'pushd' ... 'popd' is the last bash-specific code in this script.
One way to avoid it is to run the code in a sub-shell.
With that addressed, you can run this script with sh.
I replaced $(BASH) with $(CONFIG_SHELL), and I changed the hashbang
to #!/bin/sh.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This script copies headers by the cpio command twice; first from
srctree, and then from objtree. However, when we building in-tree,
we know the srctree and the objtree are the same. That is, all the
headers copied by the first cpio are overwritten by the second one.
Skip the first cpio when we are building in-tree.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This script computes md5sum of headers in srctree and in objtree.
However, when we are building in-tree, we know the srctree and the
objtree are the same. That is, we end up with the same computation
twice. In fact, the first two lines of kernel/kheaders.md5 are always
the same for in-tree builds.
Unify the two md5sum calculations.
For in-tree builds ($building_out_of_srctree is empty), we check
only two directories, "include", and "arch/$SRCARCH/include".
For out-of-tree builds ($building_out_of_srctree is 1), we check
4 directories, "$srctree/include", "$srctree/arch/$SRCARCH/include",
"include", and "arch/$SRCARCH/include" since we know they are all
different.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The 'head' and 'tail' commands can take a file path directly.
So, you do not need to run 'cat'.
cat kernel/kheaders.md5 | head -1
... is equivalent to:
head -1 kernel/kheaders.md5
and the latter saves forking one process.
While I was here, I replaced 'head -1' with 'head -n 1'.
I also replaced '==' with '=' since we do not have a good reason to
use the bashism.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Pull timer fixes from Thomas Gleixner:
"A small set of fixes for timekeepoing and clocksource drivers:
- VDSO data was updated conditional on the availability of a VDSO
capable clocksource. This causes the VDSO functions which do not
depend on a VDSO capable clocksource to operate on stale data.
Always update unconditionally.
- Prevent a double free in the mediatek driver
- Use the proper helper in the sh_mtu2 driver so it won't attempt to
initialize non-existing interrupts"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping/vsyscall: Update VDSO data unconditionally
clocksource/drivers/sh_mtu2: Do not loop using platform_get_irq_by_name()
clocksource/drivers/mediatek: Fix error handling
Pull scheduler fixes from Thomas Gleixner:
"Two fixes for scheduler regressions:
- Plug a subtle race condition which was introduced with the rework
of the next task selection functionality. The change of task
properties became unprotected which can be observed inconsistently
causing state corruption.
- A trivial compile fix for CONFIG_CGROUPS=n"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix pick_next_task() vs 'change' pattern race
sched/core: Fix compilation error when cgroup not selected
Pull irq fixlet from Thomas Gleixner:
"A trivial fix for a kernel doc regression where an argument change was
not reflected in the documentation"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irq/irqdomain: Update __irq_domain_alloc_fwnode() function documentation
Pull stacktrace fix from Thomas Gleixner:
"A small fix for a stacktrace regression.
Saving a stacktrace for a foreign task skipped an extra entry which
makes e.g. the output of /proc/$PID/stack incomplete"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
stacktrace: Don't skip first entry on noncurrent tasks
Pull networking fixes from David Miller:
1) BPF sample build fixes from Björn Töpel
2) Fix powerpc bpf tail call implementation, from Eric Dumazet.
3) DCCP leaks jiffies on the wire, fix also from Eric Dumazet.
4) Fix crash in ebtables when using dnat target, from Florian Westphal.
5) Fix port disable handling whne removing bcm_sf2 driver, from Florian
Fainelli.
6) Fix kTLS sk_msg trim on fallback to copy mode, from Jakub Kicinski.
7) Various KCSAN fixes all over the networking, from Eric Dumazet.
8) Memory leaks in mlx5 driver, from Alex Vesker.
9) SMC interface refcounting fix, from Ursula Braun.
10) TSO descriptor handling fixes in stmmac driver, from Jose Abreu.
11) Add a TX lock to synchonize the kTLS TX path properly with crypto
operations. From Jakub Kicinski.
12) Sock refcount during shutdown fix in vsock/virtio code, from Stefano
Garzarella.
13) Infinite loop in Intel ice driver, from Colin Ian King.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
ixgbe: need_wakeup flag might not be set for Tx
i40e: need_wakeup flag might not be set for Tx
igb/igc: use ktime accessors for skb->tstamp
i40e: Fix for ethtool -m issue on X722 NIC
iavf: initialize ITRN registers with correct values
ice: fix potential infinite loop because loop counter being too small
qede: fix NULL pointer deref in __qede_remove()
net: fix data-race in neigh_event_send()
vsock/virtio: fix sock refcnt holding during the shutdown
net: ethernet: octeon_mgmt: Account for second possible VLAN header
mac80211: fix station inactive_time shortly after boot
net/fq_impl: Switch to kvmalloc() for memory allocation
mac80211: fix ieee80211_txq_setup_flows() failure path
ipv4: Fix table id reference in fib_sync_down_addr
ipv6: fixes rt6_probe() and fib6_nh->last_probe init
net: hns: Fix the stray netpoll locks causing deadlock in NAPI path
net: usb: qmi_wwan: add support for DW5821e with eSIM support
CDC-NCM: handle incomplete transfer of MTU
nfc: netlink: fix double device reference drop
NFC: st21nfca: fix double free
...
Commit 67692435c4 ("sched: Rework pick_next_task() slow-path")
inadvertly introduced a race because it changed a previously
unexplored dependency between dropping the rq->lock and
sched_class::put_prev_task().
The comments about dropping rq->lock, in for example
newidle_balance(), only mentions the task being current and ->on_cpu
being set. But when we look at the 'change' pattern (in for example
sched_setnuma()):
queued = task_on_rq_queued(p); /* p->on_rq == TASK_ON_RQ_QUEUED */
running = task_current(rq, p); /* rq->curr == p */
if (queued)
dequeue_task(...);
if (running)
put_prev_task(...);
/* change task properties */
if (queued)
enqueue_task(...);
if (running)
set_next_task(...);
It becomes obvious that if we do this after put_prev_task() has
already been called on @p, things go sideways. This is exactly what
the commit in question allows to happen when it does:
prev->sched_class->put_prev_task(rq, prev, rf);
if (!rq->nr_running)
newidle_balance(rq, rf);
The newidle_balance() call will drop rq->lock after we've called
put_prev_task() and that allows the above 'change' pattern to
interleave and mess up the state.
Furthermore, it turns out we lost the RT-pull when we put the last DL
task.
Fix both problems by extracting the balancing from put_prev_task() and
doing a multi-class balance() pass before put_prev_task().
