows that a BIG containing 2 BISes has been created:
< HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31
Handle: 0x01
Advertising Handle: 0x01
Number of BIS: 2
SDU Interval: 10000 us (0x002710)
Maximum SDU size: 40
Maximum Latency: 10 ms (0x000a)
RTN: 0x02
PHY: LE 2M (0x02)
Packing: Sequential (0x00)
Framing: Unframed (0x00)
Encryption: 0x00
Broadcast Code: 00000000000000000000000000000000
> HCI Event: Command Status (0x0f) plen 4
LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 23
LE Broadcast Isochronous Group Complete (0x1b)
Status: Success (0x00)
Handle: 0x01
BIG Synchronization Delay: 1974 us (0x0007b6)
Transport Latency: 1974 us (0x0007b6)
PHY: LE 2M (0x02)
NSE: 3
BN: 1
PTO: 1
IRC: 3
Maximum PDU: 40
ISO Interval: 10.00 msec (0x0008)
Connection Handle #0: 10
Connection Handle #1: 11
< HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13
Handle: 10
Data Path Direction: Input (Host to Controller) (0x00)
Data Path: HCI (0x00)
Coding Format: Transparent (0x03)
Company Codec ID: Ericsson Technology Licensing (0)
Vendor Codec ID: 0
Controller Delay: 0 us (0x000000)
Codec Configuration Length: 0
Codec Configuration:
> HCI Event: Command Complete (0x0e) plen 6
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
Status: Success (0x00)
Handle: 10
< HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13
Handle: 11
Data Path Direction: Input (Host to Controller) (0x00)
Data Path: HCI (0x00)
Coding Format: Transparent (0x03)
Company Codec ID: Ericsson Technology Licensing (0)
Vendor Codec ID: 0
Controller Delay: 0 us (0x000000)
Codec Configuration Length: 0
Codec Configuration:
> HCI Event: Command Complete (0x0e) plen 6
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
Status: Success (0x00)
Handle: 11
< ISO Data TX: Handle 10 flags 0x02 dlen 44
< ISO Data TX: Handle 11 flags 0x02 dlen 44
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 10
Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 11
Count: 1
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch checks for ISO_BROADCASTER and ISO_SYNC_RECEIVER in
controller.
Signed-off-by: Claudia Draghicescu <claudia.rosu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
tty->driver_data is 'void *', so there is no need to cast from that.
Therefore remove the casts and assign the pointer directly.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: linux-bluetooth@vger.kernel.org
Link: https://lore.kernel.org/r/20230731080244.2698-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function ‘fortify_memcpy_chk’,
inlined from ‘get_conn_info_complete’ at net/bluetooth/mgmt.c:7281:2:
include/linux/fortify-string.h:592:25: error: call to
‘__read_overflow2_field’ declared with attribute warning: detected read
beyond size of field (2nd parameter); maybe use struct_group()?
[-Werror=attribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
This is due to the wrong member is used for memcpy(). Use correct one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Operations that check/update sk_state and access conn should hold
lock_sock, otherwise they can race.
The order of taking locks is hci_dev_lock > lock_sock > sco_conn_lock,
which is how it is in connect/disconnect_cfm -> sco_conn_del ->
sco_chan_del.
Fix locking in sco_connect to take lock_sock around updating sk_state
and conn.
sco_conn_del must not occur during sco_connect, as it frees the
sco_conn. Hold hdev->lock longer to prevent that.
sco_conn_add shall return sco_conn with valid hcon. Make it so also when
reusing an old SCO connection waiting for disconnect timeout (see
__sco_sock_close where conn->hcon is set to NULL).
This should not reintroduce the issue fixed in the earlier
commit 9a8ec9e8eb ("Bluetooth: SCO: Fix possible circular locking
dependency on sco_connect_cfm"), the relevant fix of releasing lock_sock
in sco_sock_connect before acquiring hdev->lock is retained.
These changes mirror similar fixes earlier in ISO sockets.
Fixes: 9a8ec9e8eb ("Bluetooth: SCO: Fix possible circular locking dependency on sco_connect_cfm")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_connect_sco currently returns NULL when there is no link (i.e. when
hci_conn_link() returns NULL).
sco_connect() expects an ERR_PTR in case of any error (see line 266 in
sco.c). Thus, hcon set as NULL passes through to sco_conn_add(), which
tries to get hcon->hdev, resulting in dereferencing a NULL pointer as
reported by syzkaller.
The same issue exists for iso_connect_cis() calling hci_connect_cis().
Thus, make hci_connect_sco() and hci_connect_cis() return ERR_PTR
instead of NULL.
Reported-and-tested-by: syzbot+37acd5d80d00d609d233@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=37acd5d80d00d609d233
Fixes: 06149746e7 ("Bluetooth: hci_conn: Add support for linking multiple hcon")
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
KASAN reports that there's a use-after-free in
hci_remove_adv_monitor(). Trawling through the disassembly, you can
see that the complaint is from the access in bt_dev_dbg() under the
HCI_ADV_MONITOR_EXT_MSFT case. The problem case happens because
msft_remove_monitor() can end up freeing the monitor
structure. Specifically:
hci_remove_adv_monitor() ->
msft_remove_monitor() ->
msft_remove_monitor_sync() ->
msft_le_cancel_monitor_advertisement_cb() ->
hci_free_adv_monitor()
Let's fix the problem by just stashing the relevant data when it's
still valid.
Fixes: 7cf5c2978f ("Bluetooth: hci_sync: Refactor remove Adv Monitor")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
sk->sk_state indicates whether iso_pi(sk)->conn is valid. Operations
that check/update sk_state and access conn should hold lock_sock,
otherwise they can race.
The order of taking locks is hci_dev_lock > lock_sock > iso_conn_lock,
which is how it is in connect/disconnect_cfm -> iso_conn_del ->
iso_chan_del.
Fix locking in iso_connect_cis/bis and sendmsg/recvmsg to take lock_sock
around updating sk_state and conn.
iso_conn_del must not occur during iso_connect_cis/bis, as it frees the
iso_conn. Hold hdev->lock longer to prevent that.
This should not reintroduce the issue fixed in commit 241f51931c
("Bluetooth: ISO: Avoid circular locking dependency"), since the we
acquire locks in order. We retain the fix in iso_sock_connect to release
lock_sock before iso_connect_* acquires hdev->lock.
Similarly for commit 6a5ad251b7 ("Bluetooth: ISO: Fix possible
circular locking dependency"). We retain the fix in iso_conn_ready to
not acquire iso_conn_lock before lock_sock.
iso_conn_add shall return iso_conn with valid hcon. Make it so also when
reusing an old CIS connection waiting for disconnect timeout (see
__iso_sock_close where conn->hcon is set to NULL).
Trace with iso_conn_del after iso_chan_add in iso_connect_cis:
===============================================================
iso_sock_create:771: sock 00000000be9b69b7
iso_sock_init:693: sk 000000004dff667e
iso_sock_bind:827: sk 000000004dff667e 70:1a:b8:98:ff:a2 type 1
iso_sock_setsockopt:1289: sk 000000004dff667e
iso_sock_setsockopt:1289: sk 000000004dff667e
iso_sock_setsockopt:1289: sk 000000004dff667e
iso_sock_connect:875: sk 000000004dff667e
iso_connect_cis:353: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
hci_conn_add:1005: hci0 dst 28:3d:c2:4a:7e:da
iso_conn_add:140: hcon 000000007b65d182 conn 00000000daf8625e
__iso_chan_add:214: conn 00000000daf8625e
iso_connect_cfm:1700: hcon 000000007b65d182 bdaddr 28:3d:c2:4a:7e:da status 12
iso_conn_del:187: hcon 000000007b65d182 conn 00000000daf8625e, err 16
iso_sock_clear_timer:117: sock 000000004dff667e state 3
<Note: sk_state is BT_BOUND (3), so iso_connect_cis is still
running at this point>
iso_chan_del:153: sk 000000004dff667e, conn 00000000daf8625e, err 16
hci_conn_del:1151: hci0 hcon 000000007b65d182 handle 65535
hci_conn_unlink:1102: hci0: hcon 000000007b65d182
hci_chan_list_flush:2780: hcon 000000007b65d182
iso_sock_getsockopt:1376: sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_getsockopt:1376: sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e
iso_sock_shutdown:1434: sock 00000000be9b69b7, sk 000000004dff667e, how 1
__iso_sock_close:632: sk 000000004dff667e state 5 socket 00000000be9b69b7
<Note: sk_state is BT_CONNECT (5), even though iso_chan_del sets
BT_CLOSED (6). Only iso_connect_cis sets it to BT_CONNECT, so it
must be that iso_chan_del occurred between iso_chan_add and end of
iso_connect_cis.>
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 8000000006467067 P4D 8000000006467067 PUD 3f5f067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:__iso_sock_close (net/bluetooth/iso.c:664) bluetooth
===============================================================
Trace with iso_conn_del before iso_chan_add in iso_connect_cis:
===============================================================
iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
...
iso_conn_add:140: hcon 0000000093bc551f conn 00000000768ae504
hci_dev_put:1487: hci0 orig refcnt 21
hci_event_packet:7607: hci0: event 0x0e
hci_cmd_complete_evt:4231: hci0: opcode 0x2062
hci_cc_le_set_cig_params:3846: hci0: status 0x07
hci_sent_cmd_data:3107: hci0 opcode 0x2062
iso_connect_cfm:1703: hcon 0000000093bc551f bdaddr 28:3d:c2:4a:7e:da status 7
iso_conn_del:187: hcon 0000000093bc551f conn 00000000768ae504, err 12
hci_conn_del:1151: hci0 hcon 0000000093bc551f handle 65535
hci_conn_unlink:1102: hci0: hcon 0000000093bc551f
hci_chan_list_flush:2780: hcon 0000000093bc551f
__iso_chan_add:214: conn 00000000768ae504
<Note: this conn was already freed in iso_conn_del above>
iso_sock_clear_timer:117: sock 0000000098323f95 state 3
general protection fault, probably for non-canonical address 0x30b29c630930aec8: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1920 Comm: bluetoothd Tainted: G E 6.3.0-rc7+ #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:detach_if_pending+0x28/0xd0
Code: 90 90 0f 1f 44 00 00 48 8b 47 08 48 85 c0 0f 84 ad 00 00 00 55 89 d5 53 48 83 3f 00 48 89 fb 74 7d 66 90 48 8b 03 48 8b 53 08 <>
RSP: 0018:ffffb90841a67d08 EFLAGS: 00010007
RAX: 0000000000000000 RBX: ffff9141bd5061b8 RCX: 0000000000000000
RDX: 30b29c630930aec8 RSI: ffff9141fdd21e80 RDI: ffff9141bd5061b8
RBP: 0000000000000001 R08: 0000000000000000 R09: ffffb90841a67b88
R10: 0000000000000003 R11: ffffffff8613f558 R12: ffff9141fdd21e80
R13: 0000000000000000 R14: ffff9141b5976010 R15: ffff914185755338
FS: 00007f45768bd840(0000) GS:ffff9141fdd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000619000424074 CR3: 0000000009f5e005 CR4: 0000000000170ee0
Call Trace:
<TASK>
timer_delete+0x48/0x80
try_to_grab_pending+0xdf/0x170
__cancel_work+0x37/0xb0
iso_connect_cis+0x141/0x400 [bluetooth]
===============================================================
Trace with NULL conn->hcon in state BT_CONNECT:
===============================================================
__iso_sock_close:619: sk 00000000f7c71fc5 state 1 socket 00000000d90c5fe5
...
__iso_sock_close:619: sk 00000000f7c71fc5 state 8 socket 00000000d90c5fe5
iso_chan_del:153: sk 00000000f7c71fc5, conn 0000000022c03a7e, err 104
...
iso_sock_connect:862: sk 00000000129b56c3
iso_connect_cis:348: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7d:2a
hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7d:2a
hci_dev_hold:1495: hci0 orig refcnt 19
__iso_chan_add:214: conn 0000000022c03a7e
<Note: reusing old conn>
iso_sock_clear_timer:117: sock 00000000129b56c3 state 3
...
iso_sock_ready:1485: sk 00000000129b56c3
...
iso_sock_sendmsg:1077: sock 00000000e5013966, sk 00000000129b56c3
BUG: kernel NULL pointer dereference, address: 00000000000006a8
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1403 Comm: wireplumber Tainted: G E 6.3.0-rc7+ #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:iso_sock_sendmsg+0x63/0x2a0 [bluetooth]
===============================================================
Fixes: 241f51931c ("Bluetooth: ISO: Avoid circular locking dependency")
Fixes: 6a5ad251b7 ("Bluetooth: ISO: Fix possible circular locking dependency")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_update_accept_list_sync iterates over hdev->pend_le_conns and
hdev->pend_le_reports, and waits for controller events in the loop body,
without holding hdev lock.
Meanwhile, these lists and the items may be modified e.g. by
le_scan_cleanup. This can invalidate the list cursor or any other item
in the list, resulting to invalid behavior (eg use-after-free).
Use RCU for the hci_conn_params action lists. Since the loop bodies in
hci_sync block and we cannot use RCU or hdev->lock for the whole loop,
copy list items first and then iterate on the copy. Only the flags field
is written from elsewhere, so READ_ONCE/WRITE_ONCE should guarantee we
read valid values.
Free params everywhere with hci_conn_params_free so the cleanup is
guaranteed to be done properly.
This fixes the following, which can be triggered e.g. by BlueZ new
mgmt-tester case "Add + Remove Device Nowait - Success", or by changing
hci_le_set_cig_params to always return false, and running iso-tester:
==================================================================
BUG: KASAN: slab-use-after-free in hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
Read of size 8 at addr ffff888001265018 by task kworker/u3:0/32
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl (./arch/x86/include/asm/irqflags.h:134 lib/dump_stack.c:107)
print_report (mm/kasan/report.c:320 mm/kasan/report.c:430)
? __virt_addr_valid (./include/linux/mmzone.h:1915 ./include/linux/mmzone.h:2011 arch/x86/mm/physaddr.c:65)
? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
kasan_report (mm/kasan/report.c:538)
? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
? __pfx_hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2780)
? mutex_lock (kernel/locking/mutex.c:282)
? __pfx_mutex_lock (kernel/locking/mutex.c:282)
? __pfx_mutex_unlock (kernel/locking/mutex.c:538)
? __pfx_update_passive_scan_sync (net/bluetooth/hci_sync.c:2861)
hci_cmd_sync_work (net/bluetooth/hci_sync.c:306)
process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399)
worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538)
? __pfx_worker_thread (kernel/workqueue.c:2480)
kthread (kernel/kthread.c:376)
? __pfx_kthread (kernel/kthread.c:331)
ret_from_fork (arch/x86/entry/entry_64.S:314)
</TASK>
Allocated by task 31:
kasan_save_stack (mm/kasan/common.c:46)
kasan_set_track (mm/kasan/common.c:52)
__kasan_kmalloc (mm/kasan/common.c:374 mm/kasan/common.c:383)
hci_conn_params_add (./include/linux/slab.h:580 ./include/linux/slab.h:720 net/bluetooth/hci_core.c:2277)
hci_connect_le_scan (net/bluetooth/hci_conn.c:1419 net/bluetooth/hci_conn.c:1589)
hci_connect_cis (net/bluetooth/hci_conn.c:2266)
iso_connect_cis (net/bluetooth/iso.c:390)
iso_sock_connect (net/bluetooth/iso.c:899)
__sys_connect (net/socket.c:2003 net/socket.c:2020)
__x64_sys_connect (net/socket.c:2027)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
Freed by task 15:
kasan_save_stack (mm/kasan/common.c:46)
kasan_set_track (mm/kasan/common.c:52)
kasan_save_free_info (mm/kasan/generic.c:523)
__kasan_slab_free (mm/kasan/common.c:238 mm/kasan/common.c:200 mm/kasan/common.c:244)
__kmem_cache_free (mm/slub.c:1807 mm/slub.c:3787 mm/slub.c:3800)
hci_conn_params_del (net/bluetooth/hci_core.c:2323)
le_scan_cleanup (net/bluetooth/hci_conn.c:202)
process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399)
worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538)
kthread (kernel/kthread.c:376)
ret_from_fork (arch/x86/entry/entry_64.S:314)
==================================================================
Fixes: e8907f7654 ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The ISO Interval on CIS Established Event uses 1.25 ms slots:
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E
page 2304:
Time = N * 1.25 ms
In addition to that this always update the QoS settings based on CIS
Established Event.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use kmemdup rather than duplicating its implementation.
