Add XMM register information from PEBS data in the Intel PT trace to the
synthesized PEBS sample.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190610072803.10456-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add general purpose register information from PEBS data in the Intel PT
trace to the synthesized PEBS sample.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190610072803.10456-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Synthesize a PEBS sample using basic information (ip, timestamp) only.
Other PEBS information will be added in later patches.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190610072803.10456-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out common sample preparation for re-use when synthesizing PEBS
samples.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190610072803.10456-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add infrastructure to prepare for synthesizing PEBS samples but leave
the actual synthesis to later patches.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190610072803.10456-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PEBS data is encoded in Block Item Packets (BIP). Populate a new structure
intel_pt_blk_items with the values and, upon a Block End Packet (BEP),
report them as a new Intel PT sample type INTEL_PT_BLK_ITEMS.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190610072803.10456-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add 3 new packets to supports PEBS via PT, namely Block Begin Packet
(BBP), Block Item Packet (BIP) and Block End Packet (BEP). PEBS data is
encoded into multiple BIP packets that come between BBP and BEP. The BEP
packet might be associated with a FUP packet. That is indicated by using
a separate packet type (INTEL_PT_BEP_IP) similar to other packets types
with the _IP suffix.
Refer to the Intel SDM for more information about PEBS via PT:
https://software.intel.com/en-us/articles/intel-sdm
May 2019 version: Vol. 3B 18.5.5.2 PEBS output to Intel® Processor Trace
Decoding of BIP packets conflicts with single-byte TNT packets. Since
BIP packets only occur in the context of a block (i.e. between BBP and
BEP), that context must be recorded and passed to the packet decoder.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190610072803.10456-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Call function cs_etm_set_option() once with all relevant options set
rather than multiple times to avoid going through the list of CPU more
than once.
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190611204528.20093-1-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to subsequently add more tests for the arm64 architecture we
compile the tests target for arm64 systematically.
Further explanation provided by Mark Rutland:
Given prior questions regarding this commit, it's probably worth
spelling things out more explicitly, e.g.
Currently we only build the arm64/tests directory if
CONFIG_DWARF_UNWIND is selected, which is fine as the only test we
have is arm64/tests/dwarf-unwind.o.
So that we can add more tests to the test directory, let's
unconditionally build the directory, but conditionally build
dwarf-unwind.o depending on CONFIG_DWARF_UNWIND.
There should be no functional change as a result of this patch.
Signed-off-by: Raphael Gault <raphael.gault@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190611125315.18736-2-raphael.gault@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf record:
Alexey Budankov:
- Allow mixing --user-regs with --call-graph=dwarf, making sure that
the minimal set of registers for DWARF unwinding is present in the
set of user registers requested to be present in each sample, while
warning the user that this may make callchains unreliable if more
that the minimal set of registers is needed to unwind.
yuzhoujian:
- Add support to collect callchains from kernel or user space only,
IOW allow setting the perf_event_attr.exclude_callchain_{kernel,user}
bits from the command line.
perf trace:
Arnaldo Carvalho de Melo:
- Remove x86_64 specific syscall numbers from the augmented_raw_syscalls
BPF in-kernel collector of augmented raw_syscalls:sys_{enter,exit}
payloads, use instead the syscall numbers obtainer either by the
arch specific syscalltbl generators or from audit-libs.
- Allow 'perf trace' to ask for the number of bytes to collect for
string arguments, for now ask for PATH_MAX, i.e. the whole
pathnames, which ends up being just a way to speficy which syscall
args are pathnames and thus should be read using bpf_probe_read_str().
- Skip unknown syscalls when expanding strace like syscall groups.
This helps using the 'string' group of syscalls to work in arm64,
where some of the syscalls present in x86_64 that deal with
strings, for instance 'access', are deprecated and this should not
be asked for tracing.
Leo Yan:
- Exit when failing to build eBPF program.
perf config:
Arnaldo Carvalho de Melo:
- Bail out when a handler returns failure for a key-value pair. This
helps with cases where processing a key-value pair is not just a
matter of setting some tool specific knob, involving, for instance
building a BPF program to then attach to the list of events 'perf
trace' will use, e.g. augmented_raw_syscalls.c.
perf.data:
Kan Liang:
- Read and store die ID information available in new Intel processors
in CPUID.1F in the CPU topology written in the perf.data header.
perf stat:
Kan Liang:
- Support per-die aggregation.