Fixes: 67692435c4 ("sched: Rework pick_next_task() slow-path")
Reported-by: Quentin Perret <qperret@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Quentin Perret <qperret@google.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
When cgroup is disabled the following compilation error was hit
kernel/sched/core.c: In function ‘uclamp_update_active_tasks’:
kernel/sched/core.c:1081:23: error: storage size of ‘it’ isn’t known
struct css_task_iter it;
^~
kernel/sched/core.c:1084:2: error: implicit declaration of function ‘css_task_iter_start’; did you mean ‘__sg_page_iter_start’? [-Werror=implicit-function-declaration]
css_task_iter_start(css, 0, &it);
^~~~~~~~~~~~~~~~~~~
__sg_page_iter_start
kernel/sched/core.c:1085:14: error: implicit declaration of function ‘css_task_iter_next’; did you mean ‘__sg_page_iter_next’? [-Werror=implicit-function-declaration]
while ((p = css_task_iter_next(&it))) {
^~~~~~~~~~~~~~~~~~
__sg_page_iter_next
kernel/sched/core.c:1091:2: error: implicit declaration of function ‘css_task_iter_end’; did you mean ‘get_task_cred’? [-Werror=implicit-function-declaration]
css_task_iter_end(&it);
^~~~~~~~~~~~~~~~~
get_task_cred
kernel/sched/core.c:1081:23: warning: unused variable ‘it’ [-Wunused-variable]
struct css_task_iter it;
^~
cc1: some warnings being treated as errors
make[2]: *** [kernel/sched/core.o] Error 1
Fix by protetion uclamp_update_active_tasks() with
CONFIG_UCLAMP_TASK_GROUP
Fixes: babbe170e0 ("sched/uclamp: Update CPU's refcount on TG's clamp changes")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Patrick Bellasi <patrick.bellasi@matbug.net>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Ben Segall <bsegall@google.com>
Link: https://lkml.kernel.org/r/20191105112212.596-1-qais.yousef@arm.com
Daniel Borkmann says:
====================
pull-request: bpf 2019-11-02
The following pull-request contains BPF updates for your *net* tree.
We've added 6 non-merge commits during the last 6 day(s) which contain
a total of 8 files changed, 35 insertions(+), 9 deletions(-).
The main changes are:
1) Fix ppc BPF JIT's tail call implementation by performing a second pass
to gather a stable JIT context before opcode emission, from Eric Dumazet.
2) Fix build of BPF samples sys_perf_event_open() usage to compiled out
unavailable test_attr__{enabled,open} checks. Also fix potential overflows
in bpf_map_{area_alloc,charge_init} on 32 bit archs, from Björn Töpel.
3) Fix narrow loads of bpf_sysctl context fields with offset > 0 on big endian
archs like s390x and also improve the test coverage, from Ilya Leoshkevich.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXcGMxwAKCRCRxhvAZXjc
otEzAP9lHvP97TtRG9gP6dj6YovZ5Djdo3IscmkTqy5Nt8sVNQD+NWg1LZnSMFdJ
ExETgRVlsjF8q2sblswtn/8Ab53O6AM=
=RVGl
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2019-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull clone3 stack argument update from Christian Brauner:
"This changes clone3() to do basic stack validation and to set up the
stack depending on whether or not it is growing up or down.
With clone3() the expectation is now very simply that the .stack
argument points to the lowest address of the stack and that
.stack_size specifies the initial stack size. This is diferent from
legacy clone() where the "stack" argument had to point to the lowest
or highest address of the stack depending on the architecture.
clone3() was released with 5.3. Currently, it is not documented and
very unclear to userspace how the stack and stack_size argument have
to be passed. After talking to glibc folks we concluded that changing
clone3() to determine stack direction and doing basic validation is
the right course of action.
Note, this is a potentially user visible change. In the very unlikely
case, that it breaks someone's use-case we will revert. (And then e.g.
place the new behavior under an appropriate flag.)
Note that passing an empty stack will continue working just as before.
Breaking someone's use-case is very unlikely. Neither glibc nor musl
currently expose a wrapper for clone3(). There is currently also no
real motivation for anyone to use clone3() directly. First, because
using clone{3}() with stacks requires some assembly (see glibc and
musl). Second, because it does not provide features that legacy
clone() doesn't. New features for clone3() will first happen in v5.5
which is why v5.4 is still a good time to try and make that change now
and backport it to v5.3.
I did a codesearch on https://codesearch.debian.net, github, and
gitlab and could not find any software currently relying directly on
clone3(). I expect this to change once we land CLONE_CLEAR_SIGHAND
which was a request coming from glibc at which point they'll likely
start using it"
* tag 'for-linus-2019-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
clone3: validate stack arguments
Validate the stack arguments and setup the stack depening on whether or not
it is growing down or up.
Legacy clone() required userspace to know in which direction the stack is
growing and pass down the stack pointer appropriately. To make things more
confusing microblaze uses a variant of the clone() syscall selected by
CONFIG_CLONE_BACKWARDS3 that takes an additional stack_size argument.
IA64 has a separate clone2() syscall which also takes an additional
stack_size argument. Finally, parisc has a stack that is growing upwards.
Userspace therefore has a lot nasty code like the following:
#define __STACK_SIZE (8 * 1024 * 1024)
pid_t sys_clone(int (*fn)(void *), void *arg, int flags, int *pidfd)
{
pid_t ret;
void *stack;
stack = malloc(__STACK_SIZE);
if (!stack)
return -ENOMEM;
#ifdef __ia64__
ret = __clone2(fn, stack, __STACK_SIZE, flags | SIGCHLD, arg, pidfd);
#elif defined(__parisc__) /* stack grows up */
ret = clone(fn, stack, flags | SIGCHLD, arg, pidfd);
#else
ret = clone(fn, stack + __STACK_SIZE, flags | SIGCHLD, arg, pidfd);
#endif
return ret;
}
or even crazier variants such as [3].
With clone3() we have the ability to validate the stack. We can check that
when stack_size is passed, the stack pointer is valid and the other way
around. We can also check that the memory area userspace gave us is fine to
use via access_ok(). Furthermore, we probably should not require
userspace to know in which direction the stack is growing. It is easy
for us to do this in the kernel and I couldn't find the original
reasoning behind exposing this detail to userspace.
/* Intentional user visible API change */
clone3() was released with 5.3. Currently, it is not documented and very
unclear to userspace how the stack and stack_size argument have to be
passed. After talking to glibc folks we concluded that trying to change
clone3() to setup the stack instead of requiring userspace to do this is
the right course of action.