./net/bluetooth/hci_conn.c:1880:7-14: WARNING opportunity for kmemdup.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5597
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the driver core allows for struct class to be in read-only
memory, move the bt_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: linux-bluetooth@vger.kernel.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This rework sync_interval to be sync_factor as having sync_interval in
the order of seconds is sometimes not disarable.
Wit sync_factor the application can tell how many SDU intervals it wants
to send an announcement with PA, the EA interval is set to 2 times that
so a factor of 24 of BIG SDU interval of 10ms would look like the
following:
< HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25
Handle: 0x01
Properties: 0x0000
Min advertising interval: 480.000 msec (0x0300)
Max advertising interval: 480.000 msec (0x0300)
Channel map: 37, 38, 39 (0x07)
Own address type: Random (0x01)
Peer address type: Public (0x00)
Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
TX power: Host has no preference (0x7f)
Primary PHY: LE 1M (0x01)
Secondary max skip: 0x00
Secondary PHY: LE 2M (0x02)
SID: 0x00
Scan request notifications: Disabled (0x00)
< HCI Command: LE Set Periodic Advertising Parameters (0x08|0x003e) plen 7
Handle: 1
Min interval: 240.00 msec (0x00c0)
Max interval: 240.00 msec (0x00c0)
Properties: 0x0000
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When receiving a scan response there is no way to know if the remote
device is connectable or not, so when it cannot be merged don't
make any assumption and instead just mark it with a new flag defined as
MGMT_DEV_FOUND_SCAN_RSP so userspace can tell it is a standalone
SCAN_RSP.
Link: https://lore.kernel.org/linux-bluetooth/CABBYNZ+CYMsDSPTxBn09Js3BcdC-x7vZFfyLJ3ppZGGwJKmUTw@mail.gmail.com/
Fixes: c70a7e4cc8 ("Bluetooth: Add support for Not Connectable flag for Device Found events")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the event has error status, return right error code and don't show
incorrect "response malformed" messages.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When reconfiguring CIG after disconnection of the last CIS, LE Remove
CIG shall be sent before LE Set CIG Parameters. Otherwise, it fails
because CIG is in the inactive state and not configurable (Core v5.3
Vol 6 Part B Sec. 4.5.14.3). This ordering is currently wrong under
suitable timing conditions, because LE Remove CIG is sent via the
hci_sync queue and may be delayed, but Set CIG Parameters is via
hci_send_cmd.
Make the ordering well-defined by sending also Set CIG Parameters via
hci_sync.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Devices that lack persistent storage for the device address can indicate
this by setting the HCI_QUIRK_INVALID_BDADDR which causes the controller
to be marked as unconfigured until user space has set a valid address.
The related HCI_QUIRK_USE_BDADDR_PROPERTY was later added to similarly
indicate that the device lacks a valid address but that one may be
specified in the devicetree.
As is clear from commit 7a0e5b15ca ("Bluetooth: Add quirk for reading
BD_ADDR from fwnode property") that added and documented this quirk and
commits like de79a9df16 ("Bluetooth: btqcomsmd: use
HCI_QUIRK_USE_BDADDR_PROPERTY"), the device address of controllers with
this flag should be treated as invalid until user space has had a chance
to configure the controller in case the devicetree property is missing.
As it does not make sense to allow controllers with invalid addresses,
restore the original semantics, which also makes sure that the
implementation is consistent (e.g. get_missing_options() indicates that
the address must be set) and matches the documentation (including
comments in the code, such as, "In case any of them is set, the
controller has to start up as unconfigured.").
Fixes: e668eb1e15 ("Bluetooth: hci_core: Don't stop BT if the BD address missing in dts")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Devices that lack persistent storage for the device address can indicate
this by setting the HCI_QUIRK_INVALID_BDADDR which causes the controller
to be marked as unconfigured until user space has set a valid address.
Once configured, the device address must be set on every setup for
controllers with HCI_QUIRK_NON_PERSISTENT_SETUP to avoid marking the
controller as unconfigured and requiring the address to be set again.
Fixes: 740011cfe9 ("Bluetooth: Add new quirk for non-persistent setup settings")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix potential use-after-free in l2cap_le_command_rej.
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When receiving a connect response we should make sure that the DCID is
within the valid range and that we don't already have another channel
allocated for the same DCID.
Missing checks may violate the specification (BLUETOOTH CORE SPECIFICATION
Version 5.4 | Vol 3, Part A, Page 1046).
Fixes: 40624183c2 ("Bluetooth: L2CAP: Add missing checks for invalid LE DCID")
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The order of CIS handle array in Set CIG Parameters response shall match
the order of the CIS_ID array in the command (Core v5.3 Vol 4 Part E Sec
7.8.97). We send CIS_IDs mainly in the order of increasing CIS_ID (but
with "last" CIS first if it has fixed CIG_ID). In handling of the
reply, we currently assume this is also the same as the order of
hci_conn in hdev->conn_hash, but that is not true.
Match the correct hci_conn to the correct handle by matching them based
on the CIG+CIS combination. The CIG+CIS combination shall be unique for
ISO_LINK hci_conn at state >= BT_BOUND, which we maintain in
hci_le_set_cig_params.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Consider existing BOUND & CONNECT state CIS to block CIG removal.
Otherwise, under suitable timing conditions we may attempt to remove CIG
while Create CIS is pending, which fails.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
L2CAP assumes that the locks conn->chan_lock and chan->lock are
acquired in the order conn->chan_lock, chan->lock to avoid
potential deadlock.
For example, l2sock_shutdown acquires these locks in the order:
mutex_lock(&conn->chan_lock)
l2cap_chan_lock(chan)
However, l2cap_disconnect_req acquires chan->lock in
l2cap_get_chan_by_scid first and then acquires conn->chan_lock
before calling l2cap_chan_del. This means that these locks are
acquired in unexpected order, which leads to potential deadlock:
l2cap_chan_lock(c)
mutex_lock(&conn->chan_lock)
This patch releases chan->lock before acquiring the conn_chan_lock
to avoid the potential deadlock.
Fixes: a2a9339e1c ("Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}")
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since commit ec6cef9cd9 ("Bluetooth: Fix SMP channel registration for
unconfigured controllers") the debugfs interface for unconfigured
controllers will be created when the controller is configured.
There is however currently nothing preventing a controller from being
configured multiple time (e.g. setting the device address using btmgmt)
which results in failed attempts to register the already registered
debugfs entries:
debugfs: File 'features' in directory 'hci0' already present!
debugfs: File 'manufacturer' in directory 'hci0' already present!
debugfs: File 'hci_version' in directory 'hci0' already present!
...
debugfs: File 'quirk_simultaneous_discovery' in directory 'hci0' already present!
Add a controller flag to avoid trying to register the debugfs interface
more than once.
Fixes: ec6cef9cd9 ("Bluetooth: Fix SMP channel registration for unconfigured controllers")
Cc: stable@vger.kernel.org # 4.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When the HCI_UNREGISTER flag is set, no jobs should be scheduled. Fix
potential race when HCI_UNREGISTER is set after the flag is tested in
hci_cmd_sync_queue.
Fixes: 0b94f2651f ("Bluetooth: hci_sync: Fix queuing commands when HCI_UNREGISTER is set")
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Similar to commit 0f7d9b31ce ("netfilter: nf_tables: fix use-after-free
in nft_set_catchall_destroy()"). We can not access k after kfree_rcu()
call.
Cc: stable@vger.kernel.org
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make CIG auto-allocation to select the first CIG_ID that is still
configurable. Also use correct CIG_ID range (see Core v5.3 Vol 4 Part E
Sec 7.8.97 p.2553).
Previously, it would always select CIG_ID 0 regardless of anything,
because cis_list with data.cis == 0xff (BT_ISO_QOS_CIS_UNSET) would not
count any CIS. Since we are not adding CIS here, use find_cis instead.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When looking for CIS blocking CIG removal, consider only the CIS with
the right CIG ID. Don't try to remove CIG with unset CIG ID.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently, hci_conn_del calls hci_conn_unlink for BR/EDR, (e)SCO, and
CIS connections, i.e., everything except LE connections. However, if
(e)SCO connections are unlinked when BR/EDR disconnects, CIS connections
should also be unlinked when LE disconnects.
In terms of disconnection behavior, CIS and (e)SCO connections are not
too different. One peculiarity of CIS is that when CIS connections are
disconnected, the CIS handle isn't deleted, as per [BLUETOOTH CORE
SPECIFICATION Version 5.4 | Vol 4, Part E] 7.1.6 Disconnect command:
All SCO, eSCO, and CIS connections on a physical link should be
disconnected before the ACL connection on the same physical
connection is disconnected. If it does not, they will be
implicitly disconnected as part of the ACL disconnection.
...
Note: As specified in Section 7.7.5, on the Central, the handle
for a CIS remains valid even after disconnection and, therefore,
the Host can recreate a disconnected CIS at a later point in
time using the same connection handle.
Since hci_conn_link invokes both hci_conn_get and hci_conn_hold,
hci_conn_unlink should perform both hci_conn_put and hci_conn_drop as
well. However, currently it performs only hci_conn_put.
This patch makes hci_conn_unlink call hci_conn_drop as well, which
simplifies the logic in hci_conn_del a bit and may benefit future users
of hci_conn_unlink. But it is noted that this change additionally
implies that hci_conn_unlink can queue disc_work on conn itself, with
the following call stack:
hci_conn_unlink(conn) [conn->parent == NULL]
-> hci_conn_unlink(child) [child->parent == conn]
-> hci_conn_drop(child->parent)
-> queue_delayed_work(&conn->disc_work)
Queued disc_work after hci_conn_del can be spurious, so during the
process of hci_conn_del, it is necessary to make the call to
cancel_delayed_work(&conn->disc_work) after invoking hci_conn_unlink.
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit 06149746e7 ("Bluetooth: hci_conn: Add support for linking
multiple hcon") reintroduced a previously fixed bug [1] ("KASAN:
slab-use-after-free Read in hci_conn_hash_flush"). This bug was
originally fixed by commit 5dc7d23e16 ("Bluetooth: hci_conn: Fix
possible UAF").
The hci_conn_unlink function was added to avoid invalidating the link
traversal caused by successive hci_conn_del operations releasing extra
connections. However, currently hci_conn_unlink itself also releases
extra connections, resulted in the reintroduced bug.
This patch follows a more robust solution for cleaning up all
connections, by repeatedly removing the first connection until there are
none left. This approach does not rely on the inner workings of
hci_conn_del and ensures proper cleanup of all connections.
Meanwhile, we need to make sure that hci_conn_del never fails. Indeed it
doesn't, as it now always returns zero. To make this a bit clearer, this
patch also changes its return type to void.
Reported-by: syzbot+8bb72f86fc823817bc5d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/000000000000aa920505f60d25ad@google.com/
Fixes: 06149746e7 ("Bluetooth: hci_conn: Add support for linking multiple hcon")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If hci_conn_put(conn->parent) reduces conn->parent's reference count to
zero, it can immediately deallocate conn->parent. At the same time,
conn->link->list has its head in conn->parent, causing use-after-free
problems in the latter list_del_rcu(&conn->link->list).
This problem can be easily solved by reordering the two operations,
i.e., first performing the list removal with list_del_rcu and then
decreasing the refcnt with hci_conn_put.
Reported-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Closes: https://lore.kernel.org/linux-bluetooth/CABBYNZ+1kce8_RJrLNOXd_8=Mdpb=2bx4Nto-hFORk=qiOkoCg@mail.gmail.com/
Fixes: 06149746e7 ("Bluetooth: hci_conn: Add support for linking multiple hcon")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
This makes sure hci_cmd_sync_queue only queue new work if HCI_RUNNING
has been set otherwise there is a risk of commands being sent while
turning off.
Because hci_cmd_sync_queue can no longer queue work while HCI_RUNNING is
not set it cannot be used to power on adapters so instead
hci_cmd_sync_submit is introduced which bypass the HCI_RUNNING check, so
it behaves like the old implementation.
Link: https://lore.kernel.org/all/CAB4PzUpDMvdc8j2MdeSAy1KkAE-D3woprCwAdYWeOc-3v3c9Sw@mail.gmail.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some of the sync commands might take a long time to complete, e.g.
LE Create Connection when the peer device isn't responding might take
20 seconds before it times out. If suspend command is issued during
this time, it will need to wait for completion since both commands are
using the same sync lock.
This patch cancel any running sync commands before attempting to
suspend or adapter power off.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
API hci_devcd_init() stores its u32 type parameter @dump_size into
skb, but it does not specify which byte order is used to store the
integer, let us take little endian to store and parse the integer.
Fixes: f5cc609d09d4 ("Bluetooth: Add support for hci devcoredump")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Previously, capability was checked using capable(), which verified that the
caller of the ioctl system call had the required capability. In addition,
the result of the check would be stored in the HCI_SOCK_TRUSTED flag,
making it persistent for the socket.
However, malicious programs can abuse this approach by deliberately sharing
an HCI socket with a privileged task. The HCI socket will be marked as
trusted when the privileged task occasionally makes an ioctl call.
This problem can be solved by using sk_capable() to check capability, which
ensures that not only the current task but also the socket opener has the
specified capability, thus reducing the risk of privilege escalation
through the previously identified vulnerability.
Cc: stable@vger.kernel.org
Fixes: f81f5b2db8 ("Bluetooth: Send control open and close messages for HCI raw sockets")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Previously, channel open messages were always sent to monitors on the first
ioctl() call for unbound HCI sockets, even if the command and arguments
were completely invalid. This can leave an exploitable hole with the abuse
of invalid ioctl calls.
This commit hardens the ioctl processing logic by first checking if the
command is valid, and immediately returning with an ENOIOCTLCMD error code
if it is not. This ensures that ioctl calls with invalid commands are free
of side effects, and increases the difficulty of further exploitation by
forcing exploitation to find a way to pass a valid command first.