Documentation:
Arnaldo Carvalho de Melo:
- Update perf.data documentation about the CPU_TOPOLOGY, MEM_TOPOLOGY,
CLOCKID and DIR_FORMAT headers.
Song Liu:
- Add description of headers HEADER_BPF_PROG_INFO and HEADER_BPF_BTF.
Leo Yan:
- Update default value for llvm.clang-bpf-cmd-template in 'man perf-config'.
JVMTI:
Jiri Olsa:
- Address gcc string overflow warning for strncpy()
core:
- Remove superfluous nthreads system_wide setup in perf_evsel__alloc_fd().
Intel PT:
Adrian Hunter:
- Add support for samples to contain IPC ratio, collecting cycles
information from CYC packets, showing the IPC info periodically, because
Intel PT does not update the cycle count on every branch or instruction,
the incremental values will often be zero. When there are values, they
will be the number of instructions and number of cycles since the last
update, and thus represent the average IPC since the last IPC value.
E.g.:
# perf record --cpu 1 -m200000 -a -e intel_pt/cyc/u sleep 0.0001
rounding mmap pages size to 1024M (262144 pages)
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 2.208 MB perf.data ]
# perf script --insn-trace --xed -F+ipc,-dso,-cpu,-tid
#
<SNIP + add line numbering to make sense of IPC counts e.g.: (18/3)>
1 cc1 63501.650479626: 7f5219ac27bf _int_free+0x3f jnz 0x7f5219ac2af0 IPC: 0.81 (36/44)
2 cc1 63501.650479626: 7f5219ac27c5 _int_free+0x45 cmp $0x1f, %rbp
3 cc1 63501.650479626: 7f5219ac27c9 _int_free+0x49 jbe 0x7f5219ac2b00
4 cc1 63501.650479626: 7f5219ac27cf _int_free+0x4f test $0x8, %al
5 cc1 63501.650479626: 7f5219ac27d1 _int_free+0x51 jnz 0x7f5219ac2b00
6 cc1 63501.650479626: 7f5219ac27d7 _int_free+0x57 movq 0x13c58a(%rip), %rcx
7 cc1 63501.650479626: 7f5219ac27de _int_free+0x5e mov %rdi, %r12
8 cc1 63501.650479626: 7f5219ac27e1 _int_free+0x61 movq %fs:(%rcx), %rax
9 cc1 63501.650479626: 7f5219ac27e5 _int_free+0x65 test %rax, %rax
10 cc1 63501.650479626: 7f5219ac27e8 _int_free+0x68 jz 0x7f5219ac2821
11 cc1 63501.650479626: 7f5219ac27ea _int_free+0x6a leaq -0x11(%rbp), %rdi
12 cc1 63501.650479626: 7f5219ac27ee _int_free+0x6e mov %rdi, %rsi
13 cc1 63501.650479626: 7f5219ac27f1 _int_free+0x71 shr $0x4, %rsi
14 cc1 63501.650479626: 7f5219ac27f5 _int_free+0x75 cmpq %rsi, 0x13caf4(%rip)
15 cc1 63501.650479626: 7f5219ac27fc _int_free+0x7c jbe 0x7f5219ac2821
16 cc1 63501.650479626: 7f5219ac2821 _int_free+0xa1 cmpq 0x13f138(%rip), %rbp
17 cc1 63501.650479626: 7f5219ac2828 _int_free+0xa8 jnbe 0x7f5219ac28d8
18 cc1 63501.650479626: 7f5219ac28d8 _int_free+0x158 testb $0x2, 0x8(%rbx)
19 cc1 63501.650479628: 7f5219ac28dc _int_free+0x15c jnz 0x7f5219ac2ab0 IPC: 6.00 (18/3)
<SNIP>
- Allow using time ranges with Intel PT, i.e. these features, already
present but not optimially usable with Intel PT, should be now:
Select the second 10% time slice:
$ perf script --time 10%/2
Select from 0% to 10% time slice:
$ perf script --time 0%-10%
Select the first and second 10% time slices:
$ perf script --time 10%/1,10%/2
Select from 0% to 10% and 30% to 40% slices:
$ perf script --time 0%-10%,30%-40%
cs-etm (ARM):
Mathieu Poirier:
- Add support for CPU-wide trace scenarios.
s390:
Thomas Richter:
- Fix missing kvm module load for s390.