Note, that this is an explicit change in user visible behavior we introduce
with this patch. If it breaks someone's use-case we will revert! (And then
e.g. place the new behavior under an appropriate flag.)
Breaking someone's use-case is very unlikely though. First, neither glibc
nor musl currently expose a wrapper for clone3(). Second, there is no real
motivation for anyone to use clone3() directly since it does not provide
features that legacy clone doesn't. New features for clone3() will first
happen in v5.5 which is why v5.4 is still a good time to try and make that
change now and backport it to v5.3. Searches on [4] did not reveal any
packages calling clone3().
[1]: https://lore.kernel.org/r/CAG48ez3q=BeNcuVTKBN79kJui4vC6nw0Bfq6xc-i0neheT17TA@mail.gmail.com
[2]: https://lore.kernel.org/r/20191028172143.4vnnjpdljfnexaq5@wittgenstein
[3]: 5238e95759/src/basic/raw-clone.h (L31)
[4]: https://codesearch.debian.net
Fixes: 7f192e3cd3 ("fork: add clone3")
Cc: Kees Cook <keescook@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-api@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # 5.3
Cc: GNU C Library <libc-alpha@sourceware.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20191031113608.20713-1-christian.brauner@ubuntu.com
A recent commit changed a parameter of __irq_domain_alloc_fwnode(), but
did not update the documentation comment. Fix it up.
Fixes: b977fcf477 ("irqdomain/debugfs: Use PAs to generate fwnode names")
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1571476047-29463-1-git-send-email-wang.yi59@zte.com.cn
The update of the VDSO data is depending on __arch_use_vsyscall() returning
True. This is a leftover from the attempt to map the features of various
architectures 1:1 into generic code.
The usage of __arch_use_vsyscall() in the actual vsyscall implementations
got dropped and replaced by the requirement for the architecture code to
return U64_MAX if the global clocksource is not usable in the VDSO.
But the __arch_use_vsyscall() check in the update code stayed which causes
the VDSO data to be stale or invalid when an architecture actually
implements that function and returns False when the current clocksource is
not usable in the VDSO.
As a consequence the VDSO implementations of clock_getres(), time(),
clock_gettime(CLOCK_.*_COARSE) operate on invalid data and return bogus
information.
Remove the __arch_use_vsyscall() check from the VDSO update function and
update the VDSO data unconditionally.
[ tglx: Massaged changelog and removed the now useless implementations in
asm-generic/ARM64/MIPS ]
Fixes: 44f57d788e ("timekeeping: Provide a generic update_vsyscall() implementation")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1571887709-11447-1-git-send-email-chenhc@lemote.com
When doing cat /proc/<PID>/stack, the output is missing the first entry.
When the current code walks the stack starting in stack_trace_save_tsk,
it skips all scheduler functions (that's OK) plus one more function. But
this one function should be skipped only for the 'current' task as it is
stack_trace_save_tsk proper.
The original code (before the common infrastructure) skipped one
function only for the 'current' task -- see save_stack_trace_tsk before
3599fe12a1. So do so also in the new infrastructure now.
Fixes: 214d8ca6ee ("stacktrace: Provide common infrastructure")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20191030072545.19462-1-jslaby@suse.cz
Pull networking fixes from David Miller:
1) Fix free/alloc races in batmanadv, from Sven Eckelmann.
2) Several leaks and other fixes in kTLS support of mlx5 driver, from
Tariq Toukan.
3) BPF devmap_hash cost calculation can overflow on 32-bit, from Toke
Høiland-Jørgensen.
4) Add an r8152 device ID, from Kazutoshi Noguchi.
5) Missing include in ipv6's addrconf.c, from Ben Dooks.
6) Use siphash in flow dissector, from Eric Dumazet. Attackers can
easily infer the 32-bit secret otherwise etc.
7) Several netdevice nesting depth fixes from Taehee Yoo.
8) Fix several KCSAN reported errors, from Eric Dumazet. For example,
when doing lockless skb_queue_empty() checks, and accessing
sk_napi_id/sk_incoming_cpu lockless as well.
9) Fix jumbo packet handling in RXRPC, from David Howells.
10) Bump SOMAXCONN and tcp_max_syn_backlog values, from Eric Dumazet.
11) Fix DMA synchronization in gve driver, from Yangchun Fu.
12) Several bpf offload fixes, from Jakub Kicinski.
13) Fix sk_page_frag() recursion during memory reclaim, from Tejun Heo.
14) Fix ping latency during high traffic rates in hisilicon driver, from
Jiangfent Xiao.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
net: fix installing orphaned programs
net: cls_bpf: fix NULL deref on offload filter removal
selftests: bpf: Skip write only files in debugfs
selftests: net: reuseport_dualstack: fix uninitalized parameter
r8169: fix wrong PHY ID issue with RTL8168dp
net: dsa: bcm_sf2: Fix IMP setup for port different than 8
net: phylink: Fix phylink_dbg() macro
gve: Fixes DMA synchronization.
inet: stop leaking jiffies on the wire
ixgbe: Remove duplicate clear_bit() call
Documentation: networking: device drivers: Remove stray asterisks
e1000: fix memory leaks
i40e: Fix receive buffer starvation for AF_XDP
igb: Fix constant media auto sense switching when no cable is connected
net: ethernet: arc: add the missed clk_disable_unprepare
igb: Enable media autosense for the i350.
igb/igc: Don't warn on fatal read failures when the device is removed
tcp: increase tcp_max_syn_backlog max value
net: increase SOMAXCONN to 4096
netdevsim: Fix use-after-free during device dismantle
...
Pull scheduler fixes from Ingo Molnar:
"Fix two scheduler topology bugs/oversights on Juno r0 2+4 big.LITTLE
systems"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/topology: Allow sched_asym_cpucapacity to be disabled
sched/topology: Don't try to build empty sched domains
The functions bpf_map_area_alloc() and bpf_map_charge_init() prior
this commit passed the size parameter as size_t. In this commit this
is changed to u64.
All users of these functions avoid size_t overflows on 32-bit systems,
by explicitly using u64 when calculating the allocation size and
memory charge cost. However, since the result was narrowed by the
size_t when passing size and cost to the functions, the overflow
handling was in vain.
Instead of changing all call sites to size_t and handle overflow at
the call site, the parameter is changed to u64 and checked in the
functions above.
Fixes: d407bd25a2 ("bpf: don't trigger OOM killer under pressure with map alloc")
Fixes: c85d69135a ("bpf: move memory size checks to bpf_map_charge_init()")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Link: https://lore.kernel.org/bpf/20191029154307.23053-1-bjorn.topel@gmail.com
"ctx:file_pos sysctl:read read ok narrow" works on s390 by accident: it
reads the wrong byte, which happens to have the expected value of 0.