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Co-developed-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The ATS2851 based controller advertises support for command "LE Set Random
Private Address Timeout" but does not actually implement it, impeding the
controller initialization.
Add the quirk HCI_QUIRK_BROKEN_SET_RPA_TIMEOUT to unblock the controller
initialization.
< HCI Command: LE Set Resolvable Private... (0x08|0x002e) plen 2
Timeout: 900 seconds
> HCI Event: Command Status (0x0f) plen 4
LE Set Resolvable Private Address Timeout (0x08|0x002e) ncmd 1
Status: Unknown HCI Command (0x01)
Co-developed-by: imoc <wzj9912@gmail.com>
Signed-off-by: imoc <wzj9912@gmail.com>
Signed-off-by: Raul Cheleguini <raul.cheleguini@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When submitting HCI_OP_LE_CREATE_CIS the code shall wait for
HCI_EVT_LE_CIS_ESTABLISHED thus enforcing the serialization of
HCI_OP_LE_CREATE_CIS as the Core spec does not allow to send them in
parallel:
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E page 2566:
If the Host issues this command before all the HCI_LE_CIS_Established
events from the previous use of the command have been generated, the
Controller shall return the error code Command Disallowed (0x0C).
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes only matching CIS by address which prevents creating new hcon
if upper layer is requesting a specific CIS ID.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since it is required for some configurations to have multiple CIS with
the same peer which is now covered by iso-tester in the following test
cases:
ISO AC 6(i) - Success
ISO AC 7(i) - Success
ISO AC 8(i) - Success
ISO AC 9(i) - Success
ISO AC 11(i) - Success
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove extra line setting the broadcast code parameter of the
hci_cp_le_create_big struct to 0. The broadcast code is copied
from the QoS struct.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fixed a wrong indentation before "return".This line uses a 7 space
indent instead of a tab.
Signed-off-by: Lanzhe Li <u202212060@hust.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables 2M and Coded PHY by default if they are marked as supported
in the LE features bits.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Split bt_iso_qos into dedicated unicast and broadcast
structures and add additional broadcast parameters.
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add devcoredump APIs to hci core so that drivers only have to provide
the dump skbs instead of managing the synchronization and timeouts.
The devcoredump APIs should be used in the following manner:
- hci_devcoredump_init is called to allocate the dump.
- hci_devcoredump_append is called to append any skbs with dump data
OR hci_devcoredump_append_pattern is called to insert a pattern.
- hci_devcoredump_complete is called when all dump packets have been
sent OR hci_devcoredump_abort is called to indicate an error and
cancel an ongoing dump collection.
The high level APIs just prepare some skbs with the appropriate data and
queue it for the dump to process. Packets part of the crashdump can be
intercepted in the driver in interrupt context and forwarded directly to
the devcoredump APIs.
Internally, there are 5 states for the dump: idle, active, complete,
abort and timeout. A devcoredump will only be in active state after it
has been initialized. Once active, it accepts data to be appended,
patterns to be inserted (i.e. memset) and a completion event or an abort
event to generate a devcoredump. The timeout is initialized at the same
time the dump is initialized (defaulting to 10s) and will be cleared
either when the timeout occurs or the dump is complete or aborted.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Manish Mandlik <mmandlik@google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some adapters (e.g. RTL8723CS) advertise that they have more than
2 pages for local ext features, but they don't support any features
declared in these pages. RTL8723CS reports max_page = 2 and declares
support for sync train and secure connection, but it responds with
either garbage or with error in status on corresponding commands.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Bastian Germann <bage@debian.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This delays the identity address updates to give time for userspace to
process the new address otherwise there is a risk that userspace
creates a duplicated device if the MGMT event is delayed for some
reason.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This removes the following duplicate statement in
hci_le_ext_directed_advertising_sync():
cp.own_addr_type = own_addr_type;
Signed-off-by: Inga Stotland <inga.stotland@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The msft_set_filter_enable() command was using the deprecated
hci_request mechanism rather than hci_sync. This caused the warning error:
hci0: HCI_REQ-0xfcf0
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently, when we initiate disconnection, we will wait for the peer's
reply unless when we are suspending, where we fire and forget the
disconnect request.
A similar case is when adapter is powering off. However, we still wait
for the peer's reply in this case. Therefore, if the peer is
unresponsive, the command will time out and the power off sequence
will fail, causing "bluetooth powered on by itself" to users.
This patch makes the host doesn't wait for the peer's reply when the
disconnection reason is powering off.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the following new warning:
net/bluetooth/hci_sync.c:2403 hci_pause_addr_resolution() warn: missing
error code? 'err'
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202302251952.xryXOegd-lkp@intel.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Similar to commit d0be8347c6 ("Bluetooth: L2CAP: Fix use-after-free
caused by l2cap_chan_put"), just use l2cap_chan_hold_unless_zero to
prevent referencing a channel that is about to be destroyed.
Cc: stable@kernel.org
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Min Li <lm0963hack@gmail.com>
This patch enables ISO data rx on broadcast sink.
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Claudia Draghicescu <claudia.rosu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is a potential race condition in hidp_session_thread that may
lead to use-after-free. For instance, the timer is active while
hidp_del_timer is called in hidp_session_thread(). After hidp_session_put,
then 'session' will be freed, causing kernel panic when hidp_idle_timeout
is running.
The solution is to use del_timer_sync instead of del_timer.
Here is the call trace:
? hidp_session_probe+0x780/0x780
call_timer_fn+0x2d/0x1e0
__run_timers.part.0+0x569/0x940
hidp_session_probe+0x780/0x780
call_timer_fn+0x1e0/0x1e0
ktime_get+0x5c/0xf0
lapic_next_deadline+0x2c/0x40
clockevents_program_event+0x205/0x320
run_timer_softirq+0xa9/0x1b0
__do_softirq+0x1b9/0x641
__irq_exit_rcu+0xdc/0x190
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0xa1/0xc0
Cc: stable@vger.kernel.org
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes errors like bellow when LE Connection times out since that
is actually not a controller error:
Bluetooth: hci0: Opcode 0x200d failed: -110
Bluetooth: hci0: request failed to create LE connection: err -110
Instead the code shall properly detect if -ETIMEDOUT is returned and
send HCI_OP_LE_CREATE_CONN_CANCEL to give up on the connection.
Link: https://github.com/bluez/bluez/issues/340
Fixes: 8e8b92ee60 ("Bluetooth: hci_sync: Add hci_le_create_conn_sync")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_connect_le_scan_cleanup shall always be invoked to cleanup the
states and re-enable passive scanning if necessary, otherwise it may
cause the pending action to stay active causing multiple attempts to
connect.
Fixes: 9b3628d79b ("Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MGMT command: MGMT_OP_ADD_ADV_PATTERNS_MONITOR_RSSI uses variable
length argument. This causes host not able to register advmon with rssi.
This patch has been locally tested by adding monitor with rssi via
btmgmt on a kernel 6.1 machine.
Reviewed-by: Archie Pusaka <apusaka@chromium.org>
Fixes: b338d91703 ("Bluetooth: Implement support for Mesh")
Signed-off-by: Howard Chung <howardchung@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
L2CAP_ECRED_CONN_REQ shall be responded with L2CAP_ECRED_CONN_RSP not
L2CAP_LE_CONN_RSP:
L2CAP LE EATT Server - Reject - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x15
Unexpected L2CAP response code (expected 0x18)
L2CAP LE EATT Server - Reject - test failed
> ACL Data RX: Handle 42 flags 0x02 dlen 26
LE L2CAP: Enhanced Credit Connection Request (0x17) ident 1 len 18
PSM: 39 (0x0027)
MTU: 64
MPS: 64
Credits: 5
Source CID: 65
Source CID: 66
Source CID: 67
Source CID: 68
Source CID: 69
< ACL Data TX: Handle 42 flags 0x00 dlen 16
LE L2CAP: LE Connection Response (0x15) ident 1 len 8
invalid size
00 00 00 00 00 00 06 00
L2CAP LE EATT Server - Reject - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x18
L2CAP LE EATT Server - Reject - test passed
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Bluetooth mesh experimental feature enable was requiring the
controller to be powered off in order for the Enable to work. Mesh is
supposed to be enablable regardless of the controller state, and created
an unintended requirement that the mesh daemon be started before the
classic bluetoothd daemon.
Fixes: af6bcc1921 ("Bluetooth: Add experimental wrapper for MGMT based mesh")
Signed-off-by: Brian Gix <brian.gix@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is a potential race condition in hci_cmd_sync_work and
hci_cmd_sync_clear, and could lead to use-after-free. For instance,
hci_cmd_sync_work is added to the 'req_workqueue' after cancel_work_sync
The entry of 'cmd_sync_work_list' may be freed in hci_cmd_sync_clear, and
causing kernel panic when it is used in 'hci_cmd_sync_work'.
Here's the call trace:
dump_stack_lvl+0x49/0x63
print_report.cold+0x5e/0x5d3
? hci_cmd_sync_work+0x282/0x320
kasan_report+0xaa/0x120
? hci_cmd_sync_work+0x282/0x320
__asan_report_load8_noabort+0x14/0x20
hci_cmd_sync_work+0x282/0x320
process_one_work+0x77b/0x11c0
? _raw_spin_lock_irq+0x8e/0xf0
worker_thread+0x544/0x1180
? poll_idle+0x1e0/0x1e0
kthread+0x285/0x320
? process_one_work+0x11c0/0x11c0
? kthread_complete_and_exit+0x30/0x30
ret_from_fork+0x22/0x30
</TASK>
Allocated by task 266:
kasan_save_stack+0x26/0x50
__kasan_kmalloc+0xae/0xe0
kmem_cache_alloc_trace+0x191/0x350
hci_cmd_sync_queue+0x97/0x2b0
hci_update_passive_scan+0x176/0x1d0
le_conn_complete_evt+0x1b5/0x1a00
hci_le_conn_complete_evt+0x234/0x340
hci_le_meta_evt+0x231/0x4e0
hci_event_packet+0x4c5/0xf00
hci_rx_work+0x37d/0x880
process_one_work+0x77b/0x11c0
worker_thread+0x544/0x1180
kthread+0x285/0x320
ret_from_fork+0x22/0x30
Freed by task 269:
kasan_save_stack+0x26/0x50
kasan_set_track+0x25/0x40
kasan_set_free_info+0x24/0x40
____kasan_slab_free+0x176/0x1c0
__kasan_slab_free+0x12/0x20
slab_free_freelist_hook+0x95/0x1a0
kfree+0xba/0x2f0
hci_cmd_sync_clear+0x14c/0x210
hci_unregister_dev+0xff/0x440
vhci_release+0x7b/0xf0
__fput+0x1f3/0x970
____fput+0xe/0x20
task_work_run+0xd4/0x160
do_exit+0x8b0/0x22a0
do_group_exit+0xba/0x2a0
get_signal+0x1e4a/0x25b0
arch_do_signal_or_restart+0x93/0x1f80
exit_to_user_mode_prepare+0xf5/0x1a0
syscall_exit_to_user_mode+0x26/0x50
ret_from_fork+0x15/0x30
Fixes: 6a98e3836f ("Bluetooth: Add helper for serialized HCI command execution")
Cc: stable@vger.kernel.org
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use correct HCI ISO data packet header struct when the packet has
timestamp. The timestamp, when present, goes before the other fields
(Core v5.3 4E 5.4.5), so the structs are not compatible.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Because some transports don't have a dedicated type for ISO packets
(see 14202eff21) they may use ACL type
when in fact they are ISO packets.
In the past this was left for the driver to detect such thing but it
creates a problem when using the likes of btproxy when used by a VM as
the host would not be aware of the connection the guest is doing it
won't be able to detect such behavior, so this make bt_recv_frame
detect when it happens as it is the common interface to all drivers
including guest VMs.
Fixes: 14202eff21 ("Bluetooth: btusb: Detect if an ACL packet is in fact an ISO packet")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The address resolution should be disabled during the active scan,
so all the advertisements can reach the host. The advertising
has to be paused before disabling the address resolution,
because the advertising will prevent any changes to the resolving
list and the address resolution status. Skipping this will cause
the hci error and the discovery failure.
According to the bluetooth specification:
"7.8.44 LE Set Address Resolution Enable command
This command shall not be used when:
- Advertising (other than periodic advertising) is enabled,
- Scanning is enabled, or
- an HCI_LE_Create_Connection, HCI_LE_Extended_Create_Connection, or
HCI_LE_Periodic_Advertising_Create_Sync command is outstanding."
If the host is using RPA, the controller needs to generate RPA for
the advertising, so the advertising must remain paused during the
active scan.
If the host is not using RPA, the advertising can be resumed after
disabling the address resolution.
Fixes: 9afc675ede ("Bluetooth: hci_sync: allow advertise when scan without RPA")
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The module pointer in class_create() never actually did anything, and it
shouldn't have been requred to be set as a parameter even if it did
something. So just remove it and fix up all callers of the function in
the kernel tree at the same time.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big set of serial and tty driver updates for 6.3-rc1.
Once again, Jiri and Ilpo have done a number of core vt and tty/serial
layer cleanups that were much needed and appreciated. Other than that,
it's just a bunch of little tty/serial driver updates:
- qcom-geni-serial driver updates
- liteuart driver updates
- hvcs driver cleanups
- n_gsm updates and additions for new features
- more 8250 device support added
- fpga/dfl update and additions
- imx serial driver updates
- fsl_lpuart updates
- other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/itAw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykJbQCfWv/J4ZElO108iHBU5mJCDagUDBgAnAtLLN6A
SEAnnokGCDtA/BNIXeES
=luRi
-----END PGP SIGNATURE-----
Merge tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.3-rc1.
Once again, Jiri and Ilpo have done a number of core vt and tty/serial
layer cleanups that were much needed and appreciated. Other than that,
it's just a bunch of little tty/serial driver updates:
- qcom-geni-serial driver updates
- liteuart driver updates
- hvcs driver cleanups
- n_gsm updates and additions for new features
- more 8250 device support added
- fpga/dfl update and additions
- imx serial driver updates
- fsl_lpuart updates
- other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits)
tty: n_gsm: add keep alive support
serial: imx: remove a redundant check
dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties
soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
tty: n_gsm: add TIOCMIWAIT support
tty: n_gsm: add RING/CD control support
tty: n_gsm: mark unusable ioctl structure fields accordingly
serial: imx: get rid of registers shadowing
serial: imx: refine local variables in rxint()
serial: imx: stop using USR2 in FIFO reading loop
serial: imx: remove redundant USR2 read from FIFO reading loop
serial: imx: do not break from FIFO reading loop prematurely
serial: imx: do not sysrq broken chars
serial: imx: work-around for hardware RX flood
serial: imx: factor-out common code to imx_uart_soft_reset()
serial: 8250_pci1xxxx: Add power management functions to quad-uart driver
serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
serial: 8250_pci1xxxx: Add driver for quad-uart support
serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c
tty: pcn_uart: fix memory leak with using debugfs_lookup()
...
-----BEGIN PGP SIGNATURE-----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=cBvC
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2023022201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- HID-BPF infrastructure: this allows to start using HID-BPF. Note that
the mechanism to ship HID-BPF program through the kernel tree is
still not implemented yet (but is planned).
