The function calls flowi4_init_output() to initialize an IPv4 flow key
with which it then performs a FIB lookup using ip_route_output_flow().
'arg->tos' with which the TOS value in the IPv4 flow key (flowi4_tos) is
initialized contains the full DS field. Unmask the upper DSCP bits so
that in the future the FIB lookup could be performed according to the
full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function returns a value that is used to initialize 'flowi4_tos'
before being passed to the FIB lookup API in the following call chain:
xfrm_bundle_create()
tos = xfrm_get_tos(fl, family)
xfrm_dst_lookup(..., tos, ...)
__xfrm_dst_lookup(..., tos, ...)
xfrm4_dst_lookup(..., tos, ...)
__xfrm4_dst_lookup(..., tos, ...)
fl4->flowi4_tos = tos
__ip_route_output_key(net, fl4)
Unmask the upper DSCP bits so that in the future the output route lookup
could be performed according to the full DSCP value.
Remove IPTOS_RT_MASK since it is no longer used.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
build_sk_flow_key() and __build_flow_key() are used to build an IPv4
flow key before calling one of the FIB lookup APIs.
Unmask the upper DSCP bits so that in the future the lookup could be
performed according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function is used by a few socket types to retrieve the TOS value
with which to perform the FIB lookup for packets sent through the socket
(flowi4_tos). If a DS field was passed using the IP_TOS control message,
then it is used. Otherwise the one specified via the IP_TOS socket
option.
Unmask the upper DSCP bits so that in the future the lookup could be
performed according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function is used to read the DS field that was stored in IPv4
sockets via the IP_TOS socket option so that it could be used to
initialize the flowi4_tos field before resolving an output route.
Unmask the upper DSCP bits so that in the future the output route lookup
could be performed according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function is called to resolve a route for an ICMP message that is
sent in response to a situation. Based on the type of the generated ICMP
message, the function is either passed the DS field of the packet that
generated the ICMP message or a DS field that is derived from it.
Unmask the upper DSCP bits before resolving and output route via
ip_route_output_key_hash() so that in the future the lookup could be
performed according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unmask the upper DSCP bits so that in the future output routes could be
looked up according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unmask the upper DSCP bits when looking up an output route via the
RTM_GETROUTE netlink message so that in the future the lookup could be
performed according to the full DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two fields, page_pools and *irq_moder, were added to struct net_device
in commit 083772c9f9 ("net: page_pool: record pools per netdev") and
commit f750dfe825 ("ethtool: provide customized dim profile
management"), respectively.
Add both to the net_cachelines documentation, as well.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240829155742.366584-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
icmp: avoid possible side-channels attacks
Keyu Man reminded us that linux ICMP rate limiting was still allowing
side-channels attacks.
Quoting the fine document [1]:
4.4 Private Source Port Scan Method
...
We can then use the same global ICMP rate limit as a side
channel to infer if such an ICMP message has been triggered. At
first glance, this method can work but at a low speed of one port
per second, due to the per-IP rate limit on ICMP messages.
Surprisingly, after we analyze the source code of the ICMP rate
limit implementation, we find that the global rate limit is checked
prior to the per-IP rate limit. This means that even if the per-IP
rate limit may eventually determine that no ICMP reply should be
sent, a packet is still subjected to the global rate limit check and one
token is deducted. Ironically, such a decision is consciously made
by Linux developers to avoid invoking the expensive check of the
per-IP rate limit [ 22], involving a search process to locate the per-IP
data structure.
This effectively means that the per-IP rate limit can be disre-
garded for the purpose of our side channel based scan, as it only
determines if the final ICMP reply is generated but has nothing to
do with the global rate limit counter decrement. As a result, we can
continue to use roughly the same scan method as efficient as before,
achieving 1,000 ports per second
...
This series :
1) Changes the order of the two rate limiters to fix the issue.
2-3) Make the 'host-wide' rate limiter a per-netns one.
[1]
Link: https://dl.acm.org/doi/pdf/10.1145/3372297.3417280
====================
Link: https://patch.msgid.link/20240829144641.3880376-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previous patch made ICMP rate limits per netns, it makes sense
to allow each netns to change the associated sysctl.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240829144641.3880376-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Host wide ICMP ratelimiter should be per netns, to provide better isolation.