Improve the test by seeking to the 4th byte and expecting 4 instead of
0.
This makes the latent problem apparent: the test attempts to read the
first byte of bpf_sysctl.file_pos, assuming this is the least-significant
byte, which is not the case on big-endian machines: a non-zero offset is
needed.
The point of the test is to verify narrow loads, so we cannot cheat our
way out by simply using BPF_W. The existence of the test means that such
loads have to be supported, most likely because llvm can generate them.
Fix the test by adding a big-endian variant, which uses an offset to
access the least-significant byte of bpf_sysctl.file_pos.
This reveals the final problem: verifier rejects accesses to bpf_sysctl
fields with offset > 0. Such accesses are already allowed for a wide
range of structs: __sk_buff, bpf_sock_addr and sk_msg_md to name a few.
Extend this support to bpf_sysctl by using bpf_ctx_range instead of
offsetof when matching field offsets.
Fixes: 7b146cebe3 ("bpf: Sysctl hook")
Fixes: e1550bfe0d ("bpf: Add file_pos field to bpf_sysctl ctx")
Fixes: 9a1027e525 ("selftests/bpf: Test file_pos field in bpf_sysctl ctx")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191028122902.9763-1-iii@linux.ibm.com
While the static key is correctly initialized as being disabled, it will
remain forever enabled once turned on. This means that if we start with an
asymmetric system and hotplug out enough CPUs to end up with an SMP system,
the static key will remain set - which is obviously wrong. We should detect
this and turn off things like misfit migration and capacity aware wakeups.
As Quentin pointed out, having separate root domains makes this slightly
trickier. We could have exclusive cpusets that create an SMP island - IOW,
the domains within this root domain will not see any asymmetry. This means
we can't just disable the key on domain destruction, we need to count how
many asymmetric root domains we have.
Consider the following example using Juno r0 which is 2+4 big.LITTLE, where
two identical cpusets are created: they both span both big and LITTLE CPUs:
asym0 asym1
[ ][ ]
L L B L L B
$ cgcreate -g cpuset:asym0
$ cgset -r cpuset.cpus=0,1,3 asym0
$ cgset -r cpuset.mems=0 asym0
$ cgset -r cpuset.cpu_exclusive=1 asym0
$ cgcreate -g cpuset:asym1
$ cgset -r cpuset.cpus=2,4,5 asym1
$ cgset -r cpuset.mems=0 asym1
$ cgset -r cpuset.cpu_exclusive=1 asym1
$ cgset -r cpuset.sched_load_balance=0 .
(the CPU numbering may look odd because on the Juno LITTLEs are CPUs 0,3-5
and bigs are CPUs 1-2)
If we make one of those SMP (IOW remove asymmetry) by e.g. hotplugging its
big core, we would end up with an SMP cpuset and an asymmetric cpuset - the
static key must remain set, because we still have one asymmetric root domain.
With the above example, this could be done with:
$ echo 0 > /sys/devices/system/cpu/cpu2/online
Which would result in:
asym0 asym1
[ ][ ]
L L B L L
When both SMP and asymmetric cpusets are present, all CPUs will observe
sched_asym_cpucapacity being set (it is system-wide), but not all CPUs
observe asymmetry in their sched domain hierarchy:
per_cpu(sd_asym_cpucapacity, <any CPU in asym0>) == <some SD at DIE level>
per_cpu(sd_asym_cpucapacity, <any CPU in asym1>) == NULL
Change the simple key enablement to an increment, and decrement the key
counter when destroying domains that cover asymmetric CPUs.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Dietmar.Eggemann@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hannes@cmpxchg.org
Cc: lizefan@huawei.com
Cc: morten.rasmussen@arm.com
Cc: qperret@google.com
Cc: tj@kernel.org
Cc: vincent.guittot@linaro.org
Fixes: df054e8445 ("sched/topology: Add static_key for asymmetric CPU capacity optimizations")
Link: https://lkml.kernel.org/r/20191023153745.19515-3-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
1a59413124 ("perf: Add wakeup watermark control to the AUX area")
added attr.__reserved_2 padding, but forgot to add an ABI check to reject
attributes with this field set. Fix that.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: adrian.hunter@intel.com
Cc: mathieu.poirier@linaro.org
Link: https://lkml.kernel.org/r/20191025121636.75182-1-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull timer fixes from Thomas Gleixner:
"A small set of fixes for time(keeping):
- Add a missing include to prevent compiler warnings.
- Make the VDSO implementation of clock_getres() POSIX compliant
again. A recent change dropped the NULL pointer guard which is
required as NULL is a valid pointer value for this function.
- Fix two function documentation typos"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Fix two trivial comments
timers/sched_clock: Include local timekeeping.h for missing declarations
lib/vdso: Make clock_getres() POSIX compliant again
Pull perf fixes from Thomas Gleixner:
"A set of perf fixes:
kernel:
- Unbreak the tracking of auxiliary buffer allocations which got
imbalanced causing recource limit failures.
- Fix the fallout of splitting of ToPA entries which missed to shift
the base entry PA correctly.
- Use the correct context to lookup the AUX event when unmapping the
associated AUX buffer so the event can be stopped and the buffer
reference dropped.
tools:
- Fix buildiid-cache mode setting in copyfile_mode_ns() when copying
/proc/kcore
- Fix freeing id arrays in the event list so the correct event is
closed.
- Sync sched.h anc kvm.h headers with the kernel sources.
- Link jvmti against tools/lib/ctype.o to have weak strlcpy().
- Fix multiple memory and file descriptor leaks, found by coverity in
perf annotate.
- Fix leaks in error handling paths in 'perf c2c', 'perf kmem', found
by a static analysis tool"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/aux: Fix AUX output stopping
perf/aux: Fix tracking of auxiliary trace buffer allocation
perf/x86/intel/pt: Fix base for single entry topa
perf kmem: Fix memory leak in compact_gfp_flags()
tools headers UAPI: Sync sched.h with the kernel
tools headers kvm: Sync kvm.h headers with the kernel sources
tools headers kvm: Sync kvm headers with the kernel sources
tools headers kvm: Sync kvm headers with the kernel sources
perf c2c: Fix memory leak in build_cl_output()
perf tools: Fix mode setting in copyfile_mode_ns()
perf annotate: Fix multiple memory and file descriptor leaks
perf tools: Fix resource leak of closedir() on the error paths
perf evlist: Fix fix for freed id arrays
perf jvmti: Link against tools/lib/ctype.h to have weak strlcpy()
Daniel Borkmann says:
====================
pull-request: bpf 2019-10-27
The following pull-request contains BPF updates for your *net* tree.