This should be a no-op for 99% of users. Also we are gaining
kselftests for the HID tree (Benjamin Tissoires)
- Some UAF fixes in workers when using uhid (Pietro Borrello & Benjamin
Tissoires)
- Constify hid_ll_driver (Thomas Weißschuh)
- Allow more custom IIO sensors through HID (Philipp Jungkamp)
- Logitech HID++ fixes for scroll wheel, protocol and debug (Bastien
Nocera)
- Some new device support: Steam Deck (Vicki Pfau), UClogic (José
Expósito), Logitech G923 Xbox Edition steering wheel (Walt Holman),
EVision keyboards (Philippe Valembois)
- other assorted code cleanups and fixes
* tag 'for-linus-2023022201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (99 commits)
HID: mcp-2221: prevent UAF in delayed work
hid: bigben_probe(): validate report count
HID: asus: use spinlock to safely schedule workers
HID: asus: use spinlock to protect concurrent accesses
HID: bigben: use spinlock to safely schedule workers
HID: bigben_worker() remove unneeded check on report_field
HID: bigben: use spinlock to protect concurrent accesses
HID: logitech-hidpp: Add myself to authors
HID: logitech-hidpp: Retry commands when device is busy
HID: logitech-hidpp: Add more debug statements
HID: Add support for Logitech G923 Xbox Edition steering wheel
HID: logitech-hidpp: Add Signature M650
HID: logitech-hidpp: Remove HIDPP_QUIRK_NO_HIDINPUT quirk
HID: logitech-hidpp: Don't restart communication if not necessary
HID: logitech-hidpp: Add constants for HID++ 2.0 error codes
Revert "HID: logitech-hidpp: add a module parameter to keep firmware gestures"
HID: logitech-hidpp: Hard-code HID++ 1.0 fast scroll support
HID: i2c-hid: goodix: Add mainboard-vddio-supply
dt-bindings: HID: i2c-hid: goodix: Add mainboard-vddio-supply
HID: i2c-hid: goodix: Stop tying the reset line to the regulator
...
Initial support of HID-BPF (Benjamin Tissoires)
The history is a little long for this series, as it was intended to be
sent for v6.2. However some last minute issues forced us to postpone it
to v6.3.
Conflicts:
* drivers/hid/i2c-hid/Kconfig:
commit bf7660dab3 ("HID: stop drivers from selecting CONFIG_HID")
conflicts with commit 2afac81dd1 ("HID: fix I2C_HID not selected
when I2C_HID_OF_ELAN is")
the resolution is simple enough: just drop the "default" and "select"
lines as the new commit from Arnd is doing
- constify hid_ll_driver (Thomas Weißschuh)
- map standard Battery System Charging to upower (José Expósito)
- couple of assorted fixes and new handling of HID usages (Jingyuan
Liang & Ronald Tschalär)
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
API:
- Use kmap_local instead of kmap_atomic.
- Change request callback to take void pointer.
- Print FIPS status in /proc/crypto (when enabled).
Algorithms:
- Add rfc4106/gcm support on arm64.
- Add ARIA AVX2/512 support on x86.
Drivers:
- Add TRNG driver for StarFive SoC.
- Delete ux500/hash driver (subsumed by stm32/hash).
- Add zlib support in qat.
- Add RSA support in aspeed.
-----BEGIN PGP SIGNATURE-----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=dMYe
-----END PGP SIGNATURE-----
Merge tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Use kmap_local instead of kmap_atomic
- Change request callback to take void pointer
- Print FIPS status in /proc/crypto (when enabled)
Algorithms:
- Add rfc4106/gcm support on arm64
- Add ARIA AVX2/512 support on x86
Drivers:
- Add TRNG driver for StarFive SoC
- Delete ux500/hash driver (subsumed by stm32/hash)
- Add zlib support in qat
- Add RSA support in aspeed"
* tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits)
crypto: x86/aria-avx - Do not use avx2 instructions
crypto: aspeed - Fix modular aspeed-acry
crypto: hisilicon/qm - fix coding style issues
crypto: hisilicon/qm - update comments to match function
crypto: hisilicon/qm - change function names
crypto: hisilicon/qm - use min() instead of min_t()
crypto: hisilicon/qm - remove some unused defines
crypto: proc - Print fips status
crypto: crypto4xx - Call dma_unmap_page when done
crypto: octeontx2 - Fix objects shared between several modules
crypto: nx - Fix sparse warnings
crypto: ecc - Silence sparse warning
tls: Pass rec instead of aead_req into tls_encrypt_done
crypto: api - Remove completion function scaffolding
tls: Remove completion function scaffolding
tipc: Remove completion function scaffolding
net: ipv6: Remove completion function scaffolding
net: ipv4: Remove completion function scaffolding
net: macsec: Remove completion function scaffolding
dm: Remove completion function scaffolding
...
When sending LE create conn command, we set a timer with a duration of
HCI_LE_CONN_TIMEOUT before timing out and calling
create_le_conn_complete. Additionally, when receiving the command
complete, we also set a timer with the same duration to call
le_conn_timeout.
Usually the latter will be triggered first, which then sends a LE
create conn cancel command. However, due to the nature of racing, it
is possible for the former to be called first, thereby calling the
chain hci_conn_failed -> hci_conn_del -> cancel_delayed_work, thereby
preventing LE create conn cancel to be sent. In this situation, the
controller will be stuck in trying the LE connection.
This patch flushes le_conn_timeout on create_le_conn_complete to make
sure we always send LE create connection cancel, if necessary.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is possible to initiate a SCO connection while deleting the
corresponding ACL connection, e.g. in below scenario:
(1) < hci setup sync connect command
(2) > hci disconn complete event (for the acl connection)
(3) > hci command complete event (for(1), failure)
When it happens, hci_cs_setup_sync_conn won't be able to obtain the
reference to the SCO connection, so it will be stuck and potentially
hinder subsequent connections to the same device.
This patch prevents that by also deleting the SCO connection if it is
still not established when the corresponding ACL connection is deleted.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes all instances of which requires to allocate a buffer calling
alloc_skb which may release the chan lock and reacquire later which
makes it possible that the chan is disconnected in the meantime.
Fixes: a6a5568c03 ("Bluetooth: Lock the L2CAP channel when sending")
Reported-by: Alexander Coffin <alex.coffin@matician.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Userspace needs to know whether the adapter has feature support for
Connected Isochronous Stream - Central/Peripheral, so it can set up
LE Audio features accordingly.
Expose these feature bits as settings in MGMT controller info.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The compiler thinks "conn" might be NULL after a call to hci_bind_bis(),
which cannot happen. Avoid any confusion by just making it not return a
value since it cannot fail. Fixes the warnings seen with GCC 13:
In function 'arch_atomic_dec_and_test',
inlined from 'atomic_dec_and_test' at ../include/linux/atomic/atomic-instrumented.h:576:9,
inlined from 'hci_conn_drop' at ../include/net/bluetooth/hci_core.h:1391:6,
inlined from 'hci_connect_bis' at ../net/bluetooth/hci_conn.c:2124:3:
../arch/x86/include/asm/rmwcc.h:37:9: warning: array subscript 0 is outside array bounds of 'atomic_t[0]' [-Warray-bounds=]
37 | asm volatile (fullop CC_SET(cc) \
| ^~~
...
In function 'hci_connect_bis':
cc1: note: source object is likely at address zero
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-bluetooth@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
As suggested by Cong, introduce a tracepoint for all ->sk_data_ready()
callback implementations. For example:
<...>
iperf-609 [002] ..... 70.660425: sk_data_ready: family=2 protocol=6 func=sock_def_readable
iperf-609 [002] ..... 70.660436: sk_data_ready: family=2 protocol=6 func=sock_def_readable
<...>
Suggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Return boolean from ->carrier_raised() instead of 0 and 1. Make the
return type change also to tty_port_carrier_raised() that makes the
->carrier_raised() call (+ cd variable in moxa into which its return
value is stored).
Also cleans up a few unnecessary constructs related to this change:
return xx ? 1 : 0;
-> return xx;
if (xx)
return 1;
return 0;
-> return xx;
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230117090358.4796-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot reports a possible deadlock in rfcomm_sk_state_change [1].
While rfcomm_sock_connect acquires the sk lock and waits for
the rfcomm lock, rfcomm_sock_release could have the rfcomm
lock and hit a deadlock for acquiring the sk lock.
Here's a simplified flow:
rfcomm_sock_connect:
lock_sock(sk)
rfcomm_dlc_open:
rfcomm_lock()
rfcomm_sock_release:
rfcomm_sock_shutdown:
rfcomm_lock()
__rfcomm_dlc_close:
rfcomm_k_state_change:
lock_sock(sk)
This patch drops the sk lock before calling rfcomm_dlc_open to
avoid the possible deadlock and holds sk's reference count to
prevent use-after-free after rfcomm_dlc_open completes.
Reported-by: syzbot+d7ce59...@syzkaller.appspotmail.com
Fixes: 1804fdf6e4 ("Bluetooth: btintel: Combine setting up MSFT extension")
Link: https://syzkaller.appspot.com/bug?extid=d7ce59b06b3eb14fd218 [1]
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the following trace caused by attempting to lock
cmd_sync_work_lock while holding the rcu_read_lock:
kworker/u3:2/212 is trying to lock:
ffff888002600910 (&hdev->cmd_sync_work_lock){+.+.}-{3:3}, at:
hci_cmd_sync_queue+0xad/0x140
other info that might help us debug this:
context-{4:4}
4 locks held by kworker/u3:2/212:
#0: ffff8880028c6530 ((wq_completion)hci0#2){+.+.}-{0:0}, at:
process_one_work+0x4dc/0x9a0
#1: ffff888001aafde0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0},
at: process_one_work+0x4dc/0x9a0
#2: ffff888002600070 (&hdev->lock){+.+.}-{3:3}, at:
hci_cc_le_set_cig_params+0x64/0x4f0
#3: ffffffffa5994b00 (rcu_read_lock){....}-{1:2}, at:
hci_cc_le_set_cig_params+0x2f9/0x4f0
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When hci_cmd_sync_queue() failed in hci_update_adv_data(), inst_ptr is
not freed, which will cause memory leak, convert to use ERR_PTR/PTR_ERR
to pass the instance to callback so no memory needs to be allocated.
Fixes: 651cd3d65b ("Bluetooth: convert hci_update_adv_data to hci_sync")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When hci_cmd_sync_queue() failed in hci_le_terminate_big() or
hci_le_big_terminate(), the memory pointed by variable d is not freed,
which will cause memory leak. Add release process to error path.
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Don't try to use HCI_OP_LE_READ_BUFFER_SIZE_V2 if controller don't
support ISO channels, but in order to check if ISO channels are
supported HCI_OP_LE_READ_LOCAL_FEATURES needs to be done earlier so the
features bits can be checked on hci_le_read_buffer_size_sync.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216817
Fixes: c1631dbc00 ("Bluetooth: hci_sync: Fix hci_read_buffer_size_sync")
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Smatch Warning:
net/bluetooth/mgmt_util.c:375 mgmt_mesh_add() error: __memcpy()
'mesh_tx->param' too small (48 vs 50)
Analysis:
'mesh_tx->param' is array of size 48. This is the destination.
u8 param[sizeof(struct mgmt_cp_mesh_send) + 29]; // 19 + 29 = 48.
But in the caller 'mesh_send' we reject only when len > 50.
len > (MGMT_MESH_SEND_SIZE + 31) // 19 + 31 = 50.
Fixes: b338d91703 ("Bluetooth: Implement support for Mesh")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Nothing is nor should be modifying these structs so mark them as const.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
As there are no external users this implementation detail does not need
to be exported.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Core
----
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations.
- Add inet drop monitor support.
- A few GRO performance improvements.
- Add infrastructure for atomic dev stats, addressing long standing
data races.
- De-duplicate common code between OVS and conntrack offloading
infrastructure.
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements.
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up
the workload with the number of available CPUs.
- Add the helper support for connection-tracking OVS offload.
BPF
---
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF.
- Make cgroup local storage available to non-cgroup attached BPF
programs.
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers.
- A relevant bunch of BPF verifier fixes and improvements.
- Veristat tool improvements to support custom filtering, sorting,
and replay of results.
- Add LLVM disassembler as default library for dumping JITed code.
- Lots of new BPF documentation for various BPF maps.
- Add bpf_rcu_read_{,un}lock() support for sleepable programs.
- Add RCU grace period chaining to BPF to wait for the completion
of access from both sleepable and non-sleepable BPF programs.
- Add support storing struct task_struct objects as kptrs in maps.
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values.
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions.
Protocols
---------
- TCP: implement Protective Load Balancing across switch links.
- TCP: allow dynamically disabling TCP-MD5 static key, reverting
back to fast[er]-path.
- UDP: Introduce optional per-netns hash lookup table.
- IPv6: simplify and cleanup sockets disposal.
- Netlink: support different type policies for each generic
netlink operation.
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support.
- MPTCP: add netlink notification support for listener sockets
events.
- SCTP: add VRF support, allowing sctp sockets binding to VRF
devices.
- Add bridging MAC Authentication Bypass (MAB) support.
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios.
- More work for Wi-Fi 7 support, comprising conversion of all
the existing drivers to internal TX queue usage.
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading.
- IPSec: extended ack support for more descriptive XFRM error
reporting.
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking.
- IEEE 802154: synchronous send frame and extended filtering
support, initial support for scanning available 15.4 networks.
- Tun: bump the link speed from 10Mbps to 10Gbps.
- Tun/VirtioNet: implement UDP segmentation offload support.
Driver API
----------
- PHY/SFP: improve power level switching between standard
level 1 and the higher power levels.
- New API for netdev <-> devlink_port linkage.
- PTP: convert existing drivers to new frequency adjustment
implementation.
- DSA: add support for rx offloading.
- Autoload DSA tagging driver when dynamically changing protocol.
- Add new PCP and APPTRUST attributes to Data Center Bridging.
- Add configuration support for 800Gbps link speed.
- Add devlink port function attribute to enable/disable RoCE and
migratable.
- Extend devlink-rate to support strict prioriry and weighted fair
queuing.
- Add devlink support to directly reading from region memory.
- New device tree helper to fetch MAC address from nvmem.
- New big TCP helper to simplify temporary header stripping.
New hardware / drivers
----------------------
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches.
- Marvel Prestera AC5X Ethernet Switch.
- WangXun 10 Gigabit NIC.
- Motorcomm yt8521 Gigabit Ethernet.
- Microchip ksz9563 Gigabit Ethernet Switch.
- Microsoft Azure Network Adapter.
- Linux Automation 10Base-T1L adapter.
- PHY:
- Aquantia AQR112 and AQR412.
- Motorcomm YT8531S.
- PTP:
- Orolia ART-CARD.
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices.
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices.
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets.
- Realtek RTL8852BE and RTL8723DS.
- Cypress.CYW4373A0 WiFi + Bluetooth combo device.
Drivers
-------
- CAN:
- gs_usb: bus error reporting support.
- kvaser_usb: listen only and bus error reporting support.
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping.
- implement devlink-rate support.
- support direct read from memory.
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate.
- Support for enhanced events compression.
- extend H/W offload packet manipulation capabilities.
- implement IPSec packet offload mode.