Following patch in this series makes the sysctl per netns.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240829144641.3880376-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ICMP messages are ratelimited :
After the blamed commits, the two rate limiters are applied in this order:
1) host wide ratelimit (icmp_global_allow())
2) Per destination ratelimit (inetpeer based)
In order to avoid side-channels attacks, we need to apply
the per destination check first.
This patch makes the following change :
1) icmp_global_allow() checks if the host wide limit is reached.
But credits are not yet consumed. This is deferred to 3)
2) The per destination limit is checked/updated.
This might add a new node in inetpeer tree.
3) icmp_global_consume() consumes tokens if prior operations succeeded.
This means that host wide ratelimit is still effective
in keeping inetpeer tree small even under DDOS.
As a bonus, I removed icmp_global.lock as the fast path
can use a lock-free operation.
Fixes: c0303efeab ("net: reduce cycles spend on ICMP replies that gets rate limited")
Fixes: 4cdf507d54 ("icmp: add a global rate limitation")
Reported-by: Keyu Man <keyu.man@email.ucr.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240829144641.3880376-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using ERR_CAST() is more reasonable and safer, When it is necessary
to convert the type of an error pointer and return it.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240829095509.3151987-1-yanzhen@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As opposed to open-code, using the ERR_CAST macro clearly indicates that
this is a pointer to an error value and a type conversion was performed.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20240829021253.3066-1-shenlichuan@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FUJITA Tomonori says:
====================
net: phy: add Applied Micro QT2025 PHY driver
This patchset adds a PHY driver for Applied Micro Circuits Corporation
QT2025.
The first patch adds Rust equivalent to include/linux/sizes.h, makes
code more readable. The 2-5th patches update the PHYLIB Rust bindings.
The 4th and 5th patches have been reviewed previously in a different
thread [1].
QT2025 PHY support was implemented as a part of an Ethernet driver for
Tehuti Networks TN40xx chips. Multiple vendors (DLink, Asus, Edimax,
QNAP, etc) developed adapters based on TN40xx chips. Tehuti Networks
went out of business and the driver wasn't merged into mainline. But
it's still distributed with some of the hardware (and also available
on some vendor sites).
The original driver handles multiple PHY hardware (AMCC QT2025, TI
TLK10232, Aqrate AQR105, and Marvell MV88X3120, MV88X3310, and
MV88E2010). I divided the original driver into MAC and PHY drivers and
implemented a QT2025 PHY driver in Rust.
The MAC driver for Tehuti Networks TN40xx chips was already merged in
6.11-rc1. The MAC and this PHY drivers have been tested with Edimax
EN-9320SFP+ 10G network adapter.
[1] https://lore.kernel.org/rust-for-linux/20240607052113.69026-1-fujita.tomonori@gmail.com/
v7:
- add Trevor as Reviewer to MAINTAINERS file entry
- add Trevor Reviewed-by
- add/fix comments
- replace uppercase hex with lowercase
- remove unnecessary code
- update the commit message (1st patch)
v6: https://lore.kernel.org/netdev/20240820225719.91410-1-fujita.tomonori@gmail.com/
- improve comments
- make the logic to load firmware more readable
- add Copy trait to reg::{C22 and C45}
- add Trevor Reviewed-by
v5: https://lore.kernel.org/netdev/20240819005345.84255-1-fujita.tomonori@gmail.com/
- fix the comments (3th patch)
- add RUST_FW_LOADER_ABSTRACTIONS dependency
- add Andrew and Benno Reviewed-by
v4: https://lore.kernel.org/netdev/20240817051939.77735-1-fujita.tomonori@gmail.com/
- fix the comments
- add Andrew's Reviewed-by
- fix the order of tags
- remove wrong endianness conversion
v3: https://lore.kernel.org/netdev/20240804233835.223460-1-fujita.tomonori@gmail.com/
- use addr_of_mut!` to avoid intermediate mutable reference
- update probe callback's Safety comment
- add MODULE_FIRMWARE equivalent
- add Alice's Reviewed-by
v2: https://lore.kernel.org/netdev/20240731042136.201327-1-fujita.tomonori@gmail.com/
- add comments in accordance with the hw datasheet
- unify C22 and C45 APIs
- load firmware in probe callback instead of config_init
- use firmware API
- handle firmware endian
- check firmware size
- use SZ_*K constants
- avoid confusing phy_id variable
v1: https://lore.kernel.org/netdev/20240415104701.4772-1-fujita.tomonori@gmail.com/
====================
rom: FUJITA Tomonori <fujita.tomonori@gmail.com>
To: netdev@vger.kernel.org
Cc: rust-for-linux@vger.kernel.org, andrew@lunn.ch,
tmgross@umich.edu, miguel.ojeda.sandonis@gmail.com,
benno.lossin@proton.me, aliceryhl@google.com
Subject: [PATCH net-next v7 0/6] net: phy: add Applied Micro QT2025 PHY driver
Date: Sat, 24 Aug 2024 02:06:10 +0000 [thread overview]
Message-ID: <20240824020617.113828-1-fujita.tomonori@gmail.com> (raw)
This patchset adds a PHY driver for Applied Micro Circuits Corporation
QT2025.