We've added 7 non-merge commits during the last 11 day(s) which contain
a total of 7 files changed, 66 insertions(+), 16 deletions(-).
The main changes are:
1) Fix two use-after-free bugs in relation to RCU in jited symbol exposure to
kallsyms, from Daniel Borkmann.
2) Fix NULL pointer dereference in AF_XDP rx-only sockets, from Magnus Karlsson.
3) Fix hang in netdev unregister for hash based devmap as well as another overflow
bug on 32 bit archs in memlock cost calculation, from Toke Høiland-Jørgensen.
4) Fix wrong memory access in LWT BPF programs on reroute due to invalid dst.
Also fix BPF selftests to use more compatible nc options, from Jiri Benc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- Using device PM QoS of CPU devices for managing frequency limits
in cpufreq does not work, so introduce frequency QoS (based on the
original low-level PM QoS) for this purpose, switch cpufreq and
related code over to using it and fix a race involving deferred
updates of frequency limits on top of that (Rafael Wysocki, Sudeep
Holla).
- Avoid calling regulator_enable()/disable() from the OPP framework
to avoid side-effects on boot-enabled regulators that may change their
initial voltage due to performing initial voltage balancing without
all restrictions from the consumers (Marek Szyprowski).
- Avoid a kref management issue in the OPP library code and drop an
incorrectly added lockdep_assert_held() from it (Viresh Kumar).
- Make the recently added haltpoll cpuidle driver take the 'idle='
override into account as appropriate (Zhenzhong Duan).
-----BEGIN PGP SIGNATURE-----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=yitK
-----END PGP SIGNATURE-----
Merge tag 'pm-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix problems related to frequency limits management in cpufreq
that were introduced during the 5.3 cycle (when PM QoS had started to
be used for that), fix a few issues in the OPP (operating performance
points) library code and fix up the recently added haltpoll cpuidle
driver.
The cpufreq changes are somewhat bigger that I would like them to be
at this stage of the cycle, but the problems fixed by them include
crashes on boot and shutdown in some cases (among other things) and in
my view it is better to address the root of the issue right away.
Specifics:
- Using device PM QoS of CPU devices for managing frequency limits in
cpufreq does not work, so introduce frequency QoS (based on the
original low-level PM QoS) for this purpose, switch cpufreq and
related code over to using it and fix a race involving deferred
updates of frequency limits on top of that (Rafael Wysocki, Sudeep
Holla).
- Avoid calling regulator_enable()/disable() from the OPP framework
to avoid side-effects on boot-enabled regulators that may change
their initial voltage due to performing initial voltage balancing
without all restrictions from the consumers (Marek Szyprowski).
- Avoid a kref management issue in the OPP library code and drop an
incorrectly added lockdep_assert_held() from it (Viresh Kumar).
- Make the recently added haltpoll cpuidle driver take the 'idle='
override into account as appropriate (Zhenzhong Duan)"
* tag 'pm-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
opp: Reinitialize the list_kref before adding the static OPPs again
cpufreq: Cancel policy update work scheduled before freeing
cpuidle: haltpoll: Take 'idle=' override into account
opp: core: Revert "add regulators enable and disable"
PM: QoS: Drop frequency QoS types from device PM QoS
cpufreq: Use per-policy frequency QoS
PM: QoS: Introduce frequency QoS
opp: of: drop incorrect lockdep_assert_held()
- A race in perf trace initialization (missing mutexes)
- Minor fix to represent gfp_t in synthetic events as properly signed
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXa5C9hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrFqAP9FskyS8xr1iqquWGarC38jYaLg8C2c
7ou+tdIm+Rez5QEA+3E456Esusmx3dACk2QLeb788Pf1wQOjKXyZ9H+2eAE=
=ys+Y
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.4-rc3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two minor fixes:
- A race in perf trace initialization (missing mutexes)
- Minor fix to represent gfp_t in synthetic events as properly
signed"
* tag 'trace-v5.4-rc3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix race in perf_trace_buf initialization
tracing: Fix "gfp_t" format for synthetic events
Recent changes modified the function arguments of
thread_group_sample_cputime() and task_cputimers_expired(), but forgot to
update the comments. Fix it up.
[ tglx: Changed the argument name of task_cputimers_expired() as the pointer
points to an array of samples. ]
Fixes: b7be4ef136 ("posix-cpu-timers: Switch thread group sampling to array")
Fixes: 001f797143 ("posix-cpu-timers: Make expiry checks array based")
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1571643852-21848-1-git-send-email-wang.yi59@zte.com.cn
Include the timekeeping.h header to get the declaration of the
sched_clock_{suspend,resume} functions. Fixes the following sparse
warnings:
kernel/time/sched_clock.c:275:5: warning: symbol 'sched_clock_suspend' was not declared. Should it be static?
kernel/time/sched_clock.c:286:6: warning: symbol 'sched_clock_resume' was not declared. Should it be static?
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191022131226.11465-1-ben.dooks@codethink.co.uk
There is one more problematic case I noticed while recently fixing BPF kallsyms
handling in cd7455f101 ("bpf: Fix use after free in subprog's jited symbol
removal") and that is bpf_get_prog_name().
If BTF has been attached to the prog, then we may be able to fetch the function
signature type id in kallsyms through prog->aux->func_info[prog->aux->func_idx].type_id.
However, while the BTF object itself is torn down via RCU callback, the prog's
aux->func_info is immediately freed via kvfree(prog->aux->func_info) once the
prog's refcount either hit zero or when subprograms were already exposed via
kallsyms and we hit the error path added in 5482e9a93c ("bpf: Fix memleak in
aux->func_info and aux->btf").
This violates RCU as well since kallsyms could be walked in parallel where we
could access aux->func_info. Hence, defer kvfree() to after RCU grace period.
Looking at ba64e7d852 ("bpf: btf: support proper non-jit func info") there
is no reason/dependency where we couldn't defer the kvfree(aux->func_info) into
the RCU callback.
Fixes: 5482e9a93c ("bpf: Fix memleak in aux->func_info and aux->btf")
Fixes: ba64e7d852 ("bpf: btf: support proper non-jit func info")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/875f2906a7c1a0691f2d567b4d8e4ea2739b1e88.1571779205.git.daniel@iogearbox.net
syzkaller managed to trigger the following crash:
[...]