- nVidia/Mellanox (mlx4):
- better big TCP support.
- Netronome Ethernet NICs (nfp):
- IPsec offload support.
- add support for multicast filter.
- Broadcom:
- RSS and PTP support improvements.
- AMD/SolarFlare:
- netlink extened ack improvements.
- add basic flower matches to offload, and related stats.
- Virtual NICs:
- ibmvnic: introduce affinity hint support.
- small / embedded:
- FreeScale fec: add initial XDP support.
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood.
- TI am65-cpsw: add suspend/resume support.
- Mediatek MT7986: add RX wireless wthernet dispatch support.
- Realtek 8169: enable GRO software interrupt coalescing per
default.
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP.
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support.
- add ip6gre support.
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support.
- enable flow offload support.
- Renesas:
- add rswitch R-Car Gen4 gPTP support.
- Microchip (lan966x):
- add full XDP support.
- add TC H/W offload via VCAP.
- enable PTP on bridge interfaces.
- Microchip (ksz8):
- add MTU support for KSZ8 series.
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan.
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support.
- add ack signal support.
- enable coredump support.
- remain_on_channel support.
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities.
- 320 MHz channels support.
- RealTek WiFi (rtw89):
- new dynamic header firmware format support.
- wake-over-WLAN support.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=CbJC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations
- Add inet drop monitor support
- A few GRO performance improvements
- Add infrastructure for atomic dev stats, addressing long standing
data races
- De-duplicate common code between OVS and conntrack offloading
infrastructure
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up the
workload with the number of available CPUs
- Add the helper support for connection-tracking OVS offload
BPF:
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF
- Make cgroup local storage available to non-cgroup attached BPF
programs
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers
- A relevant bunch of BPF verifier fixes and improvements
- Veristat tool improvements to support custom filtering, sorting,
and replay of results
- Add LLVM disassembler as default library for dumping JITed code
- Lots of new BPF documentation for various BPF maps
- Add bpf_rcu_read_{,un}lock() support for sleepable programs
- Add RCU grace period chaining to BPF to wait for the completion of
access from both sleepable and non-sleepable BPF programs
- Add support storing struct task_struct objects as kptrs in maps
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions
Protocols:
- TCP: implement Protective Load Balancing across switch links
- TCP: allow dynamically disabling TCP-MD5 static key, reverting back
to fast[er]-path
- UDP: Introduce optional per-netns hash lookup table
- IPv6: simplify and cleanup sockets disposal
- Netlink: support different type policies for each generic netlink
operation
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support
- MPTCP: add netlink notification support for listener sockets events
- SCTP: add VRF support, allowing sctp sockets binding to VRF devices
- Add bridging MAC Authentication Bypass (MAB) support
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios
- More work for Wi-Fi 7 support, comprising conversion of all the
existing drivers to internal TX queue usage
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading
- IPSec: extended ack support for more descriptive XFRM error
reporting
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking
- IEEE 802154: synchronous send frame and extended filtering support,
initial support for scanning available 15.4 networks
- Tun: bump the link speed from 10Mbps to 10Gbps
- Tun/VirtioNet: implement UDP segmentation offload support
Driver API:
- PHY/SFP: improve power level switching between standard level 1 and
the higher power levels
- New API for netdev <-> devlink_port linkage
- PTP: convert existing drivers to new frequency adjustment
implementation
- DSA: add support for rx offloading
- Autoload DSA tagging driver when dynamically changing protocol
- Add new PCP and APPTRUST attributes to Data Center Bridging
- Add configuration support for 800Gbps link speed
- Add devlink port function attribute to enable/disable RoCE and
migratable
- Extend devlink-rate to support strict prioriry and weighted fair
queuing
- Add devlink support to directly reading from region memory
- New device tree helper to fetch MAC address from nvmem
- New big TCP helper to simplify temporary header stripping
New hardware / drivers:
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches
- Marvel Prestera AC5X Ethernet Switch
- WangXun 10 Gigabit NIC
- Motorcomm yt8521 Gigabit Ethernet
- Microchip ksz9563 Gigabit Ethernet Switch
- Microsoft Azure Network Adapter
- Linux Automation 10Base-T1L adapter
- PHY:
- Aquantia AQR112 and AQR412
- Motorcomm YT8531S
- PTP:
- Orolia ART-CARD
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets
- Realtek RTL8852BE and RTL8723DS
- Cypress.CYW4373A0 WiFi + Bluetooth combo device
Drivers:
- CAN:
- gs_usb: bus error reporting support
- kvaser_usb: listen only and bus error reporting support
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping
- implement devlink-rate support
- support direct read from memory
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate
- Support for enhanced events compression
- extend H/W offload packet manipulation capabilities
- implement IPSec packet offload mode
- nVidia/Mellanox (mlx4):
- better big TCP support
- Netronome Ethernet NICs (nfp):
- IPsec offload support
- add support for multicast filter
- Broadcom:
- RSS and PTP support improvements
- AMD/SolarFlare:
- netlink extened ack improvements
- add basic flower matches to offload, and related stats
- Virtual NICs:
- ibmvnic: introduce affinity hint support
- small / embedded:
- FreeScale fec: add initial XDP support
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
- TI am65-cpsw: add suspend/resume support
- Mediatek MT7986: add RX wireless wthernet dispatch support
- Realtek 8169: enable GRO software interrupt coalescing per
default
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support
- add ip6gre support
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support
- enable flow offload support
- Renesas:
- add rswitch R-Car Gen4 gPTP support
- Microchip (lan966x):
- add full XDP support
- add TC H/W offload via VCAP
- enable PTP on bridge interfaces
- Microchip (ksz8):
- add MTU support for KSZ8 series
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support
- add ack signal support
- enable coredump support
- remain_on_channel support
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
- 320 MHz channels support
- RealTek WiFi (rtw89):
- new dynamic header firmware format support
- wake-over-WLAN support"
* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
ipvs: fix type warning in do_div() on 32 bit
net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
net: ipa: add IPA v4.7 support
dt-bindings: net: qcom,ipa: Add SM6350 compatible
bnxt: Use generic HBH removal helper in tx path
IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
selftests: forwarding: Add bridge MDB test
selftests: forwarding: Rename bridge_mdb test
bridge: mcast: Support replacement of MDB port group entries
bridge: mcast: Allow user space to specify MDB entry routing protocol
bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
bridge: mcast: Add support for (*, G) with a source list and filter mode
bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
bridge: mcast: Add a flag for user installed source entries
bridge: mcast: Expose __br_multicast_del_group_src()
bridge: mcast: Expose br_multicast_new_group_src()
bridge: mcast: Add a centralized error path
bridge: mcast: Place netlink policy before validation functions
bridge: mcast: Split (*, G) and (S, G) addition into different functions
bridge: mcast: Do not derive entry type from its filter mode
...
direction misannotations and (hopefully) preventing
more of the same for the future.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY5ZzQAAKCRBZ7Krx/gZQ
65RZAP4nTkvOn0NZLVFkuGOx8pgJelXAvrteyAuecVL8V6CR4AD40qCVY51PJp8N
MzwiRTeqnGDxTTF7mgd//IB6hoatAA==
=bcvF
-----END PGP SIGNATURE-----
Merge tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter work; most of that is about getting rid of direction
misannotations and (hopefully) preventing more of the same for the
future"
* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use less confusing names for iov_iter direction initializers
iov_iter: saner checks for attempt to copy to/from iterator
[xen] fix "direction" argument of iov_iter_kvec()
[vhost] fix 'direction' argument of iov_iter_{init,bvec}()
[target] fix iov_iter_bvec() "direction" argument
[s390] memcpy_real(): WRITE is "data source", not destination...
[s390] zcore: WRITE is "data source", not destination...
[infiniband] READ is "data destination", not source...
[fsi] WRITE is "data source", not destination...
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
csum_and_copy_to_iter(): handle ITER_DISCARD
get rid of unlikely() on page_copy_sane() calls
-----BEGIN PGP SIGNATURE-----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=QRhK
-----END PGP SIGNATURE-----
Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
This make sure HCI_OP_WRITE_AUTH_PAYLOAD_TO completes before notifying
the encryption change just as is done with HCI_OP_READ_ENC_KEY_SIZE.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes: 81be03e026 ("Bluetooth: RFCOMM: Replace use of memcpy_from_msg with bt_skb_sendmmsg")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes: 9238f36a5a ("Bluetooth: Add request cmd_complete and cmd_status functions")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When attempting to connect multiple ISO sockets without using
DEFER_SETUP may result in the following crash:
BUG: KASAN: null-ptr-deref in hci_create_cis_sync+0x18b/0x2b0
Read of size 2 at addr 0000000000000036 by task kworker/u3:1/50
CPU: 0 PID: 50 Comm: kworker/u3:1 Not tainted
6.0.0-rc7-02243-gb84a13ff4eda #4373
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
BIOS 1.16.0-1.fc36 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x19/0x27
kasan_report+0xbc/0xf0
? hci_create_cis_sync+0x18b/0x2b0
hci_create_cis_sync+0x18b/0x2b0
? get_link_mode+0xd0/0xd0
? __ww_mutex_lock_slowpath+0x10/0x10
? mutex_lock+0xe0/0xe0
? get_link_mode+0xd0/0xd0
hci_cmd_sync_work+0x111/0x190
process_one_work+0x427/0x650
worker_thread+0x87/0x750
? process_one_work+0x650/0x650
kthread+0x14e/0x180
? kthread_exit+0x50/0x50
ret_from_fork+0x22/0x30
</TASK>
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Broadcom controllers present on Apple Silicon devices use the upper
8 bits of the event type in the LE Extended Advertising Report for
the channel on which the frame has been received.
These bits are reserved according to the Bluetooth spec anyway such that
we can just drop them to ensure that the advertising results are parsed
correctly.
The following excerpt from a btmon trace shows a report received on
channel 37 by these controllers:
> HCI Event: LE Meta Event (0x3e) plen 55
LE Extended Advertising Report (0x0d)
Num reports: 1
Entry 0
Event type: 0x2513
Props: 0x0013
Connectable
Scannable
Use legacy advertising PDUs
Data status: Complete
Reserved (0x2500)
Legacy PDU Type: Reserved (0x2513)
Address type: Public (0x00)
Address: XX:XX:XX:XX:XX:XX (Shenzhen Jingxun Software [...])
Primary PHY: LE 1M
Secondary PHY: No packets
SID: no ADI field (0xff)
TX power: 127 dBm
RSSI: -76 dBm (0xb4)
Periodic advertising interval: 0.00 msec (0x0000)
Direct address type: Public (0x00)
Direct address: 00:00:00:00:00:00 (OUI 00-00-00)
Data length: 0x1d
[...]
Flags: 0x18
Simultaneous LE and BR/EDR (Controller)
Simultaneous LE and BR/EDR (Host)
Company: Harman International Industries, Inc. (87)
Data: [...]
Service Data (UUID 0xfddf):
Name (complete): JBL Flip 5
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Replace kmalloc+memset by kzalloc
for better readability and simplicity.
This addresses the cocci warning below:
WARNING: kzalloc should be used for d, instead of kmalloc/memset
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
'err' is known to be <0 at this point.
So, some cases can not be reached because of a missing "-".
Add it.
Fixes: ca2045e059 ("Bluetooth: Add bt_status")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds CONFIG_BT_LE_L2CAP_ECRED which can be used to enable L2CAP
Enhanced Credit Flow Control Mode by default, previously it was only
possible to set it via module parameter (e.g. bluetooth.enable_ecred=1).
Since L2CAP ECRED mode is required by the likes of EATT which is
recommended for LE Audio this enables it by default.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-By: Tedd Ho-Jeong An <tedd.an@intel.com>
When validating the parameter length for MGMT_OP_ADD_EXT_ADV_PARAMS
command, use the correct op code in error status report:
was MGMT_OP_ADD_ADVERTISING, changed to MGMT_OP_ADD_EXT_ADV_PARAMS.
Fixes: 1241057283 ("Bluetooth: Break add adv into two mgmt commands")
Signed-off-by: Inga Stotland <inga.stotland@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If hci_register_suspend_notifier() returns error, the hdev and rfkill
are leaked. We could disregard the error and print a warning message
instead to avoid leaks, as it just means we won't be handing suspend
requests.
Fixes: 9952d90ea2 ("Bluetooth: Handle PM_SUSPEND_PREPARE and PM_POST_SUSPEND")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use kzalloc rather than duplicating its implementation, which makes code
simple and easy to understand.
./net/bluetooth/hci_conn.c:2038:6-13: WARNING: kzalloc should be used for cp, instead of kmalloc/memset.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2406
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For ISO BIS related functions in hci_conn.c, make dst_type values be HCI
address type values, not ISO socket address type values. This makes it
consistent with CIS functions.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If a command is already sent, we take care of freeing it, but we
also need to cancel the timeout as well.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
force_static_address shall be writable while hdev is initing but is not
considered powered yet since the static address is written only when
powered.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Brian Gix <brian.gix@intel.com>
This attempts to program the address stored in hdev->static_addr after
the init sequence has been complete:
@ MGMT Command: Set Static A.. (0x002b) plen 6
Address: C0:55:44:33:22:11 (Static)
@ MGMT Event: Command Complete (0x0001) plen 7
Set Static Address (0x002b) plen 4
Status: Success (0x00)
Current settings: 0x00008200
Low Energy
Static Address
@ MGMT Event: New Settings (0x0006) plen 4
Current settings: 0x00008200
Low Energy
Static Address
< HCI Command: LE Set Random.. (0x08|0x0005) plen 6
Address: C0:55:44:33:22:11 (Static)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Random Address (0x08|0x0005) ncmd 1
Status: Success (0x00)
@ MGMT Event: Command Complete (0x0001) plen 7
Set Powered (0x0005) plen 4
Status: Success (0x00)
Current settings: 0x00008201
Powered
Low Energy
Static Address
@ MGMT Event: New Settings (0x0006) plen 4
Current settings: 0x00008201
Powered
Low Energy
Static Address
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Brian Gix <brian.gix@intel.com>
bt_init() calls bt_leds_init() to register led, but if it fails later,
bt_leds_cleanup() is not called to unregister it.
This can cause panic if the argument "bluetooth-power" in text is freed
and then another led_trigger_register() tries to access it:
BUG: unable to handle page fault for address: ffffffffc06d3bc0
RIP: 0010:strcmp+0xc/0x30
Call Trace:
<TASK>
led_trigger_register+0x10d/0x4f0
led_trigger_register_simple+0x7d/0x100
bt_init+0x39/0xf7 [bluetooth]
do_one_initcall+0xd0/0x4e0
Fixes: e64c97b53b ("Bluetooth: Add combined LED trigger for controller power")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Handling of Read Local Supported Codecs was broken during the
HCI serialization design change patches.
Fixes: d0b137062b ("Bluetooth: hci_sync: Rework init stages")
Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
On kernel 6.1-rcX, I have been getting the following dmesg error message
on every boot, resume from suspend and rfkill unblock of the Bluetooth
device:
Bluetooth: hci0: HCI_REQ-0xfcf0
After some investigation, it turned out to be caused by
commit dd50a864ff ("Bluetooth: Delete unreferenced hci_request code")
which modified hci_req_add() in net/bluetooth/hci_request.c to always
print an error message when it is executed. In my case, the function was
executed by msft_set_filter_enable() in net/bluetooth/msft.c, which
provides support for Microsoft vendor opcodes.