- Fix OOM error in TUI mode on s390
- Support s390 diag event display when doing analysis on !s390
architectures.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXP/1xQAKCRCyPKLppCJ+
J9xcAQCwOITAshE7op7HbKUPtkqiMNu+hpNa3skhxEpGHvKO0AEArpBXtuvEP8EU
PZsp+8vcVrlZ+dZutttgvkRz25mScg8=
=kfFb
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.3-20190611' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf record:
Alexey Budankov:
- Allow mixing --user-regs with --call-graph=dwarf, making sure that
the minimal set of registers for DWARF unwinding is present in the
set of user registers requested to be present in each sample, while
warning the user that this may make callchains unreliable if more
that the minimal set of registers is needed to unwind.
yuzhoujian:
- Add support to collect callchains from kernel or user space only,
IOW allow setting the perf_event_attr.exclude_callchain_{kernel,user}
bits from the command line.
perf trace:
Arnaldo Carvalho de Melo:
- Remove x86_64 specific syscall numbers from the augmented_raw_syscalls
BPF in-kernel collector of augmented raw_syscalls:sys_{enter,exit}
payloads, use instead the syscall numbers obtainer either by the
arch specific syscalltbl generators or from audit-libs.
- Allow 'perf trace' to ask for the number of bytes to collect for
string arguments, for now ask for PATH_MAX, i.e. the whole
pathnames, which ends up being just a way to speficy which syscall
args are pathnames and thus should be read using bpf_probe_read_str().
- Skip unknown syscalls when expanding strace like syscall groups.
This helps using the 'string' group of syscalls to work in arm64,
where some of the syscalls present in x86_64 that deal with
strings, for instance 'access', are deprecated and this should not
be asked for tracing.
Leo Yan:
- Exit when failing to build eBPF program.
perf config:
Arnaldo Carvalho de Melo:
- Bail out when a handler returns failure for a key-value pair. This
helps with cases where processing a key-value pair is not just a
matter of setting some tool specific knob, involving, for instance
building a BPF program to then attach to the list of events 'perf
trace' will use, e.g. augmented_raw_syscalls.c.
perf.data:
Kan Liang:
- Read and store die ID information available in new Intel processors
in CPUID.1F in the CPU topology written in the perf.data header.
perf stat:
Kan Liang:
- Support per-die aggregation.
Documentation:
Arnaldo Carvalho de Melo:
- Update perf.data documentation about the CPU_TOPOLOGY, MEM_TOPOLOGY,
CLOCKID and DIR_FORMAT headers.
Song Liu:
- Add description of headers HEADER_BPF_PROG_INFO and HEADER_BPF_BTF.
Leo Yan:
- Update default value for llvm.clang-bpf-cmd-template in 'man perf-config'.
JVMTI:
Jiri Olsa:
- Address gcc string overflow warning for strncpy()
core:
- Remove superfluous nthreads system_wide setup in perf_evsel__alloc_fd().
Intel PT:
Adrian Hunter:
- Add support for samples to contain IPC ratio, collecting cycles
information from CYC packets, showing the IPC info periodically, because
Intel PT does not update the cycle count on every branch or instruction,
the incremental values will often be zero. When there are values, they
will be the number of instructions and number of cycles since the last
update, and thus represent the average IPC since the last IPC value.