The first patch adds Rust equivalent to include/linux/sizes.h, makes
code more readable. The 2-5th patches update the PHYLIB Rust bindings.
The 4th and 5th patches have been reviewed previously in a different
thread [1].
QT2025 PHY support was implemented as a part of an Ethernet driver for
Tehuti Networks TN40xx chips. Multiple vendors (DLink, Asus, Edimax,
QNAP, etc) developed adapters based on TN40xx chips. Tehuti Networks
went out of business and the driver wasn't merged into mainline. But
it's still distributed with some of the hardware (and also available
on some vendor sites).
The original driver handles multiple PHY hardware (AMCC QT2025, TI
TLK10232, Aqrate AQR105, and Marvell MV88X3120, MV88X3310, and
MV88E2010). I divided the original driver into MAC and PHY drivers and
implemented a QT2025 PHY driver in Rust.
The MAC driver for Tehuti Networks TN40xx chips was already merged in
6.11-rc1. The MAC and this PHY drivers have been tested with Edimax
EN-9320SFP+ 10G network adapter.
[1] https://lore.kernel.org/rust-for-linux/20240607052113.69026-1-fujita.tomonori@gmail.com/
v7:
- add Trevor as Reviewer to MAINTAINERS file entry
- add Trevor Reviewed-by
- add/fix comments
- replace uppercase hex with lowercase
- remove unnecessary code
- update the commit message (1st patch)
v6: https://lore.kernel.org/netdev/20240820225719.91410-1-fujita.tomonori@gmail.com/
- improve comments
- make the logic to load firmware more readable
- add Copy trait to reg::{C22 and C45}
- add Trevor Reviewed-by
v5: https://lore.kernel.org/netdev/20240819005345.84255-1-fujita.tomonori@gmail.com/
- fix the comments (3th patch)
- add RUST_FW_LOADER_ABSTRACTIONS dependency
- add Andrew and Benno Reviewed-by
v4: https://lore.kernel.org/netdev/20240817051939.77735-1-fujita.tomonori@gmail.com/
- fix the comments
- add Andrew's Reviewed-by
- fix the order of tags
- remove wrong endianness conversion
v3: https://lore.kernel.org/netdev/20240804233835.223460-1-fujita.tomonori@gmail.com/
- use addr_of_mut!` to avoid intermediate mutable reference
- update probe callback's Safety comment
- add MODULE_FIRMWARE equivalent
- add Alice's Reviewed-by
v2: https://lore.kernel.org/netdev/20240731042136.201327-1-fujita.tomonori@gmail.com/
- add comments in accordance with the hw datasheet
- unify C22 and C45 APIs
- load firmware in probe callback instead of config_init
- use firmware API
- handle firmware endian
- check firmware size
- use SZ_*K constants
- avoid confusing phy_id variable
v1: https://lore.kernel.org/netdev/20240415104701.4772-1-fujita.tomonori@gmail.com/
Signed-off-by: David S. Miller <davem@davemloft.net>
rom: FUJITA Tomonori <fujita.tomonori@gmail.com>
To: netdev@vger.kernel.org
Cc: rust-for-linux@vger.kernel.org, andrew@lunn.ch,
tmgross@umich.edu, miguel.ojeda.sandonis@gmail.com,
benno.lossin@proton.me, aliceryhl@google.com
Subject: [PATCH net-next v7 0/6] net: phy: add Applied Micro QT2025 PHY driver
Date: Sat, 24 Aug 2024 02:06:10 +0000 [thread overview]
Message-ID: <20240824020617.113828-1-fujita.tomonori@gmail.com> (raw)
This patchset adds a PHY driver for Applied Micro Circuits Corporation
QT2025.