As explained by Brian Gix, "the error gets logged because it is using a
deprecated (but still working) mechanism to issue HCI opcodes" [1]. So
this is just a debugging tool to show that a deprecated function is
executed. As such, it should not be included in the mainline kernel.
See for example
commit 771c035372 ("deprecate the '__deprecated' attribute warnings entirely and for good")
Additionally, this error message is cryptic and the user is not able to
do anything about it.
[1]
Link: https://lore.kernel.org/lkml/beb8dcdc3aee4c5c833aa382f35995f17e7961a1.camel@intel.com/
Fixes: dd50a864ff ("Bluetooth: Delete unreferenced hci_request code")
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: Brian Gix <brian.gix@intel.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_get_route() takes reference, we should use hci_dev_put() to release
it when not need anymore.
Fixes: f764a6c2c1 ("Bluetooth: ISO: Add broadcast support")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_get_route() takes reference, we should use hci_dev_put() to release
it when not need anymore.
Fixes: 6b8d4a6a03 ("Bluetooth: 6LoWPAN: Use connected oriented channel instead of fixed one")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
A patch series by a Qualcomm engineer essentially removed my
quirk/workaround because they thought it was unnecessary.
It wasn't, and it broke everything again:
https://patchwork.kernel.org/project/netdevbpf/list/?series=661703&archive=both&state=*
He argues that the quirk is not necessary because the code should check
if the dongle says if it's supported or not. The problem is that for
these Chinese CSR clones they say that it would work:
= New Index: 00:00:00:00:00:00 (Primary,USB,hci0)
= Open Index: 00:00:00:00:00:00
< HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> HCI Event: Command Complete (0x0e) plen 12
> [hci0] 11.276039
Read Local Version Information (0x04|0x0001) ncmd 1
Status: Success (0x00)
HCI version: Bluetooth 5.0 (0x09) - Revision 2064 (0x0810)
LMP version: Bluetooth 5.0 (0x09) - Subversion 8978 (0x2312)
Manufacturer: Cambridge Silicon Radio (10)
...
< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0
> HCI Event: Command Complete (0x0e) plen 68
> [hci0] 11.668030
Read Local Supported Commands (0x04|0x0002) ncmd 1
Status: Success (0x00)
Commands: 163 entries
...
Read Default Erroneous Data Reporting (Octet 18 - Bit 2)
Write Default Erroneous Data Reporting (Octet 18 - Bit 3)
...
...
< HCI Command: Read Default Erroneous Data Reporting (0x03|0x005a) plen 0
= Close Index: 00:1A:7D:DA:71:XX
So bring it back wholesale.
Fixes: 63b1a7dd38 ("Bluetooth: hci_sync: Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING")
Fixes: e168f69008 ("Bluetooth: btusb: Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for fake CSR")
Fixes: 766ae2422b ("Bluetooth: hci_sync: Check LMP feature bit instead of quirk")
Cc: stable@vger.kernel.org
Cc: Zijun Hu <quic_zijuhu@quicinc.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Tested-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If HID_SUPPORT is not selected, BT_HIDP should not be available, simply
because we disallowed the HID bus entirely.
Add a new depends and actually revert this file back to where it was 10
years ago before it was changed by commit 1f41a6a994 ("HID: Fix the
generic Kconfig options").
Fixes: 25621bcc89 ("HID: Kconfig: split HID support and hid-core compilation")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202211181514.fLhaiS7o-lkp@intel.com/
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
These cases were done with this Coccinelle:
@@
expression H;
expression L;
@@
- (get_random_u32_below(H) + L)
+ get_random_u32_inclusive(L, H + L - 1)
@@
expression H;
expression L;
expression E;
@@
get_random_u32_inclusive(L,
H
- + E
- - E
)
@@
expression H;
expression L;
expression E;
@@
get_random_u32_inclusive(L,
H
- - E
- + E
)
@@
expression H;
expression L;
expression E;
expression F;
@@
get_random_u32_inclusive(L,
H
- - E
+ F
- + E
)
@@
expression H;
expression L;
expression E;
expression F;
@@
get_random_u32_inclusive(L,
H
- + E
+ F
- - E
)
And then subsequently cleaned up by hand, with several automatic cases
rejected if it didn't make sense contextually.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This is a simple mechanical transformation done by:
@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
(E)
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Reviewed-by: SeongJae Park <sj@kernel.org> # for damon
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
On l2cap_parse_conf_req the variable efs is only initialized if
remote_efs has been set.
CVE: CVE-2022-42895
CC: stable@vger.kernel.org
Reported-by: Tamás Koczka <poprdi@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
l2cap_global_chan_by_psm shall not return fixed channels as they are not
meant to be connected by (S)PSM.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
The Bluetooth spec states that the valid range for SPSM is from
0x0001-0x00ff so it is invalid to accept values outside of this range:
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 3, Part A
page 1059:
Table 4.15: L2CAP_LE_CREDIT_BASED_CONNECTION_REQ SPSM ranges
CVE: CVE-2022-42896
CC: stable@vger.kernel.org
Reported-by: Tamás Koczka <poprdi@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
When disconnecting an ISO link the controller may not generate
HCI_EV_NUM_COMP_PKTS for unacked packets which needs to be restored in
hci_conn_del otherwise the host would assume they are still in use and
would not be able to use all the buffers available.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Frédéric Danis <frederic.danis@collabora.com>
Syzkaller reports a memory leak as follows:
====================================
BUG: memory leak
unreferenced object 0xffff88810d81ac00 (size 240):
[...]
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff838733d9>] __alloc_skb+0x1f9/0x270 net/core/skbuff.c:418
[<ffffffff833f742f>] alloc_skb include/linux/skbuff.h:1257 [inline]
[<ffffffff833f742f>] bt_skb_alloc include/net/bluetooth/bluetooth.h:469 [inline]
[<ffffffff833f742f>] vhci_get_user drivers/bluetooth/hci_vhci.c:391 [inline]
[<ffffffff833f742f>] vhci_write+0x5f/0x230 drivers/bluetooth/hci_vhci.c:511
[<ffffffff815e398d>] call_write_iter include/linux/fs.h:2192 [inline]
[<ffffffff815e398d>] new_sync_write fs/read_write.c:491 [inline]
[<ffffffff815e398d>] vfs_write+0x42d/0x540 fs/read_write.c:578
[<ffffffff815e3cdd>] ksys_write+0x9d/0x160 fs/read_write.c:631
[<ffffffff845e0645>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff845e0645>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
[<ffffffff84600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
====================================
HCI core will uses hci_rx_work() to process frame, which is queued to
the hdev->rx_q tail in hci_recv_frame() by HCI driver.
Yet the problem is that, HCI core may not free the skb after handling
ACL data packets. To be more specific, when start fragment does not
contain the L2CAP length, HCI core just copies skb into conn->rx_skb and
finishes frame process in l2cap_recv_acldata(), without freeing the skb,
which triggers the above memory leak.
This patch solves it by releasing the relative skb, after processing
the above case in l2cap_recv_acldata().
Fixes: 4d7ea8ee90 ("Bluetooth: L2CAP: Fix handling fragmented length")
Link: https://lore.kernel.org/all/0000000000000d0b1905e6aaef64@google.com/
Reported-and-tested-by: syzbot+8f819e36e01022991cfa@syzkaller.appspotmail.com
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When l2cap_recv_frame() is invoked to receive data, and the cid is
L2CAP_CID_A2MP, if the channel does not exist, it will create a channel.
However, after a channel is created, the hold operation of the channel
is not performed. In this case, the value of channel reference counting
is 1. As a result, after hci_error_reset() is triggered, l2cap_conn_del()
invokes the close hook function of A2MP to release the channel. Then
l2cap_chan_unlock(chan) will trigger UAF issue.
The process is as follows:
Receive data:
l2cap_data_channel()
a2mp_channel_create() --->channel ref is 2
l2cap_chan_put() --->channel ref is 1
Triger event:
hci_error_reset()
hci_dev_do_close()
...
l2cap_disconn_cfm()
l2cap_conn_del()
l2cap_chan_hold() --->channel ref is 2
l2cap_chan_del() --->channel ref is 1
a2mp_chan_close_cb() --->channel ref is 0, release channel
l2cap_chan_unlock() --->UAF of channel
The detailed Call Trace is as follows:
BUG: KASAN: use-after-free in __mutex_unlock_slowpath+0xa6/0x5e0
Read of size 8 at addr ffff8880160664b8 by task kworker/u11:1/7593
Workqueue: hci0 hci_error_reset
Call Trace:
<TASK>
dump_stack_lvl+0xcd/0x134
print_report.cold+0x2ba/0x719
kasan_report+0xb1/0x1e0
kasan_check_range+0x140/0x190
__mutex_unlock_slowpath+0xa6/0x5e0
l2cap_conn_del+0x404/0x7b0
l2cap_disconn_cfm+0x8c/0xc0
hci_conn_hash_flush+0x11f/0x260
hci_dev_close_sync+0x5f5/0x11f0
hci_dev_do_close+0x2d/0x70
hci_error_reset+0x9e/0x140
process_one_work+0x98a/0x1620
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>
Allocated by task 7593:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0xa9/0xd0
l2cap_chan_create+0x40/0x930
amp_mgr_create+0x96/0x990
a2mp_channel_create+0x7d/0x150
l2cap_recv_frame+0x51b8/0x9a70
l2cap_recv_acldata+0xaa3/0xc00
hci_rx_work+0x702/0x1220
process_one_work+0x98a/0x1620
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
Freed by task 7593:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_set_free_info+0x20/0x30
____kasan_slab_free+0x167/0x1c0
slab_free_freelist_hook+0x89/0x1c0
kfree+0xe2/0x580
l2cap_chan_put+0x22a/0x2d0
l2cap_conn_del+0x3fc/0x7b0
l2cap_disconn_cfm+0x8c/0xc0
hci_conn_hash_flush+0x11f/0x260
hci_dev_close_sync+0x5f5/0x11f0
hci_dev_do_close+0x2d/0x70
hci_error_reset+0x9e/0x140
process_one_work+0x98a/0x1620
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
Last potentially related work creation:
kasan_save_stack+0x1e/0x40
__kasan_record_aux_stack+0xbe/0xd0
call_rcu+0x99/0x740
netlink_release+0xe6a/0x1cf0
__sock_release+0xcd/0x280
sock_close+0x18/0x20
__fput+0x27c/0xa90
task_work_run+0xdd/0x1a0
exit_to_user_mode_prepare+0x23c/0x250
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x42/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Second to last potentially related work creation:
kasan_save_stack+0x1e/0x40
__kasan_record_aux_stack+0xbe/0xd0
call_rcu+0x99/0x740
netlink_release+0xe6a/0x1cf0
__sock_release+0xcd/0x280
sock_close+0x18/0x20
__fput+0x27c/0xa90
task_work_run+0xdd/0x1a0
exit_to_user_mode_prepare+0x23c/0x250
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x42/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: d0be8347c6 ("Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_connect_cis and iso_connect_cis call hci_bind_cis inconsistently
with dst_type being either ISO socket address type or the HCI type, but
these values cannot be mixed like this. Fix this by using only the HCI
type.
CIS connection dst_type was also not initialized in hci_bind_cis, even
though it is used in hci_conn_hash_lookup_cis to find existing
connections. Set the value in hci_bind_cis, so that existing CIS
connections are found e.g. when doing deferred socket connections, also
when dst_type is not 0 (ADDR_LE_DEV_PUBLIC).
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix the race condition between the following two flows that run in
parallel:
1. l2cap_reassemble_sdu -> chan->ops->recv (l2cap_sock_recv_cb) ->
__sock_queue_rcv_skb.
2. bt_sock_recvmsg -> skb_recv_datagram, skb_free_datagram.
An SKB can be queued by the first flow and immediately dequeued and
freed by the second flow, therefore the callers of l2cap_reassemble_sdu
can't use the SKB after that function returns. However, some places
continue accessing struct l2cap_ctrl that resides in the SKB's CB for a
short time after l2cap_reassemble_sdu returns, leading to a
use-after-free condition (the stack trace is below, line numbers for
kernel 5.19.8).
Fix it by keeping a local copy of struct l2cap_ctrl.
BUG: KASAN: use-after-free in l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
Read of size 1 at addr ffff88812025f2f0 by task kworker/u17:3/43169
Workqueue: hci0 hci_rx_work [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4))
print_report.cold (mm/kasan/report.c:314 mm/kasan/report.c:429)
? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
kasan_report (mm/kasan/report.c:162 mm/kasan/report.c:493)
? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
l2cap_rx (net/bluetooth/l2cap_core.c:7236 net/bluetooth/l2cap_core.c:7271) bluetooth
ret_from_fork (arch/x86/entry/entry_64.S:306)
</TASK>
Allocated by task 43169:
kasan_save_stack (mm/kasan/common.c:39)
__kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469)
kmem_cache_alloc_node (mm/slab.h:750 mm/slub.c:3243 mm/slub.c:3293)
__alloc_skb (net/core/skbuff.c:414)
l2cap_recv_frag (./include/net/bluetooth/bluetooth.h:425 net/bluetooth/l2cap_core.c:8329) bluetooth
l2cap_recv_acldata (net/bluetooth/l2cap_core.c:8442) bluetooth
hci_rx_work (net/bluetooth/hci_core.c:3642 net/bluetooth/hci_core.c:3832) bluetooth
process_one_work (kernel/workqueue.c:2289)
worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2437)
kthread (kernel/kthread.c:376)
ret_from_fork (arch/x86/entry/entry_64.S:306)
Freed by task 27920:
kasan_save_stack (mm/kasan/common.c:39)
kasan_set_track (mm/kasan/common.c:45)
kasan_set_free_info (mm/kasan/generic.c:372)
____kasan_slab_free (mm/kasan/common.c:368 mm/kasan/common.c:328)
slab_free_freelist_hook (mm/slub.c:1780)
kmem_cache_free (mm/slub.c:3536 mm/slub.c:3553)
skb_free_datagram (./include/net/sock.h:1578 ./include/net/sock.h:1639 net/core/datagram.c:323)
bt_sock_recvmsg (net/bluetooth/af_bluetooth.c:295) bluetooth
l2cap_sock_recvmsg (net/bluetooth/l2cap_sock.c:1212) bluetooth
sock_read_iter (net/socket.c:1087)
new_sync_read (./include/linux/fs.h:2052 fs/read_write.c:401)
vfs_read (fs/read_write.c:482)
ksys_read (fs/read_write.c:620)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
Link: https://lore.kernel.org/linux-bluetooth/CAKErNvoqga1WcmoR3-0875esY6TVWFQDandbVZncSiuGPBQXLA@mail.gmail.com/T/#u
Fixes: d2a7ac5d5d ("Bluetooth: Add the ERTM receive state machine")
Fixes: 4b51dae967 ("Bluetooth: Add streaming mode receive and incoming packet classifier")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Here is the big set of driver core and debug printk changes for 6.1-rc1.
Included in here is:
- dynamic debug updates for the core and the drm subsystem. The
drm changes have all been acked by the relevant maintainers.