E.g.:
# perf record --cpu 1 -m200000 -a -e intel_pt/cyc/u sleep 0.0001
rounding mmap pages size to 1024M (262144 pages)
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 2.208 MB perf.data ]
# perf script --insn-trace --xed -F+ipc,-dso,-cpu,-tid
#
<SNIP + add line numbering to make sense of IPC counts e.g.: (18/3)>
1 cc1 63501.650479626: 7f5219ac27bf _int_free+0x3f jnz 0x7f5219ac2af0 IPC: 0.81 (36/44)
2 cc1 63501.650479626: 7f5219ac27c5 _int_free+0x45 cmp $0x1f, %rbp
3 cc1 63501.650479626: 7f5219ac27c9 _int_free+0x49 jbe 0x7f5219ac2b00
4 cc1 63501.650479626: 7f5219ac27cf _int_free+0x4f test $0x8, %al
5 cc1 63501.650479626: 7f5219ac27d1 _int_free+0x51 jnz 0x7f5219ac2b00
6 cc1 63501.650479626: 7f5219ac27d7 _int_free+0x57 movq 0x13c58a(%rip), %rcx
7 cc1 63501.650479626: 7f5219ac27de _int_free+0x5e mov %rdi, %r12
8 cc1 63501.650479626: 7f5219ac27e1 _int_free+0x61 movq %fs:(%rcx), %rax
9 cc1 63501.650479626: 7f5219ac27e5 _int_free+0x65 test %rax, %rax
10 cc1 63501.650479626: 7f5219ac27e8 _int_free+0x68 jz 0x7f5219ac2821
11 cc1 63501.650479626: 7f5219ac27ea _int_free+0x6a leaq -0x11(%rbp), %rdi
12 cc1 63501.650479626: 7f5219ac27ee _int_free+0x6e mov %rdi, %rsi
13 cc1 63501.650479626: 7f5219ac27f1 _int_free+0x71 shr $0x4, %rsi
14 cc1 63501.650479626: 7f5219ac27f5 _int_free+0x75 cmpq %rsi, 0x13caf4(%rip)
15 cc1 63501.650479626: 7f5219ac27fc _int_free+0x7c jbe 0x7f5219ac2821
16 cc1 63501.650479626: 7f5219ac2821 _int_free+0xa1 cmpq 0x13f138(%rip), %rbp
17 cc1 63501.650479626: 7f5219ac2828 _int_free+0xa8 jnbe 0x7f5219ac28d8
18 cc1 63501.650479626: 7f5219ac28d8 _int_free+0x158 testb $0x2, 0x8(%rbx)
19 cc1 63501.650479628: 7f5219ac28dc _int_free+0x15c jnz 0x7f5219ac2ab0 IPC: 6.00 (18/3)
<SNIP>
- Allow using time ranges with Intel PT, i.e. these features, already
present but not optimially usable with Intel PT, should be now:
Select the second 10% time slice:
$ perf script --time 10%/2
Select from 0% to 10% time slice:
$ perf script --time 0%-10%
Select the first and second 10% time slices:
$ perf script --time 10%/1,10%/2
Select from 0% to 10% and 30% to 40% slices:
$ perf script --time 0%-10%,30%-40%
cs-etm (ARM):
Mathieu Poirier:
- Add support for CPU-wide trace scenarios.
s390:
Thomas Richter:
- Fix missing kvm module load for s390.
- Fix OOM error in TUI mode on s390
- Support s390 diag event display when doing analysis on !s390
architectures.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We have $INSTALL_DIR/share/perf-core/strace/groups/string files with
syscalls that should be selected when 'string' is used, meaning, in this
case, syscalls that receive as one of its arguments a string, like a
pathname.
But those were first selected and tested on x86_64, and end up failing
in architectures where some of those syscalls are not available, like
the 'access' syscall on arm64, which makes using 'perf trace -e string'
in such archs to fail.
Since this the routine doing the validation is used only when reading
such files, do not fail when some syscall is not found in the
syscalltbl, instead just use pr_debug() to register that in case people
are suspicious of problems.
Now using 'perf trace -e string' should work on arm64, selecting only
the syscalls that have a string and are available on that architecture.
Reported-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/r/20190610184754.GU21245@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf report fails to display s390 specific event numbered bd000
on an x86 platform. For example on s390 this works without error:
[root@m35lp76 perf]# uname -m
s390x
[root@m35lp76 perf]# ./perf record -e rbd000 -- find / >/dev/null
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.549 MB perf.data ]
[root@m35lp76 perf]# ./perf report -D --stdio > /dev/null
[root@m35lp76 perf]#
Transfering this perf.data file to an x86 platform and executing
the same report command produces:
[root@f29 perf]# uname -m
x86_64
[root@f29 perf]# ./perf report -i ~/perf.data.m35lp76 --stdio
interpreting bpf_prog_info from systems with endianity is not yet supported
interpreting btf from systems with endianity is not yet supported
0x8c890 [0x8]: failed to process type: 68
Error:
failed to process sample
Event bd000 generates auxiliary data which is stored in big endian
format in the perf data file.