The first patch adds Rust equivalent to include/linux/sizes.h, makes
code more readable. The 2-5th patches update the PHYLIB Rust bindings.
The 4th and 5th patches have been reviewed previously in a different
thread [1].
QT2025 PHY support was implemented as a part of an Ethernet driver for
Tehuti Networks TN40xx chips. Multiple vendors (DLink, Asus, Edimax,
QNAP, etc) developed adapters based on TN40xx chips. Tehuti Networks
went out of business and the driver wasn't merged into mainline. But
it's still distributed with some of the hardware (and also available
on some vendor sites).
The original driver handles multiple PHY hardware (AMCC QT2025, TI
TLK10232, Aqrate AQR105, and Marvell MV88X3120, MV88X3310, and
MV88E2010). I divided the original driver into MAC and PHY drivers and
implemented a QT2025 PHY driver in Rust.
The MAC driver for Tehuti Networks TN40xx chips was already merged in
6.11-rc1. The MAC and this PHY drivers have been tested with Edimax
EN-9320SFP+ 10G network adapter.
[1] https://lore.kernel.org/rust-for-linux/20240607052113.69026-1-fujita.tomonori@gmail.com/
v7:
- add Trevor as Reviewer to MAINTAINERS file entry
- add Trevor Reviewed-by
- add/fix comments
- replace uppercase hex with lowercase
- remove unnecessary code
- update the commit message (1st patch)
v6: https://lore.kernel.org/netdev/20240820225719.91410-1-fujita.tomonori@gmail.com/
- improve comments
- make the logic to load firmware more readable
- add Copy trait to reg::{C22 and C45}
- add Trevor Reviewed-by
v5: https://lore.kernel.org/netdev/20240819005345.84255-1-fujita.tomonori@gmail.com/
- fix the comments (3th patch)
- add RUST_FW_LOADER_ABSTRACTIONS dependency
- add Andrew and Benno Reviewed-by
v4: https://lore.kernel.org/netdev/20240817051939.77735-1-fujita.tomonori@gmail.com/
- fix the comments
- add Andrew's Reviewed-by
- fix the order of tags
- remove wrong endianness conversion
v3: https://lore.kernel.org/netdev/20240804233835.223460-1-fujita.tomonori@gmail.com/
- use addr_of_mut!` to avoid intermediate mutable reference
- update probe callback's Safety comment
- add MODULE_FIRMWARE equivalent
- add Alice's Reviewed-by
v2: https://lore.kernel.org/netdev/20240731042136.201327-1-fujita.tomonori@gmail.com/
- add comments in accordance with the hw datasheet
- unify C22 and C45 APIs
- load firmware in probe callback instead of config_init
- use firmware API
- handle firmware endian
- check firmware size
- use SZ_*K constants
- avoid confusing phy_id variable
v1: https://lore.kernel.org/netdev/20240415104701.4772-1-fujita.tomonori@gmail.com/
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
This driver supports Applied Micro Circuits Corporation QT2025 PHY,
based on a driver for Tehuti Networks TN40xx chips.
The original driver for TN40xx chips supports multiple PHY hardware
(AMCC QT2025, TI TLK10232, Aqrate AQR105, and Marvell 88X3120,
88X3310, and MV88E2010). This driver is extracted from the original
driver and modified to a PHY driver in Rust.
This has been tested with Edimax EN-9320SFP+ 10G network adapter.
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add unified genphy_read_status function for C22 and C45
registers. Instead of having genphy_c22 and genphy_c45 methods, this
unifies genphy_read_status functions for C22 and C45.
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the unified read/write API for C22 and C45 registers. The
abstractions support access to only C22 registers now. Instead of
adding read/write_c45 methods specifically for C45, a new reg module
supports the unified API to access C22 and C45 registers with trait,
by calling an appropriate phylib functions.
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement AsRef<kernel::device::Device> trait for Device. A PHY driver
needs a reference to device::Device to call the firmware API.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support phy_driver probe callback, used to set up device-specific
structures.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add rust equivalent to include/linux/sizes.h, makes code more
readable. Only SZ_*K that QT2025 PHY driver uses are added.