BUG: unable to handle page fault for address: ffffc90001923030
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD aa551067 P4D aa551067 PUD aa552067 PMD a572b067 PTE 80000000a1173163
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 7982 Comm: syz-executor912 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:bpf_jit_binary_hdr include/linux/filter.h:787 [inline]
RIP: 0010:bpf_get_prog_addr_region kernel/bpf/core.c:531 [inline]
RIP: 0010:bpf_tree_comp kernel/bpf/core.c:600 [inline]
RIP: 0010:__lt_find include/linux/rbtree_latch.h:115 [inline]
RIP: 0010:latch_tree_find include/linux/rbtree_latch.h:208 [inline]
RIP: 0010:bpf_prog_kallsyms_find kernel/bpf/core.c:674 [inline]
RIP: 0010:is_bpf_text_address+0x184/0x3b0 kernel/bpf/core.c:709
[...]
Call Trace:
kernel_text_address kernel/extable.c:147 [inline]
__kernel_text_address+0x9a/0x110 kernel/extable.c:102
unwind_get_return_address+0x4c/0x90 arch/x86/kernel/unwind_frame.c:19
arch_stack_walk+0x98/0xe0 arch/x86/kernel/stacktrace.c:26
stack_trace_save+0xb6/0x150 kernel/stacktrace.c:123
save_stack mm/kasan/common.c:69 [inline]
set_track mm/kasan/common.c:77 [inline]
__kasan_kmalloc+0x11c/0x1b0 mm/kasan/common.c:510
kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:518
slab_post_alloc_hook mm/slab.h:584 [inline]
slab_alloc mm/slab.c:3319 [inline]
kmem_cache_alloc+0x1f5/0x2e0 mm/slab.c:3483
getname_flags+0xba/0x640 fs/namei.c:138
getname+0x19/0x20 fs/namei.c:209
do_sys_open+0x261/0x560 fs/open.c:1091
__do_sys_open fs/open.c:1115 [inline]
__se_sys_open fs/open.c:1110 [inline]
__x64_sys_open+0x87/0x90 fs/open.c:1110
do_syscall_64+0xf7/0x1c0 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
[...]
After further debugging it turns out that we walk kallsyms while in parallel
we tear down a BPF program which contains subprograms that have been JITed
though the program itself has not been fully exposed and is eventually bailing
out with error.
The bpf_prog_kallsyms_del_subprogs() in bpf_prog_load()'s error path removes
the symbols, however, bpf_prog_free() tears down the JIT memory too early via
scheduled work. Instead, it needs to properly respect RCU grace period as the
kallsyms walk for BPF is under RCU.
Fix it by refactoring __bpf_prog_put()'s tear down and reuse it in our error
path where we defer final destruction when we have subprogs in the program.
Fixes: 7d1982b4e3 ("bpf: fix panic in prog load calls cleanup")
Fixes: 1c2a088a66 ("bpf: x64: add JIT support for multi-function programs")
Reported-by: syzbot+710043c5d1d5b5013bc7@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: syzbot+710043c5d1d5b5013bc7@syzkaller.appspotmail.com
Link: https://lore.kernel.org/bpf/55f6367324c2d7e9583fa9ccf5385dcbba0d7a6e.1571752452.git.daniel@iogearbox.net
Commit:
8a58ddae23 ("perf/core: Fix exclusive events' grouping")
allows CAP_EXCLUSIVE events to be grouped with other events. Since all
of those also happen to be AUX events (which is not the case the other
way around, because arch/s390), this changes the rules for stopping the
output: the AUX event may not be on its PMU's context any more, if it's
grouped with a HW event, in which case it will be on that HW event's
context instead. If that's the case, munmap() of the AUX buffer can't
find and stop the AUX event, potentially leaving the last reference with
the atomic context, which will then end up freeing the AUX buffer. This
will then trip warnings:
Fix this by using the context's PMU context when looking for events
to stop, instead of the event's PMU context.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20191022073940.61814-1-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It seems I forgot to add handling of devmap_hash type maps to the device
unregister hook for devmaps. This omission causes devices to not be
properly released, which causes hangs.
Fix this by adding the missing handler.
Fixes: 6f9d451ab1 ("xdp: Add devmap_hash map type for looking up devices by hashed index")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191019111931.2981954-1-toke@redhat.com
The following commit from the v5.4 merge window:
d44248a413 ("perf/core: Rework memory accounting in perf_mmap()")
... breaks auxiliary trace buffer tracking.
If I run command 'perf record -e rbd000' to record samples and saving
them in the **auxiliary** trace buffer then the value of 'locked_vm' becomes
negative after all trace buffers have been allocated and released:
During allocation the values increase:
[52.250027] perf_mmap user->locked_vm:0x87 pinned_vm:0x0 ret:0
[52.250115] perf_mmap user->locked_vm:0x107 pinned_vm:0x0 ret:0
[52.250251] perf_mmap user->locked_vm:0x188 pinned_vm:0x0 ret:0
[52.250326] perf_mmap user->locked_vm:0x208 pinned_vm:0x0 ret:0
[52.250441] perf_mmap user->locked_vm:0x289 pinned_vm:0x0 ret:0
[52.250498] perf_mmap user->locked_vm:0x309 pinned_vm:0x0 ret:0
[52.250613] perf_mmap user->locked_vm:0x38a pinned_vm:0x0 ret:0
[52.250715] perf_mmap user->locked_vm:0x408 pinned_vm:0x2 ret:0
[52.250834] perf_mmap user->locked_vm:0x408 pinned_vm:0x83 ret:0
[52.250915] perf_mmap user->locked_vm:0x408 pinned_vm:0x103 ret:0
[52.251061] perf_mmap user->locked_vm:0x408 pinned_vm:0x184 ret:0
[52.251146] perf_mmap user->locked_vm:0x408 pinned_vm:0x204 ret:0
[52.251299] perf_mmap user->locked_vm:0x408 pinned_vm:0x285 ret:0
[52.251383] perf_mmap user->locked_vm:0x408 pinned_vm:0x305 ret:0
[52.251544] perf_mmap user->locked_vm:0x408 pinned_vm:0x386 ret:0
[52.251634] perf_mmap user->locked_vm:0x408 pinned_vm:0x406 ret:0
[52.253018] perf_mmap user->locked_vm:0x408 pinned_vm:0x487 ret:0
[52.253197] perf_mmap user->locked_vm:0x408 pinned_vm:0x508 ret:0
[52.253374] perf_mmap user->locked_vm:0x408 pinned_vm:0x589 ret:0
[52.253550] perf_mmap user->locked_vm:0x408 pinned_vm:0x60a ret:0
[52.253726] perf_mmap user->locked_vm:0x408 pinned_vm:0x68b ret:0
[52.253903] perf_mmap user->locked_vm:0x408 pinned_vm:0x70c ret:0
[52.254084] perf_mmap user->locked_vm:0x408 pinned_vm:0x78d ret:0
[52.254263] perf_mmap user->locked_vm:0x408 pinned_vm:0x80e ret:0
The value of user->locked_vm increases to a limit then the memory
is tracked by pinned_vm.