This error is caused by missing endianess handling on the x86 platform
when the data is displayed. Fix this by handling s390 auxiliary event
data depending on the local platform endianness.
Output after on x86:
[root@f29 perf]# ./perf report -D -i ~/perf.data.m35lp76 --stdio > /dev/null
interpreting bpf_prog_info from systems with endianity is not yet supported
interpreting btf from systems with endianity is not yet supported
[root@f29 perf]#
Committer notes:
Fix build breakage on older systems, such as CentOS:6 where using
nesting calls to the endian.h macros end up redefining local variables:
util/s390-cpumsf.c: In function 's390_cpumsf_trailer_show':
util/s390-cpumsf.c:333: error: declaration of '__v' shadows a previous local
util/s390-cpumsf.c:333: error: shadowed declaration is here
util/s390-cpumsf.c:333: error: declaration of '__x' shadows a previous local
util/s390-cpumsf.c:333: error: shadowed declaration is here
util/s390-cpumsf.c:334: error: declaration of '__v' shadows a previous local
util/s390-cpumsf.c:334: error: shadowed declaration is here
util/s390-cpumsf.c:334: error: declaration of '__x' shadows a previous local
util/s390-cpumsf.c:334: error: shadowed declaration is here
[perfbuilder@455a63ef60dc perf]$ gcc -v |& tail -1
gcc version 4.4.7 20120313 (Red Hat 4.4.7-23) (GCC)
[perfbuilder@455a63ef60dc perf]$
Since there are several uses of
be64toh(te->flags)
Introduce a variable to hold that and then use it, avoiding this case
that causes the above problems:
- local.bsdes = be16toh((be64toh(te->flags) >> 16 & 0xffff));
+ local.bsdes = be16toh((flags >> 16 & 0xffff));
Its the same construct used in s390_cpumsf_diag_show() where we have a
'word' variable that is used just once, s390_cpumsf_basic_show() has
lots of uses and also uses a variable to hold the result of be16toh().
Some of those temp variables needed to be converted from 'unsigned long'
to 'unsigned long long' so as to build on 32-bit arches such as
debian:experimental-x-mipsel, the android NDK ones and
fedora:24-x-ARC-uClibc.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20190522064325.25596-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Debugging a OOM error using the TUI interface revealed this issue
on s390:
[tmricht@m83lp54 perf]$ cat /proc/kallsyms |sort
....
00000001119b7158 B radix_tree_node_cachep
00000001119b8000 B __bss_stop
00000001119b8000 B _end
000003ff80002850 t autofs_mount [autofs4]
000003ff80002868 t autofs_show_options [autofs4]
000003ff80002a98 t autofs_evict_inode [autofs4]
....
There is a huge gap between the last kernel symbol
__bss_stop/_end and the first kernel module symbol
autofs_mount (from autofs4 module).
After reading the kernel symbol table via functions:
dso__load()
+--> dso__load_kernel_sym()
+--> dso__load_kallsyms()
+--> __dso_load_kallsyms()
+--> symbols__fixup_end()
the symbol __bss_stop has a start address of 1119b8000 and
an end address of 3ff80002850, as can be seen by this debug statement:
symbols__fixup_end __bss_stop start:0x1119b8000 end:0x3ff80002850
The size of symbol __bss_stop is 0x3fe6e64a850 bytes!
It is the last kernel symbol and fills up the space until
the first kernel module symbol.
This size kills the TUI interface when executing the following
code:
process_sample_event()
hist_entry_iter__add()
hist_iter__report_callback()
hist_entry__inc_addr_samples()
symbol__inc_addr_samples(symbol = __bss_stop)
symbol__cycles_hist()
annotated_source__alloc_histograms(...,
symbol__size(sym),
...)
This function allocates memory to save sample histograms.
The symbol_size() marco is defined as sym->end - sym->start, which
results in above value of 0x3fe6e64a850 bytes and
the call to calloc() in annotated_source__alloc_histograms() fails.
The histgram memory allocation might fail, make this failure
no-fatal and continue processing.