Make generated constants accessible with a proper type.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A range of MSIX vectors are allocated at initialization for the number
needed for RocE and L2. During run-time, if the user increases or
decreases the number of L2 rings, all the MSIX vectors have to be
freed and a new range has to be allocated. This is not optimal and
causes disruptions to RoCE traffic every time there is a change in L2
MSIX.
If the system supports dynamic MSIX allocations, use dynamic
allocation to add new L2 MSIX vectors or free unneeded L2 MSIX
vectors. RoCE traffic is not affected using this scheme.
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20240828183235.128948-10-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If dynamic MSIX allocation is supported, additional MSIX can be
allocated at run-time without reinitializing the existing MSIX entries.
The first step to support this dynamic scheme is to allocate a large
enough bp->irq_tbl if dynamic allocation is supported.
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-9-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new pci_alloc_irq_vectors() and pci_free_irq_vectors() to
replace the deprecated pci_enable_msix_range() and pci_disable_msix().
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-8-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In legacy INTX mode, a register is mapped so that the INTX handler can
read it to determine if the NIC is the source of the interrupt. This
and all the related macros are no longer needed now that INTX is no
longer supported.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we only support MSIX, the BNXT_FLAG_USING_MSIX is always true.
Remove it and any if conditions checking for it. Remove the INTX
handler and associated logic.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Firmware has deprecated support for legacy INTX in 2022 (since v2.27)
and INTX hasn't been tested for many years before that. INTX was
only used as a fallback mechansim in case MSIX wasn't available. MSIX
is always supported by all firmware. If MSIX capability in PCI config
space is not found during probe, abort.
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With recent changes in the .ndo_set_vf_*() guidelines, resubmitting
this patch that was reverted eariler in 2023:
c27153682e ("Revert "bnxt_en: Support QOS and TPID settings for the SRIOV VLAN")
Add these missing settings in the .ndo_set_vf_vlan() method.
Older firmware does not support the TPID setting so check for
proper support.
Remove the unused BNXT_VF_QOS flag.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for retrieving crash dump using ethtool -w on the
supported interface.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Newer firmware supports automatic DMA of crash dump to host memory
when it crashes. If the feature is supported, allocate the required
memory using the existing context memory infrastructure. Communicate
the page table containing the DMA addresses to the firmware.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jon Maloy says:
====================
Adding SO_PEEK_OFF for TCPv6
Adding SO_PEEK_OFF for TCPv6 and selftest for both TCPv4 and TCPv6
====================
Link: https://patch.msgid.link/20240828183752.660267-1-jmaloy@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We add a selftest to check that the new feature added in
commit 05ea491641 ("tcp: add support for SO_PEEK_OFF socket option")
works correctly.
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Tested-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Link: https://patch.msgid.link/20240828183752.660267-3-jmaloy@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When doing further testing of the recently added SO_PEEK_OFF feature
for TCP I realized I had omitted to add it for TCP/IPv6.
I do that here.
Fixes: 05ea491641 ("tcp: add support for SO_PEEK_OFF socket option")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Tested-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20240828183752.660267-2-jmaloy@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Someone reported on GitHub that the YNL NIPA test is failing
when run locally. The test builds the tools, and it hits:
netdev.c:82:9: warning: ignoring return value of ‘scanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result]
82 | scanf("%d", &ifindex);
I can't repro this on my setups but error seems clear enough.
Link: https://github.com/linux-netdev/nipa/discussions/37
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20240828173609.2951335-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The deprecated helper strcpy() performs no bounds checking on the
destination buffer. This could result in linear overflows beyond
the end of the buffer, leading to all kinds of misbehaviors.
The safe replacement is strscpy() [1].
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
use dev_err_probe() instead of dev_err() to simplify the error path and
standardize the format of the error code.
Signed-off-by: Yang Ruibin <11162571@vivo.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240828122650.1324246-1-11162571@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the IS_ERR_OR_NULL() helper instead of open-coding a
NULL and an error pointer checks to simplify the code and
improve readability.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240828122336.3697176-1-lihongbo22@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using dev_err_cast_probe() to simplify the code.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Link: https://patch.msgid.link/20240828121805.3696631-1-lihongbo22@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stefan Wahren says:
====================
net: vertexcom: mse102x: Minor clean-ups
This series provides some minor clean-ups for the Vertexcom MSE102x
driver.
====================
Link: https://patch.msgid.link/20240827191000.3244-1-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