During deallocation the size is subtracted from pinned_vm until
it hits a limit. Then a larger value is subtracted from locked_vm
leading to a large number (because of type unsigned):
[64.267797] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x78d
[64.267826] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x70c
[64.267848] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x68b
[64.267869] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x60a
[64.267891] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x589
[64.267911] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x508
[64.267933] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x487
[64.267952] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x406
[64.268883] perf_mmap_close mmap_user->locked_vm:0x307 pinned_vm:0x406
[64.269117] perf_mmap_close mmap_user->locked_vm:0x206 pinned_vm:0x406
[64.269433] perf_mmap_close mmap_user->locked_vm:0x105 pinned_vm:0x406
[64.269536] perf_mmap_close mmap_user->locked_vm:0x4 pinned_vm:0x404
[64.269797] perf_mmap_close mmap_user->locked_vm:0xffffffffffffff84 pinned_vm:0x303
[64.270105] perf_mmap_close mmap_user->locked_vm:0xffffffffffffff04 pinned_vm:0x202
[64.270374] perf_mmap_close mmap_user->locked_vm:0xfffffffffffffe84 pinned_vm:0x101
[64.270628] perf_mmap_close mmap_user->locked_vm:0xfffffffffffffe04 pinned_vm:0x0
This value sticks for the user until system is rebooted, causing
follow-on system calls using locked_vm resource limit to fail.
Note: There is no issue using the normal trace buffer.
In fact the issue is in perf_mmap_close(). During allocation auxiliary
trace buffer memory is either traced as 'extra' and added to 'pinned_vm'
or trace as 'user_extra' and added to 'locked_vm'. This applies for
normal trace buffers and auxiliary trace buffer.
However in function perf_mmap_close() all auxiliary trace buffer is
subtraced from 'locked_vm' and never from 'pinned_vm'. This breaks the
ballance.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: gor@linux.ibm.com
Cc: hechaol@fb.com
Cc: heiko.carstens@de.ibm.com
Cc: linux-perf-users@vger.kernel.org
Cc: songliubraving@fb.com
Fixes: d44248a413 ("perf/core: Rework memory accounting in perf_mmap()")
Link: https://lkml.kernel.org/r/20191021083354.67868-1-tmricht@linux.ibm.com
[ Minor readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Introduce frequency QoS, based on the "raw" low-level PM QoS, to
represent min and max frequency requests and aggregate constraints.
The min and max frequency requests are to be represented by
struct freq_qos_request objects and the aggregate constraints are to
be represented by struct freq_constraints objects. The latter are
expected to be initialized with the help of freq_constraints_init().
The freq_qos_read_value() helper is defined to retrieve the aggregate
constraints values from a given struct freq_constraints object and
there are the freq_qos_add_request(), freq_qos_update_request() and
freq_qos_remove_request() helpers to manipulate the min and max
frequency requests. It is assumed that the the helpers will not
run concurrently with each other for the same struct freq_qos_request
object, so if that may be the case, their uses must ensure proper
synchronization between them (e.g. through locking).
In addition, freq_qos_add_notifier() and freq_qos_remove_notifier()
are provided to add and remove notifiers that will trigger on aggregate
constraint changes to and from a given struct freq_constraints object,
respectively.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
- fix a bashism of setlocalversion
- do not use the too new --sort option of tar
-----BEGIN PGP SIGNATURE-----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=KNWF
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild fixes from Masahiro Yamada:
- fix a bashism of setlocalversion
- do not use the too new --sort option of tar
* tag 'kbuild-fixes-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kheaders: substituting --sort in archive creation
scripts: setlocalversion: fix a bashism
kbuild: update comment about KBUILD_ALLDIRS
Pull hrtimer fixlet from Thomas Gleixner:
"A single commit annotating the lockcless access to timer->base with
READ_ONCE() and adding the WRITE_ONCE() counterparts for completeness"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Annotate lockless access to timer->base
Pull stop-machine fix from Thomas Gleixner:
"A single fix, amending stop machine with WRITE/READ_ONCE() to address
the fallout of KCSAN"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
stop_machine: Avoid potential race behaviour
Attaching uprobe to text section in THP splits the PMD mapped page table
into PTE mapped entries. On uprobe detach, we would like to regroup PMD
mapped page table entry to regain performance benefit of THP.
However, the regroup is broken For perf_event based trace_uprobe. This
is because perf_event based trace_uprobe calls uprobe_unregister twice
on close: first in TRACE_REG_PERF_CLOSE, then in
TRACE_REG_PERF_UNREGISTER. The second call will split the PMD mapped
page table entry, which is not the desired behavior.
Fix this by only use FOLL_SPLIT_PMD for uprobe register case.
Add a WARN() to confirm uprobe unregister never work on huge pages, and
abort the operation when this WARN() triggers.
Link: http://lkml.kernel.org/r/20191017164223.2762148-6-songliubraving@fb.com
Fixes: 5a52c9df62 ("uprobe: use FOLL_SPLIT_PMD instead of FOLL_SPLIT")
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tetsuo pointed out that without an explicit cast, the cost calculation for
devmap_hash type maps could overflow on 32-bit builds. This adds the
missing cast.
Fixes: 6f9d451ab1 ("xdp: Add devmap_hash map type for looking up devices by hashed index")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191017105702.2807093-1-toke@redhat.com
In the format of synthetic events, the "gfp_t" is shown as "signed:1",
but in fact the "gfp_t" is "unsigned", should be shown as "signed:0".
The issue can be reproduced by the following commands:
echo 'memlatency u64 lat; unsigned int order; gfp_t gfp_flags; int migratetype' > /sys/kernel/debug/tracing/synthetic_events
cat /sys/kernel/debug/tracing/events/synthetic/memlatency/format
name: memlatency
ID: 2233
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:u64 lat; offset:8; size:8; signed:0;
field:unsigned int order; offset:16; size:4; signed:0;
field:gfp_t gfp_flags; offset:24; size:4; signed:1;
field:int migratetype; offset:32; size:4; signed:1;
print fmt: "lat=%llu, order=%u, gfp_flags=%x, migratetype=%d", REC->lat, REC->order, REC->gfp_flags, REC->migratetype
Link: http://lkml.kernel.org/r/20191018012034.6404-1-zhengjun.xing@linux.intel.com
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Fix possible NULL pointer dereference in the ACPI processor
scaling initialization code introduced by a recent cpufreq
update (Rafael Wysocki).