Output before:
[tmricht@m83lp54 perf]$ ./perf --debug stderr=1 report -vvvvv \
-i ~/slow.data 2>/tmp/2
[tmricht@m83lp54 perf]$ tail -5 /tmp/2
__symbol__inc_addr_samples(875): ENOMEM! sym->name=__bss_stop,
start=0x1119b8000, addr=0x2aa0005eb08, end=0x3ff80002850,
func: 0
problem adding hist entry, skipping event
0x938b8 [0x8]: failed to process type: 68 [Cannot allocate memory]
[tmricht@m83lp54 perf]$
Output after:
[tmricht@m83lp54 perf]$ ./perf --debug stderr=1 report -vvvvv \
-i ~/slow.data 2>/tmp/2
[tmricht@m83lp54 perf]$ tail -5 /tmp/2
symbol__inc_addr_samples map:0x1597830 start:0x110730000 end:0x3ff80002850
symbol__hists notes->src:0x2aa2a70 nr_hists:1
symbol__inc_addr_samples sym:unlink_anon_vmas src:0x2aa2a70
__symbol__inc_addr_samples: addr=0x11094c69e
0x11094c670 unlink_anon_vmas: period++ [addr: 0x11094c69e, 0x2e, evidx=0]
=> nr_samples: 1, period: 526008
[tmricht@m83lp54 perf]$
There is no error about failed memory allocation and the TUI interface
shows all entries.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/90cb5607-3e12-5167-682d-978eba7dafa8@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Command
# perf test -Fv 6
fails with error
running test 100 'kvm-s390:kvm_s390_create_vm' failed to parse
event 'kvm-s390:kvm_s390_create_vm', err -1, str 'unknown tracepoint'
event syntax error: 'kvm-s390:kvm_s390_create_vm'
\___ unknown tracepoint
when the kvm module is not loaded or not built in.
Fix this by adding a valid function which tests if the module
is loaded. Loaded modules (or builtin KVM support) have a
directory named
/sys/kernel/debug/tracing/events/kvm-s390
for this tracepoint.
Check for existence of this directory.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190604053504.43073-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently only a single explicit time range is accepted. Add support for
multiple ranges separated by spaces, which requires the string to be
quoted. Update the time utils test accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-20-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test time ranges work as expected.
Committer testing:
$ perf test "time utils"
59: time utils : Ok
$ perf test -v "time utils"
59: time utils :
--- start ---
test child forked, pid 31711
parse_nsec_time("0")
0
parse_nsec_time("1")
1000000000
parse_nsec_time("0.000000001")
1
parse_nsec_time("1.000000001")
1000000001
parse_nsec_time("123456.123456")
123456123456000
parse_nsec_time("1234567.123456789")
1234567123456789
parse_nsec_time("18446744073.709551615")
18446744073709551615
perf_time__parse_str("1234567.123456789,1234567.123456789")
start time 1234567123456789, end time 1234567123456789
perf_time__parse_str("1234567.123456789,1234567.123456790")
start time 1234567123456789, end time 1234567123456790
perf_time__parse_str("1234567.123456789,")
start time 1234567123456789, end time 0
perf_time__parse_str(",1234567.123456789")
start time 0, end time 1234567123456789
perf_time__parse_str("0,1234567.123456789")
start time 0, end time 1234567123456789
perf_time__parse_for_ranges("1234567.123456789,1234567.123456790")
start time 1234567123456789, end time 1234567123456790
perf_time__parse_for_ranges("10%/1")
first_sample_time 7654321000000000 last_sample_time 7654321000000100
start time 0: 7654321000000000, end time 0: 7654321000000009
perf_time__parse_for_ranges("10%/2")
first_sample_time 7654321000000000 last_sample_time 7654321000000100
start time 0: 7654321000000010, end time 0: 7654321000000019
perf_time__parse_for_ranges("10%/1,10%/2")
first_sample_time 11223344000000000 last_sample_time 11223344000000100
start time 0: 11223344000000000, end time 0: 11223344000000009
start time 1: 11223344000000010, end time 1: 11223344000000019
perf_time__parse_for_ranges("10%/1,10%/3,10%/10")
first_sample_time 11223344000000000 last_sample_time 11223344000000100
start time 0: 11223344000000000, end time 0: 11223344000000009
start time 1: 11223344000000020, end time 1: 11223344000000029
start time 2: 11223344000000090, end time 2: 11223344000000100
test child finished with 0
---- end ----
time utils: Ok
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-19-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Explicit time ranges never contain a percent sign whereas percentage
ranges always do, so it is possible to call the correct parser.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-18-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Simplify perf_time__parse_for_ranges() error paths slightly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-17-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Correct some punctuation and spelling and correct the format to show
that the time resolution is nanoseconds not microseconds.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-16-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Prevent percentage time range overlap. This is only a 1 nanosecond
change but makes the results more logical e.g. a sample cannot be in
both the first 10% and the second 20%.