- kernfs fixes for syzbot reported problems
- kernfs refactors and updates for cgroup requirements
- magic number cleanups and removals from the kernel tree (they
were not being used and they really did not actually do
anything.)
- other tiny cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0BYUA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylozwCdFRlcghaf7XBUyNgRZRwMC+oQI8EAn1G/nEDE
6aFd2er41uK0IGQnSmYO
=OK0k
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core and debug printk changes for
6.1-rc1. Included in here is:
- dynamic debug updates for the core and the drm subsystem. The drm
changes have all been acked by the relevant maintainers
- kernfs fixes for syzbot reported problems
- kernfs refactors and updates for cgroup requirements
- magic number cleanups and removals from the kernel tree (they were
not being used and they really did not actually do anything)
- other tiny cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (74 commits)
docs: filesystems: sysfs: Make text and code for ->show() consistent
Documentation: NBD_REQUEST_MAGIC isn't a magic number
a.out: restore CMAGIC
device property: Add const qualifier to device_get_match_data() parameter
drm_print: add _ddebug descriptor to drm_*dbg prototypes
drm_print: prefer bare printk KERN_DEBUG on generic fn
drm_print: optimize drm_debug_enabled for jump-label
drm-print: add drm_dbg_driver to improve namespace symmetry
drm-print.h: include dyndbg header
drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro
drm_print: interpose drm_*dbg with forwarding macros
drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers.
drm_print: condense enum drm_debug_category
debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fops
driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs()
Documentation: ENI155_MAGIC isn't a magic number
Documentation: NBD_REPLY_MAGIC isn't a magic number
nbd: remove define-only NBD_MAGIC, previously magic number
Documentation: FW_HEADER_MAGIC isn't a magic number
Documentation: EEPROM_MAGIC_VALUE isn't a magic number
...
Here is the big set of TTY and Serial driver updates for 6.1-rc1.
Lots of cleanups in here, no real new functionality this time around,
with the diffstat being that we removed more lines than we added!
Included in here are:
- termios unification cleanups from Al Viro, it's nice to
finally get this work done
- tty serial transmit cleanups in various drivers in preparation
for more cleanup and unification in future releases (that work
was not ready for this release.)
- n_gsm fixes and updates
- ktermios cleanups and code reductions
- dt bindings json conversions and updates for new devices
- some serial driver updates for new devices
- lots of other tiny cleanups and janitorial stuff. Full
details in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0BSdA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylucQCfaXIrYuh2AHcb6+G+Nqp1xD2BYaEAoIdLyOCA
a2yziLrDF6us2oav6j4x
=Wv+X
-----END PGP SIGNATURE-----
Merge tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 6.1-rc1.
Lots of cleanups in here, no real new functionality this time around,
with the diffstat being that we removed more lines than we added!
Included in here are:
- termios unification cleanups from Al Viro, it's nice to finally get
this work done
- tty serial transmit cleanups in various drivers in preparation for
more cleanup and unification in future releases (that work was not
ready for this release)
- n_gsm fixes and updates
- ktermios cleanups and code reductions
- dt bindings json conversions and updates for new devices
- some serial driver updates for new devices
- lots of other tiny cleanups and janitorial stuff. Full details in
the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits)
serial: cpm_uart: Don't request IRQ too early for console port
tty: serial: do unlock on a common path in altera_jtaguart_console_putc()
tty: serial: unify TX space reads under altera_jtaguart_tx_space()
tty: serial: use FIELD_GET() in lqasc_tx_ready()
tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar()
tty: serial: allow pxa.c to be COMPILE_TESTed
serial: stm32: Fix unused-variable warning
tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL
serial: 8250: Fix restoring termios speed after suspend
serial: Deassert Transmit Enable on probe in driver-specific way
serial: 8250_dma: Convert to use uart_xmit_advance()
serial: 8250_omap: Convert to use uart_xmit_advance()
MAINTAINERS: Solve warning regarding inexistent atmel-usart binding
serial: stm32: Deassert Transmit Enable on ->rs485_config()
serial: ar933x: Deassert Transmit Enable on ->rs485_config()
tty: serial: atmel: Use FIELD_PREP/FIELD_GET
tty: serial: atmel: Make the driver aware of the existence of GCLK
tty: serial: atmel: Only divide Clock Divisor if the IP is USART
tty: serial: atmel: Separate mode clearing between UART and USART
dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock
...
When setting power state using legacy/non-mgmt API
(e.g hcitool hci0 up) the likes of mgmt_set_powered_complete won't be
called causing clients of the MGMT API to not be notified of the change
of the state.
Fixes: cf75ad8b41 ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>
This uses l2cap_chan_hold_unless_zero() after calling
__l2cap_get_chan_blah() to prevent the following trace:
Bluetooth: l2cap_core.c:static void l2cap_chan_destroy(struct kref
*kref)
Bluetooth: chan 0000000023c4974d
Bluetooth: parent 00000000ae861c08
==================================================================
BUG: KASAN: use-after-free in __mutex_waiter_is_first
kernel/locking/mutex.c:191 [inline]
BUG: KASAN: use-after-free in __mutex_lock_common
kernel/locking/mutex.c:671 [inline]
BUG: KASAN: use-after-free in __mutex_lock+0x278/0x400
kernel/locking/mutex.c:729
Read of size 8 at addr ffff888006a49b08 by task kworker/u3:2/389
Link: https://lore.kernel.org/lkml/20220622082716.478486-1-lee.jones@linaro.org
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Some drivers depend on shutdown being called for proper operation.
Unset HCI_USER_CHANNEL and call the full close routine since shutdown is
complementary to setup.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Suspend notifier should only be registered and unregistered once per
hdev. Simplify this by only registering during driver registration and
simply exiting early when HCI_USER_CHANNEL is set.
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 359ee4f834 (Bluetooth: Unregister suspend with userchannel)
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Change that introduced the use of __check_timeout did not account for
link types properly, it always assumes ACL_LINK is used thus causing
hdev->acl_last_tx to be used even in case of LE_LINK and then again
uses ACL_LINK with hci_link_tx_to.
To fix this __check_timeout now takes the link type as parameter and
then procedure to use the right last_tx based on the link type and pass
it to hci_link_tx_to.
Fixes: 1b1d29e514 ("Bluetooth: Make use of __check_timeout on hci_sched_le")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: David Beinder <david@beinder.at>
Appeared in its present state in pre-git (2.5.41), never used
Found with
grep MAGIC Documentation/process/magic-number.rst | while read -r mag _;
do git grep -wF "$mag" | grep -ve '^Documentation.*magic-number.rst:' \
-qe ':#define '"$mag" || git grep -wF "$mag" | while IFS=: read -r f _;
do sed -i '/\b'"$mag"'\b/d' "$f"; done ; done
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Link: https://lore.kernel.org/r/f6d375201dfd99416ea03b49b3dd40af56c1537e.1663280877.git.nabijaczleweli@nabijaczleweli.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ISO events (CIS/BIS) shall only be relevant for connection with link
type of ISO_LINK, otherwise the controller is probably buggy or it is
the result of fuzzer tools such as syzkaller.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_debugfs_create_conn shall check if conn->debugfs has already been
created and don't attempt to overwrite it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
device_add shall not be called multiple times as stated in its
documentation:
'Do not call this routine or device_register() more than once for
any device structure'
Syzkaller reports a bug as follows [1]:
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:33!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[...]
Call Trace:
<TASK>
__list_add include/linux/list.h:69 [inline]
list_add_tail include/linux/list.h:102 [inline]
kobj_kset_join lib/kobject.c:164 [inline]
kobject_add_internal+0x18f/0x8f0 lib/kobject.c:214
kobject_add_varg lib/kobject.c:358 [inline]
kobject_add+0x150/0x1c0 lib/kobject.c:410
device_add+0x368/0x1e90 drivers/base/core.c:3452
hci_conn_add_sysfs+0x9b/0x1b0 net/bluetooth/hci_sysfs.c:53
hci_le_cis_estabilished_evt+0x57c/0xae0 net/bluetooth/hci_event.c:6799
hci_le_meta_evt+0x2b8/0x510 net/bluetooth/hci_event.c:7110
hci_event_func net/bluetooth/hci_event.c:7440 [inline]
hci_event_packet+0x63d/0xfd0 net/bluetooth/hci_event.c:7495
hci_rx_work+0xae7/0x1230 net/bluetooth/hci_core.c:4007
process_one_work+0x991/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e4/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK>
Link: https://syzkaller.appspot.com/bug?id=da3246e2d33afdb92d66bc166a0934c5b146404a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Hawkins Jiawei <yin31149@gmail.com>
Use zeroing allocator rather than allocator followed by memset with 0
Generated by: scripts/coccinelle/api/alloc/zalloc-simple.cocci
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
syzbot is reporting attempt to schedule hdev->cmd_work work from system_wq
WQ into hdev->workqueue WQ which is under draining operation [1], for
commit c8efcc2589 ("workqueue: allow chained queueing during
destruction") does not allow such operation.
The check introduced by commit 877afadad2 ("Bluetooth: When HCI work
queue is drained, only queue chained work") was incomplete.
Use hdev->workqueue WQ when queuing hdev->{cmd,ncmd}_timer works because
hci_{cmd,ncmd}_timeout() calls queue_work(hdev->workqueue). Also, protect
the queuing operation with RCU read lock in order to avoid calling
queue_delayed_work() after cancel_delayed_work() completed.
Link: https://syzkaller.appspot.com/bug?extid=243b7d89777f90f7613b [1]
Reported-by: syzbot <syzbot+243b7d89777f90f7613b@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 877afadad2 ("Bluetooth: When HCI work queue is drained, only queue chained work")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
syzbot is reporting cancel_delayed_work() without INIT_DELAYED_WORK() at
l2cap_chan_del() [1], for CONF_NOT_COMPLETE flag (which meant to prevent
l2cap_chan_del() from calling cancel_delayed_work()) is cleared by timer
which fires before l2cap_chan_del() is called by closing file descriptor
created by socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_L2CAP).
l2cap_bredr_sig_cmd(L2CAP_CONF_REQ) and l2cap_bredr_sig_cmd(L2CAP_CONF_RSP)
are calling l2cap_ertm_init(chan), and they call l2cap_chan_ready() (which
clears CONF_NOT_COMPLETE flag) only when l2cap_ertm_init(chan) succeeded.
l2cap_sock_init() does not call l2cap_ertm_init(chan), and it instead sets
CONF_NOT_COMPLETE flag by calling l2cap_chan_set_defaults(). However, when
connect() is requested, "command 0x0409 tx timeout" happens after 2 seconds
from connect() request, and CONF_NOT_COMPLETE flag is cleared after 4
seconds from connect() request, for l2cap_conn_start() from
l2cap_info_timeout() callback scheduled by
schedule_delayed_work(&conn->info_timer, L2CAP_INFO_TIMEOUT);
in l2cap_connect() is calling l2cap_chan_ready().
Fix this problem by initializing delayed works used by L2CAP_MODE_ERTM
mode as soon as l2cap_chan_create() allocates a channel, like I did in
commit be85972393 ("Bluetooth: initialize skb_queue_head at
l2cap_chan_create()").
Link: https://syzkaller.appspot.com/bug?extid=83672956c7aa6af698b3 [1]
Reported-by: syzbot <syzbot+83672956c7aa6af698b3@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Due to change to switch to use lock_sock inside rfcomm_sk_state_change
the socket shutdown/release procedure can cause a deadlock:
rfcomm_sock_shutdown():
lock_sock();
__rfcomm_sock_close():
rfcomm_dlc_close():
__rfcomm_dlc_close():
rfcomm_dlc_lock();
rfcomm_sk_state_change():
lock_sock();
To fix this when the call __rfcomm_sock_close is now done without
holding the lock_sock since rfcomm_dlc_lock exists to protect
the dlc data there is no need to use lock_sock in that code path.
Link: https://lore.kernel.org/all/CAD+dNTsbuU4w+Y_P7o+VEN7BYCAbZuwZx2+tH+OTzCdcZF82YA@mail.gmail.com/
Fixes: b7ce436a5d ("Bluetooth: switch to lock_sock in RFCOMM")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Address resolution will be paused during active scan to allow any
advertising reports reach the host. If LL privacy is enabled,
advertising will rely on the controller to generate new RPA.
If host is not using RPA, there is no need to stop advertising during
active scan because there is no need to generate RPA in the controller.
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
syzbot is again reporting attempt to cancel uninitialized work
at mgmt_index_removed() [1], for setting of HCI_MGMT flag from
mgmt_init_hdev() from hci_mgmt_cmd() from hci_sock_sendmsg() can
race with testing of HCI_MGMT flag from mgmt_index_removed() from
hci_sock_bind() due to lack of serialization via hci_dev_lock().
Since mgmt_init_hdev() is called with mgmt_chan_list_lock held, we can
safely split hci_dev_test_and_set_flag() into hci_dev_test_flag() and
hci_dev_set_flag(). Thus, in order to close this race, set HCI_MGMT flag
after INIT_DELAYED_WORK() completed.
This is a local fix based on mgmt_chan_list_lock. Lack of serialization
via hci_dev_lock() might be causing different race conditions somewhere
else. But a global fix based on hci_dev_lock() should deserve a future
patch.
Link: https://syzkaller.appspot.com/bug?extid=844c7bf1b1aa4119c5de
Reported-by: syzbot+844c7bf1b1aa4119c5de@syzkaller.appspotmail.com
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 3f2893d3c1 ("Bluetooth: don't try to cancel uninitialized works at mgmt_index_removed()")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_read_buffer_size_sync shall not use HCI_OP_LE_READ_BUFFER_SIZE_V2
sinze that is LE specific, instead it is hci_le_read_buffer_size_sync
version that shall use it.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216382
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces a "Mesh UUID" and an Experimental Feature bit to the
hdev mask, and depending all underlying Mesh functionality on it.
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The patch adds state bits, storage and HCI command chains for sending
and receiving Bluetooth Mesh advertising packets, and delivery to
requesting user space processes. It specifically creates 4 new MGMT
commands and 2 new MGMT events:
MGMT_OP_SET_MESH_RECEIVER - Sets passive scan parameters and a list of
AD Types which will trigger Mesh Packet Received events
MGMT_OP_MESH_READ_FEATURES - Returns information on how many outbound
Mesh packets can be simultaneously queued, and what the currently queued
handles are.
MGMT_OP_MESH_SEND - Command to queue a specific outbound Mesh packet,
with the number of times it should be sent, and the BD Addr to use.
Discrete advertisments are added to the ADV Instance list.
MGMT_OP_MESH_SEND_CANCEL - Command to cancel a prior outbound message
request.
MGMT_EV_MESH_DEVICE_FOUND - Event to deliver entire received Mesh
Advertisement packet, along with timing information.
MGMT_EV_MESH_PACKET_CMPLT - Event to indicate that an outbound packet is
no longer queued for delivery.
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_read_buffer_size_sync shall not use HCI_OP_LE_READ_BUFFER_SIZE_V2
sinze that is LE specific, instead it is hci_le_read_buffer_size_sync
version that shall use it.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216382
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_abort_conn() is a wrapper around a number of DISCONNECT and
CREATE_CONN_CANCEL commands that was being invoked from hci_request
request queues, which are now deprecated. There are two versions:
hci_abort_conn() which can be invoked from the hci_event thread, and
hci_abort_conn_sync() which can be invoked within a hci_sync cmd chain.