- Fix possible deadlock due to suspending cpufreq too late during
system shutdown (Rafael Wysocki).
- Make the PCI device system resume code path be more consistent
with its PM-runtime counterpart to fix an issue with missing
delay on transitions from D3cold to D0 during system resume from
suspend-to-idle on some systems (Rafael Wysocki).
- Drop Dell XPS13 9360 from the LPS0 Idle _DSM blacklist to make it
use suspend-to-idle by default (Mario Limonciello).
- Fix build warning in the core system suspend support code (Ben
Dooks).
-----BEGIN PGP SIGNATURE-----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=67IL
-----END PGP SIGNATURE-----
Merge tag 'pm-5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These include a fix for a recent regression in the ACPI CPU
performance scaling code, a PCI device power management fix,
a system shutdown fix related to cpufreq, a removal of an ACPI
suspend-to-idle blacklist entry and a build warning fix.
Specifics:
- Fix possible NULL pointer dereference in the ACPI processor scaling
initialization code introduced by a recent cpufreq update (Rafael
Wysocki).
- Fix possible deadlock due to suspending cpufreq too late during
system shutdown (Rafael Wysocki).
- Make the PCI device system resume code path be more consistent with
its PM-runtime counterpart to fix an issue with missing delay on
transitions from D3cold to D0 during system resume from
suspend-to-idle on some systems (Rafael Wysocki).
- Drop Dell XPS13 9360 from the LPS0 Idle _DSM blacklist to make it
use suspend-to-idle by default (Mario Limonciello).
- Fix build warning in the core system suspend support code (Ben
Dooks)"
* tag 'pm-5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Avoid NULL pointer dereferences at init time
PCI: PM: Fix pci_power_up()
PM: sleep: include <linux/pm_runtime.h> for pm_wq
cpufreq: Avoid cpufreq_suspend() deadlock on system shutdown
ACPI: PM: Drop Dell XPS13 9360 from LPS0 Idle _DSM blacklist
* pm-cpufreq:
ACPI: processor: Avoid NULL pointer dereferences at init time
cpufreq: Avoid cpufreq_suspend() deadlock on system shutdown
* pm-sleep:
PM: sleep: include <linux/pm_runtime.h> for pm_wq
ACPI: PM: Drop Dell XPS13 9360 from LPS0 Idle _DSM blacklist
Both multi_cpu_stop() and set_state() access multi_stop_data::state
racily using plain accesses. These are subject to compiler
transformations which could break the intended behaviour of the code,
and this situation is detected by KCSAN on both arm64 and x86 (splats
below).
Improve matters by using READ_ONCE() and WRITE_ONCE() to ensure that the
compiler cannot elide, replay, or tear loads and stores.
In multi_cpu_stop() the two loads of multi_stop_data::state are expected to
be a consistent value, so snapshot the value into a temporary variable to
ensure this.
The state transitions are serialized by atomic manipulation of
multi_stop_data::num_threads, and other fields in multi_stop_data are not
modified while subject to concurrent reads.
KCSAN splat on arm64:
| BUG: KCSAN: data-race in multi_cpu_stop+0xa8/0x198 and set_state+0x80/0xb0
|
| write to 0xffff00001003bd00 of 4 bytes by task 24 on cpu 3:
| set_state+0x80/0xb0
| multi_cpu_stop+0x16c/0x198
| cpu_stopper_thread+0x170/0x298
| smpboot_thread_fn+0x40c/0x560
| kthread+0x1a8/0x1b0
| ret_from_fork+0x10/0x18
|
| read to 0xffff00001003bd00 of 4 bytes by task 14 on cpu 1:
| multi_cpu_stop+0xa8/0x198
| cpu_stopper_thread+0x170/0x298
| smpboot_thread_fn+0x40c/0x560
| kthread+0x1a8/0x1b0
| ret_from_fork+0x10/0x18
|
| Reported by Kernel Concurrency Sanitizer on:
| CPU: 1 PID: 14 Comm: migration/1 Not tainted 5.3.0-00007-g67ab35a199f4-dirty #3
| Hardware name: linux,dummy-virt (DT)
KCSAN splat on x86:
| write to 0xffffb0bac0013e18 of 4 bytes by task 19 on cpu 2:
| set_state kernel/stop_machine.c:170 [inline]
| ack_state kernel/stop_machine.c:177 [inline]
| multi_cpu_stop+0x1a4/0x220 kernel/stop_machine.c:227
| cpu_stopper_thread+0x19e/0x280 kernel/stop_machine.c:516
| smpboot_thread_fn+0x1a8/0x300 kernel/smpboot.c:165
| kthread+0x1b5/0x200 kernel/kthread.c:255
| ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:352
|
| read to 0xffffb0bac0013e18 of 4 bytes by task 44 on cpu 7:
| multi_cpu_stop+0xb4/0x220 kernel/stop_machine.c:213
| cpu_stopper_thread+0x19e/0x280 kernel/stop_machine.c:516
| smpboot_thread_fn+0x1a8/0x300 kernel/smpboot.c:165
| kthread+0x1b5/0x200 kernel/kthread.c:255
| ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:352
|
| Reported by Kernel Concurrency Sanitizer on:
| CPU: 7 PID: 44 Comm: migration/7 Not tainted 5.3.0+ #1
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20191007104536.27276-1-mark.rutland@arm.com
The option --sort=ORDER was only introduced in tar 1.28 (2014), which
is rather new and might not be available in some setups.
This patch tries to replicate the previous behaviour as closely as
possible to fix the kheaders build for older environments. It does
not produce identical archives compared to the previous version due
to minor sorting differences but produces reproducible results itself
in my tests.
Reported-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Dmitry Goldin <dgoldin+lkml@protonmail.ch>
Tested-by: Andreas Schwab <schwab@suse.de>
Tested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The __kthread_queue_delayed_work is not exported so
make it static, to avoid the following sparse warning:
kernel/kthread.c:869:6: warning: symbol '__kthread_queue_delayed_work' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull parisc fixes from Helge Deller:
- Fix a parisc-specific fallout of Christoph's
dma_set_mask_and_coherent() patches (Sven)
- Fix a vmap memory leak in ioremap()/ioremap() (Helge)
- Some minor cleanups and documentation updates (Nick, Helge)
* 'parisc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Remove 32-bit DMA enforcement from sba_iommu
parisc: Fix vmap memory leak in ioremap()/iounmap()
parisc: prefer __section from compiler_attributes.h
parisc: sysctl.c: Use CONFIG_PARISC instead of __hppa_ define
MAINTAINERS: Add hp_sdc drivers to parisc arch