Note, there is a later patch that adds a test for time-utils.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-15-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out set_percent_time() so it can be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-14-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, options allow only 1 explicit (non-percentage) time range.
In preparation for adding support for multiple explicit time ranges,
treat time ranges consistently.
Instead of treating some time ranges as inclusive and some as excluding
the end time, treat all time ranges as inclusive. This is only a 1
nanosecond change but is necessary to treat multiple explicit time
ranges in a consistent manner.
Note, there is a later patch that adds a test for time-utils.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-13-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set up time ranges for efficient time interval filtering using the new
"fast forward" facility.
Because decoding is done in time order, intel_pt_time_filter() needs to
look only at the next start or end timestamp - refer intel_pt_next_time().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-12-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement the lookahead callback to let the decoder access subsequent
buffers. intel_pt_lookahead() manages the buffer lifetime and calls the
decoder for each buffer until the decoder returns a non-zero value.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out intel_pt_get_buffer() so it can be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel PT decoding is done in time order. In order to support efficient time
interval filtering, add a facility to "fast forward" towards a particular
timestamp. That involves finding the right buffer, stepping to that buffer,
and then stepping forward PSBs. Because decoding must begin at a PSB,
"fast forward" stops at the last PSB that has a timestamp before the target
timestamp.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the decoder gets the next trace buffer, some state is reset if the
buffer is not consecutive to the previous buffer. Add a parameter
'reposition' so that can be done also to support a "fast forward"
facility.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out intel_pt_reposition() so it can be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out intel_pt_8b_tsc() so it can be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a callback function to enable the decoder to lookahead at subsequent
trace buffers. This will be used to implement a "fast forward" facility
which will be needed to support efficient time interval filtering.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instruction trace decoders can optimize output based on what time
intervals will be filtered, so pass that information in
itrace_synth_ops.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instruction trace decoders can optimize output based on what time
intervals will be filtered, so pass that information in
itrace_synth_ops.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instruction trace decoders can optimize output based on what time
intervals will be filtered, so pass that information in
itrace_synth_ops.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The clang bpf cmdline template has defined default value in the file
tools/perf/util/llvm-utils.c, which has been changed for several times.
This patch updates the documentation to reflect the latest default value
for the configuration llvm.clang-bpf-cmd-template.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Drayton <mbd@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Fixes: d35b168c3d ("perf bpf: Give precedence to bpf header dir")
Fixes: cb76371441 ("perf llvm: Allow passing options to llc in addition to clang")
Fixes: 1b16fffa38 ("perf llvm-utils: Add bpf include path to clang command line")
Link: http://lkml.kernel.org/r/20190607143508.18141-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Suzuki noticed that this should be more useful in a generic header, and
after looking I noticed we have it already in our copy of
include/linux/bits.h in tools/include, so just use it, test built on
x86-64 and ubuntu 19.04 with:
perfbuilder@46646c9e848e:/$ aarch64-linux-gnu-gcc --version |& head -1
aarch64-linux-gnu-gcc (Ubuntu/Linaro 8.3.0-6ubuntu1) 8.3.0
perfbuilder@46646c9e848e:/$
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lkml.kernel.org/r/68c1c548-33cd-31e8-100d-7ffad008c7b2@arm.com
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org,
Link: https://lkml.kernel.org/n/tip-69pd3mqvxdlh2shddsc7yhyv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds the necessary intelligence to properly compute the value
of 'old' and 'head' when operating in snapshot mode. That way we can
get the latest information in the AUX buffer and be compatible with the
generic AUX ring buffer mechanic.
Tester notes:
> Leo, have you had the chance to test/review this one? Suzuki?