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The HCI_OP_READ_ENC_KEY_SIZE command is converted from using the
deprecated hci_request mechanism to use hci_send_cmd, with an
accompanying hci_cc_read_enc_key_size to handle it's return response.
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There should be no reason to adjust old ktermios which is going to get
discarded anyway.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220816115739.10928-9-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When disconnecting all devices, hci_conn_failed is used to cleanup
hci_conn object when the hci_conn object cannot be aborted.
The function hci_conn_failed requires the caller holds hdev->lock.
Fixes: 9b3628d79b ("Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted")
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
To prevent multiple conn complete events, we shouldn't look up the
conn with hci_lookup_le_connect, since it requires the state to be
BT_CONNECT. By the time the duplicate event is processed, the state
might have changed, so we end up processing the new event anyway.
Change the lookup function to hci_conn_hash_lookup_ba.
Fixes: d5ebaa7c5f ("Bluetooth: hci_event: Ignore multiple conn complete events")
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In order to properly handle shutdown syscall the code shall not assume
that the how argument is always SHUT_RDWR resulting in SHUTDOWN_MASK as
that would result in poll to immediately report EPOLLHUP instead of
properly waiting for disconnect_cfm (Disconnect Complete) which is
rather important for the likes of BAP as the CIG may need to be
reprogrammed.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Get Device Flags don't check if device does actually use an RPA in which
case it shall only set HCI_CONN_FLAG_REMOTE_WAKEUP if LL Privacy is
enabled.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempts to fix the follow errors:
In function 'memcmp',
inlined from 'bacmp' at ./include/net/bluetooth/bluetooth.h:347:9,
inlined from 'l2cap_global_chan_by_psm' at
net/bluetooth/l2cap_core.c:2003:15:
./include/linux/fortify-string.h:44:33: error: '__builtin_memcmp'
specified bound 6 exceeds source size 0 [-Werror=stringop-overread]
44 | #define __underlying_memcmp __builtin_memcmp
| ^
./include/linux/fortify-string.h:420:16: note: in expansion of macro
'__underlying_memcmp'
420 | return __underlying_memcmp(p, q, size);
| ^~~~~~~~~~~~~~~~~~~
In function 'memcmp',
inlined from 'bacmp' at ./include/net/bluetooth/bluetooth.h:347:9,
inlined from 'l2cap_global_chan_by_psm' at
net/bluetooth/l2cap_core.c:2004:15:
./include/linux/fortify-string.h:44:33: error: '__builtin_memcmp'
specified bound 6 exceeds source size 0 [-Werror=stringop-overread]
44 | #define __underlying_memcmp __builtin_memcmp
| ^
./include/linux/fortify-string.h:420:16: note: in expansion of macro
'__underlying_memcmp'
420 | return __underlying_memcmp(p, q, size);
| ^~~~~~~~~~~~~~~~~~~
Fixes: 332f1795ca ("Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm regression")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempts to fix suspend performance when there is no connections by
not updating the event mask.
Fixes: ef61b6ea15 ("Bluetooth: Always set event mask on suspend")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit c8992cffbe ("Bluetooth: hci_event: Use of a function table to
handle Command Complete") was (presumably) meant to only refactor things
without any functional changes.
But it does have one undesirable side-effect, before *status would always
be set to skb->data[0] and it might be overridden by some of the opcode
specific handling. While now it always set by the opcode specific handlers.
This means that if the opcode is not known *status does not get set any
more at all!
This behavior change has broken bluetooth support for BCM4343A0 HCIs,
the hci_bcm.c code tries to configure UART attached HCIs at a higher
baudraute using vendor specific opcodes. The BCM4343A0 does not
support this and this used to simply fail:
[ 25.646442] Bluetooth: hci0: BCM: failed to write clock (-56)
[ 25.646481] Bluetooth: hci0: Failed to set baudrate
After which things would continue with the initial baudraute. But now
that hci_cmd_complete_evt() no longer sets status for unknown opcodes
*status is left at 0. This causes the hci_bcm.c code to think the baudraute
has been changed on the HCI side and to also adjust the UART baudrate,
after which communication with the HCI is broken, leading to:
[ 28.579042] Bluetooth: hci0: command 0x0c03 tx timeout
[ 36.961601] Bluetooth: hci0: BCM: Reset failed (-110)
And non working bluetooth. Fix this by restoring the previous
default "*status = skb->data[0]" handling for unknown opcodes.
Fixes: c8992cffbe ("Bluetooth: hci_event: Use of a function table to handle Command Complete")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When disconnecting all devices, hci_conn_failed is used to cleanup
hci_conn object when the hci_conn object cannot be aborted.
The function hci_conn_failed requires the caller holds hdev->lock.
Fixes: 9b3628d79b ("Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted")
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
To prevent multiple conn complete events, we shouldn't look up the
conn with hci_lookup_le_connect, since it requires the state to be
BT_CONNECT. By the time the duplicate event is processed, the state
might have changed, so we end up processing the new event anyway.
Change the lookup function to hci_conn_hash_lookup_ba.
Fixes: d5ebaa7c5f ("Bluetooth: hci_event: Ignore multiple conn complete events")
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In order to properly handle shutdown syscall the code shall not assume
that the how argument is always SHUT_RDWR resulting in SHUTDOWN_MASK as
that would result in poll to immediately report EPOLLHUP instead of
properly waiting for disconnect_cfm (Disconnect Complete) which is
rather important for the likes of BAP as the CIG may need to be
reprogrammed.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Get Device Flags don't check if device does actually use an RPA in which
case it shall only set HCI_CONN_FLAG_REMOTE_WAKEUP if LL Privacy is
enabled.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempts to fix the follow errors:
In function 'memcmp',
inlined from 'bacmp' at ./include/net/bluetooth/bluetooth.h:347:9,
inlined from 'l2cap_global_chan_by_psm' at
net/bluetooth/l2cap_core.c:2003:15:
./include/linux/fortify-string.h:44:33: error: '__builtin_memcmp'
specified bound 6 exceeds source size 0 [-Werror=stringop-overread]
44 | #define __underlying_memcmp __builtin_memcmp
| ^
./include/linux/fortify-string.h:420:16: note: in expansion of macro
'__underlying_memcmp'
420 | return __underlying_memcmp(p, q, size);
| ^~~~~~~~~~~~~~~~~~~
In function 'memcmp',
inlined from 'bacmp' at ./include/net/bluetooth/bluetooth.h:347:9,
inlined from 'l2cap_global_chan_by_psm' at
net/bluetooth/l2cap_core.c:2004:15:
./include/linux/fortify-string.h:44:33: error: '__builtin_memcmp'
specified bound 6 exceeds source size 0 [-Werror=stringop-overread]
44 | #define __underlying_memcmp __builtin_memcmp
| ^
./include/linux/fortify-string.h:420:16: note: in expansion of macro
'__underlying_memcmp'
420 | return __underlying_memcmp(p, q, size);
| ^~~~~~~~~~~~~~~~~~~
Fixes: 332f1795ca ("Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm regression")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempts to fix suspend performance when there is no connections by
not updating the event mask.
Fixes: ef61b6ea15 ("Bluetooth: Always set event mask on suspend")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit c8992cffbe ("Bluetooth: hci_event: Use of a function table to
handle Command Complete") was (presumably) meant to only refactor things
without any functional changes.
But it does have one undesirable side-effect, before *status would always
be set to skb->data[0] and it might be overridden by some of the opcode
specific handling. While now it always set by the opcode specific handlers.
This means that if the opcode is not known *status does not get set any
more at all!
This behavior change has broken bluetooth support for BCM4343A0 HCIs,
the hci_bcm.c code tries to configure UART attached HCIs at a higher
baudraute using vendor specific opcodes. The BCM4343A0 does not
support this and this used to simply fail:
[ 25.646442] Bluetooth: hci0: BCM: failed to write clock (-56)
[ 25.646481] Bluetooth: hci0: Failed to set baudrate
After which things would continue with the initial baudraute. But now
that hci_cmd_complete_evt() no longer sets status for unknown opcodes
*status is left at 0. This causes the hci_bcm.c code to think the baudraute
has been changed on the HCI side and to also adjust the UART baudrate,
after which communication with the HCI is broken, leading to:
[ 28.579042] Bluetooth: hci0: command 0x0c03 tx timeout
[ 36.961601] Bluetooth: hci0: BCM: Reset failed (-110)
And non working bluetooth. Fix this by restoring the previous
default "*status = skb->data[0]" handling for unknown opcodes.
Fixes: c8992cffbe ("Bluetooth: hci_event: Use of a function table to handle Command Complete")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_update_adv_data() is called from hci_event and hci_core due to
events from the controller. The prior function used the deprecated
hci_request method, and the new one uses hci_sync.c
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This function has no dependencies on the deprecated hci_request
mechanism, so has been moved unchanged to hci_sync.c
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch deletes a whole bunch of code no longer reached because the
functionality was recoded using hci_sync.c
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Advertising Instance expiration timer adv_instance_expire was
handled with the deprecated hci_request mechanism, rather than it's
replacement: hci_sync.
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Recoding HCI cmds to offload SCO codec to use hci_sync mechanism rather
than deprecated hci_request mechanism.
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_req_stop_discovery has been deprecated in favor of
hci_stop_discovery_sync() as part of transition to hci_sync.c
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
le_scan_restart delayed work queue was running as a deprecated
hci_request instead of on the newer thread-safe hci_sync mechanism.
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The le_scan_disable timeout was being performed on the deprecated
hci_request.c mechanism. This timeout is performed in hci_sync.c
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes using wrong QoS settings when attempting to send frames while
acting as peripheral since the QoS settings in use are stored in
hconn->iso_qos not in sk->qos, this is actually properly handled on
getsockopt(BT_ISO_QOS) but not on iso_send_frame.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
syzbot is reporting attempt to cancel uninitialized work at
mgmt_index_removed() [1], for calling cancel_delayed_work_sync() without
INIT_DELAYED_WORK() is not permitted.
INIT_DELAYED_WORK() is called from mgmt_init_hdev() via chan->hdev_init()
from hci_mgmt_cmd(), but cancel_delayed_work_sync() is unconditionally
called from mgmt_index_removed().
Call cancel_delayed_work_sync() only if HCI_MGMT flag was set, for
mgmt_init_hdev() sets HCI_MGMT flag when calling INIT_DELAYED_WORK().
Link: https://syzkaller.appspot.com/bug?extid=b8ddd338a8838e581b1c [1]
Reported-by: syzbot <syzbot+b8ddd338a8838e581b1c@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 0ef08313ce ("Bluetooth: Convert delayed discov_off to hci_sync")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BT_DEFER_SETUP shall be considered valid for all states except for
BT_CONNECTED as it is also used when initiated a connection rather then
only for BT_BOUND and BT_LISTEN.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the following warning when building with make C=1:
net/bluetooth/mgmt.c:3821:29: warning: restricted __le16 degrades to integer
net/bluetooth/mgmt.c:4625:9: warning: cast to restricted __le32
Fixes: 600a87490f ("Bluetooth: Implementation of MGMT_OP_SET_BLOCKED_KEYS.")
Fixes: 4c54bf2b09 ("Bluetooth: Add get/set device flags mgmt op")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the following warning when build with make C=1:
net/bluetooth/hci_event.c:337:15: warning: restricted __le16 degrades to integer
Fixes: a936612036 ("Bluetooth: Process result of HCI Delete Stored Link Key command")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The following memory corruption can happen since iso_pinfo.base size
did not account for its headers (4 bytes):
net/bluetooth/eir.c
76 memcpy(&eir[eir_len], data, data_len);
^^^^^^^ ^^^^^^^^
77 eir_len += data_len;
78
79 return eir_len;
80 }
The "eir" buffer has 252 bytes and data_len is 252 but we do a memcpy()
to &eir[4] so this can corrupt 4 bytes beyond the end of the buffer.
Fixes: f764a6c2c1 ("Bluetooth: ISO: Add broadcast support")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
__hci_cmd_sync returns NULL if the controller responds with a status
event. This is unexpected for the commands sent here, but on
occurrence leads to null pointer dereferences and thus must be
handled.
Signed-off-by: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The C standard rules for when struct holes are zeroed out are slightly
weird. The existing assignments might initialize everything, but GCC
is allowed to (and does sometimes) leave the struct holes uninitialized,
so instead of using yet another variable and copy the QoS settings just
use a pointer to the stored QoS settings.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BT_ISO_QOS has different semantics when it comes to QoS PHY as it uses
0x00 to disable a direction but that value is invalid over HCI and
sockets using DEFER_SETUP to connect may attempt to use hci_bind_cis
multiple times in order to detect if the parameters have changed, so to
fix the code will now just mirror the PHY for the parameters of
HCI_OP_LE_SET_CIG_PARAMS and will not update the PHY of the socket
leaving it disabled.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Call release_sock(sk); before returning on this error path.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The patch d0be8347c6: "Bluetooth: L2CAP: Fix use-after-free caused
by l2cap_chan_put" from Jul 21, 2022, leads to the following Smatch
static checker warning:
net/bluetooth/l2cap_core.c:1977 l2cap_global_chan_by_psm()
error: we previously assumed 'c' could be null (see line 1996)
Fixes: d0be8347c6 ("Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the following trace which is caused by hci_rx_work starting up
*after* the final channel reference has been put() during sock_close() but
*before* the references to the channel have been destroyed, so instead
the code now rely on kref_get_unless_zero/l2cap_chan_hold_unless_zero to
prevent referencing a channel that is about to be destroyed.
refcount_t: increment on 0; use-after-free.
BUG: KASAN: use-after-free in refcount_dec_and_test+0x20/0xd0
Read of size 4 at addr ffffffc114f5bf18 by task kworker/u17:14/705
CPU: 4 PID: 705 Comm: kworker/u17:14 Tainted: G S W
4.14.234-00003-g1fb6d0bd49a4-dirty #28
Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150
Google Inc. MSM sm8150 Flame DVT (DT)
Workqueue: hci0 hci_rx_work
Call trace:
dump_backtrace+0x0/0x378
show_stack+0x20/0x2c
dump_stack+0x124/0x148
print_address_description+0x80/0x2e8
__kasan_report+0x168/0x188
kasan_report+0x10/0x18
__asan_load4+0x84/0x8c
refcount_dec_and_test+0x20/0xd0
l2cap_chan_put+0x48/0x12c
l2cap_recv_frame+0x4770/0x6550
l2cap_recv_acldata+0x44c/0x7a4
hci_acldata_packet+0x100/0x188
hci_rx_work+0x178/0x23c
process_one_work+0x35c/0x95c
worker_thread+0x4cc/0x960
kthread+0x1a8/0x1c4
ret_from_fork+0x10/0x18
Cc: stable@kernel.org
Reported-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When suspending, always set the event mask once disconnects are
successful. Otherwise, if wakeup is disallowed, the event mask is not
set before suspend continues and can result in an early wakeup.
Fixes: 182ee45da0 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Cc: stable@vger.kernel.org
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