Sure. I applied this patch on the perf/core branch (with latest
commit 3e4fbf36c1e3 'perf augmented_raw_syscalls: Move reading
filename to the loop') and passed testing with below steps:
# perf record -e cs_etm/@tmc_etr0/ -S -m,64 --per-thread ./sort &
[1] 19097
Bubble sorting array of 30000 elements
# kill -USR2 19097
# kill -USR2 19097
# kill -USR2 19097
[ perf record: Woken up 4 times to write data ]
[ perf record: Captured and wrote 0.753 MB perf.data ]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190605161633.12245-1-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'die' info isn't in the same array as core and socket ids, and we
missed the 'dies' string list, that comes right after the 'core' +
'socket' id variable length array, followed by the VLA for the dies.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: c9cb12c5ba08 ("perf header: Add die information in CPU topology")
Link: https://lkml.kernel.org/n/tip-nubi6mxp2n8ofvlx7ph6k3h6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The existing "thread_siblings" and "thread_siblings_list" attribute will
be deprecated.
Use the new CPU topology sysfs attributes, "core_cpus" and
"core_cpus_list", which are synonymous with the deprecated attributes.
Check the new name first. If not available, use the deprecated name to
be compatible with old kernel.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1559688644-106558-5-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "sibling cores" actually shows the sibling CPUs of a socket. The
name "sibling cores" is very misleading.
Rename "sibling cores" to "sibling sockets"
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1559688644-106558-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is useful to aggregate counts per die. E.g. Uncore becomes die-scope
on Xeon Cascade Lake-AP.
Introduce a new option "--per-die" to support per-die aggregation.
The global id for each core has been changed to socket + die id + core
id. The global id for each die is socket + die id.
Add die information for per-core aggregation. The output of per-core
aggregation will be changed from "S0-C0" to "S0-D0-C0". Any scripts
which rely on the output format of per-core aggregation probably be
broken.
For 'perf stat record/report', there is no die information when
processing the old perf.data. The per-die result will be the same as
per-socket.
Committer notes:
Renamed 'die' variable to 'die_id' to fix the build in some systems:
CC /tmp/build/perf/builtin-script.o
cc1: warnings being treated as errors
builtin-stat.c: In function 'perf_env__get_die':
builtin-stat.c:963: error: declaration of 'die' shadows a global declaration
util/util.h:19: error: shadowed declaration is here
mv: cannot stat `/tmp/build/perf/.builtin-stat.o.tmp': No such file or directory
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-bsnhx7vgsuu6ei307mw60mbj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the new CPUID.1F, a new level type of CPU topology, 'die', is
introduced. The 'die' information in CPU topology should be added in
perf header.
To be compatible with old perf.data, the patch checks the section size
before reading the die information. The new info is added at the end of
the cpu_topology section, the old perf tool ignores the extra data. It
never reads data crossing the section boundary.
The new perf tool with the patch can be used on legacy kernel. Add a new
function has_die_topology() to check if die topology information is
supported by kernel. The function only check X86 and CPU 0. Assuming
other CPUs have same topology.
Use similar method for core and socket to support die id and sibling
dies string.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1559688644-106558-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is no function to retrieve die id information of a given CPU.
Add cpu_map__get_die_id() to retrieve die id information.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1559688644-106558-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for CPU-wide trace scenarios by correlating range packets
with timestamp packets. That way range packets received on different
ETMQ/traceID channels can be processed and synthesized in chronological
order.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-18-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch deals with timestamp packets received from the decoding
library in order to give the front end packet processing loop a handle
on the time instruction conveyed by range packets have been executed at.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-17-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link contextID packets received from the decoder with the perf tool
thread mechanic so that we know the specifics of the process currently
executing.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-16-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When operating in CPU-wide trace mode with a source/sink topology of N:1
packets with multiple traceID will end up in the same cs_etm_queue. In
order to properly decode packets they need to be split in different
queues, i.e one queue per traceID.
As such add support for multiple traceID per cs_etm_queue by adding a
new cs_etm_traceid_queue every time a new traceID is discovered in the
trace stream.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-15-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When working with CPU-wide traces different traceID may be found in the
same stream. As such we need to use the decoder callback that provides
the traceID in order to know the thread context being decoded.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-14-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tid/pid fields of structure cs_etm_queue are CPU dependent and as
such need to be part of the cs_etm_traceid_queue in order to support
CPU-wide trace scenarios.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-13-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
